# Network configuration file
-# Uncomment the following statements to change the network configuration
-## LAN configuration
-lan_ifname="eth0"
-lan_proto="static"
-lan_ipaddr="192.168.1.1"
-lan_netmask="255.255.255.0"
-# lan_gateway=""
-# lan_dns=""
-
-## WAN configuration
-# wan_proto=pppoe
-wan_ifname=ppp0
-wan_device=nas0
-atm_vpi=8
-atm_vci=35
-# ppp_username=my_username
-# ppp_passwd=my_passwd
-
-## WAN configuration (pppoe)
-pppoe_atm=1
-ppp_mtu=1492
-
-## WAN configuration (pppoa)
-# ppp_mtu=1500
+config interface lan
+ option ifname eth0
+ option proto static
+ option ipaddr 192.168.1.1
+ option netmask 255.255.255.0
# Network configuration file
-# Copyright (C) 2006 OpenWrt.org
-
-## LAN configuration
-lan_ifname="eth0"
-lan_proto="dhcp"
+config interface lan
+ option ifname eth0
+ option proto dhcp
-# Network configuration file
# Copyright (C) 2006 OpenWrt.org
-## LAN configuration
-lan_ifname="br0"
-lan_ifnames="eth0 ath0"
-lan_proto="static"
-lan_ipaddr="192.168.1.1"
-lan_netmask="255.255.255.0"
-
-## WAN configuration
-wan_ifname=""
-wan_proto="none"
+config interface lan
+ option type bridge
+ option ifnames "eth0 ath0"
+ option proto static
+ option ipaddr 192.168.1.1
+ option netmask 255.255.255.0
+++ /dev/null
-#!/bin/sh
-# Copyright (C) 2006 OpenWrt.org
-
-setup_wl()
-{
- [ -f /proc/net/wl0 ] && {
- lsmod | grep wlcompat >&- || insmod wlcompat
- }
- iwconfig "$INTERFACE" 2>&- | grep -v 'no wireless' >&- && {
- /sbin/wifi
- }
-}
-setup_eth()
-{
- [ -d /proc/switch ] || {
- insmod switch-core
- insmod switch-robo || insmod switch-adm
- }
- if="$(echo "$INTERFACE" | sed s,eth,et,)"
- ifconfig "$INTERFACE" up 2>&- >&-
- [ -d "/proc/switch/$INTERFACE" ] || return 0
- echo "1" > "/proc/switch/$INTERFACE/reset"
- echo "1" > "/proc/switch/$INTERFACE/enable_vlan"
- for vlan in $(seq 0 15); do
- eval "hwname=\"\${vlan${vlan}hwname}\""
- [ "$hwname" = "$if" ] && {
- eval "vports=\"\${vlan${vlan}ports}\""
- [ -n "$vports" ] && echo "$vports" > "/proc/switch/$INTERFACE/vlan/$vlan/ports"
- $DEBUG vconfig add "$INTERFACE" "$vlan"
- }
- done
-}
-
-do_register()
-{
- case "${INTERFACE%%[0-9]*}" in
- eth) setup_eth;;
- wl) setup_wl;;
- esac
-}
-
-
-case "$ACTION" in
- add|register) do_register;;
-esac
strings /dev/mtdblock/3
fi
) | awk '
-function p(name) {
- if (c[name] != "") print name "=\"" c[name] "\""
+function p(cfgname, name) {
+ if (c[name] != "") print " option " cfgname " \"" c[name] "\""
}
BEGIN {
FS="="
c["lan_ifname"]="br0"
- c["lan_ifnames"]="vlan0 eth1"
+ c["lan_ifnames"]="eth0.0 wl0"
c["wan_proto"]="none"
- c["wan_ifname"]="vlan1"
+ c["wan_ifname"]="eth0.1"
c["vlan0ports"]="1 2 3 4 5*"
c["vlan1ports"]="0 5"
}
END {
# v1 hardware
if (nvram["boardtype"] == "bcm94710dev") {
- # Linksys WRT54G v1.x
- if (nvram["boardnum"] == "42") {
- c["vlan0ports"]=""
- c["vlan1ports"]=""
- c["lan_ifnames"]="vlan2 eth2"
- }
-
# Asus WL-500g
if (nvram["boardnum"] == "asusX") {
- c["lan_ifnames"]="eth0 eth1 eth2" # FIXME
- # wan_ifname=eth1
+ c["lan_ifnames"]="eth0 eth1 wl0" # FIXME
+ c["wan_ifname"]=""
}
}
if (nvram["boardtype"] == "wgt634u") {
c["vlan0ports"] = "0 1 2 3 5*"
c["vlan1ports"] = "4 5"
- c["lan_ifnames"] = "vlan0 ath0"
+ c["lan_ifnames"] = "eth0.0 ath0"
}
if ((nvram["boardtype"] == "0x0467") || (nvram["boardtype"] == "0x042f")) {
c["vlan0ports"] = "0 1 2 3 5*"
# WAP54G
if ((nvram["boardnum"] == "2") || \
(nvram["boardnum"] == "1024")) {
- c["lan_ifnames"]="eth0 eth1"
+ c["lan_ifnames"]="eth0 wl0"
c["wan_ifname"]=""
}
print "#### VLAN configuration "
- print "vlan0hwname=et0"
- print "vlan1hwname=et0"
- p("vlan0ports")
- p("vlan1ports")
+ print "config switch eth0"
+ p("vlan0", "vlan0ports")
+ p("vlan1", "vlan1ports")
print ""
print ""
-
print "#### LAN configuration"
- print "lan_proto=\"static\""
- p("lan_ifname")
- p("lan_ifnames")
- print "lan_ipaddr=\"192.168.1.1\""
- print "lan_netmask=\"255.255.255.0\""
- print "# lan_dns=\"192.168.1.1\""
- print "# lan_gateway=\"192.168.1.1\""
