[ramips] add GPIO configuration feature

SVN-Revision: 17512

diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/common.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/common.h
index 9e0fdeca6a8ef866a4ca897424b8f084d30c8fc4..4fd732432c90993ca8c09ea1ac12a0a23aa99d0d 100644 (file)
--- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/common.h
+++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/common.h
@@ -17,6 +17,7 @@ void __init ramips_intc_irq_init(unsigned intc_base, unsigned irq,
 u32 ramips_intc_get_status(void);
 
 void __init ramips_soc_setup(void);
 u32 ramips_intc_get_status(void);
 
 void __init ramips_soc_setup(void);

+void __init ramips_gpio_init(void);

 void __init ramips_early_serial_setup(int line, unsigned base, unsigned freq,
                                      unsigned irq);
 
 void __init ramips_early_serial_setup(int line, unsigned base, unsigned freq,
                                      unsigned irq);
 

diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt288x.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt288x.h
index 445bafa3d00bbc0bb7be1375505e15807d59d9ef..a804488f085b76f27745d3eb5cb49a2bd26f724d 100644 (file)
--- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt288x.h
+++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt288x.h
@@ -1,7 +1,7 @@
 /*
  * Ralink RT288x SoC specific definitions
  *
 /*
  * Ralink RT288x SoC specific definitions
  *

- * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>

  * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
  *
  * Parts of this file are based on Ralink's 2.6.21 BSP
  * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
  *
  * Parts of this file are based on Ralink's 2.6.21 BSP


@@ -68,4 +68,6 @@ static inline u32 rt288x_memc_rr(unsigned reg)
        return __raw_readl(rt288x_memc_base + reg);
 }
 
        return __raw_readl(rt288x_memc_base + reg);
 }
 

+void rt288x_gpio_init(u32 mode) __init;
+

 #endif /* _RT228X_H_ */
 #endif /* _RT228X_H_ */

diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt288x_regs.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt288x_regs.h
index 98308ffe018710e940b5d8825b2d87d7e1273416..d29880611eff855942c628e6ebd0e39676e685dc 100644 (file)
--- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt288x_regs.h
+++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt288x_regs.h
@@ -46,6 +46,7 @@
 #define SYSC_REG_SYSTEM_CONFIG 0x010   /* System Configuration */
 #define SYSC_REG_RESET_CTRL    0x034   /* Reset Control*/
 #define SYSC_REG_RESET_STATUS  0x038   /* Reset Status*/
 #define SYSC_REG_SYSTEM_CONFIG 0x010   /* System Configuration */
 #define SYSC_REG_RESET_CTRL    0x034   /* Reset Control*/
 #define SYSC_REG_RESET_STATUS  0x038   /* Reset Status*/

+#define SYSC_REG_GPIO_MODE     0x060   /* GPIO Purpose Select */

 #define SYSC_REG_IA_ADDRESS    0x310   /* Illegal Access Address */
 #define SYSC_REG_IA_TYPE       0x314   /* Illegal Access Type */
 
 #define SYSC_REG_IA_ADDRESS    0x310   /* Illegal Access Address */
 #define SYSC_REG_IA_TYPE       0x314   /* Illegal Access Type */
 


@@ -75,6 +76,15 @@
 #define RT2880_RESET_FE                BIT(18)
 #define RT2880_RESET_PCM       BIT(19)
 
 #define RT2880_RESET_FE                BIT(18)
 #define RT2880_RESET_PCM       BIT(19)
 

+#define RT2880_GPIO_MODE_I2C   BIT(0)
+#define RT2880_GPIO_MODE_UART0 BIT(1)
+#define RT2880_GPIO_MODE_SPI   BIT(2)
+#define RT2880_GPIO_MODE_UART1 BIT(3)
+#define RT2880_GPIO_MODE_JTAG  BIT(4)
+#define RT2880_GPIO_MODE_MDIO  BIT(5)
+#define RT2880_GPIO_MODE_SDRAM BIT(6)
+#define RT2880_GPIO_MODE_PCI   BIT(7)
+

