KERNEL_PATCHVER:=$(KERNEL_TESTING_PATCHVER)
endif
-LINUX_VERSION-4.19 = .138
LINUX_VERSION-5.4 = .72
-LINUX_KERNEL_HASH-4.19.138 = d15c27d05f6c527269b75b30cc72972748e55720e7e00ad8abbaa4fe3b1d5e02
LINUX_KERNEL_HASH-5.4.72 = 0e24645bd56fe5b55a7a662895f5562c103d71b54d097281f0c9c71ff22c1172
remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
+++ /dev/null
-# CONFIG_40x is not set
-CONFIG_44x=y
-CONFIG_460EX=y
-CONFIG_4xx=y
-CONFIG_4xx_SOC=y
-# CONFIG_ADVANCED_OPTIONS is not set
-CONFIG_APM821xx=y
-CONFIG_APOLLO3G=y
-# CONFIG_ARCHES is not set
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_ARCH_HAS_DMA_SET_COHERENT_MASK=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_MEMBARRIER_CALLBACKS=y
-CONFIG_ARCH_HAS_PHYS_TO_DMA=y
-CONFIG_ARCH_HAS_PTE_SPECIAL=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-CONFIG_ARCH_MMAP_RND_BITS=11
-CONFIG_ARCH_MMAP_RND_BITS_MAX=17
-CONFIG_ARCH_MMAP_RND_BITS_MIN=11
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y
-CONFIG_AUDIT_ARCH=y
-# CONFIG_BAMBOO is not set
-CONFIG_BCH=y
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLUESTONE=y
-CONFIG_BOOKE=y
-CONFIG_BOOKE_WDT=y
-# CONFIG_BOUNCE is not set
-CONFIG_BUILD_SALT=""
-# CONFIG_CANYONLANDS is not set
-CONFIG_CC_HAS_SANCOV_TRACE_PC=y
-CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
-CONFIG_CLANG_VERSION=0
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootfstype=squashfs noinitrd"
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CONSISTENT_SIZE=0x00200000
-CONFIG_CONSOLE_LOGLEVEL_QUIET=4
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CRC16=y
-# CONFIG_CRC32_SARWATE is not set
-CONFIG_CRC32_SLICEBY8=y
-CONFIG_CRYPTO_ACOMP2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_AKCIPHER2=y
-CONFIG_CRYPTO_CCM=y
-CONFIG_CRYPTO_CFB=y
-CONFIG_CRYPTO_CTR=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_DEV_PPC4XX=y
-CONFIG_CRYPTO_DRBG=y
-CONFIG_CRYPTO_DRBG_HMAC=y
-CONFIG_CRYPTO_DRBG_MENU=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_GCM=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_GHASH=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_JITTERENTROPY=y
-CONFIG_CRYPTO_KPP2=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_MD5_PPC=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_RNG_DEFAULT=y
-CONFIG_CRYPTO_SEQIV=y
-CONFIG_CRYPTO_SHA1_PPC=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DTC=y
-# CONFIG_E200 is not set
-CONFIG_EARLY_PRINTK=y
-# CONFIG_EBONY is not set
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-# CONFIG_EIGER is not set
-CONFIG_EXTRA_TARGETS="uImage"
-CONFIG_FIXED_PHY=y
-CONFIG_FREEZER=y
-# CONFIG_FSL_LBC is not set
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-# CONFIG_GEN_RTC is not set
-# CONFIG_GLACIER is not set
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_FASTPATH_LIMIT=512
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_CBPF_JIT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_GUP=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KPROBES_ON_FTRACE=y
-CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_RSEQ=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_PPC4XX=y
-CONFIG_HZ=1000
-CONFIG_HZ_1000=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IBM_IIC=y
-CONFIG_IBM_EMAC=y
-CONFIG_IBM_EMAC_EMAC4=y
-CONFIG_IBM_EMAC_POLL_WEIGHT=32
-CONFIG_IBM_EMAC_RGMII=y
-CONFIG_IBM_EMAC_RXB=128
-CONFIG_IBM_EMAC_RX_COPY_THRESHOLD=256
-CONFIG_IBM_EMAC_RX_SKB_HEADROOM=0
-CONFIG_IBM_EMAC_TAH=y
-CONFIG_IBM_EMAC_TXB=128
-# CONFIG_ICE is not set
-# CONFIG_ICON is not set
-CONFIG_ILLEGAL_POINTER_VALUE=0
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_ISA_DMA_API=y
-# CONFIG_JFFS2_FS is not set
-# CONFIG_KATMAI is not set
-CONFIG_KERNEL_GZIP=y
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_LEDS_TRIGGER_MTD=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-# CONFIG_MATH_EMULATION is not set
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MODULES_USE_ELF_RELA=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_BCH=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_ECC_BCH=y
-CONFIG_MTD_NAND_ECC_SMC=y
-CONFIG_MTD_NAND_NDFC=y
-# CONFIG_MTD_SPLIT_SQUASHFS_ROOT is not set
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-# CONFIG_NF_LOG_BRIDGE is not set
-CONFIG_NOT_COHERENT_CACHE=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NR_IRQS=512
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND=y
-# CONFIG_OVERLAY_FS_METACOPY is not set
-CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
-# CONFIG_OVERLAY_FS_XINO_AUTO is not set
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_PME=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_MSI=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYS_64BIT=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PM=y
-CONFIG_PM_AUTOSLEEP=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_PM_WAKELOCKS=y
-CONFIG_PM_WAKELOCKS_GC=y
-CONFIG_PM_WAKELOCKS_LIMIT=100
-CONFIG_PPC=y
-CONFIG_PPC32=y
-CONFIG_PPC44x_SIMPLE=y
-CONFIG_PPC4xx_CPM=y
-CONFIG_PPC4xx_GPIO=y
-CONFIG_PPC4xx_MSI=y
-CONFIG_PPC4xx_OCM=y
-CONFIG_PPC4xx_PCI_EXPRESS=y
-# CONFIG_PPC64 is not set
-# CONFIG_PPC_47x is not set
-# CONFIG_PPC_85xx is not set
-# CONFIG_PPC_8xx is not set
-CONFIG_PPC_ADV_DEBUG_DACS=2
-CONFIG_PPC_ADV_DEBUG_DAC_RANGE=y
-CONFIG_PPC_ADV_DEBUG_DVCS=2
-CONFIG_PPC_ADV_DEBUG_IACS=4
-CONFIG_PPC_ADV_DEBUG_REGS=y
-# CONFIG_PPC_BOOK3S_32 is not set
-CONFIG_PPC_DCR=y
-CONFIG_PPC_DCR_NATIVE=y
-# CONFIG_PPC_EARLY_DEBUG is not set
-CONFIG_PPC_FPU=y
-CONFIG_PPC_INDIRECT_PCI=y
-# CONFIG_PPC_IRQ_SOFT_MASK_DEBUG is not set
-CONFIG_PPC_LIB_RHEAP=y
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_MSI_BITMAP=y
-CONFIG_PPC_PCI_CHOICE=y
-# CONFIG_PPC_PTDUMP is not set
-CONFIG_PPC_UDBG_16550=y
-CONFIG_PPC_WERROR=y
-CONFIG_PTE_64BIT=y
-# CONFIG_RAINIER is not set
-# CONFIG_RANDOM_TRUST_CPU is not set
-CONFIG_RAS=y
-CONFIG_RD_GZIP=y
-# CONFIG_RENESAS_PHY is not set
-# CONFIG_RPMSG_VIRTIO is not set
-CONFIG_RSEQ=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_SAM440EP is not set
-# CONFIG_SEQUOIA is not set
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SIMPLE_GPIO=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SRCU=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-# CONFIG_TAISHAN is not set
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_THREAD_SHIFT=13
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TINY_SRCU=y
-CONFIG_USB_SUPPORT=y
-CONFIG_VDSO32=y
-# CONFIG_VIRTIO_MENU is not set
-# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
-# CONFIG_WARP is not set
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_WNDR4700 is not set
-# CONFIG_XILINX_SYSACE is not set
-# CONFIG_XILINX_VCU is not set
-# CONFIG_XILINX_VIRTEX440_GENERIC_BOARD is not set
-# CONFIG_XIL_AXIS_FIFO is not set
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_XZ_DEC_POWERPC=y
-# CONFIG_YOSEMITE is not set
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
+++ /dev/null
-From 538098281ce884a51d2aa4ab445056a41741c6ad Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sat, 17 Nov 2018 17:17:20 +0100
-Subject: [PATCH] dt-bindings: dmaengine: dw-dmac: add protection control
- property
-
-This patch for the DesignWare AHB Central
-Direct Memory Access Controller adds the dma
-protection control property:
- "snps,dma-protection-control"
-
-as well as the properties specific values defines into
-a new include file: include/dt-bindings/dma/dw-dmac.h
-
-Note: The protection control signals are one-to-one
-mapped to the AHB HPROT[1:3] signals for this controller.
-The HPROT0 (Data Access) is always hardwired to 1.
-
-Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-Signed-off-by: Vinod Koul <vkoul@kernel.org>
----
- Documentation/devicetree/bindings/dma/snps-dma.txt | 4 ++++
- MAINTAINERS | 4 +++-
- include/dt-bindings/dma/dw-dmac.h | 14 ++++++++++++++
- 3 files changed, 21 insertions(+), 1 deletion(-)
- create mode 100644 include/dt-bindings/dma/dw-dmac.h
-
---- a/Documentation/devicetree/bindings/dma/snps-dma.txt
-+++ b/Documentation/devicetree/bindings/dma/snps-dma.txt
-@@ -27,6 +27,10 @@ Optional properties:
- general purpose DMA channel allocator. False if not passed.
- - multi-block: Multi block transfers supported by hardware. Array property with
- one cell per channel. 0: not supported, 1 (default): supported.
-+- snps,dma-protection-control: AHB HPROT[3:1] protection setting.
-+ The default value is 0 (for non-cacheable, non-buffered,
-+ unprivileged data access).
-+ Refer to include/dt-bindings/dma/dw-dmac.h for possible values.
-
- Example:
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -14075,9 +14075,11 @@ SYNOPSYS DESIGNWARE DMAC DRIVER
- M: Viresh Kumar <vireshk@kernel.org>
- R: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
- S: Maintained
-+F: Documentation/devicetree/bindings/dma/snps-dma.txt
-+F: drivers/dma/dw/
-+F: include/dt-bindings/dma/dw-dmac.h
- F: include/linux/dma/dw.h
- F: include/linux/platform_data/dma-dw.h
--F: drivers/dma/dw/
-
- SYNOPSYS DESIGNWARE ENTERPRISE ETHERNET DRIVER
- M: Jose Abreu <Jose.Abreu@synopsys.com>
---- /dev/null
-+++ b/include/dt-bindings/dma/dw-dmac.h
-@@ -0,0 +1,14 @@
-+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
-+
-+#ifndef __DT_BINDINGS_DMA_DW_DMAC_H__
-+#define __DT_BINDINGS_DMA_DW_DMAC_H__
-+
-+/*
-+ * Protection Control bits provide protection against illegal transactions.
-+ * The protection bits[0:2] are one-to-one mapped to AHB HPROT[3:1] signals.
-+ */
-+#define DW_DMAC_HPROT1_PRIVILEGED_MODE (1 << 0) /* Privileged Mode */
-+#define DW_DMAC_HPROT2_BUFFERABLE (1 << 1) /* DMA is bufferable */
-+#define DW_DMAC_HPROT3_CACHEABLE (1 << 2) /* DMA is cacheable */
-+
-+#endif /* __DT_BINDINGS_DMA_DW_DMAC_H__ */
+++ /dev/null
-From 1ad0f1603a6b2afb62a1c065409aaa4e43ca7627 Mon Sep 17 00:00:00 2001
-From: Eric Biggers <ebiggers@google.com>
-Date: Wed, 14 Nov 2018 12:19:39 -0800
-Subject: [PATCH 03/15] crypto: drop mask=CRYPTO_ALG_ASYNC from 'cipher' tfm
- allocations
-
-'cipher' algorithms (single block ciphers) are always synchronous, so
-passing CRYPTO_ALG_ASYNC in the mask to crypto_alloc_cipher() has no
-effect. Many users therefore already don't pass it, but some still do.
-This inconsistency can cause confusion, especially since the way the
-'mask' argument works is somewhat counterintuitive.
-
-Thus, just remove the unneeded CRYPTO_ALG_ASYNC flags.
-
-This patch shouldn't change any actual behavior.
-
-Signed-off-by: Eric Biggers <ebiggers@google.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
----
- drivers/crypto/amcc/crypto4xx_alg.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/drivers/crypto/amcc/crypto4xx_alg.c
-+++ b/drivers/crypto/amcc/crypto4xx_alg.c
-@@ -540,8 +540,7 @@ static int crypto4xx_compute_gcm_hash_ke
- uint8_t src[16] = { 0 };
- int rc = 0;
-
-- aes_tfm = crypto_alloc_cipher("aes", 0, CRYPTO_ALG_ASYNC |
-- CRYPTO_ALG_NEED_FALLBACK);
-+ aes_tfm = crypto_alloc_cipher("aes", 0, CRYPTO_ALG_NEED_FALLBACK);
- if (IS_ERR(aes_tfm)) {
- rc = PTR_ERR(aes_tfm);
- pr_warn("could not load aes cipher driver: %d\n", rc);
+++ /dev/null
-From 67d8208fba1324fa0198f9fc58a9edbe09596947 Mon Sep 17 00:00:00 2001
-From: Christoph Hellwig <hch@lst.de>
-Date: Sun, 16 Dec 2018 18:19:46 +0100
-Subject: [PATCH 04/15] crypto4xx_core: don't abuse __dma_sync_page
-
-This function is internal to the DMA API implementation. Instead use
-the DMA API to properly unmap. Note that the DMA API usage in this
-driver is a disaster and urgently needs some work - it is missing all
-the unmaps, seems to do a secondary map where it looks like it should
-to a unmap in one place to work around cache coherency and the
-directions passed in seem to be partially wrong.
-
-Signed-off-by: Christoph Hellwig <hch@lst.de>
-Tested-by: Christian Lamparter <chunkeey@gmail.com>
-Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
----
- drivers/crypto/amcc/crypto4xx_core.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/crypto/amcc/crypto4xx_core.c
-+++ b/drivers/crypto/amcc/crypto4xx_core.c
-@@ -592,7 +592,7 @@ static void crypto4xx_aead_done(struct c
- pd->pd_ctl_len.bf.pkt_len,
- dst);
- } else {
-- __dma_sync_page(sg_page(dst), dst->offset, dst->length,
-+ dma_unmap_page(dev->core_dev->device, pd->dest, dst->length,
- DMA_FROM_DEVICE);
- }
-
+++ /dev/null
-From 750afb08ca71310fcf0c4e2cb1565c63b8235b60 Mon Sep 17 00:00:00 2001
-From: Luis Chamberlain <mcgrof@kernel.org>
-Date: Fri, 4 Jan 2019 09:23:09 +0100
-Subject: [PATCH 05/15] cross-tree: phase out dma_zalloc_coherent()
-
-We already need to zero out memory for dma_alloc_coherent(), as such
-using dma_zalloc_coherent() is superflous. Phase it out.
-
-This change was generated with the following Coccinelle SmPL patch:
-
-@ replace_dma_zalloc_coherent @
-expression dev, size, data, handle, flags;
-@@
-
--dma_zalloc_coherent(dev, size, handle, flags)
-+dma_alloc_coherent(dev, size, handle, flags)
-
-Suggested-by: Christoph Hellwig <hch@lst.de>
-Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
-[hch: re-ran the script on the latest tree]
-Signed-off-by: Christoph Hellwig <hch@lst.de>
----
- drivers/crypto/amcc/crypto4xx_core.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/drivers/crypto/amcc/crypto4xx_core.c
-+++ b/drivers/crypto/amcc/crypto4xx_core.c
-@@ -283,9 +283,9 @@ static u32 crypto4xx_put_pd_to_pdr(struc
- */
- static u32 crypto4xx_build_gdr(struct crypto4xx_device *dev)
- {
-- dev->gdr = dma_zalloc_coherent(dev->core_dev->device,
-- sizeof(struct ce_gd) * PPC4XX_NUM_GD,
-- &dev->gdr_pa, GFP_ATOMIC);
-+ dev->gdr = dma_alloc_coherent(dev->core_dev->device,
-+ sizeof(struct ce_gd) * PPC4XX_NUM_GD,
-+ &dev->gdr_pa, GFP_ATOMIC);
- if (!dev->gdr)
- return -ENOMEM;
-
+++ /dev/null
-From d072bfa4885354fff86aa1fb1dbc4f1533c9e0bf Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sun, 23 Dec 2018 02:16:13 +0100
-Subject: [PATCH 06/15] crypto: crypto4xx - add prng crypto support
-
-This patch adds support for crypto4xx's ANSI X9.17 Annex C compliant
-pseudo random number generator which provides a pseudo random source
-for the purpose of generating Initialization Vectors (IV's) for AES
-algorithms to the Packet Engine and other pseudo random number
-requirements.
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
----
- drivers/crypto/amcc/crypto4xx_core.c | 87 +++++++++++++++++++++++++
- drivers/crypto/amcc/crypto4xx_core.h | 4 ++
- drivers/crypto/amcc/crypto4xx_reg_def.h | 1 +
- 3 files changed, 92 insertions(+)
-
---- a/drivers/crypto/amcc/crypto4xx_core.c
-+++ b/drivers/crypto/amcc/crypto4xx_core.c
-@@ -40,9 +40,11 @@
- #include <crypto/ctr.h>
- #include <crypto/gcm.h>
- #include <crypto/sha.h>
-+#include <crypto/rng.h>
- #include <crypto/scatterwalk.h>
- #include <crypto/skcipher.h>
- #include <crypto/internal/aead.h>
-+#include <crypto/internal/rng.h>
- #include <crypto/internal/skcipher.h>
- #include "crypto4xx_reg_def.h"
- #include "crypto4xx_core.h"
-@@ -1042,6 +1044,10 @@ static int crypto4xx_register_alg(struct
- rc = crypto_register_ahash(&alg->alg.u.hash);
- break;
-
-+ case CRYPTO_ALG_TYPE_RNG:
-+ rc = crypto_register_rng(&alg->alg.u.rng);
-+ break;
-+
- default:
- rc = crypto_register_skcipher(&alg->alg.u.cipher);
- break;
-@@ -1071,6 +1077,10 @@ static void crypto4xx_unregister_alg(str
- crypto_unregister_aead(&alg->alg.u.aead);
- break;
-
-+ case CRYPTO_ALG_TYPE_RNG:
-+ crypto_unregister_rng(&alg->alg.u.rng);
-+ break;
-+
- default:
- crypto_unregister_skcipher(&alg->alg.u.cipher);
- }
-@@ -1129,6 +1139,69 @@ static irqreturn_t crypto4xx_ce_interrup
- PPC4XX_TMO_ERR_INT);
- }
-
-+static int ppc4xx_prng_data_read(struct crypto4xx_device *dev,
-+ u8 *data, unsigned int max)
-+{
-+ unsigned int i, curr = 0;
-+ u32 val[2];
-+
-+ do {
-+ /* trigger PRN generation */
-+ writel(PPC4XX_PRNG_CTRL_AUTO_EN,
-+ dev->ce_base + CRYPTO4XX_PRNG_CTRL);
-+
-+ for (i = 0; i < 1024; i++) {
-+ /* usually 19 iterations are enough */
-+ if ((readl(dev->ce_base + CRYPTO4XX_PRNG_STAT) &
-+ CRYPTO4XX_PRNG_STAT_BUSY))
-+ continue;
-+
-+ val[0] = readl_be(dev->ce_base + CRYPTO4XX_PRNG_RES_0);
-+ val[1] = readl_be(dev->ce_base + CRYPTO4XX_PRNG_RES_1);
-+ break;
-+ }
-+ if (i == 1024)
-+ return -ETIMEDOUT;
-+
-+ if ((max - curr) >= 8) {
-+ memcpy(data, &val, 8);
-+ data += 8;
-+ curr += 8;
-+ } else {
-+ /* copy only remaining bytes */
-+ memcpy(data, &val, max - curr);
-+ break;
-+ }
-+ } while (curr < max);
-+
-+ return curr;
-+}
-+
-+static int crypto4xx_prng_generate(struct crypto_rng *tfm,
-+ const u8 *src, unsigned int slen,
-+ u8 *dstn, unsigned int dlen)
-+{
-+ struct rng_alg *alg = crypto_rng_alg(tfm);
-+ struct crypto4xx_alg *amcc_alg;
-+ struct crypto4xx_device *dev;
-+ int ret;
-+
-+ amcc_alg = container_of(alg, struct crypto4xx_alg, alg.u.rng);
-+ dev = amcc_alg->dev;
-+
-+ mutex_lock(&dev->core_dev->rng_lock);
-+ ret = ppc4xx_prng_data_read(dev, dstn, dlen);
-+ mutex_unlock(&dev->core_dev->rng_lock);
-+ return ret;
-+}
-+
-+
-+static int crypto4xx_prng_seed(struct crypto_rng *tfm, const u8 *seed,
-+ unsigned int slen)
-+{
-+ return 0;
-+}
-+
- /**
- * Supported Crypto Algorithms
- */
-@@ -1298,6 +1371,18 @@ static struct crypto4xx_alg_common crypt
- .cra_module = THIS_MODULE,
- },
- } },
-+ { .type = CRYPTO_ALG_TYPE_RNG, .u.rng = {
-+ .base = {
-+ .cra_name = "stdrng",
-+ .cra_driver_name = "crypto4xx_rng",
-+ .cra_priority = 300,
-+ .cra_ctxsize = 0,
-+ .cra_module = THIS_MODULE,
-+ },
-+ .generate = crypto4xx_prng_generate,
-+ .seed = crypto4xx_prng_seed,
-+ .seedsize = 0,
-+ } },
- };
-
- /**
-@@ -1367,6 +1452,7 @@ static int crypto4xx_probe(struct platfo
- core_dev->dev->core_dev = core_dev;
- core_dev->dev->is_revb = is_revb;
- core_dev->device = dev;
-+ mutex_init(&core_dev->rng_lock);
- spin_lock_init(&core_dev->lock);
- INIT_LIST_HEAD(&core_dev->dev->alg_list);
- ratelimit_default_init(&core_dev->dev->aead_ratelimit);
-@@ -1446,6 +1532,7 @@ static int crypto4xx_remove(struct platf
- tasklet_kill(&core_dev->tasklet);
- /* Un-register with Linux CryptoAPI */
- crypto4xx_unregister_alg(core_dev->dev);
-+ mutex_destroy(&core_dev->rng_lock);
- /* Free all allocated memory */
- crypto4xx_stop_all(core_dev);
-
---- a/drivers/crypto/amcc/crypto4xx_core.h
-+++ b/drivers/crypto/amcc/crypto4xx_core.h
-@@ -23,8 +23,10 @@
- #define __CRYPTO4XX_CORE_H__
-
- #include <linux/ratelimit.h>
-+#include <linux/mutex.h>
- #include <crypto/internal/hash.h>
- #include <crypto/internal/aead.h>
-+#include <crypto/internal/rng.h>
- #include <crypto/internal/skcipher.h>
- #include "crypto4xx_reg_def.h"
- #include "crypto4xx_sa.h"
-@@ -119,6 +121,7 @@ struct crypto4xx_core_device {
- u32 irq;
- struct tasklet_struct tasklet;
- spinlock_t lock;
-+ struct mutex rng_lock;
- };
-
- struct crypto4xx_ctx {
-@@ -143,6 +146,7 @@ struct crypto4xx_alg_common {
- struct skcipher_alg cipher;
- struct ahash_alg hash;
- struct aead_alg aead;
-+ struct rng_alg rng;
- } u;
- };
-
---- a/drivers/crypto/amcc/crypto4xx_reg_def.h
-+++ b/drivers/crypto/amcc/crypto4xx_reg_def.h
-@@ -100,6 +100,7 @@
- #define CRYPTO4XX_ENDIAN_CFG 0x000600d8
-
- #define CRYPTO4XX_PRNG_STAT 0x00070000
-+#define CRYPTO4XX_PRNG_STAT_BUSY 0x1
- #define CRYPTO4XX_PRNG_CTRL 0x00070004
- #define CRYPTO4XX_PRNG_SEED_L 0x00070008
- #define CRYPTO4XX_PRNG_SEED_H 0x0007000c
+++ /dev/null
-From 38cf5533d7a876f75088bacc1277046f30005f28 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Mon, 22 Apr 2019 13:26:01 +0200
-Subject: [PATCH 12/15] crypto: crypto4xx - get rid of redundant using_sd
- variable
-
-using_sd is used as a stand-in for sa_command_0.bf.scatter
-that we need to set anyway, so we might as well just prevent
-double-accounting.
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
----
- drivers/crypto/amcc/crypto4xx_core.c | 6 ++----
- drivers/crypto/amcc/crypto4xx_core.h | 1 -
- 2 files changed, 2 insertions(+), 5 deletions(-)
-
---- a/drivers/crypto/amcc/crypto4xx_core.c
-+++ b/drivers/crypto/amcc/crypto4xx_core.c
-@@ -535,7 +535,7 @@ static void crypto4xx_cipher_done(struct
-
- req = skcipher_request_cast(pd_uinfo->async_req);
-
-- if (pd_uinfo->using_sd) {
-+ if (pd_uinfo->sa_va->sa_command_0.bf.scatter) {
- crypto4xx_copy_pkt_to_dst(dev, pd, pd_uinfo,
- req->cryptlen, req->dst);
- } else {
-@@ -589,7 +589,7 @@ static void crypto4xx_aead_done(struct c
- u32 icv[AES_BLOCK_SIZE];
- int err = 0;
-
-- if (pd_uinfo->using_sd) {
-+ if (pd_uinfo->sa_va->sa_command_0.bf.scatter) {
- crypto4xx_copy_pkt_to_dst(dev, pd, pd_uinfo,
- pd->pd_ctl_len.bf.pkt_len,
- dst);
-@@ -883,7 +883,6 @@ int crypto4xx_build_pd(struct crypto_asy
- * we know application give us dst a whole piece of memory
- * no need to use scatter ring.
- */
-- pd_uinfo->using_sd = 0;
- pd_uinfo->first_sd = 0xffffffff;
- sa->sa_command_0.bf.scatter = 0;
- pd->dest = (u32)dma_map_page(dev->core_dev->device,
-@@ -897,7 +896,6 @@ int crypto4xx_build_pd(struct crypto_asy
- u32 sd_idx = fst_sd;
- nbytes = datalen;
- sa->sa_command_0.bf.scatter = 1;
-- pd_uinfo->using_sd = 1;
- pd_uinfo->first_sd = fst_sd;
- sd = crypto4xx_get_sdp(dev, &sd_dma, sd_idx);
- pd->dest = sd_dma;
---- a/drivers/crypto/amcc/crypto4xx_core.h
-+++ b/drivers/crypto/amcc/crypto4xx_core.h
-@@ -64,7 +64,6 @@ union shadow_sa_buf {
- struct pd_uinfo {
- struct crypto4xx_device *dev;
- u32 state;
-- u32 using_sd;
- u32 first_gd; /* first gather discriptor
- used by this packet */
- u32 num_gd; /* number of gather discriptor
+++ /dev/null
-From cc809a441d8f2924f785eb863dfa6aef47a25b0b Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 12 Aug 2014 20:49:27 +0200
-Subject: [PATCH 30/36] GPIO: add named gpio exports
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/gpio/gpiolib-of.c | 68 +++++++++++++++++++++++++++++++++++++++++
- drivers/gpio/gpiolib.c | 11 +++++--
- include/asm-generic/gpio.h | 5 +++
- include/linux/gpio/consumer.h | 8 +++++
- 4 files changed, 90 insertions(+), 2 deletions(-)
-
---- a/drivers/gpio/gpiolib-of.c
-+++ b/drivers/gpio/gpiolib-of.c
-@@ -23,6 +23,8 @@
- #include <linux/pinctrl/pinctrl.h>
- #include <linux/slab.h>
- #include <linux/gpio/machine.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-
- #include "gpiolib.h"
-
-@@ -660,3 +662,72 @@ void of_gpiochip_remove(struct gpio_chip
- gpiochip_remove_pin_ranges(chip);
- of_node_put(chip->of_node);
- }
-+
-+#ifdef CONFIG_GPIO_SYSFS
-+
-+static struct of_device_id gpio_export_ids[] = {
-+ { .compatible = "gpio-export" },
-+ { /* sentinel */ }
-+};
-+
-+static int of_gpio_export_probe(struct platform_device *pdev)
-+{
-+ struct device_node *np = pdev->dev.of_node;
-+ struct device_node *cnp;
-+ u32 val;
-+ int nb = 0;
-+
-+ for_each_child_of_node(np, cnp) {
-+ const char *name = NULL;
-+ int gpio;
-+ bool dmc;
-+ int max_gpio = 1;
-+ int i;
-+
-+ of_property_read_string(cnp, "gpio-export,name", &name);
-+
-+ if (!name)
-+ max_gpio = of_gpio_count(cnp);
-+
-+ for (i = 0; i < max_gpio; i++) {
-+ unsigned flags = 0;
-+ enum of_gpio_flags of_flags;
-+
-+ gpio = of_get_gpio_flags(cnp, i, &of_flags);
-+ if (!gpio_is_valid(gpio))
-+ return gpio;
-+
-+ if (of_flags == OF_GPIO_ACTIVE_LOW)
-+ flags |= GPIOF_ACTIVE_LOW;
-+
-+ if (!of_property_read_u32(cnp, "gpio-export,output", &val))
-+ flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
-+ else
-+ flags |= GPIOF_IN;
-+
-+ if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np)))
-+ continue;
-+
-+ dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change");
-+ gpio_export_with_name(gpio, dmc, name);
-+ nb++;
-+ }
-+ }
-+
-+ dev_info(&pdev->dev, "%d gpio(s) exported\n", nb);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver gpio_export_driver = {
-+ .driver = {
-+ .name = "gpio-export",
-+ .owner = THIS_MODULE,
-+ .of_match_table = of_match_ptr(gpio_export_ids),
-+ },
-+ .probe = of_gpio_export_probe,
-+};
-+
-+module_platform_driver(gpio_export_driver);
-+
-+#endif
---- a/include/asm-generic/gpio.h
-+++ b/include/asm-generic/gpio.h
-@@ -127,6 +127,12 @@ static inline int gpio_export(unsigned g
- return gpiod_export(gpio_to_desc(gpio), direction_may_change);
- }
-
-+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
-+static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name)
-+{
-+ return __gpiod_export(gpio_to_desc(gpio), direction_may_change, name);
-+}
-+
- static inline int gpio_export_link(struct device *dev, const char *name,
- unsigned gpio)
- {
---- a/include/linux/gpio/consumer.h
-+++ b/include/linux/gpio/consumer.h
-@@ -533,6 +533,7 @@ struct gpio_desc *devm_fwnode_get_gpiod_
-
- #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS)
-
-+int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
- int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
- int gpiod_export_link(struct device *dev, const char *name,
- struct gpio_desc *desc);
-@@ -540,6 +541,13 @@ void gpiod_unexport(struct gpio_desc *de
-
- #else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */
-
-+static inline int _gpiod_export(struct gpio_desc *desc,
-+ bool direction_may_change,
-+ const char *name)
-+{
-+ return -ENOSYS;
-+}
-+
- static inline int gpiod_export(struct gpio_desc *desc,
- bool direction_may_change)
- {
---- a/drivers/gpio/gpiolib-sysfs.c
-+++ b/drivers/gpio/gpiolib-sysfs.c
-@@ -568,7 +568,7 @@ static struct class gpio_class = {
- *
- * Returns zero on success, else an error.
- */
--int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
-+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name)
- {
- struct gpio_chip *chip;
- struct gpio_device *gdev;
-@@ -630,6 +630,8 @@ int gpiod_export(struct gpio_desc *desc,
- offset = gpio_chip_hwgpio(desc);
- if (chip->names && chip->names[offset])
- ioname = chip->names[offset];
-+ if (name)
-+ ioname = name;
-
- dev = device_create_with_groups(&gpio_class, &gdev->dev,
- MKDEV(0, 0), data, gpio_groups,
-@@ -651,6 +653,12 @@ err_unlock:
- gpiod_dbg(desc, "%s: status %d\n", __func__, status);
- return status;
- }
-+EXPORT_SYMBOL_GPL(__gpiod_export);
-+
-+int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
-+{
-+ return __gpiod_export(desc, direction_may_change, NULL);
-+}
- EXPORT_SYMBOL_GPL(gpiod_export);
-
- static int match_export(struct device *dev, const void *desc)
+++ /dev/null
---- a/arch/powerpc/platforms/44x/Kconfig
-+++ b/arch/powerpc/platforms/44x/Kconfig
-@@ -131,6 +131,17 @@ config CANYONLANDS
- help
- This option enables support for the AMCC PPC460EX evaluation board.
-
-+config APOLLO3G
-+ bool "Apollo3G"
-+ depends on 44x
-+ default n
-+ select PPC44x_SIMPLE
-+ select APM821xx
-+ select IBM_EMAC_RGMII
-+ select 460EX
-+ help
-+ This option enables support for the AMCC Apollo 3G board.
-+
- config GLACIER
- bool "Glacier"
- depends on 44x
---- a/arch/powerpc/platforms/44x/ppc44x_simple.c
-+++ b/arch/powerpc/platforms/44x/ppc44x_simple.c
-@@ -50,6 +50,7 @@ machine_device_initcall(ppc44x_simple, p
- * board.c file for it rather than adding it to this list.
- */
- static char *board[] __initdata = {
-+ "amcc,apollo3g",
- "amcc,arches",
- "amcc,bamboo",
- "apm,bluestone",
+++ /dev/null
---- a/arch/powerpc/platforms/44x/Makefile
-+++ b/arch/powerpc/platforms/44x/Makefile
-@@ -4,6 +4,7 @@ ifneq ($(CONFIG_PPC4xx_CPM),y)
- obj-y += idle.o
- endif
- obj-$(CONFIG_PPC44x_SIMPLE) += ppc44x_simple.o
-+obj-$(CONFIG_WNDR4700) += wndr4700.o
- obj-$(CONFIG_EBONY) += ebony.o
- obj-$(CONFIG_SAM440EP) += sam440ep.o
- obj-$(CONFIG_WARP) += warp.o
---- a/arch/powerpc/platforms/44x/Kconfig
-+++ b/arch/powerpc/platforms/44x/Kconfig
-@@ -260,6 +260,19 @@ config ICON
- help
- This option enables support for the AMCC PPC440SPe evaluation board.
-
-+config WNDR4700
-+ bool "WNDR4700"
-+ depends on 44x
-+ default n
-+ select APM821xx
-+ select PCI_MSI
-+ select PPC4xx_MSI
-+ select PPC4xx_PCI_EXPRESS
-+ select IBM_EMAC_RGMII
-+ select 460EX
-+ help
-+ This option enables support for the Netgear WNDR4700/WNDR4720 board.
-+
- config XILINX_VIRTEX440_GENERIC_BOARD
- bool "Generic Xilinx Virtex 5 FXT board support"
- depends on 44x
+++ /dev/null
---- a/arch/powerpc/platforms/4xx/pci.c
-+++ b/arch/powerpc/platforms/4xx/pci.c
-@@ -1060,15 +1060,24 @@ static int __init apm821xx_pciex_init_po
- u32 val;
-
- /*
-- * Do a software reset on PCIe ports.
-- * This code is to fix the issue that pci drivers doesn't re-assign
-- * bus number for PCIE devices after Uboot
-- * scanned and configured all the buses (eg. PCIE NIC IntelPro/1000
-- * PT quad port, SAS LSI 1064E)
-+ * Only reset the PHY when no link is currently established.
-+ * This is for the Atheros PCIe board which has problems to establish
-+ * the link (again) after this PHY reset. All other currently tested
-+ * PCIe boards don't show this problem.
- */
--
-- mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x0);
-- mdelay(10);
-+ val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
-+ if (!(val & 0x00001000)) {
-+ /*
-+ * Do a software reset on PCIe ports.
-+ * This code is to fix the issue that pci drivers doesn't re-assign
-+ * bus number for PCIE devices after Uboot
-+ * scanned and configured all the buses (eg. PCIE NIC IntelPro/1000
-+ * PT quad port, SAS LSI 1064E)
-+ */
-+
-+ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x0);
-+ mdelay(10);
-+ }
-
- if (port->endpoint)
- val = PTYPE_LEGACY_ENDPOINT << 20;
-@@ -1085,9 +1094,12 @@ static int __init apm821xx_pciex_init_po
- mtdcri(SDR0, PESDR0_460EX_L0DRV, 0x00000130);
- mtdcri(SDR0, PESDR0_460EX_L0CLK, 0x00000006);
-
-- mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000);
-- mdelay(50);
-- mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000);
-+ val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP);
-+ if (!(val & 0x00001000)) {
-+ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000);
-+ mdelay(50);
-+ mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000);
-+ }
-
- mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET,
- mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) |
+++ /dev/null
---- a/arch/powerpc/platforms/4xx/pci.c
-+++ b/arch/powerpc/platforms/4xx/pci.c
-@@ -1903,9 +1903,9 @@ static void __init ppc4xx_configure_pcie
- * if it works
- */
- out_le32(mbase + PECFG_PIM0LAL, 0x00000000);
-- out_le32(mbase + PECFG_PIM0LAH, 0x00000000);
-+ out_le32(mbase + PECFG_PIM0LAH, 0x00000008);
- out_le32(mbase + PECFG_PIM1LAL, 0x00000000);
-- out_le32(mbase + PECFG_PIM1LAH, 0x00000000);
-+ out_le32(mbase + PECFG_PIM1LAH, 0x0000000c);
- out_le32(mbase + PECFG_PIM01SAH, 0xffff0000);
- out_le32(mbase + PECFG_PIM01SAL, 0x00000000);
-
+++ /dev/null
-From 419992bae5aaa4e06402e0b7c79fcf7bcb6b4764 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@googlemail.com>
-Date: Thu, 2 Jun 2016 00:48:46 +0200
-Subject: [PATCH] usb: xhci: add firmware loader for uPD720201 and uPD720202
- w/o ROM
-
-This patch adds a firmware loader for the uPD720201K8-711-BAC-A
-and uPD720202K8-711-BAA-A variant. Both of these chips are listed
-in Renesas' R19UH0078EJ0500 Rev.5.00 "User's Manual: Hardware" as
-devices which need the firmware loader on page 2 in order to
-work as they "do not support the External ROM".
-
-The "Firmware Download Sequence" is describe in chapter
-"7.1 FW Download Interface" R19UH0078EJ0500 Rev.5.00 page 131.
-
-The firmware "K2013080.mem" is available from a USB3.0 Host to
-PCIe Adapter (PP2U-E card) "Firmware download" archive. An
-alternative version can be sourced from Netgear's WNDR4700 GPL
-archives.
-
-The release notes of the PP2U-E's "Firmware Download" ver 2.0.1.3
-(2012-06-15) state that the firmware is for the following devices:
- - uPD720201 ES 2.0 sample whose revision ID is 2.
- - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3.
- - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2.
-
-If someone from Renesas is listening: It would be great, if these
-firmwares could be added to linux-firmware.git.
-
-Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
-Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
----
- drivers/usb/host/xhci-pci.c | 492 ++++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 492 insertions(+)
-
---- a/drivers/usb/host/xhci-pci.c
-+++ b/drivers/usb/host/xhci-pci.c
-@@ -12,6 +12,8 @@
- #include <linux/slab.h>
- #include <linux/module.h>
- #include <linux/acpi.h>
-+#include <linux/firmware.h>
-+#include <asm/unaligned.h>
-
- #include "xhci.h"
- #include "xhci-trace.h"
-@@ -268,6 +270,458 @@ static void xhci_pme_acpi_rtd3_enable(st
- static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { }
- #endif /* CONFIG_ACPI */
-
-+static const struct renesas_fw_entry {
-+ const char *firmware_name;
-+ u16 device;
-+ u8 revision;
-+ u16 expected_version;
-+} renesas_fw_table[] = {
-+ /*
-+ * Only the uPD720201K8-711-BAC-A or uPD720202K8-711-BAA-A
-+ * are listed in R19UH0078EJ0500 Rev.5.00 as devices which
-+ * need the software loader.
-+ *
-+ * PP2U/ReleaseNote_USB3-201-202-FW.txt:
-+ *
-+ * Note: This firmware is for the following devices.
-+ * - uPD720201 ES 2.0 sample whose revision ID is 2.
-+ * - uPD720201 ES 2.1 sample & CS sample & Mass product, ID is 3.
-+ * - uPD720202 ES 2.0 sample & CS sample & Mass product, ID is 2.
-+ */
-+ { "K2013080.mem", 0x0014, 0x02, 0x2013 },
-+ { "K2013080.mem", 0x0014, 0x03, 0x2013 },
-+ { "K2013080.mem", 0x0015, 0x02, 0x2013 },
-+};
-+
-+static const struct renesas_fw_entry *renesas_needs_fw_dl(struct pci_dev *dev)
-+{
-+ const struct renesas_fw_entry *entry;
-+ size_t i;
-+
-+ /* This loader will only work with a RENESAS device. */
-+ if (!(dev->vendor == PCI_VENDOR_ID_RENESAS))
-+ return NULL;
-+
-+ for (i = 0; i < ARRAY_SIZE(renesas_fw_table); i++) {
-+ entry = &renesas_fw_table[i];
-+ if (entry->device == dev->device &&
-+ entry->revision == dev->revision)
-+ return entry;
-+ }
-+
-+ return NULL;
-+}
-+
-+static int renesas_fw_download_image(struct pci_dev *dev,
-+ const u32 *fw,
-+ size_t step)
-+{
-+ size_t i;
-+ int err;
-+ u8 fw_status;
-+ bool data0_or_data1;
-+
-+ /*
-+ * The hardware does alternate between two 32-bit pages.
-+ * (This is because each row of the firmware is 8 bytes).
-+ *
-+ * for even steps we use DATA0, for odd steps DATA1.
-+ */
-+ data0_or_data1 = (step & 1) == 1;
-+
-+ /* step+1. Read "Set DATAX" and confirm it is cleared. */
-+ for (i = 0; i < 10000; i++) {
-+ err = pci_read_config_byte(dev, 0xF5, &fw_status);
-+ if (err)
-+ return pcibios_err_to_errno(err);
-+ if (!(fw_status & BIT(data0_or_data1)))
-+ break;
-+
-+ udelay(1);
-+ }
-+ if (i == 10000)
-+ return -ETIMEDOUT;
-+
-+ /*
-+ * step+2. Write FW data to "DATAX".
-+ * "LSB is left" => force little endian
-+ */
-+ err = pci_write_config_dword(dev, data0_or_data1 ? 0xFC : 0xF8,
-+ (__force u32) cpu_to_le32(fw[step]));
-+ if (err)
-+ return pcibios_err_to_errno(err);
-+
-+ udelay(100);
-+
-+ /* step+3. Set "Set DATAX". */
-+ err = pci_write_config_byte(dev, 0xF5, BIT(data0_or_data1));
-+ if (err)
-+ return pcibios_err_to_errno(err);
-+
-+ return 0;
-+}
-+
-+static int renesas_fw_verify(struct pci_dev *dev,
-+ const void *fw_data,
-+ size_t length)
-+{
-+ const struct renesas_fw_entry *entry = renesas_needs_fw_dl(dev);
-+ u16 fw_version_pointer;
-+ u16 fw_version;
-+
-+ if (!entry)
-+ return -EINVAL;
-+
-+ /*
-+ * The Firmware's Data Format is describe in
-+ * "6.3 Data Format" R19UH0078EJ0500 Rev.5.00 page 124
-+ */
-+
-+ /* "Each row is 8 bytes". => firmware size must be a multiple of 8. */
-+ if (length % 8 != 0) {
-+ dev_err(&dev->dev, "firmware size is not a multipe of 8.");
-+ return -EINVAL;
-+ }
-+
-+ /*
-+ * The bootrom chips of the big brother have sizes up to 64k, let's
-+ * assume that's the biggest the firmware can get.
-+ */
-+ if (length < 0x1000 || length >= 0x10000) {
-+ dev_err(&dev->dev, "firmware is size %zd is not (4k - 64k).",
-+ length);
-+ return -EINVAL;
-+ }
-+
-+ /* The First 2 bytes are fixed value (55aa). "LSB on Left" */
-+ if (get_unaligned_le16(fw_data) != 0x55aa) {
-+ dev_err(&dev->dev, "no valid firmware header found.");
-+ return -EINVAL;
-+ }
-+
-+ /* verify the firmware version position and print it. */
-+ fw_version_pointer = get_unaligned_le16(fw_data + 4);
-+ if (fw_version_pointer + 2 >= length) {
-+ dev_err(&dev->dev, "firmware version pointer is outside of the firmware image.");
-+ return -EINVAL;
-+ }
-+
-+ fw_version = get_unaligned_le16(fw_data + fw_version_pointer);
-+ dev_dbg(&dev->dev, "got firmware version: %02x.", fw_version);
-+
-+ if (fw_version != entry->expected_version) {
-+ dev_err(&dev->dev, "firmware version mismatch, expected version: %02x.",
-+ entry->expected_version);
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+static int renesas_fw_check_running(struct pci_dev *pdev)
-+{
-+ int err;
-+ u8 fw_state;
-+
-+ /*
-+ * Test if the device is actually needing the firmware. As most
-+ * BIOSes will initialize the device for us. If the device is
-+ * initialized.
-+ */
-+ err = pci_read_config_byte(pdev, 0xF4, &fw_state);
-+ if (err)
-+ return pcibios_err_to_errno(err);
-+
-+ /*
-+ * Check if "FW Download Lock" is locked. If it is and the FW is
-+ * ready we can simply continue. If the FW is not ready, we have
-+ * to give up.
-+ */
-+ if (fw_state & BIT(1)) {
-+ dev_dbg(&pdev->dev, "FW Download Lock is engaged.");
-+
-+ if (fw_state & BIT(4))
-+ return 0;
-+
-+ dev_err(&pdev->dev, "FW Download Lock is set and FW is not ready. Giving Up.");
-+ return -EIO;
-+ }
-+
-+ /*
-+ * Check if "FW Download Enable" is set. If someone (us?) tampered
-+ * with it and it can't be resetted, we have to give up too... and
-+ * ask for a forgiveness and a reboot.
-+ */
-+ if (fw_state & BIT(0)) {
-+ dev_err(&pdev->dev, "FW Download Enable is stale. Giving Up (poweroff/reboot needed).");
-+ return -EIO;
-+ }
-+
-+ /* Otherwise, Check the "Result Code" Bits (6:4) and act accordingly */
-+ switch ((fw_state & 0x70)) {
-+ case 0: /* No result yet */
-+ dev_dbg(&pdev->dev, "FW is not ready/loaded yet.");
-+
-+ /* tell the caller, that this device needs the firmware. */
-+ return 1;
-+
-+ case BIT(4): /* Success, device should be working. */
-+ dev_dbg(&pdev->dev, "FW is ready.");
-+ return 0;
-+
-+ case BIT(5): /* Error State */
-+ dev_err(&pdev->dev, "hardware is in an error state. Giving up (poweroff/reboot needed).");
-+ return -ENODEV;
-+
-+ default: /* All other states are marked as "Reserved states" */
-+ dev_err(&pdev->dev, "hardware is in an invalid state %x. Giving up (poweroff/reboot needed).",
-+ (fw_state & 0x70) >> 4);
-+ return -EINVAL;
-+ }
-+}
-+
-+static int renesas_hw_check_run_stop_busy(struct pci_dev *pdev)
-+{
-+#if 0
-+ u32 val;
-+
-+ /*
-+ * 7.1.3 Note 3: "... must not set 'FW Download Enable' when
-+ * 'RUN/STOP' of USBCMD Register is set"
-+ */
-+ val = readl(hcd->regs + 0x20);
-+ if (val & BIT(0)) {
-+ dev_err(&pdev->dev, "hardware is busy and can't receive a FW.");
-+ return -EBUSY;
-+ }
-+#endif
-+ return 0;
-+}
-+
-+static int renesas_fw_download(struct pci_dev *pdev,
-+ const struct firmware *fw, unsigned int retry_counter)
-+{
-+ const u32 *fw_data = (const u32 *) fw->data;
-+ size_t i;
-+ int err;
-+ u8 fw_status;
-+
-+ /*
-+ * For more information and the big picture: please look at the
-+ * "Firmware Download Sequence" in "7.1 FW Download Interface"
-+ * of R19UH0078EJ0500 Rev.5.00 page 131
-+ */
-+ err = renesas_hw_check_run_stop_busy(pdev);
-+ if (err)
-+ return err;
-+
-+ /*
-+ * 0. Set "FW Download Enable" bit in the
-+ * "FW Download Control & Status Register" at 0xF4
-+ */
-+ err = pci_write_config_byte(pdev, 0xF4, BIT(0));
-+ if (err)
-+ return pcibios_err_to_errno(err);
-+
-+ /* 1 - 10 follow one step after the other. */
-+ for (i = 0; i < fw->size / 4; i++) {
-+ err = renesas_fw_download_image(pdev, fw_data, i);
-+ if (err) {
-+ dev_err(&pdev->dev, "Firmware Download Step %zd failed at position %zd bytes with (%d).",
-+ i, i * 4, err);
-+ return err;
-+ }
-+ }
-+
-+ /*
-+ * This sequence continues until the last data is written to
-+ * "DATA0" or "DATA1". Naturally, we wait until "SET DATA0/1"
-+ * is cleared by the hardware beforehand.
-+ */
-+ for (i = 0; i < 10000; i++) {
-+ err = pci_read_config_byte(pdev, 0xF5, &fw_status);
-+ if (err)
-+ return pcibios_err_to_errno(err);
-+ if (!(fw_status & (BIT(0) | BIT(1))))
-+ break;
-+
-+ udelay(1);
-+ }
-+ if (i == 10000)
-+ dev_warn(&pdev->dev, "Final Firmware Download step timed out.");
-+
-+ /*
-+ * 11. After finishing writing the last data of FW, the
-+ * System Software must clear "FW Download Enable"
-+ */
-+ err = pci_write_config_byte(pdev, 0xF4, 0);
-+ if (err)
-+ return pcibios_err_to_errno(err);
-+
-+ /* 12. Read "Result Code" and confirm it is good. */
-+ for (i = 0; i < 10000; i++) {
-+ err = pci_read_config_byte(pdev, 0xF4, &fw_status);
-+ if (err)
-+ return pcibios_err_to_errno(err);
-+ if (fw_status & BIT(4))
-+ break;
-+
-+ udelay(1);
-+ }
-+ if (i == 10000) {
-+ /* Timed out / Error - let's see if we can fix this */
-+ err = renesas_fw_check_running(pdev);
-+ switch (err) {
-+ case 0: /*
-+ * we shouldn't end up here.
-+ * maybe it took a little bit longer.
-+ * But all should be well?
-+ */
-+ break;
-+
-+ case 1: /* (No result yet? - we can try to retry) */
-+ if (retry_counter < 10) {
-+ retry_counter++;
-+ dev_warn(&pdev->dev, "Retry Firmware download: %d try.",
-+ retry_counter);
-+ return renesas_fw_download(pdev, fw,
-+ retry_counter);
-+ }
-+ return -ETIMEDOUT;
-+
-+ default:
-+ return err;
-+ }
-+ }
-+ /*
-+ * Optional last step: Engage Firmware Lock
-+ *
-+ * err = pci_write_config_byte(pdev, 0xF4, BIT(2));
-+ * if (err)
-+ * return pcibios_err_to_errno(err);
-+ */
-+
-+ return 0;
-+}
-+
-+struct renesas_fw_ctx {
-+ struct pci_dev *pdev;
-+ const struct pci_device_id *id;
-+ bool resume;
-+};
-+
-+static int xhci_pci_probe(struct pci_dev *pdev,
-+ const struct pci_device_id *id);
-+
-+static void renesas_fw_callback(const struct firmware *fw,
-+ void *context)
-+{
-+ struct renesas_fw_ctx *ctx = context;
-+ struct pci_dev *pdev = ctx->pdev;
-+ struct device *parent = pdev->dev.parent;
-+ int err = -ENOENT;
-+
-+ if (fw) {
-+ err = renesas_fw_verify(pdev, fw->data, fw->size);
-+ if (!err) {
-+ err = renesas_fw_download(pdev, fw, 0);
-+ release_firmware(fw);
-+ if (!err) {
-+ if (ctx->resume)
-+ return;
-+
-+ err = xhci_pci_probe(pdev, ctx->id);
-+ if (!err) {
-+ /* everything worked */
-+ devm_kfree(&pdev->dev, ctx);
-+ return;
-+ }
-+
-+ /* in case of an error - fall through */
-+ } else {
-+ dev_err(&pdev->dev, "firmware failed to download (%d).",
-+ err);
-+ }
-+ }
-+ } else {
-+ dev_err(&pdev->dev, "firmware failed to load (%d).", err);
-+ }
-+
-+ dev_info(&pdev->dev, "Unloading driver");
-+
-+ if (parent)
-+ device_lock(parent);
-+
-+ device_release_driver(&pdev->dev);
-+
-+ if (parent)
-+ device_unlock(parent);
-+
-+ pci_dev_put(pdev);
-+}
-+
-+static int renesas_fw_alive_check(struct pci_dev *pdev)
-+{
-+ const struct renesas_fw_entry *entry;
-+ int err;
-+
-+ /* check if we have a eligible RENESAS' uPD720201/2 w/o FW. */
-+ entry = renesas_needs_fw_dl(pdev);
-+ if (!entry)
-+ return 0;
-+
-+ err = renesas_fw_check_running(pdev);
-+ /* Also go ahead, if the firmware is running */
-+ if (err == 0)
-+ return 0;
-+
-+ /* At this point, we can be sure that the FW isn't ready. */
-+ return err;
-+}
-+
-+static int renesas_fw_download_to_hw(struct pci_dev *pdev,
-+ const struct pci_device_id *id,
-+ bool do_resume)
-+{
-+ const struct renesas_fw_entry *entry;
-+ struct renesas_fw_ctx *ctx;
-+ int err;
-+
-+ /* check if we have a eligible RENESAS' uPD720201/2 w/o FW. */
-+ entry = renesas_needs_fw_dl(pdev);
-+ if (!entry)
-+ return 0;
-+
-+ err = renesas_fw_check_running(pdev);
-+ /* Continue ahead, if the firmware is already running. */
-+ if (err == 0)
-+ return 0;
-+
-+ if (err != 1)
-+ return err;
-+
-+ ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
-+ if (!ctx)
-+ return -ENOMEM;
-+ ctx->pdev = pdev;
-+ ctx->resume = do_resume;
-+ ctx->id = id;
-+
-+ pci_dev_get(pdev);
-+ err = request_firmware_nowait(THIS_MODULE, 1, entry->firmware_name,
-+ &pdev->dev, GFP_KERNEL, ctx, renesas_fw_callback);
-+ if (err) {
-+ pci_dev_put(pdev);
-+ return err;
-+ }
-+
-+ /*
-+ * The renesas_fw_callback() callback will continue the probe
-+ * process, once it aquires the firmware.
-+ */
-+ return 1;
-+}
-+
- /* called during probe() after chip reset completes */
- static int xhci_pci_setup(struct usb_hcd *hcd)
- {
-@@ -309,6 +763,22 @@ static int xhci_pci_probe(struct pci_dev
- struct hc_driver *driver;
- struct usb_hcd *hcd;
-
-+ /*
-+ * Check if this device is a RENESAS uPD720201/2 device.
-+ * Otherwise, we can continue with xhci_pci_probe as usual.
-+ */
-+ retval = renesas_fw_download_to_hw(dev, id, false);
-+ switch (retval) {
-+ case 0:
-+ break;
-+
-+ case 1: /* let it load the firmware and recontinue the probe. */
-+ return 0;
-+
-+ default:
-+ return retval;
-+ }
-+
- driver = (struct hc_driver *)id->driver_data;
-
- /* Prevent runtime suspending between USB-2 and USB-3 initialization */
-@@ -367,6 +837,16 @@ static void xhci_pci_remove(struct pci_d
- {
- struct xhci_hcd *xhci;
-
-+ if (renesas_fw_alive_check(dev)) {
-+ /*
-+ * bail out early, if this was a renesas device w/o FW.
-+ * Else we might hit the NMI watchdog in xhci_handsake
-+ * during xhci_reset as part of the driver's unloading.
-+ * which we forced in the renesas_fw_callback().
-+ */
-+ return;
-+ }
-+
- xhci = hcd_to_xhci(pci_get_drvdata(dev));
- xhci->xhc_state |= XHCI_STATE_REMOVING;
- if (xhci->shared_hcd) {
+++ /dev/null
-From a0dc613140bab907a3d5787a7ae7b0638bf674d0 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Thu, 23 Jun 2016 20:28:20 +0200
-Subject: [PATCH] usb: xhci: force MSI for uPD720201 and
- uPD720202
-
-The APM82181 does not support MSI-X. When probed, it will
-produce a noisy warning.
-
----
- drivers/usb/host/pci-quirks.c | 362 ++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 362 insertions(+)
-
---- a/drivers/usb/host/xhci-pci.c
-+++ b/drivers/usb/host/xhci-pci.c
-@@ -218,6 +218,7 @@ static void xhci_pci_quirks(struct devic
- pdev->device == 0x0015) {
- xhci->quirks |= XHCI_RESET_ON_RESUME;
- xhci->quirks |= XHCI_ZERO_64B_REGS;
-+ xhci->quirks |= XHCI_FORCE_MSI;
- }
- if (pdev->vendor == PCI_VENDOR_ID_VIA)
- xhci->quirks |= XHCI_RESET_ON_RESUME;
---- a/drivers/usb/host/xhci.c
-+++ b/drivers/usb/host/xhci.c
-@@ -422,10 +422,14 @@ static int xhci_try_enable_msi(struct us
- free_irq(hcd->irq, hcd);
- hcd->irq = 0;
-
-- ret = xhci_setup_msix(xhci);
-- if (ret)
-- /* fall back to msi*/
-+ if (xhci->quirks & XHCI_FORCE_MSI) {
- ret = xhci_setup_msi(xhci);
-+ } else {
-+ ret = xhci_setup_msix(xhci);
-+ if (ret)
-+ /* fall back to msi*/
-+ ret = xhci_setup_msi(xhci);
-+ }
-
- if (!ret) {
- hcd->msi_enabled = 1;
---- a/drivers/usb/host/xhci.h
-+++ b/drivers/usb/host/xhci.h
-@@ -1883,6 +1883,7 @@ struct xhci_hcd {
- /* support xHCI 0.96 spec USB2 software LPM */
- unsigned sw_lpm_support:1;
- /* support xHCI 1.0 spec USB2 hardware LPM */
-+#define XHCI_FORCE_MSI (1 << 24)
- unsigned hw_lpm_support:1;
- /* Broken Suspend flag for SNPS Suspend resume issue */
- unsigned broken_suspend:1;
+++ /dev/null
-From 694f9bfb8efaef8a33e8992015ff9d0866faf4a2 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sun, 17 Dec 2017 17:27:15 +0100
-Subject: [PATCH 1/2] hwmon: tc654 add detection routine
-
-This patch adds a detection routine for the TC654/TC655
-chips. Both IDs are listed in the Datasheet.
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
----
- drivers/hwmon/tc654.c | 29 +++++++++++++++++++++++++++++
- 1 file changed, 29 insertions(+)
-
---- a/drivers/hwmon/tc654.c
-+++ b/drivers/hwmon/tc654.c
-@@ -64,6 +64,11 @@ enum tc654_regs {
- /* Register data is read (and cached) at most once per second. */
- #define TC654_UPDATE_INTERVAL HZ
-
-+/* Manufacturer and Version Identification Register Values */
-+#define TC654_MFR_ID_MICROCHIP 0x84
-+#define TC654_VER_ID 0x00
-+#define TC655_VER_ID 0x01
-+
- struct tc654_data {
- struct i2c_client *client;
-
-@@ -497,6 +502,29 @@ static const struct i2c_device_id tc654_
- {}
- };
-
-+static int
-+tc654_detect(struct i2c_client *new_client, struct i2c_board_info *info)
-+{
-+ struct i2c_adapter *adapter = new_client->adapter;
-+ int manufacturer, product;
-+
-+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-+ return -ENODEV;
-+
-+ manufacturer = i2c_smbus_read_byte_data(new_client, TC654_REG_MFR_ID);
-+ if (manufacturer != TC654_MFR_ID_MICROCHIP)
-+ return -ENODEV;
-+
-+ product = i2c_smbus_read_byte_data(new_client, TC654_REG_VER_ID);
-+ if (!((product == TC654_VER_ID) || (product == TC655_VER_ID)))
-+ return -ENODEV;
-+
-+ strlcpy(info->type, product == TC654_VER_ID ? "tc654" : "tc655",
-+ I2C_NAME_SIZE);
-+ return 0;
-+}
-+
-+
- MODULE_DEVICE_TABLE(i2c, tc654_id);
-
- static struct i2c_driver tc654_driver = {
-@@ -505,6 +533,7 @@ static struct i2c_driver tc654_driver =
- },
- .probe = tc654_probe,
- .id_table = tc654_id,
-+ .detect = tc654_detect,
- };
-
- module_i2c_driver(tc654_driver);
+++ /dev/null
-From 15ae701189744d321d3a1264ff46f8871e8765ee Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sun, 17 Dec 2017 17:29:13 +0100
-Subject: [PATCH] hwmon: tc654: add thermal_cooling device
-
-This patch adds a thermaL_cooling device to the tc654 driver.
-This allows the chip to be used for DT-based cooling.
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
----
- drivers/hwmon/tc654.c | 103 +++++++++++++++++++++++++++++++++++++++++---------
- 1 file changed, 86 insertions(+), 17 deletions(-)
-
---- a/drivers/hwmon/tc654.c
-+++ b/drivers/hwmon/tc654.c
-@@ -24,6 +24,7 @@
- #include <linux/module.h>
- #include <linux/mutex.h>
- #include <linux/slab.h>
-+#include <linux/thermal.h>
- #include <linux/util_macros.h>
-
- enum tc654_regs {
-@@ -141,6 +142,9 @@ struct tc654_data {
- * writable register used to control the duty
- * cycle of the V OUT output.
- */
-+
-+ /* optional cooling device */
-+ struct thermal_cooling_device *cdev;
- };
-
- /* helper to grab and cache data, at most one time per second */
-@@ -376,36 +380,30 @@ static ssize_t set_pwm_mode(struct devic
- static const int tc654_pwm_map[16] = { 77, 88, 102, 112, 124, 136, 148, 160,
- 172, 184, 196, 207, 219, 231, 243, 255};
-
-+static int get_pwm(struct tc654_data *data)
-+{
-+ if (data->config & TC654_REG_CONFIG_SDM)
-+ return 0;
-+ else
-+ return tc654_pwm_map[data->duty_cycle];
-+}
-+
- static ssize_t show_pwm(struct device *dev, struct device_attribute *da,
- char *buf)
- {
- struct tc654_data *data = tc654_update_client(dev);
-- int pwm;
-
- if (IS_ERR(data))
- return PTR_ERR(data);
-
-- if (data->config & TC654_REG_CONFIG_SDM)
-- pwm = 0;
-- else
-- pwm = tc654_pwm_map[data->duty_cycle];
--
-- return sprintf(buf, "%d\n", pwm);
-+ return sprintf(buf, "%d\n", get_pwm(data));
- }
-
--static ssize_t set_pwm(struct device *dev, struct device_attribute *da,
-- const char *buf, size_t count)
-+static int _set_pwm(struct tc654_data *data, unsigned long val)
- {
-- struct tc654_data *data = dev_get_drvdata(dev);
- struct i2c_client *client = data->client;
-- unsigned long val;
- int ret;
-
-- if (kstrtoul(buf, 10, &val))
-- return -EINVAL;
-- if (val > 255)
-- return -EINVAL;
--
- mutex_lock(&data->update_lock);
-
- if (val == 0)
-@@ -425,6 +423,22 @@ static ssize_t set_pwm(struct device *de
-
- out:
- mutex_unlock(&data->update_lock);
-+ return ret;
-+}
-+
-+static ssize_t set_pwm(struct device *dev, struct device_attribute *da,
-+ const char *buf, size_t count)
-+{
-+ struct tc654_data *data = dev_get_drvdata(dev);
-+ unsigned long val;
-+ int ret;
-+
-+ if (kstrtoul(buf, 10, &val))
-+ return -EINVAL;
-+ if (val > 255)
-+ return -EINVAL;
-+
-+ ret = _set_pwm(data, val);
- return ret < 0 ? ret : count;
- }
-
-@@ -462,6 +476,47 @@ static struct attribute *tc654_attrs[] =
-
- ATTRIBUTE_GROUPS(tc654);
-
-+/* cooling device */
-+
-+static int tc654_get_max_state(struct thermal_cooling_device *cdev,
-+ unsigned long *state)
-+{
-+ *state = 255;
-+ return 0;
-+}
-+
-+static int tc654_get_cur_state(struct thermal_cooling_device *cdev,
-+ unsigned long *state)
-+{
-+ struct tc654_data *data = tc654_update_client(cdev->devdata);
-+
-+ if (IS_ERR(data))
-+ return PTR_ERR(data);
-+
-+ *state = get_pwm(data);
-+ return 0;
-+}
-+
-+static int tc654_set_cur_state(struct thermal_cooling_device *cdev,
-+ unsigned long state)
-+{
-+ struct tc654_data *data = tc654_update_client(cdev->devdata);
-+
-+ if (IS_ERR(data))
-+ return PTR_ERR(data);
-+
-+ if (state > 255)
-+ return -EINVAL;
-+
-+ return _set_pwm(data, state);
-+}
-+
-+static const struct thermal_cooling_device_ops tc654_fan_cool_ops = {
-+ .get_max_state = tc654_get_max_state,
-+ .get_cur_state = tc654_get_cur_state,
-+ .set_cur_state = tc654_set_cur_state,
-+};
-+
- /*
- * device probe and removal
- */
-@@ -493,7 +548,21 @@ static int tc654_probe(struct i2c_client
- hwmon_dev =
- devm_hwmon_device_register_with_groups(dev, client->name, data,
- tc654_groups);
-- return PTR_ERR_OR_ZERO(hwmon_dev);
-+ if (IS_ERR(hwmon_dev))
-+ return PTR_ERR(hwmon_dev);
-+
-+#if IS_ENABLED(CONFIG_OF)
-+ /* Optional cooling device register for Device tree platforms */
-+ data->cdev = thermal_of_cooling_device_register(client->dev.of_node,
-+ "tc654", hwmon_dev,
-+ &tc654_fan_cool_ops);
-+#else /* CONFIG_OF */
-+ /* Optional cooling device register for non Device tree platforms */
-+ data->cdev = thermal_cooling_device_register("tc654", hwmon_dev,
-+ &tc654_fan_cool_ops);
-+#endif /* CONFIG_OF */
-+
-+ return PTR_ERR_OR_ZERO(data->cdev);
- }
-
- static const struct i2c_device_id tc654_id[] = {
+++ /dev/null
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_ARCH_AXXIA is not set
-CONFIG_ARCH_HAS_PHYS_TO_DMA=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_VIRT=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARM=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_GIC_V3_ITS=y
-CONFIG_ARM_GIC_V3_ITS_PCI=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_HEAVY_MB=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_ARM_LPAE=y
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_PSCI=y
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_CACHE_L2X0=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_HAS_ASID=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_SPECTRE=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-# CONFIG_DEBUG_USER is not set
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_HAVE_ARM_ARCH_TIMER=y
-CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_SMP=y
-# CONFIG_HUGETLBFS is not set
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_NEON=y
-CONFIG_NR_CPUS=4
-CONFIG_OLD_SIGACTION=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PCI_V3_SEMI is not set
-CONFIG_PERF_USE_VMALLOC=y
-# CONFIG_PL310_ERRATA_588369 is not set
-# CONFIG_PL310_ERRATA_727915 is not set
-# CONFIG_PL310_ERRATA_753970 is not set
-# CONFIG_PL310_ERRATA_769419 is not set
-CONFIG_RTC_MC146818_LIB=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_THUMB2_KERNEL is not set
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_USE_OF=y
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
+++ /dev/null
-CONFIG_64BIT=y
-CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
-CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
-CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
-CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
-CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
-CONFIG_ARCH_INLINE_READ_LOCK=y
-CONFIG_ARCH_INLINE_READ_LOCK_BH=y
-CONFIG_ARCH_INLINE_READ_LOCK_IRQ=y
-CONFIG_ARCH_INLINE_READ_LOCK_IRQSAVE=y
-CONFIG_ARCH_INLINE_READ_UNLOCK=y
-CONFIG_ARCH_INLINE_READ_UNLOCK_BH=y
-CONFIG_ARCH_INLINE_READ_UNLOCK_IRQ=y
-CONFIG_ARCH_INLINE_READ_UNLOCK_IRQRESTORE=y
-CONFIG_ARCH_INLINE_SPIN_LOCK=y
-CONFIG_ARCH_INLINE_SPIN_LOCK_BH=y
-CONFIG_ARCH_INLINE_SPIN_LOCK_IRQ=y
-CONFIG_ARCH_INLINE_SPIN_LOCK_IRQSAVE=y
-CONFIG_ARCH_INLINE_SPIN_TRYLOCK=y
-CONFIG_ARCH_INLINE_SPIN_TRYLOCK_BH=y
-CONFIG_ARCH_INLINE_SPIN_UNLOCK=y
-CONFIG_ARCH_INLINE_SPIN_UNLOCK_BH=y
-CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQ=y
-CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE=y
-CONFIG_ARCH_INLINE_WRITE_LOCK=y
-CONFIG_ARCH_INLINE_WRITE_LOCK_BH=y
-CONFIG_ARCH_INLINE_WRITE_LOCK_IRQ=y
-CONFIG_ARCH_INLINE_WRITE_LOCK_IRQSAVE=y
-CONFIG_ARCH_INLINE_WRITE_UNLOCK=y
-CONFIG_ARCH_INLINE_WRITE_UNLOCK_BH=y
-CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQ=y
-CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE=y
-CONFIG_ARCH_MMAP_RND_BITS=18
-CONFIG_ARCH_MMAP_RND_BITS_MAX=24
-CONFIG_ARCH_MMAP_RND_BITS_MIN=18
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_ARCH_SUPPORTS_INT128=y
-CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
-CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
-CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
-CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
-CONFIG_ARCH_VEXPRESS=y
-CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WANT_FRAME_POINTERS=y
-CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
-CONFIG_ARM64=y
-# CONFIG_ARM64_16K_PAGES is not set
-CONFIG_ARM64_4K_PAGES=y
-# CONFIG_ARM64_64K_PAGES is not set
-CONFIG_ARM64_CONT_SHIFT=4
-CONFIG_ARM64_CRYPTO=y
-CONFIG_ARM64_ERRATUM_819472=y
-CONFIG_ARM64_ERRATUM_824069=y
-CONFIG_ARM64_ERRATUM_826319=y
-CONFIG_ARM64_ERRATUM_827319=y
-CONFIG_ARM64_ERRATUM_832075=y
-CONFIG_ARM64_ERRATUM_843419=y
-CONFIG_ARM64_HW_AFDBM=y
-# CONFIG_ARM64_LSE_ATOMICS is not set
-CONFIG_ARM64_MODULE_PLTS=y
-CONFIG_ARM64_PAGE_SHIFT=12
-CONFIG_ARM64_PAN=y
-CONFIG_ARM64_PA_BITS=48
-CONFIG_ARM64_PA_BITS_48=y
-# CONFIG_ARM64_PMEM is not set
-# CONFIG_ARM64_PTDUMP_DEBUGFS is not set
-# CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET is not set
-CONFIG_ARM64_SSBD=y
-CONFIG_ARM64_SVE=y
-CONFIG_ARM64_UAO=y
-CONFIG_ARM64_VA_BITS=39
-CONFIG_ARM64_VA_BITS_39=y
-# CONFIG_ARM64_VA_BITS_48 is not set
-CONFIG_ARM64_VHE=y
-CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y
-CONFIG_ARM_GIC_V3_ITS=y
-CONFIG_ARM_GIC_V3_ITS_PCI=y
-CONFIG_ATOMIC64_SELFTEST=y
-CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLKSRC_VERSATILE=y
-CONFIG_CLK_SP810=y
-CONFIG_CLK_VEXPRESS_OSC=y
-CONFIG_COMMON_CLK_VERSATILE=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_IDLE=y
-# CONFIG_CPU_IDLE_GOV_LADDER is not set
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CPU_PM=y
-CONFIG_CRYPTO_AES_ARM64=y
-CONFIG_CRYPTO_AES_ARM64_BS=y
-CONFIG_CRYPTO_AES_ARM64_CE=y
-CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
-CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
-CONFIG_CRYPTO_AES_ARM64_NEON_BLK=y
-CONFIG_CRYPTO_CHACHA20=y
-CONFIG_CRYPTO_CHACHA20_NEON=y
-CONFIG_CRYPTO_CRC32_ARM64_CE=y
-CONFIG_CRYPTO_CRYPTD=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_GHASH_ARM64_CE=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA1_ARM64_CE=y
-CONFIG_CRYPTO_SHA256_ARM64=y
-CONFIG_CRYPTO_SHA2_ARM64_CE=y
-# CONFIG_CRYPTO_SHA3_ARM64 is not set
-CONFIG_CRYPTO_SHA512_ARM64=y
-# CONFIG_CRYPTO_SHA512_ARM64_CE is not set
-CONFIG_CRYPTO_SIMD=y
-# CONFIG_CRYPTO_SM3_ARM64_CE is not set
-# CONFIG_CRYPTO_SM4_ARM64_CE is not set
-CONFIG_DMA_DIRECT_OPS=y
-CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_DRM=y
-CONFIG_DRM_BOCHS=y
-CONFIG_DRM_BRIDGE=y
-CONFIG_DRM_KMS_HELPER=y
-CONFIG_DRM_PANEL=y
-CONFIG_DRM_PANEL_BRIDGE=y
-CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
-# CONFIG_DRM_PANEL_SIMPLE is not set
-CONFIG_DRM_QXL=y
-CONFIG_DRM_TTM=y
-CONFIG_DRM_VIRTIO_GPU=y
-CONFIG_FB=y
-CONFIG_FB_ARMCLCD=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_CMDLINE=y
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_FSL_ERRATUM_A008585=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
-CONFIG_HAVE_ARCH_HUGE_VMAP=y
-CONFIG_HAVE_ARCH_KASAN=y
-CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
-CONFIG_HAVE_ARCH_VMAP_STACK=y
-CONFIG_HAVE_CMPXCHG_DOUBLE=y
-CONFIG_HAVE_CMPXCHG_LOCAL=y
-CONFIG_HAVE_DEBUG_BUGVERBOSE=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_HAVE_PATA_PLATFORM=y
-CONFIG_HDMI=y
-CONFIG_HOLES_IN_ZONE=y
-# CONFIG_HUGETLBFS is not set
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_VIRTIO=y
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_INLINE_READ_LOCK=y
-CONFIG_INLINE_READ_LOCK_BH=y
-CONFIG_INLINE_READ_LOCK_IRQ=y
-CONFIG_INLINE_READ_LOCK_IRQSAVE=y
-CONFIG_INLINE_READ_UNLOCK_BH=y
-CONFIG_INLINE_READ_UNLOCK_IRQRESTORE=y
-CONFIG_INLINE_SPIN_LOCK=y
-CONFIG_INLINE_SPIN_LOCK_BH=y
-CONFIG_INLINE_SPIN_LOCK_IRQ=y
-CONFIG_INLINE_SPIN_LOCK_IRQSAVE=y
-CONFIG_INLINE_SPIN_TRYLOCK=y
-CONFIG_INLINE_SPIN_TRYLOCK_BH=y
-CONFIG_INLINE_SPIN_UNLOCK_BH=y
-CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE=y
-CONFIG_INLINE_WRITE_LOCK=y
-CONFIG_INLINE_WRITE_LOCK_BH=y
-CONFIG_INLINE_WRITE_LOCK_IRQ=y
-CONFIG_INLINE_WRITE_LOCK_IRQSAVE=y
-CONFIG_INLINE_WRITE_UNLOCK_BH=y
-CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE=y
-CONFIG_LCD_CLASS_DEVICE=m
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_MFD_CORE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MFD_VEXPRESS_SYSREG=y
-CONFIG_MMC=y
-CONFIG_MMC_ARMMMCI=y
-# CONFIG_MMC_TIFM_SD is not set
-CONFIG_MODULES_USE_ELF_RELA=y
-# CONFIG_MTD_PHYSMAP_OF is not set
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_NO_HZ=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=64
-# CONFIG_NUMA is not set
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_GENERIC_DOMAINS=y
-CONFIG_PM_GENERIC_DOMAINS_OF=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_VEXPRESS=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-# CONFIG_RANDOMIZE_BASE is not set
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_SMC91X=y
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SYNC_FILE=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_UNMAP_KERNEL_AT_EL0=y
-CONFIG_VEXPRESS_CONFIG=y
-CONFIG_VEXPRESS_SYSCFG=y
-CONFIG_VIDEOMODE_HELPERS=y
-CONFIG_VMAP_STACK=y
-CONFIG_ZONE_DMA32=y
+++ /dev/null
-CONFIG_9P_FS=y
-# CONFIG_9P_FS_POSIX_ACL is not set
-# CONFIG_9P_FS_SECURITY is not set
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_KCOV=y
-CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
-CONFIG_ARCH_HAS_PTE_SPECIAL=y
-CONFIG_ARCH_HAS_SET_MEMORY=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
-CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GIC_V2M=y
-CONFIG_ARM_GIC_V3=y
-CONFIG_ARM_PSCI_FW=y
-# CONFIG_ARM_SP805_WATCHDOG is not set
-CONFIG_BALLOON_COMPACTION=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_MQ_VIRTIO=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
-CONFIG_CPU_RMAP=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DTC=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EXT4_FS=y
-CONFIG_F2FS_FS=y
-CONFIG_FAILOVER=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FRAME_POINTER=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_PL061=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_BITREVERSE=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
-CONFIG_HAVE_ARM_SMCCC=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_EBPF_JIT=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_GUP=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_RCU_TABLE_FREE=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_RSEQ=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HVC_DRIVER=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IOMMU_HELPER=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_MEMORY_BALLOON=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MIGRATION=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NET_9P=y
-# CONFIG_NET_9P_DEBUG is not set
-CONFIG_NET_9P_VIRTIO=y
-CONFIG_NET_FAILOVER=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_NET=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_PADATA=y
-CONFIG_PARTITION_PERCPU=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_ECAM=y
-CONFIG_PCI_HOST_COMMON=y
-CONFIG_PCI_HOST_GENERIC=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_RATIONAL=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_RCU_NEED_SEGCBLIST=y
-CONFIG_REFCOUNT_FULL=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PL031=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_SCHED_INFO is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_VIRTIO=y
-CONFIG_SERIAL_8250_FSL=y
-# CONFIG_SERIAL_AMBA_PL010 is not set
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SG_POOL=y
-CONFIG_SMP=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SRCU=y
-CONFIG_SWIOTLB=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_USB_SUPPORT=y
-CONFIG_VIRTIO=y
-CONFIG_VIRTIO_BALLOON=y
-CONFIG_VIRTIO_BLK=y
-CONFIG_VIRTIO_CONSOLE=y
-CONFIG_VIRTIO_MMIO=y
-# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
-CONFIG_VIRTIO_NET=y
-CONFIG_VIRTIO_PCI=y
-CONFIG_VIRTIO_PCI_LEGACY=y
-CONFIG_XPS=y
+++ /dev/null
-CONFIG_AG71XX=y
-# CONFIG_AG71XX_DEBUG is not set
-CONFIG_AG71XX_DEBUG_FS=y
-CONFIG_AR8216_PHY=y
-CONFIG_AR8216_PHY_LEDS=y
-CONFIG_ARCH_BINFMT_ELF_STATE=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_RESET_CONTROLLER=y
-CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MMAP_RND_BITS_MAX=15
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
-CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_AT803X_PHY=y
-CONFIG_ATH79=y
-CONFIG_ATH79_WDT=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_COMMON_CLK=y
-# CONFIG_COMMON_CLK_BOSTON is not set
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_RIXI=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R2=y
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CPU_SUPPORTS_MSA=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_DIRECT_OPS=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NONCOHERENT_CACHE_SYNC=y
-CONFIG_DMA_NONCOHERENT_MMAP=y
-CONFIG_DMA_NONCOHERENT_OPS=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_ETHERNET_PACKET_MANGLE=y
-CONFIG_FIXED_PHY=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_LIB_ASHLDI3=y
-CONFIG_GENERIC_LIB_ASHRDI3=y
-CONFIG_GENERIC_LIB_CMPDI2=y
-CONFIG_GENERIC_LIB_LSHRDI3=y
-CONFIG_GENERIC_LIB_UCMPDI2=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_74X164=y
-CONFIG_GPIO_ATH79=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_ARCH_COMPILER_H=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_CBPF_JIT=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_COPY_THREAD_TLS=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KVM=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_RSEQ=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-CONFIG_LEDS_GPIO=y
-# CONFIG_LEDS_RESET is not set
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_MDIO_BITBANG=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_GPIO=y
-CONFIG_MEMFD_CREATE=y
-# CONFIG_MFD_RB4XX_CPLD is not set
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGRATION=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CBPF_JIT=y
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
-# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_MIPS_CMDLINE_FROM_DTB=y
-# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_NO_APPENDED_DTB is not set
-CONFIG_MIPS_RAW_APPENDED_DTB=y
-CONFIG_MIPS_SPRAM=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_M25P80=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-CONFIG_MTD_PARSER_CYBERTAN=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_ELF_FW=y
-CONFIG_MTD_SPLIT_LZMA_FW=y
-CONFIG_MTD_SPLIT_SEAMA_FW=y
-CONFIG_MTD_SPLIT_TPLINK_FW=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_MTD_SPLIT_WRGG_FW=y
-CONFIG_MTD_VIRT_CONCAT=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_PCI=y
-CONFIG_PCI_AR71XX=y
-CONFIG_PCI_AR724X=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DRIVERS_LEGACY=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-# CONFIG_PHY_AR7100_USB is not set
-# CONFIG_PHY_AR7200_USB is not set
-# CONFIG_PHY_ATH79_USB is not set
-CONFIG_PINCTRL=y
-CONFIG_RATIONAL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_RESET_ATH79=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-CONFIG_SERIAL_AR933X=y
-CONFIG_SERIAL_AR933X_CONSOLE=y
-CONFIG_SERIAL_AR933X_NR_UARTS=2
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SPI=y
-CONFIG_SPI_AR934X=y
-CONFIG_SPI_ATH79=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-# CONFIG_SPI_RB4XX is not set
-CONFIG_SRCU=y
-CONFIG_SWCONFIG=y
-CONFIG_SWCONFIG_LEDS=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_SYS_SUPPORTS_ZBOOT_UART_PROM=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TINY_SRCU=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
+++ /dev/null
-From 5f5c9858af167f842ee8df053920b98387a71af1 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Mon, 5 Mar 2018 11:41:25 +0100
-Subject: [PATCH 02/27] watchdog: ath79: fix maximum timeout
-
-If the userland tries to set a timeout higher than the max_timeout,
-then we should fallback to max_timeout.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/watchdog/ath79_wdt.c | 8 ++++++--
- 1 file changed, 6 insertions(+), 2 deletions(-)
-
---- a/drivers/watchdog/ath79_wdt.c
-+++ b/drivers/watchdog/ath79_wdt.c
-@@ -115,10 +115,14 @@ static inline void ath79_wdt_disable(voi
-
- static int ath79_wdt_set_timeout(int val)
- {
-- if (val < 1 || val > max_timeout)
-+ if (val < 1)
- return -EINVAL;
-
-- timeout = val;
-+ if (val > max_timeout)
-+ timeout = max_timeout;
-+ else
-+ timeout = val;
-+
- ath79_wdt_keepalive();
-
- return 0;
+++ /dev/null
-From ecbd9c87f073f097d9fe56390353e64e963e866a Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 10:03:03 +0100
-Subject: [PATCH 03/27] leds: add reset-controller based driver
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/leds/Kconfig | 11 ++++
- drivers/leds/Makefile | 1 +
- drivers/leds/leds-reset.c | 137 ++++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 149 insertions(+)
- create mode 100644 drivers/leds/leds-reset.c
-
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -756,6 +756,17 @@ config LEDS_NIC78BX
- To compile this driver as a module, choose M here: the module
- will be called leds-nic78bx.
-
-+config LEDS_RESET
-+ tristate "LED support for reset-controller API"
-+ depends on LEDS_CLASS
-+ depends on RESET_CONTROLLER
-+ help
-+ This option enables support for LEDs connected to pins driven by reset
-+ controllers. Yes, DNI actual built HW like that.
-+
-+ To compile this driver as a module, choose M here: the module
-+ will be called leds-reset.
-+
- comment "LED Triggers"
- source "drivers/leds/trigger/Kconfig"
-
---- /dev/null
-+++ b/drivers/leds/leds-reset.c
-@@ -0,0 +1,140 @@
-+/*
-+ * Copyright (C) 2018 John Crispin <john@phrozen.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+#include <linux/err.h>
-+#include <linux/reset.h>
-+#include <linux/kernel.h>
-+#include <linux/leds.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+#include <linux/reset.h>
-+
-+struct reset_led_data {
-+ struct led_classdev cdev;
-+ struct reset_control *rst;
-+};
-+
-+static inline struct reset_led_data *
-+ cdev_to_reset_led_data(struct led_classdev *led_cdev)
-+{
-+ return container_of(led_cdev, struct reset_led_data, cdev);
-+}
-+
-+static void reset_led_set(struct led_classdev *led_cdev,
-+ enum led_brightness value)
-+{
-+ struct reset_led_data *led_dat = cdev_to_reset_led_data(led_cdev);
-+
-+ if (value == LED_OFF)
-+ reset_control_assert(led_dat->rst);
-+ else
-+ reset_control_deassert(led_dat->rst);
-+}
-+
-+struct reset_leds_priv {
-+ int num_leds;
-+ struct reset_led_data leds[];
-+};
-+
-+static inline int sizeof_reset_leds_priv(int num_leds)
-+{
-+ return sizeof(struct reset_leds_priv) +
-+ (sizeof(struct reset_led_data) * num_leds);
-+}
-+
-+static struct reset_leds_priv *reset_leds_create(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct fwnode_handle *child;
-+ struct reset_leds_priv *priv;
-+ int count, ret;
-+
-+ count = device_get_child_node_count(dev);
-+ if (!count)
-+ return ERR_PTR(-ENODEV);
-+
-+ priv = devm_kzalloc(dev, sizeof_reset_leds_priv(count), GFP_KERNEL);
-+ if (!priv)
-+ return ERR_PTR(-ENOMEM);
-+
-+ device_for_each_child_node(dev, child) {
-+ struct reset_led_data *led = &priv->leds[priv->num_leds];
-+ struct device_node *np = to_of_node(child);
-+
-+ ret = fwnode_property_read_string(child, "label", &led->cdev.name);
-+ if (!led->cdev.name) {
-+ fwnode_handle_put(child);
-+ return ERR_PTR(-EINVAL);
-+ }
-+ led->rst = __of_reset_control_get(np, NULL, 0, 0, 0);
-+ if (IS_ERR(led->rst))
-+ return ERR_PTR(-EINVAL);
-+
-+ fwnode_property_read_string(child, "linux,default-trigger",
-+ &led->cdev.default_trigger);
-+
-+ led->cdev.brightness_set = reset_led_set;
-+ ret = devm_of_led_classdev_register(&pdev->dev, np, &led->cdev);
-+ if (ret < 0)
-+ return ERR_PTR(ret);
-+ led->cdev.dev->of_node = np;
-+ priv->num_leds++;
-+ }
-+
-+ return priv;
-+}
-+
-+static const struct of_device_id of_reset_leds_match[] = {
-+ { .compatible = "reset-leds", },
-+ {},
-+};
-+
-+MODULE_DEVICE_TABLE(of, of_reset_leds_match);
-+
-+static int reset_led_probe(struct platform_device *pdev)
-+{
-+ struct reset_leds_priv *priv;
-+
-+ priv = reset_leds_create(pdev);
-+ if (IS_ERR(priv))
-+ return PTR_ERR(priv);
-+
-+ platform_set_drvdata(pdev, priv);
-+
-+ return 0;
-+}
-+
-+static void reset_led_shutdown(struct platform_device *pdev)
-+{
-+ struct reset_leds_priv *priv = platform_get_drvdata(pdev);
-+ int i;
-+
-+ for (i = 0; i < priv->num_leds; i++) {
-+ struct reset_led_data *led = &priv->leds[i];
-+
-+ if (!(led->cdev.flags & LED_RETAIN_AT_SHUTDOWN))
-+ reset_led_set(&led->cdev, LED_OFF);
-+ }
-+}
-+
-+static struct platform_driver reset_led_driver = {
-+ .probe = reset_led_probe,
-+ .shutdown = reset_led_shutdown,
-+ .driver = {
-+ .name = "leds-reset",
-+ .of_match_table = of_reset_leds_match,
-+ },
-+};
-+
-+module_platform_driver(reset_led_driver);
-+
-+MODULE_AUTHOR("John Crispin <john@phrozen.org>");
-+MODULE_DESCRIPTION("reset controller LED driver");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("platform:leds-reset");
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -78,6 +78,7 @@ obj-$(CONFIG_LEDS_MT6323) += leds-mt632
- obj-$(CONFIG_LEDS_LM3692X) += leds-lm3692x.o
- obj-$(CONFIG_LEDS_SC27XX_BLTC) += leds-sc27xx-bltc.o
- obj-$(CONFIG_LEDS_LM3601X) += leds-lm3601x.o
-+obj-$(CONFIG_LEDS_RESET) += leds-reset.o
-
- # LED SPI Drivers
- obj-$(CONFIG_LEDS_CR0014114) += leds-cr0014114.o
+++ /dev/null
-From 08c9d6ceef01893678a5d2e8a15517c745417f21 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 10:04:05 +0100
-Subject: [PATCH 04/27] phy: add ath79 usb phys
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/phy/Kconfig | 16 ++++++
- drivers/phy/Makefile | 2 +
- drivers/phy/phy-ar7100-usb.c | 124 +++++++++++++++++++++++++++++++++++++++++++
- drivers/phy/phy-ar7200-usb.c | 108 +++++++++++++++++++++++++++++++++++++
- 4 files changed, 250 insertions(+)
- create mode 100644 drivers/phy/phy-ar7100-usb.c
- create mode 100644 drivers/phy/phy-ar7200-usb.c
-
---- a/drivers/phy/Kconfig
-+++ b/drivers/phy/Kconfig
-@@ -15,6 +15,22 @@ config GENERIC_PHY
- phy users can obtain reference to the PHY. All the users of this
- framework should select this config.
-
-+config PHY_AR7100_USB
-+ tristate "Atheros AR7100 USB PHY driver"
-+ depends on ATH79 || COMPILE_TEST
-+ default y if USB_EHCI_HCD_PLATFORM
-+ select PHY_SIMPLE
-+ help
-+ Enable this to support the USB PHY on Atheros AR7100 SoCs.
-+
-+config PHY_AR7200_USB
-+ tristate "Atheros AR7200 USB PHY driver"
-+ depends on ATH79 || COMPILE_TEST
-+ default y if USB_EHCI_HCD_PLATFORM
-+ select PHY_SIMPLE
-+ help
-+ Enable this to support the USB PHY on Atheros AR7200 SoCs.
-+
- config PHY_LPC18XX_USB_OTG
- tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver"
- depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
---- a/drivers/phy/Makefile
-+++ b/drivers/phy/Makefile
-@@ -4,6 +4,8 @@
- #
-
- obj-$(CONFIG_GENERIC_PHY) += phy-core.o
-+obj-$(CONFIG_PHY_AR7100_USB) += phy-ar7100-usb.o
-+obj-$(CONFIG_PHY_AR7200_USB) += phy-ar7200-usb.o
- obj-$(CONFIG_PHY_LPC18XX_USB_OTG) += phy-lpc18xx-usb-otg.o
- obj-$(CONFIG_PHY_XGENE) += phy-xgene.o
- obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o
---- /dev/null
-+++ b/drivers/phy/phy-ar7100-usb.c
-@@ -0,0 +1,140 @@
-+/*
-+ * Copyright (C) 2018 John Crispin <john@phrozen.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/phy/phy.h>
-+#include <linux/delay.h>
-+#include <linux/reset.h>
-+#include <linux/of_gpio.h>
-+
-+#include <asm/mach-ath79/ath79.h>
-+#include <asm/mach-ath79/ar71xx_regs.h>
-+
-+struct ar7100_usb_phy {
-+ struct reset_control *rst_phy;
-+ struct reset_control *rst_host;
-+ struct reset_control *rst_ohci_dll;
-+ void __iomem *io_base;
-+ struct phy *phy;
-+ int gpio;
-+};
-+
-+static int ar7100_usb_phy_power_off(struct phy *phy)
-+{
-+ struct ar7100_usb_phy *priv = phy_get_drvdata(phy);
-+ int err = 0;
-+
-+ err |= reset_control_assert(priv->rst_host);
-+ err |= reset_control_assert(priv->rst_phy);
-+ err |= reset_control_assert(priv->rst_ohci_dll);
-+
-+ return err;
-+}
-+
-+static int ar7100_usb_phy_power_on(struct phy *phy)
-+{
-+ struct ar7100_usb_phy *priv = phy_get_drvdata(phy);
-+ int err = 0;
-+
-+ err |= ar7100_usb_phy_power_off(phy);
-+ mdelay(100);
-+ err |= reset_control_deassert(priv->rst_ohci_dll);
-+ err |= reset_control_deassert(priv->rst_phy);
-+ err |= reset_control_deassert(priv->rst_host);
-+ mdelay(500);
-+ iowrite32(0xf0000, priv->io_base + AR71XX_USB_CTRL_REG_CONFIG);
-+ iowrite32(0x20c00, priv->io_base + AR71XX_USB_CTRL_REG_FLADJ);
-+
-+ return err;
-+}
-+
-+static const struct phy_ops ar7100_usb_phy_ops = {
-+ .power_on = ar7100_usb_phy_power_on,
-+ .power_off = ar7100_usb_phy_power_off,
-+ .owner = THIS_MODULE,
-+};
-+
-+static int ar7100_usb_phy_probe(struct platform_device *pdev)
-+{
-+ struct phy_provider *phy_provider;
-+ struct resource *res;
-+ struct ar7100_usb_phy *priv;
-+
-+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
-+ if (!priv)
-+ return -ENOMEM;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ priv->io_base = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(priv->io_base))
-+ return PTR_ERR(priv->io_base);
-+
-+ priv->rst_phy = devm_reset_control_get(&pdev->dev, "usb-phy");
-+ if (IS_ERR(priv->rst_phy)) {
-+ dev_err(&pdev->dev, "phy reset is missing\n");
-+ return PTR_ERR(priv->rst_phy);
-+ }
-+
-+ priv->rst_host = devm_reset_control_get(&pdev->dev, "usb-host");
-+ if (IS_ERR(priv->rst_host)) {
-+ dev_err(&pdev->dev, "host reset is missing\n");
-+ return PTR_ERR(priv->rst_host);
-+ }
-+
-+ priv->rst_ohci_dll = devm_reset_control_get(&pdev->dev, "usb-ohci-dll");
-+ if (IS_ERR(priv->rst_ohci_dll)) {
-+ dev_err(&pdev->dev, "ohci-dll reset is missing\n");
-+ return PTR_ERR(priv->rst_host);
-+ }
-+
-+ priv->phy = devm_phy_create(&pdev->dev, NULL, &ar7100_usb_phy_ops);
-+ if (IS_ERR(priv->phy)) {
-+ dev_err(&pdev->dev, "failed to create PHY\n");
-+ return PTR_ERR(priv->phy);
-+ }
-+
-+ priv->gpio = of_get_gpio(pdev->dev.of_node, 0);
-+ if (priv->gpio >= 0) {
-+ int ret = devm_gpio_request(&pdev->dev, priv->gpio, dev_name(&pdev->dev));
-+
-+ if (ret) {
-+ dev_err(&pdev->dev, "failed to request gpio\n");
-+ return ret;
-+ }
-+ gpio_export_with_name(priv->gpio, 0, dev_name(&pdev->dev));
-+ gpio_set_value(priv->gpio, 1);
-+ }
-+
-+ phy_set_drvdata(priv->phy, priv);
-+
-+ phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
-+
-+
-+ return PTR_ERR_OR_ZERO(phy_provider);
-+}
-+
-+static const struct of_device_id ar7100_usb_phy_of_match[] = {
-+ { .compatible = "qca,ar7100-usb-phy" },
-+ {}
-+};
-+MODULE_DEVICE_TABLE(of, ar7100_usb_phy_of_match);
-+
-+static struct platform_driver ar7100_usb_phy_driver = {
-+ .probe = ar7100_usb_phy_probe,
-+ .driver = {
-+ .of_match_table = ar7100_usb_phy_of_match,
-+ .name = "ar7100-usb-phy",
-+ }
-+};
-+module_platform_driver(ar7100_usb_phy_driver);
-+
-+MODULE_DESCRIPTION("ATH79 USB PHY driver");
-+MODULE_AUTHOR("Alban Bedel <albeu@free.fr>");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/drivers/phy/phy-ar7200-usb.c
-@@ -0,0 +1,136 @@
-+/*
-+ * Copyright (C) 2015 Alban Bedel <albeu@free.fr>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/phy/phy.h>
-+#include <linux/reset.h>
-+#include <linux/of_gpio.h>
-+
-+struct ar7200_usb_phy {
-+ struct reset_control *rst_phy;
-+ struct reset_control *rst_phy_analog;
-+ struct reset_control *suspend_override;
-+ struct phy *phy;
-+ int gpio;
-+};
-+
-+static int ar7200_usb_phy_power_on(struct phy *phy)
-+{
-+ struct ar7200_usb_phy *priv = phy_get_drvdata(phy);
-+ int err = 0;
-+
-+ if (priv->suspend_override)
-+ err = reset_control_assert(priv->suspend_override);
-+ if (priv->rst_phy)
-+ err |= reset_control_deassert(priv->rst_phy);
-+ if (priv->rst_phy_analog)
-+ err |= reset_control_deassert(priv->rst_phy_analog);
-+
-+ return err;
-+}
-+
-+static int ar7200_usb_phy_power_off(struct phy *phy)
-+{
-+ struct ar7200_usb_phy *priv = phy_get_drvdata(phy);
-+ int err = 0;
-+
-+ if (priv->suspend_override)
-+ err = reset_control_deassert(priv->suspend_override);
-+ if (priv->rst_phy)
-+ err |= reset_control_assert(priv->rst_phy);
-+ if (priv->rst_phy_analog)
-+ err |= reset_control_assert(priv->rst_phy_analog);
-+
-+ return err;
-+}
-+
-+static const struct phy_ops ar7200_usb_phy_ops = {
-+ .power_on = ar7200_usb_phy_power_on,
-+ .power_off = ar7200_usb_phy_power_off,
-+ .owner = THIS_MODULE,
-+};
-+
-+static int ar7200_usb_phy_probe(struct platform_device *pdev)
-+{
-+ struct phy_provider *phy_provider;
-+ struct ar7200_usb_phy *priv;
-+
-+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
-+ if (!priv)
-+ return -ENOMEM;
-+
-+ priv->rst_phy = devm_reset_control_get(&pdev->dev, "usb-phy");
-+ if (IS_ERR(priv->rst_phy)) {
-+ if (PTR_ERR(priv->rst_phy) != -EPROBE_DEFER)
-+ dev_err(&pdev->dev, "phy reset is missing\n");
-+ return PTR_ERR(priv->rst_phy);
-+ }
-+
-+ priv->rst_phy_analog = devm_reset_control_get_optional(
-+ &pdev->dev, "usb-phy-analog");
-+ if (IS_ERR(priv->rst_phy_analog)) {
-+ if (PTR_ERR(priv->rst_phy_analog) == -ENOENT)
-+ priv->rst_phy_analog = NULL;
-+ else
-+ return PTR_ERR(priv->rst_phy_analog);
-+ }
-+
-+ priv->suspend_override = devm_reset_control_get_optional(
-+ &pdev->dev, "usb-suspend-override");
-+ if (IS_ERR(priv->suspend_override)) {
-+ if (PTR_ERR(priv->suspend_override) == -ENOENT)
-+ priv->suspend_override = NULL;
-+ else
-+ return PTR_ERR(priv->suspend_override);
-+ }
-+
-+ priv->phy = devm_phy_create(&pdev->dev, NULL, &ar7200_usb_phy_ops);
-+ if (IS_ERR(priv->phy)) {
-+ dev_err(&pdev->dev, "failed to create PHY\n");
-+ return PTR_ERR(priv->phy);
-+ }
-+
-+ priv->gpio = of_get_gpio(pdev->dev.of_node, 0);
-+ if (priv->gpio >= 0) {
-+ int ret = devm_gpio_request(&pdev->dev, priv->gpio, dev_name(&pdev->dev));
-+
-+ if (ret) {
-+ dev_err(&pdev->dev, "failed to request gpio\n");
-+ return ret;
-+ }
-+ gpio_export_with_name(priv->gpio, 0, dev_name(&pdev->dev));
-+ gpio_set_value(priv->gpio, 1);
-+ }
-+
-+ phy_set_drvdata(priv->phy, priv);
-+
-+ phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
-+
-+ return PTR_ERR_OR_ZERO(phy_provider);
-+}
-+
-+static const struct of_device_id ar7200_usb_phy_of_match[] = {
-+ { .compatible = "qca,ar7200-usb-phy" },
-+ {}
-+};
-+MODULE_DEVICE_TABLE(of, ar7200_usb_phy_of_match);
-+
-+static struct platform_driver ar7200_usb_phy_driver = {
-+ .probe = ar7200_usb_phy_probe,
-+ .driver = {
-+ .of_match_table = ar7200_usb_phy_of_match,
-+ .name = "ar7200-usb-phy",
-+ }
-+};
-+module_platform_driver(ar7200_usb_phy_driver);
-+
-+MODULE_DESCRIPTION("ATH79 USB PHY driver");
-+MODULE_AUTHOR("Alban Bedel <albeu@free.fr>");
-+MODULE_LICENSE("GPL");
+++ /dev/null
-From 2201818e5bd33f389beceb3943fdfcf5a698fc5b Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 10:01:43 +0100
-Subject: [PATCH 05/27] usb: add more OF/quirk properties
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/usb/host/ehci-platform.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/drivers/usb/host/ehci-platform.c
-+++ b/drivers/usb/host/ehci-platform.c
-@@ -271,6 +271,11 @@ static int ehci_platform_probe(struct pl
- ehci = hcd_to_ehci(hcd);
-
- if (pdata == &ehci_platform_defaults && dev->dev.of_node) {
-+ of_property_read_u32(dev->dev.of_node, "caps-offset", &pdata->caps_offset);
-+
-+ if (of_property_read_bool(dev->dev.of_node, "has-synopsys-hc-bug"))
-+ pdata->has_synopsys_hc_bug = 1;
-+
- if (of_property_read_bool(dev->dev.of_node, "big-endian-regs"))
- ehci->big_endian_mmio = 1;
-
+++ /dev/null
-From f3eacff2310a60348a755c50a8da6fc251fc8587 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 09:55:13 +0100
-Subject: [PATCH 07/33] irqchip/irq-ath79-intc: add irq cascade driver for
- QCA9556 SoCs
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/irqchip/Makefile | 1 +
- drivers/irqchip/irq-ath79-intc.c | 142 +++++++++++++++++++++++++++++++++++++++
- 2 files changed, 143 insertions(+)
- create mode 100644 drivers/irqchip/irq-ath79-intc.c
-
---- a/drivers/irqchip/Makefile
-+++ b/drivers/irqchip/Makefile
-@@ -3,6 +3,7 @@ obj-$(CONFIG_IRQCHIP) += irqchip.o
-
- obj-$(CONFIG_ALPINE_MSI) += irq-alpine-msi.o
- obj-$(CONFIG_ATH79) += irq-ath79-cpu.o
-+obj-$(CONFIG_ATH79) += irq-ath79-intc.o
- obj-$(CONFIG_ATH79) += irq-ath79-misc.o
- obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2835.o
- obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2836.o
---- /dev/null
-+++ b/drivers/irqchip/irq-ath79-intc.c
-@@ -0,0 +1,142 @@
-+/*
-+ * Atheros AR71xx/AR724x/AR913x specific interrupt handling
-+ *
-+ * Copyright (C) 2018 John Crispin <john@phrozen.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include <linux/interrupt.h>
-+#include <linux/irqchip.h>
-+#include <linux/of.h>
-+#include <linux/of_irq.h>
-+#include <linux/irqdomain.h>
-+
-+#include <asm/irq_cpu.h>
-+#include <asm/mach-ath79/ath79.h>
-+#include <asm/mach-ath79/ar71xx_regs.h>
-+
-+#define ATH79_MAX_INTC_CASCADE 3
-+
-+struct ath79_intc {
-+ struct irq_chip chip;
-+ u32 irq;
-+ u32 pending_mask;
-+ u32 int_status;
-+ u32 irq_mask[ATH79_MAX_INTC_CASCADE];
-+ u32 irq_wb_chan[ATH79_MAX_INTC_CASCADE];
-+};
-+
-+static void ath79_intc_irq_handler(struct irq_desc *desc)
-+{
-+ struct irq_domain *domain = irq_desc_get_handler_data(desc);
-+ struct ath79_intc *intc = domain->host_data;
-+ u32 pending;
-+
-+ pending = ath79_reset_rr(intc->int_status);
-+ pending &= intc->pending_mask;
-+
-+ if (pending) {
-+ int i;
-+
-+ for (i = 0; i < domain->hwirq_max; i++)
-+ if (pending & intc->irq_mask[i]) {
-+ if (intc->irq_wb_chan[i] != 0xffffffff)
-+ ath79_ddr_wb_flush(intc->irq_wb_chan[i]);
-+ generic_handle_irq(irq_find_mapping(domain, i));
-+ }
-+ } else {
-+ spurious_interrupt();
-+ }
-+}
-+
-+static void ath79_intc_irq_enable(struct irq_data *d)
-+{
-+ struct ath79_intc *intc = d->domain->host_data;
-+ enable_irq(intc->irq);
-+}
-+
-+static void ath79_intc_irq_disable(struct irq_data *d)
-+{
-+ struct ath79_intc *intc = d->domain->host_data;
-+ disable_irq(intc->irq);
-+}
-+
-+static int ath79_intc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
-+{
-+ struct ath79_intc *intc = d->host_data;
-+
-+ irq_set_chip_and_handler(irq, &intc->chip, handle_level_irq);
-+
-+ return 0;
-+}
-+
-+static const struct irq_domain_ops ath79_irq_domain_ops = {
-+ .xlate = irq_domain_xlate_onecell,
-+ .map = ath79_intc_map,
-+};
-+
-+static int __init ath79_intc_of_init(
-+ struct device_node *node, struct device_node *parent)
-+{
-+ struct irq_domain *domain;
-+ struct ath79_intc *intc;
-+ int cnt, cntwb, i, err;
-+
-+ cnt = of_property_count_u32_elems(node, "qca,pending-bits");
-+ if (cnt > ATH79_MAX_INTC_CASCADE)
-+ panic("Too many INTC pending bits\n");
-+
-+ intc = kzalloc(sizeof(*intc), GFP_KERNEL);
-+ if (!intc)
-+ panic("Failed to allocate INTC memory\n");
-+ intc->chip = dummy_irq_chip;
-+ intc->chip.name = "INTC";
-+ intc->chip.irq_disable = ath79_intc_irq_disable;
-+ intc->chip.irq_enable = ath79_intc_irq_enable;
-+
-+ if (of_property_read_u32(node, "qca,int-status-addr", &intc->int_status) < 0) {
-+ panic("Missing address of interrupt status register\n");
-+ }
-+
-+ of_property_read_u32_array(node, "qca,pending-bits", intc->irq_mask, cnt);
-+ for (i = 0; i < cnt; i++) {
-+ intc->pending_mask |= intc->irq_mask[i];
-+ intc->irq_wb_chan[i] = 0xffffffff;
-+ }
-+
-+ cntwb = of_count_phandle_with_args(
-+ node, "qca,ddr-wb-channels", "#qca,ddr-wb-channel-cells");
-+
-+ for (i = 0; i < cntwb; i++) {
-+ struct of_phandle_args args;
-+ u32 irq = i;
-+
-+ of_property_read_u32_index(
-+ node, "qca,ddr-wb-channel-interrupts", i, &irq);
-+ if (irq >= ATH79_MAX_INTC_CASCADE)
-+ continue;
-+
-+ err = of_parse_phandle_with_args(
-+ node, "qca,ddr-wb-channels",
-+ "#qca,ddr-wb-channel-cells",
-+ i, &args);
-+ if (err)
-+ return err;
-+
-+ intc->irq_wb_chan[irq] = args.args[0];
-+ }
-+
-+ intc->irq = irq_of_parse_and_map(node, 0);
-+ if (!intc->irq)
-+ panic("Failed to get INTC IRQ");
-+
-+ domain = irq_domain_add_linear(node, cnt, &ath79_irq_domain_ops, intc);
-+ irq_set_chained_handler_and_data(intc->irq, ath79_intc_irq_handler, domain);
-+
-+ return 0;
-+}
-+IRQCHIP_DECLARE(ath79_intc, "qca,ar9340-intc",
-+ ath79_intc_of_init);
+++ /dev/null
-From e029f998594f151008ecbfa024e2957edd2a5189 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 09:58:19 +0100
-Subject: [PATCH 08/33] irqchip/irq-ath79-cpu: drop !OF init helper
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/irqchip/irq-ath79-cpu.c | 7 -------
- 1 file changed, 7 deletions(-)
-
---- a/drivers/irqchip/irq-ath79-cpu.c
-+++ b/drivers/irqchip/irq-ath79-cpu.c
-@@ -88,10 +88,3 @@ static int __init ar79_cpu_intc_of_init(
- }
- IRQCHIP_DECLARE(ar79_cpu_intc, "qca,ar7100-cpu-intc",
- ar79_cpu_intc_of_init);
--
--void __init ath79_cpu_irq_init(unsigned irq_wb_chan2, unsigned irq_wb_chan3)
--{
-- irq_wb_chan[2] = irq_wb_chan2;
-- irq_wb_chan[3] = irq_wb_chan3;
-- mips_cpu_irq_init();
--}
+++ /dev/null
-From 0c8856211d26f84277f7fcb0b9595e5c646bc464 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 6 Mar 2018 10:00:55 +0100
-Subject: [PATCH 11/33] MIPS: ath79: select the PINCTRL subsystem
-
-The pinmux on QCA SoCs is controlled by a single register. The
-"pinctrl-single" driver can be used but requires the target
-to select PINCTRL.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/Kconfig | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -288,6 +288,7 @@ config BCM63XX
- select SYS_HAS_EARLY_PRINTK
- select SWAP_IO_SPACE
- select GPIOLIB
-+ select PINCTRL
- select HAVE_CLK
- select MIPS_L1_CACHE_SHIFT_4
- select CLKDEV_LOOKUP
+++ /dev/null
-From 4a4f869ec58ed8910b9b2e68d0eee50957e9bb20 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Mon, 25 Jun 2018 15:52:10 +0200
-Subject: [PATCH 17/33] dt-bindings: PCI: qcom,ar7100: adds binding doc
-
-With the driver being converted from platform_data to pure OF, we need to
-also add some docs.
-
-Cc: Rob Herring <robh+dt@kernel.org>
-Cc: devicetree@vger.kernel.org
-Signed-off-by: John Crispin <john@phrozen.org>
----
- .../devicetree/bindings/pci/qcom,ar7100-pci.txt | 38 ++++++++++++++++++++++
- 1 file changed, 38 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pci/qcom,ar7100-pci.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pci/qcom,ar7100-pci.txt
-@@ -0,0 +1,38 @@
-+* Qualcomm Atheros AR7100 PCI express root complex
-+
-+Required properties:
-+- compatible: should contain "qcom,ar7100-pci" to identify the core.
-+- reg: Should contain the register ranges as listed in the reg-names property.
-+- reg-names: Definition: Must include the following entries
-+ - "cfg_base" IO Memory
-+- #address-cells: set to <3>
-+- #size-cells: set to <2>
-+- ranges: ranges for the PCI memory and I/O regions
-+- interrupt-map-mask and interrupt-map: standard PCI
-+ properties to define the mapping of the PCIe interface to interrupt
-+ numbers.
-+- #interrupt-cells: set to <1>
-+- interrupt-controller: define to enable the builtin IRQ cascade.
-+
-+Optional properties:
-+- interrupt-parent: phandle to the MIPS IRQ controller
-+
-+* Example for ar7100
-+ pcie-controller@180c0000 {
-+ compatible = "qca,ar7100-pci";
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ bus-range = <0x0 0x0>;
-+ reg = <0x17010000 0x100>;
-+ reg-names = "cfg_base";
-+ ranges = <0x2000000 0 0x10000000 0x10000000 0 0x07000000
-+ 0x1000000 0 0x00000000 0x00000000 0 0x00000001>;
-+ interrupt-parent = <&cpuintc>;
-+ interrupts = <2>;
-+
-+ interrupt-controller;
-+ #interrupt-cells = <1>;
-+
-+ interrupt-map-mask = <0 0 0 1>;
-+ interrupt-map = <0 0 0 0 &pcie0 0>;
-+ };
+++ /dev/null
-From 1855ab6b1d27f5b38a648baf57ff6a534afec26d Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Sat, 23 Jun 2018 15:07:23 +0200
-Subject: [PATCH 18/33] MIPS: pci-ar71xx: convert to OF
-
-With the ath79 target getting converted to pure OF, we can drop all the
-platform data code and add the missing OF bits to the driver. We also add
-a irq domain for the PCI/e controllers cascade, thus making it usable from
-dts files.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/pci/pci-ar71xx.c | 82 +++++++++++++++++++++++-----------------------
- 1 file changed, 41 insertions(+), 41 deletions(-)
-
---- a/arch/mips/pci/pci-ar71xx.c
-+++ b/arch/mips/pci/pci-ar71xx.c
-@@ -18,8 +18,11 @@
- #include <linux/pci.h>
- #include <linux/pci_regs.h>
- #include <linux/interrupt.h>
-+#include <linux/irqchip/chained_irq.h>
- #include <linux/init.h>
- #include <linux/platform_device.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_pci.h>
-
- #include <asm/mach-ath79/ar71xx_regs.h>
- #include <asm/mach-ath79/ath79.h>
-@@ -49,12 +52,13 @@
- #define AR71XX_PCI_IRQ_COUNT 5
-
- struct ar71xx_pci_controller {
-+ struct device_node *np;
- void __iomem *cfg_base;
- int irq;
-- int irq_base;
- struct pci_controller pci_ctrl;
- struct resource io_res;
- struct resource mem_res;
-+ struct irq_domain *domain;
- };
-
- /* Byte lane enable bits */
-@@ -228,29 +232,30 @@ static struct pci_ops ar71xx_pci_ops = {
-
- static void ar71xx_pci_irq_handler(struct irq_desc *desc)
- {
-- struct ar71xx_pci_controller *apc;
- void __iomem *base = ath79_reset_base;
-+ struct irq_chip *chip = irq_desc_get_chip(desc);
-+ struct ar71xx_pci_controller *apc = irq_desc_get_handler_data(desc);
- u32 pending;
-
-- apc = irq_desc_get_handler_data(desc);
--
-+ chained_irq_enter(chip, desc);
- pending = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_STATUS) &
- __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
-
- if (pending & AR71XX_PCI_INT_DEV0)
-- generic_handle_irq(apc->irq_base + 0);
-+ generic_handle_irq(irq_linear_revmap(apc->domain, 1));
-
- else if (pending & AR71XX_PCI_INT_DEV1)
-- generic_handle_irq(apc->irq_base + 1);
-+ generic_handle_irq(irq_linear_revmap(apc->domain, 2));
-
- else if (pending & AR71XX_PCI_INT_DEV2)
-- generic_handle_irq(apc->irq_base + 2);
-+ generic_handle_irq(irq_linear_revmap(apc->domain, 3));
-
- else if (pending & AR71XX_PCI_INT_CORE)
-- generic_handle_irq(apc->irq_base + 4);
-+ generic_handle_irq(irq_linear_revmap(apc->domain, 4));
-
- else
- spurious_interrupt();
-+ chained_irq_exit(chip, desc);
- }
-
- static void ar71xx_pci_irq_unmask(struct irq_data *d)
-@@ -261,7 +266,7 @@ static void ar71xx_pci_irq_unmask(struct
- u32 t;
-
- apc = irq_data_get_irq_chip_data(d);
-- irq = d->irq - apc->irq_base;
-+ irq = irq_linear_revmap(apc->domain, d->irq);
-
- t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
- __raw_writel(t | (1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
-@@ -278,7 +283,7 @@ static void ar71xx_pci_irq_mask(struct i
- u32 t;
-
- apc = irq_data_get_irq_chip_data(d);
-- irq = d->irq - apc->irq_base;
-+ irq = irq_linear_revmap(apc->domain, d->irq);
-
- t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
- __raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
-@@ -294,24 +299,31 @@ static struct irq_chip ar71xx_pci_irq_ch
- .irq_mask_ack = ar71xx_pci_irq_mask,
- };
-
-+static int ar71xx_pci_irq_map(struct irq_domain *d,
-+ unsigned int irq, irq_hw_number_t hw)
-+{
-+ struct ar71xx_pci_controller *apc = d->host_data;
-+
-+ irq_set_chip_and_handler(irq, &ar71xx_pci_irq_chip, handle_level_irq);
-+ irq_set_chip_data(irq, apc);
-+
-+ return 0;
-+}
-+
-+static const struct irq_domain_ops ar71xx_pci_domain_ops = {
-+ .xlate = irq_domain_xlate_onecell,
-+ .map = ar71xx_pci_irq_map,
-+};
-+
- static void ar71xx_pci_irq_init(struct ar71xx_pci_controller *apc)
- {
- void __iomem *base = ath79_reset_base;
-- int i;
-
- __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_ENABLE);
- __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_STATUS);
-
-- BUILD_BUG_ON(ATH79_PCI_IRQ_COUNT < AR71XX_PCI_IRQ_COUNT);
--
-- apc->irq_base = ATH79_PCI_IRQ_BASE;
-- for (i = apc->irq_base;
-- i < apc->irq_base + AR71XX_PCI_IRQ_COUNT; i++) {
-- irq_set_chip_and_handler(i, &ar71xx_pci_irq_chip,
-- handle_level_irq);
-- irq_set_chip_data(i, apc);
-- }
--
-+ apc->domain = irq_domain_add_linear(apc->np, AR71XX_PCI_IRQ_COUNT,
-+ &ar71xx_pci_domain_ops, apc);
- irq_set_chained_handler_and_data(apc->irq, ar71xx_pci_irq_handler,
- apc);
- }
-@@ -328,6 +340,11 @@ static void ar71xx_pci_reset(void)
- mdelay(100);
- }
-
-+static const struct of_device_id ar71xx_pci_ids[] = {
-+ { .compatible = "qca,ar7100-pci" },
-+ {},
-+};
-+
- static int ar71xx_pci_probe(struct platform_device *pdev)
- {
- struct ar71xx_pci_controller *apc;
-@@ -348,26 +365,6 @@ static int ar71xx_pci_probe(struct platf
- if (apc->irq < 0)
- return -EINVAL;
-
-- res = platform_get_resource_byname(pdev, IORESOURCE_IO, "io_base");
-- if (!res)
-- return -EINVAL;
--
-- apc->io_res.parent = res;
-- apc->io_res.name = "PCI IO space";
-- apc->io_res.start = res->start;
-- apc->io_res.end = res->end;
-- apc->io_res.flags = IORESOURCE_IO;
--
-- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem_base");
-- if (!res)
-- return -EINVAL;
--
-- apc->mem_res.parent = res;
-- apc->mem_res.name = "PCI memory space";
-- apc->mem_res.start = res->start;
-- apc->mem_res.end = res->end;
-- apc->mem_res.flags = IORESOURCE_MEM;
--
- ar71xx_pci_reset();
-
- /* setup COMMAND register */
-@@ -380,9 +377,11 @@ static int ar71xx_pci_probe(struct platf
-
- ar71xx_pci_irq_init(apc);
-
-+ apc->np = pdev->dev.of_node;
- apc->pci_ctrl.pci_ops = &ar71xx_pci_ops;
- apc->pci_ctrl.mem_resource = &apc->mem_res;
- apc->pci_ctrl.io_resource = &apc->io_res;
-+ pci_load_of_ranges(&apc->pci_ctrl, pdev->dev.of_node);
-
- register_pci_controller(&apc->pci_ctrl);
-
-@@ -393,6 +392,7 @@ static struct platform_driver ar71xx_pci
- .probe = ar71xx_pci_probe,
- .driver = {
- .name = "ar71xx-pci",
-+ .of_match_table = of_match_ptr(ar71xx_pci_ids),
- },
- };
-
+++ /dev/null
-From ea27764bc3ef2a05decf3ae05edffc289cd0d93c Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Mon, 25 Jun 2018 15:52:02 +0200
-Subject: [PATCH 19/33] dt-bindings: PCI: qcom,ar7240: adds binding doc
-
-With the driver being converted from platform_data to pure OF, we need to
-also add some docs.
-
-Cc: Rob Herring <robh+dt@kernel.org>
-Cc: devicetree@vger.kernel.org
-Signed-off-by: John Crispin <john@phrozen.org>
----
- .../devicetree/bindings/pci/qcom,ar7240-pci.txt | 42 ++++++++++++++++++++++
- 1 file changed, 42 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pci/qcom,ar7240-pci.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pci/qcom,ar7240-pci.txt
-@@ -0,0 +1,42 @@
-+* Qualcomm Atheros AR724X PCI express root complex
-+
-+Required properties:
-+- compatible: should contain "qcom,ar7240-pci" to identify the core.
-+- reg: Should contain the register ranges as listed in the reg-names property.
-+- reg-names: Definition: Must include the following entries
-+ - "crp_base" Configuration registers
-+ - "ctrl_base" Control registers
-+ - "cfg_base" IO Memory
-+- #address-cells: set to <3>
-+- #size-cells: set to <2>
-+- ranges: ranges for the PCI memory and I/O regions
-+- interrupt-map-mask and interrupt-map: standard PCI
-+ properties to define the mapping of the PCIe interface to interrupt
-+ numbers.
-+- #interrupt-cells: set to <1>
-+- interrupt-parent: phandle to the MIPS IRQ controller
-+
-+Optional properties:
-+- interrupt-controller: define to enable the builtin IRQ cascade.
-+
-+* Example for qca9557
-+ pcie-controller@180c0000 {
-+ compatible = "qcom,ar7240-pci";
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ bus-range = <0x0 0x0>;
-+ reg = <0x180c0000 0x1000>,
-+ <0x180f0000 0x100>,
-+ <0x14000000 0x1000>;
-+ reg-names = "crp_base", "ctrl_base", "cfg_base";
-+ ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000
-+ 0x1000000 0 0x00000000 0x00000000 0 0x00000001>;
-+ interrupt-parent = <&intc2>;
-+ interrupts = <1>;
-+
-+ interrupt-controller;
-+ #interrupt-cells = <1>;
-+
-+ interrupt-map-mask = <0 0 0 1>;
-+ interrupt-map = <0 0 0 0 &pcie0 0>;
-+ };
+++ /dev/null
-From a522ee0199d5d3ea114ca2e211f6ac398d3e8e0b Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Sat, 23 Jun 2018 15:07:37 +0200
-Subject: [PATCH 20/33] MIPS: pci-ar724x: convert to OF
-
-With the ath79 target getting converted to pure OF, we can drop all the
-platform data code and add the missing OF bits to the driver. We also add
-a irq domain for the PCI/e controllers cascade, thus making it usable from
-dts files.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/pci/pci-ar724x.c | 88 ++++++++++++++++++++++------------------------
- 1 file changed, 42 insertions(+), 46 deletions(-)
-
---- a/arch/mips/pci/pci-ar724x.c
-+++ b/arch/mips/pci/pci-ar724x.c
-@@ -14,8 +14,11 @@
- #include <linux/init.h>
- #include <linux/delay.h>
- #include <linux/platform_device.h>
-+#include <linux/irqchip/chained_irq.h>
- #include <asm/mach-ath79/ath79.h>
- #include <asm/mach-ath79/ar71xx_regs.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_pci.h>
-
- #define AR724X_PCI_REG_APP 0x00
- #define AR724X_PCI_REG_RESET 0x18
-@@ -45,17 +48,20 @@ struct ar724x_pci_controller {
- void __iomem *crp_base;
-
- int irq;
-- int irq_base;
-
- bool link_up;
- bool bar0_is_cached;
- u32 bar0_value;
-
-+ struct device_node *np;
- struct pci_controller pci_controller;
-+ struct irq_domain *domain;
- struct resource io_res;
- struct resource mem_res;
- };
-
-+static struct irq_chip ar724x_pci_irq_chip;
-+
- static inline bool ar724x_pci_check_link(struct ar724x_pci_controller *apc)
- {
- u32 reset;
-@@ -231,35 +237,31 @@ static struct pci_ops ar724x_pci_ops = {
-
- static void ar724x_pci_irq_handler(struct irq_desc *desc)
- {
-- struct ar724x_pci_controller *apc;
-- void __iomem *base;
-+ struct irq_chip *chip = irq_desc_get_chip(desc);
-+ struct ar724x_pci_controller *apc = irq_desc_get_handler_data(desc);
- u32 pending;
-
-- apc = irq_desc_get_handler_data(desc);
-- base = apc->ctrl_base;
--
-- pending = __raw_readl(base + AR724X_PCI_REG_INT_STATUS) &
-- __raw_readl(base + AR724X_PCI_REG_INT_MASK);
-+ chained_irq_enter(chip, desc);
-+ pending = __raw_readl(apc->ctrl_base + AR724X_PCI_REG_INT_STATUS) &
-+ __raw_readl(apc->ctrl_base + AR724X_PCI_REG_INT_MASK);
-
- if (pending & AR724X_PCI_INT_DEV0)
-- generic_handle_irq(apc->irq_base + 0);
--
-+ generic_handle_irq(irq_linear_revmap(apc->domain, 1));
- else
- spurious_interrupt();
-+ chained_irq_exit(chip, desc);
- }
-
- static void ar724x_pci_irq_unmask(struct irq_data *d)
- {
- struct ar724x_pci_controller *apc;
- void __iomem *base;
-- int offset;
- u32 t;
-
- apc = irq_data_get_irq_chip_data(d);
- base = apc->ctrl_base;
-- offset = apc->irq_base - d->irq;
-
-- switch (offset) {
-+ switch (irq_linear_revmap(apc->domain, d->irq)) {
- case 0:
- t = __raw_readl(base + AR724X_PCI_REG_INT_MASK);
- __raw_writel(t | AR724X_PCI_INT_DEV0,
-@@ -273,14 +275,12 @@ static void ar724x_pci_irq_mask(struct i
- {
- struct ar724x_pci_controller *apc;
- void __iomem *base;
-- int offset;
- u32 t;
-
- apc = irq_data_get_irq_chip_data(d);
- base = apc->ctrl_base;
-- offset = apc->irq_base - d->irq;
-
-- switch (offset) {
-+ switch (irq_linear_revmap(apc->domain, d->irq)) {
- case 0:
- t = __raw_readl(base + AR724X_PCI_REG_INT_MASK);
- __raw_writel(t & ~AR724X_PCI_INT_DEV0,
-@@ -305,26 +305,34 @@ static struct irq_chip ar724x_pci_irq_ch
- .irq_mask_ack = ar724x_pci_irq_mask,
- };
-
-+static int ar724x_pci_irq_map(struct irq_domain *d,
-+ unsigned int irq, irq_hw_number_t hw)
-+{
-+ struct ar724x_pci_controller *apc = d->host_data;
-+
-+ irq_set_chip_and_handler(irq, &ar724x_pci_irq_chip, handle_level_irq);
-+ irq_set_chip_data(irq, apc);
-+
-+ return 0;
-+}
-+
-+static const struct irq_domain_ops ar724x_pci_domain_ops = {
-+ .xlate = irq_domain_xlate_onecell,
-+ .map = ar724x_pci_irq_map,
-+};
-+
- static void ar724x_pci_irq_init(struct ar724x_pci_controller *apc,
- int id)
- {
- void __iomem *base;
-- int i;
-
- base = apc->ctrl_base;
-
- __raw_writel(0, base + AR724X_PCI_REG_INT_MASK);
- __raw_writel(0, base + AR724X_PCI_REG_INT_STATUS);
-
-- apc->irq_base = ATH79_PCI_IRQ_BASE + (id * AR724X_PCI_IRQ_COUNT);
--
-- for (i = apc->irq_base;
-- i < apc->irq_base + AR724X_PCI_IRQ_COUNT; i++) {
-- irq_set_chip_and_handler(i, &ar724x_pci_irq_chip,
-- handle_level_irq);
-- irq_set_chip_data(i, apc);
-- }
--
-+ apc->domain = irq_domain_add_linear(apc->np, 2,
-+ &ar724x_pci_domain_ops, apc);
- irq_set_chained_handler_and_data(apc->irq, ar724x_pci_irq_handler,
- apc);
- }
-@@ -394,29 +402,11 @@ static int ar724x_pci_probe(struct platf
- if (apc->irq < 0)
- return -EINVAL;
-
-- res = platform_get_resource_byname(pdev, IORESOURCE_IO, "io_base");
-- if (!res)
-- return -EINVAL;
--
-- apc->io_res.parent = res;
-- apc->io_res.name = "PCI IO space";
-- apc->io_res.start = res->start;
-- apc->io_res.end = res->end;
-- apc->io_res.flags = IORESOURCE_IO;
--
-- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem_base");
-- if (!res)
-- return -EINVAL;
--
-- apc->mem_res.parent = res;
-- apc->mem_res.name = "PCI memory space";
-- apc->mem_res.start = res->start;
-- apc->mem_res.end = res->end;
-- apc->mem_res.flags = IORESOURCE_MEM;
--
-+ apc->np = pdev->dev.of_node;
- apc->pci_controller.pci_ops = &ar724x_pci_ops;
- apc->pci_controller.io_resource = &apc->io_res;
- apc->pci_controller.mem_resource = &apc->mem_res;
-+ pci_load_of_ranges(&apc->pci_controller, pdev->dev.of_node);
-
- /*
- * Do the full PCIE Root Complex Initialization Sequence if the PCIe
-@@ -438,10 +428,16 @@ static int ar724x_pci_probe(struct platf
- return 0;
- }
-
-+static const struct of_device_id ar724x_pci_ids[] = {
-+ { .compatible = "qcom,ar7240-pci" },
-+ {},
-+};
-+
- static struct platform_driver ar724x_pci_driver = {
- .probe = ar724x_pci_probe,
- .driver = {
- .name = "ar724x-pci",
-+ .of_match_table = of_match_ptr(ar724x_pci_ids),
- },
- };
-
+++ /dev/null
-From 288a8eb0d41f09fda242e05f8a7bd1f5b3489477 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Tue, 6 Mar 2018 13:19:26 +0100
-Subject: [PATCH 21/33] MIPS: ath79: add helpers for setting clocks and expose
- the ref clock
-
-Preparation for transitioning the legacy clock setup code over
-to OF.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/ath79/clock.c | 128 ++++++++++++++++++----------------
- include/dt-bindings/clock/ath79-clk.h | 3 +-
- 2 files changed, 68 insertions(+), 63 deletions(-)
-
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -37,20 +37,46 @@ static struct clk_onecell_data clk_data
- .clk_num = ARRAY_SIZE(clks),
- };
-
--static struct clk *__init ath79_add_sys_clkdev(
-- const char *id, unsigned long rate)
-+static const char * const clk_names[ATH79_CLK_END] = {
-+ [ATH79_CLK_CPU] = "cpu",
-+ [ATH79_CLK_DDR] = "ddr",
-+ [ATH79_CLK_AHB] = "ahb",
-+ [ATH79_CLK_REF] = "ref",
-+};
-+
-+static const char * __init ath79_clk_name(int type)
- {
-- struct clk *clk;
-- int err;
-+ BUG_ON(type >= ARRAY_SIZE(clk_names) || !clk_names[type]);
-+ return clk_names[type];
-+}
-
-- clk = clk_register_fixed_rate(NULL, id, NULL, 0, rate);
-+static void __init __ath79_set_clk(int type, const char *name, struct clk *clk)
-+{
- if (IS_ERR(clk))
-- panic("failed to allocate %s clock structure", id);
-+ panic("failed to allocate %s clock structure", clk_names[type]);
-
-- err = clk_register_clkdev(clk, id, NULL);
-- if (err)
-- panic("unable to register %s clock device", id);
-+ clks[type] = clk;
-+ clk_register_clkdev(clk, name, NULL);
-+}
-
-+static struct clk * __init ath79_set_clk(int type, unsigned long rate)
-+{
-+ const char *name = ath79_clk_name(type);
-+ struct clk *clk;
-+
-+ clk = clk_register_fixed_rate(NULL, name, NULL, 0, rate);
-+ __ath79_set_clk(type, name, clk);
-+ return clk;
-+}
-+
-+static struct clk * __init ath79_set_ff_clk(int type, const char *parent,
-+ unsigned int mult, unsigned int div)
-+{
-+ const char *name = ath79_clk_name(type);
-+ struct clk *clk;
-+
-+ clk = clk_register_fixed_factor(NULL, name, parent, 0, mult, div);
-+ __ath79_set_clk(type, name, clk);
- return clk;
- }
-
-@@ -80,27 +106,15 @@ static void __init ar71xx_clocks_init(vo
- div = (((pll >> AR71XX_AHB_DIV_SHIFT) & AR71XX_AHB_DIV_MASK) + 1) * 2;
- ahb_rate = cpu_rate / div;
-
-- ath79_add_sys_clkdev("ref", ref_rate);
-- clks[ATH79_CLK_CPU] = ath79_add_sys_clkdev("cpu", cpu_rate);
-- clks[ATH79_CLK_DDR] = ath79_add_sys_clkdev("ddr", ddr_rate);
-- clks[ATH79_CLK_AHB] = ath79_add_sys_clkdev("ahb", ahb_rate);
-+ ath79_set_clk(ATH79_CLK_REF, ref_rate);
-+ ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
-+ ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
-+ ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
-
- clk_add_alias("wdt", NULL, "ahb", NULL);
- clk_add_alias("uart", NULL, "ahb", NULL);
- }
-
--static struct clk * __init ath79_reg_ffclk(const char *name,
-- const char *parent_name, unsigned int mult, unsigned int div)
--{
-- struct clk *clk;
--
-- clk = clk_register_fixed_factor(NULL, name, parent_name, 0, mult, div);
-- if (IS_ERR(clk))
-- panic("failed to allocate %s clock structure", name);
--
-- return clk;
--}
--
- static void __init ar724x_clk_init(struct clk *ref_clk, void __iomem *pll_base)
- {
- u32 pll;
-@@ -114,24 +128,19 @@ static void __init ar724x_clk_init(struc
- ddr_div = ((pll >> AR724X_DDR_DIV_SHIFT) & AR724X_DDR_DIV_MASK) + 1;
- ahb_div = (((pll >> AR724X_AHB_DIV_SHIFT) & AR724X_AHB_DIV_MASK) + 1) * 2;
-
-- clks[ATH79_CLK_CPU] = ath79_reg_ffclk("cpu", "ref", mult, div);
-- clks[ATH79_CLK_DDR] = ath79_reg_ffclk("ddr", "ref", mult, div * ddr_div);
-- clks[ATH79_CLK_AHB] = ath79_reg_ffclk("ahb", "ref", mult, div * ahb_div);
-+ ath79_set_ff_clk(ATH79_CLK_CPU, "ref", mult, div);
-+ ath79_set_ff_clk(ATH79_CLK_DDR, "ref", mult, div * ddr_div);
-+ ath79_set_ff_clk(ATH79_CLK_AHB, "ref", mult, div * ahb_div);
- }
-
- static void __init ar724x_clocks_init(void)
- {
- struct clk *ref_clk;
-
-- ref_clk = ath79_add_sys_clkdev("ref", AR724X_BASE_FREQ);
-+ ref_clk = ath79_set_clk(ATH79_CLK_REF, AR724X_BASE_FREQ);
-
- ar724x_clk_init(ref_clk, ath79_pll_base);
-
-- /* just make happy plat_time_init() from arch/mips/ath79/setup.c */
-- clk_register_clkdev(clks[ATH79_CLK_CPU], "cpu", NULL);
-- clk_register_clkdev(clks[ATH79_CLK_DDR], "ddr", NULL);
-- clk_register_clkdev(clks[ATH79_CLK_AHB], "ahb", NULL);
--
- clk_add_alias("wdt", NULL, "ahb", NULL);
- clk_add_alias("uart", NULL, "ahb", NULL);
- }
-@@ -186,12 +195,12 @@ static void __init ar9330_clk_init(struc
- AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK) + 1;
- }
-
-- clks[ATH79_CLK_CPU] = ath79_reg_ffclk("cpu", "ref",
-- ninit_mul, ref_div * out_div * cpu_div);
-- clks[ATH79_CLK_DDR] = ath79_reg_ffclk("ddr", "ref",
-- ninit_mul, ref_div * out_div * ddr_div);
-- clks[ATH79_CLK_AHB] = ath79_reg_ffclk("ahb", "ref",
-- ninit_mul, ref_div * out_div * ahb_div);
-+ ath79_set_ff_clk(ATH79_CLK_CPU, "ref", ninit_mul,
-+ ref_div * out_div * cpu_div);
-+ ath79_set_ff_clk(ATH79_CLK_DDR, "ref", ninit_mul,
-+ ref_div * out_div * ddr_div);
-+ ath79_set_ff_clk(ATH79_CLK_AHB, "ref", ninit_mul,
-+ ref_div * out_div * ahb_div);
- }
-
- static void __init ar933x_clocks_init(void)
-@@ -206,15 +215,10 @@ static void __init ar933x_clocks_init(vo
- else
- ref_rate = (25 * 1000 * 1000);
-
-- ref_clk = ath79_add_sys_clkdev("ref", ref_rate);
-+ ref_clk = ath79_set_clk(ATH79_CLK_REF, ref_rate);
-
- ar9330_clk_init(ref_clk, ath79_pll_base);
-
-- /* just make happy plat_time_init() from arch/mips/ath79/setup.c */
-- clk_register_clkdev(clks[ATH79_CLK_CPU], "cpu", NULL);
-- clk_register_clkdev(clks[ATH79_CLK_DDR], "ddr", NULL);
-- clk_register_clkdev(clks[ATH79_CLK_AHB], "ahb", NULL);
--
- clk_add_alias("wdt", NULL, "ahb", NULL);
- clk_add_alias("uart", NULL, "ref", NULL);
- }
-@@ -344,10 +348,10 @@ static void __init ar934x_clocks_init(vo
- else
- ahb_rate = cpu_pll / (postdiv + 1);
-
-- ath79_add_sys_clkdev("ref", ref_rate);
-- clks[ATH79_CLK_CPU] = ath79_add_sys_clkdev("cpu", cpu_rate);
-- clks[ATH79_CLK_DDR] = ath79_add_sys_clkdev("ddr", ddr_rate);
-- clks[ATH79_CLK_AHB] = ath79_add_sys_clkdev("ahb", ahb_rate);
-+ ath79_set_clk(ATH79_CLK_REF, ref_rate);
-+ ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
-+ ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
-+ ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
-
- clk_add_alias("wdt", NULL, "ref", NULL);
- clk_add_alias("uart", NULL, "ref", NULL);
-@@ -431,10 +435,10 @@ static void __init qca953x_clocks_init(v
- else
- ahb_rate = cpu_pll / (postdiv + 1);
-
-- ath79_add_sys_clkdev("ref", ref_rate);
-- ath79_add_sys_clkdev("cpu", cpu_rate);
-- ath79_add_sys_clkdev("ddr", ddr_rate);
-- ath79_add_sys_clkdev("ahb", ahb_rate);
-+ ath79_set_clk(ATH79_CLK_REF, ref_rate);
-+ ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
-+ ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
-+ ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
-
- clk_add_alias("wdt", NULL, "ref", NULL);
- clk_add_alias("uart", NULL, "ref", NULL);
-@@ -516,10 +520,10 @@ static void __init qca955x_clocks_init(v
- else
- ahb_rate = cpu_pll / (postdiv + 1);
-
-- ath79_add_sys_clkdev("ref", ref_rate);
-- clks[ATH79_CLK_CPU] = ath79_add_sys_clkdev("cpu", cpu_rate);
-- clks[ATH79_CLK_DDR] = ath79_add_sys_clkdev("ddr", ddr_rate);
-- clks[ATH79_CLK_AHB] = ath79_add_sys_clkdev("ahb", ahb_rate);
-+ ath79_set_clk(ATH79_CLK_REF, ref_rate);
-+ ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
-+ ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
-+ ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
-
- clk_add_alias("wdt", NULL, "ref", NULL);
- clk_add_alias("uart", NULL, "ref", NULL);
-@@ -620,10 +624,10 @@ static void __init qca956x_clocks_init(v
- else
- ahb_rate = cpu_pll / (postdiv + 1);
-
-- ath79_add_sys_clkdev("ref", ref_rate);
-- ath79_add_sys_clkdev("cpu", cpu_rate);
-- ath79_add_sys_clkdev("ddr", ddr_rate);
-- ath79_add_sys_clkdev("ahb", ahb_rate);
-+ ath79_set_clk(ATH79_CLK_REF, ref_rate);
-+ ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
-+ ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
-+ ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
-
- clk_add_alias("wdt", NULL, "ref", NULL);
- clk_add_alias("uart", NULL, "ref", NULL);
---- a/include/dt-bindings/clock/ath79-clk.h
-+++ b/include/dt-bindings/clock/ath79-clk.h
-@@ -13,7 +13,8 @@
- #define ATH79_CLK_CPU 0
- #define ATH79_CLK_DDR 1
- #define ATH79_CLK_AHB 2
-+#define ATH79_CLK_REF 3
-
--#define ATH79_CLK_END 3
-+#define ATH79_CLK_END 4
-
- #endif /* __DT_BINDINGS_ATH79_CLK_H */
+++ /dev/null
-From 339c191a95e978353c9ba3aafab0261e14de109b Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Tue, 6 Mar 2018 13:22:43 +0100
-Subject: [PATCH 22/33] MIPS: ath79: move legacy "wdt" and "uart" clock aliases
- out of soc init
-
-Preparation for reusing functions for DT
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/ath79/clock.c | 38 +++++++++++++++++---------------------
- 1 file changed, 17 insertions(+), 21 deletions(-)
-
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -110,9 +110,6 @@ static void __init ar71xx_clocks_init(vo
- ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
- ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
--
-- clk_add_alias("wdt", NULL, "ahb", NULL);
-- clk_add_alias("uart", NULL, "ahb", NULL);
- }
-
- static void __init ar724x_clk_init(struct clk *ref_clk, void __iomem *pll_base)
-@@ -140,9 +137,6 @@ static void __init ar724x_clocks_init(vo
- ref_clk = ath79_set_clk(ATH79_CLK_REF, AR724X_BASE_FREQ);
-
- ar724x_clk_init(ref_clk, ath79_pll_base);
--
-- clk_add_alias("wdt", NULL, "ahb", NULL);
-- clk_add_alias("uart", NULL, "ahb", NULL);
- }
-
- static void __init ar9330_clk_init(struct clk *ref_clk, void __iomem *pll_base)
-@@ -218,9 +212,6 @@ static void __init ar933x_clocks_init(vo
- ref_clk = ath79_set_clk(ATH79_CLK_REF, ref_rate);
-
- ar9330_clk_init(ref_clk, ath79_pll_base);
--
-- clk_add_alias("wdt", NULL, "ahb", NULL);
-- clk_add_alias("uart", NULL, "ref", NULL);
- }
-
- static u32 __init ar934x_get_pll_freq(u32 ref, u32 ref_div, u32 nint, u32 nfrac,
-@@ -353,9 +344,6 @@ static void __init ar934x_clocks_init(vo
- ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
-
-- clk_add_alias("wdt", NULL, "ref", NULL);
-- clk_add_alias("uart", NULL, "ref", NULL);
--
- iounmap(dpll_base);
- }
-
-@@ -439,9 +427,6 @@ static void __init qca953x_clocks_init(v
- ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
- ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
--
-- clk_add_alias("wdt", NULL, "ref", NULL);
-- clk_add_alias("uart", NULL, "ref", NULL);
- }
-
- static void __init qca955x_clocks_init(void)
-@@ -524,9 +509,6 @@ static void __init qca955x_clocks_init(v
- ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
- ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
--
-- clk_add_alias("wdt", NULL, "ref", NULL);
-- clk_add_alias("uart", NULL, "ref", NULL);
- }
-
- static void __init qca956x_clocks_init(void)
-@@ -628,13 +610,13 @@ static void __init qca956x_clocks_init(v
- ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
- ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
--
-- clk_add_alias("wdt", NULL, "ref", NULL);
-- clk_add_alias("uart", NULL, "ref", NULL);
- }
-
- void __init ath79_clocks_init(void)
- {
-+ const char *wdt;
-+ const char *uart;
-+
- if (soc_is_ar71xx())
- ar71xx_clocks_init();
- else if (soc_is_ar724x() || soc_is_ar913x())
-@@ -651,6 +633,20 @@ void __init ath79_clocks_init(void)
- qca956x_clocks_init();
- else
- BUG();
-+
-+ if (soc_is_ar71xx() || soc_is_ar724x() || soc_is_ar913x()) {
-+ wdt = "ahb";
-+ uart = "ahb";
-+ } else if (soc_is_ar933x()) {
-+ wdt = "ahb";
-+ uart = "ref";
-+ } else {
-+ wdt = "ref";
-+ uart = "ref";
-+ }
-+
-+ clk_add_alias("wdt", NULL, wdt, NULL);
-+ clk_add_alias("uart", NULL, uart, NULL);
- }
-
- unsigned long __init
+++ /dev/null
-From 6350b2c36c522fecbc91a80b63f49319dafd2a72 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Tue, 6 Mar 2018 13:23:20 +0100
-Subject: [PATCH 23/33] MIPS: ath79: pass PLL base to clock init functions
-
-Preparation for passing the mapped base via DT
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/ath79/clock.c | 60 ++++++++++++++++++++++++-------------------------
- 1 file changed, 30 insertions(+), 30 deletions(-)
-
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -80,7 +80,7 @@ static struct clk * __init ath79_set_ff_
- return clk;
- }
-
--static void __init ar71xx_clocks_init(void)
-+static void __init ar71xx_clocks_init(void __iomem *pll_base)
- {
- unsigned long ref_rate;
- unsigned long cpu_rate;
-@@ -92,7 +92,7 @@ static void __init ar71xx_clocks_init(vo
-
- ref_rate = AR71XX_BASE_FREQ;
-
-- pll = ath79_pll_rr(AR71XX_PLL_REG_CPU_CONFIG);
-+ pll = __raw_readl(pll_base + AR71XX_PLL_REG_CPU_CONFIG);
-
- div = ((pll >> AR71XX_PLL_FB_SHIFT) & AR71XX_PLL_FB_MASK) + 1;
- freq = div * ref_rate;
-@@ -130,13 +130,13 @@ static void __init ar724x_clk_init(struc
- ath79_set_ff_clk(ATH79_CLK_AHB, "ref", mult, div * ahb_div);
- }
-
--static void __init ar724x_clocks_init(void)
-+static void __init ar724x_clocks_init(void __iomem *pll_base)
- {
- struct clk *ref_clk;
-
- ref_clk = ath79_set_clk(ATH79_CLK_REF, AR724X_BASE_FREQ);
-
-- ar724x_clk_init(ref_clk, ath79_pll_base);
-+ ar724x_clk_init(ref_clk, pll_base);
- }
-
- static void __init ar9330_clk_init(struct clk *ref_clk, void __iomem *pll_base)
-@@ -197,7 +197,7 @@ static void __init ar9330_clk_init(struc
- ref_div * out_div * ahb_div);
- }
-
--static void __init ar933x_clocks_init(void)
-+static void __init ar933x_clocks_init(void __iomem *pll_base)
- {
- struct clk *ref_clk;
- unsigned long ref_rate;
-@@ -234,7 +234,7 @@ static u32 __init ar934x_get_pll_freq(u3
- return ret;
- }
-
--static void __init ar934x_clocks_init(void)
-+static void __init ar934x_clocks_init(void __iomem *pll_base)
- {
- unsigned long ref_rate;
- unsigned long cpu_rate;
-@@ -265,7 +265,7 @@ static void __init ar934x_clocks_init(vo
- AR934X_SRIF_DPLL1_REFDIV_MASK;
- frac = 1 << 18;
- } else {
-- pll = ath79_pll_rr(AR934X_PLL_CPU_CONFIG_REG);
-+ pll = __raw_readl(pll_base + AR934X_PLL_CPU_CONFIG_REG);
- out_div = (pll >> AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
- AR934X_PLL_CPU_CONFIG_OUTDIV_MASK;
- ref_div = (pll >> AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
-@@ -292,7 +292,7 @@ static void __init ar934x_clocks_init(vo
- AR934X_SRIF_DPLL1_REFDIV_MASK;
- frac = 1 << 18;
- } else {
-- pll = ath79_pll_rr(AR934X_PLL_DDR_CONFIG_REG);
-+ pll = __raw_readl(pll_base + AR934X_PLL_DDR_CONFIG_REG);
- out_div = (pll >> AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
- AR934X_PLL_DDR_CONFIG_OUTDIV_MASK;
- ref_div = (pll >> AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
-@@ -307,7 +307,7 @@ static void __init ar934x_clocks_init(vo
- ddr_pll = ar934x_get_pll_freq(ref_rate, ref_div, nint,
- nfrac, frac, out_div);
-
-- clk_ctrl = ath79_pll_rr(AR934X_PLL_CPU_DDR_CLK_CTRL_REG);
-+ clk_ctrl = __raw_readl(pll_base + AR934X_PLL_CPU_DDR_CLK_CTRL_REG);
-
- postdiv = (clk_ctrl >> AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_SHIFT) &
- AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MASK;
-@@ -347,7 +347,7 @@ static void __init ar934x_clocks_init(vo
- iounmap(dpll_base);
- }
-
--static void __init qca953x_clocks_init(void)
-+static void __init qca953x_clocks_init(void __iomem *pll_base)
- {
- unsigned long ref_rate;
- unsigned long cpu_rate;
-@@ -363,7 +363,7 @@ static void __init qca953x_clocks_init(v
- else
- ref_rate = 25 * 1000 * 1000;
-
-- pll = ath79_pll_rr(QCA953X_PLL_CPU_CONFIG_REG);
-+ pll = __raw_readl(pll_base + QCA953X_PLL_CPU_CONFIG_REG);
- out_div = (pll >> QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
- QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK;
- ref_div = (pll >> QCA953X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
-@@ -377,7 +377,7 @@ static void __init qca953x_clocks_init(v
- cpu_pll += frac * (ref_rate >> 6) / ref_div;
- cpu_pll /= (1 << out_div);
-
-- pll = ath79_pll_rr(QCA953X_PLL_DDR_CONFIG_REG);
-+ pll = __raw_readl(pll_base + QCA953X_PLL_DDR_CONFIG_REG);
- out_div = (pll >> QCA953X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
- QCA953X_PLL_DDR_CONFIG_OUTDIV_MASK;
- ref_div = (pll >> QCA953X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
-@@ -391,7 +391,7 @@ static void __init qca953x_clocks_init(v
- ddr_pll += frac * (ref_rate >> 6) / (ref_div << 4);
- ddr_pll /= (1 << out_div);
-
-- clk_ctrl = ath79_pll_rr(QCA953X_PLL_CLK_CTRL_REG);
-+ clk_ctrl = __raw_readl(pll_base + QCA953X_PLL_CLK_CTRL_REG);
-
- postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
- QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
-@@ -429,7 +429,7 @@ static void __init qca953x_clocks_init(v
- ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
- }
-
--static void __init qca955x_clocks_init(void)
-+static void __init qca955x_clocks_init(void __iomem *pll_base)
- {
- unsigned long ref_rate;
- unsigned long cpu_rate;
-@@ -445,7 +445,7 @@ static void __init qca955x_clocks_init(v
- else
- ref_rate = 25 * 1000 * 1000;
-
-- pll = ath79_pll_rr(QCA955X_PLL_CPU_CONFIG_REG);
-+ pll = __raw_readl(pll_base + QCA955X_PLL_CPU_CONFIG_REG);
- out_div = (pll >> QCA955X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
- QCA955X_PLL_CPU_CONFIG_OUTDIV_MASK;
- ref_div = (pll >> QCA955X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
-@@ -459,7 +459,7 @@ static void __init qca955x_clocks_init(v
- cpu_pll += frac * ref_rate / (ref_div * (1 << 6));
- cpu_pll /= (1 << out_div);
-
-- pll = ath79_pll_rr(QCA955X_PLL_DDR_CONFIG_REG);
-+ pll = __raw_readl(pll_base + QCA955X_PLL_DDR_CONFIG_REG);
- out_div = (pll >> QCA955X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
- QCA955X_PLL_DDR_CONFIG_OUTDIV_MASK;
- ref_div = (pll >> QCA955X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
-@@ -473,7 +473,7 @@ static void __init qca955x_clocks_init(v
- ddr_pll += frac * ref_rate / (ref_div * (1 << 10));
- ddr_pll /= (1 << out_div);
-
-- clk_ctrl = ath79_pll_rr(QCA955X_PLL_CLK_CTRL_REG);
-+ clk_ctrl = __raw_readl(pll_base + QCA955X_PLL_CLK_CTRL_REG);
-
- postdiv = (clk_ctrl >> QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
- QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
-@@ -511,7 +511,7 @@ static void __init qca955x_clocks_init(v
- ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
- }
-
--static void __init qca956x_clocks_init(void)
-+static void __init qca956x_clocks_init(void __iomem *pll_base)
- {
- unsigned long ref_rate;
- unsigned long cpu_rate;
-@@ -537,13 +537,13 @@ static void __init qca956x_clocks_init(v
- else
- ref_rate = 25 * 1000 * 1000;
-
-- pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG_REG);
-+ pll = __raw_readl(pll_base + QCA956X_PLL_CPU_CONFIG_REG);
- out_div = (pll >> QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
- QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK;
- ref_div = (pll >> QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT) &
- QCA956X_PLL_CPU_CONFIG_REFDIV_MASK;
-
-- pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG1_REG);
-+ pll = __raw_readl(pll_base + QCA956X_PLL_CPU_CONFIG1_REG);
- nint = (pll >> QCA956X_PLL_CPU_CONFIG1_NINT_SHIFT) &
- QCA956X_PLL_CPU_CONFIG1_NINT_MASK;
- hfrac = (pll >> QCA956X_PLL_CPU_CONFIG1_NFRAC_H_SHIFT) &
-@@ -556,12 +556,12 @@ static void __init qca956x_clocks_init(v
- cpu_pll += (hfrac >> 13) * ref_rate / ref_div;
- cpu_pll /= (1 << out_div);
-
-- pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG_REG);
-+ pll = __raw_readl(pll_base + QCA956X_PLL_DDR_CONFIG_REG);
- out_div = (pll >> QCA956X_PLL_DDR_CONFIG_OUTDIV_SHIFT) &
- QCA956X_PLL_DDR_CONFIG_OUTDIV_MASK;
- ref_div = (pll >> QCA956X_PLL_DDR_CONFIG_REFDIV_SHIFT) &
- QCA956X_PLL_DDR_CONFIG_REFDIV_MASK;
-- pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG1_REG);
-+ pll = __raw_readl(pll_base + QCA956X_PLL_DDR_CONFIG1_REG);
- nint = (pll >> QCA956X_PLL_DDR_CONFIG1_NINT_SHIFT) &
- QCA956X_PLL_DDR_CONFIG1_NINT_MASK;
- hfrac = (pll >> QCA956X_PLL_DDR_CONFIG1_NFRAC_H_SHIFT) &
-@@ -574,7 +574,7 @@ static void __init qca956x_clocks_init(v
- ddr_pll += (hfrac >> 13) * ref_rate / ref_div;
- ddr_pll /= (1 << out_div);
-
-- clk_ctrl = ath79_pll_rr(QCA956X_PLL_CLK_CTRL_REG);
-+ clk_ctrl = __raw_readl(pll_base + QCA956X_PLL_CLK_CTRL_REG);
-
- postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) &
- QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_MASK;
-@@ -618,19 +618,19 @@ void __init ath79_clocks_init(void)
- const char *uart;
-
- if (soc_is_ar71xx())
-- ar71xx_clocks_init();
-+ ar71xx_clocks_init(ath79_pll_base);
- else if (soc_is_ar724x() || soc_is_ar913x())
-- ar724x_clocks_init();
-+ ar724x_clocks_init(ath79_pll_base);
- else if (soc_is_ar933x())
-- ar933x_clocks_init();
-+ ar933x_clocks_init(ath79_pll_base);
- else if (soc_is_ar934x())
-- ar934x_clocks_init();
-+ ar934x_clocks_init(ath79_pll_base);
- else if (soc_is_qca953x())
-- qca953x_clocks_init();
-+ qca953x_clocks_init(ath79_pll_base);
- else if (soc_is_qca955x())
-- qca955x_clocks_init();
-+ qca955x_clocks_init(ath79_pll_base);
- else if (soc_is_qca956x() || soc_is_tp9343())
-- qca956x_clocks_init();
-+ qca956x_clocks_init(ath79_pll_base);
- else
- BUG();
-
+++ /dev/null
-From 5fadb2544ed0bb72ddddd846aa303bb9ed2d211c Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Tue, 6 Mar 2018 13:24:07 +0100
-Subject: [PATCH 24/33] MIPS: ath79: make specifying the reference clock in DT
- optional
-
-It can be autodetected for many SoCs using the strapping options.
-If the clock is specified in DT, the autodetected value is ignored
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/ath79/clock.c | 84 +++++++++++++++++++++++--------------------------
- 1 file changed, 40 insertions(+), 44 deletions(-)
-
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -80,6 +80,18 @@ static struct clk * __init ath79_set_ff_
- return clk;
- }
-
-+static unsigned long __init ath79_setup_ref_clk(unsigned long rate)
-+{
-+ struct clk *clk = clks[ATH79_CLK_REF];
-+
-+ if (clk)
-+ rate = clk_get_rate(clk);
-+ else
-+ clk = ath79_set_clk(ATH79_CLK_REF, rate);
-+
-+ return rate;
-+}
-+
- static void __init ar71xx_clocks_init(void __iomem *pll_base)
- {
- unsigned long ref_rate;
-@@ -90,7 +102,7 @@ static void __init ar71xx_clocks_init(vo
- u32 freq;
- u32 div;
-
-- ref_rate = AR71XX_BASE_FREQ;
-+ ref_rate = ath79_setup_ref_clk(AR71XX_BASE_FREQ);
-
- pll = __raw_readl(pll_base + AR71XX_PLL_REG_CPU_CONFIG);
-
-@@ -106,16 +118,17 @@ static void __init ar71xx_clocks_init(vo
- div = (((pll >> AR71XX_AHB_DIV_SHIFT) & AR71XX_AHB_DIV_MASK) + 1) * 2;
- ahb_rate = cpu_rate / div;
-
-- ath79_set_clk(ATH79_CLK_REF, ref_rate);
- ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
- ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
- }
-
--static void __init ar724x_clk_init(struct clk *ref_clk, void __iomem *pll_base)
-+static void __init ar724x_clocks_init(void __iomem *pll_base)
- {
-- u32 pll;
- u32 mult, div, ddr_div, ahb_div;
-+ u32 pll;
-+
-+ ath79_setup_ref_clk(AR71XX_BASE_FREQ);
-
- pll = __raw_readl(pll_base + AR724X_PLL_REG_CPU_CONFIG);
-
-@@ -130,17 +143,9 @@ static void __init ar724x_clk_init(struc
- ath79_set_ff_clk(ATH79_CLK_AHB, "ref", mult, div * ahb_div);
- }
-
--static void __init ar724x_clocks_init(void __iomem *pll_base)
--{
-- struct clk *ref_clk;
--
-- ref_clk = ath79_set_clk(ATH79_CLK_REF, AR724X_BASE_FREQ);
--
-- ar724x_clk_init(ref_clk, pll_base);
--}
--
--static void __init ar9330_clk_init(struct clk *ref_clk, void __iomem *pll_base)
-+static void __init ar933x_clocks_init(void __iomem *pll_base)
- {
-+ unsigned long ref_rate;
- u32 clock_ctrl;
- u32 ref_div;
- u32 ninit_mul;
-@@ -149,6 +154,15 @@ static void __init ar9330_clk_init(struc
- u32 cpu_div;
- u32 ddr_div;
- u32 ahb_div;
-+ u32 t;
-+
-+ t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
-+ if (t & AR933X_BOOTSTRAP_REF_CLK_40)
-+ ref_rate = (40 * 1000 * 1000);
-+ else
-+ ref_rate = (25 * 1000 * 1000);
-+
-+ ath79_setup_ref_clk(ref_rate);
-
- clock_ctrl = __raw_readl(pll_base + AR933X_PLL_CLOCK_CTRL_REG);
- if (clock_ctrl & AR933X_PLL_CLOCK_CTRL_BYPASS) {
-@@ -197,23 +211,6 @@ static void __init ar9330_clk_init(struc
- ref_div * out_div * ahb_div);
- }
-
--static void __init ar933x_clocks_init(void __iomem *pll_base)
--{
-- struct clk *ref_clk;
-- unsigned long ref_rate;
-- u32 t;
--
-- t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
-- if (t & AR933X_BOOTSTRAP_REF_CLK_40)
-- ref_rate = (40 * 1000 * 1000);
-- else
-- ref_rate = (25 * 1000 * 1000);
--
-- ref_clk = ath79_set_clk(ATH79_CLK_REF, ref_rate);
--
-- ar9330_clk_init(ref_clk, ath79_pll_base);
--}
--
- static u32 __init ar934x_get_pll_freq(u32 ref, u32 ref_div, u32 nint, u32 nfrac,
- u32 frac, u32 out_div)
- {
-@@ -253,6 +250,8 @@ static void __init ar934x_clocks_init(vo
- else
- ref_rate = 25 * 1000 * 1000;
-
-+ ref_rate = ath79_setup_ref_clk(ref_rate);
-+
- pll = __raw_readl(dpll_base + AR934X_SRIF_CPU_DPLL2_REG);
- if (pll & AR934X_SRIF_DPLL2_LOCAL_PLL) {
- out_div = (pll >> AR934X_SRIF_DPLL2_OUTDIV_SHIFT) &
-@@ -339,7 +338,6 @@ static void __init ar934x_clocks_init(vo
- else
- ahb_rate = cpu_pll / (postdiv + 1);
-
-- ath79_set_clk(ATH79_CLK_REF, ref_rate);
- ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
- ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
-@@ -363,6 +361,8 @@ static void __init qca953x_clocks_init(v
- else
- ref_rate = 25 * 1000 * 1000;
-
-+ ref_rate = ath79_setup_ref_clk(ref_rate);
-+
- pll = __raw_readl(pll_base + QCA953X_PLL_CPU_CONFIG_REG);
- out_div = (pll >> QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
- QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK;
-@@ -423,7 +423,6 @@ static void __init qca953x_clocks_init(v
- else
- ahb_rate = cpu_pll / (postdiv + 1);
-
-- ath79_set_clk(ATH79_CLK_REF, ref_rate);
- ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
- ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
-@@ -445,6 +444,8 @@ static void __init qca955x_clocks_init(v
- else
- ref_rate = 25 * 1000 * 1000;
-
-+ ref_rate = ath79_setup_ref_clk(ref_rate);
-+
- pll = __raw_readl(pll_base + QCA955X_PLL_CPU_CONFIG_REG);
- out_div = (pll >> QCA955X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
- QCA955X_PLL_CPU_CONFIG_OUTDIV_MASK;
-@@ -505,7 +506,6 @@ static void __init qca955x_clocks_init(v
- else
- ahb_rate = cpu_pll / (postdiv + 1);
-
-- ath79_set_clk(ATH79_CLK_REF, ref_rate);
- ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
- ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
-@@ -537,6 +537,8 @@ static void __init qca956x_clocks_init(v
- else
- ref_rate = 25 * 1000 * 1000;
-
-+ ref_rate = ath79_setup_ref_clk(ref_rate);
-+
- pll = __raw_readl(pll_base + QCA956X_PLL_CPU_CONFIG_REG);
- out_div = (pll >> QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT) &
- QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK;
-@@ -606,7 +608,6 @@ static void __init qca956x_clocks_init(v
- else
- ahb_rate = cpu_pll / (postdiv + 1);
-
-- ath79_set_clk(ATH79_CLK_REF, ref_rate);
- ath79_set_clk(ATH79_CLK_CPU, cpu_rate);
- ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
-@@ -682,10 +683,8 @@ static void __init ath79_clocks_init_dt_
- void __iomem *pll_base;
-
- ref_clk = of_clk_get(np, 0);
-- if (IS_ERR(ref_clk)) {
-- pr_err("%pOF: of_clk_get failed\n", np);
-- goto err;
-- }
-+ if (!IS_ERR(ref_clk))
-+ clks[ATH79_CLK_REF] = ref_clk;
-
- pll_base = of_iomap(np, 0);
- if (!pll_base) {
-@@ -694,9 +693,9 @@ static void __init ath79_clocks_init_dt_
- }
-
- if (of_device_is_compatible(np, "qca,ar9130-pll"))
-- ar724x_clk_init(ref_clk, pll_base);
-+ ar724x_clocks_init(pll_base);
- else if (of_device_is_compatible(np, "qca,ar9330-pll"))
-- ar9330_clk_init(ref_clk, pll_base);
-+ ar933x_clocks_init(pll_base);
- else {
- pr_err("%pOF: could not find any appropriate clk_init()\n", np);
- goto err_iounmap;
-@@ -714,9 +713,6 @@ err_iounmap:
-
- err_clk:
- clk_put(ref_clk);
--
--err:
-- return;
- }
- CLK_OF_DECLARE(ar9130_clk, "qca,ar9130-pll", ath79_clocks_init_dt_ng);
- CLK_OF_DECLARE(ar9330_clk, "qca,ar9330-pll", ath79_clocks_init_dt_ng);
+++ /dev/null
-From 6325626de001df98aebe51f3008b1aca05798d19 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Tue, 6 Mar 2018 13:26:27 +0100
-Subject: [PATCH 25/33] MIPS: ath79: support setting up clock via DT on all SoC
- types
-
-Use the same functions as the legacy code
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/ath79/clock.c | 39 ++++++++++++++++++++++-----------------
- 1 file changed, 22 insertions(+), 17 deletions(-)
-
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -669,16 +669,6 @@ ath79_get_sys_clk_rate(const char *id)
- #ifdef CONFIG_OF
- static void __init ath79_clocks_init_dt(struct device_node *np)
- {
-- of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
--}
--
--CLK_OF_DECLARE(ar7100, "qca,ar7100-pll", ath79_clocks_init_dt);
--CLK_OF_DECLARE(ar7240, "qca,ar7240-pll", ath79_clocks_init_dt);
--CLK_OF_DECLARE(ar9340, "qca,ar9340-pll", ath79_clocks_init_dt);
--CLK_OF_DECLARE(ar9550, "qca,qca9550-pll", ath79_clocks_init_dt);
--
--static void __init ath79_clocks_init_dt_ng(struct device_node *np)
--{
- struct clk *ref_clk;
- void __iomem *pll_base;
-
-@@ -692,14 +682,21 @@ static void __init ath79_clocks_init_dt_
- goto err_clk;
- }
-
-- if (of_device_is_compatible(np, "qca,ar9130-pll"))
-+ if (of_device_is_compatible(np, "qca,ar7100-pll"))
-+ ar71xx_clocks_init(pll_base);
-+ else if (of_device_is_compatible(np, "qca,ar7240-pll") ||
-+ of_device_is_compatible(np, "qca,ar9130-pll"))
- ar724x_clocks_init(pll_base);
- else if (of_device_is_compatible(np, "qca,ar9330-pll"))
- ar933x_clocks_init(pll_base);
-- else {
-- pr_err("%pOF: could not find any appropriate clk_init()\n", np);
-- goto err_iounmap;
-- }
-+ else if (of_device_is_compatible(np, "qca,ar9340-pll"))
-+ ar934x_clocks_init(pll_base);
-+ else if (of_device_is_compatible(np, "qca,qca9530-pll"))
-+ qca953x_clocks_init(pll_base);
-+ else if (of_device_is_compatible(np, "qca,qca9550-pll"))
-+ qca955x_clocks_init(pll_base);
-+ else if (of_device_is_compatible(np, "qca,qca9560-pll"))
-+ qca956x_clocks_init(pll_base);
-
- if (of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data)) {
- pr_err("%pOF: could not register clk provider\n", np);
-@@ -714,6 +711,14 @@ err_iounmap:
- err_clk:
- clk_put(ref_clk);
- }
--CLK_OF_DECLARE(ar9130_clk, "qca,ar9130-pll", ath79_clocks_init_dt_ng);
--CLK_OF_DECLARE(ar9330_clk, "qca,ar9330-pll", ath79_clocks_init_dt_ng);
-+
-+CLK_OF_DECLARE(ar7100_clk, "qca,ar7100-pll", ath79_clocks_init_dt);
-+CLK_OF_DECLARE(ar7240_clk, "qca,ar7240-pll", ath79_clocks_init_dt);
-+CLK_OF_DECLARE(ar9130_clk, "qca,ar9130-pll", ath79_clocks_init_dt);
-+CLK_OF_DECLARE(ar9330_clk, "qca,ar9330-pll", ath79_clocks_init_dt);
-+CLK_OF_DECLARE(ar9340_clk, "qca,ar9340-pll", ath79_clocks_init_dt);
-+CLK_OF_DECLARE(ar9530_clk, "qca,qca9530-pll", ath79_clocks_init_dt);
-+CLK_OF_DECLARE(ar9550_clk, "qca,qca9550-pll", ath79_clocks_init_dt);
-+CLK_OF_DECLARE(ar9560_clk, "qca,qca9560-pll", ath79_clocks_init_dt);
-+
- #endif
+++ /dev/null
-From 78538d673801902108797f2c813e70cfbce280c9 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Tue, 6 Mar 2018 13:27:28 +0100
-Subject: [PATCH 26/33] MIPS: ath79: export switch MDIO reference clock
-
-On AR934x, the MDIO reference clock can be configured to a fixed 100 MHz
-clock. If that feature is not used, it defaults to the main reference
-clock, like on all other SoC.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/ath79/clock.c | 8 ++++++++
- include/dt-bindings/clock/ath79-clk.h | 3 ++-
- 2 files changed, 10 insertions(+), 1 deletion(-)
-
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -42,6 +42,7 @@ static const char * const clk_names[ATH7
- [ATH79_CLK_DDR] = "ddr",
- [ATH79_CLK_AHB] = "ahb",
- [ATH79_CLK_REF] = "ref",
-+ [ATH79_CLK_MDIO] = "mdio",
- };
-
- static const char * __init ath79_clk_name(int type)
-@@ -342,6 +343,10 @@ static void __init ar934x_clocks_init(vo
- ath79_set_clk(ATH79_CLK_DDR, ddr_rate);
- ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
-
-+ clk_ctrl = __raw_readl(pll_base + AR934X_PLL_SWITCH_CLOCK_CONTROL_REG);
-+ if (clk_ctrl & AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL)
-+ ath79_set_clk(ATH79_CLK_MDIO, 100 * 1000 * 1000);
-+
- iounmap(dpll_base);
- }
-
-@@ -698,6 +703,9 @@ static void __init ath79_clocks_init_dt(
- else if (of_device_is_compatible(np, "qca,qca9560-pll"))
- qca956x_clocks_init(pll_base);
-
-+ if (!clks[ATH79_CLK_MDIO])
-+ clks[ATH79_CLK_MDIO] = clks[ATH79_CLK_REF];
-+
- if (of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data)) {
- pr_err("%pOF: could not register clk provider\n", np);
- goto err_iounmap;
---- a/include/dt-bindings/clock/ath79-clk.h
-+++ b/include/dt-bindings/clock/ath79-clk.h
-@@ -14,7 +14,8 @@
- #define ATH79_CLK_DDR 1
- #define ATH79_CLK_AHB 2
- #define ATH79_CLK_REF 3
-+#define ATH79_CLK_MDIO 4
-
--#define ATH79_CLK_END 4
-+#define ATH79_CLK_END 5
-
- #endif /* __DT_BINDINGS_ATH79_CLK_H */
+++ /dev/null
-From 3765b1f79593a0a9098ed15e48074c95403a53ee Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Sat, 23 Jun 2018 15:05:08 +0200
-Subject: [PATCH 27/33] MIPS: ath79: drop legacy IRQ code
-
-With the target now being fully OF based, we can drop the legacy IRQ code.
-All IRQs are now handled via the new irqchip drivers.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/ath79/Makefile | 2 +-
- arch/mips/ath79/irq.c | 169 -------------------------------
- arch/mips/ath79/setup.c | 6 ++
- arch/mips/include/asm/mach-ath79/ath79.h | 4 -
- 4 files changed, 7 insertions(+), 174 deletions(-)
- delete mode 100644 arch/mips/ath79/irq.c
-
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -8,7 +8,7 @@
- # under the terms of the GNU General Public License version 2 as published
- # by the Free Software Foundation.
-
--obj-y := prom.o setup.o irq.o common.o clock.o
-+obj-y := prom.o setup.o common.o clock.o
-
- obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
- obj-$(CONFIG_PCI) += pci.o
---- a/arch/mips/ath79/irq.c
-+++ /dev/null
-@@ -1,169 +0,0 @@
--/*
-- * Atheros AR71xx/AR724x/AR913x specific interrupt handling
-- *
-- * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
-- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#include <linux/kernel.h>
--#include <linux/init.h>
--#include <linux/interrupt.h>
--#include <linux/irqchip.h>
--#include <linux/of_irq.h>
--
--#include <asm/irq_cpu.h>
--#include <asm/mipsregs.h>
--
--#include <asm/mach-ath79/ath79.h>
--#include <asm/mach-ath79/ar71xx_regs.h>
--#include "common.h"
--#include "machtypes.h"
--
--
--static void ar934x_ip2_irq_dispatch(struct irq_desc *desc)
--{
-- u32 status;
--
-- status = ath79_reset_rr(AR934X_RESET_REG_PCIE_WMAC_INT_STATUS);
--
-- if (status & AR934X_PCIE_WMAC_INT_PCIE_ALL) {
-- ath79_ddr_wb_flush(3);
-- generic_handle_irq(ATH79_IP2_IRQ(0));
-- } else if (status & AR934X_PCIE_WMAC_INT_WMAC_ALL) {
-- ath79_ddr_wb_flush(4);
-- generic_handle_irq(ATH79_IP2_IRQ(1));
-- } else {
-- spurious_interrupt();
-- }
--}
--
--static void ar934x_ip2_irq_init(void)
--{
-- int i;
--
-- for (i = ATH79_IP2_IRQ_BASE;
-- i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
-- irq_set_chip_and_handler(i, &dummy_irq_chip,
-- handle_level_irq);
--
-- irq_set_chained_handler(ATH79_CPU_IRQ(2), ar934x_ip2_irq_dispatch);
--}
--
--static void qca955x_ip2_irq_dispatch(struct irq_desc *desc)
--{
-- u32 status;
--
-- status = ath79_reset_rr(QCA955X_RESET_REG_EXT_INT_STATUS);
-- status &= QCA955X_EXT_INT_PCIE_RC1_ALL | QCA955X_EXT_INT_WMAC_ALL;
--
-- if (status == 0) {
-- spurious_interrupt();
-- return;
-- }
--
-- if (status & QCA955X_EXT_INT_PCIE_RC1_ALL) {
-- /* TODO: flush DDR? */
-- generic_handle_irq(ATH79_IP2_IRQ(0));
-- }
--
-- if (status & QCA955X_EXT_INT_WMAC_ALL) {
-- /* TODO: flush DDR? */
-- generic_handle_irq(ATH79_IP2_IRQ(1));
-- }
--}
--
--static void qca955x_ip3_irq_dispatch(struct irq_desc *desc)
--{
-- u32 status;
--
-- status = ath79_reset_rr(QCA955X_RESET_REG_EXT_INT_STATUS);
-- status &= QCA955X_EXT_INT_PCIE_RC2_ALL |
-- QCA955X_EXT_INT_USB1 |
-- QCA955X_EXT_INT_USB2;
--
-- if (status == 0) {
-- spurious_interrupt();
-- return;
-- }
--
-- if (status & QCA955X_EXT_INT_USB1) {
-- /* TODO: flush DDR? */
-- generic_handle_irq(ATH79_IP3_IRQ(0));
-- }
--
-- if (status & QCA955X_EXT_INT_USB2) {
-- /* TODO: flush DDR? */
-- generic_handle_irq(ATH79_IP3_IRQ(1));
-- }
--
-- if (status & QCA955X_EXT_INT_PCIE_RC2_ALL) {
-- /* TODO: flush DDR? */
-- generic_handle_irq(ATH79_IP3_IRQ(2));
-- }
--}
--
--static void qca955x_irq_init(void)
--{
-- int i;
--
-- for (i = ATH79_IP2_IRQ_BASE;
-- i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++)
-- irq_set_chip_and_handler(i, &dummy_irq_chip,
-- handle_level_irq);
--
-- irq_set_chained_handler(ATH79_CPU_IRQ(2), qca955x_ip2_irq_dispatch);
--
-- for (i = ATH79_IP3_IRQ_BASE;
-- i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++)
-- irq_set_chip_and_handler(i, &dummy_irq_chip,
-- handle_level_irq);
--
-- irq_set_chained_handler(ATH79_CPU_IRQ(3), qca955x_ip3_irq_dispatch);
--}
--
--void __init arch_init_irq(void)
--{
-- unsigned irq_wb_chan2 = -1;
-- unsigned irq_wb_chan3 = -1;
-- bool misc_is_ar71xx;
--
-- if (mips_machtype == ATH79_MACH_GENERIC_OF) {
-- irqchip_init();
-- return;
-- }
--
-- if (soc_is_ar71xx() || soc_is_ar724x() ||
-- soc_is_ar913x() || soc_is_ar933x()) {
-- irq_wb_chan2 = 3;
-- irq_wb_chan3 = 2;
-- } else if (soc_is_ar934x()) {
-- irq_wb_chan3 = 2;
-- }
--
-- ath79_cpu_irq_init(irq_wb_chan2, irq_wb_chan3);
--
-- if (soc_is_ar71xx() || soc_is_ar913x())
-- misc_is_ar71xx = true;
-- else if (soc_is_ar724x() ||
-- soc_is_ar933x() ||
-- soc_is_ar934x() ||
-- soc_is_qca955x())
-- misc_is_ar71xx = false;
-- else
-- BUG();
-- ath79_misc_irq_init(
-- ath79_reset_base + AR71XX_RESET_REG_MISC_INT_STATUS,
-- ATH79_CPU_IRQ(6), ATH79_MISC_IRQ_BASE, misc_is_ar71xx);
--
-- if (soc_is_ar934x())
-- ar934x_ip2_irq_init();
-- else if (soc_is_qca955x())
-- qca955x_irq_init();
--}
---- a/arch/mips/ath79/setup.c
-+++ b/arch/mips/ath79/setup.c
-@@ -19,6 +19,7 @@
- #include <linux/clk.h>
- #include <linux/clk-provider.h>
- #include <linux/of_fdt.h>
-+#include <linux/irqchip.h>
-
- #include <asm/bootinfo.h>
- #include <asm/idle.h>
-@@ -305,6 +306,11 @@ void __init plat_time_init(void)
- mips_hpt_frequency = cpu_clk_rate / 2;
- }
-
-+void __init arch_init_irq(void)
-+{
-+ irqchip_init();
-+}
-+
- static int __init ath79_setup(void)
- {
- if (mips_machtype == ATH79_MACH_GENERIC_OF)
---- a/arch/mips/include/asm/mach-ath79/ath79.h
-+++ b/arch/mips/include/asm/mach-ath79/ath79.h
-@@ -178,8 +178,4 @@ static inline u32 ath79_reset_rr(unsigne
- void ath79_device_reset_set(u32 mask);
- void ath79_device_reset_clear(u32 mask);
-
--void ath79_cpu_irq_init(unsigned irq_wb_chan2, unsigned irq_wb_chan3);
--void ath79_misc_irq_init(void __iomem *regs, int irq,
-- int irq_base, bool is_ar71xx);
--
- #endif /* __ASM_MACH_ATH79_H */
+++ /dev/null
-From badf28957b6dc400dff27bd23ba2ae75d9514be5 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Sat, 23 Jun 2018 15:04:09 +0200
-Subject: [PATCH 28/33] MIPS: ath79: drop machfiles
-
-With the target now being fully OF based, we can drop the legacy mach
-files. Boards can now boot fully of devicetree files.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/Kconfig | 1 -
- arch/mips/ath79/Kconfig | 73 -------------------
- arch/mips/ath79/Makefile | 10 ---
- arch/mips/ath79/clock.c | 1 -
- arch/mips/ath79/mach-ap121.c | 92 ------------------------
- arch/mips/ath79/mach-ap136.c | 156 -----------------------------------------
- arch/mips/ath79/mach-ap81.c | 100 --------------------------
- arch/mips/ath79/mach-db120.c | 136 -----------------------------------
- arch/mips/ath79/mach-pb44.c | 128 ---------------------------------
- arch/mips/ath79/mach-ubnt-xm.c | 126 ---------------------------------
- arch/mips/ath79/machtypes.h | 28 --------
- arch/mips/ath79/setup.c | 77 +++-----------------
- 12 files changed, 9 insertions(+), 919 deletions(-)
- delete mode 100644 arch/mips/ath79/mach-ap121.c
- delete mode 100644 arch/mips/ath79/mach-ap136.c
- delete mode 100644 arch/mips/ath79/mach-ap81.c
- delete mode 100644 arch/mips/ath79/mach-db120.c
- delete mode 100644 arch/mips/ath79/mach-pb44.c
- delete mode 100644 arch/mips/ath79/mach-ubnt-xm.c
- delete mode 100644 arch/mips/ath79/machtypes.h
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -202,7 +202,6 @@ config ATH79
- select COMMON_CLK
- select CLKDEV_LOOKUP
- select IRQ_MIPS_CPU
-- select MIPS_MACHINE
- select SYS_HAS_CPU_MIPS32_R2
- select SYS_HAS_EARLY_PRINTK
- select SYS_SUPPORTS_32BIT_KERNEL
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -1,79 +1,6 @@
- # SPDX-License-Identifier: GPL-2.0
- if ATH79
-
--menu "Atheros AR71XX/AR724X/AR913X machine selection"
--
--config ATH79_MACH_AP121
-- bool "Atheros AP121 reference board"
-- select SOC_AR933X
-- select ATH79_DEV_GPIO_BUTTONS
-- select ATH79_DEV_LEDS_GPIO
-- select ATH79_DEV_SPI
-- select ATH79_DEV_USB
-- select ATH79_DEV_WMAC
-- help
-- Say 'Y' here if you want your kernel to support the
-- Atheros AP121 reference board.