-
+ print "config interface lan"
+ print " option type bridge"
+ p("ifnames", "lan_ifnames")
+ print " option proto static"
+ print " option ipaddr 192.168.1.1"
+ print " option netmask 255.255.255.0"
print ""
print ""
-
print "#### WAN configuration"
- print "# wan_proto: WAN protocol, available protocols:"
- print "# none: disable"
- print "# dhcp: DHCP"
- print "# static: Static IP"
- print "# pppoe: PPP over Ethernet"
- print "# pptp: Point-to-Point tunneling Protocol"
- print "# for pppoe and pptp you need to use wan_ifname=\"ppp0\""
- print ""
- print "wan_proto=dhcp"
- p("wan_ifname")
- print "wan_device=\"" c["wan_ifname"] "\""
- print "# wan_ipaddr=\"192.168.0.2\""
- print "# wan_netmask=\"255.255.255.0\""
- print "# wan_gateway=\"192.168.0.1\""
- print "# wan_dns=\"192.168.0.1\""
- print ""
- print "## PPP over Ethernet and PPTP"
- print "# wan_ifname=\"ppp0\""
- print "# ppp_username=\"my_username\""
- print "# ppp_passwd=\"my_password\""
- print "# pptp_server_ip=\"192.168.0.1\""
+ print "config interface wan"
+ p("ifname", "wan_ifname")
+ print " option proto dhcp"
}
' > /etc/config/network
+++ /dev/null
-#!/bin/sh
-# Copyright (C) 2006 OpenWrt.org
-
-setup_eth()
-{
- [ -d /proc/switch ] || {
- insmod switch-core
- insmod switch-robo || insmod switch-adm
- }
- if="$(echo "$INTERFACE" | sed s,eth,et,)"
- ifconfig "$INTERFACE" up 2>&- >&-
- [ -d "/proc/switch/$INTERFACE" ] || return 0
- echo "1" > "/proc/switch/$INTERFACE/reset"
- echo "1" > "/proc/switch/$INTERFACE/enable_vlan"
- for vlan in $(seq 0 15); do
- eval "hwname=\"\${vlan${vlan}hwname}\""
- [ "$hwname" = "$if" ] && {
- eval "vports=\"\${vlan${vlan}ports}\""
- [ -n "$vports" ] && echo "$vports" > "/proc/switch/$INTERFACE/vlan/$vlan/ports"
- $DEBUG vconfig add "$INTERFACE" "$vlan"
- }
- done
-}
-
-do_register()
-{
- case "${INTERFACE%%[0-9]*}" in
- eth) setup_eth;;
- esac
-}
-
-
-case "$ACTION" in
- add|register) do_register;;
-esac
strings /dev/mtdblock/3
fi
) | awk '
-function p(name) {
- if (c[name] != "") print name "=\"" c[name] "\""
+function p(cfgname, name) {
+ if (c[name] != "") print " option " cfgname " \"" c[name] "\""
}
BEGIN {
FS="="
c["lan_ifname"]="br0"
- c["lan_ifnames"]="vlan0 eth1"
+ c["lan_ifnames"]="eth0.0 wl0"
c["wan_proto"]="none"
- c["wan_ifname"]="vlan1"
+ c["wan_ifname"]="eth0.1"
c["vlan0ports"]="1 2 3 4 5*"
c["vlan1ports"]="0 5"
}
END {
# v1 hardware
if (nvram["boardtype"] == "bcm94710dev") {
- # Linksys WRT54G v1.x
- if (nvram["boardnum"] == "42") {
- c["vlan0ports"]=""
- c["vlan1ports"]=""
- c["lan_ifnames"]="vlan2 eth2"
- }
-
# Asus WL-500g
if (nvram["boardnum"] == "asusX") {
- c["lan_ifnames"]="eth0 eth1 eth2" # FIXME
- # wan_ifname=eth1
+ c["lan_ifnames"]="eth0 eth1 wl0" # FIXME
+ c["wan_ifname"]=""
}
}
if (nvram["boardtype"] == "wgt634u") {
c["vlan0ports"] = "0 1 2 3 5*"
c["vlan1ports"] = "4 5"
- c["lan_ifnames"] = "vlan0 ath0"
+ c["lan_ifnames"] = "eth0.0 ath0"
}
if ((nvram["boardtype"] == "0x0467") || (nvram["boardtype"] == "0x042f")) {
c["vlan0ports"] = "0 1 2 3 5*"
# WAP54G
if ((nvram["boardnum"] == "2") || \
(nvram["boardnum"] == "1024")) {
- c["lan_ifnames"]="eth0 eth1"
+ c["lan_ifnames"]="eth0 wl0"
c["wan_ifname"]=""
}
print "#### VLAN configuration "
- print "vlan0hwname=et0"
- print "vlan1hwname=et0"
- p("vlan0ports")
- p("vlan1ports")
+ print "config switch eth0"
+ p("vlan0", "vlan0ports")
+ p("vlan1", "vlan1ports")
print ""
print ""
-
print "#### LAN configuration"
- print "lan_proto=\"static\""
- p("lan_ifname")
- p("lan_ifnames")
- print "lan_ipaddr=\"192.168.1.1\""
- print "lan_netmask=\"255.255.255.0\""
- print "# lan_dns=\"192.168.1.1\""
- print "# lan_gateway=\"192.168.1.1\""
-
+ print "config interface lan"
+ print " option type bridge"
+ p("ifnames", "lan_ifnames")
+ print " option proto static"
+ print " option ipaddr 192.168.1.1"
+ print " option netmask 255.255.255.0"
print ""
print ""
-
print "#### WAN configuration"
- print "# wan_proto: WAN protocol, available protocols:"