 #define RT2880_INTC_INT_TIMER0 BIT(0)
 #define RT2880_INTC_INT_TIMER1 BIT(1)
 #define RT2880_INTC_INT_UART0  BIT(2)
 #define RT2880_INTC_INT_TIMER0 BIT(0)
 #define RT2880_INTC_INT_TIMER1 BIT(1)
 #define RT2880_INTC_INT_UART0  BIT(2)

diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x.h
index c9d5b4458b8a84fb8d9e75f1a15fa87265ba98d9..195bfbe51ac8a0e56dcc0c26b43c020bf864585d 100644 (file)
--- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x.h
+++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x.h
@@ -73,4 +73,59 @@ static inline u32 rt305x_memc_rr(unsigned reg)
        return __raw_readl(rt305x_memc_base + reg);
 }
 
        return __raw_readl(rt305x_memc_base + reg);
 }
 

+#define RT305X_GPIO_I2C_SD     1
+#define RT305X_GPIO_I2C_SCLK   2
+#define RT305X_GPIO_SPI_EN     3
+#define RT305X_GPIO_SPI_CLK    4
+#define RT305X_GPIO_SPI_DOUT   5
+#define RT305X_GPIO_SPI_DIN    6
+/* GPIO 7-14 is shared between UART0, PCM  and I2S interfaces */
+#define RT305X_GPIO_7          7
+#define RT305X_GPIO_8          8
+#define RT305X_GPIO_9          9
+#define RT305X_GPIO_10         10
+#define RT305X_GPIO_11         11
+#define RT305X_GPIO_12         12
+#define RT305X_GPIO_13         13
+#define RT305X_GPIO_14         14
+#define RT305X_GPIO_UART1_TXD  15
+#define RT305X_GPIO_UART1_RXD  16
+#define RT305X_GPIO_JTAG_TDO   17
+#define RT305X_GPIO_JTAG_TDI   18
+#define RT305X_GPIO_JTAG_TMS   19
+#define RT305X_GPIO_JTAG_TCLK  20
+#define RT305X_GPIO_JTAG_TRST_N        21
+#define RT305X_GPIO_MDIO_MDC   22
+#define RT305X_GPIO_MDIO_MDIO  23
+#define RT305X_GPIO_SDRAM_MD16 24
+#define RT305X_GPIO_SDRAM_MD17 25
+#define RT305X_GPIO_SDRAM_MD18 26
+#define RT305X_GPIO_SDRAM_MD19 27
+#define RT305X_GPIO_SDRAM_MD20 28
+#define RT305X_GPIO_SDRAM_MD21 29
+#define RT305X_GPIO_SDRAM_MD22 30
+#define RT305X_GPIO_SDRAM_MD23 31
+#define RT305X_GPIO_SDRAM_MD24 32
+#define RT305X_GPIO_SDRAM_MD25 33
+#define RT305X_GPIO_SDRAM_MD26 34
+#define RT305X_GPIO_SDRAM_MD27 35
+#define RT305X_GPIO_SDRAM_MD28 36
+#define RT305X_GPIO_SDRAM_MD29 37
+#define RT305X_GPIO_SDRAM_MD30 38
+#define RT305X_GPIO_SDRAM_MD31 39
+#define RT305X_GPIO_GE0_TXD0   40
+#define RT305X_GPIO_GE0_TXD1   41
+#define RT305X_GPIO_GE0_TXD2   42
+#define RT305X_GPIO_GE0_TXD3   43
+#define RT305X_GPIO_GE0_TXEN   44
+#define RT305X_GPIO_GE0_TXCLK  45
+#define RT305X_GPIO_GE0_RXD0   46
+#define RT305X_GPIO_GE0_RXD1   47
+#define RT305X_GPIO_GE0_RXD2   48
+#define RT305X_GPIO_GE0_RXD3   49
+#define RT305X_GPIO_GE0_RXDV   50
+#define RT305X_GPIO_GE0_RXCLK  51
+
+void rt305x_gpio_init(u32 mode) __init;
+

