// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-#include "qca955x.dtsi"
+#include "qca955x_senao_loader.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
-#include <dt-bindings/mtd/partitions/uimage.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "engenius,enstationac-v1", "qca,qca9557";
compatible = "gpio-leds";
led_power: power {
- label = "amber:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan {
- label = "green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
};
};
-
- virtual_flash {
- compatible = "mtd-concat";
-
- devices = <&fwconcat0 &fwconcat1>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- compatible = "openwrt,uimage", "denx,uimage";
- openwrt,ih-magic = <IH_MAGIC_OKLI>;
- label = "firmware";
- reg = <0x0 0x0>;
- };
- };
- };
};
-&spi {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <40000000>;
+&partitions {
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
- partitions {
- compatible = "fixed-partitions";
+ nvmem-layout {
+ compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
- partition@0 {
- label = "u-boot";
- reg = <0x000000 0x040000>;
- read-only;
- };
-
- partition@40000 {
- label = "u-boot-env";
- reg = <0x040000 0x010000>;
- };
-
- partition@50000 {
- label = "custom";
- reg = <0x050000 0x050000>;
- read-only;
- };
-
- partition@a0000 {
- label = "loader";
- reg = <0x0a0000 0x010000>;
- read-only;
- };
-
- fwconcat1: partition@b0000 {
- label = "fwconcat1";
- reg = <0x0b0000 0x170000>;
- };
-
- partition@220000 {
- label = "fakeroot";
- reg = <0x220000 0x010000>;
- read-only;
- };
-
- fwconcat0: partition@230000 {
- label = "fwconcat0";
- reg = <0x230000 0xb40000>;
- };
-
- partition@d70000 {
- label = "failsafe";
- reg = <0xd70000 0x280000>;
- read-only;
+ macaddr_art_0: macaddr@0 {
+ compatible = "mac-base";
+ reg = <0x0 0x6>;
+ #nvmem-cell-cells = <1>;
};
- art: partition@ff0000 {
- label = "art";
- reg = <0xff0000 0x010000>;
- read-only;
+ cal_art_5000: calibration@5000 {
+ reg = <0x5000 0x844>;
};
};
};
ð0 {
status = "okay";
- mtd-mac-address = <&art 0x0>;
+ nvmem-cells = <&macaddr_art_0 0>;
+ nvmem-cell-names = "mac-address";
phy-handle = <&phy1>;
phy-mode = "rgmii-id";
ð1 {
status = "okay";
- mtd-mac-address = <&art 0x0>;
- mtd-mac-address-increment = <1>;
+ nvmem-cells = <&macaddr_art_0 1>;
+ nvmem-cell-names = "mac-address";
phy-handle = <&phy2>;
&pcie0 {
status = "okay";
- wifi@0,0,0 {
+ wifi@0,0 {
compatible = "qcom,ath10k";
- reg = <0x0 0 0 0 0>;
- qca,no-eeprom;
+ reg = <0x0000 0 0 0 0>;
+ nvmem-cells = <&cal_art_5000>, <&macaddr_art_0 2>;
+ nvmem-cell-names = "calibration", "mac-address";
};
};