- print "# none: disable"
- print "# dhcp: DHCP"
- print "# static: Static IP"
- print "# pppoe: PPP over Ethernet"
- print "# pptp: Point-to-Point tunneling Protocol"
- print "# for pppoe and pptp you need to use wan_ifname=\"ppp0\""
- print ""
- print "wan_proto=dhcp"
- p("wan_ifname")
- print "wan_device=\"" c["wan_ifname"] "\""
- print "# wan_ipaddr=\"192.168.0.2\""
- print "# wan_netmask=\"255.255.255.0\""
- print "# wan_gateway=\"192.168.0.1\""
- print "# wan_dns=\"192.168.0.1\""
- print ""
- print "## PPP over Ethernet and PPTP"
- print "# wan_ifname=\"ppp0\""
- print "# ppp_username=\"my_username\""
- print "# ppp_passwd=\"my_password\""
- print "# pptp_server_ip=\"192.168.0.1\""
+ print "config interface wan"
+ p("ifname", "wan_ifname")
+ print " option proto dhcp"
}
' > /etc/config/network
-#!/bin/sh
# Copyright (C) 2006 OpenWrt.org
-find_name()
-{
- for ifname in lan wan wifi ${ifnames}; do
- IFTYPE="${ifname}"
- eval "IFPROTO=\"\${${IFTYPE}_proto}\""
- eval "IFACE=\"\${${IFTYPE}_ifname}\""
- case "$IFPROTO" in
- ""|none);;
- static|dhcp)
- [ "${IFACE}" = "$INTERFACE" ] && return 0
- [ "${IFACE%%[0-9]*}" = "br" ] && {
- eval "ifs=\"\${${IFTYPE}_ifnames}\""
- for part in $ifs; do
- [ "$part" = "$INTERFACE" ] && return 0
- done
- }
- ;;
- pppoa)
- [ "$INTERFACE" = "atm0" \
- -a -x /sbin/ifup.${IFPROTO} ] && return 0
- ;;
- *)
- eval "device=\"\${${IFTYPE}_device}\""
- [ "$device" = "$INTERFACE" \
- -a -x /sbin/ifup.${IFPROTO} ] && return 0
- ;;
- esac
- done
- IFACE=""
- IFTYPE=""
- IFPROTO=""
- return 255
-}
-
-do_ifup() {
- if="$3"
- eval "if_proto=\"\${${2}_proto}\""
-
- pidfile=/var/run/${if}.pid
- [ -f $pidfile ] && $DEBUG kill $(cat $pidfile)
-
- case "$1" in
- static)
- eval "ip=\"\${${2}_ipaddr}\""
- eval "ip6=\"\${${2}_ip6addr}\""
- eval "netmask=\"\${${2}_netmask}\""
- eval "gateway=\"\${${2}_gateway}\""
- eval "dns=\"\${${2}_dns}\""
- eval "static_route=\"\${${2}_static_route}\""
-
- $DEBUG ifconfig $if $ip ${netmask:+netmask $netmask} broadcast + up
- [ -n "$ip6" ] && $DEBUG ifconfig $if add $ip6
-
- [ -n "$static_route" ] && {
- for route in $static_route; do
- if [ "$(echo $route | cut -d \/ -f2)" != "32" ];
- then
- route add -net $(echo $route | cut -d \/ -f1) netmask $(echo $route | cut -d \/ -f1) dev $if
- else
- route add -host $(echo $route | cut -d \/ -f1) dev $if
- fi
- done
- }
+include network
- ${gateway:+$DEBUG route add default gw $gateway}
+addif() {
+ scan_interfaces
+ setup_interface "$INTERFACE"
- [ -f /tmp/resolv.conf ] || {
- debug "# --- creating /tmp/resolv.conf ---"
- for ns in $dns; do
- echo "nameserver $ns" >> /tmp/resolv.conf
- done
- }
-
- env -i ACTION="ifup" INTERFACE="${2}" PROTO=static /sbin/hotplug "iface" &
- ;;
- dhcp)
- eval "ip=\"\${${2}_ipaddr}\""
- eval "netmask=\"\${${2}_netmask}\""
- eval "hostname=\"\${${2}_hostname}\""
-
- $DEBUG ifconfig $if $ip ${netmask:+netmask $netmask} broadcast + up
-
- args="-i $if ${ip:+-r $ip} -b -p $pidfile"
- hostname="${hostname%%.*}"
- args="$args${hostname:+ -H $hostname}"
- [ "$if_proto" = "pptp" ] && args="$args -n -q" || args="$args -R &"
- ${DEBUG:-eval} "udhcpc $args"
- # hotplug events are handled by /usr/share/udhcpc/default.script
- ;;
- *)
- if [ -x "/sbin/ifup.$1" ]; then
- ( $DEBUG . /sbin/ifup.$1 ${2} $3 )
- fi
- ;;
- esac
-}
-
-do_register()
-{
- [ -z "$IFTYPE" -o -z "$IFPROTO" ] && {
- find_name || {
- case "${INTERFACE%%[0-9]*}" in
- wds)
- for ifname in lan wifi; do
- eval "if=\"\${${ifname}_ifname}\""
- [ -z "$IFPROTO" ] && [ "$if" = "br0" ] && {
- eval "IFPROTO=\"\${${2}_proto}\""
- IFTYPE="${tmp}"
- }
- done
- [ -z "$IFPROTO" ] && return 0
- ;;
- atm)
- for tmp in lan wan wifi ${ifnames}; do
- eval "if_proto=\"\${${2}_proto}\""
- [ "$if_proto" = "pppoa" ] && {
- do_ifup "pppoa" "$tmp" "$INTERFACE"
- return 0
- }
- done
- ;;
- *)
- return 0
- ;;
- esac
- }
- }
-
- case "${INTERFACE%%[0-9]*}" in
- ppp|atm);;
- *)
- eval "mac=\"\${${IFTYPE}_hwaddr}\""