 #endif /* _RT305X_H_ */
 #endif /* _RT305X_H_ */

diff --git a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x_regs.h b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x_regs.h
index d4a1920633b4d27c29bd28ee2afa237e91c1f16b..7f0666d5b1ee823a252fc8c4844429f8a2d88022 100644 (file)
--- a/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x_regs.h
+++ b/target/linux/ramips/files/arch/mips/include/asm/mach-ralink/rt305x_regs.h
@@ -49,6 +49,7 @@
 #define SYSC_REG_SYSTEM_CONFIG 0x010   /* System Configuration */
 #define SYSC_REG_RESET_CTRL    0x034   /* Reset Control*/
 #define SYSC_REG_RESET_STATUS  0x038   /* Reset Status*/
 #define SYSC_REG_SYSTEM_CONFIG 0x010   /* System Configuration */
 #define SYSC_REG_RESET_CTRL    0x034   /* Reset Control*/
 #define SYSC_REG_RESET_STATUS  0x038   /* Reset Status*/

+#define SYSC_REG_GPIO_MODE     0x060   /* GPIO Purpose Select */

 #define SYSC_REG_IA_ADDRESS    0x310   /* Illegal Access Address */
 #define SYSC_REG_IA_TYPE       0x314   /* Illegal Access Type */
 
 #define SYSC_REG_IA_ADDRESS    0x310   /* Illegal Access Address */
 #define SYSC_REG_IA_TYPE       0x314   /* Illegal Access Type */
 


@@ -61,6 +62,25 @@
 #define SYSTEM_CONFIG_CPUCLK_320       0x0
 #define SYSTEM_CONFIG_CPUCLK_384       0x1
 
 #define SYSTEM_CONFIG_CPUCLK_320       0x0
 #define SYSTEM_CONFIG_CPUCLK_384       0x1
 

+#define RT305X_GPIO_MODE_I2C           BIT(0)
+#define RT305X_GPIO_MODE_SPI           BIT(1)
+#define RT305X_GPIO_MODE_UART0_SHIFT   2
+#define RT305X_GPIO_MODE_UART0_MASK    0x7
+#define RT305X_GPIO_MODE_UART0(x)      ((x) << RT305X_GPIO_MODE_UART0_SHIFT)
+#define RT305X_GPIO_MODE_UARTF         0x0
+#define RT305X_GPIO_MODE_PCM_UARTF     0x1
+#define RT305X_GPIO_MODE_PCM_I2S       0x2
+#define RT305X_GPIO_MODE_I2S_UARTF     0x3
+#define RT305X_GPIO_MODE_PCM_GPIO      0x4
+#define RT305X_GPIO_MODE_GPIO_UARTF    0x5
+#define RT305X_GPIO_MODE_GPIO_I2S      0x6
+#define RT305X_GPIO_MODE_GPIO          0x7
+#define RT305X_GPIO_MODE_UART1         BIT(5)
+#define RT305X_GPIO_MODE_JTAG          BIT(6)
+#define RT305X_GPIO_MODE_MDIO          BIT(7)
+#define RT305X_GPIO_MODE_SDRAM         BIT(8)
+#define RT305X_GPIO_MODE_RGMII         BIT(9)
+

 #define RT305X_RESET_SYSTEM    BIT(0)
 #define RT305X_RESET_TIMER     BIT(8)
 #define RT305X_RESET_INTC      BIT(9)
 #define RT305X_RESET_SYSTEM    BIT(0)
 #define RT305X_RESET_TIMER     BIT(8)
 #define RT305X_RESET_INTC      BIT(9)

diff --git a/target/linux/ramips/files/arch/mips/ralink/common/gpio.c b/target/linux/ramips/files/arch/mips/ralink/common/gpio.c
index f882b925a598bcccff96b771ca99ed553dcfb16c..4e90df02472918553033f80f586f471dd1f097d1 100644 (file)
--- a/target/linux/ramips/files/arch/mips/ralink/common/gpio.c
+++ b/target/linux/ramips/files/arch/mips/ralink/common/gpio.c
@@ -220,5 +220,3 @@ __init int ramips_gpio_init(void)
 