--
--config ATH79_MACH_AP136
-- bool "Atheros AP136 reference board"
-- select SOC_QCA955X
-- select ATH79_DEV_GPIO_BUTTONS
-- select ATH79_DEV_LEDS_GPIO
-- select ATH79_DEV_SPI
-- select ATH79_DEV_USB
-- select ATH79_DEV_WMAC
-- help
-- Say 'Y' here if you want your kernel to support the
-- Atheros AP136 reference board.
--
--config ATH79_MACH_AP81
-- bool "Atheros AP81 reference board"
-- select SOC_AR913X
-- select ATH79_DEV_GPIO_BUTTONS
-- select ATH79_DEV_LEDS_GPIO
-- select ATH79_DEV_SPI
-- select ATH79_DEV_USB
-- select ATH79_DEV_WMAC
-- help
-- Say 'Y' here if you want your kernel to support the
-- Atheros AP81 reference board.
--
--config ATH79_MACH_DB120
-- bool "Atheros DB120 reference board"
-- select SOC_AR934X
-- select ATH79_DEV_GPIO_BUTTONS
-- select ATH79_DEV_LEDS_GPIO
-- select ATH79_DEV_SPI
-- select ATH79_DEV_USB
-- select ATH79_DEV_WMAC
-- help
-- Say 'Y' here if you want your kernel to support the
-- Atheros DB120 reference board.
--
--config ATH79_MACH_PB44
-- bool "Atheros PB44 reference board"
-- select SOC_AR71XX
-- select ATH79_DEV_GPIO_BUTTONS
-- select ATH79_DEV_LEDS_GPIO
-- select ATH79_DEV_SPI
-- select ATH79_DEV_USB
-- help
-- Say 'Y' here if you want your kernel to support the
-- Atheros PB44 reference board.
--
--config ATH79_MACH_UBNT_XM
-- bool "Ubiquiti Networks XM (rev 1.0) board"
-- select SOC_AR724X
-- select ATH79_DEV_GPIO_BUTTONS
-- select ATH79_DEV_LEDS_GPIO
-- select ATH79_DEV_SPI
-- help
-- Say 'Y' here if you want your kernel to support the
-- Ubiquiti Networks XM (rev 1.0) board.
--
--endmenu
--
- config SOC_AR71XX
- select HW_HAS_PCI
- def_bool n
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -22,13 +22,3 @@ obj-$(CONFIG_ATH79_DEV_LEDS_GPIO) += dev
- obj-$(CONFIG_ATH79_DEV_SPI) += dev-spi.o
- obj-$(CONFIG_ATH79_DEV_USB) += dev-usb.o
- obj-$(CONFIG_ATH79_DEV_WMAC) += dev-wmac.o
--
--#
--# Machines
--#
--obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o
--obj-$(CONFIG_ATH79_MACH_AP136) += mach-ap136.o
--obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o
--obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o
--obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o
--obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -26,7 +26,6 @@
- #include <asm/mach-ath79/ath79.h>
- #include <asm/mach-ath79/ar71xx_regs.h>
- #include "common.h"
--#include "machtypes.h"
-
- #define AR71XX_BASE_FREQ 40000000
- #define AR724X_BASE_FREQ 40000000
---- a/arch/mips/ath79/mach-ap121.c
-+++ /dev/null
-@@ -1,92 +0,0 @@
--/*
-- * Atheros AP121 board support
-- *
-- * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#include "machtypes.h"
--#include "dev-gpio-buttons.h"
--#include "dev-leds-gpio.h"
--#include "dev-spi.h"
--#include "dev-usb.h"
--#include "dev-wmac.h"
--
--#define AP121_GPIO_LED_WLAN 0
--#define AP121_GPIO_LED_USB 1
--
--#define AP121_GPIO_BTN_JUMPSTART 11
--#define AP121_GPIO_BTN_RESET 12
--
--#define AP121_KEYS_POLL_INTERVAL 20 /* msecs */
--#define AP121_KEYS_DEBOUNCE_INTERVAL (3 * AP121_KEYS_POLL_INTERVAL)
--
--#define AP121_CAL_DATA_ADDR 0x1fff1000
--
--static struct gpio_led ap121_leds_gpio[] __initdata = {
-- {
-- .name = "ap121:green:usb",
-- .gpio = AP121_GPIO_LED_USB,
-- .active_low = 0,
-- },
-- {
-- .name = "ap121:green:wlan",
-- .gpio = AP121_GPIO_LED_WLAN,
-- .active_low = 0,
-- },
--};
--
--static struct gpio_keys_button ap121_gpio_keys[] __initdata = {
-- {
-- .desc = "jumpstart button",
-- .type = EV_KEY,
-- .code = KEY_WPS_BUTTON,
-- .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
-- .gpio = AP121_GPIO_BTN_JUMPSTART,
-- .active_low = 1,
-- },
-- {
-- .desc = "reset button",
-- .type = EV_KEY,
-- .code = KEY_RESTART,
-- .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL,
-- .gpio = AP121_GPIO_BTN_RESET,
-- .active_low = 1,
-- }
--};
--
--static struct spi_board_info ap121_spi_info[] = {
-- {
-- .bus_num = 0,
-- .chip_select = 0,
-- .max_speed_hz = 25000000,
-- .modalias = "mx25l1606e",
-- }
--};
--
--static struct ath79_spi_platform_data ap121_spi_data = {
-- .bus_num = 0,
-- .num_chipselect = 1,
--};
--
--static void __init ap121_setup(void)
--{
-- u8 *cal_data = (u8 *) KSEG1ADDR(AP121_CAL_DATA_ADDR);
--
-- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_leds_gpio),
-- ap121_leds_gpio);
-- ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL,
-- ARRAY_SIZE(ap121_gpio_keys),
-- ap121_gpio_keys);
--
-- ath79_register_spi(&ap121_spi_data, ap121_spi_info,
-- ARRAY_SIZE(ap121_spi_info));
-- ath79_register_usb();
-- ath79_register_wmac(cal_data);
--}
--
--MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board",
-- ap121_setup);
---- a/arch/mips/ath79/mach-ap136.c
-+++ /dev/null
-@@ -1,156 +0,0 @@
--/*
-- * Qualcomm Atheros AP136 reference board support
-- *
-- * Copyright (c) 2012 Qualcomm Atheros
-- * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
-- *
-- * Permission to use, copy, modify, and/or distribute this software for any
-- * purpose with or without fee is hereby granted, provided that the above
-- * copyright notice and this permission notice appear in all copies.
-- *
-- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-- *
-- */
--
--#include <linux/pci.h>
--#include <linux/ath9k_platform.h>
--
--#include "machtypes.h"
--#include "dev-gpio-buttons.h"
--#include "dev-leds-gpio.h"
--#include "dev-spi.h"
--#include "dev-usb.h"
--#include "dev-wmac.h"
--#include "pci.h"
--
--#define AP136_GPIO_LED_STATUS_RED 14
--#define AP136_GPIO_LED_STATUS_GREEN 19
--#define AP136_GPIO_LED_USB 4
--#define AP136_GPIO_LED_WLAN_2G 13
--#define AP136_GPIO_LED_WLAN_5G 12
--#define AP136_GPIO_LED_WPS_RED 15
--#define AP136_GPIO_LED_WPS_GREEN 20
--
--#define AP136_GPIO_BTN_WPS 16
--#define AP136_GPIO_BTN_RFKILL 21
--
--#define AP136_KEYS_POLL_INTERVAL 20 /* msecs */
--#define AP136_KEYS_DEBOUNCE_INTERVAL (3 * AP136_KEYS_POLL_INTERVAL)
--
--#define AP136_WMAC_CALDATA_OFFSET 0x1000
--#define AP136_PCIE_CALDATA_OFFSET 0x5000
--
--static struct gpio_led ap136_leds_gpio[] __initdata = {
-- {
-- .name = "qca:green:status",
-- .gpio = AP136_GPIO_LED_STATUS_GREEN,
-- .active_low = 1,
-- },
-- {
-- .name = "qca:red:status",
-- .gpio = AP136_GPIO_LED_STATUS_RED,
-- .active_low = 1,
-- },
-- {
-- .name = "qca:green:wps",
-- .gpio = AP136_GPIO_LED_WPS_GREEN,
-- .active_low = 1,
-- },
-- {
-- .name = "qca:red:wps",
-- .gpio = AP136_GPIO_LED_WPS_RED,
-- .active_low = 1,
-- },
-- {
-- .name = "qca:red:wlan-2g",
-- .gpio = AP136_GPIO_LED_WLAN_2G,
-- .active_low = 1,
-- },
-- {
-- .name = "qca:red:usb",
-- .gpio = AP136_GPIO_LED_USB,
-- .active_low = 1,
-- }
--};
--
--static struct gpio_keys_button ap136_gpio_keys[] __initdata = {
-- {
-- .desc = "WPS button",
-- .type = EV_KEY,
-- .code = KEY_WPS_BUTTON,
-- .debounce_interval = AP136_KEYS_DEBOUNCE_INTERVAL,
-- .gpio = AP136_GPIO_BTN_WPS,
-- .active_low = 1,
-- },
-- {
-- .desc = "RFKILL button",
-- .type = EV_KEY,
-- .code = KEY_RFKILL,
-- .debounce_interval = AP136_KEYS_DEBOUNCE_INTERVAL,
-- .gpio = AP136_GPIO_BTN_RFKILL,
-- .active_low = 1,
-- },
--};
--
--static struct spi_board_info ap136_spi_info[] = {
-- {
-- .bus_num = 0,
-- .chip_select = 0,
-- .max_speed_hz = 25000000,
-- .modalias = "mx25l6405d",
-- }
--};
--
--static struct ath79_spi_platform_data ap136_spi_data = {
-- .bus_num = 0,
-- .num_chipselect = 1,
--};
--
--#ifdef CONFIG_PCI
--static struct ath9k_platform_data ap136_ath9k_data;
--
--static int ap136_pci_plat_dev_init(struct pci_dev *dev)
--{
-- if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0)
-- dev->dev.platform_data = &ap136_ath9k_data;
--
-- return 0;
--}
--
--static void __init ap136_pci_init(u8 *eeprom)
--{
-- memcpy(ap136_ath9k_data.eeprom_data, eeprom,
-- sizeof(ap136_ath9k_data.eeprom_data));
--
-- ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init);
-- ath79_register_pci();
--}
--#else
--static inline void ap136_pci_init(u8 *eeprom) {}
--#endif /* CONFIG_PCI */
--
--static void __init ap136_setup(void)
--{
-- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
--
-- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio),
-- ap136_leds_gpio);
-- ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL,
-- ARRAY_SIZE(ap136_gpio_keys),
-- ap136_gpio_keys);
-- ath79_register_spi(&ap136_spi_data, ap136_spi_info,
-- ARRAY_SIZE(ap136_spi_info));
-- ath79_register_usb();
-- ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET);
-- ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET);
--}
--
--MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010",
-- "Atheros AP136-010 reference board",
-- ap136_setup);
---- a/arch/mips/ath79/mach-ap81.c
-+++ /dev/null
-@@ -1,100 +0,0 @@
--/*
-- * Atheros AP81 board support
-- *
-- * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
-- * Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#include "machtypes.h"
--#include "dev-wmac.h"
--#include "dev-gpio-buttons.h"
--#include "dev-leds-gpio.h"
--#include "dev-spi.h"
--#include "dev-usb.h"
--
--#define AP81_GPIO_LED_STATUS 1
--#define AP81_GPIO_LED_AOSS 3
--#define AP81_GPIO_LED_WLAN 6
--#define AP81_GPIO_LED_POWER 14
--
--#define AP81_GPIO_BTN_SW4 12
--#define AP81_GPIO_BTN_SW1 21
--
--#define AP81_KEYS_POLL_INTERVAL 20 /* msecs */
--#define AP81_KEYS_DEBOUNCE_INTERVAL (3 * AP81_KEYS_POLL_INTERVAL)
--
--#define AP81_CAL_DATA_ADDR 0x1fff1000
--
--static struct gpio_led ap81_leds_gpio[] __initdata = {
-- {
-- .name = "ap81:green:status",
-- .gpio = AP81_GPIO_LED_STATUS,
-- .active_low = 1,
-- }, {
-- .name = "ap81:amber:aoss",
-- .gpio = AP81_GPIO_LED_AOSS,
-- .active_low = 1,
-- }, {
-- .name = "ap81:green:wlan",
-- .gpio = AP81_GPIO_LED_WLAN,
-- .active_low = 1,
-- }, {
-- .name = "ap81:green:power",
-- .gpio = AP81_GPIO_LED_POWER,
-- .active_low = 1,
-- }
--};
--
--static struct gpio_keys_button ap81_gpio_keys[] __initdata = {
-- {
-- .desc = "sw1",
-- .type = EV_KEY,
-- .code = BTN_0,
-- .debounce_interval = AP81_KEYS_DEBOUNCE_INTERVAL,
-- .gpio = AP81_GPIO_BTN_SW1,
-- .active_low = 1,
-- } , {
-- .desc = "sw4",
-- .type = EV_KEY,
-- .code = BTN_1,
-- .debounce_interval = AP81_KEYS_DEBOUNCE_INTERVAL,
-- .gpio = AP81_GPIO_BTN_SW4,
-- .active_low = 1,
-- }
--};
--
--static struct spi_board_info ap81_spi_info[] = {
-- {
-- .bus_num = 0,
-- .chip_select = 0,
-- .max_speed_hz = 25000000,
-- .modalias = "m25p64",
-- }
--};
--
--static struct ath79_spi_platform_data ap81_spi_data = {
-- .bus_num = 0,
-- .num_chipselect = 1,
--};
--
--static void __init ap81_setup(void)
--{
-- u8 *cal_data = (u8 *) KSEG1ADDR(AP81_CAL_DATA_ADDR);
--
-- ath79_register_leds_gpio(-1, ARRAY_SIZE(ap81_leds_gpio),
-- ap81_leds_gpio);
-- ath79_register_gpio_keys_polled(-1, AP81_KEYS_POLL_INTERVAL,
-- ARRAY_SIZE(ap81_gpio_keys),
-- ap81_gpio_keys);
-- ath79_register_spi(&ap81_spi_data, ap81_spi_info,
-- ARRAY_SIZE(ap81_spi_info));
-- ath79_register_wmac(cal_data);
-- ath79_register_usb();
--}
--
--MIPS_MACHINE(ATH79_MACH_AP81, "AP81", "Atheros AP81 reference board",
-- ap81_setup);
---- a/arch/mips/ath79/mach-db120.c
-+++ /dev/null
-@@ -1,136 +0,0 @@
--/*
-- * Atheros DB120 reference board support
-- *
-- * Copyright (c) 2011 Qualcomm Atheros
-- * Copyright (c) 2011 Gabor Juhos <juhosg@openwrt.org>
-- *
-- * Permission to use, copy, modify, and/or distribute this software for any
-- * purpose with or without fee is hereby granted, provided that the above
-- * copyright notice and this permission notice appear in all copies.
-- *
-- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
-- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
-- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
-- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
-- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
-- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
-- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-- *
-- */
--
--#include <linux/pci.h>
--#include <linux/ath9k_platform.h>
--
--#include "machtypes.h"
--#include "dev-gpio-buttons.h"
--#include "dev-leds-gpio.h"
--#include "dev-spi.h"
--#include "dev-usb.h"
--#include "dev-wmac.h"
--#include "pci.h"
--
--#define DB120_GPIO_LED_WLAN_5G 12
--#define DB120_GPIO_LED_WLAN_2G 13
--#define DB120_GPIO_LED_STATUS 14
--#define DB120_GPIO_LED_WPS 15
--
--#define DB120_GPIO_BTN_WPS 16
--
--#define DB120_KEYS_POLL_INTERVAL 20 /* msecs */
--#define DB120_KEYS_DEBOUNCE_INTERVAL (3 * DB120_KEYS_POLL_INTERVAL)
--
--#define DB120_WMAC_CALDATA_OFFSET 0x1000
--#define DB120_PCIE_CALDATA_OFFSET 0x5000
--
--static struct gpio_led db120_leds_gpio[] __initdata = {
-- {
-- .name = "db120:green:status",
-- .gpio = DB120_GPIO_LED_STATUS,
-- .active_low = 1,
-- },
-- {
-- .name = "db120:green:wps",
-- .gpio = DB120_GPIO_LED_WPS,
-- .active_low = 1,
-- },
-- {
-- .name = "db120:green:wlan-5g",
-- .gpio = DB120_GPIO_LED_WLAN_5G,
-- .active_low = 1,
-- },
-- {
-- .name = "db120:green:wlan-2g",
-- .gpio = DB120_GPIO_LED_WLAN_2G,
-- .active_low = 1,
-- },
--};
--
--static struct gpio_keys_button db120_gpio_keys[] __initdata = {
-- {
-- .desc = "WPS button",
-- .type = EV_KEY,
-- .code = KEY_WPS_BUTTON,
-- .debounce_interval = DB120_KEYS_DEBOUNCE_INTERVAL,
-- .gpio = DB120_GPIO_BTN_WPS,
-- .active_low = 1,
-- },
--};
--
--static struct spi_board_info db120_spi_info[] = {
-- {
-- .bus_num = 0,
-- .chip_select = 0,
-- .max_speed_hz = 25000000,
-- .modalias = "s25sl064a",
-- }
--};
--
--static struct ath79_spi_platform_data db120_spi_data = {
-- .bus_num = 0,
-- .num_chipselect = 1,
--};
--
--#ifdef CONFIG_PCI
--static struct ath9k_platform_data db120_ath9k_data;
--
--static int db120_pci_plat_dev_init(struct pci_dev *dev)
--{
-- switch (PCI_SLOT(dev->devfn)) {
-- case 0:
-- dev->dev.platform_data = &db120_ath9k_data;
-- break;
-- }
--
-- return 0;
--}
--
--static void __init db120_pci_init(u8 *eeprom)
--{
-- memcpy(db120_ath9k_data.eeprom_data, eeprom,
-- sizeof(db120_ath9k_data.eeprom_data));
--
-- ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init);
-- ath79_register_pci();
--}
--#else
--static inline void db120_pci_init(u8 *eeprom) {}
--#endif /* CONFIG_PCI */
--
--static void __init db120_setup(void)
--{
-- u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
--
-- ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio),
-- db120_leds_gpio);
-- ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL,
-- ARRAY_SIZE(db120_gpio_keys),
-- db120_gpio_keys);
-- ath79_register_spi(&db120_spi_data, db120_spi_info,
-- ARRAY_SIZE(db120_spi_info));
-- ath79_register_usb();
-- ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET);
-- db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET);
--}
--
--MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board",
-- db120_setup);
---- a/arch/mips/ath79/mach-pb44.c
-+++ /dev/null
-@@ -1,128 +0,0 @@
--/*
-- * Atheros PB44 reference board support
-- *
-- * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#include <linux/init.h>
--#include <linux/platform_device.h>
--#include <linux/i2c.h>
--#include <linux/gpio/machine.h>
--#include <linux/platform_data/pcf857x.h>
--
--#include "machtypes.h"
--#include "dev-gpio-buttons.h"
--#include "dev-leds-gpio.h"
--#include "dev-spi.h"
--#include "dev-usb.h"
--#include "pci.h"
--
--#define PB44_GPIO_I2C_SCL 0
--#define PB44_GPIO_I2C_SDA 1
--
--#define PB44_GPIO_EXP_BASE 16
--#define PB44_GPIO_SW_RESET (PB44_GPIO_EXP_BASE + 6)
--#define PB44_GPIO_SW_JUMP (PB44_GPIO_EXP_BASE + 8)
--#define PB44_GPIO_LED_JUMP1 (PB44_GPIO_EXP_BASE + 9)
--#define PB44_GPIO_LED_JUMP2 (PB44_GPIO_EXP_BASE + 10)
--
--#define PB44_KEYS_POLL_INTERVAL 20 /* msecs */
--#define PB44_KEYS_DEBOUNCE_INTERVAL (3 * PB44_KEYS_POLL_INTERVAL)
--
--static struct gpiod_lookup_table pb44_i2c_gpiod_table = {
-- .dev_id = "i2c-gpio.0",
-- .table = {
-- GPIO_LOOKUP_IDX("ath79-gpio", PB44_GPIO_I2C_SDA,
-- NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-- GPIO_LOOKUP_IDX("ath79-gpio", PB44_GPIO_I2C_SCL,
-- NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-- },
--};
--
--static struct platform_device pb44_i2c_gpio_device = {
-- .name = "i2c-gpio",
-- .id = 0,
-- .dev = {
-- .platform_data = NULL,
-- }
--};
--
--static struct pcf857x_platform_data pb44_pcf857x_data = {
-- .gpio_base = PB44_GPIO_EXP_BASE,
--};
--
--static struct i2c_board_info pb44_i2c_board_info[] __initdata = {
-- {
-- I2C_BOARD_INFO("pcf8575", 0x20),
-- .platform_data = &pb44_pcf857x_data,
-- },
--};
--
--static struct gpio_led pb44_leds_gpio[] __initdata = {
-- {
-- .name = "pb44:amber:jump1",
-- .gpio = PB44_GPIO_LED_JUMP1,
-- .active_low = 1,
-- }, {
-- .name = "pb44:green:jump2",
-- .gpio = PB44_GPIO_LED_JUMP2,
-- .active_low = 1,
-- },
--};
--
--static struct gpio_keys_button pb44_gpio_keys[] __initdata = {
-- {
-- .desc = "soft_reset",
-- .type = EV_KEY,
-- .code = KEY_RESTART,
-- .debounce_interval = PB44_KEYS_DEBOUNCE_INTERVAL,
-- .gpio = PB44_GPIO_SW_RESET,
-- .active_low = 1,
-- } , {
-- .desc = "jumpstart",
-- .type = EV_KEY,
-- .code = KEY_WPS_BUTTON,
-- .debounce_interval = PB44_KEYS_DEBOUNCE_INTERVAL,
-- .gpio = PB44_GPIO_SW_JUMP,
-- .active_low = 1,
-- }
--};
--
--static struct spi_board_info pb44_spi_info[] = {
-- {
-- .bus_num = 0,
-- .chip_select = 0,
-- .max_speed_hz = 25000000,
-- .modalias = "m25p64",
-- },
--};
--
--static struct ath79_spi_platform_data pb44_spi_data = {
-- .bus_num = 0,
-- .num_chipselect = 1,
--};
--
--static void __init pb44_init(void)
--{
-- gpiod_add_lookup_table(&pb44_i2c_gpiod_table);
-- i2c_register_board_info(0, pb44_i2c_board_info,
-- ARRAY_SIZE(pb44_i2c_board_info));
-- platform_device_register(&pb44_i2c_gpio_device);
--
-- ath79_register_leds_gpio(-1, ARRAY_SIZE(pb44_leds_gpio),
-- pb44_leds_gpio);
-- ath79_register_gpio_keys_polled(-1, PB44_KEYS_POLL_INTERVAL,
-- ARRAY_SIZE(pb44_gpio_keys),
-- pb44_gpio_keys);
-- ath79_register_spi(&pb44_spi_data, pb44_spi_info,
-- ARRAY_SIZE(pb44_spi_info));
-- ath79_register_usb();
-- ath79_register_pci();
--}
--
--MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board",
-- pb44_init);
---- a/arch/mips/ath79/mach-ubnt-xm.c
-+++ /dev/null
-@@ -1,126 +0,0 @@
--/*
-- * Ubiquiti Networks XM (rev 1.0) board support
-- *
-- * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
-- *
-- * Derived from: mach-pb44.c
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#include <linux/init.h>
--#include <linux/pci.h>
--#include <linux/ath9k_platform.h>
--
--#include <asm/mach-ath79/irq.h>
--
--#include "machtypes.h"
--#include "dev-gpio-buttons.h"
--#include "dev-leds-gpio.h"
--#include "dev-spi.h"
--#include "pci.h"
--
--#define UBNT_XM_GPIO_LED_L1 0
--#define UBNT_XM_GPIO_LED_L2 1
--#define UBNT_XM_GPIO_LED_L3 11
--#define UBNT_XM_GPIO_LED_L4 7
--
--#define UBNT_XM_GPIO_BTN_RESET 12
--
--#define UBNT_XM_KEYS_POLL_INTERVAL 20
--#define UBNT_XM_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_XM_KEYS_POLL_INTERVAL)
--
--#define UBNT_XM_EEPROM_ADDR (u8 *) KSEG1ADDR(0x1fff1000)
--
--static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
-- {
-- .name = "ubnt-xm:red:link1",
-- .gpio = UBNT_XM_GPIO_LED_L1,
-- .active_low = 0,
-- }, {
-- .name = "ubnt-xm:orange:link2",
-- .gpio = UBNT_XM_GPIO_LED_L2,
-- .active_low = 0,
-- }, {
-- .name = "ubnt-xm:green:link3",
-- .gpio = UBNT_XM_GPIO_LED_L3,
-- .active_low = 0,
-- }, {
-- .name = "ubnt-xm:green:link4",
-- .gpio = UBNT_XM_GPIO_LED_L4,
-- .active_low = 0,
-- },
--};
--
--static struct gpio_keys_button ubnt_xm_gpio_keys[] __initdata = {
-- {
-- .desc = "reset",
-- .type = EV_KEY,
-- .code = KEY_RESTART,
-- .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL,
-- .gpio = UBNT_XM_GPIO_BTN_RESET,
-- .active_low = 1,
-- }
--};
--
--static struct spi_board_info ubnt_xm_spi_info[] = {
-- {
-- .bus_num = 0,
-- .chip_select = 0,
-- .max_speed_hz = 25000000,
-- .modalias = "mx25l6405d",
-- }
--};
--
--static struct ath79_spi_platform_data ubnt_xm_spi_data = {
-- .bus_num = 0,
-- .num_chipselect = 1,
--};
--
--#ifdef CONFIG_PCI
--static struct ath9k_platform_data ubnt_xm_eeprom_data;
--
--static int ubnt_xm_pci_plat_dev_init(struct pci_dev *dev)
--{
-- switch (PCI_SLOT(dev->devfn)) {
-- case 0:
-- dev->dev.platform_data = &ubnt_xm_eeprom_data;
-- break;
-- }
--
-- return 0;
--}
--
--static void __init ubnt_xm_pci_init(void)
--{
-- memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
-- sizeof(ubnt_xm_eeprom_data.eeprom_data));
--
-- ath79_pci_set_plat_dev_init(ubnt_xm_pci_plat_dev_init);
-- ath79_register_pci();
--}
--#else
--static inline void ubnt_xm_pci_init(void) {}
--#endif /* CONFIG_PCI */
--
--static void __init ubnt_xm_init(void)
--{
-- ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio),
-- ubnt_xm_leds_gpio);
--
-- ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
-- ARRAY_SIZE(ubnt_xm_gpio_keys),
-- ubnt_xm_gpio_keys);
--
-- ath79_register_spi(&ubnt_xm_spi_data, ubnt_xm_spi_info,
-- ARRAY_SIZE(ubnt_xm_spi_info));
--
-- ubnt_xm_pci_init();
--}
--
--MIPS_MACHINE(ATH79_MACH_UBNT_XM,
-- "UBNT-XM",
-- "Ubiquiti Networks XM (rev 1.0) board",
-- ubnt_xm_init);
---- a/arch/mips/ath79/machtypes.h
-+++ /dev/null
-@@ -1,28 +0,0 @@
--/*
-- * Atheros AR71XX/AR724X/AR913X machine type definitions
-- *
-- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#ifndef _ATH79_MACHTYPE_H
--#define _ATH79_MACHTYPE_H
--
--#include <asm/mips_machine.h>
--
--enum ath79_mach_type {
-- ATH79_MACH_GENERIC_OF = -1, /* Device tree board */
-- ATH79_MACH_GENERIC = 0,
-- ATH79_MACH_AP121, /* Atheros AP121 reference board */
-- ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */
-- ATH79_MACH_AP81, /* Atheros AP81 reference board */
-- ATH79_MACH_DB120, /* Atheros DB120 reference board */
-- ATH79_MACH_PB44, /* Atheros PB44 reference board */
-- ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */
--};
--
--#endif /* _ATH79_MACHTYPE_H */
---- a/arch/mips/ath79/setup.c
-+++ b/arch/mips/ath79/setup.c
-@@ -33,7 +33,6 @@
- #include <asm/mach-ath79/ar71xx_regs.h>
- #include "common.h"
- #include "dev-common.h"
--#include "machtypes.h"
-
- #define ATH79_SYS_TYPE_LEN 64
-
-@@ -230,25 +229,21 @@ void __init plat_mem_setup(void)
- else if (fw_passed_dtb)
- __dt_setup_arch((void *)KSEG0ADDR(fw_passed_dtb));
-
-- if (mips_machtype != ATH79_MACH_GENERIC_OF) {
-- ath79_reset_base = ioremap_nocache(AR71XX_RESET_BASE,
-- AR71XX_RESET_SIZE);
-- ath79_pll_base = ioremap_nocache(AR71XX_PLL_BASE,
-- AR71XX_PLL_SIZE);
-- ath79_detect_sys_type();
-- ath79_ddr_ctrl_init();
-+ ath79_reset_base = ioremap_nocache(AR71XX_RESET_BASE,
-+ AR71XX_RESET_SIZE);
-+ ath79_pll_base = ioremap_nocache(AR71XX_PLL_BASE,
-+ AR71XX_PLL_SIZE);
-+ ath79_detect_sys_type();
-+ ath79_ddr_ctrl_init();
-
-- detect_memory_region(0, ATH79_MEM_SIZE_MIN, ATH79_MEM_SIZE_MAX);
--
-- /* OF machines should use the reset driver */
-- _machine_restart = ath79_restart;
-- }
-+ detect_memory_region(0, ATH79_MEM_SIZE_MIN, ATH79_MEM_SIZE_MAX);
-
-+ _machine_restart = ath79_restart;
- _machine_halt = ath79_halt;
- pm_power_off = ath79_halt;
- }
-
--static void __init ath79_of_plat_time_init(void)
-+void __init plat_time_init(void)
- {
- struct device_node *np;
- struct clk *clk;
-@@ -278,66 +273,12 @@ static void __init ath79_of_plat_time_in
- clk_put(clk);
- }
-
--void __init plat_time_init(void)
--{
-- unsigned long cpu_clk_rate;
-- unsigned long ahb_clk_rate;
-- unsigned long ddr_clk_rate;
-- unsigned long ref_clk_rate;
--
-- if (IS_ENABLED(CONFIG_OF) && mips_machtype == ATH79_MACH_GENERIC_OF) {
-- ath79_of_plat_time_init();
-- return;
-- }
--
-- ath79_clocks_init();
--
-- cpu_clk_rate = ath79_get_sys_clk_rate("cpu");
-- ahb_clk_rate = ath79_get_sys_clk_rate("ahb");
-- ddr_clk_rate = ath79_get_sys_clk_rate("ddr");
-- ref_clk_rate = ath79_get_sys_clk_rate("ref");
--
-- pr_info("Clocks: CPU:%lu.%03luMHz, DDR:%lu.%03luMHz, AHB:%lu.%03luMHz, Ref:%lu.%03luMHz\n",
-- cpu_clk_rate / 1000000, (cpu_clk_rate / 1000) % 1000,
-- ddr_clk_rate / 1000000, (ddr_clk_rate / 1000) % 1000,
-- ahb_clk_rate / 1000000, (ahb_clk_rate / 1000) % 1000,
-- ref_clk_rate / 1000000, (ref_clk_rate / 1000) % 1000);
--
-- mips_hpt_frequency = cpu_clk_rate / 2;
--}
--
- void __init arch_init_irq(void)
- {
- irqchip_init();
- }
-
--static int __init ath79_setup(void)
--{
-- if (mips_machtype == ATH79_MACH_GENERIC_OF)
-- return 0;
--
-- ath79_gpio_init();
-- ath79_register_uart();
-- ath79_register_wdt();
--
-- mips_machine_setup();
--
-- return 0;
--}
--
--arch_initcall(ath79_setup);
--
- void __init device_tree_init(void)
- {
- unflatten_and_copy_device_tree();
- }
--
--MIPS_MACHINE(ATH79_MACH_GENERIC,
-- "Generic",
-- "Generic AR71XX/AR724X/AR913X based board",
-- NULL);
--
--MIPS_MACHINE(ATH79_MACH_GENERIC_OF,
-- "DTB",
-- "Generic AR71XX/AR724X/AR913X based board (DT)",
-- NULL);
+++ /dev/null
-From d0f1420702ed47a82572aaf39e7407055518d14e Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Sat, 23 Jun 2018 15:05:19 +0200
-Subject: [PATCH 29/33] MIPS: ath79: drop legacy pci code
-
-With the target now being fully OF based, we can drop the legacy pci
-platform code. The only bits that we need to keep is the fixup code
-which we move to its own code file.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/ath79/Makefile | 1 -
- arch/mips/ath79/pci.c | 273 --------------------------------------------
- arch/mips/ath79/pci.h | 35 ------
- arch/mips/pci/Makefile | 1 +
- arch/mips/pci/fixup-ath79.c | 21 ++++
- 5 files changed, 22 insertions(+), 309 deletions(-)
- delete mode 100644 arch/mips/ath79/pci.c
- delete mode 100644 arch/mips/ath79/pci.h
- create mode 100644 arch/mips/pci/fixup-ath79.c
-
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -11,7 +11,6 @@
- obj-y := prom.o setup.o common.o clock.o
-
- obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
--obj-$(CONFIG_PCI) += pci.o
-
- #
- # Devices
---- a/arch/mips/ath79/pci.c
-+++ /dev/null
-@@ -1,273 +0,0 @@
--/*
-- * Atheros AR71XX/AR724X specific PCI setup code
-- *
-- * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
-- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- * Parts of this file are based on Atheros' 2.6.15 BSP
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#include <linux/init.h>
--#include <linux/pci.h>
--#include <linux/resource.h>
--#include <linux/platform_device.h>
--#include <asm/mach-ath79/ar71xx_regs.h>
--#include <asm/mach-ath79/ath79.h>
--#include <asm/mach-ath79/irq.h>
--#include "pci.h"
--
--static int (*ath79_pci_plat_dev_init)(struct pci_dev *dev);
--static const struct ath79_pci_irq *ath79_pci_irq_map;
--static unsigned ath79_pci_nr_irqs;
--
--static const struct ath79_pci_irq ar71xx_pci_irq_map[] = {
-- {
-- .slot = 17,
-- .pin = 1,
-- .irq = ATH79_PCI_IRQ(0),
-- }, {
-- .slot = 18,
-- .pin = 1,
-- .irq = ATH79_PCI_IRQ(1),
-- }, {
-- .slot = 19,
-- .pin = 1,
-- .irq = ATH79_PCI_IRQ(2),
-- }
--};
--
--static const struct ath79_pci_irq ar724x_pci_irq_map[] = {
-- {
-- .slot = 0,
-- .pin = 1,
-- .irq = ATH79_PCI_IRQ(0),
-- }
--};
--
--static const struct ath79_pci_irq qca955x_pci_irq_map[] = {
-- {
-- .bus = 0,
-- .slot = 0,
-- .pin = 1,
-- .irq = ATH79_PCI_IRQ(0),
-- },
-- {
-- .bus = 1,
-- .slot = 0,
-- .pin = 1,
-- .irq = ATH79_PCI_IRQ(1),
-- },
--};
--
--int pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin)
--{
-- int irq = -1;
-- int i;
--
-- if (ath79_pci_nr_irqs == 0 ||
-- ath79_pci_irq_map == NULL) {
-- if (soc_is_ar71xx()) {
-- ath79_pci_irq_map = ar71xx_pci_irq_map;
-- ath79_pci_nr_irqs = ARRAY_SIZE(ar71xx_pci_irq_map);
-- } else if (soc_is_ar724x() ||
-- soc_is_ar9342() ||
-- soc_is_ar9344()) {
-- ath79_pci_irq_map = ar724x_pci_irq_map;
-- ath79_pci_nr_irqs = ARRAY_SIZE(ar724x_pci_irq_map);
-- } else if (soc_is_qca955x()) {
-- ath79_pci_irq_map = qca955x_pci_irq_map;
-- ath79_pci_nr_irqs = ARRAY_SIZE(qca955x_pci_irq_map);
-- } else {
-- pr_crit("pci %s: invalid irq map\n",
-- pci_name((struct pci_dev *) dev));
-- return irq;
-- }
-- }
--
-- for (i = 0; i < ath79_pci_nr_irqs; i++) {
-- const struct ath79_pci_irq *entry;
--
-- entry = &ath79_pci_irq_map[i];
-- if (entry->bus == dev->bus->number &&
-- entry->slot == slot &&
-- entry->pin == pin) {
-- irq = entry->irq;
-- break;
-- }
-- }
--
-- if (irq < 0)
-- pr_crit("pci %s: no irq found for pin %u\n",
-- pci_name((struct pci_dev *) dev), pin);
-- else
-- pr_info("pci %s: using irq %d for pin %u\n",
-- pci_name((struct pci_dev *) dev), irq, pin);
--
-- return irq;
--}
--
--int pcibios_plat_dev_init(struct pci_dev *dev)
--{
-- if (ath79_pci_plat_dev_init)
-- return ath79_pci_plat_dev_init(dev);
--
-- return 0;
--}
--
--void __init ath79_pci_set_irq_map(unsigned nr_irqs,
-- const struct ath79_pci_irq *map)
--{
-- ath79_pci_nr_irqs = nr_irqs;
-- ath79_pci_irq_map = map;
--}
--
--void __init ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev))
--{
-- ath79_pci_plat_dev_init = func;
--}
--
--static struct platform_device *
--ath79_register_pci_ar71xx(void)
--{
-- struct platform_device *pdev;
-- struct resource res[4];
--
-- memset(res, 0, sizeof(res));
--
-- res[0].name = "cfg_base";
-- res[0].flags = IORESOURCE_MEM;
-- res[0].start = AR71XX_PCI_CFG_BASE;
-- res[0].end = AR71XX_PCI_CFG_BASE + AR71XX_PCI_CFG_SIZE - 1;
--
-- res[1].flags = IORESOURCE_IRQ;
-- res[1].start = ATH79_CPU_IRQ(2);
-- res[1].end = ATH79_CPU_IRQ(2);
--
-- res[2].name = "io_base";
-- res[2].flags = IORESOURCE_IO;
-- res[2].start = 0;
-- res[2].end = 0;
--
-- res[3].name = "mem_base";
-- res[3].flags = IORESOURCE_MEM;
-- res[3].start = AR71XX_PCI_MEM_BASE;
-- res[3].end = AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE - 1;
--
-- pdev = platform_device_register_simple("ar71xx-pci", -1,
-- res, ARRAY_SIZE(res));
-- return pdev;
--}
--
--static struct platform_device *
--ath79_register_pci_ar724x(int id,
-- unsigned long cfg_base,
-- unsigned long ctrl_base,
-- unsigned long crp_base,
-- unsigned long mem_base,
-- unsigned long mem_size,
-- unsigned long io_base,
-- int irq)
--{
-- struct platform_device *pdev;
-- struct resource res[6];
--
-- memset(res, 0, sizeof(res));
--
-- res[0].name = "cfg_base";
-- res[0].flags = IORESOURCE_MEM;
-- res[0].start = cfg_base;
-- res[0].end = cfg_base + AR724X_PCI_CFG_SIZE - 1;
--
-- res[1].name = "ctrl_base";
-- res[1].flags = IORESOURCE_MEM;
-- res[1].start = ctrl_base;
-- res[1].end = ctrl_base + AR724X_PCI_CTRL_SIZE - 1;
--
-- res[2].flags = IORESOURCE_IRQ;
-- res[2].start = irq;
-- res[2].end = irq;
--
-- res[3].name = "mem_base";
-- res[3].flags = IORESOURCE_MEM;
-- res[3].start = mem_base;
-- res[3].end = mem_base + mem_size - 1;
--
-- res[4].name = "io_base";
-- res[4].flags = IORESOURCE_IO;
-- res[4].start = io_base;
-- res[4].end = io_base;
--
-- res[5].name = "crp_base";
-- res[5].flags = IORESOURCE_MEM;
-- res[5].start = crp_base;
-- res[5].end = crp_base + AR724X_PCI_CRP_SIZE - 1;
--
-- pdev = platform_device_register_simple("ar724x-pci", id,
-- res, ARRAY_SIZE(res));
-- return pdev;
--}
--
--int __init ath79_register_pci(void)
--{
-- struct platform_device *pdev = NULL;
--
-- if (soc_is_ar71xx()) {
-- pdev = ath79_register_pci_ar71xx();
-- } else if (soc_is_ar724x()) {
-- pdev = ath79_register_pci_ar724x(-1,
-- AR724X_PCI_CFG_BASE,
-- AR724X_PCI_CTRL_BASE,
-- AR724X_PCI_CRP_BASE,
-- AR724X_PCI_MEM_BASE,
-- AR724X_PCI_MEM_SIZE,
-- 0,
-- ATH79_CPU_IRQ(2));
-- } else if (soc_is_ar9342() ||
-- soc_is_ar9344()) {
-- u32 bootstrap;
--
-- bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
-- if ((bootstrap & AR934X_BOOTSTRAP_PCIE_RC) == 0)
-- return -ENODEV;
--
-- pdev = ath79_register_pci_ar724x(-1,
-- AR724X_PCI_CFG_BASE,
-- AR724X_PCI_CTRL_BASE,
-- AR724X_PCI_CRP_BASE,
-- AR724X_PCI_MEM_BASE,
-- AR724X_PCI_MEM_SIZE,
-- 0,
-- ATH79_IP2_IRQ(0));
-- } else if (soc_is_qca9558()) {
-- pdev = ath79_register_pci_ar724x(0,
-- QCA955X_PCI_CFG_BASE0,
-- QCA955X_PCI_CTRL_BASE0,
-- QCA955X_PCI_CRP_BASE0,
-- QCA955X_PCI_MEM_BASE0,
-- QCA955X_PCI_MEM_SIZE,
-- 0,
-- ATH79_IP2_IRQ(0));
--
-- pdev = ath79_register_pci_ar724x(1,
-- QCA955X_PCI_CFG_BASE1,
-- QCA955X_PCI_CTRL_BASE1,
-- QCA955X_PCI_CRP_BASE1,
-- QCA955X_PCI_MEM_BASE1,
-- QCA955X_PCI_MEM_SIZE,
-- 1,
-- ATH79_IP3_IRQ(2));
-- } else {
-- /* No PCI support */
-- return -ENODEV;
-- }
--
-- if (!pdev)
-- pr_err("unable to register PCI controller device\n");
--
-- return pdev ? 0 : -ENODEV;
--}
---- a/arch/mips/ath79/pci.h
-+++ /dev/null
-@@ -1,35 +0,0 @@
--/*
-- * Atheros AR71XX/AR724X PCI support
-- *
-- * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
-- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#ifndef _ATH79_PCI_H
--#define _ATH79_PCI_H
--
--struct ath79_pci_irq {
-- int bus;
-- u8 slot;
-- u8 pin;
-- int irq;
--};
--
--#ifdef CONFIG_PCI
--void ath79_pci_set_irq_map(unsigned nr_irqs, const struct ath79_pci_irq *map);
--void ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev));
--int ath79_register_pci(void);
--#else
--static inline void
--ath79_pci_set_irq_map(unsigned nr_irqs, const struct ath79_pci_irq *map) {}
--static inline void
--ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *)) {}
--static inline int ath79_register_pci(void) { return 0; }
--#endif
--
--#endif /* _ATH79_PCI_H */
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -29,6 +29,7 @@ obj-$(CONFIG_MIPS_PCI_VIRTIO) += pci-vir
- #
- # These are still pretty much in the old state, watch, go blind.
- #
-+obj-$(CONFIG_ATH79) += fixup-ath79.o
- obj-$(CONFIG_LASAT) += pci-lasat.o
- obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o
- obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-loongson2.o
---- /dev/null
-+++ b/arch/mips/pci/fixup-ath79.c
-@@ -0,0 +1,21 @@
-+/*
-+ * Copyright (C) 2018 John Crispin <john@phrozen.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include <linux/pci.h>
-+//#include <linux/of_irq.h>
-+#include <linux/of_pci.h>
-+
-+int pcibios_plat_dev_init(struct pci_dev *dev)
-+{
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ return of_irq_parse_and_map_pci(dev, slot, pin);
-+}
+++ /dev/null
-From dce930fba8ad3a90ccd164f199e57c2d61937ccd Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Sat, 23 Jun 2018 15:12:38 +0200
-Subject: [PATCH 30/33] MIPS: ath79: drop platform device registration code
-
-With the target now being fully OF based, we can drop the legacy platform
-device registration code. All devices and their drivers are now probed
-via OF.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/ath79/Makefile | 10 --
- arch/mips/ath79/common.h | 2 -
- arch/mips/ath79/dev-common.c | 159 ------------------------
- arch/mips/ath79/dev-common.h | 18 ---
- arch/mips/ath79/dev-gpio-buttons.c | 56 ---------
- arch/mips/ath79/dev-gpio-buttons.h | 23 ----
- arch/mips/ath79/dev-leds-gpio.c | 54 ---------
- arch/mips/ath79/dev-leds-gpio.h | 21 ----
- arch/mips/ath79/dev-spi.c | 38 ------
- arch/mips/ath79/dev-spi.h | 22 ----
- arch/mips/ath79/dev-usb.c | 242 -------------------------------------
- arch/mips/ath79/dev-usb.h | 17 ---
- arch/mips/ath79/dev-wmac.c | 155 ------------------------
- arch/mips/ath79/dev-wmac.h | 17 ---
- arch/mips/ath79/setup.c | 1 -
- 15 files changed, 835 deletions(-)
- delete mode 100644 arch/mips/ath79/dev-common.c
- delete mode 100644 arch/mips/ath79/dev-common.h
- delete mode 100644 arch/mips/ath79/dev-gpio-buttons.c
- delete mode 100644 arch/mips/ath79/dev-gpio-buttons.h
- delete mode 100644 arch/mips/ath79/dev-leds-gpio.c
- delete mode 100644 arch/mips/ath79/dev-leds-gpio.h
- delete mode 100644 arch/mips/ath79/dev-spi.c
- delete mode 100644 arch/mips/ath79/dev-spi.h
- delete mode 100644 arch/mips/ath79/dev-usb.c
- delete mode 100644 arch/mips/ath79/dev-usb.h
- delete mode 100644 arch/mips/ath79/dev-wmac.c
- delete mode 100644 arch/mips/ath79/dev-wmac.h
-
---- a/arch/mips/ath79/Makefile
-+++ b/arch/mips/ath79/Makefile
-@@ -11,13 +11,3 @@
- obj-y := prom.o setup.o common.o clock.o
-
- obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
--
--#
--# Devices
--#
--obj-y += dev-common.o
--obj-$(CONFIG_ATH79_DEV_GPIO_BUTTONS) += dev-gpio-buttons.o
--obj-$(CONFIG_ATH79_DEV_LEDS_GPIO) += dev-leds-gpio.o
--obj-$(CONFIG_ATH79_DEV_SPI) += dev-spi.o
--obj-$(CONFIG_ATH79_DEV_USB) += dev-usb.o
--obj-$(CONFIG_ATH79_DEV_WMAC) += dev-wmac.o
---- a/arch/mips/ath79/common.h
-+++ b/arch/mips/ath79/common.h
-@@ -24,6 +24,4 @@ unsigned long ath79_get_sys_clk_rate(con
-
- void ath79_ddr_ctrl_init(void);
-
--void ath79_gpio_init(void);
--
- #endif /* __ATH79_COMMON_H */
---- a/arch/mips/ath79/dev-common.c
-+++ /dev/null
-@@ -1,159 +0,0 @@
--/*
-- * Atheros AR71XX/AR724X/AR913X common devices
-- *
-- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- * Parts of this file are based on Atheros' 2.6.15 BSP
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#include <linux/kernel.h>
--#include <linux/init.h>
--#include <linux/platform_device.h>
--#include <linux/platform_data/gpio-ath79.h>
--#include <linux/serial_8250.h>
--#include <linux/clk.h>
--#include <linux/err.h>
--
--#include <asm/mach-ath79/ath79.h>
--#include <asm/mach-ath79/ar71xx_regs.h>
--#include "common.h"
--#include "dev-common.h"
--
--static struct resource ath79_uart_resources[] = {
-- {
-- .start = AR71XX_UART_BASE,
-- .end = AR71XX_UART_BASE + AR71XX_UART_SIZE - 1,
-- .flags = IORESOURCE_MEM,
-- },
--};
--
--#define AR71XX_UART_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP)
--static struct plat_serial8250_port ath79_uart_data[] = {
-- {
-- .mapbase = AR71XX_UART_BASE,
-- .irq = ATH79_MISC_IRQ(3),
-- .flags = AR71XX_UART_FLAGS,
-- .iotype = UPIO_MEM32,
-- .regshift = 2,
-- }, {
-- /* terminating entry */
-- }
--};
--
--static struct platform_device ath79_uart_device = {
-- .name = "serial8250",
-- .id = PLAT8250_DEV_PLATFORM,
-- .resource = ath79_uart_resources,
-- .num_resources = ARRAY_SIZE(ath79_uart_resources),
-- .dev = {
-- .platform_data = ath79_uart_data
-- },
--};
--
--static struct resource ar933x_uart_resources[] = {
-- {
-- .start = AR933X_UART_BASE,
-- .end = AR933X_UART_BASE + AR71XX_UART_SIZE - 1,
-- .flags = IORESOURCE_MEM,
-- },
-- {
-- .start = ATH79_MISC_IRQ(3),
-- .end = ATH79_MISC_IRQ(3),
-- .flags = IORESOURCE_IRQ,
-- },
--};
--
--static struct platform_device ar933x_uart_device = {
-- .name = "ar933x-uart",
-- .id = -1,
-- .resource = ar933x_uart_resources,
-- .num_resources = ARRAY_SIZE(ar933x_uart_resources),
--};
--
--void __init ath79_register_uart(void)
--{
-- unsigned long uart_clk_rate;
--
-- uart_clk_rate = ath79_get_sys_clk_rate("uart");
--
-- if (soc_is_ar71xx() ||
-- soc_is_ar724x() ||
-- soc_is_ar913x() ||
-- soc_is_ar934x() ||
-- soc_is_qca955x()) {
-- ath79_uart_data[0].uartclk = uart_clk_rate;
-- platform_device_register(&ath79_uart_device);
-- } else if (soc_is_ar933x()) {
-- platform_device_register(&ar933x_uart_device);
-- } else {
-- BUG();
-- }
--}
--
--void __init ath79_register_wdt(void)
--{
-- struct resource res;
--
-- memset(&res, 0, sizeof(res));
--
-- res.flags = IORESOURCE_MEM;
-- res.start = AR71XX_RESET_BASE + AR71XX_RESET_REG_WDOG_CTRL;
-- res.end = res.start + 0x8 - 1;
--
-- platform_device_register_simple("ath79-wdt", -1, &res, 1);
--}
--
--static struct ath79_gpio_platform_data ath79_gpio_pdata;
--
--static struct resource ath79_gpio_resources[] = {
-- {
-- .flags = IORESOURCE_MEM,
-- .start = AR71XX_GPIO_BASE,
-- .end = AR71XX_GPIO_BASE + AR71XX_GPIO_SIZE - 1,
-- },
-- {
-- .start = ATH79_MISC_IRQ(2),
-- .end = ATH79_MISC_IRQ(2),
-- .flags = IORESOURCE_IRQ,
-- },
--};
--
--static struct platform_device ath79_gpio_device = {
-- .name = "ath79-gpio",
-- .id = -1,
-- .resource = ath79_gpio_resources,
-- .num_resources = ARRAY_SIZE(ath79_gpio_resources),
-- .dev = {
-- .platform_data = &ath79_gpio_pdata
-- },
--};
--
--void __init ath79_gpio_init(void)
--{
-- if (soc_is_ar71xx()) {
-- ath79_gpio_pdata.ngpios = AR71XX_GPIO_COUNT;
-- } else if (soc_is_ar7240()) {
-- ath79_gpio_pdata.ngpios = AR7240_GPIO_COUNT;
-- } else if (soc_is_ar7241() || soc_is_ar7242()) {
-- ath79_gpio_pdata.ngpios = AR7241_GPIO_COUNT;
-- } else if (soc_is_ar913x()) {
-- ath79_gpio_pdata.ngpios = AR913X_GPIO_COUNT;
-- } else if (soc_is_ar933x()) {
-- ath79_gpio_pdata.ngpios = AR933X_GPIO_COUNT;
-- } else if (soc_is_ar934x()) {
-- ath79_gpio_pdata.ngpios = AR934X_GPIO_COUNT;
-- ath79_gpio_pdata.oe_inverted = 1;
-- } else if (soc_is_qca955x()) {
-- ath79_gpio_pdata.ngpios = QCA955X_GPIO_COUNT;
-- ath79_gpio_pdata.oe_inverted = 1;
-- } else {
-- BUG();
-- }
--
-- platform_device_register(&ath79_gpio_device);
--}
---- a/arch/mips/ath79/dev-common.h
-+++ /dev/null
-@@ -1,18 +0,0 @@
--/*
-- * Atheros AR71XX/AR724X/AR913X common devices
-- *
-- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#ifndef _ATH79_DEV_COMMON_H
--#define _ATH79_DEV_COMMON_H
--
--void ath79_register_uart(void);
--void ath79_register_wdt(void);
--
--#endif /* _ATH79_DEV_COMMON_H */
---- a/arch/mips/ath79/dev-gpio-buttons.c
-+++ /dev/null
-@@ -1,56 +0,0 @@
--/*
-- * Atheros AR71XX/AR724X/AR913X GPIO button support
-- *
-- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#include "linux/init.h"
--#include "linux/slab.h"
--#include <linux/platform_device.h>
--
--#include "dev-gpio-buttons.h"
--
--void __init ath79_register_gpio_keys_polled(int id,
-- unsigned poll_interval,
-- unsigned nbuttons,
-- struct gpio_keys_button *buttons)
--{
-- struct platform_device *pdev;
-- struct gpio_keys_platform_data pdata;
-- struct gpio_keys_button *p;
-- int err;
--
-- p = kmemdup(buttons, nbuttons * sizeof(*p), GFP_KERNEL);
-- if (!p)
-- return;
--
-- pdev = platform_device_alloc("gpio-keys-polled", id);
-- if (!pdev)
-- goto err_free_buttons;
--
-- memset(&pdata, 0, sizeof(pdata));
-- pdata.poll_interval = poll_interval;
-- pdata.nbuttons = nbuttons;
-- pdata.buttons = p;
--
-- err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
-- if (err)
-- goto err_put_pdev;
--
-- err = platform_device_add(pdev);
-- if (err)
-- goto err_put_pdev;
--
-- return;
--
--err_put_pdev:
-- platform_device_put(pdev);
--
--err_free_buttons:
-- kfree(p);
--}
---- a/arch/mips/ath79/dev-gpio-buttons.h
-+++ /dev/null
-@@ -1,23 +0,0 @@
--/*
-- * Atheros AR71XX/AR724X/AR913X GPIO button support
-- *
-- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#ifndef _ATH79_DEV_GPIO_BUTTONS_H
--#define _ATH79_DEV_GPIO_BUTTONS_H
--
--#include <linux/input.h>
--#include <linux/gpio_keys.h>
--
--void ath79_register_gpio_keys_polled(int id,
-- unsigned poll_interval,
-- unsigned nbuttons,
-- struct gpio_keys_button *buttons);
--
--#endif /* _ATH79_DEV_GPIO_BUTTONS_H */
---- a/arch/mips/ath79/dev-leds-gpio.c
-+++ /dev/null
-@@ -1,54 +0,0 @@
--/*
-- * Atheros AR71XX/AR724X/AR913X common GPIO LEDs support
-- *
-- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#include <linux/init.h>
--#include <linux/slab.h>
--#include <linux/platform_device.h>
--
--#include "dev-leds-gpio.h"
--
--void __init ath79_register_leds_gpio(int id,
-- unsigned num_leds,
-- struct gpio_led *leds)
--{
-- struct platform_device *pdev;
-- struct gpio_led_platform_data pdata;
-- struct gpio_led *p;
-- int err;
--
-- p = kmemdup(leds, num_leds * sizeof(*p), GFP_KERNEL);
-- if (!p)
-- return;
--
-- pdev = platform_device_alloc("leds-gpio", id);
-- if (!pdev)
-- goto err_free_leds;
--
-- memset(&pdata, 0, sizeof(pdata));
-- pdata.num_leds = num_leds;
-- pdata.leds = p;
--
-- err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
-- if (err)
-- goto err_put_pdev;
--
-- err = platform_device_add(pdev);
-- if (err)
-- goto err_put_pdev;
--
-- return;
--
--err_put_pdev:
-- platform_device_put(pdev);
--
--err_free_leds:
-- kfree(p);
--}
---- a/arch/mips/ath79/dev-leds-gpio.h
-+++ /dev/null
-@@ -1,21 +0,0 @@
--/*
-- * Atheros AR71XX/AR724X/AR913X common GPIO LEDs support
-- *
-- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#ifndef _ATH79_DEV_LEDS_GPIO_H
--#define _ATH79_DEV_LEDS_GPIO_H
--
--#include <linux/leds.h>
--
--void ath79_register_leds_gpio(int id,
-- unsigned num_leds,
-- struct gpio_led *leds);
--
--#endif /* _ATH79_DEV_LEDS_GPIO_H */
---- a/arch/mips/ath79/dev-spi.c
-+++ /dev/null
-@@ -1,38 +0,0 @@
--/*
-- * Atheros AR71XX/AR724X/AR913X SPI controller device
-- *
-- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#include <linux/platform_device.h>
--#include <asm/mach-ath79/ar71xx_regs.h>
--#include "dev-spi.h"
--
--static struct resource ath79_spi_resources[] = {
-- {
-- .start = AR71XX_SPI_BASE,
-- .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1,
-- .flags = IORESOURCE_MEM,
-- },
--};
--
--static struct platform_device ath79_spi_device = {
-- .name = "ath79-spi",
-- .id = -1,
-- .resource = ath79_spi_resources,
-- .num_resources = ARRAY_SIZE(ath79_spi_resources),
--};
--
--void __init ath79_register_spi(struct ath79_spi_platform_data *pdata,
-- struct spi_board_info const *info,
-- unsigned n)
--{
-- spi_register_board_info(info, n);
-- ath79_spi_device.dev.platform_data = pdata;
-- platform_device_register(&ath79_spi_device);
--}
---- a/arch/mips/ath79/dev-spi.h
-+++ /dev/null
-@@ -1,22 +0,0 @@
--/*
-- * Atheros AR71XX/AR724X/AR913X SPI controller device
-- *
-- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#ifndef _ATH79_DEV_SPI_H
--#define _ATH79_DEV_SPI_H
--
--#include <linux/spi/spi.h>
--#include <asm/mach-ath79/ath79_spi_platform.h>
--
--void ath79_register_spi(struct ath79_spi_platform_data *pdata,
-- struct spi_board_info const *info,
-- unsigned n);
--
--#endif /* _ATH79_DEV_SPI_H */
---- a/arch/mips/ath79/dev-usb.c
-+++ /dev/null
-@@ -1,242 +0,0 @@
--/*
-- * Atheros AR7XXX/AR9XXX USB Host Controller device
-- *
-- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- * Parts of this file are based on Atheros' 2.6.15 BSP
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#include <linux/kernel.h>
--#include <linux/init.h>
--#include <linux/delay.h>
--#include <linux/irq.h>
--#include <linux/dma-mapping.h>
--#include <linux/platform_device.h>
--#include <linux/usb/ehci_pdriver.h>
--#include <linux/usb/ohci_pdriver.h>
--
--#include <asm/mach-ath79/ath79.h>
--#include <asm/mach-ath79/ar71xx_regs.h>
--#include "common.h"
--#include "dev-usb.h"
--
--static u64 ath79_usb_dmamask = DMA_BIT_MASK(32);
--
--static struct usb_ohci_pdata ath79_ohci_pdata = {
--};
--
--static struct usb_ehci_pdata ath79_ehci_pdata_v1 = {
-- .has_synopsys_hc_bug = 1,
--};
--
--static struct usb_ehci_pdata ath79_ehci_pdata_v2 = {
-- .caps_offset = 0x100,
-- .has_tt = 1,
--};
--
--static void __init ath79_usb_register(const char *name, int id,
-- unsigned long base, unsigned long size,
-- int irq, const void *data,
-- size_t data_size)
--{
-- struct resource res[2];
-- struct platform_device *pdev;
--
-- memset(res, 0, sizeof(res));
--
-- res[0].flags = IORESOURCE_MEM;
-- res[0].start = base;
-- res[0].end = base + size - 1;
--
-- res[1].flags = IORESOURCE_IRQ;
-- res[1].start = irq;
-- res[1].end = irq;
--
-- pdev = platform_device_register_resndata(NULL, name, id,
-- res, ARRAY_SIZE(res),
-- data, data_size);
--
-- if (IS_ERR(pdev)) {
-- pr_err("ath79: unable to register USB at %08lx, err=%d\n",
-- base, (int) PTR_ERR(pdev));
-- return;
-- }
--
-- pdev->dev.dma_mask = &ath79_usb_dmamask;
-- pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
--}
--
--#define AR71XX_USB_RESET_MASK (AR71XX_RESET_USB_HOST | \
-- AR71XX_RESET_USB_PHY | \
-- AR71XX_RESET_USB_OHCI_DLL)
--
--static void __init ath79_usb_setup(void)
--{
-- void __iomem *usb_ctrl_base;
--
-- ath79_device_reset_set(AR71XX_USB_RESET_MASK);
-- mdelay(1000);
-- ath79_device_reset_clear(AR71XX_USB_RESET_MASK);
--
-- usb_ctrl_base = ioremap(AR71XX_USB_CTRL_BASE, AR71XX_USB_CTRL_SIZE);
--
-- /* Turning on the Buff and Desc swap bits */
-- __raw_writel(0xf0000, usb_ctrl_base + AR71XX_USB_CTRL_REG_CONFIG);
--
-- /* WAR for HW bug. Here it adjusts the duration between two SOFS */
-- __raw_writel(0x20c00, usb_ctrl_base + AR71XX_USB_CTRL_REG_FLADJ);
--
-- iounmap(usb_ctrl_base);
--
-- mdelay(900);
--
-- ath79_usb_register("ohci-platform", -1,
-- AR71XX_OHCI_BASE, AR71XX_OHCI_SIZE,
-- ATH79_MISC_IRQ(6),
-- &ath79_ohci_pdata, sizeof(ath79_ohci_pdata));
--
-- ath79_usb_register("ehci-platform", -1,
-- AR71XX_EHCI_BASE, AR71XX_EHCI_SIZE,
-- ATH79_CPU_IRQ(3),
-- &ath79_ehci_pdata_v1, sizeof(ath79_ehci_pdata_v1));
--}
--
--static void __init ar7240_usb_setup(void)
--{
-- void __iomem *usb_ctrl_base;
--
-- ath79_device_reset_clear(AR7240_RESET_OHCI_DLL);
-- ath79_device_reset_set(AR7240_RESET_USB_HOST);
--
-- mdelay(1000);
--
-- ath79_device_reset_set(AR7240_RESET_OHCI_DLL);
-- ath79_device_reset_clear(AR7240_RESET_USB_HOST);
--
-- usb_ctrl_base = ioremap(AR7240_USB_CTRL_BASE, AR7240_USB_CTRL_SIZE);
--
-- /* WAR for HW bug. Here it adjusts the duration between two SOFS */
-- __raw_writel(0x3, usb_ctrl_base + AR71XX_USB_CTRL_REG_FLADJ);
--
-- iounmap(usb_ctrl_base);
--
-- ath79_usb_register("ohci-platform", -1,
-- AR7240_OHCI_BASE, AR7240_OHCI_SIZE,
-- ATH79_CPU_IRQ(3),
-- &ath79_ohci_pdata, sizeof(ath79_ohci_pdata));
--}
--
--static void __init ar724x_usb_setup(void)
--{
-- ath79_device_reset_set(AR724X_RESET_USBSUS_OVERRIDE);
-- mdelay(10);
--
-- ath79_device_reset_clear(AR724X_RESET_USB_HOST);
-- mdelay(10);
--
-- ath79_device_reset_clear(AR724X_RESET_USB_PHY);
-- mdelay(10);
--
-- ath79_usb_register("ehci-platform", -1,
-- AR724X_EHCI_BASE, AR724X_EHCI_SIZE,
-- ATH79_CPU_IRQ(3),
-- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
--}
--
--static void __init ar913x_usb_setup(void)
--{
-- ath79_device_reset_set(AR913X_RESET_USBSUS_OVERRIDE);
-- mdelay(10);
--
-- ath79_device_reset_clear(AR913X_RESET_USB_HOST);
-- mdelay(10);
--
-- ath79_device_reset_clear(AR913X_RESET_USB_PHY);
-- mdelay(10);
--
-- ath79_usb_register("ehci-platform", -1,
-- AR913X_EHCI_BASE, AR913X_EHCI_SIZE,
-- ATH79_CPU_IRQ(3),
-- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
--}
--
--static void __init ar933x_usb_setup(void)
--{
-- ath79_device_reset_set(AR933X_RESET_USBSUS_OVERRIDE);
-- mdelay(10);
--
-- ath79_device_reset_clear(AR933X_RESET_USB_HOST);
-- mdelay(10);
--
-- ath79_device_reset_clear(AR933X_RESET_USB_PHY);
-- mdelay(10);
--
-- ath79_usb_register("ehci-platform", -1,
-- AR933X_EHCI_BASE, AR933X_EHCI_SIZE,
-- ATH79_CPU_IRQ(3),
-- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
--}
--
--static void __init ar934x_usb_setup(void)
--{
-- u32 bootstrap;
--
-- bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
-- if (bootstrap & AR934X_BOOTSTRAP_USB_MODE_DEVICE)
-- return;
--
-- ath79_device_reset_set(AR934X_RESET_USBSUS_OVERRIDE);
-- udelay(1000);
--
-- ath79_device_reset_clear(AR934X_RESET_USB_PHY);
-- udelay(1000);
--
-- ath79_device_reset_clear(AR934X_RESET_USB_PHY_ANALOG);
-- udelay(1000);
--
-- ath79_device_reset_clear(AR934X_RESET_USB_HOST);
-- udelay(1000);
--
-- ath79_usb_register("ehci-platform", -1,
-- AR934X_EHCI_BASE, AR934X_EHCI_SIZE,
-- ATH79_CPU_IRQ(3),
-- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
--}
--
--static void __init qca955x_usb_setup(void)
--{
-- ath79_usb_register("ehci-platform", 0,
-- QCA955X_EHCI0_BASE, QCA955X_EHCI_SIZE,
-- ATH79_IP3_IRQ(0),
-- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
--
-- ath79_usb_register("ehci-platform", 1,
-- QCA955X_EHCI1_BASE, QCA955X_EHCI_SIZE,
-- ATH79_IP3_IRQ(1),
-- &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2));
--}
--
--void __init ath79_register_usb(void)
--{
-- if (soc_is_ar71xx())
-- ath79_usb_setup();
-- else if (soc_is_ar7240())
-- ar7240_usb_setup();
-- else if (soc_is_ar7241() || soc_is_ar7242())
-- ar724x_usb_setup();
-- else if (soc_is_ar913x())
-- ar913x_usb_setup();
-- else if (soc_is_ar933x())
-- ar933x_usb_setup();
-- else if (soc_is_ar934x())
-- ar934x_usb_setup();
-- else if (soc_is_qca955x())
-- qca955x_usb_setup();
-- else
-- BUG();
--}
---- a/arch/mips/ath79/dev-usb.h
-+++ /dev/null
-@@ -1,17 +0,0 @@
--/*
-- * Atheros AR71XX/AR724X/AR913X USB Host Controller support
-- *
-- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#ifndef _ATH79_DEV_USB_H
--#define _ATH79_DEV_USB_H
--
--void ath79_register_usb(void);
--
--#endif /* _ATH79_DEV_USB_H */
---- a/arch/mips/ath79/dev-wmac.c
-+++ /dev/null
-@@ -1,155 +0,0 @@
--/*
-- * Atheros AR913X/AR933X SoC built-in WMAC device support
-- *
-- * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
-- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- * Parts of this file are based on Atheros 2.6.15/2.6.31 BSP
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#include <linux/init.h>
--#include <linux/delay.h>
--#include <linux/irq.h>
--#include <linux/platform_device.h>
--#include <linux/ath9k_platform.h>
--
--#include <asm/mach-ath79/ath79.h>
--#include <asm/mach-ath79/ar71xx_regs.h>
--#include "dev-wmac.h"
--
--static struct ath9k_platform_data ath79_wmac_data;
--
--static struct resource ath79_wmac_resources[] = {
-- {
-- /* .start and .end fields are filled dynamically */
-- .flags = IORESOURCE_MEM,
-- }, {
-- /* .start and .end fields are filled dynamically */
-- .flags = IORESOURCE_IRQ,
-- },
--};
--
--static struct platform_device ath79_wmac_device = {
-- .name = "ath9k",
-- .id = -1,
-- .resource = ath79_wmac_resources,
-- .num_resources = ARRAY_SIZE(ath79_wmac_resources),
-- .dev = {
-- .platform_data = &ath79_wmac_data,
-- },
--};
--
--static void __init ar913x_wmac_setup(void)
--{
-- /* reset the WMAC */
-- ath79_device_reset_set(AR913X_RESET_AMBA2WMAC);
-- mdelay(10);
--
-- ath79_device_reset_clear(AR913X_RESET_AMBA2WMAC);
-- mdelay(10);
--
-- ath79_wmac_resources[0].start = AR913X_WMAC_BASE;
-- ath79_wmac_resources[0].end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1;
-- ath79_wmac_resources[1].start = ATH79_CPU_IRQ(2);
-- ath79_wmac_resources[1].end = ATH79_CPU_IRQ(2);
--}
--
--
--static int ar933x_wmac_reset(void)
--{
-- ath79_device_reset_set(AR933X_RESET_WMAC);
-- ath79_device_reset_clear(AR933X_RESET_WMAC);
--
-- return 0;
--}
--
--static int ar933x_r1_get_wmac_revision(void)
--{
-- return ath79_soc_rev;
--}
--
--static void __init ar933x_wmac_setup(void)
--{
-- u32 t;
--
-- ar933x_wmac_reset();
--
-- ath79_wmac_device.name = "ar933x_wmac";
--
-- ath79_wmac_resources[0].start = AR933X_WMAC_BASE;
-- ath79_wmac_resources[0].end = AR933X_WMAC_BASE + AR933X_WMAC_SIZE - 1;
-- ath79_wmac_resources[1].start = ATH79_CPU_IRQ(2);
-- ath79_wmac_resources[1].end = ATH79_CPU_IRQ(2);
--
-- t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP);
-- if (t & AR933X_BOOTSTRAP_REF_CLK_40)
-- ath79_wmac_data.is_clk_25mhz = false;
-- else
-- ath79_wmac_data.is_clk_25mhz = true;
--
-- if (ath79_soc_rev == 1)
-- ath79_wmac_data.get_mac_revision = ar933x_r1_get_wmac_revision;
--
-- ath79_wmac_data.external_reset = ar933x_wmac_reset;
--}
--
--static void ar934x_wmac_setup(void)
--{
-- u32 t;
--
-- ath79_wmac_device.name = "ar934x_wmac";
--
-- ath79_wmac_resources[0].start = AR934X_WMAC_BASE;
-- ath79_wmac_resources[0].end = AR934X_WMAC_BASE + AR934X_WMAC_SIZE - 1;
-- ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
-- ath79_wmac_resources[1].end = ATH79_IP2_IRQ(1);
--
-- t = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP);
-- if (t & AR934X_BOOTSTRAP_REF_CLK_40)
-- ath79_wmac_data.is_clk_25mhz = false;
-- else
-- ath79_wmac_data.is_clk_25mhz = true;
--}
--
--static void qca955x_wmac_setup(void)
--{
-- u32 t;
--
-- ath79_wmac_device.name = "qca955x_wmac";
--
-- ath79_wmac_resources[0].start = QCA955X_WMAC_BASE;
-- ath79_wmac_resources[0].end = QCA955X_WMAC_BASE + QCA955X_WMAC_SIZE - 1;
-- ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1);
-- ath79_wmac_resources[1].end = ATH79_IP2_IRQ(1);
--
-- t = ath79_reset_rr(QCA955X_RESET_REG_BOOTSTRAP);
-- if (t & QCA955X_BOOTSTRAP_REF_CLK_40)
-- ath79_wmac_data.is_clk_25mhz = false;
-- else
-- ath79_wmac_data.is_clk_25mhz = true;
--}
--
--void __init ath79_register_wmac(u8 *cal_data)
--{
-- if (soc_is_ar913x())
-- ar913x_wmac_setup();
-- else if (soc_is_ar933x())
-- ar933x_wmac_setup();
-- else if (soc_is_ar934x())
-- ar934x_wmac_setup();
-- else if (soc_is_qca955x())
-- qca955x_wmac_setup();
-- else
-- BUG();
--
-- if (cal_data)
-- memcpy(ath79_wmac_data.eeprom_data, cal_data,
-- sizeof(ath79_wmac_data.eeprom_data));
--
-- platform_device_register(&ath79_wmac_device);
--}
---- a/arch/mips/ath79/dev-wmac.h
-+++ /dev/null
-@@ -1,17 +0,0 @@
--/*
-- * Atheros AR913X/AR933X SoC built-in WMAC device support
-- *
-- * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
-- * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#ifndef _ATH79_DEV_WMAC_H
--#define _ATH79_DEV_WMAC_H
--
--void ath79_register_wmac(u8 *cal_data);
--
--#endif /* _ATH79_DEV_WMAC_H */
---- a/arch/mips/ath79/setup.c
-+++ b/arch/mips/ath79/setup.c
-@@ -32,7 +32,6 @@
- #include <asm/mach-ath79/ath79.h>
- #include <asm/mach-ath79/ar71xx_regs.h>
- #include "common.h"
--#include "dev-common.h"
-
- #define ATH79_SYS_TYPE_LEN 64
-
+++ /dev/null
-From 00e4313da4609074fff134e61dd9ffe3fd37474d Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Sun, 24 Jun 2018 09:39:41 +0200
-Subject: [PATCH 31/33] MIPS: ath79: drop !OF clock code
-
-With the target now being fully OF based, we can drop the legacy clock
-registration code. All clocks are now probed via devicetree.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/ath79/clock.c | 56 ------------------------------------------------
- arch/mips/ath79/common.h | 3 ---
- 2 files changed, 59 deletions(-)
-
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -617,60 +617,6 @@ static void __init qca956x_clocks_init(v
- ath79_set_clk(ATH79_CLK_AHB, ahb_rate);
- }
-
--void __init ath79_clocks_init(void)
--{
-- const char *wdt;
-- const char *uart;
--
-- if (soc_is_ar71xx())
-- ar71xx_clocks_init(ath79_pll_base);
-- else if (soc_is_ar724x() || soc_is_ar913x())
-- ar724x_clocks_init(ath79_pll_base);
-- else if (soc_is_ar933x())
-- ar933x_clocks_init(ath79_pll_base);
-- else if (soc_is_ar934x())
-- ar934x_clocks_init(ath79_pll_base);
-- else if (soc_is_qca953x())
-- qca953x_clocks_init(ath79_pll_base);
-- else if (soc_is_qca955x())
-- qca955x_clocks_init(ath79_pll_base);
-- else if (soc_is_qca956x() || soc_is_tp9343())
-- qca956x_clocks_init(ath79_pll_base);
-- else
-- BUG();
--
-- if (soc_is_ar71xx() || soc_is_ar724x() || soc_is_ar913x()) {
-- wdt = "ahb";
-- uart = "ahb";
-- } else if (soc_is_ar933x()) {
-- wdt = "ahb";
-- uart = "ref";
-- } else {
-- wdt = "ref";
-- uart = "ref";
-- }
--
-- clk_add_alias("wdt", NULL, wdt, NULL);
-- clk_add_alias("uart", NULL, uart, NULL);
--}
--
--unsigned long __init
--ath79_get_sys_clk_rate(const char *id)
--{
-- struct clk *clk;
-- unsigned long rate;
--
-- clk = clk_get(NULL, id);
-- if (IS_ERR(clk))
-- panic("unable to get %s clock, err=%d", id, (int) PTR_ERR(clk));
--
-- rate = clk_get_rate(clk);
-- clk_put(clk);
--
-- return rate;
--}
--
--#ifdef CONFIG_OF
- static void __init ath79_clocks_init_dt(struct device_node *np)
- {
- struct clk *ref_clk;
-@@ -727,5 +673,3 @@ CLK_OF_DECLARE(ar9340_clk, "qca,ar9340-p
- CLK_OF_DECLARE(ar9530_clk, "qca,qca9530-pll", ath79_clocks_init_dt);
- CLK_OF_DECLARE(ar9550_clk, "qca,qca9550-pll", ath79_clocks_init_dt);
- CLK_OF_DECLARE(ar9560_clk, "qca,qca9560-pll", ath79_clocks_init_dt);
--
--#endif
---- a/arch/mips/ath79/common.h
-+++ b/arch/mips/ath79/common.h
-@@ -19,9 +19,6 @@
- #define ATH79_MEM_SIZE_MIN (2 * 1024 * 1024)
- #define ATH79_MEM_SIZE_MAX (256 * 1024 * 1024)
-
--void ath79_clocks_init(void);
--unsigned long ath79_get_sys_clk_rate(const char *id);
--
- void ath79_ddr_ctrl_init(void);
-
- #endif /* __ATH79_COMMON_H */
+++ /dev/null
-From 3fc8585cf76022dba7496627074d42af88c30718 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Sat, 23 Jun 2018 15:16:55 +0200
-Subject: [PATCH 32/33] MIPS: ath79: sanitize symbols
-
-We no longer need to select which SoCs are supported as the whole arch
-code is always built. So lets drop all the SoC symbols
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/Kconfig | 2 ++
- arch/mips/ath79/Kconfig | 44 +++++---------------------------------------
- arch/mips/pci/Makefile | 2 +-
- 3 files changed, 8 insertions(+), 40 deletions(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -208,6 +208,8 @@ config ATH79
- select SYS_SUPPORTS_BIG_ENDIAN
- select SYS_SUPPORTS_MIPS16
- select SYS_SUPPORTS_ZBOOT_UART_PROM
-+ select HW_HAS_PCI
-+ select USB_ARCH_HAS_EHCI
- select USE_OF
- select USB_EHCI_ROOT_HUB_TT if USB_EHCI_HCD_PLATFORM
- help
---- a/arch/mips/ath79/Kconfig
-+++ b/arch/mips/ath79/Kconfig
-@@ -1,48 +1,14 @@
- # SPDX-License-Identifier: GPL-2.0
- if ATH79
-
--config SOC_AR71XX
-- select HW_HAS_PCI
-- def_bool n
--
--config SOC_AR724X
-- select HW_HAS_PCI
-- select PCI_AR724X if PCI
-- def_bool n
--
--config SOC_AR913X
-- def_bool n
--
--config SOC_AR933X
-- def_bool n
--
--config SOC_AR934X
-- select HW_HAS_PCI
-- select PCI_AR724X if PCI
-- def_bool n
--
--config SOC_QCA955X
-- select HW_HAS_PCI
-- select PCI_AR724X if PCI
-+config PCI_AR71XX
-+ bool "PCI support for AR7100 type SoCs"
-+ depends on PCI
- def_bool n
-
- config PCI_AR724X
-- def_bool n
--
--config ATH79_DEV_GPIO_BUTTONS
-- def_bool n
--
--config ATH79_DEV_LEDS_GPIO
-- def_bool n
--
--config ATH79_DEV_SPI
-- def_bool n
--
--config ATH79_DEV_USB
-- def_bool n
--
--config ATH79_DEV_WMAC
-- depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X)
-+ bool "PCI support for AR724x type SoCs"
-+ depends on PCI
- def_bool n
-
- endif
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -23,7 +23,7 @@ obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o
- ops-bcm63xx.o
- obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchemy.o
- obj-$(CONFIG_PCI_AR2315) += pci-ar2315.o
--obj-$(CONFIG_SOC_AR71XX) += pci-ar71xx.o
-+obj-$(CONFIG_PCI_AR71XX) += pci-ar71xx.o
- obj-$(CONFIG_PCI_AR724X) += pci-ar724x.o
- obj-$(CONFIG_MIPS_PCI_VIRTIO) += pci-virtio-guest.o
- #
+++ /dev/null
-From c4e197bbcecc7233aa9e553e7047fa50e4e1fe77 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Mon, 25 Jun 2018 15:52:34 +0200
-Subject: [PATCH 33/33] spi: ath79: drop pdata support
-
-The target is being converted to pure OF. We can therefore drop all of the
-platform data code from the driver.
-
-Cc: linux-spi@vger.kernel.org
-Acked-by: Mark Brown <broonie@kernel.org>
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/mips/include/asm/mach-ath79/ath79_spi_platform.h | 19 -------------------
- drivers/spi/spi-ath79.c | 8 --------
- 2 files changed, 27 deletions(-)
- delete mode 100644 arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
-
---- a/arch/mips/include/asm/mach-ath79/ath79_spi_platform.h
-+++ /dev/null
-@@ -1,19 +0,0 @@
--/*
-- * Platform data definition for Atheros AR71XX/AR724X/AR913X SPI controller
-- *
-- * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org>
-- *
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#ifndef _ATH79_SPI_PLATFORM_H
--#define _ATH79_SPI_PLATFORM_H
--
--struct ath79_spi_platform_data {
-- unsigned bus_num;
-- unsigned num_chipselect;
--};
--
--#endif /* _ATH79_SPI_PLATFORM_H */
---- a/drivers/spi/spi-ath79.c
-+++ b/drivers/spi/spi-ath79.c
-@@ -26,7 +26,6 @@
- #include <linux/err.h>
-
- #include <asm/mach-ath79/ar71xx_regs.h>
--#include <asm/mach-ath79/ath79_spi_platform.h>
-
- #define DRV_NAME "ath79-spi"
-
-@@ -208,7 +207,6 @@ static int ath79_spi_probe(struct platfo
- {
- struct spi_master *master;
- struct ath79_spi *sp;
-- struct ath79_spi_platform_data *pdata;
- struct resource *r;
- unsigned long rate;
- int ret;
-@@ -223,15 +221,9 @@ static int ath79_spi_probe(struct platfo
- master->dev.of_node = pdev->dev.of_node;
- platform_set_drvdata(pdev, sp);
-
-- pdata = dev_get_platdata(&pdev->dev);
--
- master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
- master->setup = ath79_spi_setup;
- master->cleanup = ath79_spi_cleanup;
-- if (pdata) {
-- master->bus_num = pdata->bus_num;
-- master->num_chipselect = pdata->num_chipselect;
-- }
-
- sp->bitbang.master = master;
- sp->bitbang.chipselect = ath79_spi_chipselect;
+++ /dev/null
---- a/arch/mips/ath79/common.c
-+++ b/arch/mips/ath79/common.c
-@@ -34,11 +34,13 @@ EXPORT_SYMBOL_GPL(ath79_ddr_freq);
-
- enum ath79_soc_type ath79_soc;
- unsigned int ath79_soc_rev;
-+EXPORT_SYMBOL_GPL(ath79_soc_rev);
-
- void __iomem *ath79_pll_base;
- void __iomem *ath79_reset_base;
- EXPORT_SYMBOL_GPL(ath79_reset_base);
--static void __iomem *ath79_ddr_base;
-+void __iomem *ath79_ddr_base;
-+EXPORT_SYMBOL_GPL(ath79_ddr_base);
- static void __iomem *ath79_ddr_wb_flush_base;
- static void __iomem *ath79_ddr_pci_win_base;
-
---- a/arch/mips/include/asm/mach-ath79/ath79.h
-+++ b/arch/mips/include/asm/mach-ath79/ath79.h
-@@ -152,6 +152,7 @@ void ath79_ddr_wb_flush(unsigned int reg
- void ath79_ddr_set_pci_windows(void);
-
- extern void __iomem *ath79_pll_base;
-+extern void __iomem *ath79_ddr_base;
- extern void __iomem *ath79_reset_base;
-
- static inline void ath79_pll_wr(unsigned reg, u32 val)
+++ /dev/null
-From 4267880319bc1a2270d352e0ded6d6386242a7ef Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 12 Aug 2014 20:49:27 +0200
-Subject: [PATCH 24/53] GPIO: add named gpio exports
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/gpio/gpiolib-of.c | 68 +++++++++++++++++++++++++++++++++++++++++
- drivers/gpio/gpiolib-sysfs.c | 10 +++++-
- include/asm-generic/gpio.h | 6 ++++
- include/linux/gpio/consumer.h | 8 +++++
- 4 files changed, 91 insertions(+), 1 deletion(-)
-
---- a/drivers/gpio/gpiolib-of.c
-+++ b/drivers/gpio/gpiolib-of.c
-@@ -23,6 +23,8 @@
- #include <linux/pinctrl/pinctrl.h>
- #include <linux/slab.h>
- #include <linux/gpio/machine.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-
- #include "gpiolib.h"
-
-@@ -660,3 +662,68 @@ void of_gpiochip_remove(struct gpio_chip
- gpiochip_remove_pin_ranges(chip);
- of_node_put(chip->of_node);
- }
-+
-+static struct of_device_id gpio_export_ids[] = {
-+ { .compatible = "gpio-export" },
-+ { /* sentinel */ }
-+};
-+
-+static int of_gpio_export_probe(struct platform_device *pdev)
-+{
-+ struct device_node *np = pdev->dev.of_node;
-+ struct device_node *cnp;
-+ u32 val;
-+ int nb = 0;
-+
-+ for_each_child_of_node(np, cnp) {
-+ const char *name = NULL;
-+ int gpio;
-+ bool dmc;
-+ int max_gpio = 1;
-+ int i;
-+
-+ of_property_read_string(cnp, "gpio-export,name", &name);
-+
-+ if (!name)
-+ max_gpio = of_gpio_count(cnp);
-+
-+ for (i = 0; i < max_gpio; i++) {
-+ unsigned flags = 0;
-+ enum of_gpio_flags of_flags;
-+
-+ gpio = of_get_gpio_flags(cnp, i, &of_flags);
-+ if (!gpio_is_valid(gpio))
-+ return gpio;
-+
-+ if (of_flags == OF_GPIO_ACTIVE_LOW)
-+ flags |= GPIOF_ACTIVE_LOW;
-+
-+ if (!of_property_read_u32(cnp, "gpio-export,output", &val))
-+ flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
-+ else
-+ flags |= GPIOF_IN;
-+
-+ if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np)))
-+ continue;
-+
-+ dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change");
-+ gpio_export_with_name(gpio, dmc, name);
-+ nb++;
-+ }
-+ }
-+
-+ dev_info(&pdev->dev, "%d gpio(s) exported\n", nb);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver gpio_export_driver = {
-+ .driver = {
-+ .name = "gpio-export",
-+ .owner = THIS_MODULE,
-+ .of_match_table = of_match_ptr(gpio_export_ids),
-+ },
-+ .probe = of_gpio_export_probe,
-+};
-+
-+module_platform_driver(gpio_export_driver);
---- a/drivers/gpio/gpiolib-sysfs.c
-+++ b/drivers/gpio/gpiolib-sysfs.c
-@@ -568,7 +568,7 @@ static struct class gpio_class = {
- *
- * Returns zero on success, else an error.
- */
--int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
-+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name)
- {
- struct gpio_chip *chip;
- struct gpio_device *gdev;
-@@ -630,6 +630,8 @@ int gpiod_export(struct gpio_desc *desc,
- offset = gpio_chip_hwgpio(desc);
- if (chip->names && chip->names[offset])
- ioname = chip->names[offset];
-+ if (name)
-+ ioname = name;
-
- dev = device_create_with_groups(&gpio_class, &gdev->dev,
- MKDEV(0, 0), data, gpio_groups,
-@@ -651,6 +653,12 @@ err_unlock:
- gpiod_dbg(desc, "%s: status %d\n", __func__, status);
- return status;
- }
-+EXPORT_SYMBOL_GPL(__gpiod_export);
-+
-+int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
-+{
-+ return __gpiod_export(desc, direction_may_change, NULL);
-+}
- EXPORT_SYMBOL_GPL(gpiod_export);
-
- static int match_export(struct device *dev, const void *desc)
---- a/include/asm-generic/gpio.h
-+++ b/include/asm-generic/gpio.h
-@@ -127,6 +127,12 @@ static inline int gpio_export(unsigned g
- return gpiod_export(gpio_to_desc(gpio), direction_may_change);
- }
-
-+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
-+static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name)
-+{
-+ return __gpiod_export(gpio_to_desc(gpio), direction_may_change, name);
-+}
-+
- static inline int gpio_export_link(struct device *dev, const char *name,
- unsigned gpio)
- {
---- a/include/linux/gpio/consumer.h
-+++ b/include/linux/gpio/consumer.h
-@@ -533,6 +533,7 @@ struct gpio_desc *devm_fwnode_get_gpiod_
-
- #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS)
-
-+int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name);
- int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
- int gpiod_export_link(struct device *dev, const char *name,
- struct gpio_desc *desc);
-@@ -540,6 +541,13 @@ void gpiod_unexport(struct gpio_desc *de
-
- #else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */
-
-+static inline int _gpiod_export(struct gpio_desc *desc,
-+ bool direction_may_change,
-+ const char *name)
-+{
-+ return -ENOSYS;
-+}
-+
- static inline int gpiod_export(struct gpio_desc *desc,
- bool direction_may_change)
- {
+++ /dev/null
---- a/arch/mips/pci/pci-ar71xx.c
-+++ b/arch/mips/pci/pci-ar71xx.c
-@@ -54,11 +54,9 @@
- struct ar71xx_pci_controller {
- struct device_node *np;
- void __iomem *cfg_base;
-- int irq;
- struct pci_controller pci_ctrl;
- struct resource io_res;
- struct resource mem_res;
-- struct irq_domain *domain;
- };
-
- /* Byte lane enable bits */
-@@ -230,104 +228,6 @@ static struct pci_ops ar71xx_pci_ops = {
- .write = ar71xx_pci_write_config,
- };
-
--static void ar71xx_pci_irq_handler(struct irq_desc *desc)
--{
-- void __iomem *base = ath79_reset_base;
-- struct irq_chip *chip = irq_desc_get_chip(desc);
-- struct ar71xx_pci_controller *apc = irq_desc_get_handler_data(desc);
-- u32 pending;
--
-- chained_irq_enter(chip, desc);
-- pending = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_STATUS) &
-- __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
--
-- if (pending & AR71XX_PCI_INT_DEV0)
-- generic_handle_irq(irq_linear_revmap(apc->domain, 1));
--
-- else if (pending & AR71XX_PCI_INT_DEV1)
-- generic_handle_irq(irq_linear_revmap(apc->domain, 2));
--
-- else if (pending & AR71XX_PCI_INT_DEV2)
-- generic_handle_irq(irq_linear_revmap(apc->domain, 3));
--
-- else if (pending & AR71XX_PCI_INT_CORE)
-- generic_handle_irq(irq_linear_revmap(apc->domain, 4));
--
-- else
-- spurious_interrupt();
-- chained_irq_exit(chip, desc);
--}
--
--static void ar71xx_pci_irq_unmask(struct irq_data *d)
--{
-- struct ar71xx_pci_controller *apc;
-- unsigned int irq;
-- void __iomem *base = ath79_reset_base;
-- u32 t;
--
-- apc = irq_data_get_irq_chip_data(d);
-- irq = irq_linear_revmap(apc->domain, d->irq);
--
-- t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
-- __raw_writel(t | (1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
--
-- /* flush write */
-- __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
--}
--
--static void ar71xx_pci_irq_mask(struct irq_data *d)
--{
-- struct ar71xx_pci_controller *apc;
-- unsigned int irq;
-- void __iomem *base = ath79_reset_base;
-- u32 t;
--
-- apc = irq_data_get_irq_chip_data(d);
-- irq = irq_linear_revmap(apc->domain, d->irq);
--
-- t = __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
-- __raw_writel(t & ~(1 << irq), base + AR71XX_RESET_REG_PCI_INT_ENABLE);
--
-- /* flush write */
-- __raw_readl(base + AR71XX_RESET_REG_PCI_INT_ENABLE);
--}
--
--static struct irq_chip ar71xx_pci_irq_chip = {
-- .name = "AR71XX PCI",
-- .irq_mask = ar71xx_pci_irq_mask,
-- .irq_unmask = ar71xx_pci_irq_unmask,
-- .irq_mask_ack = ar71xx_pci_irq_mask,
--};
--
--static int ar71xx_pci_irq_map(struct irq_domain *d,
-- unsigned int irq, irq_hw_number_t hw)
--{
-- struct ar71xx_pci_controller *apc = d->host_data;
--
-- irq_set_chip_and_handler(irq, &ar71xx_pci_irq_chip, handle_level_irq);
-- irq_set_chip_data(irq, apc);
--
-- return 0;
--}
--
--static const struct irq_domain_ops ar71xx_pci_domain_ops = {
-- .xlate = irq_domain_xlate_onecell,
-- .map = ar71xx_pci_irq_map,
--};
--
--static void ar71xx_pci_irq_init(struct ar71xx_pci_controller *apc)
--{
-- void __iomem *base = ath79_reset_base;
--
-- __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_ENABLE);
-- __raw_writel(0, base + AR71XX_RESET_REG_PCI_INT_STATUS);
--
-- apc->domain = irq_domain_add_linear(apc->np, AR71XX_PCI_IRQ_COUNT,
-- &ar71xx_pci_domain_ops, apc);
-- irq_set_chained_handler_and_data(apc->irq, ar71xx_pci_irq_handler,
-- apc);
--}
--
- static void ar71xx_pci_reset(void)
- {
- ath79_device_reset_set(AR71XX_RESET_PCI_BUS | AR71XX_RESET_PCI_CORE);
-@@ -361,10 +261,6 @@ static int ar71xx_pci_probe(struct platf
- if (IS_ERR(apc->cfg_base))
- return PTR_ERR(apc->cfg_base);
-
-- apc->irq = platform_get_irq(pdev, 0);
-- if (apc->irq < 0)
-- return -EINVAL;
--
- ar71xx_pci_reset();
-
- /* setup COMMAND register */
-@@ -375,8 +271,6 @@ static int ar71xx_pci_probe(struct platf
- /* clear bus errors */
- ar71xx_pci_check_error(apc, 1);
-
-- ar71xx_pci_irq_init(apc);
--
- apc->np = pdev->dev.of_node;
- apc->pci_ctrl.pci_ops = &ar71xx_pci_ops;
- apc->pci_ctrl.mem_resource = &apc->mem_res;
+++ /dev/null
-commit f3ffac90bc7266b7d917616f3233f58e8c08a196
-Author: Christian Lamparter <chunkeey@gmail.com>
-Date: Fri Aug 10 23:24:47 2018 +0200
-
- ath79: gmac: add parsers for rxd(v)- and tx(d|en)-delay for AR9344
-
- Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -1229,6 +1229,10 @@
- #define AR934X_ETH_CFG_RDV_DELAY BIT(16)
- #define AR934X_ETH_CFG_RDV_DELAY_MASK 0x3
- #define AR934X_ETH_CFG_RDV_DELAY_SHIFT 16
-+#define AR934X_ETH_CFG_TXD_DELAY_MASK 0x3
-+#define AR934X_ETH_CFG_TXD_DELAY_SHIFT 18
-+#define AR934X_ETH_CFG_TXE_DELAY_MASK 0x3
-+#define AR934X_ETH_CFG_TXE_DELAY_SHIFT 20
-
- /*
- * QCA953X GMAC Interface
+++ /dev/null
-From 60efe35257b063ce584968f9f80b437030ce6ba6 Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Mon, 18 Mar 2019 00:54:06 +0100
-Subject: [PATCH] MIPS: ath79: add missing QCA955x GMAC registers
-
-This adds missing GMAC register definitions for the Qualcomm Atheros
-QCA955X series MIPS SoCs.
-
-They originate from the platforms U-Boot code and the AVM FRITZ!WLAN
-Repeater 450E's GPL tarball.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- .../mips/include/asm/mach-ath79/ar71xx_regs.h | 54 +++++++++++++++++++
- 1 file changed, 54 insertions(+)
-
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -1249,7 +1249,12 @@
- */
-
- #define QCA955X_GMAC_REG_ETH_CFG 0x00
-+#define QCA955X_GMAC_REG_SGMII_RESET 0x14
- #define QCA955X_GMAC_REG_SGMII_SERDES 0x18
-+#define QCA955X_GMAC_REG_MR_AN_CONTROL 0x1c
-+#define QCA955X_GMAC_REG_MR_AN_STATUS 0x20
-+#define QCA955X_GMAC_REG_SGMII_CONFIG 0x34
-+#define QCA955X_GMAC_REG_SGMII_DEBUG 0x58
-
- #define QCA955X_ETH_CFG_RGMII_EN BIT(0)
- #define QCA955X_ETH_CFG_MII_GE0 BIT(1)
-@@ -1271,9 +1276,58 @@
- #define QCA955X_ETH_CFG_TXE_DELAY_MASK 0x3
- #define QCA955X_ETH_CFG_TXE_DELAY_SHIFT 20
-
-+#define QCA955X_SGMII_RESET_RX_CLK_N_RESET 0
-+#define QCA955X_SGMII_RESET_RX_CLK_N BIT(0)
-+#define QCA955X_SGMII_RESET_TX_CLK_N BIT(1)
-+#define QCA955X_SGMII_RESET_RX_125M_N BIT(2)
-+#define QCA955X_SGMII_RESET_TX_125M_N BIT(3)
-+#define QCA955X_SGMII_RESET_HW_RX_125M_N BIT(4)
-+
- #define QCA955X_SGMII_SERDES_LOCK_DETECT_STATUS BIT(15)
- #define QCA955X_SGMII_SERDES_RES_CALIBRATION_SHIFT 23
- #define QCA955X_SGMII_SERDES_RES_CALIBRATION_MASK 0xf
-+
-+#define QCA955X_MR_AN_CONTROL_SPEED_SEL1 BIT(6)
-+#define QCA955X_MR_AN_CONTROL_DUPLEX_MODE BIT(8)
-+#define QCA955X_MR_AN_CONTROL_RESTART_AN BIT(9)
-+#define QCA955X_MR_AN_CONTROL_POWER_DOWN BIT(11)
-+#define QCA955X_MR_AN_CONTROL_AN_ENABLE BIT(12)
-+#define QCA955X_MR_AN_CONTROL_SPEED_SEL0 BIT(13)
-+#define QCA955X_MR_AN_CONTROL_LOOPBACK BIT(14)
-+#define QCA955X_MR_AN_CONTROL_PHY_RESET BIT(15)
-+
-+#define QCA955X_MR_AN_STATUS_EXT_CAP BIT(0)
-+#define QCA955X_MR_AN_STATUS_LINK_UP BIT(2)
-+#define QCA955X_MR_AN_STATUS_AN_ABILITY BIT(3)
-+#define QCA955X_MR_AN_STATUS_REMOTE_FAULT BIT(4)
-+#define QCA955X_MR_AN_STATUS_AN_COMPLETE BIT(5)
-+#define QCA955X_MR_AN_STATUS_NO_PREAMBLE BIT(6)
-+#define QCA955X_MR_AN_STATUS_BASE_PAGE BIT(7)
-+
-+#define QCA955X_SGMII_CONFIG_MODE_CTRL_SHIFT 0
-+#define QCA955X_SGMII_CONFIG_MODE_CTRL_MASK 0x7
-+#define QCA955X_SGMII_CONFIG_ENABLE_SGMII_TX_PAUSE BIT(3)
-+#define QCA955X_SGMII_CONFIG_MR_REG4_CHANGED BIT(4)
-+#define QCA955X_SGMII_CONFIG_FORCE_SPEED BIT(5)
-+#define QCA955X_SGMII_CONFIG_SPEED_SHIFT 6
-+#define QCA955X_SGMII_CONFIG_SPEED_MASK 0xc0
-+#define QCA955X_SGMII_CONFIG_REMOTE_PHY_LOOPBACK BIT(8)
-+#define QCA955X_SGMII_CONFIG_NEXT_PAGE_LOADED BIT(9)
-+#define QCA955X_SGMII_CONFIG_MDIO_ENABLE BIT(10)
-+#define QCA955X_SGMII_CONFIG_MDIO_PULSE BIT(11)
-+#define QCA955X_SGMII_CONFIG_MDIO_COMPLETE BIT(12)
-+#define QCA955X_SGMII_CONFIG_PRBS_ENABLE BIT(13)
-+#define QCA955X_SGMII_CONFIG_BERT_ENABLE BIT(14)
-+
-+#define QCA955X_SGMII_DEBUG_TX_STATE_MASK 0xff
-+#define QCA955X_SGMII_DEBUG_TX_STATE_SHIFT 0
-+#define QCA955X_SGMII_DEBUG_RX_STATE_MASK 0xff00
-+#define QCA955X_SGMII_DEBUG_RX_STATE_SHIFT 8
-+#define QCA955X_SGMII_DEBUG_RX_SYNC_STATE_MASK 0xff0000
-+#define QCA955X_SGMII_DEBUG_RX_SYNC_STATE_SHIFT 16
-+#define QCA955X_SGMII_DEBUG_ARB_STATE_MASK 0xf000000
-+#define QCA955X_SGMII_DEBUG_ARB_STATE_SHIFT 24
-+
- /*
- * QCA956X GMAC Interface
- */
+++ /dev/null
-Until upstream commit 6d4cd041f0af("net: phy: at803x: disable delay
-only for RGMII mode"), delays were not disabled on driver probe
-for the Atheros AR803x PHYs, although the RX delay is enabled on
-soft and hard reset.
-
-In addition, the TX delay setting is retained on soft-reset.
-
-This patch disables both delays on config init to align the behavior
-with kernel 5.1 and higher. It can be safely dropped with kernel 5.1.
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -279,6 +279,14 @@ static int at803x_config_init(struct phy
- if (ret < 0)
- return ret;
-
-+ /* Disable RX delay */
-+ at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_0,
-+ AT803X_DEBUG_RX_CLK_DLY_EN, 0);
-+
-+ /* Disable TX delay */
-+ at803x_debug_reg_mask(phydev, AT803X_DEBUG_REG_5,
-+ AT803X_DEBUG_TX_CLK_DLY_EN, 0);
-+
- if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID ||
- phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
- ret = at803x_enable_rx_delay(phydev);
+++ /dev/null
---- a/arch/mips/ath79/clock.c
-+++ b/arch/mips/ath79/clock.c
-@@ -42,6 +42,7 @@ static const char * const clk_names[ATH7
- [ATH79_CLK_AHB] = "ahb",
- [ATH79_CLK_REF] = "ref",
- [ATH79_CLK_MDIO] = "mdio",
-+ [ATH79_CLK_UART1] = "uart1",
- };
-
- static const char * __init ath79_clk_name(int type)
-@@ -346,6 +347,9 @@ static void __init ar934x_clocks_init(vo
- if (clk_ctrl & AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL)
- ath79_set_clk(ATH79_CLK_MDIO, 100 * 1000 * 1000);
-
-+ if (clk_ctrl & AR934X_PLL_SWITCH_CLOCK_CONTROL_UART1_CLK_SEL)
-+ ath79_set_clk(ATH79_CLK_UART1, 100 * 1000 * 1000);
-+
- iounmap(dpll_base);
- }
-
-@@ -651,6 +655,9 @@ static void __init ath79_clocks_init_dt(
- if (!clks[ATH79_CLK_MDIO])
- clks[ATH79_CLK_MDIO] = clks[ATH79_CLK_REF];
-
-+ if (!clks[ATH79_CLK_UART1])
-+ clks[ATH79_CLK_UART1] = clks[ATH79_CLK_REF];
-+
- if (of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data)) {
- pr_err("%pOF: could not register clk provider\n", np);
- goto err_iounmap;
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -351,6 +351,7 @@
- #define AR934X_PLL_CPU_DDR_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
-
- #define AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL BIT(6)
-+#define AR934X_PLL_SWITCH_CLOCK_CONTROL_UART1_CLK_SEL BIT(7)
-
- #define QCA953X_PLL_CPU_CONFIG_REG 0x00
- #define QCA953X_PLL_DDR_CONFIG_REG 0x04
---- a/include/dt-bindings/clock/ath79-clk.h
-+++ b/include/dt-bindings/clock/ath79-clk.h
-@@ -15,7 +15,8 @@
- #define ATH79_CLK_AHB 2
- #define ATH79_CLK_REF 3
- #define ATH79_CLK_MDIO 4
-+#define ATH79_CLK_UART1 5
-
--#define ATH79_CLK_END 5
-+#define ATH79_CLK_END 6
-
- #endif /* __DT_BINDINGS_ATH79_CLK_H */
+++ /dev/null
-HACK: register the GPIO driver earlier to ensure that gpio_request calls
-from mach files succeed.
-
---- a/drivers/gpio/gpio-ath79.c
-+++ b/drivers/gpio/gpio-ath79.c
-@@ -325,7 +325,11 @@ static struct platform_driver ath79_gpio
- .remove = ath79_gpio_remove,
- };
-
--module_platform_driver(ath79_gpio_driver);
-+static int __init ath79_gpio_init(void)
-+{
-+ return platform_driver_register(&ath79_gpio_driver);
-+}
-+postcore_initcall(ath79_gpio_init);
-
- MODULE_DESCRIPTION("Atheros AR71XX/AR724X/AR913X GPIO API support");
- MODULE_LICENSE("GPL v2");
+++ /dev/null
-From 7945f929f1a77a1c8887a97ca07f87626858ff42 Mon Sep 17 00:00:00 2001
-From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
-Date: Wed, 20 Feb 2019 11:12:39 +0000
-Subject: [PATCH] drivers: provide devm_platform_ioremap_resource()
-
-There are currently 1200+ instances of using platform_get_resource()
-and devm_ioremap_resource() together in the kernel tree.
-
-This patch wraps these two calls in a single helper. Thanks to that
-we don't have to declare a local variable for struct resource * and can
-omit the redundant argument for resource type. We also have one
-function call less.
-
-Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
-Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/base/platform.c | 18 ++++++++++++++++++
- include/linux/platform_device.h | 3 +++
- 2 files changed, 21 insertions(+)
-
---- a/drivers/base/platform.c
-+++ b/drivers/base/platform.c
-@@ -81,6 +81,24 @@ struct resource *platform_get_resource(s
- EXPORT_SYMBOL_GPL(platform_get_resource);
-
- /**
-+ * devm_platform_ioremap_resource - call devm_ioremap_resource() for a platform
-+ * device
-+ *
-+ * @pdev: platform device to use both for memory resource lookup as well as
-+ * resource managemend
-+ * @index: resource index
-+ */
-+void __iomem *devm_platform_ioremap_resource(struct platform_device *pdev,
-+ unsigned int index)
-+{
-+ struct resource *res;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, index);
-+ return devm_ioremap_resource(&pdev->dev, res);
-+}
-+EXPORT_SYMBOL_GPL(devm_platform_ioremap_resource);
-+
-+/**
- * platform_get_irq - get an IRQ for a device
- * @dev: platform device
- * @num: IRQ number index
---- a/include/linux/platform_device.h
-+++ b/include/linux/platform_device.h
-@@ -51,6 +51,9 @@ extern struct device platform_bus;
- extern void arch_setup_pdev_archdata(struct platform_device *);
- extern struct resource *platform_get_resource(struct platform_device *,
- unsigned int, unsigned int);
-+extern void __iomem *
-+devm_platform_ioremap_resource(struct platform_device *pdev,
-+ unsigned int index);
- extern int platform_get_irq(struct platform_device *, unsigned int);
- extern int platform_irq_count(struct platform_device *);
- extern struct resource *platform_get_resource_byname(struct platform_device *,
+++ /dev/null
-From 7e161c423a232ef7ddf6c11b09ebe471dd5a23cf Mon Sep 17 00:00:00 2001
-From: Chuanhong Guo <gch981213@gmail.com>
-Date: Wed, 5 Feb 2020 18:25:37 +0800
-Subject: [PATCH v4 1/2] spi: add driver for ar934x spi controller
-
-This patch adds driver for SPI controller found in Qualcomm Atheros
-AR934x/QCA95xx SoCs.
-This controller is a superset of the already supported qca,ar7100-spi.
-Besides the bit-bang mode in spi-ath79.c, this new controller added
-a new "shift register" mode, allowing faster spi operations.
-
-Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
----
- drivers/spi/Kconfig | 7 ++
- drivers/spi/Makefile | 1 +
- drivers/spi/spi-ar934x.c | 235 +++++++++++++++++++++++++++++++++++++++
- 3 files changed, 243 insertions(+)
- create mode 100644 drivers/spi/spi-ar934x.c
-
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -61,6 +61,13 @@ config SPI_ALTERA
- help
- This is the driver for the Altera SPI Controller.
-
-+config SPI_AR934X
-+ tristate "Qualcomm Atheros AR934X/QCA95XX SPI controller driver"
-+ depends on ATH79 || COMPILE_TEST
-+ help
-+ This enables support for the SPI controller present on the
-+ Qualcomm Atheros AR934X/QCA95XX SoCs.
-+
- config SPI_ATH79
- tristate "Atheros AR71XX/AR724X/AR913X SPI controller driver"
- depends on ATH79 && GPIOLIB
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -14,6 +14,7 @@ obj-$(CONFIG_SPI_LOOPBACK_TEST) += spi-
-
- # SPI master controller drivers (bus)
- obj-$(CONFIG_SPI_ALTERA) += spi-altera.o
-+obj-$(CONFIG_SPI_AR934X) += spi-ar934x.o
- obj-$(CONFIG_SPI_ARMADA_3700) += spi-armada-3700.o
- obj-$(CONFIG_SPI_ATMEL) += spi-atmel.o
- obj-$(CONFIG_SPI_ATH79) += spi-ath79.o
---- /dev/null
-+++ b/drivers/spi/spi-ar934x.c
-@@ -0,0 +1,235 @@
-+// SPDX-License-Identifier: GPL-2.0
-+//
-+// SPI controller driver for Qualcomm Atheros AR934x/QCA95xx SoCs
-+//
-+// Copyright (C) 2020 Chuanhong Guo <gch981213@gmail.com>
-+//
-+// Based on spi-mt7621.c:
-+// Copyright (C) 2011 Sergiy <piratfm@gmail.com>
-+// Copyright (C) 2011-2013 Gabor Juhos <juhosg@openwrt.org>
-+// Copyright (C) 2014-2015 Felix Fietkau <nbd@nbd.name>
-+
-+#include <linux/clk.h>
-+#include <linux/io.h>
-+#include <linux/iopoll.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/of_device.h>
-+#include <linux/spi/spi.h>
-+
-+#define DRIVER_NAME "spi-ar934x"
-+
-+#define AR934X_SPI_REG_FS 0x00
-+#define AR934X_SPI_ENABLE BIT(0)
-+
-+#define AR934X_SPI_REG_IOC 0x08
-+#define AR934X_SPI_IOC_INITVAL 0x70000
-+
-+#define AR934X_SPI_REG_CTRL 0x04
-+#define AR934X_SPI_CLK_MASK GENMASK(5, 0)
-+
-+#define AR934X_SPI_DATAOUT 0x10
-+
-+#define AR934X_SPI_REG_SHIFT_CTRL 0x14
-+#define AR934X_SPI_SHIFT_EN BIT(31)
-+#define AR934X_SPI_SHIFT_CS(n) BIT(28 + (n))
-+#define AR934X_SPI_SHIFT_TERM 26
-+#define AR934X_SPI_SHIFT_VAL(cs, term, count) \
-+ (AR934X_SPI_SHIFT_EN | AR934X_SPI_SHIFT_CS(cs) | \
-+ (term) << AR934X_SPI_SHIFT_TERM | (count))
-+
-+#define AR934X_SPI_DATAIN 0x18
-+
-+struct ar934x_spi {
-+ struct spi_controller *ctlr;
-+ void __iomem *base;
-+ struct clk *clk;
-+ unsigned int clk_freq;
-+};
-+
-+static inline int ar934x_spi_clk_div(struct ar934x_spi *sp, unsigned int freq)
-+{
-+ int div = DIV_ROUND_UP(sp->clk_freq, freq * 2) - 1;
-+
-+ if (div < 0)
-+ return 0;
-+ else if (div > AR934X_SPI_CLK_MASK)
-+ return -EINVAL;
-+ else
-+ return div;
-+}
-+
-+static int ar934x_spi_setup(struct spi_device *spi)
-+{
-+ struct ar934x_spi *sp = spi_controller_get_devdata(spi->master);
-+
-+ if ((spi->max_speed_hz == 0) ||
-+ (spi->max_speed_hz > (sp->clk_freq / 2))) {
-+ spi->max_speed_hz = sp->clk_freq / 2;
-+ } else if (spi->max_speed_hz < (sp->clk_freq / 128)) {
-+ dev_err(&spi->dev, "spi clock is too low\n");
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+static int ar934x_spi_transfer_one_message(struct spi_controller *master,
-+ struct spi_message *m)
-+{
-+ struct ar934x_spi *sp = spi_controller_get_devdata(master);
-+ struct spi_transfer *t = NULL;
-+ struct spi_device *spi = m->spi;
-+ unsigned long trx_done, trx_cur;
-+ int stat = 0;
-+ u8 term = 0;
-+ int div, i;
-+ u32 reg;
-+ const u8 *tx_buf;
-+ u8 *buf;
-+
-+ m->actual_length = 0;
-+ list_for_each_entry(t, &m->transfers, transfer_list) {
-+ if (t->speed_hz)
-+ div = ar934x_spi_clk_div(sp, t->speed_hz);
-+ else
-+ div = ar934x_spi_clk_div(sp, spi->max_speed_hz);
-+ if (div < 0) {
-+ stat = -EIO;
-+ goto msg_done;
-+ }
-+
-+ reg = ioread32(sp->base + AR934X_SPI_REG_CTRL);
-+ reg &= ~AR934X_SPI_CLK_MASK;
-+ reg |= div;
-+ iowrite32(reg, sp->base + AR934X_SPI_REG_CTRL);
-+ iowrite32(0, sp->base + AR934X_SPI_DATAOUT);
-+
-+ for (trx_done = 0; trx_done < t->len; trx_done += 4) {
-+ trx_cur = t->len - trx_done;
-+ if (trx_cur > 4)
-+ trx_cur = 4;
-+ else if (list_is_last(&t->transfer_list, &m->transfers))
-+ term = 1;
-+
-+ if (t->tx_buf) {
-+ tx_buf = t->tx_buf + trx_done;
-+ reg = tx_buf[0];
-+ for (i = 1; i < trx_cur; i++)
-+ reg = reg << 8 | tx_buf[i];
-+ iowrite32(reg, sp->base + AR934X_SPI_DATAOUT);
-+ }
-+
-+ reg = AR934X_SPI_SHIFT_VAL(spi->chip_select, term,
-+ trx_cur * 8);
-+ iowrite32(reg, sp->base + AR934X_SPI_REG_SHIFT_CTRL);
-+ stat = readl_poll_timeout(
-+ sp->base + AR934X_SPI_REG_SHIFT_CTRL, reg,
-+ !(reg & AR934X_SPI_SHIFT_EN), 0, 5);
-+ if (stat < 0)
-+ goto msg_done;
-+
-+ if (t->rx_buf) {
-+ reg = ioread32(sp->base + AR934X_SPI_DATAIN);
-+ buf = t->rx_buf + trx_done;
-+ for (i = 0; i < trx_cur; i++) {
-+ buf[trx_cur - i - 1] = reg & 0xff;
-+ reg >>= 8;
-+ }
-+ }
-+ }
-+ m->actual_length += t->len;
-+ }
-+
-+msg_done:
-+ m->status = stat;
-+ spi_finalize_current_message(master);
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id ar934x_spi_match[] = {
-+ { .compatible = "qca,ar934x-spi" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, ar934x_spi_match);
-+
-+static int ar934x_spi_probe(struct platform_device *pdev)
-+{
-+ struct spi_controller *ctlr;
-+ struct ar934x_spi *sp;
-+ void __iomem *base;
-+ struct clk *clk;
-+ int ret;
-+
-+ base = devm_platform_ioremap_resource(pdev, 0);
-+ if (IS_ERR(base))
-+ return PTR_ERR(base);
-+
-+ clk = devm_clk_get(&pdev->dev, NULL);
-+ if (IS_ERR(clk)) {
-+ dev_err(&pdev->dev, "failed to get clock\n");
-+ return PTR_ERR(clk);
-+ }
-+
-+ ret = clk_prepare_enable(clk);
-+ if (ret)
-+ return ret;
-+
-+ ctlr = spi_alloc_master(&pdev->dev, sizeof(*sp));
-+ if (!ctlr) {
-+ dev_info(&pdev->dev, "failed to allocate spi controller\n");
-+ return -ENOMEM;
-+ }
-+
-+ /* disable flash mapping and expose spi controller registers */
-+ iowrite32(AR934X_SPI_ENABLE, base + AR934X_SPI_REG_FS);
-+ /* restore pins to default state: CSn=1 DO=CLK=0 */
-+ iowrite32(AR934X_SPI_IOC_INITVAL, base + AR934X_SPI_REG_IOC);
-+
-+ ctlr->mode_bits = SPI_LSB_FIRST;
-+ ctlr->setup = ar934x_spi_setup;
-+ ctlr->transfer_one_message = ar934x_spi_transfer_one_message;
-+ ctlr->bits_per_word_mask = SPI_BPW_MASK(8);
-+ ctlr->dev.of_node = pdev->dev.of_node;
-+ ctlr->num_chipselect = 3;
-+
-+ dev_set_drvdata(&pdev->dev, ctlr);
-+
-+ sp = spi_controller_get_devdata(ctlr);
-+ sp->base = base;
-+ sp->clk = clk;
-+ sp->clk_freq = clk_get_rate(clk);
-+ sp->ctlr = ctlr;
-+
-+ return devm_spi_register_controller(&pdev->dev, ctlr);
-+}
-+
-+static int ar934x_spi_remove(struct platform_device *pdev)
-+{
-+ struct spi_controller *ctlr;
-+ struct ar934x_spi *sp;
-+
-+ ctlr = dev_get_drvdata(&pdev->dev);
-+ sp = spi_controller_get_devdata(ctlr);
-+
-+ clk_disable_unprepare(sp->clk);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver ar934x_spi_driver = {
-+ .driver = {
-+ .name = DRIVER_NAME,
-+ .of_match_table = ar934x_spi_match,
-+ },
-+ .probe = ar934x_spi_probe,
-+ .remove = ar934x_spi_remove,
-+};
-+
-+module_platform_driver(ar934x_spi_driver);
-+
-+MODULE_DESCRIPTION("SPI controller driver for Qualcomm Atheros AR934x/QCA95xx");
-+MODULE_AUTHOR("Chuanhong Guo <gch981213@gmail.com>");
-+MODULE_LICENSE("GPL v2");
-+MODULE_ALIAS("platform:" DRIVER_NAME);
+++ /dev/null
-From patchwork Fri Feb 7 09:53:35 2020
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-X-Patchwork-Submitter: Daniel Golle <daniel@makrotopia.org>
-X-Patchwork-Id: 1190470
-Date: Fri, 7 Feb 2020 11:53:35 +0200
-From: Daniel Golle <daniel@makrotopia.org>
-To: linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org
-Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
- Jiri Slaby <jslaby@suse.com>,
- Chuanhong Guo <gch981213@gmail.com>,
- Eitan Cohen <eitan@neot-semadar.com>,
- Ori Gofen <origofen@gmail.com>
-Subject: [PATCH] serial: ar933x_uart: set UART_CS_{RX,TX}_READY_ORIDE
-Message-ID: <20200207095335.GA179836@makrotopia.org>
-MIME-Version: 1.0
-Content-Disposition: inline
-Sender: linux-kernel-owner@vger.kernel.org
-Precedence: bulk
-List-ID: <linux-kernel.vger.kernel.org>
-X-Mailing-List: linux-kernel@vger.kernel.org
-
-On AR934x this UART is usually not initialized by the bootloader
-as it is only used as a secondary serial port while the primary
-UART is a newly introduced NS16550-compatible.
-In order to make use of the ar933x-uart on AR934x without RTS/CTS
-hardware flow control, one needs to set the
-UART_CS_{RX,TX}_READY_ORIDE bits as other than on AR933x where this
-UART is used as primary/console, the bootloader on AR934x typically
-doesn't set those bits.
-Setting them explicitely on AR933x should not do any harm, so just
-set them unconditionally.
-
-Tested-by: Chuanhong Guo <gch981213@gmail.com>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/tty/serial/ar933x_uart.c | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/drivers/tty/serial/ar933x_uart.c
-+++ b/drivers/tty/serial/ar933x_uart.c
-@@ -290,6 +290,10 @@ static void ar933x_uart_set_termios(stru
- ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
- AR933X_UART_CS_TX_READY_ORIDE | AR933X_UART_CS_RX_READY_ORIDE);
-
-+ /* enable RX and TX ready overide */
-+ ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
-+ AR933X_UART_CS_TX_READY_ORIDE | AR933X_UART_CS_RX_READY_ORIDE);
-+
- /* reenable the UART */
- ar933x_uart_rmw(up, AR933X_UART_CS_REG,
- AR933X_UART_CS_IF_MODE_M << AR933X_UART_CS_IF_MODE_S,
-@@ -424,6 +428,10 @@ static int ar933x_uart_startup(struct ua
-
- /* enable RX and TX ready overide */
- ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
-+ AR933X_UART_CS_TX_READY_ORIDE | AR933X_UART_CS_RX_READY_ORIDE);
-+
-+ /* enable RX and TX ready overide */
-+ ar933x_uart_rmw_set(up, AR933X_UART_CS_REG,
- AR933X_UART_CS_TX_READY_ORIDE | AR933X_UART_CS_RX_READY_ORIDE);
-
- /* Enable RX interrupts */
+++ /dev/null
-From patchwork Fri Feb 21 21:23:31 2020
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-X-Patchwork-Submitter: Daniel Golle <daniel@makrotopia.org>
-X-Patchwork-Id: 1198835
-Date: Fri, 21 Feb 2020 22:23:31 +0100
-From: Daniel Golle <daniel@makrotopia.org>
-To: linux-serial@vger.kernel.org, linux-kernel@vger.kernel.org
-Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
- Jiri Slaby <jslaby@suse.com>, Petr =?utf-8?q?=C5=A0tetiar?= <ynezz@true.cz>,
- Chuanhong Guo <gch981213@gmail.com>, Piotr Dymacz <pepe2k@gmail.com>
-Subject: [PATCH v2] serial: ar933x_uart: add RS485 support
-Message-ID: <20200221212331.GA21467@makrotopia.org>
-MIME-Version: 1.0
-Content-Disposition: inline
-Sender: linux-kernel-owner@vger.kernel.org
-Precedence: bulk
-List-ID: <linux-kernel.vger.kernel.org>
-X-Mailing-List: linux-kernel@vger.kernel.org
-
-Emulate half-duplex operation and use mctrl_gpio to add support for
-RS485 tranceiver with transmit/receive switch hooked to RTS GPIO line.
-This is needed to make use of the RS485 port found on Teltonika RUT955.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
-v2: use bool to indicate ongoing half-duplex send, use it afterwards
- to decide whether we've just been in a send operation.
-
- drivers/tty/serial/Kconfig | 1 +
- drivers/tty/serial/ar933x_uart.c | 113 +++++++++++++++++++++++++++++--
- 2 files changed, 108 insertions(+), 6 deletions(-)
-
---- a/drivers/tty/serial/Kconfig
-+++ b/drivers/tty/serial/Kconfig
-@@ -1296,6 +1296,7 @@ config SERIAL_AR933X
- tristate "AR933X serial port support"
- depends on HAVE_CLK && ATH79
- select SERIAL_CORE
-+ select SERIAL_MCTRL_GPIO if GPIOLIB
- help
- If you have an Atheros AR933X SOC based board and want to use the
- built-in UART of the SoC, say Y to this option.
---- a/drivers/tty/serial/ar933x_uart.c
-+++ b/drivers/tty/serial/ar933x_uart.c
-@@ -13,6 +13,7 @@
- #include <linux/console.h>
- #include <linux/sysrq.h>
- #include <linux/delay.h>
-+#include <linux/gpio/consumer.h>
- #include <linux/platform_device.h>
- #include <linux/of.h>
- #include <linux/of_platform.h>
-@@ -29,6 +30,8 @@
-
- #include <asm/mach-ath79/ar933x_uart.h>
-
-+#include "serial_mctrl_gpio.h"
-+
- #define DRIVER_NAME "ar933x-uart"
-
- #define AR933X_UART_MAX_SCALE 0xff
-@@ -47,6 +50,8 @@ struct ar933x_uart_port {
- unsigned int min_baud;
- unsigned int max_baud;
- struct clk *clk;
-+ struct mctrl_gpios *gpios;
-+ struct gpio_desc *rts_gpiod;
- };
-
- static inline unsigned int ar933x_uart_read(struct ar933x_uart_port *up,
-@@ -100,6 +105,18 @@ static inline void ar933x_uart_stop_tx_i
- ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier);
- }
-
-+static inline void ar933x_uart_start_rx_interrupt(struct ar933x_uart_port *up)
-+{
-+ up->ier |= AR933X_UART_INT_RX_VALID;
-+ ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier);
-+}
-+
-+static inline void ar933x_uart_stop_rx_interrupt(struct ar933x_uart_port *up)
-+{
-+ up->ier &= ~AR933X_UART_INT_RX_VALID;
-+ ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier);
-+}
-+
- static inline void ar933x_uart_putc(struct ar933x_uart_port *up, int ch)
- {
- unsigned int rdata;
-@@ -125,11 +142,21 @@ static unsigned int ar933x_uart_tx_empty
-
- static unsigned int ar933x_uart_get_mctrl(struct uart_port *port)
- {
-- return TIOCM_CAR;
-+ struct ar933x_uart_port *up =
-+ container_of(port, struct ar933x_uart_port, port);
-+ int ret = TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
-+
-+ mctrl_gpio_get(up->gpios, &ret);
-+
-+ return ret;
- }
-
- static void ar933x_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
- {
-+ struct ar933x_uart_port *up =
-+ container_of(port, struct ar933x_uart_port, port);
-+
-+ mctrl_gpio_set(up->gpios, mctrl);
- }
-
- static void ar933x_uart_start_tx(struct uart_port *port)
-@@ -140,6 +167,37 @@ static void ar933x_uart_start_tx(struct
- ar933x_uart_start_tx_interrupt(up);
- }
-
-+static void ar933x_uart_wait_tx_complete(struct ar933x_uart_port *up)
-+{
-+ unsigned int status;
-+ unsigned int timeout = 60000;
-+
-+ /* Wait up to 60ms for the character(s) to be sent. */
-+ do {
-+ status = ar933x_uart_read(up, AR933X_UART_CS_REG);
-+ if (--timeout == 0)
-+ break;
-+ udelay(1);
-+ } while (status & AR933X_UART_CS_TX_BUSY);
-+
-+ if (timeout == 0)
-+ dev_err(up->port.dev, "waiting for TX timed out\n");
-+}
-+
-+static void ar933x_uart_rx_flush(struct ar933x_uart_port *up)
-+{
-+ unsigned int status;
-+
-+ /* clear RX_VALID interrupt */
-+ ar933x_uart_write(up, AR933X_UART_INT_REG, AR933X_UART_INT_RX_VALID);
-+
-+ /* remove characters from the RX FIFO */
-+ do {
-+ ar933x_uart_write(up, AR933X_UART_DATA_REG, AR933X_UART_DATA_RX_CSR);
-+ status = ar933x_uart_read(up, AR933X_UART_DATA_REG);
-+ } while (status & AR933X_UART_DATA_RX_CSR);
-+}
-+
- static void ar933x_uart_stop_tx(struct uart_port *port)
- {
- struct ar933x_uart_port *up =
-@@ -153,8 +211,7 @@ static void ar933x_uart_stop_rx(struct u
- struct ar933x_uart_port *up =
- container_of(port, struct ar933x_uart_port, port);
-
-- up->ier &= ~AR933X_UART_INT_RX_VALID;
-- ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier);
-+ ar933x_uart_stop_rx_interrupt(up);
- }
-
- static void ar933x_uart_break_ctl(struct uart_port *port, int break_state)
-@@ -340,11 +397,20 @@ static void ar933x_uart_rx_chars(struct
- static void ar933x_uart_tx_chars(struct ar933x_uart_port *up)
- {
- struct circ_buf *xmit = &up->port.state->xmit;
-+ struct serial_rs485 *rs485conf = &up->port.rs485;
- int count;
-+ bool half_duplex_send = false;
-
- if (uart_tx_stopped(&up->port))
- return;
-
-+ if ((rs485conf->flags & SER_RS485_ENABLED) &&
-+ (up->port.x_char || !uart_circ_empty(xmit))) {
-+ ar933x_uart_stop_rx_interrupt(up);
-+ gpiod_set_value(up->rts_gpiod, !!(rs485conf->flags & SER_RS485_RTS_ON_SEND));
-+ half_duplex_send = true;
-+ }
-+
- count = up->port.fifosize;
- do {
- unsigned int rdata;
-@@ -372,8 +438,14 @@ static void ar933x_uart_tx_chars(struct
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(&up->port);
-
-- if (!uart_circ_empty(xmit))
-+ if (!uart_circ_empty(xmit)) {
- ar933x_uart_start_tx_interrupt(up);
-+ } else if (half_duplex_send) {
-+ ar933x_uart_wait_tx_complete(up);
-+ ar933x_uart_rx_flush(up);
-+ ar933x_uart_start_rx_interrupt(up);
-+ gpiod_set_value(up->rts_gpiod, !!(rs485conf->flags & SER_RS485_RTS_AFTER_SEND));
-+ }
- }
-
- static irqreturn_t ar933x_uart_interrupt(int irq, void *dev_id)
-@@ -435,8 +507,7 @@ static int ar933x_uart_startup(struct ua
- AR933X_UART_CS_TX_READY_ORIDE | AR933X_UART_CS_RX_READY_ORIDE);
-
- /* Enable RX interrupts */
-- up->ier = AR933X_UART_INT_RX_VALID;
-- ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier);
-+ ar933x_uart_start_rx_interrupt(up);
-
- spin_unlock_irqrestore(&up->port.lock, flags);
-
-@@ -519,6 +590,21 @@ static const struct uart_ops ar933x_uart
- .verify_port = ar933x_uart_verify_port,
- };
-
-+static int ar933x_config_rs485(struct uart_port *port,
-+ struct serial_rs485 *rs485conf)
-+{
-+ struct ar933x_uart_port *up =
-+ container_of(port, struct ar933x_uart_port, port);
-+
-+ if ((rs485conf->flags & SER_RS485_ENABLED) &&
-+ !up->rts_gpiod) {
-+ dev_err(port->dev, "RS485 needs rts-gpio\n");
-+ return 1;
-+ }
-+ port->rs485 = *rs485conf;
-+ return 0;
-+}
-+
- #ifdef CONFIG_SERIAL_AR933X_CONSOLE
- static struct ar933x_uart_port *
- ar933x_console_ports[CONFIG_SERIAL_AR933X_NR_UARTS];
-@@ -688,6 +774,8 @@ static int ar933x_uart_probe(struct plat
- goto err_disable_clk;
- }
-
-+ uart_get_rs485_mode(&pdev->dev, &port->rs485);
-+
- port->mapbase = mem_res->start;
- port->line = id;
- port->irq = irq_res->start;
-@@ -698,6 +786,7 @@ static int ar933x_uart_probe(struct plat
- port->regshift = 2;
- port->fifosize = AR933X_UART_FIFO_SIZE;
- port->ops = &ar933x_uart_ops;
-+ port->rs485_config = ar933x_config_rs485;
-
- baud = ar933x_uart_get_baud(port->uartclk, AR933X_UART_MAX_SCALE, 1);
- up->min_baud = max_t(unsigned int, baud, AR933X_UART_MIN_BAUD);
-@@ -705,6 +794,18 @@ static int ar933x_uart_probe(struct plat
- baud = ar933x_uart_get_baud(port->uartclk, 0, AR933X_UART_MAX_STEP);
- up->max_baud = min_t(unsigned int, baud, AR933X_UART_MAX_BAUD);
-
-+ up->gpios = mctrl_gpio_init(port, 0);
-+ if (IS_ERR(up->gpios) && PTR_ERR(up->gpios) != -ENOSYS)
-+ return PTR_ERR(up->gpios);
-+
-+ up->rts_gpiod = mctrl_gpio_to_gpiod(up->gpios, UART_GPIO_RTS);
-+
-+ if ((port->rs485.flags & SER_RS485_ENABLED) &&
-+ !up->rts_gpiod) {
-+ dev_err(&pdev->dev, "lacking rts-gpio, disabling RS485\n");
-+ port->rs485.flags &= ~SER_RS485_ENABLED;
-+ }
-+
- #ifdef CONFIG_SERIAL_AR933X_CONSOLE
- ar933x_console_ports[up->port.line] = up;
- #endif
+++ /dev/null
-From: David Bauer <mail@david-bauer.net>
-Date: Sat, 11 Apr 2020 14:03:12 +0200
-Subject: MIPS: pci-ar724x: add QCA9550 reset sequence
-
-The QCA9550 family of SoCs have a slightly different reset
-sequence compared to older chips.
-
-Normally the bootloader performs this sequence, however
-some bootloader implementation expect the operating system
-to clear the reset.
-
-Also get the resets from OF to support handling of the second
-PCIe root-complex on the QCA9558.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
-
---- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
-@@ -394,6 +394,7 @@
- #define QCA955X_PLL_CPU_CONFIG_REG 0x00
- #define QCA955X_PLL_DDR_CONFIG_REG 0x04
- #define QCA955X_PLL_CLK_CTRL_REG 0x08
-+#define QCA955X_PLL_PCIE_CONFIG_REG 0x0c
- #define QCA955X_PLL_ETH_XMII_CONTROL_REG 0x28
- #define QCA955X_PLL_ETH_SGMII_CONTROL_REG 0x48
- #define QCA955X_PLL_ETH_SGMII_SERDES_REG 0x4c
-@@ -479,6 +480,9 @@
- #define QCA956X_PLL_CLK_CTRL_CPU_DDRCLK_FROM_CPUPLL BIT(21)
- #define QCA956X_PLL_CLK_CTRL_AHBCLK_FROM_DDRPLL BIT(24)
-
-+#define QCA955X_PLL_PCIE_CONFIG_PLL_PWD BIT(30)
-+#define QCA955X_PLL_PCIE_CONFIG_PLL_BYPASS BIT(16)
-+
- #define QCA956X_PLL_SWITCH_CLOCK_SPARE_I2C_CLK_SELB BIT(5)
- #define QCA956X_PLL_SWITCH_CLOCK_SPARE_MDIO_CLK_SEL0_1 BIT(6)
- #define QCA956X_PLL_SWITCH_CLOCK_SPARE_UART1_CLK_SEL BIT(7)
---- a/arch/mips/pci/pci-ar724x.c
-+++ b/arch/mips/pci/pci-ar724x.c
-@@ -11,6 +11,7 @@
-
- #include <linux/irq.h>
- #include <linux/pci.h>
-+#include <linux/reset.h>
- #include <linux/init.h>
- #include <linux/delay.h>
- #include <linux/platform_device.h>
-@@ -58,6 +59,9 @@ struct ar724x_pci_controller {
- struct irq_domain *domain;
- struct resource io_res;
- struct resource mem_res;
-+
-+ struct reset_control *hc_reset;
-+ struct reset_control *phy_reset;
- };
-
- static struct irq_chip ar724x_pci_irq_chip;
-@@ -343,18 +347,30 @@ static void ar724x_pci_hw_init(struct ar
- int wait = 0;
-
- /* deassert PCIe host controller and PCIe PHY reset */
-- ath79_device_reset_clear(AR724X_RESET_PCIE);
-- ath79_device_reset_clear(AR724X_RESET_PCIE_PHY);
-+ reset_control_deassert(apc->hc_reset);
-+ reset_control_deassert(apc->phy_reset);
-
-- /* remove the reset of the PCIE PLL */
-- ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
-- ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_RESET;
-- ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
--
-- /* deassert bypass for the PCIE PLL */
-- ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
-- ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS;
-- ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
-+ if (of_device_is_compatible(apc->np, "qcom,qca9550-pci")) {
-+ /* remove the reset of the PCIE PLL */
-+ ppl = ath79_pll_rr(QCA955X_PLL_PCIE_CONFIG_REG);
-+ ppl &= ~QCA955X_PLL_PCIE_CONFIG_PLL_PWD;
-+ ath79_pll_wr(QCA955X_PLL_PCIE_CONFIG_REG, ppl);
-+
-+ /* deassert bypass for the PCIE PLL */
-+ ppl = ath79_pll_rr(QCA955X_PLL_PCIE_CONFIG_REG);
-+ ppl &= ~QCA955X_PLL_PCIE_CONFIG_PLL_BYPASS;
-+ ath79_pll_wr(QCA955X_PLL_PCIE_CONFIG_REG, ppl);
-+ } else {
-+ /* remove the reset of the PCIE PLL */
-+ ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
-+ ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_RESET;
-+ ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
-+
-+ /* deassert bypass for the PCIE PLL */
-+ ppl = ath79_pll_rr(AR724X_PLL_REG_PCIE_CONFIG);
-+ ppl &= ~AR724X_PLL_REG_PCIE_CONFIG_PPL_BYPASS;
-+ ath79_pll_wr(AR724X_PLL_REG_PCIE_CONFIG, ppl);
-+ }
-
- /* set PCIE Application Control to ready */
- app = __raw_readl(apc->ctrl_base + AR724X_PCI_REG_APP);
-@@ -402,6 +418,14 @@ static int ar724x_pci_probe(struct platf
- if (apc->irq < 0)
- return -EINVAL;
-
-+ apc->hc_reset = devm_reset_control_get_exclusive(&pdev->dev, "hc");
-+ if (IS_ERR(apc->hc_reset))
-+ return PTR_ERR(apc->hc_reset);
-+
-+ apc->phy_reset = devm_reset_control_get_exclusive(&pdev->dev, "phy");
-+ if (IS_ERR(apc->phy_reset))
-+ return PTR_ERR(apc->phy_reset);
-+
- apc->np = pdev->dev.of_node;
- apc->pci_controller.pci_ops = &ar724x_pci_ops;
- apc->pci_controller.io_resource = &apc->io_res;
-@@ -412,7 +436,7 @@ static int ar724x_pci_probe(struct platf
- * Do the full PCIE Root Complex Initialization Sequence if the PCIe
- * host controller is in reset.
- */
-- if (ath79_reset_rr(AR724X_RESET_REG_RESET_MODULE) & AR724X_RESET_PCIE)
-+ if (reset_control_status(apc->hc_reset))
- ar724x_pci_hw_init(apc);
-
- apc->link_up = ar724x_pci_check_link(apc);
-@@ -430,6 +454,7 @@ static int ar724x_pci_probe(struct platf
-
- static const struct of_device_id ar724x_pci_ids[] = {
- { .compatible = "qcom,ar7240-pci" },
-+ { .compatible = "qcom,qca9550-pci" },
- {},
- };
-
+++ /dev/null
---- a/drivers/mtd/parsers/Makefile
-+++ b/drivers/mtd/parsers/Makefile
-@@ -1,3 +1,4 @@
-+obj-$(CONFIG_MTD_PARSER_CYBERTAN) += parser_cybertan.o
- obj-$(CONFIG_MTD_PARSER_TRX) += parser_trx.o
- obj-$(CONFIG_MTD_SHARPSL_PARTS) += sharpslpart.o
- obj-$(CONFIG_MTD_ROUTERBOOT_PARTS) += routerbootpart.o
---- a/drivers/mtd/parsers/Kconfig
-+++ b/drivers/mtd/parsers/Kconfig
-@@ -1,3 +1,11 @@
-+config MTD_PARSER_CYBERTAN
-+ tristate "Parser for Cybertan format partitions"
-+ depends on MTD && (ATH79 || COMPILE_TEST)
-+ help
-+ Cybertan has a proprietory header than encompasses a Broadcom trx
-+ header. This driver will parse the header and take care of the
-+ special offsets that result in the extra headers.
-+
- config MTD_PARSER_TRX
- tristate "Parser for TRX format partitions"
- depends on MTD && (BCM47XX || ARCH_BCM_5301X || COMPILE_TEST)
+++ /dev/null
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -76,12 +76,18 @@ static int parse_redboot_partitions(stru
- static char nullstring[] = "unallocated";
- #endif
-
-+ buf = vmalloc(master->erasesize);
-+ if (!buf)
-+ return -ENOMEM;
-+
-+ restart:
- if ( directory < 0 ) {
- offset = master->size + directory * master->erasesize;
- while (mtd_block_isbad(master, offset)) {
- if (!offset) {
- nogood:
- printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
-+ vfree(buf);
- return -EIO;
- }
- offset -= master->erasesize;
-@@ -94,10 +100,6 @@ static int parse_redboot_partitions(stru
- goto nogood;
- }
- }
-- buf = vmalloc(master->erasesize);
--
-- if (!buf)
-- return -ENOMEM;
-
- printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
- master->name, offset);
-@@ -170,6 +172,11 @@ static int parse_redboot_partitions(stru
- }
- if (i == numslots) {
- /* Didn't find it */
-+ if (offset + master->erasesize < master->size) {
-+ /* not at the end of the flash yet, maybe next block :) */
-+ directory++;
-+ goto restart;
-+ }
- printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
- master->name);
- ret = 0;
+++ /dev/null
-From 8d8cdb4a6ccee5b62cc0dc64651c3946364514dc Mon Sep 17 00:00:00 2001
-From: Luiz Angelo Daros de Luca <luizluca@gmail.com>
-Date: Mon, 10 Feb 2020 16:11:27 -0300
-Subject: [PATCH] spi: ath79: Implement the spi_mem interface
-
-Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
----
- drivers/spi/spi-ath79.c | 35 +++++++++++++++++++++++++++++++++++
- 1 file changed, 35 insertions(+)
-
---- a/drivers/spi/spi-ath79.c
-+++ b/drivers/spi/spi-ath79.c
-@@ -19,6 +19,7 @@
- #include <linux/platform_device.h>
- #include <linux/io.h>
- #include <linux/spi/spi.h>
-+#include <linux/spi/spi-mem.h>
- #include <linux/spi/spi_bitbang.h>
- #include <linux/bitops.h>
- #include <linux/gpio.h>
-@@ -203,6 +204,39 @@ static u32 ath79_spi_txrx_mode0(struct s
- return ath79_spi_rr(sp, AR71XX_SPI_REG_RDS);
- }
-
-+static int ath79_exec_mem_op(struct spi_mem *mem,
-+ const struct spi_mem_op *op)
-+{
-+ struct ath79_spi *sp = ath79_spidev_to_sp(mem->spi);
-+
-+ /* Ensures that reading is performed on device connected
-+ to hardware cs0 */
-+ if (mem->spi->chip_select || gpio_is_valid(mem->spi->cs_gpio))
-+ return -ENOTSUPP;
-+
-+ /* Only use for fast-read op. */
-+ if (op->cmd.opcode != 0x0b || op->data.dir != SPI_MEM_DATA_IN ||
-+ op->addr.nbytes != 3 || op->dummy.nbytes != 1)
-+ return -ENOTSUPP;
-+
-+ /* disable GPIO mode */
-+ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, 0);
-+
-+ memcpy_fromio(op->data.buf.in, sp->base + op->addr.val, op->data.nbytes);
-+
-+ /* enable GPIO mode */
-+ ath79_spi_wr(sp, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO);
-+
-+ /* restore IOC register */
-+ ath79_spi_wr(sp, AR71XX_SPI_REG_IOC, sp->ioc_base);
-+
-+ return 0;
-+}
-+
-+static const struct spi_controller_mem_ops ath79_mem_ops = {
-+ .exec_op = ath79_exec_mem_op,
-+};
-+
- static int ath79_spi_probe(struct platform_device *pdev)
- {
- struct spi_master *master;
-@@ -237,6 +271,7 @@ static int ath79_spi_probe(struct platfo
- ret = PTR_ERR(sp->base);
- goto err_put_master;
- }
-+ master->mem_ops = &ath79_mem_ops;
-
- sp->clk = devm_clk_get(&pdev->dev, "ahb");
- if (IS_ERR(sp->clk)) {
+++ /dev/null
---- a/drivers/net/ethernet/atheros/Kconfig
-+++ b/drivers/net/ethernet/atheros/Kconfig
-@@ -5,7 +5,7 @@
- config NET_VENDOR_ATHEROS
- bool "Atheros devices"
- default y
-- depends on PCI
-+ depends on (PCI || ATH79)
- ---help---
- If you have a network (Ethernet) card belonging to this class, say Y.
-
-@@ -78,4 +78,6 @@ config ALX
- To compile this driver as a module, choose M here. The module
- will be called alx.
-
-+source drivers/net/ethernet/atheros/ag71xx/Kconfig
-+
- endif # NET_VENDOR_ATHEROS
---- a/drivers/net/ethernet/atheros/Makefile
-+++ b/drivers/net/ethernet/atheros/Makefile
-@@ -3,6 +3,7 @@
- # Makefile for the Atheros network device drivers.
- #
-
-+obj-$(CONFIG_AG71XX) += ag71xx/
- obj-$(CONFIG_ATL1) += atlx/
- obj-$(CONFIG_ATL2) += atlx/
- obj-$(CONFIG_ATL1E) += atl1e/
+++ /dev/null
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -391,6 +391,13 @@ static int at803x_aneg_done(struct phy_d
- if (!(phy_read(phydev, AT803X_PSSR) & AT803X_PSSR_MR_AN_COMPLETE)) {
- pr_warn("803x_aneg_done: SGMII link is not ok\n");
- aneg_done = 0;
-+#ifdef CONFIG_OF_MDIO
-+ if (phydev->mdio.dev.of_node &&
-+ of_property_read_bool(phydev->mdio.dev.of_node,
-+ "at803x-override-sgmii-link-check")) {
-+ aneg_done = 1;
-+ }
-+#endif
- }
- /* switch back to copper page */
- phy_write(phydev, AT803X_REG_CHIP_CONFIG, ccr | AT803X_BT_BX_REG_SEL);
+++ /dev/null
---- a/drivers/Makefile
-+++ b/drivers/Makefile
-@@ -80,8 +80,8 @@ obj-y += scsi/
- obj-y += nvme/
- obj-$(CONFIG_ATA) += ata/
- obj-$(CONFIG_TARGET_CORE) += target/
--obj-$(CONFIG_MTD) += mtd/
- obj-$(CONFIG_SPI) += spi/
-+obj-$(CONFIG_MTD) += mtd/
- obj-$(CONFIG_SPMI) += spmi/
- obj-$(CONFIG_HSI) += hsi/
- obj-$(CONFIG_SLIMBUS) += slimbus/
+++ /dev/null
---- a/drivers/mtd/nand/raw/Kconfig
-+++ b/drivers/mtd/nand/raw/Kconfig
-@@ -561,4 +561,12 @@ config MTD_NAND_TEGRA
- is supported. Extra OOB bytes when using HW ECC are currently
- not supported.
-
-+config MTD_NAND_AR934X
-+ tristate "Support for NAND controller on Qualcomm Atheros AR934x/QCA955x SoCs"
-+ depends on ATH79 || COMPILE_TEST
-+ depends on HAS_IOMEM
-+ help
-+ Enables support for NAND controller on Qualcomm Atheros SoCs.
-+ This controller is found on AR934x and QCA955x SoCs.
-+
- endif # MTD_NAND
---- a/drivers/mtd/nand/raw/Makefile
-+++ b/drivers/mtd/nand/raw/Makefile
-@@ -57,6 +57,7 @@ obj-$(CONFIG_MTD_NAND_BRCMNAND) += brcm
- obj-$(CONFIG_MTD_NAND_QCOM) += qcom_nandc.o
- obj-$(CONFIG_MTD_NAND_MTK) += mtk_ecc.o mtk_nand.o
- obj-$(CONFIG_MTD_NAND_TEGRA) += tegra_nand.o
-+obj-$(CONFIG_MTD_NAND_AR934X) += ar934x_nand.o
-
- nand-objs := nand_base.o nand_bbt.o nand_timings.o nand_ids.o
- nand-objs += nand_amd.o
+++ /dev/null
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ath79/mangle-port.h
-@@ -0,0 +1,37 @@
-+/*
-+ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * This file was derived from: inlude/asm-mips/mach-generic/mangle-port.h
-+ * Copyright (C) 2003, 2004 Ralf Baechle
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#ifndef __ASM_MACH_ATH79_MANGLE_PORT_H
-+#define __ASM_MACH_ATH79_MANGLE_PORT_H
-+
-+#ifdef CONFIG_PCI_AR71XX
-+extern unsigned long (ath79_pci_swizzle_b)(unsigned long port);
-+extern unsigned long (ath79_pci_swizzle_w)(unsigned long port);
-+#else
-+#define ath79_pci_swizzle_b(port) (port)
-+#define ath79_pci_swizzle_w(port) (port)
-+#endif
-+
-+#define __swizzle_addr_b(port) ath79_pci_swizzle_b(port)
-+#define __swizzle_addr_w(port) ath79_pci_swizzle_w(port)
-+#define __swizzle_addr_l(port) (port)
-+#define __swizzle_addr_q(port) (port)
-+
-+# define ioswabb(a, x) (x)
-+# define __mem_ioswabb(a, x) (x)
-+# define ioswabw(a, x) (x)
-+# define __mem_ioswabw(a, x) cpu_to_le16(x)
-+# define ioswabl(a, x) (x)
-+# define __mem_ioswabl(a, x) cpu_to_le32(x)
-+# define ioswabq(a, x) (x)
-+# define __mem_ioswabq(a, x) cpu_to_le64(x)
-+
-+#endif /* __ASM_MACH_ATH79_MANGLE_PORT_H */
---- a/arch/mips/pci/pci-ar71xx.c
-+++ b/arch/mips/pci/pci-ar71xx.c
-@@ -71,6 +71,45 @@ static const u32 ar71xx_pci_read_mask[8]
- 0, 0xff, 0xffff, 0, 0xffffffff, 0, 0, 0
- };
-
-+static unsigned long (*__ath79_pci_swizzle_b)(unsigned long port);
-+static unsigned long (*__ath79_pci_swizzle_w)(unsigned long port);
-+
-+static inline bool ar71xx_is_pci_addr(unsigned long port)
-+{
-+ unsigned long phys = CPHYSADDR(port);
-+
-+ return (phys >= AR71XX_PCI_MEM_BASE &&
-+ phys < AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE);
-+}
-+
-+static unsigned long ar71xx_pci_swizzle_b(unsigned long port)
-+{
-+ return ar71xx_is_pci_addr(port) ? port ^ 3 : port;
-+}
-+
-+static unsigned long ar71xx_pci_swizzle_w(unsigned long port)
-+{
-+ return ar71xx_is_pci_addr(port) ? port ^ 2 : port;
-+}
-+
-+unsigned long ath79_pci_swizzle_b(unsigned long port)
-+{
-+ if (__ath79_pci_swizzle_b)
-+ return __ath79_pci_swizzle_b(port);
-+
-+ return port;
-+}
-+EXPORT_SYMBOL(ath79_pci_swizzle_b);
-+
-+unsigned long ath79_pci_swizzle_w(unsigned long port)
-+{
-+ if (__ath79_pci_swizzle_w)
-+ return __ath79_pci_swizzle_w(port);
-+
-+ return port;
-+}
-+EXPORT_SYMBOL(ath79_pci_swizzle_w);
-+
- static inline u32 ar71xx_pci_get_ble(int where, int size, int local)
- {
- u32 t;
-@@ -279,6 +318,9 @@ static int ar71xx_pci_probe(struct platf
-
- register_pci_controller(&apc->pci_ctrl);
-
-+ __ath79_pci_swizzle_b = ar71xx_pci_swizzle_b;
-+ __ath79_pci_swizzle_w = ar71xx_pci_swizzle_w;
-+
- return 0;
- }
-
+++ /dev/null
-From 71dd6c0dff51b5f1fef2e9dfa6f6a948aac975f3 Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Wed, 17 Apr 2019 23:59:21 +0200
-Subject: [PATCH] net: phy: add support for reset-controller
-
-This commit adds support for PHY reset pins handled by a reset controller.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/mdio_bus.c | 27 +++++++++++++++++++++++++--
- drivers/net/phy/mdio_device.c | 13 +++++++++++--
- include/linux/mdio.h | 1 +
- 3 files changed, 37 insertions(+), 4 deletions(-)
-
---- a/drivers/net/phy/mdio_bus.c
-+++ b/drivers/net/phy/mdio_bus.c
-@@ -29,6 +29,7 @@
- #include <linux/of_gpio.h>
- #include <linux/netdevice.h>
- #include <linux/etherdevice.h>
-+#include <linux/reset.h>
- #include <linux/skbuff.h>
- #include <linux/spinlock.h>
- #include <linux/mm.h>
-@@ -65,8 +66,23 @@ static int mdiobus_register_gpiod(struct
-
- mdiodev->reset = gpiod;
-
-- /* Assert the reset signal again */
-- mdio_device_reset(mdiodev, 1);
-+ return 0;
-+}
-+
-+static int mdiobus_register_reset(struct mdio_device *mdiodev)
-+{
-+ struct reset_control *reset = NULL;
-+
-+ if (mdiodev->dev.of_node)
-+ reset = devm_reset_control_get_exclusive(&mdiodev->dev,
-+ "phy");
-+ if (PTR_ERR(reset) == -ENOENT ||
-+ PTR_ERR(reset) == -ENOTSUPP)
-+ reset = NULL;
-+ else if (IS_ERR(reset))
-+ return PTR_ERR(reset);
-+
-+ mdiodev->reset_ctrl = reset;
-
- return 0;
- }
-@@ -82,6 +98,13 @@ int mdiobus_register_device(struct mdio_
- err = mdiobus_register_gpiod(mdiodev);
- if (err)
- return err;
-+
-+ err = mdiobus_register_reset(mdiodev);
-+ if (err)
-+ return err;
-+
-+ /* Assert the reset signal */
-+ mdio_device_reset(mdiodev, 1);
- }
-
- mdiodev->bus->mdio_map[mdiodev->addr] = mdiodev;
---- a/drivers/net/phy/mdio_device.c
-+++ b/drivers/net/phy/mdio_device.c
-@@ -21,6 +21,7 @@
- #include <linux/mii.h>
- #include <linux/module.h>
- #include <linux/phy.h>
-+#include <linux/reset.h>
- #include <linux/slab.h>
- #include <linux/string.h>
- #include <linux/unistd.h>
-@@ -121,10 +122,18 @@ void mdio_device_reset(struct mdio_devic
- {
- unsigned int d;
-
-- if (!mdiodev->reset)
-+ if (!mdiodev->reset && !mdiodev->reset_ctrl)
- return;
-
-- gpiod_set_value(mdiodev->reset, value);
-+ if (mdiodev->reset)
-+ gpiod_set_value(mdiodev->reset, value);
-+
-+ if (mdiodev->reset_ctrl) {
-+ if (value)
-+ reset_control_assert(mdiodev->reset_ctrl);
-+ else
-+ reset_control_deassert(mdiodev->reset_ctrl);
-+ }
-
- d = value ? mdiodev->reset_assert_delay : mdiodev->reset_deassert_delay;
- if (d)
---- a/include/linux/mdio.h
-+++ b/include/linux/mdio.h
-@@ -40,6 +40,7 @@ struct mdio_device {
- int addr;
- int flags;
- struct gpio_desc *reset;
-+ struct reset_control *reset_ctrl;
- unsigned int reset_assert_delay;
- unsigned int reset_deassert_delay;
- };
+++ /dev/null
-From 32085f25d7b68404055f3525c780142fc72e543f Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Fri, 22 Nov 2019 22:44:51 +0100
-Subject: [PATCH] mdio_bus: don't use managed reset-controller
-
-Geert Uytterhoeven reported that using devm_reset_controller_get leads
-to a WARNING when probing a reset-controlled PHY. This is because the
-device devm_reset_controller_get gets supplied is not actually the
-one being probed.
-
-Acquire an unmanaged reset-control as well as free the reset_control on
-unregister to fix this.
-
-Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
-CC: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David Bauer <mail@david-bauer.net>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/mdio_bus.c | 6 ++++--
- 1 file changed, 4 insertions(+), 2 deletions(-)
-
---- a/drivers/net/phy/mdio_bus.c
-+++ b/drivers/net/phy/mdio_bus.c
-@@ -74,8 +74,8 @@ static int mdiobus_register_reset(struct
- struct reset_control *reset = NULL;
-
- if (mdiodev->dev.of_node)
-- reset = devm_reset_control_get_exclusive(&mdiodev->dev,
-- "phy");
-+ reset = of_reset_control_get_exclusive(mdiodev->dev.of_node,
-+ "phy");
- if (PTR_ERR(reset) == -ENOENT ||
- PTR_ERR(reset) == -ENOTSUPP)
- reset = NULL;
-@@ -118,6 +118,8 @@ int mdiobus_unregister_device(struct mdi
- if (mdiodev->bus->mdio_map[mdiodev->addr] != mdiodev)
- return -EINVAL;
-
-+ reset_control_put(mdiodev->reset_ctrl);
-+
- mdiodev->bus->mdio_map[mdiodev->addr] = NULL;
-
- return 0;
+++ /dev/null
---- a/drivers/net/phy/mdio-bitbang.c
-+++ b/drivers/net/phy/mdio-bitbang.c
-@@ -155,7 +155,7 @@ static int mdiobb_cmd_addr(struct mdiobb
- static int mdiobb_read(struct mii_bus *bus, int phy, int reg)
- {
- struct mdiobb_ctrl *ctrl = bus->priv;
-- int ret, i;
-+ int ret;
-
- if (reg & MII_ADDR_C45) {
- reg = mdiobb_cmd_addr(ctrl, phy, reg);
-@@ -165,19 +165,7 @@ static int mdiobb_read(struct mii_bus *b
-
- ctrl->ops->set_mdio_dir(ctrl, 0);
-
-- /* check the turnaround bit: the PHY should be driving it to zero, if this
-- * PHY is listed in phy_ignore_ta_mask as having broken TA, skip that
-- */
-- if (mdiobb_get_bit(ctrl) != 0 &&
-- !(bus->phy_ignore_ta_mask & (1 << phy))) {
-- /* PHY didn't drive TA low -- flush any bits it
-- * may be trying to send.
-- */
-- for (i = 0; i < 32; i++)
-- mdiobb_get_bit(ctrl);
--
-- return 0xffff;
-- }
-+ mdiobb_get_bit(ctrl);
-
- ret = mdiobb_get_num(ctrl, 16);
- mdiobb_get_bit(ctrl);
+++ /dev/null
-From 66e584435ac0de6e0abeb6d7166fe4fe25d6bb73 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 16 Jun 2015 13:15:08 +0200
-Subject: [PATCH] phy/mdio-bitbang: prevent rescheduling during command
-
-It seems some phys have some maximum timings for accessing the MDIO line,
-resulting in bit errors under cpu stress. Prevent this from happening by
-disabling interrupts when sending commands.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/net/phy/mdio-bitbang.c | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/drivers/net/phy/mdio-bitbang.c
-+++ b/drivers/net/phy/mdio-bitbang.c
-@@ -17,6 +17,7 @@
- * kind, whether express or implied.
- */
-
-+#include <linux/irqflags.h>
- #include <linux/module.h>
- #include <linux/mdio-bitbang.h>
- #include <linux/types.h>
-@@ -156,7 +157,9 @@ static int mdiobb_read(struct mii_bus *b
- {
- struct mdiobb_ctrl *ctrl = bus->priv;
- int ret;
-+ unsigned long flags;
-
-+ local_irq_save(flags);
- if (reg & MII_ADDR_C45) {
- reg = mdiobb_cmd_addr(ctrl, phy, reg);
- mdiobb_cmd(ctrl, MDIO_C45_READ, phy, reg);
-@@ -169,13 +172,17 @@ static int mdiobb_read(struct mii_bus *b
-
- ret = mdiobb_get_num(ctrl, 16);
- mdiobb_get_bit(ctrl);
-+ local_irq_restore(flags);
-+
- return ret;
- }
-
- static int mdiobb_write(struct mii_bus *bus, int phy, int reg, u16 val)
- {
- struct mdiobb_ctrl *ctrl = bus->priv;
-+ unsigned long flags;
-
-+ local_irq_save(flags);
- if (reg & MII_ADDR_C45) {
- reg = mdiobb_cmd_addr(ctrl, phy, reg);
- mdiobb_cmd(ctrl, MDIO_C45_WRITE, phy, reg);
-@@ -190,6 +197,8 @@ static int mdiobb_write(struct mii_bus *
-
- ctrl->ops->set_mdio_dir(ctrl, 0);
- mdiobb_get_bit(ctrl);
-+ local_irq_restore(flags);
-+
- return 0;
- }
-
+++ /dev/null
---- a/arch/mips/include/asm/checksum.h
-+++ b/arch/mips/include/asm/checksum.h
-@@ -134,26 +134,30 @@ static inline __sum16 ip_fast_csum(const
- const unsigned int *stop = word + ihl;
- unsigned int csum;
- int carry;
-+ unsigned int w;
-
-- csum = word[0];
-- csum += word[1];
-- carry = (csum < word[1]);
-+ csum = net_hdr_word(word++);
-+
-+ w = net_hdr_word(word++);
-+ csum += w;
-+ carry = (csum < w);
- csum += carry;
-
-- csum += word[2];
-- carry = (csum < word[2]);
-+ w = net_hdr_word(word++);
-+ csum += w;
-+ carry = (csum < w);
- csum += carry;
-
-- csum += word[3];
-- carry = (csum < word[3]);
-+ w = net_hdr_word(word++);
-+ csum += w;
-+ carry = (csum < w);
- csum += carry;
-
-- word += 4;
- do {
-- csum += *word;
-- carry = (csum < *word);
-+ w = net_hdr_word(word++);
-+ csum += w;
-+ carry = (csum < w);
- csum += carry;
-- word++;
- } while (word != stop);
-
- return csum_fold(csum);
-@@ -214,73 +218,6 @@ static inline __sum16 ip_compute_csum(co
- return csum_fold(csum_partial(buff, len, 0));
- }
-
--#define _HAVE_ARCH_IPV6_CSUM
--static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
-- const struct in6_addr *daddr,
-- __u32 len, __u8 proto,
-- __wsum sum)
--{
-- __wsum tmp;
--
-- __asm__(
-- " .set push # csum_ipv6_magic\n"
-- " .set noreorder \n"
-- " .set noat \n"
-- " addu %0, %5 # proto (long in network byte order)\n"
-- " sltu $1, %0, %5 \n"
-- " addu %0, $1 \n"
--
-- " addu %0, %6 # csum\n"
-- " sltu $1, %0, %6 \n"
-- " lw %1, 0(%2) # four words source address\n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " lw %1, 4(%2) \n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " lw %1, 8(%2) \n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " lw %1, 12(%2) \n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " lw %1, 0(%3) \n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " lw %1, 4(%3) \n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " lw %1, 8(%3) \n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " lw %1, 12(%3) \n"
-- " addu %0, $1 \n"
-- " addu %0, %1 \n"
-- " sltu $1, %0, %1 \n"
--
-- " addu %0, $1 # Add final carry\n"
-- " .set pop"
-- : "=&r" (sum), "=&r" (tmp)
-- : "r" (saddr), "r" (daddr),
-- "0" (htonl(len)), "r" (htonl(proto)), "r" (sum));
--
-- return csum_fold(sum);
--}
--
- #include <asm-generic/checksum.h>
- #endif /* CONFIG_GENERIC_CSUM */
-
---- a/include/uapi/linux/ip.h
-+++ b/include/uapi/linux/ip.h
-@@ -103,7 +103,7 @@ struct iphdr {
- __be32 saddr;
- __be32 daddr;
- /*The options start here. */
--};
-+} __attribute__((packed, aligned(2)));
-
-
- struct ip_auth_hdr {
---- a/include/uapi/linux/ipv6.h
-+++ b/include/uapi/linux/ipv6.h
-@@ -131,7 +131,7 @@ struct ipv6hdr {
-
- struct in6_addr saddr;
- struct in6_addr daddr;
--};
-+} __attribute__((packed, aligned(2)));
-
-
- /* index values for the variables in ipv6_devconf */
---- a/include/uapi/linux/tcp.h
-+++ b/include/uapi/linux/tcp.h
-@@ -55,7 +55,7 @@ struct tcphdr {
- __be16 window;
- __sum16 check;
- __be16 urg_ptr;
--};
-+} __attribute__((packed, aligned(2)));
-
- /*
- * The union cast uses a gcc extension to avoid aliasing problems
-@@ -65,7 +65,7 @@ struct tcphdr {
- union tcp_word_hdr {
- struct tcphdr hdr;
- __be32 words[5];
--};
-+} __attribute__((packed, aligned(2)));
-
- #define tcp_flag_word(tp) ( ((union tcp_word_hdr *)(tp))->words [3])
-
---- a/include/uapi/linux/udp.h
-+++ b/include/uapi/linux/udp.h
-@@ -25,7 +25,7 @@ struct udphdr {
- __be16 dest;
- __be16 len;
- __sum16 check;
--};
-+} __attribute__((packed, aligned(2)));
-
- /* UDP socket options */
- #define UDP_CORK 1 /* Never send partially complete segments */
---- a/net/netfilter/nf_conntrack_core.c
-+++ b/net/netfilter/nf_conntrack_core.c
-@@ -263,8 +263,8 @@ nf_ct_get_tuple(const struct sk_buff *sk
-
- switch (l3num) {
- case NFPROTO_IPV4:
-- tuple->src.u3.ip = ap[0];
-- tuple->dst.u3.ip = ap[1];
-+ tuple->src.u3.ip = net_hdr_word(ap++);
-+ tuple->dst.u3.ip = net_hdr_word(ap);
- break;
- case NFPROTO_IPV6:
- memcpy(tuple->src.u3.ip6, ap, sizeof(tuple->src.u3.ip6));
---- a/include/uapi/linux/icmp.h
-+++ b/include/uapi/linux/icmp.h
-@@ -82,7 +82,7 @@ struct icmphdr {
- } frag;
- __u8 reserved[4];
- } un;
--};
-+} __attribute__((packed, aligned(2)));
-
-
- /*
---- a/include/uapi/linux/in6.h
-+++ b/include/uapi/linux/in6.h
-@@ -43,7 +43,7 @@ struct in6_addr {
- #define s6_addr16 in6_u.u6_addr16
- #define s6_addr32 in6_u.u6_addr32
- #endif
--};
-+} __attribute__((packed, aligned(2)));
- #endif /* __UAPI_DEF_IN6_ADDR */
-
- #if __UAPI_DEF_SOCKADDR_IN6
---- a/net/ipv6/tcp_ipv6.c
-+++ b/net/ipv6/tcp_ipv6.c
-@@ -39,6 +39,7 @@
- #include <linux/ipsec.h>
- #include <linux/times.h>
- #include <linux/slab.h>
-+#include <asm/unaligned.h>
- #include <linux/uaccess.h>
- #include <linux/ipv6.h>
- #include <linux/icmpv6.h>
-@@ -836,10 +837,10 @@ static void tcp_v6_send_response(const s
- topt = (__be32 *)(t1 + 1);
-
- if (tsecr) {
-- *topt++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
-- (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP);
-- *topt++ = htonl(tsval);
-- *topt++ = htonl(tsecr);
-+ put_unaligned_be32((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
-+ (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP, topt++);
-+ put_unaligned_be32(tsval, topt++);
-+ put_unaligned_be32(tsecr, topt++);
- }
-
- #ifdef CONFIG_TCP_MD5SIG
---- a/include/linux/ipv6.h
-+++ b/include/linux/ipv6.h
-@@ -6,6 +6,7 @@
-
- #define ipv6_optlen(p) (((p)->hdrlen+1) << 3)
- #define ipv6_authlen(p) (((p)->hdrlen+2) << 2)
-+
- /*
- * This structure contains configuration options per IPv6 link.
- */
---- a/net/ipv6/datagram.c
-+++ b/net/ipv6/datagram.c
-@@ -480,7 +480,7 @@ int ipv6_recv_error(struct sock *sk, str
- ipv6_iface_scope_id(&sin->sin6_addr,
- IP6CB(skb)->iif);
- } else {
-- ipv6_addr_set_v4mapped(*(__be32 *)(nh + serr->addr_offset),
-+ ipv6_addr_set_v4mapped(net_hdr_word(nh + serr->addr_offset),
- &sin->sin6_addr);
- sin->sin6_scope_id = 0;
- }
-@@ -830,12 +830,12 @@ int ip6_datagram_send_ctl(struct net *ne
- }
-
- if (fl6->flowlabel&IPV6_FLOWINFO_MASK) {
-- if ((fl6->flowlabel^*(__be32 *)CMSG_DATA(cmsg))&~IPV6_FLOWINFO_MASK) {
-+ if ((fl6->flowlabel^net_hdr_word(CMSG_DATA(cmsg)))&~IPV6_FLOWINFO_MASK) {
- err = -EINVAL;
- goto exit_f;
- }
- }
-- fl6->flowlabel = IPV6_FLOWINFO_MASK & *(__be32 *)CMSG_DATA(cmsg);
-+ fl6->flowlabel = IPV6_FLOWINFO_MASK & net_hdr_word(CMSG_DATA(cmsg));
- break;
-
- case IPV6_2292HOPOPTS:
---- a/net/ipv6/ip6_gre.c
-+++ b/net/ipv6/ip6_gre.c
-@@ -455,7 +455,7 @@ static void ip6gre_err(struct sk_buff *s
- return;
- ipv6h = (const struct ipv6hdr *)skb->data;
- greh = (const struct gre_base_hdr *)(skb->data + offset);
-- key = key_off ? *(__be32 *)(skb->data + key_off) : 0;
-+ key = key_off ? net_hdr_word((__be32 *)(skb->data + key_off)) : 0;
-
- t = ip6gre_tunnel_lookup(skb->dev, &ipv6h->daddr, &ipv6h->saddr,
- key, greh->protocol);
---- a/net/ipv6/exthdrs.c
-+++ b/net/ipv6/exthdrs.c
-@@ -756,7 +756,7 @@ static bool ipv6_hop_jumbo(struct sk_buf
- goto drop;
- }
-
-- pkt_len = ntohl(*(__be32 *)(nh + optoff + 2));
-+ pkt_len = ntohl(net_hdr_word(nh + optoff + 2));
- if (pkt_len <= IPV6_MAXPLEN) {
- __IP6_INC_STATS(net, idev, IPSTATS_MIB_INHDRERRORS);
- icmpv6_param_prob(skb, ICMPV6_HDR_FIELD, optoff+2);
---- a/include/linux/types.h
-+++ b/include/linux/types.h
-@@ -230,5 +230,11 @@ struct callback_head {
- typedef void (*rcu_callback_t)(struct rcu_head *head);
- typedef void (*call_rcu_func_t)(struct rcu_head *head, rcu_callback_t func);
-
-+struct net_hdr_word {
-+ u32 words[1];
-+} __attribute__((packed, aligned(2)));
-+
-+#define net_hdr_word(_p) (((struct net_hdr_word *) (_p))->words[0])
-+
- #endif /* __ASSEMBLY__ */
- #endif /* _LINUX_TYPES_H */
---- a/net/ipv4/af_inet.c
-+++ b/net/ipv4/af_inet.c
-@@ -1422,8 +1422,8 @@ struct sk_buff *inet_gro_receive(struct
- if (unlikely(ip_fast_csum((u8 *)iph, 5)))
- goto out_unlock;
-
-- id = ntohl(*(__be32 *)&iph->id);
-- flush = (u16)((ntohl(*(__be32 *)iph) ^ skb_gro_len(skb)) | (id & ~IP_DF));
-+ id = ntohl(net_hdr_word(&iph->id));
-+ flush = (u16)((ntohl(net_hdr_word(iph)) ^ skb_gro_len(skb)) | (id & ~IP_DF));
- id >>= 16;
-
- list_for_each_entry(p, head, list) {
---- a/net/ipv4/route.c
-+++ b/net/ipv4/route.c
-@@ -449,7 +449,7 @@ static struct neighbour *ipv4_neigh_look
- else if (skb)
- pkey = &ip_hdr(skb)->daddr;
-
-- n = __ipv4_neigh_lookup(dev, *(__force u32 *)pkey);
-+ n = __ipv4_neigh_lookup(dev, net_hdr_word(pkey));
- if (n)
- return n;
- return neigh_create(&arp_tbl, pkey, dev);
---- a/net/ipv4/tcp_output.c
-+++ b/net/ipv4/tcp_output.c
-@@ -447,48 +447,53 @@ static void tcp_options_write(__be32 *pt
- u16 options = opts->options; /* mungable copy */
-
- if (unlikely(OPTION_MD5 & options)) {
-- *ptr++ = htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
-- (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG);
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
-+ (TCPOPT_MD5SIG << 8) | TCPOLEN_MD5SIG);
- /* overload cookie hash location */
- opts->hash_location = (__u8 *)ptr;
- ptr += 4;
- }
-
- if (unlikely(opts->mss)) {
-- *ptr++ = htonl((TCPOPT_MSS << 24) |
-- (TCPOLEN_MSS << 16) |
-- opts->mss);
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_MSS << 24) | (TCPOLEN_MSS << 16) |
-+ opts->mss);
- }
-
- if (likely(OPTION_TS & options)) {
- if (unlikely(OPTION_SACK_ADVERTISE & options)) {
-- *ptr++ = htonl((TCPOPT_SACK_PERM << 24) |
-- (TCPOLEN_SACK_PERM << 16) |
-- (TCPOPT_TIMESTAMP << 8) |
-- TCPOLEN_TIMESTAMP);
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_SACK_PERM << 24) |
-+ (TCPOLEN_SACK_PERM << 16) |
-+ (TCPOPT_TIMESTAMP << 8) |
-+ TCPOLEN_TIMESTAMP);
- options &= ~OPTION_SACK_ADVERTISE;
- } else {
-- *ptr++ = htonl((TCPOPT_NOP << 24) |
-- (TCPOPT_NOP << 16) |
-- (TCPOPT_TIMESTAMP << 8) |
-- TCPOLEN_TIMESTAMP);
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_NOP << 24) |
-+ (TCPOPT_NOP << 16) |
-+ (TCPOPT_TIMESTAMP << 8) |
-+ TCPOLEN_TIMESTAMP);
- }
-- *ptr++ = htonl(opts->tsval);
-- *ptr++ = htonl(opts->tsecr);
-+ net_hdr_word(ptr++) = htonl(opts->tsval);
-+ net_hdr_word(ptr++) = htonl(opts->tsecr);
- }
-
- if (unlikely(OPTION_SACK_ADVERTISE & options)) {
-- *ptr++ = htonl((TCPOPT_NOP << 24) |
-- (TCPOPT_NOP << 16) |
-- (TCPOPT_SACK_PERM << 8) |
-- TCPOLEN_SACK_PERM);
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_NOP << 24) |
-+ (TCPOPT_NOP << 16) |
-+ (TCPOPT_SACK_PERM << 8) |
-+ TCPOLEN_SACK_PERM);
- }
-
- if (unlikely(OPTION_WSCALE & options)) {
-- *ptr++ = htonl((TCPOPT_NOP << 24) |
-- (TCPOPT_WINDOW << 16) |
-- (TCPOLEN_WINDOW << 8) |
-- opts->ws);
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_NOP << 24) |
-+ (TCPOPT_WINDOW << 16) |
-+ (TCPOLEN_WINDOW << 8) |
-+ opts->ws);
- }
-
- if (unlikely(opts->num_sack_blocks)) {
-@@ -496,16 +501,17 @@ static void tcp_options_write(__be32 *pt
- tp->duplicate_sack : tp->selective_acks;
- int this_sack;
-
-- *ptr++ = htonl((TCPOPT_NOP << 24) |
-- (TCPOPT_NOP << 16) |
-- (TCPOPT_SACK << 8) |
-- (TCPOLEN_SACK_BASE + (opts->num_sack_blocks *
-+ net_hdr_word(ptr++) =
-+ htonl((TCPOPT_NOP << 24) |
-+ (TCPOPT_NOP << 16) |
-+ (TCPOPT_SACK << 8) |
-+ (TCPOLEN_SACK_BASE + (opts->num_sack_blocks *
- TCPOLEN_SACK_PERBLOCK)));
-
- for (this_sack = 0; this_sack < opts->num_sack_blocks;
- ++this_sack) {
-- *ptr++ = htonl(sp[this_sack].start_seq);
-- *ptr++ = htonl(sp[this_sack].end_seq);
-+ net_hdr_word(ptr++) = htonl(sp[this_sack].start_seq);
-+ net_hdr_word(ptr++) = htonl(sp[this_sack].end_seq);
- }
-
- tp->rx_opt.dsack = 0;
-@@ -518,13 +524,14 @@ static void tcp_options_write(__be32 *pt
-
- if (foc->exp) {
- len = TCPOLEN_EXP_FASTOPEN_BASE + foc->len;
-- *ptr = htonl((TCPOPT_EXP << 24) | (len << 16) |
-+ net_hdr_word(ptr) =
-+ htonl((TCPOPT_EXP << 24) | (len << 16) |
- TCPOPT_FASTOPEN_MAGIC);
- p += TCPOLEN_EXP_FASTOPEN_BASE;
- } else {
- len = TCPOLEN_FASTOPEN_BASE + foc->len;
-- *p++ = TCPOPT_FASTOPEN;
-- *p++ = len;
-+ net_hdr_word(p++) = TCPOPT_FASTOPEN;
-+ net_hdr_word(p++) = len;
- }
-
- memcpy(p, foc->val, foc->len);
---- a/include/uapi/linux/igmp.h
-+++ b/include/uapi/linux/igmp.h
-@@ -33,7 +33,7 @@ struct igmphdr {
- __u8 code; /* For newer IGMP */
- __sum16 csum;
- __be32 group;
--};
-+} __attribute__((packed, aligned(2)));
-
- /* V3 group record types [grec_type] */
- #define IGMPV3_MODE_IS_INCLUDE 1
-@@ -49,7 +49,7 @@ struct igmpv3_grec {
- __be16 grec_nsrcs;
- __be32 grec_mca;
- __be32 grec_src[0];
--};
-+} __attribute__((packed, aligned(2)));
-
- struct igmpv3_report {
- __u8 type;
-@@ -58,7 +58,7 @@ struct igmpv3_report {
- __be16 resv2;
- __be16 ngrec;
- struct igmpv3_grec grec[0];
--};
-+} __attribute__((packed, aligned(2)));
-
- struct igmpv3_query {
- __u8 type;
-@@ -79,7 +79,7 @@ struct igmpv3_query {
- __u8 qqic;
- __be16 nsrcs;
- __be32 srcs[0];
--};
-+} __attribute__((packed, aligned(2)));
-
- #define IGMP_HOST_MEMBERSHIP_QUERY 0x11 /* From RFC1112 */
- #define IGMP_HOST_MEMBERSHIP_REPORT 0x12 /* Ditto */
---- a/net/core/flow_dissector.c
-+++ b/net/core/flow_dissector.c
-@@ -111,7 +111,7 @@ __be32 __skb_flow_get_ports(const struct
- ports = __skb_header_pointer(skb, thoff + poff,
- sizeof(_ports), data, hlen, &_ports);
- if (ports)
-- return *ports;
-+ return (__be32)net_hdr_word(ports);
- }
-
- return 0;
---- a/include/uapi/linux/icmpv6.h
-+++ b/include/uapi/linux/icmpv6.h
-@@ -77,7 +77,7 @@ struct icmp6hdr {
- #define icmp6_addrconf_other icmp6_dataun.u_nd_ra.other
- #define icmp6_rt_lifetime icmp6_dataun.u_nd_ra.rt_lifetime
- #define icmp6_router_pref icmp6_dataun.u_nd_ra.router_pref
--};
-+} __attribute__((packed, aligned(2)));
-
-
- #define ICMPV6_ROUTER_PREF_LOW 0x3
---- a/include/net/ndisc.h
-+++ b/include/net/ndisc.h
-@@ -89,7 +89,7 @@ struct ra_msg {
- struct icmp6hdr icmph;
- __be32 reachable_time;
- __be32 retrans_timer;
--};
-+} __attribute__((packed, aligned(2)));
-
- struct rd_msg {
- struct icmp6hdr icmph;
-@@ -368,10 +368,10 @@ static inline u32 ndisc_hashfn(const voi
- {
- const u32 *p32 = pkey;
-
-- return (((p32[0] ^ hash32_ptr(dev)) * hash_rnd[0]) +
-- (p32[1] * hash_rnd[1]) +
-- (p32[2] * hash_rnd[2]) +
-- (p32[3] * hash_rnd[3]));
-+ return (((net_hdr_word(&p32[0]) ^ hash32_ptr(dev)) * hash_rnd[0]) +
-+ (net_hdr_word(&p32[1]) * hash_rnd[1]) +
-+ (net_hdr_word(&p32[2]) * hash_rnd[2]) +
-+ (net_hdr_word(&p32[3]) * hash_rnd[3]));
- }
-
- static inline struct neighbour *__ipv6_neigh_lookup_noref(struct net_device *dev, const void *pkey)
---- a/net/sched/cls_u32.c
-+++ b/net/sched/cls_u32.c
-@@ -165,7 +165,7 @@ next_knode:
- data = skb_header_pointer(skb, toff, 4, &hdata);
- if (!data)
- goto out;
-- if ((*data ^ key->val) & key->mask) {
-+ if ((net_hdr_word(data) ^ key->val) & key->mask) {
- n = rcu_dereference_bh(n->next);
- goto next_knode;
- }
-@@ -218,8 +218,8 @@ check_terminal:
- &hdata);
- if (!data)
- goto out;
-- sel = ht->divisor & u32_hash_fold(*data, &n->sel,
-- n->fshift);
-+ sel = ht->divisor & u32_hash_fold(net_hdr_word(data),
-+ &n->sel, n->fshift);
- }
- if (!(n->sel.flags & (TC_U32_VAROFFSET | TC_U32_OFFSET | TC_U32_EAT)))
- goto next_ht;
---- a/net/ipv6/ip6_offload.c
-+++ b/net/ipv6/ip6_offload.c
-@@ -223,7 +223,7 @@ static struct sk_buff *ipv6_gro_receive(
- continue;
-
- iph2 = (struct ipv6hdr *)(p->data + off);
-- first_word = *(__be32 *)iph ^ *(__be32 *)iph2;
-+ first_word = net_hdr_word(iph) ^ net_hdr_word(iph2);
-
- /* All fields must match except length and Traffic Class.