- ${mac:+$DEBUG ifconfig $INTERFACE down hw ether $mac}
- ;;
- esac
-
- eval "if=\"\${${IFTYPE}_ifname}\""
- if [ "${if%%[0-9]}" = "br" ]; then
- if_valid "$INTERFACE" && {
- ifconfig "$if" 2>&- >&- || {
- eval "stp=\"\${${IFTYPE}_stp}\""
- $DEBUG brctl addbr "$if"
- $DEBUG brctl setfd "$if" 0
- $DEBUG brctl stp "$if" "${stp:-0}"
+ # find all vlan configurations for this interface and set them up as well
+ for ifc in $interfaces; do
+ config_get type "$ifc" type
+ case "$type" in
+ bridge) config_get ifs "$ifc" ifnames;;
+ *) config_get ifs "$ifc" ifname;;
+ esac
+ for dev in $ifs; do
+ [ "${dev%%\.*}" = "$INTERFACE" -a "$dev" != "$INTERFACE" ] && {
+ add_vlan "$dev"
}
-
- if [ "$INTERFACE" != "$if" ]; then
- $DEBUG ifconfig "$INTERFACE" 0.0.0.0 up
- $DEBUG brctl addif "$if" "$INTERFACE"
- $DEBUG ifconfig "$INTERFACE" allmulti
- else
- do_ifup "$IFPROTO" "$IFTYPE" "$if"
- fi
- }
- else
- [ "${INTERFACE%%[0-9]*}" = "ppp" ] || do_ifup "$IFPROTO" "$IFTYPE" "$if"
- fi
-}
-
-do_unregister() {
- [ -z "$IFTYPE" -o -z "$IFPROTO" ] && {
- find_name || return 0
- }
-
- [ "${IFACE%%[0-9]*}" = "br" ] && {
- if [ "$INTERFACE" != "$IFACE" ]; then
- brctl delif "$IFACE" "$INTERFACE" 2>&- >&-
- else
- brctl delbr "$IFACE" 2>&- >&-
- fi
- }
-
- case "$IFPROTO" in
- pppoe|pppoa|pptp)
- killall pppd 2>&- >&-
- ;;
- dhcp)
- [ -f /var/run/${INTERFACE}.pid ] && kill "$(cat /var/run/${INTERFACE}.pid)" 2>&- >&-
- ;;
- esac
-
- [ "${INTERFACE%%[0-9]*}" = "atm" ] || ifconfig "$INTERFACE" 0.0.0.0 down 2>&-
+ done
+ done
}
case "$ACTION" in
- add|register) do_register;;
- remove|unregister) do_unregister;;
+ add|register)
+ addif
+ ;;
esac
[ -f /proc/mounts ] || /sbin/mount_root
[ -f /proc/jffs2_bbc ] && echo "S" > /proc/jffs2_bbc
-vconfig set_name_type VLAN_PLUS_VID_NO_PAD
+vconfig set_name_type DEV_PLUS_VID_NO_PAD
HOSTNAME=${wan_hostname%%.*}
echo ${HOSTNAME:=OpenWrt}>/proc/sys/kernel/hostname
mkdir -p /var/run
mkdir -p /var/log
+mkdir -p /var/lock
touch /var/log/wtmp
touch /var/log/lastlog
[ "$FAILSAFE" = "true" ] && touch /tmp/.failsafe
--- /dev/null
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.orga
+
+setup_switch() { return 0; }
+
+. /etc/functions.sh
+include network
+setup_switch
+/sbin/wifi
${FAILSAFE:+exit}
-[ -f /etc/config/network ] && . /etc/config/network
-eval $(ipcalc "$log_ipaddr")
-[ "$log_ipaddr" = "$IP" ] || log_ipaddr=""
-syslogd -C 16 ${log_ipaddr:+-L -R $log_ipaddr}
+# FIXME: add logging configuration
+#[ -f /etc/config/network ] && . /etc/config/network
+#eval $(ipcalc "$log_ipaddr")
+#[ "$log_ipaddr" = "$IP" ] || log_ipaddr=""
+syslogd -C 16 #${log_ipaddr:+-L -R $log_ipaddr}
klogd
-#${FAILSAFE:+telnetd -l /bin/login; ifup lan; exit}
+
for i in /etc/init.d/S*; do
$i start 2>&1
done | logger -s -p 6 -t '' &
--- /dev/null
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+
+# DEBUG="echo"
+
+find_config() {
+ local type iface ifn
+ for ifn in $interfaces; do
+ config_get type "$ifn" type
+ config_get iface "$ifn" ifname
+ case "$type" in
+ bridge)
+ config_get iface "$ifn" ifnames
+ ;;
+ esac
+ for ifc in $iface; do
+ [ "$ifc" = "$1" ] && {
+ echo "$ifn"
+ return 0
+ }
+ done
+ done
+
+ return 1;
+}
+
+scan_interfaces() {
+ local mode type iface
+ interfaces=
+ config_cb() {
+ config_get type "$CONFIG_SECTION" TYPE
+ case "$type" in
+ interface)
+ config_get type "$CONFIG_SECTION" type
+ config_get mode "$CONFIG_SECTION" proto
+ case "$type" in
+ bridge)
+ config_get iface "$CONFIG_SECTION" ifname
+ iface="${iface:-br-$CONFIG_SECTION}"
+ config_set "$CONFIG_SECTION" ifname "$iface"
+ ;;
+ esac
+ append interfaces "$CONFIG_SECTION"
+ ( type "scan_$mode" ) >/dev/null 2>/dev/null && eval "scan_$mode '$CONFIG_SECTION'"
+ ;;
+ esac
+ }
+ config_load network
+}
+
+add_vlan() {
+ local vif="${1%\.*}"
+
+ [ "$1" = "$vif" ] || ifconfig "$1" >/dev/null 2>/dev/null || {
+ ifconfig "$vif" up 2>/dev/null >/dev/null || add_vlan "$vif"
+ $DEBUG vconfig add "$vif" "${1##*\.}"
+ }
+}
+
+setup_interface() {