        return 0;
 }
 
        return 0;
 }

-
-arch_initcall(ramips_gpio_init);

diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-rt-n15.c b/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-rt-n15.c
index be5c815cb578a6796c5b8495dc3e02b5488e2d0a..26f08845ba7f8e87214766701f21427b04381053 100644 (file)
--- a/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-rt-n15.c
+++ b/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-rt-n15.c
@@ -18,10 +18,14 @@
 #include <asm/mips_machine.h>
 #include <asm/mach-ralink/machine.h>
 #include <asm/mach-ralink/dev_gpio_leds.h>
 #include <asm/mips_machine.h>
 #include <asm/mach-ralink/machine.h>
 #include <asm/mach-ralink/dev_gpio_leds.h>

+#include <asm/mach-ralink/rt288x.h>
+#include <asm/mach-ralink/rt288x_regs.h>

 
 #include "devices.h"
 
 #define RT_N15_GPIO_LED_POWER          11
 
 #include "devices.h"
 
 #define RT_N15_GPIO_LED_POWER          11

+#define RT_N15_GPIO_BUTTON_WPS         0
+#define RT_N15_GPIO_BUTTON_RESET       12

 
 #ifdef CONFIG_MTD_PARTITIONS
 static struct mtd_partition rt_n15_partitions[] = {
 
 #ifdef CONFIG_MTD_PARTITIONS
 static struct mtd_partition rt_n15_partitions[] = {


@@ -73,6 +77,8 @@ static struct gpio_led rt_n15_leds_gpio[] __initdata = {
 
 static void __init rt_n15_init(void)
 {
 
 static void __init rt_n15_init(void)
 {

+       rt288x_gpio_init(RT2880_GPIO_MODE_UART0);
+

        rt288x_register_flash(0, &rt_n15_flash_data);
 
        ramips_register_gpio_leds(-1, ARRAY_SIZE(rt_n15_leds_gpio),
        rt288x_register_flash(0, &rt_n15_flash_data);
 
        ramips_register_gpio_leds(-1, ARRAY_SIZE(rt_n15_leds_gpio),

diff --git a/target/linux/ramips/files/arch/mips/ralink/rt288x/rt288x.c b/target/linux/ramips/files/arch/mips/ralink/rt288x/rt288x.c
index e7c3787e1b97ba7bd51959ad37cd73075ddea8c0..49a301a1e1e0f8a8fff6981e5498f44ee2cb77f9 100644 (file)
--- a/target/linux/ramips/files/arch/mips/ralink/rt288x/rt288x.c
+++ b/target/linux/ramips/files/arch/mips/ralink/rt288x/rt288x.c
@@ -1,7 +1,7 @@
 /*
  * Ralink RT288x SoC specific setup
  *
 /*
  * Ralink RT288x SoC specific setup
  *

- * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>

  * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
  *
  * Parts of this file are based on Ralink's 2.6.21 BSP
  * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
  *
  * Parts of this file are based on Ralink's 2.6.21 BSP


@@ -14,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/module.h>

+#include <linux/gpio.h>

 
 #include <asm/mach-ralink/common.h>
 #include <asm/mach-ralink/rt288x.h>
 
 #include <asm/mach-ralink/common.h>
 #include <asm/mach-ralink/rt288x.h>


@@ -73,3 +74,35 @@ void __init rt288x_detect_sys_freq(void)
        rt288x_sys_freq = rt288x_cpu_freq / 2;
 }
 