- * XXX skbs on the gro_list have all been parsed and pulled
---- a/include/net/addrconf.h
-+++ b/include/net/addrconf.h
-@@ -47,7 +47,7 @@ struct prefix_info {
- __be32 reserved2;
-
- struct in6_addr prefix;
--};
-+} __attribute__((packed, aligned(2)));
-
- #include <linux/netdevice.h>
- #include <net/if_inet6.h>
---- a/include/net/inet_ecn.h
-+++ b/include/net/inet_ecn.h
-@@ -126,9 +126,9 @@ static inline int IP6_ECN_set_ce(struct
- if (INET_ECN_is_not_ect(ipv6_get_dsfield(iph)))
- return 0;
-
-- from = *(__be32 *)iph;
-+ from = net_hdr_word(iph);
- to = from | htonl(INET_ECN_CE << 20);
-- *(__be32 *)iph = to;
-+ net_hdr_word(iph) = to;
- if (skb->ip_summed == CHECKSUM_COMPLETE)
- skb->csum = csum_add(csum_sub(skb->csum, (__force __wsum)from),
- (__force __wsum)to);
---- a/include/net/ipv6.h
-+++ b/include/net/ipv6.h
-@@ -149,7 +149,7 @@ struct frag_hdr {
- __u8 reserved;
- __be16 frag_off;
- __be32 identification;
--};
-+} __attribute__((packed, aligned(2)));
-
- #define IP6_MF 0x0001
- #define IP6_OFFSET 0xFFF8
-@@ -499,8 +499,8 @@ static inline void __ipv6_addr_set_half(
- }
- #endif
- #endif
-- addr[0] = wh;
-- addr[1] = wl;
-+ net_hdr_word(&addr[0]) = wh;
-+ net_hdr_word(&addr[1]) = wl;
- }
-
- static inline void ipv6_addr_set(struct in6_addr *addr,
-@@ -559,6 +559,8 @@ static inline bool ipv6_prefix_equal(con
- const __be32 *a1 = addr1->s6_addr32;
- const __be32 *a2 = addr2->s6_addr32;
- unsigned int pdw, pbi;
-+ /* Used for last <32-bit fraction of prefix */
-+ u32 pbia1, pbia2;
-
- /* check complete u32 in prefix */
- pdw = prefixlen >> 5;
-@@ -567,7 +569,9 @@ static inline bool ipv6_prefix_equal(con
-
- /* check incomplete u32 in prefix */
- pbi = prefixlen & 0x1f;
-- if (pbi && ((a1[pdw] ^ a2[pdw]) & htonl((0xffffffff) << (32 - pbi))))
-+ pbia1 = net_hdr_word(&a1[pdw]);
-+ pbia2 = net_hdr_word(&a2[pdw]);
-+ if (pbi && ((pbia1 ^ pbia2) & htonl((0xffffffff) << (32 - pbi))))
- return false;
-
- return true;
-@@ -683,13 +687,13 @@ static inline void ipv6_addr_set_v4mappe
- */
- static inline int __ipv6_addr_diff32(const void *token1, const void *token2, int addrlen)
- {
-- const __be32 *a1 = token1, *a2 = token2;
-+ const struct in6_addr *a1 = token1, *a2 = token2;
- int i;
-
- addrlen >>= 2;
-
- for (i = 0; i < addrlen; i++) {
-- __be32 xb = a1[i] ^ a2[i];
-+ __be32 xb = a1->s6_addr32[i] ^ a2->s6_addr32[i];
- if (xb)
- return i * 32 + 31 - __fls(ntohl(xb));
- }
-@@ -876,17 +880,18 @@ static inline int ip6_multipath_hash_pol
- static inline void ip6_flow_hdr(struct ipv6hdr *hdr, unsigned int tclass,
- __be32 flowlabel)
- {
-- *(__be32 *)hdr = htonl(0x60000000 | (tclass << 20)) | flowlabel;
-+ net_hdr_word((__be32 *)hdr) =
-+ htonl(0x60000000 | (tclass << 20)) | flowlabel;
- }
-
- static inline __be32 ip6_flowinfo(const struct ipv6hdr *hdr)
- {
-- return *(__be32 *)hdr & IPV6_FLOWINFO_MASK;
-+ return net_hdr_word((__be32 *)hdr) & IPV6_FLOWINFO_MASK;
- }
-
- static inline __be32 ip6_flowlabel(const struct ipv6hdr *hdr)
- {
-- return *(__be32 *)hdr & IPV6_FLOWLABEL_MASK;
-+ return net_hdr_word((__be32 *)hdr) & IPV6_FLOWLABEL_MASK;
- }
-
- static inline u8 ip6_tclass(__be32 flowinfo)
---- a/include/net/secure_seq.h
-+++ b/include/net/secure_seq.h
-@@ -3,6 +3,7 @@
- #define _NET_SECURE_SEQ
-
- #include <linux/types.h>
-+#include <linux/in6.h>
-
- u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport);
- u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr,
---- a/include/uapi/linux/in.h
-+++ b/include/uapi/linux/in.h
-@@ -84,7 +84,7 @@ enum {
- /* Internet address. */
- struct in_addr {
- __be32 s_addr;
--};
-+} __attribute__((packed, aligned(2)));
- #endif
-
- #define IP_TOS 1
---- a/net/ipv6/ip6_fib.c
-+++ b/net/ipv6/ip6_fib.c
-@@ -142,7 +142,7 @@ static __be32 addr_bit_set(const void *t
- * See include/asm-generic/bitops/le.h.
- */
- return (__force __be32)(1 << ((~fn_bit ^ BITOP_BE32_SWIZZLE) & 0x1f)) &
-- addr[fn_bit >> 5];
-+ net_hdr_word(&addr[fn_bit >> 5]);
- }
-
- struct fib6_info *fib6_info_alloc(gfp_t gfp_flags)
---- a/net/netfilter/nf_conntrack_proto_tcp.c
-+++ b/net/netfilter/nf_conntrack_proto_tcp.c
-@@ -423,7 +423,7 @@ static void tcp_sack(const struct sk_buf
-
- /* Fast path for timestamp-only option */
- if (length == TCPOLEN_TSTAMP_ALIGNED
-- && *(__be32 *)ptr == htonl((TCPOPT_NOP << 24)
-+ && net_hdr_word(ptr) == htonl((TCPOPT_NOP << 24)
- | (TCPOPT_NOP << 16)
- | (TCPOPT_TIMESTAMP << 8)
- | TCPOLEN_TIMESTAMP))
---- a/net/xfrm/xfrm_input.c
-+++ b/net/xfrm/xfrm_input.c
-@@ -194,8 +194,8 @@ int xfrm_parse_spi(struct sk_buff *skb,
- if (!pskb_may_pull(skb, hlen))
- return -EINVAL;
-
-- *spi = *(__be32 *)(skb_transport_header(skb) + offset);
-- *seq = *(__be32 *)(skb_transport_header(skb) + offset_seq);
-+ *spi = net_hdr_word(skb_transport_header(skb) + offset);
-+ *seq = net_hdr_word(skb_transport_header(skb) + offset_seq);
- return 0;
- }
- EXPORT_SYMBOL(xfrm_parse_spi);
---- a/net/ipv4/tcp_input.c
-+++ b/net/ipv4/tcp_input.c
-@@ -3907,14 +3907,16 @@ static bool tcp_parse_aligned_timestamp(
- {
- const __be32 *ptr = (const __be32 *)(th + 1);
-
-- if (*ptr == htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16)
-- | (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) {
-+ if (net_hdr_word(ptr) ==
-+ htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) |
-+ (TCPOPT_TIMESTAMP << 8) | TCPOLEN_TIMESTAMP)) {
- tp->rx_opt.saw_tstamp = 1;
- ++ptr;
-- tp->rx_opt.rcv_tsval = ntohl(*ptr);
-+ tp->rx_opt.rcv_tsval = get_unaligned_be32(ptr);
- ++ptr;
-- if (*ptr)
-- tp->rx_opt.rcv_tsecr = ntohl(*ptr) - tp->tsoffset;
-+ if (net_hdr_word(ptr))
-+ tp->rx_opt.rcv_tsecr = get_unaligned_be32(ptr) -
-+ tp->tsoffset;
- else
- tp->rx_opt.rcv_tsecr = 0;
- return true;
---- a/include/uapi/linux/if_pppox.h
-+++ b/include/uapi/linux/if_pppox.h
-@@ -51,6 +51,7 @@ struct pppoe_addr {
- */
- struct pptp_addr {
- __u16 call_id;
-+ __u16 pad;
- struct in_addr sin_addr;
- };
-
---- a/net/ipv6/netfilter/nf_log_ipv6.c
-+++ b/net/ipv6/netfilter/nf_log_ipv6.c
-@@ -66,9 +66,9 @@ static void dump_ipv6_packet(struct net
- /* Max length: 44 "LEN=65535 TC=255 HOPLIMIT=255 FLOWLBL=FFFFF " */
- nf_log_buf_add(m, "LEN=%zu TC=%u HOPLIMIT=%u FLOWLBL=%u ",
- ntohs(ih->payload_len) + sizeof(struct ipv6hdr),
-- (ntohl(*(__be32 *)ih) & 0x0ff00000) >> 20,
-+ (ntohl(net_hdr_word(ih)) & 0x0ff00000) >> 20,
- ih->hop_limit,
-- (ntohl(*(__be32 *)ih) & 0x000fffff));
-+ (ntohl(net_hdr_word(ih)) & 0x000fffff));
-
- fragment = 0;
- ptr = ip6hoff + sizeof(struct ipv6hdr);
---- a/include/net/neighbour.h
-+++ b/include/net/neighbour.h
-@@ -266,8 +266,10 @@ static inline bool neigh_key_eq128(const
- const u32 *n32 = (const u32 *)n->primary_key;
- const u32 *p32 = pkey;
-
-- return ((n32[0] ^ p32[0]) | (n32[1] ^ p32[1]) |
-- (n32[2] ^ p32[2]) | (n32[3] ^ p32[3])) == 0;
-+ return ((n32[0] ^ net_hdr_word(&p32[0])) |
-+ (n32[1] ^ net_hdr_word(&p32[1])) |
-+ (n32[2] ^ net_hdr_word(&p32[2])) |
-+ (n32[3] ^ net_hdr_word(&p32[3]))) == 0;
- }
-
- static inline struct neighbour *___neigh_lookup_noref(
---- a/include/uapi/linux/netfilter_arp/arp_tables.h
-+++ b/include/uapi/linux/netfilter_arp/arp_tables.h
-@@ -70,7 +70,7 @@ struct arpt_arp {
- __u8 flags;
- /* Inverse flags */
- __u16 invflags;
--};
-+} __attribute__((aligned(4)));
-
- /* Values for "flag" field in struct arpt_ip (general arp structure).
- * No flags defined yet.
---- a/net/core/utils.c
-+++ b/net/core/utils.c
-@@ -464,8 +464,14 @@ void inet_proto_csum_replace16(__sum16 *
- bool pseudohdr)
- {
- __be32 diff[] = {
-- ~from[0], ~from[1], ~from[2], ~from[3],
-- to[0], to[1], to[2], to[3],
-+ ~net_hdr_word(&from[0]),
-+ ~net_hdr_word(&from[1]),
-+ ~net_hdr_word(&from[2]),
-+ ~net_hdr_word(&from[3]),
-+ net_hdr_word(&to[0]),
-+ net_hdr_word(&to[1]),
-+ net_hdr_word(&to[2]),
-+ net_hdr_word(&to[3]),
- };
- if (skb->ip_summed != CHECKSUM_PARTIAL) {
- *sum = csum_fold(csum_partial(diff, sizeof(diff),
---- a/include/linux/etherdevice.h
-+++ b/include/linux/etherdevice.h
-@@ -480,7 +480,7 @@ static inline bool is_etherdev_addr(cons
- * @b: Pointer to Ethernet header
- *
- * Compare two Ethernet headers, returns 0 if equal.
-- * This assumes that the network header (i.e., IP header) is 4-byte
-+ * This assumes that the network header (i.e., IP header) is 2-byte
- * aligned OR the platform can handle unaligned access. This is the
- * case for all packets coming into netif_receive_skb or similar
- * entry points.
-@@ -503,11 +503,12 @@ static inline unsigned long compare_ethe
- fold |= *(unsigned long *)(a + 6) ^ *(unsigned long *)(b + 6);
- return fold;
- #else
-- u32 *a32 = (u32 *)((u8 *)a + 2);
-- u32 *b32 = (u32 *)((u8 *)b + 2);
-+ const u16 *a16 = a;
-+ const u16 *b16 = b;
-
-- return (*(u16 *)a ^ *(u16 *)b) | (a32[0] ^ b32[0]) |
-- (a32[1] ^ b32[1]) | (a32[2] ^ b32[2]);
-+ return (a16[0] ^ b16[0]) | (a16[1] ^ b16[1]) | (a16[2] ^ b16[2]) |
-+ (a16[3] ^ b16[3]) | (a16[4] ^ b16[4]) | (a16[5] ^ b16[5]) |
-+ (a16[6] ^ b16[6]);
- #endif
- }
-
---- a/net/ipv4/tcp_offload.c
-+++ b/net/ipv4/tcp_offload.c
-@@ -226,7 +226,7 @@ struct sk_buff *tcp_gro_receive(struct l
-
- th2 = tcp_hdr(p);
-
-- if (*(u32 *)&th->source ^ *(u32 *)&th2->source) {
-+ if (net_hdr_word(&th->source) ^ net_hdr_word(&th2->source)) {
- NAPI_GRO_CB(p)->same_flow = 0;
- continue;
- }
-@@ -244,8 +244,8 @@ found:
- ~(TCP_FLAG_CWR | TCP_FLAG_FIN | TCP_FLAG_PSH));
- flush |= (__force int)(th->ack_seq ^ th2->ack_seq);
- for (i = sizeof(*th); i < thlen; i += 4)
-- flush |= *(u32 *)((u8 *)th + i) ^
-- *(u32 *)((u8 *)th2 + i);
-+ flush |= net_hdr_word((u8 *)th + i) ^
-+ net_hdr_word((u8 *)th2 + i);
-
- /* When we receive our second frame we can made a decision on if we
- * continue this flow as an atomic flow with a fixed ID or if we use
---- a/net/ipv6/netfilter/ip6table_mangle.c
-+++ b/net/ipv6/netfilter/ip6table_mangle.c
-@@ -50,7 +50,7 @@ ip6t_mangle_out(struct sk_buff *skb, con
- hop_limit = ipv6_hdr(skb)->hop_limit;
-
- /* flowlabel and prio (includes version, which shouldn't change either */
-- flowlabel = *((u_int32_t *)ipv6_hdr(skb));
-+ flowlabel = net_hdr_word(ipv6_hdr(skb));
-
- ret = ip6t_do_table(skb, state, state->net->ipv6.ip6table_mangle);
-
-@@ -59,7 +59,7 @@ ip6t_mangle_out(struct sk_buff *skb, con
- !ipv6_addr_equal(&ipv6_hdr(skb)->daddr, &daddr) ||
- skb->mark != mark ||
- ipv6_hdr(skb)->hop_limit != hop_limit ||
-- flowlabel != *((u_int32_t *)ipv6_hdr(skb)))) {
-+ flowlabel != net_hdr_word(ipv6_hdr(skb)))) {
- err = ip6_route_me_harder(state->net, skb);
- if (err < 0)
- ret = NF_DROP_ERR(err);
+++ /dev/null
---- a/drivers/mfd/Kconfig
-+++ b/drivers/mfd/Kconfig
-@@ -1899,5 +1899,13 @@ config RAVE_SP_CORE
- Select this to get support for the Supervisory Processor
- device found on several devices in RAVE line of hardware.
-
-+config MFD_RB4XX_CPLD
-+ tristate "CPLD driver for Mikrotik RB4xx series boards
-+ select MFD_CORE
-+ depends on ATH79 || COMPILE_TEST
-+ help
-+ Enables support for the CPLD chip (NAND & GPIO) on Mikrotik
-+ Routerboard RB4xx series.
-+
- endmenu
- endif
---- a/drivers/mfd/Makefile
-+++ b/drivers/mfd/Makefile
-@@ -241,3 +241,4 @@ obj-$(CONFIG_MFD_SC27XX_PMIC) += sprd-sc
- obj-$(CONFIG_RAVE_SP_CORE) += rave-sp.o
- obj-$(CONFIG_MFD_ROHM_BD718XX) += rohm-bd718x7.o
-
-+obj-$(CONFIG_MFD_RB4XX_CPLD) += rb4xx-cpld.o
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -1371,6 +1371,12 @@ config GPIO_XRA1403
- help
- GPIO driver for EXAR XRA1403 16-bit SPI-based GPIO expander.
-
-+config GPIO_RB4XX
-+ tristate "GPIO expander for Mikrotik RB4xx series boards"
-+ depends on MFD_RB4XX_CPLD
-+ help
-+ GPIO driver for Mikrotik Routerboard RB4xx series.
-+
- endmenu
-
- menu "USB GPIO expanders"
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -159,3 +159,4 @@ obj-$(CONFIG_GPIO_ZEVIO) += gpio-zevio.o
- obj-$(CONFIG_GPIO_ZYNQ) += gpio-zynq.o
- obj-$(CONFIG_GPIO_ZX) += gpio-zx.o
- obj-$(CONFIG_GPIO_LOONGSON1) += gpio-loongson1.o
-+obj-$(CONFIG_GPIO_RB4XX) += gpio-rb4xx.o
---- a/drivers/mtd/nand/raw/Kconfig
-+++ b/drivers/mtd/nand/raw/Kconfig
-@@ -569,4 +569,11 @@ config MTD_NAND_AR934X
- Enables support for NAND controller on Qualcomm Atheros SoCs.
- This controller is found on AR934x and QCA955x SoCs.
-
-+config MTD_NAND_RB4XX
-+ tristate "Support for NAND driver for Mikrotik RB4xx series boards"
-+ depends on MFD_RB4XX_CPLD
-+ help
-+ Enables support for the NAND flash chip on Mikrotik Routerboard
-+ RB4xx series.
-+
- endif # MTD_NAND
---- a/drivers/mtd/nand/raw/Makefile
-+++ b/drivers/mtd/nand/raw/Makefile
-@@ -58,6 +58,7 @@ obj-$(CONFIG_MTD_NAND_QCOM) += qcom_nan
- obj-$(CONFIG_MTD_NAND_MTK) += mtk_ecc.o mtk_nand.o
- obj-$(CONFIG_MTD_NAND_TEGRA) += tegra_nand.o
- obj-$(CONFIG_MTD_NAND_AR934X) += ar934x_nand.o
-+obj-$(CONFIG_MTD_NAND_RB4XX) += nand_rb4xx.o
-
- nand-objs := nand_base.o nand_bbt.o nand_timings.o nand_ids.o
- nand-objs += nand_amd.o
+++ /dev/null
-From 4d3c17975c7814884a721fe693b3adf5c426d759 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Tue, 10 Nov 2015 22:18:39 +0100
-Subject: [RFC] serial: core: add support for boot console with arbitrary
- baud rates
-
-The Arduino Yun uses a baud rate of 250000 by default. The serial is
-going over the Atmel ATmega and is used to connect to this chip.
-Without this patch Linux wants to switch the console to 9600 Baud.
-
-With this patch Linux will use the configured baud rate and not a
-default one specified in uart_register_driver().
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-[rebased to 4.14, slightly reworded commit message]
-Signed-off-by: Sungbo Eo <mans0n@gorani.run>
----
- drivers/tty/serial/serial_core.c | 6 +++++-
- include/linux/console.h | 1 +
- 2 files changed, 6 insertions(+), 1 deletions(-)
-
---- a/drivers/tty/serial/serial_core.c
-+++ b/drivers/tty/serial/serial_core.c
-@@ -219,6 +219,8 @@ static int uart_port_startup(struct tty_
- if (retval == 0) {
- if (uart_console(uport) && uport->cons->cflag) {
- tty->termios.c_cflag = uport->cons->cflag;
-+ tty->termios.c_ospeed = uport->cons->baud;
-+ tty->termios.c_ispeed = uport->cons->baud;
- uport->cons->cflag = 0;
- }
- /*
-@@ -2058,8 +2060,10 @@ uart_set_options(struct uart_port *port,
- * Allow the setting of the UART parameters with a NULL console
- * too:
- */
-- if (co)
-+ if (co) {
- co->cflag = termios.c_cflag;
-+ co->baud = baud;
-+ }
-
- return 0;
- }
---- a/include/linux/console.h
-+++ b/include/linux/console.h
-@@ -153,6 +153,7 @@ struct console {
- short flags;
- short index;
- int cflag;
-+ int baud;
- void *data;
- struct console *next;
- };
+++ /dev/null
-CONFIG_ADM6996_PHY=y
-CONFIG_ARCH_BINFMT_ELF_STATE=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MMAP_RND_BITS_MAX=15
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
-CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_BCM47XX=y
-CONFIG_BCM47XX_BCMA=y
-CONFIG_BCM47XX_NVRAM=y
-CONFIG_BCM47XX_SPROM=y
-CONFIG_BCM47XX_SSB=y
-CONFIG_BCM47XX_WDT=y
-CONFIG_BCMA=y
-CONFIG_BCMA_BLOCKIO=y
-CONFIG_BCMA_DEBUG=y
-CONFIG_BCMA_DRIVER_GMAC_CMN=y
-CONFIG_BCMA_DRIVER_GPIO=y
-CONFIG_BCMA_DRIVER_MIPS=y
-CONFIG_BCMA_DRIVER_PCI=y
-CONFIG_BCMA_DRIVER_PCI_HOSTMODE=y
-CONFIG_BCMA_HOST_PCI=y
-CONFIG_BCMA_HOST_PCI_POSSIBLE=y
-CONFIG_BCMA_HOST_SOC=y
-CONFIG_BCMA_NFLASH=y
-CONFIG_BCMA_PFLASH=y
-CONFIG_BCMA_SFLASH=y
-# CONFIG_BGMAC_BCMA is not set
-CONFIG_BLK_MQ_PCI=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="noinitrd console=ttyS0,115200"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-# CONFIG_CPU_BMIPS is not set
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-CONFIG_CPU_MIPSR1=y
-CONFIG_CPU_MIPSR2_IRQ_VI=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_DIRECT_OPS=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NONCOHERENT_CACHE_SYNC=y
-CONFIG_DMA_NONCOHERENT_MMAP=y
-CONFIG_DMA_NONCOHERENT_OPS=y
-# CONFIG_EARLY_PRINTK is not set
-CONFIG_FIXED_PHY=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_LIB_ASHLDI3=y
-CONFIG_GENERIC_LIB_ASHRDI3=y
-CONFIG_GENERIC_LIB_CMPDI2=y
-CONFIG_GENERIC_LIB_LSHRDI3=y
-CONFIG_GENERIC_LIB_UCMPDI2=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_WDT=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_ARCH_COMPILER_H=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_CBPF_JIT=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_COPY_THREAD_TLS=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_RSEQ=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-CONFIG_LEDS_GPIO_REGISTER=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MIGRATION=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set
-CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_BCM47XXSFLASH=y
-CONFIG_MTD_BCM47XX_PARTS=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_BCM47XXNFLASH=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_PARSER_TRX=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NO_EXCEPT_FILL=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-# CONFIG_OF is not set
-CONFIG_PCI=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DRIVERS_LEGACY=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SRCU=y
-CONFIG_SSB=y
-CONFIG_SSB_B43_PCI_BRIDGE=y
-CONFIG_SSB_BLOCKIO=y
-CONFIG_SSB_DRIVER_EXTIF=y
-CONFIG_SSB_DRIVER_GIGE=y
-CONFIG_SSB_DRIVER_GPIO=y
-CONFIG_SSB_DRIVER_MIPS=y
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-CONFIG_SSB_EMBEDDED=y
-CONFIG_SSB_HOST_SOC=y
-CONFIG_SSB_PCICORE_HOSTMODE=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_SERIAL=y
-CONFIG_SSB_SFLASH=y
-CONFIG_SSB_SPROM=y
-CONFIG_SWCONFIG=y
-CONFIG_SWCONFIG_B53=y
-# CONFIG_SWCONFIG_B53_MMAP_DRIVER is not set
-CONFIG_SWCONFIG_B53_PHY_DRIVER=y
-CONFIG_SWCONFIG_B53_PHY_FIXUP=y
-# CONFIG_SWCONFIG_B53_SRAB_DRIVER is not set
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_BMIPS=y
-CONFIG_SYS_HAS_CPU_BMIPS32_3300=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_HIGHMEM=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TINY_SRCU=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_GENERIC_EARLY_PRINTK_8250=y
-CONFIG_WATCHDOG_CORE=y
+++ /dev/null
-From cdb8faa00e3fcdd0ad10add743516d616dc7d38e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Petr=20=C5=A0tetiar?= <ynezz@true.cz>
-Date: Mon, 11 Mar 2019 22:08:22 +0100
-Subject: [PATCH] mips: bcm47xx: Enable USB power on Netgear WNDR3400v2
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Eric has reported on OpenWrt's bug tracking system[1], that he's not
-able to use USB devices on his WNDR3400v2 device after the boot, until
-he turns on GPIO #21 manually through sysfs.
-
-1. https://bugs.openwrt.org/index.php?do=details&task_id=2170
-
-Cc: Rafał Miłecki <zajec5@gmail.com>
-Cc: Hauke Mehrtens <hauke@hauke-m.de>
-Reported-by: Eric Bohlman <ericbohlman@gmail.com>
-Tested-by: Eric Bohlman <ericbohlman@gmail.com>
-Signed-off-by: Petr Štetiar <ynezz@true.cz>
-Signed-off-by: Paul Burton <paul.burton@mips.com>
----
- arch/mips/bcm47xx/workarounds.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/mips/bcm47xx/workarounds.c
-+++ b/arch/mips/bcm47xx/workarounds.c
-@@ -24,6 +24,7 @@ void __init bcm47xx_workarounds(void)
- case BCM47XX_BOARD_NETGEAR_WNR3500L:
- bcm47xx_workarounds_enable_usb_power(12);
- break;
-+ case BCM47XX_BOARD_NETGEAR_WNDR3400V2:
- case BCM47XX_BOARD_NETGEAR_WNDR3400_V3:
- bcm47xx_workarounds_enable_usb_power(21);
- break;
+++ /dev/null
---- a/arch/mips/bcm47xx/board.c
-+++ b/arch/mips/bcm47xx/board.c
-@@ -160,6 +160,7 @@ struct bcm47xx_board_type_list1 bcm47xx_
- {{BCM47XX_BOARD_LUXUL_XVW_P30_V1, "Luxul XVW-P30 V1"}, "luxul_xvwp30_v1"},
- {{BCM47XX_BOARD_LUXUL_XWR_600_V1, "Luxul XWR-600 V1"}, "luxul_xwr600_v1"},
- {{BCM47XX_BOARD_LUXUL_XWR_1750_V1, "Luxul XWR-1750 V1"}, "luxul_xwr1750_v1"},
-+ {{BCM47XX_BOARD_NETGEAR_R6200_V1, "Netgear R6200 V1"}, "U12H192T00_NETGEAR"},
- {{BCM47XX_BOARD_NETGEAR_WGR614V8, "Netgear WGR614 V8"}, "U12H072T00_NETGEAR"},
- {{BCM47XX_BOARD_NETGEAR_WGR614V9, "Netgear WGR614 V9"}, "U12H094T00_NETGEAR"},
- {{BCM47XX_BOARD_NETGEAR_WGR614_V10, "Netgear WGR614 V10"}, "U12H139T01_NETGEAR"},
---- a/arch/mips/bcm47xx/buttons.c
-+++ b/arch/mips/bcm47xx/buttons.c
-@@ -385,6 +385,13 @@ bcm47xx_buttons_motorola_wr850gv2v3[] __
- /* Netgear */
-
- static const struct gpio_keys_button
-+bcm47xx_buttons_netgear_r6200_v1[] __initconst = {
-+ BCM47XX_GPIO_KEY(2, KEY_RFKILL),
-+ BCM47XX_GPIO_KEY(3, KEY_RESTART),
-+ BCM47XX_GPIO_KEY(4, KEY_WPS_BUTTON),
-+};
-+
-+static const struct gpio_keys_button
- bcm47xx_buttons_netgear_wndr3400v1[] __initconst = {
- BCM47XX_GPIO_KEY(4, KEY_RESTART),
- BCM47XX_GPIO_KEY(6, KEY_WPS_BUTTON),
-@@ -664,6 +671,9 @@ int __init bcm47xx_buttons_register(void
- err = bcm47xx_copy_bdata(bcm47xx_buttons_motorola_wr850gv2v3);
- break;
-
-+ case BCM47XX_BOARD_NETGEAR_R6200_V1:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_r6200_v1);
-+ break;
- case BCM47XX_BOARD_NETGEAR_WNDR3400V1:
- err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr3400v1);
- break;
---- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-@@ -98,6 +98,7 @@ enum bcm47xx_board {
- BCM47XX_BOARD_MOTOROLA_WR850GP,
- BCM47XX_BOARD_MOTOROLA_WR850GV2V3,
-
-+ BCM47XX_BOARD_NETGEAR_R6200_V1,
- BCM47XX_BOARD_NETGEAR_WGR614V8,
- BCM47XX_BOARD_NETGEAR_WGR614V9,
- BCM47XX_BOARD_NETGEAR_WGR614_V10,
+++ /dev/null
---- a/arch/mips/include/asm/r4kcache.h
-+++ b/arch/mips/include/asm/r4kcache.h
-@@ -26,6 +26,38 @@
- extern void (*r4k_blast_dcache)(void);
- extern void (*r4k_blast_icache)(void);
-
-+#if defined(CONFIG_BCM47XX) && !defined(CONFIG_CPU_MIPS32_R2)
-+#include <asm/paccess.h>
-+#include <linux/ssb/ssb.h>
-+#define BCM4710_DUMMY_RREG() bcm4710_dummy_rreg()
-+
-+static inline unsigned long bcm4710_dummy_rreg(void)
-+{
-+ return *(volatile unsigned long *)(KSEG1ADDR(SSB_ENUM_BASE));
-+}
-+
-+#define BCM4710_FILL_TLB(addr) bcm4710_fill_tlb((void *)(addr))
-+
-+static inline unsigned long bcm4710_fill_tlb(void *addr)
-+{
-+ return *(unsigned long *)addr;
-+}
-+
-+#define BCM4710_PROTECTED_FILL_TLB(addr) bcm4710_protected_fill_tlb((void *)(addr))
-+
-+static inline void bcm4710_protected_fill_tlb(void *addr)
-+{
-+ unsigned long x;
-+ get_dbe(x, (unsigned long *)addr);;
-+}
-+
-+#else
-+#define BCM4710_DUMMY_RREG()
-+
-+#define BCM4710_FILL_TLB(addr)
-+#define BCM4710_PROTECTED_FILL_TLB(addr)
-+#endif
-+
- /*
- * This macro return a properly sign-extended address suitable as base address
- * for indexed cache operations. Two issues here:
-@@ -99,6 +131,7 @@ static inline void flush_icache_line_ind
- static inline void flush_dcache_line_indexed(unsigned long addr)
- {
- __dflush_prologue
-+ BCM4710_DUMMY_RREG();
- cache_op(Index_Writeback_Inv_D, addr);
- __dflush_epilogue
- }
-@@ -126,6 +159,7 @@ static inline void flush_icache_line(uns
- static inline void flush_dcache_line(unsigned long addr)
- {
- __dflush_prologue
-+ BCM4710_DUMMY_RREG();
- cache_op(Hit_Writeback_Inv_D, addr);
- __dflush_epilogue
- }
-@@ -133,6 +167,7 @@ static inline void flush_dcache_line(uns
- static inline void invalidate_dcache_line(unsigned long addr)
- {
- __dflush_prologue
-+ BCM4710_DUMMY_RREG();
- cache_op(Hit_Invalidate_D, addr);
- __dflush_epilogue
- }
-@@ -206,6 +241,7 @@ static inline int protected_flush_icache
- #ifdef CONFIG_EVA
- return protected_cachee_op(Hit_Invalidate_I, addr);
- #else
-+ BCM4710_DUMMY_RREG();
- return protected_cache_op(Hit_Invalidate_I, addr);
- #endif
- }
-@@ -219,6 +255,7 @@ static inline int protected_flush_icache
- */
- static inline int protected_writeback_dcache_line(unsigned long addr)
- {
-+ BCM4710_DUMMY_RREG();
- #ifdef CONFIG_EVA
- return protected_cachee_op(Hit_Writeback_Inv_D, addr);
- #else
-@@ -576,8 +613,51 @@ static inline void invalidate_tcache_pag
- : "r" (base), \
- "i" (op));
-
-+static inline void blast_dcache(void)
-+{
-+ unsigned long start = KSEG0;
-+ unsigned long dcache_size = current_cpu_data.dcache.waysize * current_cpu_data.dcache.ways;
-+ unsigned long end = (start + dcache_size);
-+
-+ do {
-+ BCM4710_DUMMY_RREG();
-+ cache_op(Index_Writeback_Inv_D, start);
-+ start += current_cpu_data.dcache.linesz;
-+ } while(start < end);
-+}
-+
-+static inline void blast_dcache_page(unsigned long page)
-+{
-+ unsigned long start = page;
-+ unsigned long end = start + PAGE_SIZE;
-+
-+ BCM4710_FILL_TLB(start);
-+ do {
-+ BCM4710_DUMMY_RREG();
-+ cache_op(Hit_Writeback_Inv_D, start);
-+ start += current_cpu_data.dcache.linesz;
-+ } while(start < end);
-+}
-+
-+static inline void blast_dcache_page_indexed(unsigned long page)
-+{
-+ unsigned long start = page;
-+ unsigned long end = start + PAGE_SIZE;
-+ unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit;
-+ unsigned long ws_end = current_cpu_data.dcache.ways <<
-+ current_cpu_data.dcache.waybit;
-+ unsigned long ws, addr;
-+ for (ws = 0; ws < ws_end; ws += ws_inc) {
-+ start = page + ws;
-+ for (addr = start; addr < end; addr += current_cpu_data.dcache.linesz) {
-+ BCM4710_DUMMY_RREG();
-+ cache_op(Index_Writeback_Inv_D, addr);
-+ }
-+ }
-+}
-+
- /* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */
--#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, extra) \
-+#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, extra, war) \
- static inline void extra##blast_##pfx##cache##lsize(void) \
- { \
- unsigned long start = INDEX_BASE; \
-@@ -589,6 +669,7 @@ static inline void extra##blast_##pfx##c
- \
- __##pfx##flush_prologue \
- \
-+ war \
- for (ws = 0; ws < ws_end; ws += ws_inc) \
- for (addr = start; addr < end; addr += lsize * 32) \
- cache##lsize##_unroll32(addr|ws, indexop); \
-@@ -603,6 +684,7 @@ static inline void extra##blast_##pfx##c
- \
- __##pfx##flush_prologue \
- \
-+ war \
- do { \
- cache##lsize##_unroll32(start, hitop); \
- start += lsize * 32; \
-@@ -621,6 +703,8 @@ static inline void extra##blast_##pfx##c
- current_cpu_data.desc.waybit; \
- unsigned long ws, addr; \
- \
-+ war \
-+ \
- __##pfx##flush_prologue \
- \
- for (ws = 0; ws < ws_end; ws += ws_inc) \
-@@ -630,26 +714,26 @@ static inline void extra##blast_##pfx##c
- __##pfx##flush_epilogue \
- }
-
--__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, )
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, )
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, )
--__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, )
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, )
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I_Loongson2, 32, loongson2_)
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, )
--__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, )
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, )
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, )
--__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 128, )
--__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 128, )
--__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, )
--
--__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, )
--__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, )
--__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, )
--__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, )
--__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, )
--__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, )
-+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, , )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, , BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, , )
-+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, , )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, , BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I_Loongson2, 32, loongson2_, BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, , )
-+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 64, , )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, , BCM4710_FILL_TLB(start);)
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, , )
-+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 128, , )
-+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 128, , )
-+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, , )
-+
-+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 16, , )
-+__BUILD_BLAST_CACHE(inv_d, dcache, Index_Writeback_Inv_D, Hit_Invalidate_D, 32, , )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 16, , )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 32, , )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 64, , )
-+__BUILD_BLAST_CACHE(inv_s, scache, Index_Writeback_Inv_SD, Hit_Invalidate_SD, 128, , )
-
- #define __BUILD_BLAST_USER_CACHE(pfx, desc, indexop, hitop, lsize) \
- static inline void blast_##pfx##cache##lsize##_user_page(unsigned long page) \
-@@ -678,53 +762,23 @@ __BUILD_BLAST_USER_CACHE(d, dcache, Inde
- __BUILD_BLAST_USER_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64)
-
- /* build blast_xxx_range, protected_blast_xxx_range */
--#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, extra) \
-+#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, extra, war, war2) \
- static inline void prot##extra##blast_##pfx##cache##_range(unsigned long start, \
- unsigned long end) \
- { \
- unsigned long lsize = cpu_##desc##_line_size(); \
-- unsigned long lsize_2 = lsize * 2; \
-- unsigned long lsize_3 = lsize * 3; \
-- unsigned long lsize_4 = lsize * 4; \
-- unsigned long lsize_5 = lsize * 5; \
-- unsigned long lsize_6 = lsize * 6; \
-- unsigned long lsize_7 = lsize * 7; \
-- unsigned long lsize_8 = lsize * 8; \
- unsigned long addr = start & ~(lsize - 1); \
-- unsigned long aend = (end + lsize - 1) & ~(lsize - 1); \
-- int lines = (aend - addr) / lsize; \
-+ unsigned long aend = (end - 1) & ~(lsize - 1); \
-+ war \
- \
- __##pfx##flush_prologue \
- \
-- while (lines >= 8) { \
-- prot##cache_op(hitop, addr); \
-- prot##cache_op(hitop, addr + lsize); \
-- prot##cache_op(hitop, addr + lsize_2); \
-- prot##cache_op(hitop, addr + lsize_3); \
-- prot##cache_op(hitop, addr + lsize_4); \
-- prot##cache_op(hitop, addr + lsize_5); \
-- prot##cache_op(hitop, addr + lsize_6); \
-- prot##cache_op(hitop, addr + lsize_7); \
-- addr += lsize_8; \
-- lines -= 8; \
-- } \
-- \
-- if (lines & 0x4) { \
-- prot##cache_op(hitop, addr); \
-- prot##cache_op(hitop, addr + lsize); \
-- prot##cache_op(hitop, addr + lsize_2); \
-- prot##cache_op(hitop, addr + lsize_3); \
-- addr += lsize_4; \
-- } \
-- \
-- if (lines & 0x2) { \
-- prot##cache_op(hitop, addr); \
-- prot##cache_op(hitop, addr + lsize); \
-- addr += lsize_2; \
-- } \
-- \
-- if (lines & 0x1) { \
-+ while (1) { \
-+ war2 \
- prot##cache_op(hitop, addr); \
-+ if (addr == aend) \
-+ break; \
-+ addr += lsize; \
- } \
- \
- __##pfx##flush_epilogue \
-@@ -732,8 +786,8 @@ static inline void prot##extra##blast_##
-
- #ifndef CONFIG_EVA
-
--__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, )
--__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_, )
-+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, , BCM4710_PROTECTED_FILL_TLB(addr); BCM4710_PROTECTED_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
-+__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_, , , )
-
- #else
-
-@@ -770,15 +824,15 @@ __BUILD_PROT_BLAST_CACHE_RANGE(d, dcache
- __BUILD_PROT_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I)
-
- #endif
--__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_, )
-+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_, , , )
- __BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I_Loongson2, \
-- protected_, loongson2_)
--__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, , )
--__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, , )
--__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, , )
-+ protected_, loongson2_, , )
-+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, , , BCM4710_FILL_TLB(addr); BCM4710_FILL_TLB(aend);, BCM4710_DUMMY_RREG();)
-+__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, , , , )
-+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, , , , )
- /* blast_inv_dcache_range */
--__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, , )
--__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, , )
-+__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, , , , BCM4710_DUMMY_RREG();)
-+__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, , , , )
-
- /* Currently, this is very specific to Loongson-3 */
- #define __BUILD_BLAST_CACHE_NODE(pfx, desc, indexop, hitop, lsize) \
---- a/arch/mips/include/asm/stackframe.h
-+++ b/arch/mips/include/asm/stackframe.h
-@@ -428,6 +428,10 @@
- eretnc
- #else
- .set arch=r4000
-+#ifdef CONFIG_BCM47XX
-+ nop
-+ nop
-+#endif
- eret
- .set mips0
- #endif
---- a/arch/mips/kernel/genex.S
-+++ b/arch/mips/kernel/genex.S
-@@ -21,6 +21,19 @@
- #include <asm/war.h>
- #include <asm/thread_info.h>
-
-+#ifdef CONFIG_BCM47XX
-+# ifdef eret
-+# undef eret
-+# endif
-+# define eret \
-+ .set push; \
-+ .set noreorder; \
-+ nop; \
-+ nop; \
-+ eret; \
-+ .set pop;
-+#endif
-+
- __INIT
-
- /*
-@@ -32,6 +45,9 @@
- NESTED(except_vec3_generic, 0, sp)
- .set push
- .set noat
-+#ifdef CONFIG_BCM47XX
-+ nop
-+#endif
- #if R5432_CP0_INTERRUPT_WAR
- mfc0 k0, CP0_INDEX
- #endif
-@@ -55,6 +71,9 @@ NESTED(except_vec3_r4000, 0, sp)
- .set push
- .set arch=r4000
- .set noat
-+#ifdef CONFIG_BCM47XX
-+ nop
-+#endif
- mfc0 k1, CP0_CAUSE
- li k0, 31<<2
- andi k1, k1, 0x7c
---- a/arch/mips/mm/c-r4k.c
-+++ b/arch/mips/mm/c-r4k.c
-@@ -39,6 +39,9 @@
- #include <asm/dma-coherence.h>
- #include <asm/mips-cps.h>
-
-+/* For enabling BCM4710 cache workarounds */
-+static int bcm4710 = 0;
-+
- /*
- * Bits describing what cache ops an SMP callback function may perform.
- *
-@@ -190,6 +193,9 @@ static void r4k_blast_dcache_user_page_s
- {
- unsigned long dc_lsize = cpu_dcache_line_size();
-
-+ if (bcm4710)
-+ r4k_blast_dcache_page = blast_dcache_page;
-+ else
- if (dc_lsize == 0)
- r4k_blast_dcache_user_page = (void *)cache_noop;
- else if (dc_lsize == 16)
-@@ -208,6 +214,9 @@ static void r4k_blast_dcache_page_indexe
- {
- unsigned long dc_lsize = cpu_dcache_line_size();
-
-+ if (bcm4710)
-+ r4k_blast_dcache_page_indexed = blast_dcache_page_indexed;
-+ else
- if (dc_lsize == 0)
- r4k_blast_dcache_page_indexed = (void *)cache_noop;
- else if (dc_lsize == 16)
-@@ -227,6 +236,9 @@ static void r4k_blast_dcache_setup(void)
- {
- unsigned long dc_lsize = cpu_dcache_line_size();
-
-+ if (bcm4710)
-+ r4k_blast_dcache = blast_dcache;
-+ else
- if (dc_lsize == 0)
- r4k_blast_dcache = (void *)cache_noop;
- else if (dc_lsize == 16)
-@@ -986,6 +998,8 @@ static void local_r4k_flush_cache_sigtra
- }
-
- R4600_HIT_CACHEOP_WAR_IMPL;
-+ BCM4710_PROTECTED_FILL_TLB(addr);
-+ BCM4710_PROTECTED_FILL_TLB(addr + 4);
- if (!cpu_has_ic_fills_f_dc) {
- if (dc_lsize)
- vaddr ? flush_dcache_line(addr & ~(dc_lsize - 1))
-@@ -1888,6 +1902,17 @@ static void coherency_setup(void)
- * silly idea of putting something else there ...
- */
- switch (current_cpu_type()) {
-+ case CPU_BMIPS3300:
-+ {
-+ u32 cm;
-+ cm = read_c0_diag();
-+ /* Enable icache */
-+ cm |= (1 << 31);
-+ /* Enable dcache */
-+ cm |= (1 << 30);
-+ write_c0_diag(cm);
-+ }
-+ break;
- case CPU_R4000PC:
- case CPU_R4000SC:
- case CPU_R4000MC:
-@@ -1934,6 +1959,15 @@ void r4k_cache_init(void)
- extern void build_copy_page(void);
- struct cpuinfo_mips *c = ¤t_cpu_data;
-
-+ /* Check if special workarounds are required */
-+#if defined(CONFIG_BCM47XX) && !defined(CONFIG_CPU_MIPS32_R2)
-+ if (current_cpu_data.cputype == CPU_BMIPS32 && (current_cpu_data.processor_id & 0xff) == 0) {
-+ printk("Enabling BCM4710A0 cache workarounds.\n");
-+ bcm4710 = 1;
-+ } else
-+#endif
-+ bcm4710 = 0;
-+
- probe_pcache();
- probe_vcache();
- setup_scache();
-@@ -2012,7 +2046,15 @@ void r4k_cache_init(void)
- */
- local_r4k___flush_cache_all(NULL);
-
-+#ifdef CONFIG_BCM47XX
-+ {
-+ static void (*_coherency_setup)(void);
-+ _coherency_setup = (void (*)(void)) KSEG1ADDR(coherency_setup);
-+ _coherency_setup();
-+ }
-+#else
- coherency_setup();
-+#endif
- board_cache_error_setup = r4k_cache_error_setup;
-
- /*
---- a/arch/mips/mm/tlbex.c
-+++ b/arch/mips/mm/tlbex.c
-@@ -979,6 +979,9 @@ void build_get_pgde32(u32 **p, unsigned
- uasm_i_srl(p, ptr, ptr, SMP_CPUID_PTRSHIFT);
- uasm_i_addu(p, ptr, tmp, ptr);
- #else
-+#ifdef CONFIG_BCM47XX
-+ uasm_i_nop(p);
-+#endif
- UASM_i_LA_mostly(p, ptr, pgdc);
- #endif
- uasm_i_mfc0(p, tmp, C0_BADVADDR); /* get faulting address */
-@@ -1340,6 +1343,9 @@ static void build_r4000_tlb_refill_handl
- #ifdef CONFIG_64BIT
- build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */
- #else
-+# ifdef CONFIG_BCM47XX
-+ uasm_i_nop(&p);
-+# endif
- build_get_pgde32(&p, K0, K1); /* get pgd in K1 */
- #endif
-
-@@ -1351,6 +1357,9 @@ static void build_r4000_tlb_refill_handl
- build_update_entries(&p, K0, K1);
- build_tlb_write_entry(&p, &l, &r, tlb_random);
- uasm_l_leave(&l, p);
-+#ifdef CONFIG_BCM47XX
-+ uasm_i_nop(&p);
-+#endif
- uasm_i_eret(&p); /* return from trap */
- }
- #ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT
-@@ -2049,6 +2058,9 @@ build_r4000_tlbchange_handler_head(u32 *
- #ifdef CONFIG_64BIT
- build_get_pmde64(p, l, r, wr.r1, wr.r2); /* get pmd in ptr */
- #else
-+# ifdef CONFIG_BCM47XX
-+ uasm_i_nop(p);
-+# endif
- build_get_pgde32(p, wr.r1, wr.r2); /* get pgd in ptr */
- #endif
-
-@@ -2095,6 +2107,9 @@ build_r4000_tlbchange_handler_tail(u32 *
- build_tlb_write_entry(p, l, r, tlb_indexed);
- uasm_l_leave(l, *p);
- build_restore_work_registers(p);
-+#ifdef CONFIG_BCM47XX
-+ uasm_i_nop(p);
-+#endif
- uasm_i_eret(p); /* return from trap */
-
- #ifdef CONFIG_64BIT
+++ /dev/null
-From: Jeff Hansen <jhansen@cardaccess-inc.com>
-Subject: [PATCH] kmap_coherent
-
-On ASUS WL-500gP there are some "Data bus error"s when executing simple
-commands liks "ps" or "cat /proc/1/cmdline".
-
-This fixes OpenWrt ticket #1485: https://dev.openwrt.org/ticket/1485
----
---- a/arch/mips/include/asm/cpu-features.h
-+++ b/arch/mips/include/asm/cpu-features.h
-@@ -226,6 +226,9 @@
- #ifndef cpu_has_local_ebase
- #define cpu_has_local_ebase 1
- #endif
-+#ifndef cpu_use_kmap_coherent
-+#define cpu_use_kmap_coherent 1
-+#endif
-
- /*
- * I-Cache snoops remote store. This only matters on SMP. Some multiprocessors
---- a/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/cpu-feature-overrides.h
-@@ -80,4 +80,6 @@
- #define cpu_scache_line_size() 0
- #define cpu_has_vz 0
-
-+#define cpu_use_kmap_coherent 0
-+
- #endif /* __ASM_MACH_BCM47XX_CPU_FEATURE_OVERRIDES_H */
---- a/arch/mips/mm/c-r4k.c
-+++ b/arch/mips/mm/c-r4k.c
-@@ -694,7 +694,7 @@ static inline void local_r4k_flush_cache
- map_coherent = (cpu_has_dc_aliases &&
- page_mapcount(page) &&
- !Page_dcache_dirty(page));
-- if (map_coherent)
-+ if (map_coherent && cpu_use_kmap_coherent)
- vaddr = kmap_coherent(page, addr);
- else
- vaddr = kmap_atomic(page);
-@@ -719,7 +719,7 @@ static inline void local_r4k_flush_cache
- }
-
- if (vaddr) {
-- if (map_coherent)
-+ if (map_coherent && cpu_use_kmap_coherent)
- kunmap_coherent();
- else
- kunmap_atomic(vaddr);
---- a/arch/mips/mm/init.c
-+++ b/arch/mips/mm/init.c
-@@ -168,7 +168,7 @@ void copy_user_highpage(struct page *to,
- void *vfrom, *vto;
-
- vto = kmap_atomic(to);
-- if (cpu_has_dc_aliases &&
-+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
- page_mapcount(from) && !Page_dcache_dirty(from)) {
- vfrom = kmap_coherent(from, vaddr);
- copy_page(vto, vfrom);
-@@ -190,7 +190,7 @@ void copy_to_user_page(struct vm_area_st
- struct page *page, unsigned long vaddr, void *dst, const void *src,
- unsigned long len)
- {
-- if (cpu_has_dc_aliases &&
-+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
- page_mapcount(page) && !Page_dcache_dirty(page)) {
- void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
- memcpy(vto, src, len);
-@@ -208,7 +208,7 @@ void copy_from_user_page(struct vm_area_
- struct page *page, unsigned long vaddr, void *dst, const void *src,
- unsigned long len)
- {
-- if (cpu_has_dc_aliases &&
-+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
- page_mapcount(page) && !Page_dcache_dirty(page)) {
- void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
- memcpy(dst, vfrom, len);
+++ /dev/null
-From b36f694256f41bc71571f467646d015dda128d14 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sat, 9 Nov 2013 17:03:59 +0100
-Subject: [PATCH 210/210] b44: register adm switch
-
----
- drivers/net/ethernet/broadcom/b44.c | 57 +++++++++++++++++++++++++++++++++++
- drivers/net/ethernet/broadcom/b44.h | 3 ++
- 2 files changed, 60 insertions(+)
-
---- a/drivers/net/ethernet/broadcom/b44.c
-+++ b/drivers/net/ethernet/broadcom/b44.c
-@@ -31,6 +31,8 @@
- #include <linux/ssb/ssb.h>
- #include <linux/slab.h>
- #include <linux/phy.h>
-+#include <linux/platform_device.h>
-+#include <linux/platform_data/adm6996-gpio.h>
-
- #include <linux/uaccess.h>
- #include <asm/io.h>
-@@ -2249,6 +2251,69 @@ static void b44_adjust_link(struct net_d
- }
- }
-
-+#ifdef CONFIG_BCM47XX
-+static int b44_register_adm_switch(struct b44 *bp)
-+{
-+ int gpio;
-+ struct platform_device *pdev;
-+ struct adm6996_gpio_platform_data adm_data = {0};
-+ struct platform_device_info info = {0};
-+
-+ adm_data.model = ADM6996L;
-+ gpio = bcm47xx_nvram_gpio_pin("adm_eecs");
-+ if (gpio >= 0)
-+ adm_data.eecs = gpio;
-+ else
-+ adm_data.eecs = 2;
-+
-+ gpio = bcm47xx_nvram_gpio_pin("adm_eesk");
-+ if (gpio >= 0)
-+ adm_data.eesk = gpio;
-+ else
-+ adm_data.eesk = 3;
-+
-+ gpio = bcm47xx_nvram_gpio_pin("adm_eedi");
-+ if (gpio >= 0)
-+ adm_data.eedi = gpio;
-+ else
-+ adm_data.eedi = 4;
-+
-+ /*
-+ * We ignore the "adm_rc" GPIO here. The driver does not use it,
-+ * and it conflicts with the Reset button GPIO on the Linksys WRT54GSv1.
-+ */
-+
-+ info.parent = bp->sdev->dev;
-+ info.name = "adm6996_gpio";
-+ info.id = -1;
-+ info.data = &adm_data;
-+ info.size_data = sizeof(adm_data);
-+
-+ if (!bp->adm_switch) {
-+ pdev = platform_device_register_full(&info);
-+ if (IS_ERR(pdev))
-+ return PTR_ERR(pdev);
-+
-+ bp->adm_switch = pdev;
-+ }
-+ return 0;
-+}
-+static void b44_unregister_adm_switch(struct b44 *bp)
-+{
-+ if (bp->adm_switch)
-+ platform_device_unregister(bp->adm_switch);
-+}
-+#else
-+static int b44_register_adm_switch(struct b44 *bp)
-+{
-+ return 0;
-+}
-+static void b44_unregister_adm_switch(struct b44 *bp)
-+{
-+
-+}
-+#endif /* CONFIG_BCM47XX */
-+
- static int b44_register_phy_one(struct b44 *bp)
- {
- struct mii_bus *mii_bus;
-@@ -2284,6 +2349,9 @@ static int b44_register_phy_one(struct b
- if (!mdiobus_is_registered_device(bp->mii_bus, bp->phy_addr) &&
- (sprom->boardflags_lo & (B44_BOARDFLAG_ROBO | B44_BOARDFLAG_ADM))) {
-
-+ if (sprom->boardflags_lo & B44_BOARDFLAG_ADM)
-+ b44_register_adm_switch(bp);
-+
- dev_info(sdev->dev,
- "could not find PHY at %i, use fixed one\n",
- bp->phy_addr);
-@@ -2478,6 +2546,7 @@ static void b44_remove_one(struct ssb_de
- unregister_netdev(dev);
- if (bp->flags & B44_FLAG_EXTERNAL_PHY)
- b44_unregister_phy_one(bp);
-+ b44_unregister_adm_switch(bp);
- ssb_device_disable(sdev, 0);
- ssb_bus_may_powerdown(sdev->bus);
- netif_napi_del(&bp->napi);
---- a/drivers/net/ethernet/broadcom/b44.h
-+++ b/drivers/net/ethernet/broadcom/b44.h
-@@ -408,6 +408,9 @@ struct b44 {
- struct mii_bus *mii_bus;
- int old_link;
- struct mii_if_info mii_if;
-+
-+ /* platform device for associated switch */
-+ struct platform_device *adm_switch;
- };
-
- #endif /* _B44_H */
+++ /dev/null
---- a/drivers/net/ethernet/broadcom/b44.c
-+++ b/drivers/net/ethernet/broadcom/b44.c
-@@ -431,10 +431,34 @@ static void b44_wap54g10_workaround(stru
- error:
- pr_warn("PHY: cannot reset MII transceiver isolate bit\n");
- }
-+
-+static void b44_bcm47xx_workarounds(struct b44 *bp)
-+{
-+ char buf[20];
-+ struct ssb_device *sdev = bp->sdev;
-+
-+ /* Toshiba WRC-1000, Siemens SE505 v1, Askey RT-210W, RT-220W */
-+ if (sdev->bus->sprom.board_num == 100) {
-+ bp->phy_addr = B44_PHY_ADDR_NO_LOCAL_PHY;
-+ } else {
-+ /* WL-HDD */
-+ if (bcm47xx_nvram_getenv("hardware_version", buf, sizeof(buf)) >= 0 &&
-+ !strncmp(buf, "WL300-", strlen("WL300-"))) {
-+ if (sdev->bus->sprom.et0phyaddr == 0 &&
-+ sdev->bus->sprom.et1phyaddr == 1)
-+ bp->phy_addr = B44_PHY_ADDR_NO_LOCAL_PHY;
-+ }
-+ }
-+ return;
-+}
- #else
- static inline void b44_wap54g10_workaround(struct b44 *bp)
- {
- }
-+
-+static inline void b44_bcm47xx_workarounds(struct b44 *bp)
-+{
-+}
- #endif
-
- static int b44_setup_phy(struct b44 *bp)
-@@ -443,6 +467,7 @@ static int b44_setup_phy(struct b44 *bp)
- int err;
-
- b44_wap54g10_workaround(bp);
-+ b44_bcm47xx_workarounds(bp);
-
- if (bp->flags & B44_FLAG_EXTERNAL_PHY)
- return 0;
-@@ -2179,6 +2204,8 @@ static int b44_get_invariants(struct b44
- * valid PHY address. */
- bp->phy_addr &= 0x1F;
-
-+ b44_bcm47xx_workarounds(bp);
-+
- memcpy(bp->dev->dev_addr, addr, ETH_ALEN);
-
- if (!is_valid_ether_addr(&bp->dev->dev_addr[0])){
+++ /dev/null
-This prevents the options from being delete with make kernel_oldconfig.
----
- drivers/ssb/Kconfig | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/bcma/Kconfig
-+++ b/drivers/bcma/Kconfig
-@@ -32,6 +32,7 @@ config BCMA_HOST_PCI
- config BCMA_HOST_SOC
- bool "Support for BCMA in a SoC"
- depends on HAS_IOMEM
-+ select USB_HCD_BCMA if USB_EHCI_HCD || USB_OHCI_HCD
- help
- Host interface for a Broadcom AIX bus directly mapped into
- the memory. This only works with the Broadcom SoCs from the
---- a/drivers/ssb/Kconfig
-+++ b/drivers/ssb/Kconfig
-@@ -135,6 +135,7 @@ config SSB_SFLASH
- config SSB_EMBEDDED
- bool
- depends on SSB_DRIVER_MIPS && SSB_PCICORE_HOSTMODE
-+ select USB_HCD_SSB if USB_EHCI_HCD || USB_OHCI_HCD
- default y
-
- config SSB_DRIVER_EXTIF
+++ /dev/null
-From: Wolfram Joost <dbox2@frokaschwei.de>
-Subject: [PATCH] fork_cacheflush
-
-On ASUS WL-500gP there are many unexpected "Segmentation fault"s that
-seem to be caused by a kernel. They can be avoided by:
-1) Disabling highpage
-2) Using flush_cache_mm in flush_cache_dup_mm
-
-For details see OpenWrt ticket #2035 https://dev.openwrt.org/ticket/2035
----
---- a/arch/mips/include/asm/cacheflush.h
-+++ b/arch/mips/include/asm/cacheflush.h
-@@ -47,7 +47,7 @@
- extern void (*flush_cache_all)(void);
- extern void (*__flush_cache_all)(void);
- extern void (*flush_cache_mm)(struct mm_struct *mm);
--#define flush_cache_dup_mm(mm) do { (void) (mm); } while (0)
-+#define flush_cache_dup_mm(mm) flush_cache_mm(mm)
- extern void (*flush_cache_range)(struct vm_area_struct *vma,
- unsigned long start, unsigned long end);
- extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn);
+++ /dev/null
-From: Jeff Hansen <jhansen@cardaccess-inc.com>
-Subject: [PATCH] no highpage
-
-On ASUS WL-500gP there are many unexpected "Segmentation fault"s that
-seem to be caused by a kernel. They can be avoided by:
-1) Disabling highpage
-2) Using flush_cache_mm in flush_cache_dup_mm
-
-For details see OpenWrt ticket #2035 https://dev.openwrt.org/ticket/2035
----
---- a/arch/mips/include/asm/page.h
-+++ b/arch/mips/include/asm/page.h
-@@ -71,6 +71,7 @@ static inline unsigned int page_size_ftl
- #endif /* CONFIG_MIPS_HUGE_TLB_SUPPORT */
-
- #include <linux/pfn.h>
-+#include <asm/cpu-features.h>
-
- extern void build_clear_page(void);
- extern void build_copy_page(void);
-@@ -110,11 +111,16 @@ static inline void clear_user_page(void
- flush_data_cache_page((unsigned long)addr);
- }
-
--struct vm_area_struct;
--extern void copy_user_highpage(struct page *to, struct page *from,
-- unsigned long vaddr, struct vm_area_struct *vma);
-+static inline void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
-+ struct page *to)
-+{
-+ extern void (*flush_data_cache_page)(unsigned long addr);
-
--#define __HAVE_ARCH_COPY_USER_HIGHPAGE
-+ copy_page(vto, vfrom);
-+ if (!cpu_has_ic_fills_f_dc ||
-+ pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
-+ flush_data_cache_page((unsigned long)vto);
-+}
-
- /*
- * These are used to make use of C type-checking..
---- a/arch/mips/mm/init.c
-+++ b/arch/mips/mm/init.c
-@@ -162,30 +162,6 @@ void kunmap_coherent(void)
- preempt_enable();
- }
-
--void copy_user_highpage(struct page *to, struct page *from,
-- unsigned long vaddr, struct vm_area_struct *vma)
--{
-- void *vfrom, *vto;
--
-- vto = kmap_atomic(to);
-- if (cpu_has_dc_aliases && cpu_use_kmap_coherent &&
-- page_mapcount(from) && !Page_dcache_dirty(from)) {
-- vfrom = kmap_coherent(from, vaddr);
-- copy_page(vto, vfrom);
-- kunmap_coherent();
-- } else {
-- vfrom = kmap_atomic(from);
-- copy_page(vto, vfrom);
-- kunmap_atomic(vfrom);
-- }
-- if ((!cpu_has_ic_fills_f_dc) ||
-- pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK))
-- flush_data_cache_page((unsigned long)vto);
-- kunmap_atomic(vto);
-- /* Make sure this page is cleared on other CPU's too before using it */
-- smp_wmb();
--}
--
- void copy_to_user_page(struct vm_area_struct *vma,
- struct page *page, unsigned long vaddr, void *dst, const void *src,
- unsigned long len)
+++ /dev/null
---- a/arch/mips/bcm47xx/board.c
-+++ b/arch/mips/bcm47xx/board.c
-@@ -141,6 +141,7 @@ struct bcm47xx_board_type_list2 bcm47xx_
- {{BCM47XX_BOARD_LINKSYS_WRT300NV11, "Linksys WRT300N V1.1"}, "WRT300N", "1.1"},
- {{BCM47XX_BOARD_LINKSYS_WRT310NV1, "Linksys WRT310N V1"}, "WRT310N", "1.0"},
- {{BCM47XX_BOARD_LINKSYS_WRT310NV2, "Linksys WRT310N V2"}, "WRT310N", "2.0"},
-+ {{BCM47XX_BOARD_LINKSYS_WRT320N_V1, "Linksys WRT320N V1"}, "WRT320N", "1.0"},
- {{BCM47XX_BOARD_LINKSYS_WRT54G3GV2, "Linksys WRT54G3GV2-VF"}, "WRT54G3GV2-VF", "1.0"},
- {{BCM47XX_BOARD_LINKSYS_WRT610NV1, "Linksys WRT610N V1"}, "WRT610N", "1.0"},
- {{BCM47XX_BOARD_LINKSYS_WRT610NV2, "Linksys WRT610N V2"}, "WRT610N", "2.0"},
-@@ -161,9 +162,12 @@ struct bcm47xx_board_type_list1 bcm47xx_
- {{BCM47XX_BOARD_LUXUL_XWR_600_V1, "Luxul XWR-600 V1"}, "luxul_xwr600_v1"},
- {{BCM47XX_BOARD_LUXUL_XWR_1750_V1, "Luxul XWR-1750 V1"}, "luxul_xwr1750_v1"},
- {{BCM47XX_BOARD_NETGEAR_R6200_V1, "Netgear R6200 V1"}, "U12H192T00_NETGEAR"},
-+ {{BCM47XX_BOARD_NETGEAR_R6300_V1, "Netgear R6300 V1"}, "U12H218T00_NETGEAR"},
- {{BCM47XX_BOARD_NETGEAR_WGR614V8, "Netgear WGR614 V8"}, "U12H072T00_NETGEAR"},
- {{BCM47XX_BOARD_NETGEAR_WGR614V9, "Netgear WGR614 V9"}, "U12H094T00_NETGEAR"},
- {{BCM47XX_BOARD_NETGEAR_WGR614_V10, "Netgear WGR614 V10"}, "U12H139T01_NETGEAR"},
-+ {{BCM47XX_BOARD_NETGEAR_WN2500RP_V1, "Netgear WN2500RP V1"}, "U12H197T00_NETGEAR"},
-+ {{BCM47XX_BOARD_NETGEAR_WN2500RP_V2, "Netgear WN2500RP V2"}, "U12H294T00_NETGEAR"},
- {{BCM47XX_BOARD_NETGEAR_WNDR3300, "Netgear WNDR3300"}, "U12H093T00_NETGEAR"},
- {{BCM47XX_BOARD_NETGEAR_WNDR3400V1, "Netgear WNDR3400 V1"}, "U12H155T00_NETGEAR"},
- {{BCM47XX_BOARD_NETGEAR_WNDR3400V2, "Netgear WNDR3400 V2"}, "U12H187T00_NETGEAR"},
---- a/arch/mips/bcm47xx/buttons.c
-+++ b/arch/mips/bcm47xx/buttons.c
-@@ -27,6 +27,12 @@
- /* Asus */
-
- static const struct gpio_keys_button
-+bcm47xx_buttons_asus_rtn10u[] __initconst = {
-+ BCM47XX_GPIO_KEY(20, KEY_WPS_BUTTON),
-+ BCM47XX_GPIO_KEY(21, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
- bcm47xx_buttons_asus_rtn12[] __initconst = {
- BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON),
- BCM47XX_GPIO_KEY(1, KEY_RESTART),
-@@ -277,6 +283,18 @@ bcm47xx_buttons_linksys_wrt310nv1[] __in
- };
-
- static const struct gpio_keys_button
-+bcm47xx_buttons_linksys_wrt310n_v2[] __initconst = {
-+ BCM47XX_GPIO_KEY(5, KEY_WPS_BUTTON),
-+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_linksys_wrt320n_v1[] __initconst = {
-+ BCM47XX_GPIO_KEY(5, KEY_WPS_BUTTON),
-+ BCM47XX_GPIO_KEY(8, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
- bcm47xx_buttons_linksys_wrt54g3gv2[] __initconst = {
- BCM47XX_GPIO_KEY(5, KEY_WIMAX),
- BCM47XX_GPIO_KEY(6, KEY_RESTART),
-@@ -392,6 +410,17 @@ bcm47xx_buttons_netgear_r6200_v1[] __ini
- };
-
- static const struct gpio_keys_button
-+bcm47xx_buttons_netgear_r6300_v1[] __initconst = {
-+ BCM47XX_GPIO_KEY(6, KEY_RESTART),
-+};
-+
-+static const struct gpio_keys_button
-+bcm47xx_buttons_netgear_wn2500rp_v1[] __initconst = {
-+ BCM47XX_GPIO_KEY(12, KEY_RESTART),
-+ BCM47XX_GPIO_KEY(31, KEY_WPS_BUTTON),
-+};
-+
-+static const struct gpio_keys_button
- bcm47xx_buttons_netgear_wndr3400v1[] __initconst = {
- BCM47XX_GPIO_KEY(4, KEY_RESTART),
- BCM47XX_GPIO_KEY(6, KEY_WPS_BUTTON),
-@@ -478,6 +507,9 @@ int __init bcm47xx_buttons_register(void
- int err;
-
- switch (board) {
-+ case BCM47XX_BOARD_ASUS_RTN10U:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn10u);
-+ break;
- case BCM47XX_BOARD_ASUS_RTN12:
- err = bcm47xx_copy_bdata(bcm47xx_buttons_asus_rtn12);
- break;
-@@ -608,6 +640,12 @@ int __init bcm47xx_buttons_register(void
- case BCM47XX_BOARD_LINKSYS_WRT310NV1:
- err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt310nv1);
- break;
-+ case BCM47XX_BOARD_LINKSYS_WRT310NV2:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt310n_v2);
-+ break;
-+ case BCM47XX_BOARD_LINKSYS_WRT320N_V1:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt320n_v1);
-+ break;
- case BCM47XX_BOARD_LINKSYS_WRT54G3GV2:
- err = bcm47xx_copy_bdata(bcm47xx_buttons_linksys_wrt54g3gv2);
- break;
-@@ -674,6 +712,12 @@ int __init bcm47xx_buttons_register(void
- case BCM47XX_BOARD_NETGEAR_R6200_V1:
- err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_r6200_v1);
- break;
-+ case BCM47XX_BOARD_NETGEAR_R6300_V1:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_r6300_v1);
-+ break;
-+ case BCM47XX_BOARD_NETGEAR_WN2500RP_V1:
-+ err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wn2500rp_v1);
-+ break;
- case BCM47XX_BOARD_NETGEAR_WNDR3400V1:
- err = bcm47xx_copy_bdata(bcm47xx_buttons_netgear_wndr3400v1);
- break;
---- a/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-+++ b/arch/mips/include/asm/mach-bcm47xx/bcm47xx_board.h
-@@ -72,6 +72,7 @@ enum bcm47xx_board {
- BCM47XX_BOARD_LINKSYS_WRT300NV11,
- BCM47XX_BOARD_LINKSYS_WRT310NV1,
- BCM47XX_BOARD_LINKSYS_WRT310NV2,
-+ BCM47XX_BOARD_LINKSYS_WRT320N_V1,
- BCM47XX_BOARD_LINKSYS_WRT54G3GV2,
- BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0101,
- BCM47XX_BOARD_LINKSYS_WRT54G_TYPE_0467,
-@@ -99,9 +100,12 @@ enum bcm47xx_board {
- BCM47XX_BOARD_MOTOROLA_WR850GV2V3,
-
- BCM47XX_BOARD_NETGEAR_R6200_V1,
-+ BCM47XX_BOARD_NETGEAR_R6300_V1,
- BCM47XX_BOARD_NETGEAR_WGR614V8,
- BCM47XX_BOARD_NETGEAR_WGR614V9,
- BCM47XX_BOARD_NETGEAR_WGR614_V10,
-+ BCM47XX_BOARD_NETGEAR_WN2500RP_V1,
-+ BCM47XX_BOARD_NETGEAR_WN2500RP_V2,
- BCM47XX_BOARD_NETGEAR_WNDR3300,
- BCM47XX_BOARD_NETGEAR_WNDR3400V1,
- BCM47XX_BOARD_NETGEAR_WNDR3400V2,
---- a/arch/mips/bcm47xx/leds.c
-+++ b/arch/mips/bcm47xx/leds.c
-@@ -30,6 +30,14 @@
- /* Asus */
-
- static const struct gpio_led
-+bcm47xx_leds_asus_rtn10u[] __initconst = {
-+ BCM47XX_GPIO_LED(5, "green", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(6, "green", "power", 1, LEDS_GPIO_DEFSTATE_ON),
-+ BCM47XX_GPIO_LED(7, "green", "wps", 0, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(8, "green", "usb", 0, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
- bcm47xx_leds_asus_rtn12[] __initconst = {
- BCM47XX_GPIO_LED(2, "unk", "power", 1, LEDS_GPIO_DEFSTATE_ON),
- BCM47XX_GPIO_LED(7, "unk", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
-@@ -314,6 +322,13 @@ bcm47xx_leds_linksys_wrt310nv1[] __initc
- };
-
- static const struct gpio_led
-+bcm47xx_leds_linksys_wrt320n_v1[] __initconst = {
-+ BCM47XX_GPIO_LED(1, "blue", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
-+ BCM47XX_GPIO_LED(2, "blue", "power", 0, LEDS_GPIO_DEFSTATE_ON),
-+ BCM47XX_GPIO_LED(4, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF),
-+};
-+
-+static const struct gpio_led
- bcm47xx_leds_linksys_wrt54g_generic[] __initconst = {
- BCM47XX_GPIO_LED(0, "unk", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
- BCM47XX_GPIO_LED(1, "unk", "power", 0, LEDS_GPIO_DEFSTATE_ON),
-@@ -556,6 +571,9 @@ void __init bcm47xx_leds_register(void)
- enum bcm47xx_board board = bcm47xx_board_get();
-
- switch (board) {
-+ case BCM47XX_BOARD_ASUS_RTN10U:
-+ bcm47xx_set_pdata(bcm47xx_leds_asus_rtn10u);
-+ break;
- case BCM47XX_BOARD_ASUS_RTN12:
- bcm47xx_set_pdata(bcm47xx_leds_asus_rtn12);
- break;
-@@ -689,6 +707,9 @@ void __init bcm47xx_leds_register(void)
- case BCM47XX_BOARD_LINKSYS_WRT310NV1:
- bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt310nv1);
- break;
-+ case BCM47XX_BOARD_LINKSYS_WRT320N_V1:
-+ bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt320n_v1);
-+ break;
- case BCM47XX_BOARD_LINKSYS_WRT54G3GV2:
- bcm47xx_set_pdata(bcm47xx_leds_linksys_wrt54g3gv2);
- break;
+++ /dev/null
---- a/drivers/mtd/bcm47xxpart.c
-+++ b/drivers/mtd/bcm47xxpart.c
-@@ -102,6 +102,7 @@ static int bcm47xxpart_parse(struct mtd_
- int trx_num = 0; /* Number of found TRX partitions */
- int possible_nvram_sizes[] = { 0x8000, 0xF000, 0x10000, };
- int err;
-+ bool found_nvram = false;
-
- /*
- * Some really old flashes (like AT45DB*) had smaller erasesize-s, but
-@@ -283,12 +284,23 @@ static int bcm47xxpart_parse(struct mtd_
- if (buf[0] == NVRAM_HEADER) {
- bcm47xxpart_add_part(&parts[curr_part++], "nvram",
- master->size - blocksize, 0);
-+ found_nvram = true;
- break;
- }
- }
-
- kfree(buf);
-
-+ if (!found_nvram) {
-+ pr_err("can not find a nvram partition reserve last block\n");
-+ bcm47xxpart_add_part(&parts[curr_part++], "nvram_guess",
-+ master->size - blocksize * 2, MTD_WRITEABLE);
-+ for (i = 0; i < curr_part; i++) {
-+ if (parts[i].size + parts[i].offset == master->size)
-+ parts[i].offset -= blocksize * 2;
-+ }
-+ }
-+
- /*
- * Assume that partitions end at the beginning of the one they are
- * followed by.
+++ /dev/null
-From: b.sander
-Subject: [PATCH] pci: IDE fix
-
-These are standard probing messages when using pdc202xx_old:
-pdc202xx_old 0000:00:01.0: IDE controller (0x105a:0x0d30 rev 0x02)
-PCI: Enabling device 0000:00:01.0 (0004 -> 0007)
-PCI: Fixing up device 0000:00:01.0
-0000:00:01.0: (U)DMA Burst Bit DISABLED Primary PCI Mode Secondary PCI Mode.
-0000:00:01.0: FORCING BURST BIT 0x00->0x01 ACTIVE
-pdc202xx_old 0000:00:01.0: 100% native mode on irq 6
-
-With the default MAX_HWIFS value after above we get:
- ide2: BM-DMA at 0x0400-0x0407
- ide3: BM-DMA at 0x0408-0x040f
-Probing IDE interface ide2...
-hde: CF500, CFA DISK drive
-
-As you can see it's ide2 + ide3 and hde.
-
-With this patch applied we get:
- ide0: BM-DMA at 0x0400-0x0407
- ide1: BM-DMA at 0x0408-0x040f
-Probing IDE interface ide0...
-hda: CF500, CFA DISK drive
-
-This fixes OpenWrt ticket #7061: https://dev.openwrt.org/ticket/7061
----
---- a/include/linux/ide.h
-+++ b/include/linux/ide.h
-@@ -235,7 +235,11 @@ static inline void ide_std_init_ports(st
- hw->io_ports.ctl_addr = ctl_addr;
- }
-
-+#if defined CONFIG_BCM47XX
-+# define MAX_HWIFS 2
-+#else
- #define MAX_HWIFS 10
-+#endif
-
- /*
- * Now for the data we need to maintain per-drive: ide_drive_t
+++ /dev/null
-When the Ethernet controller is powered down and someone wants to
-access the mdio bus like the witch driver (b53) the system crashed if
-PCI_D3hot was set before. This patch deactivates this power sawing mode
-when a switch driver is in use.
-
---- a/drivers/net/ethernet/broadcom/tg3.c
-+++ b/drivers/net/ethernet/broadcom/tg3.c
-@@ -4279,7 +4279,8 @@ static int tg3_power_down_prepare(struct
- static void tg3_power_down(struct tg3 *tp)
- {
- pci_wake_from_d3(tp->pdev, tg3_flag(tp, WOL_ENABLE));
-- pci_set_power_state(tp->pdev, PCI_D3hot);
-+ if (!tg3_flag(tp, ROBOSWITCH))
-+ pci_set_power_state(tp->pdev, PCI_D3hot);
- }
-
- static void tg3_aux_stat_to_speed_duplex(struct tg3 *tp, u32 val, u16 *speed, u8 *duplex)
+++ /dev/null
-From 597715c61ae75a05ab3310a34ff3857a006f0f63 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 20 Nov 2014 21:32:42 +0100
-Subject: [PATCH] bcma: add table of serial flashes with smaller blocks
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/bcma/driver_chipcommon_sflash.c | 29 +++++++++++++++++++++++++++++
- 1 file changed, 29 insertions(+)
-
---- a/drivers/bcma/driver_chipcommon_sflash.c
-+++ b/drivers/bcma/driver_chipcommon_sflash.c
-@@ -9,6 +9,7 @@
-
- #include <linux/platform_device.h>
- #include <linux/bcma/bcma.h>
-+#include <bcm47xx_board.h>
-
- static struct resource bcma_sflash_resource = {
- .name = "bcma_sflash",
-@@ -42,6 +43,13 @@ static const struct bcma_sflash_tbl_e bc
- { NULL },
- };
-
-+/* Some devices use smaller blocks (and have more of them) */
-+static const struct bcma_sflash_tbl_e bcma_sflash_st_shrink_tbl[] = {
-+ { "M25P16", 0x14, 0x1000, 512, },
-+ { "M25P32", 0x15, 0x1000, 1024, },
-+ { NULL },
-+};
-+
- static const struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
- { "SST25WF512", 1, 0x1000, 16, },
- { "SST25VF512", 0x48, 0x1000, 16, },
-@@ -85,6 +93,24 @@ static void bcma_sflash_cmd(struct bcma_
- bcma_err(cc->core->bus, "SFLASH control command failed (timeout)!\n");
- }
-
-+const struct bcma_sflash_tbl_e *bcma_sflash_shrink_flash(u32 id)
-+{
-+ enum bcm47xx_board board = bcm47xx_board_get();
-+ const struct bcma_sflash_tbl_e *e;
-+
-+ switch (board) {
-+ case BCM47XX_BOARD_NETGEAR_WGR614_V10:
-+ case BCM47XX_BOARD_NETGEAR_WNR1000_V3:
-+ for (e = bcma_sflash_st_shrink_tbl; e->name; e++) {
-+ if (e->id == id)
-+ return e;
-+ }
-+ return NULL;
-+ default:
-+ return NULL;
-+ }
-+}
-+
- /* Initialize serial flash access */
- int bcma_sflash_init(struct bcma_drv_cc *cc)
- {
-@@ -115,6 +141,10 @@ int bcma_sflash_init(struct bcma_drv_cc
- case 0x13:
- return -ENOTSUPP;
- default:
-+ e = bcma_sflash_shrink_flash(id);
-+ if (e)
-+ break;
-+
- for (e = bcma_sflash_st_tbl; e->name; e++) {
- if (e->id == id)
- break;
+++ /dev/null
-The Netgear wgt634u uses a different format for storing the
-configuration. This patch is needed to read out the correct
-configuration. The cfe_env.c file uses a different method way to read
-out the configuration than the in kernel cfe config reader.
-
---- a/drivers/firmware/broadcom/Makefile
-+++ b/drivers/firmware/broadcom/Makefile
-@@ -1,2 +1,2 @@
--obj-$(CONFIG_BCM47XX_NVRAM) += bcm47xx_nvram.o
-+obj-$(CONFIG_BCM47XX_NVRAM) += bcm47xx_nvram.o cfe_env.o
- obj-$(CONFIG_BCM47XX_SPROM) += bcm47xx_sprom.o
---- /dev/null
-+++ b/drivers/firmware/broadcom/cfe_env.c
-@@ -0,0 +1,228 @@
-+/*
-+ * CFE environment variable access
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * Copyright 2006, Felix Fietkau <nbd@nbd.name>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation; either version 2 of the License, or (at your
-+ * option) any later version.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <asm/io.h>
-+#include <linux/uaccess.h>
-+
-+#define NVRAM_SIZE (0x1ff0)
-+static char _nvdata[NVRAM_SIZE];
-+static char _valuestr[256];
-+
-+/*
-+ * TLV types. These codes are used in the "type-length-value"
-+ * encoding of the items stored in the NVRAM device (flash or EEPROM)
-+ *
-+ * The layout of the flash/nvram is as follows:
-+ *
-+ * <type> <length> <data ...> <type> <length> <data ...> <type_end>
-+ *
-+ * The type code of "ENV_TLV_TYPE_END" marks the end of the list.
-+ * The "length" field marks the length of the data section, not
-+ * including the type and length fields.
-+ *
-+ * Environment variables are stored as follows:
-+ *
-+ * <type_env> <length> <flags> <name> = <value>
-+ *
-+ * If bit 0 (low bit) is set, the length is an 8-bit value.
-+ * If bit 0 (low bit) is clear, the length is a 16-bit value
-+ *
-+ * Bit 7 set indicates "user" TLVs. In this case, bit 0 still
-+ * indicates the size of the length field.
-+ *
-+ * Flags are from the constants below:
-+ *
-+ */
-+#define ENV_LENGTH_16BITS 0x00 /* for low bit */
-+#define ENV_LENGTH_8BITS 0x01
-+
-+#define ENV_TYPE_USER 0x80
-+
-+#define ENV_CODE_SYS(n,l) (((n)<<1)|(l))
-+#define ENV_CODE_USER(n,l) ((((n)<<1)|(l)) | ENV_TYPE_USER)
-+
-+/*
-+ * The actual TLV types we support
-+ */
-+
-+#define ENV_TLV_TYPE_END 0x00
-+#define ENV_TLV_TYPE_ENV ENV_CODE_SYS(0,ENV_LENGTH_8BITS)
-+
-+/*
-+ * Environment variable flags
-+ */
-+
-+#define ENV_FLG_NORMAL 0x00 /* normal read/write */
-+#define ENV_FLG_BUILTIN 0x01 /* builtin - not stored in flash */
-+#define ENV_FLG_READONLY 0x02 /* read-only - cannot be changed */
-+
-+#define ENV_FLG_MASK 0xFF /* mask of attributes we keep */
-+#define ENV_FLG_ADMIN 0x100 /* lets us internally override permissions */
-+
-+
-+/* *********************************************************************
-+ * _nvram_read(buffer,offset,length)
-+ *
-+ * Read data from the NVRAM device
-+ *
-+ * Input parameters:
-+ * buffer - destination buffer
-+ * offset - offset of data to read
-+ * length - number of bytes to read
-+ *
-+ * Return value:
-+ * number of bytes read, or <0 if error occured
-+ ********************************************************************* */
-+static int
-+_nvram_read(unsigned char *nv_buf, unsigned char *buffer, int offset, int length)
-+{
-+ int i;
-+ if (offset > NVRAM_SIZE)
-+ return -1;
-+
-+ for ( i = 0; i < length; i++) {
-+ buffer[i] = ((volatile unsigned char*)nv_buf)[offset + i];
-+ }
-+ return length;
-+}
-+
-+
-+static char*
-+_strnchr(const char *dest,int c,size_t cnt)
-+{
-+ while (*dest && (cnt > 0)) {
-+ if (*dest == c) return (char *) dest;
-+ dest++;
-+ cnt--;
-+ }
-+ return NULL;
-+}
-+
-+
-+
-+/*
-+ * Core support API: Externally visible.
-+ */
-+
-+/*
-+ * Get the value of an NVRAM variable
-+ * @param name name of variable to get
-+ * @return value of variable or NULL if undefined
-+ */
-+
-+char *cfe_env_get(unsigned char *nv_buf, const char *name)
-+{
-+ int size;
-+ unsigned char *buffer;
-+ unsigned char *ptr;
-+ unsigned char *envval;
-+ unsigned int reclen;
-+ unsigned int rectype;
-+ int offset;
-+ int flg;
-+
-+ if (!strcmp(name, "nvram_type"))
-+ return "cfe";
-+
-+ size = NVRAM_SIZE;
-+ buffer = &_nvdata[0];
-+
-+ ptr = buffer;
-+ offset = 0;
-+
-+ /* Read the record type and length */
-+ if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
-+ goto error;
-+ }
-+
-+ while ((*ptr != ENV_TLV_TYPE_END) && (size > 1)) {
-+
-+ /* Adjust pointer for TLV type */
-+ rectype = *(ptr);
-+ offset++;
-+ size--;
-+
-+ /*
-+ * Read the length. It can be either 1 or 2 bytes
-+ * depending on the code
-+ */
-+ if (rectype & ENV_LENGTH_8BITS) {
-+ /* Read the record type and length - 8 bits */
-+ if (_nvram_read(nv_buf, ptr,offset,1) != 1) {
-+ goto error;
-+ }
-+ reclen = *(ptr);
-+ size--;
-+ offset++;
-+ }
-+ else {
-+ /* Read the record type and length - 16 bits, MSB first */
-+ if (_nvram_read(nv_buf, ptr,offset,2) != 2) {
-+ goto error;
-+ }
-+ reclen = (((unsigned int) *(ptr)) << 8) + (unsigned int) *(ptr+1);
-+ size -= 2;
-+ offset += 2;
-+ }
-+
-+ if (reclen > size)
-+ break; /* should not happen, bad NVRAM */
-+
-+ switch (rectype) {
-+ case ENV_TLV_TYPE_ENV:
-+ /* Read the TLV data */
-+ if (_nvram_read(nv_buf, ptr,offset,reclen) != reclen)
-+ goto error;
-+ flg = *ptr++;
-+ envval = (unsigned char *) _strnchr(ptr,'=',(reclen-1));
-+ if (envval) {
-+ *envval++ = '\0';
-+ memcpy(_valuestr,envval,(reclen-1)-(envval-ptr));
-+ _valuestr[(reclen-1)-(envval-ptr)] = '\0';
-+#if 0
-+ printk(KERN_INFO "NVRAM:%s=%s\n", ptr, _valuestr);
-+#endif
-+ if(!strcmp(ptr, name)){
-+ return _valuestr;
-+ }
-+ if((strlen(ptr) > 1) && !strcmp(&ptr[1], name))
-+ return _valuestr;
-+ }
-+ break;
-+
-+ default:
-+ /* Unknown TLV type, skip it. */
-+ break;
-+ }
-+
-+ /*
-+ * Advance to next TLV
-+ */
-+
-+ size -= (int)reclen;
-+ offset += reclen;
-+
-+ /* Read the next record type */
-+ ptr = buffer;
-+ if (_nvram_read(nv_buf, ptr,offset,1) != 1)
-+ goto error;
-+ }
-+
-+error:
-+ return NULL;
-+
-+}
-+
---- a/drivers/firmware/broadcom/bcm47xx_nvram.c
-+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
-@@ -37,6 +37,8 @@ struct nvram_header {
- static char nvram_buf[NVRAM_SPACE];
- static size_t nvram_len;
- static const u32 nvram_sizes[] = {0x6000, 0x8000, 0xF000, 0x10000};
-+static int cfe_env;
-+extern char *cfe_env_get(char *nv_buf, const char *name);
-
- static u32 find_nvram_size(void __iomem *end)
- {
-@@ -56,7 +58,9 @@ static u32 find_nvram_size(void __iomem
- static int nvram_find_and_copy(void __iomem *iobase, u32 lim)
- {
- struct nvram_header __iomem *header;
-+ int i;
- u32 off;
-+ u32 *src, *dst;
- u32 size;
-
- if (nvram_len) {
-@@ -64,6 +68,26 @@ static int nvram_find_and_copy(void __io
- return -EEXIST;
- }
-
-+ cfe_env = 0;
-+
-+ /* XXX: hack for supporting the CFE environment stuff on WGT634U */
-+ if (lim >= 8 * 1024 * 1024) {
-+ src = (u32 *)(iobase + 8 * 1024 * 1024 - 0x2000);
-+ dst = (u32 *)nvram_buf;
-+
-+ if ((*src & 0xff00ff) == 0x000001) {
-+ printk("early_nvram_init: WGT634U NVRAM found.\n");
-+
-+ for (i = 0; i < 0x1ff0; i++) {
-+ if (*src == 0xFFFFFFFF)
-+ break;
-+ *dst++ = *src++;
-+ }
-+ cfe_env = 1;
-+ return 0;
-+ }
-+ }
-+
- /* TODO: when nvram is on nand flash check for bad blocks first. */
- off = FLASH_MIN;
- while (off <= lim) {
-@@ -174,6 +198,13 @@ int bcm47xx_nvram_getenv(const char *nam
- if (!name)
- return -EINVAL;
-
-+ if (cfe_env) {
-+ value = cfe_env_get(nvram_buf, name);
-+ if (!value)
-+ return -ENOENT;
-+ return snprintf(val, val_len, "%s", value);
-+ }
-+
- if (!nvram_len) {
- err = nvram_init();
- if (err)
+++ /dev/null
---- a/arch/mips/bcm47xx/setup.c
-+++ b/arch/mips/bcm47xx/setup.c
-@@ -37,6 +37,7 @@
- #include <linux/ssb/ssb.h>
- #include <linux/ssb/ssb_embedded.h>
- #include <linux/bcma/bcma_soc.h>
-+#include <linux/old_gpio_wdt.h>
- #include <asm/bootinfo.h>
- #include <asm/idle.h>
- #include <asm/prom.h>
-@@ -254,6 +255,33 @@ static struct fixed_phy_status bcm47xx_f
- .duplex = DUPLEX_FULL,
- };
-
-+static struct gpio_wdt_platform_data gpio_wdt_data;
-+
-+static struct platform_device gpio_wdt_device = {
-+ .name = "gpio-wdt",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &gpio_wdt_data,
-+ },
-+};
-+
-+static int __init bcm47xx_register_gpio_watchdog(void)
-+{
-+ enum bcm47xx_board board = bcm47xx_board_get();
-+
-+ switch (board) {
-+ case BCM47XX_BOARD_HUAWEI_E970:
-+ pr_info("bcm47xx: detected Huawei E970 or similar, starting early gpio_wdt timer\n");
-+ gpio_wdt_data.gpio = 7;
-+ gpio_wdt_data.interval = HZ;
-+ gpio_wdt_data.first_interval = HZ / 5;
-+ return platform_device_register(&gpio_wdt_device);
-+ default:
-+ /* Nothing to do */
-+ return 0;
-+ }
-+}
-+
- static int __init bcm47xx_register_bus_complete(void)
- {
- switch (bcm47xx_bus_type) {
-@@ -275,6 +303,7 @@ static int __init bcm47xx_register_bus_c
- bcm47xx_workarounds();
-
- fixed_phy_add(PHY_POLL, 0, &bcm47xx_fixed_phy_status, -1);
-+ bcm47xx_register_gpio_watchdog();
- return 0;
- }
- device_initcall(bcm47xx_register_bus_complete);
---- a/arch/mips/configs/bcm47xx_defconfig
-+++ b/arch/mips/configs/bcm47xx_defconfig
-@@ -66,6 +66,7 @@ CONFIG_HW_RANDOM=y
- CONFIG_GPIO_SYSFS=y
- CONFIG_WATCHDOG=y
- CONFIG_BCM47XX_WDT=y
-+CONFIG_GPIO_WDT=y
- CONFIG_SSB_DRIVER_GIGE=y
- CONFIG_BCMA_DRIVER_GMAC_CMN=y
- CONFIG_USB=y
---- a/drivers/ssb/embedded.c
-+++ b/drivers/ssb/embedded.c
-@@ -34,11 +34,36 @@ int ssb_watchdog_timer_set(struct ssb_bu
- }
- EXPORT_SYMBOL(ssb_watchdog_timer_set);
-
-+#ifdef CONFIG_BCM47XX
-+#include <bcm47xx_board.h>
-+
-+static bool ssb_watchdog_supported(void)
-+{
-+ enum bcm47xx_board board = bcm47xx_board_get();
-+
-+ /* The Huawei E970 has a hardware watchdog using a GPIO */
-+ switch (board) {
-+ case BCM47XX_BOARD_HUAWEI_E970:
-+ return false;
-+ default:
-+ return true;
-+ }
-+}
-+#else
-+static bool ssb_watchdog_supported(void)
-+{
-+ return true;
-+}
-+#endif
-+
- int ssb_watchdog_register(struct ssb_bus *bus)
- {
- struct bcm47xx_wdt wdt = {};
- struct platform_device *pdev;
-
-+ if (!ssb_watchdog_supported())
-+ return 0;
-+
- if (ssb_chipco_available(&bus->chipco)) {
- wdt.driver_data = &bus->chipco;
- wdt.timer_set = ssb_chipco_watchdog_timer_set_wdt;
+++ /dev/null
-This generic GPIO watchdog is used on Huawei E970 (bcm47xx)
-
-Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de>
-
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -1498,6 +1498,15 @@ config WDT_MTX1
- Hardware driver for the MTX-1 boards. This is a watchdog timer that
- will reboot the machine after a 100 seconds timer expired.
-
-+config GPIO_WDT
-+ tristate "GPIO Hardware Watchdog"
-+ help
-+ Hardware driver for GPIO-controlled watchdogs. GPIO pin and
-+ toggle interval settings are platform-specific. The driver
-+ will stop toggling the GPIO (i.e. machine reboots) after a
-+ 100 second timer expired and no process has written to
-+ /dev/watchdog during that time.
-+
- config PNX833X_WDT
- tristate "PNX833x Hardware Watchdog"
- depends on SOC_PNX8335
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -154,6 +154,7 @@ obj-$(CONFIG_RC32434_WDT) += rc32434_wdt
- obj-$(CONFIG_INDYDOG) += indydog.o
- obj-$(CONFIG_JZ4740_WDT) += jz4740_wdt.o
- obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
-+obj-$(CONFIG_GPIO_WDT) += old_gpio_wdt.o
- obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o
- obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
- obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
---- /dev/null
-+++ b/drivers/watchdog/old_gpio_wdt.c
-@@ -0,0 +1,301 @@
-+/*
-+ * Driver for GPIO-controlled Hardware Watchdogs.
-+ *
-+ * Copyright (C) 2013 Mathias Adam <m.adam--linux@adamis.de>
-+ *
-+ * Replaces mtx1_wdt (driver for the MTX-1 Watchdog):
-+ *
-+ * (C) Copyright 2005 4G Systems <info@4g-systems.biz>,
-+ * All Rights Reserved.
-+ * http://www.4g-systems.biz
-+ *
-+ * (C) Copyright 2007 OpenWrt.org, Florian Fainelli <florian@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version
-+ * 2 of the License, or (at your option) any later version.
-+ *
-+ * Neither Michael Stickel nor 4G Systems admit liability nor provide
-+ * warranty for any of this software. This material is provided
-+ * "AS-IS" and at no charge.
-+ *
-+ * (c) Copyright 2005 4G Systems <info@4g-systems.biz>
-+ *
-+ * Release 0.01.
-+ * Author: Michael Stickel michael.stickel@4g-systems.biz
-+ *
-+ * Release 0.02.
-+ * Author: Florian Fainelli florian@openwrt.org
-+ * use the Linux watchdog/timer APIs
-+ *
-+ * Release 0.03.
-+ * Author: Mathias Adam <m.adam--linux@adamis.de>
-+ * make it a generic gpio watchdog driver
-+ *
-+ * The Watchdog is configured to reset the MTX-1
-+ * if it is not triggered for 100 seconds.
-+ * It should not be triggered more often than 1.6 seconds.
-+ *
-+ * A timer triggers the watchdog every 5 seconds, until
-+ * it is opened for the first time. After the first open
-+ * it MUST be triggered every 2..95 seconds.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/types.h>
-+#include <linux/errno.h>
-+#include <linux/miscdevice.h>
-+#include <linux/fs.h>
-+#include <linux/init.h>
-+#include <linux/ioport.h>
-+#include <linux/timer.h>
-+#include <linux/completion.h>
-+#include <linux/jiffies.h>
-+#include <linux/watchdog.h>
-+#include <linux/platform_device.h>
-+#include <linux/io.h>
-+#include <linux/uaccess.h>
-+#include <linux/gpio.h>
-+#include <linux/old_gpio_wdt.h>
-+
-+static int ticks = 100 * HZ;
-+
-+static struct {
-+ struct completion stop;
-+ spinlock_t lock;
-+ int running;
-+ struct timer_list timer;
-+ int queue;
-+ int default_ticks;
-+ unsigned long inuse;
-+ unsigned gpio;
-+ unsigned int gstate;
-+ int interval;
-+ int first_interval;
-+} gpio_wdt_device;
-+
-+static void gpio_wdt_trigger(struct timer_list *unused)
-+{
-+ spin_lock(&gpio_wdt_device.lock);
-+ if (gpio_wdt_device.running && ticks > 0)
-+ ticks -= gpio_wdt_device.interval;
-+
-+ /* toggle wdt gpio */
-+ gpio_wdt_device.gstate = !gpio_wdt_device.gstate;
-+ gpio_set_value(gpio_wdt_device.gpio, gpio_wdt_device.gstate);
-+
-+ if (gpio_wdt_device.queue && ticks > 0)
-+ mod_timer(&gpio_wdt_device.timer, jiffies + gpio_wdt_device.interval);
-+ else
-+ complete(&gpio_wdt_device.stop);
-+ spin_unlock(&gpio_wdt_device.lock);
-+}
-+
-+static void gpio_wdt_reset(void)
-+{
-+ ticks = gpio_wdt_device.default_ticks;
-+}
-+
-+
-+static void gpio_wdt_start(void)
-+{
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&gpio_wdt_device.lock, flags);
-+ if (!gpio_wdt_device.queue) {
-+ gpio_wdt_device.queue = 1;
-+ gpio_wdt_device.gstate = 1;
-+ gpio_set_value(gpio_wdt_device.gpio, 1);
-+ mod_timer(&gpio_wdt_device.timer, jiffies + gpio_wdt_device.first_interval);
-+ }
-+ gpio_wdt_device.running++;
-+ spin_unlock_irqrestore(&gpio_wdt_device.lock, flags);
-+}
-+
-+static int gpio_wdt_stop(void)
-+{
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&gpio_wdt_device.lock, flags);
-+ if (gpio_wdt_device.queue) {
-+ gpio_wdt_device.queue = 0;
-+ gpio_wdt_device.gstate = 0;
-+ gpio_set_value(gpio_wdt_device.gpio, 0);
-+ }
-+ ticks = gpio_wdt_device.default_ticks;
-+ spin_unlock_irqrestore(&gpio_wdt_device.lock, flags);
-+ return 0;
-+}
-+
-+/* Filesystem functions */
-+
-+static int gpio_wdt_open(struct inode *inode, struct file *file)
-+{
-+ if (test_and_set_bit(0, &gpio_wdt_device.inuse))
-+ return -EBUSY;
-+ return nonseekable_open(inode, file);
-+}
-+
-+
-+static int gpio_wdt_release(struct inode *inode, struct file *file)
-+{
-+ clear_bit(0, &gpio_wdt_device.inuse);
-+ return 0;
-+}
-+
-+static long gpio_wdt_ioctl(struct file *file, unsigned int cmd,
-+ unsigned long arg)
-+{
-+ void __user *argp = (void __user *)arg;
-+ int __user *p = (int __user *)argp;
-+ unsigned int value;
-+ static const struct watchdog_info ident = {
-+ .options = WDIOF_CARDRESET,
-+ .identity = "GPIO WDT",
-+ };
-+
-+ switch (cmd) {
-+ case WDIOC_GETSUPPORT:
-+ if (copy_to_user(argp, &ident, sizeof(ident)))
-+ return -EFAULT;
-+ break;
-+ case WDIOC_GETSTATUS:
-+ case WDIOC_GETBOOTSTATUS:
-+ put_user(0, p);
-+ break;
-+ case WDIOC_SETOPTIONS:
-+ if (get_user(value, p))
-+ return -EFAULT;
-+ if (value & WDIOS_ENABLECARD)
-+ gpio_wdt_start();
-+ else if (value & WDIOS_DISABLECARD)
-+ gpio_wdt_stop();
-+ else
-+ return -EINVAL;
-+ return 0;
-+ case WDIOC_KEEPALIVE:
-+ gpio_wdt_reset();
-+ break;
-+ default:
-+ return -ENOTTY;
-+ }
-+ return 0;
-+}
-+
-+
-+static ssize_t gpio_wdt_write(struct file *file, const char *buf,
-+ size_t count, loff_t *ppos)
-+{
-+ if (!count)
-+ return -EIO;
-+ gpio_wdt_reset();
-+ return count;
-+}
-+
-+static const struct file_operations gpio_wdt_fops = {
-+ .owner = THIS_MODULE,
-+ .llseek = no_llseek,
-+ .unlocked_ioctl = gpio_wdt_ioctl,
-+ .open = gpio_wdt_open,
-+ .write = gpio_wdt_write,
-+ .release = gpio_wdt_release,
-+};
-+
-+
-+static struct miscdevice gpio_wdt_misc = {
-+ .minor = WATCHDOG_MINOR,
-+ .name = "watchdog",
-+ .fops = &gpio_wdt_fops,
-+};
-+
-+
-+static int gpio_wdt_probe(struct platform_device *pdev)
-+{
-+ int ret;
-+ struct gpio_wdt_platform_data *gpio_wdt_data = pdev->dev.platform_data;
-+
-+ gpio_wdt_device.gpio = gpio_wdt_data->gpio;
-+ gpio_wdt_device.interval = gpio_wdt_data->interval;
-+ gpio_wdt_device.first_interval = gpio_wdt_data->first_interval;
-+ if (gpio_wdt_device.first_interval <= 0) {
-+ gpio_wdt_device.first_interval = gpio_wdt_device.interval;
-+ }
-+
-+ ret = gpio_request(gpio_wdt_device.gpio, "gpio-wdt");
-+ if (ret < 0) {
-+ dev_err(&pdev->dev, "failed to request gpio");
-+ return ret;
-+ }
-+
-+ spin_lock_init(&gpio_wdt_device.lock);
-+ init_completion(&gpio_wdt_device.stop);
-+ gpio_wdt_device.queue = 0;
-+ clear_bit(0, &gpio_wdt_device.inuse);
-+ timer_setup(&gpio_wdt_device.timer, gpio_wdt_trigger, 0L);
-+ gpio_wdt_device.default_ticks = ticks;
-+
-+ gpio_wdt_start();
-+ dev_info(&pdev->dev, "GPIO Hardware Watchdog driver (gpio=%i interval=%i/%i)\n",
-+ gpio_wdt_data->gpio, gpio_wdt_data->first_interval, gpio_wdt_data->interval);
-+ return 0;
-+}
-+
-+static int gpio_wdt_remove(struct platform_device *pdev)
-+{
-+ /* FIXME: do we need to lock this test ? */
-+ if (gpio_wdt_device.queue) {
-+ gpio_wdt_device.queue = 0;
-+ wait_for_completion(&gpio_wdt_device.stop);
-+ }
-+
-+ gpio_free(gpio_wdt_device.gpio);
-+ misc_deregister(&gpio_wdt_misc);
-+ return 0;
-+}
-+
-+static struct platform_driver gpio_wdt_driver = {
-+ .probe = gpio_wdt_probe,
-+ .remove = gpio_wdt_remove,
-+ .driver.name = "gpio-wdt",
-+ .driver.owner = THIS_MODULE,
-+};
-+
-+static int __init gpio_wdt_init(void)
-+{
-+ return platform_driver_register(&gpio_wdt_driver);
-+}
-+arch_initcall(gpio_wdt_init);
-+
-+/*
-+ * We do wdt initialization in two steps: arch_initcall probes the wdt
-+ * very early to start pinging the watchdog (misc devices are not yet
-+ * available), and later module_init() just registers the misc device.
-+ */
-+static int gpio_wdt_init_late(void)
-+{
-+ int ret;
-+
-+ ret = misc_register(&gpio_wdt_misc);
-+ if (ret < 0) {
-+ pr_err("GPIO_WDT: failed to register misc device\n");
-+ return ret;
-+ }
-+ return 0;
-+}
-+#ifndef MODULE
-+module_init(gpio_wdt_init_late);
-+#endif
-+
-+static void __exit gpio_wdt_exit(void)
-+{
-+ platform_driver_unregister(&gpio_wdt_driver);
-+}
-+module_exit(gpio_wdt_exit);
-+
-+MODULE_AUTHOR("Michael Stickel, Florian Fainelli, Mathias Adam");
-+MODULE_DESCRIPTION("Driver for GPIO hardware watchdogs");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-+MODULE_ALIAS("platform:gpio-wdt");
---- /dev/null
-+++ b/include/linux/old_gpio_wdt.h
-@@ -0,0 +1,21 @@
-+/*
-+ * Definitions for the GPIO watchdog driver
-+ *
-+ * Copyright (C) 2013 Mathias Adam <m.adam--linux@adamis.de>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#ifndef _GPIO_WDT_H_
-+#define _GPIO_WDT_H_
-+
-+struct gpio_wdt_platform_data {
-+ int gpio; /* GPIO line number */
-+ int interval; /* watchdog reset interval in system ticks */
-+ int first_interval; /* first wd reset interval in system ticks */
-+};
-+
-+#endif /* _GPIO_WDT_H_ */
+++ /dev/null
-From 5c81397a0147ea59c778d1de14ef54e2268221f6 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 8 Apr 2015 06:58:11 +0200
-Subject: [PATCH] ssb: reject PCI writes setting CardBus bridge resources
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-If SoC has a CardBus we can set resources of device at slot 1 only. It's
-impossigle to set bridge resources as it simply overwrites device 1
-configuration and usually results in Data bus error-s.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/ssb/driver_pcicore.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/ssb/driver_pcicore.c
-+++ b/drivers/ssb/driver_pcicore.c
-@@ -164,6 +164,10 @@ static int ssb_extpci_write_config(struc
- WARN_ON(!pc->hostmode);
- if (unlikely(len != 1 && len != 2 && len != 4))
- goto out;
-+ /* CardBus SoCs allow configuring dev 1 resources only */
-+ if (extpci_core->cardbusmode && dev != 1 &&
-+ off >= PCI_BASE_ADDRESS_0 && off <= PCI_BASE_ADDRESS_5)
-+ goto out;
- addr = get_cfgspace_addr(pc, bus, dev, func, off);
- if (unlikely(!addr))
- goto out;
+++ /dev/null
---- a/drivers/pcmcia/yenta_socket.c
-+++ b/drivers/pcmcia/yenta_socket.c
-@@ -920,6 +920,8 @@ static unsigned int yenta_probe_irq(stru
- * Probe for usable interrupts using the force
- * register to generate bogus card status events.
- */
-+#ifndef CONFIG_BCM47XX
-+ /* WRT54G3G does not like this */
- cb_writel(socket, CB_SOCKET_EVENT, -1);
- cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK);
- reg = exca_readb(socket, I365_CSCINT);
-@@ -935,6 +937,7 @@ static unsigned int yenta_probe_irq(stru
- }
- cb_writel(socket, CB_SOCKET_MASK, 0);
- exca_writeb(socket, I365_CSCINT, reg);
-+#endif
-
- mask = probe_irq_mask(val) & 0xffff;
-
-@@ -1019,6 +1022,10 @@ static void yenta_get_socket_capabilitie
- else
- socket->socket.irq_mask = 0;
-
-+ /* irq mask probing is broken for the WRT54G3G */
-+ if (socket->socket.irq_mask == 0)
-+ socket->socket.irq_mask = 0x6f8;
-+
- dev_info(&socket->dev->dev, "ISA IRQ mask 0x%04x, PCI irq %d\n",
- socket->socket.irq_mask, socket->cb_irq);
- }
-@@ -1250,6 +1257,15 @@ static int yenta_probe(struct pci_dev *d
- dev_info(&dev->dev, "Socket status: %08x\n",
- cb_readl(socket, CB_SOCKET_STATE));
-
-+ /* Generate an interrupt on card insert/remove */
-+ config_writew(socket, CB_SOCKET_MASK, CB_CSTSMASK | CB_CDMASK);
-+
-+ /* Set up Multifunction Routing Status Register */
-+ config_writew(socket, 0x8C, 0x1000 /* MFUNC3 to GPIO3 */ | 0x2 /* MFUNC0 to INTA */);
-+
-+ /* Switch interrupts to parallelized */
-+ config_writeb(socket, 0x92, 0x64);
-+
- yenta_fixup_parent_bridge(dev->subordinate);
-
- /* Register it with the pcmcia layer.. */
+++ /dev/null
---- a/drivers/ssb/driver_pcicore.c
-+++ b/drivers/ssb/driver_pcicore.c
-@@ -390,7 +390,7 @@ static void ssb_pcicore_init_hostmode(st
- set_io_port_base(ssb_pcicore_controller.io_map_base);
- /* Give some time to the PCI controller to configure itself with the new
- * values. Not waiting at this point causes crashes of the machine. */
-- mdelay(10);
-+ mdelay(300);
- register_pci_controller(&ssb_pcicore_controller);
- }
-
+++ /dev/null
---- a/drivers/firmware/broadcom/bcm47xx_nvram.c
-+++ b/drivers/firmware/broadcom/bcm47xx_nvram.c
-@@ -34,7 +34,8 @@ struct nvram_header {
- u32 config_ncdl; /* ncdl values for memc */
- };
-
--static char nvram_buf[NVRAM_SPACE];
-+char nvram_buf[NVRAM_SPACE];
-+EXPORT_SYMBOL(nvram_buf);
- static size_t nvram_len;
- static const u32 nvram_sizes[] = {0x6000, 0x8000, 0xF000, 0x10000};
- static int cfe_env;
---- a/arch/mips/mm/cache.c
-+++ b/arch/mips/mm/cache.c
-@@ -64,6 +64,7 @@ void (*_dma_cache_wback)(unsigned long s
- void (*_dma_cache_inv)(unsigned long start, unsigned long size);
-
- EXPORT_SYMBOL(_dma_cache_wback_inv);
-+EXPORT_SYMBOL(_dma_cache_inv);
-
- #endif /* CONFIG_DMA_NONCOHERENT */
-
+++ /dev/null
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_BCM=y
-CONFIG_ARCH_BCM_5301X=y
-CONFIG_ARCH_BCM_53573=y
-# CONFIG_ARCH_BCM_HR2 is not set
-CONFIG_ARCH_BCM_IPROC=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_KCOV=y
-CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
-CONFIG_ARCH_HAS_PHYS_TO_DMA=y
-CONFIG_ARCH_HAS_SET_MEMORY=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
-CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARM=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-# CONFIG_ARM_ATAG_DTB_COMPAT is not set
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_ARM_ERRATA_764369=y
-CONFIG_ARM_ERRATA_775420=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GLOBAL_TIMER=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_HEAVY_MB=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-# CONFIG_ARM_LPAE is not set
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-# CONFIG_ARM_SP805_WATCHDOG is not set
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ATAGS=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BCM47XX_NVRAM=y
-CONFIG_BCM47XX_SPROM=y
-CONFIG_BCM47XX_WDT=y
-CONFIG_BCMA=y
-CONFIG_BCMA_BLOCKIO=y
-CONFIG_BCMA_DEBUG=y
-CONFIG_BCMA_DRIVER_GMAC_CMN=y
-CONFIG_BCMA_DRIVER_GPIO=y
-CONFIG_BCMA_DRIVER_PCI=y
-CONFIG_BCMA_HOST_PCI=y
-CONFIG_BCMA_HOST_PCI_POSSIBLE=y
-CONFIG_BCMA_HOST_SOC=y
-CONFIG_BCMA_SFLASH=y
-CONFIG_BCM_NET_PHYLIB=y
-CONFIG_BCM_NS_THERMAL=y
-CONFIG_BGMAC=y
-CONFIG_BGMAC_BCMA=y
-# CONFIG_BGMAC_PLATFORM is not set
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BOUNCE=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_CACHE_L2X0=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y
-CONFIG_CLKSRC_MMIO=y
-# CONFIG_CLK_BCM_NS2 is not set
-CONFIG_CLK_BCM_NSP=y
-# CONFIG_CLK_BCM_SR is not set
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_IPROC=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_HAS_ASID=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SPECTRE=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_ACOMP2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_BCM_5301X=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
-CONFIG_DEBUG_UART_8250=y
-# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
-CONFIG_DEBUG_UART_8250_SHIFT=0
-CONFIG_DEBUG_UART_PHYS=0x18000300
-CONFIG_DEBUG_UART_VIRT=0xf1000300
-CONFIG_DEBUG_UNCOMPRESS=y
-CONFIG_DEBUG_USER=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EXTCON=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_74X164=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_BITREVERSE=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARM_ARCH_TIMER=y
-CONFIG_HAVE_ARM_SCU=y
-CONFIG_HAVE_ARM_SMCCC=y
-CONFIG_HAVE_ARM_TWD=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
-CONFIG_HAVE_EBPF_JIT=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_RSEQ=y
-CONFIG_HAVE_SMP=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HIGHMEM=y
-# CONFIG_HIGHPTE is not set
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MDIO_BCM_IPROC=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_BUS_MUX=y
-# CONFIG_MDIO_BUS_MUX_BCM_IPROC is not set
-CONFIG_MDIO_BUS_MUX_MMIOREG=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MIGRATION=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_BCM47XXSFLASH=y
-CONFIG_MTD_BCM47XX_PARTS=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_BRCMNAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_PARSER_TRX=y
-# CONFIG_MTD_PHYSMAP_OF is not set
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_SEAMA_FW=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NR_CPUS=2
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PCI=y
-CONFIG_PCIE_IPROC=y
-CONFIG_PCIE_IPROC_BCMA=y
-# CONFIG_PCIE_IPROC_PLATFORM is not set
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-# CONFIG_PCI_V3_SEMI is not set
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-# CONFIG_PHY_BCM_NS_USB2 is not set
-# CONFIG_PHY_BCM_NS_USB3 is not set
-# CONFIG_PHY_BCM_SR_PCIE is not set
-# CONFIG_PHY_BRCM_SATA is not set
-# CONFIG_PHY_NS2_USB_DRD is not set
-CONFIG_PINCTRL=y
-# CONFIG_PINCTRL_IPROC_GPIO is not set
-CONFIG_PINCTRL_NS=y
-# CONFIG_PINCTRL_NS2_MUX is not set
-# CONFIG_PL310_ERRATA_588369 is not set
-# CONFIG_PL310_ERRATA_727915 is not set
-# CONFIG_PL310_ERRATA_753970 is not set
-# CONFIG_PL310_ERRATA_769419 is not set
-CONFIG_RATIONAL=y
-CONFIG_RCU_NEED_SEGCBLIST=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_REFCOUNT_FULL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SERIAL_8250_FSL=y
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_BCM_QSPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SRCU=y
-CONFIG_SWCONFIG=y
-CONFIG_SWCONFIG_B53=y
-# CONFIG_SWCONFIG_B53_MMAP_DRIVER is not set
-CONFIG_SWCONFIG_B53_PHY_DRIVER=y
-CONFIG_SWCONFIG_B53_PHY_FIXUP=y
-CONFIG_SWCONFIG_B53_SRAB_DRIVER=y
-CONFIG_SWPHY=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_OF=y
-# CONFIG_THUMB2_KERNEL is not set
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-# CONFIG_VFP is not set
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
+++ /dev/null
-From b0465fdfdd7e7c1afe2fae1cb36b94e1ce89732e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sat, 28 Jul 2018 14:13:57 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Specify flash partitions
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Most devices use Broadcom standard partitions which allows them to be
-described with the "brcm,bcm947xx-cfe-partitions". Exceptions are:
-1) TP-LINK devices which use "os-image" partition with TRX containing
- kernel only + separated rootfs partition.
-2) Asus RT-AC87U with custom "asus" partition.
-
-This commit also removes undocumented and unsupported linux,part-probe
-binding which got accidentally upstreamed while describing SPI
-controller.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts | 28 +++++++++++++++++++
- arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 31 ++++++++++++++++++++++
- arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 28 +++++++++++++++++++
- arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi | 4 +++
- arch/arm/boot/dts/bcm5301x.dtsi | 5 +++-
- 5 files changed, 95 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-@@ -94,6 +94,34 @@
-
- &spi_nor {
- status = "okay";
-+
-+ partitions {
-+ compatible = "fixed-partitions";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ boot@0 {
-+ label = "boot";
-+ reg = <0x000000 0x040000>;
-+ read-only;
-+ };
-+
-+ os-image@100000 {
-+ label = "os-image";
-+ reg = <0x040000 0x200000>;
-+ compatible = "brcm,trx";
-+ };
-+
-+ rootfs@240000 {
-+ label = "rootfs";
-+ reg = <0x240000 0xc00000>;
-+ };
-+
-+ nvram@ff0000 {
-+ label = "nvram";
-+ reg = <0xff0000 0x010000>;
-+ };
-+ };
- };
-
- &usb2 {
---- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-@@ -66,3 +66,34 @@
- &usb3_phy {
- status = "okay";
- };
-+
-+&nandcs {
-+ partitions {
-+ compatible = "fixed-partitions";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ boot@0 {
-+ label = "boot";
-+ reg = <0x00000000 0x00080000>;
-+ read-only;
-+ };
-+
-+ nvram@80000 {
-+ label = "nvram";
-+ reg = <0x00080000 0x00180000>;
-+ };
-+
-+ firmware@200000 {
-+ label = "firmware";
-+ reg = <0x00200000 0x07cc0000>;
-+ compatible = "brcm,trx";
-+ };
-+
-+ asus@7ec0000 {
-+ label = "asus";
-+ reg = <0x07ec0000 0x00140000>;
-+ read-only;
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-@@ -103,6 +103,34 @@
-
- &spi_nor {
- status = "okay";
-+
-+ partitions {
-+ compatible = "fixed-partitions";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ boot@0 {
-+ label = "boot";
-+ reg = <0x000000 0x040000>;
-+ read-only;
-+ };
-+
-+ os-image@100000 {
-+ label = "os-image";
-+ reg = <0x040000 0x200000>;
-+ compatible = "brcm,trx";
-+ };
-+
-+ rootfs@240000 {
-+ label = "rootfs";
-+ reg = <0x240000 0xc00000>;
-+ };
-+
-+ nvram@ff0000 {
-+ label = "nvram";
-+ reg = <0xff0000 0x010000>;
-+ };
-+ };
- };
-
- &usb3_phy {
---- a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
-@@ -12,6 +12,10 @@
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
-+
-+ partitions {
-+ compatible = "brcm,bcm947xx-cfe-partitions";
-+ };
- };
- };
- };
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -475,8 +475,11 @@
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <20000000>;
-- linux,part-probe = "ofpart", "bcm47xxpart";
- status = "disabled";
-+
-+ partitions {
-+ compatible = "brcm,bcm947xx-cfe-partitions";
-+ };
- };
- };
-
+++ /dev/null
-From 26ff86f7794b9466481ccf29ac79925d327f106d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 20 Sep 2018 13:18:47 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Relicense BCM47081/BCM4709 files to the
- GPL 2.0+ / MIT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This matches licensing used by other BCM5301X files and is preferred as:
-1) GPL 2.0+ makes it clearly compatible with Linux kernel
-2) MIT is also permissive but preferred over ISC
-
-Both files were fully developed by me. Commits touching them were signed
-by Florian and Hauke due to submitting process only.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47081.dtsi | 13 +------------
- arch/arm/boot/dts/bcm4709.dtsi | 3 +--
- 2 files changed, 2 insertions(+), 14 deletions(-)
-
---- a/arch/arm/boot/dts/bcm47081.dtsi
-+++ b/arch/arm/boot/dts/bcm47081.dtsi
-@@ -1,20 +1,9 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
- * Broadcom BCM470X / BCM5301X ARM platform code.
- * DTS for BCM47081 SoC.
- *
- * Copyright © 2014 Rafał Miłecki <zajec5@gmail.com>
-- *
-- * Permission to use, copy, modify, and/or distribute this software for any
-- * purpose with or without fee is hereby granted, provided that the above
-- * copyright notice and this permission notice appear in all copies.
-- *
-- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
-- * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-- * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
-- * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-- * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-- * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-- * PERFORMANCE OF THIS SOFTWARE.
- */
-
- #include "bcm5301x.dtsi"
---- a/arch/arm/boot/dts/bcm4709.dtsi
-+++ b/arch/arm/boot/dts/bcm4709.dtsi
-@@ -1,7 +1,6 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
- * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
-- *
-- * Licensed under the ISC license.
- */
-
- #include "bcm4708.dtsi"
+++ /dev/null
-From d10967344375026ca8762b6080dec2585d895906 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 20 Sep 2018 13:20:19 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Relicense BCM47094 file to the GPL 2.0+ /
- MIT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This matches licensing used by other BCM5301X files and is preferred as:
-1) GPL 2.0+ makes it clearly compatible with Linux kernel
-2) MIT is also permissive but preferred over ISC
-
-This file has been developed by me & once modified by Vivek.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Vivek Unune <npcomplete13@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47094.dtsi | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/arch/arm/boot/dts/bcm47094.dtsi
-+++ b/arch/arm/boot/dts/bcm47094.dtsi
-@@ -1,7 +1,6 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
- * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
-- *
-- * Licensed under the ISC license.
- */
-
- #include "bcm4708.dtsi"
+++ /dev/null
-From 1c9001b4f69a37820862286b3bbcdde152a52dcf Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 20 Sep 2018 13:37:47 +0200
-Subject: [PATCH] ARM: dts: BCM53573: Relicense Tenda AC9 file to the GPL 2.0+
- / MIT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This matches licensing used by most of BCM5301X files and is preferred as:
-1) GPL 2.0+ makes it clearly compatible with Linux kernel
-2) MIT is also permissive but preferred over ISC
-
-This file was fully developed by me.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47189-tenda-ac9.dts | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
-+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
-@@ -1,7 +1,6 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
- * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
-- *
-- * Licensed under the ISC license.
- */
-
- /dts-v1/;
+++ /dev/null
-From ca3a6e705cad10662827093d5426abe078861793 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 20 Sep 2018 13:39:28 +0200
-Subject: [PATCH] ARM: dts: BCM53573: Relicense SoC file to the GPL 2.0+ / MIT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This matches licensing used by most of BCM5301X files and is preferred as:
-1) GPL 2.0+ makes it clearly compatible with Linux kernel
-2) MIT is also permissive but preferred over ISC
-
-This file has been developed by me & once modified by Rob dropping a
-single leading zero in an UART address.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm53573.dtsi | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/arch/arm/boot/dts/bcm53573.dtsi
-+++ b/arch/arm/boot/dts/bcm53573.dtsi
-@@ -1,7 +1,6 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
- * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
-- *
-- * Licensed under the ISC license.
- */
-
- #include <dt-bindings/gpio/gpio.h>
+++ /dev/null
-From 03e96644d7a810916fc4997d572577e876908b18 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ren=C3=A9=20Kjellerup?= <rk.katana.steel@gmail.com>
-Date: Mon, 1 Oct 2018 15:07:16 -0700
-Subject: [PATCH] ARM: dts: BCM5301X: Add basic DT for Linksys EA6500 V2
-
-It is wireless home router based on BCM4708A0 with BCM4360 + BCM4331
-wireless chipsets. The BCM4331 5GHz chip currently isn't supported only
-due to missing compatible firmware.
-
-Signed-off-by: Rene Kjellerup <rk.katana.steel@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts | 45 +++++++++++++++++++++++++
- 2 files changed, 46 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -88,6 +88,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm4708-asus-rt-ac68u.dtb \
- bcm4708-buffalo-wzr-1750dhp.dtb \
- bcm4708-linksys-ea6300-v1.dtb \
-+ bcm4708-linksys-ea6500-v2.dtb \
- bcm4708-luxul-xap-1510.dtb \
- bcm4708-luxul-xwc-1000.dtb \
- bcm4708-netgear-r6250.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
-@@ -0,0 +1,45 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/*
-+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
-+ * Copyright (C) 2018 Rene Kjellerup <rk.katana.steel@gmail.com>
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+
-+/ {
-+ compatible = "linksys,ea6500-v2", "brcm,bcm4708";
-+ model = "Linksys EA6500 V2";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ wps {
-+ label = "WPS";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&usb3_phy {
-+ status = "okay";
-+};
+++ /dev/null
-From 9994241ac97cb84d1df98fdc172d3cc6b04b11bf Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 9 Nov 2018 09:56:49 +0100
-Subject: [PATCH] ARM: dts: BCM5301X: Describe Northstar pins mux controller
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This describes hardware & will allow referencing pin functions. The
-first usage is UART1 which allows supporting devices using it.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 44 +++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 44 insertions(+)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -37,6 +37,8 @@
- reg = <0x0400 0x100>;
- interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&iprocslow>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinmux_uart1>;
- status = "disabled";
- };
- };
-@@ -391,6 +393,48 @@
- status = "disabled";
- };
-
-+ dmu@1800c000 {
-+ compatible = "simple-bus";
-+ ranges = <0 0x1800c000 0x1000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ cru@100 {
-+ compatible = "simple-bus";
-+ reg = <0x100 0x1a4>;
-+ ranges;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ pin-controller@1c0 {
-+ compatible = "brcm,bcm4708-pinmux";
-+ reg = <0x1c0 0x24>;
-+ reg-names = "cru_gpio_control";
-+
-+ spi-pins {
-+ groups = "spi_grp";
-+ function = "spi";
-+ };
-+
-+ i2c {
-+ groups = "i2c_grp";
-+ function = "i2c";
-+ };
-+
-+ pwm {
-+ groups = "pwm0_grp", "pwm1_grp",
-+ "pwm2_grp", "pwm3_grp";
-+ function = "pwm";
-+ };
-+
-+ pinmux_uart1: uart1 {
-+ groups = "uart1_grp";
-+ function = "uart1";
-+ };
-+ };
-+ };
-+ };
-+
- lcpll0: lcpll0@1800c100 {
- #clock-cells = <1>;
- compatible = "brcm,nsp-lcpll0";
+++ /dev/null
-From b7f264fa496eb2a6dd1d67dc91dbe8ffcb142487 Mon Sep 17 00:00:00 2001
-From: Dan Haab <riproute@gmail.com>
-Date: Sun, 2 Dec 2018 17:00:15 -0700
-Subject: [PATCH] ARM: dts: BCM53573: Relicense Luxul files to the GPL 2.0+ /
- MIT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This matches licensing used by other BCM53573 files and BCM5301X.
-
-Signed-off-by: Dan Haab <dan.haab@luxul.com>
-Acked-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts | 3 +--
- arch/arm/boot/dts/bcm47189-luxul-xap-810.dts | 3 +--
- 2 files changed, 2 insertions(+), 4 deletions(-)
-
---- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-@@ -1,7 +1,6 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
- * Copyright 2017 Luxul Inc.
-- *
-- * Licensed under the ISC license.
- */
-
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-@@ -1,7 +1,6 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- /*
- * Copyright 2017 Luxul Inc.
-- *
-- * Licensed under the ISC license.
- */
-
- /dts-v1/;
+++ /dev/null
-From 40a17923367118e32e5e413a952736dd83635b32 Mon Sep 17 00:00:00 2001
-From: Hao Dong <halbertdong@gmail.com>
-Date: Sun, 20 Jan 2019 23:33:27 +0100
-Subject: [PATCH] ARM: dts: BCM5301X: Add basic DT for Phicomm K3
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This router has BCM4709C0 SoC, 128 MiB NAND flash (MX30LF1G18AC-TI),
-512 MiB memory and 3 x LAN and 1 x WAN ports. WiFi chips are
-BCM4366C0 x 2. The router has a small LCD and 3 capactive keys driven by
-a PIC microcontroller, which is in turn wired to UART1 of main board.
-
-Signed-off-by: Hao Dong <halbertdong@gmail.com>
-[rmilecki: drop chosen { }, fix whitespaces, update commit message]
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm47094-phicomm-k3.dts | 71 +++++++++++++++++++++++
- 2 files changed, 72 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47094-phicomm-k3.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -114,6 +114,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm47094-luxul-xwr-3100.dtb \
- bcm47094-luxul-xwr-3150-v1.dtb \
- bcm47094-netgear-r8500.dtb \
-+ bcm47094-phicomm-k3.dtb \
- bcm94708.dtb \
- bcm94709.dtb \
- bcm953012er.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
-@@ -0,0 +1,71 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/*
-+ * Copyright (C) 2017 Hamster Tian <haotia@gmail.com>
-+ * Copyright (C) 2019 Hao Dong <halbertdong@gmail.com>
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm47094.dtsi"
-+#include "bcm5301x-nand-cs0-bch4.dtsi"
-+
-+/ {
-+ compatible = "phicomm,k3", "brcm,bcm47094", "brcm,bcm4708";
-+ model = "Phicomm K3";
-+
-+ memory {
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x18000000>;
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&uart1 {
-+ status = "okay";
-+};
-+
-+&usb3_phy {
-+ status = "okay";
-+};
-+
-+&nandcs {
-+ partitions {
-+ compatible = "fixed-partitions";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ partition@0 {
-+ label = "boot";
-+ reg = <0x0000000 0x0080000>;
-+ read-only;
-+ };
-+
-+ partition@80000 {
-+ label = "nvram";
-+ reg = <0x0080000 0x0100000>;
-+ };
-+
-+ partition@180000{
-+ label = "phicomm";
-+ reg = <0x0180000 0x0280000>;
-+ read-only;
-+ };
-+
-+ partition@400000 {
-+ label = "firmware";
-+ reg = <0x0400000 0x7C00000>;
-+ compatible = "brcm,trx";
-+ };
-+ };
-+};
+++ /dev/null
-From c12fb1774deaa9c9408b19db8d43d3612f6e47a0 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 26 Sep 2018 21:31:03 +0200
-Subject: [PATCH] pinctrl: bcm: add Northstar driver
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This driver provides support for Northstar mux controller. It differs
-from Northstar Plus one so a new binding and driver were needed.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/bcm/Kconfig | 13 ++
- drivers/pinctrl/bcm/Makefile | 1 +
- drivers/pinctrl/bcm/pinctrl-ns.c | 372 +++++++++++++++++++++++++++++++++++++++
- 3 files changed, 386 insertions(+)
- create mode 100644 drivers/pinctrl/bcm/pinctrl-ns.c
-
---- a/drivers/pinctrl/bcm/Kconfig
-+++ b/drivers/pinctrl/bcm/Kconfig
-@@ -73,6 +73,19 @@ config PINCTRL_CYGNUS_MUX
- configuration, with the exception that certain individual pins
- can be overridden to GPIO function
-
-+config PINCTRL_NS
-+ bool "Broadcom Northstar pins driver"
-+ depends on OF && (ARCH_BCM_5301X || COMPILE_TEST)
-+ select PINMUX
-+ select GENERIC_PINCONF
-+ default ARCH_BCM_5301X
-+ help
-+ Say yes here to enable the Broadcom NS SoC pins driver.
-+
-+ The Broadcom Northstar pins driver supports muxing multi-purpose pins
-+ that can be used for various functions (e.g. SPI, I2C, UART) as well
-+ as GPIOs.
-+
- config PINCTRL_NSP_GPIO
- bool "Broadcom NSP GPIO (with PINCONF) driver"
- depends on OF_GPIO && (ARCH_BCM_NSP || COMPILE_TEST)
---- a/drivers/pinctrl/bcm/Makefile
-+++ b/drivers/pinctrl/bcm/Makefile
-@@ -5,6 +5,7 @@ obj-$(CONFIG_PINCTRL_BCM281XX) += pinct
- obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
- obj-$(CONFIG_PINCTRL_IPROC_GPIO) += pinctrl-iproc-gpio.o
- obj-$(CONFIG_PINCTRL_CYGNUS_MUX) += pinctrl-cygnus-mux.o
-+obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o
- obj-$(CONFIG_PINCTRL_NSP_GPIO) += pinctrl-nsp-gpio.o
- obj-$(CONFIG_PINCTRL_NS2_MUX) += pinctrl-ns2-mux.o
- obj-$(CONFIG_PINCTRL_NSP_MUX) += pinctrl-nsp-mux.o
---- /dev/null
-+++ b/drivers/pinctrl/bcm/pinctrl-ns.c
-@@ -0,0 +1,372 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (C) 2018 Rafał Miłecki <rafal@milecki.pl>
-+ */
-+
-+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/of_device.h>
-+#include <linux/pinctrl/pinconf-generic.h>
-+#include <linux/pinctrl/pinctrl.h>
-+#include <linux/pinctrl/pinmux.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+
-+#define FLAG_BCM4708 BIT(1)
-+#define FLAG_BCM4709 BIT(2)
-+#define FLAG_BCM53012 BIT(3)
-+
-+struct ns_pinctrl {
-+ struct device *dev;
-+ unsigned int chipset_flag;
-+ struct pinctrl_dev *pctldev;
-+ void __iomem *base;
-+
-+ struct pinctrl_desc pctldesc;
-+ struct ns_pinctrl_group *groups;
-+ unsigned int num_groups;
-+ struct ns_pinctrl_function *functions;
-+ unsigned int num_functions;
-+};
-+
-+/*
-+ * Pins
-+ */
-+
-+static const struct pinctrl_pin_desc ns_pinctrl_pins[] = {
-+ { 0, "spi_clk", (void *)(FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012) },
-+ { 1, "spi_ss", (void *)(FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012) },
-+ { 2, "spi_mosi", (void *)(FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012) },
-+ { 3, "spi_miso", (void *)(FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012) },
-+ { 4, "i2c_scl", (void *)(FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012) },
-+ { 5, "i2c_sda", (void *)(FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012) },
-+ { 6, "mdc", (void *)(FLAG_BCM4709 | FLAG_BCM53012) },
-+ { 7, "mdio", (void *)(FLAG_BCM4709 | FLAG_BCM53012) },
-+ { 8, "pwm0", (void *)(FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012) },
-+ { 9, "pwm1", (void *)(FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012) },
-+ { 10, "pwm2", (void *)(FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012) },
-+ { 11, "pwm3", (void *)(FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012) },
-+ { 12, "uart1_rx", (void *)(FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012) },
-+ { 13, "uart1_tx", (void *)(FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012) },
-+ { 14, "uart1_cts", (void *)(FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012) },
-+ { 15, "uart1_rts", (void *)(FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012) },
-+ { 16, "uart2_rx", (void *)(FLAG_BCM4709 | FLAG_BCM53012) },
-+ { 17, "uart2_tx", (void *)(FLAG_BCM4709 | FLAG_BCM53012) },
-+/* TODO { ??, "xtal_out", (void *)(FLAG_BCM4709) }, */
-+ { 22, "sdio_pwr", (void *)(FLAG_BCM4709 | FLAG_BCM53012) },
-+ { 23, "sdio_en_1p8v", (void *)(FLAG_BCM4709 | FLAG_BCM53012) },
-+};
-+
-+/*
-+ * Groups
-+ */
-+
-+struct ns_pinctrl_group {
-+ const char *name;
-+ const unsigned int *pins;
-+ const unsigned int num_pins;
-+ unsigned int chipsets;
-+};
-+
-+static const unsigned int spi_pins[] = { 0, 1, 2, 3 };
-+static const unsigned int i2c_pins[] = { 4, 5 };
-+static const unsigned int mdio_pins[] = { 6, 7 };
-+static const unsigned int pwm0_pins[] = { 8 };
-+static const unsigned int pwm1_pins[] = { 9 };
-+static const unsigned int pwm2_pins[] = { 10 };
-+static const unsigned int pwm3_pins[] = { 11 };
-+static const unsigned int uart1_pins[] = { 12, 13, 14, 15 };
-+static const unsigned int uart2_pins[] = { 16, 17 };
-+static const unsigned int sdio_pwr_pins[] = { 22 };
-+static const unsigned int sdio_1p8v_pins[] = { 23 };
-+
-+#define NS_GROUP(_name, _pins, _chipsets) \
-+{ \
-+ .name = _name, \
-+ .pins = _pins, \
-+ .num_pins = ARRAY_SIZE(_pins), \
-+ .chipsets = _chipsets, \
-+}
-+
-+static const struct ns_pinctrl_group ns_pinctrl_groups[] = {
-+ NS_GROUP("spi_grp", spi_pins, FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012),
-+ NS_GROUP("i2c_grp", i2c_pins, FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012),
-+ NS_GROUP("mdio_grp", mdio_pins, FLAG_BCM4709 | FLAG_BCM53012),
-+ NS_GROUP("pwm0_grp", pwm0_pins, FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012),
-+ NS_GROUP("pwm1_grp", pwm1_pins, FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012),
-+ NS_GROUP("pwm2_grp", pwm2_pins, FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012),
-+ NS_GROUP("pwm3_grp", pwm3_pins, FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012),
-+ NS_GROUP("uart1_grp", uart1_pins, FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012),
-+ NS_GROUP("uart2_grp", uart2_pins, FLAG_BCM4709 | FLAG_BCM53012),
-+ NS_GROUP("sdio_pwr_grp", sdio_pwr_pins, FLAG_BCM4709 | FLAG_BCM53012),
-+ NS_GROUP("sdio_1p8v_grp", sdio_1p8v_pins, FLAG_BCM4709 | FLAG_BCM53012),
-+};
-+
-+/*
-+ * Functions
-+ */
-+
-+struct ns_pinctrl_function {
-+ const char *name;
-+ const char * const *groups;
-+ const unsigned int num_groups;
-+ unsigned int chipsets;
-+};
-+
-+static const char * const spi_groups[] = { "spi_grp" };
-+static const char * const i2c_groups[] = { "i2c_grp" };
-+static const char * const mdio_groups[] = { "mdio_grp" };
-+static const char * const pwm_groups[] = { "pwm0_grp", "pwm1_grp", "pwm2_grp",
-+ "pwm3_grp" };
-+static const char * const uart1_groups[] = { "uart1_grp" };
-+static const char * const uart2_groups[] = { "uart2_grp" };
-+static const char * const sdio_groups[] = { "sdio_pwr_grp", "sdio_1p8v_grp" };
-+
-+#define NS_FUNCTION(_name, _groups, _chipsets) \
-+{ \
-+ .name = _name, \
-+ .groups = _groups, \
-+ .num_groups = ARRAY_SIZE(_groups), \
-+ .chipsets = _chipsets, \
-+}
-+
-+static const struct ns_pinctrl_function ns_pinctrl_functions[] = {
-+ NS_FUNCTION("spi", spi_groups, FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012),
-+ NS_FUNCTION("i2c", i2c_groups, FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012),
-+ NS_FUNCTION("mdio", mdio_groups, FLAG_BCM4709 | FLAG_BCM53012),
-+ NS_FUNCTION("pwm", pwm_groups, FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012),
-+ NS_FUNCTION("uart1", uart1_groups, FLAG_BCM4708 | FLAG_BCM4709 | FLAG_BCM53012),
-+ NS_FUNCTION("uart2", uart2_groups, FLAG_BCM4709 | FLAG_BCM53012),
-+ NS_FUNCTION("sdio", sdio_groups, FLAG_BCM4709 | FLAG_BCM53012),
-+};
-+
-+/*
-+ * Groups code
-+ */
-+
-+static int ns_pinctrl_get_groups_count(struct pinctrl_dev *pctrl_dev)
-+{
-+ struct ns_pinctrl *ns_pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
-+
-+ return ns_pinctrl->num_groups;
-+}
-+
-+static const char *ns_pinctrl_get_group_name(struct pinctrl_dev *pctrl_dev,
-+ unsigned int selector)
-+{
-+ struct ns_pinctrl *ns_pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
-+
-+ return ns_pinctrl->groups[selector].name;
-+}
-+
-+static int ns_pinctrl_get_group_pins(struct pinctrl_dev *pctrl_dev,
-+ unsigned int selector,
-+ const unsigned int **pins,
-+ unsigned int *num_pins)
-+{
-+ struct ns_pinctrl *ns_pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
-+
-+ *pins = ns_pinctrl->groups[selector].pins;
-+ *num_pins = ns_pinctrl->groups[selector].num_pins;
-+
-+ return 0;
-+}
-+
-+static const struct pinctrl_ops ns_pinctrl_ops = {
-+ .get_groups_count = ns_pinctrl_get_groups_count,
-+ .get_group_name = ns_pinctrl_get_group_name,
-+ .get_group_pins = ns_pinctrl_get_group_pins,
-+ .dt_node_to_map = pinconf_generic_dt_node_to_map_group,
-+ .dt_free_map = pinconf_generic_dt_free_map,
-+};
-+
-+/*
-+ * Functions code
-+ */
-+
-+static int ns_pinctrl_get_functions_count(struct pinctrl_dev *pctrl_dev)
-+{
-+ struct ns_pinctrl *ns_pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
-+
-+ return ns_pinctrl->num_functions;
-+}
-+
-+static const char *ns_pinctrl_get_function_name(struct pinctrl_dev *pctrl_dev,
-+ unsigned int selector)
-+{
-+ struct ns_pinctrl *ns_pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
-+
-+ return ns_pinctrl->functions[selector].name;
-+}
-+
-+static int ns_pinctrl_get_function_groups(struct pinctrl_dev *pctrl_dev,
-+ unsigned int selector,
-+ const char * const **groups,
-+ unsigned * const num_groups)
-+{
-+ struct ns_pinctrl *ns_pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
-+
-+ *groups = ns_pinctrl->functions[selector].groups;
-+ *num_groups = ns_pinctrl->functions[selector].num_groups;
-+
-+ return 0;
-+}
-+
-+static int ns_pinctrl_set_mux(struct pinctrl_dev *pctrl_dev,
-+ unsigned int func_select,
-+ unsigned int grp_select)
-+{
-+ struct ns_pinctrl *ns_pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
-+ u32 unset = 0;
-+ u32 tmp;
-+ int i;
-+
-+ for (i = 0; i < ns_pinctrl->groups[grp_select].num_pins; i++) {
-+ int pin_number = ns_pinctrl->groups[grp_select].pins[i];
-+
-+ unset |= BIT(pin_number);
-+ }
-+
-+ tmp = readl(ns_pinctrl->base);
-+ tmp &= ~unset;
-+ writel(tmp, ns_pinctrl->base);
-+
-+ return 0;
-+}
-+
-+static const struct pinmux_ops ns_pinctrl_pmxops = {
-+ .get_functions_count = ns_pinctrl_get_functions_count,
-+ .get_function_name = ns_pinctrl_get_function_name,
-+ .get_function_groups = ns_pinctrl_get_function_groups,
-+ .set_mux = ns_pinctrl_set_mux,
-+};
-+
-+/*
-+ * Controller code
-+ */
-+
-+static struct pinctrl_desc ns_pinctrl_desc = {
-+ .name = "pinctrl-ns",
-+ .pctlops = &ns_pinctrl_ops,
-+ .pmxops = &ns_pinctrl_pmxops,
-+};
-+
-+static const struct of_device_id ns_pinctrl_of_match_table[] = {
-+ { .compatible = "brcm,bcm4708-pinmux", .data = (void *)FLAG_BCM4708, },
-+ { .compatible = "brcm,bcm4709-pinmux", .data = (void *)FLAG_BCM4709, },
-+ { .compatible = "brcm,bcm53012-pinmux", .data = (void *)FLAG_BCM53012, },
-+ { }
-+};
-+
-+static int ns_pinctrl_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ const struct of_device_id *of_id;
-+ struct ns_pinctrl *ns_pinctrl;
-+ struct pinctrl_desc *pctldesc;
-+ struct pinctrl_pin_desc *pin;
-+ struct ns_pinctrl_group *group;
-+ struct ns_pinctrl_function *function;
-+ struct resource *res;
-+ int i;
-+
-+ ns_pinctrl = devm_kzalloc(dev, sizeof(*ns_pinctrl), GFP_KERNEL);
-+ if (!ns_pinctrl)
-+ return -ENOMEM;
-+ pctldesc = &ns_pinctrl->pctldesc;
-+ platform_set_drvdata(pdev, ns_pinctrl);
-+
-+ /* Set basic properties */
-+
-+ ns_pinctrl->dev = dev;
-+
-+ of_id = of_match_device(ns_pinctrl_of_match_table, dev);
-+ if (!of_id)
-+ return -EINVAL;
-+ ns_pinctrl->chipset_flag = (unsigned int)of_id->data;
-+
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-+ "cru_gpio_control");
-+ ns_pinctrl->base = devm_ioremap_resource(dev, res);
-+ if (IS_ERR(ns_pinctrl->base)) {
-+ dev_err(dev, "Failed to map pinctrl regs\n");
-+ return PTR_ERR(ns_pinctrl->base);
-+ }
-+
-+ memcpy(pctldesc, &ns_pinctrl_desc, sizeof(*pctldesc));
-+
-+ /* Set pinctrl properties */
-+
-+ pctldesc->pins = devm_kcalloc(dev, ARRAY_SIZE(ns_pinctrl_pins),
-+ sizeof(struct pinctrl_pin_desc),
-+ GFP_KERNEL);
-+ if (!pctldesc->pins)
-+ return -ENOMEM;
-+ for (i = 0, pin = (struct pinctrl_pin_desc *)&pctldesc->pins[0];
-+ i < ARRAY_SIZE(ns_pinctrl_pins); i++) {
-+ const struct pinctrl_pin_desc *src = &ns_pinctrl_pins[i];
-+ unsigned int chipsets = (unsigned int)src->drv_data;
-+
-+ if (chipsets & ns_pinctrl->chipset_flag) {
-+ memcpy(pin++, src, sizeof(*src));
-+ pctldesc->npins++;
-+ }
-+ }
-+
-+ ns_pinctrl->groups = devm_kcalloc(dev, ARRAY_SIZE(ns_pinctrl_groups),
-+ sizeof(struct ns_pinctrl_group),
-+ GFP_KERNEL);
-+ if (!ns_pinctrl->groups)
-+ return -ENOMEM;
-+ for (i = 0, group = &ns_pinctrl->groups[0];
-+ i < ARRAY_SIZE(ns_pinctrl_groups); i++) {
-+ const struct ns_pinctrl_group *src = &ns_pinctrl_groups[i];
-+
-+ if (src->chipsets & ns_pinctrl->chipset_flag) {
-+ memcpy(group++, src, sizeof(*src));
-+ ns_pinctrl->num_groups++;
-+ }
-+ }
-+
-+ ns_pinctrl->functions = devm_kcalloc(dev,
-+ ARRAY_SIZE(ns_pinctrl_functions),
-+ sizeof(struct ns_pinctrl_function),
-+ GFP_KERNEL);
-+ if (!ns_pinctrl->functions)
-+ return -ENOMEM;
-+ for (i = 0, function = &ns_pinctrl->functions[0];
-+ i < ARRAY_SIZE(ns_pinctrl_functions); i++) {
-+ const struct ns_pinctrl_function *src = &ns_pinctrl_functions[i];
-+
-+ if (src->chipsets & ns_pinctrl->chipset_flag) {
-+ memcpy(function++, src, sizeof(*src));
-+ ns_pinctrl->num_functions++;
-+ }
-+ }
-+
-+ /* Register */
-+
-+ ns_pinctrl->pctldev = devm_pinctrl_register(dev, pctldesc, ns_pinctrl);
-+ if (IS_ERR(ns_pinctrl->pctldev)) {
-+ dev_err(dev, "Failed to register pinctrl\n");
-+ return PTR_ERR(ns_pinctrl->pctldev);
-+ }
-+
-+ return 0;
-+}
-+
-+static struct platform_driver ns_pinctrl_driver = {
-+ .probe = ns_pinctrl_probe,
-+ .driver = {
-+ .name = "ns-pinmux",
-+ .of_match_table = ns_pinctrl_of_match_table,
-+ },
-+};
-+
-+module_platform_driver(ns_pinctrl_driver);
-+
-+MODULE_AUTHOR("Rafał Miłecki");
-+MODULE_LICENSE("GPL v2");
-+MODULE_DEVICE_TABLE(of, ns_pinctrl_of_match_table);
+++ /dev/null
-From ce7bdb957b8e3f1cbf0a3358f1deef385dff6502 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 11 Oct 2018 13:23:40 +0200
-Subject: [PATCH] pinctrl: bcm: ns: Use uintptr_t for casting data
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Fix up a compiler error on 64bit architectures where pointers
-and integers differ in size.
-
-Suggested-by: Arnd Bergmann <arnd@arndb.de>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/bcm/pinctrl-ns.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/pinctrl/bcm/pinctrl-ns.c
-+++ b/drivers/pinctrl/bcm/pinctrl-ns.c
-@@ -285,7 +285,7 @@ static int ns_pinctrl_probe(struct platf
- of_id = of_match_device(ns_pinctrl_of_match_table, dev);
- if (!of_id)
- return -EINVAL;
-- ns_pinctrl->chipset_flag = (unsigned int)of_id->data;
-+ ns_pinctrl->chipset_flag = (uintptr_t)of_id->data;
-
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
- "cru_gpio_control");
-@@ -307,7 +307,7 @@ static int ns_pinctrl_probe(struct platf
- for (i = 0, pin = (struct pinctrl_pin_desc *)&pctldesc->pins[0];
- i < ARRAY_SIZE(ns_pinctrl_pins); i++) {
- const struct pinctrl_pin_desc *src = &ns_pinctrl_pins[i];
-- unsigned int chipsets = (unsigned int)src->drv_data;
-+ unsigned int chipsets = (uintptr_t)src->drv_data;
-
- if (chipsets & ns_pinctrl->chipset_flag) {
- memcpy(pin++, src, sizeof(*src));
+++ /dev/null
-From a49d784d5a8272d0f63c448fe8dc69e589db006e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 18 Dec 2018 16:58:08 +0100
-Subject: [PATCH] pinctrl: bcm: ns: support updated DT binding as syscon
- subnode
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Documentation has been recently updated specifying that pinctrl should
-be subnode of the CRU "syscon". Support that by using parent node for
-regmap and reading "offset" property from the DT.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/bcm/pinctrl-ns.c | 29 +++++++++++++++++++----------
- 1 file changed, 19 insertions(+), 10 deletions(-)
-
---- a/drivers/pinctrl/bcm/pinctrl-ns.c
-+++ b/drivers/pinctrl/bcm/pinctrl-ns.c
-@@ -5,6 +5,7 @@
-
- #include <linux/err.h>
- #include <linux/io.h>
-+#include <linux/mfd/syscon.h>
- #include <linux/module.h>
- #include <linux/of.h>
- #include <linux/of_device.h>
-@@ -12,6 +13,7 @@
- #include <linux/pinctrl/pinctrl.h>
- #include <linux/pinctrl/pinmux.h>
- #include <linux/platform_device.h>
-+#include <linux/regmap.h>
- #include <linux/slab.h>
-
- #define FLAG_BCM4708 BIT(1)
-@@ -22,7 +24,8 @@ struct ns_pinctrl {
- struct device *dev;
- unsigned int chipset_flag;
- struct pinctrl_dev *pctldev;
-- void __iomem *base;
-+ struct regmap *regmap;
-+ u32 offset;
-
- struct pinctrl_desc pctldesc;
- struct ns_pinctrl_group *groups;
-@@ -229,9 +232,9 @@ static int ns_pinctrl_set_mux(struct pin
- unset |= BIT(pin_number);
- }
-
-- tmp = readl(ns_pinctrl->base);
-+ regmap_read(ns_pinctrl->regmap, ns_pinctrl->offset, &tmp);
- tmp &= ~unset;
-- writel(tmp, ns_pinctrl->base);
-+ regmap_write(ns_pinctrl->regmap, ns_pinctrl->offset, tmp);
-
- return 0;
- }
-@@ -263,13 +266,13 @@ static const struct of_device_id ns_pinc
- static int ns_pinctrl_probe(struct platform_device *pdev)
- {
- struct device *dev = &pdev->dev;
-+ struct device_node *np = dev->of_node;
- const struct of_device_id *of_id;
- struct ns_pinctrl *ns_pinctrl;
- struct pinctrl_desc *pctldesc;
- struct pinctrl_pin_desc *pin;
- struct ns_pinctrl_group *group;
- struct ns_pinctrl_function *function;
-- struct resource *res;
- int i;
-
- ns_pinctrl = devm_kzalloc(dev, sizeof(*ns_pinctrl), GFP_KERNEL);
-@@ -287,12 +290,18 @@ static int ns_pinctrl_probe(struct platf
- return -EINVAL;
- ns_pinctrl->chipset_flag = (uintptr_t)of_id->data;
-
-- res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-- "cru_gpio_control");
-- ns_pinctrl->base = devm_ioremap_resource(dev, res);
-- if (IS_ERR(ns_pinctrl->base)) {
-- dev_err(dev, "Failed to map pinctrl regs\n");
-- return PTR_ERR(ns_pinctrl->base);
-+ ns_pinctrl->regmap = syscon_node_to_regmap(of_get_parent(np));
-+ if (IS_ERR(ns_pinctrl->regmap)) {
-+ int err = PTR_ERR(ns_pinctrl->regmap);
-+
-+ dev_err(dev, "Failed to map pinctrl regs: %d\n", err);
-+
-+ return err;
-+ }
-+
-+ if (of_property_read_u32(np, "offset", &ns_pinctrl->offset)) {
-+ dev_err(dev, "Failed to get register offset\n");
-+ return -ENOENT;
- }
-
- memcpy(pctldesc, &ns_pinctrl_desc, sizeof(*pctldesc));
+++ /dev/null
-From: Dan Haab <dan.haab@legrand.com>
-Date: Wed, 2 Oct 2019 09:57:26 -0600
-Subject: [PATCH] ARM: dts: BCM5301X: Add DT for Luxul XWC-2000
-
-It's a simple network device based on BCM47094 with just a single
-Ethernet port.
-
-Signed-off-by: Dan Haab <dan.haab@legrand.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts | 53 +++++++++++++++++++
- 2 files changed, 54 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -111,6 +111,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm47094-luxul-abr-4500.dtb \
- bcm47094-luxul-xap-1610.dtb \
- bcm47094-luxul-xbr-4500.dtb \
-+ bcm47094-luxul-xwc-2000.dtb \
- bcm47094-luxul-xwr-3100.dtb \
- bcm47094-luxul-xwr-3150-v1.dtb \
- bcm47094-netgear-r8500.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-@@ -0,0 +1,53 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/*
-+ * Copyright 2019 Legrand AV Inc.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm47094.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+
-+/ {
-+ compatible = "luxul,xwc-2000-v1", "brcm,bcm47094", "brcm,bcm4708";
-+ model = "Luxul XWC-2000 V1";
-+
-+ chosen {
-+ bootargs = "earlycon";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x18000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ status {
-+ label = "bcm53xx:green:status";
-+ gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "timer";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&uart1 {
-+ status = "okay";
-+};
-+
-+&spi_nor {
-+ status = "okay";
-+};
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sat, 1 Oct 2016 22:54:48 +0200
-Subject: [PATCH] usb: xhci: add support for performing fake doorbell
-
-Broadcom's Northstar XHCI controllers seem to need a special start
-procedure to work correctly. There isn't any official documentation of
-this, the problem is that controller doesn't detect any connected
-devices with default setup. Moreover connecting USB device to controller
-that doesn't run properly can cause SoC's watchdog issues.
-
-A workaround that was successfully tested on multiple devices is to
-perform a fake doorbell. This patch adds code for doing this and enables
-it on BCM4708 family.
----
- drivers/usb/host/xhci-plat.c | 6 +++++
- drivers/usb/host/xhci.c | 63 +++++++++++++++++++++++++++++++++++++++++---
- drivers/usb/host/xhci.h | 1 +
- 3 files changed, 67 insertions(+), 3 deletions(-)
-
---- a/drivers/usb/host/xhci-plat.c
-+++ b/drivers/usb/host/xhci-plat.c
-@@ -65,12 +65,18 @@ static int xhci_priv_resume_quirk(struct
-
- static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
- {
-+ struct platform_device *pdev = to_platform_device(dev);
-+ struct device_node *node = pdev->dev.of_node;
-+
- /*
- * As of now platform drivers don't provide MSI support so we ensure
- * here that the generic code does not try to make a pci_dev from our
- * dev struct in order to setup MSI
- */
- xhci->quirks |= XHCI_PLAT;
-+
-+ if (node && of_machine_is_compatible("brcm,bcm4708"))
-+ xhci->quirks |= XHCI_FAKE_DOORBELL;
- }
-
- /* called during probe() after chip reset completes */
---- a/drivers/usb/host/xhci.c
-+++ b/drivers/usb/host/xhci.c
-@@ -156,6 +156,49 @@ int xhci_start(struct xhci_hcd *xhci)
- return ret;
- }
-
-+/**
-+ * xhci_fake_doorbell - Perform a fake doorbell on a specified slot
-+ *
-+ * Some controllers require a fake doorbell to start correctly. Without that
-+ * they simply don't detect any devices.
-+ */
-+static int xhci_fake_doorbell(struct xhci_hcd *xhci, int slot_id)
-+{
-+ u32 temp;
-+
-+ /* Alloc a virt device for that slot */
-+ if (!xhci_alloc_virt_device(xhci, slot_id, NULL, GFP_NOIO)) {
-+ xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n");
-+ return -ENOMEM;
-+ }
-+
-+ /* Ring fake doorbell for slot_id ep 0 */
-+ xhci_ring_ep_doorbell(xhci, slot_id, 0, 0);
-+ usleep_range(1000, 1500);
-+
-+ /* Read the status to check if HSE is set or not */
-+ temp = readl(&xhci->op_regs->status);
-+
-+ /* Clear HSE if set */
-+ if (temp & STS_FATAL) {
-+ xhci_dbg(xhci, "HSE problem detected, status: 0x%08x\n", temp);
-+ temp &= ~0x1fff;
-+ temp |= STS_FATAL;
-+ writel(temp, &xhci->op_regs->status);
-+ usleep_range(1000, 1500);
-+ readl(&xhci->op_regs->status);
-+ }
-+
-+ /* Free virt device */
-+ xhci_free_virt_device(xhci, slot_id);
-+
-+ /* We're done if controller is already running */
-+ if (readl(&xhci->op_regs->command) & CMD_RUN)
-+ return 0;
-+
-+ return xhci_start(xhci);
-+}
-+
- /*
- * Reset a halted HC.
- *
-@@ -603,10 +646,20 @@ static int xhci_init(struct usb_hcd *hcd
-
- static int xhci_run_finished(struct xhci_hcd *xhci)
- {
-- if (xhci_start(xhci)) {
-- xhci_halt(xhci);
-- return -ENODEV;
-+ int err;
-+
-+ err = xhci_start(xhci);
-+ if (err) {
-+ err = -ENODEV;
-+ goto err_halt;
- }
-+
-+ if (xhci->quirks & XHCI_FAKE_DOORBELL) {
-+ err = xhci_fake_doorbell(xhci, 1);
-+ if (err)
-+ goto err_halt;
-+ }
-+
- xhci->shared_hcd->state = HC_STATE_RUNNING;
- xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
-
-@@ -616,6 +669,10 @@ static int xhci_run_finished(struct xhci
- xhci_dbg_trace(xhci, trace_xhci_dbg_init,
- "Finished xhci_run for USB3 roothub");
- return 0;
-+
-+err_halt:
-+ xhci_halt(xhci);
-+ return err;
- }
-
- /*
---- a/drivers/usb/host/xhci.h
-+++ b/drivers/usb/host/xhci.h
-@@ -1872,6 +1872,7 @@ struct xhci_hcd {
- #define XHCI_ZERO_64B_REGS BIT_ULL(32)
- #define XHCI_RESET_PLL_ON_DISCONNECT BIT_ULL(34)
- #define XHCI_SNPS_BROKEN_SUSPEND BIT_ULL(35)
-+#define XHCI_FAKE_DOORBELL BIT_ULL(36)
-
- unsigned int num_active_eps;
- unsigned int limit_active_eps;
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 24 Sep 2014 22:14:07 +0200
-Subject: [PATCH] ARM: BCM5301X: Disable MMU and Dcache during decompression
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Broadcom devices have broken CFE (bootloader) that leaves hardware in an
-invalid state. It causes problems with booting Linux. On Northstar
-devices kernel was randomly hanging in ~25% of tries during early init.
-Hangs used to happen at random places in the start_kernel. On BCM53573
-kernel doesn't even seem to start booting.
-
-To workaround this problem we need to do following very early:
-1) Clear 2 following bits in the SCTLR register:
-#define CR_M (1 << 0) /* MMU enable */
-#define CR_C (1 << 2) /* Dcache enable */
-2) Flush the whole D-cache
-3) Disable L2 cache
-
-Unfortunately this patch is not upstreamable as it does above things
-unconditionally. We can't check if we are running on Broadcom platform
-in any safe way and doing such hacks with ARCH_MULTI_V7 is unacceptable
-as it could break other devices support.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/arch/arm/boot/compressed/Makefile
-+++ b/arch/arm/boot/compressed/Makefile
-@@ -35,6 +35,11 @@ ifeq ($(CONFIG_ARCH_ACORN),y)
- OBJS += ll_char_wr.o font.o
- endif
-
-+ifeq ($(CONFIG_ARCH_BCM_5301X),y)
-+OBJS += head-bcm_5301x-mpcore.o
-+OBJS += cache-v7-min.o
-+endif
-+
- ifeq ($(CONFIG_ARCH_SA1100),y)
- OBJS += head-sa1100.o
- endif
---- /dev/null
-+++ b/arch/arm/boot/compressed/head-bcm_5301x-mpcore.S
-@@ -0,0 +1,37 @@
-+/*
-+ *
-+ * Platform specific tweaks. This is merged into head.S by the linker.
-+ *
-+ */
-+
-+#include <linux/linkage.h>
-+#include <asm/assembler.h>
-+#include <asm/cp15.h>
-+
-+ .section ".start", "ax"
-+
-+/*
-+ * This code section is spliced into the head code by the linker
-+ */
-+
-+__plat_uncompress_start:
-+
-+ @ Preserve r8/r7 i.e. kernel entry values
-+ mov r12, r8
-+
-+ @ Clear MMU enable and Dcache enable bits
-+ mrc p15, 0, r0, c1, c0, 0 @ Read SCTLR
-+ bic r0, #CR_C|CR_M
-+ mcr p15, 0, r0, c1, c0, 0 @ Write SCTLR
-+ nop
-+
-+ @ Call the cache invalidation routine
-+ bl v7_flush_dcache_all
-+ nop
-+ mov r0,#0
-+ ldr r3, =0x19022000 @ L2 cache controller, control reg
-+ str r0, [r3, #0x100] @ Disable L2 cache
-+ nop
-+
-+ @ Restore
-+ mov r8, r12
---- a/arch/arm/boot/compressed/cache-v7-min.S
-+++ b/arch/arm/boot/compressed/cache-v7-min.S
-@@ -12,6 +12,7 @@
-
- #include <linux/linkage.h>
- #include <linux/init.h>
-+#include <asm/assembler.h>
-
- __INIT
-
-@@ -63,7 +64,7 @@ loop2:
- ARM( orr r11, r11, r9, lsl r2 ) @ factor index number into r11
- THUMB( lsl r6, r9, r2 )
- THUMB( orr r11, r11, r6 ) @ factor index number into r11
-- mcr p15, 0, r11, c7, c14, 2 @ clean & invalidate by set/way
-+ mcr p15, 0, r11, c7, c6, 2 @ clean & invalidate by set/way
- subs r9, r9, #1 @ decrement the index
- bge loop2
- subs r4, r4, #1 @ decrement the way
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Subject: [PATCH] ARM: dts: BCM5301X: Update Northstar pinctrl binding
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -400,16 +400,12 @@
- #size-cells = <1>;
-
- cru@100 {
-- compatible = "simple-bus";
-+ compatible = "syscon", "simple-mfd";
- reg = <0x100 0x1a4>;
-- ranges;
-- #address-cells = <1>;
-- #size-cells = <1>;
-
-- pin-controller@1c0 {
-+ pinctrl {
- compatible = "brcm,bcm4708-pinmux";
-- reg = <0x1c0 0x24>;
-- reg-names = "cru_gpio_control";
-+ offset = <0xc0>;
-
- spi-pins {
- groups = "spi_grp";
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Subject: [PATCH] ARM: BCM5301X: Add DT for Netgear R7900
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -104,6 +104,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm4709-buffalo-wxr-1900dhp.dtb \
- bcm4709-linksys-ea9200.dtb \
- bcm4709-netgear-r7000.dtb \
-+ bcm4709-netgear-r7900.dtb \
- bcm4709-netgear-r8000.dtb \
- bcm4709-tplink-archer-c9-v1.dtb \
- bcm47094-dlink-dir-885l.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r7900.dts
-@@ -0,0 +1,42 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * DTS for Netgear R7900
-+ *
-+ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4709.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+
-+/ {
-+ compatible = "netgear,r7900", "brcm,bcm4709", "brcm,bcm4708";
-+ model = "Netgear R7900";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
-+ };
-+
-+ axi@18000000 {
-+ usb3@23000 {
-+ reg = <0x00023000 0x1000>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+};
-+
-+&uart0 {
-+ status = "okay";
-+};
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Subject: [PATCH] ARM: BCM5301X: Add power button for Buffalo WZR-1750DHP
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -101,6 +101,12 @@
- #address-cells = <1>;
- #size-cells = <0>;
-
-+ power {
-+ label = "Power";
-+ linux,code = <KEY_POWER>;
-+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-+ };
-+
- restart {
- label = "Reset";
- linux,code = <KEY_RESTART>;
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Subject: [PATCH] ARM: dts: BCM5301X: Add serial= to the bootargs
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's enough to have proper stdout-path for getting serial working but
-for some reason LEDE doesn't offer "Please press Enter to activate this
-console." unless ttyS0 is specified.
-
-This is a workaround to get serial working in LEDE.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-@@ -12,7 +12,7 @@
- model = "TP-LINK Archer C5 V2";
-
- chosen {
-- bootargs = "earlycon";
-+ bootargs = "console=ttyS0,115200 earlycon";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-@@ -13,7 +13,7 @@
- model = "Luxul ABR-4500 V1";
-
- chosen {
-- bootargs = "earlycon";
-+ bootargs = "console=ttyS0,115200 earlycon";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-@@ -13,7 +13,7 @@
- model = "Luxul XBR-4500 V1";
-
- chosen {
-- bootargs = "earlycon";
-+ bootargs = "console=ttyS0,115200 earlycon";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-@@ -12,7 +12,7 @@
- model = "Luxul XAP-1440 V1";
-
- chosen {
-- bootargs = "earlycon";
-+ bootargs = "console=ttyS0,115200 earlycon";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-@@ -12,7 +12,7 @@
- model = "Luxul XAP-810 V1";
-
- chosen {
-- bootargs = "earlycon";
-+ bootargs = "console=ttyS0,115200 earlycon";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
-@@ -12,7 +12,7 @@
- model = "Luxul XAP-1610 V1";
-
- chosen {
-- bootargs = "earlycon";
-+ bootargs = "console=ttyS0,115200 earlycon";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
-@@ -13,7 +13,7 @@
- model = "Luxul XWR-3150 V1";
-
- chosen {
-- bootargs = "earlycon";
-+ bootargs = "console=ttyS0,115200 earlycon";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
-+++ b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
-@@ -13,6 +13,10 @@
- compatible = "phicomm,k3", "brcm,bcm47094", "brcm,bcm4708";
- model = "Phicomm K3";
-
-+ chosen {
-+ bootargs = "console=ttyS0,115200";
-+ };
-+
- memory {
- reg = <0x00000000 0x08000000
- 0x88000000 0x18000000>;
---- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
-@@ -13,7 +13,7 @@
- model = "Luxul XWC-2000 V1";
-
- chosen {
-- bootargs = "earlycon";
-+ bootargs = "console=ttyS0,115200 earlycon";
- };
-
- memory {
+++ /dev/null
-From 7166207bd1d8c46d09d640d46afc685df9bb9083 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 22 Nov 2018 09:21:49 +0100
-Subject: [PATCH] ARM: dts: BCM5301X: Describe partition formats
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's needed by OpenWrt for custom partitioning.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -34,6 +34,7 @@
- partition@0 {
- label = "firmware";
- reg = <0x00000000 0x08000000>;
-+ compatible = "seama";
- };
- };
- };
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Subject: [PATCH] mtd: spi-nor: detect JEDEC incompatible w25q128 using 0x90
- command
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Some w25q128 chipsets don't support RDID (0x9f) command, they reply with
-0xff-s only. To suppose such flashes fallback to the 0x90 command.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1307,6 +1307,18 @@ static const struct flash_info *spi_nor_
- }
- dev_err(nor->dev, "unrecognized JEDEC id bytes: %02x, %02x, %02x\n",
- id[0], id[1], id[2]);
-+
-+ tmp = nor->read_reg(nor, 0x90, id, SPI_NOR_MAX_ID_LEN);
-+ if (tmp < 0) {
-+ dev_dbg(nor->dev, " error %d reading JEDEC ID\n", tmp);
-+ return ERR_PTR(tmp);
-+ }
-+ dev_info(nor->dev, "using Read Manufacturer / Device ID command (0x%02x) returned %02x %02x\n",
-+ 0x90, id[0x03], id[0x04]);
-+ if (id[0x03] == 0xef && id[0x04] == 0x17) {
-+ return spi_nor_match_id("w25q128");
-+ }
-+
- return ERR_PTR(-ENODEV);
- }
-
+++ /dev/null
-From 2a2af518266a29323cf30c3f9ba9ef2ceb1dd84b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 16 Oct 2014 20:52:16 +0200
-Subject: [PATCH] UBI: Detect EOF mark and erase all remaining blocks
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/mtd/ubi/attach.c | 5 +++++
- drivers/mtd/ubi/io.c | 4 ++++
- drivers/mtd/ubi/ubi.h | 1 +
- 3 files changed, 10 insertions(+)
-
---- a/drivers/mtd/ubi/attach.c
-+++ b/drivers/mtd/ubi/attach.c
-@@ -95,6 +95,9 @@ static int self_check_ai(struct ubi_devi
- #define AV_ADD BIT(1)
- #define AV_FIND_OR_ADD (AV_FIND | AV_ADD)
-
-+/* Set on finding block with 0xdeadc0de, indicates erasing all blocks behind */
-+bool erase_all_next;
-+
- /**
- * find_or_add_av - internal function to find a volume, add a volume or do
- * both (find and add if missing).
-@@ -1592,6 +1595,8 @@ int ubi_attach(struct ubi_device *ubi, i
- if (!ai)
- return -ENOMEM;
-
-+ erase_all_next = false;
-+
- #ifdef CONFIG_MTD_UBI_FASTMAP
- /* On small flash devices we disable fastmap in any case. */
- if ((int)mtd_div_by_eb(ubi->mtd->size, ubi->mtd) <= UBI_FM_MAX_START) {
---- a/drivers/mtd/ubi/io.c
-+++ b/drivers/mtd/ubi/io.c
-@@ -723,6 +723,10 @@ int ubi_io_read_ec_hdr(struct ubi_device
- }
-
- magic = be32_to_cpu(ec_hdr->magic);
-+ if (magic == 0xdeadc0de)
-+ erase_all_next = true;
-+ if (erase_all_next)
-+ return read_err ? UBI_IO_FF_BITFLIPS : UBI_IO_FF;
- if (magic != UBI_EC_HDR_MAGIC) {
- if (mtd_is_eccerr(read_err))
- return UBI_IO_BAD_HDR_EBADMSG;
---- a/drivers/mtd/ubi/ubi.h
-+++ b/drivers/mtd/ubi/ubi.h
-@@ -833,6 +833,7 @@ extern struct mutex ubi_devices_mutex;
- extern struct blocking_notifier_head ubi_notifiers;
-
- /* attach.c */
-+extern bool erase_all_next;
- struct ubi_ainf_peb *ubi_alloc_aeb(struct ubi_attach_info *ai, int pnum,
- int ec);
- void ubi_free_aeb(struct ubi_attach_info *ai, struct ubi_ainf_peb *aeb);
+++ /dev/null
-From 4abdde3ad6bc0b3b157c4bf6ec0bf139d11d07e8 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 13 May 2015 14:13:28 +0200
-Subject: [PATCH] b53: add hacky CPU port fixes for devices not using port 5
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/net/phy/b53/b53_common.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/drivers/net/phy/b53/b53_common.c
-+++ b/drivers/net/phy/b53/b53_common.c
-@@ -28,6 +28,7 @@
- #include <linux/of.h>
- #include <linux/of_net.h>
- #include <linux/platform_data/b53.h>
-+#include <linux/of.h>
-
- #include "b53_regs.h"
- #include "b53_priv.h"
-@@ -1587,6 +1588,28 @@ static int b53_switch_init(struct b53_de
- return ret;
- }
-
-+ /* Set correct CPU port */
-+ if (of_machine_is_compatible("asus,rt-ac87u"))
-+ sw_dev->cpu_port = 7;
-+ else if (of_machine_is_compatible("netgear,r7900"))
-+ sw_dev->cpu_port = 8;
-+ else if (of_machine_is_compatible("netgear,r8000"))
-+ sw_dev->cpu_port = 8;
-+ else if (of_machine_is_compatible("netgear,r8500"))
-+ sw_dev->cpu_port = 8;
-+
-+ /* Enable extra ports */
-+ if (of_machine_is_compatible("tenda,ac9"))
-+ dev->enabled_ports |= BIT(5);
-+
-+ /*
-+ * Workaround for devices using port 8 (connected to the 3rd iface).
-+ * For some reason it doesn't work (no packets on eth2).