+ local iface="$1"
+ local config="$2"
+ local proto="$3"
+
+ [ -n "$config" ] || {
+ config=$(find_config "$iface")
+ [ "$?" = 0 ] || return 1
+ }
+
+ [ -n "$proto" ] || {
+ config_get proto "$config" proto
+ }
+
+ config_get iftype "$config" type
+
+ # Setup VLAN interfaces
+ add_vlan "$iface"
+
+ # Setup bridging
+ case "$iftype" in
+ bridge)
+ config_get bridge_ifname "$config" ifname
+ ifconfig "$iface" up 2>/dev/null >/dev/null
+ ifconfig "$bridge_ifname" 2>/dev/null >/dev/null && {
+ $DEBUG brctl addif "$bridge_ifname" "$iface"
+ return 0
+ } || {
+ $DEBUG brctl addbr "$bridge_ifname"
+ $DEBUG brctl setfd "$bridge_ifname" 0
+ $DEBUG brctl addif "$bridge_ifname" "$iface"
+ iface="$bridge_ifname"
+ }
+ ;;
+ esac
+
+ # Interface settings
+ config_get mtu "$config" mtu
+ $DEBUG ifconfig "$iface" ${mtu:+mtu $mtu} up
+
+ pidfile="/var/run/$iface.pid"
+ case "$proto" in
+ static)
+ config_get ipaddr "$config" ipaddr
+ config_get netmask "$config" netmask
+ [ -z "$ipaddr" -o -z "$netmask" ] && return 1
+
+ config_get ip6addr "$config" ip6addr
+ config_get gateway "$config" gateway
+ config_get dns "$config" dns
+
+ $DEBUG ifconfig "$iface" "$ipaddr" netmask "$netmask"
+ [ -z "$gateway" ] || route add default gw "$gateway"
+ [ -z "$dns" -o -f /tmp/resolv.conf ] || {
+ for ns in $dns; do
+ echo "nameserver $ns" >> /tmp/resolv.conf
+ done
+ }
+
+ env -i ACTION="ifup" INTERFACE="config" DEVICE="$iface" PROTO=static /sbin/hotplug "iface" &
+ ;;
+ dhcp)
+ pid="$(cat "$pidfile" 2>/dev/null)"
+ [ -n "$pid" -a -d "/proc/$pid" ] && kill -9 "$pid"
+
+ config_get ipaddr "$config" ipaddr
+ config_get netmask "$config" netmask
+ config_get hostname "$config" hostname
+ config_get proto1 "$config" proto
+
+ [ -z "$ipaddr" ] || \
+ $DEBUG ifconfig "$iface" "$ipaddr" ${netmask:+netmask "$netmask"}
+
+ # don't stay running in background if dhcp is not the main proto on the interface (e.g. when using pptp)
+ [ "$proto1" != "$proto" ] && dhcpopts="-n -q"
+ $DEBUG udhcpc -i "$iface" ${ipaddr:+-r $ipaddr} ${hostname:+-H $hostname} -b -p "$pidfile" ${dhcpopts:- -R &}
+ ;;
+ *)
+ if ( eval "type setup_interface_$proto" ) >/dev/null 2>/dev/null; then
+ eval "setup_interface_$proto '$iface' '$config' '$proto'"
+ else
+ echo "Interface type $proto not supported."
+ return 1
+ fi
+ ;;
+ esac
+}
+
}
. /etc/functions.sh
-. /etc/config/network
PATH=/bin:/sbin:/usr/bin:/usr/sbin
LOGNAME=root
[ $# = 0 ] && { echo " $0 <group>"; exit; }
. /etc/functions.sh
-. /etc/config/network
+include network
+scan_interfaces
debug "### ifdown $type ###"
type=$1
-eval "if_proto=\"\${${type}_proto}\""
-eval "if=\"\${${type}_ifname}\""
-[ "${if%%[0-9]}" = "ppp" ] && eval "if=\"\${${type}_device}\""
+config_get proto "$type" proto
+[ -z "$proto" ] && { echo "interface not found."; exit; }
-case "$if_proto" in
- pppoa) hotplug_dev unregister atm0; exit 0 ;;
- ""|none) exit 0;;
-esac
+# kill active ppp daemon
+pid="$(cat /var/run/ppp-${type}.pid 2>/dev/null)"
+[ -n "$pid" -a -d "/proc/$pid" ] && {
+ kill $pid
+ sleep 1
+ [ -d "/proc/$pid" ] && kill -9 $pid
+}
-hotplug_dev unregister "$if"
+# kill any other process associated with the interface
+config_get ifname "$type" ifname
+pid="$(cat /var/run/${ifname}.pid 2>/dev/null)"
+[ -n "$pid" -a -d "/proc/$pid" ] && kill -9 $pid
+
+config_get ifname "$type" ifname
+ifconfig "$ifname" >/dev/null 2>/dev/null && {
+ ifconfig "$ifname" 0.0.0.0 down
+
+ config_get iftype "$type" type
+ [ "$iftype" = "bridge" ] && brctl delbr "$ifname"
+}
#!/bin/sh
# Copyright (C) 2006 OpenWrt.org
-[ $# = 0 ] && { echo " $0 <group>"; exit; }
-. /etc/functions.sh
-. /etc/config/network
+. /sbin/ifdown "$@"
-ifdown $1
-
-debug "### ifup $type ###"
-type=$1
-
-eval "if_proto=\"\${${type}_proto}\""
-eval "if=\"\${${type}_ifname}\""
-[ "${if%%[0-9]}" = "ppp" ] && eval "if=\"\${${type}_device}\""
-
-case "$if_proto" in
- pppoa) hotplug_dev register atm0; exit 0 ;;
- pppoe)
- # PPPoE over ATM
- [ "$if" = "nas0" ] && {