        rt288x_sys_freq = rt288x_cpu_freq / 2;
 }
 

+static void rt288x_gpio_reserve(int first, int last)
+{
+       for (; first <= last; first++)
+               gpio_request(first, "reserved");
+}
+
+void __init rt288x_gpio_init(u32 mode)
+{
+       rt288x_sysc_wr(mode, SYSC_REG_GPIO_MODE);
+
+       ramips_gpio_init();
+       if ((mode & RT2880_GPIO_MODE_I2C) == 0)
+               rt288x_gpio_reserve(1, 2);
+
+       if ((mode & RT2880_GPIO_MODE_SPI) == 0)
+               rt288x_gpio_reserve(3, 6);
+
+       if ((mode & RT2880_GPIO_MODE_UART0) == 0)
+               rt288x_gpio_reserve(7, 14);
+
+       if ((mode & RT2880_GPIO_MODE_JTAG) == 0)
+               rt288x_gpio_reserve(17, 21);
+
+       if ((mode & RT2880_GPIO_MODE_MDIO) == 0)
+               rt288x_gpio_reserve(22, 23);
+
+       if ((mode & RT2880_GPIO_MODE_SDRAM) == 0)
+               rt288x_gpio_reserve(24, 39);
+
+       if ((mode & RT2880_GPIO_MODE_PCI) == 0)
+               rt288x_gpio_reserve(40, 71);
+}

diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-v22rw-2x2.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-v22rw-2x2.c
index 11867632790a12cc84d777f86802d539fb5e0f89..8bd2c956fd6a381c8edada257274b36b3b47fdc5 100644 (file)
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-v22rw-2x2.c
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-v22rw-2x2.c
@@ -18,9 +18,13 @@
 #include <asm/mips_machine.h>
 #include <asm/mach-ralink/machine.h>
 #include <asm/mach-ralink/dev_gpio_leds.h>
 #include <asm/mips_machine.h>
 #include <asm/mach-ralink/machine.h>
 #include <asm/mach-ralink/dev_gpio_leds.h>

+#include <asm/mach-ralink/rt305x.h>
+#include <asm/mach-ralink/rt305x_regs.h>

 
 #include "devices.h"
 
 
 #include "devices.h"
 

+#define V22RW_2X2_GPIO_BUTTON_WPS      0
+#define V22RW_2X2_GPIO_BUTTON_SWRST    10

 #define V22RW_2X2_GPIO_LED_SECURITY    13
 #define V22RW_2X2_GPIO_LED_WPS         14
 
 #define V22RW_2X2_GPIO_LED_SECURITY    13
 #define V22RW_2X2_GPIO_LED_WPS         14
 


@@ -78,6 +82,8 @@ static struct gpio_led v22rw_2x2_leds_gpio[] __initdata = {
 
 static void __init v22rw_2x2_init(void)
 {
 
 static void __init v22rw_2x2_init(void)
 {

+       rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
+

        rt305x_register_flash(0, &v22rw_2x2_flash_data);
 
        ramips_register_gpio_leds(-1, ARRAY_SIZE(v22rw_2x2_leds_gpio),
        rt305x_register_flash(0, &v22rw_2x2_flash_data);
 
        ramips_register_gpio_leds(-1, ARRAY_SIZE(v22rw_2x2_leds_gpio),

diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-whr-g300n.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-whr-g300n.c
index 97fe85737428adc75205a46eb8b3ae8c66b4a956..2c2f44469ba68eca0152cefffd8ecf6f04390ac1 100644 (file)
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-whr-g300n.c
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/mach-whr-g300n.c
@@ -18,6 +18,8 @@
 #include <asm/mips_machine.h>
 #include <asm/mach-ralink/machine.h>
 #include <asm/mach-ralink/dev_gpio_leds.h>
 #include <asm/mips_machine.h>
 #include <asm/mach-ralink/machine.h>
 #include <asm/mach-ralink/dev_gpio_leds.h>

+#include <asm/mach-ralink/rt305x.h>
+#include <asm/mach-ralink/rt305x_regs.h>

 
 #include "devices.h"
 
 
 #include "devices.h"
 