-+ */
-+ if (of_machine_is_compatible("netgear,r7900") ||
-+ of_machine_is_compatible("netgear,r8000"))
-+ sw_dev->cpu_port = 5;
-+
- dev->enabled_ports |= BIT(sw_dev->cpu_port);
- sw_dev->ports = fls(dev->enabled_ports);
-
+++ /dev/null
-From 6f1c62440eb6846cb8045d7a5480ec7bbe47c96f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 15 Aug 2016 10:30:41 +0200
-Subject: [PATCH] BCM53573 minor hacks
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/arch/arm/boot/dts/bcm53573.dtsi
-+++ b/arch/arm/boot/dts/bcm53573.dtsi
-@@ -53,6 +53,7 @@
- <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
- <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
- <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
-+ clocks = <&ilp>;
- };
-
- clocks {
---- a/drivers/bcma/main.c
-+++ b/drivers/bcma/main.c
-@@ -330,14 +330,6 @@ static int bcma_register_devices(struct
- }
- #endif
-
--#ifdef CONFIG_BCMA_SFLASH
-- if (bus->drv_cc.sflash.present) {
-- err = platform_device_register(&bcma_sflash_dev);
-- if (err)
-- bcma_err(bus, "Error registering serial flash\n");
-- }
--#endif
--
- #ifdef CONFIG_BCMA_NFLASH
- if (bus->drv_cc.nflash.present) {
- err = platform_device_register(&bcma_nflash_dev);
-@@ -415,6 +407,14 @@ int bcma_bus_register(struct bcma_bus *b
- bcma_register_core(bus, core);
- }
-
-+#ifdef CONFIG_BCMA_SFLASH
-+ if (bus->drv_cc.sflash.present) {
-+ err = platform_device_register(&bcma_sflash_dev);
-+ if (err)
-+ bcma_err(bus, "Error registering serial flash\n");
-+ }
-+#endif
-+
- /* Try to get SPROM */
- err = bcma_sprom_get(bus);
- if (err == -ENOENT) {
---- a/drivers/clocksource/arm_arch_timer.c
-+++ b/drivers/clocksource/arm_arch_timer.c
-@@ -17,6 +17,7 @@
- #include <linux/smp.h>
- #include <linux/cpu.h>
- #include <linux/cpu_pm.h>
-+#include <linux/clk.h>
- #include <linux/clockchips.h>
- #include <linux/clocksource.h>
- #include <linux/interrupt.h>
-@@ -919,6 +920,16 @@ static void arch_timer_of_configure_rate
- if (of_property_read_u32(np, "clock-frequency", &arch_timer_rate))
- arch_timer_rate = rate;
-
-+ /* Get clk rate through clk driver if present */
-+ if (!arch_timer_rate) {
-+ struct clk *clk = of_clk_get(np, 0);
-+
-+ if (!IS_ERR(clk)) {
-+ if (!clk_prepare_enable(clk))
-+ arch_timer_rate = clk_get_rate(clk);
-+ }
-+ }
-+
- /* Check the timer frequency. */
- if (arch_timer_rate == 0)
- pr_warn("frequency not available\n");
+++ /dev/null
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_AMBA_PL08X=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_GEMINI=y
-CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_KCOV=y
-CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
-CONFIG_ARCH_HAS_PHYS_TO_DMA=y
-CONFIG_ARCH_HAS_RESET_CONTROLLER=y
-CONFIG_ARCH_HAS_SET_MEMORY=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
-CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-# CONFIG_ARCH_MOXART is not set
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V4=y
-# CONFIG_ARCH_MULTI_V4T is not set
-CONFIG_ARCH_MULTI_V4_V5=y
-# CONFIG_ARCH_MULTI_V5 is not set
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARM=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_APPENDED_DTB=y
-# CONFIG_ARM_ATAG_DTB_COMPAT is not set
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-# CONFIG_ARM_SMMU is not set
-# CONFIG_ARM_SP805_WATCHDOG is not set
-CONFIG_ARM_UNWIND=y
-CONFIG_ATA=y
-CONFIG_ATAGS=y
-CONFIG_ATA_VERBOSE_ERROR=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BOUNCE=y
-# CONFIG_BPF_SYSCALL is not set
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMA=y
-CONFIG_CMA_ALIGNMENT=8
-CONFIG_CMA_AREAS=7
-# CONFIG_CMA_DEBUG is not set
-# CONFIG_CMA_DEBUGFS is not set
-CONFIG_CMA_SIZE_MBYTES=16
-# CONFIG_CMA_SIZE_SEL_MAX is not set
-CONFIG_CMA_SIZE_SEL_MBYTES=y
-# CONFIG_CMA_SIZE_SEL_MIN is not set
-# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_GEMINI=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_COREDUMP=y
-CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
-CONFIG_CPU_32v4=y
-CONFIG_CPU_ABRT_EV4=y
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_FA=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_FA=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-CONFIG_CPU_FA526=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_NO_EFFICIENT_FFS=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_TLB_FA=y
-CONFIG_CPU_USE_DOMAINS=y
-CONFIG_CRASH_CORE=y
-CONFIG_CRC16=y
-# CONFIG_CRC32_SARWATE is not set
-CONFIG_CRC32_SLICEBY8=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CROSS_MEMORY_ATTACH=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_CCM=y
-CONFIG_CRYPTO_CMAC=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CTR=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_DRBG=y
-CONFIG_CRYPTO_DRBG_HMAC=y
-CONFIG_CRYPTO_DRBG_MENU=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_ECHAINIV=y
-CONFIG_CRYPTO_GCM=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_GHASH=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_JITTERENTROPY=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_MD4=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_RNG_DEFAULT=y
-CONFIG_CRYPTO_SEQIV=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_USER is not set
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_LZ4=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_DECOMPRESS_XZ=y
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_DMADEVICES=y
-CONFIG_DMATEST=y
-CONFIG_DMA_CMA=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_ENGINE_RAID=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_DRM=y
-CONFIG_DRM_BRIDGE=y
-# CONFIG_DRM_CDNS_DSI is not set
-# CONFIG_DRM_DEBUG_SELFTEST is not set
-CONFIG_DRM_FBDEV_EMULATION=y
-CONFIG_DRM_GEM_CMA_HELPER=y
-# CONFIG_DRM_I2C_NXP_TDA9950 is not set
-CONFIG_DRM_KMS_CMA_HELPER=y
-CONFIG_DRM_KMS_FB_HELPER=y
-CONFIG_DRM_KMS_HELPER=y
-CONFIG_DRM_PANEL=y
-# CONFIG_DRM_PANEL_ARM_VERSATILE is not set
-CONFIG_DRM_PANEL_BRIDGE=y
-CONFIG_DRM_PANEL_ILITEK_IL9322=y
-CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
-# CONFIG_DRM_RCAR_LVDS is not set
-# CONFIG_DRM_SII9234 is not set
-# CONFIG_DRM_THINE_THC63LVD1024 is not set
-CONFIG_DRM_TVE200=y
-# CONFIG_DRM_VKMS is not set
-CONFIG_DTC=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EEPROM_93CX6=y
-CONFIG_ELF_CORE=y
-# CONFIG_EMBEDDED is not set
-# CONFIG_EXPERT is not set
-CONFIG_EXT4_FS=y
-CONFIG_FARADAY_FTINTC010=y
-CONFIG_FB=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_CMDLINE=y
-CONFIG_FB_DEFERRED_IO=y
-CONFIG_FB_SYS_COPYAREA=y
-CONFIG_FB_SYS_FILLRECT=y
-CONFIG_FB_SYS_FOPS=y
-CONFIG_FB_SYS_IMAGEBLIT=y
-CONFIG_FHANDLE=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x16=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_SUPPORT=y
-# CONFIG_FPE_FASTFPE is not set
-# CONFIG_FPE_NWFPE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FTTMR010_TIMER=y
-CONFIG_FTWDT010_WATCHDOG=y
-# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
-CONFIG_GEMINI_ETHERNET=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_FTGPIO010=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
-CONFIG_HAVE_EBPF_JIT=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_RSEQ=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HDMI=y
-CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
-CONFIG_HWMON=y
-CONFIG_HW_CONSOLE=y
-CONFIG_HZ_FIXED=0
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-CONFIG_I2C_GPIO=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=y
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_IOMMU_DEBUGFS is not set
-# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
-# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
-CONFIG_IOMMU_SUPPORT=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_IPC_NS=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-# CONFIG_ISDN is not set
-CONFIG_JBD2=y
-CONFIG_KALLSYMS=y
-CONFIG_KERNEL_LZMA=y
-# CONFIG_KERNEL_XZ is not set
-CONFIG_KEXEC=y
-CONFIG_KEXEC_CORE=y
-CONFIG_KEYBOARD_DLINK_DIR685=y
-# CONFIG_LDM_DEBUG is not set
-CONFIG_LDM_PARTITION=y
-CONFIG_LEDS_TRIGGER_DISK=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_LOGO_LINUX_MONO is not set
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LZ4_DECOMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MANDATORY_FILE_LOCKING=y
-CONFIG_MARVELL_PHY=y
-CONFIG_MDIO_BITBANG=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_GPIO=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MEMORY_ISOLATION=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MIGRATION=y
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MODULE_UNLOAD is not set
-CONFIG_MQ_IOSCHED_DEADLINE=y
-CONFIG_MQ_IOSCHED_KYBER=y
-CONFIG_MTD_CFI_STAA=y
-# CONFIG_MTD_IMPA7 is not set
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_OF_GEMINI=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_WRGG_FW=y
-CONFIG_NAMESPACES=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_KUSER_HELPERS=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_REALTEK_SMI=y
-CONFIG_NET_DSA_VITESSE_VSC73XX=y
-CONFIG_NET_NS=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NLS=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NVMEM=y
-CONFIG_OABI_COMPAT=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PANIC_ON_OOPS is not set
-CONFIG_PANIC_ON_OOPS_VALUE=0
-CONFIG_PANIC_TIMEOUT=0
-CONFIG_PATA_FTIDE010=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_FTPCI100=y
-# CONFIG_PCI_V3_SEMI is not set
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-CONFIG_PID_NS=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_GEMINI=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_GEMINI_POWEROFF=y
-CONFIG_POWER_RESET_SYSCON=y
-CONFIG_PREEMPT=y
-CONFIG_PREEMPT_COUNT=y
-# CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_RCU=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_RATIONAL=y
-CONFIG_RCU_CPU_STALL_TIMEOUT=21
-# CONFIG_RCU_EXPERT is not set
-CONFIG_RCU_NEED_SEGCBLIST=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_GZIP=y
-CONFIG_RD_LZ4=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
-CONFIG_RD_XZ=y
-CONFIG_REALTEK_PHY=y
-CONFIG_REFCOUNT_FULL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_RELAY=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RSEQ=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_DRV_CMOS is not set
-CONFIG_RTC_DRV_FTRTC010=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RTC_NVMEM=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SATA_GEMINI=y
-CONFIG_SATA_PMP=y
-CONFIG_SCSI=y
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_SENSORS_GPIO_FAN=y
-CONFIG_SENSORS_LM75=y
-CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
-CONFIG_SERIAL_8250_EXAR=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIO=y
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SG_POOL=y
-CONFIG_SLUB_DEBUG=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-CONFIG_SRCU=y
-# CONFIG_STAGING is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_SWPHY=y
-CONFIG_SYNC_FILE=y
-CONFIG_SYSFS_SYSCALL=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_TASKS_RCU=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_HWMON=y
-CONFIG_THERMAL_OF=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_TREE_SRCU=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNINLINE_SPIN_UNLOCK=y
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_ROLE_SWITCH is not set
-# CONFIG_USERIO is not set
-CONFIG_USER_NS=y
-CONFIG_USE_OF=y
-CONFIG_UTS_NS=y
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-CONFIG_VITESSE_PHY=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_SPARC=y
-CONFIG_XZ_DEC_X86=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZLIB_INFLATE=y
+++ /dev/null
-From 5d1bd9669ddcd26384672891c37110046e1ac8e8 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Tue, 9 Oct 2018 10:12:24 +0200
-Subject: [PATCH 03/18] pinctrl: gemini: Drop noisy debug prints
-
-The dev_info() in the pin control driver is really just good
-for debug, so drop it.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/pinctrl-gemini.c | 32 ++++++++++++++++----------------
- 1 file changed, 16 insertions(+), 16 deletions(-)
-
---- a/drivers/pinctrl/pinctrl-gemini.c
-+++ b/drivers/pinctrl/pinctrl-gemini.c
-@@ -2207,9 +2207,9 @@ static int gemini_pmx_set_mux(struct pin
- return -ENODEV;
- }
-
-- dev_info(pmx->dev,
-- "ACTIVATE function \"%s\" with group \"%s\"\n",
-- func->name, grp->name);
-+ dev_dbg(pmx->dev,
-+ "ACTIVATE function \"%s\" with group \"%s\"\n",
-+ func->name, grp->name);
-
- regmap_read(pmx->map, GLOBAL_MISC_CTRL, &before);
- regmap_update_bits(pmx->map, GLOBAL_MISC_CTRL,
-@@ -2240,10 +2240,10 @@ static int gemini_pmx_set_mux(struct pin
- "GLOBAL MISC CTRL before: %08x, after %08x, expected %08x\n",
- before, after, expected);
- } else {
-- dev_info(pmx->dev,
-- "padgroup %s %s\n",
-- gemini_padgroups[i],
-- enabled ? "enabled" : "disabled");
-+ dev_dbg(pmx->dev,
-+ "padgroup %s %s\n",
-+ gemini_padgroups[i],
-+ enabled ? "enabled" : "disabled");
- }
- }
-
-@@ -2262,10 +2262,10 @@ static int gemini_pmx_set_mux(struct pin
- "GLOBAL MISC CTRL before: %08x, after %08x, expected %08x\n",
- before, after, expected);
- } else {
-- dev_info(pmx->dev,
-- "padgroup %s %s\n",
-- gemini_padgroups[i],
-- enabled ? "enabled" : "disabled");
-+ dev_dbg(pmx->dev,
-+ "padgroup %s %s\n",
-+ gemini_padgroups[i],
-+ enabled ? "enabled" : "disabled");
- }
- }
-
-@@ -2492,9 +2492,9 @@ static int gemini_pinconf_group_set(stru
- regmap_update_bits(pmx->map, GLOBAL_IODRIVE,
- grp->driving_mask,
- val);
-- dev_info(pmx->dev,
-- "set group %s to %d mA drive strength mask %08x val %08x\n",
-- grp->name, arg, grp->driving_mask, val);
-+ dev_dbg(pmx->dev,
-+ "set group %s to %d mA drive strength mask %08x val %08x\n",
-+ grp->name, arg, grp->driving_mask, val);
- break;
- default:
- dev_err(pmx->dev, "invalid config param %04x\n", param);
-@@ -2585,8 +2585,8 @@ static int gemini_pmx_probe(struct platf
- /* Print initial state */
- tmp = val;
- for_each_set_bit(i, &tmp, PADS_MAXBIT) {
-- dev_info(dev, "pad group %s %s\n", gemini_padgroups[i],
-- (val & BIT(i)) ? "enabled" : "disabled");
-+ dev_dbg(dev, "pad group %s %s\n", gemini_padgroups[i],
-+ (val & BIT(i)) ? "enabled" : "disabled");
- }
-
- /* Check if flash pin is set */
+++ /dev/null
-From 58ecb60d53d43e8d584708722a2cf851ba88f9e1 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Thu, 11 Oct 2018 19:53:40 +0200
-Subject: [PATCH 05/18] mtd: physmap_of: Move custom initialization
-
-In order to be able to assign custom complex mappings
-to the physmap_of plugin for Gemini, move the initialization
-so that the simple map is initialized before we enter the
-platform-specific functions so the latter can override
-them.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/mtd/maps/physmap_of_core.c | 15 ++++++++-------
- 1 file changed, 8 insertions(+), 7 deletions(-)
-
---- a/drivers/mtd/maps/physmap_of_core.c
-+++ b/drivers/mtd/maps/physmap_of_core.c
-@@ -231,6 +231,9 @@ static int of_flash_probe(struct platfor
- else if (of_property_read_bool(dp, "little-endian"))
- info->list[i].map.swap = CFI_LITTLE_ENDIAN;
-
-+ simple_map_init(&info->list[i].map);
-+
-+ /* Variants can override map accessors */
- err = of_flash_probe_gemini(dev, dp, &info->list[i].map);
- if (err)
- goto err_out;
-@@ -238,8 +241,6 @@ static int of_flash_probe(struct platfor
- if (err)
- goto err_out;
-
-- simple_map_init(&info->list[i].map);
--
- /*
- * On some platforms (e.g. MPC5200) a direct 1:1 mapping
- * may cause problems with JFFS2 usage, as the local bus (LPB)
+++ /dev/null
-From 8e5e628a9de439d02914b85a48e1ac3e04ea486a Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Thu, 11 Oct 2018 20:03:49 +0200
-Subject: [PATCH 06/18] mtd: physmap_of_gemini: Handle pin control
-
-This enables the complex mapping for the Gemini and kicks in
-custom read/write functions that will wrap the existing
-simple functions in calls to enable/disable the parallel
-flash pins using pin controls.
-
-This is necessary on some hardware such as the D-Link
-DIR-685 where all flash pins are patched in/out at the same
-time, but some of the flash pins are in practice unused by
-the flash and have anyway been reused as GPIO.
-
-This concerns specifically CE1 on the Gemini. There is only
-one flash chip, so only CE0 is used, and the line for CE1
-has been reused as chip select for the emulated SPI port
-connected to the display. If we try to use the same lines
-for flash and GPIO at the same time, one of them will loose:
-the GPIO line will disappear because it gets disconnected
-from the pin when the flash group is muxed out.
-
-Fix this by introducing two pin control states named simply
-"enabled" and "disabled" and only enable the flash lines
-when absolutely necessary (during read/write/copy). This
-way, they are available for GPIO at all other times and
-the display works.
-
-Collect all the state variables in a struct named
-struct gemini_flash and allocate this struct at probe
-time.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/mtd/maps/Kconfig | 1 +
- drivers/mtd/maps/physmap_of_gemini.c | 105 ++++++++++++++++++++++++++-
- 2 files changed, 105 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -89,6 +89,7 @@ config MTD_PHYSMAP_OF_GEMINI
- depends on MTD_PHYSMAP_OF
- depends on MFD_SYSCON
- default ARCH_GEMINI
-+ select MTD_COMPLEX_MAPPINGS
- help
- This provides some extra DT physmap parsing for the Gemini
- platforms, some detection and setting up parallel mode on the
---- a/drivers/mtd/maps/physmap_of_gemini.c
-+++ b/drivers/mtd/maps/physmap_of_gemini.c
-@@ -10,9 +10,11 @@
- #include <linux/of.h>
- #include <linux/of_device.h>
- #include <linux/mtd/map.h>
-+#include <linux/mtd/xip.h>
- #include <linux/mfd/syscon.h>
- #include <linux/regmap.h>
- #include <linux/bitops.h>
-+#include <linux/pinctrl/consumer.h>
- #include "physmap_of_gemini.h"
-
- /*
-@@ -49,6 +51,77 @@ static const struct of_device_id syscon_
- { },
- };
-
-+struct gemini_flash {
-+ struct device *dev;
-+ struct pinctrl *p;
-+ struct pinctrl_state *enabled_state;
-+ struct pinctrl_state *disabled_state;
-+};
-+
-+/* Static local state */
-+static struct gemini_flash *gf;
-+
-+static void gemini_flash_enable_pins(void)
-+{
-+ int ret;
-+
-+ if (IS_ERR(gf->enabled_state))
-+ return;
-+ ret = pinctrl_select_state(gf->p, gf->enabled_state);
-+ if (ret)
-+ dev_err(gf->dev, "failed to enable pins\n");
-+}
-+
-+static void gemini_flash_disable_pins(void)
-+{
-+ int ret;
-+
-+ if (IS_ERR(gf->disabled_state))
-+ return;
-+ ret = pinctrl_select_state(gf->p, gf->disabled_state);
-+ if (ret)
-+ dev_err(gf->dev, "failed to disable pins\n");
-+}
-+
-+static map_word __xipram gemini_flash_map_read(struct map_info *map,
-+ unsigned long ofs)
-+{
-+ map_word __xipram ret;
-+
-+ gemini_flash_enable_pins();
-+ ret = inline_map_read(map, ofs);
-+ gemini_flash_disable_pins();
-+
-+ return ret;
-+}
-+
-+static void __xipram gemini_flash_map_write(struct map_info *map,
-+ const map_word datum,
-+ unsigned long ofs)
-+{
-+ gemini_flash_enable_pins();
-+ inline_map_write(map, datum, ofs);
-+ gemini_flash_disable_pins();
-+}
-+
-+static void __xipram gemini_flash_map_copy_from(struct map_info *map,
-+ void *to, unsigned long from,
-+ ssize_t len)
-+{
-+ gemini_flash_enable_pins();
-+ inline_map_copy_from(map, to, from, len);
-+ gemini_flash_disable_pins();
-+}
-+
-+static void __xipram gemini_flash_map_copy_to(struct map_info *map,
-+ unsigned long to,
-+ const void *from, ssize_t len)
-+{
-+ gemini_flash_enable_pins();
-+ inline_map_copy_to(map, to, from, len);
-+ gemini_flash_disable_pins();
-+}
-+
- int of_flash_probe_gemini(struct platform_device *pdev,
- struct device_node *np,
- struct map_info *map)
-@@ -62,6 +135,11 @@ int of_flash_probe_gemini(struct platfor
- if (!of_device_is_compatible(np, "cortina,gemini-flash"))
- return 0;
-
-+ gf = devm_kzalloc(dev, sizeof(*gf), GFP_KERNEL);
-+ if (!gf)
-+ return -ENOMEM;
-+ gf->dev = dev;
-+
- rmap = syscon_regmap_lookup_by_phandle(np, "syscon");
- if (IS_ERR(rmap)) {
- dev_err(dev, "no syscon\n");
-@@ -96,7 +174,32 @@ int of_flash_probe_gemini(struct platfor
- map->bankwidth * 8);
- }
-
-- dev_info(&pdev->dev, "initialized Gemini-specific physmap control\n");
-+ gf->p = devm_pinctrl_get(dev);
-+ if (IS_ERR(gf->p)) {
-+ dev_err(dev, "no pinctrl handle\n");
-+ ret = PTR_ERR(gf->p);
-+ return ret;
-+ }
-+
-+ gf->enabled_state = pinctrl_lookup_state(gf->p, "enabled");
-+ if (IS_ERR(gf->enabled_state))
-+ dev_err(dev, "no enabled pin control state\n");
-+
-+ gf->disabled_state = pinctrl_lookup_state(gf->p, "disabled");
-+ if (IS_ERR(gf->enabled_state)) {
-+ dev_err(dev, "no disabled pin control state\n");
-+ } else {
-+ ret = pinctrl_select_state(gf->p, gf->disabled_state);
-+ if (ret)
-+ dev_err(gf->dev, "failed to disable pins\n");
-+ }
-+
-+ map->read = gemini_flash_map_read;
-+ map->write = gemini_flash_map_write;
-+ map->copy_from = gemini_flash_map_copy_from;
-+ map->copy_to = gemini_flash_map_copy_to;
-+
-+ dev_info(dev, "initialized Gemini-specific physmap control\n");
-
- return 0;
- }
+++ /dev/null
-From 928681e6b46cb70317f7721aae8435ea89fcfd80 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Thu, 11 Oct 2018 20:06:23 +0200
-Subject: [PATCH] ARM: dts: Enable Gemini flash access
-
-Some Gemini platforms have a parallel NOR flash which conflicts
-with use cases reusing some of the flash lines (such as CE1)
-for GPIO.
-
-Fix this on the D-Link DIR-685 and Itian SQ201 by creating
-"enabled" and "disabled" states for the flash pin control
-handle, and rely on the flash handling code to switch this
-in and out when accessed so these lines can be used
-for GPIO when flash is not accessed, and enable flash
-access.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- arch/arm/boot/dts/gemini-dlink-dir-685.dts | 33 +++++++++++++++-------
- arch/arm/boot/dts/gemini-sq201.dts | 31 +++++++++++---------
- 2 files changed, 40 insertions(+), 24 deletions(-)
-
---- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-@@ -64,7 +64,6 @@
- gpio-sck = <&gpio1 5 GPIO_ACTIVE_HIGH>;
- gpio-miso = <&gpio1 8 GPIO_ACTIVE_HIGH>;
- gpio-mosi = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-- /* Collides with pflash CE1, not so cool */
- cs-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
- num-chipselects = <1>;
-
-@@ -253,15 +252,18 @@
- soc {
- flash@30000000 {
- /*
-- * Flash access is by default disabled, because it
-- * collides with the Chip Enable signal for the display
-- * panel, that reuse the parallel flash Chip Select 1
-- * (CS1). Enabling flash makes graphics stop working.
-- *
-- * We might be able to hack around this by letting
-- * GPIO poke around in the flash controller registers.
-+ * Flash access collides with the Chip Enable signal for
-+ * the display panel, that reuse the parallel flash Chip
-+ * Select 1 (CS1). We switch the pin control state so we
-+ * enable these pins for flash access only when we need
-+ * then, and when disabled they can be used for GPIO which
-+ * is what the display panel needs.
- */
-- /* status = "okay"; */
-+ status = "okay";
-+ pinctrl-names = "enabled", "disabled";
-+ pinctrl-0 = <&pflash_default_pins>;
-+ pinctrl-1 = <&pflash_disabled_pins>;
-+
- /* 32MB of flash */
- reg = <0x30000000 0x02000000>;
-
-@@ -327,7 +329,6 @@
- "gpio0cgrp",
- "gpio0egrp",
- "gpio0fgrp",
-- "gpio0ggrp",
- "gpio0hgrp";
- };
- };
-@@ -342,6 +343,18 @@
- groups = "gpio1bgrp";
- };
- };
-+ /*
-+ * These GPIO groups will be mapped in over some
-+ * of the flash pins when the flash is not in
-+ * active use.
-+ */
-+ pflash_disabled_pins: pinctrl-pflash-disabled {
-+ mux {
-+ function = "gpio0";
-+ groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
-+ "gpio0kgrp";
-+ };
-+ };
- pinctrl-gmii {
- mux {
- function = "gmii";
---- a/arch/arm/boot/dts/gemini-sq201.dts
-+++ b/arch/arm/boot/dts/gemini-sq201.dts
-@@ -41,14 +41,12 @@
- compatible = "gpio-leds";
- led-green-info {
- label = "sq201:green:info";
-- /* Conflict with parallel flash */
- gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- linux,default-trigger = "heartbeat";
- };
- led-green-usb {
- label = "sq201:green:usb";
-- /* Conflict with parallel and NAND flash */
- gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- linux,default-trigger = "usb-host";
-@@ -126,15 +124,10 @@
-
- soc {
- flash@30000000 {
-- /*
-- * Flash access can be enabled, with the side effect
-- * of disabling access to GPIO LED on GPIO0[20] which
-- * reuse one of the parallel flash chip select lines.
-- * Also the default firmware on the machine has the
-- * problem that since it uses the flash, the two LEDS
-- * on the right become numb.
-- */
-- /* status = "okay"; */
-+ status = "okay";
-+ pinctrl-names = "enabled", "disabled";
-+ pinctrl-0 = <&pflash_default_pins>;
-+ pinctrl-1 = <&pflash_disabled_pins>;
- /* 16MB of flash */
- reg = <0x30000000 0x01000000>;
-
-@@ -157,9 +150,7 @@
- mux {
- function = "gpio0";
- groups = "gpio0fgrp",
-- "gpio0ggrp",
-- "gpio0hgrp",
-- "gpio0kgrp";
-+ "gpio0hgrp";
- };
- };
- /*
-@@ -172,6 +163,18 @@
- groups = "gpio1dgrp";
- };
- };
-+ /*
-+ * These GPIO groups will be mapped in over some
-+ * of the flash pins when the flash is not in
-+ * active use.
-+ */
-+ pflash_disabled_pins: pinctrl-pflash-disabled {
-+ mux {
-+ function = "gpio0";
-+ groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
-+ "gpio0kgrp";
-+ };
-+ };
- pinctrl-gmii {
- mux {
- function = "gmii";
+++ /dev/null
-From 3dfe7ff875a64b83de21dad6365225f41f3cdb17 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Fri, 19 Oct 2018 08:22:18 +0200
-Subject: [PATCH 09/18] mtd: partitions: Add RedBoot FIS DT bindings
-
-This adds device tree bindings for the RedBoot FIS partition
-format.
-
-Cc: devicetree@vger.kernel.org
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- .../bindings/mtd/partitions/redboot-fis.txt | 27 +++++++++++++++++++
- 1 file changed, 27 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/mtd/partitions/redboot-fis.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/mtd/partitions/redboot-fis.txt
-@@ -0,0 +1,27 @@
-+RedBoot FLASH Image System (FIS) Partitions
-+===========================================
-+
-+The FLASH Image System (FIS) directory is a flash description
-+format closely associated with the RedBoot boot loader.
-+
-+It uses one single flash eraseblock in the flash to store an index of
-+all images in the flash.
-+
-+This block size will vary depending on flash but is typically
-+32 KB in size.
-+
-+Required properties:
-+- compatible : (required) must be "redboot-fis"
-+- fis-index-block : (required) a index to the eraseblock containing
-+ the FIS directory on this device. On a flash memory with 32KB
-+ eraseblocks, 0 means the first eraseblock at 0x00000000, 1 means the
-+ second eraseblock at 0x00008000 and so on.
-+
-+Example:
-+
-+flash@0 {
-+ partitions {
-+ compatible = "redboot-fis";
-+ fis-index-block = <0>;
-+ };
-+};
+++ /dev/null
-From e1b9d122030220d8b8176d9e23568e26fa2f9d23 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Fri, 19 Oct 2018 08:56:41 +0200
-Subject: [PATCH 10/18] mtd: partitions: Add second compatible for redboot
-
-Simple backport of the upstream redboot partition table
-bindings that are used in the mainline Linux kernel.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/mtd/redboot.c | 29 ++++++++++++++++++++++++++++-
- 1 file changed, 28 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -25,7 +25,7 @@
- #include <linux/slab.h>
- #include <linux/init.h>
- #include <linux/vmalloc.h>
--
-+#include <linux/of.h>
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
- #include <linux/module.h>
-@@ -56,6 +56,31 @@ static inline int redboot_checksum(struc
- return 1;
- }
-
-+#ifdef CONFIG_OF
-+static void parse_redboot_of(struct mtd_info *master)
-+{
-+ struct device_node *np;
-+ u32 dirblock;
-+ int ret;
-+
-+ np = mtd_get_of_node(master);
-+ if (!np)
-+ return;
-+ ret = of_property_read_u32(np, "fis-index-block", &dirblock);
-+ if (ret)
-+ return;
-+ /*
-+ * Assign the block found in the device tree to the local
-+ * directory block pointer.
-+ */
-+ directory = dirblock;
-+}
-+#else
-+static void parse_redboot_of(struct mtd_info *master)
-+{
-+}
-+#endif
-+
- static int parse_redboot_partitions(struct mtd_info *master,
- const struct mtd_partition **pparts,
- struct mtd_part_parser_data *data)
-@@ -75,6 +100,7 @@ static int parse_redboot_partitions(stru
- #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
- static char nullstring[] = "unallocated";
- #endif
-+ parse_redboot_of(master);
-
- if ( directory < 0 ) {
- offset = master->size + directory * master->erasesize;
-@@ -298,6 +324,7 @@ static int parse_redboot_partitions(stru
-
- static const struct of_device_id redboot_parser_of_match_table[] = {
- { .compatible = "ecoscentric,redboot-fis-partitions" },
-+ { .compatible = "redboot-fis" },
- {},
- };
- MODULE_DEVICE_TABLE(of, redboot_parser_of_match_table);
+++ /dev/null
-From 186692e51e6c40d8ebd05d25f009098eb00f8110 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Fri, 19 Oct 2018 09:00:51 +0200
-Subject: [PATCH 11/18] ARM: dts: Fix up SQ201 flash access
-
-This sets the partition information on the SQ201 to be read
-out from the RedBoot partition table, removes the static
-partition table and sets our boot options to mount root from
-/dev/mtdblock2 where the initramfs resides.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- arch/arm/boot/dts/gemini-sq201.dts | 37 ++++--------------------------
- 1 file changed, 5 insertions(+), 32 deletions(-)
-
---- a/arch/arm/boot/dts/gemini-sq201.dts
-+++ b/arch/arm/boot/dts/gemini-sq201.dts
-@@ -20,7 +20,7 @@
- };
-
- chosen {
-- bootargs = "console=ttyS0,115200n8 root=/dev/mtdblock2 rw rootfstype=squashfs,jffs2 rootwait";
-+ bootargs = "console=ttyS0,115200n8 root=/dev/mtdblock3 rw rootfstype=squashfs,jffs2 rootwait";
- stdout-path = &uart0;
- };
-
+++ /dev/null
-From ec8b953c92c1dd0e0f1450f4b9a32c60125d4510 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Mon, 27 Aug 2018 00:10:39 +0200
-Subject: [PATCH 12/18] ARM: dts: Blank D-Link DIR-685 console
-
-Leaving this NAS with display and backlight on heats it up
-and dissipates power. Turn off the screen after 4 minutes,
-it comes back on when a user touches the keys.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- arch/arm/boot/dts/gemini-dlink-dir-685.dts | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-@@ -20,7 +20,7 @@
- };
-
- chosen {
-- bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait";
-+ bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait consoleblank=300";
- stdout-path = "uart0:19200n8";
- };
-
+++ /dev/null
-From e76906e8e9dfaeeb22a37706aca493b86e4367bd Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Fri, 21 Apr 2017 20:46:12 +0200
-Subject: [PATCH 13/18] usb: host: fotg2: add silicon clock handling
-
-When used in a system with software-controlled silicon clocks,
-the FOTG210 needs to grab, prepare and enable the clock.
-
-This is needed on for example the Cortina Gemini, where the
-platform will by default gate off the clock unless the
-peripheral (in this case the USB driver) grabs and enables
-the clock.
-
-If there is no clock available on the platform, we live
-without it. Make sure to percolate probe deferrals.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
-ChangeLog v1->v2:
-- Handle probe deferrals on the clock controller, no matter
- how unlikely they are.
-- Send the patch to get Gemini USB rolling and try to get some
- stuff upstream, this patch should be fine on its own.
----
- drivers/usb/host/fotg210-hcd.c | 33 +++++++++++++++++++++++++++++----
- drivers/usb/host/fotg210.h | 3 +++
- 2 files changed, 32 insertions(+), 4 deletions(-)
-
---- a/drivers/usb/host/fotg210-hcd.c
-+++ b/drivers/usb/host/fotg210-hcd.c
-@@ -31,6 +31,7 @@
- #include <linux/uaccess.h>
- #include <linux/platform_device.h>
- #include <linux/io.h>
-+#include <linux/clk.h>
-
- #include <asm/byteorder.h>
- #include <asm/irq.h>
-@@ -5600,7 +5601,7 @@ static int fotg210_hcd_probe(struct plat
- hcd->regs = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(hcd->regs)) {
- retval = PTR_ERR(hcd->regs);
-- goto failed;
-+ goto failed_put_hcd;
- }
-
- hcd->rsrc_start = res->start;
-@@ -5610,22 +5611,42 @@ static int fotg210_hcd_probe(struct plat
-
- fotg210->caps = hcd->regs;
-
-+ /* It's OK not to supply this clock */
-+ fotg210->pclk = clk_get(dev, "PCLK");
-+ if (!IS_ERR(fotg210->pclk)) {
-+ retval = clk_prepare_enable(fotg210->pclk);
-+ if (retval) {
-+ dev_err(dev, "failed to enable PCLK\n");
-+ goto failed_put_hcd;
-+ }
-+ } else if (PTR_ERR(fotg210->pclk) == -EPROBE_DEFER) {
-+ /*
-+ * Percolate deferrals, for anything else,
-+ * just live without the clocking.
-+ */
-+ retval = PTR_ERR(fotg210->pclk);
-+ goto failed_dis_clk;
-+ }
-+
- retval = fotg210_setup(hcd);
- if (retval)
-- goto failed;
-+ goto failed_dis_clk;
-
- fotg210_init(fotg210);
-
- retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
- if (retval) {
- dev_err(dev, "failed to add hcd with err %d\n", retval);
-- goto failed;
-+ goto failed_dis_clk;
- }
- device_wakeup_enable(hcd->self.controller);
-
- return retval;
-
--failed:
-+failed_dis_clk:
-+ if (!IS_ERR(fotg210->pclk))
-+ clk_disable_unprepare(fotg210->pclk);
-+failed_put_hcd:
- usb_put_hcd(hcd);
- fail_create_hcd:
- dev_err(dev, "init %s fail, %d\n", dev_name(dev), retval);
-@@ -5641,6 +5662,10 @@ static int fotg210_hcd_remove(struct pla
- {
- struct device *dev = &pdev->dev;
- struct usb_hcd *hcd = dev_get_drvdata(dev);
-+ struct fotg210_hcd *fotg210 = hcd_to_fotg210(hcd);
-+
-+ if (!IS_ERR(fotg210->pclk))
-+ clk_disable_unprepare(fotg210->pclk);
-
- if (!hcd)
- return 0;
---- a/drivers/usb/host/fotg210.h
-+++ b/drivers/usb/host/fotg210.h
-@@ -182,6 +182,9 @@ struct fotg210_hcd { /* one per contro
- # define COUNT(x)
- #endif
-
-+ /* silicon clock */
-+ struct clk *pclk;
-+
- /* debug files */
- struct dentry *debug_dir;
- };
+++ /dev/null
-From f9cfc45c57227448d4239e9582258587aacf34e7 Mon Sep 17 00:00:00 2001
-From: Hans Ulli Kroll <ulli.kroll@googlemail.com>
-Date: Wed, 8 Feb 2017 21:00:09 +0100
-Subject: [PATCH 14/18] usb: host: add DT bindings for faraday fotg2
-
-This adds device tree bindings for the Faraday FOTG2
-dual-mode host controller.
-
-Cc: devicetree@vger.kernel.org
-Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
-Acked-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
-ChangeLog v1->v2:
-- Changed "OTH" to "OTG"
-- Collected Rob's ACK.
-- I don't see any problem with these bindings, but IIRC Hans
- had some reservations for the OTG mode, maybe we can strip
- some properties like the mini-usb thing and use as a starter
- so we can add host mode at least?
----
- .../bindings/usb/faraday,fotg210.txt | 35 +++++++++++++++++++
- 1 file changed, 35 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/usb/faraday,fotg210.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/usb/faraday,fotg210.txt
-@@ -0,0 +1,35 @@
-+Faraday FOTG Host controller
-+
-+This OTG-capable USB host controller is found in Cortina Systems
-+Gemini and other SoC products.
-+
-+Required properties:
-+- compatible: should be one of:
-+ "faraday,fotg210"
-+ "cortina,gemini-usb", "faraday,fotg210"
-+- reg: should contain one register range i.e. start and length
-+- interrupts: description of the interrupt line
-+
-+Optional properties:
-+- clocks: should contain the IP block clock
-+- clock-names: should be "PCLK" for the IP block clock
-+
-+Required properties for "cortina,gemini-usb" compatible:
-+- syscon: a phandle to the system controller to access PHY registers
-+
-+Optional properties for "cortina,gemini-usb" compatible:
-+- cortina,gemini-mini-b: boolean property that indicates that a Mini-B
-+ OTG connector is in use
-+- wakeup-source: see power/wakeup-source.txt
-+
-+Example for Gemini:
-+
-+usb@68000000 {
-+ compatible = "cortina,gemini-usb", "faraday,fotg210";
-+ reg = <0x68000000 0x1000>;
-+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&cc 12>;
-+ clock-names = "PCLK";
-+ syscon = <&syscon>;
-+ wakeup-source;
-+};
+++ /dev/null
-From 8f45c69ba80a993a6dba2397825b27e11fa9dea7 Mon Sep 17 00:00:00 2001
-From: Hans Ulli Kroll <ulli.kroll@googlemail.com>
-Date: Thu, 9 Feb 2017 15:20:49 +0100
-Subject: [PATCH 15/18] usb: host: fotg2: add device tree probing
-
-Add device tree probing to the fotg2 driver.
-
-Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
-[Drop DMA mask coercion, drivers/of/platform.c does the job]
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/usb/host/fotg210-hcd.c | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/drivers/usb/host/fotg210-hcd.c
-+++ b/drivers/usb/host/fotg210-hcd.c
-@@ -10,6 +10,7 @@
- * Most of code borrowed from the Linux-3.7 EHCI driver
- */
- #include <linux/module.h>
-+#include <linux/of.h>
- #include <linux/device.h>
- #include <linux/dmapool.h>
- #include <linux/kernel.h>
-@@ -5676,9 +5677,18 @@ static int fotg210_hcd_remove(struct pla
- return 0;
- }
-
-+#ifdef CONFIG_OF
-+static const struct of_device_id fotg210_of_match[] = {
-+ { .compatible = "faraday,fotg210" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, fotg210_of_match);
-+#endif
-+
- static struct platform_driver fotg210_hcd_driver = {
- .driver = {
- .name = "fotg210-hcd",
-+ .of_match_table = of_match_ptr(fotg210_of_match),
- },
- .probe = fotg210_hcd_probe,
- .remove = fotg210_hcd_remove,
+++ /dev/null
-From b331ae758123ba20ba41199e007ac33fc0f242e3 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Fri, 21 Apr 2017 22:19:00 +0200
-Subject: [PATCH 16/18] usb: host: fotg2: add Gemini-specific handling
-
-The Cortina Systems Gemini has bolted on a PHY inside the
-silicon that can be handled by six bits in a MISC register in
-the system controller.
-
-If we are running on Gemini, look up a syscon regmap through
-a phandle and enable VBUS and optionally the Mini-B connector.
-
-If the device is flagged as "wakeup-source" using the standard
-DT bindings, we also enable this in the global controller for
-respective port.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/usb/host/Kconfig | 1 +
- drivers/usb/host/fotg210-hcd.c | 76 ++++++++++++++++++++++++++++++++++
- 2 files changed, 77 insertions(+)
-
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -372,6 +372,7 @@ config USB_ISP1362_HCD
- config USB_FOTG210_HCD
- tristate "FOTG210 HCD support"
- depends on USB && HAS_DMA && HAS_IOMEM
-+ select MFD_SYSCON
- ---help---
- Faraday FOTG210 is an OTG controller which can be configured as
- an USB2.0 host. It is designed to meet USB2.0 EHCI specification
---- a/drivers/usb/host/fotg210-hcd.c
-+++ b/drivers/usb/host/fotg210-hcd.c
-@@ -33,6 +33,10 @@
- #include <linux/platform_device.h>
- #include <linux/io.h>
- #include <linux/clk.h>
-+#include <linux/bitops.h>
-+/* For Cortina Gemini */
-+#include <linux/mfd/syscon.h>
-+#include <linux/regmap.h>
-
- #include <asm/byteorder.h>
- #include <asm/irq.h>
-@@ -5558,6 +5562,72 @@ static void fotg210_init(struct fotg210_
- iowrite32(value, &fotg210->regs->otgcsr);
- }
-
-+/*
-+ * Gemini-specific initialization function, only executed on the
-+ * Gemini SoC using the global misc control register.
-+ */
-+#define GEMINI_GLOBAL_MISC_CTRL 0x30
-+#define GEMINI_MISC_USB0_WAKEUP BIT(14)
-+#define GEMINI_MISC_USB1_WAKEUP BIT(15)
-+#define GEMINI_MISC_USB0_VBUS_ON BIT(22)
-+#define GEMINI_MISC_USB1_VBUS_ON BIT(23)
-+#define GEMINI_MISC_USB0_MINI_B BIT(29)
-+#define GEMINI_MISC_USB1_MINI_B BIT(30)
-+
-+static int fotg210_gemini_init(struct device *dev, struct usb_hcd *hcd)
-+{
-+ struct device_node *np = dev->of_node;
-+ struct regmap *map;
-+ bool mini_b;
-+ bool wakeup;
-+ u32 mask, val;
-+ int ret;
-+
-+ map = syscon_regmap_lookup_by_phandle(np, "syscon");
-+ if (IS_ERR(map)) {
-+ dev_err(dev, "no syscon\n");
-+ return PTR_ERR(map);
-+ }
-+ mini_b = of_property_read_bool(np, "cortina,gemini-mini-b");
-+ wakeup = of_property_read_bool(np, "wakeup-source");
-+
-+ /*
-+ * Figure out if this is USB0 or USB1 by simply checking the
-+ * physical base address.
-+ */
-+ mask = 0;
-+ if (hcd->rsrc_start == 0x69000000) {
-+ val = GEMINI_MISC_USB1_VBUS_ON;
-+ if (mini_b)
-+ val |= GEMINI_MISC_USB1_MINI_B;
-+ else
-+ mask |= GEMINI_MISC_USB1_MINI_B;
-+ if (wakeup)
-+ val |= GEMINI_MISC_USB1_WAKEUP;
-+ else
-+ mask |= GEMINI_MISC_USB1_WAKEUP;
-+ } else {
-+ val = GEMINI_MISC_USB0_VBUS_ON;
-+ if (mini_b)
-+ val |= GEMINI_MISC_USB0_MINI_B;
-+ else
-+ mask |= GEMINI_MISC_USB0_MINI_B;
-+ if (wakeup)
-+ val |= GEMINI_MISC_USB0_WAKEUP;
-+ else
-+ mask |= GEMINI_MISC_USB0_WAKEUP;
-+ }
-+
-+ ret = regmap_update_bits(map, GEMINI_GLOBAL_MISC_CTRL, mask, val);
-+ if (ret) {
-+ dev_err(dev, "failed to initialize Gemini PHY\n");
-+ return ret;
-+ }
-+
-+ dev_info(dev, "initialized Gemini PHY\n");
-+ return 0;
-+}
-+
- /**
- * fotg210_hcd_probe - initialize faraday FOTG210 HCDs
- *
-@@ -5635,6 +5705,12 @@ static int fotg210_hcd_probe(struct plat
-
- fotg210_init(fotg210);
-
-+ if (of_device_is_compatible(dev->of_node, "cortina,gemini-usb")) {
-+ retval = fotg210_gemini_init(dev, hcd);
-+ if (retval)
-+ goto failed_dis_clk;
-+ }
-+
- retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
- if (retval) {
- dev_err(dev, "failed to add hcd with err %d\n", retval);
+++ /dev/null
-From 1ff9a279dbeb0034929042faef186ce934474c2b Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Fri, 21 Apr 2017 20:50:22 +0200
-Subject: [PATCH 18/18] ARM: dts: Add the FOTG210 USB host to Gemini boards
-
-This adds the FOTG210 USB host controller to the Gemini
-device trees. In the main SoC DTSI it is flagged as disabled
-and then it is selectively enabled on the devices that utilize
-it.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
-ChangeLog v1->v2:
-- Rebased to kernel v4.19-rc1
-- Drop pinctrl-0 handle from the second USB port
-- Add comment on how to deal with the USB pin control
----
- arch/arm/boot/dts/gemini-dlink-dir-685.dts | 8 ++++++
- arch/arm/boot/dts/gemini-nas4220b.dts | 8 ++++++
- arch/arm/boot/dts/gemini-rut1xx.dts | 20 ++++++++++++++
- arch/arm/boot/dts/gemini-sl93512r.dts | 8 ++++++
- arch/arm/boot/dts/gemini-sq201.dts | 8 ++++++
- arch/arm/boot/dts/gemini-wbd111.dts | 8 ++++++
- arch/arm/boot/dts/gemini-wbd222.dts | 8 ++++++
- arch/arm/boot/dts/gemini.dtsi | 32 ++++++++++++++++++++++
- 8 files changed, 100 insertions(+)
-
---- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-@@ -452,5 +452,13 @@
- };
- };
- };
-+
-+ usb@68000000 {
-+ status = "okay";
-+ };
-+
-+ usb@69000000 {
-+ status = "okay";
-+ };
- };
- };
---- a/arch/arm/boot/dts/gemini-nas4220b.dts
-+++ b/arch/arm/boot/dts/gemini-nas4220b.dts
-@@ -204,5 +204,13 @@
- ata@63400000 {
- status = "okay";
- };
-+
-+ usb@68000000 {
-+ status = "okay";
-+ };
-+
-+ usb@69000000 {
-+ status = "okay";
-+ };
- };
- };
---- a/arch/arm/boot/dts/gemini-rut1xx.dts
-+++ b/arch/arm/boot/dts/gemini-rut1xx.dts
-@@ -124,5 +124,25 @@
- /* Not used in this platform */
- };
- };
-+
-+ ethernet@60000000 {
-+ status = "okay";
-+
-+ ethernet-port@0 {
-+ phy-mode = "rgmii";
-+ phy-handle = <&phy0>;
-+ };
-+ ethernet-port@1 {
-+ /* Not used in this platform */
-+ };
-+ };
-+
-+ usb@68000000 {
-+ status = "okay";
-+ };
-+
-+ usb@69000000 {
-+ status = "okay";
-+ };
- };
- };
---- a/arch/arm/boot/dts/gemini-sl93512r.dts
-+++ b/arch/arm/boot/dts/gemini-sl93512r.dts
-@@ -324,5 +324,13 @@
- ata@63400000 {
- status = "okay";
- };
-+
-+ usb@68000000 {
-+ status = "okay";
-+ };
-+
-+ usb@69000000 {
-+ status = "okay";
-+ };
- };
- };
---- a/arch/arm/boot/dts/gemini-sq201.dts
-+++ b/arch/arm/boot/dts/gemini-sq201.dts
-@@ -292,5 +292,13 @@
- ata@63000000 {
- status = "okay";
- };
-+
-+ usb@68000000 {
-+ status = "okay";
-+ };
-+
-+ usb@69000000 {
-+ status = "okay";
-+ };
- };
- };
---- a/arch/arm/boot/dts/gemini-wbd111.dts
-+++ b/arch/arm/boot/dts/gemini-wbd111.dts
-@@ -171,5 +171,13 @@
- /* Not used in this platform */
- };
- };
-+
-+ usb@68000000 {
-+ status = "okay";
-+ };
-+
-+ usb@69000000 {
-+ status = "okay";
-+ };
- };
- };
---- a/arch/arm/boot/dts/gemini-wbd222.dts
-+++ b/arch/arm/boot/dts/gemini-wbd222.dts
-@@ -183,5 +183,13 @@
- phy-handle = <&phy1>;
- };
- };
-+
-+ usb@68000000 {
-+ status = "okay";
-+ };
-+
-+ usb@69000000 {
-+ status = "okay";
-+ };
- };
- };
---- a/arch/arm/boot/dts/gemini.dtsi
-+++ b/arch/arm/boot/dts/gemini.dtsi
-@@ -409,5 +409,37 @@
- #size-cells = <0>;
- status = "disabled";
- };
-+
-+ usb@68000000 {
-+ compatible = "cortina,gemini-usb", "faraday,fotg210";
-+ reg = <0x68000000 0x1000>;
-+ interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
-+ resets = <&syscon GEMINI_RESET_USB0>;
-+ clocks = <&syscon GEMINI_CLK_GATE_USB0>;
-+ clock-names = "PCLK";
-+ /*
-+ * This will claim pins for USB0 and USB1 at the same
-+ * time as they are using some common pins. If you for
-+ * some reason have a system using USB1 at 96000000 but
-+ * NOT using USB0 at 68000000 you wll have to add the
-+ * usb_default_pins to the USB controller at 96000000
-+ * in your .dts for the board.
-+ */
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&usb_default_pins>;
-+ syscon = <&syscon>;
-+ status = "disabled";
-+ };
-+
-+ usb@69000000 {
-+ compatible = "cortina,gemini-usb", "faraday,fotg210";
-+ reg = <0x69000000 0x1000>;
-+ interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
-+ resets = <&syscon GEMINI_RESET_USB1>;
-+ clocks = <&syscon GEMINI_CLK_GATE_USB1>;
-+ clock-names = "PCLK";
-+ syscon = <&syscon>;
-+ status = "disabled";
-+ };
- };
- };
+++ /dev/null
-From 4a228ecf553e879bae384e634bb6413438e81a0e Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Mon, 11 Mar 2019 15:43:05 +0100
-Subject: [PATCH 1/2] ARM: dts: gemini: Indent DIR-685 partition table
-
-It is discouraged to have OF partitions as subnodes directly
-under the device, create a "partitions" subnode and put the
-partitions inside it.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- arch/arm/boot/dts/gemini-dlink-dir-685.dts | 82 ++++++++++++----------
- 1 file changed, 44 insertions(+), 38 deletions(-)
-
---- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-@@ -267,44 +267,50 @@
- /* 32MB of flash */
- reg = <0x30000000 0x02000000>;
-
-- /*
-- * This "RedBoot" is the Storlink derivative.
-- */
-- partition@0 {
-- label = "RedBoot";
-- reg = <0x00000000 0x00040000>;
-- read-only;
-- };
-- /*
-- * This firmware image contains the kernel catenated
-- * with the squashfs root filesystem. For some reason
-- * this is called "upgrade" on the vendor system.
-- */
-- partition@40000 {
-- label = "upgrade";
-- reg = <0x00040000 0x01f40000>;
-- read-only;
-- };
-- /* RGDB, Residental Gateway Database? */
-- partition@1f80000 {
-- label = "rgdb";
-- reg = <0x01f80000 0x00040000>;
-- read-only;
-- };
-- /*
-- * This partition contains MAC addresses for WAN,
-- * WLAN and LAN, and the country code (for wireless
-- * I guess).
-- */
-- partition@1fc0000 {
-- label = "nvram";
-- reg = <0x01fc0000 0x00020000>;
-- read-only;
-- };
-- partition@1fe0000 {
-- label = "LangPack";
-- reg = <0x01fe0000 0x00020000>;
-- read-only;
-+ partitions {
-+ compatible = "fixed-partitions";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ /*
-+ * This "RedBoot" is the Storlink derivative.
-+ */
-+ partition@0 {
-+ label = "RedBoot";
-+ reg = <0x00000000 0x00040000>;
-+ read-only;
-+ };
-+ /*
-+ * This firmware image contains the kernel catenated
-+ * with the squashfs root filesystem. For some reason
-+ * this is called "upgrade" on the vendor system.
-+ */
-+ partition@40000 {
-+ label = "upgrade";
-+ reg = <0x00040000 0x01f40000>;
-+ read-only;
-+ };
-+ /* RGDB, Residental Gateway Database? */
-+ partition@1f80000 {
-+ label = "rgdb";
-+ reg = <0x01f80000 0x00040000>;
-+ read-only;
-+ };
-+ /*
-+ * This partition contains MAC addresses for WAN,
-+ * WLAN and LAN, and the country code (for wireless
-+ * I guess).
-+ */
-+ partition@1fc0000 {
-+ label = "nvram";
-+ reg = <0x01fc0000 0x00020000>;
-+ read-only;
-+ };
-+ partition@1fe0000 {
-+ label = "LangPack";
-+ reg = <0x01fe0000 0x00020000>;
-+ read-only;
-+ };
- };
- };
-
+++ /dev/null
-From ea99e7570882df53478f9b5fa5886a6e92fc2c7f Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Mon, 11 Mar 2019 15:44:29 +0100
-Subject: [PATCH] ARM: dts: Augment DIR-685 partition table for OpenWrt
-
-Rename the firmware partition so that the firmware MTD
-splitter will do its job, drop the rootfs arguments as
-the MTD splitter will set this up automatically.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- arch/arm/boot/dts/gemini-dlink-dir-685.dts | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
-@@ -20,7 +20,7 @@
- };
-
- chosen {
-- bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait consoleblank=300";
-+ bootargs = "console=ttyS0,19200n8 consoleblank=300";
- stdout-path = "uart0:19200n8";
- };
-
-@@ -286,9 +286,9 @@
- * this is called "upgrade" on the vendor system.
- */
- partition@40000 {
-- label = "upgrade";
-+ compatible = "wrg";
-+ label = "firmware";
- reg = <0x00040000 0x01f40000>;
-- read-only;
- };
- /* RGDB, Residental Gateway Database? */
- partition@1f80000 {
+++ /dev/null
-From cad2161e64aca9e1c94fd11b0d0f7b53c9e80de0 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Fri, 12 Jul 2019 22:57:11 +0200
-Subject: [PATCH 1/2] ARM: dts: gemini: Switch to redboot partition parsing
-
-This switches the kernel to parse the Redboot partitions
-in the SL93512r and the NAS4220B properly using the
-right compatible string instead of using hard-coded
-partitions.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- arch/arm/boot/dts/gemini-nas4220b.dts | 35 +++------------------------
- arch/arm/boot/dts/gemini-sl93512r.dts | 35 +++------------------------
- 2 files changed, 8 insertions(+), 62 deletions(-)
-
---- a/arch/arm/boot/dts/gemini-nas4220b.dts
-+++ b/arch/arm/boot/dts/gemini-nas4220b.dts
-@@ -81,37 +81,10 @@
- /* 16MB of flash */
- reg = <0x30000000 0x01000000>;
-
-- partition@0 {
-- label = "RedBoot";
-- reg = <0x00000000 0x00020000>;
-- read-only;
-- };
-- partition@20000 {
-- label = "Kernel";
-- reg = <0x00020000 0x00300000>;
-- };
-- partition@320000 {
-- label = "Ramdisk";
-- reg = <0x00320000 0x00600000>;
-- };
-- partition@920000 {
-- label = "Application";
-- reg = <0x00920000 0x00600000>;
-- };
-- partition@f20000 {
-- label = "VCTL";
-- reg = <0x00f20000 0x00020000>;
-- read-only;
-- };
-- partition@f40000 {
-- label = "CurConf";
-- reg = <0x00f40000 0x000a0000>;
-- read-only;
-- };
-- partition@fe0000 {
-- label = "FIS directory";
-- reg = <0x00fe0000 0x00020000>;
-- read-only;
-+ partitions {
-+ compatible = "redboot-fis";
-+ /* Eraseblock at 0xfe0000 */
-+ fis-index-block = <0x1fc>;
- };
- };
-
---- a/arch/arm/boot/dts/gemini-sl93512r.dts
-+++ b/arch/arm/boot/dts/gemini-sl93512r.dts
-@@ -143,37 +143,10 @@
- /* 16MB of flash */
- reg = <0x30000000 0x01000000>;
-
-- partition@0 {
-- label = "BOOT";
-- reg = <0x00000000 0x00020000>;
-- read-only;
-- };
-- partition@120000 {
-- label = "Kern";
-- reg = <0x00020000 0x00300000>;
-- };
-- partition@320000 {
-- label = "Ramdisk";
-- reg = <0x00320000 0x00600000>;
-- };
-- partition@920000 {
-- label = "Application";
-- reg = <0x00920000 0x00600000>;
-- };
-- partition@f20000 {
-- label = "VCTL";
-- reg = <0x00f20000 0x00020000>;
-- read-only;
-- };
-- partition@f40000 {
-- label = "CurConf";
-- reg = <0x00f40000 0x000a0000>;
-- read-only;
-- };
-- partition@fe0000 {
-- label = "FIS directory";
-- reg = <0x00fe0000 0x00020000>;
-- read-only;
-+ partitions {
-+ compatible = "redboot-fis";
-+ /* Eraseblock at 0xfe0000 */
-+ fis-index-block = <0x1fc>;
- };
- };
-
+++ /dev/null
-From b40cd2116ea0ba3584db12ab9dab7e02dd1e3333 Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Fri, 12 Jul 2019 22:59:39 +0200
-Subject: [PATCH 2/2] ARM: dts: gemini: Mount root from mtdblock3
-
-The third mtdblock device named "Application" is where we
-want to mount our root filesystem.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- arch/arm/boot/dts/gemini-nas4220b.dts | 2 +-
- arch/arm/boot/dts/gemini-sl93512r.dts | 2 +-
- 2 files changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/arm/boot/dts/gemini-nas4220b.dts
-+++ b/arch/arm/boot/dts/gemini-nas4220b.dts
-@@ -20,7 +20,7 @@
- };
-
- chosen {
-- bootargs = "console=ttyS0,19200n8";
-+ bootargs = "console=ttyS0,19200n8 root=/dev/mtdblock3 rw rootfstype=squashfs,jffs2 rootwait";
- stdout-path = &uart0;
- };
-
---- a/arch/arm/boot/dts/gemini-sl93512r.dts
-+++ b/arch/arm/boot/dts/gemini-sl93512r.dts
-@@ -24,7 +24,7 @@
- };
-
- chosen {
-- bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait";
-+ bootargs = "console=ttyS0,19200n8 root=/dev/mtdblock3 rw rootfstype=squashfs,jffs2 rootwait";
- stdout-path = &uart0;
- };
-
+++ /dev/null
-From 384ec5ed82845c2c81968743dde4a758f572c11b Mon Sep 17 00:00:00 2001
-From: Linus Walleij <linus.walleij@linaro.org>
-Date: Sat, 13 Jul 2019 11:52:29 +0200
-Subject: [PATCH] ARM: dts: gemini: Fix up confused pin settings
-
-The SL93512r board has its pin muxing set up for the wrong
-ASIC: SL3516 instead of SL3512 that it is using. Fix it
-up and reference the right GPIO for the WPS button.
-
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- arch/arm/boot/dts/gemini-sl93512r.dts | 19 +++++++++++--------
- 1 file changed, 11 insertions(+), 8 deletions(-)
-
---- a/arch/arm/boot/dts/gemini-sl93512r.dts
-+++ b/arch/arm/boot/dts/gemini-sl93512r.dts
-@@ -36,8 +36,8 @@
- wakeup-source;
- linux,code = <KEY_WPS_BUTTON>;
- label = "WPS";
-- /* Conflict with NAND flash */
-- gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
-+ /* Conflicts with TVC and extended flash */
-+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
- };
-
- button-setup {
-@@ -153,17 +153,20 @@
- syscon: syscon@40000000 {
- pinctrl {
- /*
-- * gpio0egrp cover line 16 used by HD LED
-- * gpio0fgrp cover line 17, 18 used by wireless LED and reset button
-- * gpio0hgrp cover line 21, 22 used by MDIO for Marvell PHY
-- * gpio0kgrp cover line 31 used by USB LED
-+ * gpio0agrp cover line 0, used by WPS button
-+ * gpio0fgrp cover line 16 used by HD LED
-+ * gpio0ggrp cover line 17, 18 used by wireless LAN LED and
-+ * reset button OR USB ID select on 17 and USB VBUS select
-+ * on 18. (Confusing.)
-+ * gpio0igrp cover line 21, 22 used by MDIO for Marvell PHY
- */
- gpio0_default_pins: pinctrl-gpio0 {
- mux {
- function = "gpio0";
-- groups = "gpio0egrp",
-+ groups = "gpio0agrp",
- "gpio0fgrp",
-- "gpio0hgrp";
-+ "gpio0ggrp",
-+ "gpio0igrp";
- };
- };
- /*
+++ /dev/null
-From 13b1ecc3401653a355798eb1dee10cc1608202f4 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Mon, 18 Jan 2016 12:27:49 +0100
-Subject: [PATCH 33/34] Kbuild: don't hardcode path to awk in
- scripts/ld-version.sh
-
-On some systems /usr/bin/awk does not exist, or is broken. Find it via
-$PATH instead.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- scripts/ld-version.sh | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
---- a/scripts/ld-version.sh
-+++ b/scripts/ld-version.sh
-@@ -1,6 +1,7 @@
--#!/usr/bin/awk -f
-+#!/bin/sh
- # SPDX-License-Identifier: GPL-2.0
- # extract linker version number from stdin and turn into single number
-+exec awk '
- {
- gsub(".*\\)", "");
- gsub(".*version ", "");
-@@ -9,3 +10,4 @@
- print a[1]*100000000 + a[2]*1000000 + a[3]*10000;
- exit
- }
-+'
+++ /dev/null
-From 173019b66dcc9d68ad9333aa744dad1e369b5aa8 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sun, 9 Jul 2017 00:26:53 +0200
-Subject: [PATCH 34/34] kernel: add compile fix for linux 4.9 on x86
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- Makefile | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/Makefile
-+++ b/Makefile
-@@ -432,8 +432,8 @@ KBUILD_LDFLAGS :=
- GCC_PLUGINS_CFLAGS :=
- CLANG_FLAGS :=
-
--export ARCH SRCARCH CONFIG_SHELL HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE AS LD CC
--export CPP AR NM STRIP OBJCOPY OBJDUMP KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS
-+export ARCH SRCARCH SUBARCH CONFIG_SHELL HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE AS LD
-+export CC CPP AR NM STRIP OBJCOPY OBJDUMP KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS
- export MAKE LEX YACC AWK GENKSYMS INSTALLKERNEL PERL PYTHON PYTHON2 PYTHON3 UTS_MACHINE
- export HOSTCXX KBUILD_HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
-
+++ /dev/null
-From 1bb0c3ec899827cfa4668bb63a08713a40744d21 Mon Sep 17 00:00:00 2001
-From: Florian Westphal <fw@strlen.de>
-Date: Sun, 9 Jul 2017 08:58:30 +0200
-Subject: [PATCH] netfilter: conntrack: cache route for forwarded connections
-
-... to avoid per-packet FIB lookup if possible.
-
-The cached dst is re-used provided the input interface
-is the same as that of the previous packet in the same direction.
-
-If not, the cached dst is invalidated.
-
-For ipv6 we also need to store sernum, else dst_check doesn't work,
-pointed out by Eric Dumazet.
-
-This should speed up forwarding when conntrack is already in use
-anyway, especially when using reverse path filtering -- active RPF
-enforces two FIB lookups for each packet.
-
-Before the routing cache removal this didn't matter since RPF was performed
-only when route cache didn't yield a result; but without route cache it
-comes at higher price.
-
-Julian Anastasov suggested to add NETDEV_UNREGISTER handler to
-avoid holding on to dsts of 'frozen' conntracks.
-
-Signed-off-by: Florian Westphal <fw@strlen.de>
----
- include/net/netfilter/nf_conntrack_extend.h | 4 +
- include/net/netfilter/nf_conntrack_rtcache.h | 34 +++
- net/netfilter/Kconfig | 12 +
- net/netfilter/Makefile | 3 +
- net/netfilter/nf_conntrack_rtcache.c | 428 +++++++++++++++++++++++++++
- 5 files changed, 481 insertions(+)
- create mode 100644 include/net/netfilter/nf_conntrack_rtcache.h
- create mode 100644 net/netfilter/nf_conntrack_rtcache.c
-
---- a/include/net/netfilter/nf_conntrack_extend.h
-+++ b/include/net/netfilter/nf_conntrack_extend.h
-@@ -28,6 +28,9 @@ enum nf_ct_ext_id {
- #if IS_ENABLED(CONFIG_NETFILTER_SYNPROXY)
- NF_CT_EXT_SYNPROXY,
- #endif
-+#if IS_ENABLED(CONFIG_NF_CONNTRACK_RTCACHE)
-+ NF_CT_EXT_RTCACHE,
-+#endif
- NF_CT_EXT_NUM,
- };
-
-@@ -40,6 +43,7 @@ enum nf_ct_ext_id {
- #define NF_CT_EXT_TIMEOUT_TYPE struct nf_conn_timeout
- #define NF_CT_EXT_LABELS_TYPE struct nf_conn_labels
- #define NF_CT_EXT_SYNPROXY_TYPE struct nf_conn_synproxy
-+#define NF_CT_EXT_RTCACHE_TYPE struct nf_conn_rtcache
-
- /* Extensions: optional stuff which isn't permanently in struct. */
- struct nf_ct_ext {
---- /dev/null
-+++ b/include/net/netfilter/nf_conntrack_rtcache.h
-@@ -0,0 +1,34 @@
-+#include <linux/gfp.h>
-+#include <net/netfilter/nf_conntrack.h>
-+#include <net/netfilter/nf_conntrack_extend.h>
-+
-+struct dst_entry;
-+
-+struct nf_conn_dst_cache {
-+ struct dst_entry *dst;
-+ int iif;
-+#if IS_ENABLED(CONFIG_NF_CONNTRACK_IPV6)
-+ u32 cookie;
-+#endif
-+
-+};
-+
-+struct nf_conn_rtcache {
-+ struct nf_conn_dst_cache cached_dst[IP_CT_DIR_MAX];
-+};
-+
-+static inline
-+struct nf_conn_rtcache *nf_ct_rtcache_find(const struct nf_conn *ct)
-+{
-+#if IS_ENABLED(CONFIG_NF_CONNTRACK_RTCACHE)
-+ return nf_ct_ext_find(ct, NF_CT_EXT_RTCACHE);
-+#else
-+ return NULL;
-+#endif
-+}
-+
-+static inline int nf_conn_rtcache_iif_get(const struct nf_conn_rtcache *rtc,
-+ enum ip_conntrack_dir dir)
-+{
-+ return rtc->cached_dst[dir].iif;
-+}
---- a/net/netfilter/Kconfig
-+++ b/net/netfilter/Kconfig
-@@ -135,6 +135,18 @@ config NF_CONNTRACK_EVENTS
-
- If unsure, say `N'.
-
-+config NF_CONNTRACK_RTCACHE
-+ tristate "Cache route entries in conntrack objects"
-+ depends on NETFILTER_ADVANCED
-+ depends on NF_CONNTRACK
-+ help
-+ If this option is enabled, the connection tracking code will
-+ cache routing information for each connection that is being
-+ forwarded, at a cost of 32 bytes per conntrack object.
-+
-+ To compile it as a module, choose M here. If unsure, say N.
-+ The module will be called nf_conntrack_rtcache.
-+
- config NF_CONNTRACK_TIMEOUT
- bool 'Connection tracking timeout'
- depends on NETFILTER_ADVANCED
---- a/net/netfilter/Makefile
-+++ b/net/netfilter/Makefile
-@@ -25,6 +25,9 @@ obj-$(CONFIG_NETFILTER_NETLINK_OSF) += n
- # connection tracking
- obj-$(CONFIG_NF_CONNTRACK) += nf_conntrack.o
-
-+# optional conntrack route cache extension
-+obj-$(CONFIG_NF_CONNTRACK_RTCACHE) += nf_conntrack_rtcache.o
-+
- obj-$(CONFIG_NF_CT_PROTO_GRE) += nf_conntrack_proto_gre.o
-
- # netlink interface for nf_conntrack
---- /dev/null
-+++ b/net/netfilter/nf_conntrack_rtcache.c
-@@ -0,0 +1,428 @@
-+/* route cache for netfilter.
-+ *
-+ * (C) 2014 Red Hat GmbH
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-+
-+#include <linux/types.h>
-+#include <linux/netfilter.h>
-+#include <linux/skbuff.h>
-+#include <linux/stddef.h>
-+#include <linux/kernel.h>
-+#include <linux/netdevice.h>
-+#include <linux/export.h>
-+#include <linux/module.h>
-+
-+#include <net/dst.h>
-+
-+#include <net/netfilter/nf_conntrack.h>
-+#include <net/netfilter/nf_conntrack_core.h>
-+#include <net/netfilter/nf_conntrack_extend.h>
-+#include <net/netfilter/nf_conntrack_rtcache.h>
-+
-+#if IS_ENABLED(CONFIG_NF_CONNTRACK_IPV6)
-+#include <net/ip6_fib.h>
-+#endif
-+
-+static void __nf_conn_rtcache_destroy(struct nf_conn_rtcache *rtc,
-+ enum ip_conntrack_dir dir)
-+{
-+ struct dst_entry *dst = rtc->cached_dst[dir].dst;
-+
-+ dst_release(dst);
-+}
-+
-+static void nf_conn_rtcache_destroy(struct nf_conn *ct)
-+{
-+ struct nf_conn_rtcache *rtc = nf_ct_rtcache_find(ct);
-+
-+ if (!rtc)
-+ return;
-+
-+ __nf_conn_rtcache_destroy(rtc, IP_CT_DIR_ORIGINAL);
-+ __nf_conn_rtcache_destroy(rtc, IP_CT_DIR_REPLY);
-+}
-+
-+static void nf_ct_rtcache_ext_add(struct nf_conn *ct)
-+{
-+ struct nf_conn_rtcache *rtc;
-+
-+ rtc = nf_ct_ext_add(ct, NF_CT_EXT_RTCACHE, GFP_ATOMIC);
-+ if (rtc) {
-+ rtc->cached_dst[IP_CT_DIR_ORIGINAL].iif = -1;
-+ rtc->cached_dst[IP_CT_DIR_ORIGINAL].dst = NULL;
-+ rtc->cached_dst[IP_CT_DIR_REPLY].iif = -1;
-+ rtc->cached_dst[IP_CT_DIR_REPLY].dst = NULL;
-+ }
-+}
-+
-+static struct nf_conn_rtcache *nf_ct_rtcache_find_usable(struct nf_conn *ct)
-+{
-+ return nf_ct_rtcache_find(ct);
-+}
-+
-+static struct dst_entry *
-+nf_conn_rtcache_dst_get(const struct nf_conn_rtcache *rtc,
-+ enum ip_conntrack_dir dir)
-+{
-+ return rtc->cached_dst[dir].dst;
-+}
-+
-+static u32 nf_rtcache_get_cookie(int pf, const struct dst_entry *dst)
-+{
-+#if IS_ENABLED(CONFIG_NF_CONNTRACK_IPV6)
-+ if (pf == NFPROTO_IPV6) {
-+ const struct rt6_info *rt = (const struct rt6_info *)dst;
-+
-+ if (rt->from && rt->from->fib6_node)
-+ return (u32)rt->from->fib6_node->fn_sernum;
-+ }
-+#endif
-+ return 0;
-+}
-+
-+static void nf_conn_rtcache_dst_set(int pf,
-+ struct nf_conn_rtcache *rtc,
-+ struct dst_entry *dst,
-+ enum ip_conntrack_dir dir, int iif)
-+{
-+ if (rtc->cached_dst[dir].iif != iif)
-+ rtc->cached_dst[dir].iif = iif;
-+
-+ if (rtc->cached_dst[dir].dst != dst) {
-+ struct dst_entry *old;
-+
-+ dst_hold(dst);
-+
-+ old = xchg(&rtc->cached_dst[dir].dst, dst);
-+ dst_release(old);
-+
-+#if IS_ENABLED(CONFIG_NF_CONNTRACK_IPV6)
-+ if (pf == NFPROTO_IPV6)
-+ rtc->cached_dst[dir].cookie =
-+ nf_rtcache_get_cookie(pf, dst);
-+#endif
-+ }
-+}
-+
-+static void nf_conn_rtcache_dst_obsolete(struct nf_conn_rtcache *rtc,
-+ enum ip_conntrack_dir dir)
-+{
-+ struct dst_entry *old;
-+
-+ pr_debug("Invalidate iif %d for dir %d on cache %p\n",
-+ rtc->cached_dst[dir].iif, dir, rtc);
-+
-+ old = xchg(&rtc->cached_dst[dir].dst, NULL);
-+ dst_release(old);
-+ rtc->cached_dst[dir].iif = -1;
-+}
-+
-+static unsigned int nf_rtcache_in(u_int8_t pf,
-+ struct sk_buff *skb,
-+ const struct nf_hook_state *state)
-+{
-+ struct nf_conn_rtcache *rtc;
-+ enum ip_conntrack_info ctinfo;
-+ enum ip_conntrack_dir dir;
-+ struct dst_entry *dst;
-+ struct nf_conn *ct;
-+ int iif;
-+ u32 cookie;
-+
-+ if (skb_dst(skb) || skb->sk)
-+ return NF_ACCEPT;
-+
-+ ct = nf_ct_get(skb, &ctinfo);
-+ if (!ct)
-+ return NF_ACCEPT;
-+
-+ rtc = nf_ct_rtcache_find_usable(ct);
-+ if (!rtc)
-+ return NF_ACCEPT;
-+
-+ /* if iif changes, don't use cache and let ip stack
-+ * do route lookup.
-+ *
-+ * If rp_filter is enabled it might toss skb, so
-+ * we don't want to avoid these checks.
-+ */
-+ dir = CTINFO2DIR(ctinfo);
-+ iif = nf_conn_rtcache_iif_get(rtc, dir);
-+ if (state->in->ifindex != iif) {
-+ pr_debug("ct %p, iif %d, cached iif %d, skip cached entry\n",
-+ ct, iif, state->in->ifindex);
-+ return NF_ACCEPT;
-+ }
-+ dst = nf_conn_rtcache_dst_get(rtc, dir);
-+ if (dst == NULL)
-+ return NF_ACCEPT;
-+
-+ cookie = nf_rtcache_get_cookie(pf, dst);
-+
-+ dst = dst_check(dst, cookie);
-+ pr_debug("obtained dst %p for skb %p, cookie %d\n", dst, skb, cookie);
-+ if (likely(dst))
-+ skb_dst_set_noref(skb, dst);
-+ else
-+ nf_conn_rtcache_dst_obsolete(rtc, dir);
-+
-+ return NF_ACCEPT;
-+}
-+
-+static unsigned int nf_rtcache_forward(u_int8_t pf,
-+ struct sk_buff *skb,
-+ const struct nf_hook_state *state)
-+{
-+ struct nf_conn_rtcache *rtc;
-+ enum ip_conntrack_info ctinfo;
-+ enum ip_conntrack_dir dir;
-+ struct nf_conn *ct;
-+ struct dst_entry *dst = skb_dst(skb);
-+ int iif;
-+
-+ ct = nf_ct_get(skb, &ctinfo);
-+ if (!ct)
-+ return NF_ACCEPT;
-+
-+ if (dst && dst_xfrm(dst))
-+ return NF_ACCEPT;
-+
-+ if (!nf_ct_is_confirmed(ct)) {
-+ if (WARN_ON(nf_ct_rtcache_find(ct)))
-+ return NF_ACCEPT;
-+ nf_ct_rtcache_ext_add(ct);
-+ return NF_ACCEPT;
-+ }
-+
-+ rtc = nf_ct_rtcache_find_usable(ct);
-+ if (!rtc)
-+ return NF_ACCEPT;
-+
-+ dir = CTINFO2DIR(ctinfo);
-+ iif = nf_conn_rtcache_iif_get(rtc, dir);
-+ pr_debug("ct %p, skb %p, dir %d, iif %d, cached iif %d\n",
-+ ct, skb, dir, iif, state->in->ifindex);
-+ if (likely(state->in->ifindex == iif))
-+ return NF_ACCEPT;
-+
-+ nf_conn_rtcache_dst_set(pf, rtc, skb_dst(skb), dir, state->in->ifindex);
-+ return NF_ACCEPT;
-+}
-+
-+static unsigned int nf_rtcache_in4(void *priv,
-+ struct sk_buff *skb,
-+ const struct nf_hook_state *state)
-+{
-+ return nf_rtcache_in(NFPROTO_IPV4, skb, state);
-+}
-+
-+static unsigned int nf_rtcache_forward4(void *priv,
-+ struct sk_buff *skb,
-+ const struct nf_hook_state *state)
-+{
-+ return nf_rtcache_forward(NFPROTO_IPV4, skb, state);
-+}
-+
-+#if IS_ENABLED(CONFIG_NF_CONNTRACK_IPV6)
-+static unsigned int nf_rtcache_in6(void *priv,
-+ struct sk_buff *skb,
-+ const struct nf_hook_state *state)
-+{
-+ return nf_rtcache_in(NFPROTO_IPV6, skb, state);
-+}
-+
-+static unsigned int nf_rtcache_forward6(void *priv,
-+ struct sk_buff *skb,
-+ const struct nf_hook_state *state)
-+{
-+ return nf_rtcache_forward(NFPROTO_IPV6, skb, state);
-+}
-+#endif
-+
-+static int nf_rtcache_dst_remove(struct nf_conn *ct, void *data)
-+{
-+ struct nf_conn_rtcache *rtc = nf_ct_rtcache_find(ct);
-+ struct net_device *dev = data;
-+
-+ if (!rtc)
-+ return 0;
-+
-+ if (dev->ifindex == rtc->cached_dst[IP_CT_DIR_ORIGINAL].iif ||
-+ dev->ifindex == rtc->cached_dst[IP_CT_DIR_REPLY].iif) {
-+ nf_conn_rtcache_dst_obsolete(rtc, IP_CT_DIR_ORIGINAL);
-+ nf_conn_rtcache_dst_obsolete(rtc, IP_CT_DIR_REPLY);
-+ }
-+
-+ return 0;
-+}
-+
-+static int nf_rtcache_netdev_event(struct notifier_block *this,
-+ unsigned long event, void *ptr)
-+{
-+ struct net_device *dev = netdev_notifier_info_to_dev(ptr);
-+ struct net *net = dev_net(dev);
-+
-+ if (event == NETDEV_DOWN)
-+ nf_ct_iterate_cleanup_net(net, nf_rtcache_dst_remove, dev, 0, 0);
-+
-+ return NOTIFY_DONE;
-+}
-+
-+static struct notifier_block nf_rtcache_notifier = {
-+ .notifier_call = nf_rtcache_netdev_event,
-+};
-+
-+static struct nf_hook_ops rtcache_ops[] = {
-+ {
-+ .hook = nf_rtcache_in4,
-+ .pf = NFPROTO_IPV4,
-+ .hooknum = NF_INET_PRE_ROUTING,
-+ .priority = NF_IP_PRI_LAST,
-+ },
-+ {
-+ .hook = nf_rtcache_forward4,
-+ .pf = NFPROTO_IPV4,
-+ .hooknum = NF_INET_FORWARD,
-+ .priority = NF_IP_PRI_LAST,
-+ },
-+#if IS_ENABLED(CONFIG_NF_CONNTRACK_IPV6)
-+ {
-+ .hook = nf_rtcache_in6,
-+ .pf = NFPROTO_IPV6,
-+ .hooknum = NF_INET_PRE_ROUTING,
-+ .priority = NF_IP_PRI_LAST,
-+ },
-+ {
-+ .hook = nf_rtcache_forward6,
-+ .pf = NFPROTO_IPV6,
-+ .hooknum = NF_INET_FORWARD,
-+ .priority = NF_IP_PRI_LAST,
-+ },
-+#endif
-+};
-+
-+static struct nf_ct_ext_type rtcache_extend __read_mostly = {
-+ .len = sizeof(struct nf_conn_rtcache),
-+ .align = __alignof__(struct nf_conn_rtcache),
-+ .id = NF_CT_EXT_RTCACHE,
-+ .destroy = nf_conn_rtcache_destroy,
-+};
-+
-+static int __net_init rtcache_net_init(struct net *net)
-+{
-+ return nf_register_net_hooks(net, rtcache_ops, ARRAY_SIZE(rtcache_ops));
-+}
-+
-+static void __net_exit rtcache_net_exit(struct net *net)
-+{
-+ /* remove hooks so no new connections get rtcache extension */
-+ nf_unregister_net_hooks(net, rtcache_ops, ARRAY_SIZE(rtcache_ops));
-+}
-+
-+static struct pernet_operations rtcache_ops_net_ops = {
-+ .init = rtcache_net_init,
-+ .exit = rtcache_net_exit,
-+};
-+
-+static int __init nf_conntrack_rtcache_init(void)
-+{
-+ int ret = nf_ct_extend_register(&rtcache_extend);
-+
-+ if (ret < 0) {
-+ pr_err("nf_conntrack_rtcache: Unable to register extension\n");
-+ return ret;
-+ }
-+
-+ ret = register_pernet_subsys(&rtcache_ops_net_ops);
-+ if (ret) {
-+ nf_ct_extend_unregister(&rtcache_extend);
-+ return ret;
-+ }
-+
-+ ret = register_netdevice_notifier(&nf_rtcache_notifier);
-+ if (ret) {
-+ nf_ct_extend_unregister(&rtcache_extend);
-+ unregister_pernet_subsys(&rtcache_ops_net_ops);
-+ }
-+
-+ return ret;
-+}
-+
-+static int nf_rtcache_ext_remove(struct nf_conn *ct, void *data)
-+{
-+ struct nf_conn_rtcache *rtc = nf_ct_rtcache_find(ct);
-+
-+ return rtc != NULL;
-+}
-+
-+static bool __exit nf_conntrack_rtcache_wait_for_dying(struct net *net)
-+{
-+ bool wait = false;
-+ int cpu;
-+
-+ for_each_possible_cpu(cpu) {
-+ struct nf_conntrack_tuple_hash *h;
-+ struct hlist_nulls_node *n;
-+ struct nf_conn *ct;
-+ struct ct_pcpu *pcpu = per_cpu_ptr(net->ct.pcpu_lists, cpu);
-+
-+ rcu_read_lock();
-+ spin_lock_bh(&pcpu->lock);
-+
-+ hlist_nulls_for_each_entry(h, n, &pcpu->dying, hnnode) {
-+ ct = nf_ct_tuplehash_to_ctrack(h);
-+ if (nf_ct_rtcache_find(ct) != NULL) {
-+ wait = true;
-+ break;
-+ }
-+ }
-+ spin_unlock_bh(&pcpu->lock);
-+ rcu_read_unlock();
-+ }
-+
-+ return wait;
-+}
-+
-+static void __exit nf_conntrack_rtcache_fini(void)
-+{
-+ struct net *net;
-+ int count = 0;
-+
-+ synchronize_net();
-+
-+ unregister_netdevice_notifier(&nf_rtcache_notifier);
-+ unregister_pernet_subsys(&rtcache_ops_net_ops);
-+
-+ synchronize_net();
-+
-+ rtnl_lock();
-+
-+ /* zap all conntracks with rtcache extension */
-+ for_each_net(net)
-+ nf_ct_iterate_cleanup_net(net, nf_rtcache_ext_remove, NULL, 0, 0);
-+
-+ for_each_net(net) {
-+ /* .. and make sure they're gone from dying list, too */
-+ while (nf_conntrack_rtcache_wait_for_dying(net)) {
-+ msleep(200);
-+ WARN_ONCE(++count > 25, "Waiting for all rtcache conntracks to go away\n");
-+ }
-+ }
-+
-+ rtnl_unlock();
-+
-+ synchronize_net();
-+ nf_ct_extend_unregister(&rtcache_extend);
-+}
-+module_init(nf_conntrack_rtcache_init);
-+module_exit(nf_conntrack_rtcache_fini);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Florian Westphal <fw@strlen.de>");
-+MODULE_DESCRIPTION("Conntrack route cache extension");
+++ /dev/null
-From 1186af457cc186c5ed01708da71b1ffbdf0a2638 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 20 Nov 2018 09:55:45 +0100
-Subject: [PATCH] mtd: keep original flags for every struct mtd_info
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-When allocating a new partition mtd subsystem runs internal tests in the
-allocate_partition(). They may result in modifying specified flags (e.g.
-dropping some /features/ like write access).
-
-Those constraints don't have to be necessary true for subpartitions. It
-may happen parent partition isn't block aligned (effectively disabling
-write access) while subpartition may fit blocks nicely. In such case all
-checks should be run again (starting with original flags value).
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
----
- drivers/mtd/mtdcore.c | 2 ++
- drivers/mtd/mtdpart.c | 3 ++-
- include/linux/mtd/mtd.h | 1 +
- 3 files changed, 5 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
-@@ -665,6 +665,8 @@ static void mtd_set_dev_defaults(struct
- } else {
- pr_debug("mtd device won't show a device symlink in sysfs\n");
- }
-+
-+ mtd->orig_flags = mtd->flags;
- }
-
- /**
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -346,7 +346,8 @@ static struct mtd_part *allocate_partiti
-
- /* set up the MTD object for this partition */
- slave->mtd.type = parent->type;
-- slave->mtd.flags = parent->flags & ~part->mask_flags;
-+ slave->mtd.flags = parent->orig_flags & ~part->mask_flags;
-+ slave->mtd.orig_flags = slave->mtd.flags;
- slave->mtd.size = part->size;
- slave->mtd.writesize = parent->writesize;
- slave->mtd.writebufsize = parent->writebufsize;
---- a/include/linux/mtd/mtd.h
-+++ b/include/linux/mtd/mtd.h
-@@ -207,6 +207,7 @@ struct mtd_debug_info {
- struct mtd_info {
- u_char type;
- uint32_t flags;
-+ uint32_t orig_flags; /* Flags as before running mtd checks */
- uint64_t size; // Total size of the MTD
-
- /* "Major" erase size for the device. Naïve users may take this
+++ /dev/null
-From 6750f61a13a0197c40e4a40739117493b15f19e8 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 20 Nov 2018 10:24:09 +0100
-Subject: [PATCH] mtd: improve calculating partition boundaries when checking
- for alignment
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-When checking for alignment mtd should check absolute offsets. It's
-important for subpartitions as it doesn't make sense to check their
-relative addresses.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
----
- drivers/mtd/mtdpart.c | 13 +++++++++++--
- 1 file changed, 11 insertions(+), 2 deletions(-)
-
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -61,6 +61,15 @@ static inline struct mtd_part *mtd_to_pa
- return container_of(mtd, struct mtd_part, mtd);
- }
-
-+static u64 part_absolute_offset(struct mtd_info *mtd)
-+{
-+ struct mtd_part *part = mtd_to_part(mtd);
-+
-+ if (!mtd_is_partition(mtd))
-+ return 0;
-+
-+ return part_absolute_offset(part->parent) + part->offset;
-+}
-
- /*
- * MTD methods which simply translate the effective address and pass through
-@@ -518,7 +527,7 @@ static struct mtd_part *allocate_partiti
- if (!(slave->mtd.flags & MTD_NO_ERASE))
- wr_alignment = slave->mtd.erasesize;
-
-- tmp = slave->offset;
-+ tmp = part_absolute_offset(parent) + slave->offset;
- remainder = do_div(tmp, wr_alignment);
- if ((slave->mtd.flags & MTD_WRITEABLE) && remainder) {
- /* Doesn't start on a boundary of major erase size */
-@@ -529,7 +538,7 @@ static struct mtd_part *allocate_partiti
- part->name);
- }
-
-- tmp = slave->mtd.size;
-+ tmp = part_absolute_offset(parent) + slave->mtd.size;
- remainder = do_div(tmp, wr_alignment);
- if ((slave->mtd.flags & MTD_WRITEABLE) && remainder) {
- slave->mtd.flags &= ~MTD_WRITEABLE;
+++ /dev/null
-From 5a1c18b761ddb299a06746948b9ec2814b04fa92 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 2 Jan 2019 00:00:01 +0100
-Subject: [PATCH] bcma: keep a direct pointer to the struct device
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Accessing struct device is pretty useful/common so having a direct
-pointer:
-1) Simplifies some code
-2) Makes bcma_bus_get_host_dev() unneeded
-3) Allows further improvements like using dev_* printing helpers
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/bcma/bcma_private.h | 1 -
- drivers/bcma/driver_gpio.c | 2 +-
- drivers/bcma/host_pci.c | 2 ++
- drivers/bcma/host_soc.c | 4 ++--
- drivers/bcma/main.c | 45 +++++++++----------------------------
- include/linux/bcma/bcma.h | 11 +++------
- 6 files changed, 18 insertions(+), 47 deletions(-)
-
---- a/drivers/bcma/bcma_private.h
-+++ b/drivers/bcma/bcma_private.h
-@@ -33,7 +33,6 @@ int __init bcma_bus_early_register(struc
- int bcma_bus_suspend(struct bcma_bus *bus);
- int bcma_bus_resume(struct bcma_bus *bus);
- #endif
--struct device *bcma_bus_get_host_dev(struct bcma_bus *bus);
-
- /* scan.c */
- void bcma_detect_chip(struct bcma_bus *bus);
---- a/drivers/bcma/driver_gpio.c
-+++ b/drivers/bcma/driver_gpio.c
-@@ -183,7 +183,7 @@ int bcma_gpio_init(struct bcma_drv_cc *c
- chip->direction_input = bcma_gpio_direction_input;
- chip->direction_output = bcma_gpio_direction_output;
- chip->owner = THIS_MODULE;
-- chip->parent = bcma_bus_get_host_dev(bus);
-+ chip->parent = bus->dev;
- #if IS_BUILTIN(CONFIG_OF)
- chip->of_node = cc->core->dev.of_node;
- #endif
---- a/drivers/bcma/host_pci.c
-+++ b/drivers/bcma/host_pci.c
-@@ -196,6 +196,8 @@ static int bcma_host_pci_probe(struct pc
- goto err_pci_release_regions;
- }
-
-+ bus->dev = &dev->dev;
-+
- /* Map MMIO */
- err = -ENOMEM;
- bus->mmio = pci_iomap(dev, 0, ~0UL);
---- a/drivers/bcma/host_soc.c
-+++ b/drivers/bcma/host_soc.c
-@@ -179,7 +179,6 @@ int __init bcma_host_soc_register(struct
- /* Host specific */
- bus->hosttype = BCMA_HOSTTYPE_SOC;
- bus->ops = &bcma_host_soc_ops;
-- bus->host_pdev = NULL;
-
- /* Initialize struct, detect chip */
- bcma_init_bus(bus);
-@@ -213,6 +212,8 @@ static int bcma_host_soc_probe(struct pl
- if (!bus)
- return -ENOMEM;
-
-+ bus->dev = dev;
-+
- /* Map MMIO */
- bus->mmio = of_iomap(np, 0);
- if (!bus->mmio)
-@@ -221,7 +222,6 @@ static int bcma_host_soc_probe(struct pl
- /* Host specific */
- bus->hosttype = BCMA_HOSTTYPE_SOC;
- bus->ops = &bcma_host_soc_ops;
-- bus->host_pdev = pdev;
-
- /* Initialize struct, detect chip */
- bcma_init_bus(bus);
---- a/drivers/bcma/main.c
-+++ b/drivers/bcma/main.c
-@@ -223,8 +223,8 @@ unsigned int bcma_core_irq(struct bcma_d
- mips_irq = bcma_core_mips_irq(core);
- return mips_irq <= 4 ? mips_irq + 2 : 0;
- }
-- if (bus->host_pdev)
-- return bcma_of_get_irq(&bus->host_pdev->dev, core, num);
-+ if (bus->dev)
-+ return bcma_of_get_irq(bus->dev, core, num);
- return 0;
- case BCMA_HOSTTYPE_SDIO:
- return 0;
-@@ -239,18 +239,18 @@ void bcma_prepare_core(struct bcma_bus *
- core->dev.release = bcma_release_core_dev;
- core->dev.bus = &bcma_bus_type;
- dev_set_name(&core->dev, "bcma%d:%d", bus->num, core->core_index);
-- core->dev.parent = bcma_bus_get_host_dev(bus);
-- if (core->dev.parent)
-- bcma_of_fill_device(core->dev.parent, core);
-+ core->dev.parent = bus->dev;
-+ if (bus->dev)
-+ bcma_of_fill_device(bus->dev, core);
-
- switch (bus->hosttype) {
- case BCMA_HOSTTYPE_PCI:
-- core->dma_dev = &bus->host_pci->dev;
-+ core->dma_dev = bus->dev;
- core->irq = bus->host_pci->irq;
- break;
- case BCMA_HOSTTYPE_SOC:
-- if (IS_ENABLED(CONFIG_OF) && bus->host_pdev) {
-- core->dma_dev = &bus->host_pdev->dev;
-+ if (IS_ENABLED(CONFIG_OF) && bus->dev) {
-+ core->dma_dev = bus->dev;
- } else {
- core->dev.dma_mask = &core->dev.coherent_dma_mask;
- core->dma_dev = &core->dev;
-@@ -261,28 +261,6 @@ void bcma_prepare_core(struct bcma_bus *
- }
- }
-
--struct device *bcma_bus_get_host_dev(struct bcma_bus *bus)
--{
-- switch (bus->hosttype) {
-- case BCMA_HOSTTYPE_PCI:
-- if (bus->host_pci)
-- return &bus->host_pci->dev;
-- else
-- return NULL;
-- case BCMA_HOSTTYPE_SOC:
-- if (bus->host_pdev)
-- return &bus->host_pdev->dev;
-- else
-- return NULL;
-- case BCMA_HOSTTYPE_SDIO:
-- if (bus->host_sdio)
-- return &bus->host_sdio->dev;
-- else
-- return NULL;
-- }
-- return NULL;
--}
--
- void bcma_init_bus(struct bcma_bus *bus)
- {
- mutex_lock(&bcma_buses_mutex);
-@@ -402,7 +380,6 @@ int bcma_bus_register(struct bcma_bus *b
- {
- int err;
- struct bcma_device *core;
-- struct device *dev;
-
- /* Scan for devices (cores) */
- err = bcma_bus_scan(bus);
-@@ -425,10 +402,8 @@ int bcma_bus_register(struct bcma_bus *b
- bcma_core_pci_early_init(&bus->drv_pci[0]);
- }
-
-- dev = bcma_bus_get_host_dev(bus);
-- if (dev) {
-- of_platform_default_populate(dev->of_node, NULL, dev);
-- }
-+ if (bus->dev)
-+ of_platform_default_populate(bus->dev->of_node, NULL, bus->dev);
-
- /* Cores providing flash access go before SPROM init */
- list_for_each_entry(core, &bus->cores, list) {
---- a/include/linux/bcma/bcma.h
-+++ b/include/linux/bcma/bcma.h
-@@ -332,6 +332,8 @@ extern int bcma_arch_register_fallback_s
- struct ssb_sprom *out));
-
- struct bcma_bus {
-+ struct device *dev;
-+
- /* The MMIO area. */
- void __iomem *mmio;
-
-@@ -339,14 +341,7 @@ struct bcma_bus {
-
- enum bcma_hosttype hosttype;
- bool host_is_pcie2; /* Used for BCMA_HOSTTYPE_PCI only */
-- union {
-- /* Pointer to the PCI bus (only for BCMA_HOSTTYPE_PCI) */
-- struct pci_dev *host_pci;
-- /* Pointer to the SDIO device (only for BCMA_HOSTTYPE_SDIO) */
-- struct sdio_func *host_sdio;
-- /* Pointer to platform device (only for BCMA_HOSTTYPE_SOC) */
-- struct platform_device *host_pdev;
-- };
-+ struct pci_dev *host_pci; /* PCI bus pointer (BCMA_HOSTTYPE_PCI only) */
-
- struct bcma_chipinfo chipinfo;
-
+++ /dev/null
-From 777bc4801a6868fcbff09ffb6e30f023e7c5ed38 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 2 Jan 2019 00:00:02 +0100
-Subject: [PATCH] bcma: use dev_* printing functions
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It provides more meaningful messages.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
----
- drivers/bcma/bcma_private.h | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/drivers/bcma/bcma_private.h
-+++ b/drivers/bcma/bcma_private.h
-@@ -10,13 +10,13 @@
- #include <linux/delay.h>
-
- #define bcma_err(bus, fmt, ...) \
-- pr_err("bus%d: " fmt, (bus)->num, ##__VA_ARGS__)
-+ dev_err((bus)->dev, "bus%d: " fmt, (bus)->num, ##__VA_ARGS__)
- #define bcma_warn(bus, fmt, ...) \
-- pr_warn("bus%d: " fmt, (bus)->num, ##__VA_ARGS__)
-+ dev_warn((bus)->dev, "bus%d: " fmt, (bus)->num, ##__VA_ARGS__)
- #define bcma_info(bus, fmt, ...) \
-- pr_info("bus%d: " fmt, (bus)->num, ##__VA_ARGS__)
-+ dev_info((bus)->dev, "bus%d: " fmt, (bus)->num, ##__VA_ARGS__)
- #define bcma_debug(bus, fmt, ...) \
-- pr_debug("bus%d: " fmt, (bus)->num, ##__VA_ARGS__)
-+ dev_dbg((bus)->dev, "bus%d: " fmt, (bus)->num, ##__VA_ARGS__)
-
- struct bcma_bus;
-
+++ /dev/null
-From 46bf067870156abd61fe24d14c2486d15b8b502c Mon Sep 17 00:00:00 2001
-From: Dave Taht <dave@taht.net>
-Date: Fri, 14 Dec 2018 18:38:40 +0000
-Subject: [PATCH 1/1] Allow class-e address assignment in ifconfig and early
- boot
-
-While the linux kernel became mostly "class-e clean" a decade ago,
-and most distributions long ago switched to the iproute2 suite
-of utilities, which allow class-e (240.0.0.0/4) address assignment,
-distributions relying on busybox, toybox and other forms of
-ifconfig cannot assign class-e addresses without this kernel patch.
-
-With this patch, also, a boot command line on these addresses is feasible:
-(ip=248.0.1.2::248.0.1.1:255.255.255.0).
-
-While CIDR has been obsolete for 2 decades, and a survey of all the
-userspace open source code in the world shows most IN_whatever macros
-are also obsolete... rather than obsolete CIDR from this ioctl entirely,
-this patch merely enables class-e assignment, sanely.
-
-H/T to Vince Fuller and his original patch here:
- https://lkml.org/lkml/2008/1/7/370
-
-Signed-off-by: Dave Taht <dave.taht@gmail.com>
-Reviewed-by: John Gilmore <gnu@toad.com>
----
- include/uapi/linux/in.h | 8 ++++++--
- net/ipv4/devinet.c | 4 +++-
- net/ipv4/ipconfig.c | 2 ++
- 3 files changed, 11 insertions(+), 3 deletions(-)
-
---- a/include/uapi/linux/in.h
-+++ b/include/uapi/linux/in.h
-@@ -268,8 +268,12 @@ struct sockaddr_in {
- #define IN_MULTICAST(a) IN_CLASSD(a)
- #define IN_MULTICAST_NET 0xF0000000
-
--#define IN_EXPERIMENTAL(a) ((((long int) (a)) & 0xf0000000) == 0xf0000000)
--#define IN_BADCLASS(a) IN_EXPERIMENTAL((a))
-+#define IN_BADCLASS(a) (((long int) (a) ) == (long int)0xffffffff)
-+#define IN_EXPERIMENTAL(a) IN_BADCLASS((a))
-+
-+#define IN_CLASSE(a) ((((long int) (a)) & 0xf0000000) == 0xf0000000)
-+#define IN_CLASSE_NET 0xffffffff
-+#define IN_CLASSE_NSHIFT 0
-
- /* Address to accept any incoming messages. */
- #define INADDR_ANY ((unsigned long int) 0x00000000)
---- a/net/ipv4/devinet.c
-+++ b/net/ipv4/devinet.c
-@@ -955,7 +955,7 @@ static int inet_abc_len(__be32 addr)
- {
- int rc = -1; /* Something else, probably a multicast. */
-
-- if (ipv4_is_zeronet(addr))
-+ if (ipv4_is_zeronet(addr) || ipv4_is_lbcast(addr))
- rc = 0;
- else {
- __u32 haddr = ntohl(addr);
-@@ -966,6 +966,8 @@ static int inet_abc_len(__be32 addr)
- rc = 16;
- else if (IN_CLASSC(haddr))
- rc = 24;
-+ else if (IN_CLASSE(haddr))
-+ rc = 32;
- }
-
- return rc;
---- a/net/ipv4/ipconfig.c
-+++ b/net/ipv4/ipconfig.c
-@@ -429,6 +429,8 @@ static int __init ic_defaults(void)
- ic_netmask = htonl(IN_CLASSB_NET);
- else if (IN_CLASSC(ntohl(ic_myaddr)))
- ic_netmask = htonl(IN_CLASSC_NET);
-+ else if (IN_CLASSE(ntohl(ic_myaddr)))
-+ ic_netmask = htonl(IN_CLASSE_NET);
- else {
- pr_err("IP-Config: Unable to guess netmask for address %pI4\n",
- &ic_myaddr);
+++ /dev/null
-From 4cc30de79d293f1e8c5f50ae3a9c005def9564a0 Mon Sep 17 00:00:00 2001
-From: Koen Vandeputte <koen.vandeputte@ncentric.com>
-Date: Mon, 7 Jan 2019 14:14:27 +0100
-Subject: [PATCH 2/2] arm: cns3xxx: use actual size reads for PCIe
-
-commit 802b7c06adc7 ("ARM: cns3xxx: Convert PCI to use generic config accessors")
-reimplemented cns3xxx_pci_read_config() using pci_generic_config_read32(),
-which preserved the property of only doing 32-bit reads.
-
-It also replaced cns3xxx_pci_write_config() with pci_generic_config_write(),
-so it changed writes from always being 32 bits to being the actual size,
-which works just fine.
-
-Due to:
-- The documentation does not mention that only 32 bit access is allowed.
-- Writes are already executed using the actual size
-- Extensive testing shows that 8b, 16b and 32b reads work as intended
-
-It makes perfectly sense to also swap 32 bit reading in favor of actual size.
-
-Fixes: 802b7c06adc7 ("ARM: cns3xxx: Convert PCI to use generic config accessors")
-Suggested-by: Bjorn Helgaas <bhelgaas@google.com>
-Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
-CC: Arnd Bergmann <arnd@arndb.de>
-CC: Krzysztof Halasa <khalasa@piap.pl>
-CC: Olof Johansson <olof@lixom.net>
-CC: Robin Leblon <robin.leblon@ncentric.com>
-CC: Rob Herring <robh@kernel.org>
-CC: Russell King <linux@armlinux.org.uk>
-CC: Tim Harvey <tharvey@gateworks.com>
-CC: stable@vger.kernel.org # v4.0+
----
- arch/arm/mach-cns3xxx/pcie.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm/mach-cns3xxx/pcie.c
-+++ b/arch/arm/mach-cns3xxx/pcie.c
-@@ -93,7 +93,7 @@ static int cns3xxx_pci_read_config(struc
- u32 mask = (0x1ull << (size * 8)) - 1;
- int shift = (where % 4) * 8;
-
-- ret = pci_generic_config_read32(bus, devfn, where, size, val);
-+ ret = pci_generic_config_read(bus, devfn, where, size, val);
-
- if (ret == PCIBIOS_SUCCESSFUL && !bus->number && !devfn &&
- (where & 0xffc) == PCI_CLASS_REVISION)
+++ /dev/null
-From 28b5c129ca6e585ec95c160ec4297bc6c6360b6f Mon Sep 17 00:00:00 2001
-From: Minas Harutyunyan <minas.harutyunyan@synopsys.com>
-Date: Mon, 4 Mar 2019 17:08:07 +0400
-Subject: usb: dwc2: Set lpm mode parameters depend on HW configuration
-
-If core not supported lpm, i.e. BCM2835 then confusing warnings seen
-in log.
-
-To avoid these warnings, added function dwc2_set_param_lpm() to set
-lpm and other lpm related parameters based on lpm support by core.
-
-Signed-off-by: Minas Harutyunyan <hminas@synopsys.com>
-Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
----
- drivers/usb/dwc2/params.c | 23 ++++++++++++++++++-----
- 1 file changed, 18 insertions(+), 5 deletions(-)
-
---- a/drivers/usb/dwc2/params.c
-+++ b/drivers/usb/dwc2/params.c
-@@ -273,6 +273,23 @@ static void dwc2_set_param_power_down(st
- hsotg->params.power_down = val;
- }
-
-+static void dwc2_set_param_lpm(struct dwc2_hsotg *hsotg)
-+{
-+ struct dwc2_core_params *p = &hsotg->params;
-+
-+ p->lpm = hsotg->hw_params.lpm_mode;
-+ if (p->lpm) {
-+ p->lpm_clock_gating = true;
-+ p->besl = true;
-+ p->hird_threshold_en = true;
-+ p->hird_threshold = 4;
-+ } else {
-+ p->lpm_clock_gating = false;
-+ p->besl = false;
-+ p->hird_threshold_en = false;
-+ }
-+}
-+
- /**
- * dwc2_set_default_params() - Set all core parameters to their
- * auto-detected default values.
-@@ -291,6 +308,7 @@ static void dwc2_set_default_params(stru
- dwc2_set_param_speed(hsotg);
- dwc2_set_param_phy_utmi_width(hsotg);
- dwc2_set_param_power_down(hsotg);
-+ dwc2_set_param_lpm(hsotg);
- p->phy_ulpi_ddr = false;
- p->phy_ulpi_ext_vbus = false;
-
-@@ -303,11 +321,6 @@ static void dwc2_set_default_params(stru
- p->reload_ctl = (hw->snpsid >= DWC2_CORE_REV_2_92a);
- p->uframe_sched = true;
- p->external_id_pin_ctl = false;
-- p->lpm = true;
-- p->lpm_clock_gating = true;
-- p->besl = true;
-- p->hird_threshold_en = true;
-- p->hird_threshold = 4;
- p->ipg_isoc_en = false;
- p->max_packet_count = hw->max_packet_count;
- p->max_transfer_size = hw->max_transfer_size;
+++ /dev/null
-From 9966a05c7b80f075f2bc7e48dbb108d3f2927234 Mon Sep 17 00:00:00 2001
-From: Dave Martin <Dave.Martin@arm.com>
-Date: Fri, 4 Jan 2019 13:09:51 +0000
-Subject: [PATCH] arm64/sve: Disentangle <uapi/asm/ptrace.h> from
- <uapi/asm/sigcontext.h>
-
-Currently, <uapi/asm/sigcontext.h> provides common definitions for
-describing SVE context structures that are also used by the ptrace
-definitions in <uapi/asm/ptrace.h>.
-
-For this reason, a #include of <asm/sigcontext.h> was added in
-ptrace.h, but it this turns out that this can interact badly with
-userspace code that tries to include ptrace.h on top of the libc
-headers (which may provide their own shadow definitions for
-sigcontext.h).
-
-To make the headers easier for userspace to consume, this patch
-bounces the common definitions into an __SVE_* namespace and moves
-them to a backend header <uapi/asm/sve_context.h> that can be
-included by the other headers as appropriate. This should allow
-ptrace.h to be used alongside libc's sigcontext.h (if any) without
-ill effects.
-
-This should make the situation unambiguous: <asm/sigcontext.h> is
-the header to include for the sigframe-specific definitions, while
-<asm/ptrace.h> is the header to include for ptrace-specific
-definitions.
-
-To avoid conflicting with existing usage, <asm/sigcontext.h>
-remains the canonical way to get the common definitions for
-SVE_VQ_MIN, sve_vq_from_vl() etc., both in userspace and in the
-kernel: relying on these being defined as a side effect of
-including just <asm/ptrace.h> was never intended to be safe.
-
-Signed-off-by: Dave Martin <Dave.Martin@arm.com>
-Signed-off-by: Will Deacon <will.deacon@arm.com>
----
- arch/arm64/include/uapi/asm/ptrace.h | 39 ++++++++--------
- arch/arm64/include/uapi/asm/sigcontext.h | 56 +++++++++++------------
- arch/arm64/include/uapi/asm/sve_context.h | 53 +++++++++++++++++++++
- 3 files changed, 99 insertions(+), 49 deletions(-)
- create mode 100644 arch/arm64/include/uapi/asm/sve_context.h
-
---- a/arch/arm64/include/uapi/asm/ptrace.h
-+++ b/arch/arm64/include/uapi/asm/ptrace.h
-@@ -23,7 +23,7 @@
- #include <linux/types.h>
-
- #include <asm/hwcap.h>
--#include <asm/sigcontext.h>
-+#include <asm/sve_context.h>
-
-
- /*
-@@ -129,9 +129,9 @@ struct user_sve_header {
- */
-
- /* Offset from the start of struct user_sve_header to the register data */
--#define SVE_PT_REGS_OFFSET \
-- ((sizeof(struct user_sve_header) + (SVE_VQ_BYTES - 1)) \
-- / SVE_VQ_BYTES * SVE_VQ_BYTES)
-+#define SVE_PT_REGS_OFFSET \
-+ ((sizeof(struct user_sve_header) + (__SVE_VQ_BYTES - 1)) \
-+ / __SVE_VQ_BYTES * __SVE_VQ_BYTES)
-
- /*
- * The register data content and layout depends on the value of the
-@@ -177,39 +177,36 @@ struct user_sve_header {
- * Additional data might be appended in the future.
- */
-
--#define SVE_PT_SVE_ZREG_SIZE(vq) SVE_SIG_ZREG_SIZE(vq)
--#define SVE_PT_SVE_PREG_SIZE(vq) SVE_SIG_PREG_SIZE(vq)
--#define SVE_PT_SVE_FFR_SIZE(vq) SVE_SIG_FFR_SIZE(vq)
-+#define SVE_PT_SVE_ZREG_SIZE(vq) __SVE_ZREG_SIZE(vq)
-+#define SVE_PT_SVE_PREG_SIZE(vq) __SVE_PREG_SIZE(vq)
-+#define SVE_PT_SVE_FFR_SIZE(vq) __SVE_FFR_SIZE(vq)
- #define SVE_PT_SVE_FPSR_SIZE sizeof(__u32)
- #define SVE_PT_SVE_FPCR_SIZE sizeof(__u32)
-
--#define __SVE_SIG_TO_PT(offset) \
-- ((offset) - SVE_SIG_REGS_OFFSET + SVE_PT_REGS_OFFSET)
--
- #define SVE_PT_SVE_OFFSET SVE_PT_REGS_OFFSET
-
- #define SVE_PT_SVE_ZREGS_OFFSET \
-- __SVE_SIG_TO_PT(SVE_SIG_ZREGS_OFFSET)
-+ (SVE_PT_REGS_OFFSET + __SVE_ZREGS_OFFSET)
- #define SVE_PT_SVE_ZREG_OFFSET(vq, n) \
-- __SVE_SIG_TO_PT(SVE_SIG_ZREG_OFFSET(vq, n))
-+ (SVE_PT_REGS_OFFSET + __SVE_ZREG_OFFSET(vq, n))
- #define SVE_PT_SVE_ZREGS_SIZE(vq) \
-- (SVE_PT_SVE_ZREG_OFFSET(vq, SVE_NUM_ZREGS) - SVE_PT_SVE_ZREGS_OFFSET)
-+ (SVE_PT_SVE_ZREG_OFFSET(vq, __SVE_NUM_ZREGS) - SVE_PT_SVE_ZREGS_OFFSET)
-
- #define SVE_PT_SVE_PREGS_OFFSET(vq) \
-- __SVE_SIG_TO_PT(SVE_SIG_PREGS_OFFSET(vq))
-+ (SVE_PT_REGS_OFFSET + __SVE_PREGS_OFFSET(vq))
- #define SVE_PT_SVE_PREG_OFFSET(vq, n) \
-- __SVE_SIG_TO_PT(SVE_SIG_PREG_OFFSET(vq, n))
-+ (SVE_PT_REGS_OFFSET + __SVE_PREG_OFFSET(vq, n))
- #define SVE_PT_SVE_PREGS_SIZE(vq) \
-- (SVE_PT_SVE_PREG_OFFSET(vq, SVE_NUM_PREGS) - \
-+ (SVE_PT_SVE_PREG_OFFSET(vq, __SVE_NUM_PREGS) - \
- SVE_PT_SVE_PREGS_OFFSET(vq))
-
- #define SVE_PT_SVE_FFR_OFFSET(vq) \
-- __SVE_SIG_TO_PT(SVE_SIG_FFR_OFFSET(vq))
-+ (SVE_PT_REGS_OFFSET + __SVE_FFR_OFFSET(vq))
-
- #define SVE_PT_SVE_FPSR_OFFSET(vq) \
- ((SVE_PT_SVE_FFR_OFFSET(vq) + SVE_PT_SVE_FFR_SIZE(vq) + \
-- (SVE_VQ_BYTES - 1)) \
-- / SVE_VQ_BYTES * SVE_VQ_BYTES)
-+ (__SVE_VQ_BYTES - 1)) \
-+ / __SVE_VQ_BYTES * __SVE_VQ_BYTES)
- #define SVE_PT_SVE_FPCR_OFFSET(vq) \
- (SVE_PT_SVE_FPSR_OFFSET(vq) + SVE_PT_SVE_FPSR_SIZE)
-
-@@ -220,8 +217,8 @@ struct user_sve_header {
-
- #define SVE_PT_SVE_SIZE(vq, flags) \
- ((SVE_PT_SVE_FPCR_OFFSET(vq) + SVE_PT_SVE_FPCR_SIZE \
-- - SVE_PT_SVE_OFFSET + (SVE_VQ_BYTES - 1)) \
-- / SVE_VQ_BYTES * SVE_VQ_BYTES)
-+ - SVE_PT_SVE_OFFSET + (__SVE_VQ_BYTES - 1)) \
-+ / __SVE_VQ_BYTES * __SVE_VQ_BYTES)
-
- #define SVE_PT_SIZE(vq, flags) \
- (((flags) & SVE_PT_REGS_MASK) == SVE_PT_REGS_SVE ? \
---- a/arch/arm64/include/uapi/asm/sigcontext.h
-+++ b/arch/arm64/include/uapi/asm/sigcontext.h
-@@ -130,6 +130,8 @@ struct sve_context {
-
- #endif /* !__ASSEMBLY__ */
-
-+#include <asm/sve_context.h>
-+
- /*
- * The SVE architecture leaves space for future expansion of the
- * vector length beyond its initial architectural limit of 2048 bits
-@@ -138,21 +140,20 @@ struct sve_context {
- * See linux/Documentation/arm64/sve.txt for a description of the VL/VQ
- * terminology.
- */
--#define SVE_VQ_BYTES 16 /* number of bytes per quadword */
-+#define SVE_VQ_BYTES __SVE_VQ_BYTES /* bytes per quadword */
-
--#define SVE_VQ_MIN 1
--#define SVE_VQ_MAX 512
-+#define SVE_VQ_MIN __SVE_VQ_MIN
-+#define SVE_VQ_MAX __SVE_VQ_MAX
-
--#define SVE_VL_MIN (SVE_VQ_MIN * SVE_VQ_BYTES)
--#define SVE_VL_MAX (SVE_VQ_MAX * SVE_VQ_BYTES)
-+#define SVE_VL_MIN __SVE_VL_MIN
-+#define SVE_VL_MAX __SVE_VL_MAX
-
--#define SVE_NUM_ZREGS 32
--#define SVE_NUM_PREGS 16
-+#define SVE_NUM_ZREGS __SVE_NUM_ZREGS
-+#define SVE_NUM_PREGS __SVE_NUM_PREGS
-
--#define sve_vl_valid(vl) \
-- ((vl) % SVE_VQ_BYTES == 0 && (vl) >= SVE_VL_MIN && (vl) <= SVE_VL_MAX)
--#define sve_vq_from_vl(vl) ((vl) / SVE_VQ_BYTES)
--#define sve_vl_from_vq(vq) ((vq) * SVE_VQ_BYTES)
-+#define sve_vl_valid(vl) __sve_vl_valid(vl)
-+#define sve_vq_from_vl(vl) __sve_vq_from_vl(vl)
-+#define sve_vl_from_vq(vq) __sve_vl_from_vq(vq)
-
- /*
- * If the SVE registers are currently live for the thread at signal delivery,
-@@ -205,34 +206,33 @@ struct sve_context {
- * Additional data might be appended in the future.
- */
-
--#define SVE_SIG_ZREG_SIZE(vq) ((__u32)(vq) * SVE_VQ_BYTES)
--#define SVE_SIG_PREG_SIZE(vq) ((__u32)(vq) * (SVE_VQ_BYTES / 8))
--#define SVE_SIG_FFR_SIZE(vq) SVE_SIG_PREG_SIZE(vq)
-+#define SVE_SIG_ZREG_SIZE(vq) __SVE_ZREG_SIZE(vq)
-+#define SVE_SIG_PREG_SIZE(vq) __SVE_PREG_SIZE(vq)
-+#define SVE_SIG_FFR_SIZE(vq) __SVE_FFR_SIZE(vq)
-
- #define SVE_SIG_REGS_OFFSET \
-- ((sizeof(struct sve_context) + (SVE_VQ_BYTES - 1)) \
-- / SVE_VQ_BYTES * SVE_VQ_BYTES)
-+ ((sizeof(struct sve_context) + (__SVE_VQ_BYTES - 1)) \
-+ / __SVE_VQ_BYTES * __SVE_VQ_BYTES)
-
--#define SVE_SIG_ZREGS_OFFSET SVE_SIG_REGS_OFFSET
-+#define SVE_SIG_ZREGS_OFFSET \
-+ (SVE_SIG_REGS_OFFSET + __SVE_ZREGS_OFFSET)
- #define SVE_SIG_ZREG_OFFSET(vq, n) \
-- (SVE_SIG_ZREGS_OFFSET + SVE_SIG_ZREG_SIZE(vq) * (n))
--#define SVE_SIG_ZREGS_SIZE(vq) \
-- (SVE_SIG_ZREG_OFFSET(vq, SVE_NUM_ZREGS) - SVE_SIG_ZREGS_OFFSET)
-+ (SVE_SIG_REGS_OFFSET + __SVE_ZREG_OFFSET(vq, n))
-+#define SVE_SIG_ZREGS_SIZE(vq) __SVE_ZREGS_SIZE(vq)
-
- #define SVE_SIG_PREGS_OFFSET(vq) \
-- (SVE_SIG_ZREGS_OFFSET + SVE_SIG_ZREGS_SIZE(vq))
-+ (SVE_SIG_REGS_OFFSET + __SVE_PREGS_OFFSET(vq))
- #define SVE_SIG_PREG_OFFSET(vq, n) \
-- (SVE_SIG_PREGS_OFFSET(vq) + SVE_SIG_PREG_SIZE(vq) * (n))
--#define SVE_SIG_PREGS_SIZE(vq) \
-- (SVE_SIG_PREG_OFFSET(vq, SVE_NUM_PREGS) - SVE_SIG_PREGS_OFFSET(vq))
-+ (SVE_SIG_REGS_OFFSET + __SVE_PREG_OFFSET(vq, n))
-+#define SVE_SIG_PREGS_SIZE(vq) __SVE_PREGS_SIZE(vq)
-
- #define SVE_SIG_FFR_OFFSET(vq) \
-- (SVE_SIG_PREGS_OFFSET(vq) + SVE_SIG_PREGS_SIZE(vq))
-+ (SVE_SIG_REGS_OFFSET + __SVE_FFR_OFFSET(vq))
-
- #define SVE_SIG_REGS_SIZE(vq) \
-- (SVE_SIG_FFR_OFFSET(vq) + SVE_SIG_FFR_SIZE(vq) - SVE_SIG_REGS_OFFSET)
--
--#define SVE_SIG_CONTEXT_SIZE(vq) (SVE_SIG_REGS_OFFSET + SVE_SIG_REGS_SIZE(vq))
-+ (__SVE_FFR_OFFSET(vq) + __SVE_FFR_SIZE(vq))
-
-+#define SVE_SIG_CONTEXT_SIZE(vq) \
-+ (SVE_SIG_REGS_OFFSET + SVE_SIG_REGS_SIZE(vq))
-
- #endif /* _UAPI__ASM_SIGCONTEXT_H */
---- /dev/null
-+++ b/arch/arm64/include/uapi/asm/sve_context.h
-@@ -0,0 +1,53 @@
-+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-+/* Copyright (C) 2017-2018 ARM Limited */
-+
-+/*
-+ * For use by other UAPI headers only.
-+ * Do not make direct use of header or its definitions.
-+ */
-+
-+#ifndef _UAPI__ASM_SVE_CONTEXT_H
-+#define _UAPI__ASM_SVE_CONTEXT_H
-+
-+#include <linux/types.h>
-+
-+#define __SVE_VQ_BYTES 16 /* number of bytes per quadword */
-+
-+#define __SVE_VQ_MIN 1
-+#define __SVE_VQ_MAX 512
-+
-+#define __SVE_VL_MIN (__SVE_VQ_MIN * __SVE_VQ_BYTES)
-+#define __SVE_VL_MAX (__SVE_VQ_MAX * __SVE_VQ_BYTES)
-+
-+#define __SVE_NUM_ZREGS 32
-+#define __SVE_NUM_PREGS 16
-+
-+#define __sve_vl_valid(vl) \
-+ ((vl) % __SVE_VQ_BYTES == 0 && \
-+ (vl) >= __SVE_VL_MIN && \
-+ (vl) <= __SVE_VL_MAX)
-+
-+#define __sve_vq_from_vl(vl) ((vl) / __SVE_VQ_BYTES)
-+#define __sve_vl_from_vq(vq) ((vq) * __SVE_VQ_BYTES)
-+
-+#define __SVE_ZREG_SIZE(vq) ((__u32)(vq) * __SVE_VQ_BYTES)
-+#define __SVE_PREG_SIZE(vq) ((__u32)(vq) * (__SVE_VQ_BYTES / 8))
-+#define __SVE_FFR_SIZE(vq) __SVE_PREG_SIZE(vq)
-+
-+#define __SVE_ZREGS_OFFSET 0
-+#define __SVE_ZREG_OFFSET(vq, n) \
-+ (__SVE_ZREGS_OFFSET + __SVE_ZREG_SIZE(vq) * (n))
-+#define __SVE_ZREGS_SIZE(vq) \
-+ (__SVE_ZREG_OFFSET(vq, __SVE_NUM_ZREGS) - __SVE_ZREGS_OFFSET)
-+
-+#define __SVE_PREGS_OFFSET(vq) \
-+ (__SVE_ZREGS_OFFSET + __SVE_ZREGS_SIZE(vq))
-+#define __SVE_PREG_OFFSET(vq, n) \
-+ (__SVE_PREGS_OFFSET(vq) + __SVE_PREG_SIZE(vq) * (n))
-+#define __SVE_PREGS_SIZE(vq) \
-+ (__SVE_PREG_OFFSET(vq, __SVE_NUM_PREGS) - __SVE_PREGS_OFFSET(vq))
-+
-+#define __SVE_FFR_OFFSET(vq) \
-+ (__SVE_PREGS_OFFSET(vq) + __SVE_PREGS_SIZE(vq))
-+
-+#endif /* ! _UAPI__ASM_SVE_CONTEXT_H */
+++ /dev/null
-From: Pablo Neira Ayuso <pablo@netfilter.org>
-Date: Thu, 25 Jan 2018 12:58:55 +0100
-Subject: [PATCH] netfilter: nft_flow_offload: handle netdevice events from
- nf_flow_table
-
-Move the code that deals with device events to the core.
-
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
-
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -535,5 +535,35 @@ void nf_flow_table_free(struct nf_flowta
- }
- EXPORT_SYMBOL_GPL(nf_flow_table_free);
-
-+static int nf_flow_table_netdev_event(struct notifier_block *this,
-+ unsigned long event, void *ptr)
-+{
-+ struct net_device *dev = netdev_notifier_info_to_dev(ptr);
-+
-+ if (event != NETDEV_DOWN)
-+ return NOTIFY_DONE;
-+
-+ nf_flow_table_cleanup(dev_net(dev), dev);
-+
-+ return NOTIFY_DONE;
-+}
-+
-+static struct notifier_block flow_offload_netdev_notifier = {
-+ .notifier_call = nf_flow_table_netdev_event,
-+};
-+
-+static int __init nf_flow_table_module_init(void)
-+{
-+ return register_netdevice_notifier(&flow_offload_netdev_notifier);
-+}
-+
-+static void __exit nf_flow_table_module_exit(void)
-+{
-+ unregister_netdevice_notifier(&flow_offload_netdev_notifier);
-+}
-+
-+module_init(nf_flow_table_module_init);
-+module_exit(nf_flow_table_module_exit);
-+
- MODULE_LICENSE("GPL");
- MODULE_AUTHOR("Pablo Neira Ayuso <pablo@netfilter.org>");
---- a/net/netfilter/nft_flow_offload.c
-+++ b/net/netfilter/nft_flow_offload.c
-@@ -216,47 +216,14 @@ static struct nft_expr_type nft_flow_off
- .owner = THIS_MODULE,
- };
-
--static int flow_offload_netdev_event(struct notifier_block *this,
-- unsigned long event, void *ptr)
--{
-- struct net_device *dev = netdev_notifier_info_to_dev(ptr);
--
-- if (event != NETDEV_DOWN)
-- return NOTIFY_DONE;
--
-- nf_flow_table_cleanup(dev_net(dev), dev);
--
-- return NOTIFY_DONE;
--}
--
--static struct notifier_block flow_offload_netdev_notifier = {
-- .notifier_call = flow_offload_netdev_event,
--};
--
- static int __init nft_flow_offload_module_init(void)
- {
-- int err;
--
-- err = register_netdevice_notifier(&flow_offload_netdev_notifier);
-- if (err)
-- goto err;
--
-- err = nft_register_expr(&nft_flow_offload_type);
-- if (err < 0)
-- goto register_expr;
--
-- return 0;
--
--register_expr:
-- unregister_netdevice_notifier(&flow_offload_netdev_notifier);
--err:
-- return err;
-+ return nft_register_expr(&nft_flow_offload_type);
- }
-
- static void __exit nft_flow_offload_module_exit(void)
- {
- nft_unregister_expr(&nft_flow_offload_type);
-- unregister_netdevice_notifier(&flow_offload_netdev_notifier);
- }
-
- module_init(nft_flow_offload_module_init);
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Wed, 13 Jun 2018 12:33:39 +0200
-Subject: [PATCH] netfilter: nf_flow_table: fix offloaded connection timeout
- corner case
-
-The full teardown of offloaded flows is deferred to a gc work item,
-however processing of packets by netfilter needs to happen immediately
-after a teardown is requested, because the conntrack state needs to be
-fixed up.
-
-Since the IPS_OFFLOAD_BIT is still kept until the teardown is complete,
-the netfilter conntrack gc can accidentally bump the timeout of a
-connection where offload was just stopped, causing a conntrack entry
-leak.
-
-Fix this by moving the conntrack timeout bumping from conntrack core to
-the nf_flow_offload and add a check to prevent bogus timeout bumps.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/netfilter/nf_conntrack_core.c
-+++ b/net/netfilter/nf_conntrack_core.c
-@@ -1178,18 +1178,6 @@ static bool gc_worker_can_early_drop(con
- return false;
- }
-
--#define DAY (86400 * HZ)
--
--/* Set an arbitrary timeout large enough not to ever expire, this save
-- * us a check for the IPS_OFFLOAD_BIT from the packet path via
-- * nf_ct_is_expired().
-- */
--static void nf_ct_offload_timeout(struct nf_conn *ct)
--{
-- if (nf_ct_expires(ct) < DAY / 2)
-- ct->timeout = nfct_time_stamp + DAY;
--}
--
- static void gc_worker(struct work_struct *work)
- {
- unsigned int min_interval = max(HZ / GC_MAX_BUCKETS_DIV, 1u);
-@@ -1226,10 +1214,8 @@ static void gc_worker(struct work_struct
- tmp = nf_ct_tuplehash_to_ctrack(h);
-
- scanned++;
-- if (test_bit(IPS_OFFLOAD_BIT, &tmp->status)) {
-- nf_ct_offload_timeout(tmp);
-+ if (test_bit(IPS_OFFLOAD_BIT, &tmp->status))
- continue;
-- }
-
- if (nf_ct_is_expired(tmp)) {
- nf_ct_gc_expired(tmp);
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -183,10 +183,29 @@ static const struct rhashtable_params nf
- .automatic_shrinking = true,
- };
-
-+#define DAY (86400 * HZ)
-+
-+/* Set an arbitrary timeout large enough not to ever expire, this save
-+ * us a check for the IPS_OFFLOAD_BIT from the packet path via
-+ * nf_ct_is_expired().
-+ */
-+static void nf_ct_offload_timeout(struct flow_offload *flow)
-+{
-+ struct flow_offload_entry *entry;
-+ struct nf_conn *ct;
-+
-+ entry = container_of(flow, struct flow_offload_entry, flow);
-+ ct = entry->ct;
-+
-+ if (nf_ct_expires(ct) < DAY / 2)
-+ ct->timeout = nfct_time_stamp + DAY;
-+}
-+
- int flow_offload_add(struct nf_flowtable *flow_table, struct flow_offload *flow)
- {
- int err;
-
-+ nf_ct_offload_timeout(flow);
- flow->timeout = (u32)jiffies + NF_FLOW_TIMEOUT;
-
- err = rhashtable_insert_fast(&flow_table->rhashtable,
-@@ -317,6 +336,8 @@ static int nf_flow_offload_gc_step(struc
- rhashtable_walk_start(&hti);
-
- while ((tuplehash = rhashtable_walk_next(&hti))) {
-+ bool teardown;
-+
- if (IS_ERR(tuplehash)) {
- err = PTR_ERR(tuplehash);
- if (err != -EAGAIN)
-@@ -329,9 +350,13 @@ static int nf_flow_offload_gc_step(struc
-
- flow = container_of(tuplehash, struct flow_offload, tuplehash[0]);
-
-- if (nf_flow_has_expired(flow) ||
-- (flow->flags & (FLOW_OFFLOAD_DYING |
-- FLOW_OFFLOAD_TEARDOWN)))
-+ teardown = flow->flags & (FLOW_OFFLOAD_DYING |
-+ FLOW_OFFLOAD_TEARDOWN);
-+
-+ if (!teardown)
-+ nf_ct_offload_timeout(flow);
-+
-+ if (nf_flow_has_expired(flow) || teardown)
- flow_offload_del(flow_table, flow);
- }
- out:
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 14 Jun 2018 11:20:09 +0200
-Subject: [PATCH] netfilter: nf_flow_table: fix up ct state of flows after
- timeout
-
-If a connection simply times out instead of being torn down, it is left
-active with a long timeout. Fix this by calling flow_offload_fixup_ct_state
-here as well.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -243,6 +243,9 @@ static void flow_offload_del(struct nf_f
- e = container_of(flow, struct flow_offload_entry, flow);
- clear_bit(IPS_OFFLOAD_BIT, &e->ct->status);
-
-+ if (!(flow->flags & FLOW_OFFLOAD_TEARDOWN))
-+ flow_offload_fixup_ct_state(e->ct);
-+
- flow_offload_free(flow);
- }
-
+++ /dev/null
-From d129a72f465dab2d9fc8f1580c38600a8b808327 Mon Sep 17 00:00:00 2001
-From: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
-Date: Wed, 13 Mar 2019 20:54:49 +0000
-Subject: [PATCH] net: sched: Backport Introduce act_ctinfo action
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-ctinfo is a new tc filter action module. It is designed to restore
-information contained in firewall conntrack marks to other packet fields
-and is typically used on packet ingress paths. At present it has two
-independent sub-functions or operating modes, DSCP restoration mode &
-skb mark restoration mode.
-
-The DSCP restore mode:
-
-This mode copies DSCP values that have been placed in the firewall
-conntrack mark back into the IPv4/v6 diffserv fields of relevant
-packets.
-
-The DSCP restoration is intended for use and has been found useful for
-restoring ingress classifications based on egress classifications across
-links that bleach or otherwise change DSCP, typically home ISP Internet
-links. Restoring DSCP on ingress on the WAN link allows qdiscs such as
-but by no means limited to CAKE to shape inbound packets according to
-policies that are easier to set & mark on egress.
-
-Ingress classification is traditionally a challenging task since
-iptables rules haven't yet run and tc filter/eBPF programs are pre-NAT
-lookups, hence are unable to see internal IPv4 addresses as used on the
-typical home masquerading gateway. Thus marking the connection in some
-manner on egress for later restoration of classification on ingress is
-easier to implement.
-
-Parameters related to DSCP restore mode:
-
-dscpmask - a 32 bit mask of 6 contiguous bits and indicate bits of the
-conntrack mark field contain the DSCP value to be restored.
-
-statemask - a 32 bit mask of (usually) 1 bit length, outside the area
-specified by dscpmask. This represents a conditional operation flag
-whereby the DSCP is only restored if the flag is set. This is useful to
-implement a 'one shot' iptables based classification where the
-'complicated' iptables rules are only run once to classify the
-connection on initial (egress) packet and subsequent packets are all
-marked/restored with the same DSCP. A mask of zero disables the
-conditional behaviour ie. the conntrack mark DSCP bits are always
-restored to the ip diffserv field (assuming the conntrack entry is found
-& the skb is an ipv4/ipv6 type)
-
-e.g. dscpmask 0xfc000000 statemask 0x01000000
-
-|----0xFC----conntrack mark----000000---|
-| Bits 31-26 | bit 25 | bit24 |~~~ Bit 0|
-| DSCP | unused | flag |unused |
-|-----------------------0x01---000000---|
- | |
- | |
- ---| Conditional flag
- v only restore if set
-|-ip diffserv-|
-| 6 bits |
-|-------------|
-
-The skb mark restore mode (cpmark):
-
-This mode copies the firewall conntrack mark to the skb's mark field.
-It is completely the functional equivalent of the existing act_connmark
-action with the additional feature of being able to apply a mask to the
-restored value.
-
-Parameters related to skb mark restore mode:
-
-mask - a 32 bit mask applied to the firewall conntrack mark to mask out
-bits unwanted for restoration. This can be useful where the conntrack
-mark is being used for different purposes by different applications. If
-not specified and by default the whole mark field is copied (i.e.
-default mask of 0xffffffff)
-
-e.g. mask 0x00ffffff to mask out the top 8 bits being used by the
-aforementioned DSCP restore mode.
-
-|----0x00----conntrack mark----ffffff---|
-| Bits 31-24 | |
-| DSCP & flag| some value here |
-|---------------------------------------|
- |
- |
- v
-|------------skb mark-------------------|
-| | |
-| zeroed | |
-|---------------------------------------|
-
-Overall parameters:
-
-zone - conntrack zone
-
-control - action related control (reclassify | pipe | drop | continue |
-ok | goto chain <CHAIN_INDEX>)
-
-Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
-Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
-Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-
-Backport
-Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
----
- include/net/tc_act/tc_ctinfo.h | 33 ++
- include/uapi/linux/pkt_cls.h | 3 +-
- include/uapi/linux/tc_act/tc_ctinfo.h | 29 ++
- net/sched/Kconfig | 17 +
- net/sched/Makefile | 1 +
- net/sched/act_ctinfo.c | 420 ++++++++++++++++++++++
- tools/testing/selftests/tc-testing/config | 1 +
- 7 files changed, 503 insertions(+), 1 deletion(-)
- create mode 100644 include/net/tc_act/tc_ctinfo.h
- create mode 100644 include/uapi/linux/tc_act/tc_ctinfo.h
- create mode 100644 net/sched/act_ctinfo.c
-
---- /dev/null
-+++ b/include/net/tc_act/tc_ctinfo.h
-@@ -0,0 +1,33 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+#ifndef __NET_TC_CTINFO_H
-+#define __NET_TC_CTINFO_H
-+
-+#include <net/act_api.h>
-+
-+struct tcf_ctinfo_params {
-+ struct rcu_head rcu;
-+ struct net *net;
-+ u32 dscpmask;
-+ u32 dscpstatemask;
-+ u32 cpmarkmask;
-+ u16 zone;
-+ u8 mode;
-+ u8 dscpmaskshift;
-+};
-+
-+struct tcf_ctinfo {
-+ struct tc_action common;
-+ struct tcf_ctinfo_params __rcu *params;
-+ u64 stats_dscp_set;
-+ u64 stats_dscp_error;
-+ u64 stats_cpmark_set;
-+};
-+
-+enum {
-+ CTINFO_MODE_DSCP = BIT(0),
-+ CTINFO_MODE_CPMARK = BIT(1)
-+};
-+
-+#define to_ctinfo(a) ((struct tcf_ctinfo *)a)
-+
-+#endif /* __NET_TC_CTINFO_H */
---- a/include/uapi/linux/pkt_cls.h
-+++ b/include/uapi/linux/pkt_cls.h
-@@ -68,7 +68,8 @@ enum {
- TCA_ID_UNSPEC=0,
- TCA_ID_POLICE=1,
- /* other actions go here */
-- __TCA_ID_MAX=255
-+ TCA_ID_CTINFO,
-+ __TCA_ID_MAX = 255
- };
-
- #define TCA_ID_MAX __TCA_ID_MAX
---- /dev/null
-+++ b/include/uapi/linux/tc_act/tc_ctinfo.h
-@@ -0,0 +1,29 @@
-+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-+#ifndef __UAPI_TC_CTINFO_H
-+#define __UAPI_TC_CTINFO_H
-+
-+#include <linux/types.h>
-+#include <linux/pkt_cls.h>
-+
-+struct tc_ctinfo {
-+ tc_gen;
-+};
-+
-+enum {
-+ TCA_CTINFO_UNSPEC,
-+ TCA_CTINFO_PAD,
-+ TCA_CTINFO_TM,
-+ TCA_CTINFO_ACT,
-+ TCA_CTINFO_ZONE,
-+ TCA_CTINFO_PARMS_DSCP_MASK,
-+ TCA_CTINFO_PARMS_DSCP_STATEMASK,
-+ TCA_CTINFO_PARMS_CPMARK_MASK,
-+ TCA_CTINFO_STATS_DSCP_SET,
-+ TCA_CTINFO_STATS_DSCP_ERROR,
-+ TCA_CTINFO_STATS_CPMARK_SET,
-+ __TCA_CTINFO_MAX
-+};
-+
-+#define TCA_CTINFO_MAX (__TCA_CTINFO_MAX - 1)
-+
-+#endif
---- a/net/sched/Kconfig
-+++ b/net/sched/Kconfig
-@@ -866,6 +866,23 @@ config NET_ACT_CONNMARK
- To compile this code as a module, choose M here: the
- module will be called act_connmark.
-
-+config NET_ACT_CTINFO
-+ tristate "Netfilter Connection Mark Actions"
-+ depends on NET_CLS_ACT && NETFILTER && IP_NF_IPTABLES
-+ depends on NF_CONNTRACK && NF_CONNTRACK_MARK
-+ help
-+ Say Y here to allow transfer of a connmark stored information.
-+ Current actions transfer connmark stored DSCP into
-+ ipv4/v6 diffserv and/or to transfer connmark to packet
-+ mark. Both are useful for restoring egress based marks
-+ back onto ingress connections for qdisc priority mapping
-+ purposes.
-+
-+ If unsure, say N.
-+
-+ To compile this code as a module, choose M here: the
-+ module will be called act_ctinfo.
-+
- config NET_ACT_SKBMOD
- tristate "skb data modification action"
- depends on NET_CLS_ACT
---- a/net/sched/Makefile
-+++ b/net/sched/Makefile
-@@ -21,6 +21,7 @@ obj-$(CONFIG_NET_ACT_CSUM) += act_csum.o
- obj-$(CONFIG_NET_ACT_VLAN) += act_vlan.o
- obj-$(CONFIG_NET_ACT_BPF) += act_bpf.o
- obj-$(CONFIG_NET_ACT_CONNMARK) += act_connmark.o
-+obj-$(CONFIG_NET_ACT_CTINFO) += act_ctinfo.o
- obj-$(CONFIG_NET_ACT_SKBMOD) += act_skbmod.o
- obj-$(CONFIG_NET_ACT_IFE) += act_ife.o
- obj-$(CONFIG_NET_IFE_SKBMARK) += act_meta_mark.o
---- /dev/null
-+++ b/net/sched/act_ctinfo.c
-@@ -0,0 +1,420 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+/* net/sched/act_ctinfo.c netfilter ctinfo connmark actions
-+ *
-+ * Copyright (c) 2019 Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/skbuff.h>
-+#include <linux/rtnetlink.h>
-+#include <linux/pkt_cls.h>
-+#include <linux/ip.h>
-+#include <linux/ipv6.h>
-+#include <net/netlink.h>
-+#include <net/pkt_sched.h>
-+#include <net/act_api.h>
-+#include <net/pkt_cls.h>
-+#include <uapi/linux/tc_act/tc_ctinfo.h>
-+#include <net/tc_act/tc_ctinfo.h>
-+
-+#include <net/netfilter/nf_conntrack.h>
-+#include <net/netfilter/nf_conntrack_core.h>
-+#include <net/netfilter/nf_conntrack_ecache.h>
-+#include <net/netfilter/nf_conntrack_zones.h>
-+
-+static struct tc_action_ops act_ctinfo_ops;
-+static unsigned int ctinfo_net_id;
-+
-+static void tcf_ctinfo_dscp_set(struct nf_conn *ct, struct tcf_ctinfo *ca,
-+ struct tcf_ctinfo_params *cp,
-+ struct sk_buff *skb, int wlen, int proto)
-+{
-+ u8 dscp, newdscp;
-+
-+ newdscp = (((ct->mark & cp->dscpmask) >> cp->dscpmaskshift) << 2) &
-+ ~INET_ECN_MASK;
-+
-+ switch (proto) {
-+ case NFPROTO_IPV4:
-+ dscp = ipv4_get_dsfield(ip_hdr(skb)) & ~INET_ECN_MASK;
-+ if (dscp != newdscp) {
-+ if (likely(!skb_try_make_writable(skb, wlen))) {
-+ ipv4_change_dsfield(ip_hdr(skb),
-+ INET_ECN_MASK,
-+ newdscp);
-+ ca->stats_dscp_set++;
-+ } else {
-+ ca->stats_dscp_error++;
-+ }
-+ }
-+ break;
-+ case NFPROTO_IPV6:
-+ dscp = ipv6_get_dsfield(ipv6_hdr(skb)) & ~INET_ECN_MASK;
-+ if (dscp != newdscp) {
-+ if (likely(!skb_try_make_writable(skb, wlen))) {
-+ ipv6_change_dsfield(ipv6_hdr(skb),
-+ INET_ECN_MASK,
-+ newdscp);
-+ ca->stats_dscp_set++;
-+ } else {
-+ ca->stats_dscp_error++;
-+ }
-+ }
-+ break;
-+ default:
-+ break;
-+ }
-+}
-+
-+static void tcf_ctinfo_cpmark_set(struct nf_conn *ct, struct tcf_ctinfo *ca,
-+ struct tcf_ctinfo_params *cp,
-+ struct sk_buff *skb)
-+{
-+ ca->stats_cpmark_set++;
-+ skb->mark = ct->mark & cp->cpmarkmask;
-+}
-+
-+static int tcf_ctinfo_act(struct sk_buff *skb, const struct tc_action *a,
-+ struct tcf_result *res)
-+{
-+ const struct nf_conntrack_tuple_hash *thash = NULL;
-+ struct tcf_ctinfo *ca = to_ctinfo(a);
-+ struct nf_conntrack_tuple tuple;
-+ struct nf_conntrack_zone zone;
-+ enum ip_conntrack_info ctinfo;
-+ struct tcf_ctinfo_params *cp;
-+ struct nf_conn *ct;
-+ int proto, wlen;
-+ int action;
-+
-+ cp = rcu_dereference_bh(ca->params);
-+
-+ tcf_lastuse_update(&ca->tcf_tm);
-+ bstats_update(&ca->tcf_bstats, skb);
-+ action = READ_ONCE(ca->tcf_action);
-+
-+ wlen = skb_network_offset(skb);
-+ if (skb_protocol(skb, true) == htons(ETH_P_IP)) {
-+ wlen += sizeof(struct iphdr);
-+ if (!pskb_may_pull(skb, wlen))
-+ goto out;
-+
-+ proto = NFPROTO_IPV4;
-+ } else if (skb_protocol(skb, true) == htons(ETH_P_IPV6)) {
-+ wlen += sizeof(struct ipv6hdr);
-+ if (!pskb_may_pull(skb, wlen))
-+ goto out;
-+
-+ proto = NFPROTO_IPV6;
-+ } else {
-+ goto out;
-+ }
-+
-+ ct = nf_ct_get(skb, &ctinfo);
-+ if (!ct) { /* look harder, usually ingress */
-+ if (!nf_ct_get_tuplepr(skb, skb_network_offset(skb),
-+ proto, cp->net, &tuple))
-+ goto out;
-+ zone.id = cp->zone;
-+ zone.dir = NF_CT_DEFAULT_ZONE_DIR;
-+
-+ thash = nf_conntrack_find_get(cp->net, &zone, &tuple);
-+ if (!thash)
-+ goto out;
-+
-+ ct = nf_ct_tuplehash_to_ctrack(thash);
-+ }
-+
-+ if (cp->mode & CTINFO_MODE_DSCP)
-+ if (!cp->dscpstatemask || (ct->mark & cp->dscpstatemask))
-+ tcf_ctinfo_dscp_set(ct, ca, cp, skb, wlen, proto);
-+
-+ if (cp->mode & CTINFO_MODE_CPMARK)
-+ tcf_ctinfo_cpmark_set(ct, ca, cp, skb);
-+
-+ if (thash)
-+ nf_ct_put(ct);
-+out:
-+ return action;
-+}
-+
-+static const struct nla_policy ctinfo_policy[TCA_CTINFO_MAX + 1] = {
-+ [TCA_CTINFO_ACT] = { .len = sizeof(struct
-+ tc_ctinfo) },
-+ [TCA_CTINFO_ZONE] = { .type = NLA_U16 },
-+ [TCA_CTINFO_PARMS_DSCP_MASK] = { .type = NLA_U32 },
-+ [TCA_CTINFO_PARMS_DSCP_STATEMASK] = { .type = NLA_U32 },
-+ [TCA_CTINFO_PARMS_CPMARK_MASK] = { .type = NLA_U32 },
-+};
-+
-+static int tcf_ctinfo_init(struct net *net, struct nlattr *nla,
-+ struct nlattr *est, struct tc_action **a,
-+ int ovr, int bind, bool rtnl_held,
-+ struct netlink_ext_ack *extack)
-+{
-+ struct tc_action_net *tn = net_generic(net, ctinfo_net_id);
-+ u32 dscpmask = 0, dscpstatemask, index;
-+ struct nlattr *tb[TCA_CTINFO_MAX + 1];
-+ struct tcf_ctinfo_params *cp_new;
-+/* struct tcf_chain *goto_ch = NULL; */
-+ struct tc_ctinfo *actparm;
-+ struct tcf_ctinfo *ci;
-+ u8 dscpmaskshift;
-+ int ret = 0, err;
-+
-+ if (!nla) {
-+ NL_SET_ERR_MSG_MOD(extack, "ctinfo requires attributes to be passed");
-+ return -EINVAL;
-+ }
-+
-+ err = nla_parse_nested(tb, TCA_CTINFO_MAX, nla, ctinfo_policy, extack);
-+ if (err < 0)
-+ return err;
-+
-+ if (!tb[TCA_CTINFO_ACT]) {
-+ NL_SET_ERR_MSG_MOD(extack,
-+ "Missing required TCA_CTINFO_ACT attribute");
-+ return -EINVAL;
-+ }
-+ actparm = nla_data(tb[TCA_CTINFO_ACT]);
-+
-+ /* do some basic validation here before dynamically allocating things */
-+ /* that we would otherwise have to clean up. */
-+ if (tb[TCA_CTINFO_PARMS_DSCP_MASK]) {
-+ dscpmask = nla_get_u32(tb[TCA_CTINFO_PARMS_DSCP_MASK]);
-+ /* need contiguous 6 bit mask */
-+ dscpmaskshift = dscpmask ? __ffs(dscpmask) : 0;
-+ if ((~0 & (dscpmask >> dscpmaskshift)) != 0x3f) {
-+ NL_SET_ERR_MSG_ATTR(extack,
-+ tb[TCA_CTINFO_PARMS_DSCP_MASK],
-+ "dscp mask must be 6 contiguous bits");
-+ return -EINVAL;
-+ }
-+ dscpstatemask = tb[TCA_CTINFO_PARMS_DSCP_STATEMASK] ?
-+ nla_get_u32(tb[TCA_CTINFO_PARMS_DSCP_STATEMASK]) : 0;
-+ /* mask & statemask must not overlap */
-+ if (dscpmask & dscpstatemask) {
-+ NL_SET_ERR_MSG_ATTR(extack,
-+ tb[TCA_CTINFO_PARMS_DSCP_STATEMASK],
-+ "dscp statemask must not overlap dscp mask");
-+ return -EINVAL;
-+ }
-+ }
-+
-+ /* done the validation:now to the actual action allocation */
-+ index = actparm->index;
-+ err = tcf_idr_check_alloc(tn, &index, a, bind);
-+ if (!err) {
-+ ret = tcf_idr_create(tn, index, est, a,
-+ &act_ctinfo_ops, bind, false);
-+ if (ret) {
-+ tcf_idr_cleanup(tn, index);
-+ return ret;
-+ }
-+ ret = ACT_P_CREATED;
-+ } else if (err > 0) {
-+ if (bind) /* don't override defaults */
-+ return 0;
-+ if (!ovr) {
-+ tcf_idr_release(*a, bind);
-+ return -EEXIST;
-+ }
-+ } else {
-+ return err;
-+ }
-+
-+/* err = tcf_action_check_ctrlact(actparm->action, tp, &goto_ch, extack);
-+ if (err < 0)
-+ goto release_idr;
-+ */
-+
-+ ci = to_ctinfo(*a);
-+
-+ cp_new = kzalloc(sizeof(*cp_new), GFP_KERNEL);
-+ if (unlikely(!cp_new)) {
-+ err = -ENOMEM;
-+ goto put_chain;
-+ }
-+
-+ cp_new->net = net;
-+ cp_new->zone = tb[TCA_CTINFO_ZONE] ?
-+ nla_get_u16(tb[TCA_CTINFO_ZONE]) : 0;
-+ if (dscpmask) {
-+ cp_new->dscpmask = dscpmask;
-+ cp_new->dscpmaskshift = dscpmaskshift;
-+ cp_new->dscpstatemask = dscpstatemask;
-+ cp_new->mode |= CTINFO_MODE_DSCP;
-+ }
-+
-+ if (tb[TCA_CTINFO_PARMS_CPMARK_MASK]) {
-+ cp_new->cpmarkmask =
-+ nla_get_u32(tb[TCA_CTINFO_PARMS_CPMARK_MASK]);
-+ cp_new->mode |= CTINFO_MODE_CPMARK;
-+ }
-+
-+ spin_lock_bh(&ci->tcf_lock);
-+/* goto_ch = tcf_action_set_ctrlact(*a, actparm->action, goto_ch); */
-+ ci->tcf_action = actparm->action;
-+ rcu_swap_protected(ci->params, cp_new,
-+ lockdep_is_held(&ci->tcf_lock));
-+ spin_unlock_bh(&ci->tcf_lock);
-+
-+/* if (goto_ch)
-+ tcf_chain_put_by_act(goto_ch); */
-+ if (cp_new)
-+ kfree_rcu(cp_new, rcu);
-+
-+ if (ret == ACT_P_CREATED)
-+ tcf_idr_insert(tn, *a);
-+
-+ return ret;
-+
-+put_chain:
-+/* if (goto_ch)
-+ tcf_chain_put_by_act(goto_ch);
-+release_idr: */
-+ tcf_idr_release(*a, bind);
-+ return err;
-+}
-+
-+static int tcf_ctinfo_dump(struct sk_buff *skb, struct tc_action *a,
-+ int bind, int ref)
-+{
-+ struct tcf_ctinfo *ci = to_ctinfo(a);
-+ struct tc_ctinfo opt = {
-+ .index = ci->tcf_index,
-+ .refcnt = refcount_read(&ci->tcf_refcnt) - ref,
-+ .bindcnt = atomic_read(&ci->tcf_bindcnt) - bind,
-+ };
-+ unsigned char *b = skb_tail_pointer(skb);
-+ struct tcf_ctinfo_params *cp;
-+ struct tcf_t t;
-+
-+ spin_lock_bh(&ci->tcf_lock);
-+ cp = rcu_dereference_protected(ci->params,
-+ lockdep_is_held(&ci->tcf_lock));
-+
-+ tcf_tm_dump(&t, &ci->tcf_tm);
-+ if (nla_put_64bit(skb, TCA_CTINFO_TM, sizeof(t), &t, TCA_CTINFO_PAD))
-+ goto nla_put_failure;
-+
-+ opt.action = ci->tcf_action;
-+ if (nla_put(skb, TCA_CTINFO_ACT, sizeof(opt), &opt))
-+ goto nla_put_failure;
-+
-+ if (nla_put_u16(skb, TCA_CTINFO_ZONE, cp->zone))
-+ goto nla_put_failure;
-+
-+ if (cp->mode & CTINFO_MODE_DSCP) {
-+ if (nla_put_u32(skb, TCA_CTINFO_PARMS_DSCP_MASK,
-+ cp->dscpmask))
-+ goto nla_put_failure;
-+ if (nla_put_u32(skb, TCA_CTINFO_PARMS_DSCP_STATEMASK,
-+ cp->dscpstatemask))
-+ goto nla_put_failure;
-+ }
-+
-+ if (cp->mode & CTINFO_MODE_CPMARK) {
-+ if (nla_put_u32(skb, TCA_CTINFO_PARMS_CPMARK_MASK,
-+ cp->cpmarkmask))
-+ goto nla_put_failure;
-+ }
-+
-+ if (nla_put_u64_64bit(skb, TCA_CTINFO_STATS_DSCP_SET,
-+ ci->stats_dscp_set, TCA_CTINFO_PAD))
-+ goto nla_put_failure;
-+
-+ if (nla_put_u64_64bit(skb, TCA_CTINFO_STATS_DSCP_ERROR,
-+ ci->stats_dscp_error, TCA_CTINFO_PAD))
-+ goto nla_put_failure;
-+
-+ if (nla_put_u64_64bit(skb, TCA_CTINFO_STATS_CPMARK_SET,
-+ ci->stats_cpmark_set, TCA_CTINFO_PAD))
-+ goto nla_put_failure;
-+
-+ spin_unlock_bh(&ci->tcf_lock);
-+ return skb->len;
-+
-+nla_put_failure:
-+ spin_unlock_bh(&ci->tcf_lock);
-+ nlmsg_trim(skb, b);
-+ return -1;
-+}
-+
-+static int tcf_ctinfo_walker(struct net *net, struct sk_buff *skb,
-+ struct netlink_callback *cb, int type,
-+ const struct tc_action_ops *ops,
-+ struct netlink_ext_ack *extack)
-+{
-+ struct tc_action_net *tn = net_generic(net, ctinfo_net_id);
-+
-+ return tcf_generic_walker(tn, skb, cb, type, ops, extack);
-+}
-+
-+static int tcf_ctinfo_search(struct net *net, struct tc_action **a, u32 index,
-+ struct netlink_ext_ack *extack)
-+{
-+ struct tc_action_net *tn = net_generic(net, ctinfo_net_id);
-+
-+ return tcf_idr_search(tn, a, index);
-+}
-+
-+static void tcf_ctinfo_cleanup(struct tc_action *a)
-+{
-+ struct tcf_ctinfo *ci = to_ctinfo(a);
-+ struct tcf_ctinfo_params *cp;
-+
-+ cp = rcu_dereference_protected(ci->params, 1);
-+ if (cp)
-+ kfree_rcu(cp, rcu);
-+}
-+
-+static struct tc_action_ops act_ctinfo_ops = {
-+ .kind = "ctinfo",
-+ .type = TCA_ID_CTINFO,
-+ .owner = THIS_MODULE,
-+ .act = tcf_ctinfo_act,
-+ .dump = tcf_ctinfo_dump,
-+ .init = tcf_ctinfo_init,
-+ .walk = tcf_ctinfo_walker,
-+ .cleanup= tcf_ctinfo_cleanup,
-+ .lookup = tcf_ctinfo_search,
-+ .size = sizeof(struct tcf_ctinfo),
-+};
-+
-+static __net_init int ctinfo_init_net(struct net *net)
-+{
-+ struct tc_action_net *tn = net_generic(net, ctinfo_net_id);
-+
-+ return tc_action_net_init(net, tn, &act_ctinfo_ops);
-+}
-+
-+static void __net_exit ctinfo_exit_net(struct list_head *net_list)
-+{
-+ tc_action_net_exit(net_list, ctinfo_net_id);
-+}
-+
-+static struct pernet_operations ctinfo_net_ops = {
-+ .init = ctinfo_init_net,
-+ .exit_batch = ctinfo_exit_net,
-+ .id = &ctinfo_net_id,
-+ .size = sizeof(struct tc_action_net),
-+};
-+
-+static int __init ctinfo_init_module(void)
-+{
-+ return tcf_register_action(&act_ctinfo_ops, &ctinfo_net_ops);
-+}
-+
-+static void __exit ctinfo_cleanup_module(void)
-+{
-+ tcf_unregister_action(&act_ctinfo_ops, &ctinfo_net_ops);
-+}
-+
-+module_init(ctinfo_init_module);
-+module_exit(ctinfo_cleanup_module);
-+MODULE_AUTHOR("Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>");
-+MODULE_DESCRIPTION("Connection tracking mark actions");
-+MODULE_LICENSE("GPL");
---- a/tools/testing/selftests/tc-testing/config
-+++ b/tools/testing/selftests/tc-testing/config
-@@ -38,6 +38,7 @@ CONFIG_NET_ACT_CSUM=m
- CONFIG_NET_ACT_VLAN=m
- CONFIG_NET_ACT_BPF=m
- CONFIG_NET_ACT_CONNMARK=m
-+CONFIG_NET_ACT_CONNCTINFO=m
- CONFIG_NET_ACT_SKBMOD=m
- CONFIG_NET_ACT_IFE=m
- CONFIG_NET_ACT_TUNNEL_KEY=m
+++ /dev/null
-From 712639929912c5eefb09facccb48d55b3f72c9f8 Mon Sep 17 00:00:00 2001
-From: George Amanakis <gamanakis@gmail.com>
-Date: Fri, 1 Mar 2019 16:04:05 +0100
-Subject: [PATCH] sch_cake: Make the dual modes fairer
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-CAKE host fairness does not work well with TCP flows in dual-srchost and
-dual-dsthost setup. The reason is that ACKs generated by TCP flows are
-classified as sparse flows, and affect flow isolation from other hosts. Fix
-this by calculating host_load based only on the bulk flows a host
-generates. In a hash collision the host_bulk_flow_count values must be
-decremented on the old hosts and incremented on the new ones *if* the queue
-is in the bulk set.
-
-Reported-by: Pete Heist <peteheist@gmail.com>
-Signed-off-by: George Amanakis <gamanakis@gmail.com>
-Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
----
- net/sched/sch_cake.c | 92 ++++++++++++++++++++++++++++++--------------
- 1 file changed, 63 insertions(+), 29 deletions(-)
-
---- a/net/sched/sch_cake.c
-+++ b/net/sched/sch_cake.c
-@@ -138,8 +138,8 @@ struct cake_flow {
- struct cake_host {
- u32 srchost_tag;
- u32 dsthost_tag;
-- u16 srchost_refcnt;
-- u16 dsthost_refcnt;
-+ u16 srchost_bulk_flow_count;
-+ u16 dsthost_bulk_flow_count;
- };
-
- struct cake_heap_entry {
-@@ -746,8 +746,10 @@ skip_hash:
- * queue, accept the collision, update the host tags.
- */
- q->way_collisions++;
-- q->hosts[q->flows[reduced_hash].srchost].srchost_refcnt--;
-- q->hosts[q->flows[reduced_hash].dsthost].dsthost_refcnt--;
-+ if (q->flows[outer_hash + k].set == CAKE_SET_BULK) {
-+ q->hosts[q->flows[reduced_hash].srchost].srchost_bulk_flow_count--;
-+ q->hosts[q->flows[reduced_hash].dsthost].dsthost_bulk_flow_count--;
-+ }
- allocate_src = cake_dsrc(flow_mode);
- allocate_dst = cake_ddst(flow_mode);
- found:
-@@ -767,13 +769,14 @@ found:
- }
- for (i = 0; i < CAKE_SET_WAYS;
- i++, k = (k + 1) % CAKE_SET_WAYS) {
-- if (!q->hosts[outer_hash + k].srchost_refcnt)
-+ if (!q->hosts[outer_hash + k].srchost_bulk_flow_count)
- break;
- }
- q->hosts[outer_hash + k].srchost_tag = srchost_hash;
- found_src:
- srchost_idx = outer_hash + k;
-- q->hosts[srchost_idx].srchost_refcnt++;
-+ if (q->flows[reduced_hash].set == CAKE_SET_BULK)
-+ q->hosts[srchost_idx].srchost_bulk_flow_count++;
- q->flows[reduced_hash].srchost = srchost_idx;
- }
-
-@@ -789,13 +792,14 @@ found_src:
- }
- for (i = 0; i < CAKE_SET_WAYS;
- i++, k = (k + 1) % CAKE_SET_WAYS) {
-- if (!q->hosts[outer_hash + k].dsthost_refcnt)
-+ if (!q->hosts[outer_hash + k].dsthost_bulk_flow_count)
- break;
- }
- q->hosts[outer_hash + k].dsthost_tag = dsthost_hash;
- found_dst:
- dsthost_idx = outer_hash + k;
-- q->hosts[dsthost_idx].dsthost_refcnt++;
-+ if (q->flows[reduced_hash].set == CAKE_SET_BULK)
-+ q->hosts[dsthost_idx].dsthost_bulk_flow_count++;
- q->flows[reduced_hash].dsthost = dsthost_idx;
- }
- }
-@@ -1817,20 +1821,30 @@ static s32 cake_enqueue(struct sk_buff *
- b->sparse_flow_count++;
-
- if (cake_dsrc(q->flow_mode))
-- host_load = max(host_load, srchost->srchost_refcnt);
-+ host_load = max(host_load, srchost->srchost_bulk_flow_count);
-
- if (cake_ddst(q->flow_mode))
-- host_load = max(host_load, dsthost->dsthost_refcnt);
-+ host_load = max(host_load, dsthost->dsthost_bulk_flow_count);
-
- flow->deficit = (b->flow_quantum *
- quantum_div[host_load]) >> 16;
- } else if (flow->set == CAKE_SET_SPARSE_WAIT) {
-+ struct cake_host *srchost = &b->hosts[flow->srchost];
-+ struct cake_host *dsthost = &b->hosts[flow->dsthost];
-+
- /* this flow was empty, accounted as a sparse flow, but actually
- * in the bulk rotation.
- */
- flow->set = CAKE_SET_BULK;
- b->sparse_flow_count--;
- b->bulk_flow_count++;
-+
-+ if (cake_dsrc(q->flow_mode))
-+ srchost->srchost_bulk_flow_count++;
-+
-+ if (cake_ddst(q->flow_mode))
-+ dsthost->dsthost_bulk_flow_count++;
-+
- }
-
- if (q->buffer_used > q->buffer_max_used)
-@@ -1998,23 +2012,8 @@ retry:
- dsthost = &b->hosts[flow->dsthost];
- host_load = 1;
-
-- if (cake_dsrc(q->flow_mode))
-- host_load = max(host_load, srchost->srchost_refcnt);
--
-- if (cake_ddst(q->flow_mode))
-- host_load = max(host_load, dsthost->dsthost_refcnt);
--
-- WARN_ON(host_load > CAKE_QUEUES);
--
- /* flow isolation (DRR++) */
- if (flow->deficit <= 0) {
-- /* The shifted prandom_u32() is a way to apply dithering to
-- * avoid accumulating roundoff errors
-- */
-- flow->deficit += (b->flow_quantum * quantum_div[host_load] +
-- (prandom_u32() >> 16)) >> 16;
-- list_move_tail(&flow->flowchain, &b->old_flows);
--
- /* Keep all flows with deficits out of the sparse and decaying
- * rotations. No non-empty flow can go into the decaying
- * rotation, so they can't get deficits
-@@ -2023,6 +2022,13 @@ retry:
- if (flow->head) {
- b->sparse_flow_count--;
- b->bulk_flow_count++;
-+
-+ if (cake_dsrc(q->flow_mode))
-+ srchost->srchost_bulk_flow_count++;
-+
-+ if (cake_ddst(q->flow_mode))
-+ dsthost->dsthost_bulk_flow_count++;
-+
- flow->set = CAKE_SET_BULK;
- } else {
- /* we've moved it to the bulk rotation for
-@@ -2032,6 +2038,22 @@ retry:
- flow->set = CAKE_SET_SPARSE_WAIT;
- }
- }
-+
-+ if (cake_dsrc(q->flow_mode))
-+ host_load = max(host_load, srchost->srchost_bulk_flow_count);
-+
-+ if (cake_ddst(q->flow_mode))
-+ host_load = max(host_load, dsthost->dsthost_bulk_flow_count);
-+
-+ WARN_ON(host_load > CAKE_QUEUES);
-+
-+ /* The shifted prandom_u32() is a way to apply dithering to
-+ * avoid accumulating roundoff errors
-+ */
-+ flow->deficit += (b->flow_quantum * quantum_div[host_load] +
-+ (prandom_u32() >> 16)) >> 16;
-+ list_move_tail(&flow->flowchain, &b->old_flows);
-+
- goto retry;
- }
-
-@@ -2052,6 +2074,13 @@ retry:
- &b->decaying_flows);
- if (flow->set == CAKE_SET_BULK) {
- b->bulk_flow_count--;
-+
-+ if (cake_dsrc(q->flow_mode))
-+ srchost->srchost_bulk_flow_count--;
-+
-+ if (cake_ddst(q->flow_mode))
-+ dsthost->dsthost_bulk_flow_count--;
-+
- b->decaying_flow_count++;
- } else if (flow->set == CAKE_SET_SPARSE ||
- flow->set == CAKE_SET_SPARSE_WAIT) {
-@@ -2065,14 +2094,19 @@ retry:
- if (flow->set == CAKE_SET_SPARSE ||
- flow->set == CAKE_SET_SPARSE_WAIT)
- b->sparse_flow_count--;
-- else if (flow->set == CAKE_SET_BULK)
-+ else if (flow->set == CAKE_SET_BULK) {
- b->bulk_flow_count--;
-- else
-+
-+ if (cake_dsrc(q->flow_mode))
-+ srchost->srchost_bulk_flow_count--;
-+
-+ if (cake_ddst(q->flow_mode))
-+ dsthost->dsthost_bulk_flow_count--;
-+
-+ } else
- b->decaying_flow_count--;
-
- flow->set = CAKE_SET_NONE;
-- srchost->srchost_refcnt--;
-- dsthost->dsthost_refcnt--;
- }
- goto begin;
- }
+++ /dev/null
-From 0b5c7efdfc6e389ec6840579fe90bdb6f42b08dc Mon Sep 17 00:00:00 2001
-From: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
-Date: Fri, 1 Mar 2019 16:04:05 +0100
-Subject: [PATCH] sch_cake: Permit use of connmarks as tin classifiers
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Add flag 'FWMARK' to enable use of firewall connmarks as tin selector.
-The connmark (skbuff->mark) needs to be in the range 1->tin_cnt ie.
-for diffserv3 the mark needs to be 1->3.
-
-Background
-
-Typically CAKE uses DSCP as the basis for tin selection. DSCP values
-are relatively easily changed as part of the egress path, usually with
-iptables & the mangle table, ingress is more challenging. CAKE is often
-used on the WAN interface of a residential gateway where passthrough of
-DSCP from the ISP is either missing or set to unhelpful values thus use
-of ingress DSCP values for tin selection isn't helpful in that
-environment.
-
-An approach to solving the ingress tin selection problem is to use
-CAKE's understanding of tc filters. Naive tc filters could match on
-source/destination port numbers and force tin selection that way, but
-multiple filters don't scale particularly well as each filter must be
-traversed whether it matches or not. e.g. a simple example to map 3
-firewall marks to tins:
-
-MAJOR=$( tc qdisc show dev $DEV | head -1 | awk '{print $3}' )
-tc filter add dev $DEV parent $MAJOR protocol all handle 0x01 fw action skbedit priority ${MAJOR}1
-tc filter add dev $DEV parent $MAJOR protocol all handle 0x02 fw action skbedit priority ${MAJOR}2
-tc filter add dev $DEV parent $MAJOR protocol all handle 0x03 fw action skbedit priority ${MAJOR}3
-
-Another option is to use eBPF cls_act with tc filters e.g.
-
-MAJOR=$( tc qdisc show dev $DEV | head -1 | awk '{print $3}' )
-tc filter add dev $DEV parent $MAJOR bpf da obj my-bpf-fwmark-to-class.o
-
-This has the disadvantages of a) needing someone to write & maintain
-the bpf program, b) a bpf toolchain to compile it and c) needing to
-hardcode the major number in the bpf program so it matches the cake
-instance (or forcing the cake instance to a particular major number)
-since the major number cannot be passed to the bpf program via tc
-command line.
-
-As already hinted at by the previous examples, it would be helpful
-to associate tins with something that survives the Internet path and
-ideally allows tin selection on both egress and ingress. Netfilter's
-conntrack permits setting an identifying mark on a connection which
-can also be restored to an ingress packet with tc action connmark e.g.
-
-tc filter add dev eth0 parent ffff: protocol all prio 10 u32 \
- match u32 0 0 flowid 1:1 action connmark action mirred egress redirect dev ifb1
-
-Since tc's connmark action has restored any connmark into skb->mark,
-any of the previous solutions are based upon it and in one form or
-another copy that mark to the skb->priority field where again CAKE
-picks this up.
-
-This change cuts out at least one of the (less intuitive &
-non-scalable) middlemen and permit direct access to skb->mark.
-
-Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
-Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- include/uapi/linux/pkt_sched.h | 1 +
- net/sched/sch_cake.c | 34 +++++++++++++++++++++++++++-------
- 2 files changed, 28 insertions(+), 7 deletions(-)
-
---- a/include/uapi/linux/pkt_sched.h
-+++ b/include/uapi/linux/pkt_sched.h
-@@ -991,6 +991,7 @@ enum {
- TCA_CAKE_INGRESS,
- TCA_CAKE_ACK_FILTER,
- TCA_CAKE_SPLIT_GSO,
-+ TCA_CAKE_FWMARK,
- __TCA_CAKE_MAX
- };
- #define TCA_CAKE_MAX (__TCA_CAKE_MAX - 1)
---- a/net/sched/sch_cake.c
-+++ b/net/sched/sch_cake.c
-@@ -258,7 +258,8 @@ enum {
- CAKE_FLAG_AUTORATE_INGRESS = BIT(1),
- CAKE_FLAG_INGRESS = BIT(2),
- CAKE_FLAG_WASH = BIT(3),
-- CAKE_FLAG_SPLIT_GSO = BIT(4)
-+ CAKE_FLAG_SPLIT_GSO = BIT(4),
-+ CAKE_FLAG_FWMARK = BIT(5)
- };
-
- /* COBALT operates the Codel and BLUE algorithms in parallel, in order to
-@@ -2647,6 +2648,13 @@ static int cake_change(struct Qdisc *sch
- q->rate_flags &= ~CAKE_FLAG_SPLIT_GSO;
- }
-
-+ if (tb[TCA_CAKE_FWMARK]) {
-+ if (!!nla_get_u32(tb[TCA_CAKE_FWMARK]))
-+ q->rate_flags |= CAKE_FLAG_FWMARK;
-+ else
-+ q->rate_flags &= ~CAKE_FLAG_FWMARK;
-+ }
-+
- if (q->tins) {
- sch_tree_lock(sch);
- cake_reconfigure(sch);
-@@ -2806,6 +2814,10 @@ static int cake_dump(struct Qdisc *sch,
- !!(q->rate_flags & CAKE_FLAG_SPLIT_GSO)))
- goto nla_put_failure;
-
-+ if (nla_put_u32(skb, TCA_CAKE_FWMARK,
-+ !!(q->rate_flags & CAKE_FLAG_FWMARK)))
-+ goto nla_put_failure;
-+
- return nla_nest_end(skb, opts);
-
- nla_put_failure:
+++ /dev/null
-From eab2fc822af38f31fd5f4e731b5d10b94904d919 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Toke=20H=C3=B8iland-J=C3=B8rgensen?= <toke@redhat.com>
-Date: Thu, 14 Mar 2019 23:08:22 +0100
-Subject: [PATCH] sch_cake: Interpret fwmark parameter as a bitmask
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-We initially interpreted the fwmark parameter as a flag that simply turned
-on the feature, using the whole skb->mark field as the index into the CAKE
-tin_order array. However, it is quite common for different applications to
-use different parts of the mask field for their own purposes, each using a
-different mask.
-
-Support this use of subsets of the mark by interpreting the TCA_CAKE_FWMARK
-parameter as a bitmask to apply to the fwmark field when reading it. The
-result will be right-shifted by the number of unset lower bits of the mask
-before looking up the tin.
-
-In the original commit message we also failed to credit Felix Resch with
-originally suggesting the fwmark feature back in 2017; so the Suggested-By
-in this commit covers the whole fwmark feature.
-
-Fixes: 0b5c7efdfc6e ("sch_cake: Permit use of connmarks as tin classifiers")
-Suggested-by: Felix Resch <fuller@beif.de>
-Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
----
- net/sched/sch_cake.c | 25 ++++++++++++-------------
- 1 file changed, 12 insertions(+), 13 deletions(-)
-
---- a/net/sched/sch_cake.c
-+++ b/net/sched/sch_cake.c
-@@ -211,6 +211,9 @@ struct cake_sched_data {
- u8 ack_filter;
- u8 atm_mode;
-
-+ u32 fwmark_mask;
-+ u16 fwmark_shft;
-+
- /* time_next = time_this + ((len * rate_ns) >> rate_shft) */
- u16 rate_shft;
- ktime_t time_next_packet;
-@@ -258,8 +261,7 @@ enum {
- CAKE_FLAG_AUTORATE_INGRESS = BIT(1),
- CAKE_FLAG_INGRESS = BIT(2),
- CAKE_FLAG_WASH = BIT(3),
-- CAKE_FLAG_SPLIT_GSO = BIT(4),
-- CAKE_FLAG_FWMARK = BIT(5)
-+ CAKE_FLAG_SPLIT_GSO = BIT(4)
- };
-
- /* COBALT operates the Codel and BLUE algorithms in parallel, in order to
-@@ -1573,7 +1575,7 @@ static struct cake_tin_data *cake_select
- struct sk_buff *skb)
- {
- struct cake_sched_data *q = qdisc_priv(sch);
-- u32 tin;
-+ u32 tin, mark;
- bool wash;
- u8 dscp;
-
-@@ -1584,6 +1586,7 @@ static struct cake_tin_data *cake_select
- wash = !!(q->rate_flags & CAKE_FLAG_WASH);
- if (wash)
- dscp = cake_handle_diffserv(skb, wash);
-+ mark = (skb->mark & q->fwmark_mask) >> q->fwmark_shft;
-
- if (q->tin_mode == CAKE_DIFFSERV_BESTEFFORT)
- tin = 0;
-@@ -2202,6 +2205,7 @@ static const struct nla_policy cake_poli
- [TCA_CAKE_MPU] = { .type = NLA_U32 },
- [TCA_CAKE_INGRESS] = { .type = NLA_U32 },
- [TCA_CAKE_ACK_FILTER] = { .type = NLA_U32 },
-+ [TCA_CAKE_FWMARK] = { .type = NLA_U32 },
- };
-
- static void cake_set_rate(struct cake_tin_data *b, u64 rate, u32 mtu,
-@@ -2649,10 +2653,8 @@ static int cake_change(struct Qdisc *sch
- }
-
- if (tb[TCA_CAKE_FWMARK]) {
-- if (!!nla_get_u32(tb[TCA_CAKE_FWMARK]))
-- q->rate_flags |= CAKE_FLAG_FWMARK;
-- else
-- q->rate_flags &= ~CAKE_FLAG_FWMARK;
-+ q->fwmark_mask = nla_get_u32(tb[TCA_CAKE_FWMARK]);
-+ q->fwmark_shft = q->fwmark_mask ? __ffs(q->fwmark_mask) : 0;
- }
-
- if (q->tins) {
-@@ -2814,8 +2816,7 @@ static int cake_dump(struct Qdisc *sch,
- !!(q->rate_flags & CAKE_FLAG_SPLIT_GSO)))
- goto nla_put_failure;
-
-- if (nla_put_u32(skb, TCA_CAKE_FWMARK,
-- !!(q->rate_flags & CAKE_FLAG_FWMARK)))
-+ if (nla_put_u32(skb, TCA_CAKE_FWMARK, q->fwmark_mask))
- goto nla_put_failure;
-
- return nla_nest_end(skb, opts);
+++ /dev/null
-From d7e1738f0a0b0573ac93cf570ba3df9dee61b68e Mon Sep 17 00:00:00 2001
-From: Kevin 'ldir' Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
-Date: Wed, 18 Dec 2019 14:05:13 +0000
-Subject: [PATCH 2/2] sch_cake: drop unused variable tin_quantum_prio
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Turns out tin_quantum_prio isn't used anymore and is a leftover from a
-previous implementation of diffserv tins. Since the variable isn't used
-in any calculations it can be eliminated.
-
-Drop variable and places where it was set. Rename remaining variable
-and consolidate naming of intermediate variables that set it.
-
-Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
-Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- net/sched/sch_cake.c | 59 ++++++++++++++------------------------------
- 1 file changed, 18 insertions(+), 41 deletions(-)
-
---- a/net/sched/sch_cake.c
-+++ b/net/sched/sch_cake.c
-@@ -173,8 +173,7 @@ struct cake_tin_data {
- u64 tin_rate_bps;
- u16 tin_rate_shft;
-
-- u16 tin_quantum_prio;
-- u16 tin_quantum_band;
-+ u16 tin_quantum;
- s32 tin_deficit;
- u32 tin_backlog;
- u32 tin_dropped;
-@@ -1940,7 +1939,7 @@ begin:
- while (b->tin_deficit < 0 ||
- !(b->sparse_flow_count + b->bulk_flow_count)) {
- if (b->tin_deficit <= 0)
-- b->tin_deficit += b->tin_quantum_band;
-+ b->tin_deficit += b->tin_quantum;
- if (b->sparse_flow_count + b->bulk_flow_count)
- empty = false;
-
-@@ -2261,8 +2260,7 @@ static int cake_config_besteffort(struct
-
- cake_set_rate(b, rate, mtu,
- us_to_ns(q->target), us_to_ns(q->interval));
-- b->tin_quantum_band = 65535;
-- b->tin_quantum_prio = 65535;
-+ b->tin_quantum = 65535;
-
- return 0;
- }
-@@ -2273,8 +2271,7 @@ static int cake_config_precedence(struct
- struct cake_sched_data *q = qdisc_priv(sch);
- u32 mtu = psched_mtu(qdisc_dev(sch));
- u64 rate = q->rate_bps;
-- u32 quantum1 = 256;
-- u32 quantum2 = 256;
-+ u32 quantum = 256;
- u32 i;
-
- q->tin_cnt = 8;
-@@ -2287,18 +2284,14 @@ static int cake_config_precedence(struct
- cake_set_rate(b, rate, mtu, us_to_ns(q->target),
- us_to_ns(q->interval));
-
-- b->tin_quantum_prio = max_t(u16, 1U, quantum1);
-- b->tin_quantum_band = max_t(u16, 1U, quantum2);
-+ b->tin_quantum = max_t(u16, 1U, quantum);
-
- /* calculate next class's parameters */
- rate *= 7;
- rate >>= 3;
-
-- quantum1 *= 3;
-- quantum1 >>= 1;
--
-- quantum2 *= 7;
-- quantum2 >>= 3;
-+ quantum *= 7;
-+ quantum >>= 3;
- }
-
- return 0;
-@@ -2367,8 +2360,7 @@ static int cake_config_diffserv8(struct
- struct cake_sched_data *q = qdisc_priv(sch);
- u32 mtu = psched_mtu(qdisc_dev(sch));
- u64 rate = q->rate_bps;
-- u32 quantum1 = 256;
-- u32 quantum2 = 256;
-+ u32 quantum = 256;
- u32 i;
-
- q->tin_cnt = 8;
-@@ -2384,18 +2376,14 @@ static int cake_config_diffserv8(struct
- cake_set_rate(b, rate, mtu, us_to_ns(q->target),
- us_to_ns(q->interval));
-
-- b->tin_quantum_prio = max_t(u16, 1U, quantum1);
-- b->tin_quantum_band = max_t(u16, 1U, quantum2);
-+ b->tin_quantum = max_t(u16, 1U, quantum);
-
- /* calculate next class's parameters */
- rate *= 7;
- rate >>= 3;
-
-- quantum1 *= 3;
-- quantum1 >>= 1;
--
-- quantum2 *= 7;
-- quantum2 >>= 3;
-+ quantum *= 7;
-+ quantum >>= 3;
- }
-
- return 0;
-@@ -2434,17 +2422,11 @@ static int cake_config_diffserv4(struct
- cake_set_rate(&q->tins[3], rate >> 2, mtu,
- us_to_ns(q->target), us_to_ns(q->interval));
-
-- /* priority weights */
-- q->tins[0].tin_quantum_prio = quantum;
-- q->tins[1].tin_quantum_prio = quantum >> 4;
-- q->tins[2].tin_quantum_prio = quantum << 2;
-- q->tins[3].tin_quantum_prio = quantum << 4;
--
- /* bandwidth-sharing weights */
-- q->tins[0].tin_quantum_band = quantum;
-- q->tins[1].tin_quantum_band = quantum >> 4;
-- q->tins[2].tin_quantum_band = quantum >> 1;
-- q->tins[3].tin_quantum_band = quantum >> 2;
-+ q->tins[0].tin_quantum = quantum;
-+ q->tins[1].tin_quantum = quantum >> 4;
-+ q->tins[2].tin_quantum = quantum >> 1;
-+ q->tins[3].tin_quantum = quantum >> 2;
-
- return 0;
- }
-@@ -2475,15 +2457,10 @@ static int cake_config_diffserv3(struct
- cake_set_rate(&q->tins[2], rate >> 2, mtu,
- us_to_ns(q->target), us_to_ns(q->interval));
-
-- /* priority weights */
-- q->tins[0].tin_quantum_prio = quantum;
-- q->tins[1].tin_quantum_prio = quantum >> 4;
-- q->tins[2].tin_quantum_prio = quantum << 4;
--
- /* bandwidth-sharing weights */
-- q->tins[0].tin_quantum_band = quantum;
-- q->tins[1].tin_quantum_band = quantum >> 4;
-- q->tins[2].tin_quantum_band = quantum >> 2;
-+ q->tins[0].tin_quantum = quantum;
-+ q->tins[1].tin_quantum = quantum >> 4;
-+ q->tins[2].tin_quantum = quantum >> 2;
-
- return 0;
- }
+++ /dev/null
-From b3c424eb6a1a3c485de64619418a471dee6ce849 Mon Sep 17 00:00:00 2001
-From: Victorien Molle <victorien.molle@wifirst.fr>
-Date: Mon, 2 Dec 2019 15:11:38 +0100
-Subject: [PATCH] sch_cake: Add missing NLA policy entry TCA_CAKE_SPLIT_GSO
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This field has never been checked since introduction in mainline kernel
-
-Signed-off-by: Victorien Molle <victorien.molle@wifirst.fr>
-Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr>
-Fixes: 2db6dc2662ba "sch_cake: Make gso-splitting configurable from userspace"
-Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
----
- net/sched/sch_cake.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/net/sched/sch_cake.c
-+++ b/net/sched/sch_cake.c
-@@ -2204,6 +2204,7 @@ static const struct nla_policy cake_poli
- [TCA_CAKE_MPU] = { .type = NLA_U32 },
- [TCA_CAKE_INGRESS] = { .type = NLA_U32 },
- [TCA_CAKE_ACK_FILTER] = { .type = NLA_U32 },
-+ [TCA_CAKE_SPLIT_GSO] = { .type = NLA_U32 },
- [TCA_CAKE_FWMARK] = { .type = NLA_U32 },
- };
-
+++ /dev/null
-From b0c19ed6088ab41dd2a727b60594b7297c15d6ce Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Toke=20H=C3=B8iland-J=C3=B8rgensen?= <toke@redhat.com>
-Date: Fri, 29 May 2020 14:43:44 +0200
-Subject: [PATCH] sch_cake: Take advantage of skb->hash where appropriate
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-While the other fq-based qdiscs take advantage of skb->hash and doesn't
-recompute it if it is already set, sch_cake does not.
-
-This was a deliberate choice because sch_cake hashes various parts of the
-packet header to support its advanced flow isolation modes. However,
-foregoing the use of skb->hash entirely loses a few important benefits:
-
-- When skb->hash is set by hardware, a few CPU cycles can be saved by not
- hashing again in software.
-
-- Tunnel encapsulations will generally preserve the value of skb->hash from
- before the encapsulation, which allows flow-based qdiscs to distinguish
- between flows even though the outer packet header no longer has flow
- information.
-
-It turns out that we can preserve these desirable properties in many cases,
-while still supporting the advanced flow isolation properties of sch_cake.
-This patch does so by reusing the skb->hash value as the flow_hash part of
-the hashing procedure in cake_hash() only in the following conditions:
-
-- If the skb->hash is marked as covering the flow headers (skb->l4_hash is
- set)
-
-AND
-
-- NAT header rewriting is either disabled, or did not change any values
- used for hashing. The latter is important to match local-origin packets
- such as those of a tunnel endpoint.
-
-The immediate motivation for fixing this was the recent patch to WireGuard
-to preserve the skb->hash on encapsulation. As such, this is also what I
-tested against; with this patch, added latency under load for competing
-flows drops from ~8 ms to sub-1ms on an RRUL test over a WireGuard tunnel
-going through a virtual link shaped to 1Gbps using sch_cake. This matches
-the results we saw with a similar setup using sch_fq_codel when testing the
-WireGuard patch.