- ifconfig nas0 2>&- >&- || {
- hotplug_dev register atm0
- exit 0
- }
- }
+config_get iftype "$1" type
+case "$iftype" in
+ bridge)
+ config_get ifname "$1" ifnames
+ ;;
+ *)
+ config_get ifname "$1" ifname
;;
- none|"") exit 0;;
esac
-if [ "${if%%[0-9]}" = "br" ]; then
- eval "ifnames=\"\${${type}_ifnames}\""
- for sif in $ifnames; do
- hotplug_dev register "$sif"
- done
-else
- hotplug_dev register "$if"
-fi
+for dev in $ifname; do
+ setup_interface "$dev" "$1"
+done
}
config_load wireless
-
-[ -d /lib/wifi -a -n "$(ls /lib/wifi/*.sh 2>&-)" ] && {
- for script in /lib/wifi/*.sh; do
- . $script
- done
-}
+include wifi
for device in $DEVICES; do (
config_get type "$device" type
#!/bin/sh
[ -z "$1" ] && echo "Error: should be run by udhcpc" && exit 1
-. /etc/config/network
+. /etc/functions.sh
+include network
RESOLV_CONF="/tmp/resolv.conf"
hotplug_event() {
- for ifname in lan wan wifi ${ifnames}; do
- eval "proto=\"\${${ifname}_proto}\""
- eval "if=\"\${${ifname}_ifname}\""
+ scan_interfaces
+ for ifc in $interfaces; do
+ config_get ifname $ifc ifname
+ [ "$ifname" = "$interface" ] || continue
+
+ config_get proto $ifc proto
[ "$proto" = "dhcp" ] || continue
- [ "$if" = "$interface" ] || continue
+
env -i ACTION="$1" INTERFACE="$ifname" PROTO=dhcp /sbin/hotplug iface
done
}
-# Network configuration file
# Copyright (C) 2006 OpenWrt.org
-## LAN configuration
-lan_ifname="eth0"
-lan_proto="dhcp"
+config interface lan
+ option ifname eth0
+ option proto dhcp
+
-# Network configuration file
# Copyright (C) 2006 OpenWrt.org
-## LAN configuration
-lan_ifname="br0"
-lan_ifnames="eth0 ath0"
-lan_proto="static"
-lan_ipaddr="192.168.1.1"
-lan_netmask="255.255.255.0"
-
-## WAN configuration
-wan_ifname=""
-wan_proto="none"
+config interface lan
+ option type bridge
+ option ifnames "eth0 ath0"
+ option proto static
+ option ipaddr 192.168.1.1
+ option netmask 255.255.255.0
-# Network configuration file
# Copyright (C) 2006 OpenWrt.org
-## LAN configuration
-lan_ifname="br0"
-lan_ifnames="eth1 eth2"
-lan_proto="static"
-lan_ipaddr="192.168.1.1"
-lan_netmask="255.255.255.0"
+config interface lan
+ option type bridge
+ option ifnames "eth1 eth2"
+ option proto static
+ option ipaddr 192.168.1.1
+ option netmask 255.255.255.0
+
+config interface wan
+ option ifname eth0
+ option proto dhcp
-## WAN configuration
-wan_ifname="eth0"
-wan_proto="dhcp"
-# Network configuration file
# Copyright (C) 2006 OpenWrt.org
-## LAN configuration
-lan_ifname="br0"
-lan_ifnames="eth1 eth2"
-lan_proto="static"
-lan_ipaddr="192.168.1.1"
-lan_netmask="255.255.255.0"
+config interface lan
+ option type bridge
+ option ifnames "eth1 eth2"
+ option proto static
+ option ipaddr 192.168.1.1
+ option netmask 255.255.255.0
+
+config interface wan
+ option ifname eth0
+ option proto dhcp
-## WAN configuration
-wan_ifname="eth0"
-wan_proto="dhcp"
# Network configuration file
-# Copyright (C) 2006 OpenWrt.org
-## LAN configuration
-lan_ifname="eth0"
-lan_proto="dhcp"
+config interface lan
+ option ifname eth0
+ option proto dhcp
+bridge_interface() {
+ (
+ . /etc/functions.sh
+ include network
+ scan_interfaces
+ cfg="$(find_config "$1")"
+ [ -z "$cfg" ] && return 0
+ config_get type "$cfg" type
+ [ "$type" = bridge ] && config_get "$type" bridge
+ )
+}
+
scan_broadcom() {
local device="$1"
config_get ifname "$vif" ifname
append if_up "ifconfig $ifname up" ";$N"
[ -z "$nasopts" ] || {
- config_get bridge "$vif" bridge # XXX: integrate with /etc/config/network later
+ bridge="$(bridge_interface "$ifname")"
eval "${vif}_ssid=\"\$ssid\""
mode="-A"
[ "$vif" = "$sta_if" ] && mode="-S"
#!/bin/sh
-. /etc/config/network
+. /etc/functions.sh
+include network
+scan_interfaces
# The following is to automatically configure the DHCP settings
# based on config settings. Feel free to replace all this crap
args=""
iface=lan
-eval "ifname=\${${iface}_ifname}"
+config_get ifname "$iface" ifname
dhcp_enable="${dhcp_enable:-1}"
dhcp_start="${dhcp_start:-100}"