@@ -87,6 +89,8 @@ static struct gpio_led whr_g300n_leds_gpio[] __initdata = {
 
 static void __init whr_g300n_init(void)
 {
 
 static void __init whr_g300n_init(void)
 {

+       rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
+

        rt305x_register_flash(0, &whr_g300n_flash_data);
 
        ramips_register_gpio_leds(-1, ARRAY_SIZE(whr_g300n_leds_gpio),
        rt305x_register_flash(0, &whr_g300n_flash_data);
 
        ramips_register_gpio_leds(-1, ARRAY_SIZE(whr_g300n_leds_gpio),

diff --git a/target/linux/ramips/files/arch/mips/ralink/rt305x/rt305x.c b/target/linux/ramips/files/arch/mips/ralink/rt305x/rt305x.c
index 249da36b064b0533983bd7b7492bcef6f16781ce..002aaebabd692fcde42dfaf2054b82e80e62067d 100644 (file)
--- a/target/linux/ramips/files/arch/mips/ralink/rt305x/rt305x.c
+++ b/target/linux/ramips/files/arch/mips/ralink/rt305x/rt305x.c
@@ -14,6 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/module.h>

+#include <linux/gpio.h>

 
 #include <asm/mach-ralink/common.h>
 #include <asm/mach-ralink/rt305x.h>
 
 #include <asm/mach-ralink/common.h>
 #include <asm/mach-ralink/rt305x.h>


@@ -66,3 +67,60 @@ void __init rt305x_detect_sys_freq(void)
 
        rt305x_sys_freq = rt305x_cpu_freq / 3;
 }
 
        rt305x_sys_freq = rt305x_cpu_freq / 3;
 }

+
+static void rt305x_gpio_reserve(int first, int last)
+{
+       for (; first <= last; first++)
+               gpio_request(first, "reserved");
+}
+
+void __init rt305x_gpio_init(u32 mode)
+{
+       u32 t;
+
+       rt305x_sysc_wr(mode, SYSC_REG_GPIO_MODE);
+
+       ramips_gpio_init();
+       if ((mode & RT305X_GPIO_MODE_I2C) == 0)
+               rt305x_gpio_reserve(RT305X_GPIO_I2C_SD, RT305X_GPIO_I2C_SCLK);
+
+       if ((mode & RT305X_GPIO_MODE_SPI) == 0)
+               rt305x_gpio_reserve(RT305X_GPIO_SPI_EN, RT305X_GPIO_SPI_CLK);
+
+       t = mode >> RT305X_GPIO_MODE_UART0_SHIFT;
+       t &= RT305X_GPIO_MODE_UART0_MASK;
+       switch (t) {
+       case RT305X_GPIO_MODE_UARTF:
+       case RT305X_GPIO_MODE_PCM_UARTF:
+       case RT305X_GPIO_MODE_PCM_I2S:
+       case RT305X_GPIO_MODE_I2S_UARTF:
+               rt305x_gpio_reserve(RT305X_GPIO_7, RT305X_GPIO_14);
+               break;
+       case RT305X_GPIO_MODE_PCM_GPIO:
+               rt305x_gpio_reserve(RT305X_GPIO_10, RT305X_GPIO_14);
+               break;
+       case RT305X_GPIO_MODE_GPIO_UARTF:
+       case RT305X_GPIO_MODE_GPIO_I2S:
+               rt305x_gpio_reserve(RT305X_GPIO_7, RT305X_GPIO_10);
+               break;
+       }
+
+       if ((mode & RT305X_GPIO_MODE_UART1) == 0)
+               rt305x_gpio_reserve(RT305X_GPIO_UART1_TXD,
+                                   RT305X_GPIO_UART1_RXD);
+
+       if ((mode & RT305X_GPIO_MODE_JTAG) == 0)
+               rt305x_gpio_reserve(RT305X_GPIO_JTAG_TDO, RT305X_GPIO_JTAG_TDI);
+
+       if ((mode & RT305X_GPIO_MODE_MDIO) == 0)
+               rt305x_gpio_reserve(RT305X_GPIO_MDIO_MDC,
+                                   RT305X_GPIO_MDIO_MDIO);
+
+       if ((mode & RT305X_GPIO_MODE_SDRAM) == 0)
+               rt305x_gpio_reserve(RT305X_GPIO_SDRAM_MD16,
+                                   RT305X_GPIO_SDRAM_MD31);
+
+       if ((mode & RT305X_GPIO_MODE_RGMII) == 0)
+               rt305x_gpio_reserve(RT305X_GPIO_GE0_TXD0,
+                                   RT305X_GPIO_GE0_RXCLK);
+}