-
-Fixes: 046f6fd5daef ("sched: Add Common Applications Kept Enhanced (cake) qdisc")
-Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
----
- net/sched/sch_cake.c | 65 ++++++++++++++++++++++++++++++++++----------
- 1 file changed, 51 insertions(+), 14 deletions(-)
-
---- a/net/sched/sch_cake.c
-+++ b/net/sched/sch_cake.c
-@@ -584,26 +584,48 @@ static bool cobalt_should_drop(struct co
- return drop;
- }
-
--static void cake_update_flowkeys(struct flow_keys *keys,
-+static bool cake_update_flowkeys(struct flow_keys *keys,
- const struct sk_buff *skb)
- {
- #if IS_ENABLED(CONFIG_NF_CONNTRACK)
- struct nf_conntrack_tuple tuple = {};
-- bool rev = !skb->_nfct;
-+ bool rev = !skb->_nfct, upd = false;
-+ __be32 ip;
-
- if (skb_protocol(skb, true) != htons(ETH_P_IP))
-- return;
-+ return false;
-
- if (!nf_ct_get_tuple_skb(&tuple, skb))
-- return;
-+ return false;
-
-- keys->addrs.v4addrs.src = rev ? tuple.dst.u3.ip : tuple.src.u3.ip;
-- keys->addrs.v4addrs.dst = rev ? tuple.src.u3.ip : tuple.dst.u3.ip;
-+ ip = rev ? tuple.dst.u3.ip : tuple.src.u3.ip;
-+ if (ip != keys->addrs.v4addrs.src) {
-+ keys->addrs.v4addrs.src = ip;
-+ upd = true;
-+ }
-+ ip = rev ? tuple.src.u3.ip : tuple.dst.u3.ip;
-+ if (ip != keys->addrs.v4addrs.dst) {
-+ keys->addrs.v4addrs.dst = ip;
-+ upd = true;
-+ }
-
- if (keys->ports.ports) {
-- keys->ports.src = rev ? tuple.dst.u.all : tuple.src.u.all;
-- keys->ports.dst = rev ? tuple.src.u.all : tuple.dst.u.all;
-+ __be16 port;
-+
-+ port = rev ? tuple.dst.u.all : tuple.src.u.all;
-+ if (port != keys->ports.src) {
-+ keys->ports.src = port;
-+ upd = true;
-+ }
-+ port = rev ? tuple.src.u.all : tuple.dst.u.all;
-+ if (port != keys->ports.dst) {
-+ port = keys->ports.dst;
-+ upd = true;
-+ }
- }
-+ return upd;
-+#else
-+ return false;
- #endif
- }
-
-@@ -624,23 +646,36 @@ static bool cake_ddst(int flow_mode)
- static u32 cake_hash(struct cake_tin_data *q, const struct sk_buff *skb,
- int flow_mode, u16 flow_override, u16 host_override)
- {
-+ bool hash_flows = (!flow_override && !!(flow_mode & CAKE_FLOW_FLOWS));
-+ bool hash_hosts = (!host_override && !!(flow_mode & CAKE_FLOW_HOSTS));
-+ bool nat_enabled = !!(flow_mode & CAKE_FLOW_NAT_FLAG);
- u32 flow_hash = 0, srchost_hash = 0, dsthost_hash = 0;
- u16 reduced_hash, srchost_idx, dsthost_idx;
- struct flow_keys keys, host_keys;
-+ bool use_skbhash = skb->l4_hash;
-
- if (unlikely(flow_mode == CAKE_FLOW_NONE))
- return 0;
-
-- /* If both overrides are set we can skip packet dissection entirely */
-- if ((flow_override || !(flow_mode & CAKE_FLOW_FLOWS)) &&
-- (host_override || !(flow_mode & CAKE_FLOW_HOSTS)))
-+ /* If both overrides are set, or we can use the SKB hash and nat mode is
-+ * disabled, we can skip packet dissection entirely. If nat mode is
-+ * enabled there's another check below after doing the conntrack lookup.
-+ */
-+ if ((!hash_flows || (use_skbhash && !nat_enabled)) && !hash_hosts)
- goto skip_hash;
-
- skb_flow_dissect_flow_keys(skb, &keys,
- FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL);
-
-- if (flow_mode & CAKE_FLOW_NAT_FLAG)
-- cake_update_flowkeys(&keys, skb);
-+ /* Don't use the SKB hash if we change the lookup keys from conntrack */
-+ if (nat_enabled && cake_update_flowkeys(&keys, skb))
-+ use_skbhash = false;
-+
-+ /* If we can still use the SKB hash and don't need the host hash, we can
-+ * skip the rest of the hashing procedure
-+ */
-+ if (use_skbhash && !hash_hosts)
-+ goto skip_hash;
-
- /* flow_hash_from_keys() sorts the addresses by value, so we have
- * to preserve their order in a separate data structure to treat
-@@ -679,12 +714,14 @@ static u32 cake_hash(struct cake_tin_dat
- /* This *must* be after the above switch, since as a
- * side-effect it sorts the src and dst addresses.
- */
-- if (flow_mode & CAKE_FLOW_FLOWS)
-+ if (hash_flows && !use_skbhash)
- flow_hash = flow_hash_from_keys(&keys);
-
- skip_hash:
- if (flow_override)
- flow_hash = flow_override - 1;
-+ else if (use_skbhash)
-+ flow_hash = skb->hash;
- if (host_override) {
- dsthost_hash = host_override - 1;
- srchost_hash = host_override - 1;
+++ /dev/null
-From b8392808eb3fc28e523e28cb258c81ca246deb9b Mon Sep 17 00:00:00 2001
-From: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
-Date: Thu, 25 Jun 2020 22:18:00 +0200
-Subject: [PATCH] sch_cake: add RFC 8622 LE PHB support to CAKE diffserv
- handling
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Change tin mapping on diffserv3, 4 & 8 for LE PHB support, in essence
-making LE a member of the Bulk tin.
-
-Bulk has the least priority and minimum of 1/16th total bandwidth in the
-face of higher priority traffic.
-
-NB: Diffserv 3 & 4 swap tin 0 & 1 priorities from the default order as
-found in diffserv8, in case anyone is wondering why it looks a bit odd.
-
-Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
-[ reword commit message slightly ]
-Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- net/sched/sch_cake.c | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/net/sched/sch_cake.c
-+++ b/net/sched/sch_cake.c
-@@ -312,8 +312,8 @@ static const u8 precedence[] = {
- };
-
- static const u8 diffserv8[] = {
-- 2, 5, 1, 2, 4, 2, 2, 2,
-- 0, 2, 1, 2, 1, 2, 1, 2,
-+ 2, 0, 1, 2, 4, 2, 2, 2,
-+ 1, 2, 1, 2, 1, 2, 1, 2,
- 5, 2, 4, 2, 4, 2, 4, 2,
- 3, 2, 3, 2, 3, 2, 3, 2,
- 6, 2, 3, 2, 3, 2, 3, 2,
-@@ -323,7 +323,7 @@ static const u8 diffserv8[] = {
- };
-
- static const u8 diffserv4[] = {
-- 0, 2, 0, 0, 2, 0, 0, 0,
-+ 0, 1, 0, 0, 2, 0, 0, 0,
- 1, 0, 0, 0, 0, 0, 0, 0,
- 2, 0, 2, 0, 2, 0, 2, 0,
- 2, 0, 2, 0, 2, 0, 2, 0,
-@@ -334,7 +334,7 @@ static const u8 diffserv4[] = {
- };
-
- static const u8 diffserv3[] = {
-- 0, 0, 0, 0, 2, 0, 0, 0,
-+ 0, 1, 0, 0, 2, 0, 0, 0,
- 1, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 9 Mar 2020 08:30:19 +0100
-Subject: [PATCH] mtd: fix calculating partition end address
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This fixes check for partitions that don't start at beginning of their
-parents. Missing partition's offset in formula could result in forcing
-read-only incorrectly.
-
-Fixes: 6750f61a13a0 ("mtd: improve calculating partition boundaries when checking for alignment")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- drivers/mtd/mtdpart.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -538,7 +538,7 @@ static struct mtd_part *allocate_partiti
- part->name);
- }
-
-- tmp = part_absolute_offset(parent) + slave->mtd.size;
-+ tmp = part_absolute_offset(parent) + slave->offset + slave->mtd.size;
- remainder = do_div(tmp, wr_alignment);
- if ((slave->mtd.flags & MTD_WRITEABLE) && remainder) {
- slave->mtd.flags &= ~MTD_WRITEABLE;
+++ /dev/null
-From 9a4d83074769d6ecf1f5c3fef0f183b09abf3726 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Sat, 6 Oct 2018 17:36:42 +0200
-Subject: [PATCH 1/8] mtd: spinand: winbond: Add support for W25N01GV
-
-W25N01GV is a single die version of the already supported
-W25M02GV with half the capacity. Everything else is the
-same so introduce support for W25N01GV.
-
-Datasheet:http://www.winbond.com/resource-files/w25n01gv%20revl%20050918%20unsecured.pdf
-
-Tested on 8devices Jalapeno dev board under OpenWrt running 4.19-rc5.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
----
- drivers/mtd/nand/spi/winbond.c | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/drivers/mtd/nand/spi/winbond.c
-+++ b/drivers/mtd/nand/spi/winbond.c
-@@ -84,6 +84,14 @@ static const struct spinand_info winbond
- 0,
- SPINAND_ECCINFO(&w25m02gv_ooblayout, NULL),
- SPINAND_SELECT_TARGET(w25m02gv_select_target)),
-+ SPINAND_INFO("W25N01GV", 0xAA,
-+ NAND_MEMORG(1, 2048, 64, 64, 1024, 1, 1, 1),
-+ NAND_ECCREQ(1, 512),
-+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
-+ &write_cache_variants,
-+ &update_cache_variants),
-+ 0,
-+ SPINAND_ECCINFO(&w25m02gv_ooblayout, NULL)),
- };
-
- /**
+++ /dev/null
-From 10949af1681d5bb5cdbcc012815c6e40eec17d02 Mon Sep 17 00:00:00 2001
-From: Schrempf Frieder <frieder.schrempf@kontron.De>
-Date: Thu, 8 Nov 2018 08:32:11 +0000
-Subject: [PATCH 2/8] mtd: spinand: Add initial support for Toshiba TC58CVG2S0H
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Add minimal support for the Toshiba TC58CVG2S0H SPI NAND chip.
-
-Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
-Acked-by: Clément Péron <peron.clem@gmail.com>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
----
- drivers/mtd/nand/spi/Makefile | 2 +-
- drivers/mtd/nand/spi/core.c | 1 +
- drivers/mtd/nand/spi/toshiba.c | 137 +++++++++++++++++++++++++++++++++
- include/linux/mtd/spinand.h | 1 +
- 4 files changed, 140 insertions(+), 1 deletion(-)
- create mode 100644 drivers/mtd/nand/spi/toshiba.c
-
---- a/drivers/mtd/nand/spi/Makefile
-+++ b/drivers/mtd/nand/spi/Makefile
-@@ -1,3 +1,3 @@
- # SPDX-License-Identifier: GPL-2.0
--spinand-objs := core.o macronix.o micron.o winbond.o
-+spinand-objs := core.o macronix.o micron.o toshiba.o winbond.o
- obj-$(CONFIG_MTD_SPI_NAND) += spinand.o
---- a/drivers/mtd/nand/spi/core.c
-+++ b/drivers/mtd/nand/spi/core.c
-@@ -762,6 +762,7 @@ static const struct nand_ops spinand_ops
- static const struct spinand_manufacturer *spinand_manufacturers[] = {
- ¯onix_spinand_manufacturer,
- µn_spinand_manufacturer,
-+ &toshiba_spinand_manufacturer,
- &winbond_spinand_manufacturer,
- };
-
---- /dev/null
-+++ b/drivers/mtd/nand/spi/toshiba.c
-@@ -0,0 +1,137 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (c) 2018 exceet electronics GmbH
-+ * Copyright (c) 2018 Kontron Electronics GmbH
-+ *
-+ * Author: Frieder Schrempf <frieder.schrempf@kontron.de>
-+ */
-+
-+#include <linux/device.h>
-+#include <linux/kernel.h>
-+#include <linux/mtd/spinand.h>
-+
-+#define SPINAND_MFR_TOSHIBA 0x98
-+#define TOSH_STATUS_ECC_HAS_BITFLIPS_T (3 << 4)
-+
-+static SPINAND_OP_VARIANTS(read_cache_variants,
-+ SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
-+ SPINAND_PAGE_READ_FROM_CACHE_X2_OP(0, 1, NULL, 0),
-+ SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
-+ SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
-+
-+static SPINAND_OP_VARIANTS(write_cache_variants,
-+ SPINAND_PROG_LOAD(true, 0, NULL, 0));
-+
-+static SPINAND_OP_VARIANTS(update_cache_variants,
-+ SPINAND_PROG_LOAD(false, 0, NULL, 0));
-+
-+static int tc58cvg2s0h_ooblayout_ecc(struct mtd_info *mtd, int section,
-+ struct mtd_oob_region *region)
-+{
-+ if (section > 7)
-+ return -ERANGE;
-+
-+ region->offset = 128 + 16 * section;
-+ region->length = 16;
-+
-+ return 0;
-+}
-+
-+static int tc58cvg2s0h_ooblayout_free(struct mtd_info *mtd, int section,
-+ struct mtd_oob_region *region)
-+{
-+ if (section > 0)
-+ return -ERANGE;
-+
-+ /* 2 bytes reserved for BBM */
-+ region->offset = 2;
-+ region->length = 126;
-+
-+ return 0;
-+}
-+
-+static const struct mtd_ooblayout_ops tc58cvg2s0h_ooblayout = {
-+ .ecc = tc58cvg2s0h_ooblayout_ecc,
-+ .free = tc58cvg2s0h_ooblayout_free,
-+};
-+
-+static int tc58cvg2s0h_ecc_get_status(struct spinand_device *spinand,
-+ u8 status)
-+{
-+ struct nand_device *nand = spinand_to_nand(spinand);
-+ u8 mbf = 0;
-+ struct spi_mem_op op = SPINAND_GET_FEATURE_OP(0x30, &mbf);
-+
-+ switch (status & STATUS_ECC_MASK) {
-+ case STATUS_ECC_NO_BITFLIPS:
-+ return 0;
-+
-+ case STATUS_ECC_UNCOR_ERROR:
-+ return -EBADMSG;
-+
-+ case STATUS_ECC_HAS_BITFLIPS:
-+ case TOSH_STATUS_ECC_HAS_BITFLIPS_T:
-+ /*
-+ * Let's try to retrieve the real maximum number of bitflips
-+ * in order to avoid forcing the wear-leveling layer to move
-+ * data around if it's not necessary.
-+ */
-+ if (spi_mem_exec_op(spinand->spimem, &op))
-+ return nand->eccreq.strength;
-+
-+ mbf >>= 4;
-+
-+ if (WARN_ON(mbf > nand->eccreq.strength || !mbf))
-+ return nand->eccreq.strength;
-+
-+ return mbf;
-+
-+ default:
-+ break;
-+ }
-+
-+ return -EINVAL;
-+}
-+
-+static const struct spinand_info toshiba_spinand_table[] = {
-+ SPINAND_INFO("TC58CVG2S0H", 0xCD,
-+ NAND_MEMORG(1, 4096, 256, 64, 2048, 1, 1, 1),
-+ NAND_ECCREQ(8, 512),
-+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
-+ &write_cache_variants,
-+ &update_cache_variants),
-+ SPINAND_HAS_QE_BIT,
-+ SPINAND_ECCINFO(&tc58cvg2s0h_ooblayout,
-+ tc58cvg2s0h_ecc_get_status)),
-+};
-+
-+static int toshiba_spinand_detect(struct spinand_device *spinand)
-+{
-+ u8 *id = spinand->id.data;
-+ int ret;
-+
-+ /*
-+ * Toshiba SPI NAND read ID needs a dummy byte,
-+ * so the first byte in id is garbage.
-+ */
-+ if (id[1] != SPINAND_MFR_TOSHIBA)
-+ return 0;
-+
-+ ret = spinand_match_and_init(spinand, toshiba_spinand_table,
-+ ARRAY_SIZE(toshiba_spinand_table),
-+ id[2]);
-+ if (ret)
-+ return ret;
-+
-+ return 1;
-+}
-+
-+static const struct spinand_manufacturer_ops toshiba_spinand_manuf_ops = {
-+ .detect = toshiba_spinand_detect,
-+};
-+
-+const struct spinand_manufacturer toshiba_spinand_manufacturer = {
-+ .id = SPINAND_MFR_TOSHIBA,
-+ .name = "Toshiba",
-+ .ops = &toshiba_spinand_manuf_ops,
-+};
---- a/include/linux/mtd/spinand.h
-+++ b/include/linux/mtd/spinand.h
-@@ -196,6 +196,7 @@ struct spinand_manufacturer {
- /* SPI NAND manufacturers */
- extern const struct spinand_manufacturer macronix_spinand_manufacturer;
- extern const struct spinand_manufacturer micron_spinand_manufacturer;
-+extern const struct spinand_manufacturer toshiba_spinand_manufacturer;
- extern const struct spinand_manufacturer winbond_spinand_manufacturer;
-
- /**
+++ /dev/null
-From c93c613214ac70c87beab5422a60077bf126b855 Mon Sep 17 00:00:00 2001
-From: Chuanhong Guo <gch981213@gmail.com>
-Date: Wed, 28 Nov 2018 21:07:25 +0800
-Subject: [PATCH 3/8] mtd: spinand: add support for GigaDevice GD5FxGQ4xA
-
-Add support for GigaDevice GD5F1G/2G/4GQ4xA SPI NAND.
-
-Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
-Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
----
- drivers/mtd/nand/spi/Makefile | 2 +-
- drivers/mtd/nand/spi/core.c | 1 +
- drivers/mtd/nand/spi/gigadevice.c | 148 ++++++++++++++++++++++++++++++
- include/linux/mtd/spinand.h | 1 +
- 4 files changed, 151 insertions(+), 1 deletion(-)
- create mode 100644 drivers/mtd/nand/spi/gigadevice.c
-
---- a/drivers/mtd/nand/spi/Makefile
-+++ b/drivers/mtd/nand/spi/Makefile
-@@ -1,3 +1,3 @@
- # SPDX-License-Identifier: GPL-2.0
--spinand-objs := core.o macronix.o micron.o toshiba.o winbond.o
-+spinand-objs := core.o gigadevice.o macronix.o micron.o toshiba.o winbond.o
- obj-$(CONFIG_MTD_SPI_NAND) += spinand.o
---- a/drivers/mtd/nand/spi/core.c
-+++ b/drivers/mtd/nand/spi/core.c
-@@ -760,6 +760,7 @@ static const struct nand_ops spinand_ops
- };
-
- static const struct spinand_manufacturer *spinand_manufacturers[] = {
-+ &gigadevice_spinand_manufacturer,
- ¯onix_spinand_manufacturer,
- µn_spinand_manufacturer,
- &toshiba_spinand_manufacturer,
---- /dev/null
-+++ b/drivers/mtd/nand/spi/gigadevice.c
-@@ -0,0 +1,148 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Author:
-+ * Chuanhong Guo <gch981213@gmail.com>
-+ */
-+
-+#include <linux/device.h>
-+#include <linux/kernel.h>
-+#include <linux/mtd/spinand.h>
-+
-+#define SPINAND_MFR_GIGADEVICE 0xC8
-+#define GD5FXGQ4XA_STATUS_ECC_1_7_BITFLIPS (1 << 4)
-+#define GD5FXGQ4XA_STATUS_ECC_8_BITFLIPS (3 << 4)
-+
-+static SPINAND_OP_VARIANTS(read_cache_variants,
-+ SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
-+ SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
-+ SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
-+ SPINAND_PAGE_READ_FROM_CACHE_X2_OP(0, 1, NULL, 0),
-+ SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
-+ SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
-+
-+static SPINAND_OP_VARIANTS(write_cache_variants,
-+ SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
-+ SPINAND_PROG_LOAD(true, 0, NULL, 0));
-+
-+static SPINAND_OP_VARIANTS(update_cache_variants,
-+ SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
-+ SPINAND_PROG_LOAD(false, 0, NULL, 0));
-+
-+static int gd5fxgq4xa_ooblayout_ecc(struct mtd_info *mtd, int section,
-+ struct mtd_oob_region *region)
-+{
-+ if (section > 3)
-+ return -ERANGE;
-+
-+ region->offset = (16 * section) + 8;
-+ region->length = 8;
-+
-+ return 0;
-+}
-+
-+static int gd5fxgq4xa_ooblayout_free(struct mtd_info *mtd, int section,
-+ struct mtd_oob_region *region)
-+{
-+ if (section > 3)
-+ return -ERANGE;
-+
-+ if (section) {
-+ region->offset = 16 * section;
-+ region->length = 8;
-+ } else {
-+ /* section 0 has one byte reserved for bad block mark */
-+ region->offset = 1;
-+ region->length = 7;
-+ }
-+ return 0;
-+}
-+
-+static int gd5fxgq4xa_ecc_get_status(struct spinand_device *spinand,
-+ u8 status)
-+{
-+ switch (status & STATUS_ECC_MASK) {
-+ case STATUS_ECC_NO_BITFLIPS:
-+ return 0;
-+
-+ case GD5FXGQ4XA_STATUS_ECC_1_7_BITFLIPS:
-+ /* 1-7 bits are flipped. return the maximum. */
-+ return 7;
-+
-+ case GD5FXGQ4XA_STATUS_ECC_8_BITFLIPS:
-+ return 8;
-+
-+ case STATUS_ECC_UNCOR_ERROR:
-+ return -EBADMSG;
-+
-+ default:
-+ break;
-+ }
-+
-+ return -EINVAL;
-+}
-+
-+static const struct mtd_ooblayout_ops gd5fxgq4xa_ooblayout = {
-+ .ecc = gd5fxgq4xa_ooblayout_ecc,
-+ .free = gd5fxgq4xa_ooblayout_free,
-+};
-+
-+static const struct spinand_info gigadevice_spinand_table[] = {
-+ SPINAND_INFO("GD5F1GQ4xA", 0xF1,
-+ NAND_MEMORG(1, 2048, 64, 64, 1024, 1, 1, 1),
-+ NAND_ECCREQ(8, 512),
-+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
-+ &write_cache_variants,
-+ &update_cache_variants),
-+ 0,
-+ SPINAND_ECCINFO(&gd5fxgq4xa_ooblayout,
-+ gd5fxgq4xa_ecc_get_status)),
-+ SPINAND_INFO("GD5F2GQ4xA", 0xF2,
-+ NAND_MEMORG(1, 2048, 64, 64, 2048, 1, 1, 1),
-+ NAND_ECCREQ(8, 512),
-+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
-+ &write_cache_variants,
-+ &update_cache_variants),
-+ 0,
-+ SPINAND_ECCINFO(&gd5fxgq4xa_ooblayout,
-+ gd5fxgq4xa_ecc_get_status)),
-+ SPINAND_INFO("GD5F4GQ4xA", 0xF4,
-+ NAND_MEMORG(1, 2048, 64, 64, 4096, 1, 1, 1),
-+ NAND_ECCREQ(8, 512),
-+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
-+ &write_cache_variants,
-+ &update_cache_variants),
-+ 0,
-+ SPINAND_ECCINFO(&gd5fxgq4xa_ooblayout,
-+ gd5fxgq4xa_ecc_get_status)),
-+};
-+
-+static int gigadevice_spinand_detect(struct spinand_device *spinand)
-+{
-+ u8 *id = spinand->id.data;
-+ int ret;
-+
-+ /*
-+ * For GD NANDs, There is an address byte needed to shift in before IDs
-+ * are read out, so the first byte in raw_id is dummy.
-+ */
-+ if (id[1] != SPINAND_MFR_GIGADEVICE)
-+ return 0;
-+
-+ ret = spinand_match_and_init(spinand, gigadevice_spinand_table,
-+ ARRAY_SIZE(gigadevice_spinand_table),
-+ id[2]);
-+ if (ret)
-+ return ret;
-+
-+ return 1;
-+}
-+
-+static const struct spinand_manufacturer_ops gigadevice_spinand_manuf_ops = {
-+ .detect = gigadevice_spinand_detect,
-+};
-+
-+const struct spinand_manufacturer gigadevice_spinand_manufacturer = {
-+ .id = SPINAND_MFR_GIGADEVICE,
-+ .name = "GigaDevice",
-+ .ops = &gigadevice_spinand_manuf_ops,
-+};
---- a/include/linux/mtd/spinand.h
-+++ b/include/linux/mtd/spinand.h
-@@ -194,6 +194,7 @@ struct spinand_manufacturer {
- };
-
- /* SPI NAND manufacturers */
-+extern const struct spinand_manufacturer gigadevice_spinand_manufacturer;
- extern const struct spinand_manufacturer macronix_spinand_manufacturer;
- extern const struct spinand_manufacturer micron_spinand_manufacturer;
- extern const struct spinand_manufacturer toshiba_spinand_manufacturer;
+++ /dev/null
-From db214513f62fd13c0a9af3bd5c5d634dba37e65d Mon Sep 17 00:00:00 2001
-From: Yoshio Furuyama <tmcmc-mb-yfuruyama7@ml.toshiba.co.jp>
-Date: Wed, 16 Jan 2019 14:53:19 +0900
-Subject: [PATCH 7/8] mtd: spinand: Add support for all Toshiba Memory products
-
-Add device table for Toshiba Memory products.
-Also, generalize OOB layout structure and function names.
-
-Signed-off-by: Yoshio Furuyama <tmcmc-mb-yfuruyama7@ml.toshiba.co.jp>
-Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
----
- drivers/mtd/nand/spi/toshiba.c | 79 ++++++++++++++++++++++++++++------
- 1 file changed, 65 insertions(+), 14 deletions(-)
-
---- a/drivers/mtd/nand/spi/toshiba.c
-+++ b/drivers/mtd/nand/spi/toshiba.c
-@@ -25,19 +25,19 @@ static SPINAND_OP_VARIANTS(write_cache_v
- static SPINAND_OP_VARIANTS(update_cache_variants,
- SPINAND_PROG_LOAD(false, 0, NULL, 0));
-
--static int tc58cvg2s0h_ooblayout_ecc(struct mtd_info *mtd, int section,
-+static int tc58cxgxsx_ooblayout_ecc(struct mtd_info *mtd, int section,
- struct mtd_oob_region *region)
- {
-- if (section > 7)
-+ if (section > 0)
- return -ERANGE;
-
-- region->offset = 128 + 16 * section;
-- region->length = 16;
-+ region->offset = mtd->oobsize / 2;
-+ region->length = mtd->oobsize / 2;
-
- return 0;
- }
-
--static int tc58cvg2s0h_ooblayout_free(struct mtd_info *mtd, int section,
-+static int tc58cxgxsx_ooblayout_free(struct mtd_info *mtd, int section,
- struct mtd_oob_region *region)
- {
- if (section > 0)
-@@ -45,17 +45,17 @@ static int tc58cvg2s0h_ooblayout_free(st
-
- /* 2 bytes reserved for BBM */
- region->offset = 2;
-- region->length = 126;
-+ region->length = (mtd->oobsize / 2) - 2;
-
- return 0;
- }
-
--static const struct mtd_ooblayout_ops tc58cvg2s0h_ooblayout = {
-- .ecc = tc58cvg2s0h_ooblayout_ecc,
-- .free = tc58cvg2s0h_ooblayout_free,
-+static const struct mtd_ooblayout_ops tc58cxgxsx_ooblayout = {
-+ .ecc = tc58cxgxsx_ooblayout_ecc,
-+ .free = tc58cxgxsx_ooblayout_free,
- };
-
--static int tc58cvg2s0h_ecc_get_status(struct spinand_device *spinand,
-+static int tc58cxgxsx_ecc_get_status(struct spinand_device *spinand,
- u8 status)
- {
- struct nand_device *nand = spinand_to_nand(spinand);
-@@ -94,15 +94,66 @@ static int tc58cvg2s0h_ecc_get_status(st
- }
-
- static const struct spinand_info toshiba_spinand_table[] = {
-- SPINAND_INFO("TC58CVG2S0H", 0xCD,
-+ /* 3.3V 1Gb */
-+ SPINAND_INFO("TC58CVG0S3", 0xC2,
-+ NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1),
-+ NAND_ECCREQ(8, 512),
-+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
-+ &write_cache_variants,
-+ &update_cache_variants),
-+ 0,
-+ SPINAND_ECCINFO(&tc58cxgxsx_ooblayout,
-+ tc58cxgxsx_ecc_get_status)),
-+ /* 3.3V 2Gb */
-+ SPINAND_INFO("TC58CVG1S3", 0xCB,
-+ NAND_MEMORG(1, 2048, 128, 64, 2048, 1, 1, 1),
-+ NAND_ECCREQ(8, 512),
-+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
-+ &write_cache_variants,
-+ &update_cache_variants),
-+ 0,
-+ SPINAND_ECCINFO(&tc58cxgxsx_ooblayout,
-+ tc58cxgxsx_ecc_get_status)),
-+ /* 3.3V 4Gb */
-+ SPINAND_INFO("TC58CVG2S0", 0xCD,
-+ NAND_MEMORG(1, 4096, 256, 64, 2048, 1, 1, 1),
-+ NAND_ECCREQ(8, 512),
-+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
-+ &write_cache_variants,
-+ &update_cache_variants),
-+ 0,
-+ SPINAND_ECCINFO(&tc58cxgxsx_ooblayout,
-+ tc58cxgxsx_ecc_get_status)),
-+ /* 1.8V 1Gb */
-+ SPINAND_INFO("TC58CYG0S3", 0xB2,
-+ NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1),
-+ NAND_ECCREQ(8, 512),
-+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
-+ &write_cache_variants,
-+ &update_cache_variants),
-+ 0,
-+ SPINAND_ECCINFO(&tc58cxgxsx_ooblayout,
-+ tc58cxgxsx_ecc_get_status)),
-+ /* 1.8V 2Gb */
-+ SPINAND_INFO("TC58CYG1S3", 0xBB,
-+ NAND_MEMORG(1, 2048, 128, 64, 2048, 1, 1, 1),
-+ NAND_ECCREQ(8, 512),
-+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
-+ &write_cache_variants,
-+ &update_cache_variants),
-+ 0,
-+ SPINAND_ECCINFO(&tc58cxgxsx_ooblayout,
-+ tc58cxgxsx_ecc_get_status)),
-+ /* 1.8V 4Gb */
-+ SPINAND_INFO("TC58CYG2S0", 0xBD,
- NAND_MEMORG(1, 4096, 256, 64, 2048, 1, 1, 1),
- NAND_ECCREQ(8, 512),
- SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
- &write_cache_variants,
- &update_cache_variants),
-- SPINAND_HAS_QE_BIT,
-- SPINAND_ECCINFO(&tc58cvg2s0h_ooblayout,
-- tc58cvg2s0h_ecc_get_status)),
-+ 0,
-+ SPINAND_ECCINFO(&tc58cxgxsx_ooblayout,
-+ tc58cxgxsx_ecc_get_status)),
- };
-
- static int toshiba_spinand_detect(struct spinand_device *spinand)
+++ /dev/null
-From c40c7a990a46e5102a1cc4190557bf315d32d80d Mon Sep 17 00:00:00 2001
-From: Stefan Roese <sr@denx.de>
-Date: Thu, 24 Jan 2019 13:48:06 +0100
-Subject: [PATCH 8/8] mtd: spinand: Add support for GigaDevice GD5F1GQ4UExxG
-
-Add support for GigaDevice GD5F1GQ4UExxG SPI NAND chip.
-
-Signed-off-by: Stefan Roese <sr@denx.de>
-Cc: Chuanhong Guo <gch981213@gmail.com>
-Cc: Frieder Schrempf <frieder.schrempf@kontron.de>
-Cc: Miquel Raynal <miquel.raynal@bootlin.com>
-Cc: Boris Brezillon <bbrezillon@kernel.org>
-Reviewed-by: Boris Brezillon <bbrezillon@kernel.org>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
----
- drivers/mtd/nand/spi/gigadevice.c | 83 +++++++++++++++++++++++++++++++
- 1 file changed, 83 insertions(+)
-
---- a/drivers/mtd/nand/spi/gigadevice.c
-+++ b/drivers/mtd/nand/spi/gigadevice.c
-@@ -12,6 +12,8 @@
- #define GD5FXGQ4XA_STATUS_ECC_1_7_BITFLIPS (1 << 4)
- #define GD5FXGQ4XA_STATUS_ECC_8_BITFLIPS (3 << 4)
-
-+#define GD5FXGQ4UEXXG_REG_STATUS2 0xf0
-+
- static SPINAND_OP_VARIANTS(read_cache_variants,
- SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
- SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
-@@ -81,11 +83,83 @@ static int gd5fxgq4xa_ecc_get_status(str
- return -EINVAL;
- }
-
-+static int gd5fxgq4uexxg_ooblayout_ecc(struct mtd_info *mtd, int section,
-+ struct mtd_oob_region *region)
-+{
-+ if (section)
-+ return -ERANGE;
-+
-+ region->offset = 64;
-+ region->length = 64;
-+
-+ return 0;
-+}
-+
-+static int gd5fxgq4uexxg_ooblayout_free(struct mtd_info *mtd, int section,
-+ struct mtd_oob_region *region)
-+{
-+ if (section)
-+ return -ERANGE;
-+
-+ /* Reserve 1 bytes for the BBM. */
-+ region->offset = 1;
-+ region->length = 63;
-+
-+ return 0;
-+}
-+
-+static int gd5fxgq4uexxg_ecc_get_status(struct spinand_device *spinand,
-+ u8 status)
-+{
-+ u8 status2;
-+ struct spi_mem_op op = SPINAND_GET_FEATURE_OP(GD5FXGQ4UEXXG_REG_STATUS2,
-+ &status2);
-+ int ret;
-+
-+ switch (status & STATUS_ECC_MASK) {
-+ case STATUS_ECC_NO_BITFLIPS:
-+ return 0;
-+
-+ case GD5FXGQ4XA_STATUS_ECC_1_7_BITFLIPS:
-+ /*
-+ * Read status2 register to determine a more fine grained
-+ * bit error status
-+ */
-+ ret = spi_mem_exec_op(spinand->spimem, &op);
-+ if (ret)
-+ return ret;
-+
-+ /*
-+ * 4 ... 7 bits are flipped (1..4 can't be detected, so
-+ * report the maximum of 4 in this case
-+ */
-+ /* bits sorted this way (3...0): ECCS1,ECCS0,ECCSE1,ECCSE0 */
-+ return ((status & STATUS_ECC_MASK) >> 2) |
-+ ((status2 & STATUS_ECC_MASK) >> 4);
-+
-+ case GD5FXGQ4XA_STATUS_ECC_8_BITFLIPS:
-+ return 8;
-+
-+ case STATUS_ECC_UNCOR_ERROR:
-+ return -EBADMSG;
-+
-+ default:
-+ break;
-+ }
-+
-+ return -EINVAL;
-+}
-+
- static const struct mtd_ooblayout_ops gd5fxgq4xa_ooblayout = {
- .ecc = gd5fxgq4xa_ooblayout_ecc,
- .free = gd5fxgq4xa_ooblayout_free,
- };
-
-+static const struct mtd_ooblayout_ops gd5fxgq4uexxg_ooblayout = {
-+ .ecc = gd5fxgq4uexxg_ooblayout_ecc,
-+ .free = gd5fxgq4uexxg_ooblayout_free,
-+};
-+
- static const struct spinand_info gigadevice_spinand_table[] = {
- SPINAND_INFO("GD5F1GQ4xA", 0xF1,
- NAND_MEMORG(1, 2048, 64, 64, 1024, 1, 1, 1),
-@@ -114,6 +188,15 @@ static const struct spinand_info gigadev
- 0,
- SPINAND_ECCINFO(&gd5fxgq4xa_ooblayout,
- gd5fxgq4xa_ecc_get_status)),
-+ SPINAND_INFO("GD5F1GQ4UExxG", 0xd1,
-+ NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1),
-+ NAND_ECCREQ(8, 512),
-+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
-+ &write_cache_variants,
-+ &update_cache_variants),
-+ 0,
-+ SPINAND_ECCINFO(&gd5fxgq4uexxg_ooblayout,
-+ gd5fxgq4uexxg_ecc_get_status)),
- };
-
- static int gigadevice_spinand_detect(struct spinand_device *spinand)
+++ /dev/null
-From 81554171373018b83f3554b9e725d2b5bf1844a5 Mon Sep 17 00:00:00 2001
-From: Alexander Sverdlin <alexander.sverdlin@nokia.com>
-Date: Fri, 13 Jul 2018 15:06:46 +0200
-Subject: [PATCH] mtd: spi-nor: Add support for mx25u12835f
-
-This chip supports dual and quad read and uniform 4K-byte erase.
-
-Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
-Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
-Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
----
- drivers/mtd/spi-nor/spi-nor.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1088,6 +1088,8 @@ static const struct flash_info spi_nor_i
- { "mx25u6435f", INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) },
- { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
- { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
-+ { "mx25u12835f", INFO(0xc22538, 0, 64 * 1024, 256,
-+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) },
- { "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
+++ /dev/null
-From d014717d50b1efd011a3a028ce92563a4dc9bae5 Mon Sep 17 00:00:00 2001
-From: Jeff Kletsky <git-commits@allycomm.com>
-Date: Wed, 22 May 2019 15:05:53 -0700
-Subject: [PATCH 1/3] mtd: spinand: Define macros for page-read ops with
- three-byte addresses
-
-The GigaDevice GD5F1GQ4UFxxG SPI NAND utilizes three-byte addresses
-for its page-read ops.
-
-http://www.gigadevice.com/datasheet/gd5f1gq4xfxxg/
-
-Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
-Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
----
- include/linux/mtd/spinand.h | 30 ++++++++++++++++++++++++++++++
- 1 file changed, 30 insertions(+)
-
---- a/include/linux/mtd/spinand.h
-+++ b/include/linux/mtd/spinand.h
-@@ -68,30 +68,60 @@
- SPI_MEM_OP_DUMMY(ndummy, 1), \
- SPI_MEM_OP_DATA_IN(len, buf, 1))
-
-+#define SPINAND_PAGE_READ_FROM_CACHE_OP_3A(fast, addr, ndummy, buf, len) \
-+ SPI_MEM_OP(SPI_MEM_OP_CMD(fast ? 0x0b : 0x03, 1), \
-+ SPI_MEM_OP_ADDR(3, addr, 1), \
-+ SPI_MEM_OP_DUMMY(ndummy, 1), \
-+ SPI_MEM_OP_DATA_IN(len, buf, 1))
-+
- #define SPINAND_PAGE_READ_FROM_CACHE_X2_OP(addr, ndummy, buf, len) \
- SPI_MEM_OP(SPI_MEM_OP_CMD(0x3b, 1), \
- SPI_MEM_OP_ADDR(2, addr, 1), \
- SPI_MEM_OP_DUMMY(ndummy, 1), \
- SPI_MEM_OP_DATA_IN(len, buf, 2))
-
-+#define SPINAND_PAGE_READ_FROM_CACHE_X2_OP_3A(addr, ndummy, buf, len) \
-+ SPI_MEM_OP(SPI_MEM_OP_CMD(0x3b, 1), \
-+ SPI_MEM_OP_ADDR(3, addr, 1), \
-+ SPI_MEM_OP_DUMMY(ndummy, 1), \
-+ SPI_MEM_OP_DATA_IN(len, buf, 2))
-+
- #define SPINAND_PAGE_READ_FROM_CACHE_X4_OP(addr, ndummy, buf, len) \
- SPI_MEM_OP(SPI_MEM_OP_CMD(0x6b, 1), \
- SPI_MEM_OP_ADDR(2, addr, 1), \
- SPI_MEM_OP_DUMMY(ndummy, 1), \
- SPI_MEM_OP_DATA_IN(len, buf, 4))
-
-+#define SPINAND_PAGE_READ_FROM_CACHE_X4_OP_3A(addr, ndummy, buf, len) \
-+ SPI_MEM_OP(SPI_MEM_OP_CMD(0x6b, 1), \
-+ SPI_MEM_OP_ADDR(3, addr, 1), \
-+ SPI_MEM_OP_DUMMY(ndummy, 1), \
-+ SPI_MEM_OP_DATA_IN(len, buf, 4))
-+
- #define SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(addr, ndummy, buf, len) \
- SPI_MEM_OP(SPI_MEM_OP_CMD(0xbb, 1), \
- SPI_MEM_OP_ADDR(2, addr, 2), \
- SPI_MEM_OP_DUMMY(ndummy, 2), \
- SPI_MEM_OP_DATA_IN(len, buf, 2))
-
-+#define SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP_3A(addr, ndummy, buf, len) \
-+ SPI_MEM_OP(SPI_MEM_OP_CMD(0xbb, 1), \
-+ SPI_MEM_OP_ADDR(3, addr, 2), \
-+ SPI_MEM_OP_DUMMY(ndummy, 2), \
-+ SPI_MEM_OP_DATA_IN(len, buf, 2))
-+
- #define SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(addr, ndummy, buf, len) \
- SPI_MEM_OP(SPI_MEM_OP_CMD(0xeb, 1), \
- SPI_MEM_OP_ADDR(2, addr, 4), \
- SPI_MEM_OP_DUMMY(ndummy, 4), \
- SPI_MEM_OP_DATA_IN(len, buf, 4))
-
-+#define SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP_3A(addr, ndummy, buf, len) \
-+ SPI_MEM_OP(SPI_MEM_OP_CMD(0xeb, 1), \
-+ SPI_MEM_OP_ADDR(3, addr, 4), \
-+ SPI_MEM_OP_DUMMY(ndummy, 4), \
-+ SPI_MEM_OP_DATA_IN(len, buf, 4))
-+
- #define SPINAND_PROG_EXEC_OP(addr) \
- SPI_MEM_OP(SPI_MEM_OP_CMD(0x10, 1), \
- SPI_MEM_OP_ADDR(3, addr, 1), \
+++ /dev/null
-From 53dd94a79d3bfdaae30e5a4ebf474ea1af1d572e Mon Sep 17 00:00:00 2001
-From: Jeff Kletsky <git-commits@allycomm.com>
-Date: Wed, 22 May 2019 15:05:54 -0700
-Subject: [PATCH 2/3] mtd: spinand: Add support for two-byte device IDs
-
-The GigaDevice GD5F1GQ4UFxxG SPI NAND utilizes two-byte device IDs.
-
-http://www.gigadevice.com/datasheet/gd5f1gq4xfxxg/
-
-Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
-Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
----
- drivers/mtd/nand/spi/core.c | 2 +-
- include/linux/mtd/spinand.h | 4 ++--
- 2 files changed, 3 insertions(+), 3 deletions(-)
-
---- a/drivers/mtd/nand/spi/core.c
-+++ b/drivers/mtd/nand/spi/core.c
-@@ -851,7 +851,7 @@ spinand_select_op_variant(struct spinand
- */
- int spinand_match_and_init(struct spinand_device *spinand,
- const struct spinand_info *table,
-- unsigned int table_size, u8 devid)
-+ unsigned int table_size, u16 devid)
- {
- struct nand_device *nand = spinand_to_nand(spinand);
- unsigned int i;
---- a/include/linux/mtd/spinand.h
-+++ b/include/linux/mtd/spinand.h
-@@ -290,7 +290,7 @@ struct spinand_ecc_info {
- */
- struct spinand_info {
- const char *model;
-- u8 devid;
-+ u16 devid;
- u32 flags;
- struct nand_memory_organization memorg;
- struct nand_ecc_req eccreq;
-@@ -445,7 +445,7 @@ static inline void spinand_set_of_node(s
-
- int spinand_match_and_init(struct spinand_device *dev,
- const struct spinand_info *table,
-- unsigned int table_size, u8 devid);
-+ unsigned int table_size, u16 devid);
-
- int spinand_upd_cfg(struct spinand_device *spinand, u8 mask, u8 val);
- int spinand_select_target(struct spinand_device *spinand, unsigned int target);
+++ /dev/null
-
-IMPORTANT NOTE
-==============
-
-The content of this patch has been adapted for Linux 4.19
-
-Changes were made in Linux 5.x to add the bad-block limit
-to the metadata available to the driver, adding a parameter
-
-NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
- ^- New bad-block limit
-
-This patch omits that parameter from the upstream patch
-for compatibility with the Linux 4.19 driver.
-
-=====
-
-From 049df13c4e63884fe6634db5568e08f65922256e Mon Sep 17 00:00:00 2001
-From: Jeff Kletsky <git-commits@allycomm.com>
-Date: Wed, 22 May 2019 15:05:55 -0700
-Subject: [PATCH 3/3] mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG
-
-The GigaDevice GD5F1GQ4UFxxG SPI NAND is in current production devices
-and, while it has the same logical layout as the E-series devices,
-it differs in the SPI interfacing in significant ways.
-
-This support is contingent on previous commits to:
-
- * Add support for two-byte device IDs
- * Define macros for page-read ops with three-byte addresses
-
-http://www.gigadevice.com/datasheet/gd5f1gq4xfxxg/
-
-Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
-Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
----
- drivers/mtd/nand/spi/gigadevice.c | 79 +++++++++++++++++++++++++------
- 1 file changed, 64 insertions(+), 15 deletions(-)
-
---- a/drivers/mtd/nand/spi/gigadevice.c
-+++ b/drivers/mtd/nand/spi/gigadevice.c
-@@ -9,11 +9,17 @@
- #include <linux/mtd/spinand.h>
-
- #define SPINAND_MFR_GIGADEVICE 0xC8
-+
- #define GD5FXGQ4XA_STATUS_ECC_1_7_BITFLIPS (1 << 4)
- #define GD5FXGQ4XA_STATUS_ECC_8_BITFLIPS (3 << 4)
-
- #define GD5FXGQ4UEXXG_REG_STATUS2 0xf0
-
-+#define GD5FXGQ4UXFXXG_STATUS_ECC_MASK (7 << 4)
-+#define GD5FXGQ4UXFXXG_STATUS_ECC_NO_BITFLIPS (0 << 4)
-+#define GD5FXGQ4UXFXXG_STATUS_ECC_1_3_BITFLIPS (1 << 4)
-+#define GD5FXGQ4UXFXXG_STATUS_ECC_UNCOR_ERROR (7 << 4)
-+
- static SPINAND_OP_VARIANTS(read_cache_variants,
- SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
- SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
-@@ -22,6 +28,14 @@ static SPINAND_OP_VARIANTS(read_cache_va
- SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
- SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
-
-+static SPINAND_OP_VARIANTS(read_cache_variants_f,
-+ SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
-+ SPINAND_PAGE_READ_FROM_CACHE_X4_OP_3A(0, 1, NULL, 0),
-+ SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
-+ SPINAND_PAGE_READ_FROM_CACHE_X2_OP_3A(0, 1, NULL, 0),
-+ SPINAND_PAGE_READ_FROM_CACHE_OP_3A(true, 0, 1, NULL, 0),
-+ SPINAND_PAGE_READ_FROM_CACHE_OP_3A(false, 0, 0, NULL, 0));
-+
- static SPINAND_OP_VARIANTS(write_cache_variants,
- SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
- SPINAND_PROG_LOAD(true, 0, NULL, 0));
-@@ -59,6 +73,11 @@ static int gd5fxgq4xa_ooblayout_free(str
- return 0;
- }
-
-+static const struct mtd_ooblayout_ops gd5fxgq4xa_ooblayout = {
-+ .ecc = gd5fxgq4xa_ooblayout_ecc,
-+ .free = gd5fxgq4xa_ooblayout_free,
-+};
-+
- static int gd5fxgq4xa_ecc_get_status(struct spinand_device *spinand,
- u8 status)
- {
-@@ -83,7 +102,7 @@ static int gd5fxgq4xa_ecc_get_status(str
- return -EINVAL;
- }
-
--static int gd5fxgq4uexxg_ooblayout_ecc(struct mtd_info *mtd, int section,
-+static int gd5fxgq4_variant2_ooblayout_ecc(struct mtd_info *mtd, int section,
- struct mtd_oob_region *region)
- {
- if (section)
-@@ -95,7 +114,7 @@ static int gd5fxgq4uexxg_ooblayout_ecc(s
- return 0;
- }
-
--static int gd5fxgq4uexxg_ooblayout_free(struct mtd_info *mtd, int section,
-+static int gd5fxgq4_variant2_ooblayout_free(struct mtd_info *mtd, int section,
- struct mtd_oob_region *region)
- {
- if (section)
-@@ -108,6 +127,11 @@ static int gd5fxgq4uexxg_ooblayout_free(
- return 0;
- }
-
-+static const struct mtd_ooblayout_ops gd5fxgq4_variant2_ooblayout = {
-+ .ecc = gd5fxgq4_variant2_ooblayout_ecc,
-+ .free = gd5fxgq4_variant2_ooblayout_free,
-+};
-+
- static int gd5fxgq4uexxg_ecc_get_status(struct spinand_device *spinand,
- u8 status)
- {
-@@ -150,15 +174,25 @@ static int gd5fxgq4uexxg_ecc_get_status(
- return -EINVAL;
- }
-
--static const struct mtd_ooblayout_ops gd5fxgq4xa_ooblayout = {
-- .ecc = gd5fxgq4xa_ooblayout_ecc,
-- .free = gd5fxgq4xa_ooblayout_free,
--};
-+static int gd5fxgq4ufxxg_ecc_get_status(struct spinand_device *spinand,
-+ u8 status)
-+{
-+ switch (status & GD5FXGQ4UXFXXG_STATUS_ECC_MASK) {
-+ case GD5FXGQ4UXFXXG_STATUS_ECC_NO_BITFLIPS:
-+ return 0;
-
--static const struct mtd_ooblayout_ops gd5fxgq4uexxg_ooblayout = {
-- .ecc = gd5fxgq4uexxg_ooblayout_ecc,
-- .free = gd5fxgq4uexxg_ooblayout_free,
--};
-+ case GD5FXGQ4UXFXXG_STATUS_ECC_1_3_BITFLIPS:
-+ return 3;
-+
-+ case GD5FXGQ4UXFXXG_STATUS_ECC_UNCOR_ERROR:
-+ return -EBADMSG;
-+
-+ default: /* (2 << 4) through (6 << 4) are 4-8 corrected errors */
-+ return ((status & GD5FXGQ4UXFXXG_STATUS_ECC_MASK) >> 4) + 2;
-+ }
-+
-+ return -EINVAL;
-+}
-
- static const struct spinand_info gigadevice_spinand_table[] = {
- SPINAND_INFO("GD5F1GQ4xA", 0xF1,
-@@ -195,25 +229,40 @@ static const struct spinand_info gigadev
- &write_cache_variants,
- &update_cache_variants),
- 0,
-- SPINAND_ECCINFO(&gd5fxgq4uexxg_ooblayout,
-+ SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout,
- gd5fxgq4uexxg_ecc_get_status)),
-+ SPINAND_INFO("GD5F1GQ4UFxxG", 0xb148,
-+ NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1),
-+ NAND_ECCREQ(8, 512),
-+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants_f,
-+ &write_cache_variants,
-+ &update_cache_variants),
-+ 0,
-+ SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout,
-+ gd5fxgq4ufxxg_ecc_get_status)),
- };
-
- static int gigadevice_spinand_detect(struct spinand_device *spinand)
- {
- u8 *id = spinand->id.data;
-+ u16 did;
- int ret;
-
- /*
-- * For GD NANDs, There is an address byte needed to shift in before IDs
-- * are read out, so the first byte in raw_id is dummy.
-+ * Earlier GDF5-series devices (A,E) return [0][MID][DID]
-+ * Later (F) devices return [MID][DID1][DID2]
- */
-- if (id[1] != SPINAND_MFR_GIGADEVICE)
-+
-+ if (id[0] == SPINAND_MFR_GIGADEVICE)
-+ did = (id[1] << 8) + id[2];
-+ else if (id[0] == 0 && id[1] == SPINAND_MFR_GIGADEVICE)
-+ did = id[2];
-+ else
- return 0;
-
- ret = spinand_match_and_init(spinand, gigadevice_spinand_table,
- ARRAY_SIZE(gigadevice_spinand_table),
-- id[2]);
-+ did);
- if (ret)
- return ret;
-
+++ /dev/null
-From 3552691616c940a7c4125c2678ba816653cd725e Mon Sep 17 00:00:00 2001
-From: Jeff Kletsky <git-commits@allycomm.com>
-Date: Tue, 18 Jun 2019 10:08:05 -0700
-Subject: [PATCH] mtd: spinand: Add initial support for Paragon PN26G0xA
-
-Add initial support for Paragon Technology
-PN26G01Axxxxx and PN26G02Axxxxx SPI NAND
-
-Datasheets available at
-http://www.xtxtech.com/upfile/2016082517274590.pdf
-http://www.xtxtech.com/upfile/2016082517282329.pdf
-
-Signed-off-by: Jeff Kletsky <git-commits@allycomm.com>
-Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-
-ADOPTED FROM UPSTREAM due to upstream commit 377e517b5fa5 in Linux 5.2
- which added another parameter to NAND_MEMORG
----
- drivers/mtd/nand/spi/Makefile | 2 +-
- drivers/mtd/nand/spi/core.c | 1 +
- drivers/mtd/nand/spi/paragon.c | 147 +++++++++++++++++++++++++++++++++
- include/linux/mtd/spinand.h | 1 +
- 4 files changed, 150 insertions(+), 1 deletion(-)
- create mode 100644 drivers/mtd/nand/spi/paragon.c
-
---- a/drivers/mtd/nand/spi/Makefile
-+++ b/drivers/mtd/nand/spi/Makefile
-@@ -1,3 +1,3 @@
- # SPDX-License-Identifier: GPL-2.0
--spinand-objs := core.o gigadevice.o macronix.o micron.o toshiba.o winbond.o
-+spinand-objs := core.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o
- obj-$(CONFIG_MTD_SPI_NAND) += spinand.o
---- a/drivers/mtd/nand/spi/core.c
-+++ b/drivers/mtd/nand/spi/core.c
-@@ -763,6 +763,7 @@ static const struct spinand_manufacturer
- &gigadevice_spinand_manufacturer,
- ¯onix_spinand_manufacturer,
- µn_spinand_manufacturer,
-+ ¶gon_spinand_manufacturer,
- &toshiba_spinand_manufacturer,
- &winbond_spinand_manufacturer,
- };
---- /dev/null
-+++ b/drivers/mtd/nand/spi/paragon.c
-@@ -0,0 +1,147 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (C) 2019 Jeff Kletsky
-+ *
-+ * Author: Jeff Kletsky <git-commits@allycomm.com>
-+ */
-+
-+#include <linux/device.h>
-+#include <linux/kernel.h>
-+#include <linux/mtd/spinand.h>
-+
-+
-+#define SPINAND_MFR_PARAGON 0xa1
-+
-+
-+#define PN26G0XA_STATUS_ECC_BITMASK (3 << 4)
-+
-+#define PN26G0XA_STATUS_ECC_NONE_DETECTED (0 << 4)
-+#define PN26G0XA_STATUS_ECC_1_7_CORRECTED (1 << 4)
-+#define PN26G0XA_STATUS_ECC_ERRORED (2 << 4)
-+#define PN26G0XA_STATUS_ECC_8_CORRECTED (3 << 4)
-+
-+
-+static SPINAND_OP_VARIANTS(read_cache_variants,
-+ SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
-+ SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
-+ SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
-+ SPINAND_PAGE_READ_FROM_CACHE_X2_OP(0, 1, NULL, 0),
-+ SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
-+ SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
-+
-+static SPINAND_OP_VARIANTS(write_cache_variants,
-+ SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
-+ SPINAND_PROG_LOAD(true, 0, NULL, 0));
-+
-+static SPINAND_OP_VARIANTS(update_cache_variants,
-+ SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
-+ SPINAND_PROG_LOAD(false, 0, NULL, 0));
-+
-+
-+static int pn26g0xa_ooblayout_ecc(struct mtd_info *mtd, int section,
-+ struct mtd_oob_region *region)
-+{
-+ if (section > 3)
-+ return -ERANGE;
-+
-+ region->offset = 6 + (15 * section); /* 4 BBM + 2 user bytes */
-+ region->length = 13;
-+
-+ return 0;
-+}
-+
-+static int pn26g0xa_ooblayout_free(struct mtd_info *mtd, int section,
-+ struct mtd_oob_region *region)
-+{
-+ if (section > 4)
-+ return -ERANGE;
-+
-+ if (section == 4) {
-+ region->offset = 64;
-+ region->length = 64;
-+ } else {
-+ region->offset = 4 + (15 * section);
-+ region->length = 2;
-+ }
-+
-+ return 0;
-+}
-+
-+static int pn26g0xa_ecc_get_status(struct spinand_device *spinand,
-+ u8 status)
-+{
-+ switch (status & PN26G0XA_STATUS_ECC_BITMASK) {
-+ case PN26G0XA_STATUS_ECC_NONE_DETECTED:
-+ return 0;
-+
-+ case PN26G0XA_STATUS_ECC_1_7_CORRECTED:
-+ return 7; /* Return upper limit by convention */
-+
-+ case PN26G0XA_STATUS_ECC_8_CORRECTED:
-+ return 8;
-+
-+ case PN26G0XA_STATUS_ECC_ERRORED:
-+ return -EBADMSG;
-+
-+ default:
-+ break;
-+ }
-+
-+ return -EINVAL;
-+}
-+
-+static const struct mtd_ooblayout_ops pn26g0xa_ooblayout = {
-+ .ecc = pn26g0xa_ooblayout_ecc,
-+ .free = pn26g0xa_ooblayout_free,
-+};
-+
-+
-+static const struct spinand_info paragon_spinand_table[] = {
-+ SPINAND_INFO("PN26G01A", 0xe1,
-+ NAND_MEMORG(1, 2048, 128, 64, 1024, 1, 1, 1),
-+ NAND_ECCREQ(8, 512),
-+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
-+ &write_cache_variants,
-+ &update_cache_variants),
-+ 0,
-+ SPINAND_ECCINFO(&pn26g0xa_ooblayout,
-+ pn26g0xa_ecc_get_status)),
-+ SPINAND_INFO("PN26G02A", 0xe2,
-+ NAND_MEMORG(1, 2048, 128, 64, 2048, 1, 1, 1),
-+ NAND_ECCREQ(8, 512),
-+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
-+ &write_cache_variants,
-+ &update_cache_variants),
-+ 0,
-+ SPINAND_ECCINFO(&pn26g0xa_ooblayout,
-+ pn26g0xa_ecc_get_status)),
-+};
-+
-+static int paragon_spinand_detect(struct spinand_device *spinand)
-+{
-+ u8 *id = spinand->id.data;
-+ int ret;
-+
-+ /* Read ID returns [0][MID][DID] */
-+
-+ if (id[1] != SPINAND_MFR_PARAGON)
-+ return 0;
-+
-+ ret = spinand_match_and_init(spinand, paragon_spinand_table,
-+ ARRAY_SIZE(paragon_spinand_table),
-+ id[2]);
-+ if (ret)
-+ return ret;
-+
-+ return 1;
-+}
-+
-+static const struct spinand_manufacturer_ops paragon_spinand_manuf_ops = {
-+ .detect = paragon_spinand_detect,
-+};
-+
-+const struct spinand_manufacturer paragon_spinand_manufacturer = {
-+ .id = SPINAND_MFR_PARAGON,
-+ .name = "Paragon",
-+ .ops = ¶gon_spinand_manuf_ops,
-+};
---- a/include/linux/mtd/spinand.h
-+++ b/include/linux/mtd/spinand.h
-@@ -227,6 +227,7 @@ struct spinand_manufacturer {
- extern const struct spinand_manufacturer gigadevice_spinand_manufacturer;
- extern const struct spinand_manufacturer macronix_spinand_manufacturer;
- extern const struct spinand_manufacturer micron_spinand_manufacturer;
-+extern const struct spinand_manufacturer paragon_spinand_manufacturer;
- extern const struct spinand_manufacturer toshiba_spinand_manufacturer;
- extern const struct spinand_manufacturer winbond_spinand_manufacturer;
-
+++ /dev/null
-From 10050a02f7d508fa88f70fcfceefbacd13488ca7 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Mon, 23 Dec 2019 17:05:49 +0200
-Subject: [PATCH] mtd: spi-nor: Add 4B_OPCODES flag to w25q256
-
-The w25q256 supports 4-byte opcodes so lets add the flag.
-Tested on OpenWrt under 4.19.82 kernel on 8devices Habanero.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
----
- drivers/mtd/spi-nor/spi-nor.c | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1244,7 +1244,9 @@ static const struct flash_info spi_nor_i
- { "w25q80", INFO(0xef5014, 0, 64 * 1024, 16, SECT_4K) },
- { "w25q80bl", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) },
- { "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
-- { "w25q256", INFO(0xef4019, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-+ { "w25q256", INFO(0xef4019, 0, 64 * 1024, 512,
-+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-+ SPI_NOR_4B_OPCODES) },
- { "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 1024,
- SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_DUAL_READ) },
-
+++ /dev/null
-From 17abc9ec68b73ddeb262a507a62421016b9c54d5 Mon Sep 17 00:00:00 2001
-From: Tomasz Duszynski <tduszyns@gmail.com>
-Date: Fri, 14 Dec 2018 19:28:01 +0100
-Subject: [PATCH] iio: add IIO_MASSCONCENTRATION channel type
-
-Measuring particulate matter in ug / m3 (micro-grams per cubic meter)
-is de facto standard. Existing air quality sensors usually follow
-this convention and are capable of returning measurements using
-this unit.
-
-IIO currently does not offer suitable channel type for this
-type of measurements hence this patch adds this.
-
-In addition, extra modifiers are introduced used for distinguishing
-between fine pm1, pm2p5 and coarse pm4, pm10 particle measurements, i.e
-IIO_MOD_PM1, IIO_MOD_PM25 and IIO_MOD_PM4, IIO_MOD_PM10.
-
-pmX consists of particles with aerodynamic diameter less or equal to
-X micrometers.
-
-Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
-Acked-by: Matt Ranostay <matt.ranostay@konsulko.com>
-Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
----
- Documentation/ABI/testing/sysfs-bus-iio | 17 ++++++++++++++++-
- drivers/iio/industrialio-core.c | 5 +++++
- include/uapi/linux/iio/types.h | 5 +++++
- tools/iio/iio_event_monitor.c | 10 ++++++++++
- 4 files changed, 36 insertions(+), 1 deletion(-)
-
---- a/Documentation/ABI/testing/sysfs-bus-iio
-+++ b/Documentation/ABI/testing/sysfs-bus-iio
-@@ -1684,4 +1684,19 @@ KernelVersion: 4.18
- Contact: linux-iio@vger.kernel.org
- Description:
- Raw (unscaled) phase difference reading from channel Y
-- that can be processed to radians.
-\ No newline at end of file
-+ that can be processed to radians.
-+
-+What: /sys/bus/iio/devices/iio:deviceX/in_massconcentration_pm1_input
-+What: /sys/bus/iio/devices/iio:deviceX/in_massconcentrationY_pm1_input
-+What: /sys/bus/iio/devices/iio:deviceX/in_massconcentration_pm2p5_input
-+What: /sys/bus/iio/devices/iio:deviceX/in_massconcentrationY_pm2p5_input
-+What: /sys/bus/iio/devices/iio:deviceX/in_massconcentration_pm4_input
-+What: /sys/bus/iio/devices/iio:deviceX/in_massconcentrationY_pm4_input
-+What: /sys/bus/iio/devices/iio:deviceX/in_massconcentration_pm10_input
-+What: /sys/bus/iio/devices/iio:deviceX/in_massconcentrationY_pm10_input
-+KernelVersion: 4.22
-+Contact: linux-iio@vger.kernel.org
-+Description:
-+ Mass concentration reading of particulate matter in ug / m3.
-+ pmX consists of particles with aerodynamic diameter less or
-+ equal to X micrometers.
---- a/drivers/iio/industrialio-core.c
-+++ b/drivers/iio/industrialio-core.c
-@@ -87,6 +87,7 @@ static const char * const iio_chan_type_
- [IIO_GRAVITY] = "gravity",
- [IIO_POSITIONRELATIVE] = "positionrelative",
- [IIO_PHASE] = "phase",
-+ [IIO_MASSCONCENTRATION] = "massconcentration",
- };
-
- static const char * const iio_modifier_names[] = {
-@@ -127,6 +128,10 @@ static const char * const iio_modifier_n
- [IIO_MOD_Q] = "q",
- [IIO_MOD_CO2] = "co2",
- [IIO_MOD_VOC] = "voc",
-+ [IIO_MOD_PM1] = "pm1",
-+ [IIO_MOD_PM2P5] = "pm2p5",
-+ [IIO_MOD_PM4] = "pm4",
-+ [IIO_MOD_PM10] = "pm10",
- };
-
- /* relies on pairs of these shared then separate */
---- a/include/uapi/linux/iio/types.h
-+++ b/include/uapi/linux/iio/types.h
-@@ -46,6 +46,7 @@ enum iio_chan_type {
- IIO_GRAVITY,
- IIO_POSITIONRELATIVE,
- IIO_PHASE,
-+ IIO_MASSCONCENTRATION,
- };
-
- enum iio_modifier {
-@@ -87,6 +88,10 @@ enum iio_modifier {
- IIO_MOD_VOC,
- IIO_MOD_LIGHT_UV,
- IIO_MOD_LIGHT_DUV,
-+ IIO_MOD_PM1,
-+ IIO_MOD_PM2P5,
-+ IIO_MOD_PM4,
-+ IIO_MOD_PM10,
- };
-
- enum iio_event_type {
---- a/tools/iio/iio_event_monitor.c
-+++ b/tools/iio/iio_event_monitor.c
-@@ -60,6 +60,7 @@ static const char * const iio_chan_type_
- [IIO_GRAVITY] = "gravity",
- [IIO_POSITIONRELATIVE] = "positionrelative",
- [IIO_PHASE] = "phase",
-+ [IIO_MASSCONCENTRATION] = "massconcentration",
- };
-
- static const char * const iio_ev_type_text[] = {
-@@ -115,6 +116,10 @@ static const char * const iio_modifier_n
- [IIO_MOD_Q] = "q",
- [IIO_MOD_CO2] = "co2",
- [IIO_MOD_VOC] = "voc",
-+ [IIO_MOD_PM1] = "pm1",
-+ [IIO_MOD_PM2P5] = "pm2p5",
-+ [IIO_MOD_PM4] = "pm4",
-+ [IIO_MOD_PM10] = "pm10",
- };
-
- static bool event_is_known(struct iio_event_data *event)
-@@ -156,6 +161,7 @@ static bool event_is_known(struct iio_ev
- case IIO_GRAVITY:
- case IIO_POSITIONRELATIVE:
- case IIO_PHASE:
-+ case IIO_MASSCONCENTRATION:
- break;
- default:
- return false;
-@@ -200,6 +206,10 @@ static bool event_is_known(struct iio_ev
- case IIO_MOD_Q:
- case IIO_MOD_CO2:
- case IIO_MOD_VOC:
-+ case IIO_MOD_PM1:
-+ case IIO_MOD_PM2P5:
-+ case IIO_MOD_PM4:
-+ case IIO_MOD_PM10:
- break;
- default:
- return false;
+++ /dev/null
-From 232e0f6ddeaee104d64675fe7d0cc142cf955f35 Mon Sep 17 00:00:00 2001
-From: Tomasz Duszynski <tduszyns@gmail.com>
-Date: Fri, 14 Dec 2018 19:28:02 +0100
-Subject: [PATCH] iio: chemical: add support for Sensirion SPS30 sensor
-
-Add support for Sensirion SPS30 particulate matter sensor.
-
-Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
-Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
----
- drivers/iio/chemical/Kconfig | 11 +
- drivers/iio/chemical/Makefile | 1 +
- drivers/iio/chemical/sps30.c | 407 ++++++++++++++++++++++++++++++++++
- 3 files changed, 419 insertions(+)
- create mode 100644 drivers/iio/chemical/sps30.c
-
---- a/drivers/iio/chemical/Kconfig
-+++ b/drivers/iio/chemical/Kconfig
-@@ -61,6 +61,17 @@ config IAQCORE
- iAQ-Core Continuous/Pulsed VOC (Volatile Organic Compounds)
- sensors
-
-+config SPS30
-+ tristate "SPS30 particulate matter sensor"
-+ depends on I2C
-+ select CRC8
-+ help
-+ Say Y here to build support for the Sensirion SPS30 particulate
-+ matter sensor.
-+
-+ To compile this driver as a module, choose M here: the module will
-+ be called sps30.
-+
- config VZ89X
- tristate "SGX Sensortech MiCS VZ89X VOC sensor"
- depends on I2C
---- a/drivers/iio/chemical/Makefile
-+++ b/drivers/iio/chemical/Makefile
-@@ -9,4 +9,5 @@ obj-$(CONFIG_BME680_I2C) += bme680_i2c.o
- obj-$(CONFIG_BME680_SPI) += bme680_spi.o
- obj-$(CONFIG_CCS811) += ccs811.o
- obj-$(CONFIG_IAQCORE) += ams-iaq-core.o
-+obj-$(CONFIG_SPS30) += sps30.o
- obj-$(CONFIG_VZ89X) += vz89x.o
---- /dev/null
-+++ b/drivers/iio/chemical/sps30.c
-@@ -0,0 +1,407 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Sensirion SPS30 particulate matter sensor driver
-+ *
-+ * Copyright (c) Tomasz Duszynski <tduszyns@gmail.com>
-+ *
-+ * I2C slave address: 0x69
-+ *
-+ * TODO:
-+ * - support for turning on fan cleaning
-+ * - support for reading/setting auto cleaning interval
-+ */
-+
-+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-+
-+#include <asm/unaligned.h>
-+#include <linux/crc8.h>
-+#include <linux/delay.h>
-+#include <linux/i2c.h>
-+#include <linux/iio/buffer.h>
-+#include <linux/iio/iio.h>
-+#include <linux/iio/sysfs.h>
-+#include <linux/iio/trigger_consumer.h>
-+#include <linux/iio/triggered_buffer.h>
-+#include <linux/module.h>
-+
-+#define SPS30_CRC8_POLYNOMIAL 0x31
-+/* max number of bytes needed to store PM measurements or serial string */
-+#define SPS30_MAX_READ_SIZE 48
-+/* sensor measures reliably up to 3000 ug / m3 */
-+#define SPS30_MAX_PM 3000
-+
-+/* SPS30 commands */
-+#define SPS30_START_MEAS 0x0010
-+#define SPS30_STOP_MEAS 0x0104
-+#define SPS30_RESET 0xd304
-+#define SPS30_READ_DATA_READY_FLAG 0x0202
-+#define SPS30_READ_DATA 0x0300
-+#define SPS30_READ_SERIAL 0xd033
-+
-+enum {
-+ PM1,
-+ PM2P5,
-+ PM4,
-+ PM10,
-+};
-+
-+struct sps30_state {
-+ struct i2c_client *client;
-+ /*
-+ * Guards against concurrent access to sensor registers.
-+ * Must be held whenever sequence of commands is to be executed.
-+ */
-+ struct mutex lock;
-+};
-+
-+DECLARE_CRC8_TABLE(sps30_crc8_table);
-+
-+static int sps30_write_then_read(struct sps30_state *state, u8 *txbuf,
-+ int txsize, u8 *rxbuf, int rxsize)
-+{
-+ int ret;
-+
-+ /*
-+ * Sensor does not support repeated start so instead of
-+ * sending two i2c messages in a row we just send one by one.
-+ */
-+ ret = i2c_master_send(state->client, txbuf, txsize);
-+ if (ret != txsize)
-+ return ret < 0 ? ret : -EIO;
-+
-+ if (!rxbuf)
-+ return 0;
-+
-+ ret = i2c_master_recv(state->client, rxbuf, rxsize);
-+ if (ret != rxsize)
-+ return ret < 0 ? ret : -EIO;
-+
-+ return 0;
-+}
-+
-+static int sps30_do_cmd(struct sps30_state *state, u16 cmd, u8 *data, int size)
-+{
-+ /*
-+ * Internally sensor stores measurements in a following manner:
-+ *
-+ * PM1: upper two bytes, crc8, lower two bytes, crc8
-+ * PM2P5: upper two bytes, crc8, lower two bytes, crc8
-+ * PM4: upper two bytes, crc8, lower two bytes, crc8
-+ * PM10: upper two bytes, crc8, lower two bytes, crc8
-+ *
-+ * What follows next are number concentration measurements and
-+ * typical particle size measurement which we omit.
-+ */
-+ u8 buf[SPS30_MAX_READ_SIZE] = { cmd >> 8, cmd };
-+ int i, ret = 0;
-+
-+ switch (cmd) {
-+ case SPS30_START_MEAS:
-+ buf[2] = 0x03;
-+ buf[3] = 0x00;
-+ buf[4] = crc8(sps30_crc8_table, &buf[2], 2, CRC8_INIT_VALUE);
-+ ret = sps30_write_then_read(state, buf, 5, NULL, 0);
-+ break;
-+ case SPS30_STOP_MEAS:
-+ case SPS30_RESET:
-+ ret = sps30_write_then_read(state, buf, 2, NULL, 0);
-+ break;
-+ case SPS30_READ_DATA_READY_FLAG:
-+ case SPS30_READ_DATA:
-+ case SPS30_READ_SERIAL:
-+ /* every two data bytes are checksummed */
-+ size += size / 2;
-+ ret = sps30_write_then_read(state, buf, 2, buf, size);
-+ break;
-+ }
-+
-+ if (ret)
-+ return ret;
-+
-+ /* validate received data and strip off crc bytes */
-+ for (i = 0; i < size; i += 3) {
-+ u8 crc = crc8(sps30_crc8_table, &buf[i], 2, CRC8_INIT_VALUE);
-+
-+ if (crc != buf[i + 2]) {
-+ dev_err(&state->client->dev,
-+ "data integrity check failed\n");
-+ return -EIO;
-+ }
-+
-+ *data++ = buf[i];
-+ *data++ = buf[i + 1];
-+ }
-+
-+ return 0;
-+}
-+
-+static s32 sps30_float_to_int_clamped(const u8 *fp)
-+{
-+ int val = get_unaligned_be32(fp);
-+ int mantissa = val & GENMASK(22, 0);
-+ /* this is fine since passed float is always non-negative */
-+ int exp = val >> 23;
-+ int fraction, shift;
-+
-+ /* special case 0 */
-+ if (!exp && !mantissa)
-+ return 0;
-+
-+ exp -= 127;
-+ if (exp < 0) {
-+ /* return values ranging from 1 to 99 */
-+ return ((((1 << 23) + mantissa) * 100) >> 23) >> (-exp);
-+ }
-+
-+ /* return values ranging from 100 to 300000 */
-+ shift = 23 - exp;
-+ val = (1 << exp) + (mantissa >> shift);
-+ if (val >= SPS30_MAX_PM)
-+ return SPS30_MAX_PM * 100;
-+
-+ fraction = mantissa & GENMASK(shift - 1, 0);
-+
-+ return val * 100 + ((fraction * 100) >> shift);
-+}
-+
-+static int sps30_do_meas(struct sps30_state *state, s32 *data, int size)
-+{
-+ int i, ret, tries = 5;
-+ u8 tmp[16];
-+
-+ while (tries--) {
-+ ret = sps30_do_cmd(state, SPS30_READ_DATA_READY_FLAG, tmp, 2);
-+ if (ret)
-+ return -EIO;
-+
-+ /* new measurements ready to be read */
-+ if (tmp[1] == 1)
-+ break;
-+
-+ msleep_interruptible(300);
-+ }
-+
-+ if (!tries)
-+ return -ETIMEDOUT;
-+
-+ ret = sps30_do_cmd(state, SPS30_READ_DATA, tmp, sizeof(int) * size);
-+ if (ret)
-+ return ret;
-+
-+ for (i = 0; i < size; i++)
-+ data[i] = sps30_float_to_int_clamped(&tmp[4 * i]);
-+
-+ return 0;
-+}
-+
-+static irqreturn_t sps30_trigger_handler(int irq, void *p)
-+{
-+ struct iio_poll_func *pf = p;
-+ struct iio_dev *indio_dev = pf->indio_dev;
-+ struct sps30_state *state = iio_priv(indio_dev);
-+ int ret;
-+ s32 data[4 + 2]; /* PM1, PM2P5, PM4, PM10, timestamp */
-+
-+ mutex_lock(&state->lock);
-+ ret = sps30_do_meas(state, data, 4);
-+ mutex_unlock(&state->lock);
-+ if (ret)
-+ goto err;
-+
-+ iio_push_to_buffers_with_timestamp(indio_dev, data,
-+ iio_get_time_ns(indio_dev));
-+err:
-+ iio_trigger_notify_done(indio_dev->trig);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int sps30_read_raw(struct iio_dev *indio_dev,
-+ struct iio_chan_spec const *chan,
-+ int *val, int *val2, long mask)
-+{
-+ struct sps30_state *state = iio_priv(indio_dev);
-+ int data[4], ret = -EINVAL;
-+
-+ switch (mask) {
-+ case IIO_CHAN_INFO_PROCESSED:
-+ switch (chan->type) {
-+ case IIO_MASSCONCENTRATION:
-+ mutex_lock(&state->lock);
-+ /* read up to the number of bytes actually needed */
-+ switch (chan->channel2) {
-+ case IIO_MOD_PM1:
-+ ret = sps30_do_meas(state, data, 1);
-+ break;
-+ case IIO_MOD_PM2P5:
-+ ret = sps30_do_meas(state, data, 2);
-+ break;
-+ case IIO_MOD_PM4:
-+ ret = sps30_do_meas(state, data, 3);
-+ break;
-+ case IIO_MOD_PM10:
-+ ret = sps30_do_meas(state, data, 4);
-+ break;
-+ }
-+ mutex_unlock(&state->lock);
-+ if (ret)
-+ return ret;
-+
-+ *val = data[chan->address] / 100;
-+ *val2 = (data[chan->address] % 100) * 10000;
-+
-+ return IIO_VAL_INT_PLUS_MICRO;
-+ default:
-+ return -EINVAL;
-+ }
-+ case IIO_CHAN_INFO_SCALE:
-+ switch (chan->type) {
-+ case IIO_MASSCONCENTRATION:
-+ switch (chan->channel2) {
-+ case IIO_MOD_PM1:
-+ case IIO_MOD_PM2P5:
-+ case IIO_MOD_PM4:
-+ case IIO_MOD_PM10:
-+ *val = 0;
-+ *val2 = 10000;
-+
-+ return IIO_VAL_INT_PLUS_MICRO;
-+ }
-+ default:
-+ return -EINVAL;
-+ }
-+ }
-+
-+ return -EINVAL;
-+}
-+
-+static const struct iio_info sps30_info = {
-+ .read_raw = sps30_read_raw,
-+};
-+
-+#define SPS30_CHAN(_index, _mod) { \
-+ .type = IIO_MASSCONCENTRATION, \
-+ .modified = 1, \
-+ .channel2 = IIO_MOD_ ## _mod, \
-+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \
-+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
-+ .address = _mod, \
-+ .scan_index = _index, \
-+ .scan_type = { \
-+ .sign = 'u', \
-+ .realbits = 19, \
-+ .storagebits = 32, \
-+ .endianness = IIO_CPU, \
-+ }, \
-+}
-+
-+static const struct iio_chan_spec sps30_channels[] = {
-+ SPS30_CHAN(0, PM1),
-+ SPS30_CHAN(1, PM2P5),
-+ SPS30_CHAN(2, PM4),
-+ SPS30_CHAN(3, PM10),
-+ IIO_CHAN_SOFT_TIMESTAMP(4),
-+};
-+
-+static void sps30_stop_meas(void *data)
-+{
-+ struct sps30_state *state = data;
-+
-+ sps30_do_cmd(state, SPS30_STOP_MEAS, NULL, 0);
-+}
-+
-+static const unsigned long sps30_scan_masks[] = { 0x0f, 0x00 };
-+
-+static int sps30_probe(struct i2c_client *client)
-+{
-+ struct iio_dev *indio_dev;
-+ struct sps30_state *state;
-+ u8 buf[32];
-+ int ret;
-+
-+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
-+ return -EOPNOTSUPP;
-+
-+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*state));
-+ if (!indio_dev)
-+ return -ENOMEM;
-+
-+ state = iio_priv(indio_dev);
-+ i2c_set_clientdata(client, indio_dev);
-+ state->client = client;
-+ indio_dev->dev.parent = &client->dev;
-+ indio_dev->info = &sps30_info;
-+ indio_dev->name = client->name;
-+ indio_dev->channels = sps30_channels;
-+ indio_dev->num_channels = ARRAY_SIZE(sps30_channels);
-+ indio_dev->modes = INDIO_DIRECT_MODE;
-+ indio_dev->available_scan_masks = sps30_scan_masks;
-+
-+ mutex_init(&state->lock);
-+ crc8_populate_msb(sps30_crc8_table, SPS30_CRC8_POLYNOMIAL);
-+
-+ ret = sps30_do_cmd(state, SPS30_RESET, NULL, 0);
-+ if (ret) {
-+ dev_err(&client->dev, "failed to reset device\n");
-+ return ret;
-+ }
-+ msleep(300);
-+ /*
-+ * Power-on-reset causes sensor to produce some glitch on i2c bus and
-+ * some controllers end up in error state. Recover simply by placing
-+ * some data on the bus, for example STOP_MEAS command, which
-+ * is NOP in this case.
-+ */
-+ sps30_do_cmd(state, SPS30_STOP_MEAS, NULL, 0);
-+
-+ ret = sps30_do_cmd(state, SPS30_READ_SERIAL, buf, sizeof(buf));
-+ if (ret) {
-+ dev_err(&client->dev, "failed to read serial number\n");
-+ return ret;
-+ }
-+ /* returned serial number is already NUL terminated */
-+ dev_info(&client->dev, "serial number: %s\n", buf);
-+
-+ ret = sps30_do_cmd(state, SPS30_START_MEAS, NULL, 0);
-+ if (ret) {
-+ dev_err(&client->dev, "failed to start measurement\n");
-+ return ret;
-+ }
-+
-+ ret = devm_add_action_or_reset(&client->dev, sps30_stop_meas, state);
-+ if (ret)
-+ return ret;
-+
-+ ret = devm_iio_triggered_buffer_setup(&client->dev, indio_dev, NULL,
-+ sps30_trigger_handler, NULL);
-+ if (ret)
-+ return ret;
-+
-+ return devm_iio_device_register(&client->dev, indio_dev);
-+}
-+
-+static const struct i2c_device_id sps30_id[] = {
-+ { "sps30" },
-+ { }
-+};
-+MODULE_DEVICE_TABLE(i2c, sps30_id);
-+
-+static const struct of_device_id sps30_of_match[] = {
-+ { .compatible = "sensirion,sps30" },
-+ { }
-+};
-+MODULE_DEVICE_TABLE(of, sps30_of_match);
-+
-+static struct i2c_driver sps30_driver = {
-+ .driver = {
-+ .name = "sps30",
-+ .of_match_table = sps30_of_match,
-+ },
-+ .id_table = sps30_id,
-+ .probe_new = sps30_probe,
-+};
-+module_i2c_driver(sps30_driver);
-+
-+MODULE_AUTHOR("Tomasz Duszynski <tduszyns@gmail.com>");
-+MODULE_DESCRIPTION("Sensirion SPS30 particulate matter sensor driver");
-+MODULE_LICENSE("GPL v2");
+++ /dev/null
-From c546d49656143855093c7b7fde60866e6e23a69d Mon Sep 17 00:00:00 2001
-From: Tomasz Duszynski <tduszyns@gmail.com>
-Date: Tue, 18 Dec 2018 21:28:09 +0100
-Subject: [PATCH] iio: chemical: sps30: add support for self cleaning
-
-Self cleaning is especially useful in cases where sensor undergoes
-frequent power on/off cycles. In such scenarios it is recommended to
-turn self cleaning at least once per week in order to maintain reliable
-measurements.
-
-Self cleaning is activated by writing 1 to a dedicated attribute.
-Internal fan accelerates to its maximum speed and keeps spinning
-for about 10 seconds blowing out accumulated dust.
-
-Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
-Tested-by: Andreas Brauchli <andreas.brauchli@sensirion.com>
-Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
----
- Documentation/ABI/testing/sysfs-bus-iio-sps30 | 8 +++++
- drivers/iio/chemical/sps30.c | 35 ++++++++++++++++++-
- 2 files changed, 42 insertions(+), 1 deletion(-)
- create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-sps30
-
---- /dev/null
-+++ b/Documentation/ABI/testing/sysfs-bus-iio-sps30
-@@ -0,0 +1,8 @@
-+What: /sys/bus/iio/devices/iio:deviceX/start_cleaning
-+Date: December 2018
-+KernelVersion: 4.22
-+Contact: linux-iio@vger.kernel.org
-+Description:
-+ Writing 1 starts sensor self cleaning. Internal fan accelerates
-+ to its maximum speed and keeps spinning for about 10 seconds in
-+ order to blow out accumulated dust.
---- a/drivers/iio/chemical/sps30.c
-+++ b/drivers/iio/chemical/sps30.c
-@@ -7,7 +7,6 @@
- * I2C slave address: 0x69
- *
- * TODO:
-- * - support for turning on fan cleaning
- * - support for reading/setting auto cleaning interval
- */
-
-@@ -37,6 +36,7 @@
- #define SPS30_READ_DATA_READY_FLAG 0x0202
- #define SPS30_READ_DATA 0x0300
- #define SPS30_READ_SERIAL 0xd033
-+#define SPS30_START_FAN_CLEANING 0x5607
-
- enum {
- PM1,
-@@ -104,6 +104,7 @@ static int sps30_do_cmd(struct sps30_sta
- break;
- case SPS30_STOP_MEAS:
- case SPS30_RESET:
-+ case SPS30_START_FAN_CLEANING:
- ret = sps30_write_then_read(state, buf, 2, NULL, 0);
- break;
- case SPS30_READ_DATA_READY_FLAG:
-@@ -275,7 +276,39 @@ static int sps30_read_raw(struct iio_dev
- return -EINVAL;
- }
-
-+static ssize_t start_cleaning_store(struct device *dev,
-+ struct device_attribute *attr,
-+ const char *buf, size_t len)
-+{
-+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-+ struct sps30_state *state = iio_priv(indio_dev);
-+ int val, ret;
-+
-+ if (kstrtoint(buf, 0, &val) || val != 1)
-+ return -EINVAL;
-+
-+ mutex_lock(&state->lock);
-+ ret = sps30_do_cmd(state, SPS30_START_FAN_CLEANING, NULL, 0);
-+ mutex_unlock(&state->lock);
-+ if (ret)
-+ return ret;
-+
-+ return len;
-+}
-+
-+static IIO_DEVICE_ATTR_WO(start_cleaning, 0);
-+
-+static struct attribute *sps30_attrs[] = {
-+ &iio_dev_attr_start_cleaning.dev_attr.attr,
-+ NULL
-+};
-+
-+static const struct attribute_group sps30_attr_group = {
-+ .attrs = sps30_attrs,
-+};
-+
- static const struct iio_info sps30_info = {
-+ .attrs = &sps30_attr_group,
- .read_raw = sps30_read_raw,
- };
-
+++ /dev/null
-From 62129a0849d27cc94ced832bcf9dcde283dcbe08 Mon Sep 17 00:00:00 2001
-From: Tomasz Duszynski <tduszyns@gmail.com>
-Date: Tue, 15 Jan 2019 20:00:06 +0100
-Subject: [PATCH] iio: chemical: sps30: allow changing self cleaning period
-
-Sensor can periodically trigger self cleaning. Period can be changed by
-writing a new value to a dedicated attribute. Upon attribute read
-current period gets returned.
-
-Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
-Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
----
- Documentation/ABI/testing/sysfs-bus-iio-sps30 | 20 +++
- drivers/iio/chemical/sps30.c | 143 +++++++++++++++---
- 2 files changed, 145 insertions(+), 18 deletions(-)
-
---- a/Documentation/ABI/testing/sysfs-bus-iio-sps30
-+++ b/Documentation/ABI/testing/sysfs-bus-iio-sps30
-@@ -6,3 +6,23 @@ Description:
- Writing 1 starts sensor self cleaning. Internal fan accelerates
- to its maximum speed and keeps spinning for about 10 seconds in
- order to blow out accumulated dust.
-+
-+What: /sys/bus/iio/devices/iio:deviceX/cleaning_period
-+Date: January 2019
-+KernelVersion: 5.1
-+Contact: linux-iio@vger.kernel.org
-+Description:
-+ Sensor is capable of triggering self cleaning periodically.
-+ Period can be changed by writing a new value here. Upon reading
-+ the current one is returned. Units are seconds.
-+
-+ Writing 0 disables periodical self cleaning entirely.
-+
-+What: /sys/bus/iio/devices/iio:deviceX/cleaning_period_available
-+Date: January 2019
-+KernelVersion: 5.1
-+Contact: linux-iio@vger.kernel.org
-+Description:
-+ The range of available values in seconds represented as the
-+ minimum value, the step and the maximum value, all enclosed in
-+ square brackets.
---- a/drivers/iio/chemical/sps30.c
-+++ b/drivers/iio/chemical/sps30.c
-@@ -5,9 +5,6 @@
- * Copyright (c) Tomasz Duszynski <tduszyns@gmail.com>
- *
- * I2C slave address: 0x69
-- *
-- * TODO:
-- * - support for reading/setting auto cleaning interval
- */
-
- #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-@@ -21,6 +18,7 @@
- #include <linux/iio/sysfs.h>
- #include <linux/iio/trigger_consumer.h>
- #include <linux/iio/triggered_buffer.h>
-+#include <linux/kernel.h>
- #include <linux/module.h>
-
- #define SPS30_CRC8_POLYNOMIAL 0x31
-@@ -28,6 +26,9 @@
- #define SPS30_MAX_READ_SIZE 48
- /* sensor measures reliably up to 3000 ug / m3 */
- #define SPS30_MAX_PM 3000
-+/* minimum and maximum self cleaning periods in seconds */
-+#define SPS30_AUTO_CLEANING_PERIOD_MIN 0
-+#define SPS30_AUTO_CLEANING_PERIOD_MAX 604800
-
- /* SPS30 commands */
- #define SPS30_START_MEAS 0x0010
-@@ -37,6 +38,9 @@
- #define SPS30_READ_DATA 0x0300
- #define SPS30_READ_SERIAL 0xd033
- #define SPS30_START_FAN_CLEANING 0x5607
-+#define SPS30_AUTO_CLEANING_PERIOD 0x8004
-+/* not a sensor command per se, used only to distinguish write from read */
-+#define SPS30_READ_AUTO_CLEANING_PERIOD 0x8005
-
- enum {
- PM1,
-@@ -45,6 +49,11 @@ enum {
- PM10,
- };
-
-+enum {
-+ RESET,
-+ MEASURING,
-+};
-+
- struct sps30_state {
- struct i2c_client *client;
- /*
-@@ -52,6 +61,7 @@ struct sps30_state {
- * Must be held whenever sequence of commands is to be executed.
- */
- struct mutex lock;
-+ int state;
- };
-
- DECLARE_CRC8_TABLE(sps30_crc8_table);
-@@ -107,6 +117,9 @@ static int sps30_do_cmd(struct sps30_sta
- case SPS30_START_FAN_CLEANING:
- ret = sps30_write_then_read(state, buf, 2, NULL, 0);
- break;
-+ case SPS30_READ_AUTO_CLEANING_PERIOD:
-+ buf[0] = SPS30_AUTO_CLEANING_PERIOD >> 8;
-+ buf[1] = (u8)SPS30_AUTO_CLEANING_PERIOD;
- case SPS30_READ_DATA_READY_FLAG:
- case SPS30_READ_DATA:
- case SPS30_READ_SERIAL:
-@@ -114,6 +127,15 @@ static int sps30_do_cmd(struct sps30_sta
- size += size / 2;
- ret = sps30_write_then_read(state, buf, 2, buf, size);
- break;
-+ case SPS30_AUTO_CLEANING_PERIOD:
-+ buf[2] = data[0];
-+ buf[3] = data[1];
-+ buf[4] = crc8(sps30_crc8_table, &buf[2], 2, CRC8_INIT_VALUE);
-+ buf[5] = data[2];
-+ buf[6] = data[3];
-+ buf[7] = crc8(sps30_crc8_table, &buf[5], 2, CRC8_INIT_VALUE);
-+ ret = sps30_write_then_read(state, buf, 8, NULL, 0);
-+ break;
- }
-
- if (ret)
-@@ -170,6 +192,14 @@ static int sps30_do_meas(struct sps30_st
- int i, ret, tries = 5;
- u8 tmp[16];
-
-+ if (state->state == RESET) {
-+ ret = sps30_do_cmd(state, SPS30_START_MEAS, NULL, 0);
-+ if (ret)
-+ return ret;
-+
-+ state->state = MEASURING;
-+ }
-+
- while (tries--) {
- ret = sps30_do_cmd(state, SPS30_READ_DATA_READY_FLAG, tmp, 2);
- if (ret)
-@@ -276,6 +306,24 @@ static int sps30_read_raw(struct iio_dev
- return -EINVAL;
- }
-
-+static int sps30_do_cmd_reset(struct sps30_state *state)
-+{
-+ int ret;
-+
-+ ret = sps30_do_cmd(state, SPS30_RESET, NULL, 0);
-+ msleep(300);
-+ /*
-+ * Power-on-reset causes sensor to produce some glitch on i2c bus and
-+ * some controllers end up in error state. Recover simply by placing
-+ * some data on the bus, for example STOP_MEAS command, which
-+ * is NOP in this case.
-+ */
-+ sps30_do_cmd(state, SPS30_STOP_MEAS, NULL, 0);
-+ state->state = RESET;
-+
-+ return ret;
-+}
-+
- static ssize_t start_cleaning_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t len)
-@@ -296,10 +344,82 @@ static ssize_t start_cleaning_store(stru
- return len;
- }
-
-+static ssize_t cleaning_period_show(struct device *dev,
-+ struct device_attribute *attr,
-+ char *buf)
-+{
-+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-+ struct sps30_state *state = iio_priv(indio_dev);
-+ u8 tmp[4];
-+ int ret;
-+
-+ mutex_lock(&state->lock);
-+ ret = sps30_do_cmd(state, SPS30_READ_AUTO_CLEANING_PERIOD, tmp, 4);
-+ mutex_unlock(&state->lock);
-+ if (ret)
-+ return ret;
-+
-+ return sprintf(buf, "%d\n", get_unaligned_be32(tmp));
-+}
-+
-+static ssize_t cleaning_period_store(struct device *dev,
-+ struct device_attribute *attr,
-+ const char *buf, size_t len)
-+{
-+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
-+ struct sps30_state *state = iio_priv(indio_dev);
-+ int val, ret;
-+ u8 tmp[4];
-+
-+ if (kstrtoint(buf, 0, &val))
-+ return -EINVAL;
-+
-+ if ((val < SPS30_AUTO_CLEANING_PERIOD_MIN) ||
-+ (val > SPS30_AUTO_CLEANING_PERIOD_MAX))
-+ return -EINVAL;
-+
-+ put_unaligned_be32(val, tmp);
-+
-+ mutex_lock(&state->lock);
-+ ret = sps30_do_cmd(state, SPS30_AUTO_CLEANING_PERIOD, tmp, 0);
-+ if (ret) {
-+ mutex_unlock(&state->lock);
-+ return ret;
-+ }
-+
-+ msleep(20);
-+
-+ /*
-+ * sensor requires reset in order to return up to date self cleaning
-+ * period
-+ */
-+ ret = sps30_do_cmd_reset(state);
-+ if (ret)
-+ dev_warn(dev,
-+ "period changed but reads will return the old value\n");
-+
-+ mutex_unlock(&state->lock);
-+
-+ return len;
-+}
-+
-+static ssize_t cleaning_period_available_show(struct device *dev,
-+ struct device_attribute *attr,
-+ char *buf)
-+{
-+ return snprintf(buf, PAGE_SIZE, "[%d %d %d]\n",
-+ SPS30_AUTO_CLEANING_PERIOD_MIN, 1,
-+ SPS30_AUTO_CLEANING_PERIOD_MAX);
-+}
-+
- static IIO_DEVICE_ATTR_WO(start_cleaning, 0);
-+static IIO_DEVICE_ATTR_RW(cleaning_period, 0);
-+static IIO_DEVICE_ATTR_RO(cleaning_period_available, 0);
-
- static struct attribute *sps30_attrs[] = {
- &iio_dev_attr_start_cleaning.dev_attr.attr,
-+ &iio_dev_attr_cleaning_period.dev_attr.attr,
-+ &iio_dev_attr_cleaning_period_available.dev_attr.attr,
- NULL
- };
-
-@@ -362,6 +482,7 @@ static int sps30_probe(struct i2c_client
- state = iio_priv(indio_dev);
- i2c_set_clientdata(client, indio_dev);
- state->client = client;
-+ state->state = RESET;
- indio_dev->dev.parent = &client->dev;
- indio_dev->info = &sps30_info;
- indio_dev->name = client->name;
-@@ -373,19 +494,11 @@ static int sps30_probe(struct i2c_client
- mutex_init(&state->lock);
- crc8_populate_msb(sps30_crc8_table, SPS30_CRC8_POLYNOMIAL);
-
-- ret = sps30_do_cmd(state, SPS30_RESET, NULL, 0);
-+ ret = sps30_do_cmd_reset(state);
- if (ret) {
- dev_err(&client->dev, "failed to reset device\n");
- return ret;
- }
-- msleep(300);
-- /*
-- * Power-on-reset causes sensor to produce some glitch on i2c bus and
-- * some controllers end up in error state. Recover simply by placing
-- * some data on the bus, for example STOP_MEAS command, which
-- * is NOP in this case.
-- */
-- sps30_do_cmd(state, SPS30_STOP_MEAS, NULL, 0);
-
- ret = sps30_do_cmd(state, SPS30_READ_SERIAL, buf, sizeof(buf));
- if (ret) {
-@@ -395,12 +508,6 @@ static int sps30_probe(struct i2c_client
- /* returned serial number is already NUL terminated */
- dev_info(&client->dev, "serial number: %s\n", buf);
-
-- ret = sps30_do_cmd(state, SPS30_START_MEAS, NULL, 0);
-- if (ret) {
-- dev_err(&client->dev, "failed to start measurement\n");
-- return ret;
-- }
--
- ret = devm_add_action_or_reset(&client->dev, sps30_stop_meas, state);
- if (ret)
- return ret;
+++ /dev/null
-From 3fa30bf7004bb8069826ef85487f4753666a73da Mon Sep 17 00:00:00 2001
-From: Tomasz Duszynski <tduszyns@gmail.com>
-Date: Sat, 2 Feb 2019 10:00:03 +0100
-Subject: [PATCH] iio: chemical: sps30: remove printk format specifier
-
-pr_fmt is used by printk wrappers. There are not any in the driver
-code so remove the format specifier.
-
-Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
-Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
----
- drivers/iio/chemical/sps30.c | 2 --
- 1 file changed, 2 deletions(-)
-
---- a/drivers/iio/chemical/sps30.c
-+++ b/drivers/iio/chemical/sps30.c
-@@ -7,8 +7,6 @@
- * I2C slave address: 0x69
- */
-
--#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
--
- #include <asm/unaligned.h>
- #include <linux/crc8.h>
- #include <linux/delay.h>
+++ /dev/null
-From 905889b4a34c753a538015f0b2cdaa0c9e3a4fd5 Mon Sep 17 00:00:00 2001
-From: Dan Carpenter <dan.carpenter@oracle.com>
-Date: Sat, 9 Feb 2019 12:03:52 +0300
-Subject: [PATCH] iio: chemical: sps30: fix a loop timeout test
-
-The "while (tries--) {" loop is a postop so it exits with "tries" set
-to -1.
-
-Fixes: 232e0f6ddeae ("iio: chemical: add support for Sensirion SPS30 sensor")
-Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
-Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
----
- drivers/iio/chemical/sps30.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/iio/chemical/sps30.c
-+++ b/drivers/iio/chemical/sps30.c
-@@ -210,7 +210,7 @@ static int sps30_do_meas(struct sps30_st
- msleep_interruptible(300);
- }
-
-- if (!tries)
-+ if (tries == -1)
- return -ETIMEDOUT;
-
- ret = sps30_do_cmd(state, SPS30_READ_DATA, tmp, sizeof(int) * size);
+++ /dev/null
-From 59b9bb0abca9efe47207301dbaf0d1beee2bd0f7 Mon Sep 17 00:00:00 2001
-From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-Date: Sat, 9 Feb 2019 19:32:58 +0000
-Subject: [PATCH] iio:chemical:sps30 Supress some switch fallthrough warnings.
-
-Fixes warnings reported on linux-next but marking one path
-and adding an explicit return in the other.
-
-Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-Cc: Andreas Brauchli <a.brauchli@elementarea.net>
-Acked-by: Tomasz Duszynski <tduszyns@gmail.com>
----
- drivers/iio/chemical/sps30.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/iio/chemical/sps30.c
-+++ b/drivers/iio/chemical/sps30.c
-@@ -118,6 +118,7 @@ static int sps30_do_cmd(struct sps30_sta
- case SPS30_READ_AUTO_CLEANING_PERIOD:
- buf[0] = SPS30_AUTO_CLEANING_PERIOD >> 8;
- buf[1] = (u8)SPS30_AUTO_CLEANING_PERIOD;
-+ /* fall through */
- case SPS30_READ_DATA_READY_FLAG:
- case SPS30_READ_DATA:
- case SPS30_READ_SERIAL:
-@@ -295,6 +296,8 @@ static int sps30_read_raw(struct iio_dev
- *val2 = 10000;
-
- return IIO_VAL_INT_PLUS_MICRO;
-+ default:
-+ return -EINVAL;
- }
- default:
- return -EINVAL;
+++ /dev/null
-From 78b75ab3f8c9dfac563b81105a1b838ec37a940e Mon Sep 17 00:00:00 2001
-From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-Date: Sun, 13 Oct 2019 10:55:15 +0100
-Subject: [PATCH] iio: chemical: sps30: Explicity truncate constant by masking
-
-When breaking up a constant to write to two 8 bit registers
-it isn't obvious to sparse that it was intentional.
-
-CHECK drivers/iio/chemical/sps30.c
-drivers/iio/chemical/sps30.c:120:30: warning: cast truncates bits from constant value (8004 becomes 4)
-
-So in the interests of minimising noisy warnings, let us add
-a mask.
-
-Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-Acked-by: Tomasz Duszynski <tduszyns@gmail.com>
----
- drivers/iio/chemical/sps30.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/iio/chemical/sps30.c
-+++ b/drivers/iio/chemical/sps30.c
-@@ -117,7 +117,7 @@ static int sps30_do_cmd(struct sps30_sta
- break;
- case SPS30_READ_AUTO_CLEANING_PERIOD:
- buf[0] = SPS30_AUTO_CLEANING_PERIOD >> 8;
-- buf[1] = (u8)SPS30_AUTO_CLEANING_PERIOD;
-+ buf[1] = (u8)(SPS30_AUTO_CLEANING_PERIOD & 0xff);
- /* fall through */
- case SPS30_READ_DATA_READY_FLAG:
- case SPS30_READ_DATA:
+++ /dev/null
-From 61338e27e2eef3bfcd3df5c39cec5b9dc10ba25c Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Petr=20=C5=A0tetiar?= <ynezz@true.cz>
-Date: Sun, 23 Feb 2020 22:08:25 +0100
-Subject: [PATCH] iio: chemical: sps30: fix missing triggered buffer dependency
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-SPS30 uses triggered buffer, but the dependency is not specified in the
-Kconfig file. Fix this by selecting IIO_BUFFER and IIO_TRIGGERED_BUFFER
-config symbols.
-
-Cc: stable@vger.kernel.org
-Fixes: 232e0f6ddeae ("iio: chemical: add support for Sensirion SPS30 sensor")
-Signed-off-by: Petr Štetiar <ynezz@true.cz>
----
- drivers/iio/chemical/Kconfig | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/iio/chemical/Kconfig
-+++ b/drivers/iio/chemical/Kconfig
-@@ -65,6 +65,8 @@ config SPS30
- tristate "SPS30 particulate matter sensor"
- depends on I2C
- select CRC8
-+ select IIO_BUFFER
-+ select IIO_TRIGGERED_BUFFER
- help
- Say Y here to build support for the Sensirion SPS30 particulate
- matter sensor.
+++ /dev/null
-From 6f3ea4e5b1f0867ec217f6101fcb89783ed905d7 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Sat, 9 Feb 2019 18:23:26 +0000
-Subject: [PATCH] net: phylink: only call mac_config() during resolve
- when link is up
-
-There's little point calling mac_config() when the link is down.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/phylink.c | 11 +++++++++--
- 1 file changed, 9 insertions(+), 2 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -339,6 +339,13 @@ static void phylink_mac_config(struct ph
- pl->ops->mac_config(pl->netdev, pl->link_an_mode, state);
- }
-
-+static void phylink_mac_config_up(struct phylink *pl,
-+ const struct phylink_link_state *state)
-+{
-+ if (state->link)
-+ phylink_mac_config(pl, state);
-+}
-+
- static void phylink_mac_an_restart(struct phylink *pl)
- {
- if (pl->link_config.an_enabled &&
-@@ -442,12 +449,12 @@ static void phylink_resolve(struct work_
- case MLO_AN_PHY:
- link_state = pl->phy_state;
- phylink_resolve_flow(pl, &link_state);
-- phylink_mac_config(pl, &link_state);
-+ phylink_mac_config_up(pl, &link_state);
- break;
-
- case MLO_AN_FIXED:
- phylink_get_fixed_state(pl, &link_state);
-- phylink_mac_config(pl, &link_state);
-+ phylink_mac_config_up(pl, &link_state);
- break;
-
- case MLO_AN_INBAND:
+++ /dev/null
-From 72f973f292b3eaaf451ebcd3253900d41f4ef24a Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 25 Jan 2019 17:42:51 +0000
-Subject: [PATCH] net: phylink: ensure inband AN works correctly
-
-Do not update the link interface mode while the link is down to avoid
-spurious link interface changes.
-
-Always call mac_config if we have a PHY to propagate the pause mode
-settings to the MAC.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/phylink.c | 37 +++++++++++++++----------------------
- 1 file changed, 15 insertions(+), 22 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -459,28 +459,21 @@ static void phylink_resolve(struct work_
-
- case MLO_AN_INBAND:
- phylink_get_mac_state(pl, &link_state);
-- if (pl->phydev) {
-- bool changed = false;
-
-- link_state.link = link_state.link &&
-- pl->phy_state.link;
-+ /* If we have a phy, the "up" state is the union of
-+ * both the PHY and the MAC */
-+ if (pl->phydev)
-+ link_state.link &= pl->phy_state.link;
-
-- if (pl->phy_state.interface !=
-- link_state.interface) {
-- link_state.interface = pl->phy_state.interface;
-- changed = true;
-- }
-+ /* Only update if the PHY link is up */
-+ if (pl->phydev && pl->phy_state.link) {
-+ link_state.interface = pl->phy_state.interface;
-
-- /* Propagate the flow control from the PHY
-- * to the MAC. Also propagate the interface
-- * if changed.
-- */
-- if (pl->phy_state.link || changed) {
-- link_state.pause |= pl->phy_state.pause;
-- phylink_resolve_flow(pl, &link_state);
--
-- phylink_mac_config(pl, &link_state);
-- }
-+ /* If we have a PHY, we need to update with
-+ * the pause mode bits. */
-+ link_state.pause |= pl->phy_state.pause;
-+ phylink_resolve_flow(pl, &link_state);
-+ phylink_mac_config(pl, &link_state);
- }
- break;
- }
+++ /dev/null
-From 1da223db3a0c522300b519ecbe1dc45927e28088 Mon Sep 17 00:00:00 2001
-From: Andrew Lunn <andrew@lunn.ch>
-Date: Wed, 12 Sep 2018 01:53:15 +0200
-Subject: [PATCH 600/660] net: ethernet: Add helper for MACs which support asym
- pause
-
-Rather than have the MAC drivers manipulate phydev members to indicate
-they support Asym Pause, add a helper function.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/phy_device.c | 13 +++++++++++++
- include/linux/phy.h | 1 +
- 2 files changed, 14 insertions(+)
-
---- a/drivers/net/phy/phy_device.c
-+++ b/drivers/net/phy/phy_device.c
-@@ -1783,6 +1783,19 @@ int phy_set_max_speed(struct phy_device
- }
- EXPORT_SYMBOL(phy_set_max_speed);
-
-+/**
-+ * phy_support_asym_pause - Enable support of asym pause
-+ * @phydev: target phy_device struct
-+ *
-+ * Description: Called by the MAC to indicate is supports Asym Pause.
-+ */
-+void phy_support_asym_pause(struct phy_device *phydev)
-+{
-+ phydev->supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
-+ phydev->advertising = phydev->supported;
-+}
-+EXPORT_SYMBOL(phy_support_asym_pause);
-+
- static void of_set_phy_supported(struct phy_device *phydev)
- {
- struct device_node *node = phydev->mdio.dev.of_node;
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -1051,6 +1051,7 @@ int phy_mii_ioctl(struct phy_device *phy
- int phy_start_interrupts(struct phy_device *phydev);
- void phy_print_status(struct phy_device *phydev);
- int phy_set_max_speed(struct phy_device *phydev, u32 max_speed);
-+void phy_support_asym_pause(struct phy_device *phydev);
-
- int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask,
- int (*run)(struct phy_device *));
+++ /dev/null
-From ce825df56e0480a2cbb296e38976babafb57e503 Mon Sep 17 00:00:00 2001
-From: Andrew Lunn <andrew@lunn.ch>
-Date: Wed, 12 Sep 2018 01:53:17 +0200
-Subject: [PATCH 601/660] net: ethernet: Add helper for set_pauseparam for Asym
- Pause
-
-ethtool can be used to enable/disable pause. Add a helper to configure
-the PHY when asym pause is supported.
-
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/phy_device.c | 30 ++++++++++++++++++++++++++++++
- include/linux/phy.h | 1 +
- 2 files changed, 31 insertions(+)
-
---- a/drivers/net/phy/phy_device.c
-+++ b/drivers/net/phy/phy_device.c
-@@ -1796,6 +1796,36 @@ void phy_support_asym_pause(struct phy_d
- }
- EXPORT_SYMBOL(phy_support_asym_pause);
-
-+/**
-+ * phy_set_asym_pause - Configure Pause and Asym Pause
-+ * @phydev: target phy_device struct
-+ * @rx: Receiver Pause is supported
-+ * @tx: Transmit Pause is supported
-+ *
-+ * Description: Configure advertised Pause support depending on if
-+ * transmit and receiver pause is supported. If there has been a
-+ * change in adverting, trigger a new autoneg. Generally called from
-+ * the set_pauseparam .ndo.
-+ */
-+void phy_set_asym_pause(struct phy_device *phydev, bool rx, bool tx)
-+{
-+ u16 oldadv = phydev->advertising;
-+ u16 newadv = oldadv &= ~(SUPPORTED_Pause | SUPPORTED_Asym_Pause);
-+
-+ if (rx)
-+ newadv |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
-+ if (tx)
-+ newadv ^= SUPPORTED_Asym_Pause;
-+
-+ if (oldadv != newadv) {
-+ phydev->advertising = newadv;
-+
-+ if (phydev->autoneg)
-+ phy_start_aneg(phydev);
-+ }
-+}
-+EXPORT_SYMBOL(phy_set_asym_pause);
-+
- static void of_set_phy_supported(struct phy_device *phydev)
- {
- struct device_node *node = phydev->mdio.dev.of_node;
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -1052,6 +1052,7 @@ int phy_start_interrupts(struct phy_devi
- void phy_print_status(struct phy_device *phydev);
- int phy_set_max_speed(struct phy_device *phydev, u32 max_speed);
- void phy_support_asym_pause(struct phy_device *phydev);
-+void phy_set_asym_pause(struct phy_device *phydev, bool rx, bool tx);
-
- int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask,
- int (*run)(struct phy_device *));
+++ /dev/null
-From 1541649a9dd79e9b941d399de564475e426a2d0b Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Tue, 25 Sep 2018 11:28:45 -0700
-Subject: [PATCH 602/660] net: phy: Stop with excessive soft reset
-
-While consolidating the PHY reset in phy_init_hw() an unconditionaly
-BMCR soft-reset I became quite trigger happy with those. This was later
-on deactivated for the Generic PHY driver on the premise that a prior
-software entity (e.g: bootloader) might have applied workarounds in
-commit 0878fff1f42c ("net: phy: Do not perform software reset for
-Generic PHY").
-
-Since we have a hook to wire-up a soft_reset callback, just use that and
-get rid of the call to genphy_soft_reset() entirely. This speeds up
-initialization and link establishment for most PHYs out there that do
-not require a reset.
-
-Fixes: 87aa9f9c61ad ("net: phy: consolidate PHY reset in phy_init_hw()")
-Tested-by: Wang, Dongsheng <dongsheng.wang@hxt-semitech.com>
-Tested-by: Chris Healy <cphealy@gmail.com>
-Tested-by: Andrew Lunn <andrew@lunn.ch>
-Tested-by: Clemens Gruber <clemens.gruber@pqgruber.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/phy_device.c | 2 --
- 1 file changed, 2 deletions(-)
-
---- a/drivers/net/phy/phy_device.c
-+++ b/drivers/net/phy/phy_device.c
-@@ -892,8 +892,6 @@ int phy_init_hw(struct phy_device *phyde
-
- if (phydev->drv->soft_reset)
- ret = phydev->drv->soft_reset(phydev);
-- else
-- ret = genphy_soft_reset(phydev);
-
- if (ret < 0)
- return ret;
+++ /dev/null
-From 80758d9542205cd2e9fa730067bc3888d4f5a096 Mon Sep 17 00:00:00 2001
-From: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
-Date: Wed, 6 Feb 2019 07:36:40 +0100
-Subject: [PATCH 603/660] net: phy: provide full set of accessor functions to
- MMD registers
-
-This adds full set of locked and unlocked accessor functions to read and
-write PHY MMD registers and/or bitfields.
-
-Set of functions exactly matches what is already available for PHY
-legacy registers.
-
-Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
-Signed-off-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/phy-core.c | 116 ++++++++++++++++++++++++++++----
- include/linux/phy.h | 134 ++++++++++++++++++++++++++++++-------
- 2 files changed, 214 insertions(+), 36 deletions(-)
-
---- a/drivers/net/phy/phy-core.c
-+++ b/drivers/net/phy/phy-core.c
-@@ -247,15 +247,15 @@ static void mmd_phy_indirect(struct mii_
- }
-
- /**
-- * phy_read_mmd - Convenience function for reading a register
-+ * __phy_read_mmd - Convenience function for reading a register
- * from an MMD on a given PHY.
- * @phydev: The phy_device struct
- * @devad: The MMD to read from (0..31)
- * @regnum: The register on the MMD to read (0..65535)
- *
-- * Same rules as for phy_read();
-+ * Same rules as for __phy_read();
- */
--int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum)
-+int __phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum)
- {
- int val;
-
-@@ -267,33 +267,52 @@ int phy_read_mmd(struct phy_device *phyd
- } else if (phydev->is_c45) {
- u32 addr = MII_ADDR_C45 | (devad << 16) | (regnum & 0xffff);
-
-- val = mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, addr);
-+ val = __mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, addr);
- } else {
- struct mii_bus *bus = phydev->mdio.bus;
- int phy_addr = phydev->mdio.addr;
-
-- mutex_lock(&bus->mdio_lock);
- mmd_phy_indirect(bus, phy_addr, devad, regnum);
-
- /* Read the content of the MMD's selected register */
- val = __mdiobus_read(bus, phy_addr, MII_MMD_DATA);
-- mutex_unlock(&bus->mdio_lock);
- }
- return val;
- }
-+EXPORT_SYMBOL(__phy_read_mmd);
-+
-+/**
-+ * phy_read_mmd - Convenience function for reading a register
-+ * from an MMD on a given PHY.
-+ * @phydev: The phy_device struct
-+ * @devad: The MMD to read from
-+ * @regnum: The register on the MMD to read
-+ *
-+ * Same rules as for phy_read();
-+ */
-+int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum)
-+{
-+ int ret;
-+
-+ mutex_lock(&phydev->mdio.bus->mdio_lock);
-+ ret = __phy_read_mmd(phydev, devad, regnum);
-+ mutex_unlock(&phydev->mdio.bus->mdio_lock);
-+
-+ return ret;
-+}
- EXPORT_SYMBOL(phy_read_mmd);
-
- /**
-- * phy_write_mmd - Convenience function for writing a register
-+ * __phy_write_mmd - Convenience function for writing a register
- * on an MMD on a given PHY.
- * @phydev: The phy_device struct
- * @devad: The MMD to read from
- * @regnum: The register on the MMD to read
- * @val: value to write to @regnum
- *
-- * Same rules as for phy_write();
-+ * Same rules as for __phy_write();
- */
--int phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val)
-+int __phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val)
- {
- int ret;
-
-@@ -305,23 +324,43 @@ int phy_write_mmd(struct phy_device *phy
- } else if (phydev->is_c45) {
- u32 addr = MII_ADDR_C45 | (devad << 16) | (regnum & 0xffff);
-
-- ret = mdiobus_write(phydev->mdio.bus, phydev->mdio.addr,
-- addr, val);
-+ ret = __mdiobus_write(phydev->mdio.bus, phydev->mdio.addr,
-+ addr, val);
- } else {
- struct mii_bus *bus = phydev->mdio.bus;
- int phy_addr = phydev->mdio.addr;
-
-- mutex_lock(&bus->mdio_lock);
- mmd_phy_indirect(bus, phy_addr, devad, regnum);
-
- /* Write the data into MMD's selected register */
- __mdiobus_write(bus, phy_addr, MII_MMD_DATA, val);
-- mutex_unlock(&bus->mdio_lock);
-
- ret = 0;
- }
- return ret;
- }
-+EXPORT_SYMBOL(__phy_write_mmd);
-+
-+/**
-+ * phy_write_mmd - Convenience function for writing a register
-+ * on an MMD on a given PHY.
-+ * @phydev: The phy_device struct
-+ * @devad: The MMD to read from
-+ * @regnum: The register on the MMD to read
-+ * @val: value to write to @regnum
-+ *
-+ * Same rules as for phy_write();
-+ */
-+int phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val)
-+{
-+ int ret;
-+
-+ mutex_lock(&phydev->mdio.bus->mdio_lock);
-+ ret = __phy_write_mmd(phydev, devad, regnum, val);
-+ mutex_unlock(&phydev->mdio.bus->mdio_lock);
-+
-+ return ret;
-+}
- EXPORT_SYMBOL(phy_write_mmd);
-
- /**
-@@ -371,6 +410,57 @@ int phy_modify(struct phy_device *phydev
- }
- EXPORT_SYMBOL_GPL(phy_modify);
-
-+/**
-+ * __phy_modify_mmd - Convenience function for modifying a register on MMD
-+ * @phydev: the phy_device struct
-+ * @devad: the MMD containing register to modify
-+ * @regnum: register number to modify
-+ * @mask: bit mask of bits to clear
-+ * @set: new value of bits set in mask to write to @regnum
-+ *
-+ * Unlocked helper function which allows a MMD register to be modified as
-+ * new register value = (old register value & ~mask) | set
-+ */
-+int __phy_modify_mmd(struct phy_device *phydev, int devad, u32 regnum,
-+ u16 mask, u16 set)
-+{
-+ int ret;
-+
-+ ret = __phy_read_mmd(phydev, devad, regnum);
-+ if (ret < 0)
-+ return ret;
-+
-+ ret = __phy_write_mmd(phydev, devad, regnum, (ret & ~mask) | set);
-+
-+ return ret < 0 ? ret : 0;
-+}
-+EXPORT_SYMBOL_GPL(__phy_modify_mmd);
-+
-+/**
-+ * phy_modify_mmd - Convenience function for modifying a register on MMD
-+ * @phydev: the phy_device struct
-+ * @devad: the MMD containing register to modify
-+ * @regnum: register number to modify
-+ * @mask: bit mask of bits to clear
-+ * @set: new value of bits set in mask to write to @regnum
-+ *
-+ * NOTE: MUST NOT be called from interrupt context,
-+ * because the bus read/write functions may wait for an interrupt
-+ * to conclude the operation.
-+ */
-+int phy_modify_mmd(struct phy_device *phydev, int devad, u32 regnum,
-+ u16 mask, u16 set)
-+{
-+ int ret;
-+
-+ mutex_lock(&phydev->mdio.bus->mdio_lock);
-+ ret = __phy_modify_mmd(phydev, devad, regnum, mask, set);
-+ mutex_unlock(&phydev->mdio.bus->mdio_lock);
-+
-+ return ret;
-+}
-+EXPORT_SYMBOL_GPL(phy_modify_mmd);
-+
- static int __phy_read_page(struct phy_device *phydev)
- {
- return phydev->drv->read_page(phydev);
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -697,17 +697,6 @@ size_t phy_speeds(unsigned int *speeds,
- void phy_resolve_aneg_linkmode(struct phy_device *phydev);
-
- /**
-- * phy_read_mmd - Convenience function for reading a register
-- * from an MMD on a given PHY.
-- * @phydev: The phy_device struct
-- * @devad: The MMD to read from
-- * @regnum: The register on the MMD to read
-- *
-- * Same rules as for phy_read();
-- */
--int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum);
--
--/**
- * phy_read - Convenience function for reading a given PHY register
- * @phydev: the phy_device struct
- * @regnum: register number to read
-@@ -762,9 +751,60 @@ static inline int __phy_write(struct phy
- val);
- }
-
-+/**
-+ * phy_read_mmd - Convenience function for reading a register
-+ * from an MMD on a given PHY.
-+ * @phydev: The phy_device struct
-+ * @devad: The MMD to read from
-+ * @regnum: The register on the MMD to read
-+ *
-+ * Same rules as for phy_read();
-+ */
-+int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum);
-+
-+/**
-+ * __phy_read_mmd - Convenience function for reading a register
-+ * from an MMD on a given PHY.
-+ * @phydev: The phy_device struct
-+ * @devad: The MMD to read from
-+ * @regnum: The register on the MMD to read
-+ *
-+ * Same rules as for __phy_read();
-+ */
-+int __phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum);
-+
-+/**
-+ * phy_write_mmd - Convenience function for writing a register
-+ * on an MMD on a given PHY.
-+ * @phydev: The phy_device struct
-+ * @devad: The MMD to write to
-+ * @regnum: The register on the MMD to read
-+ * @val: value to write to @regnum
-+ *
-+ * Same rules as for phy_write();
-+ */
-+int phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val);
-+
-+/**
-+ * __phy_write_mmd - Convenience function for writing a register
-+ * on an MMD on a given PHY.
-+ * @phydev: The phy_device struct
-+ * @devad: The MMD to write to
-+ * @regnum: The register on the MMD to read
-+ * @val: value to write to @regnum
-+ *
-+ * Same rules as for __phy_write();
-+ */
-+int __phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val);
-+
- int __phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set);
- int phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set);
-
-+int __phy_modify_mmd(struct phy_device *phydev, int devad, u32 regnum,
-+ u16 mask, u16 set);
-+int phy_modify_mmd(struct phy_device *phydev, int devad, u32 regnum,
-+ u16 mask, u16 set);
-+
- /**
- * __phy_set_bits - Convenience function for setting bits in a PHY register
- * @phydev: the phy_device struct
-@@ -815,6 +855,66 @@ static inline int phy_clear_bits(struct
- }
-
- /**
-+ * __phy_set_bits_mmd - Convenience function for setting bits in a register
-+ * on MMD
-+ * @phydev: the phy_device struct
-+ * @devad: the MMD containing register to modify
-+ * @regnum: register number to modify
-+ * @val: bits to set
-+ *
-+ * The caller must have taken the MDIO bus lock.
-+ */
-+static inline int __phy_set_bits_mmd(struct phy_device *phydev, int devad,
-+ u32 regnum, u16 val)
-+{
-+ return __phy_modify_mmd(phydev, devad, regnum, 0, val);
-+}
-+
-+/**
-+ * __phy_clear_bits_mmd - Convenience function for clearing bits in a register
-+ * on MMD
-+ * @phydev: the phy_device struct
-+ * @devad: the MMD containing register to modify
-+ * @regnum: register number to modify
-+ * @val: bits to clear
-+ *
-+ * The caller must have taken the MDIO bus lock.
-+ */
-+static inline int __phy_clear_bits_mmd(struct phy_device *phydev, int devad,
-+ u32 regnum, u16 val)
-+{
-+ return __phy_modify_mmd(phydev, devad, regnum, val, 0);
-+}
-+
-+/**
-+ * phy_set_bits_mmd - Convenience function for setting bits in a register
-+ * on MMD
-+ * @phydev: the phy_device struct
-+ * @devad: the MMD containing register to modify
-+ * @regnum: register number to modify
-+ * @val: bits to set
-+ */
-+static inline int phy_set_bits_mmd(struct phy_device *phydev, int devad,
-+ u32 regnum, u16 val)
-+{
-+ return phy_modify_mmd(phydev, devad, regnum, 0, val);
-+}
-+
-+/**
-+ * phy_clear_bits_mmd - Convenience function for clearing bits in a register
-+ * on MMD
-+ * @phydev: the phy_device struct
-+ * @devad: the MMD containing register to modify
-+ * @regnum: register number to modify
-+ * @val: bits to clear
-+ */
-+static inline int phy_clear_bits_mmd(struct phy_device *phydev, int devad,
-+ u32 regnum, u16 val)
-+{
-+ return phy_modify_mmd(phydev, devad, regnum, val, 0);
-+}
-+
-+/**
- * phy_interrupt_is_valid - Convenience function for testing a given PHY irq
- * @phydev: the phy_device struct
- *
-@@ -890,18 +990,6 @@ static inline bool phy_is_pseudo_fixed_l
- return phydev->is_pseudo_fixed_link;
- }
-
--/**
-- * phy_write_mmd - Convenience function for writing a register
-- * on an MMD on a given PHY.
-- * @phydev: The phy_device struct
-- * @devad: The MMD to read from
-- * @regnum: The register on the MMD to read
-- * @val: value to write to @regnum
-- *
-- * Same rules as for phy_write();
-- */
--int phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val);
--
- int phy_save_page(struct phy_device *phydev);
- int phy_select_page(struct phy_device *phydev, int page);
- int phy_restore_page(struct phy_device *phydev, int oldpage, int ret);
+++ /dev/null
-From c1e3f753f6b85d7636024159bb78f764e09492f1 Mon Sep 17 00:00:00 2001
-From: Heiner Kallweit <hkallweit1@gmail.com>
-Date: Sun, 10 Feb 2019 19:57:56 +0100
-Subject: [PATCH 604/660] net: phy: add register modifying helpers returning 1
- on change
-
-When modifying registers there are scenarios where we need to know
-whether the register content actually changed. This patch adds
-new helpers to not break users of the current ones, phy_modify() etc.
-
-Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/phy-core.c | 127 ++++++++++++++++++++++++++++++++++---
- include/linux/phy.h | 12 +++-
- 2 files changed, 128 insertions(+), 11 deletions(-)
-
---- a/drivers/net/phy/phy-core.c
-+++ b/drivers/net/phy/phy-core.c
-@@ -364,7 +364,7 @@ int phy_write_mmd(struct phy_device *phy
- EXPORT_SYMBOL(phy_write_mmd);
-
- /**
-- * __phy_modify() - Convenience function for modifying a PHY register
-+ * __phy_modify_changed() - Convenience function for modifying a PHY register
- * @phydev: a pointer to a &struct phy_device
- * @regnum: register number
- * @mask: bit mask of bits to clear
-@@ -372,16 +372,69 @@ EXPORT_SYMBOL(phy_write_mmd);
- *
- * Unlocked helper function which allows a PHY register to be modified as
- * new register value = (old register value & ~mask) | set
-+ *
-+ * Returns negative errno, 0 if there was no change, and 1 in case of change
- */
--int __phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set)
-+int __phy_modify_changed(struct phy_device *phydev, u32 regnum, u16 mask,
-+ u16 set)
- {
-- int ret;
-+ int new, ret;
-
- ret = __phy_read(phydev, regnum);
- if (ret < 0)
- return ret;
-
-- ret = __phy_write(phydev, regnum, (ret & ~mask) | set);
-+ new = (ret & ~mask) | set;
-+ if (new == ret)
-+ return 0;
-+
-+ ret = __phy_write(phydev, regnum, new);
-+
-+ return ret < 0 ? ret : 1;
-+}
-+EXPORT_SYMBOL_GPL(__phy_modify_changed);
-+
-+/**
-+ * phy_modify_changed - Function for modifying a PHY register
-+ * @phydev: the phy_device struct
-+ * @regnum: register number to modify
-+ * @mask: bit mask of bits to clear
-+ * @set: new value of bits set in mask to write to @regnum
-+ *
-+ * NOTE: MUST NOT be called from interrupt context,
-+ * because the bus read/write functions may wait for an interrupt
-+ * to conclude the operation.
-+ *
-+ * Returns negative errno, 0 if there was no change, and 1 in case of change
-+ */
-+int phy_modify_changed(struct phy_device *phydev, u32 regnum, u16 mask, u16 set)
-+{
-+ int ret;
-+
-+ mutex_lock(&phydev->mdio.bus->mdio_lock);
-+ ret = __phy_modify_changed(phydev, regnum, mask, set);
-+ mutex_unlock(&phydev->mdio.bus->mdio_lock);
-+
-+ return ret;
-+}
-+EXPORT_SYMBOL_GPL(phy_modify_changed);
-+
-+/**
-+ * __phy_modify - Convenience function for modifying a PHY register
-+ * @phydev: the phy_device struct
-+ * @regnum: register number to modify
-+ * @mask: bit mask of bits to clear
-+ * @set: new value of bits set in mask to write to @regnum
-+ *
-+ * NOTE: MUST NOT be called from interrupt context,
-+ * because the bus read/write functions may wait for an interrupt
-+ * to conclude the operation.
-+ */
-+int __phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set)
-+{
-+ int ret;
-+
-+ ret = __phy_modify_changed(phydev, regnum, mask, set);
-
- return ret < 0 ? ret : 0;
- }
-@@ -411,7 +464,7 @@ int phy_modify(struct phy_device *phydev
- EXPORT_SYMBOL_GPL(phy_modify);
-
- /**
-- * __phy_modify_mmd - Convenience function for modifying a register on MMD
-+ * __phy_modify_mmd_changed - Function for modifying a register on MMD
- * @phydev: the phy_device struct
- * @devad: the MMD containing register to modify
- * @regnum: register number to modify
-@@ -420,17 +473,73 @@ EXPORT_SYMBOL_GPL(phy_modify);
- *
- * Unlocked helper function which allows a MMD register to be modified as
- * new register value = (old register value & ~mask) | set
-+ *
-+ * Returns negative errno, 0 if there was no change, and 1 in case of change
- */
--int __phy_modify_mmd(struct phy_device *phydev, int devad, u32 regnum,
-- u16 mask, u16 set)
-+int __phy_modify_mmd_changed(struct phy_device *phydev, int devad, u32 regnum,
-+ u16 mask, u16 set)
- {
-- int ret;
-+ int new, ret;
-
- ret = __phy_read_mmd(phydev, devad, regnum);
- if (ret < 0)
- return ret;
-
-- ret = __phy_write_mmd(phydev, devad, regnum, (ret & ~mask) | set);
-+ new = (ret & ~mask) | set;
-+ if (new == ret)
-+ return 0;
-+
-+ ret = __phy_write_mmd(phydev, devad, regnum, new);
-+
-+ return ret < 0 ? ret : 1;
-+}
-+EXPORT_SYMBOL_GPL(__phy_modify_mmd_changed);
-+
-+/**
-+ * phy_modify_mmd_changed - Function for modifying a register on MMD
-+ * @phydev: the phy_device struct
-+ * @devad: the MMD containing register to modify
-+ * @regnum: register number to modify
-+ * @mask: bit mask of bits to clear
-+ * @set: new value of bits set in mask to write to @regnum
-+ *
-+ * NOTE: MUST NOT be called from interrupt context,
-+ * because the bus read/write functions may wait for an interrupt
-+ * to conclude the operation.
-+ *
-+ * Returns negative errno, 0 if there was no change, and 1 in case of change
-+ */
-+int phy_modify_mmd_changed(struct phy_device *phydev, int devad, u32 regnum,
-+ u16 mask, u16 set)
-+{
-+ int ret;
-+
-+ mutex_lock(&phydev->mdio.bus->mdio_lock);
-+ ret = __phy_modify_mmd_changed(phydev, devad, regnum, mask, set);
-+ mutex_unlock(&phydev->mdio.bus->mdio_lock);
-+
-+ return ret;
-+}
-+EXPORT_SYMBOL_GPL(phy_modify_mmd_changed);
-+
-+/**
-+ * __phy_modify_mmd - Convenience function for modifying a register on MMD
-+ * @phydev: the phy_device struct
-+ * @devad: the MMD containing register to modify
-+ * @regnum: register number to modify
-+ * @mask: bit mask of bits to clear
-+ * @set: new value of bits set in mask to write to @regnum
-+ *
-+ * NOTE: MUST NOT be called from interrupt context,
-+ * because the bus read/write functions may wait for an interrupt
-+ * to conclude the operation.
-+ */
-+int __phy_modify_mmd(struct phy_device *phydev, int devad, u32 regnum,
-+ u16 mask, u16 set)
-+{
-+ int ret;
-+
-+ ret = __phy_modify_mmd_changed(phydev, devad, regnum, mask, set);
-
- return ret < 0 ? ret : 0;
- }
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -797,13 +797,21 @@ int phy_write_mmd(struct phy_device *phy
- */
- int __phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val);
-
-+int __phy_modify_changed(struct phy_device *phydev, u32 regnum, u16 mask,
-+ u16 set);
-+int phy_modify_changed(struct phy_device *phydev, u32 regnum, u16 mask,
-+ u16 set);
- int __phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set);
- int phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set);
-
-+int __phy_modify_mmd_changed(struct phy_device *phydev, int devad, u32 regnum,
-+ u16 mask, u16 set);
-+int phy_modify_mmd_changed(struct phy_device *phydev, int devad, u32 regnum,
-+ u16 mask, u16 set);
- int __phy_modify_mmd(struct phy_device *phydev, int devad, u32 regnum,
-- u16 mask, u16 set);
-+ u16 mask, u16 set);
- int phy_modify_mmd(struct phy_device *phydev, int devad, u32 regnum,
-- u16 mask, u16 set);
-+ u16 mask, u16 set);
-
- /**
- * __phy_set_bits - Convenience function for setting bits in a PHY register
+++ /dev/null
-From 2c3db705737cf52d7d24c993f0889b25b956c718 Mon Sep 17 00:00:00 2001
-From: Heiner Kallweit <hkallweit1@gmail.com>
-Date: Mon, 18 Feb 2019 21:27:18 +0100
-Subject: [PATCH 605/660] net: phy: add genphy_c45_check_and_restart_aneg
-
-This function will be used by config_aneg callback implementations of
-PHY drivers and allows to reduce boilerplate code.
-
-Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/phy-c45.c | 30 ++++++++++++++++++++++++++++++
- include/linux/phy.h | 1 +
- 2 files changed, 31 insertions(+)
-
---- a/drivers/net/phy/phy-c45.c
-+++ b/drivers/net/phy/phy-c45.c
-@@ -110,6 +110,36 @@ int genphy_c45_restart_aneg(struct phy_d
- EXPORT_SYMBOL_GPL(genphy_c45_restart_aneg);
-
- /**
-+ * genphy_c45_check_and_restart_aneg - Enable and restart auto-negotiation
-+ * @phydev: target phy_device struct
-+ * @restart: whether aneg restart is requested
-+ *
-+ * This assumes that the auto-negotiation MMD is present.
-+ *
-+ * Check, and restart auto-negotiation if needed.
-+ */
-+int genphy_c45_check_and_restart_aneg(struct phy_device *phydev, bool restart)
-+{
-+ int ret = 0;
-+
-+ if (!restart) {
-+ /* Configure and restart aneg if it wasn't set before */
-+ ret = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1);
-+ if (ret < 0)
-+ return ret;
-+
-+ if (!(ret & MDIO_AN_CTRL1_ENABLE))
-+ restart = true;
-+ }
-+
-+ if (restart)
-+ ret = genphy_c45_restart_aneg(phydev);
-+
-+ return ret;
-+}
-+EXPORT_SYMBOL_GPL(genphy_c45_check_and_restart_aneg);
-+
-+/**
- * genphy_c45_aneg_done - return auto-negotiation complete status
- * @phydev: target phy_device struct
- *
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -1100,6 +1100,7 @@ int genphy_write_mmd_unsupported(struct
-
- /* Clause 45 PHY */
- int genphy_c45_restart_aneg(struct phy_device *phydev);
-+int genphy_c45_check_and_restart_aneg(struct phy_device *phydev, bool restart);
- int genphy_c45_aneg_done(struct phy_device *phydev);
- int genphy_c45_read_link(struct phy_device *phydev, u32 mmd_mask);
- int genphy_c45_read_lpa(struct phy_device *phydev);
+++ /dev/null
-From 4c4323084e9a67210c8d269dceba1be99356c414 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Tue, 28 May 2019 10:57:18 +0100
-Subject: [PATCH 606/660] net: phylink: remove netdev from phylink mii ioctl
- emulation
-
-The netdev used in the phylink ioctl emulation is never used, so let's
-remove it.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/phylink.c | 12 ++++--------
- 1 file changed, 4 insertions(+), 8 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -1360,8 +1360,8 @@ EXPORT_SYMBOL_GPL(phylink_ethtool_set_ee
- *
- * FIXME: should deal with negotiation state too.
- */
--static int phylink_mii_emul_read(struct net_device *ndev, unsigned int reg,
-- struct phylink_link_state *state, bool aneg)
-+static int phylink_mii_emul_read(unsigned int reg,
-+ struct phylink_link_state *state)
- {
- struct fixed_phy_status fs;
- int val;
-@@ -1376,8 +1376,6 @@ static int phylink_mii_emul_read(struct
- if (reg == MII_BMSR) {
- if (!state->an_complete)
- val &= ~BMSR_ANEGCOMPLETE;
-- if (!aneg)
-- val &= ~BMSR_ANEGCAPABLE;
- }
- return val;
- }
-@@ -1473,8 +1471,7 @@ static int phylink_mii_read(struct phyli
- case MLO_AN_FIXED:
- if (phy_id == 0) {
- phylink_get_fixed_state(pl, &state);
-- val = phylink_mii_emul_read(pl->netdev, reg, &state,
-- true);
-+ val = phylink_mii_emul_read(reg, &state);
- }
- break;
-
-@@ -1487,8 +1484,7 @@ static int phylink_mii_read(struct phyli
- if (val < 0)
- return val;
-
-- val = phylink_mii_emul_read(pl->netdev, reg, &state,
-- true);
-+ val = phylink_mii_emul_read(reg, &state);
- }
- break;
- }
+++ /dev/null
-From cba0aba37d2228556e0d1f776d403435868cdbfa Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Tue, 28 May 2019 10:57:23 +0100
-Subject: [PATCH 607/660] net: phylink: support for link gpio interrupt
-
-Add support for using GPIO interrupts with a fixed-link GPIO rather than
-polling the GPIO every second and invoking the phylink resolution. This
-avoids unnecessary calls to mac_config().
-
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/phylink.c | 36 ++++++++++++++++++++++++++++++++----
- 1 file changed, 32 insertions(+), 4 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -59,6 +59,7 @@ struct phylink {
- phy_interface_t cur_interface;
-
- struct gpio_desc *link_gpio;
-+ unsigned int link_irq;
- struct timer_list link_poll;
- void (*get_fixed_state)(struct net_device *dev,
- struct phylink_link_state *s);
-@@ -645,7 +646,7 @@ void phylink_destroy(struct phylink *pl)
- {
- if (pl->sfp_bus)
- sfp_unregister_upstream(pl->sfp_bus);
-- if (!IS_ERR_OR_NULL(pl->link_gpio))
-+ if (pl->link_gpio)
- gpiod_put(pl->link_gpio);
-
- cancel_work_sync(&pl->resolve);
-@@ -912,6 +913,15 @@ void phylink_mac_change(struct phylink *
- }
- EXPORT_SYMBOL_GPL(phylink_mac_change);
-
-+static irqreturn_t phylink_link_handler(int irq, void *data)
-+{
-+ struct phylink *pl = data;
-+
-+ phylink_run_resolve(pl);
-+
-+ return IRQ_HANDLED;
-+}
-+
- /**
- * phylink_start() - start a phylink instance
- * @pl: a pointer to a &struct phylink returned from phylink_create()
-@@ -947,7 +957,22 @@ void phylink_start(struct phylink *pl)
- clear_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
- phylink_run_resolve(pl);
-
-- if (pl->link_an_mode == MLO_AN_FIXED && !IS_ERR(pl->link_gpio))
-+ if (pl->link_an_mode == MLO_AN_FIXED && pl->link_gpio) {
-+ int irq = gpiod_to_irq(pl->link_gpio);
-+
-+ if (irq > 0) {
-+ if (!request_irq(irq, phylink_link_handler,
-+ IRQF_TRIGGER_RISING |
-+ IRQF_TRIGGER_FALLING,
-+ "netdev link", pl))
-+ pl->link_irq = irq;
-+ else
-+ irq = 0;
-+ }
-+ if (irq <= 0)
-+ mod_timer(&pl->link_poll, jiffies + HZ);
-+ }
-+ if (pl->link_an_mode == MLO_AN_FIXED && pl->get_fixed_state)
- mod_timer(&pl->link_poll, jiffies + HZ);
- if (pl->sfp_bus)
- sfp_upstream_start(pl->sfp_bus);
-@@ -973,8 +998,11 @@ void phylink_stop(struct phylink *pl)
- phy_stop(pl->phydev);
- if (pl->sfp_bus)
- sfp_upstream_stop(pl->sfp_bus);
-- if (pl->link_an_mode == MLO_AN_FIXED && !IS_ERR(pl->link_gpio))
-- del_timer_sync(&pl->link_poll);
-+ del_timer_sync(&pl->link_poll);
-+ if (pl->link_irq) {
-+ free_irq(pl->link_irq, pl);
-+ pl->link_irq = 0;
-+ }
-
- phylink_run_resolve_and_disable(pl, PHYLINK_DISABLE_STOPPED);
- }
+++ /dev/null
-From eb5df3d026824832831376bbdf04e01a52776eea Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Tue, 28 May 2019 10:57:29 +0100
-Subject: [PATCH 608/660] net: phy: allow Clause 45 access via mii ioctl
-
-Allow userspace to generate Clause 45 MII access cycles via phylib.
-This is useful for tools such as mii-diag to be able to inspect Clause
-45 PHYs.
-
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/phy.c | 33 ++++++++++++++++++++++++---------
- 1 file changed, 24 insertions(+), 9 deletions(-)
-
---- a/drivers/net/phy/phy.c
-+++ b/drivers/net/phy/phy.c
-@@ -397,6 +397,7 @@ int phy_mii_ioctl(struct phy_device *phy
- struct mii_ioctl_data *mii_data = if_mii(ifr);
- u16 val = mii_data->val_in;
- bool change_autoneg = false;
-+ int prtad, devad;
-
- switch (cmd) {
- case SIOCGMIIPHY:
-@@ -404,14 +405,29 @@ int phy_mii_ioctl(struct phy_device *phy
- /* fall through */
-
- case SIOCGMIIREG:
-- mii_data->val_out = mdiobus_read(phydev->mdio.bus,
-- mii_data->phy_id,
-- mii_data->reg_num);
-+ if (mdio_phy_id_is_c45(mii_data->phy_id)) {
-+ prtad = mdio_phy_id_prtad(mii_data->phy_id);
-+ devad = mdio_phy_id_devad(mii_data->phy_id);
-+ devad = MII_ADDR_C45 | devad << 16 | mii_data->reg_num;
-+ } else {
-+ prtad = mii_data->phy_id;
-+ devad = mii_data->reg_num;
-+ }
-+ mii_data->val_out = mdiobus_read(phydev->mdio.bus, prtad,
-+ devad);
- return 0;
-
- case SIOCSMIIREG:
-- if (mii_data->phy_id == phydev->mdio.addr) {
-- switch (mii_data->reg_num) {
-+ if (mdio_phy_id_is_c45(mii_data->phy_id)) {
-+ prtad = mdio_phy_id_prtad(mii_data->phy_id);
-+ devad = mdio_phy_id_devad(mii_data->phy_id);
-+ devad = MII_ADDR_C45 | devad << 16 | mii_data->reg_num;
-+ } else {
-+ prtad = mii_data->phy_id;
-+ devad = mii_data->reg_num;
-+ }
-+ if (prtad == phydev->mdio.addr) {
-+ switch (devad) {
- case MII_BMCR:
- if ((val & (BMCR_RESET | BMCR_ANENABLE)) == 0) {
- if (phydev->autoneg == AUTONEG_ENABLE)
-@@ -443,11 +459,10 @@ int phy_mii_ioctl(struct phy_device *phy
- }
- }
-
-- mdiobus_write(phydev->mdio.bus, mii_data->phy_id,
-- mii_data->reg_num, val);
-+ mdiobus_write(phydev->mdio.bus, prtad, devad, val);
-
-- if (mii_data->phy_id == phydev->mdio.addr &&
-- mii_data->reg_num == MII_BMCR &&
-+ if (prtad == phydev->mdio.addr &&
-+ devad == MII_BMCR &&
- val & BMCR_RESET)
- return phy_init_hw(phydev);
-
+++ /dev/null
-From aeabfaa63285470e81fa341e14f92d68880aa160 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Tue, 28 May 2019 10:57:34 +0100
-Subject: [PATCH 609/660] net: sfp: add mandatory attach/detach methods for sfp
- buses
-
-Add attach and detach methods for SFP buses, which will allow us to get
-rid of the netdev storage in sfp-bus.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/phylink.c | 16 ++++++++++++++++
- drivers/net/phy/sfp-bus.c | 4 ++--
- include/linux/sfp.h | 6 ++++++
- 3 files changed, 24 insertions(+), 2 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -1615,6 +1615,20 @@ int phylink_mii_ioctl(struct phylink *pl
- }
- EXPORT_SYMBOL_GPL(phylink_mii_ioctl);
-
-+static void phylink_sfp_attach(void *upstream, struct sfp_bus *bus)
-+{
-+ struct phylink *pl = upstream;
-+
-+ pl->netdev->sfp_bus = bus;
-+}
-+
-+static void phylink_sfp_detach(void *upstream, struct sfp_bus *bus)
-+{
-+ struct phylink *pl = upstream;
-+
-+ pl->netdev->sfp_bus = NULL;
-+}
-+
- static int phylink_sfp_module_insert(void *upstream,
- const struct sfp_eeprom_id *id)
- {
-@@ -1733,6 +1747,8 @@ static void phylink_sfp_disconnect_phy(v
- }
-
- static const struct sfp_upstream_ops sfp_phylink_ops = {
-+ .attach = phylink_sfp_attach,
-+ .detach = phylink_sfp_detach,
- .module_insert = phylink_sfp_module_insert,
- .link_up = phylink_sfp_link_up,
- .link_down = phylink_sfp_link_down,
---- a/drivers/net/phy/sfp-bus.c
-+++ b/drivers/net/phy/sfp-bus.c
-@@ -425,7 +425,7 @@ static int sfp_register_bus(struct sfp_b
- bus->socket_ops->attach(bus->sfp);
- if (bus->started)
- bus->socket_ops->start(bus->sfp);
-- bus->netdev->sfp_bus = bus;
-+ bus->upstream_ops->attach(bus->upstream, bus);
- bus->registered = true;
- return 0;
- }
-@@ -434,8 +434,8 @@ static void sfp_unregister_bus(struct sf
- {
- const struct sfp_upstream_ops *ops = bus->upstream_ops;
-
-- bus->netdev->sfp_bus = NULL;
- if (bus->registered) {
-+ bus->upstream_ops->detach(bus->upstream, bus);
- if (bus->started)
- bus->socket_ops->stop(bus->sfp);
- bus->socket_ops->detach(bus->sfp);
---- a/include/linux/sfp.h
-+++ b/include/linux/sfp.h
-@@ -469,6 +469,10 @@ struct sfp_bus;
-
- /**
- * struct sfp_upstream_ops - upstream operations structure
-+ * @attach: called when the sfp socket driver is bound to the upstream
-+ * (mandatory).
-+ * @detach: called when the sfp socket driver is unbound from the upstream
-+ * (mandatory).
- * @module_insert: called after a module has been detected to determine
- * whether the module is supported for the upstream device.
- * @module_remove: called after the module has been removed.
-@@ -481,6 +485,8 @@ struct sfp_bus;
- * been removed.
- */
- struct sfp_upstream_ops {
-+ void (*attach)(void *priv, struct sfp_bus *bus);
-+ void (*detach)(void *priv, struct sfp_bus *bus);
- int (*module_insert)(void *priv, const struct sfp_eeprom_id *id);
- void (*module_remove)(void *priv);
- void (*link_down)(void *priv);
+++ /dev/null
-From 60d756717d772be90d07a07cd2cc140c76da3e4a Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Tue, 28 May 2019 10:57:39 +0100
-Subject: [PATCH 610/660] net: sfp: remove sfp-bus use of netdevs
-
-The sfp-bus code now no longer has any use for the network device
-structure, so remove its use.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/phylink.c | 3 +--
- drivers/net/phy/sfp-bus.c | 10 +++-------
- include/linux/sfp.h | 6 ++----
- 3 files changed, 6 insertions(+), 13 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -555,8 +555,7 @@ static int phylink_register_sfp(struct p
- return ret;
- }
-
-- pl->sfp_bus = sfp_register_upstream(ref.fwnode, pl->netdev, pl,
-- &sfp_phylink_ops);
-+ pl->sfp_bus = sfp_register_upstream(ref.fwnode, pl, &sfp_phylink_ops);
- if (!pl->sfp_bus)
- return -ENOMEM;
-
---- a/drivers/net/phy/sfp-bus.c
-+++ b/drivers/net/phy/sfp-bus.c
-@@ -30,7 +30,6 @@ struct sfp_bus {
-
- const struct sfp_upstream_ops *upstream_ops;
- void *upstream;
-- struct net_device *netdev;
- struct phy_device *phydev;
-
- bool registered;
-@@ -517,13 +516,11 @@ static void sfp_upstream_clear(struct sf
- {
- bus->upstream_ops = NULL;
- bus->upstream = NULL;
-- bus->netdev = NULL;
- }
-
- /**
- * sfp_register_upstream() - Register the neighbouring device
- * @fwnode: firmware node for the SFP bus
-- * @ndev: network device associated with the interface
- * @upstream: the upstream private data
- * @ops: the upstream's &struct sfp_upstream_ops
- *
-@@ -534,7 +531,7 @@ static void sfp_upstream_clear(struct sf
- * On error, returns %NULL.
- */
- struct sfp_bus *sfp_register_upstream(struct fwnode_handle *fwnode,
-- struct net_device *ndev, void *upstream,
-+ void *upstream,
- const struct sfp_upstream_ops *ops)
- {
- struct sfp_bus *bus = sfp_bus_get(fwnode);
-@@ -544,7 +541,6 @@ struct sfp_bus *sfp_register_upstream(st
- rtnl_lock();
- bus->upstream_ops = ops;
- bus->upstream = upstream;
-- bus->netdev = ndev;
-
- if (bus->sfp) {
- ret = sfp_register_bus(bus);
-@@ -670,7 +666,7 @@ struct sfp_bus *sfp_register_socket(stru
- bus->sfp = sfp;
- bus->socket_ops = ops;
-
-- if (bus->netdev) {
-+ if (bus->upstream_ops) {
- ret = sfp_register_bus(bus);
- if (ret)
- sfp_socket_clear(bus);
-@@ -690,7 +686,7 @@ EXPORT_SYMBOL_GPL(sfp_register_socket);
- void sfp_unregister_socket(struct sfp_bus *bus)
- {
- rtnl_lock();
-- if (bus->netdev)
-+ if (bus->upstream_ops)
- sfp_unregister_bus(bus);
- sfp_socket_clear(bus);
- rtnl_unlock();
---- a/include/linux/sfp.h
-+++ b/include/linux/sfp.h
-@@ -464,7 +464,6 @@ enum {
- struct fwnode_handle;
- struct ethtool_eeprom;
- struct ethtool_modinfo;
--struct net_device;
- struct sfp_bus;
-
- /**
-@@ -510,7 +509,7 @@ int sfp_get_module_eeprom(struct sfp_bus
- void sfp_upstream_start(struct sfp_bus *bus);
- void sfp_upstream_stop(struct sfp_bus *bus);
- struct sfp_bus *sfp_register_upstream(struct fwnode_handle *fwnode,
-- struct net_device *ndev, void *upstream,
-+ void *upstream,
- const struct sfp_upstream_ops *ops);
- void sfp_unregister_upstream(struct sfp_bus *bus);
- #else
-@@ -555,8 +554,7 @@ static inline void sfp_upstream_stop(str
- }
-
- static inline struct sfp_bus *sfp_register_upstream(
-- struct fwnode_handle *fwnode,
-- struct net_device *ndev, void *upstream,
-+ struct fwnode_handle *fwnode, void *upstream,
- const struct sfp_upstream_ops *ops)
- {
- return (struct sfp_bus *)-1;
+++ /dev/null
-From 8ac1d3e5cf7d277769ba3403d99f643fab1e3fae Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Sat, 23 Nov 2019 14:19:54 +0000
-Subject: [PATCH 611/660] net: phylink: avoid reducing support mask
-
-Avoid reducing the support mask as a result of the interface type
-selected for SFP modules, or when setting the link settings through
-ethtool - this should only change when the supported link modes of
-the hardware combination change.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/phylink.c | 13 +++++++++----
- 1 file changed, 9 insertions(+), 4 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -1137,6 +1137,7 @@ EXPORT_SYMBOL_GPL(phylink_ethtool_ksetti
- int phylink_ethtool_ksettings_set(struct phylink *pl,
- const struct ethtool_link_ksettings *kset)
- {
-+ __ETHTOOL_DECLARE_LINK_MODE_MASK(support);
- struct ethtool_link_ksettings our_kset;
- struct phylink_link_state config;
- int ret;
-@@ -1147,11 +1148,12 @@ int phylink_ethtool_ksettings_set(struct
- kset->base.autoneg != AUTONEG_ENABLE)
- return -EINVAL;
-
-+ linkmode_copy(support, pl->supported);
- config = pl->link_config;
-
- /* Mask out unsupported advertisements */
- linkmode_and(config.advertising, kset->link_modes.advertising,
-- pl->supported);
-+ support);
-
- /* FIXME: should we reject autoneg if phy/mac does not support it? */
- if (kset->base.autoneg == AUTONEG_DISABLE) {
-@@ -1161,7 +1163,7 @@ int phylink_ethtool_ksettings_set(struct
- * duplex.
- */
- s = phy_lookup_setting(kset->base.speed, kset->base.duplex,
-- pl->supported,
-+ support,
- __ETHTOOL_LINK_MODE_MASK_NBITS, false);
- if (!s)
- return -EINVAL;
-@@ -1191,7 +1193,7 @@ int phylink_ethtool_ksettings_set(struct
- __set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, config.advertising);
- }
-
-- if (phylink_validate(pl, pl->supported, &config))
-+ if (phylink_validate(pl, support, &config))
- return -EINVAL;
-
- /* If autonegotiation is enabled, we must have an advertisement */
-@@ -1633,6 +1635,7 @@ static int phylink_sfp_module_insert(voi
- {
- struct phylink *pl = upstream;
- __ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, };
-+ __ETHTOOL_DECLARE_LINK_MODE_MASK(support1);
- struct phylink_link_state config;
- phy_interface_t iface;
- int ret = 0;
-@@ -1660,6 +1663,8 @@ static int phylink_sfp_module_insert(voi
- return ret;
- }
-
-+ linkmode_copy(support1, support);
-+
- iface = sfp_select_interface(pl->sfp_bus, id, config.advertising);
- if (iface == PHY_INTERFACE_MODE_NA) {
- netdev_err(pl->netdev,
-@@ -1669,7 +1674,7 @@ static int phylink_sfp_module_insert(voi
- }
-
- config.interface = iface;
-- ret = phylink_validate(pl, support, &config);
-+ ret = phylink_validate(pl, support1, &config);
- if (ret) {
- netdev_err(pl->netdev, "validation of %s/%s with support %*pb failed: %d\n",
- phylink_an_mode_str(MLO_AN_INBAND),
+++ /dev/null
-From 254236a22109efa84c9e9f5a9c76a1719439e309 Mon Sep 17 00:00:00 2001
-From: Robert Hancock <hancock@sedsystems.ca>
-Date: Fri, 7 Jun 2019 10:42:35 -0600
-Subject: [PATCH 612/660] net: sfp: Stop SFP polling and interrupt handling
- during shutdown
-
-SFP device polling can cause problems during the shutdown process if the
-parent devices of the network controller have been shut down already.
-This problem was seen on the iMX6 platform with PCIe devices, where
-accessing the device after the bus is shut down causes a hang.
-
-Free any acquired GPIO interrupts and stop all delayed work in the SFP
-driver during the shutdown process, so that we ensure that no pending
-operations are still occurring after the SFP shutdown completes.
-
-Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/sfp.c | 31 ++++++++++++++++++++++++++-----
- 1 file changed, 26 insertions(+), 5 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -183,6 +183,7 @@ struct sfp {
- int (*write)(struct sfp *, bool, u8, void *, size_t);
-
- struct gpio_desc *gpio[GPIO_MAX];
-+ int gpio_irq[GPIO_MAX];
-
- bool attached;
- struct mutex st_mutex; /* Protects state */
-@@ -1803,7 +1804,7 @@ static int sfp_probe(struct platform_dev
- const struct sff_data *sff;
- struct sfp *sfp;
- bool poll = false;
-- int irq, err, i;
-+ int err, i;
-
- sfp = sfp_alloc(&pdev->dev);
- if (IS_ERR(sfp))
-@@ -1885,19 +1886,22 @@ static int sfp_probe(struct platform_dev
- if (gpio_flags[i] != GPIOD_IN || !sfp->gpio[i])
- continue;
-
-- irq = gpiod_to_irq(sfp->gpio[i]);
-- if (!irq) {
-+ sfp->gpio_irq[i] = gpiod_to_irq(sfp->gpio[i]);
-+ if (!sfp->gpio_irq[i]) {
- poll = true;
- continue;
- }
-
-- err = devm_request_threaded_irq(sfp->dev, irq, NULL, sfp_irq,
-+ err = devm_request_threaded_irq(sfp->dev, sfp->gpio_irq[i],
-+ NULL, sfp_irq,
- IRQF_ONESHOT |
- IRQF_TRIGGER_RISING |
- IRQF_TRIGGER_FALLING,
- dev_name(sfp->dev), sfp);
-- if (err)
-+ if (err) {
-+ sfp->gpio_irq[i] = 0;
- poll = true;
-+ }
- }
-
- if (poll)
-@@ -1928,9 +1932,26 @@ static int sfp_remove(struct platform_de
- return 0;
- }
-
-+static void sfp_shutdown(struct platform_device *pdev)
-+{
-+ struct sfp *sfp = platform_get_drvdata(pdev);
-+ int i;
-+
-+ for (i = 0; i < GPIO_MAX; i++) {
-+ if (!sfp->gpio_irq[i])
-+ continue;
-+
-+ devm_free_irq(sfp->dev, sfp->gpio_irq[i], sfp);
-+ }
-+
-+ cancel_delayed_work_sync(&sfp->poll);
-+ cancel_delayed_work_sync(&sfp->timeout);
-+}
-+
- static struct platform_driver sfp_driver = {
- .probe = sfp_probe,
- .remove = sfp_remove,
-+ .shutdown = sfp_shutdown,
- .driver = {
- .name = "sfp",
- .of_match_table = sfp_of_match,
+++ /dev/null
-From b8803113537a1c1f457eba6270d46e3af305031f Mon Sep 17 00:00:00 2001
-From: Arseny Solokha <asolokha@kb.kras.ru>
-Date: Wed, 24 Jul 2019 20:31:39 +0700
-Subject: [PATCH 613/660] net: phylink: don't start and stop SGMII PHYs in SFP
- modules twice
-
-SFP modules connected using the SGMII interface have their own PHYs which
-are handled by the struct phylink's phydev field. On the other hand, for
-the modules connected using 1000Base-X interface that field is not set.
-
-Since commit ce0aa27ff3f6 ("sfp: add sfp-bus to bridge between network
-devices and sfp cages") phylink_start() ends up setting the phydev field
-using the sfp-bus infrastructure, which eventually calls phy_start() on it,
-and then calling phy_start() again on the same phydev from phylink_start()
-itself. Similar call sequence holds for phylink_stop(), only in the reverse
-order. This results in WARNs during network interface bringup and shutdown
-when a copper SFP module is connected, as phy_start() and phy_stop() are
-called twice in a row for the same phy_device:
-
- % ip link set up dev eth0
- ------------[ cut here ]------------
- called from state UP
- WARNING: CPU: 1 PID: 155 at drivers/net/phy/phy.c:895 phy_start+0x74/0xc0
- Modules linked in:
- CPU: 1 PID: 155 Comm: backend Not tainted 5.2.0+ #1
- NIP: c0227bf0 LR: c0227bf0 CTR: c004d224
- REGS: df547720 TRAP: 0700 Not tainted (5.2.0+)
- MSR: 00029000 <CE,EE,ME> CR: 24002822 XER: 00000000
-
- GPR00: c0227bf0 df5477d8 df5d7080 00000014 df9d2370 df9d5ac4 1f4eb000 00000001
- GPR08: c061fe58 00000000 00000000 df5477d8 0000003c 100c8768 00000000 00000000
- GPR16: df486a00 c046f1c8 c046eea0 00000000 c046e904 c0239604 db68449c 00000000
- GPR24: e9083204 00000000 00000001 db684460 e9083404 00000000 db6dce00 db6dcc00
- NIP [c0227bf0] phy_start+0x74/0xc0
- LR [c0227bf0] phy_start+0x74/0xc0
- Call Trace:
- [df5477d8] [c0227bf0] phy_start+0x74/0xc0 (unreliable)
- [df5477e8] [c023cad0] startup_gfar+0x398/0x3f4
- [df547828] [c023cf08] gfar_enet_open+0x364/0x374
- [df547898] [c029d870] __dev_open+0xe4/0x140
- [df5478c8] [c029db70] __dev_change_flags+0xf0/0x188
- [df5478f8] [c029dc28] dev_change_flags+0x20/0x54
- [df547918] [c02ae304] do_setlink+0x310/0x818
- [df547a08] [c02b1eb8] __rtnl_newlink+0x384/0x6b0
- [df547c28] [c02b222c] rtnl_newlink+0x48/0x68
- [df547c48] [c02ad7c8] rtnetlink_rcv_msg+0x240/0x27c
- [df547c98] [c02cc068] netlink_rcv_skb+0x8c/0xf0
- [df547cd8] [c02cba3c] netlink_unicast+0x114/0x19c
- [df547d08] [c02cbd74] netlink_sendmsg+0x2b0/0x2c0
- [df547d58] [c027b668] sock_sendmsg_nosec+0x20/0x40
- [df547d68] [c027d080] ___sys_sendmsg+0x17c/0x1dc
- [df547e98] [c027df7c] __sys_sendmsg+0x68/0x84
- [df547ef8] [c027e430] sys_socketcall+0x1a0/0x204
- [df547f38] [c000d1d8] ret_from_syscall+0x0/0x38
- --- interrupt: c01 at 0xfd4e030
- LR = 0xfd4e010
- Instruction dump:
- 813f0188 38800000 2b890005 419d0014 3d40c046 5529103a 394aa208 7c8a482e
- 3c60c046 3863a1b8 4cc63182 4be009a1 <0fe00000> 48000030 3c60c046 3863a1d0
- ---[ end trace d4c095aeaf6ea998 ]---
-
-and
-
- % ip link set down dev eth0
- ------------[ cut here ]------------
- called from state HALTED
- WARNING: CPU: 1 PID: 184 at drivers/net/phy/phy.c:858 phy_stop+0x3c/0x88
-
- <...>
-
- Call Trace:
- [df581788] [c0228450] phy_stop+0x3c/0x88 (unreliable)
- [df581798] [c022d548] sfp_sm_phy_detach+0x1c/0x44
- [df5817a8] [c022e8cc] sfp_sm_event+0x4b0/0x87c
- [df581848] [c022f04c] sfp_upstream_stop+0x34/0x44
- [df581858] [c0225608] phylink_stop+0x7c/0xe4
- [df581868] [c023c57c] stop_gfar+0x7c/0x94
- [df581888] [c023c5b8] gfar_close+0x24/0x94
- [df5818a8] [c0298688] __dev_close_many+0xdc/0xf8
- [df5818c8] [c029db58] __dev_change_flags+0xd8/0x188
- [df5818f8] [c029dc28] dev_change_flags+0x20/0x54
- [df581918] [c02ae304] do_setlink+0x310/0x818
- [df581a08] [c02b1eb8] __rtnl_newlink+0x384/0x6b0
- [df581c28] [c02b222c] rtnl_newlink+0x48/0x68
- [df581c48] [c02ad7c8] rtnetlink_rcv_msg+0x240/0x27c
- [df581c98] [c02cc068] netlink_rcv_skb+0x8c/0xf0
- [df581cd8] [c02cba3c] netlink_unicast+0x114/0x19c
- [df581d08] [c02cbd74] netlink_sendmsg+0x2b0/0x2c0
- [df581d58] [c027b668] sock_sendmsg_nosec+0x20/0x40
- [df581d68] [c027d080] ___sys_sendmsg+0x17c/0x1dc
- [df581e98] [c027df7c] __sys_sendmsg+0x68/0x84
- [df581ef8] [c027e430] sys_socketcall+0x1a0/0x204
- [df581f38] [c000d1d8] ret_from_syscall+0x0/0x38
-
- <...>
-
- ---[ end trace d4c095aeaf6ea999 ]---
-
-SFP modules with the 1000Base-X interface are not affected.
-
-Place explicit calls to phy_start() and phy_stop() before enabling or after
-disabling an attached SFP module, where phydev is not yet set (or is
-already unset), so they will be made only from the inside of sfp-bus, if
-needed.
-
-Fixes: 217962615662 ("net: phy: warn if phy_start is called from invalid state")
-Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru>
-Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/phy/phylink.c | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -973,10 +973,10 @@ void phylink_start(struct phylink *pl)
- }
- if (pl->link_an_mode == MLO_AN_FIXED && pl->get_fixed_state)
- mod_timer(&pl->link_poll, jiffies + HZ);
-- if (pl->sfp_bus)
-- sfp_upstream_start(pl->sfp_bus);
- if (pl->phydev)
- phy_start(pl->phydev);
-+ if (pl->sfp_bus)
-+ sfp_upstream_start(pl->sfp_bus);
- }
- EXPORT_SYMBOL_GPL(phylink_start);
-
-@@ -993,10 +993,10 @@ void phylink_stop(struct phylink *pl)
- {
- ASSERT_RTNL();
-
-- if (pl->phydev)
-- phy_stop(pl->phydev);
- if (pl->sfp_bus)
- sfp_upstream_stop(pl->sfp_bus);
-+ if (pl->phydev)
-+ phy_stop(pl->phydev);
- del_timer_sync(&pl->link_poll);
- if (pl->link_irq) {
- free_irq(pl->link_irq, pl);
+++ /dev/null
-From 4054955f0da08c81d42220cb445820d474f1ac92 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Sat, 14 Sep 2019 14:21:22 +0100
-Subject: [PATCH 614/660] net: sfp: move fwnode parsing into sfp-bus layer
-
-Rather than parsing the sfp firmware node in phylink, parse it in the
-sfp-bus code, so we can re-use this code for PHYs without having to
-duplicate the parsing.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/phylink.c | 21 ++++---------
- drivers/net/phy/sfp-bus.c | 65 +++++++++++++++++++++++++--------------
- include/linux/sfp.h | 10 +++---
- 3 files changed, 53 insertions(+), 43 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -538,26 +538,17 @@ static const struct sfp_upstream_ops sfp
- static int phylink_register_sfp(struct phylink *pl,
- struct fwnode_handle *fwnode)
- {
-- struct fwnode_reference_args ref;
-+ struct sfp_bus *bus;
- int ret;
-
-- if (!fwnode)
-- return 0;
--
-- ret = fwnode_property_get_reference_args(fwnode, "sfp", NULL,
-- 0, 0, &ref);
-- if (ret < 0) {
-- if (ret == -ENOENT)
-- return 0;
--
-- netdev_err(pl->netdev, "unable to parse \"sfp\" node: %d\n",
-- ret);
-+ bus = sfp_register_upstream_node(fwnode, pl, &sfp_phylink_ops);
-+ if (IS_ERR(bus)) {
-+ ret = PTR_ERR(bus);
-+ netdev_err(pl->netdev, "unable to attach SFP bus: %d\n", ret);
- return ret;
- }
-
-- pl->sfp_bus = sfp_register_upstream(ref.fwnode, pl, &sfp_phylink_ops);
-- if (!pl->sfp_bus)
-- return -ENOMEM;
-+ pl->sfp_bus = bus;
-
- return 0;
- }
---- a/drivers/net/phy/sfp-bus.c
-+++ b/drivers/net/phy/sfp-bus.c
-@@ -3,6 +3,7 @@
- #include <linux/list.h>
- #include <linux/mutex.h>
- #include <linux/phylink.h>
-+#include <linux/property.h>
- #include <linux/rtnetlink.h>
- #include <linux/slab.h>
-
-@@ -519,45 +520,63 @@ static void sfp_upstream_clear(struct sf
- }
-
- /**
-- * sfp_register_upstream() - Register the neighbouring device
-- * @fwnode: firmware node for the SFP bus
-+ * sfp_register_upstream_node() - parse and register the neighbouring device
-+ * @fwnode: firmware node for the parent device (MAC or PHY)
- * @upstream: the upstream private data
- * @ops: the upstream's &struct sfp_upstream_ops
- *
-- * Register the upstream device (eg, PHY) with the SFP bus. MAC drivers
-- * should use phylink, which will call this function for them. Returns
-- * a pointer to the allocated &struct sfp_bus.
-+ * Parse the parent device's firmware node for a SFP bus, and register the
-+ * SFP bus using sfp_register_upstream().
- *
-- * On error, returns %NULL.
-+ * Returns: on success, a pointer to the sfp_bus structure,
-+ * %NULL if no SFP is specified,
-+ * on failure, an error pointer value:
-+ * corresponding to the errors detailed for
-+ * fwnode_property_get_reference_args().
-+ * %-ENOMEM if we failed to allocate the bus.
-+ * an error from the upstream's connect_phy() method.
- */
--struct sfp_bus *sfp_register_upstream(struct fwnode_handle *fwnode,
-- void *upstream,
-- const struct sfp_upstream_ops *ops)
--{
-- struct sfp_bus *bus = sfp_bus_get(fwnode);
-- int ret = 0;
--
-- if (bus) {
-- rtnl_lock();
-- bus->upstream_ops = ops;
-- bus->upstream = upstream;
-+struct sfp_bus *sfp_register_upstream_node(struct fwnode_handle *fwnode,
-+ void *upstream,
-+ const struct sfp_upstream_ops *ops)
-+{
-+ struct fwnode_reference_args ref;
-+ struct sfp_bus *bus;
-+ int ret;
-
-- if (bus->sfp) {
-- ret = sfp_register_bus(bus);
-- if (ret)
-- sfp_upstream_clear(bus);
-- }
-- rtnl_unlock();
-+ ret = fwnode_property_get_reference_args(fwnode, "sfp", NULL,
-+ 0, 0, &ref);
-+ if (ret == -ENOENT)
-+ return NULL;
-+ else if (ret < 0)
-+ return ERR_PTR(ret);
-+
-+ bus = sfp_bus_get(ref.fwnode);
-+ fwnode_handle_put(ref.fwnode);
-+ if (!bus)
-+ return ERR_PTR(-ENOMEM);
-+
-+ rtnl_lock();
-+ bus->upstream_ops = ops;
-+ bus->upstream = upstream;
-+
-+ if (bus->sfp) {
-+ ret = sfp_register_bus(bus);
-+ if (ret)
-+ sfp_upstream_clear(bus);
-+ } else {
-+ ret = 0;
- }
-+ rtnl_unlock();
-
- if (ret) {
- sfp_bus_put(bus);
-- bus = NULL;
-+ bus = ERR_PTR(ret);
- }
-
- return bus;
- }
--EXPORT_SYMBOL_GPL(sfp_register_upstream);
-+EXPORT_SYMBOL_GPL(sfp_register_upstream_node);
-
- /**
- * sfp_unregister_upstream() - Unregister sfp bus
---- a/include/linux/sfp.h
-+++ b/include/linux/sfp.h
-@@ -508,9 +508,9 @@ int sfp_get_module_eeprom(struct sfp_bus
- u8 *data);
- void sfp_upstream_start(struct sfp_bus *bus);
- void sfp_upstream_stop(struct sfp_bus *bus);
--struct sfp_bus *sfp_register_upstream(struct fwnode_handle *fwnode,
-- void *upstream,
-- const struct sfp_upstream_ops *ops);
-+struct sfp_bus *sfp_register_upstream_node(struct fwnode_handle *fwnode,
-+ void *upstream,
-+ const struct sfp_upstream_ops *ops);
- void sfp_unregister_upstream(struct sfp_bus *bus);
- #else
- static inline int sfp_parse_port(struct sfp_bus *bus,
-@@ -553,11 +553,11 @@ static inline void sfp_upstream_stop(str
- {
- }
-
--static inline struct sfp_bus *sfp_register_upstream(
-+static inline struct sfp_bus *sfp_register_upstream_node(
- struct fwnode_handle *fwnode, void *upstream,
- const struct sfp_upstream_ops *ops)
- {
-- return (struct sfp_bus *)-1;
-+ return NULL;
- }
-
- static inline void sfp_unregister_upstream(struct sfp_bus *bus)
+++ /dev/null
-From 863b5b6941f9f43b924393b6ba2b36647e7dee42 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Thu, 7 Nov 2019 17:06:08 +0000
-Subject: [PATCH 615/660] net: sfp: rework upstream interface
-
-The current upstream interface is an all-or-nothing, which is
-sub-optimal for future changes, as it doesn't allow the upstream driver
-to prepare for the SFP module becoming available, as it is at boot.
-
-Switch to a find-sfp-bus, add-upstream, del-upstream, put-sfp-bus
-interface structure instead, which allows the upstream driver to
-prepare for a module being available as soon as add-upstream is called.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/phylink.c | 10 +++--
- drivers/net/phy/sfp-bus.c | 92 +++++++++++++++++++++++++++------------
- include/linux/sfp.h | 25 +++++++----
- 3 files changed, 88 insertions(+), 39 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -541,7 +541,7 @@ static int phylink_register_sfp(struct p
- struct sfp_bus *bus;
- int ret;
-
-- bus = sfp_register_upstream_node(fwnode, pl, &sfp_phylink_ops);
-+ bus = sfp_bus_find_fwnode(fwnode);
- if (IS_ERR(bus)) {
- ret = PTR_ERR(bus);
- netdev_err(pl->netdev, "unable to attach SFP bus: %d\n", ret);
-@@ -550,7 +550,10 @@ static int phylink_register_sfp(struct p
-
- pl->sfp_bus = bus;
-
-- return 0;
-+ ret = sfp_bus_add_upstream(bus, pl, &sfp_phylink_ops);
-+ sfp_bus_put(bus);
-+
-+ return ret;
- }
-
- /**
-@@ -634,8 +637,7 @@ EXPORT_SYMBOL_GPL(phylink_create);
- */
- void phylink_destroy(struct phylink *pl)
- {
-- if (pl->sfp_bus)
-- sfp_unregister_upstream(pl->sfp_bus);
-+ sfp_bus_del_upstream(pl->sfp_bus);
- if (pl->link_gpio)
- gpiod_put(pl->link_gpio);
-
---- a/drivers/net/phy/sfp-bus.c
-+++ b/drivers/net/phy/sfp-bus.c
-@@ -403,10 +403,19 @@ static void sfp_bus_release(struct kref
- kfree(bus);
- }
-
--static void sfp_bus_put(struct sfp_bus *bus)
-+/**
-+ * sfp_bus_put() - put a reference on the &struct sfp_bus
-+ * bus: the &struct sfp_bus found via sfp_bus_find_fwnode()
-+ *
-+ * Put a reference on the &struct sfp_bus and free the underlying structure
-+ * if this was the last reference.
-+ */
-+void sfp_bus_put(struct sfp_bus *bus)
- {
-- kref_put_mutex(&bus->kref, sfp_bus_release, &sfp_mutex);
-+ if (bus)
-+ kref_put_mutex(&bus->kref, sfp_bus_release, &sfp_mutex);
- }
-+EXPORT_SYMBOL_GPL(sfp_bus_put);
-
- static int sfp_register_bus(struct sfp_bus *bus)
- {
-@@ -422,11 +431,11 @@ static int sfp_register_bus(struct sfp_b
- return ret;
- }
- }
-+ bus->registered = true;
- bus->socket_ops->attach(bus->sfp);
- if (bus->started)
- bus->socket_ops->start(bus->sfp);
- bus->upstream_ops->attach(bus->upstream, bus);
-- bus->registered = true;
- return 0;
- }
-
-@@ -520,13 +529,12 @@ static void sfp_upstream_clear(struct sf
- }
-
- /**
-- * sfp_register_upstream_node() - parse and register the neighbouring device
-+ * sfp_bus_find_fwnode() - parse and locate the SFP bus from fwnode
- * @fwnode: firmware node for the parent device (MAC or PHY)
-- * @upstream: the upstream private data
-- * @ops: the upstream's &struct sfp_upstream_ops
- *
-- * Parse the parent device's firmware node for a SFP bus, and register the
-- * SFP bus using sfp_register_upstream().
-+ * Parse the parent device's firmware node for a SFP bus, and locate
-+ * the sfp_bus structure, incrementing its reference count. This must
-+ * be put via sfp_bus_put() when done.
- *
- * Returns: on success, a pointer to the sfp_bus structure,
- * %NULL if no SFP is specified,
-@@ -536,9 +544,7 @@ static void sfp_upstream_clear(struct sf
- * %-ENOMEM if we failed to allocate the bus.
- * an error from the upstream's connect_phy() method.
- */
--struct sfp_bus *sfp_register_upstream_node(struct fwnode_handle *fwnode,
-- void *upstream,
-- const struct sfp_upstream_ops *ops)
-+struct sfp_bus *sfp_bus_find_fwnode(struct fwnode_handle *fwnode)
- {
- struct fwnode_reference_args ref;
- struct sfp_bus *bus;
-@@ -556,7 +562,39 @@ struct sfp_bus *sfp_register_upstream_no
- if (!bus)
- return ERR_PTR(-ENOMEM);
-
-+ return bus;
-+}
-+EXPORT_SYMBOL_GPL(sfp_bus_find_fwnode);
-+
-+/**
-+ * sfp_bus_add_upstream() - parse and register the neighbouring device
-+ * @bus: the &struct sfp_bus found via sfp_bus_find_fwnode()
-+ * @upstream: the upstream private data
-+ * @ops: the upstream's &struct sfp_upstream_ops
-+ *
-+ * Add upstream driver for the SFP bus, and if the bus is complete, register
-+ * the SFP bus using sfp_register_upstream(). This takes a reference on the
-+ * bus, so it is safe to put the bus after this call.
-+ *
-+ * Returns: on success, a pointer to the sfp_bus structure,
-+ * %NULL if no SFP is specified,
-+ * on failure, an error pointer value:
-+ * corresponding to the errors detailed for
-+ * fwnode_property_get_reference_args().
-+ * %-ENOMEM if we failed to allocate the bus.
-+ * an error from the upstream's connect_phy() method.
-+ */
-+int sfp_bus_add_upstream(struct sfp_bus *bus, void *upstream,
-+ const struct sfp_upstream_ops *ops)
-+{
-+ int ret;
-+
-+ /* If no bus, return success */
-+ if (!bus)
-+ return 0;
-+
- rtnl_lock();
-+ kref_get(&bus->kref);
- bus->upstream_ops = ops;
- bus->upstream = upstream;
-
-@@ -569,33 +607,33 @@ struct sfp_bus *sfp_register_upstream_no
- }
- rtnl_unlock();
-
-- if (ret) {
-+ if (ret)
- sfp_bus_put(bus);
-- bus = ERR_PTR(ret);
-- }
-
-- return bus;
-+ return ret;
- }
--EXPORT_SYMBOL_GPL(sfp_register_upstream_node);
-+EXPORT_SYMBOL_GPL(sfp_bus_add_upstream);
-
- /**
-- * sfp_unregister_upstream() - Unregister sfp bus
-+ * sfp_bus_del_upstream() - Delete a sfp bus
- * @bus: a pointer to the &struct sfp_bus structure for the sfp module
- *
-- * Unregister a previously registered upstream connection for the SFP
-- * module. @bus is returned from sfp_register_upstream().
-+ * Delete a previously registered upstream connection for the SFP
-+ * module. @bus should have been added by sfp_bus_add_upstream().
- */
--void sfp_unregister_upstream(struct sfp_bus *bus)
-+void sfp_bus_del_upstream(struct sfp_bus *bus)
- {
-- rtnl_lock();
-- if (bus->sfp)
-- sfp_unregister_bus(bus);
-- sfp_upstream_clear(bus);
-- rtnl_unlock();
-+ if (bus) {
-+ rtnl_lock();
-+ if (bus->sfp)
-+ sfp_unregister_bus(bus);
-+ sfp_upstream_clear(bus);
-+ rtnl_unlock();
-
-- sfp_bus_put(bus);
-+ sfp_bus_put(bus);
-+ }
- }
--EXPORT_SYMBOL_GPL(sfp_unregister_upstream);
-+EXPORT_SYMBOL_GPL(sfp_bus_del_upstream);
-
- /* Socket driver entry points */
- int sfp_add_phy(struct sfp_bus *bus, struct phy_device *phydev)
---- a/include/linux/sfp.h
-+++ b/include/linux/sfp.h
-@@ -508,10 +508,11 @@ int sfp_get_module_eeprom(struct sfp_bus
- u8 *data);
- void sfp_upstream_start(struct sfp_bus *bus);
- void sfp_upstream_stop(struct sfp_bus *bus);
--struct sfp_bus *sfp_register_upstream_node(struct fwnode_handle *fwnode,
-- void *upstream,
-- const struct sfp_upstream_ops *ops);
--void sfp_unregister_upstream(struct sfp_bus *bus);
-+void sfp_bus_put(struct sfp_bus *bus);
-+struct sfp_bus *sfp_bus_find_fwnode(struct fwnode_handle *fwnode);
-+int sfp_bus_add_upstream(struct sfp_bus *bus, void *upstream,
-+ const struct sfp_upstream_ops *ops);
-+void sfp_bus_del_upstream(struct sfp_bus *bus);
- #else
- static inline int sfp_parse_port(struct sfp_bus *bus,
- const struct sfp_eeprom_id *id,
-@@ -553,14 +554,22 @@ static inline void sfp_upstream_stop(str
- {
- }
-
--static inline struct sfp_bus *sfp_register_upstream_node(
-- struct fwnode_handle *fwnode, void *upstream,
-- const struct sfp_upstream_ops *ops)
-+static inline void sfp_bus_put(struct sfp_bus *bus)
-+{
-+}
-+
-+static inline struct sfp_bus *sfp_bus_find_fwnode(struct fwnode_handle *fwnode)
- {
- return NULL;
- }
-
--static inline void sfp_unregister_upstream(struct sfp_bus *bus)
-+static int sfp_bus_add_upstream(struct sfp_bus *bus, void *upstream,
-+ const struct sfp_upstream_ops *ops)
-+{
-+ return 0;
-+}
-+
-+static inline void sfp_bus_del_upstream(struct sfp_bus *bus)
- {
- }
- #endif
+++ /dev/null
-From ea7bfd81921827d334c2a23bd11ef0e4e2abafd2 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Sat, 9 Nov 2019 08:13:50 +0000
-Subject: [PATCH 616/660] net: sfp: fix sfp_bus_put() kernel documentation
-
-The kbuild test robot found a problem with htmldocs with the recent
-change to the SFP interfaces. Fix the kernel documentation for
-sfp_bus_put() which was missing an '@' before the argument name
-description.