# no existing DHCP server?
# calculate settings
- eval "ipaddr=\${${iface}_ipaddr}"
- eval "netmask=\${${iface}_netmask}"
+ config_get ipaddr "$iface" ipaddr
+ config_get netmask "$iface" netmask
eval $(ipcalc $ipaddr $netmask ${dhcp_start:-100} ${dhcp_num:-150})
# and pass the args via config parser defines
}
# ignore requests from wan interface
+ config_get wan_proto wan proto
+ config_get wan_ifname wan ifname
[ -z "$wan_proto" -o "$wan_proto" = "none" ] || echo "@define wan_ifname $wan_ifname"
cat /etc/dnsmasq.conf
# Copyright (C) 2006 OpenWrt.org
BEGIN {
- print ". /etc/config/network"
- print "proto=\"$wan_proto\""
- print "[ -z \"$proto\" -o \"$proto\" = \"none\" ] && exit"
- print "ifname=\"$wan_ifname\""
+ print "ifname=\"$WAN\""
print "[ -z \"$ifname\" ] && exit"
print ""
print "iptables -X input_$ifname 2>&- >&-"
## Please make changes in /etc/firewall.user
-. /etc/config/network
-WAN="$wan_ifname"
-LAN="$lan_ifname"
+. /etc/functions.sh
+include network
+
+scan_interfaces
+config_get WAN wan ifname
+config_get LAN lan ifname
## CLEAR TABLES
for T in filter nat; do
iptables -A INPUT -j input_rule
# allow
- [ -z "$WAN" ] || iptables -A INPUT -i \! $WAN -j ACCEPT # allow from lan/wifi interfaces
+ iptables -A INPUT ${WAN:+-i \! $WAN} -j ACCEPT # allow from lan/wifi interfaces
iptables -A INPUT -p icmp -j ACCEPT # allow ICMP
iptables -A INPUT -p gre -j ACCEPT # allow GRE
#!/bin/sh
# Copyright (C) 2006 OpenWrt.org
-. /etc/config/network
-
-WAN="$wan_ifname"
-LAN="$lan_ifname"
-
iptables -F input_rule
iptables -F output_rule
iptables -F forwarding_rule
endef
define Package/ppp/install
+ install -d -m0755 $(1)/lib/network
+ install -m0755 ./files/ppp.sh $(1)/lib/network/
install -d -m0755 $(1)/etc/ppp
install -m0600 ./files/etc/ppp/chap-secrets $(1)/etc/ppp/
install -m0644 ./files/etc/ppp/filter $(1)/etc/ppp/
endef
define Package/ppp-mod-pppoa/install
+ install -d -m0755 $(1)/lib/network
+ install -m0755 ./files/pppoa.sh $(1)/lib/network/
install -d -m0755 $(1)/usr/lib/pppd/$(PKG_VERSION)
install -m0755 $(PKG_INSTALL_DIR)/usr/lib/pppd/$(PKG_VERSION)/pppoatm.so \
$(1)/usr/lib/pppd/$(PKG_VERSION)/
- install -d -m0755 $(1)/sbin
- install -m0755 ./files/ifup.pppoa $(1)/sbin/
endef
define Package/ppp-mod-pppoe/install
+ install -d -m0755 $(1)/lib/network
+ install -m0755 ./files/pppoe.sh $(1)/lib/network/
install -d -m0755 $(1)/usr/lib/pppd/$(PKG_VERSION)
install -m0755 $(PKG_INSTALL_DIR)/usr/lib/pppd/$(PKG_VERSION)/rp-pppoe.so \
$(1)/usr/lib/pppd/$(PKG_VERSION)/
- install -d -m0755 $(1)/sbin
- install -m0755 ./files/ifup.pppoe $(1)/sbin/
endef
define Package/ppp-mod-radius/install
+++ /dev/null
-#!/bin/sh
-[ $# = 0 ] && { echo " $0 <group>"; exit; }
-. /etc/config/network
-type=$1
-
-eval "proto=\"\${${type}_proto}\""
-[ "$proto" = "pppoa" ] || {
- echo "$0: ${type}_proto isn't pppoa"
- exit
-}
-
-mkdir -p /var/lock
-
-for module in slhc ppp_generic pppoatm; do
- /sbin/insmod $module 2>&- >&-
-done
-
-KEEPALIVE=${ppp_redialperiod:+lcp-echo-interval $ppp_redialperiod lcp-echo-failure 5}
-case "$ppp_demand" in
- on|1|enabled)
- DEMAND=${ppp_idletime:+demand idle $ppp_idletime}
- [ -f /etc/ppp/filter ] && DEMAND=${DEMAND:+precompiled-active-filter /etc/ppp/filter $DEMAND}
- ;;
- *) DEMAND="persist";;
-esac
-MTU=${ppp_mtu:-1500}
-
-/usr/sbin/pppd \
- plugin pppoatm.so ${atm_vpi:-8}.${atm_vci:-35} \
- usepeerdns \
- defaultroute \
- linkname $type \
- ipparam $type \
- user "$ppp_username" \
- password "$ppp_passwd" \
- mtu $MTU mru $MTU \
- $DEMAND \
- $KEEPALIVE
+++ /dev/null
-#!/bin/sh
-[ $# = 0 ] && { echo " $0 <group>"; exit; }
-. /etc/config/network
-type=$1
-
-eval "proto=\"\${${type}_proto}\""
-[ "$proto" = "pppoe" ] || {
- echo "$0: ${type}_proto isn't pppoe"
- exit
-}
-
-mkdir -p /var/lock
-
-for module in slhc ppp_generic pppox pppoe; do
- /sbin/insmod $module 2>&- >&-
-done
-
-eval "IFNAME=\"\${${type}_device}\""
-KEEPALIVE=${ppp_redialperiod:+lcp-echo-interval $ppp_redialperiod lcp-echo-failure 5}
-case "$ppp_demand" in
- on|1|enabled)
- DEMAND=${ppp_idletime:+demand idle $ppp_idletime}
- [ -f /etc/ppp/filter ] && DEMAND=${DEMAND:+precompiled-active-filter /etc/ppp/filter $DEMAND}
- ;;
- *) DEMAND="persist";;
-esac
-MTU=${ppp_mtu:-1492}
-
-ifconfig $IFNAME up
-/usr/sbin/pppd \
- plugin rp-pppoe.so \
- connect /bin/true \
- usepeerdns \
- defaultroute \
- linkname $type \
- ipparam $type \
- user "$ppp_username" \
- password "$ppp_passwd" \
- mtu $MTU mru $MTU \
- $DEMAND \
- $KEEPALIVE \
- nic-$IFNAME
-
--- /dev/null
+scan_ppp() {
+ config_get ifname "$1" ifname
