ath79: update WA/XC devices UBNT_VERSION to 8.7.4
[openwrt/staging/wigyori.git] / target / linux / ath79 / dts / qca9563_tplink_archer-x6-v2.dtsi
index f1a1f5673d43985249047a58a766e42e4cce36a9..34f639f40b132f92a2adf73887357c79417ba1e5 100644 (file)
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
 
 #include "qca956x.dtsi"
 
-/ {
-       chosen {
-               bootargs = "console=ttyS0,115200n8";
-       };
-
-       aliases {
-               led-boot = &led_power;
-               led-failsafe = &led_power;
-               led-running = &led_power;
-               led-upgrade = &led_power;
-               label-mac-device = &eth0;
-       };
-
-       leds {
-               compatible = "gpio-leds";
-
-               led_power: power {
-                       label = "tp-link:green:power";
-                       gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
-                       default-state = "on";
-               };
-
-               wlan2g {
-                       label = "tp-link:green:wlan2g";
-                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-                       linux,default-trigger = "phy1tpt";
-               };
-
-               wlan5g {
-                       label = "tp-link:green:wlan5g";
-                       gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
-                       linux,default-trigger = "phy0tpt";
-               };
-
-               lan {
-                       label = "tp-link:green:lan";
-                       gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
-               };
-
-               wan {
-                       label = "tp-link:green:wan";
-                       gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
-               };
-
-               wan_fail {
-                       label = "tp-link:amber:wan";
-                       gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
-               };
-
-               wps {
-                       label = "tp-link:green:wps";
-                       gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
-               };
-       };
-
-       keys {
-               compatible = "gpio-keys";
-
-               reset {
-                       label = "Reset button";
-                       linux,code = <KEY_RESTART>;
-                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
-                       debounce-interval = <60>;
-               };
-
-               wps {
-                       label = "WPS button";
-                       linux,code = <KEY_WPS_BUTTON>;
-                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-                       debounce-interval = <60>;
-               };
-       };
-};
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 &pcie {
        status = "okay";
 };
 
-&uart {
-       status = "okay";
-};
-
-&gpio {
-       status = "okay";
-};
-
-&spi {
-       status = "okay";
-
-       num-cs = <1>;
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <25000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x000000 0x020000>;
-                               read-only;
-                       };
-
-                       mac: partition@20000 {
-                               label = "mac";
-                               reg = <0x020000 0x010000>;
-                               read-only;
-                       };
-
-                       partition@30000 {
-                               compatible = "denx,uimage";
-                               label = "firmware";
-                               reg = <0x030000 0x7a0000>;
-                       };
-
-                       partition@7d0000 {
-                               label = "tplink";
-                               reg = <0x7d0000 0x020000>;
-                               read-only;
-                       };
-
-                       art: partition@7f0000 {
-                               label = "art";
-                               reg = <0x7f0000 0x010000>;
-                               read-only;
-                       };
-               };
-       };
-};
-
 &mdio0 {
        status = "okay";
 
-       phy-mask = <0>;
-
        phy0: ethernet-phy@0 {
                reg = <0>;
                phy-mode = "sgmii";
        status = "okay";
 
        phy-mode = "sgmii";
-       mtd-mac-address = <&mac 0x8>;
        phy-handle = <&phy0>;
 };
 
 &wmac {
        status = "okay";
-
-       mtd-cal-data = <&art 0x1000>;
-       mtd-mac-address = <&mac 0x8>;
 };