-
-Fixes: 727b3668b730 ("net: sfp: rework upstream interface")
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp-bus.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/phy/sfp-bus.c
-+++ b/drivers/net/phy/sfp-bus.c
-@@ -405,7 +405,7 @@ static void sfp_bus_release(struct kref
-
- /**
- * sfp_bus_put() - put a reference on the &struct sfp_bus
-- * bus: the &struct sfp_bus found via sfp_bus_find_fwnode()
-+ * @bus: the &struct sfp_bus found via sfp_bus_find_fwnode()
- *
- * Put a reference on the &struct sfp_bus and free the underlying structure
- * if this was the last reference.
+++ /dev/null
-From f76d84cd85f8bd3f083495f7ca723822cba8abc9 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Mon, 11 Nov 2019 10:23:35 +0000
-Subject: [PATCH 617/660] net: sfp: fix sfp_bus_add_upstream() warning
-
-When building with SFP disabled, the stub for sfp_bus_add_upstream()
-missed "inline". Add it.
-
-Fixes: 727b3668b730 ("net: sfp: rework upstream interface")
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- include/linux/sfp.h | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/include/linux/sfp.h
-+++ b/include/linux/sfp.h
-@@ -563,8 +563,8 @@ static inline struct sfp_bus *sfp_bus_fi
- return NULL;
- }
-
--static int sfp_bus_add_upstream(struct sfp_bus *bus, void *upstream,
-- const struct sfp_upstream_ops *ops)
-+static inline int sfp_bus_add_upstream(struct sfp_bus *bus, void *upstream,
-+ const struct sfp_upstream_ops *ops)
- {
- return 0;
- }
+++ /dev/null
-From b9d6ed5cdb67533feda7f221eb06f2f9f1ff5047 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 11 Oct 2019 19:33:58 +0100
-Subject: [PATCH 618/660] net: sfp: move sfp sub-state machines into separate
- functions
-
-Move the SFP sub-state machines out of the main state machine function,
-in preparation for it doing a bit more with the device state. By doing
-so, we ensure that our debug after the main state machine is always
-printed.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 74 +++++++++++++++++++++++++------------------
- 1 file changed, 43 insertions(+), 31 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -1479,19 +1479,34 @@ static void sfp_sm_mod_remove(struct sfp
- dev_info(sfp->dev, "module removed\n");
- }
-
--static void sfp_sm_event(struct sfp *sfp, unsigned int event)
-+/* This state machine tracks the netdev up/down state */
-+static void sfp_sm_device(struct sfp *sfp, unsigned int event)
- {
-- mutex_lock(&sfp->sm_mutex);
-+ switch (sfp->sm_dev_state) {
-+ default:
-+ if (event == SFP_E_DEV_UP)
-+ sfp->sm_dev_state = SFP_DEV_UP;
-+ break;
-
-- dev_dbg(sfp->dev, "SM: enter %s:%s:%s event %s\n",
-- mod_state_to_str(sfp->sm_mod_state),
-- dev_state_to_str(sfp->sm_dev_state),
-- sm_state_to_str(sfp->sm_state),
-- event_to_str(event));
-+ case SFP_DEV_UP:
-+ if (event == SFP_E_DEV_DOWN) {
-+ /* If the module has a PHY, avoid raising TX disable
-+ * as this resets the PHY. Otherwise, raise it to
-+ * turn the laser off.
-+ */
-+ if (!sfp->mod_phy)
-+ sfp_module_tx_disable(sfp);
-+ sfp->sm_dev_state = SFP_DEV_DOWN;
-+ }
-+ break;
-+ }
-+}
-
-- /* This state machine tracks the insert/remove state of
-- * the module, and handles probing the on-board EEPROM.
-- */
-+/* This state machine tracks the insert/remove state of
-+ * the module, and handles probing the on-board EEPROM.
-+ */
-+static void sfp_sm_module(struct sfp *sfp, unsigned int event)
-+{
- switch (sfp->sm_mod_state) {
- default:
- if (event == SFP_E_INSERT && sfp->attached) {
-@@ -1531,27 +1546,10 @@ static void sfp_sm_event(struct sfp *sfp
- }
- break;
- }
-+}
-
-- /* This state machine tracks the netdev up/down state */
-- switch (sfp->sm_dev_state) {
-- default:
-- if (event == SFP_E_DEV_UP)
-- sfp->sm_dev_state = SFP_DEV_UP;
-- break;
--
-- case SFP_DEV_UP:
-- if (event == SFP_E_DEV_DOWN) {
-- /* If the module has a PHY, avoid raising TX disable
-- * as this resets the PHY. Otherwise, raise it to
-- * turn the laser off.
-- */
-- if (!sfp->mod_phy)
-- sfp_module_tx_disable(sfp);
-- sfp->sm_dev_state = SFP_DEV_DOWN;
-- }
-- break;
-- }
--
-+static void sfp_sm_main(struct sfp *sfp, unsigned int event)
-+{
- /* Some events are global */
- if (sfp->sm_state != SFP_S_DOWN &&
- (sfp->sm_mod_state != SFP_MOD_PRESENT ||
-@@ -1562,7 +1560,6 @@ static void sfp_sm_event(struct sfp *sfp
- if (sfp->mod_phy)
- sfp_sm_phy_detach(sfp);
- sfp_sm_next(sfp, SFP_S_DOWN, 0);
-- mutex_unlock(&sfp->sm_mutex);
- return;
- }
-
-@@ -1617,6 +1614,21 @@ static void sfp_sm_event(struct sfp *sfp
- case SFP_S_TX_DISABLE:
- break;
- }
-+}
-+
-+static void sfp_sm_event(struct sfp *sfp, unsigned int event)
-+{
-+ mutex_lock(&sfp->sm_mutex);
-+
-+ dev_dbg(sfp->dev, "SM: enter %s:%s:%s event %s\n",
-+ mod_state_to_str(sfp->sm_mod_state),
-+ dev_state_to_str(sfp->sm_dev_state),
-+ sm_state_to_str(sfp->sm_state),
-+ event_to_str(event));
-+
-+ sfp_sm_module(sfp, event);
-+ sfp_sm_device(sfp, event);
-+ sfp_sm_main(sfp, event);
-
- dev_dbg(sfp->dev, "SM: exit %s:%s:%s\n",
- mod_state_to_str(sfp->sm_mod_state),
+++ /dev/null
-From 7e89b737c97a9e7a81dd1584000bc136b92f12fd Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 11 Oct 2019 22:14:47 +0100
-Subject: [PATCH 619/660] net: sfp: move tx disable on device down to main
- state machine
-
-Move the tx disable assertion on device down to the main state
-machine.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 10 ++--------
- 1 file changed, 2 insertions(+), 8 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -1489,15 +1489,8 @@ static void sfp_sm_device(struct sfp *sf
- break;
-
- case SFP_DEV_UP:
-- if (event == SFP_E_DEV_DOWN) {
-- /* If the module has a PHY, avoid raising TX disable
-- * as this resets the PHY. Otherwise, raise it to
-- * turn the laser off.
-- */
-- if (!sfp->mod_phy)
-- sfp_module_tx_disable(sfp);
-+ if (event == SFP_E_DEV_DOWN)
- sfp->sm_dev_state = SFP_DEV_DOWN;
-- }
- break;
- }
- }
-@@ -1559,6 +1552,7 @@ static void sfp_sm_main(struct sfp *sfp,
- sfp_sm_link_down(sfp);
- if (sfp->mod_phy)
- sfp_sm_phy_detach(sfp);
-+ sfp_module_tx_disable(sfp);
- sfp_sm_next(sfp, SFP_S_DOWN, 0);
- return;
- }
+++ /dev/null
-From f2a1ccfc4ad4f97c98c3cc18eb32992151ce089a Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 11 Oct 2019 22:27:21 +0100
-Subject: [PATCH 620/660] net: sfp: rename sfp_sm_ins_next() as
- sfp_sm_mod_next()
-
-sfp_sm_ins_next() modifies the module state machine. Change it's name
-to reflect this.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 16 ++++++++--------
- 1 file changed, 8 insertions(+), 8 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -1180,7 +1180,7 @@ static void sfp_sm_next(struct sfp *sfp,
- sfp_sm_set_timer(sfp, timeout);
- }
-
--static void sfp_sm_ins_next(struct sfp *sfp, unsigned int state,
-+static void sfp_sm_mod_next(struct sfp *sfp, unsigned int state,
- unsigned int timeout)
- {
- sfp->sm_mod_state = state;
-@@ -1504,22 +1504,22 @@ static void sfp_sm_module(struct sfp *sf
- default:
- if (event == SFP_E_INSERT && sfp->attached) {
- sfp_module_tx_disable(sfp);
-- sfp_sm_ins_next(sfp, SFP_MOD_PROBE, T_PROBE_INIT);
-+ sfp_sm_mod_next(sfp, SFP_MOD_PROBE, T_PROBE_INIT);
- }
- break;
-
- case SFP_MOD_PROBE:
- if (event == SFP_E_REMOVE) {
-- sfp_sm_ins_next(sfp, SFP_MOD_EMPTY, 0);
-+ sfp_sm_mod_next(sfp, SFP_MOD_EMPTY, 0);
- } else if (event == SFP_E_TIMEOUT) {
- int val = sfp_sm_mod_probe(sfp);
-
- if (val == 0)
-- sfp_sm_ins_next(sfp, SFP_MOD_PRESENT, 0);
-+ sfp_sm_mod_next(sfp, SFP_MOD_PRESENT, 0);
- else if (val > 0)
-- sfp_sm_ins_next(sfp, SFP_MOD_HPOWER, val);
-+ sfp_sm_mod_next(sfp, SFP_MOD_HPOWER, val);
- else if (val != -EAGAIN)
-- sfp_sm_ins_next(sfp, SFP_MOD_ERROR, 0);
-+ sfp_sm_mod_next(sfp, SFP_MOD_ERROR, 0);
- else
- sfp_sm_set_timer(sfp, T_PROBE_RETRY);
- }
-@@ -1527,7 +1527,7 @@ static void sfp_sm_module(struct sfp *sf
-
- case SFP_MOD_HPOWER:
- if (event == SFP_E_TIMEOUT) {
-- sfp_sm_ins_next(sfp, SFP_MOD_PRESENT, 0);
-+ sfp_sm_mod_next(sfp, SFP_MOD_PRESENT, 0);
- break;
- }
- /* fallthrough */
-@@ -1535,7 +1535,7 @@ static void sfp_sm_module(struct sfp *sf
- case SFP_MOD_ERROR:
- if (event == SFP_E_REMOVE) {
- sfp_sm_mod_remove(sfp);
-- sfp_sm_ins_next(sfp, SFP_MOD_EMPTY, 0);
-+ sfp_sm_mod_next(sfp, SFP_MOD_EMPTY, 0);
- }
- break;
- }
+++ /dev/null
-From d2591ea5520e2ee8fa557f96bb64c23cafac4b20 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Tue, 15 Oct 2019 10:33:13 +0100
-Subject: [PATCH 621/660] net: sfp: handle module remove outside state machine
-
-Removing a module resets the module state machine back to its initial
-state. Rather than explicitly handling this in every state, handle it
-early on outside of the state machine.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 16 +++++++++-------
- 1 file changed, 9 insertions(+), 7 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -1500,6 +1500,14 @@ static void sfp_sm_device(struct sfp *sf
- */
- static void sfp_sm_module(struct sfp *sfp, unsigned int event)
- {
-+ /* Handle remove event globally, it resets this state machine */
-+ if (event == SFP_E_REMOVE) {
-+ if (sfp->sm_mod_state > SFP_MOD_PROBE)
-+ sfp_sm_mod_remove(sfp);
-+ sfp_sm_mod_next(sfp, SFP_MOD_EMPTY, 0);
-+ return;
-+ }
-+
- switch (sfp->sm_mod_state) {
- default:
- if (event == SFP_E_INSERT && sfp->attached) {
-@@ -1509,9 +1517,7 @@ static void sfp_sm_module(struct sfp *sf
- break;
-
- case SFP_MOD_PROBE:
-- if (event == SFP_E_REMOVE) {
-- sfp_sm_mod_next(sfp, SFP_MOD_EMPTY, 0);
-- } else if (event == SFP_E_TIMEOUT) {
-+ if (event == SFP_E_TIMEOUT) {
- int val = sfp_sm_mod_probe(sfp);
-
- if (val == 0)
-@@ -1533,10 +1539,6 @@ static void sfp_sm_module(struct sfp *sf
- /* fallthrough */
- case SFP_MOD_PRESENT:
- case SFP_MOD_ERROR:
-- if (event == SFP_E_REMOVE) {
-- sfp_sm_mod_remove(sfp);
-- sfp_sm_mod_next(sfp, SFP_MOD_EMPTY, 0);
-- }
- break;
- }
- }
+++ /dev/null
-From 615090acb3c0b41691f3a03522ea38350387c0e4 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Tue, 15 Oct 2019 10:54:15 +0100
-Subject: [PATCH 622/660] net: sfp: rename T_PROBE_WAIT to T_SERIAL
-
-SFF-8472 rev 12.2 defines the time for the serial bus to become ready
-using t_serial. Use this as our identifier for this timeout to make
-it clear what we are referring to.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 13 ++++++-------
- 1 file changed, 6 insertions(+), 7 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -147,11 +147,10 @@ static const enum gpiod_flags gpio_flags
- * the same length on the PCB, which means it's possible for MOD DEF 0 to
- * connect before the I2C bus on MOD DEF 1/2.
- *
-- * The SFP MSA specifies 300ms as t_init (the time taken for TX_FAULT to
-- * be deasserted) but makes no mention of the earliest time before we can
-- * access the I2C EEPROM. However, Avago modules require 300ms.
-+ * The SFF-8472 specifies t_serial ("Time from power on until module is
-+ * ready for data transmission over the two wire serial bus.") as 300ms.
- */
--#define T_PROBE_INIT msecs_to_jiffies(300)
-+#define T_SERIAL msecs_to_jiffies(300)
- #define T_HPOWER_LEVEL msecs_to_jiffies(300)
- #define T_PROBE_RETRY msecs_to_jiffies(100)
-
-@@ -1495,8 +1494,8 @@ static void sfp_sm_device(struct sfp *sf
- }
- }
-
--/* This state machine tracks the insert/remove state of
-- * the module, and handles probing the on-board EEPROM.
-+/* This state machine tracks the insert/remove state of the module, probes
-+ * the on-board EEPROM, and sets up the power level.
- */
- static void sfp_sm_module(struct sfp *sfp, unsigned int event)
- {
-@@ -1512,7 +1511,7 @@ static void sfp_sm_module(struct sfp *sf
- default:
- if (event == SFP_E_INSERT && sfp->attached) {
- sfp_module_tx_disable(sfp);
-- sfp_sm_mod_next(sfp, SFP_MOD_PROBE, T_PROBE_INIT);
-+ sfp_sm_mod_next(sfp, SFP_MOD_PROBE, T_SERIAL);
- }
- break;
-
+++ /dev/null
-From d4b8746219e8c0361e5ed6e440ab3a8a600d1f76 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 11 Oct 2019 17:24:40 +0100
-Subject: [PATCH 623/660] net: sfp: parse SFP power requirement earlier
-
-Parse the SFP power requirement earlier, in preparation for moving the
-power level setup code.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 42 +++++++++++++++++++++++++++++-------------
- 1 file changed, 29 insertions(+), 13 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -196,6 +196,8 @@ struct sfp {
- unsigned int sm_retries;
-
- struct sfp_eeprom_id id;
-+ unsigned int module_power_mW;
-+
- #if IS_ENABLED(CONFIG_HWMON)
- struct sfp_diag diag;
- struct device *hwmon_dev;
-@@ -1309,17 +1311,14 @@ static void sfp_sm_mod_init(struct sfp *
- sfp_sm_probe_phy(sfp);
- }
-
--static int sfp_sm_mod_hpower(struct sfp *sfp)
-+static int sfp_module_parse_power(struct sfp *sfp)
- {
-- u32 power;
-- u8 val;
-- int err;
-+ u32 power_mW = 1000;
-
-- power = 1000;
- if (sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_POWER_DECL))
-- power = 1500;
-+ power_mW = 1500;
- if (sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_HIGH_POWER_LEVEL))
-- power = 2000;
-+ power_mW = 2000;
-
- if (sfp->id.ext.sff8472_compliance == SFP_SFF8472_COMPLIANCE_NONE &&
- (sfp->id.ext.diagmon & (SFP_DIAGMON_DDM | SFP_DIAGMON_ADDRMODE)) !=
-@@ -1328,23 +1327,33 @@ static int sfp_sm_mod_hpower(struct sfp
- * or requires an address change sequence, so assume that
- * the module powers up in the indicated power mode.
- */
-- if (power > sfp->max_power_mW) {
-+ if (power_mW > sfp->max_power_mW) {
- dev_err(sfp->dev,
- "Host does not support %u.%uW modules\n",
-- power / 1000, (power / 100) % 10);
-+ power_mW / 1000, (power_mW / 100) % 10);
- return -EINVAL;
- }
- return 0;
- }
-
-- if (power > sfp->max_power_mW) {
-+ if (power_mW > sfp->max_power_mW) {
- dev_warn(sfp->dev,
- "Host does not support %u.%uW modules, module left in power mode 1\n",
-- power / 1000, (power / 100) % 10);
-+ power_mW / 1000, (power_mW / 100) % 10);
- return 0;
- }
-
-- if (power <= 1000)
-+ sfp->module_power_mW = power_mW;
-+
-+ return 0;
-+}
-+
-+static int sfp_sm_mod_hpower(struct sfp *sfp)
-+{
-+ u8 val;
-+ int err;
-+
-+ if (sfp->module_power_mW <= 1000)
- return 0;
-
- err = sfp_read(sfp, true, SFP_EXT_STATUS, &val, sizeof(val));
-@@ -1364,7 +1373,8 @@ static int sfp_sm_mod_hpower(struct sfp
- }
-
- dev_info(sfp->dev, "Module switched to %u.%uW power level\n",
-- power / 1000, (power / 100) % 10);
-+ sfp->module_power_mW / 1000,
-+ (sfp->module_power_mW / 100) % 10);
- return T_HPOWER_LEVEL;
-
- err:
-@@ -1451,6 +1461,11 @@ static int sfp_sm_mod_probe(struct sfp *
- dev_warn(sfp->dev,
- "module address swap to access page 0xA2 is not supported.\n");
-
-+ /* Parse the module power requirement */
-+ ret = sfp_module_parse_power(sfp);
-+ if (ret < 0)
-+ return ret;
-+
- ret = sfp_hwmon_insert(sfp);
- if (ret < 0)
- return ret;
-@@ -1474,6 +1489,7 @@ static void sfp_sm_mod_remove(struct sfp
- sfp_module_tx_disable(sfp);
-
- memset(&sfp->id, 0, sizeof(sfp->id));
-+ sfp->module_power_mW = 0;
-
- dev_info(sfp->dev, "module removed\n");
- }
+++ /dev/null
-From dca678b8838945572cf50584cb33a7199c1fd397 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Thu, 17 Oct 2019 00:24:18 +0100
-Subject: [PATCH 624/660] net: sfp: avoid power switch on address-change
- modules
-
-If the module indicates that it requires an address change sequence to
-switch between address 0x50 and 0x51, which we don't support, we can't
-write to the register that controls the power mode to switch to high
-power mode. Warn the user that the module may not be functional in
-this case, and don't try to change the power mode.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 31 ++++++++++++++++++++-----------
- 1 file changed, 20 insertions(+), 11 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -1320,25 +1320,34 @@ static int sfp_module_parse_power(struct
- if (sfp->id.ext.options & cpu_to_be16(SFP_OPTIONS_HIGH_POWER_LEVEL))
- power_mW = 2000;
-
-- if (sfp->id.ext.sff8472_compliance == SFP_SFF8472_COMPLIANCE_NONE &&
-- (sfp->id.ext.diagmon & (SFP_DIAGMON_DDM | SFP_DIAGMON_ADDRMODE)) !=
-- SFP_DIAGMON_DDM) {
-- /* The module appears not to implement bus address 0xa2,
-- * or requires an address change sequence, so assume that
-- * the module powers up in the indicated power mode.
-- */
-- if (power_mW > sfp->max_power_mW) {
-+ if (power_mW > sfp->max_power_mW) {
-+ /* Module power specification exceeds the allowed maximum. */
-+ if (sfp->id.ext.sff8472_compliance ==
-+ SFP_SFF8472_COMPLIANCE_NONE &&
-+ !(sfp->id.ext.diagmon & SFP_DIAGMON_DDM)) {
-+ /* The module appears not to implement bus address
-+ * 0xa2, so assume that the module powers up in the
-+ * indicated mode.
-+ */
- dev_err(sfp->dev,
- "Host does not support %u.%uW modules\n",
- power_mW / 1000, (power_mW / 100) % 10);
- return -EINVAL;
-+ } else {
-+ dev_warn(sfp->dev,
-+ "Host does not support %u.%uW modules, module left in power mode 1\n",
-+ power_mW / 1000, (power_mW / 100) % 10);
-+ return 0;
- }
-- return 0;
- }
-
-- if (power_mW > sfp->max_power_mW) {
-+ /* If the module requires a higher power mode, but also requires
-+ * an address change sequence, warn the user that the module may
-+ * not be functional.
-+ */
-+ if (sfp->id.ext.diagmon & SFP_DIAGMON_ADDRMODE && power_mW > 1000) {
- dev_warn(sfp->dev,
-- "Host does not support %u.%uW modules, module left in power mode 1\n",
-+ "Address Change Sequence not supported but module requies %u.%uW, module may not be functional\n",
- power_mW / 1000, (power_mW / 100) % 10);
- return 0;
- }
+++ /dev/null
-From df5c4d93c5a59cba0f7479a4cd4e22b50726ce88 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Thu, 17 Oct 2019 11:12:42 +0100
-Subject: [PATCH 625/660] net: sfp: control TX_DISABLE and phy only from main
- state machine
-
-We initialise TX_DISABLE when the sfp cage is probed, and then
-maintain its state in the main state machine. However, the module
-state machine:
-- negates it when detecting a newly inserted module when it's already
- guaranteed to be negated.
-- negates it when the module is removed, but the main state machine
- will do this anyway.
-
-Make TX_DISABLE entirely controlled by the main state machine.
-
-The main state machine also probes the module for a PHY, and removes
-the PHY when the the module is removed. Hence, removing the PHY in
-sfp_sm_module_remove() is also redundant, and is a left-over from
-when we tried to probe for the PHY from the module state machine.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 9 +--------
- 1 file changed, 1 insertion(+), 8 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -1492,11 +1492,6 @@ static void sfp_sm_mod_remove(struct sfp
-
- sfp_hwmon_remove(sfp);
-
-- if (sfp->mod_phy)
-- sfp_sm_phy_detach(sfp);
--
-- sfp_module_tx_disable(sfp);
--
- memset(&sfp->id, 0, sizeof(sfp->id));
- sfp->module_power_mW = 0;
-
-@@ -1534,10 +1529,8 @@ static void sfp_sm_module(struct sfp *sf
-
- switch (sfp->sm_mod_state) {
- default:
-- if (event == SFP_E_INSERT && sfp->attached) {
-- sfp_module_tx_disable(sfp);
-+ if (event == SFP_E_INSERT && sfp->attached)
- sfp_sm_mod_next(sfp, SFP_MOD_PROBE, T_SERIAL);
-- }
- break;
-
- case SFP_MOD_PROBE:
+++ /dev/null
-From 5ed0bd49b2d3ac4439c2d7f44e5a82b7cf6f409a Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 18 Oct 2019 10:09:02 +0100
-Subject: [PATCH 626/660] net: sfp: split the PHY probe from sfp_sm_mod_init()
-
-Move the PHY probe into a separate function, splitting it from
-sfp_sm_mod_init(). This will allow us to eliminate the 50ms mdelay()
-inside the state machine.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 21 +++++++++++++--------
- 1 file changed, 13 insertions(+), 8 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -1288,14 +1288,10 @@ static void sfp_sm_fault(struct sfp *sfp
- static void sfp_sm_mod_init(struct sfp *sfp)
- {
- sfp_module_tx_enable(sfp);
-+}
-
-- /* Wait t_init before indicating that the link is up, provided the
-- * current state indicates no TX_FAULT. If TX_FAULT clears before
-- * this time, that's fine too.
-- */
-- sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES);
-- sfp->sm_retries = 5;
--
-+static void sfp_sm_probe_for_phy(struct sfp *sfp)
-+{
- /* Setting the serdes link mode is guesswork: there's no
- * field in the EEPROM which indicates what mode should
- * be used.
-@@ -1580,8 +1576,17 @@ static void sfp_sm_main(struct sfp *sfp,
- switch (sfp->sm_state) {
- case SFP_S_DOWN:
- if (sfp->sm_mod_state == SFP_MOD_PRESENT &&
-- sfp->sm_dev_state == SFP_DEV_UP)
-+ sfp->sm_dev_state == SFP_DEV_UP) {
- sfp_sm_mod_init(sfp);
-+ sfp_sm_probe_for_phy(sfp);
-+
-+ /* Wait t_init before indicating that the link is up,
-+ * provided the current state indicates no TX_FAULT. If
-+ * TX_FAULT clears before this time, that's fine too.
-+ */
-+ sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES);
-+ sfp->sm_retries = 5;
-+ }
- break;
-
- case SFP_S_INIT:
+++ /dev/null
-From 0fe72afaa31f98ebd71bd6683fc47021105d0157 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 18 Oct 2019 10:21:46 +0100
-Subject: [PATCH 627/660] net: sfp: eliminate mdelay() from PHY probe
-
-Rather than using mdelay() to wait before probing the PHY (which holds
-several locks, including the rtnl lock), add an extra wait state to
-the state machine to introduce the 50ms delay without holding any
-locks.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 52 +++++++++++++++++++++++++++++++++----------
- 1 file changed, 40 insertions(+), 12 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -52,6 +52,7 @@ enum {
- SFP_DEV_UP,
-
- SFP_S_DOWN = 0,
-+ SFP_S_WAIT,
- SFP_S_INIT,
- SFP_S_WAIT_LOS,
- SFP_S_LINK_UP,
-@@ -108,6 +109,7 @@ static const char *event_to_str(unsigned
-
- static const char * const sm_state_strings[] = {
- [SFP_S_DOWN] = "down",
-+ [SFP_S_WAIT] = "wait",
- [SFP_S_INIT] = "init",
- [SFP_S_WAIT_LOS] = "wait_los",
- [SFP_S_LINK_UP] = "link_up",
-@@ -139,6 +141,7 @@ static const enum gpiod_flags gpio_flags
- GPIOD_ASIS,
- };
-
-+#define T_WAIT msecs_to_jiffies(50)
- #define T_INIT_JIFFIES msecs_to_jiffies(300)
- #define T_RESET_US 10
- #define T_FAULT_RECOVER msecs_to_jiffies(1000)
-@@ -159,9 +162,6 @@ static const enum gpiod_flags gpio_flags
- */
- #define SFP_PHY_ADDR 22
-
--/* Give this long for the PHY to reset. */
--#define T_PHY_RESET_MS 50
--
- struct sff_data {
- unsigned int gpios;
- bool (*module_supported)(const struct sfp_eeprom_id *id);
-@@ -1202,8 +1202,6 @@ static void sfp_sm_probe_phy(struct sfp
- struct phy_device *phy;
- int err;
-
-- msleep(T_PHY_RESET_MS);
--
- phy = mdiobus_scan(sfp->i2c_mii, SFP_PHY_ADDR);
- if (phy == ERR_PTR(-ENODEV)) {
- dev_info(sfp->dev, "no PHY detected\n");
-@@ -1558,6 +1556,8 @@ static void sfp_sm_module(struct sfp *sf
-
- static void sfp_sm_main(struct sfp *sfp, unsigned int event)
- {
-+ unsigned long timeout;
-+
- /* Some events are global */
- if (sfp->sm_state != SFP_S_DOWN &&
- (sfp->sm_mod_state != SFP_MOD_PRESENT ||
-@@ -1575,17 +1575,45 @@ static void sfp_sm_main(struct sfp *sfp,
- /* The main state machine */
- switch (sfp->sm_state) {
- case SFP_S_DOWN:
-- if (sfp->sm_mod_state == SFP_MOD_PRESENT &&
-- sfp->sm_dev_state == SFP_DEV_UP) {
-- sfp_sm_mod_init(sfp);
-- sfp_sm_probe_for_phy(sfp);
-+ if (sfp->sm_mod_state != SFP_MOD_PRESENT ||
-+ sfp->sm_dev_state != SFP_DEV_UP)
-+ break;
-+
-+ sfp_sm_mod_init(sfp);
-+
-+ /* Initialise the fault clearance retries */
-+ sfp->sm_retries = 5;
-+
-+ /* We need to check the TX_FAULT state, which is not defined
-+ * while TX_DISABLE is asserted. The earliest we want to do
-+ * anything (such as probe for a PHY) is 50ms.
-+ */
-+ sfp_sm_next(sfp, SFP_S_WAIT, T_WAIT);
-+ break;
-+
-+ case SFP_S_WAIT:
-+ if (event != SFP_E_TIMEOUT)
-+ break;
-+
-+ sfp_sm_probe_for_phy(sfp);
-
-+ if (sfp->state & SFP_F_TX_FAULT) {
- /* Wait t_init before indicating that the link is up,
- * provided the current state indicates no TX_FAULT. If
- * TX_FAULT clears before this time, that's fine too.
- */
-- sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES);
-- sfp->sm_retries = 5;
-+ timeout = T_INIT_JIFFIES;
-+ if (timeout > T_WAIT)
-+ timeout -= T_WAIT;
-+ else
-+ timeout = 1;
-+
-+ sfp_sm_next(sfp, SFP_S_INIT, timeout);
-+ } else {
-+ /* TX_FAULT is not asserted, assume the module has
-+ * finished initialising.
-+ */
-+ goto init_done;
- }
- break;
-
-@@ -1593,7 +1621,7 @@ static void sfp_sm_main(struct sfp *sfp,
- if (event == SFP_E_TIMEOUT && sfp->state & SFP_F_TX_FAULT)
- sfp_sm_fault(sfp, true);
- else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR)
-- sfp_sm_link_check_los(sfp);
-+ init_done: sfp_sm_link_check_los(sfp);
- break;
-
- case SFP_S_WAIT_LOS:
+++ /dev/null
-From 2aa424ee7fbe43e2cd24e28c2f6388c4e1796bd2 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 18 Oct 2019 09:58:33 +0100
-Subject: [PATCH 628/660] net: sfp: allow fault processing to transition to
- other states
-
-Add the next state to sfp_sm_fault() so that it can branch to other
-states. This will be necessary to improve the initialisation path.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 12 ++++++------
- 1 file changed, 6 insertions(+), 6 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -1269,7 +1269,7 @@ static bool sfp_los_event_inactive(struc
- event == SFP_E_LOS_LOW);
- }
-
--static void sfp_sm_fault(struct sfp *sfp, bool warn)
-+static void sfp_sm_fault(struct sfp *sfp, unsigned int next_state, bool warn)
- {
- if (sfp->sm_retries && !--sfp->sm_retries) {
- dev_err(sfp->dev,
-@@ -1279,7 +1279,7 @@ static void sfp_sm_fault(struct sfp *sfp
- if (warn)
- dev_err(sfp->dev, "module transmit fault indicated\n");
-
-- sfp_sm_next(sfp, SFP_S_TX_FAULT, T_FAULT_RECOVER);
-+ sfp_sm_next(sfp, next_state, T_FAULT_RECOVER);
- }
- }
-
-@@ -1619,14 +1619,14 @@ static void sfp_sm_main(struct sfp *sfp,
-
- case SFP_S_INIT:
- if (event == SFP_E_TIMEOUT && sfp->state & SFP_F_TX_FAULT)
-- sfp_sm_fault(sfp, true);
-+ sfp_sm_fault(sfp, SFP_S_TX_FAULT, true);
- else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR)
- init_done: sfp_sm_link_check_los(sfp);
- break;
-
- case SFP_S_WAIT_LOS:
- if (event == SFP_E_TX_FAULT)
-- sfp_sm_fault(sfp, true);
-+ sfp_sm_fault(sfp, SFP_S_TX_FAULT, true);
- else if (sfp_los_event_inactive(sfp, event))
- sfp_sm_link_up(sfp);
- break;
-@@ -1634,7 +1634,7 @@ static void sfp_sm_main(struct sfp *sfp,
- case SFP_S_LINK_UP:
- if (event == SFP_E_TX_FAULT) {
- sfp_sm_link_down(sfp);
-- sfp_sm_fault(sfp, true);
-+ sfp_sm_fault(sfp, SFP_S_TX_FAULT, true);
- } else if (sfp_los_event_active(sfp, event)) {
- sfp_sm_link_down(sfp);
- sfp_sm_next(sfp, SFP_S_WAIT_LOS, 0);
-@@ -1650,7 +1650,7 @@ static void sfp_sm_main(struct sfp *sfp,
-
- case SFP_S_REINIT:
- if (event == SFP_E_TIMEOUT && sfp->state & SFP_F_TX_FAULT) {
-- sfp_sm_fault(sfp, false);
-+ sfp_sm_fault(sfp, SFP_S_TX_FAULT, false);
- } else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) {
- dev_info(sfp->dev, "module transmit fault recovered\n");
- sfp_sm_link_check_los(sfp);
+++ /dev/null
-From 38b62a12231be4b86fc5ca5477579d29831c02a5 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 18 Oct 2019 10:31:07 +0100
-Subject: [PATCH 629/660] net: sfp: ensure TX_FAULT has deasserted before
- probing the PHY
-
-TX_FAULT should be deasserted to indicate that the module has completed
-its initialisation. This may include the on-board PHY, so wait until
-the module has deasserted TX_FAULT before probing the PHY.
-
-This means that we need an extra state to handle a TX_FAULT that
-remains set for longer than t_init, since using the existing handling
-state would bypass the PHY probe.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 31 +++++++++++++++++++++++++------
- 1 file changed, 25 insertions(+), 6 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -54,6 +54,7 @@ enum {
- SFP_S_DOWN = 0,
- SFP_S_WAIT,
- SFP_S_INIT,
-+ SFP_S_INIT_TX_FAULT,
- SFP_S_WAIT_LOS,
- SFP_S_LINK_UP,
- SFP_S_TX_FAULT,
-@@ -111,6 +112,7 @@ static const char * const sm_state_strin
- [SFP_S_DOWN] = "down",
- [SFP_S_WAIT] = "wait",
- [SFP_S_INIT] = "init",
-+ [SFP_S_INIT_TX_FAULT] = "init_tx_fault",
- [SFP_S_WAIT_LOS] = "wait_los",
- [SFP_S_LINK_UP] = "link_up",
- [SFP_S_TX_FAULT] = "tx_fault",
-@@ -1595,8 +1597,6 @@ static void sfp_sm_main(struct sfp *sfp,
- if (event != SFP_E_TIMEOUT)
- break;
-
-- sfp_sm_probe_for_phy(sfp);
--
- if (sfp->state & SFP_F_TX_FAULT) {
- /* Wait t_init before indicating that the link is up,
- * provided the current state indicates no TX_FAULT. If
-@@ -1618,10 +1618,29 @@ static void sfp_sm_main(struct sfp *sfp,
- break;
-
- case SFP_S_INIT:
-- if (event == SFP_E_TIMEOUT && sfp->state & SFP_F_TX_FAULT)
-- sfp_sm_fault(sfp, SFP_S_TX_FAULT, true);
-- else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR)
-- init_done: sfp_sm_link_check_los(sfp);
-+ if (event == SFP_E_TIMEOUT && sfp->state & SFP_F_TX_FAULT) {
-+ /* TX_FAULT is still asserted after t_init, so assume
-+ * there is a fault.
-+ */
-+ sfp_sm_fault(sfp, SFP_S_INIT_TX_FAULT,
-+ sfp->sm_retries == 5);
-+ } else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) {
-+ init_done: /* TX_FAULT deasserted or we timed out with TX_FAULT
-+ * clear. Probe for the PHY and check the LOS state.
-+ */
-+ sfp_sm_probe_for_phy(sfp);
-+ sfp_sm_link_check_los(sfp);
-+
-+ /* Reset the fault retry count */
-+ sfp->sm_retries = 5;
-+ }
-+ break;
-+
-+ case SFP_S_INIT_TX_FAULT:
-+ if (event == SFP_E_TIMEOUT) {
-+ sfp_module_tx_fault_reset(sfp);
-+ sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES);
-+ }
- break;
-
- case SFP_S_WAIT_LOS:
+++ /dev/null
-From ec6036a58f979c66bbd5cd9d0d1c783a98c2c644 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Tue, 5 Nov 2019 12:57:40 +0000
-Subject: [PATCH 630/660] net: sfp: track upstream's attachment state in state
- machine
-
-Track the upstream's attachment state in the state machine rather than
-maintaining a boolean, which ensures that we have a strict order of
-ATTACH followed by an UP event - we can never believe that a newly
-attached upstream will be anything but down.
-
-Rearrange the order of state machines so we run the module state
-machine after the upstream device's state machine, so the module state
-machine can check the current state of the device and take action to
-e.g. reset back to empty state when the upstream is detached.
-
-This is to allow the module detection to run independently of the
-network device becoming available.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 42 +++++++++++++++++++++++++++++-------------
- 1 file changed, 29 insertions(+), 13 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -34,6 +34,8 @@ enum {
-
- SFP_E_INSERT = 0,
- SFP_E_REMOVE,
-+ SFP_E_DEV_ATTACH,
-+ SFP_E_DEV_DETACH,
- SFP_E_DEV_DOWN,
- SFP_E_DEV_UP,
- SFP_E_TX_FAULT,
-@@ -48,7 +50,8 @@ enum {
- SFP_MOD_PRESENT,
- SFP_MOD_ERROR,
-
-- SFP_DEV_DOWN = 0,
-+ SFP_DEV_DETACHED = 0,
-+ SFP_DEV_DOWN,
- SFP_DEV_UP,
-
- SFP_S_DOWN = 0,
-@@ -78,6 +81,7 @@ static const char *mod_state_to_str(unsi
- }
-
- static const char * const dev_state_strings[] = {
-+ [SFP_DEV_DETACHED] = "detached",
- [SFP_DEV_DOWN] = "down",
- [SFP_DEV_UP] = "up",
- };
-@@ -92,6 +96,8 @@ static const char *dev_state_to_str(unsi
- static const char * const event_strings[] = {
- [SFP_E_INSERT] = "insert",
- [SFP_E_REMOVE] = "remove",
-+ [SFP_E_DEV_ATTACH] = "dev_attach",
-+ [SFP_E_DEV_DETACH] = "dev_detach",
- [SFP_E_DEV_DOWN] = "dev_down",
- [SFP_E_DEV_UP] = "dev_up",
- [SFP_E_TX_FAULT] = "tx_fault",
-@@ -186,7 +192,6 @@ struct sfp {
- struct gpio_desc *gpio[GPIO_MAX];
- int gpio_irq[GPIO_MAX];
-
-- bool attached;
- struct mutex st_mutex; /* Protects state */
- unsigned int state;
- struct delayed_work poll;
-@@ -1494,17 +1499,26 @@ static void sfp_sm_mod_remove(struct sfp
- dev_info(sfp->dev, "module removed\n");
- }
-
--/* This state machine tracks the netdev up/down state */
-+/* This state machine tracks the upstream's state */
- static void sfp_sm_device(struct sfp *sfp, unsigned int event)
- {
- switch (sfp->sm_dev_state) {
- default:
-- if (event == SFP_E_DEV_UP)
-+ if (event == SFP_E_DEV_ATTACH)
-+ sfp->sm_dev_state = SFP_DEV_DOWN;
-+ break;
-+
-+ case SFP_DEV_DOWN:
-+ if (event == SFP_E_DEV_DETACH)
-+ sfp->sm_dev_state = SFP_DEV_DETACHED;
-+ else if (event == SFP_E_DEV_UP)
- sfp->sm_dev_state = SFP_DEV_UP;
- break;
-
- case SFP_DEV_UP:
-- if (event == SFP_E_DEV_DOWN)
-+ if (event == SFP_E_DEV_DETACH)
-+ sfp->sm_dev_state = SFP_DEV_DETACHED;
-+ else if (event == SFP_E_DEV_DOWN)
- sfp->sm_dev_state = SFP_DEV_DOWN;
- break;
- }
-@@ -1515,17 +1529,20 @@ static void sfp_sm_device(struct sfp *sf
- */
- static void sfp_sm_module(struct sfp *sfp, unsigned int event)
- {
-- /* Handle remove event globally, it resets this state machine */
-- if (event == SFP_E_REMOVE) {
-+ /* Handle remove event globally, it resets this state machine.
-+ * Also deal with upstream detachment.
-+ */
-+ if (event == SFP_E_REMOVE || sfp->sm_dev_state < SFP_DEV_DOWN) {
- if (sfp->sm_mod_state > SFP_MOD_PROBE)
- sfp_sm_mod_remove(sfp);
-- sfp_sm_mod_next(sfp, SFP_MOD_EMPTY, 0);
-+ if (sfp->sm_mod_state != SFP_MOD_EMPTY)
-+ sfp_sm_mod_next(sfp, SFP_MOD_EMPTY, 0);
- return;
- }
-
- switch (sfp->sm_mod_state) {
- default:
-- if (event == SFP_E_INSERT && sfp->attached)
-+ if (event == SFP_E_INSERT)
- sfp_sm_mod_next(sfp, SFP_MOD_PROBE, T_SERIAL);
- break;
-
-@@ -1691,8 +1708,8 @@ static void sfp_sm_event(struct sfp *sfp
- sm_state_to_str(sfp->sm_state),
- event_to_str(event));
-
-- sfp_sm_module(sfp, event);
- sfp_sm_device(sfp, event);
-+ sfp_sm_module(sfp, event);
- sfp_sm_main(sfp, event);
-
- dev_dbg(sfp->dev, "SM: exit %s:%s:%s\n",
-@@ -1705,15 +1722,14 @@ static void sfp_sm_event(struct sfp *sfp
-
- static void sfp_attach(struct sfp *sfp)
- {
-- sfp->attached = true;
-+ sfp_sm_event(sfp, SFP_E_DEV_ATTACH);
- if (sfp->state & SFP_F_PRESENT)
- sfp_sm_event(sfp, SFP_E_INSERT);
- }
-
- static void sfp_detach(struct sfp *sfp)
- {
-- sfp->attached = false;
-- sfp_sm_event(sfp, SFP_E_REMOVE);
-+ sfp_sm_event(sfp, SFP_E_DEV_DETACH);
- }
-
- static void sfp_start(struct sfp *sfp)
+++ /dev/null
-From fdff863a4ce3677907f64396e34c45025abb6600 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Tue, 5 Nov 2019 12:59:36 +0000
-Subject: [PATCH 631/660] net: sfp: split power mode switching from probe
-
-Switch the power mode switching from the probe, so that we don't
-repeatedly re-probe the SFP device if there is a problem accessing
-the registers at I2C address 0x51.
-
-In splitting this out, we can also fix a bug where we leave the module
-in high-power mode when the upstream device is detached but the module
-is still inserted.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 101 ++++++++++++++++++++++++++----------------
- 1 file changed, 64 insertions(+), 37 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -47,6 +47,7 @@ enum {
- SFP_MOD_EMPTY = 0,
- SFP_MOD_PROBE,
- SFP_MOD_HPOWER,
-+ SFP_MOD_WAITPWR,
- SFP_MOD_PRESENT,
- SFP_MOD_ERROR,
-
-@@ -69,6 +70,7 @@ static const char * const mod_state_str
- [SFP_MOD_EMPTY] = "empty",
- [SFP_MOD_PROBE] = "probe",
- [SFP_MOD_HPOWER] = "hpower",
-+ [SFP_MOD_WAITPWR] = "waitpwr",
- [SFP_MOD_PRESENT] = "present",
- [SFP_MOD_ERROR] = "error",
- };
-@@ -1358,37 +1360,34 @@ static int sfp_module_parse_power(struct
- return 0;
- }
-
--static int sfp_sm_mod_hpower(struct sfp *sfp)
-+static int sfp_sm_mod_hpower(struct sfp *sfp, bool enable)
- {
- u8 val;
- int err;
-
-- if (sfp->module_power_mW <= 1000)
-- return 0;
--
- err = sfp_read(sfp, true, SFP_EXT_STATUS, &val, sizeof(val));
- if (err != sizeof(val)) {
- dev_err(sfp->dev, "Failed to read EEPROM: %d\n", err);
-- err = -EAGAIN;
-- goto err;
-+ return -EAGAIN;
- }
-
-- val |= BIT(0);
-+ if (enable)
-+ val |= BIT(0);
-+ else
-+ val &= ~BIT(0);
-
- err = sfp_write(sfp, true, SFP_EXT_STATUS, &val, sizeof(val));
- if (err != sizeof(val)) {
- dev_err(sfp->dev, "Failed to write EEPROM: %d\n", err);
-- err = -EAGAIN;
-- goto err;
-+ return -EAGAIN;
- }
-
-- dev_info(sfp->dev, "Module switched to %u.%uW power level\n",
-- sfp->module_power_mW / 1000,
-- (sfp->module_power_mW / 100) % 10);
-- return T_HPOWER_LEVEL;
-+ if (enable)
-+ dev_info(sfp->dev, "Module switched to %u.%uW power level\n",
-+ sfp->module_power_mW / 1000,
-+ (sfp->module_power_mW / 100) % 10);
-
--err:
-- return err;
-+ return 0;
- }
-
- static int sfp_sm_mod_probe(struct sfp *sfp)
-@@ -1484,7 +1483,7 @@ static int sfp_sm_mod_probe(struct sfp *
- if (ret < 0)
- return ret;
-
-- return sfp_sm_mod_hpower(sfp);
-+ return 0;
- }
-
- static void sfp_sm_mod_remove(struct sfp *sfp)
-@@ -1529,13 +1528,22 @@ static void sfp_sm_device(struct sfp *sf
- */
- static void sfp_sm_module(struct sfp *sfp, unsigned int event)
- {
-- /* Handle remove event globally, it resets this state machine.
-- * Also deal with upstream detachment.
-- */
-- if (event == SFP_E_REMOVE || sfp->sm_dev_state < SFP_DEV_DOWN) {
-+ int err;
-+
-+ /* Handle remove event globally, it resets this state machine */
-+ if (event == SFP_E_REMOVE) {
- if (sfp->sm_mod_state > SFP_MOD_PROBE)
- sfp_sm_mod_remove(sfp);
-- if (sfp->sm_mod_state != SFP_MOD_EMPTY)
-+ sfp_sm_mod_next(sfp, SFP_MOD_EMPTY, 0);
-+ return;
-+ }
-+
-+ /* Handle device detach globally */
-+ if (sfp->sm_dev_state < SFP_DEV_DOWN) {
-+ if (sfp->module_power_mW > 1000 &&
-+ sfp->sm_mod_state > SFP_MOD_HPOWER)
-+ sfp_sm_mod_hpower(sfp, false);
-+ if (sfp->sm_mod_state > SFP_MOD_EMPTY)
- sfp_sm_mod_next(sfp, SFP_MOD_EMPTY, 0);
- return;
- }
-@@ -1547,26 +1555,45 @@ static void sfp_sm_module(struct sfp *sf
- break;
-
- case SFP_MOD_PROBE:
-- if (event == SFP_E_TIMEOUT) {
-- int val = sfp_sm_mod_probe(sfp);
-+ if (event != SFP_E_TIMEOUT)
-+ break;
-
-- if (val == 0)
-- sfp_sm_mod_next(sfp, SFP_MOD_PRESENT, 0);
-- else if (val > 0)
-- sfp_sm_mod_next(sfp, SFP_MOD_HPOWER, val);
-- else if (val != -EAGAIN)
-- sfp_sm_mod_next(sfp, SFP_MOD_ERROR, 0);
-- else
-- sfp_sm_set_timer(sfp, T_PROBE_RETRY);
-+ err = sfp_sm_mod_probe(sfp);
-+ if (err == -EAGAIN) {
-+ sfp_sm_set_timer(sfp, T_PROBE_RETRY);
-+ break;
- }
-- break;
-+ if (err < 0) {
-+ sfp_sm_mod_next(sfp, SFP_MOD_ERROR, 0);
-+ break;
-+ }
-+
-+ /* If this is a power level 1 module, we are done */
-+ if (sfp->module_power_mW <= 1000)
-+ goto insert;
-
-+ sfp_sm_mod_next(sfp, SFP_MOD_HPOWER, 0);
-+ /* fall through */
- case SFP_MOD_HPOWER:
-- if (event == SFP_E_TIMEOUT) {
-- sfp_sm_mod_next(sfp, SFP_MOD_PRESENT, 0);
-+ /* Enable high power mode */
-+ err = sfp_sm_mod_hpower(sfp, true);
-+ if (err == 0)
-+ sfp_sm_mod_next(sfp, SFP_MOD_WAITPWR, T_HPOWER_LEVEL);
-+ else if (err != -EAGAIN)
-+ sfp_sm_mod_next(sfp, SFP_MOD_ERROR, 0);
-+ else
-+ sfp_sm_set_timer(sfp, T_PROBE_RETRY);
-+ break;
-+
-+ case SFP_MOD_WAITPWR:
-+ /* Wait for T_HPOWER_LEVEL to time out */
-+ if (event != SFP_E_TIMEOUT)
- break;
-- }
-- /* fallthrough */
-+
-+ insert:
-+ sfp_sm_mod_next(sfp, SFP_MOD_PRESENT, 0);
-+ break;
-+
- case SFP_MOD_PRESENT:
- case SFP_MOD_ERROR:
- break;
+++ /dev/null
-From 57cbf7453551db1df619b79410d79fc418d862d5 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Tue, 5 Nov 2019 13:00:45 +0000
-Subject: [PATCH 632/660] net: sfp: move module insert reporting out of probe
-
-Move the module insertion reporting out of the probe handling, but
-after we have detected that the upstream has attached (since that is
-whom we are reporting insertion to.)
-
-Only report module removal if we had previously reported a module
-insertion.
-
-This gives cleaner semantics, and means we can probe the module before
-we have an upstream attached.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 58 +++++++++++++++++++++++++++++--------------
- 1 file changed, 40 insertions(+), 18 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -45,11 +45,12 @@ enum {
- SFP_E_TIMEOUT,
-
- SFP_MOD_EMPTY = 0,
-+ SFP_MOD_ERROR,
- SFP_MOD_PROBE,
-+ SFP_MOD_WAITDEV,
- SFP_MOD_HPOWER,
- SFP_MOD_WAITPWR,
- SFP_MOD_PRESENT,
-- SFP_MOD_ERROR,
-
- SFP_DEV_DETACHED = 0,
- SFP_DEV_DOWN,
-@@ -68,11 +69,12 @@ enum {
-
- static const char * const mod_state_strings[] = {
- [SFP_MOD_EMPTY] = "empty",
-+ [SFP_MOD_ERROR] = "error",
- [SFP_MOD_PROBE] = "probe",
-+ [SFP_MOD_WAITDEV] = "waitdev",
- [SFP_MOD_HPOWER] = "hpower",
- [SFP_MOD_WAITPWR] = "waitpwr",
- [SFP_MOD_PRESENT] = "present",
-- [SFP_MOD_ERROR] = "error",
- };
-
- static const char *mod_state_to_str(unsigned short mod_state)
-@@ -1479,16 +1481,13 @@ static int sfp_sm_mod_probe(struct sfp *
- if (ret < 0)
- return ret;
-
-- ret = sfp_module_insert(sfp->sfp_bus, &sfp->id);
-- if (ret < 0)
-- return ret;
--
- return 0;
- }
-
- static void sfp_sm_mod_remove(struct sfp *sfp)
- {
-- sfp_module_remove(sfp->sfp_bus);
-+ if (sfp->sm_mod_state > SFP_MOD_WAITDEV)
-+ sfp_module_remove(sfp->sfp_bus);
-
- sfp_hwmon_remove(sfp);
-
-@@ -1539,12 +1538,12 @@ static void sfp_sm_module(struct sfp *sf
- }
-
- /* Handle device detach globally */
-- if (sfp->sm_dev_state < SFP_DEV_DOWN) {
-+ if (sfp->sm_dev_state < SFP_DEV_DOWN &&
-+ sfp->sm_mod_state > SFP_MOD_WAITDEV) {
- if (sfp->module_power_mW > 1000 &&
- sfp->sm_mod_state > SFP_MOD_HPOWER)
- sfp_sm_mod_hpower(sfp, false);
-- if (sfp->sm_mod_state > SFP_MOD_EMPTY)
-- sfp_sm_mod_next(sfp, SFP_MOD_EMPTY, 0);
-+ sfp_sm_mod_next(sfp, SFP_MOD_WAITDEV, 0);
- return;
- }
-
-@@ -1555,6 +1554,7 @@ static void sfp_sm_module(struct sfp *sf
- break;
-
- case SFP_MOD_PROBE:
-+ /* Wait for T_PROBE_INIT to time out */
- if (event != SFP_E_TIMEOUT)
- break;
-
-@@ -1568,6 +1568,20 @@ static void sfp_sm_module(struct sfp *sf
- break;
- }
-
-+ sfp_sm_mod_next(sfp, SFP_MOD_WAITDEV, 0);
-+ /* fall through */
-+ case SFP_MOD_WAITDEV:
-+ /* Ensure that the device is attached before proceeding */
-+ if (sfp->sm_dev_state < SFP_DEV_DOWN)
-+ break;
-+
-+ /* Report the module insertion to the upstream device */
-+ err = sfp_module_insert(sfp->sfp_bus, &sfp->id);
-+ if (err < 0) {
-+ sfp_sm_mod_next(sfp, SFP_MOD_ERROR, 0);
-+ break;
-+ }
-+
- /* If this is a power level 1 module, we are done */
- if (sfp->module_power_mW <= 1000)
- goto insert;
-@@ -1577,12 +1591,17 @@ static void sfp_sm_module(struct sfp *sf
- case SFP_MOD_HPOWER:
- /* Enable high power mode */
- err = sfp_sm_mod_hpower(sfp, true);
-- if (err == 0)
-- sfp_sm_mod_next(sfp, SFP_MOD_WAITPWR, T_HPOWER_LEVEL);
-- else if (err != -EAGAIN)
-- sfp_sm_mod_next(sfp, SFP_MOD_ERROR, 0);
-- else
-- sfp_sm_set_timer(sfp, T_PROBE_RETRY);
-+ if (err < 0) {
-+ if (err != -EAGAIN) {
-+ sfp_module_remove(sfp->sfp_bus);
-+ sfp_sm_mod_next(sfp, SFP_MOD_ERROR, 0);
-+ } else {
-+ sfp_sm_set_timer(sfp, T_PROBE_RETRY);
-+ }
-+ break;
-+ }
-+
-+ sfp_sm_mod_next(sfp, SFP_MOD_WAITPWR, T_HPOWER_LEVEL);
- break;
-
- case SFP_MOD_WAITPWR:
-@@ -1750,8 +1769,6 @@ static void sfp_sm_event(struct sfp *sfp
- static void sfp_attach(struct sfp *sfp)
- {
- sfp_sm_event(sfp, SFP_E_DEV_ATTACH);
-- if (sfp->state & SFP_F_PRESENT)
-- sfp_sm_event(sfp, SFP_E_INSERT);
- }
-
- static void sfp_detach(struct sfp *sfp)
-@@ -2001,6 +2018,11 @@ static int sfp_probe(struct platform_dev
- sfp->state |= SFP_F_RATE_SELECT;
- sfp_set_state(sfp, sfp->state);
- sfp_module_tx_disable(sfp);
-+ if (sfp->state & SFP_F_PRESENT) {
-+ rtnl_lock();
-+ sfp_sm_event(sfp, SFP_E_INSERT);
-+ rtnl_unlock();
-+ }
-
- for (i = 0; i < GPIO_MAX; i++) {
- if (gpio_flags[i] != GPIOD_IN || !sfp->gpio[i])
+++ /dev/null
-From fb56cd08880aff8fb030e684fa4311bef712a499 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Tue, 5 Nov 2019 13:02:30 +0000
-Subject: [PATCH 633/660] net: sfp: allow sfp to probe slow to initialise GPON
- modules
-
-Some GPON modules (e.g. Huawei MA5671A) take a significant amount of
-time to start responding on the I2C bus, contary to the SFF
-specifications.
-
-Work around this by implementing a two-level timeout strategy, where
-we initially quickly retry for the module, and then use a slower retry
-after we exceed a maximum number of quick attempts.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 38 ++++++++++++++++++++++++++++----------
- 1 file changed, 28 insertions(+), 10 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -165,9 +165,12 @@ static const enum gpiod_flags gpio_flags
- * The SFF-8472 specifies t_serial ("Time from power on until module is
- * ready for data transmission over the two wire serial bus.") as 300ms.
- */
--#define T_SERIAL msecs_to_jiffies(300)
--#define T_HPOWER_LEVEL msecs_to_jiffies(300)
--#define T_PROBE_RETRY msecs_to_jiffies(100)
-+#define T_SERIAL msecs_to_jiffies(300)
-+#define T_HPOWER_LEVEL msecs_to_jiffies(300)
-+#define T_PROBE_RETRY_INIT msecs_to_jiffies(100)
-+#define R_PROBE_RETRY_INIT 10
-+#define T_PROBE_RETRY_SLOW msecs_to_jiffies(5000)
-+#define R_PROBE_RETRY_SLOW 12
-
- /* SFP modules appear to always have their PHY configured for bus address
- * 0x56 (which with mdio-i2c, translates to a PHY address of 22).
-@@ -202,6 +205,8 @@ struct sfp {
- struct delayed_work timeout;
- struct mutex sm_mutex; /* Protects state machine */
- unsigned char sm_mod_state;
-+ unsigned char sm_mod_tries_init;
-+ unsigned char sm_mod_tries;
- unsigned char sm_dev_state;
- unsigned short sm_state;
- unsigned int sm_retries;
-@@ -1392,7 +1397,7 @@ static int sfp_sm_mod_hpower(struct sfp
- return 0;
- }
-
--static int sfp_sm_mod_probe(struct sfp *sfp)
-+static int sfp_sm_mod_probe(struct sfp *sfp, bool report)
- {
- /* SFP module inserted - read I2C data */
- struct sfp_eeprom_id id;
-@@ -1402,7 +1407,8 @@ static int sfp_sm_mod_probe(struct sfp *
-
- ret = sfp_read(sfp, false, 0, &id, sizeof(id));
- if (ret < 0) {
-- dev_err(sfp->dev, "failed to read EEPROM: %d\n", ret);
-+ if (report)
-+ dev_err(sfp->dev, "failed to read EEPROM: %d\n", ret);
- return -EAGAIN;
- }
-
-@@ -1549,8 +1555,11 @@ static void sfp_sm_module(struct sfp *sf
-
- switch (sfp->sm_mod_state) {
- default:
-- if (event == SFP_E_INSERT)
-+ if (event == SFP_E_INSERT) {
- sfp_sm_mod_next(sfp, SFP_MOD_PROBE, T_SERIAL);
-+ sfp->sm_mod_tries_init = R_PROBE_RETRY_INIT;
-+ sfp->sm_mod_tries = R_PROBE_RETRY_SLOW;
-+ }
- break;
-
- case SFP_MOD_PROBE:
-@@ -1558,10 +1567,19 @@ static void sfp_sm_module(struct sfp *sf
- if (event != SFP_E_TIMEOUT)
- break;
-
-- err = sfp_sm_mod_probe(sfp);
-+ err = sfp_sm_mod_probe(sfp, sfp->sm_mod_tries == 1);
- if (err == -EAGAIN) {
-- sfp_sm_set_timer(sfp, T_PROBE_RETRY);
-- break;
-+ if (sfp->sm_mod_tries_init &&
-+ --sfp->sm_mod_tries_init) {
-+ sfp_sm_set_timer(sfp, T_PROBE_RETRY_INIT);
-+ break;
-+ } else if (sfp->sm_mod_tries && --sfp->sm_mod_tries) {
-+ if (sfp->sm_mod_tries == R_PROBE_RETRY_SLOW - 1)
-+ dev_warn(sfp->dev,
-+ "please wait, module slow to respond\n");
-+ sfp_sm_set_timer(sfp, T_PROBE_RETRY_SLOW);
-+ break;
-+ }
- }
- if (err < 0) {
- sfp_sm_mod_next(sfp, SFP_MOD_ERROR, 0);
-@@ -1596,7 +1614,7 @@ static void sfp_sm_module(struct sfp *sf
- sfp_module_remove(sfp->sfp_bus);
- sfp_sm_mod_next(sfp, SFP_MOD_ERROR, 0);
- } else {
-- sfp_sm_set_timer(sfp, T_PROBE_RETRY);
-+ sfp_sm_set_timer(sfp, T_PROBE_RETRY_INIT);
- }
- break;
- }
+++ /dev/null
-From 559391fc20fae506adcb311b904cc544c76436c0 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Thu, 7 Nov 2019 18:52:07 +0000
-Subject: [PATCH 634/660] net: sfp: allow modules with slow diagnostics to
- probe
-
-When a module is inserted, we attempt to read read the ID from address
-0x50. Once we are able to read the ID, we immediately attempt to
-initialise the hwmon support by reading from address 0x51. If this
-fails, then we fall into error state, and assume that the module is
-not usable.
-
-Modules such as the ALCATELLUCENT 3FE46541AA use a real EEPROM for
-I2C address 0x50, which responds immediately. However, address 0x51
-is an emulated, which only becomes available once the on-board firmware
-has booted. This prompts us to fall into the error state.
-
-Since the module may be usable without diagnostics, arrange for the
-hwmon probe independent of the rest of the SFP itself, retrying every
-5s for up to about 60s for the monitoring to become available, and
-print an error message if it doesn't become available.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 96 +++++++++++++++++++++++++++++++++----------
- 1 file changed, 74 insertions(+), 22 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -216,6 +216,8 @@ struct sfp {
-
- #if IS_ENABLED(CONFIG_HWMON)
- struct sfp_diag diag;
-+ struct delayed_work hwmon_probe;
-+ unsigned int hwmon_tries;
- struct device *hwmon_dev;
- char *hwmon_name;
- #endif
-@@ -1094,29 +1096,27 @@ static const struct hwmon_chip_info sfp_
- .info = sfp_hwmon_info,
- };
-
--static int sfp_hwmon_insert(struct sfp *sfp)
-+static void sfp_hwmon_probe(struct work_struct *work)
- {
-+ struct sfp *sfp = container_of(work, struct sfp, hwmon_probe.work);
- int err, i;
-
-- if (sfp->id.ext.sff8472_compliance == SFP_SFF8472_COMPLIANCE_NONE)
-- return 0;
--
-- if (!(sfp->id.ext.diagmon & SFP_DIAGMON_DDM))
-- return 0;
--
-- if (sfp->id.ext.diagmon & SFP_DIAGMON_ADDRMODE)
-- /* This driver in general does not support address
-- * change.
-- */
-- return 0;
--
- err = sfp_read(sfp, true, 0, &sfp->diag, sizeof(sfp->diag));
-- if (err < 0)
-- return err;
-+ if (err < 0) {
-+ if (sfp->hwmon_tries--) {
-+ mod_delayed_work(system_wq, &sfp->hwmon_probe,
-+ T_PROBE_RETRY_SLOW);
-+ } else {
-+ dev_warn(sfp->dev, "hwmon probe failed: %d\n", err);
-+ }
-+ return;
-+ }
-
- sfp->hwmon_name = kstrdup(dev_name(sfp->dev), GFP_KERNEL);
-- if (!sfp->hwmon_name)
-- return -ENODEV;
-+ if (!sfp->hwmon_name) {
-+ dev_err(sfp->dev, "out of memory for hwmon name\n");
-+ return;
-+ }
-
- for (i = 0; sfp->hwmon_name[i]; i++)
- if (hwmon_is_bad_char(sfp->hwmon_name[i]))
-@@ -1126,18 +1126,52 @@ static int sfp_hwmon_insert(struct sfp *
- sfp->hwmon_name, sfp,
- &sfp_hwmon_chip_info,
- NULL);
-+ if (IS_ERR(sfp->hwmon_dev))
-+ dev_err(sfp->dev, "failed to register hwmon device: %ld\n",
-+ PTR_ERR(sfp->hwmon_dev));
-+}
-+
-+static int sfp_hwmon_insert(struct sfp *sfp)
-+{
-+ if (sfp->id.ext.sff8472_compliance == SFP_SFF8472_COMPLIANCE_NONE)
-+ return 0;
-+
-+ if (!(sfp->id.ext.diagmon & SFP_DIAGMON_DDM))
-+ return 0;
-+
-+ if (sfp->id.ext.diagmon & SFP_DIAGMON_ADDRMODE)
-+ /* This driver in general does not support address
-+ * change.
-+ */
-+ return 0;
-+
-+ mod_delayed_work(system_wq, &sfp->hwmon_probe, 1);
-+ sfp->hwmon_tries = R_PROBE_RETRY_SLOW;
-
-- return PTR_ERR_OR_ZERO(sfp->hwmon_dev);
-+ return 0;
- }
-
- static void sfp_hwmon_remove(struct sfp *sfp)
- {
-+ cancel_delayed_work_sync(&sfp->hwmon_probe);
- if (!IS_ERR_OR_NULL(sfp->hwmon_dev)) {
- hwmon_device_unregister(sfp->hwmon_dev);
- sfp->hwmon_dev = NULL;
- kfree(sfp->hwmon_name);
- }
- }
-+
-+static int sfp_hwmon_init(struct sfp *sfp)
-+{
-+ INIT_DELAYED_WORK(&sfp->hwmon_probe, sfp_hwmon_probe);
-+
-+ return 0;
-+}
-+
-+static void sfp_hwmon_exit(struct sfp *sfp)
-+{
-+ cancel_delayed_work_sync(&sfp->hwmon_probe);
-+}
- #else
- static int sfp_hwmon_insert(struct sfp *sfp)
- {
-@@ -1147,6 +1181,15 @@ static int sfp_hwmon_insert(struct sfp *
- static void sfp_hwmon_remove(struct sfp *sfp)
- {
- }
-+
-+static int sfp_hwmon_init(struct sfp *sfp)
-+{
-+ return 0;
-+}
-+
-+static void sfp_hwmon_exit(struct sfp *sfp)
-+{
-+}
- #endif
-
- /* Helpers */
-@@ -1483,10 +1526,6 @@ static int sfp_sm_mod_probe(struct sfp *
- if (ret < 0)
- return ret;
-
-- ret = sfp_hwmon_insert(sfp);
-- if (ret < 0)
-- return ret;
--
- return 0;
- }
-
-@@ -1635,6 +1674,15 @@ static void sfp_sm_module(struct sfp *sf
- case SFP_MOD_ERROR:
- break;
- }
-+
-+#if IS_ENABLED(CONFIG_HWMON)
-+ if (sfp->sm_mod_state >= SFP_MOD_WAITDEV &&
-+ IS_ERR_OR_NULL(sfp->hwmon_dev)) {
-+ err = sfp_hwmon_insert(sfp);
-+ if (err)
-+ dev_warn(sfp->dev, "hwmon probe failed: %d\n", err);
-+ }
-+#endif
- }
-
- static void sfp_sm_main(struct sfp *sfp, unsigned int event)
-@@ -1936,6 +1984,8 @@ static struct sfp *sfp_alloc(struct devi
- INIT_DELAYED_WORK(&sfp->poll, sfp_poll);
- INIT_DELAYED_WORK(&sfp->timeout, sfp_timeout);
-
-+ sfp_hwmon_init(sfp);
-+
- return sfp;
- }
-
-@@ -1943,6 +1993,8 @@ static void sfp_cleanup(void *data)
- {
- struct sfp *sfp = data;
-
-+ sfp_hwmon_exit(sfp);
-+
- cancel_delayed_work_sync(&sfp->poll);
- cancel_delayed_work_sync(&sfp->timeout);
- if (sfp->i2c_mii) {
+++ /dev/null
-From eb156db588ac583cdae7b91eaac9c0ad3a358e63 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Sun, 15 Sep 2019 20:05:34 +0100
-Subject: [PATCH 635/660] net: phy: add core phylib sfp support
-
-Add core phylib help for supporting SFP sockets on PHYs. This provides
-a mechanism to inform the SFP layer about PHY up/down events, and also
-unregister the SFP bus when the PHY is going away.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/phy.c | 7 ++++
- drivers/net/phy/phy_device.c | 66 ++++++++++++++++++++++++++++++++++++
- include/linux/phy.h | 11 ++++++
- 3 files changed, 84 insertions(+)
-
---- a/drivers/net/phy/phy.c
-+++ b/drivers/net/phy/phy.c
-@@ -30,6 +30,7 @@
- #include <linux/ethtool.h>
- #include <linux/phy.h>
- #include <linux/phy_led_triggers.h>
-+#include <linux/sfp.h>
- #include <linux/workqueue.h>
- #include <linux/mdio.h>
- #include <linux/io.h>
-@@ -871,6 +872,9 @@ void phy_stop(struct phy_device *phydev)
- if (phy_interrupt_is_valid(phydev))
- phy_disable_interrupts(phydev);
-
-+ if (phydev->sfp_bus)
-+ sfp_upstream_stop(phydev->sfp_bus);
-+
- phydev->state = PHY_HALTED;
-
- out_unlock:
-@@ -899,6 +903,9 @@ void phy_start(struct phy_device *phydev
-
- mutex_lock(&phydev->lock);
-
-+ if (phydev->sfp_bus)
-+ sfp_upstream_start(phydev->sfp_bus);
-+
- switch (phydev->state) {
- case PHY_STARTING:
- phydev->state = PHY_PENDING;
---- a/drivers/net/phy/phy_device.c
-+++ b/drivers/net/phy/phy_device.c
-@@ -31,6 +31,7 @@
- #include <linux/ethtool.h>
- #include <linux/phy.h>
- #include <linux/phy_led_triggers.h>
-+#include <linux/sfp.h>
- #include <linux/mdio.h>
- #include <linux/io.h>
- #include <linux/uaccess.h>
-@@ -950,6 +951,65 @@ void phy_attached_print(struct phy_devic
- EXPORT_SYMBOL(phy_attached_print);
-
- /**
-+ * phy_sfp_attach - attach the SFP bus to the PHY upstream network device
-+ * @upstream: pointer to the phy device
-+ * @bus: sfp bus representing cage being attached
-+ *
-+ * This is used to fill in the sfp_upstream_ops .attach member.
-+ */
-+void phy_sfp_attach(void *upstream, struct sfp_bus *bus)
-+{
-+ struct phy_device *phydev = upstream;
-+
-+ if (phydev->attached_dev)
-+ phydev->attached_dev->sfp_bus = bus;
-+ phydev->sfp_bus_attached = true;
-+}
-+EXPORT_SYMBOL(phy_sfp_attach);
-+
-+/**
-+ * phy_sfp_detach - detach the SFP bus from the PHY upstream network device
-+ * @upstream: pointer to the phy device
-+ * @bus: sfp bus representing cage being attached
-+ *
-+ * This is used to fill in the sfp_upstream_ops .detach member.
-+ */
-+void phy_sfp_detach(void *upstream, struct sfp_bus *bus)
-+{
-+ struct phy_device *phydev = upstream;
-+
-+ if (phydev->attached_dev)
-+ phydev->attached_dev->sfp_bus = NULL;
-+ phydev->sfp_bus_attached = false;
-+}
-+EXPORT_SYMBOL(phy_sfp_detach);
-+
-+/**
-+ * phy_sfp_probe - probe for a SFP cage attached to this PHY device
-+ * @phydev: Pointer to phy_device
-+ * @ops: SFP's upstream operations
-+ */
-+int phy_sfp_probe(struct phy_device *phydev,
-+ const struct sfp_upstream_ops *ops)
-+{
-+ struct sfp_bus *bus;
-+ int ret;
-+
-+ if (phydev->mdio.dev.fwnode) {
-+ bus = sfp_bus_find_fwnode(phydev->mdio.dev.fwnode);
-+ if (IS_ERR(bus))
-+ return PTR_ERR(bus);
-+
-+ phydev->sfp_bus = bus;
-+
-+ ret = sfp_bus_add_upstream(bus, phydev, ops);
-+ sfp_bus_put(bus);
-+ }
-+ return 0;
-+}
-+EXPORT_SYMBOL(phy_sfp_probe);
-+
-+/**
- * phy_attach_direct - attach a network device to a given PHY device pointer
- * @dev: network device to attach
- * @phydev: Pointer to phy_device to attach
-@@ -1022,6 +1082,9 @@ int phy_attach_direct(struct net_device
- phydev->attached_dev = dev;
- dev->phydev = phydev;
-
-+ if (phydev->sfp_bus_attached)
-+ dev->sfp_bus = phydev->sfp_bus;
-+
- /* Some Ethernet drivers try to connect to a PHY device before
- * calling register_netdevice() -> netdev_register_kobject() and
- * does the dev->dev.kobj initialization. Here we only check for
-@@ -1956,6 +2019,9 @@ static int phy_remove(struct device *dev
- phydev->state = PHY_DOWN;
- mutex_unlock(&phydev->lock);
-
-+ sfp_bus_del_upstream(phydev->sfp_bus);
-+ phydev->sfp_bus = NULL;
-+
- if (phydev->drv && phydev->drv->remove) {
- phydev->drv->remove(phydev);
-
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -184,6 +184,8 @@ static inline const char *phy_modes(phy_
-
- struct device;
- struct phylink;
-+struct sfp_bus;
-+struct sfp_upstream_ops;
- struct sk_buff;
-
- /*
-@@ -383,6 +385,8 @@ struct phy_c45_device_ids {
- * irq: IRQ number of the PHY's interrupt (-1 if none)
- * phy_timer: The timer for handling the state machine
- * phy_queue: A work_queue for the phy_mac_interrupt
-+ * sfp_bus_attached: flag indicating whether the SFP bus has been attached
-+ * sfp_bus: SFP bus attached to this PHY's fiber port
- * attached_dev: The attached enet driver's device instance ptr
- * adjust_link: Callback for the enet controller to respond to
- * changes in the link state.
-@@ -473,6 +477,9 @@ struct phy_device {
-
- struct mutex lock;
-
-+ /* This may be modified under the rtnl lock */
-+ bool sfp_bus_attached;
-+ struct sfp_bus *sfp_bus;
- struct phylink *phylink;
- struct net_device *attached_dev;
-
-@@ -1033,6 +1040,10 @@ int phy_suspend(struct phy_device *phyde
- int phy_resume(struct phy_device *phydev);
- int __phy_resume(struct phy_device *phydev);
- int phy_loopback(struct phy_device *phydev, bool enable);
-+void phy_sfp_attach(void *upstream, struct sfp_bus *bus);
-+void phy_sfp_detach(void *upstream, struct sfp_bus *bus);
-+int phy_sfp_probe(struct phy_device *phydev,
-+ const struct sfp_upstream_ops *ops);
- struct phy_device *phy_attach(struct net_device *dev, const char *bus_id,
- phy_interface_t interface);
- struct phy_device *phy_find_first(struct mii_bus *bus);
+++ /dev/null
-From 0836d9fb41ed90090ef4af0d7abe784ee7706f80 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 14 Apr 2017 14:21:25 +0100
-Subject: [PATCH 636/660] net: phy: marvell10g: add SFP+ support
-
-Add support for SFP+ cages to the Marvell 10G PHY driver. This is
-slightly complicated by the way phylib works in that we need to use
-a multi-step process to attach the SFP bus, and we also need to track
-the phylink state machine to know when the module's transmit disable
-signal should change state.
-
-With appropriate DT changes, this allows the SFP+ canges on the
-Macchiatobin platform to be functional.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/marvell10g.c | 25 ++++++++++++++++++++++++-
- 1 file changed, 24 insertions(+), 1 deletion(-)
-
---- a/drivers/net/phy/marvell10g.c
-+++ b/drivers/net/phy/marvell10g.c
-@@ -25,6 +25,7 @@
- #include <linux/hwmon.h>
- #include <linux/marvell_phy.h>
- #include <linux/phy.h>
-+#include <linux/sfp.h>
-
- enum {
- MV_PMA_BOOT = 0xc050,
-@@ -219,6 +220,28 @@ static int mv3310_hwmon_probe(struct phy
- }
- #endif
-
-+static int mv3310_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
-+{
-+ struct phy_device *phydev = upstream;
-+ __ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, };
-+ phy_interface_t iface;
-+
-+ sfp_parse_support(phydev->sfp_bus, id, support);
-+ iface = sfp_select_interface(phydev->sfp_bus, id, support);
-+
-+ if (iface != PHY_INTERFACE_MODE_10GKR) {
-+ dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n");
-+ return -EINVAL;
-+ }
-+ return 0;
-+}
-+
-+static const struct sfp_upstream_ops mv3310_sfp_ops = {
-+ .attach = phy_sfp_attach,
-+ .detach = phy_sfp_detach,
-+ .module_insert = mv3310_sfp_insert,
-+};
-+
- static int mv3310_probe(struct phy_device *phydev)
- {
- struct mv3310_priv *priv;
-@@ -249,7 +272,7 @@ static int mv3310_probe(struct phy_devic
- if (ret)
- return ret;
-
-- return 0;
-+ return phy_sfp_probe(phydev, &mv3310_sfp_ops);
- }
-
- static int mv3310_suspend(struct phy_device *phydev)
+++ /dev/null
-From 09d7d8395ec61fba4392b35baa6f71c4e36489df Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 8 Nov 2019 15:18:02 +0000
-Subject: [PATCH 637/660] net: phylink: update to use phy_support_asym_pause()
-
-Use phy_support_asym_pause() rather than open-coding it.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/phylink.c | 17 +++++++----------
- 1 file changed, 7 insertions(+), 10 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -678,12 +678,6 @@ static int phylink_bringup_phy(struct ph
- u32 advertising;
- int ret;
-
-- memset(&config, 0, sizeof(config));
-- ethtool_convert_legacy_u32_to_link_mode(supported, phy->supported);
-- ethtool_convert_legacy_u32_to_link_mode(config.advertising,
-- phy->advertising);
-- config.interface = pl->link_config.interface;
--
- /*
- * This is the new way of dealing with flow control for PHYs,
- * as described by Timur Tabi in commit 529ed1275263 ("net: phy:
-@@ -691,10 +685,13 @@ static int phylink_bringup_phy(struct ph
- * using our validate call to the MAC, we rely upon the MAC
- * clearing the bits from both supported and advertising fields.
- */
-- if (phylink_test(supported, Pause))
-- phylink_set(config.advertising, Pause);
-- if (phylink_test(supported, Asym_Pause))
-- phylink_set(config.advertising, Asym_Pause);
-+ phy_support_asym_pause(phy);
-+
-+ memset(&config, 0, sizeof(config));
-+ ethtool_convert_legacy_u32_to_link_mode(supported, phy->supported);
-+ ethtool_convert_legacy_u32_to_link_mode(config.advertising,
-+ phy->advertising);
-+ config.interface = pl->link_config.interface;
-
- ret = phylink_validate(pl, supported, &config);
- if (ret)
+++ /dev/null
-From 1be8018db381200c24854e0c299206c557f76fe0 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Mon, 11 Nov 2019 11:58:09 +0000
-Subject: [PATCH 638/660] net: phy: avoid matching all-ones clause 45 PHY IDs
-
-We currently match clause 45 PHYs using any ID read from a MMD marked
-as present in the "Devices in package" registers 5 and 6. However,
-this is incorrect. 45.2 says:
-
- "The definition of the term package is vendor specific and could be
- a chip, module, or other similar entity."
-
-so a package could be more or less than the whole PHY - a PHY could be
-made up of several modules instantiated onto a single chip such as the
-Marvell 88x3310, or some of the MMDs could be disabled according to
-chip configuration, such as the Broadcom 84881.
-
-In the case of Broadcom 84881, the "Devices in package" registers
-contain 0xc000009b, meaning that there is a PHYXS present in the
-package, but all registers in MMD 4 return 0xffff. This leads to our
-matching code incorrectly binding this PHY to one of our generic PHY
-drivers.
-
-This patch changes the way we determine whether to attempt to match a
-MMD identifier, or use it to request a module - if the identifier is
-all-ones, then we skip over it. When reading the identifiers, we
-initialise phydev->c45_ids.device_ids to all-ones, only reading the
-device ID if the "Devices in package" registers indicates we should.
-
-This avoids the generic drivers incorrectly matching on a PHY ID of
-0xffffffff.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/phy_device.c | 7 +++++--
- 1 file changed, 5 insertions(+), 2 deletions(-)
-
---- a/drivers/net/phy/phy_device.c
-+++ b/drivers/net/phy/phy_device.c
-@@ -339,7 +339,7 @@ static int phy_bus_match(struct device *
-
- if (phydev->is_c45) {
- for (i = 1; i < num_ids; i++) {
-- if (!(phydev->c45_ids.devices_in_package & (1 << i)))
-+ if (phydev->c45_ids.device_ids[i] == 0xffffffff)
- continue;
-
- if ((phydrv->phy_id & phydrv->phy_id_mask) ==
-@@ -629,10 +629,13 @@ static int get_phy_id(struct mii_bus *bu
- */
- struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45)
- {
-- struct phy_c45_device_ids c45_ids = {0};
-+ struct phy_c45_device_ids c45_ids;
- u32 phy_id = 0;
- int r;
-
-+ c45_ids.devices_in_package = 0;
-+ memset(c45_ids.device_ids, 0xff, sizeof(c45_ids.device_ids));
-+
- r = get_phy_id(bus, addr, &phy_id, is_c45, &c45_ids);
- if (r)
- return ERR_PTR(r);
+++ /dev/null
-From 4c9633f75dc35abe1b9261e0415d77802f35741d Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Tue, 5 Nov 2019 11:58:00 +0000
-Subject: [PATCH 639/660] net: phylink: fix link mode modification in PHY mode
-
-Modifying the link settings via phylink_ethtool_ksettings_set() and
-phylink_ethtool_set_pauseparam() didn't always work as intended for
-PHY based setups, as calling phylink_mac_config() would result in the
-unresolved configuration being committed to the MAC, rather than the
-configuration with the speed and duplex setting.
-
-This would work fine if the update caused the link to renegotiate,
-but if no settings have changed, phylib won't trigger a renegotiation
-cycle, and the MAC will be left incorrectly configured.
-
-Avoid calling phylink_mac_config() unless we are using an inband mode
-in phylink_ethtool_ksettings_set(), and use phy_set_asym_pause() as
-introduced in 4.20 to set the PHY settings in
-phylink_ethtool_set_pauseparam().
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/phylink.c | 24 ++++++++++++++++--------
- 1 file changed, 16 insertions(+), 8 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -1210,7 +1210,13 @@ int phylink_ethtool_ksettings_set(struct
- pl->link_config.duplex = our_kset.base.duplex;
- pl->link_config.an_enabled = our_kset.base.autoneg != AUTONEG_DISABLE;
-
-- if (!test_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state)) {
-+ /* If we have a PHY, phylib will call our link state function if the
-+ * mode has changed, which will trigger a resolve and update the MAC
-+ * configuration. For a fixed link, this isn't able to change any
-+ * parameters, which just leaves inband mode.
-+ */
-+ if (pl->link_an_mode == MLO_AN_INBAND &&
-+ !test_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state)) {
- phylink_mac_config(pl, &pl->link_config);
- phylink_mac_an_restart(pl);
- }
-@@ -1290,14 +1296,16 @@ int phylink_ethtool_set_pauseparam(struc
- if (pause->tx_pause)
- config->pause |= MLO_PAUSE_TX;
-
-- if (!test_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state)) {
-+ /* If we have a PHY, phylib will call our link state function if the
-+ * mode has changed, which will trigger a resolve and update the MAC
-+ * configuration.
-+ */
-+ if (pl->phydev) {
-+ phy_set_asym_pause(pl->phydev, pause->rx_pause,
-+ pause->tx_pause);
-+ } else if (!test_bit(PHYLINK_DISABLE_STOPPED,
-+ &pl->phylink_disable_state)) {
- switch (pl->link_an_mode) {
-- case MLO_AN_PHY:
-- /* Silently mark the carrier down, and then trigger a resolve */
-- netif_carrier_off(pl->netdev);
-- phylink_run_resolve(pl);
-- break;
--
- case MLO_AN_FIXED:
- /* Should we allow fixed links to change against the config? */
- phylink_resolve_flow(pl, config);
+++ /dev/null
-From 40e0b3b15f7da92e6b065292b14af7b9bfb1c6e0 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 13 Sep 2019 23:00:35 +0100
-Subject: [PATCH 642/660] net: sfp: soft status and control support
-
-Add support for the soft status and control register, which allows
-TX_FAULT and RX_LOS to be monitored and TX_DISABLE to be set. We
-make use of this when the board does not support GPIOs for these
-signals.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 110 ++++++++++++++++++++++++++++++++++--------
- include/linux/sfp.h | 4 ++
- 2 files changed, 94 insertions(+), 20 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -199,7 +199,10 @@ struct sfp {
- struct gpio_desc *gpio[GPIO_MAX];
- int gpio_irq[GPIO_MAX];
-
-+ bool need_poll;
-+
- struct mutex st_mutex; /* Protects state */
-+ unsigned int state_soft_mask;
- unsigned int state;
- struct delayed_work poll;
- struct delayed_work timeout;
-@@ -393,24 +396,90 @@ static int sfp_i2c_configure(struct sfp
- }
-
- /* Interface */
--static unsigned int sfp_get_state(struct sfp *sfp)
-+static int sfp_read(struct sfp *sfp, bool a2, u8 addr, void *buf, size_t len)
- {
-- return sfp->get_state(sfp);
-+ return sfp->read(sfp, a2, addr, buf, len);
- }
-
--static void sfp_set_state(struct sfp *sfp, unsigned int state)
-+static int sfp_write(struct sfp *sfp, bool a2, u8 addr, void *buf, size_t len)
- {
-- sfp->set_state(sfp, state);
-+ return sfp->write(sfp, a2, addr, buf, len);
- }
-
--static int sfp_read(struct sfp *sfp, bool a2, u8 addr, void *buf, size_t len)
-+static unsigned int sfp_soft_get_state(struct sfp *sfp)
- {
-- return sfp->read(sfp, a2, addr, buf, len);
-+ unsigned int state = 0;
-+ u8 status;
-+
-+ if (sfp_read(sfp, true, SFP_STATUS, &status, sizeof(status)) ==
-+ sizeof(status)) {
-+ if (status & SFP_STATUS_RX_LOS)
-+ state |= SFP_F_LOS;
-+ if (status & SFP_STATUS_TX_FAULT)
-+ state |= SFP_F_TX_FAULT;
-+ }
-+
-+ return state & sfp->state_soft_mask;
- }
-
--static int sfp_write(struct sfp *sfp, bool a2, u8 addr, void *buf, size_t len)
-+static void sfp_soft_set_state(struct sfp *sfp, unsigned int state)
- {
-- return sfp->write(sfp, a2, addr, buf, len);
-+ u8 status;
-+
-+ if (sfp_read(sfp, true, SFP_STATUS, &status, sizeof(status)) ==
-+ sizeof(status)) {
-+ if (state & SFP_F_TX_DISABLE)
-+ status |= SFP_STATUS_TX_DISABLE_FORCE;
-+ else
-+ status &= ~SFP_STATUS_TX_DISABLE_FORCE;
-+
-+ sfp_write(sfp, true, SFP_STATUS, &status, sizeof(status));
-+ }
-+}
-+
-+static void sfp_soft_start_poll(struct sfp *sfp)
-+{
-+ const struct sfp_eeprom_id *id = &sfp->id;
-+
-+ sfp->state_soft_mask = 0;
-+ if (id->ext.enhopts & SFP_ENHOPTS_SOFT_TX_DISABLE &&
-+ !sfp->gpio[GPIO_TX_DISABLE])
-+ sfp->state_soft_mask |= SFP_F_TX_DISABLE;
-+ if (id->ext.enhopts & SFP_ENHOPTS_SOFT_TX_FAULT &&
-+ !sfp->gpio[GPIO_TX_FAULT])
-+ sfp->state_soft_mask |= SFP_F_TX_FAULT;
-+ if (id->ext.enhopts & SFP_ENHOPTS_SOFT_RX_LOS &&
-+ !sfp->gpio[GPIO_LOS])
-+ sfp->state_soft_mask |= SFP_F_LOS;
-+
-+ if (sfp->state_soft_mask & (SFP_F_LOS | SFP_F_TX_FAULT) &&
-+ !sfp->need_poll)
-+ mod_delayed_work(system_wq, &sfp->poll, poll_jiffies);
-+}
-+
-+static void sfp_soft_stop_poll(struct sfp *sfp)
-+{
-+ sfp->state_soft_mask = 0;
-+}
-+
-+static unsigned int sfp_get_state(struct sfp *sfp)
-+{
-+ unsigned int state = sfp->get_state(sfp);
-+
-+ if (state & SFP_F_PRESENT &&
-+ sfp->state_soft_mask & (SFP_F_LOS | SFP_F_TX_FAULT))
-+ state |= sfp_soft_get_state(sfp);
-+
-+ return state;
-+}
-+
-+static void sfp_set_state(struct sfp *sfp, unsigned int state)
-+{
-+ sfp->set_state(sfp, state);
-+
-+ if (state & SFP_F_PRESENT &&
-+ sfp->state_soft_mask & SFP_F_TX_DISABLE)
-+ sfp_soft_set_state(sfp, state);
- }
-
- static unsigned int sfp_check(void *buf, size_t len)
-@@ -1342,11 +1411,6 @@ static void sfp_sm_fault(struct sfp *sfp
- }
- }
-
--static void sfp_sm_mod_init(struct sfp *sfp)
--{
-- sfp_module_tx_enable(sfp);
--}
--
- static void sfp_sm_probe_for_phy(struct sfp *sfp)
- {
- /* Setting the serdes link mode is guesswork: there's no
-@@ -1509,7 +1573,7 @@ static int sfp_sm_mod_probe(struct sfp *
- (int)sizeof(id.ext.datecode), id.ext.datecode);
-
- /* Check whether we support this module */
-- if (!sfp->type->module_supported(&sfp->id)) {
-+ if (!sfp->type->module_supported(&id)) {
- dev_err(sfp->dev,
- "module is not supported - phys id 0x%02x 0x%02x\n",
- sfp->id.base.phys_id, sfp->id.base.phys_ext_id);
-@@ -1699,6 +1763,7 @@ static void sfp_sm_main(struct sfp *sfp,
- if (sfp->mod_phy)
- sfp_sm_phy_detach(sfp);
- sfp_module_tx_disable(sfp);
-+ sfp_soft_stop_poll(sfp);
- sfp_sm_next(sfp, SFP_S_DOWN, 0);
- return;
- }
-@@ -1710,7 +1775,10 @@ static void sfp_sm_main(struct sfp *sfp,
- sfp->sm_dev_state != SFP_DEV_UP)
- break;
-
-- sfp_sm_mod_init(sfp);
-+ if (!(sfp->id.ext.diagmon & SFP_DIAGMON_ADDRMODE))
-+ sfp_soft_start_poll(sfp);
-+
-+ sfp_module_tx_enable(sfp);
-
- /* Initialise the fault clearance retries */
- sfp->sm_retries = 5;
-@@ -1966,7 +2034,10 @@ static void sfp_poll(struct work_struct
- struct sfp *sfp = container_of(work, struct sfp, poll.work);
-
- sfp_check_state(sfp);
-- mod_delayed_work(system_wq, &sfp->poll, poll_jiffies);
-+
-+ if (sfp->state_soft_mask & (SFP_F_LOS | SFP_F_TX_FAULT) ||
-+ sfp->need_poll)
-+ mod_delayed_work(system_wq, &sfp->poll, poll_jiffies);
- }
-
- static struct sfp *sfp_alloc(struct device *dev)
-@@ -2010,7 +2081,6 @@ static int sfp_probe(struct platform_dev
- {
- const struct sff_data *sff;
- struct sfp *sfp;
-- bool poll = false;
- int err, i;
-
- sfp = sfp_alloc(&pdev->dev);
-@@ -2100,7 +2170,7 @@ static int sfp_probe(struct platform_dev
-
- sfp->gpio_irq[i] = gpiod_to_irq(sfp->gpio[i]);
- if (!sfp->gpio_irq[i]) {
-- poll = true;
-+ sfp->need_poll = true;
- continue;
- }
-
-@@ -2112,11 +2182,11 @@ static int sfp_probe(struct platform_dev
- dev_name(sfp->dev), sfp);
- if (err) {
- sfp->gpio_irq[i] = 0;
-- poll = true;
-+ sfp->need_poll = true;
- }
- }
-
-- if (poll)
-+ if (sfp->need_poll)
- mod_delayed_work(system_wq, &sfp->poll, poll_jiffies);
-
- /* We could have an issue in cases no Tx disable pin is available or
---- a/include/linux/sfp.h
-+++ b/include/linux/sfp.h
-@@ -428,6 +428,10 @@ enum {
- SFP_TEC_CUR = 0x6c,
-
- SFP_STATUS = 0x6e,
-+ SFP_STATUS_TX_DISABLE = BIT(7),
-+ SFP_STATUS_TX_DISABLE_FORCE = BIT(6),
-+ SFP_STATUS_TX_FAULT = BIT(2),
-+ SFP_STATUS_RX_LOS = BIT(1),
- SFP_ALARM0 = 0x70,
- SFP_ALARM0_TEMP_HIGH = BIT(7),
- SFP_ALARM0_TEMP_LOW = BIT(6),
+++ /dev/null
-From: Christopher Hill <ch6574@gmail.com>
-To: Mark Brown <broonie@kernel.org>
-Cc: Christopher Hill <ch6574@gmail.com>, linux-spi@vger.kernel.org,
- linux-kernel@vger.kernel.org
-Subject: [PATCH 1/3] spi: rb4xx: null pointer bug fix
-Date: Thu, 21 May 2020 14:36:29 -0400
-Message-Id: <20200521183631.37806-1-ch6574@gmail.com>
-X-Mailer: git-send-email 2.25.1
-MIME-Version: 1.0
-Sender: linux-spi-owner@vger.kernel.org
-Precedence: bulk
-List-ID: <linux-spi.vger.kernel.org>
-X-Mailing-List: linux-spi@vger.kernel.org
-
-This patch fixes a null pointer bug in the spi driver spi-rb4xx.c by
-moving the private data initialization to earlier in probe
-
-Signed-off-by: Christopher Hill <ch6574@gmail.com>
----
- drivers/spi/spi-rb4xx.c | 10 +++++-----
- 1 file changed, 5 insertions(+), 5 deletions(-)
-
---- a/drivers/spi/spi-rb4xx.c
-+++ b/drivers/spi/spi-rb4xx.c
-@@ -164,6 +164,11 @@ static int rb4xx_spi_probe(struct platfo
- master->transfer_one = rb4xx_transfer_one;
- master->set_cs = rb4xx_set_cs;
-
-+ rbspi = spi_master_get_devdata(master);
-+ rbspi->base = spi_base;
-+ rbspi->clk = ahb_clk;
-+ platform_set_drvdata(pdev, rbspi);
-+
- err = devm_spi_register_master(&pdev->dev, master);
- if (err) {
- dev_err(&pdev->dev, "failed to register SPI master\n");
-@@ -174,11 +179,6 @@ static int rb4xx_spi_probe(struct platfo
- if (err)
- return err;
-
-- rbspi = spi_master_get_devdata(master);
-- rbspi->base = spi_base;
-- rbspi->clk = ahb_clk;
-- platform_set_drvdata(pdev, rbspi);
--
- /* Enable SPI */
- rb4xx_write(rbspi, AR71XX_SPI_REG_FS, AR71XX_SPI_FS_GPIO);
-
+++ /dev/null
-From: Christopher Hill <ch6574@gmail.com>
-To: Mark Brown <broonie@kernel.org>
-Cc: Christopher Hill <ch6574@gmail.com>, linux-spi@vger.kernel.org,
- linux-kernel@vger.kernel.org
-Subject: [PATCH 2/3] spi: rb4xx: update driver to be device tree aware
-Date: Thu, 21 May 2020 14:36:30 -0400
-Message-Id: <20200521183631.37806-2-ch6574@gmail.com>
-X-Mailer: git-send-email 2.25.1
-In-Reply-To: <20200521183631.37806-1-ch6574@gmail.com>
-References: <20200521183631.37806-1-ch6574@gmail.com>
-MIME-Version: 1.0
-Sender: linux-spi-owner@vger.kernel.org
-Precedence: bulk
-List-ID: <linux-spi.vger.kernel.org>
-X-Mailing-List: linux-spi@vger.kernel.org
-
-This patch updates the spi driver spi-rb4xx.c to be device tree aware
-
-Signed-off-by: Christopher Hill <ch6574@gmail.com>
----
- drivers/spi/spi-rb4xx.c | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/drivers/spi/spi-rb4xx.c
-+++ b/drivers/spi/spi-rb4xx.c
-@@ -18,6 +18,7 @@
- #include <linux/platform_device.h>
- #include <linux/clk.h>
- #include <linux/spi/spi.h>
-+#include <linux/of.h>
-
- #include <asm/mach-ath79/ar71xx_regs.h>
-
-@@ -156,6 +157,7 @@ static int rb4xx_spi_probe(struct platfo
- if (IS_ERR(ahb_clk))
- return PTR_ERR(ahb_clk);
-
-+ master->dev.of_node = pdev->dev.of_node;
- master->bus_num = 0;
- master->num_chipselect = 3;
- master->mode_bits = SPI_TX_DUAL;
-@@ -194,11 +196,18 @@ static int rb4xx_spi_remove(struct platf
- return 0;
- }
-
-+static const struct of_device_id rb4xx_spi_dt_match[] = {
-+ { .compatible = "mikrotik,rb4xx-spi" },
-+ { },
-+};
-+MODULE_DEVICE_TABLE(of, rb4xx_spi_dt_match);
-+
- static struct platform_driver rb4xx_spi_drv = {
- .probe = rb4xx_spi_probe,
- .remove = rb4xx_spi_remove,
- .driver = {
- .name = "rb4xx-spi",
-+ .of_match_table = of_match_ptr(rb4xx_spi_dt_match),
- },
- };
-
+++ /dev/null
-# CONFIG_104_QUAD_8 is not set
-CONFIG_32BIT=y
-# CONFIG_6LOWPAN is not set
-# CONFIG_6LOWPAN_DEBUGFS is not set
-# CONFIG_6PACK is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_9P_FS is not set
-# CONFIG_AB3100_CORE is not set
-# CONFIG_AB8500_CORE is not set
-# CONFIG_ABP060MG is not set
-# CONFIG_ABX500_CORE is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_ACENIC is not set
-# CONFIG_ACERHDF is not set
-# CONFIG_ACER_WIRELESS is not set
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_ACPI_ALS is not set
-# CONFIG_ACPI_APEI is not set
-# CONFIG_ACPI_BUTTON is not set
-# CONFIG_ACPI_CONFIGFS is not set
-# CONFIG_ACPI_CUSTOM_METHOD is not set
-# CONFIG_ACPI_EXTLOG is not set
-# CONFIG_ACPI_HED is not set
-# CONFIG_ACPI_NFIT is not set
-# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
-# CONFIG_ACPI_TABLE_UPGRADE is not set
-# CONFIG_ACPI_VIDEO is not set
-# CONFIG_AD2S1200 is not set
-# CONFIG_AD2S1210 is not set
-# CONFIG_AD2S90 is not set
-# CONFIG_AD5064 is not set
-# CONFIG_AD525X_DPOT is not set
-# CONFIG_AD5272 is not set
-# CONFIG_AD5360 is not set
-# CONFIG_AD5380 is not set
-# CONFIG_AD5421 is not set
-# CONFIG_AD5446 is not set
-# CONFIG_AD5449 is not set
-# CONFIG_AD5504 is not set
-# CONFIG_AD5592R is not set
-# CONFIG_AD5593R is not set
-# CONFIG_AD5624R_SPI is not set
-# CONFIG_AD5686 is not set
-# CONFIG_AD5686_SPI is not set
-# CONFIG_AD5696_I2C is not set
-# CONFIG_AD5755 is not set
-# CONFIG_AD5758 is not set
-# CONFIG_AD5761 is not set
-# CONFIG_AD5764 is not set
-# CONFIG_AD5791 is not set
-# CONFIG_AD5933 is not set
-# CONFIG_AD7150 is not set
-# CONFIG_AD7152 is not set
-# CONFIG_AD7192 is not set
-# CONFIG_AD7266 is not set
-# CONFIG_AD7280 is not set
-# CONFIG_AD7291 is not set
-# CONFIG_AD7298 is not set
-# CONFIG_AD7303 is not set
-# CONFIG_AD7476 is not set
-# CONFIG_AD7606 is not set
-# CONFIG_AD7746 is not set
-# CONFIG_AD7766 is not set
-# CONFIG_AD7780 is not set
-# CONFIG_AD7791 is not set
-# CONFIG_AD7793 is not set
-# CONFIG_AD7816 is not set
-# CONFIG_AD7887 is not set
-# CONFIG_AD7923 is not set
-# CONFIG_AD799X is not set
-# CONFIG_AD8366 is not set
-# CONFIG_AD8801 is not set
-# CONFIG_AD9523 is not set
-# CONFIG_AD9832 is not set
-# CONFIG_AD9834 is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_ADE7854 is not set
-# CONFIG_ADF4350 is not set
-# CONFIG_ADFS_FS is not set
-# CONFIG_ADIS16080 is not set
-# CONFIG_ADIS16130 is not set
-# CONFIG_ADIS16136 is not set
-# CONFIG_ADIS16201 is not set
-# CONFIG_ADIS16203 is not set
-# CONFIG_ADIS16209 is not set
-# CONFIG_ADIS16240 is not set
-# CONFIG_ADIS16260 is not set
-# CONFIG_ADIS16400 is not set
-# CONFIG_ADIS16480 is not set
-# CONFIG_ADJD_S311 is not set
-# CONFIG_ADM6996_PHY is not set
-# CONFIG_ADM8211 is not set
-# CONFIG_ADT7316 is not set
-CONFIG_ADVISE_SYSCALLS=y
-# CONFIG_ADXL345_I2C is not set
-# CONFIG_ADXL345_SPI is not set
-# CONFIG_ADXRS450 is not set
-CONFIG_AEABI=y
-# CONFIG_AFE4403 is not set
-# CONFIG_AFE4404 is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_AF_KCM is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_AF_RXRPC_INJECT_LOSS is not set
-# CONFIG_AF_RXRPC_IPV6 is not set
-# CONFIG_AGP is not set
-# CONFIG_AHCI_CEVA is not set
-# CONFIG_AHCI_IMX is not set
-# CONFIG_AHCI_MVEBU is not set
-# CONFIG_AHCI_QORIQ is not set
-CONFIG_AIO=y
-# CONFIG_AIRO is not set
-# CONFIG_AIRO_CS is not set
-# CONFIG_AIX_PARTITION is not set
-# CONFIG_AK09911 is not set
-# CONFIG_AK8974 is not set
-# CONFIG_AK8975 is not set
-# CONFIG_AL3320A is not set
-# CONFIG_ALIM7101_WDT is not set
-CONFIG_ALLOW_DEV_COREDUMP=y
-# CONFIG_ALTERA_MBOX is not set
-# CONFIG_ALTERA_MSGDMA is not set
-# CONFIG_ALTERA_STAPL is not set
-# CONFIG_ALTERA_TSE is not set
-# CONFIG_ALX is not set
-# CONFIG_AM2315 is not set
-# CONFIG_AM335X_PHY_USB is not set
-# CONFIG_AMBA_PL08X is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_AMD_MEM_ENCRYPT is not set
-# CONFIG_AMD_PHY is not set
-# CONFIG_AMD_XGBE is not set
-# CONFIG_AMD_XGBE_HAVE_ECC is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_AMILO_RFKILL is not set
-# CONFIG_ANDROID is not set
-CONFIG_ANON_INODES=y
-# CONFIG_APDS9300 is not set
-# CONFIG_APDS9802ALS is not set
-# CONFIG_APDS9960 is not set
-# CONFIG_APM8018X is not set
-# CONFIG_APM_EMULATION is not set
-# CONFIG_APPLE_GMUX is not set
-# CONFIG_APPLE_PROPERTIES is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_AQTION is not set
-# CONFIG_AQUANTIA_PHY is not set
-# CONFIG_AR5523 is not set
-# CONFIG_AR7 is not set
-# CONFIG_AR8216_PHY is not set
-# CONFIG_AR8216_PHY_LEDS is not set
-# CONFIG_ARCH_ACTIONS is not set
-# CONFIG_ARCH_ALPINE is not set
-# CONFIG_ARCH_ARTPEC is not set
-# CONFIG_ARCH_ASPEED is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCM is not set
-# CONFIG_ARCH_BCM2835 is not set
-# CONFIG_ARCH_BCM_21664 is not set
-# CONFIG_ARCH_BCM_23550 is not set
-# CONFIG_ARCH_BCM_281XX is not set
-# CONFIG_ARCH_BCM_5301X is not set
-# CONFIG_ARCH_BCM_53573 is not set
-# CONFIG_ARCH_BCM_63XX is not set
-# CONFIG_ARCH_BCM_CYGNUS is not set
-# CONFIG_ARCH_BCM_IPROC is not set
-# CONFIG_ARCH_BCM_NSP is not set
-# CONFIG_ARCH_BERLIN is not set
-# CONFIG_ARCH_BRCMSTB is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CNS3XXX is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_DIGICOLOR is not set
-# CONFIG_ARCH_DMA_ADDR_T_64BIT is not set
-# CONFIG_ARCH_DOVE is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_EXYNOS is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_GEMINI is not set
-CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
-# CONFIG_ARCH_HI3xxx is not set
-# CONFIG_ARCH_HIGHBANK is not set
-# CONFIG_ARCH_HISI is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_K3 is not set
-# CONFIG_ARCH_KEYSTONE is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_LAYERSCAPE is not set
-# CONFIG_ARCH_LG1K is not set
-# CONFIG_ARCH_LPC32XX is not set
-# CONFIG_ARCH_MEDIATEK is not set
-# CONFIG_ARCH_MESON is not set
-CONFIG_ARCH_MMAP_RND_BITS=8
-CONFIG_ARCH_MMAP_RND_BITS_MAX=16
-CONFIG_ARCH_MMAP_RND_BITS_MIN=8
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_MULTIPLATFORM is not set
-# CONFIG_ARCH_MULTI_V6 is not set
-# CONFIG_ARCH_MULTI_V7 is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MVEBU is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_MXS is not set
-# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_NPCM is not set
-# CONFIG_ARCH_NSPIRE is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_OMAP1 is not set
-# CONFIG_ARCH_OMAP2 is not set
-# CONFIG_ARCH_OMAP2PLUS is not set
-# CONFIG_ARCH_OMAP3 is not set
-# CONFIG_ARCH_OMAP4 is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_OXNAS is not set
-# CONFIG_ARCH_PICOXCELL is not set
-# CONFIG_ARCH_PRIMA2 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_QCOM is not set
-# CONFIG_ARCH_REALTEK is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_RENESAS is not set
-# CONFIG_ARCH_ROCKCHIP is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_S3C24XX is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_S5PV210 is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_SEATTLE is not set
-# CONFIG_ARCH_SHMOBILE is not set
-# CONFIG_ARCH_SIRF is not set
-# CONFIG_ARCH_SOCFPGA is not set
-# CONFIG_ARCH_SPRD is not set
-# CONFIG_ARCH_STI is not set
-# CONFIG_ARCH_STM32 is not set
-# CONFIG_ARCH_STRATIX10 is not set
-# CONFIG_ARCH_SUNXI is not set
-# CONFIG_ARCH_SYNQUACER is not set
-# CONFIG_ARCH_TANGO is not set
-# CONFIG_ARCH_TEGRA is not set
-# CONFIG_ARCH_THUNDER is not set
-# CONFIG_ARCH_THUNDER2 is not set
-# CONFIG_ARCH_U300 is not set
-# CONFIG_ARCH_U8500 is not set
-# CONFIG_ARCH_UNIPHIER is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_VEXPRESS is not set
-# CONFIG_ARCH_VIRT is not set
-# CONFIG_ARCH_VT8500 is not set
-# CONFIG_ARCH_VULCAN is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCH_WANTS_THP_SWAP is not set
-# CONFIG_ARCH_WM8505 is not set
-# CONFIG_ARCH_WM8750 is not set
-# CONFIG_ARCH_WM8850 is not set
-# CONFIG_ARCH_XGENE is not set
-# CONFIG_ARCH_ZX is not set
-# CONFIG_ARCH_ZYNQ is not set
-# CONFIG_ARCH_ZYNQMP is not set
-# CONFIG_ARCNET is not set
-# CONFIG_ARC_EMAC is not set
-# CONFIG_ARC_IRQ_NO_AUTOSAVE is not set
-# CONFIG_ARM64_ERRATUM_1024718 is not set
-# CONFIG_ARM64_ERRATUM_1463225 is not set
-# CONFIG_ARM64_ERRATUM_819472 is not set
-# CONFIG_ARM64_ERRATUM_824069 is not set
-# CONFIG_ARM64_ERRATUM_826319 is not set
-# CONFIG_ARM64_ERRATUM_827319 is not set
-# CONFIG_ARM64_ERRATUM_832075 is not set
-# CONFIG_ARM64_ERRATUM_834220 is not set
-# CONFIG_ARM64_ERRATUM_843419 is not set
-# CONFIG_ARM64_ERRATUM_845719 is not set
-# CONFIG_ARM64_ERRATUM_858921 is not set
-# CONFIG_ARM64_RAS_EXTN is not set
-# CONFIG_ARM64_RELOC_TEST is not set
-CONFIG_ARM64_SW_TTBR0_PAN=y
-# CONFIG_ARM_APPENDED_DTB is not set
-# CONFIG_ARM_ARCH_TIMER is not set
-# CONFIG_ARM_BIG_LITTLE_CPUFREQ is not set
-# CONFIG_ARM_CCI is not set
-# CONFIG_ARM_CCI400_PMU is not set
-# CONFIG_ARM_CCI5xx_PMU is not set
-# CONFIG_ARM_CCI_PMU is not set
-# CONFIG_ARM_CCN is not set
-# CONFIG_ARM_CPUIDLE is not set
-CONFIG_ARM_CPU_TOPOLOGY=y
-# CONFIG_ARM_CRYPTO is not set
-CONFIG_ARM_DMA_MEM_BUFFERABLE=y
-# CONFIG_ARM_DSU_PMU is not set
-# CONFIG_ARM_ERRATA_326103 is not set
-# CONFIG_ARM_ERRATA_364296 is not set
-# CONFIG_ARM_ERRATA_411920 is not set
-# CONFIG_ARM_ERRATA_430973 is not set
-# CONFIG_ARM_ERRATA_458693 is not set
-# CONFIG_ARM_ERRATA_460075 is not set
-# CONFIG_ARM_ERRATA_643719 is not set
-# CONFIG_ARM_ERRATA_720789 is not set
-# CONFIG_ARM_ERRATA_742230 is not set
-# CONFIG_ARM_ERRATA_742231 is not set
-# CONFIG_ARM_ERRATA_743622 is not set
-# CONFIG_ARM_ERRATA_751472 is not set
-# CONFIG_ARM_ERRATA_754322 is not set
-# CONFIG_ARM_ERRATA_754327 is not set
-# CONFIG_ARM_ERRATA_764369 is not set
-# CONFIG_ARM_ERRATA_773022 is not set
-# CONFIG_ARM_ERRATA_775420 is not set
-# CONFIG_ARM_ERRATA_798181 is not set
-# CONFIG_ARM_ERRATA_818325_852422 is not set
-# CONFIG_ARM_ERRATA_821420 is not set
-# CONFIG_ARM_ERRATA_825619 is not set
-# CONFIG_ARM_ERRATA_852421 is not set
-# CONFIG_ARM_ERRATA_852423 is not set
-CONFIG_ARM_GIC_MAX_NR=1
-# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set
-# CONFIG_ARM_KPROBES_TEST is not set
-# CONFIG_ARM_MHU is not set
-# CONFIG_ARM_MODULE_PLTS is not set
-# CONFIG_ARM_PATCH_PHYS_VIRT is not set
-# CONFIG_ARM_PSCI is not set
-# CONFIG_ARM_PSCI_CHECKER is not set
-# CONFIG_ARM_PTDUMP_DEBUGFS is not set
-# CONFIG_ARM_SBSA_WATCHDOG is not set
-# CONFIG_ARM_SCPI_PROTOCOL is not set
-# CONFIG_ARM_SDE_INTERFACE is not set
-# CONFIG_ARM_SPE_PMU is not set
-# CONFIG_ARM_TIMER_SP804 is not set
-# CONFIG_ARM_UNWIND is not set
-# CONFIG_ARM_VIRT_EXT is not set
-# CONFIG_AS3935 is not set
-# CONFIG_ASM9260_TIMER is not set
-# CONFIG_ASUS_LAPTOP is not set
-# CONFIG_ASUS_WIRELESS is not set
-# CONFIG_ASYMMETRIC_KEY_TYPE is not set
-# CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE is not set
-# CONFIG_ASYNC_RAID6_TEST is not set
-# CONFIG_ASYNC_TX_DMA is not set
-# CONFIG_AT76C50X_USB is not set
-# CONFIG_AT803X_PHY is not set
-# CONFIG_AT91_SAMA5D2_ADC is not set
-# CONFIG_ATA is not set
-# CONFIG_ATAGS is not set
-CONFIG_ATAGS_PROC=y
-# CONFIG_ATALK is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_ATA_ACPI is not set
-CONFIG_ATA_BMDMA=y
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_ATA_LEDS is not set
-# CONFIG_ATA_NONSTANDARD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_ATA_PIIX is not set
-CONFIG_ATA_SFF=y
-# CONFIG_ATA_VERBOSE_ERROR is not set
-# CONFIG_ATH10K is not set
-# CONFIG_ATH25 is not set
-# CONFIG_ATH5K is not set
-# CONFIG_ATH6KL is not set
-# CONFIG_ATH79 is not set
-# CONFIG_ATH9K is not set
-# CONFIG_ATH9K_HTC is not set
-# CONFIG_ATH_DEBUG is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1C is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL2 is not set
-# CONFIG_ATLAS_PH_SENSOR is not set
-# CONFIG_ATM is not set
-# CONFIG_ATMEL is not set
-# CONFIG_ATMEL_PIT is not set
-# CONFIG_ATMEL_SSC is not set
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_ATM_BR2684 is not set
-CONFIG_ATM_BR2684_IPFILTER=y
-# CONFIG_ATM_CLIP is not set
-CONFIG_ATM_CLIP_NO_ICMP=y
-# CONFIG_ATM_DRIVERS is not set
-# CONFIG_ATM_DUMMY is not set
-# CONFIG_ATM_ENI is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_FORE200E is not set
-# CONFIG_ATM_HE is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_IA is not set
-# CONFIG_ATM_IDT77252 is not set
-# CONFIG_ATM_LANAI is not set
-# CONFIG_ATM_LANE is not set
-# CONFIG_ATM_MPOA is not set
-# CONFIG_ATM_NICSTAR is not set
-# CONFIG_ATM_SOLOS is not set
-# CONFIG_ATM_TCP is not set
-# CONFIG_ATM_ZATM is not set
-# CONFIG_ATOMIC64_SELFTEST is not set
-# CONFIG_ATP is not set
-# CONFIG_AUDIT is not set
-# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
-# CONFIG_AURORA_NB8800 is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTO_ZRELADDR is not set
-# CONFIG_AUXDISPLAY is not set
-# CONFIG_AX25 is not set
-# CONFIG_AX25_DAMA_SLAVE is not set
-# CONFIG_AX88796 is not set
-# CONFIG_AX88796B_PHY is not set
-# CONFIG_AXP20X_ADC is not set
-# CONFIG_AXP20X_POWER is not set
-# CONFIG_AXP288_ADC is not set
-# CONFIG_AXP288_FUEL_GAUGE is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_B44 is not set
-# CONFIG_B53 is not set
-# CONFIG_BACKLIGHT_ADP8860 is not set
-# CONFIG_BACKLIGHT_ADP8870 is not set
-# CONFIG_BACKLIGHT_APPLE is not set
-# CONFIG_BACKLIGHT_ARCXCNN is not set
-# CONFIG_BACKLIGHT_BD6107 is not set
-# CONFIG_BACKLIGHT_GENERIC is not set
-# CONFIG_BACKLIGHT_GPIO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-# CONFIG_BACKLIGHT_LM3630A is not set
-# CONFIG_BACKLIGHT_LM3639 is not set
-# CONFIG_BACKLIGHT_LP855X is not set
-# CONFIG_BACKLIGHT_LV5207LP is not set
-# CONFIG_BACKLIGHT_PANDORA is not set
-# CONFIG_BACKLIGHT_PM8941_WLED is not set
-# CONFIG_BACKLIGHT_PWM is not set
-# CONFIG_BACKLIGHT_RPI is not set
-# CONFIG_BACKLIGHT_SAHARA is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-CONFIG_BASE_FULL=y
-CONFIG_BASE_SMALL=0
-# CONFIG_BATMAN_ADV is not set
-# CONFIG_BATTERY_BQ27XXX is not set
-# CONFIG_BATTERY_BQ27XXX_HDQ is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_DS2780 is not set
-# CONFIG_BATTERY_DS2781 is not set
-# CONFIG_BATTERY_DS2782 is not set
-# CONFIG_BATTERY_GAUGE_LTC2941 is not set
-# CONFIG_BATTERY_GOLDFISH is not set
-# CONFIG_BATTERY_LEGO_EV3 is not set
-# CONFIG_BATTERY_MAX17040 is not set
-# CONFIG_BATTERY_MAX17042 is not set
-# CONFIG_BATTERY_MAX1721X is not set
-# CONFIG_BATTERY_SBS is not set
-# CONFIG_BAYCOM_EPP is not set
-# CONFIG_BAYCOM_PAR is not set
-# CONFIG_BAYCOM_SER_FDX is not set
-# CONFIG_BAYCOM_SER_HDX is not set
-# CONFIG_BCACHE is not set
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-# CONFIG_BCM63XX_PHY is not set
-# CONFIG_BCM7038_WDT is not set
-# CONFIG_BCM7XXX_PHY is not set
-# CONFIG_BCM84881_PHY is not set
-# CONFIG_BCM87XX_PHY is not set
-# CONFIG_BCMA is not set
-# CONFIG_BCMA_DRIVER_GPIO is not set
-CONFIG_BCMA_POSSIBLE=y
-# CONFIG_BCMGENET is not set
-# CONFIG_BCM_IPROC_ADC is not set
-# CONFIG_BCM_KONA_USB2_PHY is not set
-# CONFIG_BCM_SBA_RAID is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_BE2ISCSI is not set
-# CONFIG_BE2NET is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_BGMAC is not set
-# CONFIG_BH1750 is not set
-# CONFIG_BH1780 is not set
-# CONFIG_BIG_KEYS is not set
-# CONFIG_BIG_LITTLE is not set
-# CONFIG_BINARY_PRINTF is not set
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_ELF_FDPIC is not set
-# CONFIG_BINFMT_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
-CONFIG_BINFMT_SCRIPT=y
-CONFIG_BITREVERSE=y
-# CONFIG_BLK_CGROUP_IOLATENCY is not set
-# CONFIG_BLK_CMDLINE_PARSER is not set
-# CONFIG_BLK_DEBUG_FS is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_BLK_DEV_4DRIVES is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI14XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_ATIIXP is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_BSGLIB is not set
-# CONFIG_BLK_DEV_CMD640 is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_CS5535 is not set
-# CONFIG_BLK_DEV_CS5536 is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_DELKIN is not set
-# CONFIG_BLK_DEV_DRBD is not set
-# CONFIG_BLK_DEV_DTC2278 is not set
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_HT6560B is not set
-# CONFIG_BLK_DEV_IDEACPI is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_BLK_DEV_IDEPNP is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDE_AU1XXX is not set
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_NULL_BLK is not set
-# CONFIG_BLK_DEV_NVME is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_PMEM is not set
-# CONFIG_BLK_DEV_QD65XX is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_RBD is not set
-# CONFIG_BLK_DEV_RSXX is not set
-# CONFIG_BLK_DEV_RZ1000 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SIS5513 is not set
-# CONFIG_BLK_DEV_SKD is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_BLK_DEV_THROTTLING is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_UMC8672 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_ZONED is not set
-# CONFIG_BLK_SED_OPAL is not set
-# CONFIG_BLK_WBT is not set
-CONFIG_BLOCK=y
-# CONFIG_BMA180 is not set
-# CONFIG_BMA220 is not set
-# CONFIG_BMC150_ACCEL is not set
-# CONFIG_BMC150_MAGN is not set
-# CONFIG_BMC150_MAGN_I2C is not set
-# CONFIG_BMC150_MAGN_SPI is not set
-# CONFIG_BME680 is not set
-# CONFIG_BMG160 is not set
-# CONFIG_BMI160_I2C is not set
-# CONFIG_BMI160_SPI is not set
-# CONFIG_BMIPS_GENERIC is not set
-# CONFIG_BMP280 is not set
-# CONFIG_BNA is not set
-# CONFIG_BNX2 is not set
-# CONFIG_BNX2X is not set
-# CONFIG_BNX2X_SRIOV is not set
-# CONFIG_BNXT is not set
-# CONFIG_BONDING is not set
-# CONFIG_BOOKE_WDT is not set
-CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT=3
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-CONFIG_BOOT_RAW=y
-CONFIG_BPF=y
-# CONFIG_BPFILTER is not set
-CONFIG_BPF_JIT=y
-# CONFIG_BPF_JIT_ALWAYS_ON is not set
-# CONFIG_BPF_STREAM_PARSER is not set
-CONFIG_BPF_SYSCALL=y
-# CONFIG_BPQETHER is not set
-CONFIG_BQL=y
-CONFIG_BRANCH_PROFILE_NONE=y
-# CONFIG_BRCMFMAC is not set
-# CONFIG_BRCMSMAC is not set
-# CONFIG_BRCMSTB_GISB_ARB is not set
-CONFIG_BRIDGE=y
-# CONFIG_BRIDGE_EBT_802_3 is not set
-# CONFIG_BRIDGE_EBT_AMONG is not set
-# CONFIG_BRIDGE_EBT_ARP is not set
-# CONFIG_BRIDGE_EBT_ARPREPLY is not set
-# CONFIG_BRIDGE_EBT_BROUTE is not set
-# CONFIG_BRIDGE_EBT_DNAT is not set
-# CONFIG_BRIDGE_EBT_IP is not set
-# CONFIG_BRIDGE_EBT_IP6 is not set
-# CONFIG_BRIDGE_EBT_LIMIT is not set
-# CONFIG_BRIDGE_EBT_LOG is not set
-# CONFIG_BRIDGE_EBT_MARK is not set
-# CONFIG_BRIDGE_EBT_MARK_T is not set
-# CONFIG_BRIDGE_EBT_NFLOG is not set
-# CONFIG_BRIDGE_EBT_PKTTYPE is not set
-# CONFIG_BRIDGE_EBT_REDIRECT is not set
-# CONFIG_BRIDGE_EBT_SNAT is not set
-# CONFIG_BRIDGE_EBT_STP is not set
-# CONFIG_BRIDGE_EBT_T_FILTER is not set
-# CONFIG_BRIDGE_EBT_T_NAT is not set
-# CONFIG_BRIDGE_EBT_VLAN is not set
-CONFIG_BRIDGE_IGMP_SNOOPING=y
-# CONFIG_BRIDGE_NETFILTER is not set
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-CONFIG_BRIDGE_VLAN_FILTERING=y
-# CONFIG_BROADCOM_PHY is not set
-CONFIG_BROKEN_ON_SMP=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_BT is not set
-# CONFIG_BTRFS_ASSERT is not set
-# CONFIG_BTRFS_DEBUG is not set
-# CONFIG_BTRFS_FS is not set
-# CONFIG_BTRFS_FS_POSIX_ACL is not set
-# CONFIG_BTRFS_FS_REF_VERIFY is not set
-# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
-# CONFIG_BT_ATH3K is not set
-# CONFIG_BT_BNEP is not set
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-# CONFIG_BT_BREDR is not set
-# CONFIG_BT_CMTP is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTUSB_AUTOSUSPEND is not set
-# CONFIG_BT_HCIBTUSB_RTL is not set
-# CONFIG_BT_HCIDTL1 is not set
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIUART_3WIRE is not set
-# CONFIG_BT_HCIUART_AG6XX is not set
-# CONFIG_BT_HCIUART_ATH3K is not set
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_H4=y
-# CONFIG_BT_HCIUART_LL is not set
-# CONFIG_BT_HCIUART_MRVL is not set
-# CONFIG_BT_HCIUART_QCA is not set
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_BT_HIDP is not set
-# CONFIG_BT_HS is not set
-# CONFIG_BT_LE is not set
-# CONFIG_BT_LEDS is not set
-# CONFIG_BT_MRVL is not set
-# CONFIG_BT_MTKUART is not set
-# CONFIG_BT_RFCOMM is not set
-CONFIG_BT_RFCOMM_TTY=y
-# CONFIG_BT_SELFTEST is not set
-CONFIG_BUG=y
-# CONFIG_BUG_ON_DATA_CORRUPTION is not set
-CONFIG_BUILDTIME_EXTABLE_SORT=y
-# CONFIG_BUILD_BIN2C is not set
-CONFIG_BUILD_SALT=""
-# CONFIG_C2PORT is not set
-CONFIG_CACHE_L2X0_PMU=y
-# CONFIG_CADENCE_WATCHDOG is not set
-# CONFIG_CAIF is not set
-# CONFIG_CAN is not set
-# CONFIG_CAN_BCM is not set
-# CONFIG_CAN_DEBUG_DEVICES is not set
-# CONFIG_CAN_DEV is not set
-# CONFIG_CAN_GS_USB is not set
-# CONFIG_CAN_GW is not set
-# CONFIG_CAN_HI311X is not set
-# CONFIG_CAN_IFI_CANFD is not set
-# CONFIG_CAN_MCBA_USB is not set
-# CONFIG_CAN_M_CAN is not set
-# CONFIG_CAN_PEAK_PCIEFD is not set
-# CONFIG_CAN_RAW is not set
-# CONFIG_CAN_RCAR is not set
-# CONFIG_CAN_RCAR_CANFD is not set
-# CONFIG_CAN_SLCAN is not set
-# CONFIG_CAN_SUN4I is not set
-# CONFIG_CAN_UCAN is not set
-# CONFIG_CAN_VCAN is not set
-# CONFIG_CAN_VXCAN is not set
-# CONFIG_CAPI_AVM is not set
-# CONFIG_CAPI_EICON is not set
-# CONFIG_CAPI_TRACE is not set
-CONFIG_CARDBUS=y
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_CARL9170 is not set
-# CONFIG_CASSINI is not set
-# CONFIG_CAVIUM_CPT is not set
-# CONFIG_CAVIUM_ERRATUM_22375 is not set
-# CONFIG_CAVIUM_ERRATUM_23144 is not set
-# CONFIG_CAVIUM_ERRATUM_23154 is not set
-# CONFIG_CAVIUM_ERRATUM_27456 is not set
-# CONFIG_CAVIUM_ERRATUM_30115 is not set
-# CONFIG_CAVIUM_OCTEON_SOC is not set
-# CONFIG_CAVIUM_PTP is not set
-# CONFIG_CB710_CORE is not set
-# CONFIG_CC10001_ADC is not set
-# CONFIG_CCS811 is not set
-CONFIG_CC_HAS_SANCOV_TRACE_PC=y
-CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
-CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_CEPH_FS is not set
-# CONFIG_CEPH_LIB is not set
-# CONFIG_CFG80211 is not set
-# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_CHARGER_ADP5061 is not set
-# CONFIG_CHARGER_BQ2415X is not set
-# CONFIG_CHARGER_BQ24190 is not set
-# CONFIG_CHARGER_BQ24257 is not set
-# CONFIG_CHARGER_BQ24735 is not set
-# CONFIG_CHARGER_BQ25890 is not set
-# CONFIG_CHARGER_DETECTOR_MAX14656 is not set
-# CONFIG_CHARGER_GPIO is not set
-# CONFIG_CHARGER_ISP1704 is not set
-# CONFIG_CHARGER_LP8727 is not set
-# CONFIG_CHARGER_LTC3651 is not set
-# CONFIG_CHARGER_MANAGER is not set
-# CONFIG_CHARGER_MAX8903 is not set
-# CONFIG_CHARGER_RT9455 is not set
-# CONFIG_CHARGER_SBS is not set
-# CONFIG_CHARGER_SMB347 is not set
-# CONFIG_CHARGER_TWL4030 is not set
-# CONFIG_CHASH_SELFTEST is not set
-# CONFIG_CHASH_STATS is not set
-# CONFIG_CHECKPOINT_RESTORE is not set
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_CHELSIO_T4 is not set
-# CONFIG_CHELSIO_T4VF is not set
-# CONFIG_CHROME_PLATFORMS is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_CIFS is not set
-# CONFIG_CIFS_ACL is not set
-CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
-# CONFIG_CIFS_DEBUG is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_FSCACHE is not set
-# CONFIG_CIFS_NFSD_EXPORT is not set
-CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_SMB2 is not set
-CONFIG_CIFS_STATS=y
-# CONFIG_CIFS_STATS2 is not set
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-# CONFIG_CIO_DAC is not set
-CONFIG_CLANG_VERSION=0
-# CONFIG_CLEANCACHE is not set
-# CONFIG_CLKSRC_VERSATILE is not set
-# CONFIG_CLK_HSDK is not set
-# CONFIG_CLK_QORIQ is not set
-# CONFIG_CLOCK_THERMAL is not set
-CONFIG_CLS_U32_MARK=y
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CM32181 is not set
-# CONFIG_CM3232 is not set
-# CONFIG_CM3323 is not set
-# CONFIG_CM3605 is not set
-# CONFIG_CM36651 is not set
-# CONFIG_CMA is not set
-CONFIG_CMDLINE=""
-# CONFIG_CMDLINE_BOOL is not set
-# CONFIG_CMDLINE_EXTEND is not set
-# CONFIG_CMDLINE_FORCE is not set
-# CONFIG_CMDLINE_FROM_BOOTLOADER is not set
-# CONFIG_CMDLINE_PARTITION is not set
-# CONFIG_CNIC is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_COMEDI is not set
-# CONFIG_COMMON_CLK_CDCE706 is not set
-# CONFIG_COMMON_CLK_CDCE925 is not set
-# CONFIG_COMMON_CLK_CS2000_CP is not set
-# CONFIG_COMMON_CLK_IPROC is not set
-# CONFIG_COMMON_CLK_MAX9485 is not set
-# CONFIG_COMMON_CLK_NXP is not set
-# CONFIG_COMMON_CLK_PIC32 is not set
-# CONFIG_COMMON_CLK_PWM is not set
-# CONFIG_COMMON_CLK_PXA is not set
-# CONFIG_COMMON_CLK_QCOM is not set
-# CONFIG_COMMON_CLK_SI514 is not set
-# CONFIG_COMMON_CLK_SI5351 is not set
-# CONFIG_COMMON_CLK_SI544 is not set
-# CONFIG_COMMON_CLK_SI570 is not set
-# CONFIG_COMMON_CLK_VC5 is not set
-# CONFIG_COMMON_CLK_VERSATILE is not set
-# CONFIG_COMMON_CLK_XGENE is not set
-# CONFIG_COMMON_CLK_XLNX_CLKWZRD is not set
-CONFIG_COMPACTION=y
-# CONFIG_COMPAL_LAPTOP is not set
-# CONFIG_COMPAT is not set
-# CONFIG_COMPAT_BRK is not set
-# CONFIG_COMPILE_TEST is not set
-# CONFIG_CONFIGFS_FS is not set
-# CONFIG_CONFIG_KVM_AMD_SEV is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
-CONFIG_CONSOLE_LOGLEVEL_QUIET=4
-CONFIG_CONSTRUCTORS=y
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_COPS is not set
-# CONFIG_CORDIC is not set
-# CONFIG_COREDUMP is not set
-# CONFIG_CORESIGHT is not set
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_CORTINA_PHY is not set
-# CONFIG_CPA_DEBUG is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-# CONFIG_CPU_IDLE is not set
-# CONFIG_CPU_IDLE_GOV_MENU is not set
-# CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set
-# CONFIG_CPU_ISOLATION is not set
-# CONFIG_CPU_NO_EFFICIENT_FFS is not set
-CONFIG_CPU_SW_DOMAIN_PAN=y
-# CONFIG_CRAMFS is not set
-CONFIG_CRAMFS_BLOCKDEV=y
-# CONFIG_CRAMFS_MTD is not set
-CONFIG_CRASHLOG=y
-# CONFIG_CRASH_DUMP is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_CRC32_BIT is not set
-CONFIG_CRC32_SARWATE=y
-# CONFIG_CRC32_SELFTEST is not set
-# CONFIG_CRC32_SLICEBY4 is not set
-# CONFIG_CRC32_SLICEBY8 is not set
-# CONFIG_CRC4 is not set
-# CONFIG_CRC64 is not set
-# CONFIG_CRC7 is not set
-# CONFIG_CRC8 is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC_ITU_T is not set
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CROSS_COMPILE=""
-# CONFIG_CROSS_MEMORY_ATTACH is not set
-CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_842 is not set
-# CONFIG_CRYPTO_AEAD is not set
-# CONFIG_CRYPTO_AEGIS128 is not set
-# CONFIG_CRYPTO_AEGIS128L is not set
-# CONFIG_CRYPTO_AEGIS128L_AESNI_SSE2 is not set
-# CONFIG_CRYPTO_AEGIS128_AESNI_SSE2 is not set
-# CONFIG_CRYPTO_AEGIS256 is not set
-# CONFIG_CRYPTO_AEGIS256_AESNI_SSE2 is not set
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_AES_586 is not set
-# CONFIG_CRYPTO_AES_ARM is not set
-# CONFIG_CRYPTO_AES_ARM_BS is not set
-# CONFIG_CRYPTO_AES_ARM_CE is not set
-# CONFIG_CRYPTO_AES_NI_INTEL is not set
-# CONFIG_CRYPTO_AES_TI is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CFB is not set
-# CONFIG_CRYPTO_CHACHA20 is not set
-# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
-# CONFIG_CRYPTO_CHACHA20_NEON is not set
-# CONFIG_CRYPTO_CMAC is not set
-# CONFIG_CRYPTO_CRC32 is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CRC32C_INTEL is not set
-# CONFIG_CRYPTO_CRC32_ARM_CE is not set
-# CONFIG_CRYPTO_CRCT10DIF is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_DEV_ATMEL_AES is not set
-# CONFIG_CRYPTO_DEV_ATMEL_AUTHENC is not set
-# CONFIG_CRYPTO_DEV_ATMEL_ECC is not set
-# CONFIG_CRYPTO_DEV_ATMEL_SHA is not set
-# CONFIG_CRYPTO_DEV_ATMEL_TDES is not set
-# CONFIG_CRYPTO_DEV_CAVIUM_ZIP is not set
-# CONFIG_CRYPTO_DEV_CCP is not set
-# CONFIG_CRYPTO_DEV_CCREE is not set
-# CONFIG_CRYPTO_DEV_FSL_CAAM is not set
-# CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC is not set
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_HISI_SEC is not set
-# CONFIG_CRYPTO_DEV_IMGTEC_HASH is not set
-# CONFIG_CRYPTO_DEV_MARVELL_CESA is not set
-# CONFIG_CRYPTO_DEV_MV_CESA is not set
-# CONFIG_CRYPTO_DEV_MXC_SCC is not set
-# CONFIG_CRYPTO_DEV_MXS_DCP is not set
-# CONFIG_CRYPTO_DEV_NITROX_CNN55XX is not set
-# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
-# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
-# CONFIG_CRYPTO_DEV_QAT_C62X is not set
-# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
-# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
-# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
-# CONFIG_CRYPTO_DEV_QCE is not set
-# CONFIG_CRYPTO_DEV_S5P is not set
-# CONFIG_CRYPTO_DEV_SAFEXCEL is not set
-# CONFIG_CRYPTO_DEV_SAHARA is not set
-# CONFIG_CRYPTO_DEV_SP_PSP is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-# CONFIG_CRYPTO_DEV_VIRTIO is not set
-# CONFIG_CRYPTO_DH is not set
-# CONFIG_CRYPTO_DRBG_CTR is not set
-# CONFIG_CRYPTO_DRBG_HASH is not set
-# CONFIG_CRYPTO_DRBG_MENU is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_ECDH is not set
-# CONFIG_CRYPTO_ECHAINIV is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_GHASH is not set
-# CONFIG_CRYPTO_GHASH_ARM_CE is not set
-# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
-# CONFIG_CRYPTO_HASH is not set
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_HW is not set
-# CONFIG_CRYPTO_JITTERENTROPY is not set
-# CONFIG_CRYPTO_KEYWRAP is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_LZ4 is not set
-# CONFIG_CRYPTO_LZ4HC is not set
-# CONFIG_CRYPTO_LZO is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
-CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
-# CONFIG_CRYPTO_MCRYPTD is not set
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_MORUS1280 is not set
-# CONFIG_CRYPTO_MORUS1280_AVX2 is not set
-# CONFIG_CRYPTO_MORUS1280_SSE2 is not set
-# CONFIG_CRYPTO_MORUS640 is not set
-# CONFIG_CRYPTO_MORUS640_SSE2 is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_PCOMP is not set
-# CONFIG_CRYPTO_PCOMP2 is not set
-CONFIG_CRYPTO_PCRYPT=y
-# CONFIG_CRYPTO_POLY1305 is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_RNG is not set
-# CONFIG_CRYPTO_RSA is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SALSA20_586 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SEQIV is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA1_ARM is not set
-# CONFIG_CRYPTO_SHA1_ARM_CE is not set
-# CONFIG_CRYPTO_SHA1_ARM_NEON is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA256_ARM is not set
-# CONFIG_CRYPTO_SHA2_ARM_CE is not set
-# CONFIG_CRYPTO_SHA3 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_SHA512_ARM is not set
-# CONFIG_CRYPTO_SIMD is not set
-# CONFIG_CRYPTO_SM3 is not set
-# CONFIG_CRYPTO_SM4 is not set
-# CONFIG_CRYPTO_SPECK is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_TWOFISH_586 is not set
-# CONFIG_CRYPTO_TWOFISH_COMMON is not set
-# CONFIG_CRYPTO_USER is not set
-# CONFIG_CRYPTO_USER_API_AEAD is not set
-# CONFIG_CRYPTO_USER_API_HASH is not set
-# CONFIG_CRYPTO_USER_API_RNG is not set
-# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
-# CONFIG_CRYPTO_VMAC is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_ZSTD is not set
-# CONFIG_CS5535_MFGPT is not set
-# CONFIG_CS89x0 is not set
-# CONFIG_CUSE is not set
-# CONFIG_CW1200 is not set
-# CONFIG_CXL_AFU_DRIVER_OPS is not set
-# CONFIG_CXL_BASE is not set
-# CONFIG_CXL_EEH is not set
-# CONFIG_CXL_KERNEL_API is not set
-# CONFIG_CXL_LIB is not set
-# CONFIG_CYPRESS_FIRMWARE is not set
-# CONFIG_DA280 is not set
-# CONFIG_DA311 is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_DAX is not set
-# CONFIG_DCB is not set
-# CONFIG_DDR is not set
-# CONFIG_DEBUG_ALIGN_RODATA is not set
-# CONFIG_DEBUG_ATOMIC_SLEEP is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_CREDENTIALS is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_EFI is not set
-# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-# CONFIG_DEBUG_ICEDCC is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_INFO_DWARF4 is not set
-CONFIG_DEBUG_INFO_REDUCED=y
-# CONFIG_DEBUG_INFO_SPLIT is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_KMEMLEAK is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_KOBJECT_RELEASE is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_LL is not set
-# CONFIG_DEBUG_LL_UART_8250 is not set
-# CONFIG_DEBUG_LL_UART_PL01X is not set
-# CONFIG_DEBUG_LOCKDEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_DEBUG_NX_TEST is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_DEBUG_PAGE_REF is not set
-# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
-# CONFIG_DEBUG_PER_CPU_MAPS is not set
-# CONFIG_DEBUG_PINCTRL is not set
-# CONFIG_DEBUG_PI_LIST is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RODATA_TEST is not set
-# CONFIG_DEBUG_RSEQ is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_DEBUG_RWSEMS is not set
-# CONFIG_DEBUG_SECTION_MISMATCH is not set
-# CONFIG_DEBUG_SEMIHOSTING is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
-# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
-# CONFIG_DEBUG_TIMEKEEPING is not set
-# CONFIG_DEBUG_UART_8250_PALMCHIP is not set
-# CONFIG_DEBUG_UART_BCM63XX is not set
-# CONFIG_DEBUG_VIRTUAL is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_VM_PGFLAGS is not set
-# CONFIG_DEBUG_VM_RB is not set
-# CONFIG_DEBUG_VM_VMACACHE is not set
-# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
-# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
-# CONFIG_DEBUG_WX is not set
-# CONFIG_DEBUG_ZBOOT is not set
-# CONFIG_DECNET is not set
-CONFIG_DEFAULT_CUBIC=y
-CONFIG_DEFAULT_DEADLINE=y
-CONFIG_DEFAULT_HOSTNAME="(none)"
-CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
-CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
-# CONFIG_DEFAULT_NOOP is not set
-# CONFIG_DEFAULT_RENO is not set
-CONFIG_DEFAULT_SECURITY=""
-CONFIG_DEFAULT_SECURITY_DAC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set
-# CONFIG_DELL_LAPTOP is not set
-# CONFIG_DELL_RBTN is not set
-# CONFIG_DELL_SMBIOS is not set
-# CONFIG_DELL_SMO8800 is not set
-# CONFIG_DEPRECATED_PARAM_STRUCT is not set
-# CONFIG_DETECT_HUNG_TASK is not set
-# CONFIG_DEVKMEM is not set
-# CONFIG_DEVMEM is not set
-CONFIG_DEVPORT=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-# CONFIG_DEVTMPFS is not set
-# CONFIG_DEVTMPFS_MOUNT is not set
-# CONFIG_DEV_DAX is not set
-# CONFIG_DGAP is not set
-# CONFIG_DGNC is not set
-# CONFIG_DHT11 is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_DISPLAY_CONNECTOR_ANALOG_TV is not set
-# CONFIG_DISPLAY_CONNECTOR_DVI is not set
-# CONFIG_DISPLAY_CONNECTOR_HDMI is not set
-# CONFIG_DISPLAY_ENCODER_TFP410 is not set
-# CONFIG_DISPLAY_ENCODER_TPD12S015 is not set
-# CONFIG_DISPLAY_PANEL_DPI is not set
-# CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02 is not set
-# CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1 is not set
-# CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1 is not set
-# CONFIG_DL2K is not set
-# CONFIG_DLM is not set
-# CONFIG_DM9000 is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_DMADEVICES_DEBUG is not set
-# CONFIG_DMARD06 is not set
-# CONFIG_DMARD09 is not set
-# CONFIG_DMARD10 is not set
-# CONFIG_DMASCC is not set
-# CONFIG_DMATEST is not set
-# CONFIG_DMA_API_DEBUG is not set
-# CONFIG_DMA_ENGINE is not set
-# CONFIG_DMA_FENCE_TRACE is not set
-# CONFIG_DMA_JZ4780 is not set
-# CONFIG_DMA_NOOP_OPS is not set
-# CONFIG_DMA_SHARED_BUFFER is not set
-# CONFIG_DMA_VIRT_OPS is not set
-# CONFIG_DM_CACHE is not set
-# CONFIG_DM_DEBUG is not set
-# CONFIG_DM_DELAY is not set
-# CONFIG_DM_ERA is not set
-# CONFIG_DM_FLAKEY is not set
-# CONFIG_DM_INTEGRITY is not set
-# CONFIG_DM_LOG_USERSPACE is not set
-# CONFIG_DM_LOG_WRITES is not set
-# CONFIG_DM_MQ_DEFAULT is not set
-# CONFIG_DM_MULTIPATH is not set
-# CONFIG_DM_RAID is not set
-# CONFIG_DM_SWITCH is not set
-# CONFIG_DM_THIN_PROVISIONING is not set
-# CONFIG_DM_UEVENT is not set
-# CONFIG_DM_UNSTRIPED is not set
-# CONFIG_DM_VERITY is not set
-# CONFIG_DM_WRITECACHE is not set
-# CONFIG_DM_ZERO is not set
-# CONFIG_DNET is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_DNS_RESOLVER is not set
-CONFIG_DOUBLEFAULT=y
-# CONFIG_DP83822_PHY is not set
-# CONFIG_DP83848_PHY is not set
-# CONFIG_DP83867_PHY is not set
-# CONFIG_DP83TC811_PHY is not set
-# CONFIG_DPOT_DAC is not set
-CONFIG_DQL=y
-# CONFIG_DRAGONRISE_FF is not set
-# CONFIG_DRM is not set
-# CONFIG_DRM_AMDGPU is not set
-# CONFIG_DRM_AMDGPU_CIK is not set
-# CONFIG_DRM_AMDGPU_GART_DEBUGFS is not set
-# CONFIG_DRM_AMDGPU_SI is not set
-# CONFIG_DRM_AMDGPU_USERPTR is not set
-# CONFIG_DRM_AMD_ACP is not set
-# CONFIG_DRM_ANALOGIX_ANX78XX is not set
-# CONFIG_DRM_ARCPGU is not set
-# CONFIG_DRM_ARMADA is not set
-# CONFIG_DRM_AST is not set
-# CONFIG_DRM_BOCHS is not set
-# CONFIG_DRM_CDNS_DSI is not set
-# CONFIG_DRM_CIRRUS_QEMU is not set
-# CONFIG_DRM_DEBUG_MM is not set
-# CONFIG_DRM_DEBUG_SELFTEST is not set
-# CONFIG_DRM_DP_AUX_CHARDEV is not set
-# CONFIG_DRM_DP_CEC is not set
-# CONFIG_DRM_DUMB_VGA_DAC is not set
-# CONFIG_DRM_DW_HDMI_CEC is not set
-# CONFIG_DRM_ETNAVIV is not set
-# CONFIG_DRM_EXYNOS is not set
-# CONFIG_DRM_FBDEV_EMULATION is not set
-# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set
-# CONFIG_DRM_FSL_DCU is not set
-# CONFIG_DRM_GMA500 is not set
-# CONFIG_DRM_HDLCD is not set
-# CONFIG_DRM_HISI_HIBMC is not set
-# CONFIG_DRM_HISI_KIRIN is not set
-# CONFIG_DRM_I2C_ADV7511 is not set
-# CONFIG_DRM_I2C_CH7006 is not set
-# CONFIG_DRM_I2C_NXP_TDA9950 is not set
-# CONFIG_DRM_I2C_NXP_TDA998X is not set
-# CONFIG_DRM_I2C_SIL164 is not set
-# CONFIG_DRM_I915 is not set
-# CONFIG_DRM_LEGACY is not set
-# CONFIG_DRM_LIB_RANDOM is not set
-# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
-# CONFIG_DRM_LVDS_ENCODER is not set
-# CONFIG_DRM_MALI_DISPLAY is not set
-# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set
-# CONFIG_DRM_MGAG200 is not set
-# CONFIG_DRM_MXSFB is not set
-# CONFIG_DRM_NOUVEAU is not set
-# CONFIG_DRM_NXP_PTN3460 is not set
-# CONFIG_DRM_OMAP is not set
-# CONFIG_DRM_PANEL_ARM_VERSATILE is not set
-# CONFIG_DRM_PANEL_ILITEK_IL9322 is not set
-# CONFIG_DRM_PANEL_ILITEK_ILI9881C is not set
-# CONFIG_DRM_PANEL_INNOLUX_P079ZCA is not set
-# CONFIG_DRM_PANEL_JDI_LT070ME05000 is not set
-# CONFIG_DRM_PANEL_LG_LG4573 is not set
-# CONFIG_DRM_PANEL_LVDS is not set
-# CONFIG_DRM_PANEL_ORISETECH_OTM8009A is not set
-# CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00 is not set
-# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set
-# CONFIG_DRM_PANEL_RAYDIUM_RM68200 is not set
-# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set
-# CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2 is not set
-# CONFIG_DRM_PANEL_SAMSUNG_S6E63J0X03 is not set
-# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set
-# CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set
-# CONFIG_DRM_PANEL_SHARP_LQ101R1SX01 is not set
-# CONFIG_DRM_PANEL_SHARP_LS043T1LE01 is not set
-# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set
-# CONFIG_DRM_PARADE_PS8622 is not set
-# CONFIG_DRM_PL111 is not set
-# CONFIG_DRM_QXL is not set
-# CONFIG_DRM_RADEON is not set
-# CONFIG_DRM_RADEON_USERPTR is not set
-# CONFIG_DRM_RCAR_DW_HDMI is not set
-# CONFIG_DRM_RCAR_LVDS is not set
-# CONFIG_DRM_SII902X is not set
-# CONFIG_DRM_SII9234 is not set
-# CONFIG_DRM_SIL_SII8620 is not set
-# CONFIG_DRM_STI is not set
-# CONFIG_DRM_STM is not set
-# CONFIG_DRM_SUN4I is not set
-# CONFIG_DRM_THINE_THC63LVD1024 is not set
-# CONFIG_DRM_TILCDC is not set
-# CONFIG_DRM_TINYDRM is not set
-# CONFIG_DRM_TI_TFP410 is not set
-# CONFIG_DRM_TOSHIBA_TC358767 is not set
-# CONFIG_DRM_UDL is not set
-# CONFIG_DRM_VBOXVIDEO is not set
-# CONFIG_DRM_VGEM is not set
-# CONFIG_DRM_VIRTIO_GPU is not set
-# CONFIG_DRM_VKMS is not set
-# CONFIG_DRM_VMWGFX is not set
-# CONFIG_DRM_XEN is not set
-# CONFIG_DS1682 is not set
-# CONFIG_DS1803 is not set
-# CONFIG_DS4424 is not set
-# CONFIG_DST_CACHE is not set
-# CONFIG_DTLK is not set
-# CONFIG_DUMMY is not set
-CONFIG_DUMMY_CONSOLE_COLUMNS=80
-CONFIG_DUMMY_CONSOLE_ROWS=25
-# CONFIG_DUMMY_IRQ is not set
-# CONFIG_DVB_AU8522_V4L is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-# CONFIG_DVB_TUNER_DIB0090 is not set
-# CONFIG_DWC_XLGMAC is not set
-# CONFIG_DWMAC_IPQ806X is not set
-# CONFIG_DWMAC_LPC18XX is not set
-# CONFIG_DWMAC_MESON is not set
-# CONFIG_DWMAC_ROCKCHIP is not set
-# CONFIG_DWMAC_SOCFPGA is not set
-# CONFIG_DWMAC_STI is not set
-# CONFIG_DW_AXI_DMAC is not set
-# CONFIG_DW_DMAC is not set
-# CONFIG_DW_DMAC_PCI is not set
-# CONFIG_DW_WATCHDOG is not set
-# CONFIG_DYNAMIC_DEBUG is not set
-# CONFIG_E100 is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_E1000E_HWTS is not set
-# CONFIG_EARLY_PRINTK_8250 is not set
-# CONFIG_EARLY_PRINTK_USB_XDBC is not set
-# CONFIG_EBC_C384_WDT is not set
-# CONFIG_ECHO is not set
-# CONFIG_ECRYPT_FS is not set
-# CONFIG_EDAC is not set
-# CONFIG_EEEPC_LAPTOP is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_EEPROM_93XX46 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_DIGSY_MTC_CFG is not set
-# CONFIG_EEPROM_IDT_89HPESX is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_MAX6875 is not set
-# CONFIG_EFI is not set
-CONFIG_EFI_PARTITION=y
-# CONFIG_EFS_FS is not set
-CONFIG_ELFCORE=y
-# CONFIG_ELF_CORE is not set
-# CONFIG_EMAC_ROCKCHIP is not set
-CONFIG_EMBEDDED=y
-# CONFIG_EM_TIMER_STI is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-# CONFIG_ENA_ETHERNET is not set
-# CONFIG_ENC28J60 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ENCRYPTED_KEYS is not set
-# CONFIG_ENCX24J600 is not set
-# CONFIG_ENIC is not set
-# CONFIG_ENVELOPE_DETECTOR is not set
-# CONFIG_EPAPR_PARAVIRT is not set
-# CONFIG_EPIC100 is not set
-CONFIG_EPOLL=y
-# CONFIG_EQUALIZER is not set
-# CONFIG_EROFS_FS is not set
-# CONFIG_ET131X is not set
-CONFIG_ETHERNET=y
-# CONFIG_ETHOC is not set
-CONFIG_EVENTFD=y
-CONFIG_EXPERT=y
-CONFIG_EXPORTFS=y
-# CONFIG_EXPORTFS_BLOCK_OPS is not set
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4_DEBUG is not set
-# CONFIG_EXT4_ENCRYPTION is not set
-# CONFIG_EXT4_FS is not set
-# CONFIG_EXT4_FS_POSIX_ACL is not set
-# CONFIG_EXT4_FS_SECURITY is not set
-CONFIG_EXT4_USE_FOR_EXT2=y
-# CONFIG_EXTCON is not set
-# CONFIG_EXTCON_ADC_JACK is not set
-# CONFIG_EXTCON_ARIZONA is not set
-# CONFIG_EXTCON_AXP288 is not set
-# CONFIG_EXTCON_GPIO is not set
-# CONFIG_EXTCON_INTEL_INT3496 is not set
-# CONFIG_EXTCON_MAX3355 is not set
-# CONFIG_EXTCON_QCOM_SPMI_MISC is not set
-# CONFIG_EXTCON_RT8973A is not set
-# CONFIG_EXTCON_SM5502 is not set
-# CONFIG_EXTCON_USB_GPIO is not set
-CONFIG_EXTRA_FIRMWARE=""
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_EXYNOS_ADC is not set
-# CONFIG_EXYNOS_VIDEO is not set
-# CONFIG_EZCHIP_NPS_MANAGEMENT_ENET is not set
-# CONFIG_EZX_PCAP is not set
-# CONFIG_F2FS_CHECK_FS is not set
-# CONFIG_F2FS_FAULT_INJECTION is not set
-# CONFIG_F2FS_FS is not set
-# CONFIG_F2FS_FS_ENCRYPTION is not set
-# CONFIG_F2FS_FS_POSIX_ACL is not set
-# CONFIG_F2FS_FS_SECURITY is not set
-CONFIG_F2FS_FS_XATTR=y
-# CONFIG_F2FS_IO_TRACE is not set
-CONFIG_F2FS_STAT_FS=y
-# CONFIG_FAILOVER is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_FANOTIFY is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_FAT_DEFAULT_UTF8 is not set
-# CONFIG_FAT_FS is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_FB is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_ARC is not set
-# CONFIG_FB_ARK is not set
-# CONFIG_FB_ARMCLCD is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_AUO_K190X is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_BIG_ENDIAN is not set
-# CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_BOTH_ENDIAN is not set
-# CONFIG_FB_BROADSHEET is not set
-# CONFIG_FB_CARMINE is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_DA8XX is not set
-# CONFIG_FB_DDC is not set
-# CONFIG_FB_FLEX is not set
-# CONFIG_FB_FOREIGN_ENDIAN is not set
-# CONFIG_FB_GEODE is not set
-# CONFIG_FB_GOLDFISH is not set
-# CONFIG_FB_HGA is not set
-# CONFIG_FB_I740 is not set
-# CONFIG_FB_IBM_GXT4500 is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_IMX is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_LE80578 is not set
-# CONFIG_FB_LITTLE_ENDIAN is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_MB862XX is not set
-# CONFIG_FB_METRONOME is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_MXS is not set
-# CONFIG_FB_N411 is not set
-# CONFIG_FB_NEOMAGIC is not set
-CONFIG_FB_NOTIFY=y
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_OF is not set
-# CONFIG_FB_OMAP2 is not set
-# CONFIG_FB_OPENCORES is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_PM3 is not set
-# CONFIG_FB_PS3 is not set
-# CONFIG_FB_PXA is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIMPLE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_SM712 is not set
-# CONFIG_FB_SM750 is not set
-# CONFIG_FB_SMSCUFX is not set
-# CONFIG_FB_SSD1307 is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_FOPS is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_TFT is not set
-# CONFIG_FB_TFT_AGM1264K_FL is not set
-# CONFIG_FB_TFT_BD663474 is not set
-# CONFIG_FB_TFT_FBTFT_DEVICE is not set
-# CONFIG_FB_TFT_HX8340BN is not set
-# CONFIG_FB_TFT_HX8347D is not set
-# CONFIG_FB_TFT_HX8353D is not set
-# CONFIG_FB_TFT_HX8357D is not set
-# CONFIG_FB_TFT_ILI9163 is not set
-# CONFIG_FB_TFT_ILI9320 is not set
-# CONFIG_FB_TFT_ILI9325 is not set
-# CONFIG_FB_TFT_ILI9340 is not set
-# CONFIG_FB_TFT_ILI9341 is not set
-# CONFIG_FB_TFT_ILI9481 is not set
-# CONFIG_FB_TFT_ILI9486 is not set
-# CONFIG_FB_TFT_PCD8544 is not set
-# CONFIG_FB_TFT_RA8875 is not set
-# CONFIG_FB_TFT_S6D02A1 is not set
-# CONFIG_FB_TFT_S6D1121 is not set
-# CONFIG_FB_TFT_SH1106 is not set
-# CONFIG_FB_TFT_SSD1289 is not set
-# CONFIG_FB_TFT_SSD1305 is not set
-# CONFIG_FB_TFT_SSD1306 is not set
-# CONFIG_FB_TFT_SSD1325 is not set
-# CONFIG_FB_TFT_SSD1331 is not set
-# CONFIG_FB_TFT_SSD1351 is not set
-# CONFIG_FB_TFT_ST7735R is not set
-# CONFIG_FB_TFT_ST7789V is not set
-# CONFIG_FB_TFT_TINYLCD is not set
-# CONFIG_FB_TFT_TLS8204 is not set
-# CONFIG_FB_TFT_UC1611 is not set
-# CONFIG_FB_TFT_UC1701 is not set
-# CONFIG_FB_TFT_UPD161704 is not set
-# CONFIG_FB_TFT_WATTEROTT is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_TMIO is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_UDL is not set
-# CONFIG_FB_UVESA is not set
-# CONFIG_FB_VGA16 is not set
-# CONFIG_FB_VIA is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_XGI is not set
-# CONFIG_FCOE is not set
-# CONFIG_FCOE_FNIC is not set
-# CONFIG_FDDI is not set
-# CONFIG_FEALNX is not set
-# CONFIG_FENCE_TRACE is not set
-# CONFIG_FHANDLE is not set
-CONFIG_FIB_RULES=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_FIND_BIT_BENCHMARK is not set
-# CONFIG_FIREWIRE is not set
-# CONFIG_FIREWIRE_NOSY is not set
-# CONFIG_FIREWIRE_SERIAL is not set
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FIRMWARE_MEMMAP is not set
-# CONFIG_FIXED_PHY is not set
-CONFIG_FLATMEM=y
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_FM10K is not set
-# CONFIG_FMC is not set
-# CONFIG_FORCEDETH is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_FORTIFY_SOURCE=y
-# CONFIG_FPGA is not set
-# CONFIG_FRAMEBUFFER_CONSOLE is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
-# CONFIG_FRAME_POINTER is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_FREEZER is not set
-# CONFIG_FRONTSWAP is not set
-# CONFIG_FSCACHE is not set
-# CONFIG_FSI is not set
-# CONFIG_FSL_EDMA is not set
-# CONFIG_FSL_ERRATUM_A008585 is not set
-# CONFIG_FSL_MC_BUS is not set
-# CONFIG_FSL_PQ_MDIO is not set
-# CONFIG_FSL_XGMAC_MDIO is not set
-CONFIG_FSNOTIFY=y
-# CONFIG_FS_DAX is not set
-# CONFIG_FS_ENCRYPTION is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_FTGMAC100 is not set
-# CONFIG_FTL is not set
-# CONFIG_FTMAC100 is not set
-# CONFIG_FTRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_FTWDT010_WATCHDOG is not set
-# CONFIG_FUJITSU_ES is not set
-# CONFIG_FUJITSU_LAPTOP is not set
-# CONFIG_FUJITSU_TABLET is not set
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_FUSE_FS is not set
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-# CONFIG_FUSION_SPI is not set
-CONFIG_FUTEX=y
-CONFIG_FUTEX_PI=y
-# CONFIG_FW_CFG_SYSFS is not set
-CONFIG_FW_LOADER=y
-CONFIG_FW_LOADER_USER_HELPER=y
-CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
-CONFIG_GACT_PROB=y
-# CONFIG_GADGET_UAC1 is not set
-# CONFIG_GAMEPORT is not set
-# CONFIG_GATEWORKS_GW16083 is not set
-# CONFIG_GCC_PLUGINS is not set
-# CONFIG_GCC_PLUGIN_CYC_COMPLEXITY is not set
-# CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set
-# CONFIG_GCOV is not set
-# CONFIG_GCOV_KERNEL is not set
-# CONFIG_GDB_SCRIPTS is not set
-# CONFIG_GEMINI_ETHERNET is not set
-# CONFIG_GENERIC_ADC_BATTERY is not set
-# CONFIG_GENERIC_ADC_THERMAL is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-# CONFIG_GENERIC_CPU_DEVICES is not set
-CONFIG_GENERIC_HWEIGHT=y
-# CONFIG_GENERIC_IRQ_DEBUGFS is not set
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_NET_UTILS=y
-# CONFIG_GENERIC_PHY is not set
-# CONFIG_GENEVE is not set
-# CONFIG_GENWQE is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_GIGASET_CAPI is not set
-# CONFIG_GIGASET_DEBUG is not set
-# CONFIG_GIGASET_DUMMYLL is not set
-# CONFIG_GLOB_SELFTEST is not set
-# CONFIG_GNSS is not set
-# CONFIG_GOLDFISH is not set
-# CONFIG_GOOGLE_FIRMWARE is not set
-# CONFIG_GP2AP020A00F is not set
-# CONFIG_GPD_POCKET_FAN is not set
-# CONFIG_GPIOLIB is not set
-CONFIG_GPIOLIB_FASTPATH_LIMIT=512
-# CONFIG_GPIO_104_DIO_48E is not set
-# CONFIG_GPIO_104_IDIO_16 is not set
-# CONFIG_GPIO_104_IDI_48 is not set
-# CONFIG_GPIO_74X164 is not set
-# CONFIG_GPIO_74XX_MMIO is not set
-# CONFIG_GPIO_ADNP is not set
-# CONFIG_GPIO_ADP5588 is not set
-# CONFIG_GPIO_ALTERA is not set
-# CONFIG_GPIO_AMD8111 is not set
-# CONFIG_GPIO_AMDPT is not set
-# CONFIG_GPIO_BCM_KONA is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_CS5535 is not set
-# CONFIG_GPIO_DWAPB is not set
-# CONFIG_GPIO_EM is not set
-# CONFIG_GPIO_EXAR is not set
-# CONFIG_GPIO_F7188X is not set
-# CONFIG_GPIO_FTGPIO010 is not set
-# CONFIG_GPIO_GENERIC_PLATFORM is not set
-# CONFIG_GPIO_GPIO_MM is not set
-# CONFIG_GPIO_GRGPIO is not set
-# CONFIG_GPIO_HLWD is not set
-# CONFIG_GPIO_ICH is not set
-# CONFIG_GPIO_IT87 is not set
-# CONFIG_GPIO_LYNXPOINT is not set
-# CONFIG_GPIO_MAX3191X is not set
-# CONFIG_GPIO_MAX7300 is not set
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_MB86S7X is not set
-# CONFIG_GPIO_MC33880 is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_ML_IOH is not set
-# CONFIG_GPIO_MOCKUP is not set
-# CONFIG_GPIO_MPC8XXX is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_PCH is not set
-# CONFIG_GPIO_PCIE_IDIO_24 is not set
-# CONFIG_GPIO_PCI_IDIO_16 is not set
-# CONFIG_GPIO_PISOSR is not set
-# CONFIG_GPIO_PL061 is not set
-# CONFIG_GPIO_RCAR is not set
-# CONFIG_GPIO_RDC321X is not set
-# CONFIG_GPIO_SCH is not set
-# CONFIG_GPIO_SCH311X is not set
-# CONFIG_GPIO_SX150X is not set
-# CONFIG_GPIO_SYSCON is not set
-CONFIG_GPIO_SYSFS=y
-# CONFIG_GPIO_TPIC2810 is not set
-# CONFIG_GPIO_TS4900 is not set
-# CONFIG_GPIO_TS5500 is not set
-# CONFIG_GPIO_VX855 is not set
-# CONFIG_GPIO_WATCHDOG is not set
-# CONFIG_GPIO_WINBOND is not set
-# CONFIG_GPIO_WS16C48 is not set
-# CONFIG_GPIO_XGENE is not set
-# CONFIG_GPIO_XILINX is not set
-# CONFIG_GPIO_XRA1403 is not set
-# CONFIG_GPIO_ZEVIO is not set
-# CONFIG_GPIO_ZX is not set
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_GREYBUS is not set
-# CONFIG_GS_FPGABOOT is not set
-# CONFIG_GTP is not set
-# CONFIG_GUP_BENCHMARK is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_HAPPYMEAL is not set
-CONFIG_HARDENED_USERCOPY=y
-# CONFIG_HARDENED_USERCOPY_FALLBACK is not set
-# CONFIG_HARDENED_USERCOPY_PAGESPAN is not set
-CONFIG_HARDEN_EL2_VECTORS=y
-# CONFIG_HARDLOCKUP_DETECTOR is not set
-# CONFIG_HAVE_AOUT is not set
-CONFIG_HAVE_ARCH_HARDENED_USERCOPY=y
-# CONFIG_HAVE_ARCH_HASH is not set
-CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
-# CONFIG_HAVE_ARCH_VMAP_STACK is not set
-CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
-# CONFIG_HAVE_ARM_ARCH_TIMER is not set
-CONFIG_HAVE_EXIT_THREAD=y
-CONFIG_HAVE_GCC_PLUGINS=y
-CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_CAT=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZ4=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_KERNEL_XZ=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_NMI=y
-CONFIG_HAVE_STACKPROTECTOR=y
-# CONFIG_HCALL_STATS is not set
-# CONFIG_HDC100X is not set
-# CONFIG_HDLC is not set
-# CONFIG_HDLC_CISCO is not set
-# CONFIG_HDLC_FR is not set
-# CONFIG_HDLC_PPP is not set
-# CONFIG_HDLC_RAW is not set
-# CONFIG_HDLC_RAW_ETH is not set
-# CONFIG_HDMI_LPE_AUDIO is not set
-# CONFIG_HDQ_MASTER_OMAP is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_HERMES is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_HFSPLUS_FS_POSIX_ACL is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFS_FS_POSIX_ACL is not set
-# CONFIG_HI8435 is not set
-# CONFIG_HIBERNATION is not set
-# CONFIG_HID is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_ACCUTOUCH is not set
-# CONFIG_HID_ACRUX is not set
-# CONFIG_HID_ACRUX_FF is not set
-# CONFIG_HID_ALPS is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_APPLEIR is not set
-# CONFIG_HID_ASUS is not set
-# CONFIG_HID_AUREAL is not set
-# CONFIG_HID_BATTERY_STRENGTH is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_BETOP_FF is not set
-# CONFIG_HID_BIGBEN_FF is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CMEDIA is not set
-# CONFIG_HID_CORSAIR is not set
-# CONFIG_HID_COUGAR is not set
-# CONFIG_HID_CP2112 is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_ELAN is not set
-# CONFIG_HID_ELECOM is not set
-# CONFIG_HID_ELO is not set
-# CONFIG_HID_EMS_FF is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_GEMBIRD is not set
-# CONFIG_HID_GENERIC is not set
-# CONFIG_HID_GFRM is not set
-# CONFIG_HID_GOOGLE_HAMMER is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_GT683R is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_HOLTEK is not set
-# CONFIG_HID_ICADE is not set
-# CONFIG_HID_ITE is not set
-# CONFIG_HID_JABRA is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_KEYTOUCH is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_LCPOWER is not set
-# CONFIG_HID_LED is not set
-# CONFIG_HID_LENOVO is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_LOGITECH_DJ is not set
-# CONFIG_HID_LOGITECH_HIDPP is not set
-# CONFIG_HID_MAGICMOUSE is not set
-# CONFIG_HID_MAYFLASH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_MULTITOUCH is not set
-# CONFIG_HID_NTI is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_ORTEK is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PENMOUNT is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_PICOLCD is not set
-# CONFIG_HID_PID is not set
-# CONFIG_HID_PLANTRONICS is not set
-# CONFIG_HID_PRIMAX is not set
-# CONFIG_HID_PRODIKEYS is not set
-# CONFIG_HID_REDRAGON is not set
-# CONFIG_HID_RETRODE is not set
-# CONFIG_HID_RMI is not set
-# CONFIG_HID_ROCCAT is not set
-# CONFIG_HID_SAITEK is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SENSOR_HUB is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SPEEDLINK is not set
-# CONFIG_HID_STEAM is not set
-# CONFIG_HID_STEELSERIES is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_THINGM is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_TIVO is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_UCLOGIC is not set
-# CONFIG_HID_UDRAW_PS3 is not set
-# CONFIG_HID_WACOM is not set
-# CONFIG_HID_WALTOP is not set
-# CONFIG_HID_WIIMOTE is not set
-# CONFIG_HID_XINMO is not set
-# CONFIG_HID_ZEROPLUS is not set
-# CONFIG_HID_ZYDACRON is not set
-# CONFIG_HIGHMEM is not set
-CONFIG_HIGH_RES_TIMERS=y
-# CONFIG_HINIC is not set
-# CONFIG_HIP04_ETH is not set
-# CONFIG_HIPPI is not set
-# CONFIG_HISILICON_ERRATUM_161010101 is not set
-# CONFIG_HISILICON_ERRATUM_161600802 is not set
-# CONFIG_HISI_FEMAC is not set
-# CONFIG_HIX5HD2_GMAC is not set
-# CONFIG_HMC6352 is not set
-# CONFIG_HNS is not set
-# CONFIG_HNS3 is not set
-# CONFIG_HNS_DSAF is not set
-# CONFIG_HNS_ENET is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_HOSTAP_CS is not set
-# CONFIG_HOSTAP_PCI is not set
-# CONFIG_HOSTAP_PLX is not set
-# CONFIG_HOTPLUG_CPU is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HP03 is not set
-# CONFIG_HP100 is not set
-# CONFIG_HP206C is not set
-CONFIG_HPET_MMAP_DEFAULT=y
-# CONFIG_HPFS_FS is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_HP_WIRELESS is not set
-# CONFIG_HSI is not set
-# CONFIG_HSR is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_I2CPLD is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HTS221 is not set
-# CONFIG_HTU21 is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HVC_DCC is not set
-# CONFIG_HVC_UDBG is not set
-# CONFIG_HWLAT_TRACER is not set
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_HWMON_VID is not set
-# CONFIG_HWSPINLOCK is not set
-# CONFIG_HWSPINLOCK_OMAP is not set
-CONFIG_HW_PERF_EVENTS=y
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HW_RANDOM_AMD is not set
-# CONFIG_HW_RANDOM_ATMEL is not set
-# CONFIG_HW_RANDOM_CAVIUM is not set
-# CONFIG_HW_RANDOM_EXYNOS is not set
-# CONFIG_HW_RANDOM_GEODE is not set
-# CONFIG_HW_RANDOM_INTEL is not set
-# CONFIG_HW_RANDOM_IPROC_RNG200 is not set
-# CONFIG_HW_RANDOM_OMAP is not set
-# CONFIG_HW_RANDOM_OMAP3_ROM is not set
-# CONFIG_HW_RANDOM_PPC4XX is not set
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
-CONFIG_HW_RANDOM_TPM=y
-# CONFIG_HW_RANDOM_VIA is not set
-# CONFIG_HW_RANDOM_VIRTIO is not set
-# CONFIG_HX711 is not set
-# CONFIG_HYPERV is not set
-# CONFIG_HYPERV_TSCPAGE is not set
-# CONFIG_HYSDN is not set
-# CONFIG_HZ is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_1000 is not set
-# CONFIG_HZ_1024 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_200 is not set
-# CONFIG_HZ_24 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_500 is not set
-# CONFIG_HZ_PERIODIC is not set
-# CONFIG_I2C is not set
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCA is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
-# CONFIG_I2C_AU1550 is not set
-# CONFIG_I2C_BCM2835 is not set
-# CONFIG_I2C_BCM_IPROC is not set
-# CONFIG_I2C_CADENCE is not set
-# CONFIG_I2C_CBUS_GPIO is not set
-# CONFIG_I2C_CHARDEV is not set
-# CONFIG_I2C_COMPAT is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEMUX_PINCTRL is not set
-# CONFIG_I2C_DESIGNWARE_PCI is not set
-# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
-# CONFIG_I2C_DIOLAN_U2C is not set
-# CONFIG_I2C_EG20T is not set
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_EMEV2 is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set
-# CONFIG_I2C_HELPER_AUTO is not set
-# CONFIG_I2C_HID is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_IBM_IIC is not set
-# CONFIG_I2C_IMG is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_ISMT is not set
-# CONFIG_I2C_MLXCPLD is not set
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_MUX is not set
-# CONFIG_I2C_MUX_GPIO is not set
-# CONFIG_I2C_MUX_GPMUX is not set
-# CONFIG_I2C_MUX_LTC4306 is not set
-# CONFIG_I2C_MUX_MLXCPLD is not set
-# CONFIG_I2C_MUX_PCA9541 is not set
-# CONFIG_I2C_MUX_PCA954x is not set
-# CONFIG_I2C_MUX_PINCTRL is not set
-# CONFIG_I2C_MUX_REG is not set
-# CONFIG_I2C_MV64XXX is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_NOMADIK is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_OCTEON is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_PXA_PCI is not set
-# CONFIG_I2C_RCAR is not set
-# CONFIG_I2C_RK3X is not set
-# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
-# CONFIG_I2C_S3C2410 is not set
-# CONFIG_I2C_SCMI is not set
-# CONFIG_I2C_SH_MOBILE is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_SLAVE is not set
-# CONFIG_I2C_SMBUS is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_THUNDERX is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_VERSATILE is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_XILINX is not set
-# CONFIG_I40E is not set
-# CONFIG_I40EVF is not set
-# CONFIG_I6300ESB_WDT is not set
-# CONFIG_I82092 is not set
-# CONFIG_I82365 is not set
-# CONFIG_IAQCORE is not set
-# CONFIG_IBM_ASM is not set
-# CONFIG_IBM_EMAC_DEBUG is not set
-# CONFIG_IBM_EMAC_EMAC4 is not set
-# CONFIG_IBM_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_IBM_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_EMAC_RGMII is not set
-# CONFIG_IBM_EMAC_TAH is not set
-# CONFIG_IBM_EMAC_ZMII is not set
-# CONFIG_ICE is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_IDE is not set
-# CONFIG_IDEAPAD_LAPTOP is not set
-# CONFIG_IDE_GD is not set
-# CONFIG_IDE_PROC_FS is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-# CONFIG_IDLE_PAGE_TRACKING is not set
-# CONFIG_IEEE802154 is not set
-# CONFIG_IEEE802154_ADF7242 is not set
-# CONFIG_IEEE802154_ATUSB is not set
-# CONFIG_IEEE802154_CA8210 is not set
-# CONFIG_IEEE802154_HWSIM is not set
-# CONFIG_IEEE802154_MCR20A is not set
-# CONFIG_IFB is not set
-# CONFIG_IGB is not set
-# CONFIG_IGBVF is not set
-# CONFIG_IIO is not set
-# CONFIG_IIO_BUFFER_CB is not set
-# CONFIG_IIO_BUFFER_HW_CONSUMER is not set
-# CONFIG_IIO_CONFIGFS is not set
-CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
-# CONFIG_IIO_CROS_EC_ACCEL_LEGACY is not set
-# CONFIG_IIO_INTERRUPT_TRIGGER is not set
-# CONFIG_IIO_MUX is not set
-# CONFIG_IIO_PERIODIC_RTC_TRIGGER is not set
-# CONFIG_IIO_RESCALE is not set
-# CONFIG_IIO_SIMPLE_DUMMY is not set
-# CONFIG_IIO_SSP_SENSORHUB is not set
-# CONFIG_IIO_ST_ACCEL_3AXIS is not set
-# CONFIG_IIO_ST_GYRO_3AXIS is not set
-# CONFIG_IIO_ST_LSM6DSX is not set
-# CONFIG_IIO_ST_MAGN_3AXIS is not set
-# CONFIG_IIO_ST_PRESS is not set
-# CONFIG_IIO_SW_DEVICE is not set
-# CONFIG_IIO_SW_TRIGGER is not set
-# CONFIG_IIO_SYSFS_TRIGGER is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_IKCONFIG_PROC is not set
-# CONFIG_IMAGE_CMDLINE_HACK is not set
-# CONFIG_IMGPDC_WDT is not set
-# CONFIG_IMG_MDC_DMA is not set
-# CONFIG_IMX7D_ADC is not set
-# CONFIG_IMX_IPUV3_CORE is not set
-# CONFIG_IMX_THERMAL is not set
-# CONFIG_INA2XX_ADC is not set
-# CONFIG_INDIRECT_PIO is not set
-CONFIG_INET=y
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_TCP_DIAG is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_UDP_DIAG is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_INFTL is not set
-CONFIG_INIT_ENV_ARG_LIMIT=32
-# CONFIG_INLINE_READ_LOCK is not set
-# CONFIG_INLINE_READ_LOCK_BH is not set
-# CONFIG_INLINE_READ_LOCK_IRQ is not set
-# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_READ_TRYLOCK is not set
-CONFIG_INLINE_READ_UNLOCK=y
-# CONFIG_INLINE_READ_UNLOCK_BH is not set
-CONFIG_INLINE_READ_UNLOCK_IRQ=y
-# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_SPIN_LOCK is not set
-# CONFIG_INLINE_SPIN_LOCK_BH is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
-# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_SPIN_TRYLOCK is not set
-# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
-# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
-CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
-# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
-# CONFIG_INLINE_WRITE_LOCK is not set
-# CONFIG_INLINE_WRITE_LOCK_BH is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
-# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
-# CONFIG_INLINE_WRITE_TRYLOCK is not set
-CONFIG_INLINE_WRITE_UNLOCK=y
-# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
-CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
-# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
-CONFIG_INOTIFY_USER=y
-# CONFIG_INPUT is not set
-# CONFIG_INPUT_AD714X is not set
-# CONFIG_INPUT_ADXL34X is not set
-# CONFIG_INPUT_APANEL is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_ATLAS_BTNS is not set
-# CONFIG_INPUT_ATMEL_CAPTOUCH is not set
-# CONFIG_INPUT_AXP20X_PEK is not set
-# CONFIG_INPUT_BMA150 is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_CMA3000 is not set
-# CONFIG_INPUT_DRV260X_HAPTICS is not set
-# CONFIG_INPUT_DRV2665_HAPTICS is not set
-# CONFIG_INPUT_DRV2667_HAPTICS is not set
-# CONFIG_INPUT_E3X0_BUTTON is not set
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_GP2A is not set
-# CONFIG_INPUT_GPIO_BEEPER is not set
-# CONFIG_INPUT_GPIO_DECODER is not set
-# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
-# CONFIG_INPUT_GPIO_TILT_POLLED is not set
-# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set
-# CONFIG_INPUT_IMS_PCU is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-# CONFIG_INPUT_KXTJ9 is not set
-# CONFIG_INPUT_LEDS is not set
-# CONFIG_INPUT_MATRIXKMAP is not set
-# CONFIG_INPUT_MAX8997_HAPTIC is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_MMA8450 is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_MPU3050 is not set
-# CONFIG_INPUT_PALMAS_PWRBUTTON is not set
-# CONFIG_INPUT_PCF8574 is not set
-# CONFIG_INPUT_PCSPKR is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_PWM_BEEPER is not set
-# CONFIG_INPUT_PWM_VIBRA is not set
-# CONFIG_INPUT_REGULATOR_HAPTIC is not set
-# CONFIG_INPUT_SOC_BUTTON_ARRAY is not set
-# CONFIG_INPUT_SPARSEKMAP is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_TPS65218_PWRBUTTON is not set
-# CONFIG_INPUT_TWL4030_PWRBUTTON is not set
-# CONFIG_INPUT_TWL4030_VIBRA is not set
-# CONFIG_INPUT_TWL6040_VIBRA is not set
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_WISTRON_BTNS is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INT340X_THERMAL is not set
-# CONFIG_INTEL_ATOMISP2_PM is not set
-# CONFIG_INTEL_CHT_INT33FE is not set
-# CONFIG_INTEL_HID_EVENT is not set
-# CONFIG_INTEL_IDLE is not set
-# CONFIG_INTEL_IDMA64 is not set
-# CONFIG_INTEL_IOATDMA is not set
-# CONFIG_INTEL_ISH_HID is not set
-# CONFIG_INTEL_MEI is not set
-# CONFIG_INTEL_MEI_ME is not set
-# CONFIG_INTEL_MEI_TXE is not set
-# CONFIG_INTEL_MIC_CARD is not set
-# CONFIG_INTEL_MIC_HOST is not set
-# CONFIG_INTEL_MID_PTI is not set
-# CONFIG_INTEL_OAKTRAIL is not set
-# CONFIG_INTEL_PMC_CORE is not set
-# CONFIG_INTEL_PUNIT_IPC is not set
-# CONFIG_INTEL_RST is not set
-# CONFIG_INTEL_SMARTCONNECT is not set
-# CONFIG_INTEL_SOC_PMIC is not set
-# CONFIG_INTEL_SOC_PMIC_CHTDC_TI is not set
-# CONFIG_INTEL_SOC_PMIC_CHTWC is not set
-# CONFIG_INTEL_TH is not set
-# CONFIG_INTEL_VBTN is not set
-# CONFIG_INTEL_XWAY_PHY is not set
-# CONFIG_INTERVAL_TREE_TEST is not set
-# CONFIG_INV_MPU6050_I2C is not set
-# CONFIG_INV_MPU6050_IIO is not set
-# CONFIG_INV_MPU6050_SPI is not set
-# CONFIG_IOMMU_SUPPORT is not set
-# CONFIG_IOSCHED_BFQ is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IO_STRICT_DEVMEM=y
-# CONFIG_IP17XX_PHY is not set
-# CONFIG_IP6_NF_FILTER is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP6_NF_MANGLE is not set
-# CONFIG_IP6_NF_MATCH_AH is not set
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_MH is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_RPFILTER is not set
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_MATCH_SRH is not set
-# CONFIG_IP6_NF_NAT is not set
-# CONFIG_IP6_NF_RAW is not set
-# CONFIG_IP6_NF_SECURITY is not set
-# CONFIG_IP6_NF_TARGET_HL is not set
-# CONFIG_IP6_NF_TARGET_REJECT is not set
-# CONFIG_IP6_NF_TARGET_SYNPROXY is not set
-# CONFIG_IPACK_BUS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_IPV6 is not set
-# CONFIG_IPV6_FOU is not set
-# CONFIG_IPV6_FOU_TUNNEL is not set
-# CONFIG_IPV6_ILA is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_IPV6_MROUTE_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_ROUTE_INFO is not set
-# CONFIG_IPV6_SEG6_HMAC is not set
-# CONFIG_IPV6_SEG6_LWTUNNEL is not set
-# CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_SIT_6RD is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_VTI is not set
-# CONFIG_IPVLAN is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2100_DEBUG is not set
-CONFIG_IPW2100_MONITOR=y
-# CONFIG_IPW2200 is not set
-# CONFIG_IPW2200_DEBUG is not set
-CONFIG_IPW2200_MONITOR=y
-# CONFIG_IPW2200_PROMISCUOUS is not set
-# CONFIG_IPW2200_QOS is not set
-# CONFIG_IPW2200_RADIOTAP is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_IPX is not set
-CONFIG_IP_ADVANCED_ROUTER=y
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_FIB_TRIE_STATS is not set
-# CONFIG_IP_MROUTE is not set
-CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_MULTIPLE_TABLES=y
-# CONFIG_IP_NF_ARPFILTER is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_NF_ARP_MANGLE is not set
-# CONFIG_IP_NF_FILTER is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_MATCH_AH is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_RPFILTER is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_RAW is not set
-# CONFIG_IP_NF_SECURITY is not set
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_MASQUERADE is not set
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_REDIRECT is not set
-# CONFIG_IP_NF_TARGET_REJECT is not set
-# CONFIG_IP_NF_TARGET_SYNPROXY is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-# CONFIG_IP_PIMSM_V1 is not set
-# CONFIG_IP_PIMSM_V2 is not set
-# CONFIG_IP_PNP is not set
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_IP_SET is not set
-# CONFIG_IP_SET_HASH_IPMAC is not set
-# CONFIG_IP_VS is not set
-# CONFIG_IP_VS_MH is not set
-CONFIG_IP_VS_MH_TAB_INDEX=10
-# CONFIG_IRDA is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_IRQ_ALL_CPUS is not set
-# CONFIG_IRQ_DOMAIN_DEBUG is not set
-# CONFIG_IRQ_POLL is not set
-# CONFIG_IRQ_TIME_ACCOUNTING is not set
-# CONFIG_IR_GPIO_CIR is not set
-# CONFIG_IR_HIX5HD2 is not set
-# CONFIG_IR_IGORPLUGUSB is not set
-# CONFIG_IR_IGUANA is not set
-# CONFIG_IR_IMG is not set
-# CONFIG_IR_IMON is not set
-# CONFIG_IR_JVC_DECODER is not set
-# CONFIG_IR_LIRC_CODEC is not set
-# CONFIG_IR_MCEUSB is not set
-# CONFIG_IR_NEC_DECODER is not set
-# CONFIG_IR_RC5_DECODER is not set
-# CONFIG_IR_RC6_DECODER is not set
-# CONFIG_IR_REDRAT3 is not set
-# CONFIG_IR_SONY_DECODER is not set
-# CONFIG_IR_STREAMZAP is not set
-# CONFIG_IR_TTUSBIR is not set
-# CONFIG_ISA_BUS is not set
-# CONFIG_ISA_BUS_API is not set
-# CONFIG_ISCSI_BOOT_SYSFS is not set
-# CONFIG_ISCSI_TCP is not set
-CONFIG_ISDN=y
-# CONFIG_ISDN_AUDIO is not set
-# CONFIG_ISDN_CAPI is not set
-# CONFIG_ISDN_CAPI_CAPIDRV is not set
-# CONFIG_ISDN_DIVERSION is not set
-# CONFIG_ISDN_DRV_ACT2000 is not set
-# CONFIG_ISDN_DRV_GIGASET is not set
-# CONFIG_ISDN_DRV_HISAX is not set
-# CONFIG_ISDN_DRV_ICN is not set
-# CONFIG_ISDN_DRV_LOOP is not set
-# CONFIG_ISDN_DRV_PCBIT is not set
-# CONFIG_ISDN_DRV_SC is not set
-# CONFIG_ISDN_I4L is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_ISL29020 is not set
-# CONFIG_ISL29125 is not set
-# CONFIG_ISL29501 is not set
-# CONFIG_ISO9660_FS is not set
-# CONFIG_ISS4xx is not set
-# CONFIG_ITG3200 is not set
-# CONFIG_IWL3945 is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_IXGB is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGBEVF is not set
-# CONFIG_JAILHOUSE_GUEST is not set
-# CONFIG_JBD2_DEBUG is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_POSIX_ACL is not set
-# CONFIG_JFFS2_FS_SECURITY is not set
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_LZMA=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_JFFS2_SUMMARY=y
-# CONFIG_JFFS2_ZLIB is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_STATISTICS is not set
-# CONFIG_JME is not set
-CONFIG_JOLIET=y
-# CONFIG_JSA1212 is not set
-# CONFIG_JUMP_LABEL is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_KALLSYMS_ABSOLUTE_PERCPU is not set
-# CONFIG_KALLSYMS_ALL is not set
-CONFIG_KALLSYMS_BASE_RELATIVE=y
-# CONFIG_KALLSYMS_UNCOMPRESSED is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_KASAN is not set
-# CONFIG_KCOV is not set
-# CONFIG_KERNEL_BZIP2 is not set
-# CONFIG_KERNEL_CAT is not set
-# CONFIG_KERNEL_GZIP is not set
-# CONFIG_KERNEL_LZ4 is not set
-# CONFIG_KERNEL_LZMA is not set
-# CONFIG_KERNEL_LZO is not set
-CONFIG_KERNEL_MODE_NEON=y
-CONFIG_KERNEL_XZ=y
-CONFIG_KERNFS=y
-# CONFIG_KEXEC is not set
-# CONFIG_KEXEC_FILE is not set
-# CONFIG_KEYBOARD_ADC is not set
-# CONFIG_KEYBOARD_ADP5588 is not set
-# CONFIG_KEYBOARD_ADP5589 is not set
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_BCM is not set
-# CONFIG_KEYBOARD_CAP11XX is not set
-# CONFIG_KEYBOARD_DLINK_DIR685 is not set
-# CONFIG_KEYBOARD_GPIO is not set
-# CONFIG_KEYBOARD_GPIO_POLLED is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_LM8323 is not set
-# CONFIG_KEYBOARD_LM8333 is not set
-# CONFIG_KEYBOARD_MATRIX is not set
-# CONFIG_KEYBOARD_MAX7359 is not set
-# CONFIG_KEYBOARD_MCS is not set
-# CONFIG_KEYBOARD_MPR121 is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_OMAP4 is not set
-# CONFIG_KEYBOARD_OPENCORES is not set
-# CONFIG_KEYBOARD_PXA27x is not set
-# CONFIG_KEYBOARD_QT1070 is not set
-# CONFIG_KEYBOARD_QT2160 is not set
-# CONFIG_KEYBOARD_SAMSUNG is not set
-# CONFIG_KEYBOARD_SH_KEYSC is not set
-# CONFIG_KEYBOARD_SNVS_PWRKEY is not set
-# CONFIG_KEYBOARD_STMPE is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_TCA6416 is not set
-# CONFIG_KEYBOARD_TCA8418 is not set
-# CONFIG_KEYBOARD_TEGRA is not set
-# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
-# CONFIG_KEYBOARD_TWL4030 is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYS is not set