+ pppdev="${pppdev:-0}"
+ config_set "$1" device "$ifname"
+ config_set "$1" ifname "ppp$pppdev"
+ config_set "$1" unit "$pppdev"
+}
+
+start_pppd() {
+ local cfg="$1"; shift
+ config_get device "$cfg" device
+ config_get unit "$cfg" unit
+ config_get username "$cfg" username
+ config_get password "$cfg" password
+ config_get keepalive "$cfg" keepalive
+ config_get demand "$cfg" demand
+ [ -n "$demand" ] && echo "nameserver 1.1.1.1" > /tmp/resolv.conf
+ /usr/sbin/pppd "$@" \
+ ${keepalive:+lcp-echo-interval 5 lcp-echo-failure $keepalive} \
+ ${demand:+precompiled-active-filter /etc/ppp/filter demand idle }${demand:-persist} \
+ usepeerdns \
+ defaultroute \
+ replacedefaultroute \
+ ${username:+username "$username" password "$password"} \
+ linkname "$cfg" \
+ ipparam "$cfg"
+}
--- /dev/null
+scan_pppoa() {
+ scan_ppp "$@"
+}
+
+setup_interface_pppoa() {
+ local iface="$1"
+ local config="$2"
+
+ config_get device "$config" device
+
+ for module in slhc ppp_generic pppoatm; do
+ /sbin/insmod $module 2>&- >&-
+ done
+
+ config_get mtu "$cfg" mtu
+ mtu=${mtu:-1492}
+ start_pppd "$config" \
+ plugin pppoatm.so ${atm_vpi:-8}.${atm_vci:-35} \
+ mtu $mtu mru $mtu
+}
--- /dev/null
+scan_pppoe() {
+ scan_ppp "$@"
+}
+
+setup_interface_pppoe() {
+ local iface="$1"
+ local config="$2"
+
+ config_get device "$config" device
+
+ for module in slhc ppp_generic pppox pppoe; do
+ /sbin/insmod $module 2>&- >&-
+ done
+
+ config_get mtu "$cfg" mtu
+ mtu=${mtu:-1480}
+ start_pppd "$config" \
+ plugin rp-pppoe.so \
+ mtu $mtu mru $mtu \
+ "nic-$device"
+}
--- /dev/null
+scan_pptp() {
+ scan_ppp "$@"
+}
define Package/pptp/install
install -d -m0755 $(1)/etc/ppp
install -m0644 ./files/options.pptp $(1)/etc/ppp/
- install -d -m0755 $(1)/sbin
- install -m0755 ./files/ifup.pptp $(1)/sbin/
+ install -d -m0755 $(1)/lib/network
+ install -m0755 ./files/pptp.sh $(1)/lib/network/
install -d -m0755 $(1)/usr/sbin
install -m0755 $(PKG_BUILD_DIR)/pptp $(1)/usr/sbin/
endef
+++ /dev/null
-#!/bin/sh
-[ $# = 0 ] && { echo " $0 <group>"; exit; }
-. /etc/config/network
-type=$1
-
-eval "proto=\"\${${type}_proto}\""
-[ "$proto" = "pptp" ] || {
- echo "$0: ${type}_proto isn't pptp"
- exit
-}
-
-mkdir -p /var/lock
-
-for module in slhc ppp_generic ppp_async ip_gre; do
- /sbin/insmod $module 2>&- >&-
-done
-
-KEEPALIVE=${ppp_redialperiod:+lcp-echo-interval $ppp_redialperiod lcp-echo-failure 5}
-case "$ppp_demand" in
- on|1|enabled)
- DEMAND=${ppp_idletime:+demand idle $ppp_idletime}
- [ -f /etc/ppp/filter ] && DEMAND=${DEMAND:+precompiled-active-filter /etc/ppp/filter $DEMAND}
- ;;
- *) DEMAND="persist";;
-esac
-MTU=${ppp_mtu:-1452}
-
-[ "$pptp_proto" = "static" ] || pptp_proto="dhcp"
-do_ifup $pptp_proto $type
-
-/usr/sbin/pppd \
- pty "/usr/sbin/pptp $pptp_server_ip --loglevel 0 --nolaunchpppd" \
- file /etc/ppp/options.pptp \
- connect /bin/true \
- usepeerdns \
- defaultroute \
- replacedefaultroute \
- linkname "$type" \
- ipparam "$type" \
- user "$ppp_username" \
- password "$ppp_passwd" \
- mtu $MTU mru $MTU \
- $DEMAND \
- $KEEPALIVE
-
--- /dev/null
+scan_pppoe() {
+ scan_ppp "$@"
+}
+
+setup_interface_pppoe() {
+ local iface="$1"
+ local config="$2"
+
+ config_get device "$config" device
+
+ for module in slhc ppp_generic ppp_async ip_gre; do
+ /sbin/insmod $module 2>&- >&-
+ done
+ setup_interface "$iface" "$config" "dhcp"
+
+ config_get mtu "$cfg" mtu
+ mtu=${mtu:-1452}
+ start_pppd "$config" \
+ plugin rp-pppoe.so \
+ mtu $mtu mru $mtu \
+ "nic-$device"
+}
endef
define Package/kmod-switch/install
+ install -m0755 -d $(1)/lib/network/
+ install -m0755 ./files/switch.sh $(1)/lib/network/
+ install -m0755 -d $(1)/etc/modules.d/
+ printf 'switch-core\nswitch-robo\nswitch-adm\n' > $(1)/etc/modules.d/20-switch
install -m0755 -d $(1)/lib/modules/$(LINUX_VERSION)
$(CP) $(PKG_BUILD_DIR)/*.$(LINUX_KMOD_SUFFIX) \
$(1)/lib/modules/$(LINUX_VERSION)
--- /dev/null
+#!/bin/sh
+# Copyright (C) 2006 OpenWrt.org
+
+setup_switch_vlan() {
+ DIR="/proc/switch/$CONFIG_SECTION/vlan/$1"
+ [ -d "$DIR" ] || return 0
+
+ config_get ports "$CONFIG_SECTION" "vlan$1"
+ echo "$ports" > "$DIR/ports"
+}
+
+setup_switch() {
+ config_cb() {
+ case "$1" in
+ switch)
+ [ -n "$2" -a -d "/proc/switch/$2" ] && {
+ echo 1 > "/proc/switch/$2/reset"
+ echo 1 > "/proc/switch/$2/enable"
+ echo 1 > "/proc/switch/$2/enable_vlan"
+ option_cb() {
+ case "$1" in
+ vlan*) setup_switch_vlan "${1##vlan}";;
+ esac
+ }
+ }
+ ;;
+ *)
+ option_cb() { return 0; }
+ ;;
+ esac
+ }
+ config_load network
+}
projects / openwrt / svn-archive / archive.git / commitdiff