-# CONFIG_KEY_DH_OPERATIONS is not set
-# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
-# CONFIG_KMX61 is not set
-# CONFIG_KPROBES is not set
-# CONFIG_KPROBES_SANITY_TEST is not set
-# CONFIG_KS7010 is not set
-# CONFIG_KS8842 is not set
-# CONFIG_KS8851 is not set
-# CONFIG_KS8851_MLL is not set
-# CONFIG_KSM is not set
-# CONFIG_KSZ884X_PCI is not set
-CONFIG_KUSER_HELPERS=y
-# CONFIG_KVM_AMD is not set
-# CONFIG_KVM_GUEST is not set
-# CONFIG_KVM_INTEL is not set
-# CONFIG_KXCJK1013 is not set
-# CONFIG_KXSD9 is not set
-# CONFIG_L2TP is not set
-# CONFIG_L2TP_ETH is not set
-# CONFIG_L2TP_IP is not set
-# CONFIG_L2TP_V3 is not set
-# CONFIG_LAN743X is not set
-# CONFIG_LANMEDIA is not set
-# CONFIG_LANTIQ is not set
-# CONFIG_LAPB is not set
-# CONFIG_LASAT is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_LATTICE_ECP3_CONFIG is not set
-CONFIG_LBDAF=y
-# CONFIG_LCD_AMS369FG06 is not set
-# CONFIG_LCD_HX8357 is not set
-# CONFIG_LCD_ILI922X is not set
-# CONFIG_LCD_ILI9320 is not set
-# CONFIG_LCD_L4F00242T03 is not set
-# CONFIG_LCD_LD9040 is not set
-# CONFIG_LCD_LMS283GF05 is not set
-# CONFIG_LCD_LMS501KF03 is not set
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_OTM3225A is not set
-# CONFIG_LCD_S6E63M0 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-CONFIG_LDISC_AUTOLOAD=y
-# CONFIG_LDM_PARTITION is not set
-CONFIG_LD_DEAD_CODE_DATA_ELIMINATION=y
-# CONFIG_LEDS_APU is not set
-# CONFIG_LEDS_BCM6328 is not set
-# CONFIG_LEDS_BCM6358 is not set
-# CONFIG_LEDS_BD2802 is not set
-# CONFIG_LEDS_BLINKM is not set
-CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y
-CONFIG_LEDS_CLASS=y
-# CONFIG_LEDS_CLASS_FLASH is not set
-# CONFIG_LEDS_CR0014114 is not set
-# CONFIG_LEDS_DAC124S085 is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEDS_INTEL_SS4200 is not set
-# CONFIG_LEDS_IS31FL319X is not set
-# CONFIG_LEDS_IS31FL32XX is not set
-# CONFIG_LEDS_LM3530 is not set
-# CONFIG_LEDS_LM355x is not set
-# CONFIG_LEDS_LM3642 is not set
-# CONFIG_LEDS_LM3692X is not set
-# CONFIG_LEDS_LP3944 is not set
-# CONFIG_LEDS_LP3952 is not set
-# CONFIG_LEDS_LP5521 is not set
-# CONFIG_LEDS_LP5523 is not set
-# CONFIG_LEDS_LP5562 is not set
-# CONFIG_LEDS_LP8501 is not set
-# CONFIG_LEDS_LP8860 is not set
-# CONFIG_LEDS_LT3593 is not set
-# CONFIG_LEDS_MLXCPLD is not set
-# CONFIG_LEDS_MLXREG is not set
-# CONFIG_LEDS_NIC78BX is not set
-# CONFIG_LEDS_NS2 is not set
-# CONFIG_LEDS_OT200 is not set
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_PCA963X is not set
-# CONFIG_LEDS_PWM is not set
-# CONFIG_LEDS_REGULATOR is not set
-# CONFIG_LEDS_SYSCON is not set
-# CONFIG_LEDS_TCA6507 is not set
-# CONFIG_LEDS_TLC591XX is not set
-CONFIG_LEDS_TRIGGERS=y
-# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-# CONFIG_LEDS_TRIGGER_CAMERA is not set
-# CONFIG_LEDS_TRIGGER_CPU is not set
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-# CONFIG_LEDS_TRIGGER_DISK is not set
-# CONFIG_LEDS_TRIGGER_GPIO is not set
-# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
-# CONFIG_LEDS_TRIGGER_MTD is not set
-CONFIG_LEDS_TRIGGER_NETDEV=y
-# CONFIG_LEDS_TRIGGER_ONESHOT is not set
-# CONFIG_LEDS_TRIGGER_PANIC is not set
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
-# CONFIG_LEDS_USER is not set
-# CONFIG_LED_TRIGGER_PHY is not set
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_LGUEST is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_LIB80211_CRYPT_CCMP is not set
-# CONFIG_LIB80211_CRYPT_TKIP is not set
-# CONFIG_LIB80211_CRYPT_WEP is not set
-# CONFIG_LIB80211_DEBUG is not set
-# CONFIG_LIBCRC32C is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_LIBERTAS_USB is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBFCOE is not set
-# CONFIG_LIBIPW_DEBUG is not set
-# CONFIG_LIBNVDIMM is not set
-# CONFIG_LIDAR_LITE_V2 is not set
-# CONFIG_LIQUIDIO is not set
-# CONFIG_LIQUIDIO_VF is not set
-# CONFIG_LIS3L02DQ is not set
-# CONFIG_LKDTM is not set
-CONFIG_LLC=y
-# CONFIG_LLC2 is not set
-# CONFIG_LMP91000 is not set
-# CONFIG_LNET is not set
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_LOCKD is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_LOCKD_V4=y
-# CONFIG_LOCKUP_DETECTOR is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_LOCK_TORTURE_TEST is not set
-# CONFIG_LOGFS is not set
-# CONFIG_LOGIG940_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIWHEELS_FF is not set
-# CONFIG_LOGO is not set
-CONFIG_LOG_BUF_SHIFT=17
-CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
-# CONFIG_LOONGSON_MC146818 is not set
-# CONFIG_LPC_ICH is not set
-# CONFIG_LPC_SCH is not set
-# CONFIG_LP_CONSOLE is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_LTC2471 is not set
-# CONFIG_LTC2485 is not set
-# CONFIG_LTC2497 is not set
-# CONFIG_LTC2632 is not set
-# CONFIG_LTE_GDM724X is not set
-# CONFIG_LTPC is not set
-# CONFIG_LTR501 is not set
-# CONFIG_LUSTRE_FS is not set
-# CONFIG_LV0104CS is not set
-# CONFIG_LWTUNNEL is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_LZ4HC_COMPRESS is not set
-# CONFIG_LZ4_COMPRESS is not set
-# CONFIG_LZ4_DECOMPRESS is not set
-CONFIG_LZMA_COMPRESS=y
-CONFIG_LZMA_DECOMPRESS=y
-# CONFIG_LZO_COMPRESS is not set
-# CONFIG_LZO_DECOMPRESS is not set
-# CONFIG_M62332 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_MAC80211_MESSAGE_TRACING is not set
-CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
-# CONFIG_MACB is not set
-# CONFIG_MACH_ASM9260 is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_INGENIC is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_JZ4740 is not set
-# CONFIG_MACH_LOONGSON32 is not set
-# CONFIG_MACH_LOONGSON64 is not set
-# CONFIG_MACH_PIC32 is not set
-# CONFIG_MACH_PISTACHIO is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_MACH_XILFPGA is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-# CONFIG_MACSEC is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_MACVTAP is not set
-# CONFIG_MAC_EMUMOUSEBTN is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MAG3110 is not set
-# CONFIG_MAGIC_SYSRQ is not set
-CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
-# CONFIG_MAGIC_SYSRQ_SERIAL is not set
-# CONFIG_MAILBOX is not set
-# CONFIG_MANAGER_SBS is not set
-# CONFIG_MANDATORY_FILE_LOCKING is not set
-# CONFIG_MANGLE_BOOTARGS is not set
-# CONFIG_MARVELL_10G_PHY is not set
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_MAX1027 is not set
-# CONFIG_MAX11100 is not set
-# CONFIG_MAX1118 is not set
-# CONFIG_MAX1363 is not set
-# CONFIG_MAX30100 is not set
-# CONFIG_MAX30102 is not set
-# CONFIG_MAX44000 is not set
-# CONFIG_MAX517 is not set
-# CONFIG_MAX5481 is not set
-# CONFIG_MAX5487 is not set
-# CONFIG_MAX5821 is not set
-# CONFIG_MAX63XX_WATCHDOG is not set
-# CONFIG_MAX9611 is not set
-# CONFIG_MAXIM_THERMOCOUPLE is not set
-CONFIG_MAY_USE_DEVLINK=y
-# CONFIG_MC3230 is not set
-# CONFIG_MCB is not set
-# CONFIG_MCP320X is not set
-# CONFIG_MCP3422 is not set
-# CONFIG_MCP4018 is not set
-# CONFIG_MCP4131 is not set
-# CONFIG_MCP4531 is not set
-# CONFIG_MCP4725 is not set
-# CONFIG_MCP4922 is not set
-# CONFIG_MCPM is not set
-# CONFIG_MD is not set
-# CONFIG_MDIO_BCM_UNIMAC is not set
-# CONFIG_MDIO_BITBANG is not set
-# CONFIG_MDIO_BUS_MUX_GPIO is not set
-# CONFIG_MDIO_BUS_MUX_MMIOREG is not set
-# CONFIG_MDIO_DEVICE is not set
-# CONFIG_MDIO_HISI_FEMAC is not set
-# CONFIG_MDIO_MSCC_MIIM is not set
-# CONFIG_MDIO_OCTEON is not set
-# CONFIG_MDIO_THUNDER is not set
-# CONFIG_MD_FAULTY is not set
-# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
-# CONFIG_MEDIA_ATTACH is not set
-# CONFIG_MEDIA_CAMERA_SUPPORT is not set
-# CONFIG_MEDIA_CEC_SUPPORT is not set
-# CONFIG_MEDIA_CONTROLLER is not set
-# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
-# CONFIG_MEDIA_PCI_SUPPORT is not set
-# CONFIG_MEDIA_RADIO_SUPPORT is not set
-# CONFIG_MEDIA_RC_SUPPORT is not set
-# CONFIG_MEDIA_SDR_SUPPORT is not set
-# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
-# CONFIG_MEDIA_SUPPORT is not set
-# CONFIG_MEDIA_USB_SUPPORT is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_MELLANOX_PLATFORM is not set
-CONFIG_MEMBARRIER=y
-# CONFIG_MEMORY is not set
-# CONFIG_MEMORY_FAILURE is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_MEMTEST is not set
-# CONFIG_MEN_A21_WDT is not set
-# CONFIG_MESON_SM is not set
-CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
-# CONFIG_MFD_88PM800 is not set
-# CONFIG_MFD_88PM805 is not set
-# CONFIG_MFD_88PM860X is not set
-# CONFIG_MFD_AAT2870_CORE is not set
-# CONFIG_MFD_ACT8945A is not set
-# CONFIG_MFD_ARIZONA_I2C is not set
-# CONFIG_MFD_ARIZONA_SPI is not set
-# CONFIG_MFD_AS3711 is not set
-# CONFIG_MFD_AS3722 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_MFD_ATMEL_FLEXCOM is not set
-# CONFIG_MFD_ATMEL_HLCDC is not set
-# CONFIG_MFD_AXP20X is not set
-# CONFIG_MFD_AXP20X_I2C is not set
-# CONFIG_MFD_BCM590XX is not set
-# CONFIG_MFD_BD9571MWV is not set
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_CPCAP is not set
-# CONFIG_MFD_CROS_EC is not set
-# CONFIG_MFD_CS5535 is not set
-# CONFIG_MFD_DA9052_I2C is not set
-# CONFIG_MFD_DA9052_SPI is not set
-# CONFIG_MFD_DA9055 is not set
-# CONFIG_MFD_DA9062 is not set
-# CONFIG_MFD_DA9063 is not set
-# CONFIG_MFD_DA9150 is not set
-# CONFIG_MFD_DLN2 is not set
-# CONFIG_MFD_EXYNOS_LPASS is not set
-# CONFIG_MFD_HI6421_PMIC is not set
-# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
-# CONFIG_MFD_JANZ_CMODIO is not set
-# CONFIG_MFD_KEMPLD is not set
-# CONFIG_MFD_LM3533 is not set
-# CONFIG_MFD_LP3943 is not set
-# CONFIG_MFD_LP8788 is not set
-# CONFIG_MFD_MADERA is not set
-# CONFIG_MFD_MAX14577 is not set
-# CONFIG_MFD_MAX77620 is not set
-# CONFIG_MFD_MAX77686 is not set
-# CONFIG_MFD_MAX77693 is not set
-# CONFIG_MFD_MAX77843 is not set
-# CONFIG_MFD_MAX8907 is not set
-# CONFIG_MFD_MAX8925 is not set
-# CONFIG_MFD_MAX8997 is not set
-# CONFIG_MFD_MAX8998 is not set
-# CONFIG_MFD_MC13XXX is not set
-# CONFIG_MFD_MC13XXX_I2C is not set
-# CONFIG_MFD_MC13XXX_SPI is not set
-# CONFIG_MFD_MENF21BMC is not set
-# CONFIG_MFD_MT6397 is not set
-# CONFIG_MFD_OMAP_USB_HOST is not set
-# CONFIG_MFD_PALMAS is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_PM8921_CORE is not set
-# CONFIG_MFD_PM8XXX is not set
-# CONFIG_MFD_RC5T583 is not set
-# CONFIG_MFD_RDC321X is not set
-# CONFIG_MFD_RETU is not set
-# CONFIG_MFD_RK808 is not set
-# CONFIG_MFD_RN5T618 is not set
-# CONFIG_MFD_ROHM_BD718XX is not set
-# CONFIG_MFD_RT5033 is not set
-# CONFIG_MFD_RTSX_PCI is not set
-# CONFIG_MFD_RTSX_USB is not set
-# CONFIG_MFD_SEC_CORE is not set
-# CONFIG_MFD_SI476X_CORE is not set
-# CONFIG_MFD_SKY81452 is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_SMSC is not set
-# CONFIG_MFD_STMPE is not set
-# CONFIG_MFD_SYSCON is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC3589X is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_MFD_TIMBERDALE is not set
-# CONFIG_MFD_TI_AM335X_TSCADC is not set
-# CONFIG_MFD_TI_LMU is not set
-# CONFIG_MFD_TI_LP873X is not set
-# CONFIG_MFD_TI_LP87565 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_TPS65086 is not set
-# CONFIG_MFD_TPS65090 is not set
-# CONFIG_MFD_TPS65217 is not set
-# CONFIG_MFD_TPS65218 is not set
-# CONFIG_MFD_TPS6586X is not set
-# CONFIG_MFD_TPS65910 is not set
-# CONFIG_MFD_TPS65912 is not set
-# CONFIG_MFD_TPS65912_I2C is not set
-# CONFIG_MFD_TPS65912_SPI is not set
-# CONFIG_MFD_TPS68470 is not set
-# CONFIG_MFD_TPS80031 is not set
-# CONFIG_MFD_VIPERBOARD is not set
-# CONFIG_MFD_VX855 is not set
-# CONFIG_MFD_WL1273_CORE is not set
-# CONFIG_MFD_WM831X is not set
-# CONFIG_MFD_WM831X_I2C is not set
-# CONFIG_MFD_WM831X_SPI is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8994 is not set
-# CONFIG_MG_DISK is not set
-# CONFIG_MICREL_KS8995MA is not set
-# CONFIG_MICREL_PHY is not set
-# CONFIG_MICROCHIP_KSZ is not set
-# CONFIG_MICROCHIP_PHY is not set
-# CONFIG_MICROCHIP_T1_PHY is not set
-# CONFIG_MICROSEMI_PHY is not set
-# CONFIG_MIGRATION is not set
-CONFIG_MII=y
-# CONFIG_MIKROTIK_RB532 is not set
-# CONFIG_MIKROTIK is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_MINIX_FS_NATIVE_ENDIAN is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_MIPS_ALCHEMY is not set
-# CONFIG_MIPS_CDMM is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MIPS_FPU_EMULATOR is not set
-# CONFIG_MIPS_GENERIC is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_MIPS_O32_FP64_SUPPORT is not set
-# CONFIG_MIPS_PARAVIRT is not set
-# CONFIG_MIPS_PLATFORM_DEVICES is not set
-# CONFIG_MIPS_SEAD3 is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_MISC_RTSX_PCI is not set
-# CONFIG_MISC_RTSX_USB is not set
-# CONFIG_MISDN is not set
-# CONFIG_MISDN_AVMFRITZ is not set
-# CONFIG_MISDN_HFCPCI is not set
-# CONFIG_MISDN_HFCUSB is not set
-# CONFIG_MISDN_INFINEON is not set
-# CONFIG_MISDN_NETJET is not set
-# CONFIG_MISDN_SPEEDFAX is not set
-# CONFIG_MISDN_W6692 is not set
-# CONFIG_MKISS is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX5_CORE is not set
-# CONFIG_MLX90614 is not set
-# CONFIG_MLX90632 is not set
-# CONFIG_MLXFW is not set
-# CONFIG_MLXSW_CORE is not set
-# CONFIG_MLX_CPLD_PLATFORM is not set
-# CONFIG_MLX_PLATFORM is not set
-# CONFIG_MMA7455_I2C is not set
-# CONFIG_MMA7455_SPI is not set
-# CONFIG_MMA7660 is not set
-# CONFIG_MMA8452 is not set
-# CONFIG_MMA9551 is not set
-# CONFIG_MMA9553 is not set
-# CONFIG_MMC is not set
-# CONFIG_MMC35240 is not set
-# CONFIG_MMC_ARMMMCI is not set
-# CONFIG_MMC_AU1X is not set
-# CONFIG_MMC_BLOCK is not set
-CONFIG_MMC_BLOCK_BOUNCE=y
-CONFIG_MMC_BLOCK_MINORS=8
-# CONFIG_MMC_CAVIUM_THUNDERX is not set
-# CONFIG_MMC_CB710 is not set
-# CONFIG_MMC_CQHCI is not set
-# CONFIG_MMC_DEBUG is not set
-# CONFIG_MMC_DW is not set
-# CONFIG_MMC_MTK is not set
-# CONFIG_MMC_MVSDIO is not set
-# CONFIG_MMC_S3C is not set
-# CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_SDHCI_ACPI is not set
-# CONFIG_MMC_SDHCI_BCM_KONA is not set
-# CONFIG_MMC_SDHCI_CADENCE is not set
-# CONFIG_MMC_SDHCI_F_SDH30 is not set
-# CONFIG_MMC_SDHCI_IPROC is not set
-# CONFIG_MMC_SDHCI_MSM is not set
-# CONFIG_MMC_SDHCI_OF_ARASAN is not set
-# CONFIG_MMC_SDHCI_OF_AT91 is not set
-# CONFIG_MMC_SDHCI_OF_DWCMSHC is not set
-# CONFIG_MMC_SDHCI_OF_ESDHC is not set
-# CONFIG_MMC_SDHCI_OF_HLWD is not set
-# CONFIG_MMC_SDHCI_OMAP is not set
-# CONFIG_MMC_SDHCI_PXAV2 is not set
-# CONFIG_MMC_SDHCI_PXAV3 is not set
-# CONFIG_MMC_SDHCI_S3C is not set
-# CONFIG_MMC_SDHCI_XENON is not set
-# CONFIG_MMC_SDRICOH_CS is not set
-# CONFIG_MMC_SPI is not set
-# CONFIG_MMC_TEST is not set
-# CONFIG_MMC_TOSHIBA_PCI is not set
-# CONFIG_MMC_USDHI6ROL0 is not set
-# CONFIG_MMC_USHC is not set
-# CONFIG_MMC_VIA_SDMMC is not set
-# CONFIG_MMC_VUB300 is not set
-# CONFIG_MMIOTRACE is not set
-CONFIG_MMU=y
-CONFIG_MODULES=y
-# CONFIG_MODULE_COMPRESS is not set
-# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODULE_SIG is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_MODULE_STRIPPED=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MOST is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_ELAN_I2C is not set
-# CONFIG_MOUSE_GPIO is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_PS2_FOCALTECH is not set
-# CONFIG_MOUSE_PS2_SENTELIC is not set
-# CONFIG_MOUSE_SYNAPTICS_I2C is not set
-# CONFIG_MOUSE_SYNAPTICS_USB is not set
-# CONFIG_MPL115 is not set
-# CONFIG_MPL115_I2C is not set
-# CONFIG_MPL115_SPI is not set
-# CONFIG_MPL3115 is not set
-# CONFIG_MPLS is not set
-# CONFIG_MPU3050_I2C is not set
-# CONFIG_MQ_IOSCHED_DEADLINE is not set
-# CONFIG_MQ_IOSCHED_KYBER is not set
-# CONFIG_MS5611 is not set
-# CONFIG_MS5637 is not set
-# CONFIG_MSCC_OCELOT_SWITCH is not set
-# CONFIG_MSDOS_FS is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_MSI_LAPTOP is not set
-CONFIG_MTD=y
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_MTD_BLOCK2MTD is not set
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_DOCG3 is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_GPIO_ADDR is not set
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_JEDECPROBE is not set
-# CONFIG_MTD_LATCH_ADDR is not set
-# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_LPDDR2_NVM is not set
-# CONFIG_MTD_M25P80 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MCHP23K256 is not set
-# CONFIG_MTD_MT81xx_NOR is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_MYLOADER_PARTS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_NAND_AMS_DELTA is not set
-# CONFIG_MTD_NAND_AR934X is not set
-# CONFIG_MTD_NAND_AR934X_HW_ECC is not set
-# CONFIG_MTD_NAND_ATMEL is not set
-# CONFIG_MTD_NAND_AU1550 is not set
-# CONFIG_MTD_NAND_BCH is not set
-# CONFIG_MTD_NAND_BF5XX is not set
-# CONFIG_MTD_NAND_BRCMNAND is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_CM_X270 is not set
-# CONFIG_MTD_NAND_CS553X is not set
-# CONFIG_MTD_NAND_DAVINCI is not set
-# CONFIG_MTD_NAND_DENALI is not set
-# CONFIG_MTD_NAND_DENALI_DT is not set
-# CONFIG_MTD_NAND_DENALI_PCI is not set
-CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xff108018
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_DOCG4 is not set
-# CONFIG_MTD_NAND_ECC is not set
-# CONFIG_MTD_NAND_ECC_BCH is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_FSL_ELBC is not set
-# CONFIG_MTD_NAND_FSL_IFC is not set
-# CONFIG_MTD_NAND_FSL_UPM is not set
-# CONFIG_MTD_NAND_FSMC is not set
-# CONFIG_MTD_NAND_GPIO is not set
-# CONFIG_MTD_NAND_GPMI_NAND is not set
-# CONFIG_MTD_NAND_HISI504 is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_JZ4740 is not set
-# CONFIG_MTD_NAND_MPC5121_NFC is not set
-# CONFIG_MTD_NAND_MTK is not set
-# CONFIG_MTD_NAND_MXC is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_NDFC is not set
-# CONFIG_MTD_NAND_NUC900 is not set
-# CONFIG_MTD_NAND_OMAP2 is not set
-# CONFIG_MTD_NAND_OMAP_BCH_BUILD is not set
-# CONFIG_MTD_NAND_ORION is not set
-# CONFIG_MTD_NAND_PASEMI is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_NAND_PXA3xx is not set
-# CONFIG_MTD_NAND_RB4XX is not set
-# CONFIG_MTD_NAND_RB750 is not set
-# CONFIG_MTD_NAND_RICOH is not set
-# CONFIG_MTD_NAND_S3C2410 is not set
-# CONFIG_MTD_NAND_SHARPSL is not set
-# CONFIG_MTD_NAND_SH_FLCTL is not set
-# CONFIG_MTD_NAND_SOCRATES is not set
-# CONFIG_MTD_NAND_TMIO is not set
-# CONFIG_MTD_NAND_TXX9NDFMC is not set
-CONFIG_MTD_OF_PARTS=y
-# CONFIG_MTD_ONENAND is not set
-# CONFIG_MTD_OOPS is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_PARTITIONED_MASTER is not set
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PCMCIA is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PHYSMAP_COMPAT is not set
-CONFIG_MTD_PHYSMAP_OF=y
-# CONFIG_MTD_PHYSMAP_OF_GEMINI is not set
-# CONFIG_MTD_PHYSMAP_OF_VERSATILE is not set
-# CONFIG_MTD_PLATRAM is not set
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_RAM is not set
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_ROM is not set
-CONFIG_MTD_ROOTFS_ROOT_DEV=y
-# CONFIG_MTD_ROUTERBOOT_PARTS is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_SM_COMMON is not set
-# CONFIG_MTD_SPINAND_MT29F is not set
-# CONFIG_MTD_SPI_NAND is not set
-# CONFIG_MTD_SPI_NOR is not set
-# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT=4096
-CONFIG_MTD_SPLIT=y
-# CONFIG_MTD_SPLIT_BCM_WFI_FW is not set
-# CONFIG_MTD_SPLIT_BRNIMAGE_FW is not set
-# CONFIG_MTD_SPLIT_ELF_FW is not set
-# CONFIG_MTD_SPLIT_EVA_FW is not set
-# CONFIG_MTD_SPLIT_FIRMWARE is not set
-CONFIG_MTD_SPLIT_FIRMWARE_NAME="firmware"
-# CONFIG_MTD_SPLIT_FIT_FW is not set
-# CONFIG_MTD_SPLIT_JIMAGE_FW is not set
-# CONFIG_MTD_SPLIT_LZMA_FW is not set
-# CONFIG_MTD_SPLIT_MINOR_FW is not set
-# CONFIG_MTD_SPLIT_SEAMA_FW is not set
-CONFIG_MTD_SPLIT_SQUASHFS_ROOT=y
-CONFIG_MTD_SPLIT_SUPPORT=y
-# CONFIG_MTD_SPLIT_TPLINK_FW is not set
-# CONFIG_MTD_SPLIT_TRX_FW is not set
-# CONFIG_MTD_SPLIT_UIMAGE_FW is not set
-# CONFIG_MTD_SPLIT_WRGG_FW is not set
-# CONFIG_MTD_SST25L is not set
-# CONFIG_MTD_SWAP is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_UBI is not set
-# CONFIG_MTD_UIMAGE_SPLIT is not set
-# CONFIG_MTD_VIRT_CONCAT is not set
-# CONFIG_MTK_MMC is not set
-CONFIG_MULTIUSER=y
-# CONFIG_MUTEX_SPIN_ON_OWNER is not set
-# CONFIG_MV643XX_ETH is not set
-# CONFIG_MVMDIO is not set
-# CONFIG_MVNETA_BM is not set
-# CONFIG_MVSW61XX_PHY is not set
-# CONFIG_MVSWITCH_PHY is not set
-# CONFIG_MV_XOR_V2 is not set
-# CONFIG_MWAVE is not set
-# CONFIG_MWL8K is not set
-# CONFIG_MXC4005 is not set
-# CONFIG_MXC6255 is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NAU7802 is not set
-# CONFIG_NBPFAXI_DMA is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_NE2000 is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_NEC_MARKEINS is not set
-CONFIG_NET=y
-# CONFIG_NETCONSOLE is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVSIM is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_NETFILTER_ADVANCED is not set
-# CONFIG_NETFILTER_DEBUG is not set
-# CONFIG_NETFILTER_INGRESS is not set
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NETFILTER_NETLINK_ACCT is not set
-# CONFIG_NETFILTER_NETLINK_GLUE_CT is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NETFILTER_NETLINK_OSF is not set
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_NETFILTER_XT_CONNMARK is not set
-# CONFIG_NETFILTER_XT_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_BPF is not set
-# CONFIG_NETFILTER_XT_MATCH_CGROUP is not set
-# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNLABEL is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
-# CONFIG_NETFILTER_XT_MATCH_CPU is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ECN is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
-# CONFIG_NETFILTER_XT_MATCH_HL is not set
-# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_L2TP is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
-# CONFIG_NETFILTER_XT_MATCH_OSF is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_SOCKET is not set
-# CONFIG_NETFILTER_XT_MATCH_STATE is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_NETFILTER_XT_TARGET_AUDIT is not set
-# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_CT is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_HL is not set
-# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
-# CONFIG_NETFILTER_XT_TARGET_LED is not set
-# CONFIG_NETFILTER_XT_TARGET_LOG is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NETMAP is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_REDIRECT is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_TARGET_TEE is not set
-# CONFIG_NETFILTER_XT_TARGET_TPROXY is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETLINK_DIAG is not set
-# CONFIG_NETLINK_MMAP is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NETROM is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NET_9P is not set
-# CONFIG_NET_ACT_BPF is not set
-# CONFIG_NET_ACT_CSUM is not set
-# CONFIG_NET_ACT_GACT is not set
-# CONFIG_NET_ACT_IFE is not set
-# CONFIG_NET_ACT_IPT is not set
-# CONFIG_NET_ACT_MIRRED is not set
-# CONFIG_NET_ACT_NAT is not set
-# CONFIG_NET_ACT_PEDIT is not set
-# CONFIG_NET_ACT_POLICE is not set
-# CONFIG_NET_ACT_SAMPLE is not set
-# CONFIG_NET_ACT_SIMP is not set
-# CONFIG_NET_ACT_SKBEDIT is not set
-# CONFIG_NET_ACT_SKBMOD is not set
-# CONFIG_NET_ACT_TUNNEL_KEY is not set
-# CONFIG_NET_ACT_VLAN is not set
-CONFIG_NET_CADENCE=y
-# CONFIG_NET_CALXEDA_XGMAC is not set
-CONFIG_NET_CLS=y
-# CONFIG_NET_CLS_ACT is not set
-# CONFIG_NET_CLS_BASIC is not set
-# CONFIG_NET_CLS_BPF is not set
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_CLS_FLOWER is not set
-# CONFIG_NET_CLS_FW is not set
-CONFIG_NET_CLS_IND=y
-# CONFIG_NET_CLS_MATCHALL is not set
-# CONFIG_NET_CLS_ROUTE4 is not set
-# CONFIG_NET_CLS_RSVP is not set
-# CONFIG_NET_CLS_RSVP6 is not set
-# CONFIG_NET_CLS_TCINDEX is not set
-# CONFIG_NET_CLS_U32 is not set
-CONFIG_NET_CORE=y
-# CONFIG_NET_DEVLINK is not set
-# CONFIG_NET_DROP_MONITOR is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_NET_DSA_BCM_SF2 is not set
-# CONFIG_NET_DSA_LEGACY is not set
-# CONFIG_NET_DSA_LOOP is not set
-# CONFIG_NET_DSA_MT7530 is not set
-# CONFIG_NET_DSA_MV88E6060 is not set
-# CONFIG_NET_DSA_MV88E6123_61_65 is not set
-# CONFIG_NET_DSA_MV88E6131 is not set
-# CONFIG_NET_DSA_MV88E6171 is not set
-# CONFIG_NET_DSA_MV88E6352 is not set
-# CONFIG_NET_DSA_MV88E6XXX is not set
-# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
-# CONFIG_NET_DSA_QCA8K is not set
-# CONFIG_NET_DSA_REALTEK_SMI is not set
-# CONFIG_NET_DSA_SMSC_LAN9303_I2C is not set
-# CONFIG_NET_DSA_SMSC_LAN9303_MDIO is not set
-# CONFIG_NET_DSA_TAG_DSA is not set
-# CONFIG_NET_DSA_TAG_EDSA is not set
-# CONFIG_NET_DSA_VITESSE_VSC73XX is not set
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_EMATCH_CANID is not set
-# CONFIG_NET_EMATCH_CMP is not set
-# CONFIG_NET_EMATCH_IPT is not set
-# CONFIG_NET_EMATCH_META is not set
-# CONFIG_NET_EMATCH_NBYTE is not set
-CONFIG_NET_EMATCH_STACK=32
-# CONFIG_NET_EMATCH_TEXT is not set
-# CONFIG_NET_EMATCH_U32 is not set
-# CONFIG_NET_FAILOVER is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NET_FOU is not set
-# CONFIG_NET_FOU_IP_TUNNELS is not set
-# CONFIG_NET_IFE is not set
-# CONFIG_NET_IPGRE is not set
-CONFIG_NET_IPGRE_BROADCAST=y
-# CONFIG_NET_IPGRE_DEMUX is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPVTI is not set
-# CONFIG_NET_IP_TUNNEL is not set
-# CONFIG_NET_KEY is not set
-# CONFIG_NET_KEY_MIGRATE is not set
-# CONFIG_NET_L3_MASTER_DEV is not set
-# CONFIG_NET_MPLS_GSO is not set
-# CONFIG_NET_NCSI is not set
-# CONFIG_NET_NSH is not set
-# CONFIG_NET_PACKET_ENGINE is not set
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_NET_PTP_CLASSIFY is not set
-CONFIG_NET_RX_BUSY_POLL=y
-# CONFIG_NET_SB1000 is not set
-CONFIG_NET_SCHED=y
-# CONFIG_NET_SCH_ATM is not set
-# CONFIG_NET_SCH_CAKE is not set
-# CONFIG_NET_SCH_CBQ is not set
-# CONFIG_NET_SCH_CBS is not set
-# CONFIG_NET_SCH_CHOKE is not set
-# CONFIG_NET_SCH_CODEL is not set
-# CONFIG_NET_SCH_DEFAULT is not set
-# CONFIG_NET_SCH_DRR is not set
-# CONFIG_NET_SCH_DSMARK is not set
-# CONFIG_NET_SCH_ETF is not set
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_NET_SCH_FQ is not set
-CONFIG_NET_SCH_FQ_CODEL=y
-# CONFIG_NET_SCH_GRED is not set
-# CONFIG_NET_SCH_HFSC is not set
-# CONFIG_NET_SCH_HHF is not set
-# CONFIG_NET_SCH_HTB is not set
-# CONFIG_NET_SCH_INGRESS is not set
-# CONFIG_NET_SCH_MQPRIO is not set
-# CONFIG_NET_SCH_MULTIQ is not set
-# CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_PIE is not set
-# CONFIG_NET_SCH_PLUG is not set
-# CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_QFQ is not set
-# CONFIG_NET_SCH_RED is not set
-# CONFIG_NET_SCH_SFB is not set
-# CONFIG_NET_SCH_SFQ is not set
-# CONFIG_NET_SCH_SKBPRIO is not set
-# CONFIG_NET_SCH_TBF is not set
-# CONFIG_NET_SCH_TEQL is not set
-# CONFIG_NET_SCTPPROBE is not set
-# CONFIG_NET_SWITCHDEV is not set
-# CONFIG_NET_TCPPROBE is not set
-# CONFIG_NET_TEAM is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_NET_UDP_TUNNEL is not set
-CONFIG_NET_VENDOR_3COM=y
-CONFIG_NET_VENDOR_8390=y
-CONFIG_NET_VENDOR_ADAPTEC=y
-CONFIG_NET_VENDOR_AGERE=y
-CONFIG_NET_VENDOR_ALACRITECH=y
-CONFIG_NET_VENDOR_ALTEON=y
-CONFIG_NET_VENDOR_AMAZON=y
-CONFIG_NET_VENDOR_AMD=y
-CONFIG_NET_VENDOR_AQUANTIA=y
-CONFIG_NET_VENDOR_ARC=y
-CONFIG_NET_VENDOR_ATHEROS=y
-CONFIG_NET_VENDOR_AURORA=y
-CONFIG_NET_VENDOR_BROADCOM=y
-CONFIG_NET_VENDOR_BROCADE=y
-CONFIG_NET_VENDOR_CADENCE=y
-CONFIG_NET_VENDOR_CAVIUM=y
-CONFIG_NET_VENDOR_CHELSIO=y
-CONFIG_NET_VENDOR_CIRRUS=y
-CONFIG_NET_VENDOR_CISCO=y
-CONFIG_NET_VENDOR_CORTINA=y
-CONFIG_NET_VENDOR_DEC=y
-CONFIG_NET_VENDOR_DLINK=y
-CONFIG_NET_VENDOR_EMULEX=y
-CONFIG_NET_VENDOR_EXAR=y
-CONFIG_NET_VENDOR_EZCHIP=y
-CONFIG_NET_VENDOR_FARADAY=y
-CONFIG_NET_VENDOR_FREESCALE=y
-CONFIG_NET_VENDOR_FUJITSU=y
-CONFIG_NET_VENDOR_HISILICON=y
-CONFIG_NET_VENDOR_HP=y
-CONFIG_NET_VENDOR_HUAWEI=y
-CONFIG_NET_VENDOR_I825XX=y
-CONFIG_NET_VENDOR_IBM=y
-CONFIG_NET_VENDOR_INTEL=y
-CONFIG_NET_VENDOR_MARVELL=y
-CONFIG_NET_VENDOR_MELLANOX=y
-CONFIG_NET_VENDOR_MICREL=y
-CONFIG_NET_VENDOR_MICROCHIP=y
-CONFIG_NET_VENDOR_MICROSEMI=y
-CONFIG_NET_VENDOR_MYRI=y
-CONFIG_NET_VENDOR_NATSEMI=y
-CONFIG_NET_VENDOR_NETERION=y
-CONFIG_NET_VENDOR_NETRONOME=y
-CONFIG_NET_VENDOR_NI=y
-CONFIG_NET_VENDOR_NVIDIA=y
-CONFIG_NET_VENDOR_OKI=y
-CONFIG_NET_VENDOR_PACKET_ENGINES=y
-CONFIG_NET_VENDOR_QLOGIC=y
-CONFIG_NET_VENDOR_QUALCOMM=y
-CONFIG_NET_VENDOR_RDC=y
-CONFIG_NET_VENDOR_REALTEK=y
-CONFIG_NET_VENDOR_RENESAS=y
-CONFIG_NET_VENDOR_ROCKER=y
-CONFIG_NET_VENDOR_SAMSUNG=y
-CONFIG_NET_VENDOR_SEEQ=y
-CONFIG_NET_VENDOR_SILAN=y
-CONFIG_NET_VENDOR_SIS=y
-CONFIG_NET_VENDOR_SMSC=y
-CONFIG_NET_VENDOR_SOCIONEXT=y
-CONFIG_NET_VENDOR_SOLARFLARE=y
-CONFIG_NET_VENDOR_STMICRO=y
-CONFIG_NET_VENDOR_SUN=y
-CONFIG_NET_VENDOR_SYNOPSYS=y
-CONFIG_NET_VENDOR_TEHUTI=y
-CONFIG_NET_VENDOR_TI=y
-CONFIG_NET_VENDOR_TOSHIBA=y
-CONFIG_NET_VENDOR_VIA=y
-CONFIG_NET_VENDOR_WIZNET=y
-CONFIG_NET_VENDOR_XILINX=y
-CONFIG_NET_VENDOR_XIRCOM=y
-# CONFIG_NET_VRF is not set
-# CONFIG_NET_XGENE is not set
-CONFIG_NEW_LEDS=y
-# CONFIG_NFC is not set
-# CONFIG_NFP is not set
-# CONFIG_NFSD is not set
-# CONFIG_NFSD_V2_ACL is not set
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
-# CONFIG_NFS_ACL_SUPPORT is not set
-CONFIG_NFS_COMMON=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFS_FSCACHE is not set
-# CONFIG_NFS_SWAP is not set
-# CONFIG_NFS_V2 is not set
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_V4_1 is not set
-# CONFIG_NFTL is not set
-# CONFIG_NFT_BRIDGE_META is not set
-# CONFIG_NFT_BRIDGE_REJECT is not set
-# CONFIG_NFT_CONNLIMIT is not set
-# CONFIG_NFT_DUP_IPV4 is not set
-# CONFIG_NFT_DUP_IPV6 is not set
-# CONFIG_NFT_FIB_IPV4 is not set
-# CONFIG_NFT_FIB_IPV6 is not set
-# CONFIG_NFT_FIB_NETDEV is not set
-# CONFIG_NFT_FLOW_OFFLOAD is not set
-# CONFIG_NFT_OBJREF is not set
-# CONFIG_NFT_OSF is not set
-# CONFIG_NFT_RT is not set
-# CONFIG_NFT_SET_BITMAP is not set
-# CONFIG_NFT_SOCKET is not set
-# CONFIG_NFT_TPROXY is not set
-# CONFIG_NFT_TUNNEL is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NF_CONNTRACK_AMANDA is not set
-# CONFIG_NF_CONNTRACK_EVENTS is not set
-# CONFIG_NF_CONNTRACK_FTP is not set
-# CONFIG_NF_CONNTRACK_H323 is not set
-# CONFIG_NF_CONNTRACK_IPV4 is not set
-# CONFIG_NF_CONNTRACK_IPV6 is not set
-# CONFIG_NF_CONNTRACK_IRC is not set
-# CONFIG_NF_CONNTRACK_LABELS is not set
-# CONFIG_NF_CONNTRACK_MARK is not set
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-# CONFIG_NF_CONNTRACK_PPTP is not set
-CONFIG_NF_CONNTRACK_PROCFS=y
-# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
-# CONFIG_NF_CONNTRACK_SANE is not set
-# CONFIG_NF_CONNTRACK_SIP is not set
-# CONFIG_NF_CONNTRACK_SNMP is not set
-# CONFIG_NF_CONNTRACK_TFTP is not set
-# CONFIG_NF_CONNTRACK_TIMEOUT is not set
-# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
-# CONFIG_NF_CONNTRACK_ZONES is not set
-# CONFIG_NF_CT_NETLINK is not set
-# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
-# CONFIG_NF_CT_PROTO_DCCP is not set
-# CONFIG_NF_CT_PROTO_GRE is not set
-# CONFIG_NF_CT_PROTO_SCTP is not set
-# CONFIG_NF_CT_PROTO_UDPLITE is not set
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_NF_DUP_IPV4 is not set
-# CONFIG_NF_DUP_IPV6 is not set
-# CONFIG_NF_FLOW_TABLE is not set
-# CONFIG_NF_LOG_ARP is not set
-# CONFIG_NF_LOG_BRIDGE is not set
-# CONFIG_NF_LOG_IPV4 is not set
-# CONFIG_NF_LOG_NETDEV is not set
-# CONFIG_NF_NAT is not set
-# CONFIG_NF_NAT_AMANDA is not set
-# CONFIG_NF_NAT_FTP is not set
-# CONFIG_NF_NAT_H323 is not set
-# CONFIG_NF_NAT_IPV6 is not set
-# CONFIG_NF_NAT_IRC is not set
-CONFIG_NF_NAT_MASQUERADE_IPV4=y
-CONFIG_NF_NAT_MASQUERADE_IPV6=y
-# CONFIG_NF_NAT_NEEDED is not set
-# CONFIG_NF_NAT_PPTP is not set
-# CONFIG_NF_NAT_PROTO_GRE is not set
-# CONFIG_NF_NAT_SIP is not set
-# CONFIG_NF_NAT_SNMP_BASIC is not set
-# CONFIG_NF_NAT_TFTP is not set
-# CONFIG_NF_REJECT_IPV4 is not set
-# CONFIG_NF_REJECT_IPV6 is not set
-# CONFIG_NF_SOCKET_IPV4 is not set
-# CONFIG_NF_SOCKET_IPV6 is not set
-# CONFIG_NF_TABLES is not set
-CONFIG_NF_TABLES_ARP=y
-CONFIG_NF_TABLES_BRIDGE=y
-CONFIG_NF_TABLES_INET=y
-CONFIG_NF_TABLES_IPV4=y
-CONFIG_NF_TABLES_IPV6=y
-CONFIG_NF_TABLES_NETDEV=y
-# CONFIG_NF_TABLES_SET is not set
-# CONFIG_NF_TPROXY_IPV4 is not set
-# CONFIG_NF_TPROXY_IPV6 is not set
-# CONFIG_NI65 is not set
-# CONFIG_NI903X_WDT is not set
-# CONFIG_NIC7018_WDT is not set
-# CONFIG_NILFS2_FS is not set
-# CONFIG_NIU is not set
-CONFIG_NLATTR=y
-# CONFIG_NLMON is not set
-# CONFIG_NLM_XLP_BOARD is not set
-# CONFIG_NLM_XLR_BOARD is not set
-# CONFIG_NLS is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_MAC_CELTIC is not set
-# CONFIG_NLS_MAC_CENTEURO is not set
-# CONFIG_NLS_MAC_CROATIAN is not set
-# CONFIG_NLS_MAC_CYRILLIC is not set
-# CONFIG_NLS_MAC_GAELIC is not set
-# CONFIG_NLS_MAC_GREEK is not set
-# CONFIG_NLS_MAC_ICELAND is not set
-# CONFIG_NLS_MAC_INUIT is not set
-# CONFIG_NLS_MAC_ROMAN is not set
-# CONFIG_NLS_MAC_ROMANIAN is not set
-# CONFIG_NLS_MAC_TURKISH is not set
-# CONFIG_NLS_UTF8 is not set
-CONFIG_NMI_LOG_BUF_SHIFT=13
-# CONFIG_NOP_USB_XCEIV is not set
-# CONFIG_NORTEL_HERMES is not set
-# CONFIG_NOTIFIER_ERROR_INJECTION is not set
-# CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT is not set
-# CONFIG_NOZOMI is not set
-# CONFIG_NO_BOOTMEM is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_NO_HZ_FULL is not set
-# CONFIG_NO_HZ_IDLE is not set
-# CONFIG_NS83820 is not set
-# CONFIG_NTB is not set
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_FS is not set
-# CONFIG_NTFS_RW is not set
-# CONFIG_NTP_PPS is not set
-# CONFIG_NVM is not set
-# CONFIG_NVMEM is not set
-# CONFIG_NVMEM_BCM_OCOTP is not set
-# CONFIG_NVMEM_IMX_OCOTP is not set
-# CONFIG_NVME_FC is not set
-# CONFIG_NVME_TARGET is not set
-# CONFIG_NVRAM is not set
-# CONFIG_NV_TCO is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-# CONFIG_N_GSM is not set
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_OBS600 is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_OF_OVERLAY is not set
-# CONFIG_OF_UNITTEST is not set
-# CONFIG_OMAP2_DSS_DEBUG is not set
-# CONFIG_OMAP2_DSS_DEBUGFS is not set
-# CONFIG_OMAP2_DSS_SDI is not set
-# CONFIG_OMAP_OCP2SCP is not set
-# CONFIG_OMAP_USB2 is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_OPENVSWITCH is not set
-# CONFIG_OPROFILE is not set
-# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
-# CONFIG_OPT3001 is not set
-CONFIG_OPTIMIZE_INLINING=y
-# CONFIG_ORANGEFS_FS is not set
-# CONFIG_ORION_WATCHDOG is not set
-# CONFIG_OSF_PARTITION is not set
-CONFIG_OVERLAY_FS=y
-# CONFIG_OVERLAY_FS_INDEX is not set
-# CONFIG_OVERLAY_FS_METACOPY is not set
-CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
-# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
-CONFIG_OVERLAY_FS_XINO_AUTO=y
-# CONFIG_OWL_LOADER is not set
-# CONFIG_P54_COMMON is not set
-# CONFIG_PA12203001 is not set
-CONFIG_PACKET=y
-# CONFIG_PACKET_DIAG is not set
-# CONFIG_PAGE_EXTENSION is not set
-# CONFIG_PAGE_OWNER is not set
-# CONFIG_PAGE_POISONING is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_32KB is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PALMAS_GPADC is not set
-# CONFIG_PANASONIC_LAPTOP is not set
-# CONFIG_PANEL is not set
-CONFIG_PANIC_ON_OOPS=y
-CONFIG_PANIC_ON_OOPS_VALUE=1
-CONFIG_PANIC_TIMEOUT=1
-# CONFIG_PANTHERLORD_FF is not set
-# CONFIG_PARAVIRT is not set
-# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
-# CONFIG_PARPORT is not set
-# CONFIG_PARPORT_1284 is not set
-# CONFIG_PARPORT_AX88796 is not set
-# CONFIG_PARPORT_GSC is not set
-# CONFIG_PARPORT_PC is not set
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARASAN_CF is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_ATP867X is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CS5535 is not set
-# CONFIG_PATA_CS5536 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IMX is not set
-# CONFIG_PATA_ISAPNP is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OCTEON_CF is not set
-# CONFIG_PATA_OF_PLATFORM is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PCMCIA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_QDI is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RDC is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TOSHIBA is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_WINBOND_VLB is not set
-# CONFIG_PC104 is not set
-# CONFIG_PC300TOO is not set
-# CONFIG_PCCARD is not set
-# CONFIG_PCH_DMA is not set
-# CONFIG_PCH_GBE is not set
-# CONFIG_PCH_PHUB is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI200SYN is not set
-# CONFIG_PCIEAER_INJECT is not set
-# CONFIG_PCIEASPM is not set
-# CONFIG_PCIEPORTBUS is not set
-# CONFIG_PCIE_ALTERA is not set
-# CONFIG_PCIE_ARMADA_8K is not set
-# CONFIG_PCIE_CADENCE_HOST is not set
-# CONFIG_PCIE_DPC is not set
-# CONFIG_PCIE_DW_PLAT is not set
-# CONFIG_PCIE_DW_PLAT_HOST is not set
-# CONFIG_PCIE_ECRC is not set
-# CONFIG_PCIE_IPROC is not set
-# CONFIG_PCIE_KIRIN is not set
-# CONFIG_PCIE_PTM is not set
-# CONFIG_PCIE_XILINX is not set
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_PCI_ATMEL is not set
-# CONFIG_PCI_CNB20LE_QUIRK is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_DISABLE_COMMON_QUIRKS is not set
-# CONFIG_PCI_ENDPOINT is not set
-# CONFIG_PCI_ENDPOINT_TEST is not set
-# CONFIG_PCI_FTPCI100 is not set
-# CONFIG_PCI_HERMES is not set
-# CONFIG_PCI_HISI is not set
-# CONFIG_PCI_HOST_GENERIC is not set
-# CONFIG_PCI_HOST_THUNDER_ECAM is not set
-# CONFIG_PCI_HOST_THUNDER_PEM is not set
-# CONFIG_PCI_IOV is not set
-# CONFIG_PCI_LAYERSCAPE is not set
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_PASID is not set
-# CONFIG_PCI_PF_STUB is not set
-# CONFIG_PCI_PRI is not set
-CONFIG_PCI_QUIRKS=y
-# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCI_SW_SWITCHTEC is not set
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCI_V3_SEMI is not set
-# CONFIG_PCI_XGENE is not set
-# CONFIG_PCMCIA is not set
-# CONFIG_PCMCIA_3C574 is not set
-# CONFIG_PCMCIA_3C589 is not set
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_ATMEL is not set
-# CONFIG_PCMCIA_AXNET is not set
-# CONFIG_PCMCIA_DEBUG is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_FMVJ18X is not set
-# CONFIG_PCMCIA_HERMES is not set
-# CONFIG_PCMCIA_LOAD_CIS is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_NMCLAN is not set
-# CONFIG_PCMCIA_PCNET is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_PCMCIA_SMC91C92 is not set
-# CONFIG_PCMCIA_SPECTRUM is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_PCMCIA_XIRC2PS is not set
-# CONFIG_PCMCIA_XIRCOM is not set
-# CONFIG_PCNET32 is not set
-# CONFIG_PCSPKR_PLATFORM is not set
-# CONFIG_PD6729 is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_PERCPU_STATS is not set
-# CONFIG_PERCPU_TEST is not set
-# CONFIG_PERF_EVENTS is not set
-# CONFIG_PERF_EVENTS_AMD_POWER is not set
-# CONFIG_PERSISTENT_KEYRINGS is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_PHONET is not set
-# CONFIG_PHYLIB is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-# CONFIG_PHY_CPCAP_USB is not set
-# CONFIG_PHY_EXYNOS_DP_VIDEO is not set
-# CONFIG_PHY_EXYNOS_MIPI_VIDEO is not set
-# CONFIG_PHY_MAPPHONE_MDM6600 is not set
-# CONFIG_PHY_PXA_28NM_HSIC is not set
-# CONFIG_PHY_PXA_28NM_USB2 is not set
-# CONFIG_PHY_QCOM_DWC3 is not set
-# CONFIG_PHY_QCOM_USB_HS is not set
-# CONFIG_PHY_QCOM_USB_HSIC is not set
-# CONFIG_PHY_SAMSUNG_USB2 is not set
-# CONFIG_PHY_TUSB1210 is not set
-# CONFIG_PHY_XGENE is not set
-# CONFIG_PI433 is not set
-# CONFIG_PID_IN_CONTEXTIDR is not set
-# CONFIG_PID_NS is not set
-CONFIG_PINCONF=y
-# CONFIG_PINCTRL is not set
-# CONFIG_PINCTRL_AMD is not set
-# CONFIG_PINCTRL_AXP209 is not set
-# CONFIG_PINCTRL_CEDARFORK is not set
-# CONFIG_PINCTRL_EXYNOS is not set
-# CONFIG_PINCTRL_EXYNOS5440 is not set
-# CONFIG_PINCTRL_ICELAKE is not set
-# CONFIG_PINCTRL_MCP23S08 is not set
-# CONFIG_PINCTRL_MSM8X74 is not set
-CONFIG_PINCTRL_SINGLE=y
-# CONFIG_PINCTRL_SX150X is not set
-CONFIG_PINMUX=y
-# CONFIG_PKCS7_MESSAGE_PARSER is not set
-# CONFIG_PL320_MBOX is not set
-# CONFIG_PL330_DMA is not set
-# CONFIG_PLATFORM_MHU is not set
-# CONFIG_PLAT_SPEAR is not set
-# CONFIG_PLIP is not set
-CONFIG_PLUGIN_HOSTCC=""
-# CONFIG_PLX_HERMES is not set
-# CONFIG_PM is not set
-# CONFIG_PMBUS is not set
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMIC_ADP5520 is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PM_AUTOSLEEP is not set
-# CONFIG_PM_DEVFREQ is not set
-# CONFIG_PM_WAKELOCKS is not set
-# CONFIG_POSIX_MQUEUE is not set
-CONFIG_POSIX_TIMERS=y
-# CONFIG_POWERCAP is not set
-# CONFIG_POWER_AVS is not set
-# CONFIG_POWER_RESET is not set
-# CONFIG_POWER_RESET_BRCMKONA is not set
-# CONFIG_POWER_RESET_BRCMSTB is not set
-# CONFIG_POWER_RESET_GPIO is not set
-# CONFIG_POWER_RESET_GPIO_RESTART is not set
-# CONFIG_POWER_RESET_LTC2952 is not set
-# CONFIG_POWER_RESET_PIIX4_POWEROFF is not set
-# CONFIG_POWER_RESET_RESTART is not set
-# CONFIG_POWER_RESET_SYSCON is not set
-# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set
-# CONFIG_POWER_RESET_VERSATILE is not set
-# CONFIG_POWER_RESET_XGENE is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PPC4xx_GPIO is not set
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_256K_PAGES is not set
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_64K_PAGES is not set
-# CONFIG_PPC_DISABLE_WERROR is not set
-# CONFIG_PPC_EMULATED_STATS is not set
-# CONFIG_PPC_EPAPR_HV_BYTECHAN is not set
-# CONFIG_PPP is not set
-# CONFIG_PPPOATM is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_DEFLATE is not set
-CONFIG_PPP_FILTER=y
-# CONFIG_PPP_MPPE is not set
-CONFIG_PPP_MULTILINK=y
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PPS is not set
-# CONFIG_PPS_CLIENT_GPIO is not set
-# CONFIG_PPS_CLIENT_KTIMER is not set
-# CONFIG_PPS_CLIENT_LDISC is not set
-# CONFIG_PPS_CLIENT_PARPORT is not set
-# CONFIG_PPS_DEBUG is not set
-# CONFIG_PPTP is not set
-# CONFIG_PREEMPT is not set
-# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
-# CONFIG_PREEMPTIRQ_EVENTS is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_PRINTK=y
-CONFIG_PRINTK_NMI=y
-CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
-# CONFIG_PRINTK_TIME is not set
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_PRISM2_USB is not set
-# CONFIG_PRISM54 is not set
-# CONFIG_PROC_CHILDREN is not set
-CONFIG_PROC_FS=y
-# CONFIG_PROC_KCORE is not set
-# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_PROC_STRIPPED=y
-CONFIG_PROC_SYSCTL=y
-# CONFIG_PROC_VMCORE_DEVICE_DUMP is not set
-# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
-# CONFIG_PROFILING is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_PROVE_RCU is not set
-# CONFIG_PROVE_RCU_REPEATEDLY is not set
-# CONFIG_PSAMPLE is not set
-# CONFIG_PSB6970_PHY is not set
-# CONFIG_PSTORE is not set
-# CONFIG_PTP_1588_CLOCK is not set
-# CONFIG_PTP_1588_CLOCK_IXP46X is not set
-# CONFIG_PTP_1588_CLOCK_KVM is not set
-# CONFIG_PTP_1588_CLOCK_PCH is not set
-# CONFIG_PUBLIC_KEY_ALGO_RSA is not set
-# CONFIG_PWM is not set
-# CONFIG_PWM_FSL_FTM is not set
-# CONFIG_PWM_PCA9685 is not set
-CONFIG_PWRSEQ_EMMC=y
-# CONFIG_PWRSEQ_SD8787 is not set
-CONFIG_PWRSEQ_SIMPLE=y
-# CONFIG_QCA7000 is not set
-# CONFIG_QCA7000_SPI is not set
-# CONFIG_QCA7000_UART is not set
-# CONFIG_QCOM_EMAC is not set
-# CONFIG_QCOM_FALKOR_ERRATUM_1003 is not set
-# CONFIG_QCOM_FALKOR_ERRATUM_1009 is not set
-# CONFIG_QCOM_FALKOR_ERRATUM_E1041 is not set
-# CONFIG_QCOM_HIDMA is not set
-# CONFIG_QCOM_HIDMA_MGMT is not set
-# CONFIG_QCOM_QDF2400_ERRATUM_0065 is not set
-# CONFIG_QCOM_SPMI_IADC is not set
-# CONFIG_QCOM_SPMI_TEMP_ALARM is not set
-# CONFIG_QCOM_SPMI_VADC is not set
-# CONFIG_QED is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_QLCNIC is not set
-# CONFIG_QLGE is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_QNX6FS_FS is not set
-# CONFIG_QORIQ_CPUFREQ is not set
-# CONFIG_QORIQ_THERMAL is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_QUEUED_LOCK_STAT is not set
-# CONFIG_QUOTA is not set
-# CONFIG_QUOTACTL is not set
-# CONFIG_QUOTA_DEBUG is not set
-# CONFIG_R3964 is not set
-# CONFIG_R6040 is not set
-# CONFIG_R8169 is not set
-# CONFIG_R8188EU is not set
-# CONFIG_R8712U is not set
-# CONFIG_R8723AU is not set
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_RADIO_AZTECH is not set
-# CONFIG_RADIO_CADET is not set
-# CONFIG_RADIO_GEMTEK is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_RTRACK is not set
-# CONFIG_RADIO_RTRACK2 is not set
-# CONFIG_RADIO_SF16FMI is not set
-# CONFIG_RADIO_SF16FMR2 is not set
-# CONFIG_RADIO_TERRATEC is not set
-# CONFIG_RADIO_TRUST is not set
-# CONFIG_RADIO_TYPHOON is not set
-# CONFIG_RADIO_ZOLTRIX is not set
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_RALINK is not set
-# CONFIG_RANDOM32_SELFTEST is not set
-# CONFIG_RANDOM_TRUST_CPU is not set
-# CONFIG_RAPIDIO is not set
-# CONFIG_RAS is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_RBTREE_TEST is not set
-CONFIG_RCU_CPU_STALL_TIMEOUT=60
-# CONFIG_RCU_EQS_DEBUG is not set
-# CONFIG_RCU_EXPEDITE_BOOT is not set
-CONFIG_RCU_EXPERT=y
-CONFIG_RCU_FANOUT=32
-CONFIG_RCU_FANOUT_LEAF=16
-# CONFIG_RCU_FAST_NO_HZ is not set
-CONFIG_RCU_KTHREAD_PRIO=0
-# CONFIG_RCU_NOCB_CPU is not set
-# CONFIG_RCU_PERF_TEST is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-CONFIG_RCU_TORTURE_TEST_SLOW_INIT_DELAY=3
-# CONFIG_RCU_TRACE is not set
-# CONFIG_RC_ATI_REMOTE is not set
-# CONFIG_RC_CORE is not set
-# CONFIG_RC_DECODERS is not set
-# CONFIG_RC_LOOPBACK is not set
-# CONFIG_RC_MAP is not set
-# CONFIG_RDS is not set
-# CONFIG_RD_BZIP2 is not set
-# CONFIG_RD_GZIP is not set
-# CONFIG_RD_LZ4 is not set
-# CONFIG_RD_LZMA is not set
-# CONFIG_RD_LZO is not set
-# CONFIG_RD_XZ is not set
-# CONFIG_READABLE_ASM is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_REDWOOD is not set
-# CONFIG_REFCOUNT_FULL is not set
-# CONFIG_REGMAP is not set
-# CONFIG_REGMAP_I2C is not set
-# CONFIG_REGMAP_MMIO is not set
-# CONFIG_REGMAP_SPI is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_88PG86X is not set
-# CONFIG_REGULATOR_ACT8865 is not set
-# CONFIG_REGULATOR_AD5398 is not set
-# CONFIG_REGULATOR_ANATOP is not set
-# CONFIG_REGULATOR_DA9210 is not set
-# CONFIG_REGULATOR_DA9211 is not set
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FAN53555 is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_GPIO is not set
-# CONFIG_REGULATOR_ISL6271A is not set
-# CONFIG_REGULATOR_ISL9305 is not set
-# CONFIG_REGULATOR_LP3971 is not set
-# CONFIG_REGULATOR_LP3972 is not set
-# CONFIG_REGULATOR_LP872X is not set
-# CONFIG_REGULATOR_LP8755 is not set
-# CONFIG_REGULATOR_LTC3589 is not set
-# CONFIG_REGULATOR_LTC3676 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_MAX8649 is not set
-# CONFIG_REGULATOR_MAX8660 is not set
-# CONFIG_REGULATOR_MAX8952 is not set
-# CONFIG_REGULATOR_MAX8973 is not set
-# CONFIG_REGULATOR_MT6311 is not set
-# CONFIG_REGULATOR_PFUZE100 is not set
-# CONFIG_REGULATOR_PV88060 is not set
-# CONFIG_REGULATOR_PV88080 is not set
-# CONFIG_REGULATOR_PV88090 is not set
-# CONFIG_REGULATOR_PWM is not set
-# CONFIG_REGULATOR_SY8106A is not set
-# CONFIG_REGULATOR_TI_ABB is not set
-# CONFIG_REGULATOR_TPS51632 is not set
-# CONFIG_REGULATOR_TPS62360 is not set
-# CONFIG_REGULATOR_TPS65023 is not set
-# CONFIG_REGULATOR_TPS6507X is not set
-# CONFIG_REGULATOR_TPS65132 is not set
-# CONFIG_REGULATOR_TPS6524X is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_VCTRL is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_REISERFS_FS_POSIX_ACL is not set
-# CONFIG_REISERFS_FS_SECURITY is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_RELAY is not set
-# CONFIG_RELOCATABLE is not set
-# CONFIG_REMOTEPROC is not set
-# CONFIG_RENESAS_PHY is not set
-# CONFIG_RESET_ATH79 is not set
-# CONFIG_RESET_BERLIN is not set
-# CONFIG_RESET_CONTROLLER is not set
-# CONFIG_RESET_IMX7 is not set
-# CONFIG_RESET_LANTIQ is not set
-# CONFIG_RESET_LPC18XX is not set
-# CONFIG_RESET_MESON is not set
-# CONFIG_RESET_PISTACHIO is not set
-# CONFIG_RESET_SOCFPGA is not set
-# CONFIG_RESET_STM32 is not set
-# CONFIG_RESET_SUNXI is not set
-# CONFIG_RESET_TEGRA_BPMP is not set
-# CONFIG_RESET_TI_SYSCON is not set
-# CONFIG_RESET_ZYNQ is not set
-# CONFIG_RFD77402 is not set
-# CONFIG_RFD_FTL is not set
-CONFIG_RFKILL=y
-# CONFIG_RFKILL_FULL is not set
-# CONFIG_RFKILL_GPIO is not set
-# CONFIG_RFKILL_INPUT is not set
-# CONFIG_RFKILL_LEDS is not set
-# CONFIG_RFKILL_REGULATOR is not set
-# CONFIG_RING_BUFFER_BENCHMARK is not set
-# CONFIG_RING_BUFFER_STARTUP_TEST is not set
-# CONFIG_RMI4_CORE is not set
-# CONFIG_RMNET is not set
-# CONFIG_ROCKCHIP_PHY is not set
-# CONFIG_ROCKER is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_ROSE is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
-# CONFIG_RPMSG_VIRTIO is not set
-# CONFIG_RPR0521 is not set
-# CONFIG_RSEQ is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_RTC_DEBUG is not set
-# CONFIG_RTC_DRV_ABB5ZES3 is not set
-# CONFIG_RTC_DRV_ABX80X is not set
-# CONFIG_RTC_DRV_ARMADA38X is not set
-# CONFIG_RTC_DRV_AU1XXX is not set
-# CONFIG_RTC_DRV_BQ32K is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1302 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1307_CENTURY is not set
-# CONFIG_RTC_DRV_DS1307_HWMON is not set
-# CONFIG_RTC_DRV_DS1343 is not set
-# CONFIG_RTC_DRV_DS1347 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1685_FAMILY is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_DS2404 is not set
-# CONFIG_RTC_DRV_DS3232 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_EM3027 is not set
-# CONFIG_RTC_DRV_EP93XX is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_FTRTC010 is not set
-# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set
-# CONFIG_RTC_DRV_HYM8563 is not set
-# CONFIG_RTC_DRV_ISL12022 is not set
-# CONFIG_RTC_DRV_ISL12026 is not set
-# CONFIG_RTC_DRV_ISL12057 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_M41T93 is not set
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_MAX6916 is not set
-# CONFIG_RTC_DRV_MCP795 is not set
-# CONFIG_RTC_DRV_MOXART is not set
-# CONFIG_RTC_DRV_MPC5121 is not set
-# CONFIG_RTC_DRV_MSM6242 is not set
-# CONFIG_RTC_DRV_OMAP is not set
-# CONFIG_RTC_DRV_PCF2123 is not set
-# CONFIG_RTC_DRV_PCF2127 is not set
-# CONFIG_RTC_DRV_PCF85063 is not set
-# CONFIG_RTC_DRV_PCF8523 is not set
-# CONFIG_RTC_DRV_PCF85363 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_PL030 is not set
-# CONFIG_RTC_DRV_PL031 is not set
-# CONFIG_RTC_DRV_PS3 is not set
-# CONFIG_RTC_DRV_PT7C4338 is not set
-# CONFIG_RTC_DRV_R7301 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RP5C01 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_RTC7301 is not set
-# CONFIG_RTC_DRV_RV3029C2 is not set
-# CONFIG_RTC_DRV_RV8803 is not set
-# CONFIG_RTC_DRV_RX4581 is not set
-# CONFIG_RTC_DRV_RX6110 is not set
-# CONFIG_RTC_DRV_RX8010 is not set
-# CONFIG_RTC_DRV_RX8025 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_SNVS is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_SUN6I is not set
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_XGENE is not set
-# CONFIG_RTC_DRV_ZYNQMP is not set
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_NVMEM is not set
-CONFIG_RTC_SYSTOHC=y
-CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
-# CONFIG_RTL8180 is not set
-# CONFIG_RTL8187 is not set
-# CONFIG_RTL8192E is not set
-# CONFIG_RTL8192U is not set
-# CONFIG_RTL8306_PHY is not set
-# CONFIG_RTL8366RB_PHY is not set
-# CONFIG_RTL8366S_PHY is not set
-# CONFIG_RTL8366_SMI is not set
-# CONFIG_RTL8366_SMI_DEBUG_FS is not set
-# CONFIG_RTL8367B_PHY is not set
-# CONFIG_RTL8367_PHY is not set
-# CONFIG_RTLLIB is not set
-# CONFIG_RTL_CARDS is not set
-# CONFIG_RTS5208 is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_RUNTIME_DEBUG is not set
-CONFIG_RUNTIME_TESTING_MENU=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-CONFIG_RXKAD=y
-# CONFIG_S2IO is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_SAMSUNG_LAPTOP is not set
-# CONFIG_SATA_ACARD_AHCI is not set
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_AHCI_PLATFORM is not set
-# CONFIG_SATA_DWC is not set
-# CONFIG_SATA_FSL is not set
-# CONFIG_SATA_HIGHBANK is not set
-# CONFIG_SATA_INIC162X is not set
-CONFIG_SATA_MOBILE_LPM_POLICY=0
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_SATA_PMP is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_RCAR is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_SVW is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SBC_FITPC2_WATCHDOG is not set
-CONFIG_SBITMAP=y
-# CONFIG_SC92031 is not set
-# CONFIG_SCA3000 is not set
-# CONFIG_SCACHE_DEBUGFS is not set
-# CONFIG_SCC is not set
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_SCHED_AUTOGROUP is not set
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_SCHED_HRTICK=y
-# CONFIG_SCHED_MC is not set
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_SCHED_SMT is not set
-# CONFIG_SCHED_STACK_END_CHECK is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_SCR24X is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_3W_SAS is not set
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_AM53C974 is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_SCSI_BFA_FC is not set
-# CONFIG_SCSI_BNX2X_FCOE is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CHELSIO_FCOE is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_SCSI_CXGB4_ISCSI is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_ESAS2R is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_HISI_SAS is not set
-# CONFIG_SCSI_HPSA is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_ISCI is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_LOGGING is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-# CONFIG_SCSI_LPFC is not set
-CONFIG_SCSI_MOD=y
-# CONFIG_SCSI_MPT2SAS is not set
-# CONFIG_SCSI_MPT3SAS is not set
-# CONFIG_SCSI_MQ_DEFAULT is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_MVSAS_DEBUG is not set
-# CONFIG_SCSI_MVUMI is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_OSD_INITIATOR is not set
-# CONFIG_SCSI_PAS16 is not set
-# CONFIG_SCSI_PM8001 is not set
-# CONFIG_SCSI_PMCRAID is not set
-CONFIG_SCSI_PROC_FS=y
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-# CONFIG_SCSI_SMARTPQI is not set
-# CONFIG_SCSI_SNIC is not set
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_UFSHCD is not set
-# CONFIG_SCSI_ULTRASTOR is not set
-# CONFIG_SCSI_VIRTIO is not set
-# CONFIG_SCSI_WD719X is not set
-# CONFIG_SCx200_ACB is not set
-# CONFIG_SDIO_UART is not set
-# CONFIG_SD_ADC_MODULATOR is not set
-# CONFIG_SECCOMP is not set
-CONFIG_SECTION_MISMATCH_WARN_ONLY=y
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-CONFIG_SECURITY_DMESG_RESTRICT=y
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_ACPI_POWER is not set
-# CONFIG_SENSORS_AD7314 is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADC128D818 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM1275 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADS1015 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_ADS7871 is not set
-# CONFIG_SENSORS_ADT7310 is not set
-# CONFIG_SENSORS_ADT7410 is not set
-# CONFIG_SENSORS_ADT7411 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_AMC6821 is not set
-# CONFIG_SENSORS_APDS990X is not set
-# CONFIG_SENSORS_APPLESMC is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ASC7621 is not set
-# CONFIG_SENSORS_ASPEED is not set
-# CONFIG_SENSORS_ATK0110 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_BH1770 is not set
-# CONFIG_SENSORS_BH1780 is not set
-# CONFIG_SENSORS_CORETEMP is not set
-# CONFIG_SENSORS_DELL_SMM is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_DS620 is not set
-# CONFIG_SENSORS_EMC1403 is not set
-# CONFIG_SENSORS_EMC2103 is not set
-# CONFIG_SENSORS_EMC6W201 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_FAM15H_POWER is not set
-# CONFIG_SENSORS_FSCHMD is not set
-# CONFIG_SENSORS_FTSTEUTATES is not set
-# CONFIG_SENSORS_G760A is not set
-# CONFIG_SENSORS_G762 is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_GPIO_FAN is not set
-# CONFIG_SENSORS_GSC is not set
-# CONFIG_SENSORS_HDAPS is not set
-# CONFIG_SENSORS_HIH6130 is not set
-# CONFIG_SENSORS_HMC5843 is not set
-# CONFIG_SENSORS_HMC5843_I2C is not set
-# CONFIG_SENSORS_HMC5843_SPI is not set
-# CONFIG_SENSORS_HTU21 is not set
-# CONFIG_SENSORS_I5500 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_IBM_CFFPS is not set
-# CONFIG_SENSORS_IIO_HWMON is not set
-# CONFIG_SENSORS_INA209 is not set
-# CONFIG_SENSORS_INA2XX is not set
-# CONFIG_SENSORS_INA3221 is not set
-# CONFIG_SENSORS_IR35221 is not set
-# CONFIG_SENSORS_ISL29018 is not set
-# CONFIG_SENSORS_ISL29028 is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_JC42 is not set
-# CONFIG_SENSORS_K10TEMP is not set
-# CONFIG_SENSORS_K8TEMP is not set
-# CONFIG_SENSORS_LINEAGE is not set
-# CONFIG_SENSORS_LIS3LV02D is not set
-# CONFIG_SENSORS_LIS3_I2C is not set
-# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_SENSORS_LM25066 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM73 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LM95234 is not set
-# CONFIG_SENSORS_LM95241 is not set
-# CONFIG_SENSORS_LM95245 is not set
-# CONFIG_SENSORS_LTC2945 is not set
-# CONFIG_SENSORS_LTC2978 is not set
-# CONFIG_SENSORS_LTC2990 is not set
-# CONFIG_SENSORS_LTC3815 is not set
-# CONFIG_SENSORS_LTC4151 is not set
-# CONFIG_SENSORS_LTC4215 is not set
-# CONFIG_SENSORS_LTC4222 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_LTC4260 is not set
-# CONFIG_SENSORS_LTC4261 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX16064 is not set
-# CONFIG_SENSORS_MAX16065 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX1668 is not set
-# CONFIG_SENSORS_MAX197 is not set
-# CONFIG_SENSORS_MAX20751 is not set
-# CONFIG_SENSORS_MAX31722 is not set
-# CONFIG_SENSORS_MAX31785 is not set
-# CONFIG_SENSORS_MAX31790 is not set
-# CONFIG_SENSORS_MAX34440 is not set
-# CONFIG_SENSORS_MAX6621 is not set
-# CONFIG_SENSORS_MAX6639 is not set
-# CONFIG_SENSORS_MAX6642 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_MAX6697 is not set
-# CONFIG_SENSORS_MAX8688 is not set
-# CONFIG_SENSORS_MCP3021 is not set
-# CONFIG_SENSORS_NCT6683 is not set
-# CONFIG_SENSORS_NCT6775 is not set
-# CONFIG_SENSORS_NCT7802 is not set
-# CONFIG_SENSORS_NCT7904 is not set
-# CONFIG_SENSORS_NPCM7XX is not set
-# CONFIG_SENSORS_NSA320 is not set
-# CONFIG_SENSORS_NTC_THERMISTOR is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_PMBUS is not set
-# CONFIG_SENSORS_POWR1220 is not set
-# CONFIG_SENSORS_PWM_FAN is not set
-# CONFIG_SENSORS_SCH5627 is not set
-# CONFIG_SENSORS_SCH5636 is not set
-# CONFIG_SENSORS_SCH56XX_COMMON is not set
-# CONFIG_SENSORS_SHT15 is not set
-# CONFIG_SENSORS_SHT21 is not set
-# CONFIG_SENSORS_SHT3x is not set
-# CONFIG_SENSORS_SHTC1 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMM665 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_STTS751 is not set
-# CONFIG_SENSORS_TC654 is not set
-# CONFIG_SENSORS_TC74 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TMP102 is not set
-# CONFIG_SENSORS_TMP103 is not set
-# CONFIG_SENSORS_TMP108 is not set
-# CONFIG_SENSORS_TMP401 is not set
-# CONFIG_SENSORS_TMP421 is not set
-# CONFIG_SENSORS_TPS40422 is not set
-# CONFIG_SENSORS_TPS53679 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_SENSORS_TSL2563 is not set
-# CONFIG_SENSORS_UCD9000 is not set
-# CONFIG_SENSORS_UCD9200 is not set
-# CONFIG_SENSORS_VEXPRESS is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VIA_CPUTEMP is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83773G is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83795 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_XGENE is not set
-# CONFIG_SENSORS_ZL6100 is not set
-CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_ACCENT is not set
-# CONFIG_SERIAL_8250_ASPEED_VUART is not set
-# CONFIG_SERIAL_8250_BOCA is not set
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_CS is not set
-# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-CONFIG_SERIAL_8250_DMA=y
-# CONFIG_SERIAL_8250_DW is not set
-# CONFIG_SERIAL_8250_EM is not set
-# CONFIG_SERIAL_8250_EXAR is not set
-# CONFIG_SERIAL_8250_EXAR_ST16C554 is not set
-# CONFIG_SERIAL_8250_EXTENDED is not set
-# CONFIG_SERIAL_8250_FINTEK is not set
-# CONFIG_SERIAL_8250_FOURPORT is not set
-# CONFIG_SERIAL_8250_HUB6 is not set
-# CONFIG_SERIAL_8250_INGENIC is not set
-# CONFIG_SERIAL_8250_LPSS is not set
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
-# CONFIG_SERIAL_8250_MID is not set
-# CONFIG_SERIAL_8250_MOXA is not set
-CONFIG_SERIAL_8250_NR_UARTS=2
-# CONFIG_SERIAL_8250_PCI is not set
-# CONFIG_SERIAL_8250_RSA is not set
-# CONFIG_SERIAL_8250_RT288X is not set
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-# CONFIG_SERIAL_ALTERA_JTAGUART is not set
-# CONFIG_SERIAL_ALTERA_UART is not set
-# CONFIG_SERIAL_AMBA_PL010 is not set
-# CONFIG_SERIAL_ARC is not set
-# CONFIG_SERIAL_BCM63XX is not set
-# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_DEV_BUS is not set
-CONFIG_SERIAL_EARLYCON=y
-# CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST is not set
-# CONFIG_SERIAL_FSL_LPUART is not set
-# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
-# CONFIG_SERIAL_IFX6X60 is not set
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_MAX3100 is not set
-# CONFIG_SERIAL_MAX310X is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set
-# CONFIG_SERIAL_PCH_UART is not set
-# CONFIG_SERIAL_RP2 is not set
-# CONFIG_SERIAL_SC16IS7XX is not set
-# CONFIG_SERIAL_SCCNXP is not set
-# CONFIG_SERIAL_SH_SCI is not set
-# CONFIG_SERIAL_STM32 is not set
-# CONFIG_SERIAL_ST_ASC is not set
-# CONFIG_SERIAL_TIMBERDALE is not set
-# CONFIG_SERIAL_UARTLITE is not set
-# CONFIG_SERIAL_XILINX_PS_UART is not set
-# CONFIG_SERIO is not set
-# CONFIG_SERIO_ALTERA_PS2 is not set
-# CONFIG_SERIO_AMBAKMI is not set
-# CONFIG_SERIO_APBPS2 is not set
-# CONFIG_SERIO_ARC_PS2 is not set
-# CONFIG_SERIO_CT82C710 is not set
-# CONFIG_SERIO_GPIO_PS2 is not set
-# CONFIG_SERIO_I8042 is not set
-# CONFIG_SERIO_LIBPS2 is not set
-# CONFIG_SERIO_PARKBD is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_PS2MULT is not set
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_SUN4I_PS2 is not set
-# CONFIG_SFC is not set
-# CONFIG_SFC_FALCON is not set
-# CONFIG_SFI is not set
-# CONFIG_SFP is not set
-# CONFIG_SGETMASK_SYSCALL is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_SG_POOL is not set
-# CONFIG_SG_SPLIT is not set
-CONFIG_SHMEM=y
-# CONFIG_SH_ETH is not set
-# CONFIG_SH_TIMER_CMT is not set
-# CONFIG_SH_TIMER_MTU2 is not set
-# CONFIG_SH_TIMER_TMU is not set
-# CONFIG_SI1133 is not set
-# CONFIG_SI1145 is not set
-# CONFIG_SI7005 is not set
-# CONFIG_SI7020 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-CONFIG_SIGNALFD=y
-# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set
-# CONFIG_SIMPLE_GPIO is not set
-# CONFIG_SIMPLE_PM_BUS is not set
-# CONFIG_SIOX is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SKY2_DEBUG is not set
-# CONFIG_SLAB is not set
-CONFIG_SLABINFO=y
-# CONFIG_SLAB_FREELIST_HARDENED is not set
-# CONFIG_SLAB_FREELIST_RANDOM is not set
-CONFIG_SLAB_MERGE_DEFAULT=y
-# CONFIG_SLHC is not set
-# CONFIG_SLICOSS is not set
-# CONFIG_SLIMBUS is not set
-# CONFIG_SLIP is not set
-# CONFIG_SLOB is not set
-CONFIG_SLUB=y
-CONFIG_SLUB_CPU_PARTIAL=y
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_MEMCG_SYSFS_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_SMARTJOYPLUS_FF is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMC9194 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_SMP is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_SM_FTL is not set
-# CONFIG_SND is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-# CONFIG_SND_AD1816A is not set
-# CONFIG_SND_AD1848 is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ADLIB is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ALOOP is not set
-# CONFIG_SND_ALS100 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_ASIHPI is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_ATMEL_AC97C is not set
-# CONFIG_SND_ATMEL_SOC is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AUDIO_GRAPH_CARD is not set
-# CONFIG_SND_AUDIO_GRAPH_SCU_CARD is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT2320 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BCD2000 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMI8330 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_CS4231 is not set
-# CONFIG_SND_CS4236 is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5530 is not set
-# CONFIG_SND_CS5535AUDIO is not set
-# CONFIG_SND_CTXFI is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_DEBUG is not set
-# CONFIG_SND_DESIGNWARE_I2S is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_EDMA_SOC is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1688 is not set
-# CONFIG_SND_ES18XX is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FIREWIRE is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_GUSCLASSIC is not set
-# CONFIG_SND_GUSEXTREME is not set
-# CONFIG_SND_GUSMAX is not set
-# CONFIG_SND_HDA_INTEL is not set
-CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
-CONFIG_SND_HDA_PREALLOC_SIZE=64
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_HWDEP is not set
-# CONFIG_SND_I2S_HI6210_I2S is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_INDIGODJX is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGOIOX is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_INTERWAVE is not set
-# CONFIG_SND_INTERWAVE_STB is not set
-# CONFIG_SND_ISA is not set
-# CONFIG_SND_KIRKWOOD_SOC is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_LOLA is not set
-# CONFIG_SND_LX6464ES is not set
-# CONFIG_SND_MAESTRO3 is not set
-CONFIG_SND_MAX_CARDS=16
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_MIPS is not set
-# CONFIG_SND_MIRO is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MPC52xx_SOC_EFIKA is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_MTS64 is not set
-# CONFIG_SND_MXS_SOC is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_OPL3SA2 is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_OPTI92X_AD1848 is not set
-# CONFIG_SND_OPTI92X_CS4231 is not set
-# CONFIG_SND_OPTI93X is not set
-CONFIG_SND_OSSEMUL=y
-# CONFIG_SND_OXYGEN is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_PCM is not set
-# CONFIG_SND_PCMCIA is not set
-# CONFIG_SND_PCM_OSS is not set
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_PCM_TIMER is not set
-# CONFIG_SND_PCM_XRUN_DEBUG is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_PDAUDIOCF is not set
-# CONFIG_SND_PORTMAN2X4 is not set
-# CONFIG_SND_POWERPC_SOC is not set
-# CONFIG_SND_PPC is not set
-CONFIG_SND_PROC_FS=y
-# CONFIG_SND_RAWMIDI is not set
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_RTCTIMER is not set
-# CONFIG_SND_SB16 is not set
-# CONFIG_SND_SB8 is not set
-# CONFIG_SND_SBAWE is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-# CONFIG_SND_SE6X is not set
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_SIMPLE_CARD is not set
-# CONFIG_SND_SIMPLE_SCU_CARD is not set
-# CONFIG_SND_SIS7019 is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SND_SOC_AC97_CODEC is not set
-# CONFIG_SND_SOC_ADAU1701 is not set
-# CONFIG_SND_SOC_ADAU1761_I2C is not set
-# CONFIG_SND_SOC_ADAU1761_SPI is not set
-# CONFIG_SND_SOC_ADAU7002 is not set
-# CONFIG_SND_SOC_AK4104 is not set
-# CONFIG_SND_SOC_AK4458 is not set
-# CONFIG_SND_SOC_AK4554 is not set
-# CONFIG_SND_SOC_AK4613 is not set
-# CONFIG_SND_SOC_AK4642 is not set
-# CONFIG_SND_SOC_AK5386 is not set
-# CONFIG_SND_SOC_AK5558 is not set
-# CONFIG_SND_SOC_ALC5623 is not set
-# CONFIG_SND_SOC_AMD_ACP is not set
-# CONFIG_SND_SOC_AU1XAUDIO is not set
-# CONFIG_SND_SOC_AU1XPSC is not set
-# CONFIG_SND_SOC_BD28623 is not set
-# CONFIG_SND_SOC_BT_SCO is not set
-# CONFIG_SND_SOC_CS35L32 is not set
-# CONFIG_SND_SOC_CS35L33 is not set
-# CONFIG_SND_SOC_CS35L34 is not set
-# CONFIG_SND_SOC_CS35L35 is not set
-# CONFIG_SND_SOC_CS4265 is not set
-# CONFIG_SND_SOC_CS4270 is not set
-# CONFIG_SND_SOC_CS4271 is not set
-# CONFIG_SND_SOC_CS4271_I2C is not set
-# CONFIG_SND_SOC_CS4271_SPI is not set
-# CONFIG_SND_SOC_CS42L42 is not set
-# CONFIG_SND_SOC_CS42L51_I2C is not set
-# CONFIG_SND_SOC_CS42L52 is not set
-# CONFIG_SND_SOC_CS42L56 is not set
-# CONFIG_SND_SOC_CS42L73 is not set
-# CONFIG_SND_SOC_CS42XX8_I2C is not set
-# CONFIG_SND_SOC_CS43130 is not set
-# CONFIG_SND_SOC_CS4349 is not set
-# CONFIG_SND_SOC_CS53L30 is not set
-# CONFIG_SND_SOC_DIO2125 is not set
-# CONFIG_SND_SOC_ES7134 is not set
-# CONFIG_SND_SOC_ES7241 is not set
-# CONFIG_SND_SOC_ES8316 is not set
-# CONFIG_SND_SOC_ES8328 is not set
-# CONFIG_SND_SOC_ES8328_I2C is not set
-# CONFIG_SND_SOC_ES8328_SPI is not set
-# CONFIG_SND_SOC_EUKREA_TLV320 is not set
-# CONFIG_SND_SOC_FSL_ASOC_CARD is not set
-# CONFIG_SND_SOC_FSL_ASRC is not set
-# CONFIG_SND_SOC_FSL_ESAI is not set
-# CONFIG_SND_SOC_FSL_SAI is not set
-# CONFIG_SND_SOC_FSL_SPDIF is not set
-# CONFIG_SND_SOC_FSL_SSI is not set
-# CONFIG_SND_SOC_GTM601 is not set
-# CONFIG_SND_SOC_ICS43432 is not set
-# CONFIG_SND_SOC_IMG is not set
-# CONFIG_SND_SOC_IMX_AUDMUX is not set
-# CONFIG_SND_SOC_IMX_ES8328 is not set
-# CONFIG_SND_SOC_IMX_SPDIF is not set
-# CONFIG_SND_SOC_IMX_WM8962 is not set
-# CONFIG_SND_SOC_INNO_RK3036 is not set
-# CONFIG_SND_SOC_INTEL_BAYTRAIL is not set
-# CONFIG_SND_SOC_INTEL_BDW_RT5677_MACH is not set
-# CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH is not set
-# CONFIG_SND_SOC_INTEL_BXT_RT298_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYT_CHT_DA7213_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYT_CHT_ES8316_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYT_MAX98090_MACH is not set
-# CONFIG_SND_SOC_INTEL_BYT_RT5640_MACH is not set
-# CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH is not set
-# CONFIG_SND_SOC_INTEL_CHT_BSW_NAU8824_MACH is not set
-# CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH is not set
-# CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH is not set
-# CONFIG_SND_SOC_INTEL_HASWELL is not set
-# CONFIG_SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH is not set
-# CONFIG_SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH is not set
-# CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH is not set
-# CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH is not set
-# CONFIG_SND_SOC_INTEL_SKL_RT286_MACH is not set
-# CONFIG_SND_SOC_INTEL_SKYLAKE is not set
-# CONFIG_SND_SOC_INTEL_SST is not set
-CONFIG_SND_SOC_INTEL_SST_TOPLEVEL=y
-# CONFIG_SND_SOC_MAX9759 is not set
-# CONFIG_SND_SOC_MAX98373 is not set
-# CONFIG_SND_SOC_MAX98504 is not set
-# CONFIG_SND_SOC_MAX9860 is not set
-# CONFIG_SND_SOC_MAX9867 is not set
-# CONFIG_SND_SOC_MAX98927 is not set
-# CONFIG_SND_SOC_MEDIATEK is not set
-# CONFIG_SND_SOC_MPC5200_AC97 is not set
-# CONFIG_SND_SOC_MPC5200_I2S is not set
-# CONFIG_SND_SOC_MSM8916_WCD_ANALOG is not set
-# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set
-# CONFIG_SND_SOC_MT2701 is not set
-# CONFIG_SND_SOC_MT6351 is not set
-# CONFIG_SND_SOC_MT8173 is not set
-# CONFIG_SND_SOC_NAU8540 is not set
-# CONFIG_SND_SOC_NAU8810 is not set
-# CONFIG_SND_SOC_NAU8824 is not set
-# CONFIG_SND_SOC_PCM1681 is not set
-# CONFIG_SND_SOC_PCM1789_I2C is not set
-# CONFIG_SND_SOC_PCM1792A is not set
-# CONFIG_SND_SOC_PCM179X_I2C is not set
-# CONFIG_SND_SOC_PCM179X_SPI is not set
-# CONFIG_SND_SOC_PCM186X_I2C is not set
-# CONFIG_SND_SOC_PCM186X_SPI is not set
-# CONFIG_SND_SOC_PCM3168A_I2C is not set
-# CONFIG_SND_SOC_PCM3168A_SPI is not set
-# CONFIG_SND_SOC_PCM512x_I2C is not set
-# CONFIG_SND_SOC_PCM512x_SPI is not set
-# CONFIG_SND_SOC_QCOM is not set
-# CONFIG_SND_SOC_RT5616 is not set
-# CONFIG_SND_SOC_RT5631 is not set
-# CONFIG_SND_SOC_RT5677_SPI is not set
-# CONFIG_SND_SOC_SGTL5000 is not set
-# CONFIG_SND_SOC_SIMPLE_AMPLIFIER is not set
-# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set
-# CONFIG_SND_SOC_SPDIF is not set
-# CONFIG_SND_SOC_SSM2305 is not set
-# CONFIG_SND_SOC_SSM2602_I2C is not set
-# CONFIG_SND_SOC_SSM2602_SPI is not set
-# CONFIG_SND_SOC_SSM4567 is not set
-# CONFIG_SND_SOC_STA32X is not set
-# CONFIG_SND_SOC_STA350 is not set
-# CONFIG_SND_SOC_STI_SAS is not set
-# CONFIG_SND_SOC_TAS2552 is not set
-# CONFIG_SND_SOC_TAS5086 is not set
-# CONFIG_SND_SOC_TAS571X is not set
-# CONFIG_SND_SOC_TAS5720 is not set
-# CONFIG_SND_SOC_TAS6424 is not set
-# CONFIG_SND_SOC_TDA7419 is not set
-# CONFIG_SND_SOC_TFA9879 is not set
-# CONFIG_SND_SOC_TLV320AIC23_I2C is not set
-# CONFIG_SND_SOC_TLV320AIC23_SPI is not set
-# CONFIG_SND_SOC_TLV320AIC31XX is not set
-# CONFIG_SND_SOC_TLV320AIC32X4_I2C is not set
-# CONFIG_SND_SOC_TLV320AIC32X4_SPI is not set
-# CONFIG_SND_SOC_TLV320AIC3X is not set
-# CONFIG_SND_SOC_TPA6130A2 is not set
-# CONFIG_SND_SOC_TS3A227E is not set
-# CONFIG_SND_SOC_TSCS42XX is not set
-# CONFIG_SND_SOC_TSCS454 is not set
-# CONFIG_SND_SOC_WM8510 is not set
-# CONFIG_SND_SOC_WM8523 is not set
-# CONFIG_SND_SOC_WM8524 is not set
-# CONFIG_SND_SOC_WM8580 is not set
-# CONFIG_SND_SOC_WM8711 is not set
-# CONFIG_SND_SOC_WM8728 is not set
-# CONFIG_SND_SOC_WM8731 is not set
-# CONFIG_SND_SOC_WM8737 is not set
-# CONFIG_SND_SOC_WM8741 is not set
-# CONFIG_SND_SOC_WM8750 is not set
-# CONFIG_SND_SOC_WM8753 is not set
-# CONFIG_SND_SOC_WM8770 is not set
-# CONFIG_SND_SOC_WM8776 is not set
-# CONFIG_SND_SOC_WM8782 is not set
-# CONFIG_SND_SOC_WM8804_I2C is not set
-# CONFIG_SND_SOC_WM8804_SPI is not set
-# CONFIG_SND_SOC_WM8903 is not set
-# CONFIG_SND_SOC_WM8960 is not set
-# CONFIG_SND_SOC_WM8962 is not set
-# CONFIG_SND_SOC_WM8974 is not set
-# CONFIG_SND_SOC_WM8978 is not set
-# CONFIG_SND_SOC_WM8985 is not set
-# CONFIG_SND_SOC_XTFPGA_I2S is not set
-# CONFIG_SND_SOC_ZX_AUD96P22 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_SSCAPE is not set
-# CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_ACPI is not set
-# CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_PCI is not set
-# CONFIG_SND_SUN4I_CODEC is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_TIMER is not set
-# CONFIG_SND_TRIDENT is not set
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_6FIRE is not set
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_USB_HIFACE is not set
-# CONFIG_SND_USB_POD is not set
-# CONFIG_SND_USB_PODHD is not set
-# CONFIG_SND_USB_TONEPORT is not set
-# CONFIG_SND_USB_UA101 is not set
-# CONFIG_SND_USB_US122L is not set
-# CONFIG_SND_USB_USX2Y is not set
-# CONFIG_SND_USB_VARIAX is not set
-# CONFIG_SND_VERBOSE_PRINTK is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_WAVEFRONT is not set
-CONFIG_SND_X86=y
-# CONFIG_SND_XEN_FRONTEND is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_SOCIONEXT_SYNQUACER_PREITS is not set
-# CONFIG_SOCK_CGROUP_DATA is not set
-# CONFIG_SOC_AM33XX is not set
-# CONFIG_SOC_AM43XX is not set
-# CONFIG_SOC_BRCMSTB is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_SOC_DRA7XX is not set
-# CONFIG_SOC_HAS_OMAP2_SDRC is not set
-# CONFIG_SOC_OMAP5 is not set
-# CONFIG_SOC_TI is not set
-# CONFIG_SOFTLOCKUP_DETECTOR is not set
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_SONYPI is not set
-# CONFIG_SONY_LAPTOP is not set
-# CONFIG_SOUND is not set
-# CONFIG_SOUNDWIRE is not set
-# CONFIG_SOUND_OSS_CORE is not set
-# CONFIG_SOUND_PRIME is not set
-# CONFIG_SP5100_TCO is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-# CONFIG_SPARSE_IRQ is not set
-# CONFIG_SPARSE_RCU_POINTER is not set
-# CONFIG_SPEAKUP is not set
-# CONFIG_SPI is not set
-# CONFIG_SPINLOCK_TEST is not set
-# CONFIG_SPI_ALTERA is not set
-# CONFIG_SPI_AU1550 is not set
-# CONFIG_SPI_AXI_SPI_ENGINE is not set
-# CONFIG_SPI_BCM2835 is not set
-# CONFIG_SPI_BCM_QSPI is not set
-# CONFIG_SPI_BITBANG is not set
-# CONFIG_SPI_BUTTERFLY is not set
-# CONFIG_SPI_CADENCE is not set
-# CONFIG_SPI_CADENCE_QUADSPI is not set
-# CONFIG_SPI_DEBUG is not set
-# CONFIG_SPI_DESIGNWARE is not set
-# CONFIG_SPI_FSL_DSPI is not set
-# CONFIG_SPI_FSL_ESPI is not set
-# CONFIG_SPI_FSL_SPI is not set
-# CONFIG_SPI_GPIO is not set
-# CONFIG_SPI_GPIO_OLD is not set
-# CONFIG_SPI_IMG_SPFI is not set
-# CONFIG_SPI_LM70_LLP is not set
-# CONFIG_SPI_LOOPBACK_TEST is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_SPI_MEM is not set
-# CONFIG_SPI_MPC52xx is not set
-# CONFIG_SPI_MPC52xx_PSC is not set
-# CONFIG_SPI_OCTEON is not set
-# CONFIG_SPI_OC_TINY is not set
-# CONFIG_SPI_ORION is not set
-# CONFIG_SPI_PL022 is not set
-# CONFIG_SPI_PPC4xx is not set
-# CONFIG_SPI_PXA2XX is not set
-# CONFIG_SPI_PXA2XX_PCI is not set
-# CONFIG_SPI_ROCKCHIP is not set
-# CONFIG_SPI_S3C64XX is not set
-# CONFIG_SPI_SC18IS602 is not set
-# CONFIG_SPI_SLAVE is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_THUNDERX is not set
-# CONFIG_SPI_TI_QSPI is not set
-# CONFIG_SPI_TLE62X0 is not set
-# CONFIG_SPI_TOPCLIFF_PCH is not set
-# CONFIG_SPI_XCOMM is not set
-# CONFIG_SPI_XILINX is not set
-# CONFIG_SPI_XWAY is not set
-# CONFIG_SPI_ZYNQMP_GQSPI is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_SPMI is not set
-CONFIG_SQUASHFS=y
-# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
-# CONFIG_SQUASHFS_DECOMP_MULTI is not set
-CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
-# CONFIG_SQUASHFS_DECOMP_SINGLE is not set
-CONFIG_SQUASHFS_EMBEDDED=y
-# CONFIG_SQUASHFS_FILE_CACHE is not set
-CONFIG_SQUASHFS_FILE_DIRECT=y
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_SQUASHFS_LZ4 is not set
-# CONFIG_SQUASHFS_LZO is not set
-# CONFIG_SQUASHFS_XATTR is not set
-CONFIG_SQUASHFS_XZ=y
-# CONFIG_SQUASHFS_ZLIB is not set
-# CONFIG_SQUASHFS_ZSTD is not set
-# CONFIG_SRAM is not set
-# CONFIG_SRF04 is not set
-# CONFIG_SRF08 is not set
-# CONFIG_SSB is not set
-# CONFIG_SSB_DEBUG is not set
-# CONFIG_SSB_DRIVER_GPIO is not set
-# CONFIG_SSB_HOST_SOC is not set
-# CONFIG_SSB_PCMCIAHOST is not set
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB_SDIOHOST is not set
-# CONFIG_SSB_SILENT is not set
-# CONFIG_SSFDC is not set
-# CONFIG_STACKPROTECTOR is not set
-# CONFIG_STACKPROTECTOR_STRONG is not set
-# CONFIG_STACKTRACE is not set
-CONFIG_STACKTRACE_SUPPORT=y
-# CONFIG_STACK_TRACER is not set
-# CONFIG_STACK_VALIDATION is not set
-CONFIG_STAGING=y
-# CONFIG_STAGING_BOARD is not set
-# CONFIG_STAGING_GASKET_FRAMEWORK is not set
-# CONFIG_STAGING_MEDIA is not set
-CONFIG_STANDALONE=y
-# CONFIG_STATIC_KEYS_SELFTEST is not set
-# CONFIG_STATIC_USERMODEHELPER is not set
-CONFIG_STDBINUTILS=y
-# CONFIG_STE10XP is not set
-# CONFIG_STE_MODEM_RPROC is not set
-# CONFIG_STK3310 is not set
-# CONFIG_STK8312 is not set
-# CONFIG_STK8BA50 is not set
-# CONFIG_STM is not set
-# CONFIG_STMMAC_ETH is not set
-# CONFIG_STMMAC_PCI is not set
-# CONFIG_STMMAC_PLATFORM is not set
-# CONFIG_STM_DUMMY is not set
-# CONFIG_STM_SOURCE_CONSOLE is not set
-CONFIG_STP=y
-# CONFIG_STREAM_PARSER is not set
-# CONFIG_STRICT_DEVMEM is not set
-CONFIG_STRICT_KERNEL_RWX=y
-CONFIG_STRICT_MODULE_RWX=y
-# CONFIG_STRING_SELFTEST is not set
-CONFIG_STRIP_ASM_SYMS=y
-# CONFIG_STX104 is not set
-# CONFIG_ST_UVIS25 is not set
-# CONFIG_SUN4I_GPADC is not set
-# CONFIG_SUN50I_DE2_BUS is not set
-# CONFIG_SUN50I_ERRATUM_UNKNOWN1 is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_SUNRPC is not set
-# CONFIG_SUNRPC_DEBUG is not set
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SUNXI_SRAM is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_SURFACE_3_BUTTON is not set
-# CONFIG_SUSPEND is not set
-# CONFIG_SUSPEND_SKIP_SYNC is not set
-CONFIG_SWAP=y
-# CONFIG_SWCONFIG is not set
-# CONFIG_SWCONFIG_B53 is not set
-# CONFIG_SWCONFIG_B53_MDIO_DRIVER is not set
-# CONFIG_SWCONFIG_B53_MMAP_DRIVER is not set
-# CONFIG_SWCONFIG_B53_SPI_DRIVER is not set
-# CONFIG_SWCONFIG_B53_SRAB_DRIVER is not set
-# CONFIG_SWCONFIG_LEDS is not set
-# CONFIG_SW_SYNC is not set
-# CONFIG_SX9500 is not set
-# CONFIG_SXGBE_ETH is not set
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_SYNC_FILE is not set
-# CONFIG_SYNOPSYS_DWC_ETH_QOS is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_SYSCON_REBOOT_MODE is not set
-CONFIG_SYSCTL=y
-# CONFIG_SYSCTL_SYSCALL is not set
-CONFIG_SYSFS=y
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-# CONFIG_SYSFS_SYSCALL is not set
-# CONFIG_SYSTEMPORT is not set
-# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
-# CONFIG_SYSTEM_DATA_VERIFICATION is not set
-# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
-CONFIG_SYSTEM_TRUSTED_KEYS=""
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_SYSV_FS is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_T5403 is not set
-# CONFIG_TARGET_CORE is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_TASKS_RCU is not set
-# CONFIG_TASK_XACCT is not set
-# CONFIG_TC35815 is not set
-# CONFIG_TCG_ATMEL is not set
-# CONFIG_TCG_CRB is not set
-# CONFIG_TCG_INFINEON is not set
-# CONFIG_TCG_NSC is not set
-# CONFIG_TCG_ST33_I2C is not set
-# CONFIG_TCG_TIS is not set
-# CONFIG_TCG_TIS_I2C_ATMEL is not set
-# CONFIG_TCG_TIS_I2C_INFINEON is not set
-# CONFIG_TCG_TIS_I2C_NUVOTON is not set
-# CONFIG_TCG_TIS_SPI is not set
-# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
-# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_TCG_VTPM_PROXY is not set
-# CONFIG_TCG_XEN is not set
-# CONFIG_TCIC is not set
-CONFIG_TCP_CONG_ADVANCED=y
-# CONFIG_TCP_CONG_BBR is not set
-# CONFIG_TCP_CONG_BIC is not set
-# CONFIG_TCP_CONG_CDG is not set
-CONFIG_TCP_CONG_CUBIC=y
-# CONFIG_TCP_CONG_DCTCP is not set
-# CONFIG_TCP_CONG_HSTCP is not set
-# CONFIG_TCP_CONG_HTCP is not set
-# CONFIG_TCP_CONG_HYBLA is not set
-# CONFIG_TCP_CONG_ILLINOIS is not set
-# CONFIG_TCP_CONG_LP is not set
-# CONFIG_TCP_CONG_NV is not set
-# CONFIG_TCP_CONG_SCALABLE is not set
-# CONFIG_TCP_CONG_VEGAS is not set
-# CONFIG_TCP_CONG_VENO is not set
-# CONFIG_TCP_CONG_WESTWOOD is not set
-# CONFIG_TCP_CONG_YEAH is not set
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_TCS3414 is not set
-# CONFIG_TCS3472 is not set
-# CONFIG_TEE is not set
-# CONFIG_TEGRA_AHB is not set
-# CONFIG_TEGRA_HOST1X is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_TERANETICS_PHY is not set
-# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
-# CONFIG_TEST_BITFIELD is not set
-# CONFIG_TEST_BITMAP is not set
-# CONFIG_TEST_BPF is not set
-# CONFIG_TEST_FIRMWARE is not set
-# CONFIG_TEST_HASH is not set
-# CONFIG_TEST_HEXDUMP is not set
-# CONFIG_TEST_IDA is not set
-# CONFIG_TEST_KASAN is not set
-# CONFIG_TEST_KMOD is not set
-# CONFIG_TEST_KSTRTOX is not set
-# CONFIG_TEST_LIST_SORT is not set
-# CONFIG_TEST_LKM is not set
-# CONFIG_TEST_OVERFLOW is not set
-# CONFIG_TEST_POWER is not set
-# CONFIG_TEST_PRINTF is not set
-# CONFIG_TEST_RHASHTABLE is not set
-# CONFIG_TEST_SORT is not set
-# CONFIG_TEST_STATIC_KEYS is not set
-# CONFIG_TEST_STRING_HELPERS is not set
-# CONFIG_TEST_SYSCTL is not set
-# CONFIG_TEST_UBSAN is not set
-# CONFIG_TEST_UDELAY is not set
-# CONFIG_TEST_USER_COPY is not set
-# CONFIG_TEST_UUID is not set
-CONFIG_TEXTSEARCH=y
-# CONFIG_TEXTSEARCH_BM is not set
-# CONFIG_TEXTSEARCH_FSM is not set
-# CONFIG_TEXTSEARCH_KMP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
-# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
-# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
-# CONFIG_THERMAL_EMULATION is not set
-# CONFIG_THERMAL_GOV_BANG_BANG is not set
-# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
-# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
-# CONFIG_THERMAL_GOV_USER_SPACE is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_THERMAL_STATISTICS is not set
-# CONFIG_THERMAL_WRITABLE_TRIPS is not set
-# CONFIG_THINKPAD_ACPI is not set
-CONFIG_THIN_ARCHIVES=y
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_THUNDERBOLT is not set
-# CONFIG_THUNDER_NIC_BGX is not set
-# CONFIG_THUNDER_NIC_PF is not set
-# CONFIG_THUNDER_NIC_RGX is not set
-# CONFIG_THUNDER_NIC_VF is not set
-# CONFIG_TICK_CPU_ACCOUNTING is not set
-CONFIG_TICK_ONESHOT=y
-# CONFIG_TIFM_CORE is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_TIMB_DMA is not set
-CONFIG_TIMERFD=y
-# CONFIG_TIMER_STATS is not set
-CONFIG_TINY_RCU=y
-# CONFIG_TIPC is not set
-# CONFIG_TI_ADC081C is not set
-# CONFIG_TI_ADC0832 is not set
-# CONFIG_TI_ADC084S021 is not set
-# CONFIG_TI_ADC108S102 is not set
-# CONFIG_TI_ADC12138 is not set
-# CONFIG_TI_ADC128S052 is not set
-# CONFIG_TI_ADC161S626 is not set
-# CONFIG_TI_ADS1015 is not set
-# CONFIG_TI_ADS7950 is not set
-# CONFIG_TI_ADS8688 is not set
-# CONFIG_TI_AM335X_ADC is not set
-# CONFIG_TI_CPSW is not set
-# CONFIG_TI_CPSW_ALE is not set
-# CONFIG_TI_CPTS is not set
-# CONFIG_TI_DAC082S085 is not set
-# CONFIG_TI_DAC5571 is not set
-# CONFIG_TI_DAC7512 is not set
-# CONFIG_TI_DAVINCI_CPDMA is not set
-# CONFIG_TI_DAVINCI_MDIO is not set
-# CONFIG_TI_ST is not set
-# CONFIG_TI_SYSCON_RESET is not set
-# CONFIG_TI_TLC4541 is not set
-# CONFIG_TLAN is not set
-# CONFIG_TLS is not set
-# CONFIG_TMD_HERMES is not set
-# CONFIG_TMP006 is not set
-# CONFIG_TMP007 is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-CONFIG_TMPFS_XATTR=y
-# CONFIG_TOPSTAR_LAPTOP is not set
-# CONFIG_TORTURE_TEST is not set
-# CONFIG_TOSHIBA_HAPS is not set
-# CONFIG_TOUCHSCREEN_88PM860X is not set
-# CONFIG_TOUCHSCREEN_AD7877 is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
-# CONFIG_TOUCHSCREEN_ADC is not set
-# CONFIG_TOUCHSCREEN_ADS7846 is not set
-# CONFIG_TOUCHSCREEN_AR1021_I2C is not set
-# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
-# CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set
-# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
-# CONFIG_TOUCHSCREEN_BU21013 is not set
-# CONFIG_TOUCHSCREEN_BU21029 is not set
-# CONFIG_TOUCHSCREEN_CHIPONE_ICN8318 is not set
-# CONFIG_TOUCHSCREEN_CHIPONE_ICN8505 is not set
-# CONFIG_TOUCHSCREEN_COLIBRI_VF50 is not set
-# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set
-# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set
-# CONFIG_TOUCHSCREEN_CYTTSP4_I2C is not set
-# CONFIG_TOUCHSCREEN_CYTTSP4_SPI is not set
-# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set
-# CONFIG_TOUCHSCREEN_CYTTSP_I2C is not set
-# CONFIG_TOUCHSCREEN_CYTTSP_SPI is not set
-# CONFIG_TOUCHSCREEN_DA9034 is not set
-# CONFIG_TOUCHSCREEN_DA9052 is not set
-# CONFIG_TOUCHSCREEN_DYNAPRO is not set
-# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set
-# CONFIG_TOUCHSCREEN_EETI is not set
-# CONFIG_TOUCHSCREEN_EGALAX is not set
-# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set
-# CONFIG_TOUCHSCREEN_EKTF2127 is not set
-# CONFIG_TOUCHSCREEN_ELAN is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_EXC3000 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GOODIX is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
-# CONFIG_TOUCHSCREEN_HIDEEP is not set
-# CONFIG_TOUCHSCREEN_HP600 is not set
-# CONFIG_TOUCHSCREEN_HP7XX is not set
-# CONFIG_TOUCHSCREEN_HTCPEN is not set
-# CONFIG_TOUCHSCREEN_ILI210X is not set
-# CONFIG_TOUCHSCREEN_IMX6UL_TSC is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_IPAQ_MICRO is not set
-# CONFIG_TOUCHSCREEN_IPROC is not set
-# CONFIG_TOUCHSCREEN_LPC32XX is not set
-# CONFIG_TOUCHSCREEN_MAX11801 is not set
-# CONFIG_TOUCHSCREEN_MC13783 is not set
-# CONFIG_TOUCHSCREEN_MCS5000 is not set
-# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set
-# CONFIG_TOUCHSCREEN_MIGOR is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_MMS114 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MX25 is not set
-# CONFIG_TOUCHSCREEN_MXS_LRADC is not set
-# CONFIG_TOUCHSCREEN_PCAP is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_PIXCIR is not set
-# CONFIG_TOUCHSCREEN_PROPERTIES is not set
-# CONFIG_TOUCHSCREEN_RM_TS is not set
-# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set
-# CONFIG_TOUCHSCREEN_RPI_FT5406 is not set
-# CONFIG_TOUCHSCREEN_S3C2410 is not set
-# CONFIG_TOUCHSCREEN_S6SY761 is not set
-# CONFIG_TOUCHSCREEN_SILEAD is not set
-# CONFIG_TOUCHSCREEN_SIS_I2C is not set
-# CONFIG_TOUCHSCREEN_ST1232 is not set
-# CONFIG_TOUCHSCREEN_STMFTS is not set
-# CONFIG_TOUCHSCREEN_STMPE is not set
-# CONFIG_TOUCHSCREEN_SUN4I is not set
-# CONFIG_TOUCHSCREEN_SUR40 is not set
-# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set
-# CONFIG_TOUCHSCREEN_SX8654 is not set
-# CONFIG_TOUCHSCREEN_TI_AM335X_TSC is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TPS6507X is not set
-# CONFIG_TOUCHSCREEN_TS4800 is not set
-# CONFIG_TOUCHSCREEN_TSC2004 is not set
-# CONFIG_TOUCHSCREEN_TSC2005 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
-# CONFIG_TOUCHSCREEN_TSC2007_IIO is not set
-# CONFIG_TOUCHSCREEN_TSC200X_CORE is not set
-# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_3M is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_TOUCHSCREEN_USB_DMC_TSC10 is not set
-# CONFIG_TOUCHSCREEN_USB_E2I is not set
-# CONFIG_TOUCHSCREEN_USB_EASYTOUCH is not set
-# CONFIG_TOUCHSCREEN_USB_EGALAX is not set
-# CONFIG_TOUCHSCREEN_USB_ELO is not set
-# CONFIG_TOUCHSCREEN_USB_ETT_TC45USB is not set
-# CONFIG_TOUCHSCREEN_USB_ETURBO is not set
-# CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH is not set
-# CONFIG_TOUCHSCREEN_USB_GOTOP is not set
-# CONFIG_TOUCHSCREEN_USB_GUNZE is not set
-# CONFIG_TOUCHSCREEN_USB_IDEALTEK is not set
-# CONFIG_TOUCHSCREEN_USB_IRTOUCH is not set
-# CONFIG_TOUCHSCREEN_USB_ITM is not set
-# CONFIG_TOUCHSCREEN_USB_JASTEC is not set
-# CONFIG_TOUCHSCREEN_USB_NEXIO is not set
-# CONFIG_TOUCHSCREEN_USB_PANJIT is not set
-# CONFIG_TOUCHSCREEN_USB_ZYTRONIC is not set
-# CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_TOUCHSCREEN_WACOM_I2C is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set
-# CONFIG_TOUCHSCREEN_WM831X is not set
-# CONFIG_TOUCHSCREEN_WM9705 is not set
-# CONFIG_TOUCHSCREEN_WM9712 is not set
-# CONFIG_TOUCHSCREEN_WM9713 is not set
-# CONFIG_TOUCHSCREEN_WM97XX is not set
-# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
-# CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE is not set
-# CONFIG_TOUCHSCREEN_ZET6223 is not set
-# CONFIG_TOUCHSCREEN_ZFORCE is not set
-# CONFIG_TPL0102 is not set
-# CONFIG_TPS6105X is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TPS6507X is not set
-# CONFIG_TRACEPOINT_BENCHMARK is not set
-# CONFIG_TRACER_SNAPSHOT is not set
-# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_TRACE_EVAL_MAP_FILE is not set
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_TRACE_SINK is not set
-# CONFIG_TRACING_EVENTS_GPIO is not set
-CONFIG_TRACING_SUPPORT=y
-CONFIG_TRAD_SIGNALS=y
-# CONFIG_TRANSPARENT_HUGEPAGE is not set
-# CONFIG_TREE_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_TRIM_UNUSED_KSYMS is not set
-# CONFIG_TRUSTED_KEYS is not set
-# CONFIG_TSL2583 is not set
-# CONFIG_TSL2772 is not set
-# CONFIG_TSL2x7x is not set
-# CONFIG_TSL4531 is not set
-# CONFIG_TSYS01 is not set
-# CONFIG_TSYS02D is not set
-# CONFIG_TTPCI_EEPROM is not set
-CONFIG_TTY=y
-# CONFIG_TTY_PRINTK is not set
-# CONFIG_TUN is not set
-# CONFIG_TUN_VNET_CROSS_LE is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_TWL4030_MADC is not set
-# CONFIG_TWL6030_GPADC is not set
-# CONFIG_TWL6040_CORE is not set
-# CONFIG_TYPEC is not set
-# CONFIG_TYPEC_TCPM is not set
-# CONFIG_TYPEC_UCSI is not set
-# CONFIG_TYPHOON is not set
-# CONFIG_UACCESS_WITH_MEMCPY is not set
-# CONFIG_UBIFS_ATIME_SUPPORT is not set
-# CONFIG_UBIFS_FS_ENCRYPTION is not set
-# CONFIG_UBIFS_FS_SECURITY is not set
-# CONFIG_UBIFS_FS_XATTR is not set
-# CONFIG_UBSAN is not set
-# CONFIG_UCB1400_CORE is not set
-# CONFIG_UCSI is not set
-# CONFIG_UDF_FS is not set
-CONFIG_UEVENT_HELPER=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_UFS_FS is not set
-# CONFIG_UHID is not set
-CONFIG_UID16=y
-# CONFIG_UIO is not set
-# CONFIG_ULTRA is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_UNISYSSPAR is not set
-# CONFIG_UNISYS_VISORBUS is not set
-CONFIG_UNIX=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_UNIX_DIAG is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_UPROBES is not set
-# CONFIG_UPROBE_EVENTS is not set
-# CONFIG_US5182D is not set
-# CONFIG_USB is not set
-# CONFIG_USBIP_CORE is not set
-CONFIG_USBIP_VHCI_HC_PORTS=8
-CONFIG_USBIP_VHCI_NR_HCS=1
-# CONFIG_USBIP_VUDC is not set
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_ADUTUX is not set
-CONFIG_USB_ALI_M5632=y
-# CONFIG_USB_AMD5536UDC is not set
-CONFIG_USB_AN2720=y
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARMLINUX=y
-# CONFIG_USB_ATM is not set
-# CONFIG_USB_BDC_UDC is not set
-CONFIG_USB_BELKIN=y
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
-# CONFIG_USB_CHAOSKEY is not set
-# CONFIG_USB_CHIPIDEA is not set
-# CONFIG_USB_CONFIGFS is not set
-# CONFIG_USB_CXACRU is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-CONFIG_USB_DEFAULT_PERSIST=y
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_DUMMY_HCD is not set
-# CONFIG_USB_DWC2 is not set
-# CONFIG_USB_DWC2_DEBUG is not set
-# CONFIG_USB_DWC2_DUAL_ROLE is not set
-# CONFIG_USB_DWC2_HOST is not set
-# CONFIG_USB_DWC2_PERIPHERAL is not set
-# CONFIG_USB_DWC3 is not set
-# CONFIG_USB_DWC3_EXYNOS is not set
-# CONFIG_USB_DWC3_HAPS is not set
-# CONFIG_USB_DWC3_KEYSTONE is not set
-# CONFIG_USB_DWC3_OF_SIMPLE is not set
-# CONFIG_USB_DWC3_PCI is not set
-# CONFIG_USB_DWC3_QCOM is not set
-# CONFIG_USB_DWC3_ULPI is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_EG20T is not set
-# CONFIG_USB_EHCI_ATH79 is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_EHCI_HCD_AT91 is not set
-# CONFIG_USB_EHCI_HCD_OMAP is not set
-# CONFIG_USB_EHCI_HCD_PPC_OF is not set
-# CONFIG_USB_EHCI_MSM is not set
-# CONFIG_USB_EHCI_MV is not set
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_EHCI_TT_NEWSCHED=y
-# CONFIG_USB_EHSET_TEST_FIXTURE is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EPSON2888 is not set
-# CONFIG_USB_EZUSB_FX2 is not set
-# CONFIG_USB_FOTG210_HCD is not set
-# CONFIG_USB_FOTG210_UDC is not set
-# CONFIG_USB_FSL_USB2 is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_FUNCTIONFS is not set
-# CONFIG_USB_FUSB300 is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_GADGET_DEBUG is not set
-# CONFIG_USB_GADGET_DEBUG_FILES is not set
-# CONFIG_USB_GADGET_DEBUG_FS is not set
-CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2
-CONFIG_USB_GADGET_VBUS_DRAW=2
-# CONFIG_USB_GADGET_XILINX is not set
-# CONFIG_USB_GL860 is not set
-# CONFIG_USB_GOKU is not set
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_USB_GR_UDC is not set
-# CONFIG_USB_GSPCA is not set
-# CONFIG_USB_GSPCA_BENQ is not set
-# CONFIG_USB_GSPCA_CONEX is not set
-# CONFIG_USB_GSPCA_CPIA1 is not set
-# CONFIG_USB_GSPCA_DTCS033 is not set
-# CONFIG_USB_GSPCA_ETOMS is not set
-# CONFIG_USB_GSPCA_FINEPIX is not set
-# CONFIG_USB_GSPCA_JEILINJ is not set
-# CONFIG_USB_GSPCA_JL2005BCD is not set
-# CONFIG_USB_GSPCA_KINECT is not set
-# CONFIG_USB_GSPCA_KONICA is not set
-# CONFIG_USB_GSPCA_MARS is not set
-# CONFIG_USB_GSPCA_MR97310A is not set
-# CONFIG_USB_GSPCA_NW80X is not set
-# CONFIG_USB_GSPCA_OV519 is not set
-# CONFIG_USB_GSPCA_OV534 is not set
-# CONFIG_USB_GSPCA_OV534_9 is not set
-# CONFIG_USB_GSPCA_PAC207 is not set
-# CONFIG_USB_GSPCA_PAC7302 is not set
-# CONFIG_USB_GSPCA_PAC7311 is not set
-# CONFIG_USB_GSPCA_SE401 is not set
-# CONFIG_USB_GSPCA_SN9C2028 is not set
-# CONFIG_USB_GSPCA_SN9C20X is not set
-# CONFIG_USB_GSPCA_SONIXB is not set
-# CONFIG_USB_GSPCA_SONIXJ is not set
-# CONFIG_USB_GSPCA_SPCA1528 is not set
-# CONFIG_USB_GSPCA_SPCA500 is not set
-# CONFIG_USB_GSPCA_SPCA501 is not set
-# CONFIG_USB_GSPCA_SPCA505 is not set
-# CONFIG_USB_GSPCA_SPCA506 is not set
-# CONFIG_USB_GSPCA_SPCA508 is not set
-# CONFIG_USB_GSPCA_SPCA561 is not set
-# CONFIG_USB_GSPCA_SQ905 is not set
-# CONFIG_USB_GSPCA_SQ905C is not set
-# CONFIG_USB_GSPCA_SQ930X is not set
-# CONFIG_USB_GSPCA_STK014 is not set
-# CONFIG_USB_GSPCA_STK1135 is not set
-# CONFIG_USB_GSPCA_STV0680 is not set
-# CONFIG_USB_GSPCA_SUNPLUS is not set
-# CONFIG_USB_GSPCA_T613 is not set
-# CONFIG_USB_GSPCA_TOPRO is not set
-# CONFIG_USB_GSPCA_TOUPTEK is not set
-# CONFIG_USB_GSPCA_TV8532 is not set
-# CONFIG_USB_GSPCA_VC032X is not set
-# CONFIG_USB_GSPCA_VICAM is not set
-# CONFIG_USB_GSPCA_XIRLINK_CIT is not set
-# CONFIG_USB_GSPCA_ZC3XX is not set
-# CONFIG_USB_G_ACM_MS is not set
-# CONFIG_USB_G_DBGP is not set
-# CONFIG_USB_G_HID is not set
-# CONFIG_USB_G_MULTI is not set
-# CONFIG_USB_G_NCM is not set
-# CONFIG_USB_G_NOKIA is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_G_WEBCAM is not set
-# CONFIG_USB_HCD_TEST_MODE is not set
-# CONFIG_USB_HID is not set
-# CONFIG_USB_HIDDEV is not set
-# CONFIG_USB_HSIC_USB3503 is not set
-# CONFIG_USB_HSIC_USB4604 is not set
-# CONFIG_USB_HSO is not set
-# CONFIG_USB_HUB_USB251XB is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_IMX21_HCD is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_IPHETH is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1301 is not set
-# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_ISP1760 is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_KC2190 is not set
-# CONFIG_USB_LAN78XX is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
-# CONFIG_USB_LED_TRIG is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LINK_LAYER_TEST is not set
-# CONFIG_USB_M5602 is not set
-# CONFIG_USB_M66592 is not set
-# CONFIG_USB_MASS_STORAGE is not set
-# CONFIG_USB_MAX3421_HCD is not set
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_MSM_OTG is not set
-# CONFIG_USB_MTU3 is not set
-# CONFIG_USB_MUSB_HDRC is not set
-# CONFIG_USB_MV_U3D is not set
-# CONFIG_USB_MV_UDC is not set
-# CONFIG_USB_MXS_PHY is not set
-# CONFIG_USB_NET2272 is not set
-# CONFIG_USB_NET2280 is not set
-# CONFIG_USB_NET_AX88179_178A is not set
-# CONFIG_USB_NET_AX8817X is not set
-# CONFIG_USB_NET_CDCETHER is not set
-# CONFIG_USB_NET_CDC_EEM is not set
-# CONFIG_USB_NET_CDC_MBIM is not set
-# CONFIG_USB_NET_CDC_NCM is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-# CONFIG_USB_NET_CH9200 is not set
-# CONFIG_USB_NET_CX82310_ETH is not set
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_DRIVERS is not set
-# CONFIG_USB_NET_GL620A is not set
-# CONFIG_USB_NET_HUAWEI_CDC_NCM is not set
-# CONFIG_USB_NET_INT51X1 is not set
-# CONFIG_USB_NET_KALMIA is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_NET1080 is not set
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_QMI_WWAN is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_USB_NET_SMSC75XX is not set
-# CONFIG_USB_NET_SMSC95XX is not set
-# CONFIG_USB_NET_SR9700 is not set
-# CONFIG_USB_NET_SR9800 is not set
-# CONFIG_USB_NET_ZAURUS is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_OHCI_HCD_PCI is not set
-# CONFIG_USB_OHCI_HCD_PPC_OF is not set
-# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
-# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
-# CONFIG_USB_OHCI_HCD_SSB is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_OTG_FSM is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_PCI is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_PHY is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_PWC_INPUT_EVDEV is not set
-# CONFIG_USB_PXA27X is not set
-# CONFIG_USB_R8A66597 is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_RCAR_PHY is not set
-# CONFIG_USB_RENESAS_USBHS is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_ROLE_SWITCH is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_RTL8152 is not set
-# CONFIG_USB_S2255 is not set
-# CONFIG_USB_SERIAL is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_CP210X is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_F81232 is not set
-# CONFIG_USB_SERIAL_F8153X is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_METRO is not set
-# CONFIG_USB_SERIAL_MOS7715_PARPORT is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MXUPORT is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_QCAUX is not set
-# CONFIG_USB_SERIAL_QT2 is not set
-# CONFIG_USB_SERIAL_QUALCOMM is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-CONFIG_USB_SERIAL_SAFE_PADDED=y
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SIMPLE is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_SSU100 is not set
-# CONFIG_USB_SERIAL_SYMBOL is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_UPD78F0730 is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_WISHBONE is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SERIAL_XSENS_MT is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_SIERRA_NET is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_SNP_UDC_PLAT is not set
-# CONFIG_USB_SPEEDTOUCH is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_ENE_UB6250 is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_REALTEK is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STV06XX is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_USB_SWITCH_FSA9480 is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_TMC is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_UAS is not set
-# CONFIG_USB_UEAGLEATM is not set
-# CONFIG_USB_ULPI is not set
-# CONFIG_USB_ULPI_BUS is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_USS720 is not set
-# CONFIG_USB_VIDEO_CLASS is not set
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-# CONFIG_USB_VL600 is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-# CONFIG_USB_XHCI_DBGCAP is not set
-# CONFIG_USB_XHCI_HCD is not set
-# CONFIG_USB_XHCI_MVEBU is not set
-# CONFIG_USB_XUSBATM is not set
-# CONFIG_USB_YUREX is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USELIB is not set
-# CONFIG_USERFAULTFD is not set
-# CONFIG_USE_OF is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_UWB is not set
-# CONFIG_U_SERIAL_CONSOLE is not set
-# CONFIG_V4L_MEM2MEM_DRIVERS is not set
-# CONFIG_V4L_TEST_DRIVERS is not set
-# CONFIG_VBOXGUEST is not set
-# CONFIG_VCNL4000 is not set
-CONFIG_VDSO=y
-# CONFIG_VEML6070 is not set
-# CONFIG_VETH is not set
-# CONFIG_VEXPRESS_CONFIG is not set
-# CONFIG_VF610_ADC is not set
-# CONFIG_VF610_DAC is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VGA_ARB is not set
-# CONFIG_VGA_SWITCHEROO is not set
-# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
-# CONFIG_VHOST_NET is not set
-# CONFIG_VHOST_VSOCK is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_VIDEO_ADV7170 is not set
-# CONFIG_VIDEO_ADV7175 is not set
-# CONFIG_VIDEO_ADV7180 is not set
-# CONFIG_VIDEO_ADV7183 is not set
-# CONFIG_VIDEO_ADV7343 is not set
-# CONFIG_VIDEO_ADV7393 is not set
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_AK881X is not set
-# CONFIG_VIDEO_BT819 is not set
-# CONFIG_VIDEO_BT848 is not set
-# CONFIG_VIDEO_BT856 is not set
-# CONFIG_VIDEO_BT866 is not set
-# CONFIG_VIDEO_CADENCE is not set
-# CONFIG_VIDEO_CAFE_CCIC is not set
-# CONFIG_VIDEO_CS3308 is not set
-# CONFIG_VIDEO_CS5345 is not set
-# CONFIG_VIDEO_CS53L32A is not set
-# CONFIG_VIDEO_CX231XX is not set
-# CONFIG_VIDEO_CX2341X is not set
-# CONFIG_VIDEO_CX25840 is not set
-# CONFIG_VIDEO_CX88 is not set
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_DM6446_CCDC is not set
-# CONFIG_VIDEO_DT3155 is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_GO7007 is not set
-# CONFIG_VIDEO_HDPVR is not set
-# CONFIG_VIDEO_HEXIUM_GEMINI is not set
-# CONFIG_VIDEO_HEXIUM_ORION is not set
-# CONFIG_VIDEO_I2C is not set
-# CONFIG_VIDEO_IR_I2C is not set
-# CONFIG_VIDEO_IVTV is not set
-# CONFIG_VIDEO_KS0127 is not set
-# CONFIG_VIDEO_M52790 is not set
-# CONFIG_VIDEO_ML86V7667 is not set
-# CONFIG_VIDEO_MSP3400 is not set
-# CONFIG_VIDEO_MT9M111 is not set
-# CONFIG_VIDEO_MT9T112 is not set
-# CONFIG_VIDEO_MT9V011 is not set
-# CONFIG_VIDEO_MT9V111 is not set
-# CONFIG_VIDEO_MXB is not set
-# CONFIG_VIDEO_NOON010PC30 is not set
-# CONFIG_VIDEO_OMAP2_VOUT is not set
-# CONFIG_VIDEO_OV2640 is not set
-# CONFIG_VIDEO_OV2659 is not set
-# CONFIG_VIDEO_OV5695 is not set
-# CONFIG_VIDEO_OV6650 is not set
-# CONFIG_VIDEO_OV7640 is not set
-# CONFIG_VIDEO_OV7670 is not set
-# CONFIG_VIDEO_OV772X is not set
-# CONFIG_VIDEO_OV7740 is not set
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_RJ54N1 is not set
-# CONFIG_VIDEO_SAA6588 is not set
-# CONFIG_VIDEO_SAA6752HS is not set
-# CONFIG_VIDEO_SAA7110 is not set
-# CONFIG_VIDEO_SAA711X is not set
-# CONFIG_VIDEO_SAA7127 is not set
-# CONFIG_VIDEO_SAA7134 is not set
-# CONFIG_VIDEO_SAA717X is not set
-# CONFIG_VIDEO_SAA7185 is not set
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
-# CONFIG_VIDEO_SONY_BTF_MPX is not set
-# CONFIG_VIDEO_SR030PC30 is not set
-# CONFIG_VIDEO_TDA7432 is not set
-# CONFIG_VIDEO_TDA9840 is not set
-# CONFIG_VIDEO_TEA6415C is not set
-# CONFIG_VIDEO_TEA6420 is not set
-# CONFIG_VIDEO_THS7303 is not set
-# CONFIG_VIDEO_THS8200 is not set
-# CONFIG_VIDEO_TIMBERDALE is not set
-# CONFIG_VIDEO_TLV320AIC23B is not set
-# CONFIG_VIDEO_TM6000 is not set
-# CONFIG_VIDEO_TVAUDIO is not set
-# CONFIG_VIDEO_TVP514X is not set
-# CONFIG_VIDEO_TVP5150 is not set
-# CONFIG_VIDEO_TVP7002 is not set
-# CONFIG_VIDEO_TW2804 is not set
-# CONFIG_VIDEO_TW9903 is not set
-# CONFIG_VIDEO_TW9906 is not set
-# CONFIG_VIDEO_TW9910 is not set
-# CONFIG_VIDEO_UDA1342 is not set
-# CONFIG_VIDEO_UPD64031A is not set
-# CONFIG_VIDEO_UPD64083 is not set
-# CONFIG_VIDEO_USBTV is not set
-# CONFIG_VIDEO_USBVISION is not set
-# CONFIG_VIDEO_V4L2 is not set
-# CONFIG_VIDEO_VP27SMPX is not set
-# CONFIG_VIDEO_VPX3220 is not set
-# CONFIG_VIDEO_VS6624 is not set
-# CONFIG_VIDEO_WM8739 is not set
-# CONFIG_VIDEO_WM8775 is not set
-# CONFIG_VIDEO_ZORAN is not set
-# CONFIG_VIRTIO_BALLOON is not set
-# CONFIG_VIRTIO_BLK_SCSI is not set
-# CONFIG_VIRTIO_INPUT is not set
-CONFIG_VIRTIO_MENU=y
-# CONFIG_VIRTIO_MMIO is not set
-# CONFIG_VIRTIO_PCI is not set
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
-# CONFIG_VIRT_DRIVERS is not set
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_VL6180 is not set
-CONFIG_VLAN_8021Q=y
-# CONFIG_VLAN_8021Q_GVRP is not set
-# CONFIG_VLAN_8021Q_MVRP is not set
-# CONFIG_VME_BUS is not set
-# CONFIG_VMSPLIT_1G is not set
-# CONFIG_VMSPLIT_2G is not set
-# CONFIG_VMSPLIT_2G_OPT is not set
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VMSPLIT_3G_OPT is not set
-# CONFIG_VMWARE_PVSCSI is not set
-# CONFIG_VMXNET3 is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_VOP_BUS is not set
-# CONFIG_VORTEX is not set
-# CONFIG_VSOCKETS is not set
-# CONFIG_VSOCKETS_DIAG is not set
-# CONFIG_VT is not set
-# CONFIG_VT6655 is not set
-# CONFIG_VT6656 is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_VXGE is not set
-# CONFIG_VXLAN is not set
-# CONFIG_VZ89X is not set
-# CONFIG_W1 is not set
-# CONFIG_W1_CON is not set
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_DS2482 is not set
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_GPIO is not set
-# CONFIG_W1_MASTER_MATROX is not set
-# CONFIG_W1_SLAVE_DS2405 is not set
-# CONFIG_W1_SLAVE_DS2406 is not set
-# CONFIG_W1_SLAVE_DS2408 is not set
-# CONFIG_W1_SLAVE_DS2413 is not set
-# CONFIG_W1_SLAVE_DS2423 is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2438 is not set
-# CONFIG_W1_SLAVE_DS2780 is not set
-# CONFIG_W1_SLAVE_DS2781 is not set
-# CONFIG_W1_SLAVE_DS2805 is not set
-# CONFIG_W1_SLAVE_DS28E04 is not set
-# CONFIG_W1_SLAVE_DS28E17 is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W83627HF_WDT is not set
-# CONFIG_W83877F_WDT is not set
-# CONFIG_W83977F_WDT is not set
-# CONFIG_WAN is not set
-# CONFIG_WANXL is not set
-# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_CORE is not set
-CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
-# CONFIG_WATCHDOG_SYSFS is not set
-# CONFIG_WD80x3 is not set
-# CONFIG_WDAT_WDT is not set
-# CONFIG_WDTPCI is not set
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PRIV=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_SPY=y
-CONFIG_WILINK_PLATFORM_DATA=y
-# CONFIG_WIMAX is not set
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-# CONFIG_WIRELESS_WDS is not set
-# CONFIG_WIZNET_W5100 is not set
-# CONFIG_WIZNET_W5300 is not set
-# CONFIG_WL1251 is not set
-# CONFIG_WL12XX is not set
-# CONFIG_WL18XX is not set
-CONFIG_WLAN=y
-# CONFIG_WLAN_VENDOR_ADMTEK is not set
-# CONFIG_WLAN_VENDOR_ATH is not set
-# CONFIG_WLAN_VENDOR_ATMEL is not set
-# CONFIG_WLAN_VENDOR_BROADCOM is not set
-# CONFIG_WLAN_VENDOR_CISCO is not set
-# CONFIG_WLAN_VENDOR_INTEL is not set
-# CONFIG_WLAN_VENDOR_INTERSIL is not set
-# CONFIG_WLAN_VENDOR_MARVELL is not set
-# CONFIG_WLAN_VENDOR_MEDIATEK is not set
-# CONFIG_WLAN_VENDOR_QUANTENNA is not set
-# CONFIG_WLAN_VENDOR_RALINK is not set
-# CONFIG_WLAN_VENDOR_REALTEK is not set
-# CONFIG_WLAN_VENDOR_RSI is not set
-# CONFIG_WLAN_VENDOR_ST is not set
-# CONFIG_WLAN_VENDOR_TI is not set
-# CONFIG_WLAN_VENDOR_ZYDAS is not set
-# CONFIG_WLCORE is not set
-CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
-# CONFIG_WQ_WATCHDOG is not set
-# CONFIG_WW_MUTEX_SELFTEST is not set
-# CONFIG_X25 is not set
-# CONFIG_X509_CERTIFICATE_PARSER is not set
-# CONFIG_X86_PKG_TEMP_THERMAL is not set
-CONFIG_X86_SYSFB=y
-# CONFIG_XDP_SOCKETS is not set
-# CONFIG_XEN is not set
-# CONFIG_XEN_GRANT_DMA_ALLOC is not set
-# CONFIG_XEN_PVCALLS_FRONTEND is not set
-CONFIG_XEN_SCRUB_PAGES_DEFAULT=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_INTERFACE is not set
-# CONFIG_XFRM_IPCOMP is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_XFS_ONLINE_SCRUB is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_WARN is not set
-# CONFIG_XILINX_AXI_EMAC is not set
-# CONFIG_XILINX_DMA is not set
-# CONFIG_XILINX_EMACLITE is not set
-# CONFIG_XILINX_GMII2RGMII is not set
-# CONFIG_XILINX_LL_TEMAC is not set
-# CONFIG_XILINX_VCU is not set
-# CONFIG_XILINX_WATCHDOG is not set
-# CONFIG_XILINX_ZYNQMP_DMA is not set
-# CONFIG_XILLYBUS is not set
-# CONFIG_XIL_AXIS_FIFO is not set
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_XMON is not set
-CONFIG_XZ_DEC=y
-# CONFIG_XZ_DEC_ARM is not set
-# CONFIG_XZ_DEC_ARMTHUMB is not set
-# CONFIG_XZ_DEC_BCJ is not set
-# CONFIG_XZ_DEC_IA64 is not set
-# CONFIG_XZ_DEC_POWERPC is not set
-# CONFIG_XZ_DEC_SPARC is not set
-# CONFIG_XZ_DEC_TEST is not set
-# CONFIG_XZ_DEC_X86 is not set
-# CONFIG_YAM is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_YENTA is not set
-# CONFIG_YENTA_O2 is not set
-# CONFIG_YENTA_RICOH is not set
-# CONFIG_YENTA_TI is not set
-# CONFIG_YENTA_TOSHIBA is not set
-# CONFIG_ZBUD is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_ZD1211RW_DEBUG is not set
-# CONFIG_ZEROPLUS_FF is not set
-# CONFIG_ZIIRAVE_WATCHDOG is not set
-# CONFIG_ZISOFS is not set
-# CONFIG_ZLIB_DEFLATE is not set
-# CONFIG_ZLIB_INFLATE is not set
-CONFIG_ZONE_DMA=y
-# CONFIG_ZOPT2201 is not set
-# CONFIG_ZPA2326 is not set
-# CONFIG_ZPOOL is not set
-# CONFIG_ZRAM is not set
-# CONFIG_ZRAM_MEMORY_TRACKING is not set
-# CONFIG_ZSMALLOC is not set
-# CONFIG_ZX_TDM is not set
+++ /dev/null
-From a779a482fb9b9f8fcdf8b2519c789b4b9bb5dd05 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 16:56:48 +0200
-Subject: build: add a hack for removing non-essential module info
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/module.h | 13 ++++++++-----
- include/linux/moduleparam.h | 15 ++++++++++++---
- init/Kconfig | 7 +++++++
- kernel/module.c | 5 ++++-
- scripts/mod/modpost.c | 12 ++++++++++++
- 5 files changed, 43 insertions(+), 9 deletions(-)
-
---- a/include/linux/module.h
-+++ b/include/linux/module.h
-@@ -160,6 +160,7 @@ extern void cleanup_module(void);
-
- /* Generic info of form tag = "info" */
- #define MODULE_INFO(tag, info) __MODULE_INFO(tag, tag, info)
-+#define MODULE_INFO_STRIP(tag, info) __MODULE_INFO_STRIP(tag, tag, info)
-
- /* For userspace: you can also call me... */
- #define MODULE_ALIAS(_alias) MODULE_INFO(alias, _alias)
-@@ -203,12 +204,12 @@ extern void cleanup_module(void);
- * Author(s), use "Name <email>" or just "Name", for multiple
- * authors use multiple MODULE_AUTHOR() statements/lines.
- */
--#define MODULE_AUTHOR(_author) MODULE_INFO(author, _author)
-+#define MODULE_AUTHOR(_author) MODULE_INFO_STRIP(author, _author)
-
- /* What your module does. */
--#define MODULE_DESCRIPTION(_description) MODULE_INFO(description, _description)
-+#define MODULE_DESCRIPTION(_description) MODULE_INFO_STRIP(description, _description)
-
--#ifdef MODULE
-+#if defined(MODULE) && !defined(CONFIG_MODULE_STRIPPED)
- /* Creates an alias so file2alias.c can find device table. */
- #define MODULE_DEVICE_TABLE(type, name) \
- extern typeof(name) __mod_##type##__##name##_device_table \
-@@ -235,7 +236,9 @@ extern typeof(name) __mod_##type##__##na
- */
-
- #if defined(MODULE) || !defined(CONFIG_SYSFS)
--#define MODULE_VERSION(_version) MODULE_INFO(version, _version)
-+#define MODULE_VERSION(_version) MODULE_INFO_STRIP(version, _version)
-+#elif defined(CONFIG_MODULE_STRIPPED)
-+#define MODULE_VERSION(_version) __MODULE_INFO_DISABLED(version)
- #else
- #define MODULE_VERSION(_version) \
- static struct module_version_attribute ___modver_attr = { \
-@@ -257,7 +260,7 @@ extern typeof(name) __mod_##type##__##na
- /* Optional firmware file (or files) needed by the module
- * format is simply firmware file name. Multiple firmware
- * files require multiple MODULE_FIRMWARE() specifiers */
--#define MODULE_FIRMWARE(_firmware) MODULE_INFO(firmware, _firmware)
-+#define MODULE_FIRMWARE(_firmware) MODULE_INFO_STRIP(firmware, _firmware)
-
- struct notifier_block;
-
---- a/include/linux/moduleparam.h
-+++ b/include/linux/moduleparam.h
-@@ -17,6 +17,16 @@
- /* Chosen so that structs with an unsigned long line up. */
- #define MAX_PARAM_PREFIX_LEN (64 - sizeof(unsigned long))
-
-+/* This struct is here for syntactic coherency, it is not used */
-+#define __MODULE_INFO_DISABLED(name) \
-+ struct __UNIQUE_ID(name) {}
-+
-+#ifdef CONFIG_MODULE_STRIPPED
-+#define __MODULE_INFO_STRIP(tag, name, info) __MODULE_INFO_DISABLED(name)
-+#else
-+#define __MODULE_INFO_STRIP(tag, name, info) __MODULE_INFO(tag, name, info)
-+#endif
-+
- #ifdef MODULE
- #define __MODULE_INFO(tag, name, info) \
- static const char __UNIQUE_ID(name)[] \
-@@ -24,8 +34,7 @@ static const char __UNIQUE_ID(name)[]
- = __stringify(tag) "=" info
- #else /* !MODULE */
- /* This struct is here for syntactic coherency, it is not used */
--#define __MODULE_INFO(tag, name, info) \
-- struct __UNIQUE_ID(name) {}
-+#define __MODULE_INFO(tag, name, info) __MODULE_INFO_DISABLED(name)
- #endif
- #define __MODULE_PARM_TYPE(name, _type) \
- __MODULE_INFO(parmtype, name##type, #name ":" _type)
-@@ -33,7 +42,7 @@ static const char __UNIQUE_ID(name)[]
- /* One for each parameter, describing how to use it. Some files do
- multiple of these per line, so can't just use MODULE_INFO. */
- #define MODULE_PARM_DESC(_parm, desc) \
-- __MODULE_INFO(parm, _parm, #_parm ":" desc)
-+ __MODULE_INFO_STRIP(parm, _parm, #_parm ":" desc)
-
- struct kernel_param;
-
---- a/init/Kconfig
-+++ b/init/Kconfig
-@@ -1997,6 +1997,13 @@ config TRIM_UNUSED_KSYMS
-
- If unsure, or if you need to build out-of-tree modules, say N.
-
-+config MODULE_STRIPPED
-+ bool "Reduce module size"
-+ depends on MODULES
-+ help
-+ Remove module parameter descriptions, author info, version, aliases,
-+ device tables, etc.
-+
- endif # MODULES
-
- config MODULES_TREE_LOOKUP
---- a/kernel/module.c
-+++ b/kernel/module.c
-@@ -3030,9 +3030,11 @@ static int setup_load_info(struct load_i
-
- static int check_modinfo(struct module *mod, struct load_info *info, int flags)
- {
-- const char *modmagic = get_modinfo(info, "vermagic");
- int err;
-
-+#ifndef CONFIG_MODULE_STRIPPED
-+ const char *modmagic = get_modinfo(info, "vermagic");
-+
- if (flags & MODULE_INIT_IGNORE_VERMAGIC)
- modmagic = NULL;
-
-@@ -3053,6 +3055,7 @@ static int check_modinfo(struct module *
- mod->name);
- add_taint_module(mod, TAINT_OOT_MODULE, LOCKDEP_STILL_OK);
- }
-+#endif
-
- check_modinfo_retpoline(mod, info);
-
---- a/scripts/mod/modpost.c
-+++ b/scripts/mod/modpost.c
-@@ -1983,7 +1983,9 @@ static void read_symbols(const char *mod
- symname = remove_dot(info.strtab + sym->st_name);
-
- handle_modversions(mod, &info, sym, symname);
-+#ifndef CONFIG_MODULE_STRIPPED
- handle_moddevtable(mod, &info, sym, symname);
-+#endif
- }
- if (!is_vmlinux(modname) || vmlinux_section_warnings)
- check_sec_ref(mod, modname, &info);
-@@ -2146,8 +2148,10 @@ static void add_header(struct buffer *b,
- buf_printf(b, "\n");
- buf_printf(b, "BUILD_SALT;\n");
- buf_printf(b, "\n");
-+#ifndef CONFIG_MODULE_STRIPPED
- buf_printf(b, "MODULE_INFO(vermagic, VERMAGIC_STRING);\n");
- buf_printf(b, "MODULE_INFO(name, KBUILD_MODNAME);\n");
-+#endif
- buf_printf(b, "\n");
- buf_printf(b, "__visible struct module __this_module\n");
- buf_printf(b, "__attribute__((section(\".gnu.linkonce.this_module\"))) = {\n");
-@@ -2164,8 +2168,10 @@ static void add_header(struct buffer *b,
-
- static void add_intree_flag(struct buffer *b, int is_intree)
- {
-+#ifndef CONFIG_MODULE_STRIPPED
- if (is_intree)
- buf_printf(b, "\nMODULE_INFO(intree, \"Y\");\n");
-+#endif
- }
-
- /* Cannot check for assembler */
-@@ -2178,8 +2184,10 @@ static void add_retpoline(struct buffer
-
- static void add_staging_flag(struct buffer *b, const char *name)
- {
-+#ifndef CONFIG_MODULE_STRIPPED
- if (strstarts(name, "drivers/staging"))
- buf_printf(b, "\nMODULE_INFO(staging, \"Y\");\n");
-+#endif
- }
-
- /**
-@@ -2278,11 +2286,13 @@ static void add_depends(struct buffer *b
-
- static void add_srcversion(struct buffer *b, struct module *mod)
- {
-+#ifndef CONFIG_MODULE_STRIPPED
- if (mod->srcversion[0]) {
- buf_printf(b, "\n");
- buf_printf(b, "MODULE_INFO(srcversion, \"%s\");\n",
- mod->srcversion);
- }
-+#endif
- }
-
- static void write_if_changed(struct buffer *b, const char *fname)
-@@ -2519,7 +2529,9 @@ int main(int argc, char **argv)
- add_staging_flag(&buf, mod->name);
- err |= add_versions(&buf, mod);
- add_depends(&buf, mod, modules);
-+#ifndef CONFIG_MODULE_STRIPPED
- add_moddevtable(&buf, mod);
-+#endif
- add_srcversion(&buf, mod);
-
- sprintf(fname, "%s.mod.c", mod->name);
+++ /dev/null
-From c9ef4ab0f54356ee9f91d9676ea0ec123840ddc7 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 16:57:33 +0200
-Subject: kernel: do not build modules.order
-
-It is not needed for anything on the system and skipping this saves some
-build time, especially in cases where there is nothing to do.
-
-lede-commit: afc1675833a7bf5df094f59f7250369520646d04
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- Makefile | 2 --
- scripts/Makefile.build | 2 +-
- 2 files changed, 1 insertion(+), 3 deletions(-)
-
---- a/Makefile
-+++ b/Makefile
-@@ -1240,7 +1240,6 @@ endif
-
- PHONY += modules
- modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux) modules.builtin
-- $(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.order) > $(objtree)/modules.order
- @$(kecho) ' Building modules, stage 2.';
- $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
-
-@@ -1269,7 +1268,6 @@ _modinst_:
- rm -f $(MODLIB)/build ; \
- ln -s $(CURDIR) $(MODLIB)/build ; \
- fi
-- @cp -f $(objtree)/modules.order $(MODLIB)/
- @cp -f $(objtree)/modules.builtin $(MODLIB)/
- $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
-
---- a/scripts/Makefile.build
-+++ b/scripts/Makefile.build
-@@ -78,7 +78,7 @@ modorder-target := $(obj)/modules.order
- # We keep a list of all modules in $(MODVERDIR)
-
- __build: $(if $(KBUILD_BUILTIN),$(builtin-target) $(lib-target) $(extra-y)) \
-- $(if $(KBUILD_MODULES),$(obj-m) $(modorder-target)) \
-+ $(if $(KBUILD_MODULES),$(obj-m)) \
- $(subdir-ym) $(always)
- @:
-
+++ /dev/null
-From db7c30dcd9a0391bf13b62c9f91e144d762ef43a Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Fri, 7 Jul 2017 17:00:49 +0200
-Subject: Add an OSX specific patch to make the kernel be compiled
-
-lede-commit: 3fc2a24f0422b2f55f9ed43f116db3111f700526
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- scripts/kconfig/Makefile | 3 +
- scripts/mod/elf.h | 3007 ++++++++++++++++++++++++++++++++++++++++++++
- scripts/mod/mk_elfconfig.c | 4 +
- scripts/mod/modpost.h | 4 +
- 4 files changed, 3018 insertions(+)
- create mode 100644 scripts/mod/elf.h
-
---- /dev/null
-+++ b/scripts/mod/elf.h
-@@ -0,0 +1,3007 @@
-+/* This file defines standard ELF types, structures, and macros.
-+ Copyright (C) 1995-2012 Free Software Foundation, Inc.
-+ This file is part of the GNU C Library.
-+
-+ The GNU C Library is free software; you can redistribute it and/or
-+ modify it under the terms of the GNU Lesser General Public
-+ License as published by the Free Software Foundation; either
-+ version 2.1 of the License, or (at your option) any later version.
-+
-+ The GNU C Library is distributed in the hope that it will be useful,
-+ but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ Lesser General Public License for more details.
-+
-+ You should have received a copy of the GNU Lesser General Public
-+ License along with the GNU C Library; if not, see
-+ <http://www.gnu.org/licenses/>. */
-+
-+#ifndef _ELF_H
-+#define _ELF_H 1
-+
-+/* Standard ELF types. */
-+
-+#include <stdint.h>
-+
-+/* Type for a 16-bit quantity. */
-+typedef uint16_t Elf32_Half;
-+typedef uint16_t Elf64_Half;
-+
-+/* Types for signed and unsigned 32-bit quantities. */
-+typedef uint32_t Elf32_Word;
-+typedef int32_t Elf32_Sword;
-+typedef uint32_t Elf64_Word;
-+typedef int32_t Elf64_Sword;
-+
-+/* Types for signed and unsigned 64-bit quantities. */
-+typedef uint64_t Elf32_Xword;
-+typedef int64_t Elf32_Sxword;
-+typedef uint64_t Elf64_Xword;
-+typedef int64_t Elf64_Sxword;
-+
-+/* Type of addresses. */
-+typedef uint32_t Elf32_Addr;
-+typedef uint64_t Elf64_Addr;
-+
-+/* Type of file offsets. */
-+typedef uint32_t Elf32_Off;
-+typedef uint64_t Elf64_Off;
-+
-+/* Type for section indices, which are 16-bit quantities. */
-+typedef uint16_t Elf32_Section;
-+typedef uint16_t Elf64_Section;
-+
-+/* Type for version symbol information. */
-+typedef Elf32_Half Elf32_Versym;
-+typedef Elf64_Half Elf64_Versym;
-+
-+
-+/* The ELF file header. This appears at the start of every ELF file. */
-+
-+#define EI_NIDENT (16)
-+
-+typedef struct
-+{
-+ unsigned char e_ident[EI_NIDENT]; /* Magic number and other info */
-+ Elf32_Half e_type; /* Object file type */
-+ Elf32_Half e_machine; /* Architecture */
-+ Elf32_Word e_version; /* Object file version */
-+ Elf32_Addr e_entry; /* Entry point virtual address */
-+ Elf32_Off e_phoff; /* Program header table file offset */
-+ Elf32_Off e_shoff; /* Section header table file offset */
-+ Elf32_Word e_flags; /* Processor-specific flags */
-+ Elf32_Half e_ehsize; /* ELF header size in bytes */
-+ Elf32_Half e_phentsize; /* Program header table entry size */
-+ Elf32_Half e_phnum; /* Program header table entry count */
-+ Elf32_Half e_shentsize; /* Section header table entry size */
-+ Elf32_Half e_shnum; /* Section header table entry count */
-+ Elf32_Half e_shstrndx; /* Section header string table index */
-+} Elf32_Ehdr;
-+
-+typedef struct
-+{
-+ unsigned char e_ident[EI_NIDENT]; /* Magic number and other info */
-+ Elf64_Half e_type; /* Object file type */
-+ Elf64_Half e_machine; /* Architecture */
-+ Elf64_Word e_version; /* Object file version */
-+ Elf64_Addr e_entry; /* Entry point virtual address */
-+ Elf64_Off e_phoff; /* Program header table file offset */
-+ Elf64_Off e_shoff; /* Section header table file offset */
-+ Elf64_Word e_flags; /* Processor-specific flags */
-+ Elf64_Half e_ehsize; /* ELF header size in bytes */
-+ Elf64_Half e_phentsize; /* Program header table entry size */
-+ Elf64_Half e_phnum; /* Program header table entry count */
-+ Elf64_Half e_shentsize; /* Section header table entry size */
-+ Elf64_Half e_shnum; /* Section header table entry count */
-+ Elf64_Half e_shstrndx; /* Section header string table index */
-+} Elf64_Ehdr;
-+
-+/* Fields in the e_ident array. The EI_* macros are indices into the
-+ array. The macros under each EI_* macro are the values the byte
-+ may have. */
-+
-+#define EI_MAG0 0 /* File identification byte 0 index */
-+#define ELFMAG0 0x7f /* Magic number byte 0 */
-+
-+#define EI_MAG1 1 /* File identification byte 1 index */
-+#define ELFMAG1 'E' /* Magic number byte 1 */
-+
-+#define EI_MAG2 2 /* File identification byte 2 index */
-+#define ELFMAG2 'L' /* Magic number byte 2 */
-+
-+#define EI_MAG3 3 /* File identification byte 3 index */
-+#define ELFMAG3 'F' /* Magic number byte 3 */
-+
-+/* Conglomeration of the identification bytes, for easy testing as a word. */
-+#define ELFMAG "\177ELF"
-+#define SELFMAG 4
-+
-+#define EI_CLASS 4 /* File class byte index */
-+#define ELFCLASSNONE 0 /* Invalid class */
-+#define ELFCLASS32 1 /* 32-bit objects */
-+#define ELFCLASS64 2 /* 64-bit objects */
-+#define ELFCLASSNUM 3
-+
-+#define EI_DATA 5 /* Data encoding byte index */
-+#define ELFDATANONE 0 /* Invalid data encoding */
-+#define ELFDATA2LSB 1 /* 2's complement, little endian */
-+#define ELFDATA2MSB 2 /* 2's complement, big endian */
-+#define ELFDATANUM 3
-+
-+#define EI_VERSION 6 /* File version byte index */
-+ /* Value must be EV_CURRENT */
-+
-+#define EI_OSABI 7 /* OS ABI identification */
-+#define ELFOSABI_NONE 0 /* UNIX System V ABI */
-+#define ELFOSABI_SYSV 0 /* Alias. */
-+#define ELFOSABI_HPUX 1 /* HP-UX */
-+#define ELFOSABI_NETBSD 2 /* NetBSD. */
-+#define ELFOSABI_GNU 3 /* Object uses GNU ELF extensions. */
-+#define ELFOSABI_LINUX ELFOSABI_GNU /* Compatibility alias. */
-+#define ELFOSABI_SOLARIS 6 /* Sun Solaris. */
-+#define ELFOSABI_AIX 7 /* IBM AIX. */
-+#define ELFOSABI_IRIX 8 /* SGI Irix. */
-+#define ELFOSABI_FREEBSD 9 /* FreeBSD. */
-+#define ELFOSABI_TRU64 10 /* Compaq TRU64 UNIX. */
-+#define ELFOSABI_MODESTO 11 /* Novell Modesto. */
-+#define ELFOSABI_OPENBSD 12 /* OpenBSD. */
-+#define ELFOSABI_ARM_AEABI 64 /* ARM EABI */
-+#define ELFOSABI_ARM 97 /* ARM */
-+#define ELFOSABI_STANDALONE 255 /* Standalone (embedded) application */
-+
-+#define EI_ABIVERSION 8 /* ABI version */
-+
-+#define EI_PAD 9 /* Byte index of padding bytes */
-+
-+/* Legal values for e_type (object file type). */
-+
-+#define ET_NONE 0 /* No file type */
-+#define ET_REL 1 /* Relocatable file */
-+#define ET_EXEC 2 /* Executable file */
-+#define ET_DYN 3 /* Shared object file */
-+#define ET_CORE 4 /* Core file */
-+#define ET_NUM 5 /* Number of defined types */
-+#define ET_LOOS 0xfe00 /* OS-specific range start */
-+#define ET_HIOS 0xfeff /* OS-specific range end */
-+#define ET_LOPROC 0xff00 /* Processor-specific range start */
-+#define ET_HIPROC 0xffff /* Processor-specific range end */
-+
-+/* Legal values for e_machine (architecture). */
-+
-+#define EM_NONE 0 /* No machine */
-+#define EM_M32 1 /* AT&T WE 32100 */
-+#define EM_SPARC 2 /* SUN SPARC */
-+#define EM_386 3 /* Intel 80386 */
-+#define EM_68K 4 /* Motorola m68k family */
-+#define EM_88K 5 /* Motorola m88k family */
-+#define EM_860 7 /* Intel 80860 */
-+#define EM_MIPS 8 /* MIPS R3000 big-endian */
-+#define EM_S370 9 /* IBM System/370 */
-+#define EM_MIPS_RS3_LE 10 /* MIPS R3000 little-endian */
-+
-+#define EM_PARISC 15 /* HPPA */
-+#define EM_VPP500 17 /* Fujitsu VPP500 */
-+#define EM_SPARC32PLUS 18 /* Sun's "v8plus" */
-+#define EM_960 19 /* Intel 80960 */
-+#define EM_PPC 20 /* PowerPC */
-+#define EM_PPC64 21 /* PowerPC 64-bit */
-+#define EM_S390 22 /* IBM S390 */
-+
-+#define EM_V800 36 /* NEC V800 series */
-+#define EM_FR20 37 /* Fujitsu FR20 */
-+#define EM_RH32 38 /* TRW RH-32 */
-+#define EM_RCE 39 /* Motorola RCE */
-+#define EM_ARM 40 /* ARM */
-+#define EM_FAKE_ALPHA 41 /* Digital Alpha */
-+#define EM_SH 42 /* Hitachi SH */
-+#define EM_SPARCV9 43 /* SPARC v9 64-bit */
-+#define EM_TRICORE 44 /* Siemens Tricore */
-+#define EM_ARC 45 /* Argonaut RISC Core */
-+#define EM_H8_300 46 /* Hitachi H8/300 */
-+#define EM_H8_300H 47 /* Hitachi H8/300H */
-+#define EM_H8S 48 /* Hitachi H8S */
-+#define EM_H8_500 49 /* Hitachi H8/500 */
-+#define EM_IA_64 50 /* Intel Merced */
-+#define EM_MIPS_X 51 /* Stanford MIPS-X */
-+#define EM_COLDFIRE 52 /* Motorola Coldfire */
-+#define EM_68HC12 53 /* Motorola M68HC12 */
-+#define EM_MMA 54 /* Fujitsu MMA Multimedia Accelerator*/
-+#define EM_PCP 55 /* Siemens PCP */
-+#define EM_NCPU 56 /* Sony nCPU embeeded RISC */
-+#define EM_NDR1 57 /* Denso NDR1 microprocessor */
-+#define EM_STARCORE 58 /* Motorola Start*Core processor */
-+#define EM_ME16 59 /* Toyota ME16 processor */
-+#define EM_ST100 60 /* STMicroelectronic ST100 processor */
-+#define EM_TINYJ 61 /* Advanced Logic Corp. Tinyj emb.fam*/
-+#define EM_X86_64 62 /* AMD x86-64 architecture */
-+#define EM_PDSP 63 /* Sony DSP Processor */
-+
-+#define EM_FX66 66 /* Siemens FX66 microcontroller */
-+#define EM_ST9PLUS 67 /* STMicroelectronics ST9+ 8/16 mc */
-+#define EM_ST7 68 /* STmicroelectronics ST7 8 bit mc */
-+#define EM_68HC16 69 /* Motorola MC68HC16 microcontroller */
-+#define EM_68HC11 70 /* Motorola MC68HC11 microcontroller */
-+#define EM_68HC08 71 /* Motorola MC68HC08 microcontroller */
-+#define EM_68HC05 72 /* Motorola MC68HC05 microcontroller */
-+#define EM_SVX 73 /* Silicon Graphics SVx */
-+#define EM_ST19 74 /* STMicroelectronics ST19 8 bit mc */
-+#define EM_VAX 75 /* Digital VAX */
-+#define EM_CRIS 76 /* Axis Communications 32-bit embedded processor */
-+#define EM_JAVELIN 77 /* Infineon Technologies 32-bit embedded processor */
-+#define EM_FIREPATH 78 /* Element 14 64-bit DSP Processor */
-+#define EM_ZSP 79 /* LSI Logic 16-bit DSP Processor */
-+#define EM_MMIX 80 /* Donald Knuth's educational 64-bit processor */
-+#define EM_HUANY 81 /* Harvard University machine-independent object files */
-+#define EM_PRISM 82 /* SiTera Prism */
-+#define EM_AVR 83 /* Atmel AVR 8-bit microcontroller */
-+#define EM_FR30 84 /* Fujitsu FR30 */
-+#define EM_D10V 85 /* Mitsubishi D10V */
-+#define EM_D30V 86 /* Mitsubishi D30V */
-+#define EM_V850 87 /* NEC v850 */
-+#define EM_M32R 88 /* Mitsubishi M32R */
-+#define EM_MN10300 89 /* Matsushita MN10300 */
-+#define EM_MN10200 90 /* Matsushita MN10200 */
-+#define EM_PJ 91 /* picoJava */
-+#define EM_OPENRISC 92 /* OpenRISC 32-bit embedded processor */
-+#define EM_ARC_A5 93 /* ARC Cores Tangent-A5 */
-+#define EM_XTENSA 94 /* Tensilica Xtensa Architecture */
-+#define EM_TILEPRO 188 /* Tilera TILEPro */
-+#define EM_TILEGX 191 /* Tilera TILE-Gx */
-+#define EM_NUM 192
-+
-+/* If it is necessary to assign new unofficial EM_* values, please
-+ pick large random numbers (0x8523, 0xa7f2, etc.) to minimize the
-+ chances of collision with official or non-GNU unofficial values. */
-+
-+#define EM_ALPHA 0x9026
-+
-+/* Legal values for e_version (version). */
-+
-+#define EV_NONE 0 /* Invalid ELF version */
-+#define EV_CURRENT 1 /* Current version */
-+#define EV_NUM 2
-+
-+/* Section header. */
-+
-+typedef struct
-+{
-+ Elf32_Word sh_name; /* Section name (string tbl index) */
-+ Elf32_Word sh_type; /* Section type */
-+ Elf32_Word sh_flags; /* Section flags */
-+ Elf32_Addr sh_addr; /* Section virtual addr at execution */
-+ Elf32_Off sh_offset; /* Section file offset */
-+ Elf32_Word sh_size; /* Section size in bytes */
-+ Elf32_Word sh_link; /* Link to another section */
-+ Elf32_Word sh_info; /* Additional section information */
-+ Elf32_Word sh_addralign; /* Section alignment */
-+ Elf32_Word sh_entsize; /* Entry size if section holds table */
-+} Elf32_Shdr;
-+
-+typedef struct
-+{
-+ Elf64_Word sh_name; /* Section name (string tbl index) */
-+ Elf64_Word sh_type; /* Section type */
-+ Elf64_Xword sh_flags; /* Section flags */
-+ Elf64_Addr sh_addr; /* Section virtual addr at execution */
-+ Elf64_Off sh_offset; /* Section file offset */
-+ Elf64_Xword sh_size; /* Section size in bytes */
-+ Elf64_Word sh_link; /* Link to another section */
-+ Elf64_Word sh_info; /* Additional section information */
-+ Elf64_Xword sh_addralign; /* Section alignment */
-+ Elf64_Xword sh_entsize; /* Entry size if section holds table */
-+} Elf64_Shdr;
-+
-+/* Special section indices. */
-+
-+#define SHN_UNDEF 0 /* Undefined section */
-+#define SHN_LORESERVE 0xff00 /* Start of reserved indices */
-+#define SHN_LOPROC 0xff00 /* Start of processor-specific */
-+#define SHN_BEFORE 0xff00 /* Order section before all others
-+ (Solaris). */
-+#define SHN_AFTER 0xff01 /* Order section after all others
-+ (Solaris). */
-+#define SHN_HIPROC 0xff1f /* End of processor-specific */
-+#define SHN_LOOS 0xff20 /* Start of OS-specific */
-+#define SHN_HIOS 0xff3f /* End of OS-specific */
-+#define SHN_ABS 0xfff1 /* Associated symbol is absolute */
-+#define SHN_COMMON 0xfff2 /* Associated symbol is common */
-+#define SHN_XINDEX 0xffff /* Index is in extra table. */
-+#define SHN_HIRESERVE 0xffff /* End of reserved indices */
-+
-+/* Legal values for sh_type (section type). */
-+
-+#define SHT_NULL 0 /* Section header table entry unused */
-+#define SHT_PROGBITS 1 /* Program data */
-+#define SHT_SYMTAB 2 /* Symbol table */
-+#define SHT_STRTAB 3 /* String table */
-+#define SHT_RELA 4 /* Relocation entries with addends */
-+#define SHT_HASH 5 /* Symbol hash table */
-+#define SHT_DYNAMIC 6 /* Dynamic linking information */
-+#define SHT_NOTE 7 /* Notes */
-+#define SHT_NOBITS 8 /* Program space with no data (bss) */
-+#define SHT_REL 9 /* Relocation entries, no addends */
-+#define SHT_SHLIB 10 /* Reserved */
-+#define SHT_DYNSYM 11 /* Dynamic linker symbol table */
-+#define SHT_INIT_ARRAY 14 /* Array of constructors */
-+#define SHT_FINI_ARRAY 15 /* Array of destructors */
-+#define SHT_PREINIT_ARRAY 16 /* Array of pre-constructors */
-+#define SHT_GROUP 17 /* Section group */
-+#define SHT_SYMTAB_SHNDX 18 /* Extended section indeces */
-+#define SHT_NUM 19 /* Number of defined types. */
-+#define SHT_LOOS 0x60000000 /* Start OS-specific. */
-+#define SHT_GNU_ATTRIBUTES 0x6ffffff5 /* Object attributes. */
-+#define SHT_GNU_HASH 0x6ffffff6 /* GNU-style hash table. */
-+#define SHT_GNU_LIBLIST 0x6ffffff7 /* Prelink library list */
-+#define SHT_CHECKSUM 0x6ffffff8 /* Checksum for DSO content. */
-+#define SHT_LOSUNW 0x6ffffffa /* Sun-specific low bound. */
-+#define SHT_SUNW_move 0x6ffffffa
-+#define SHT_SUNW_COMDAT 0x6ffffffb
-+#define SHT_SUNW_syminfo 0x6ffffffc
-+#define SHT_GNU_verdef 0x6ffffffd /* Version definition section. */
-+#define SHT_GNU_verneed 0x6ffffffe /* Version needs section. */
-+#define SHT_GNU_versym 0x6fffffff /* Version symbol table. */
-+#define SHT_HISUNW 0x6fffffff /* Sun-specific high bound. */
-+#define SHT_HIOS 0x6fffffff /* End OS-specific type */
-+#define SHT_LOPROC 0x70000000 /* Start of processor-specific */
-+#define SHT_HIPROC 0x7fffffff /* End of processor-specific */
-+#define SHT_LOUSER 0x80000000 /* Start of application-specific */
-+#define SHT_HIUSER 0x8fffffff /* End of application-specific */
-+
-+/* Legal values for sh_flags (section flags). */
-+
-+#define SHF_WRITE (1 << 0) /* Writable */
-+#define SHF_ALLOC (1 << 1) /* Occupies memory during execution */
-+#define SHF_EXECINSTR (1 << 2) /* Executable */
-+#define SHF_MERGE (1 << 4) /* Might be merged */
-+#define SHF_STRINGS (1 << 5) /* Contains nul-terminated strings */
-+#define SHF_INFO_LINK (1 << 6) /* `sh_info' contains SHT index */
-+#define SHF_LINK_ORDER (1 << 7) /* Preserve order after combining */
-+#define SHF_OS_NONCONFORMING (1 << 8) /* Non-standard OS specific handling
-+ required */
-+#define SHF_GROUP (1 << 9) /* Section is member of a group. */
-+#define SHF_TLS (1 << 10) /* Section hold thread-local data. */
-+#define SHF_MASKOS 0x0ff00000 /* OS-specific. */
-+#define SHF_MASKPROC 0xf0000000 /* Processor-specific */
-+#define SHF_ORDERED (1 << 30) /* Special ordering requirement
-+ (Solaris). */
-+#define SHF_EXCLUDE (1 << 31) /* Section is excluded unless
-+ referenced or allocated (Solaris).*/
-+
-+/* Section group handling. */
-+#define GRP_COMDAT 0x1 /* Mark group as COMDAT. */
-+
-+/* Symbol table entry. */
-+
-+typedef struct
-+{
-+ Elf32_Word st_name; /* Symbol name (string tbl index) */
-+ Elf32_Addr st_value; /* Symbol value */
-+ Elf32_Word st_size; /* Symbol size */
-+ unsigned char st_info; /* Symbol type and binding */
-+ unsigned char st_other; /* Symbol visibility */
-+ Elf32_Section st_shndx; /* Section index */
-+} Elf32_Sym;
-+
-+typedef struct
-+{
-+ Elf64_Word st_name; /* Symbol name (string tbl index) */
-+ unsigned char st_info; /* Symbol type and binding */
-+ unsigned char st_other; /* Symbol visibility */
-+ Elf64_Section st_shndx; /* Section index */
-+ Elf64_Addr st_value; /* Symbol value */
-+ Elf64_Xword st_size; /* Symbol size */
-+} Elf64_Sym;
-+
-+/* The syminfo section if available contains additional information about
-+ every dynamic symbol. */
-+
-+typedef struct
-+{
-+ Elf32_Half si_boundto; /* Direct bindings, symbol bound to */
-+ Elf32_Half si_flags; /* Per symbol flags */
-+} Elf32_Syminfo;
-+
-+typedef struct
-+{
-+ Elf64_Half si_boundto; /* Direct bindings, symbol bound to */
-+ Elf64_Half si_flags; /* Per symbol flags */
-+} Elf64_Syminfo;
-+
-+/* Possible values for si_boundto. */
-+#define SYMINFO_BT_SELF 0xffff /* Symbol bound to self */
-+#define SYMINFO_BT_PARENT 0xfffe /* Symbol bound to parent */
-+#define SYMINFO_BT_LOWRESERVE 0xff00 /* Beginning of reserved entries */
-+
-+/* Possible bitmasks for si_flags. */
-+#define SYMINFO_FLG_DIRECT 0x0001 /* Direct bound symbol */
-+#define SYMINFO_FLG_PASSTHRU 0x0002 /* Pass-thru symbol for translator */
-+#define SYMINFO_FLG_COPY 0x0004 /* Symbol is a copy-reloc */
-+#define SYMINFO_FLG_LAZYLOAD 0x0008 /* Symbol bound to object to be lazy
-+ loaded */
-+/* Syminfo version values. */
-+#define SYMINFO_NONE 0
-+#define SYMINFO_CURRENT 1
-+#define SYMINFO_NUM 2
-+
-+
-+/* How to extract and insert information held in the st_info field. */
-+
-+#define ELF32_ST_BIND(val) (((unsigned char) (val)) >> 4)
-+#define ELF32_ST_TYPE(val) ((val) & 0xf)
-+#define ELF32_ST_INFO(bind, type) (((bind) << 4) + ((type) & 0xf))
-+
-+/* Both Elf32_Sym and Elf64_Sym use the same one-byte st_info field. */
-+#define ELF64_ST_BIND(val) ELF32_ST_BIND (val)
-+#define ELF64_ST_TYPE(val) ELF32_ST_TYPE (val)
-+#define ELF64_ST_INFO(bind, type) ELF32_ST_INFO ((bind), (type))
-+
-+/* Legal values for ST_BIND subfield of st_info (symbol binding). */
-+
-+#define STB_LOCAL 0 /* Local symbol */
-+#define STB_GLOBAL 1 /* Global symbol */
-+#define STB_WEAK 2 /* Weak symbol */
-+#define STB_NUM 3 /* Number of defined types. */
-+#define STB_LOOS 10 /* Start of OS-specific */
-+#define STB_GNU_UNIQUE 10 /* Unique symbol. */
-+#define STB_HIOS 12 /* End of OS-specific */
-+#define STB_LOPROC 13 /* Start of processor-specific */
-+#define STB_HIPROC 15 /* End of processor-specific */
-+
-+/* Legal values for ST_TYPE subfield of st_info (symbol type). */
-+
-+#define STT_NOTYPE 0 /* Symbol type is unspecified */
-+#define STT_OBJECT 1 /* Symbol is a data object */
-+#define STT_FUNC 2 /* Symbol is a code object */
-+#define STT_SECTION 3 /* Symbol associated with a section */
-+#define STT_FILE 4 /* Symbol's name is file name */
-+#define STT_COMMON 5 /* Symbol is a common data object */
-+#define STT_TLS 6 /* Symbol is thread-local data object*/
-+#define STT_NUM 7 /* Number of defined types. */
-+#define STT_LOOS 10 /* Start of OS-specific */
-+#define STT_GNU_IFUNC 10 /* Symbol is indirect code object */
-+#define STT_HIOS 12 /* End of OS-specific */
-+#define STT_LOPROC 13 /* Start of processor-specific */
-+#define STT_HIPROC 15 /* End of processor-specific */
-+
-+
-+/* Symbol table indices are found in the hash buckets and chain table
-+ of a symbol hash table section. This special index value indicates
-+ the end of a chain, meaning no further symbols are found in that bucket. */
-+
-+#define STN_UNDEF 0 /* End of a chain. */
-+
-+
-+/* How to extract and insert information held in the st_other field. */
-+
-+#define ELF32_ST_VISIBILITY(o) ((o) & 0x03)
-+
-+/* For ELF64 the definitions are the same. */
-+#define ELF64_ST_VISIBILITY(o) ELF32_ST_VISIBILITY (o)
-+
-+/* Symbol visibility specification encoded in the st_other field. */
-+#define STV_DEFAULT 0 /* Default symbol visibility rules */
-+#define STV_INTERNAL 1 /* Processor specific hidden class */
-+#define STV_HIDDEN 2 /* Sym unavailable in other modules */
-+#define STV_PROTECTED 3 /* Not preemptible, not exported */
-+
-+
-+/* Relocation table entry without addend (in section of type SHT_REL). */
-+
-+typedef struct
-+{
-+ Elf32_Addr r_offset; /* Address */
-+ Elf32_Word r_info; /* Relocation type and symbol index */
-+} Elf32_Rel;
-+
-+/* I have seen two different definitions of the Elf64_Rel and
-+ Elf64_Rela structures, so we'll leave them out until Novell (or
-+ whoever) gets their act together. */
-+/* The following, at least, is used on Sparc v9, MIPS, and Alpha. */
-+
-+typedef struct
-+{
-+ Elf64_Addr r_offset; /* Address */
-+ Elf64_Xword r_info; /* Relocation type and symbol index */
-+} Elf64_Rel;
-+
-+/* Relocation table entry with addend (in section of type SHT_RELA). */
-+
-+typedef struct
-+{
-+ Elf32_Addr r_offset; /* Address */
-+ Elf32_Word r_info; /* Relocation type and symbol index */
-+ Elf32_Sword r_addend; /* Addend */
-+} Elf32_Rela;
-+
-+typedef struct
-+{
-+ Elf64_Addr r_offset; /* Address */
-+ Elf64_Xword r_info; /* Relocation type and symbol index */
-+ Elf64_Sxword r_addend; /* Addend */
-+} Elf64_Rela;
-+
-+/* How to extract and insert information held in the r_info field. */
-+
-+#define ELF32_R_SYM(val) ((val) >> 8)
-+#define ELF32_R_TYPE(val) ((val) & 0xff)
-+#define ELF32_R_INFO(sym, type) (((sym) << 8) + ((type) & 0xff))
-+
-+#define ELF64_R_SYM(i) ((i) >> 32)
-+#define ELF64_R_TYPE(i) ((i) & 0xffffffff)
-+#define ELF64_R_INFO(sym,type) ((((Elf64_Xword) (sym)) << 32) + (type))
-+
-+/* Program segment header. */
-+
-+typedef struct
-+{
-+ Elf32_Word p_type; /* Segment type */
-+ Elf32_Off p_offset; /* Segment file offset */
-+ Elf32_Addr p_vaddr; /* Segment virtual address */
-+ Elf32_Addr p_paddr; /* Segment physical address */
-+ Elf32_Word p_filesz; /* Segment size in file */
-+ Elf32_Word p_memsz; /* Segment size in memory */
-+ Elf32_Word p_flags; /* Segment flags */
-+ Elf32_Word p_align; /* Segment alignment */
-+} Elf32_Phdr;
-+
-+typedef struct
-+{
-+ Elf64_Word p_type; /* Segment type */
-+ Elf64_Word p_flags; /* Segment flags */
-+ Elf64_Off p_offset; /* Segment file offset */
-+ Elf64_Addr p_vaddr; /* Segment virtual address */
-+ Elf64_Addr p_paddr; /* Segment physical address */
-+ Elf64_Xword p_filesz; /* Segment size in file */
-+ Elf64_Xword p_memsz; /* Segment size in memory */
-+ Elf64_Xword p_align; /* Segment alignment */
-+} Elf64_Phdr;
-+
-+/* Special value for e_phnum. This indicates that the real number of
-+ program headers is too large to fit into e_phnum. Instead the real
-+ value is in the field sh_info of section 0. */
-+
-+#define PN_XNUM 0xffff
-+
-+/* Legal values for p_type (segment type). */
-+
-+#define PT_NULL 0 /* Program header table entry unused */
-+#define PT_LOAD 1 /* Loadable program segment */
-+#define PT_DYNAMIC 2 /* Dynamic linking information */
-+#define PT_INTERP 3 /* Program interpreter */
-+#define PT_NOTE 4 /* Auxiliary information */
-+#define PT_SHLIB 5 /* Reserved */
-+#define PT_PHDR 6 /* Entry for header table itself */
-+#define PT_TLS 7 /* Thread-local storage segment */
-+#define PT_NUM 8 /* Number of defined types */
-+#define PT_LOOS 0x60000000 /* Start of OS-specific */
-+#define PT_GNU_EH_FRAME 0x6474e550 /* GCC .eh_frame_hdr segment */
-+#define PT_GNU_STACK 0x6474e551 /* Indicates stack executability */
-+#define PT_GNU_RELRO 0x6474e552 /* Read-only after relocation */
-+#define PT_LOSUNW 0x6ffffffa
-+#define PT_SUNWBSS 0x6ffffffa /* Sun Specific segment */
-+#define PT_SUNWSTACK 0x6ffffffb /* Stack segment */
-+#define PT_HISUNW 0x6fffffff
-+#define PT_HIOS 0x6fffffff /* End of OS-specific */
-+#define PT_LOPROC 0x70000000 /* Start of processor-specific */
-+#define PT_HIPROC 0x7fffffff /* End of processor-specific */
-+
-+/* Legal values for p_flags (segment flags). */
-+
-+#define PF_X (1 << 0) /* Segment is executable */
-+#define PF_W (1 << 1) /* Segment is writable */
-+#define PF_R (1 << 2) /* Segment is readable */
-+#define PF_MASKOS 0x0ff00000 /* OS-specific */
-+#define PF_MASKPROC 0xf0000000 /* Processor-specific */
-+
-+/* Legal values for note segment descriptor types for core files. */
-+
-+#define NT_PRSTATUS 1 /* Contains copy of prstatus struct */
-+#define NT_FPREGSET 2 /* Contains copy of fpregset struct */
-+#define NT_PRPSINFO 3 /* Contains copy of prpsinfo struct */
-+#define NT_PRXREG 4 /* Contains copy of prxregset struct */
-+#define NT_TASKSTRUCT 4 /* Contains copy of task structure */
-+#define NT_PLATFORM 5 /* String from sysinfo(SI_PLATFORM) */
-+#define NT_AUXV 6 /* Contains copy of auxv array */
-+#define NT_GWINDOWS 7 /* Contains copy of gwindows struct */
-+#define NT_ASRS 8 /* Contains copy of asrset struct */
-+#define NT_PSTATUS 10 /* Contains copy of pstatus struct */
-+#define NT_PSINFO 13 /* Contains copy of psinfo struct */
-+#define NT_PRCRED 14 /* Contains copy of prcred struct */
-+#define NT_UTSNAME 15 /* Contains copy of utsname struct */
-+#define NT_LWPSTATUS 16 /* Contains copy of lwpstatus struct */
-+#define NT_LWPSINFO 17 /* Contains copy of lwpinfo struct */
-+#define NT_PRFPXREG 20 /* Contains copy of fprxregset struct */
-+#define NT_PRXFPREG 0x46e62b7f /* Contains copy of user_fxsr_struct */
-+#define NT_PPC_VMX 0x100 /* PowerPC Altivec/VMX registers */
-+#define NT_PPC_SPE 0x101 /* PowerPC SPE/EVR registers */
-+#define NT_PPC_VSX 0x102 /* PowerPC VSX registers */
-+#define NT_386_TLS 0x200 /* i386 TLS slots (struct user_desc) */
-+#define NT_386_IOPERM 0x201 /* x86 io permission bitmap (1=deny) */
-+#define NT_X86_XSTATE 0x202 /* x86 extended state using xsave */
-+
-+/* Legal values for the note segment descriptor types for object files. */
-+
-+#define NT_VERSION 1 /* Contains a version string. */
-+
-+
-+/* Dynamic section entry. */
-+
-+typedef struct
-+{
-+ Elf32_Sword d_tag; /* Dynamic entry type */
-+ union
-+ {
-+ Elf32_Word d_val; /* Integer value */
-+ Elf32_Addr d_ptr; /* Address value */
-+ } d_un;
-+} Elf32_Dyn;
-+
-+typedef struct
-+{
-+ Elf64_Sxword d_tag; /* Dynamic entry type */
-+ union
-+ {
-+ Elf64_Xword d_val; /* Integer value */
-+ Elf64_Addr d_ptr; /* Address value */
-+ } d_un;
-+} Elf64_Dyn;
-+
-+/* Legal values for d_tag (dynamic entry type). */
-+
-+#define DT_NULL 0 /* Marks end of dynamic section */
-+#define DT_NEEDED 1 /* Name of needed library */
-+#define DT_PLTRELSZ 2 /* Size in bytes of PLT relocs */
-+#define DT_PLTGOT 3 /* Processor defined value */
-+#define DT_HASH 4 /* Address of symbol hash table */
-+#define DT_STRTAB 5 /* Address of string table */
-+#define DT_SYMTAB 6 /* Address of symbol table */
-+#define DT_RELA 7 /* Address of Rela relocs */
-+#define DT_RELASZ 8 /* Total size of Rela relocs */
-+#define DT_RELAENT 9 /* Size of one Rela reloc */
-+#define DT_STRSZ 10 /* Size of string table */
-+#define DT_SYMENT 11 /* Size of one symbol table entry */
-+#define DT_INIT 12 /* Address of init function */
-+#define DT_FINI 13 /* Address of termination function */
-+#define DT_SONAME 14 /* Name of shared object */
-+#define DT_RPATH 15 /* Library search path (deprecated) */
-+#define DT_SYMBOLIC 16 /* Start symbol search here */
-+#define DT_REL 17 /* Address of Rel relocs */
-+#define DT_RELSZ 18 /* Total size of Rel relocs */
-+#define DT_RELENT 19 /* Size of one Rel reloc */
-+#define DT_PLTREL 20 /* Type of reloc in PLT */
-+#define DT_DEBUG 21 /* For debugging; unspecified */
-+#define DT_TEXTREL 22 /* Reloc might modify .text */
-+#define DT_JMPREL 23 /* Address of PLT relocs */
-+#define DT_BIND_NOW 24 /* Process relocations of object */
-+#define DT_INIT_ARRAY 25 /* Array with addresses of init fct */
-+#define DT_FINI_ARRAY 26 /* Array with addresses of fini fct */
-+#define DT_INIT_ARRAYSZ 27 /* Size in bytes of DT_INIT_ARRAY */
-+#define DT_FINI_ARRAYSZ 28 /* Size in bytes of DT_FINI_ARRAY */
-+#define DT_RUNPATH 29 /* Library search path */
-+#define DT_FLAGS 30 /* Flags for the object being loaded */
-+#define DT_ENCODING 32 /* Start of encoded range */
-+#define DT_PREINIT_ARRAY 32 /* Array with addresses of preinit fct*/
-+#define DT_PREINIT_ARRAYSZ 33 /* size in bytes of DT_PREINIT_ARRAY */
-+#define DT_NUM 34 /* Number used */
-+#define DT_LOOS 0x6000000d /* Start of OS-specific */
-+#define DT_HIOS 0x6ffff000 /* End of OS-specific */
-+#define DT_LOPROC 0x70000000 /* Start of processor-specific */
-+#define DT_HIPROC 0x7fffffff /* End of processor-specific */
-+#define DT_PROCNUM DT_MIPS_NUM /* Most used by any processor */
-+
-+/* DT_* entries which fall between DT_VALRNGHI & DT_VALRNGLO use the
-+ Dyn.d_un.d_val field of the Elf*_Dyn structure. This follows Sun's
-+ approach. */
-+#define DT_VALRNGLO 0x6ffffd00
-+#define DT_GNU_PRELINKED 0x6ffffdf5 /* Prelinking timestamp */
-+#define DT_GNU_CONFLICTSZ 0x6ffffdf6 /* Size of conflict section */
-+#define DT_GNU_LIBLISTSZ 0x6ffffdf7 /* Size of library list */
-+#define DT_CHECKSUM 0x6ffffdf8
-+#define DT_PLTPADSZ 0x6ffffdf9
-+#define DT_MOVEENT 0x6ffffdfa
-+#define DT_MOVESZ 0x6ffffdfb
-+#define DT_FEATURE_1 0x6ffffdfc /* Feature selection (DTF_*). */
-+#define DT_POSFLAG_1 0x6ffffdfd /* Flags for DT_* entries, effecting
-+ the following DT_* entry. */
-+#define DT_SYMINSZ 0x6ffffdfe /* Size of syminfo table (in bytes) */
-+#define DT_SYMINENT 0x6ffffdff /* Entry size of syminfo */
-+#define DT_VALRNGHI 0x6ffffdff
-+#define DT_VALTAGIDX(tag) (DT_VALRNGHI - (tag)) /* Reverse order! */
-+#define DT_VALNUM 12
-+
-+/* DT_* entries which fall between DT_ADDRRNGHI & DT_ADDRRNGLO use the
-+ Dyn.d_un.d_ptr field of the Elf*_Dyn structure.
-+
-+ If any adjustment is made to the ELF object after it has been
-+ built these entries will need to be adjusted. */
-+#define DT_ADDRRNGLO 0x6ffffe00
-+#define DT_GNU_HASH 0x6ffffef5 /* GNU-style hash table. */
-+#define DT_TLSDESC_PLT 0x6ffffef6
-+#define DT_TLSDESC_GOT 0x6ffffef7
-+#define DT_GNU_CONFLICT 0x6ffffef8 /* Start of conflict section */
-+#define DT_GNU_LIBLIST 0x6ffffef9 /* Library list */
-+#define DT_CONFIG 0x6ffffefa /* Configuration information. */
-+#define DT_DEPAUDIT 0x6ffffefb /* Dependency auditing. */
-+#define DT_AUDIT 0x6ffffefc /* Object auditing. */
-+#define DT_PLTPAD 0x6ffffefd /* PLT padding. */
-+#define DT_MOVETAB 0x6ffffefe /* Move table. */
-+#define DT_SYMINFO 0x6ffffeff /* Syminfo table. */
-+#define DT_ADDRRNGHI 0x6ffffeff
-+#define DT_ADDRTAGIDX(tag) (DT_ADDRRNGHI - (tag)) /* Reverse order! */
-+#define DT_ADDRNUM 11
-+
-+/* The versioning entry types. The next are defined as part of the
-+ GNU extension. */
-+#define DT_VERSYM 0x6ffffff0
-+
-+#define DT_RELACOUNT 0x6ffffff9
-+#define DT_RELCOUNT 0x6ffffffa
-+
-+/* These were chosen by Sun. */
-+#define DT_FLAGS_1 0x6ffffffb /* State flags, see DF_1_* below. */
-+#define DT_VERDEF 0x6ffffffc /* Address of version definition
-+ table */
-+#define DT_VERDEFNUM 0x6ffffffd /* Number of version definitions */
-+#define DT_VERNEED 0x6ffffffe /* Address of table with needed
-+ versions */
-+#define DT_VERNEEDNUM 0x6fffffff /* Number of needed versions */
-+#define DT_VERSIONTAGIDX(tag) (DT_VERNEEDNUM - (tag)) /* Reverse order! */
-+#define DT_VERSIONTAGNUM 16
-+
-+/* Sun added these machine-independent extensions in the "processor-specific"
-+ range. Be compatible. */
-+#define DT_AUXILIARY 0x7ffffffd /* Shared object to load before self */
-+#define DT_FILTER 0x7fffffff /* Shared object to get values from */
-+#define DT_EXTRATAGIDX(tag) ((Elf32_Word)-((Elf32_Sword) (tag) <<1>>1)-1)
-+#define DT_EXTRANUM 3
-+
-+/* Values of `d_un.d_val' in the DT_FLAGS entry. */
-+#define DF_ORIGIN 0x00000001 /* Object may use DF_ORIGIN */
-+#define DF_SYMBOLIC 0x00000002 /* Symbol resolutions starts here */
-+#define DF_TEXTREL 0x00000004 /* Object contains text relocations */
-+#define DF_BIND_NOW 0x00000008 /* No lazy binding for this object */
-+#define DF_STATIC_TLS 0x00000010 /* Module uses the static TLS model */
-+
-+/* State flags selectable in the `d_un.d_val' element of the DT_FLAGS_1
-+ entry in the dynamic section. */
-+#define DF_1_NOW 0x00000001 /* Set RTLD_NOW for this object. */
-+#define DF_1_GLOBAL 0x00000002 /* Set RTLD_GLOBAL for this object. */
-+#define DF_1_GROUP 0x00000004 /* Set RTLD_GROUP for this object. */
-+#define DF_1_NODELETE 0x00000008 /* Set RTLD_NODELETE for this object.*/
-+#define DF_1_LOADFLTR 0x00000010 /* Trigger filtee loading at runtime.*/
-+#define DF_1_INITFIRST 0x00000020 /* Set RTLD_INITFIRST for this object*/
-+#define DF_1_NOOPEN 0x00000040 /* Set RTLD_NOOPEN for this object. */
-+#define DF_1_ORIGIN 0x00000080 /* $ORIGIN must be handled. */
-+#define DF_1_DIRECT 0x00000100 /* Direct binding enabled. */
-+#define DF_1_TRANS 0x00000200
-+#define DF_1_INTERPOSE 0x00000400 /* Object is used to interpose. */
-+#define DF_1_NODEFLIB 0x00000800 /* Ignore default lib search path. */
-+#define DF_1_NODUMP 0x00001000 /* Object can't be dldump'ed. */
-+#define DF_1_CONFALT 0x00002000 /* Configuration alternative created.*/
-+#define DF_1_ENDFILTEE 0x00004000 /* Filtee terminates filters search. */
-+#define DF_1_DISPRELDNE 0x00008000 /* Disp reloc applied at build time. */
-+#define DF_1_DISPRELPND 0x00010000 /* Disp reloc applied at run-time. */
-+
-+/* Flags for the feature selection in DT_FEATURE_1. */
-+#define DTF_1_PARINIT 0x00000001
-+#define DTF_1_CONFEXP 0x00000002
-+
-+/* Flags in the DT_POSFLAG_1 entry effecting only the next DT_* entry. */
-+#define DF_P1_LAZYLOAD 0x00000001 /* Lazyload following object. */
-+#define DF_P1_GROUPPERM 0x00000002 /* Symbols from next object are not
-+ generally available. */
-+
-+/* Version definition sections. */
-+
-+typedef struct
-+{
-+ Elf32_Half vd_version; /* Version revision */
-+ Elf32_Half vd_flags; /* Version information */
-+ Elf32_Half vd_ndx; /* Version Index */
-+ Elf32_Half vd_cnt; /* Number of associated aux entries */
-+ Elf32_Word vd_hash; /* Version name hash value */
-+ Elf32_Word vd_aux; /* Offset in bytes to verdaux array */
-+ Elf32_Word vd_next; /* Offset in bytes to next verdef
-+ entry */
-+} Elf32_Verdef;
-+
-+typedef struct
-+{
-+ Elf64_Half vd_version; /* Version revision */
-+ Elf64_Half vd_flags; /* Version information */
-+ Elf64_Half vd_ndx; /* Version Index */
-+ Elf64_Half vd_cnt; /* Number of associated aux entries */
-+ Elf64_Word vd_hash; /* Version name hash value */
-+ Elf64_Word vd_aux; /* Offset in bytes to verdaux array */
-+ Elf64_Word vd_next; /* Offset in bytes to next verdef
-+ entry */
-+} Elf64_Verdef;
-+
-+
-+/* Legal values for vd_version (version revision). */
-+#define VER_DEF_NONE 0 /* No version */
-+#define VER_DEF_CURRENT 1 /* Current version */
-+#define VER_DEF_NUM 2 /* Given version number */
-+
-+/* Legal values for vd_flags (version information flags). */
-+#define VER_FLG_BASE 0x1 /* Version definition of file itself */
-+#define VER_FLG_WEAK 0x2 /* Weak version identifier */
-+
-+/* Versym symbol index values. */
-+#define VER_NDX_LOCAL 0 /* Symbol is local. */
-+#define VER_NDX_GLOBAL 1 /* Symbol is global. */
-+#define VER_NDX_LORESERVE 0xff00 /* Beginning of reserved entries. */
-+#define VER_NDX_ELIMINATE 0xff01 /* Symbol is to be eliminated. */
-+
-+/* Auxialiary version information. */
-+
-+typedef struct
-+{
-+ Elf32_Word vda_name; /* Version or dependency names */
-+ Elf32_Word vda_next; /* Offset in bytes to next verdaux
-+ entry */
-+} Elf32_Verdaux;
-+
-+typedef struct
-+{
-+ Elf64_Word vda_name; /* Version or dependency names */
-+ Elf64_Word vda_next; /* Offset in bytes to next verdaux
-+ entry */
-+} Elf64_Verdaux;
-+
-+
-+/* Version dependency section. */
-+
-+typedef struct
-+{
-+ Elf32_Half vn_version; /* Version of structure */
-+ Elf32_Half vn_cnt; /* Number of associated aux entries */
-+ Elf32_Word vn_file; /* Offset of filename for this
-+ dependency */
-+ Elf32_Word vn_aux; /* Offset in bytes to vernaux array */
-+ Elf32_Word vn_next; /* Offset in bytes to next verneed
-+ entry */
-+} Elf32_Verneed;
-+
-+typedef struct
-+{
-+ Elf64_Half vn_version; /* Version of structure */
-+ Elf64_Half vn_cnt; /* Number of associated aux entries */
-+ Elf64_Word vn_file; /* Offset of filename for this
-+ dependency */
-+ Elf64_Word vn_aux; /* Offset in bytes to vernaux array */
-+ Elf64_Word vn_next; /* Offset in bytes to next verneed
-+ entry */
-+} Elf64_Verneed;
-+
-+
-+/* Legal values for vn_version (version revision). */
-+#define VER_NEED_NONE 0 /* No version */
-+#define VER_NEED_CURRENT 1 /* Current version */
-+#define VER_NEED_NUM 2 /* Given version number */
-+
-+/* Auxiliary needed version information. */
-+
-+typedef struct
-+{
-+ Elf32_Word vna_hash; /* Hash value of dependency name */
-+ Elf32_Half vna_flags; /* Dependency specific information */
-+ Elf32_Half vna_other; /* Unused */
-+ Elf32_Word vna_name; /* Dependency name string offset */
-+ Elf32_Word vna_next; /* Offset in bytes to next vernaux
-+ entry */
-+} Elf32_Vernaux;
-+
-+typedef struct
-+{
-+ Elf64_Word vna_hash; /* Hash value of dependency name */
-+ Elf64_Half vna_flags; /* Dependency specific information */
-+ Elf64_Half vna_other; /* Unused */
-+ Elf64_Word vna_name; /* Dependency name string offset */
-+ Elf64_Word vna_next; /* Offset in bytes to next vernaux
-+ entry */
-+} Elf64_Vernaux;
-+
-+
-+/* Legal values for vna_flags. */
-+#define VER_FLG_WEAK 0x2 /* Weak version identifier */
-+
-+
-+/* Auxiliary vector. */
-+
-+/* This vector is normally only used by the program interpreter. The
-+ usual definition in an ABI supplement uses the name auxv_t. The
-+ vector is not usually defined in a standard <elf.h> file, but it
-+ can't hurt. We rename it to avoid conflicts. The sizes of these
-+ types are an arrangement between the exec server and the program
-+ interpreter, so we don't fully specify them here. */
-+
-+typedef struct
-+{
-+ uint32_t a_type; /* Entry type */
-+ union
-+ {
-+ uint32_t a_val; /* Integer value */
-+ /* We use to have pointer elements added here. We cannot do that,
-+ though, since it does not work when using 32-bit definitions
-+ on 64-bit platforms and vice versa. */
-+ } a_un;
-+} Elf32_auxv_t;
-+
-+typedef struct
-+{
-+ uint64_t a_type; /* Entry type */
-+ union
-+ {
-+ uint64_t a_val; /* Integer value */
-+ /* We use to have pointer elements added here. We cannot do that,
-+ though, since it does not work when using 32-bit definitions
-+ on 64-bit platforms and vice versa. */
-+ } a_un;
-+} Elf64_auxv_t;
-+
-+/* Legal values for a_type (entry type). */
-+
-+#define AT_NULL 0 /* End of vector */
-+#define AT_IGNORE 1 /* Entry should be ignored */
-+#define AT_EXECFD 2 /* File descriptor of program */
-+#define AT_PHDR 3 /* Program headers for program */
-+#define AT_PHENT 4 /* Size of program header entry */
-+#define AT_PHNUM 5 /* Number of program headers */
-+#define AT_PAGESZ 6 /* System page size */
-+#define AT_BASE 7 /* Base address of interpreter */
-+#define AT_FLAGS 8 /* Flags */
-+#define AT_ENTRY 9 /* Entry point of program */
-+#define AT_NOTELF 10 /* Program is not ELF */
-+#define AT_UID 11 /* Real uid */
-+#define AT_EUID 12 /* Effective uid */
-+#define AT_GID 13 /* Real gid */
-+#define AT_EGID 14 /* Effective gid */
-+#define AT_CLKTCK 17 /* Frequency of times() */
-+
-+/* Some more special a_type values describing the hardware. */
-+#define AT_PLATFORM 15 /* String identifying platform. */
-+#define AT_HWCAP 16 /* Machine dependent hints about
-+ processor capabilities. */
-+
-+/* This entry gives some information about the FPU initialization
-+ performed by the kernel. */
-+#define AT_FPUCW 18 /* Used FPU control word. */
-+
-+/* Cache block sizes. */
-+#define AT_DCACHEBSIZE 19 /* Data cache block size. */
-+#define AT_ICACHEBSIZE 20 /* Instruction cache block size. */
-+#define AT_UCACHEBSIZE 21 /* Unified cache block size. */
-+
-+/* A special ignored value for PPC, used by the kernel to control the
-+ interpretation of the AUXV. Must be > 16. */
-+#define AT_IGNOREPPC 22 /* Entry should be ignored. */
-+
-+#define AT_SECURE 23 /* Boolean, was exec setuid-like? */
-+
-+#define AT_BASE_PLATFORM 24 /* String identifying real platforms.*/
-+
-+#define AT_RANDOM 25 /* Address of 16 random bytes. */
-+
-+#define AT_EXECFN 31 /* Filename of executable. */
-+
-+/* Pointer to the global system page used for system calls and other
-+ nice things. */
-+#define AT_SYSINFO 32
-+#define AT_SYSINFO_EHDR 33
-+
-+/* Shapes of the caches. Bits 0-3 contains associativity; bits 4-7 contains
-+ log2 of line size; mask those to get cache size. */
-+#define AT_L1I_CACHESHAPE 34
-+#define AT_L1D_CACHESHAPE 35
-+#define AT_L2_CACHESHAPE 36
-+#define AT_L3_CACHESHAPE 37
-+
-+/* Note section contents. Each entry in the note section begins with
-+ a header of a fixed form. */
-+
-+typedef struct
-+{
-+ Elf32_Word n_namesz; /* Length of the note's name. */
-+ Elf32_Word n_descsz; /* Length of the note's descriptor. */
-+ Elf32_Word n_type; /* Type of the note. */
-+} Elf32_Nhdr;
-+
-+typedef struct
-+{
-+ Elf64_Word n_namesz; /* Length of the note's name. */
-+ Elf64_Word n_descsz; /* Length of the note's descriptor. */
-+ Elf64_Word n_type; /* Type of the note. */
-+} Elf64_Nhdr;
-+
-+/* Known names of notes. */
-+
-+/* Solaris entries in the note section have this name. */
-+#define ELF_NOTE_SOLARIS "SUNW Solaris"
-+
-+/* Note entries for GNU systems have this name. */
-+#define ELF_NOTE_GNU "GNU"
-+
-+
-+/* Defined types of notes for Solaris. */
-+
-+/* Value of descriptor (one word) is desired pagesize for the binary. */
-+#define ELF_NOTE_PAGESIZE_HINT 1
-+
-+
-+/* Defined note types for GNU systems. */
-+
-+/* ABI information. The descriptor consists of words:
-+ word 0: OS descriptor
-+ word 1: major version of the ABI
-+ word 2: minor version of the ABI
-+ word 3: subminor version of the ABI
-+*/
-+#define NT_GNU_ABI_TAG 1
-+#define ELF_NOTE_ABI NT_GNU_ABI_TAG /* Old name. */
-+
-+/* Known OSes. These values can appear in word 0 of an
-+ NT_GNU_ABI_TAG note section entry. */
-+#define ELF_NOTE_OS_LINUX 0
-+#define ELF_NOTE_OS_GNU 1
-+#define ELF_NOTE_OS_SOLARIS2 2
-+#define ELF_NOTE_OS_FREEBSD 3
-+
-+/* Synthetic hwcap information. The descriptor begins with two words:
-+ word 0: number of entries
-+ word 1: bitmask of enabled entries
-+ Then follow variable-length entries, one byte followed by a
-+ '\0'-terminated hwcap name string. The byte gives the bit
-+ number to test if enabled, (1U << bit) & bitmask. */
-+#define NT_GNU_HWCAP 2
-+
-+/* Build ID bits as generated by ld --build-id.
-+ The descriptor consists of any nonzero number of bytes. */
-+#define NT_GNU_BUILD_ID 3
-+
-+/* Version note generated by GNU gold containing a version string. */
-+#define NT_GNU_GOLD_VERSION 4
-+
-+
-+/* Move records. */
-+typedef struct
-+{
-+ Elf32_Xword m_value; /* Symbol value. */
-+ Elf32_Word m_info; /* Size and index. */
-+ Elf32_Word m_poffset; /* Symbol offset. */
-+ Elf32_Half m_repeat; /* Repeat count. */
-+ Elf32_Half m_stride; /* Stride info. */
-+} Elf32_Move;
-+
-+typedef struct
-+{
-+ Elf64_Xword m_value; /* Symbol value. */
-+ Elf64_Xword m_info; /* Size and index. */
-+ Elf64_Xword m_poffset; /* Symbol offset. */
-+ Elf64_Half m_repeat; /* Repeat count. */
-+ Elf64_Half m_stride; /* Stride info. */
-+} Elf64_Move;
-+
-+/* Macro to construct move records. */
-+#define ELF32_M_SYM(info) ((info) >> 8)
-+#define ELF32_M_SIZE(info) ((unsigned char) (info))
-+#define ELF32_M_INFO(sym, size) (((sym) << 8) + (unsigned char) (size))
-+
-+#define ELF64_M_SYM(info) ELF32_M_SYM (info)
-+#define ELF64_M_SIZE(info) ELF32_M_SIZE (info)
-+#define ELF64_M_INFO(sym, size) ELF32_M_INFO (sym, size)
-+
-+
-+/* Motorola 68k specific definitions. */
-+
-+/* Values for Elf32_Ehdr.e_flags. */
-+#define EF_CPU32 0x00810000
-+
-+/* m68k relocs. */
-+
-+#define R_68K_NONE 0 /* No reloc */
-+#define R_68K_32 1 /* Direct 32 bit */
-+#define R_68K_16 2 /* Direct 16 bit */
-+#define R_68K_8 3 /* Direct 8 bit */
-+#define R_68K_PC32 4 /* PC relative 32 bit */
-+#define R_68K_PC16 5 /* PC relative 16 bit */
-+#define R_68K_PC8 6 /* PC relative 8 bit */
-+#define R_68K_GOT32 7 /* 32 bit PC relative GOT entry */
-+#define R_68K_GOT16 8 /* 16 bit PC relative GOT entry */
-+#define R_68K_GOT8 9 /* 8 bit PC relative GOT entry */
-+#define R_68K_GOT32O 10 /* 32 bit GOT offset */
-+#define R_68K_GOT16O 11 /* 16 bit GOT offset */
-+#define R_68K_GOT8O 12 /* 8 bit GOT offset */
-+#define R_68K_PLT32 13 /* 32 bit PC relative PLT address */
-+#define R_68K_PLT16 14 /* 16 bit PC relative PLT address */
-+#define R_68K_PLT8 15 /* 8 bit PC relative PLT address */
-+#define R_68K_PLT32O 16 /* 32 bit PLT offset */
-+#define R_68K_PLT16O 17 /* 16 bit PLT offset */
-+#define R_68K_PLT8O 18 /* 8 bit PLT offset */
-+#define R_68K_COPY 19 /* Copy symbol at runtime */
-+#define R_68K_GLOB_DAT 20 /* Create GOT entry */
-+#define R_68K_JMP_SLOT 21 /* Create PLT entry */
-+#define R_68K_RELATIVE 22 /* Adjust by program base */
-+#define R_68K_TLS_GD32 25 /* 32 bit GOT offset for GD */
-+#define R_68K_TLS_GD16 26 /* 16 bit GOT offset for GD */
-+#define R_68K_TLS_GD8 27 /* 8 bit GOT offset for GD */
-+#define R_68K_TLS_LDM32 28 /* 32 bit GOT offset for LDM */
-+#define R_68K_TLS_LDM16 29 /* 16 bit GOT offset for LDM */
-+#define R_68K_TLS_LDM8 30 /* 8 bit GOT offset for LDM */
-+#define R_68K_TLS_LDO32 31 /* 32 bit module-relative offset */
-+#define R_68K_TLS_LDO16 32 /* 16 bit module-relative offset */
-+#define R_68K_TLS_LDO8 33 /* 8 bit module-relative offset */
-+#define R_68K_TLS_IE32 34 /* 32 bit GOT offset for IE */
-+#define R_68K_TLS_IE16 35 /* 16 bit GOT offset for IE */
-+#define R_68K_TLS_IE8 36 /* 8 bit GOT offset for IE */
-+#define R_68K_TLS_LE32 37 /* 32 bit offset relative to
-+ static TLS block */
-+#define R_68K_TLS_LE16 38 /* 16 bit offset relative to
-+ static TLS block */
-+#define R_68K_TLS_LE8 39 /* 8 bit offset relative to
-+ static TLS block */
-+#define R_68K_TLS_DTPMOD32 40 /* 32 bit module number */
-+#define R_68K_TLS_DTPREL32 41 /* 32 bit module-relative offset */
-+#define R_68K_TLS_TPREL32 42 /* 32 bit TP-relative offset */
-+/* Keep this the last entry. */
-+#define R_68K_NUM 43
-+
-+/* Intel 80386 specific definitions. */
-+
-+/* i386 relocs. */
-+
-+#define R_386_NONE 0 /* No reloc */
-+#define R_386_32 1 /* Direct 32 bit */
-+#define R_386_PC32 2 /* PC relative 32 bit */
-+#define R_386_GOT32 3 /* 32 bit GOT entry */
-+#define R_386_PLT32 4 /* 32 bit PLT address */
-+#define R_386_COPY 5 /* Copy symbol at runtime */
-+#define R_386_GLOB_DAT 6 /* Create GOT entry */
-+#define R_386_JMP_SLOT 7 /* Create PLT entry */
-+#define R_386_RELATIVE 8 /* Adjust by program base */
-+#define R_386_GOTOFF 9 /* 32 bit offset to GOT */
-+#define R_386_GOTPC 10 /* 32 bit PC relative offset to GOT */
-+#define R_386_32PLT 11
-+#define R_386_TLS_TPOFF 14 /* Offset in static TLS block */
-+#define R_386_TLS_IE 15 /* Address of GOT entry for static TLS
-+ block offset */
-+#define R_386_TLS_GOTIE 16 /* GOT entry for static TLS block
-+ offset */
-+#define R_386_TLS_LE 17 /* Offset relative to static TLS
-+ block */
-+#define R_386_TLS_GD 18 /* Direct 32 bit for GNU version of
-+ general dynamic thread local data */
-+#define R_386_TLS_LDM 19 /* Direct 32 bit for GNU version of
-+ local dynamic thread local data
-+ in LE code */
-+#define R_386_16 20
-+#define R_386_PC16 21
-+#define R_386_8 22
-+#define R_386_PC8 23
-+#define R_386_TLS_GD_32 24 /* Direct 32 bit for general dynamic
-+ thread local data */
-+#define R_386_TLS_GD_PUSH 25 /* Tag for pushl in GD TLS code */
-+#define R_386_TLS_GD_CALL 26 /* Relocation for call to
-+ __tls_get_addr() */
-+#define R_386_TLS_GD_POP 27 /* Tag for popl in GD TLS code */
-+#define R_386_TLS_LDM_32 28 /* Direct 32 bit for local dynamic
-+ thread local data in LE code */
-+#define R_386_TLS_LDM_PUSH 29 /* Tag for pushl in LDM TLS code */
-+#define R_386_TLS_LDM_CALL 30 /* Relocation for call to
-+ __tls_get_addr() in LDM code */
-+#define R_386_TLS_LDM_POP 31 /* Tag for popl in LDM TLS code */
-+#define R_386_TLS_LDO_32 32 /* Offset relative to TLS block */
-+#define R_386_TLS_IE_32 33 /* GOT entry for negated static TLS
-+ block offset */
-+#define R_386_TLS_LE_32 34 /* Negated offset relative to static
-+ TLS block */
-+#define R_386_TLS_DTPMOD32 35 /* ID of module containing symbol */
-+#define R_386_TLS_DTPOFF32 36 /* Offset in TLS block */
-+#define R_386_TLS_TPOFF32 37 /* Negated offset in static TLS block */
-+/* 38? */
-+#define R_386_TLS_GOTDESC 39 /* GOT offset for TLS descriptor. */
-+#define R_386_TLS_DESC_CALL 40 /* Marker of call through TLS
-+ descriptor for
-+ relaxation. */
-+#define R_386_TLS_DESC 41 /* TLS descriptor containing
-+ pointer to code and to
-+ argument, returning the TLS
-+ offset for the symbol. */
-+#define R_386_IRELATIVE 42 /* Adjust indirectly by program base */
-+/* Keep this the last entry. */
-+#define R_386_NUM 43
-+
-+/* SUN SPARC specific definitions. */
-+
-+/* Legal values for ST_TYPE subfield of st_info (symbol type). */
-+
-+#define STT_SPARC_REGISTER 13 /* Global register reserved to app. */
-+
-+/* Values for Elf64_Ehdr.e_flags. */
-+
-+#define EF_SPARCV9_MM 3
-+#define EF_SPARCV9_TSO 0
-+#define EF_SPARCV9_PSO 1
-+#define EF_SPARCV9_RMO 2
-+#define EF_SPARC_LEDATA 0x800000 /* little endian data */
-+#define EF_SPARC_EXT_MASK 0xFFFF00
-+#define EF_SPARC_32PLUS 0x000100 /* generic V8+ features */
-+#define EF_SPARC_SUN_US1 0x000200 /* Sun UltraSPARC1 extensions */
-+#define EF_SPARC_HAL_R1 0x000400 /* HAL R1 extensions */
-+#define EF_SPARC_SUN_US3 0x000800 /* Sun UltraSPARCIII extensions */
-+
-+/* SPARC relocs. */
-+
-+#define R_SPARC_NONE 0 /* No reloc */
-+#define R_SPARC_8 1 /* Direct 8 bit */
-+#define R_SPARC_16 2 /* Direct 16 bit */
-+#define R_SPARC_32 3 /* Direct 32 bit */
-+#define R_SPARC_DISP8 4 /* PC relative 8 bit */
-+#define R_SPARC_DISP16 5 /* PC relative 16 bit */
-+#define R_SPARC_DISP32 6 /* PC relative 32 bit */
-+#define R_SPARC_WDISP30 7 /* PC relative 30 bit shifted */
-+#define R_SPARC_WDISP22 8 /* PC relative 22 bit shifted */
-+#define R_SPARC_HI22 9 /* High 22 bit */
-+#define R_SPARC_22 10 /* Direct 22 bit */
-+#define R_SPARC_13 11 /* Direct 13 bit */
-+#define R_SPARC_LO10 12 /* Truncated 10 bit */
-+#define R_SPARC_GOT10 13 /* Truncated 10 bit GOT entry */
-+#define R_SPARC_GOT13 14 /* 13 bit GOT entry */
-+#define R_SPARC_GOT22 15 /* 22 bit GOT entry shifted */
-+#define R_SPARC_PC10 16 /* PC relative 10 bit truncated */
-+#define R_SPARC_PC22 17 /* PC relative 22 bit shifted */
-+#define R_SPARC_WPLT30 18 /* 30 bit PC relative PLT address */
-+#define R_SPARC_COPY 19 /* Copy symbol at runtime */
-+#define R_SPARC_GLOB_DAT 20 /* Create GOT entry */
-+#define R_SPARC_JMP_SLOT 21 /* Create PLT entry */
-+#define R_SPARC_RELATIVE 22 /* Adjust by program base */
-+#define R_SPARC_UA32 23 /* Direct 32 bit unaligned */
-+
-+/* Additional Sparc64 relocs. */
-+
-+#define R_SPARC_PLT32 24 /* Direct 32 bit ref to PLT entry */
-+#define R_SPARC_HIPLT22 25 /* High 22 bit PLT entry */
-+#define R_SPARC_LOPLT10 26 /* Truncated 10 bit PLT entry */
-+#define R_SPARC_PCPLT32 27 /* PC rel 32 bit ref to PLT entry */
-+#define R_SPARC_PCPLT22 28 /* PC rel high 22 bit PLT entry */
-+#define R_SPARC_PCPLT10 29 /* PC rel trunc 10 bit PLT entry */
-+#define R_SPARC_10 30 /* Direct 10 bit */
-+#define R_SPARC_11 31 /* Direct 11 bit */
-+#define R_SPARC_64 32 /* Direct 64 bit */
-+#define R_SPARC_OLO10 33 /* 10bit with secondary 13bit addend */
-+#define R_SPARC_HH22 34 /* Top 22 bits of direct 64 bit */
-+#define R_SPARC_HM10 35 /* High middle 10 bits of ... */
-+#define R_SPARC_LM22 36 /* Low middle 22 bits of ... */
-+#define R_SPARC_PC_HH22 37 /* Top 22 bits of pc rel 64 bit */
-+#define R_SPARC_PC_HM10 38 /* High middle 10 bit of ... */
-+#define R_SPARC_PC_LM22 39 /* Low miggle 22 bits of ... */
-+#define R_SPARC_WDISP16 40 /* PC relative 16 bit shifted */
-+#define R_SPARC_WDISP19 41 /* PC relative 19 bit shifted */
-+#define R_SPARC_GLOB_JMP 42 /* was part of v9 ABI but was removed */
-+#define R_SPARC_7 43 /* Direct 7 bit */
-+#define R_SPARC_5 44 /* Direct 5 bit */
-+#define R_SPARC_6 45 /* Direct 6 bit */
-+#define R_SPARC_DISP64 46 /* PC relative 64 bit */
-+#define R_SPARC_PLT64 47 /* Direct 64 bit ref to PLT entry */
-+#define R_SPARC_HIX22 48 /* High 22 bit complemented */
-+#define R_SPARC_LOX10 49 /* Truncated 11 bit complemented */
-+#define R_SPARC_H44 50 /* Direct high 12 of 44 bit */
-+#define R_SPARC_M44 51 /* Direct mid 22 of 44 bit */
-+#define R_SPARC_L44 52 /* Direct low 10 of 44 bit */
-+#define R_SPARC_REGISTER 53 /* Global register usage */
-+#define R_SPARC_UA64 54 /* Direct 64 bit unaligned */
-+#define R_SPARC_UA16 55 /* Direct 16 bit unaligned */
-+#define R_SPARC_TLS_GD_HI22 56
-+#define R_SPARC_TLS_GD_LO10 57
-+#define R_SPARC_TLS_GD_ADD 58
-+#define R_SPARC_TLS_GD_CALL 59
-+#define R_SPARC_TLS_LDM_HI22 60
-+#define R_SPARC_TLS_LDM_LO10 61
-+#define R_SPARC_TLS_LDM_ADD 62
-+#define R_SPARC_TLS_LDM_CALL 63
-+#define R_SPARC_TLS_LDO_HIX22 64
-+#define R_SPARC_TLS_LDO_LOX10 65
-+#define R_SPARC_TLS_LDO_ADD 66
-+#define R_SPARC_TLS_IE_HI22 67
-+#define R_SPARC_TLS_IE_LO10 68
-+#define R_SPARC_TLS_IE_LD 69
-+#define R_SPARC_TLS_IE_LDX 70
-+#define R_SPARC_TLS_IE_ADD 71
-+#define R_SPARC_TLS_LE_HIX22 72
-+#define R_SPARC_TLS_LE_LOX10 73
-+#define R_SPARC_TLS_DTPMOD32 74
-+#define R_SPARC_TLS_DTPMOD64 75
-+#define R_SPARC_TLS_DTPOFF32 76
-+#define R_SPARC_TLS_DTPOFF64 77
-+#define R_SPARC_TLS_TPOFF32 78
-+#define R_SPARC_TLS_TPOFF64 79
-+#define R_SPARC_GOTDATA_HIX22 80
-+#define R_SPARC_GOTDATA_LOX10 81
-+#define R_SPARC_GOTDATA_OP_HIX22 82
-+#define R_SPARC_GOTDATA_OP_LOX10 83
-+#define R_SPARC_GOTDATA_OP 84
-+#define R_SPARC_H34 85
-+#define R_SPARC_SIZE32 86
-+#define R_SPARC_SIZE64 87
-+#define R_SPARC_WDISP10 88
-+#define R_SPARC_JMP_IREL 248
-+#define R_SPARC_IRELATIVE 249
-+#define R_SPARC_GNU_VTINHERIT 250
-+#define R_SPARC_GNU_VTENTRY 251
-+#define R_SPARC_REV32 252
-+/* Keep this the last entry. */
-+#define R_SPARC_NUM 253
-+
-+/* For Sparc64, legal values for d_tag of Elf64_Dyn. */
-+
-+#define DT_SPARC_REGISTER 0x70000001
-+#define DT_SPARC_NUM 2
-+
-+/* MIPS R3000 specific definitions. */
-+
-+/* Legal values for e_flags field of Elf32_Ehdr. */
-+
-+#define EF_MIPS_NOREORDER 1 /* A .noreorder directive was used */
-+#define EF_MIPS_PIC 2 /* Contains PIC code */
-+#define EF_MIPS_CPIC 4 /* Uses PIC calling sequence */
-+#define EF_MIPS_XGOT 8
-+#define EF_MIPS_64BIT_WHIRL 16
-+#define EF_MIPS_ABI2 32
-+#define EF_MIPS_ABI_ON32 64
-+#define EF_MIPS_ARCH 0xf0000000 /* MIPS architecture level */
-+
-+/* Legal values for MIPS architecture level. */
-+
-+#define EF_MIPS_ARCH_1 0x00000000 /* -mips1 code. */
-+#define EF_MIPS_ARCH_2 0x10000000 /* -mips2 code. */
-+#define EF_MIPS_ARCH_3 0x20000000 /* -mips3 code. */
-+#define EF_MIPS_ARCH_4 0x30000000 /* -mips4 code. */
-+#define EF_MIPS_ARCH_5 0x40000000 /* -mips5 code. */
-+#define EF_MIPS_ARCH_32 0x60000000 /* MIPS32 code. */
-+#define EF_MIPS_ARCH_64 0x70000000 /* MIPS64 code. */
-+
-+/* The following are non-official names and should not be used. */
-+
-+#define E_MIPS_ARCH_1 0x00000000 /* -mips1 code. */
-+#define E_MIPS_ARCH_2 0x10000000 /* -mips2 code. */
-+#define E_MIPS_ARCH_3 0x20000000 /* -mips3 code. */
-+#define E_MIPS_ARCH_4 0x30000000 /* -mips4 code. */
-+#define E_MIPS_ARCH_5 0x40000000 /* -mips5 code. */
-+#define E_MIPS_ARCH_32 0x60000000 /* MIPS32 code. */
-+#define E_MIPS_ARCH_64 0x70000000 /* MIPS64 code. */
-+
-+/* Special section indices. */
-+
-+#define SHN_MIPS_ACOMMON 0xff00 /* Allocated common symbols */
-+#define SHN_MIPS_TEXT 0xff01 /* Allocated test symbols. */
-+#define SHN_MIPS_DATA 0xff02 /* Allocated data symbols. */
-+#define SHN_MIPS_SCOMMON 0xff03 /* Small common symbols */
-+#define SHN_MIPS_SUNDEFINED 0xff04 /* Small undefined symbols */
-+
-+/* Legal values for sh_type field of Elf32_Shdr. */
-+
-+#define SHT_MIPS_LIBLIST 0x70000000 /* Shared objects used in link */
-+#define SHT_MIPS_MSYM 0x70000001
-+#define SHT_MIPS_CONFLICT 0x70000002 /* Conflicting symbols */
-+#define SHT_MIPS_GPTAB 0x70000003 /* Global data area sizes */
-+#define SHT_MIPS_UCODE 0x70000004 /* Reserved for SGI/MIPS compilers */
-+#define SHT_MIPS_DEBUG 0x70000005 /* MIPS ECOFF debugging information*/
-+#define SHT_MIPS_REGINFO 0x70000006 /* Register usage information */
-+#define SHT_MIPS_PACKAGE 0x70000007
-+#define SHT_MIPS_PACKSYM 0x70000008
-+#define SHT_MIPS_RELD 0x70000009
-+#define SHT_MIPS_IFACE 0x7000000b
-+#define SHT_MIPS_CONTENT 0x7000000c
-+#define SHT_MIPS_OPTIONS 0x7000000d /* Miscellaneous options. */
-+#define SHT_MIPS_SHDR 0x70000010
-+#define SHT_MIPS_FDESC 0x70000011
-+#define SHT_MIPS_EXTSYM 0x70000012
-+#define SHT_MIPS_DENSE 0x70000013
-+#define SHT_MIPS_PDESC 0x70000014
-+#define SHT_MIPS_LOCSYM 0x70000015
-+#define SHT_MIPS_AUXSYM 0x70000016
-+#define SHT_MIPS_OPTSYM 0x70000017
-+#define SHT_MIPS_LOCSTR 0x70000018
-+#define SHT_MIPS_LINE 0x70000019
-+#define SHT_MIPS_RFDESC 0x7000001a
-+#define SHT_MIPS_DELTASYM 0x7000001b
-+#define SHT_MIPS_DELTAINST 0x7000001c
-+#define SHT_MIPS_DELTACLASS 0x7000001d
-+#define SHT_MIPS_DWARF 0x7000001e /* DWARF debugging information. */
-+#define SHT_MIPS_DELTADECL 0x7000001f
-+#define SHT_MIPS_SYMBOL_LIB 0x70000020
-+#define SHT_MIPS_EVENTS 0x70000021 /* Event section. */
-+#define SHT_MIPS_TRANSLATE 0x70000022
-+#define SHT_MIPS_PIXIE 0x70000023
-+#define SHT_MIPS_XLATE 0x70000024
-+#define SHT_MIPS_XLATE_DEBUG 0x70000025
-+#define SHT_MIPS_WHIRL 0x70000026
-+#define SHT_MIPS_EH_REGION 0x70000027
-+#define SHT_MIPS_XLATE_OLD 0x70000028
-+#define SHT_MIPS_PDR_EXCEPTION 0x70000029
-+
-+/* Legal values for sh_flags field of Elf32_Shdr. */
-+
-+#define SHF_MIPS_GPREL 0x10000000 /* Must be part of global data area */
-+#define SHF_MIPS_MERGE 0x20000000
-+#define SHF_MIPS_ADDR 0x40000000
-+#define SHF_MIPS_STRINGS 0x80000000
-+#define SHF_MIPS_NOSTRIP 0x08000000
-+#define SHF_MIPS_LOCAL 0x04000000
-+#define SHF_MIPS_NAMES 0x02000000
-+#define SHF_MIPS_NODUPE 0x01000000
-+
-+
-+/* Symbol tables. */
-+
-+/* MIPS specific values for `st_other'. */
-+#define STO_MIPS_DEFAULT 0x0
-+#define STO_MIPS_INTERNAL 0x1
-+#define STO_MIPS_HIDDEN 0x2
-+#define STO_MIPS_PROTECTED 0x3
-+#define STO_MIPS_PLT 0x8
-+#define STO_MIPS_SC_ALIGN_UNUSED 0xff
-+
-+/* MIPS specific values for `st_info'. */
-+#define STB_MIPS_SPLIT_COMMON 13
-+
-+/* Entries found in sections of type SHT_MIPS_GPTAB. */
-+
-+typedef union
-+{
-+ struct
-+ {
-+ Elf32_Word gt_current_g_value; /* -G value used for compilation */
-+ Elf32_Word gt_unused; /* Not used */
-+ } gt_header; /* First entry in section */
-+ struct
-+ {
-+ Elf32_Word gt_g_value; /* If this value were used for -G */
-+ Elf32_Word gt_bytes; /* This many bytes would be used */
-+ } gt_entry; /* Subsequent entries in section */
-+} Elf32_gptab;
-+
-+/* Entry found in sections of type SHT_MIPS_REGINFO. */
-+
-+typedef struct
-+{
-+ Elf32_Word ri_gprmask; /* General registers used */
-+ Elf32_Word ri_cprmask[4]; /* Coprocessor registers used */
-+ Elf32_Sword ri_gp_value; /* $gp register value */
-+} Elf32_RegInfo;
-+
-+/* Entries found in sections of type SHT_MIPS_OPTIONS. */
-+
-+typedef struct
-+{
-+ unsigned char kind; /* Determines interpretation of the
-+ variable part of descriptor. */
-+ unsigned char size; /* Size of descriptor, including header. */
-+ Elf32_Section section; /* Section header index of section affected,
-+ 0 for global options. */
-+ Elf32_Word info; /* Kind-specific information. */
-+} Elf_Options;
-+
-+/* Values for `kind' field in Elf_Options. */
-+
-+#define ODK_NULL 0 /* Undefined. */
-+#define ODK_REGINFO 1 /* Register usage information. */
-+#define ODK_EXCEPTIONS 2 /* Exception processing options. */
-+#define ODK_PAD 3 /* Section padding options. */
-+#define ODK_HWPATCH 4 /* Hardware workarounds performed */
-+#define ODK_FILL 5 /* record the fill value used by the linker. */
-+#define ODK_TAGS 6 /* reserve space for desktop tools to write. */
-+#define ODK_HWAND 7 /* HW workarounds. 'AND' bits when merging. */
-+#define ODK_HWOR 8 /* HW workarounds. 'OR' bits when merging. */
-+
-+/* Values for `info' in Elf_Options for ODK_EXCEPTIONS entries. */
-+
-+#define OEX_FPU_MIN 0x1f /* FPE's which MUST be enabled. */
-+#define OEX_FPU_MAX 0x1f00 /* FPE's which MAY be enabled. */
-+#define OEX_PAGE0 0x10000 /* page zero must be mapped. */
-+#define OEX_SMM 0x20000 /* Force sequential memory mode? */
-+#define OEX_FPDBUG 0x40000 /* Force floating point debug mode? */
-+#define OEX_PRECISEFP OEX_FPDBUG
-+#define OEX_DISMISS 0x80000 /* Dismiss invalid address faults? */
-+
-+#define OEX_FPU_INVAL 0x10
-+#define OEX_FPU_DIV0 0x08
-+#define OEX_FPU_OFLO 0x04
-+#define OEX_FPU_UFLO 0x02
-+#define OEX_FPU_INEX 0x01
-+
-+/* Masks for `info' in Elf_Options for an ODK_HWPATCH entry. */
-+
-+#define OHW_R4KEOP 0x1 /* R4000 end-of-page patch. */
-+#define OHW_R8KPFETCH 0x2 /* may need R8000 prefetch patch. */
-+#define OHW_R5KEOP 0x4 /* R5000 end-of-page patch. */
-+#define OHW_R5KCVTL 0x8 /* R5000 cvt.[ds].l bug. clean=1. */
-+
-+#define OPAD_PREFIX 0x1
-+#define OPAD_POSTFIX 0x2
-+#define OPAD_SYMBOL 0x4
-+
-+/* Entry found in `.options' section. */
-+
-+typedef struct
-+{
-+ Elf32_Word hwp_flags1; /* Extra flags. */
-+ Elf32_Word hwp_flags2; /* Extra flags. */
-+} Elf_Options_Hw;
-+
-+/* Masks for `info' in ElfOptions for ODK_HWAND and ODK_HWOR entries. */
-+
-+#define OHWA0_R4KEOP_CHECKED 0x00000001
-+#define OHWA1_R4KEOP_CLEAN 0x00000002
-+
-+/* MIPS relocs. */
-+
-+#define R_MIPS_NONE 0 /* No reloc */
-+#define R_MIPS_16 1 /* Direct 16 bit */
-+#define R_MIPS_32 2 /* Direct 32 bit */
-+#define R_MIPS_REL32 3 /* PC relative 32 bit */
-+#define R_MIPS_26 4 /* Direct 26 bit shifted */
-+#define R_MIPS_HI16 5 /* High 16 bit */
-+#define R_MIPS_LO16 6 /* Low 16 bit */
-+#define R_MIPS_GPREL16 7 /* GP relative 16 bit */
-+#define R_MIPS_LITERAL 8 /* 16 bit literal entry */
-+#define R_MIPS_GOT16 9 /* 16 bit GOT entry */
-+#define R_MIPS_PC16 10 /* PC relative 16 bit */
-+#define R_MIPS_CALL16 11 /* 16 bit GOT entry for function */
-+#define R_MIPS_GPREL32 12 /* GP relative 32 bit */
-+
-+#define R_MIPS_SHIFT5 16
-+#define R_MIPS_SHIFT6 17
-+#define R_MIPS_64 18
-+#define R_MIPS_GOT_DISP 19
-+#define R_MIPS_GOT_PAGE 20
-+#define R_MIPS_GOT_OFST 21
-+#define R_MIPS_GOT_HI16 22
-+#define R_MIPS_GOT_LO16 23
-+#define R_MIPS_SUB 24
-+#define R_MIPS_INSERT_A 25
-+#define R_MIPS_INSERT_B 26
-+#define R_MIPS_DELETE 27
-+#define R_MIPS_HIGHER 28
-+#define R_MIPS_HIGHEST 29
-+#define R_MIPS_CALL_HI16 30
-+#define R_MIPS_CALL_LO16 31
-+#define R_MIPS_SCN_DISP 32
-+#define R_MIPS_REL16 33
-+#define R_MIPS_ADD_IMMEDIATE 34
-+#define R_MIPS_PJUMP 35
-+#define R_MIPS_RELGOT 36
-+#define R_MIPS_JALR 37
-+#define R_MIPS_TLS_DTPMOD32 38 /* Module number 32 bit */
-+#define R_MIPS_TLS_DTPREL32 39 /* Module-relative offset 32 bit */
-+#define R_MIPS_TLS_DTPMOD64 40 /* Module number 64 bit */
-+#define R_MIPS_TLS_DTPREL64 41 /* Module-relative offset 64 bit */
-+#define R_MIPS_TLS_GD 42 /* 16 bit GOT offset for GD */
-+#define R_MIPS_TLS_LDM 43 /* 16 bit GOT offset for LDM */
-+#define R_MIPS_TLS_DTPREL_HI16 44 /* Module-relative offset, high 16 bits */
-+#define R_MIPS_TLS_DTPREL_LO16 45 /* Module-relative offset, low 16 bits */
-+#define R_MIPS_TLS_GOTTPREL 46 /* 16 bit GOT offset for IE */
-+#define R_MIPS_TLS_TPREL32 47 /* TP-relative offset, 32 bit */
-+#define R_MIPS_TLS_TPREL64 48 /* TP-relative offset, 64 bit */
-+#define R_MIPS_TLS_TPREL_HI16 49 /* TP-relative offset, high 16 bits */
-+#define R_MIPS_TLS_TPREL_LO16 50 /* TP-relative offset, low 16 bits */
-+#define R_MIPS_GLOB_DAT 51
-+#define R_MIPS_COPY 126
-+#define R_MIPS_JUMP_SLOT 127
-+/* Keep this the last entry. */
-+#define R_MIPS_NUM 128
-+
-+/* Legal values for p_type field of Elf32_Phdr. */
-+
-+#define PT_MIPS_REGINFO 0x70000000 /* Register usage information */
-+#define PT_MIPS_RTPROC 0x70000001 /* Runtime procedure table. */
-+#define PT_MIPS_OPTIONS 0x70000002
-+
-+/* Special program header types. */
-+
-+#define PF_MIPS_LOCAL 0x10000000
-+
-+/* Legal values for d_tag field of Elf32_Dyn. */
-+
-+#define DT_MIPS_RLD_VERSION 0x70000001 /* Runtime linker interface version */
-+#define DT_MIPS_TIME_STAMP 0x70000002 /* Timestamp */
-+#define DT_MIPS_ICHECKSUM 0x70000003 /* Checksum */
-+#define DT_MIPS_IVERSION 0x70000004 /* Version string (string tbl index) */
-+#define DT_MIPS_FLAGS 0x70000005 /* Flags */
-+#define DT_MIPS_BASE_ADDRESS 0x70000006 /* Base address */
-+#define DT_MIPS_MSYM 0x70000007
-+#define DT_MIPS_CONFLICT 0x70000008 /* Address of CONFLICT section */
-+#define DT_MIPS_LIBLIST 0x70000009 /* Address of LIBLIST section */
-+#define DT_MIPS_LOCAL_GOTNO 0x7000000a /* Number of local GOT entries */
-+#define DT_MIPS_CONFLICTNO 0x7000000b /* Number of CONFLICT entries */
-+#define DT_MIPS_LIBLISTNO 0x70000010 /* Number of LIBLIST entries */
-+#define DT_MIPS_SYMTABNO 0x70000011 /* Number of DYNSYM entries */
-+#define DT_MIPS_UNREFEXTNO 0x70000012 /* First external DYNSYM */
-+#define DT_MIPS_GOTSYM 0x70000013 /* First GOT entry in DYNSYM */
-+#define DT_MIPS_HIPAGENO 0x70000014 /* Number of GOT page table entries */
-+#define DT_MIPS_RLD_MAP 0x70000016 /* Address of run time loader map. */
-+#define DT_MIPS_DELTA_CLASS 0x70000017 /* Delta C++ class definition. */
-+#define DT_MIPS_DELTA_CLASS_NO 0x70000018 /* Number of entries in
-+ DT_MIPS_DELTA_CLASS. */
-+#define DT_MIPS_DELTA_INSTANCE 0x70000019 /* Delta C++ class instances. */
-+#define DT_MIPS_DELTA_INSTANCE_NO 0x7000001a /* Number of entries in
-+ DT_MIPS_DELTA_INSTANCE. */
-+#define DT_MIPS_DELTA_RELOC 0x7000001b /* Delta relocations. */
-+#define DT_MIPS_DELTA_RELOC_NO 0x7000001c /* Number of entries in
-+ DT_MIPS_DELTA_RELOC. */
-+#define DT_MIPS_DELTA_SYM 0x7000001d /* Delta symbols that Delta
-+ relocations refer to. */
-+#define DT_MIPS_DELTA_SYM_NO 0x7000001e /* Number of entries in
-+ DT_MIPS_DELTA_SYM. */
-+#define DT_MIPS_DELTA_CLASSSYM 0x70000020 /* Delta symbols that hold the
-+ class declaration. */
-+#define DT_MIPS_DELTA_CLASSSYM_NO 0x70000021 /* Number of entries in
-+ DT_MIPS_DELTA_CLASSSYM. */
-+#define DT_MIPS_CXX_FLAGS 0x70000022 /* Flags indicating for C++ flavor. */
-+#define DT_MIPS_PIXIE_INIT 0x70000023
-+#define DT_MIPS_SYMBOL_LIB 0x70000024
-+#define DT_MIPS_LOCALPAGE_GOTIDX 0x70000025
-+#define DT_MIPS_LOCAL_GOTIDX 0x70000026
-+#define DT_MIPS_HIDDEN_GOTIDX 0x70000027
-+#define DT_MIPS_PROTECTED_GOTIDX 0x70000028
-+#define DT_MIPS_OPTIONS 0x70000029 /* Address of .options. */
-+#define DT_MIPS_INTERFACE 0x7000002a /* Address of .interface. */
-+#define DT_MIPS_DYNSTR_ALIGN 0x7000002b
-+#define DT_MIPS_INTERFACE_SIZE 0x7000002c /* Size of the .interface section. */
-+#define DT_MIPS_RLD_TEXT_RESOLVE_ADDR 0x7000002d /* Address of rld_text_rsolve
-+ function stored in GOT. */
-+#define DT_MIPS_PERF_SUFFIX 0x7000002e /* Default suffix of dso to be added
-+ by rld on dlopen() calls. */
-+#define DT_MIPS_COMPACT_SIZE 0x7000002f /* (O32)Size of compact rel section. */
-+#define DT_MIPS_GP_VALUE 0x70000030 /* GP value for aux GOTs. */
-+#define DT_MIPS_AUX_DYNAMIC 0x70000031 /* Address of aux .dynamic. */
-+/* The address of .got.plt in an executable using the new non-PIC ABI. */
-+#define DT_MIPS_PLTGOT 0x70000032
-+/* The base of the PLT in an executable using the new non-PIC ABI if that
-+ PLT is writable. For a non-writable PLT, this is omitted or has a zero
-+ value. */
-+#define DT_MIPS_RWPLT 0x70000034
-+#define DT_MIPS_NUM 0x35
-+
-+/* Legal values for DT_MIPS_FLAGS Elf32_Dyn entry. */
-+
-+#define RHF_NONE 0 /* No flags */
-+#define RHF_QUICKSTART (1 << 0) /* Use quickstart */
-+#define RHF_NOTPOT (1 << 1) /* Hash size not power of 2 */
-+#define RHF_NO_LIBRARY_REPLACEMENT (1 << 2) /* Ignore LD_LIBRARY_PATH */
-+#define RHF_NO_MOVE (1 << 3)
-+#define RHF_SGI_ONLY (1 << 4)
-+#define RHF_GUARANTEE_INIT (1 << 5)
-+#define RHF_DELTA_C_PLUS_PLUS (1 << 6)
-+#define RHF_GUARANTEE_START_INIT (1 << 7)
-+#define RHF_PIXIE (1 << 8)
-+#define RHF_DEFAULT_DELAY_LOAD (1 << 9)
-+#define RHF_REQUICKSTART (1 << 10)
-+#define RHF_REQUICKSTARTED (1 << 11)
-+#define RHF_CORD (1 << 12)
-+#define RHF_NO_UNRES_UNDEF (1 << 13)
-+#define RHF_RLD_ORDER_SAFE (1 << 14)
-+
-+/* Entries found in sections of type SHT_MIPS_LIBLIST. */
-+
-+typedef struct
-+{
-+ Elf32_Word l_name; /* Name (string table index) */
-+ Elf32_Word l_time_stamp; /* Timestamp */
-+ Elf32_Word l_checksum; /* Checksum */
-+ Elf32_Word l_version; /* Interface version */
-+ Elf32_Word l_flags; /* Flags */
-+} Elf32_Lib;
-+
-+typedef struct
-+{
-+ Elf64_Word l_name; /* Name (string table index) */
-+ Elf64_Word l_time_stamp; /* Timestamp */
-+ Elf64_Word l_checksum; /* Checksum */
-+ Elf64_Word l_version; /* Interface version */
-+ Elf64_Word l_flags; /* Flags */
-+} Elf64_Lib;
-+
-+
-+/* Legal values for l_flags. */
-+
-+#define LL_NONE 0
-+#define LL_EXACT_MATCH (1 << 0) /* Require exact match */
-+#define LL_IGNORE_INT_VER (1 << 1) /* Ignore interface version */
-+#define LL_REQUIRE_MINOR (1 << 2)
-+#define LL_EXPORTS (1 << 3)
-+#define LL_DELAY_LOAD (1 << 4)
-+#define LL_DELTA (1 << 5)
-+
-+/* Entries found in sections of type SHT_MIPS_CONFLICT. */
-+
-+typedef Elf32_Addr Elf32_Conflict;
-+
-+
-+/* HPPA specific definitions. */
-+
-+/* Legal values for e_flags field of Elf32_Ehdr. */
-+
-+#define EF_PARISC_TRAPNIL 0x00010000 /* Trap nil pointer dereference. */
-+#define EF_PARISC_EXT 0x00020000 /* Program uses arch. extensions. */
-+#define EF_PARISC_LSB 0x00040000 /* Program expects little endian. */
-+#define EF_PARISC_WIDE 0x00080000 /* Program expects wide mode. */
-+#define EF_PARISC_NO_KABP 0x00100000 /* No kernel assisted branch
-+ prediction. */
-+#define EF_PARISC_LAZYSWAP 0x00400000 /* Allow lazy swapping. */
-+#define EF_PARISC_ARCH 0x0000ffff /* Architecture version. */
-+
-+/* Defined values for `e_flags & EF_PARISC_ARCH' are: */
-+
-+#define EFA_PARISC_1_0 0x020b /* PA-RISC 1.0 big-endian. */
-+#define EFA_PARISC_1_1 0x0210 /* PA-RISC 1.1 big-endian. */
-+#define EFA_PARISC_2_0 0x0214 /* PA-RISC 2.0 big-endian. */
-+
-+/* Additional section indeces. */
-+
-+#define SHN_PARISC_ANSI_COMMON 0xff00 /* Section for tenatively declared
-+ symbols in ANSI C. */
-+#define SHN_PARISC_HUGE_COMMON 0xff01 /* Common blocks in huge model. */
-+
-+/* Legal values for sh_type field of Elf32_Shdr. */
-+
-+#define SHT_PARISC_EXT 0x70000000 /* Contains product specific ext. */
-+#define SHT_PARISC_UNWIND 0x70000001 /* Unwind information. */
-+#define SHT_PARISC_DOC 0x70000002 /* Debug info for optimized code. */
-+
-+/* Legal values for sh_flags field of Elf32_Shdr. */
-+
-+#define SHF_PARISC_SHORT 0x20000000 /* Section with short addressing. */
-+#define SHF_PARISC_HUGE 0x40000000 /* Section far from gp. */
-+#define SHF_PARISC_SBP 0x80000000 /* Static branch prediction code. */
-+
-+/* Legal values for ST_TYPE subfield of st_info (symbol type). */
-+
-+#define STT_PARISC_MILLICODE 13 /* Millicode function entry point. */
-+
-+#define STT_HP_OPAQUE (STT_LOOS + 0x1)
-+#define STT_HP_STUB (STT_LOOS + 0x2)
-+
-+/* HPPA relocs. */
-+
-+#define R_PARISC_NONE 0 /* No reloc. */
-+#define R_PARISC_DIR32 1 /* Direct 32-bit reference. */
-+#define R_PARISC_DIR21L 2 /* Left 21 bits of eff. address. */
-+#define R_PARISC_DIR17R 3 /* Right 17 bits of eff. address. */
-+#define R_PARISC_DIR17F 4 /* 17 bits of eff. address. */
-+#define R_PARISC_DIR14R 6 /* Right 14 bits of eff. address. */
-+#define R_PARISC_PCREL32 9 /* 32-bit rel. address. */
-+#define R_PARISC_PCREL21L 10 /* Left 21 bits of rel. address. */
-+#define R_PARISC_PCREL17R 11 /* Right 17 bits of rel. address. */
-+#define R_PARISC_PCREL17F 12 /* 17 bits of rel. address. */
-+#define R_PARISC_PCREL14R 14 /* Right 14 bits of rel. address. */
-+#define R_PARISC_DPREL21L 18 /* Left 21 bits of rel. address. */
-+#define R_PARISC_DPREL14R 22 /* Right 14 bits of rel. address. */
-+#define R_PARISC_GPREL21L 26 /* GP-relative, left 21 bits. */
-+#define R_PARISC_GPREL14R 30 /* GP-relative, right 14 bits. */
-+#define R_PARISC_LTOFF21L 34 /* LT-relative, left 21 bits. */
-+#define R_PARISC_LTOFF14R 38 /* LT-relative, right 14 bits. */
-+#define R_PARISC_SECREL32 41 /* 32 bits section rel. address. */
-+#define R_PARISC_SEGBASE 48 /* No relocation, set segment base. */
-+#define R_PARISC_SEGREL32 49 /* 32 bits segment rel. address. */
-+#define R_PARISC_PLTOFF21L 50 /* PLT rel. address, left 21 bits. */
-+#define R_PARISC_PLTOFF14R 54 /* PLT rel. address, right 14 bits. */
-+#define R_PARISC_LTOFF_FPTR32 57 /* 32 bits LT-rel. function pointer. */
-+#define R_PARISC_LTOFF_FPTR21L 58 /* LT-rel. fct ptr, left 21 bits. */
-+#define R_PARISC_LTOFF_FPTR14R 62 /* LT-rel. fct ptr, right 14 bits. */
-+#define R_PARISC_FPTR64 64 /* 64 bits function address. */
-+#define R_PARISC_PLABEL32 65 /* 32 bits function address. */
-+#define R_PARISC_PLABEL21L 66 /* Left 21 bits of fdesc address. */
-+#define R_PARISC_PLABEL14R 70 /* Right 14 bits of fdesc address. */
-+#define R_PARISC_PCREL64 72 /* 64 bits PC-rel. address. */
-+#define R_PARISC_PCREL22F 74 /* 22 bits PC-rel. address. */
-+#define R_PARISC_PCREL14WR 75 /* PC-rel. address, right 14 bits. */
-+#define R_PARISC_PCREL14DR 76 /* PC rel. address, right 14 bits. */
-+#define R_PARISC_PCREL16F 77 /* 16 bits PC-rel. address. */
-+#define R_PARISC_PCREL16WF 78 /* 16 bits PC-rel. address. */
-+#define R_PARISC_PCREL16DF 79 /* 16 bits PC-rel. address. */
-+#define R_PARISC_DIR64 80 /* 64 bits of eff. address. */
-+#define R_PARISC_DIR14WR 83 /* 14 bits of eff. address. */
-+#define R_PARISC_DIR14DR 84 /* 14 bits of eff. address. */
-+#define R_PARISC_DIR16F 85 /* 16 bits of eff. address. */
-+#define R_PARISC_DIR16WF 86 /* 16 bits of eff. address. */
-+#define R_PARISC_DIR16DF 87 /* 16 bits of eff. address. */
-+#define R_PARISC_GPREL64 88 /* 64 bits of GP-rel. address. */
-+#define R_PARISC_GPREL14WR 91 /* GP-rel. address, right 14 bits. */
-+#define R_PARISC_GPREL14DR 92 /* GP-rel. address, right 14 bits. */
-+#define R_PARISC_GPREL16F 93 /* 16 bits GP-rel. address. */
-+#define R_PARISC_GPREL16WF 94 /* 16 bits GP-rel. address. */
-+#define R_PARISC_GPREL16DF 95 /* 16 bits GP-rel. address. */
-+#define R_PARISC_LTOFF64 96 /* 64 bits LT-rel. address. */
-+#define R_PARISC_LTOFF14WR 99 /* LT-rel. address, right 14 bits. */
-+#define R_PARISC_LTOFF14DR 100 /* LT-rel. address, right 14 bits. */
-+#define R_PARISC_LTOFF16F 101 /* 16 bits LT-rel. address. */
-+#define R_PARISC_LTOFF16WF 102 /* 16 bits LT-rel. address. */
-+#define R_PARISC_LTOFF16DF 103 /* 16 bits LT-rel. address. */
-+#define R_PARISC_SECREL64 104 /* 64 bits section rel. address. */
-+#define R_PARISC_SEGREL64 112 /* 64 bits segment rel. address. */
-+#define R_PARISC_PLTOFF14WR 115 /* PLT-rel. address, right 14 bits. */
-+#define R_PARISC_PLTOFF14DR 116 /* PLT-rel. address, right 14 bits. */
-+#define R_PARISC_PLTOFF16F 117 /* 16 bits LT-rel. address. */
-+#define R_PARISC_PLTOFF16WF 118 /* 16 bits PLT-rel. address. */
-+#define R_PARISC_PLTOFF16DF 119 /* 16 bits PLT-rel. address. */
-+#define R_PARISC_LTOFF_FPTR64 120 /* 64 bits LT-rel. function ptr. */
-+#define R_PARISC_LTOFF_FPTR14WR 123 /* LT-rel. fct. ptr., right 14 bits. */
-+#define R_PARISC_LTOFF_FPTR14DR 124 /* LT-rel. fct. ptr., right 14 bits. */
-+#define R_PARISC_LTOFF_FPTR16F 125 /* 16 bits LT-rel. function ptr. */
-+#define R_PARISC_LTOFF_FPTR16WF 126 /* 16 bits LT-rel. function ptr. */
-+#define R_PARISC_LTOFF_FPTR16DF 127 /* 16 bits LT-rel. function ptr. */
-+#define R_PARISC_LORESERVE 128
-+#define R_PARISC_COPY 128 /* Copy relocation. */
-+#define R_PARISC_IPLT 129 /* Dynamic reloc, imported PLT */
-+#define R_PARISC_EPLT 130 /* Dynamic reloc, exported PLT */
-+#define R_PARISC_TPREL32 153 /* 32 bits TP-rel. address. */
-+#define R_PARISC_TPREL21L 154 /* TP-rel. address, left 21 bits. */
-+#define R_PARISC_TPREL14R 158 /* TP-rel. address, right 14 bits. */
-+#define R_PARISC_LTOFF_TP21L 162 /* LT-TP-rel. address, left 21 bits. */
-+#define R_PARISC_LTOFF_TP14R 166 /* LT-TP-rel. address, right 14 bits.*/
-+#define R_PARISC_LTOFF_TP14F 167 /* 14 bits LT-TP-rel. address. */
-+#define R_PARISC_TPREL64 216 /* 64 bits TP-rel. address. */
-+#define R_PARISC_TPREL14WR 219 /* TP-rel. address, right 14 bits. */
-+#define R_PARISC_TPREL14DR 220 /* TP-rel. address, right 14 bits. */
-+#define R_PARISC_TPREL16F 221 /* 16 bits TP-rel. address. */
-+#define R_PARISC_TPREL16WF 222 /* 16 bits TP-rel. address. */
-+#define R_PARISC_TPREL16DF 223 /* 16 bits TP-rel. address. */
-+#define R_PARISC_LTOFF_TP64 224 /* 64 bits LT-TP-rel. address. */
-+#define R_PARISC_LTOFF_TP14WR 227 /* LT-TP-rel. address, right 14 bits.*/
-+#define R_PARISC_LTOFF_TP14DR 228 /* LT-TP-rel. address, right 14 bits.*/
-+#define R_PARISC_LTOFF_TP16F 229 /* 16 bits LT-TP-rel. address. */
-+#define R_PARISC_LTOFF_TP16WF 230 /* 16 bits LT-TP-rel. address. */
-+#define R_PARISC_LTOFF_TP16DF 231 /* 16 bits LT-TP-rel. address. */
-+#define R_PARISC_GNU_VTENTRY 232
-+#define R_PARISC_GNU_VTINHERIT 233
-+#define R_PARISC_TLS_GD21L 234 /* GD 21-bit left. */
-+#define R_PARISC_TLS_GD14R 235 /* GD 14-bit right. */
-+#define R_PARISC_TLS_GDCALL 236 /* GD call to __t_g_a. */
-+#define R_PARISC_TLS_LDM21L 237 /* LD module 21-bit left. */
-+#define R_PARISC_TLS_LDM14R 238 /* LD module 14-bit right. */
-+#define R_PARISC_TLS_LDMCALL 239 /* LD module call to __t_g_a. */
-+#define R_PARISC_TLS_LDO21L 240 /* LD offset 21-bit left. */
-+#define R_PARISC_TLS_LDO14R 241 /* LD offset 14-bit right. */
-+#define R_PARISC_TLS_DTPMOD32 242 /* DTP module 32-bit. */
-+#define R_PARISC_TLS_DTPMOD64 243 /* DTP module 64-bit. */
-+#define R_PARISC_TLS_DTPOFF32 244 /* DTP offset 32-bit. */
-+#define R_PARISC_TLS_DTPOFF64 245 /* DTP offset 32-bit. */
-+#define R_PARISC_TLS_LE21L R_PARISC_TPREL21L
-+#define R_PARISC_TLS_LE14R R_PARISC_TPREL14R
-+#define R_PARISC_TLS_IE21L R_PARISC_LTOFF_TP21L
-+#define R_PARISC_TLS_IE14R R_PARISC_LTOFF_TP14R
-+#define R_PARISC_TLS_TPREL32 R_PARISC_TPREL32
-+#define R_PARISC_TLS_TPREL64 R_PARISC_TPREL64
-+#define R_PARISC_HIRESERVE 255
-+
-+/* Legal values for p_type field of Elf32_Phdr/Elf64_Phdr. */
-+
-+#define PT_HP_TLS (PT_LOOS + 0x0)
-+#define PT_HP_CORE_NONE (PT_LOOS + 0x1)
-+#define PT_HP_CORE_VERSION (PT_LOOS + 0x2)
-+#define PT_HP_CORE_KERNEL (PT_LOOS + 0x3)
-+#define PT_HP_CORE_COMM (PT_LOOS + 0x4)
-+#define PT_HP_CORE_PROC (PT_LOOS + 0x5)
-+#define PT_HP_CORE_LOADABLE (PT_LOOS + 0x6)
-+#define PT_HP_CORE_STACK (PT_LOOS + 0x7)
-+#define PT_HP_CORE_SHM (PT_LOOS + 0x8)
-+#define PT_HP_CORE_MMF (PT_LOOS + 0x9)
-+#define PT_HP_PARALLEL (PT_LOOS + 0x10)
-+#define PT_HP_FASTBIND (PT_LOOS + 0x11)
-+#define PT_HP_OPT_ANNOT (PT_LOOS + 0x12)
-+#define PT_HP_HSL_ANNOT (PT_LOOS + 0x13)
-+#define PT_HP_STACK (PT_LOOS + 0x14)
-+
-+#define PT_PARISC_ARCHEXT 0x70000000
-+#define PT_PARISC_UNWIND 0x70000001
-+
-+/* Legal values for p_flags field of Elf32_Phdr/Elf64_Phdr. */
-+
-+#define PF_PARISC_SBP 0x08000000
-+
-+#define PF_HP_PAGE_SIZE 0x00100000
-+#define PF_HP_FAR_SHARED 0x00200000
-+#define PF_HP_NEAR_SHARED 0x00400000
-+#define PF_HP_CODE 0x01000000
-+#define PF_HP_MODIFY 0x02000000
-+#define PF_HP_LAZYSWAP 0x04000000
-+#define PF_HP_SBP 0x08000000
-+
-+
-+/* Alpha specific definitions. */
-+
-+/* Legal values for e_flags field of Elf64_Ehdr. */
-+
-+#define EF_ALPHA_32BIT 1 /* All addresses must be < 2GB. */
-+#define EF_ALPHA_CANRELAX 2 /* Relocations for relaxing exist. */
-+
-+/* Legal values for sh_type field of Elf64_Shdr. */
-+
-+/* These two are primerily concerned with ECOFF debugging info. */
-+#define SHT_ALPHA_DEBUG 0x70000001
-+#define SHT_ALPHA_REGINFO 0x70000002
-+
-+/* Legal values for sh_flags field of Elf64_Shdr. */
-+
-+#define SHF_ALPHA_GPREL 0x10000000
-+
-+/* Legal values for st_other field of Elf64_Sym. */
-+#define STO_ALPHA_NOPV 0x80 /* No PV required. */
-+#define STO_ALPHA_STD_GPLOAD 0x88 /* PV only used for initial ldgp. */
-+
-+/* Alpha relocs. */
-+
-+#define R_ALPHA_NONE 0 /* No reloc */
-+#define R_ALPHA_REFLONG 1 /* Direct 32 bit */
-+#define R_ALPHA_REFQUAD 2 /* Direct 64 bit */
-+#define R_ALPHA_GPREL32 3 /* GP relative 32 bit */
-+#define R_ALPHA_LITERAL 4 /* GP relative 16 bit w/optimization */
-+#define R_ALPHA_LITUSE 5 /* Optimization hint for LITERAL */
-+#define R_ALPHA_GPDISP 6 /* Add displacement to GP */
-+#define R_ALPHA_BRADDR 7 /* PC+4 relative 23 bit shifted */
-+#define R_ALPHA_HINT 8 /* PC+4 relative 16 bit shifted */
-+#define R_ALPHA_SREL16 9 /* PC relative 16 bit */
-+#define R_ALPHA_SREL32 10 /* PC relative 32 bit */
-+#define R_ALPHA_SREL64 11 /* PC relative 64 bit */
-+#define R_ALPHA_GPRELHIGH 17 /* GP relative 32 bit, high 16 bits */
-+#define R_ALPHA_GPRELLOW 18 /* GP relative 32 bit, low 16 bits */
-+#define R_ALPHA_GPREL16 19 /* GP relative 16 bit */
-+#define R_ALPHA_COPY 24 /* Copy symbol at runtime */
-+#define R_ALPHA_GLOB_DAT 25 /* Create GOT entry */
-+#define R_ALPHA_JMP_SLOT 26 /* Create PLT entry */
-+#define R_ALPHA_RELATIVE 27 /* Adjust by program base */
-+#define R_ALPHA_TLS_GD_HI 28
-+#define R_ALPHA_TLSGD 29
-+#define R_ALPHA_TLS_LDM 30
-+#define R_ALPHA_DTPMOD64 31
-+#define R_ALPHA_GOTDTPREL 32
-+#define R_ALPHA_DTPREL64 33
-+#define R_ALPHA_DTPRELHI 34
-+#define R_ALPHA_DTPRELLO 35
-+#define R_ALPHA_DTPREL16 36
-+#define R_ALPHA_GOTTPREL 37
-+#define R_ALPHA_TPREL64 38
-+#define R_ALPHA_TPRELHI 39
-+#define R_ALPHA_TPRELLO 40
-+#define R_ALPHA_TPREL16 41
-+/* Keep this the last entry. */
-+#define R_ALPHA_NUM 46
-+
-+/* Magic values of the LITUSE relocation addend. */
-+#define LITUSE_ALPHA_ADDR 0
-+#define LITUSE_ALPHA_BASE 1
-+#define LITUSE_ALPHA_BYTOFF 2
-+#define LITUSE_ALPHA_JSR 3
-+#define LITUSE_ALPHA_TLS_GD 4
-+#define LITUSE_ALPHA_TLS_LDM 5
-+
-+/* Legal values for d_tag of Elf64_Dyn. */
-+#define DT_ALPHA_PLTRO (DT_LOPROC + 0)
-+#define DT_ALPHA_NUM 1
-+
-+/* PowerPC specific declarations */
-+
-+/* Values for Elf32/64_Ehdr.e_flags. */
-+#define EF_PPC_EMB 0x80000000 /* PowerPC embedded flag */
-+
-+/* Cygnus local bits below */
-+#define EF_PPC_RELOCATABLE 0x00010000 /* PowerPC -mrelocatable flag*/
-+#define EF_PPC_RELOCATABLE_LIB 0x00008000 /* PowerPC -mrelocatable-lib
-+ flag */
-+
-+/* PowerPC relocations defined by the ABIs */
-+#define R_PPC_NONE 0
-+#define R_PPC_ADDR32 1 /* 32bit absolute address */
-+#define R_PPC_ADDR24 2 /* 26bit address, 2 bits ignored. */
-+#define R_PPC_ADDR16 3 /* 16bit absolute address */
-+#define R_PPC_ADDR16_LO 4 /* lower 16bit of absolute address */
-+#define R_PPC_ADDR16_HI 5 /* high 16bit of absolute address */
-+#define R_PPC_ADDR16_HA 6 /* adjusted high 16bit */
-+#define R_PPC_ADDR14 7 /* 16bit address, 2 bits ignored */
-+#define R_PPC_ADDR14_BRTAKEN 8
-+#define R_PPC_ADDR14_BRNTAKEN 9
-+#define R_PPC_REL24 10 /* PC relative 26 bit */
-+#define R_PPC_REL14 11 /* PC relative 16 bit */
-+#define R_PPC_REL14_BRTAKEN 12
-+#define R_PPC_REL14_BRNTAKEN 13
-+#define R_PPC_GOT16 14
-+#define R_PPC_GOT16_LO 15
-+#define R_PPC_GOT16_HI 16
-+#define R_PPC_GOT16_HA 17
-+#define R_PPC_PLTREL24 18
-+#define R_PPC_COPY 19
-+#define R_PPC_GLOB_DAT 20
-+#define R_PPC_JMP_SLOT 21
-+#define R_PPC_RELATIVE 22
-+#define R_PPC_LOCAL24PC 23
-+#define R_PPC_UADDR32 24
-+#define R_PPC_UADDR16 25
-+#define R_PPC_REL32 26
-+#define R_PPC_PLT32 27
-+#define R_PPC_PLTREL32 28
-+#define R_PPC_PLT16_LO 29
-+#define R_PPC_PLT16_HI 30
-+#define R_PPC_PLT16_HA 31
-+#define R_PPC_SDAREL16 32
-+#define R_PPC_SECTOFF 33
-+#define R_PPC_SECTOFF_LO 34
-+#define R_PPC_SECTOFF_HI 35
-+#define R_PPC_SECTOFF_HA 36
-+
-+/* PowerPC relocations defined for the TLS access ABI. */
-+#define R_PPC_TLS 67 /* none (sym+add)@tls */
-+#define R_PPC_DTPMOD32 68 /* word32 (sym+add)@dtpmod */
-+#define R_PPC_TPREL16 69 /* half16* (sym+add)@tprel */
-+#define R_PPC_TPREL16_LO 70 /* half16 (sym+add)@tprel@l */
-+#define R_PPC_TPREL16_HI 71 /* half16 (sym+add)@tprel@h */
-+#define R_PPC_TPREL16_HA 72 /* half16 (sym+add)@tprel@ha */
-+#define R_PPC_TPREL32 73 /* word32 (sym+add)@tprel */
-+#define R_PPC_DTPREL16 74 /* half16* (sym+add)@dtprel */
-+#define R_PPC_DTPREL16_LO 75 /* half16 (sym+add)@dtprel@l */
-+#define R_PPC_DTPREL16_HI 76 /* half16 (sym+add)@dtprel@h */
-+#define R_PPC_DTPREL16_HA 77 /* half16 (sym+add)@dtprel@ha */
-+#define R_PPC_DTPREL32 78 /* word32 (sym+add)@dtprel */
-+#define R_PPC_GOT_TLSGD16 79 /* half16* (sym+add)@got@tlsgd */
-+#define R_PPC_GOT_TLSGD16_LO 80 /* half16 (sym+add)@got@tlsgd@l */
-+#define R_PPC_GOT_TLSGD16_HI 81 /* half16 (sym+add)@got@tlsgd@h */
-+#define R_PPC_GOT_TLSGD16_HA 82 /* half16 (sym+add)@got@tlsgd@ha */
-+#define R_PPC_GOT_TLSLD16 83 /* half16* (sym+add)@got@tlsld */
-+#define R_PPC_GOT_TLSLD16_LO 84 /* half16 (sym+add)@got@tlsld@l */
-+#define R_PPC_GOT_TLSLD16_HI 85 /* half16 (sym+add)@got@tlsld@h */
-+#define R_PPC_GOT_TLSLD16_HA 86 /* half16 (sym+add)@got@tlsld@ha */
-+#define R_PPC_GOT_TPREL16 87 /* half16* (sym+add)@got@tprel */
-+#define R_PPC_GOT_TPREL16_LO 88 /* half16 (sym+add)@got@tprel@l */
-+#define R_PPC_GOT_TPREL16_HI 89 /* half16 (sym+add)@got@tprel@h */
-+#define R_PPC_GOT_TPREL16_HA 90 /* half16 (sym+add)@got@tprel@ha */
-+#define R_PPC_GOT_DTPREL16 91 /* half16* (sym+add)@got@dtprel */
-+#define R_PPC_GOT_DTPREL16_LO 92 /* half16* (sym+add)@got@dtprel@l */
-+#define R_PPC_GOT_DTPREL16_HI 93 /* half16* (sym+add)@got@dtprel@h */
-+#define R_PPC_GOT_DTPREL16_HA 94 /* half16* (sym+add)@got@dtprel@ha */
-+
-+/* The remaining relocs are from the Embedded ELF ABI, and are not
-+ in the SVR4 ELF ABI. */
-+#define R_PPC_EMB_NADDR32 101
-+#define R_PPC_EMB_NADDR16 102
-+#define R_PPC_EMB_NADDR16_LO 103
-+#define R_PPC_EMB_NADDR16_HI 104
-+#define R_PPC_EMB_NADDR16_HA 105
-+#define R_PPC_EMB_SDAI16 106
-+#define R_PPC_EMB_SDA2I16 107
-+#define R_PPC_EMB_SDA2REL 108
-+#define R_PPC_EMB_SDA21 109 /* 16 bit offset in SDA */
-+#define R_PPC_EMB_MRKREF 110
-+#define R_PPC_EMB_RELSEC16 111
-+#define R_PPC_EMB_RELST_LO 112
-+#define R_PPC_EMB_RELST_HI 113
-+#define R_PPC_EMB_RELST_HA 114
-+#define R_PPC_EMB_BIT_FLD 115
-+#define R_PPC_EMB_RELSDA 116 /* 16 bit relative offset in SDA */
-+
-+/* Diab tool relocations. */
-+#define R_PPC_DIAB_SDA21_LO 180 /* like EMB_SDA21, but lower 16 bit */
-+#define R_PPC_DIAB_SDA21_HI 181 /* like EMB_SDA21, but high 16 bit */
-+#define R_PPC_DIAB_SDA21_HA 182 /* like EMB_SDA21, adjusted high 16 */
-+#define R_PPC_DIAB_RELSDA_LO 183 /* like EMB_RELSDA, but lower 16 bit */
-+#define R_PPC_DIAB_RELSDA_HI 184 /* like EMB_RELSDA, but high 16 bit */
-+#define R_PPC_DIAB_RELSDA_HA 185 /* like EMB_RELSDA, adjusted high 16 */
-+
-+/* GNU extension to support local ifunc. */
-+#define R_PPC_IRELATIVE 248
-+
-+/* GNU relocs used in PIC code sequences. */
-+#define R_PPC_REL16 249 /* half16 (sym+add-.) */
-+#define R_PPC_REL16_LO 250 /* half16 (sym+add-.)@l */
-+#define R_PPC_REL16_HI 251 /* half16 (sym+add-.)@h */
-+#define R_PPC_REL16_HA 252 /* half16 (sym+add-.)@ha */
-+
-+/* This is a phony reloc to handle any old fashioned TOC16 references
-+ that may still be in object files. */
-+#define R_PPC_TOC16 255
-+
-+/* PowerPC specific values for the Dyn d_tag field. */
-+#define DT_PPC_GOT (DT_LOPROC + 0)
-+#define DT_PPC_NUM 1
-+
-+/* PowerPC64 relocations defined by the ABIs */
-+#define R_PPC64_NONE R_PPC_NONE
-+#define R_PPC64_ADDR32 R_PPC_ADDR32 /* 32bit absolute address */
-+#define R_PPC64_ADDR24 R_PPC_ADDR24 /* 26bit address, word aligned */
-+#define R_PPC64_ADDR16 R_PPC_ADDR16 /* 16bit absolute address */
-+#define R_PPC64_ADDR16_LO R_PPC_ADDR16_LO /* lower 16bits of address */
-+#define R_PPC64_ADDR16_HI R_PPC_ADDR16_HI /* high 16bits of address. */
-+#define R_PPC64_ADDR16_HA R_PPC_ADDR16_HA /* adjusted high 16bits. */
-+#define R_PPC64_ADDR14 R_PPC_ADDR14 /* 16bit address, word aligned */
-+#define R_PPC64_ADDR14_BRTAKEN R_PPC_ADDR14_BRTAKEN
-+#define R_PPC64_ADDR14_BRNTAKEN R_PPC_ADDR14_BRNTAKEN
-+#define R_PPC64_REL24 R_PPC_REL24 /* PC-rel. 26 bit, word aligned */
-+#define R_PPC64_REL14 R_PPC_REL14 /* PC relative 16 bit */
-+#define R_PPC64_REL14_BRTAKEN R_PPC_REL14_BRTAKEN
-+#define R_PPC64_REL14_BRNTAKEN R_PPC_REL14_BRNTAKEN
-+#define R_PPC64_GOT16 R_PPC_GOT16
-+#define R_PPC64_GOT16_LO R_PPC_GOT16_LO
-+#define R_PPC64_GOT16_HI R_PPC_GOT16_HI
-+#define R_PPC64_GOT16_HA R_PPC_GOT16_HA
-+
-+#define R_PPC64_COPY R_PPC_COPY
-+#define R_PPC64_GLOB_DAT R_PPC_GLOB_DAT
-+#define R_PPC64_JMP_SLOT R_PPC_JMP_SLOT
-+#define R_PPC64_RELATIVE R_PPC_RELATIVE
-+
-+#define R_PPC64_UADDR32 R_PPC_UADDR32
-+#define R_PPC64_UADDR16 R_PPC_UADDR16
-+#define R_PPC64_REL32 R_PPC_REL32
-+#define R_PPC64_PLT32 R_PPC_PLT32
-+#define R_PPC64_PLTREL32 R_PPC_PLTREL32
-+#define R_PPC64_PLT16_LO R_PPC_PLT16_LO
-+#define R_PPC64_PLT16_HI R_PPC_PLT16_HI
-+#define R_PPC64_PLT16_HA R_PPC_PLT16_HA
-+
-+#define R_PPC64_SECTOFF R_PPC_SECTOFF
-+#define R_PPC64_SECTOFF_LO R_PPC_SECTOFF_LO
-+#define R_PPC64_SECTOFF_HI R_PPC_SECTOFF_HI
-+#define R_PPC64_SECTOFF_HA R_PPC_SECTOFF_HA
-+#define R_PPC64_ADDR30 37 /* word30 (S + A - P) >> 2 */
-+#define R_PPC64_ADDR64 38 /* doubleword64 S + A */
-+#define R_PPC64_ADDR16_HIGHER 39 /* half16 #higher(S + A) */
-+#define R_PPC64_ADDR16_HIGHERA 40 /* half16 #highera(S + A) */
-+#define R_PPC64_ADDR16_HIGHEST 41 /* half16 #highest(S + A) */
-+#define R_PPC64_ADDR16_HIGHESTA 42 /* half16 #highesta(S + A) */
-+#define R_PPC64_UADDR64 43 /* doubleword64 S + A */
-+#define R_PPC64_REL64 44 /* doubleword64 S + A - P */
-+#define R_PPC64_PLT64 45 /* doubleword64 L + A */
-+#define R_PPC64_PLTREL64 46 /* doubleword64 L + A - P */
-+#define R_PPC64_TOC16 47 /* half16* S + A - .TOC */
-+#define R_PPC64_TOC16_LO 48 /* half16 #lo(S + A - .TOC.) */
-+#define R_PPC64_TOC16_HI 49 /* half16 #hi(S + A - .TOC.) */
-+#define R_PPC64_TOC16_HA 50 /* half16 #ha(S + A - .TOC.) */
-+#define R_PPC64_TOC 51 /* doubleword64 .TOC */
-+#define R_PPC64_PLTGOT16 52 /* half16* M + A */
-+#define R_PPC64_PLTGOT16_LO 53 /* half16 #lo(M + A) */
-+#define R_PPC64_PLTGOT16_HI 54 /* half16 #hi(M + A) */
-+#define R_PPC64_PLTGOT16_HA 55 /* half16 #ha(M + A) */
-+
-+#define R_PPC64_ADDR16_DS 56 /* half16ds* (S + A) >> 2 */
-+#define R_PPC64_ADDR16_LO_DS 57 /* half16ds #lo(S + A) >> 2 */
-+#define R_PPC64_GOT16_DS 58 /* half16ds* (G + A) >> 2 */
-+#define R_PPC64_GOT16_LO_DS 59 /* half16ds #lo(G + A) >> 2 */
-+#define R_PPC64_PLT16_LO_DS 60 /* half16ds #lo(L + A) >> 2 */
-+#define R_PPC64_SECTOFF_DS 61 /* half16ds* (R + A) >> 2 */
-+#define R_PPC64_SECTOFF_LO_DS 62 /* half16ds #lo(R + A) >> 2 */
-+#define R_PPC64_TOC16_DS 63 /* half16ds* (S + A - .TOC.) >> 2 */
-+#define R_PPC64_TOC16_LO_DS 64 /* half16ds #lo(S + A - .TOC.) >> 2 */
-+#define R_PPC64_PLTGOT16_DS 65 /* half16ds* (M + A) >> 2 */
-+#define R_PPC64_PLTGOT16_LO_DS 66 /* half16ds #lo(M + A) >> 2 */
-+
-+/* PowerPC64 relocations defined for the TLS access ABI. */
-+#define R_PPC64_TLS 67 /* none (sym+add)@tls */
-+#define R_PPC64_DTPMOD64 68 /* doubleword64 (sym+add)@dtpmod */
-+#define R_PPC64_TPREL16 69 /* half16* (sym+add)@tprel */
-+#define R_PPC64_TPREL16_LO 70 /* half16 (sym+add)@tprel@l */
-+#define R_PPC64_TPREL16_HI 71 /* half16 (sym+add)@tprel@h */
-+#define R_PPC64_TPREL16_HA 72 /* half16 (sym+add)@tprel@ha */
-+#define R_PPC64_TPREL64 73 /* doubleword64 (sym+add)@tprel */
-+#define R_PPC64_DTPREL16 74 /* half16* (sym+add)@dtprel */
-+#define R_PPC64_DTPREL16_LO 75 /* half16 (sym+add)@dtprel@l */
-+#define R_PPC64_DTPREL16_HI 76 /* half16 (sym+add)@dtprel@h */
-+#define R_PPC64_DTPREL16_HA 77 /* half16 (sym+add)@dtprel@ha */
-+#define R_PPC64_DTPREL64 78 /* doubleword64 (sym+add)@dtprel */
-+#define R_PPC64_GOT_TLSGD16 79 /* half16* (sym+add)@got@tlsgd */
-+#define R_PPC64_GOT_TLSGD16_LO 80 /* half16 (sym+add)@got@tlsgd@l */
-+#define R_PPC64_GOT_TLSGD16_HI 81 /* half16 (sym+add)@got@tlsgd@h */
-+#define R_PPC64_GOT_TLSGD16_HA 82 /* half16 (sym+add)@got@tlsgd@ha */
-+#define R_PPC64_GOT_TLSLD16 83 /* half16* (sym+add)@got@tlsld */
-+#define R_PPC64_GOT_TLSLD16_LO 84 /* half16 (sym+add)@got@tlsld@l */
-+#define R_PPC64_GOT_TLSLD16_HI 85 /* half16 (sym+add)@got@tlsld@h */
-+#define R_PPC64_GOT_TLSLD16_HA 86 /* half16 (sym+add)@got@tlsld@ha */
-+#define R_PPC64_GOT_TPREL16_DS 87 /* half16ds* (sym+add)@got@tprel */
-+#define R_PPC64_GOT_TPREL16_LO_DS 88 /* half16ds (sym+add)@got@tprel@l */
-+#define R_PPC64_GOT_TPREL16_HI 89 /* half16 (sym+add)@got@tprel@h */
-+#define R_PPC64_GOT_TPREL16_HA 90 /* half16 (sym+add)@got@tprel@ha */
-+#define R_PPC64_GOT_DTPREL16_DS 91 /* half16ds* (sym+add)@got@dtprel */
-+#define R_PPC64_GOT_DTPREL16_LO_DS 92 /* half16ds (sym+add)@got@dtprel@l */
-+#define R_PPC64_GOT_DTPREL16_HI 93 /* half16 (sym+add)@got@dtprel@h */
-+#define R_PPC64_GOT_DTPREL16_HA 94 /* half16 (sym+add)@got@dtprel@ha */
-+#define R_PPC64_TPREL16_DS 95 /* half16ds* (sym+add)@tprel */
-+#define R_PPC64_TPREL16_LO_DS 96 /* half16ds (sym+add)@tprel@l */
-+#define R_PPC64_TPREL16_HIGHER 97 /* half16 (sym+add)@tprel@higher */
-+#define R_PPC64_TPREL16_HIGHERA 98 /* half16 (sym+add)@tprel@highera */
-+#define R_PPC64_TPREL16_HIGHEST 99 /* half16 (sym+add)@tprel@highest */
-+#define R_PPC64_TPREL16_HIGHESTA 100 /* half16 (sym+add)@tprel@highesta */
-+#define R_PPC64_DTPREL16_DS 101 /* half16ds* (sym+add)@dtprel */
-+#define R_PPC64_DTPREL16_LO_DS 102 /* half16ds (sym+add)@dtprel@l */
-+#define R_PPC64_DTPREL16_HIGHER 103 /* half16 (sym+add)@dtprel@higher */
-+#define R_PPC64_DTPREL16_HIGHERA 104 /* half16 (sym+add)@dtprel@highera */
-+#define R_PPC64_DTPREL16_HIGHEST 105 /* half16 (sym+add)@dtprel@highest */
-+#define R_PPC64_DTPREL16_HIGHESTA 106 /* half16 (sym+add)@dtprel@highesta */
-+
-+/* GNU extension to support local ifunc. */
-+#define R_PPC64_JMP_IREL 247
-+#define R_PPC64_IRELATIVE 248
-+#define R_PPC64_REL16 249 /* half16 (sym+add-.) */
-+#define R_PPC64_REL16_LO 250 /* half16 (sym+add-.)@l */
-+#define R_PPC64_REL16_HI 251 /* half16 (sym+add-.)@h */
-+#define R_PPC64_REL16_HA 252 /* half16 (sym+add-.)@ha */
-+
-+/* PowerPC64 specific values for the Dyn d_tag field. */
-+#define DT_PPC64_GLINK (DT_LOPROC + 0)
-+#define DT_PPC64_OPD (DT_LOPROC + 1)
-+#define DT_PPC64_OPDSZ (DT_LOPROC + 2)
-+#define DT_PPC64_NUM 3
-+
-+
-+/* ARM specific declarations */
-+
-+/* Processor specific flags for the ELF header e_flags field. */
-+#define EF_ARM_RELEXEC 0x01
-+#define EF_ARM_HASENTRY 0x02
-+#define EF_ARM_INTERWORK 0x04
-+#define EF_ARM_APCS_26 0x08
-+#define EF_ARM_APCS_FLOAT 0x10
-+#define EF_ARM_PIC 0x20
-+#define EF_ARM_ALIGN8 0x40 /* 8-bit structure alignment is in use */
-+#define EF_ARM_NEW_ABI 0x80
-+#define EF_ARM_OLD_ABI 0x100
-+#define EF_ARM_SOFT_FLOAT 0x200
-+#define EF_ARM_VFP_FLOAT 0x400
-+#define EF_ARM_MAVERICK_FLOAT 0x800
-+
-+
-+/* Other constants defined in the ARM ELF spec. version B-01. */
-+/* NB. These conflict with values defined above. */
-+#define EF_ARM_SYMSARESORTED 0x04
-+#define EF_ARM_DYNSYMSUSESEGIDX 0x08
-+#define EF_ARM_MAPSYMSFIRST 0x10
-+#define EF_ARM_EABIMASK 0XFF000000
-+
-+/* Constants defined in AAELF. */
-+#define EF_ARM_BE8 0x00800000
-+#define EF_ARM_LE8 0x00400000
-+
-+#define EF_ARM_EABI_VERSION(flags) ((flags) & EF_ARM_EABIMASK)
-+#define EF_ARM_EABI_UNKNOWN 0x00000000
-+#define EF_ARM_EABI_VER1 0x01000000
-+#define EF_ARM_EABI_VER2 0x02000000
-+#define EF_ARM_EABI_VER3 0x03000000
-+#define EF_ARM_EABI_VER4 0x04000000
-+#define EF_ARM_EABI_VER5 0x05000000
-+
-+/* Additional symbol types for Thumb. */
-+#define STT_ARM_TFUNC STT_LOPROC /* A Thumb function. */
-+#define STT_ARM_16BIT STT_HIPROC /* A Thumb label. */
-+
-+/* ARM-specific values for sh_flags */
-+#define SHF_ARM_ENTRYSECT 0x10000000 /* Section contains an entry point */
-+#define SHF_ARM_COMDEF 0x80000000 /* Section may be multiply defined
-+ in the input to a link step. */
-+
-+/* ARM-specific program header flags */
-+#define PF_ARM_SB 0x10000000 /* Segment contains the location
-+ addressed by the static base. */
-+#define PF_ARM_PI 0x20000000 /* Position-independent segment. */
-+#define PF_ARM_ABS 0x40000000 /* Absolute segment. */
-+
-+/* Processor specific values for the Phdr p_type field. */
-+#define PT_ARM_EXIDX (PT_LOPROC + 1) /* ARM unwind segment. */
-+
-+/* Processor specific values for the Shdr sh_type field. */
-+#define SHT_ARM_EXIDX (SHT_LOPROC + 1) /* ARM unwind section. */
-+#define SHT_ARM_PREEMPTMAP (SHT_LOPROC + 2) /* Preemption details. */
-+#define SHT_ARM_ATTRIBUTES (SHT_LOPROC + 3) /* ARM attributes section. */
-+
-+
-+/* ARM relocs. */
-+
-+#define R_ARM_NONE 0 /* No reloc */
-+#define R_ARM_PC24 1 /* PC relative 26 bit branch */
-+#define R_ARM_ABS32 2 /* Direct 32 bit */
-+#define R_ARM_REL32 3 /* PC relative 32 bit */
-+#define R_ARM_PC13 4
-+#define R_ARM_ABS16 5 /* Direct 16 bit */
-+#define R_ARM_ABS12 6 /* Direct 12 bit */
-+#define R_ARM_THM_ABS5 7
-+#define R_ARM_ABS8 8 /* Direct 8 bit */
-+#define R_ARM_SBREL32 9
-+#define R_ARM_THM_PC22 10
-+#define R_ARM_THM_PC8 11
-+#define R_ARM_AMP_VCALL9 12
-+#define R_ARM_SWI24 13 /* Obsolete static relocation. */
-+#define R_ARM_TLS_DESC 13 /* Dynamic relocation. */
-+#define R_ARM_THM_SWI8 14
-+#define R_ARM_XPC25 15
-+#define R_ARM_THM_XPC22 16
-+#define R_ARM_TLS_DTPMOD32 17 /* ID of module containing symbol */
-+#define R_ARM_TLS_DTPOFF32 18 /* Offset in TLS block */
-+#define R_ARM_TLS_TPOFF32 19 /* Offset in static TLS block */
-+#define R_ARM_COPY 20 /* Copy symbol at runtime */
-+#define R_ARM_GLOB_DAT 21 /* Create GOT entry */
-+#define R_ARM_JUMP_SLOT 22 /* Create PLT entry */
-+#define R_ARM_RELATIVE 23 /* Adjust by program base */
-+#define R_ARM_GOTOFF 24 /* 32 bit offset to GOT */
-+#define R_ARM_GOTPC 25 /* 32 bit PC relative offset to GOT */
-+#define R_ARM_GOT32 26 /* 32 bit GOT entry */
-+#define R_ARM_PLT32 27 /* 32 bit PLT address */
-+#define R_ARM_ALU_PCREL_7_0 32
-+#define R_ARM_ALU_PCREL_15_8 33
-+#define R_ARM_ALU_PCREL_23_15 34
-+#define R_ARM_LDR_SBREL_11_0 35
-+#define R_ARM_ALU_SBREL_19_12 36
-+#define R_ARM_ALU_SBREL_27_20 37
-+#define R_ARM_TLS_GOTDESC 90
-+#define R_ARM_TLS_CALL 91
-+#define R_ARM_TLS_DESCSEQ 92
-+#define R_ARM_THM_TLS_CALL 93
-+#define R_ARM_GNU_VTENTRY 100
-+#define R_ARM_GNU_VTINHERIT 101
-+#define R_ARM_THM_PC11 102 /* thumb unconditional branch */
-+#define R_ARM_THM_PC9 103 /* thumb conditional branch */
-+#define R_ARM_TLS_GD32 104 /* PC-rel 32 bit for global dynamic
-+ thread local data */
-+#define R_ARM_TLS_LDM32 105 /* PC-rel 32 bit for local dynamic
-+ thread local data */
-+#define R_ARM_TLS_LDO32 106 /* 32 bit offset relative to TLS
-+ block */
-+#define R_ARM_TLS_IE32 107 /* PC-rel 32 bit for GOT entry of
-+ static TLS block offset */
-+#define R_ARM_TLS_LE32 108 /* 32 bit offset relative to static
-+ TLS block */
-+#define R_ARM_THM_TLS_DESCSEQ 129
-+#define R_ARM_IRELATIVE 160
-+#define R_ARM_RXPC25 249
-+#define R_ARM_RSBREL32 250
-+#define R_ARM_THM_RPC22 251
-+#define R_ARM_RREL32 252
-+#define R_ARM_RABS22 253
-+#define R_ARM_RPC24 254
-+#define R_ARM_RBASE 255
-+/* Keep this the last entry. */
-+#define R_ARM_NUM 256
-+
-+/* IA-64 specific declarations. */
-+
-+/* Processor specific flags for the Ehdr e_flags field. */
-+#define EF_IA_64_MASKOS 0x0000000f /* os-specific flags */
-+#define EF_IA_64_ABI64 0x00000010 /* 64-bit ABI */
-+#define EF_IA_64_ARCH 0xff000000 /* arch. version mask */
-+
-+/* Processor specific values for the Phdr p_type field. */
-+#define PT_IA_64_ARCHEXT (PT_LOPROC + 0) /* arch extension bits */
-+#define PT_IA_64_UNWIND (PT_LOPROC + 1) /* ia64 unwind bits */
-+#define PT_IA_64_HP_OPT_ANOT (PT_LOOS + 0x12)
-+#define PT_IA_64_HP_HSL_ANOT (PT_LOOS + 0x13)
-+#define PT_IA_64_HP_STACK (PT_LOOS + 0x14)
-+
-+/* Processor specific flags for the Phdr p_flags field. */
-+#define PF_IA_64_NORECOV 0x80000000 /* spec insns w/o recovery */
-+
-+/* Processor specific values for the Shdr sh_type field. */
-+#define SHT_IA_64_EXT (SHT_LOPROC + 0) /* extension bits */
-+#define SHT_IA_64_UNWIND (SHT_LOPROC + 1) /* unwind bits */
-+
-+/* Processor specific flags for the Shdr sh_flags field. */
-+#define SHF_IA_64_SHORT 0x10000000 /* section near gp */
-+#define SHF_IA_64_NORECOV 0x20000000 /* spec insns w/o recovery */
-+
-+/* Processor specific values for the Dyn d_tag field. */
-+#define DT_IA_64_PLT_RESERVE (DT_LOPROC + 0)
-+#define DT_IA_64_NUM 1
-+
-+/* IA-64 relocations. */
-+#define R_IA64_NONE 0x00 /* none */
-+#define R_IA64_IMM14 0x21 /* symbol + addend, add imm14 */
-+#define R_IA64_IMM22 0x22 /* symbol + addend, add imm22 */
-+#define R_IA64_IMM64 0x23 /* symbol + addend, mov imm64 */
-+#define R_IA64_DIR32MSB 0x24 /* symbol + addend, data4 MSB */
-+#define R_IA64_DIR32LSB 0x25 /* symbol + addend, data4 LSB */
-+#define R_IA64_DIR64MSB 0x26 /* symbol + addend, data8 MSB */
-+#define R_IA64_DIR64LSB 0x27 /* symbol + addend, data8 LSB */
-+#define R_IA64_GPREL22 0x2a /* @gprel(sym + add), add imm22 */
-+#define R_IA64_GPREL64I 0x2b /* @gprel(sym + add), mov imm64 */
-+#define R_IA64_GPREL32MSB 0x2c /* @gprel(sym + add), data4 MSB */
-+#define R_IA64_GPREL32LSB 0x2d /* @gprel(sym + add), data4 LSB */
-+#define R_IA64_GPREL64MSB 0x2e /* @gprel(sym + add), data8 MSB */
-+#define R_IA64_GPREL64LSB 0x2f /* @gprel(sym + add), data8 LSB */
-+#define R_IA64_LTOFF22 0x32 /* @ltoff(sym + add), add imm22 */
-+#define R_IA64_LTOFF64I 0x33 /* @ltoff(sym + add), mov imm64 */
-+#define R_IA64_PLTOFF22 0x3a /* @pltoff(sym + add), add imm22 */
-+#define R_IA64_PLTOFF64I 0x3b /* @pltoff(sym + add), mov imm64 */
-+#define R_IA64_PLTOFF64MSB 0x3e /* @pltoff(sym + add), data8 MSB */
-+#define R_IA64_PLTOFF64LSB 0x3f /* @pltoff(sym + add), data8 LSB */
-+#define R_IA64_FPTR64I 0x43 /* @fptr(sym + add), mov imm64 */
-+#define R_IA64_FPTR32MSB 0x44 /* @fptr(sym + add), data4 MSB */
-+#define R_IA64_FPTR32LSB 0x45 /* @fptr(sym + add), data4 LSB */
-+#define R_IA64_FPTR64MSB 0x46 /* @fptr(sym + add), data8 MSB */
-+#define R_IA64_FPTR64LSB 0x47 /* @fptr(sym + add), data8 LSB */
-+#define R_IA64_PCREL60B 0x48 /* @pcrel(sym + add), brl */
-+#define R_IA64_PCREL21B 0x49 /* @pcrel(sym + add), ptb, call */
-+#define R_IA64_PCREL21M 0x4a /* @pcrel(sym + add), chk.s */
-+#define R_IA64_PCREL21F 0x4b /* @pcrel(sym + add), fchkf */
-+#define R_IA64_PCREL32MSB 0x4c /* @pcrel(sym + add), data4 MSB */
-+#define R_IA64_PCREL32LSB 0x4d /* @pcrel(sym + add), data4 LSB */
-+#define R_IA64_PCREL64MSB 0x4e /* @pcrel(sym + add), data8 MSB */
-+#define R_IA64_PCREL64LSB 0x4f /* @pcrel(sym + add), data8 LSB */
-+#define R_IA64_LTOFF_FPTR22 0x52 /* @ltoff(@fptr(s+a)), imm22 */
-+#define R_IA64_LTOFF_FPTR64I 0x53 /* @ltoff(@fptr(s+a)), imm64 */
-+#define R_IA64_LTOFF_FPTR32MSB 0x54 /* @ltoff(@fptr(s+a)), data4 MSB */
-+#define R_IA64_LTOFF_FPTR32LSB 0x55 /* @ltoff(@fptr(s+a)), data4 LSB */
-+#define R_IA64_LTOFF_FPTR64MSB 0x56 /* @ltoff(@fptr(s+a)), data8 MSB */
-+#define R_IA64_LTOFF_FPTR64LSB 0x57 /* @ltoff(@fptr(s+a)), data8 LSB */
-+#define R_IA64_SEGREL32MSB 0x5c /* @segrel(sym + add), data4 MSB */
-+#define R_IA64_SEGREL32LSB 0x5d /* @segrel(sym + add), data4 LSB */
-+#define R_IA64_SEGREL64MSB 0x5e /* @segrel(sym + add), data8 MSB */
-+#define R_IA64_SEGREL64LSB 0x5f /* @segrel(sym + add), data8 LSB */
-+#define R_IA64_SECREL32MSB 0x64 /* @secrel(sym + add), data4 MSB */
-+#define R_IA64_SECREL32LSB 0x65 /* @secrel(sym + add), data4 LSB */
-+#define R_IA64_SECREL64MSB 0x66 /* @secrel(sym + add), data8 MSB */
-+#define R_IA64_SECREL64LSB 0x67 /* @secrel(sym + add), data8 LSB */
-+#define R_IA64_REL32MSB 0x6c /* data 4 + REL */
-+#define R_IA64_REL32LSB 0x6d /* data 4 + REL */
-+#define R_IA64_REL64MSB 0x6e /* data 8 + REL */
-+#define R_IA64_REL64LSB 0x6f /* data 8 + REL */
-+#define R_IA64_LTV32MSB 0x74 /* symbol + addend, data4 MSB */
-+#define R_IA64_LTV32LSB 0x75 /* symbol + addend, data4 LSB */
-+#define R_IA64_LTV64MSB 0x76 /* symbol + addend, data8 MSB */
-+#define R_IA64_LTV64LSB 0x77 /* symbol + addend, data8 LSB */
-+#define R_IA64_PCREL21BI 0x79 /* @pcrel(sym + add), 21bit inst */
-+#define R_IA64_PCREL22 0x7a /* @pcrel(sym + add), 22bit inst */
-+#define R_IA64_PCREL64I 0x7b /* @pcrel(sym + add), 64bit inst */
-+#define R_IA64_IPLTMSB 0x80 /* dynamic reloc, imported PLT, MSB */
-+#define R_IA64_IPLTLSB 0x81 /* dynamic reloc, imported PLT, LSB */
-+#define R_IA64_COPY 0x84 /* copy relocation */
-+#define R_IA64_SUB 0x85 /* Addend and symbol difference */
-+#define R_IA64_LTOFF22X 0x86 /* LTOFF22, relaxable. */
-+#define R_IA64_LDXMOV 0x87 /* Use of LTOFF22X. */
-+#define R_IA64_TPREL14 0x91 /* @tprel(sym + add), imm14 */
-+#define R_IA64_TPREL22 0x92 /* @tprel(sym + add), imm22 */
-+#define R_IA64_TPREL64I 0x93 /* @tprel(sym + add), imm64 */
-+#define R_IA64_TPREL64MSB 0x96 /* @tprel(sym + add), data8 MSB */
-+#define R_IA64_TPREL64LSB 0x97 /* @tprel(sym + add), data8 LSB */
-+#define R_IA64_LTOFF_TPREL22 0x9a /* @ltoff(@tprel(s+a)), imm2 */
-+#define R_IA64_DTPMOD64MSB 0xa6 /* @dtpmod(sym + add), data8 MSB */
-+#define R_IA64_DTPMOD64LSB 0xa7 /* @dtpmod(sym + add), data8 LSB */
-+#define R_IA64_LTOFF_DTPMOD22 0xaa /* @ltoff(@dtpmod(sym + add)), imm22 */
-+#define R_IA64_DTPREL14 0xb1 /* @dtprel(sym + add), imm14 */
-+#define R_IA64_DTPREL22 0xb2 /* @dtprel(sym + add), imm22 */
-+#define R_IA64_DTPREL64I 0xb3 /* @dtprel(sym + add), imm64 */
-+#define R_IA64_DTPREL32MSB 0xb4 /* @dtprel(sym + add), data4 MSB */
-+#define R_IA64_DTPREL32LSB 0xb5 /* @dtprel(sym + add), data4 LSB */
-+#define R_IA64_DTPREL64MSB 0xb6 /* @dtprel(sym + add), data8 MSB */
-+#define R_IA64_DTPREL64LSB 0xb7 /* @dtprel(sym + add), data8 LSB */
-+#define R_IA64_LTOFF_DTPREL22 0xba /* @ltoff(@dtprel(s+a)), imm22 */
-+
-+/* SH specific declarations */
-+
-+/* Processor specific flags for the ELF header e_flags field. */
-+#define EF_SH_MACH_MASK 0x1f
-+#define EF_SH_UNKNOWN 0x0
-+#define EF_SH1 0x1
-+#define EF_SH2 0x2
-+#define EF_SH3 0x3
-+#define EF_SH_DSP 0x4
-+#define EF_SH3_DSP 0x5
-+#define EF_SH4AL_DSP 0x6
-+#define EF_SH3E 0x8
-+#define EF_SH4 0x9
-+#define EF_SH2E 0xb
-+#define EF_SH4A 0xc
-+#define EF_SH2A 0xd
-+#define EF_SH4_NOFPU 0x10
-+#define EF_SH4A_NOFPU 0x11
-+#define EF_SH4_NOMMU_NOFPU 0x12
-+#define EF_SH2A_NOFPU 0x13
-+#define EF_SH3_NOMMU 0x14
-+#define EF_SH2A_SH4_NOFPU 0x15
-+#define EF_SH2A_SH3_NOFPU 0x16
-+#define EF_SH2A_SH4 0x17
-+#define EF_SH2A_SH3E 0x18
-+
-+/* SH relocs. */
-+#define R_SH_NONE 0
-+#define R_SH_DIR32 1
-+#define R_SH_REL32 2
-+#define R_SH_DIR8WPN 3
-+#define R_SH_IND12W 4
-+#define R_SH_DIR8WPL 5
-+#define R_SH_DIR8WPZ 6
-+#define R_SH_DIR8BP 7
-+#define R_SH_DIR8W 8
-+#define R_SH_DIR8L 9
-+#define R_SH_SWITCH16 25
-+#define R_SH_SWITCH32 26
-+#define R_SH_USES 27
-+#define R_SH_COUNT 28
-+#define R_SH_ALIGN 29
-+#define R_SH_CODE 30
-+#define R_SH_DATA 31
-+#define R_SH_LABEL 32
-+#define R_SH_SWITCH8 33
-+#define R_SH_GNU_VTINHERIT 34
-+#define R_SH_GNU_VTENTRY 35
-+#define R_SH_TLS_GD_32 144
-+#define R_SH_TLS_LD_32 145
-+#define R_SH_TLS_LDO_32 146
-+#define R_SH_TLS_IE_32 147
-+#define R_SH_TLS_LE_32 148
-+#define R_SH_TLS_DTPMOD32 149
-+#define R_SH_TLS_DTPOFF32 150
-+#define R_SH_TLS_TPOFF32 151
-+#define R_SH_GOT32 160
-+#define R_SH_PLT32 161
-+#define R_SH_COPY 162
-+#define R_SH_GLOB_DAT 163
-+#define R_SH_JMP_SLOT 164
-+#define R_SH_RELATIVE 165
-+#define R_SH_GOTOFF 166
-+#define R_SH_GOTPC 167
-+/* Keep this the last entry. */
-+#define R_SH_NUM 256
-+
-+/* S/390 specific definitions. */
-+
-+/* Valid values for the e_flags field. */
-+
-+#define EF_S390_HIGH_GPRS 0x00000001 /* High GPRs kernel facility needed. */
-+
-+/* Additional s390 relocs */
-+
-+#define R_390_NONE 0 /* No reloc. */
-+#define R_390_8 1 /* Direct 8 bit. */
-+#define R_390_12 2 /* Direct 12 bit. */
-+#define R_390_16 3 /* Direct 16 bit. */
-+#define R_390_32 4 /* Direct 32 bit. */
-+#define R_390_PC32 5 /* PC relative 32 bit. */
-+#define R_390_GOT12 6 /* 12 bit GOT offset. */
-+#define R_390_GOT32 7 /* 32 bit GOT offset. */
-+#define R_390_PLT32 8 /* 32 bit PC relative PLT address. */
-+#define R_390_COPY 9 /* Copy symbol at runtime. */
-+#define R_390_GLOB_DAT 10 /* Create GOT entry. */
-+#define R_390_JMP_SLOT 11 /* Create PLT entry. */
-+#define R_390_RELATIVE 12 /* Adjust by program base. */
-+#define R_390_GOTOFF32 13 /* 32 bit offset to GOT. */
-+#define R_390_GOTPC 14 /* 32 bit PC relative offset to GOT. */
-+#define R_390_GOT16 15 /* 16 bit GOT offset. */
-+#define R_390_PC16 16 /* PC relative 16 bit. */
-+#define R_390_PC16DBL 17 /* PC relative 16 bit shifted by 1. */
-+#define R_390_PLT16DBL 18 /* 16 bit PC rel. PLT shifted by 1. */
-+#define R_390_PC32DBL 19 /* PC relative 32 bit shifted by 1. */
-+#define R_390_PLT32DBL 20 /* 32 bit PC rel. PLT shifted by 1. */
-+#define R_390_GOTPCDBL 21 /* 32 bit PC rel. GOT shifted by 1. */
-+#define R_390_64 22 /* Direct 64 bit. */
-+#define R_390_PC64 23 /* PC relative 64 bit. */
-+#define R_390_GOT64 24 /* 64 bit GOT offset. */
-+#define R_390_PLT64 25 /* 64 bit PC relative PLT address. */
-+#define R_390_GOTENT 26 /* 32 bit PC rel. to GOT entry >> 1. */
-+#define R_390_GOTOFF16 27 /* 16 bit offset to GOT. */
-+#define R_390_GOTOFF64 28 /* 64 bit offset to GOT. */
-+#define R_390_GOTPLT12 29 /* 12 bit offset to jump slot. */
-+#define R_390_GOTPLT16 30 /* 16 bit offset to jump slot. */
-+#define R_390_GOTPLT32 31 /* 32 bit offset to jump slot. */
-+#define R_390_GOTPLT64 32 /* 64 bit offset to jump slot. */
-+#define R_390_GOTPLTENT 33 /* 32 bit rel. offset to jump slot. */
-+#define R_390_PLTOFF16 34 /* 16 bit offset from GOT to PLT. */
-+#define R_390_PLTOFF32 35 /* 32 bit offset from GOT to PLT. */
-+#define R_390_PLTOFF64 36 /* 16 bit offset from GOT to PLT. */
-+#define R_390_TLS_LOAD 37 /* Tag for load insn in TLS code. */
-+#define R_390_TLS_GDCALL 38 /* Tag for function call in general
-+ dynamic TLS code. */
-+#define R_390_TLS_LDCALL 39 /* Tag for function call in local
-+ dynamic TLS code. */
-+#define R_390_TLS_GD32 40 /* Direct 32 bit for general dynamic
-+ thread local data. */
-+#define R_390_TLS_GD64 41 /* Direct 64 bit for general dynamic
-+ thread local data. */
-+#define R_390_TLS_GOTIE12 42 /* 12 bit GOT offset for static TLS
-+ block offset. */
-+#define R_390_TLS_GOTIE32 43 /* 32 bit GOT offset for static TLS
-+ block offset. */
-+#define R_390_TLS_GOTIE64 44 /* 64 bit GOT offset for static TLS
-+ block offset. */
-+#define R_390_TLS_LDM32 45 /* Direct 32 bit for local dynamic
-+ thread local data in LE code. */
-+#define R_390_TLS_LDM64 46 /* Direct 64 bit for local dynamic
-+ thread local data in LE code. */
-+#define R_390_TLS_IE32 47 /* 32 bit address of GOT entry for
-+ negated static TLS block offset. */
-+#define R_390_TLS_IE64 48 /* 64 bit address of GOT entry for
-+ negated static TLS block offset. */
-+#define R_390_TLS_IEENT 49 /* 32 bit rel. offset to GOT entry for
-+ negated static TLS block offset. */
-+#define R_390_TLS_LE32 50 /* 32 bit negated offset relative to
-+ static TLS block. */
-+#define R_390_TLS_LE64 51 /* 64 bit negated offset relative to
-+ static TLS block. */
-+#define R_390_TLS_LDO32 52 /* 32 bit offset relative to TLS
-+ block. */
-+#define R_390_TLS_LDO64 53 /* 64 bit offset relative to TLS
-+ block. */
-+#define R_390_TLS_DTPMOD 54 /* ID of module containing symbol. */
-+#define R_390_TLS_DTPOFF 55 /* Offset in TLS block. */
-+#define R_390_TLS_TPOFF 56 /* Negated offset in static TLS
-+ block. */
-+#define R_390_20 57 /* Direct 20 bit. */
-+#define R_390_GOT20 58 /* 20 bit GOT offset. */
-+#define R_390_GOTPLT20 59 /* 20 bit offset to jump slot. */
-+#define R_390_TLS_GOTIE20 60 /* 20 bit GOT offset for static TLS
-+ block offset. */
-+#define R_390_IRELATIVE 61 /* STT_GNU_IFUNC relocation. */
-+/* Keep this the last entry. */
-+#define R_390_NUM 62
-+
-+
-+/* CRIS relocations. */
-+#define R_CRIS_NONE 0
-+#define R_CRIS_8 1
-+#define R_CRIS_16 2
-+#define R_CRIS_32 3
-+#define R_CRIS_8_PCREL 4
-+#define R_CRIS_16_PCREL 5
-+#define R_CRIS_32_PCREL 6
-+#define R_CRIS_GNU_VTINHERIT 7
-+#define R_CRIS_GNU_VTENTRY 8
-+#define R_CRIS_COPY 9
-+#define R_CRIS_GLOB_DAT 10
-+#define R_CRIS_JUMP_SLOT 11
-+#define R_CRIS_RELATIVE 12
-+#define R_CRIS_16_GOT 13
-+#define R_CRIS_32_GOT 14
-+#define R_CRIS_16_GOTPLT 15
-+#define R_CRIS_32_GOTPLT 16
-+#define R_CRIS_32_GOTREL 17
-+#define R_CRIS_32_PLT_GOTREL 18
-+#define R_CRIS_32_PLT_PCREL 19
-+
-+#define R_CRIS_NUM 20
-+
-+
-+/* AMD x86-64 relocations. */
-+#define R_X86_64_NONE 0 /* No reloc */
-+#define R_X86_64_64 1 /* Direct 64 bit */
-+#define R_X86_64_PC32 2 /* PC relative 32 bit signed */
-+#define R_X86_64_GOT32 3 /* 32 bit GOT entry */
-+#define R_X86_64_PLT32 4 /* 32 bit PLT address */
-+#define R_X86_64_COPY 5 /* Copy symbol at runtime */
-+#define R_X86_64_GLOB_DAT 6 /* Create GOT entry */
-+#define R_X86_64_JUMP_SLOT 7 /* Create PLT entry */
-+#define R_X86_64_RELATIVE 8 /* Adjust by program base */
-+#define R_X86_64_GOTPCREL 9 /* 32 bit signed PC relative
-+ offset to GOT */
-+#define R_X86_64_32 10 /* Direct 32 bit zero extended */
-+#define R_X86_64_32S 11 /* Direct 32 bit sign extended */
-+#define R_X86_64_16 12 /* Direct 16 bit zero extended */
-+#define R_X86_64_PC16 13 /* 16 bit sign extended pc relative */
-+#define R_X86_64_8 14 /* Direct 8 bit sign extended */
-+#define R_X86_64_PC8 15 /* 8 bit sign extended pc relative */
-+#define R_X86_64_DTPMOD64 16 /* ID of module containing symbol */
-+#define R_X86_64_DTPOFF64 17 /* Offset in module's TLS block */
-+#define R_X86_64_TPOFF64 18 /* Offset in initial TLS block */
-+#define R_X86_64_TLSGD 19 /* 32 bit signed PC relative offset
-+ to two GOT entries for GD symbol */
-+#define R_X86_64_TLSLD 20 /* 32 bit signed PC relative offset
-+ to two GOT entries for LD symbol */
-+#define R_X86_64_DTPOFF32 21 /* Offset in TLS block */
-+#define R_X86_64_GOTTPOFF 22 /* 32 bit signed PC relative offset
-+ to GOT entry for IE symbol */
-+#define R_X86_64_TPOFF32 23 /* Offset in initial TLS block */
-+#define R_X86_64_PC64 24 /* PC relative 64 bit */
-+#define R_X86_64_GOTOFF64 25 /* 64 bit offset to GOT */
-+#define R_X86_64_GOTPC32 26 /* 32 bit signed pc relative
-+ offset to GOT */
-+#define R_X86_64_GOT64 27 /* 64-bit GOT entry offset */
-+#define R_X86_64_GOTPCREL64 28 /* 64-bit PC relative offset
-+ to GOT entry */
-+#define R_X86_64_GOTPC64 29 /* 64-bit PC relative offset to GOT */
-+#define R_X86_64_GOTPLT64 30 /* like GOT64, says PLT entry needed */
-+#define R_X86_64_PLTOFF64 31 /* 64-bit GOT relative offset
-+ to PLT entry */
-+#define R_X86_64_SIZE32 32 /* Size of symbol plus 32-bit addend */
-+#define R_X86_64_SIZE64 33 /* Size of symbol plus 64-bit addend */
-+#define R_X86_64_GOTPC32_TLSDESC 34 /* GOT offset for TLS descriptor. */
-+#define R_X86_64_TLSDESC_CALL 35 /* Marker for call through TLS
-+ descriptor. */
-+#define R_X86_64_TLSDESC 36 /* TLS descriptor. */
-+#define R_X86_64_IRELATIVE 37 /* Adjust indirectly by program base */
-+#define R_X86_64_RELATIVE64 38 /* 64-bit adjust by program base */
-+
-+#define R_X86_64_NUM 39
-+
-+
-+/* AM33 relocations. */
-+#define R_MN10300_NONE 0 /* No reloc. */
-+#define R_MN10300_32 1 /* Direct 32 bit. */
-+#define R_MN10300_16 2 /* Direct 16 bit. */
-+#define R_MN10300_8 3 /* Direct 8 bit. */
-+#define R_MN10300_PCREL32 4 /* PC-relative 32-bit. */
-+#define R_MN10300_PCREL16 5 /* PC-relative 16-bit signed. */
-+#define R_MN10300_PCREL8 6 /* PC-relative 8-bit signed. */
-+#define R_MN10300_GNU_VTINHERIT 7 /* Ancient C++ vtable garbage... */
-+#define R_MN10300_GNU_VTENTRY 8 /* ... collection annotation. */
-+#define R_MN10300_24 9 /* Direct 24 bit. */
-+#define R_MN10300_GOTPC32 10 /* 32-bit PCrel offset to GOT. */
-+#define R_MN10300_GOTPC16 11 /* 16-bit PCrel offset to GOT. */
-+#define R_MN10300_GOTOFF32 12 /* 32-bit offset from GOT. */
-+#define R_MN10300_GOTOFF24 13 /* 24-bit offset from GOT. */
-+#define R_MN10300_GOTOFF16 14 /* 16-bit offset from GOT. */
-+#define R_MN10300_PLT32 15 /* 32-bit PCrel to PLT entry. */
-+#define R_MN10300_PLT16 16 /* 16-bit PCrel to PLT entry. */
-+#define R_MN10300_GOT32 17 /* 32-bit offset to GOT entry. */
-+#define R_MN10300_GOT24 18 /* 24-bit offset to GOT entry. */
-+#define R_MN10300_GOT16 19 /* 16-bit offset to GOT entry. */
-+#define R_MN10300_COPY 20 /* Copy symbol at runtime. */
-+#define R_MN10300_GLOB_DAT 21 /* Create GOT entry. */
-+#define R_MN10300_JMP_SLOT 22 /* Create PLT entry. */
-+#define R_MN10300_RELATIVE 23 /* Adjust by program base. */
-+
-+#define R_MN10300_NUM 24
-+
-+
-+/* M32R relocs. */
-+#define R_M32R_NONE 0 /* No reloc. */
-+#define R_M32R_16 1 /* Direct 16 bit. */
-+#define R_M32R_32 2 /* Direct 32 bit. */
-+#define R_M32R_24 3 /* Direct 24 bit. */
-+#define R_M32R_10_PCREL 4 /* PC relative 10 bit shifted. */
-+#define R_M32R_18_PCREL 5 /* PC relative 18 bit shifted. */
-+#define R_M32R_26_PCREL 6 /* PC relative 26 bit shifted. */
-+#define R_M32R_HI16_ULO 7 /* High 16 bit with unsigned low. */
-+#define R_M32R_HI16_SLO 8 /* High 16 bit with signed low. */
-+#define R_M32R_LO16 9 /* Low 16 bit. */
-+#define R_M32R_SDA16 10 /* 16 bit offset in SDA. */
-+#define R_M32R_GNU_VTINHERIT 11
-+#define R_M32R_GNU_VTENTRY 12
-+/* M32R relocs use SHT_RELA. */
-+#define R_M32R_16_RELA 33 /* Direct 16 bit. */
-+#define R_M32R_32_RELA 34 /* Direct 32 bit. */
-+#define R_M32R_24_RELA 35 /* Direct 24 bit. */
-+#define R_M32R_10_PCREL_RELA 36 /* PC relative 10 bit shifted. */
-+#define R_M32R_18_PCREL_RELA 37 /* PC relative 18 bit shifted. */
-+#define R_M32R_26_PCREL_RELA 38 /* PC relative 26 bit shifted. */
-+#define R_M32R_HI16_ULO_RELA 39 /* High 16 bit with unsigned low */
-+#define R_M32R_HI16_SLO_RELA 40 /* High 16 bit with signed low */
-+#define R_M32R_LO16_RELA 41 /* Low 16 bit */
-+#define R_M32R_SDA16_RELA 42 /* 16 bit offset in SDA */
-+#define R_M32R_RELA_GNU_VTINHERIT 43
-+#define R_M32R_RELA_GNU_VTENTRY 44
-+#define R_M32R_REL32 45 /* PC relative 32 bit. */
-+
-+#define R_M32R_GOT24 48 /* 24 bit GOT entry */
-+#define R_M32R_26_PLTREL 49 /* 26 bit PC relative to PLT shifted */
-+#define R_M32R_COPY 50 /* Copy symbol at runtime */
-+#define R_M32R_GLOB_DAT 51 /* Create GOT entry */
-+#define R_M32R_JMP_SLOT 52 /* Create PLT entry */
-+#define R_M32R_RELATIVE 53 /* Adjust by program base */
-+#define R_M32R_GOTOFF 54 /* 24 bit offset to GOT */
-+#define R_M32R_GOTPC24 55 /* 24 bit PC relative offset to GOT */
-+#define R_M32R_GOT16_HI_ULO 56 /* High 16 bit GOT entry with unsigned
-+ low */
-+#define R_M32R_GOT16_HI_SLO 57 /* High 16 bit GOT entry with signed
-+ low */
-+#define R_M32R_GOT16_LO 58 /* Low 16 bit GOT entry */
-+#define R_M32R_GOTPC_HI_ULO 59 /* High 16 bit PC relative offset to
-+ GOT with unsigned low */
-+#define R_M32R_GOTPC_HI_SLO 60 /* High 16 bit PC relative offset to
-+ GOT with signed low */
-+#define R_M32R_GOTPC_LO 61 /* Low 16 bit PC relative offset to
-+ GOT */
-+#define R_M32R_GOTOFF_HI_ULO 62 /* High 16 bit offset to GOT
-+ with unsigned low */
-+#define R_M32R_GOTOFF_HI_SLO 63 /* High 16 bit offset to GOT
-+ with signed low */
-+#define R_M32R_GOTOFF_LO 64 /* Low 16 bit offset to GOT */
-+#define R_M32R_NUM 256 /* Keep this the last entry. */
-+
-+
-+/* TILEPro relocations. */
-+#define R_TILEPRO_NONE 0 /* No reloc */
-+#define R_TILEPRO_32 1 /* Direct 32 bit */
-+#define R_TILEPRO_16 2 /* Direct 16 bit */
-+#define R_TILEPRO_8 3 /* Direct 8 bit */
-+#define R_TILEPRO_32_PCREL 4 /* PC relative 32 bit */
-+#define R_TILEPRO_16_PCREL 5 /* PC relative 16 bit */
-+#define R_TILEPRO_8_PCREL 6 /* PC relative 8 bit */
-+#define R_TILEPRO_LO16 7 /* Low 16 bit */
-+#define R_TILEPRO_HI16 8 /* High 16 bit */
-+#define R_TILEPRO_HA16 9 /* High 16 bit, adjusted */
-+#define R_TILEPRO_COPY 10 /* Copy relocation */
-+#define R_TILEPRO_GLOB_DAT 11 /* Create GOT entry */
-+#define R_TILEPRO_JMP_SLOT 12 /* Create PLT entry */
-+#define R_TILEPRO_RELATIVE 13 /* Adjust by program base */
-+#define R_TILEPRO_BROFF_X1 14 /* X1 pipe branch offset */
-+#define R_TILEPRO_JOFFLONG_X1 15 /* X1 pipe jump offset */
-+#define R_TILEPRO_JOFFLONG_X1_PLT 16 /* X1 pipe jump offset to PLT */
-+#define R_TILEPRO_IMM8_X0 17 /* X0 pipe 8-bit */
-+#define R_TILEPRO_IMM8_Y0 18 /* Y0 pipe 8-bit */
-+#define R_TILEPRO_IMM8_X1 19 /* X1 pipe 8-bit */
-+#define R_TILEPRO_IMM8_Y1 20 /* Y1 pipe 8-bit */
-+#define R_TILEPRO_MT_IMM15_X1 21 /* X1 pipe mtspr */
-+#define R_TILEPRO_MF_IMM15_X1 22 /* X1 pipe mfspr */
-+#define R_TILEPRO_IMM16_X0 23 /* X0 pipe 16-bit */
-+#define R_TILEPRO_IMM16_X1 24 /* X1 pipe 16-bit */
-+#define R_TILEPRO_IMM16_X0_LO 25 /* X0 pipe low 16-bit */
-+#define R_TILEPRO_IMM16_X1_LO 26 /* X1 pipe low 16-bit */
-+#define R_TILEPRO_IMM16_X0_HI 27 /* X0 pipe high 16-bit */
-+#define R_TILEPRO_IMM16_X1_HI 28 /* X1 pipe high 16-bit */
-+#define R_TILEPRO_IMM16_X0_HA 29 /* X0 pipe high 16-bit, adjusted */
-+#define R_TILEPRO_IMM16_X1_HA 30 /* X1 pipe high 16-bit, adjusted */
-+#define R_TILEPRO_IMM16_X0_PCREL 31 /* X0 pipe PC relative 16 bit */
-+#define R_TILEPRO_IMM16_X1_PCREL 32 /* X1 pipe PC relative 16 bit */
-+#define R_TILEPRO_IMM16_X0_LO_PCREL 33 /* X0 pipe PC relative low 16 bit */
-+#define R_TILEPRO_IMM16_X1_LO_PCREL 34 /* X1 pipe PC relative low 16 bit */
-+#define R_TILEPRO_IMM16_X0_HI_PCREL 35 /* X0 pipe PC relative high 16 bit */
-+#define R_TILEPRO_IMM16_X1_HI_PCREL 36 /* X1 pipe PC relative high 16 bit */
-+#define R_TILEPRO_IMM16_X0_HA_PCREL 37 /* X0 pipe PC relative ha() 16 bit */
-+#define R_TILEPRO_IMM16_X1_HA_PCREL 38 /* X1 pipe PC relative ha() 16 bit */
-+#define R_TILEPRO_IMM16_X0_GOT 39 /* X0 pipe 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X1_GOT 40 /* X1 pipe 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X0_GOT_LO 41 /* X0 pipe low 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X1_GOT_LO 42 /* X1 pipe low 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X0_GOT_HI 43 /* X0 pipe high 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X1_GOT_HI 44 /* X1 pipe high 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X0_GOT_HA 45 /* X0 pipe ha() 16-bit GOT offset */
-+#define R_TILEPRO_IMM16_X1_GOT_HA 46 /* X1 pipe ha() 16-bit GOT offset */
-+#define R_TILEPRO_MMSTART_X0 47 /* X0 pipe mm "start" */
-+#define R_TILEPRO_MMEND_X0 48 /* X0 pipe mm "end" */
-+#define R_TILEPRO_MMSTART_X1 49 /* X1 pipe mm "start" */
-+#define R_TILEPRO_MMEND_X1 50 /* X1 pipe mm "end" */
-+#define R_TILEPRO_SHAMT_X0 51 /* X0 pipe shift amount */
-+#define R_TILEPRO_SHAMT_X1 52 /* X1 pipe shift amount */
-+#define R_TILEPRO_SHAMT_Y0 53 /* Y0 pipe shift amount */
-+#define R_TILEPRO_SHAMT_Y1 54 /* Y1 pipe shift amount */
-+#define R_TILEPRO_DEST_IMM8_X1 55 /* X1 pipe destination 8-bit */
-+/* Relocs 56-59 are currently not defined. */
-+#define R_TILEPRO_TLS_GD_CALL 60 /* "jal" for TLS GD */
-+#define R_TILEPRO_IMM8_X0_TLS_GD_ADD 61 /* X0 pipe "addi" for TLS GD */
-+#define R_TILEPRO_IMM8_X1_TLS_GD_ADD 62 /* X1 pipe "addi" for TLS GD */
-+#define R_TILEPRO_IMM8_Y0_TLS_GD_ADD 63 /* Y0 pipe "addi" for TLS GD */
-+#define R_TILEPRO_IMM8_Y1_TLS_GD_ADD 64 /* Y1 pipe "addi" for TLS GD */
-+#define R_TILEPRO_TLS_IE_LOAD 65 /* "lw_tls" for TLS IE */
-+#define R_TILEPRO_IMM16_X0_TLS_GD 66 /* X0 pipe 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X1_TLS_GD 67 /* X1 pipe 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X0_TLS_GD_LO 68 /* X0 pipe low 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X1_TLS_GD_LO 69 /* X1 pipe low 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X0_TLS_GD_HI 70 /* X0 pipe high 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X1_TLS_GD_HI 71 /* X1 pipe high 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X0_TLS_GD_HA 72 /* X0 pipe ha() 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X1_TLS_GD_HA 73 /* X1 pipe ha() 16-bit TLS GD offset */
-+#define R_TILEPRO_IMM16_X0_TLS_IE 74 /* X0 pipe 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_IE 75 /* X1 pipe 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X0_TLS_IE_LO 76 /* X0 pipe low 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_IE_LO 77 /* X1 pipe low 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X0_TLS_IE_HI 78 /* X0 pipe high 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_IE_HI 79 /* X1 pipe high 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X0_TLS_IE_HA 80 /* X0 pipe ha() 16-bit TLS IE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_IE_HA 81 /* X1 pipe ha() 16-bit TLS IE offset */
-+#define R_TILEPRO_TLS_DTPMOD32 82 /* ID of module containing symbol */
-+#define R_TILEPRO_TLS_DTPOFF32 83 /* Offset in TLS block */
-+#define R_TILEPRO_TLS_TPOFF32 84 /* Offset in static TLS block */
-+#define R_TILEPRO_IMM16_X0_TLS_LE 85 /* X0 pipe 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_LE 86 /* X1 pipe 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X0_TLS_LE_LO 87 /* X0 pipe low 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_LE_LO 88 /* X1 pipe low 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X0_TLS_LE_HI 89 /* X0 pipe high 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_LE_HI 90 /* X1 pipe high 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X0_TLS_LE_HA 91 /* X0 pipe ha() 16-bit TLS LE offset */
-+#define R_TILEPRO_IMM16_X1_TLS_LE_HA 92 /* X1 pipe ha() 16-bit TLS LE offset */
-+
-+#define R_TILEPRO_GNU_VTINHERIT 128 /* GNU C++ vtable hierarchy */
-+#define R_TILEPRO_GNU_VTENTRY 129 /* GNU C++ vtable member usage */
-+
-+#define R_TILEPRO_NUM 130
-+
-+
-+/* TILE-Gx relocations. */
-+#define R_TILEGX_NONE 0 /* No reloc */
-+#define R_TILEGX_64 1 /* Direct 64 bit */
-+#define R_TILEGX_32 2 /* Direct 32 bit */
-+#define R_TILEGX_16 3 /* Direct 16 bit */
-+#define R_TILEGX_8 4 /* Direct 8 bit */
-+#define R_TILEGX_64_PCREL 5 /* PC relative 64 bit */
-+#define R_TILEGX_32_PCREL 6 /* PC relative 32 bit */
-+#define R_TILEGX_16_PCREL 7 /* PC relative 16 bit */
-+#define R_TILEGX_8_PCREL 8 /* PC relative 8 bit */
-+#define R_TILEGX_HW0 9 /* hword 0 16-bit */
-+#define R_TILEGX_HW1 10 /* hword 1 16-bit */
-+#define R_TILEGX_HW2 11 /* hword 2 16-bit */
-+#define R_TILEGX_HW3 12 /* hword 3 16-bit */
-+#define R_TILEGX_HW0_LAST 13 /* last hword 0 16-bit */
-+#define R_TILEGX_HW1_LAST 14 /* last hword 1 16-bit */
-+#define R_TILEGX_HW2_LAST 15 /* last hword 2 16-bit */
-+#define R_TILEGX_COPY 16 /* Copy relocation */
-+#define R_TILEGX_GLOB_DAT 17 /* Create GOT entry */
-+#define R_TILEGX_JMP_SLOT 18 /* Create PLT entry */
-+#define R_TILEGX_RELATIVE 19 /* Adjust by program base */
-+#define R_TILEGX_BROFF_X1 20 /* X1 pipe branch offset */
-+#define R_TILEGX_JUMPOFF_X1 21 /* X1 pipe jump offset */
-+#define R_TILEGX_JUMPOFF_X1_PLT 22 /* X1 pipe jump offset to PLT */
-+#define R_TILEGX_IMM8_X0 23 /* X0 pipe 8-bit */
-+#define R_TILEGX_IMM8_Y0 24 /* Y0 pipe 8-bit */
-+#define R_TILEGX_IMM8_X1 25 /* X1 pipe 8-bit */
-+#define R_TILEGX_IMM8_Y1 26 /* Y1 pipe 8-bit */
-+#define R_TILEGX_DEST_IMM8_X1 27 /* X1 pipe destination 8-bit */
-+#define R_TILEGX_MT_IMM14_X1 28 /* X1 pipe mtspr */
-+#define R_TILEGX_MF_IMM14_X1 29 /* X1 pipe mfspr */
-+#define R_TILEGX_MMSTART_X0 30 /* X0 pipe mm "start" */
-+#define R_TILEGX_MMEND_X0 31 /* X0 pipe mm "end" */
-+#define R_TILEGX_SHAMT_X0 32 /* X0 pipe shift amount */
-+#define R_TILEGX_SHAMT_X1 33 /* X1 pipe shift amount */
-+#define R_TILEGX_SHAMT_Y0 34 /* Y0 pipe shift amount */
-+#define R_TILEGX_SHAMT_Y1 35 /* Y1 pipe shift amount */
-+#define R_TILEGX_IMM16_X0_HW0 36 /* X0 pipe hword 0 */
-+#define R_TILEGX_IMM16_X1_HW0 37 /* X1 pipe hword 0 */
-+#define R_TILEGX_IMM16_X0_HW1 38 /* X0 pipe hword 1 */
-+#define R_TILEGX_IMM16_X1_HW1 39 /* X1 pipe hword 1 */
-+#define R_TILEGX_IMM16_X0_HW2 40 /* X0 pipe hword 2 */
-+#define R_TILEGX_IMM16_X1_HW2 41 /* X1 pipe hword 2 */
-+#define R_TILEGX_IMM16_X0_HW3 42 /* X0 pipe hword 3 */
-+#define R_TILEGX_IMM16_X1_HW3 43 /* X1 pipe hword 3 */
-+#define R_TILEGX_IMM16_X0_HW0_LAST 44 /* X0 pipe last hword 0 */
-+#define R_TILEGX_IMM16_X1_HW0_LAST 45 /* X1 pipe last hword 0 */
-+#define R_TILEGX_IMM16_X0_HW1_LAST 46 /* X0 pipe last hword 1 */
-+#define R_TILEGX_IMM16_X1_HW1_LAST 47 /* X1 pipe last hword 1 */
-+#define R_TILEGX_IMM16_X0_HW2_LAST 48 /* X0 pipe last hword 2 */
-+#define R_TILEGX_IMM16_X1_HW2_LAST 49 /* X1 pipe last hword 2 */
-+#define R_TILEGX_IMM16_X0_HW0_PCREL 50 /* X0 pipe PC relative hword 0 */
-+#define R_TILEGX_IMM16_X1_HW0_PCREL 51 /* X1 pipe PC relative hword 0 */
-+#define R_TILEGX_IMM16_X0_HW1_PCREL 52 /* X0 pipe PC relative hword 1 */
-+#define R_TILEGX_IMM16_X1_HW1_PCREL 53 /* X1 pipe PC relative hword 1 */
-+#define R_TILEGX_IMM16_X0_HW2_PCREL 54 /* X0 pipe PC relative hword 2 */
-+#define R_TILEGX_IMM16_X1_HW2_PCREL 55 /* X1 pipe PC relative hword 2 */
-+#define R_TILEGX_IMM16_X0_HW3_PCREL 56 /* X0 pipe PC relative hword 3 */
-+#define R_TILEGX_IMM16_X1_HW3_PCREL 57 /* X1 pipe PC relative hword 3 */
-+#define R_TILEGX_IMM16_X0_HW0_LAST_PCREL 58 /* X0 pipe PC-rel last hword 0 */
-+#define R_TILEGX_IMM16_X1_HW0_LAST_PCREL 59 /* X1 pipe PC-rel last hword 0 */
-+#define R_TILEGX_IMM16_X0_HW1_LAST_PCREL 60 /* X0 pipe PC-rel last hword 1 */
-+#define R_TILEGX_IMM16_X1_HW1_LAST_PCREL 61 /* X1 pipe PC-rel last hword 1 */
-+#define R_TILEGX_IMM16_X0_HW2_LAST_PCREL 62 /* X0 pipe PC-rel last hword 2 */
-+#define R_TILEGX_IMM16_X1_HW2_LAST_PCREL 63 /* X1 pipe PC-rel last hword 2 */
-+#define R_TILEGX_IMM16_X0_HW0_GOT 64 /* X0 pipe hword 0 GOT offset */
-+#define R_TILEGX_IMM16_X1_HW0_GOT 65 /* X1 pipe hword 0 GOT offset */
-+/* Relocs 66-71 are currently not defined. */
-+#define R_TILEGX_IMM16_X0_HW0_LAST_GOT 72 /* X0 pipe last hword 0 GOT offset */
-+#define R_TILEGX_IMM16_X1_HW0_LAST_GOT 73 /* X1 pipe last hword 0 GOT offset */
-+#define R_TILEGX_IMM16_X0_HW1_LAST_GOT 74 /* X0 pipe last hword 1 GOT offset */
-+#define R_TILEGX_IMM16_X1_HW1_LAST_GOT 75 /* X1 pipe last hword 1 GOT offset */
-+/* Relocs 76-77 are currently not defined. */
-+#define R_TILEGX_IMM16_X0_HW0_TLS_GD 78 /* X0 pipe hword 0 TLS GD offset */
-+#define R_TILEGX_IMM16_X1_HW0_TLS_GD 79 /* X1 pipe hword 0 TLS GD offset */
-+#define R_TILEGX_IMM16_X0_HW0_TLS_LE 80 /* X0 pipe hword 0 TLS LE offset */
-+#define R_TILEGX_IMM16_X1_HW0_TLS_LE 81 /* X1 pipe hword 0 TLS LE offset */
-+#define R_TILEGX_IMM16_X0_HW0_LAST_TLS_LE 82 /* X0 pipe last hword 0 LE off */
-+#define R_TILEGX_IMM16_X1_HW0_LAST_TLS_LE 83 /* X1 pipe last hword 0 LE off */
-+#define R_TILEGX_IMM16_X0_HW1_LAST_TLS_LE 84 /* X0 pipe last hword 1 LE off */
-+#define R_TILEGX_IMM16_X1_HW1_LAST_TLS_LE 85 /* X1 pipe last hword 1 LE off */
-+#define R_TILEGX_IMM16_X0_HW0_LAST_TLS_GD 86 /* X0 pipe last hword 0 GD off */
-+#define R_TILEGX_IMM16_X1_HW0_LAST_TLS_GD 87 /* X1 pipe last hword 0 GD off */
-+#define R_TILEGX_IMM16_X0_HW1_LAST_TLS_GD 88 /* X0 pipe last hword 1 GD off */
-+#define R_TILEGX_IMM16_X1_HW1_LAST_TLS_GD 89 /* X1 pipe last hword 1 GD off */
-+/* Relocs 90-91 are currently not defined. */
-+#define R_TILEGX_IMM16_X0_HW0_TLS_IE 92 /* X0 pipe hword 0 TLS IE offset */
-+#define R_TILEGX_IMM16_X1_HW0_TLS_IE 93 /* X1 pipe hword 0 TLS IE offset */
-+/* Relocs 94-99 are currently not defined. */
-+#define R_TILEGX_IMM16_X0_HW0_LAST_TLS_IE 100 /* X0 pipe last hword 0 IE off */
-+#define R_TILEGX_IMM16_X1_HW0_LAST_TLS_IE 101 /* X1 pipe last hword 0 IE off */
-+#define R_TILEGX_IMM16_X0_HW1_LAST_TLS_IE 102 /* X0 pipe last hword 1 IE off */
-+#define R_TILEGX_IMM16_X1_HW1_LAST_TLS_IE 103 /* X1 pipe last hword 1 IE off */
-+/* Relocs 104-105 are currently not defined. */
-+#define R_TILEGX_TLS_DTPMOD64 106 /* 64-bit ID of symbol's module */
-+#define R_TILEGX_TLS_DTPOFF64 107 /* 64-bit offset in TLS block */
-+#define R_TILEGX_TLS_TPOFF64 108 /* 64-bit offset in static TLS block */
-+#define R_TILEGX_TLS_DTPMOD32 109 /* 32-bit ID of symbol's module */
-+#define R_TILEGX_TLS_DTPOFF32 110 /* 32-bit offset in TLS block */
-+#define R_TILEGX_TLS_TPOFF32 111 /* 32-bit offset in static TLS block */
-+#define R_TILEGX_TLS_GD_CALL 112 /* "jal" for TLS GD */
-+#define R_TILEGX_IMM8_X0_TLS_GD_ADD 113 /* X0 pipe "addi" for TLS GD */
-+#define R_TILEGX_IMM8_X1_TLS_GD_ADD 114 /* X1 pipe "addi" for TLS GD */
-+#define R_TILEGX_IMM8_Y0_TLS_GD_ADD 115 /* Y0 pipe "addi" for TLS GD */
-+#define R_TILEGX_IMM8_Y1_TLS_GD_ADD 116 /* Y1 pipe "addi" for TLS GD */
-+#define R_TILEGX_TLS_IE_LOAD 117 /* "ld_tls" for TLS IE */
-+#define R_TILEGX_IMM8_X0_TLS_ADD 118 /* X0 pipe "addi" for TLS GD/IE */
-+#define R_TILEGX_IMM8_X1_TLS_ADD 119 /* X1 pipe "addi" for TLS GD/IE */
-+#define R_TILEGX_IMM8_Y0_TLS_ADD 120 /* Y0 pipe "addi" for TLS GD/IE */
-+#define R_TILEGX_IMM8_Y1_TLS_ADD 121 /* Y1 pipe "addi" for TLS GD/IE */
-+
-+#define R_TILEGX_GNU_VTINHERIT 128 /* GNU C++ vtable hierarchy */
-+#define R_TILEGX_GNU_VTENTRY 129 /* GNU C++ vtable member usage */
-+
-+#define R_TILEGX_NUM 130
-+
-+#endif /* elf.h */
---- a/scripts/mod/mk_elfconfig.c
-+++ b/scripts/mod/mk_elfconfig.c
-@@ -2,7 +2,11 @@
- #include <stdio.h>
- #include <stdlib.h>
- #include <string.h>
-+#ifndef __APPLE__
- #include <elf.h>
-+#else
-+#include "elf.h"
-+#endif
-
- int
- main(int argc, char **argv)
---- a/scripts/mod/modpost.h
-+++ b/scripts/mod/modpost.h
-@@ -8,7 +8,11 @@
- #include <sys/mman.h>
- #include <fcntl.h>
- #include <unistd.h>
-+#if !(defined(__APPLE__) || defined(__CYGWIN__))
- #include <elf.h>
-+#else
-+#include "elf.h"
-+#endif
-
- #include "elfconfig.h"
-
+++ /dev/null
-From 48232d3d931c95953ce2ddfe7da7bb164aef6a73 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:03:16 +0200
-Subject: linux-3.6: fix portability of some includes files in tools/ used on the host
-
-lede-commit: 6040b1d29ab1f047c5e49b748abcb6a3196add28
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- tools/include/tools/be_byteshift.h | 4 ++++
- tools/include/tools/le_byteshift.h | 4 ++++
- tools/include/tools/linux_types.h | 22 ++++++++++++++++++++++
- 3 files changed, 30 insertions(+)
- create mode 100644 tools/include/tools/linux_types.h
-
---- a/tools/include/tools/be_byteshift.h
-+++ b/tools/include/tools/be_byteshift.h
-@@ -2,6 +2,10 @@
- #ifndef _TOOLS_BE_BYTESHIFT_H
- #define _TOOLS_BE_BYTESHIFT_H
-
-+#ifndef __linux__
-+#include "linux_types.h"
-+#endif
-+
- #include <stdint.h>
-
- static inline uint16_t __get_unaligned_be16(const uint8_t *p)
---- a/tools/include/tools/le_byteshift.h
-+++ b/tools/include/tools/le_byteshift.h
-@@ -2,6 +2,10 @@
- #ifndef _TOOLS_LE_BYTESHIFT_H
- #define _TOOLS_LE_BYTESHIFT_H
-
-+#ifndef __linux__
-+#include "linux_types.h"
-+#endif
-+
- #include <stdint.h>
-
- static inline uint16_t __get_unaligned_le16(const uint8_t *p)
---- /dev/null
-+++ b/tools/include/tools/linux_types.h
-@@ -0,0 +1,22 @@
-+#ifndef __LINUX_TYPES_H
-+#define __LINUX_TYPES_H
-+
-+#include <stdint.h>
-+
-+typedef uint8_t __u8;
-+typedef uint8_t __be8;
-+typedef uint8_t __le8;
-+
-+typedef uint16_t __u16;
-+typedef uint16_t __be16;
-+typedef uint16_t __le16;
-+
-+typedef uint32_t __u32;
-+typedef uint32_t __be32;
-+typedef uint32_t __le32;
-+
-+typedef uint64_t __u64;
-+typedef uint64_t __be64;
-+typedef uint64_t __le64;
-+
-+#endif
+++ /dev/null
-From be9be95ff10e16a5b4ad36f903978d0cc5747024 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:04:08 +0200
-Subject: kernel: fix linux/spi/spidev.h portability issues with musl
-
-Felix will try to get this define included into musl
-
-lede-commit: 795e7cf60de19e7a076a46874fab7bb88b43bbff
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/uapi/linux/spi/spidev.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/include/uapi/linux/spi/spidev.h
-+++ b/include/uapi/linux/spi/spidev.h
-@@ -113,7 +113,7 @@ struct spi_ioc_transfer {
-
- /* not all platforms use <asm-generic/ioctl.h> or _IOC_TYPECHECK() ... */
- #define SPI_MSGSIZE(N) \
-- ((((N)*(sizeof (struct spi_ioc_transfer))) < (1 << _IOC_SIZEBITS)) \
-+ ((((N)*(sizeof (struct spi_ioc_transfer))) < (1 << 13)) \
- ? ((N)*(sizeof (struct spi_ioc_transfer))) : 0)
- #define SPI_IOC_MESSAGE(N) _IOW(SPI_IOC_MAGIC, 0, char[SPI_MSGSIZE(N)])
-
+++ /dev/null
-From e3d8676f5722b7622685581e06e8f53e6138e3ab Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 15 Jul 2017 23:42:36 +0200
-Subject: use -ffunction-sections, -fdata-sections and --gc-sections
-
-In combination with kernel symbol export stripping this significantly reduces
-the kernel image size. Used on both ARM and MIPS architectures.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- Makefile | 10 +++----
- arch/arm/Kconfig | 1 +
- arch/arm/boot/compressed/Makefile | 1 +
- arch/arm/kernel/vmlinux.lds.S | 26 ++++++++--------
- arch/mips/Kconfig | 1 +
- arch/mips/kernel/vmlinux.lds.S | 4 +--
- include/asm-generic/vmlinux.lds.h | 63 ++++++++++++++++++++-------------------
- 7 files changed, 55 insertions(+), 51 deletions(-)
-
---- a/Makefile
-+++ b/Makefile
-@@ -294,6 +294,11 @@ else
- scripts/Kbuild.include: ;
- include scripts/Kbuild.include
-
-+ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
-+KBUILD_CFLAGS_KERNEL += -ffunction-sections -fdata-sections
-+LDFLAGS_vmlinux += --gc-sections
-+endif
-+
- # Read KERNELRELEASE from include/config/kernel.release (if it exists)
- KERNELRELEASE = $(shell cat include/config/kernel.release 2> /dev/null)
- KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
-@@ -772,11 +777,6 @@ ifdef CONFIG_DEBUG_SECTION_MISMATCH
- KBUILD_CFLAGS += $(call cc-option, -fno-inline-functions-called-once)
- endif
-
--ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
--KBUILD_CFLAGS_KERNEL += -ffunction-sections -fdata-sections
--LDFLAGS_vmlinux += --gc-sections
--endif
--
- # arch Makefile may override CC so keep this after arch Makefile is included
- NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
-
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -98,6 +98,7 @@ config ARM
- select HAVE_UID16
- select HAVE_VIRT_CPU_ACCOUNTING_GEN
- select IRQ_FORCED_THREADING
-+ select HAVE_LD_DEAD_CODE_DATA_ELIMINATION
- select MODULES_USE_ELF_REL
- select NEED_DMA_MAP_STATE
- select NO_BOOTMEM
---- a/arch/arm/boot/compressed/Makefile
-+++ b/arch/arm/boot/compressed/Makefile
-@@ -106,6 +106,7 @@ ifeq ($(CONFIG_FUNCTION_TRACER),y)
- ORIG_CFLAGS := $(KBUILD_CFLAGS)
- KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
- endif
-+KBUILD_CFLAGS_KERNEL := $(patsubst -f%-sections,,$(KBUILD_CFLAGS_KERNEL))
-
- # -fstack-protector-strong triggers protection checks in this code,
- # but it is being used too early to link to meaningful stack_chk logic.
---- a/arch/arm/kernel/vmlinux.lds.S
-+++ b/arch/arm/kernel/vmlinux.lds.S
-@@ -100,24 +100,24 @@ SECTIONS
- }
- .init.arch.info : {
- __arch_info_begin = .;
-- *(.arch.info.init)
-+ KEEP(*(.arch.info.init))
- __arch_info_end = .;
- }
- .init.tagtable : {
- __tagtable_begin = .;
-- *(.taglist.init)
-+ KEEP(*(.taglist.init))
- __tagtable_end = .;
- }
- #ifdef CONFIG_SMP_ON_UP
- .init.smpalt : {
- __smpalt_begin = .;
-- *(.alt.smp.init)
-+ KEEP(*(.alt.smp.init))
- __smpalt_end = .;
- }
- #endif
- .init.pv_table : {
- __pv_table_begin = .;
-- *(.pv_table)
-+ KEEP(*(.pv_table))
- __pv_table_end = .;
- }
-
---- a/arch/arm/kernel/vmlinux.lds.h
-+++ b/arch/arm/kernel/vmlinux.lds.h
-@@ -22,13 +22,13 @@
- #define ARM_MMU_DISCARD(x)
- #else
- #define ARM_MMU_KEEP(x)
--#define ARM_MMU_DISCARD(x) x
-+#define ARM_MMU_DISCARD(x) KEEP(x)
- #endif
-
- #define PROC_INFO \
- . = ALIGN(4); \
- __proc_info_begin = .; \
-- *(.proc.info.init) \
-+ KEEP(*(.proc.info.init)) \
- __proc_info_end = .;
-
- #define HYPERVISOR_TEXT \
-@@ -39,11 +39,11 @@
- #define IDMAP_TEXT \
- ALIGN_FUNCTION(); \
- __idmap_text_start = .; \
-- *(.idmap.text) \
-+ KEEP(*(.idmap.text)) \
- __idmap_text_end = .; \
- . = ALIGN(PAGE_SIZE); \
- __hyp_idmap_text_start = .; \
-- *(.hyp.idmap.text) \
-+ KEEP(*(.hyp.idmap.text)) \
- __hyp_idmap_text_end = .;
-
- #define ARM_DISCARD \
-@@ -86,12 +86,12 @@
- . = ALIGN(8); \
- .ARM.unwind_idx : { \
- __start_unwind_idx = .; \
-- *(.ARM.exidx*) \
-+ KEEP(*(.ARM.exidx*)) \
- __stop_unwind_idx = .; \
- } \
- .ARM.unwind_tab : { \
- __start_unwind_tab = .; \
-- *(.ARM.extab*) \
-+ KEEP(*(.ARM.extab*)) \
- __stop_unwind_tab = .; \
- }
-
-@@ -102,14 +102,14 @@
- #define ARM_VECTORS \
- __vectors_start = .; \
- .vectors 0xffff0000 : AT(__vectors_start) { \
-- *(.vectors) \
-+ KEEP(*(.vectors)) \
- } \
- . = __vectors_start + SIZEOF(.vectors); \
- __vectors_end = .; \
- \
- __stubs_start = .; \
- .stubs ADDR(.vectors) + 0x1000 : AT(__stubs_start) { \
-- *(.stubs) \
-+ KEEP(*(.stubs)) \
- } \
- . = __stubs_start + SIZEOF(.stubs); \
- __stubs_end = .; \
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -43,6 +43,7 @@ config MIPS
- select HAVE_ARCH_TRANSPARENT_HUGEPAGE if CPU_SUPPORTS_HUGEPAGES && 64BIT
- select HAVE_CBPF_JIT if (!64BIT && !CPU_MICROMIPS)
- select HAVE_EBPF_JIT if (64BIT && !CPU_MICROMIPS)
-+ select HAVE_LD_DEAD_CODE_DATA_ELIMINATION
- select HAVE_CONTEXT_TRACKING
- select HAVE_COPY_THREAD_TLS
- select HAVE_C_RECORDMCOUNT
---- a/arch/mips/kernel/vmlinux.lds.S
-+++ b/arch/mips/kernel/vmlinux.lds.S
-@@ -72,7 +72,7 @@ SECTIONS
- /* Exception table for data bus errors */
- __dbe_table : {
- __start___dbe_table = .;
-- *(__dbe_table)
-+ KEEP(*(__dbe_table))
- __stop___dbe_table = .;
- }
-
-@@ -123,7 +123,7 @@ SECTIONS
- . = ALIGN(4);
- .mips.machines.init : AT(ADDR(.mips.machines.init) - LOAD_OFFSET) {
- __mips_machines_start = .;
-- *(.mips.machines.init)
-+ KEEP(*(.mips.machines.init))
- __mips_machines_end = .;
- }
-
+++ /dev/null
-From b14784e7883390c20ed3ff904892255404a5914b Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:05:53 +0200
-Subject: add an optional config option for stripping all unnecessary symbol exports from the kernel image
-
-lede-commit: bb5a40c64b7c4f4848509fa0a6625055fc9e66cc
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/asm-generic/vmlinux.lds.h | 18 +++++++++++++++---
- include/linux/export.h | 9 ++++++++-
- scripts/Makefile.build | 2 +-
- 3 files changed, 24 insertions(+), 5 deletions(-)
-
---- a/include/asm-generic/vmlinux.lds.h
-+++ b/include/asm-generic/vmlinux.lds.h
-@@ -54,6 +54,16 @@
- #define LOAD_OFFSET 0
- #endif
-
-+#ifndef SYMTAB_KEEP
-+#define SYMTAB_KEEP KEEP(*(SORT(___ksymtab+*)))
-+#define SYMTAB_KEEP_GPL KEEP(*(SORT(___ksymtab_gpl+*)))
-+#endif
-+
-+#ifndef SYMTAB_DISCARD
-+#define SYMTAB_DISCARD
-+#define SYMTAB_DISCARD_GPL
-+#endif
-+
- /* Align . to a 8 byte boundary equals to maximum function alignment. */
- #define ALIGN_FUNCTION() . = ALIGN(8)
-
-@@ -373,14 +383,14 @@
- /* Kernel symbol table: Normal symbols */ \
- __ksymtab : AT(ADDR(__ksymtab) - LOAD_OFFSET) { \
- __start___ksymtab = .; \
-- KEEP(*(SORT(___ksymtab+*))) \
-+ SYMTAB_KEEP \
- __stop___ksymtab = .; \
- } \
- \
- /* Kernel symbol table: GPL-only symbols */ \
- __ksymtab_gpl : AT(ADDR(__ksymtab_gpl) - LOAD_OFFSET) { \
- __start___ksymtab_gpl = .; \
-- KEEP(*(SORT(___ksymtab_gpl+*))) \
-+ SYMTAB_KEEP_GPL \
- __stop___ksymtab_gpl = .; \
- } \
- \
-@@ -442,7 +452,7 @@
- \
- /* Kernel symbol table: strings */ \
- __ksymtab_strings : AT(ADDR(__ksymtab_strings) - LOAD_OFFSET) { \
-- *(__ksymtab_strings) \
-+ *(__ksymtab_strings+*) \
- } \
- \
- /* __*init sections */ \
-@@ -844,6 +854,8 @@
- EXIT_TEXT \
- EXIT_DATA \
- EXIT_CALL \
-+ SYMTAB_DISCARD \
-+ SYMTAB_DISCARD_GPL \
- *(.discard) \
- *(.discard.*) \
- }
---- a/include/linux/export.h
-+++ b/include/linux/export.h
-@@ -74,12 +74,19 @@ struct kernel_symbol {
- };
- #endif
-
-+#ifdef MODULE
-+#define __EXPORT_SUFFIX(sym)
-+#else
-+#define __EXPORT_SUFFIX(sym) "+" #sym
-+#endif
-+
- /* For every exported symbol, place a struct in the __ksymtab section */
- #define ___EXPORT_SYMBOL(sym, sec) \
- extern typeof(sym) sym; \
- __CRC_SYMBOL(sym, sec) \
- static const char __kstrtab_##sym[] \
-- __attribute__((section("__ksymtab_strings"), used, aligned(1))) \
-+ __attribute__((section("__ksymtab_strings" \
-+ __EXPORT_SUFFIX(sym)), used, aligned(1))) \
- = #sym; \
- __KSYMTAB_ENTRY(sym, sec)
-
---- a/scripts/Makefile.build
-+++ b/scripts/Makefile.build
-@@ -408,7 +408,7 @@ targets += $(extra-y) $(MAKECMDGOALS) $(
- # Linker scripts preprocessor (.lds.S -> .lds)
- # ---------------------------------------------------------------------------
- quiet_cmd_cpp_lds_S = LDS $@
-- cmd_cpp_lds_S = $(CPP) $(cpp_flags) -P -U$(ARCH) \
-+ cmd_cpp_lds_S = $(CPP) $(EXTRA_LDSFLAGS) $(cpp_flags) -P -U$(ARCH) \
- -D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $<
-
- $(obj)/%.lds: $(src)/%.lds.S FORCE
+++ /dev/null
-From b3d00b452467f621317953d9e4c6f9ae8dcfd271 Mon Sep 17 00:00:00 2001
-From: Imre Kaloz <kaloz@openwrt.org>
-Date: Fri, 7 Jul 2017 17:06:55 +0200
-Subject: use the openwrt lzma options for now
-
-lede-commit: 548de949f392049420a6a1feeef118b30ab8ea8c
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
----
- lib/decompress.c | 1 +
- scripts/Makefile.lib | 2 +-
- usr/gen_initramfs_list.sh | 10 +++++-----
- 3 files changed, 7 insertions(+), 6 deletions(-)
-
---- a/lib/decompress.c
-+++ b/lib/decompress.c
-@@ -49,6 +49,7 @@ static const struct compress_format comp
- { {0x1f, 0x9e}, "gzip", gunzip },
- { {0x42, 0x5a}, "bzip2", bunzip2 },
- { {0x5d, 0x00}, "lzma", unlzma },
-+ { {0x6d, 0x00}, "lzma-openwrt", unlzma },
- { {0xfd, 0x37}, "xz", unxz },
- { {0x89, 0x4c}, "lzo", unlzo },
- { {0x02, 0x21}, "lz4", unlz4 },
---- a/scripts/Makefile.lib
-+++ b/scripts/Makefile.lib
-@@ -325,7 +325,7 @@ cmd_bzip2 = (cat $(filter-out FORCE,$^)
-
- quiet_cmd_lzma = LZMA $@
- cmd_lzma = (cat $(filter-out FORCE,$^) | \
-- lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
-+ lzma e -d20 -lc1 -lp2 -pb2 -eos -si -so && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
- (rm -f $@ ; false)
-
- quiet_cmd_lzo = LZO $@
---- a/usr/gen_initramfs_list.sh
-+++ b/usr/gen_initramfs_list.sh
-@@ -229,7 +229,7 @@ cpio_list=
- output="/dev/stdout"
- output_file=""
- is_cpio_compressed=
--compr="gzip -n -9 -f"
-+compr="gzip -n -9 -f -"
-
- arg="$1"
- case "$arg" in
-@@ -245,13 +245,13 @@ case "$arg" in
- output=${cpio_list}
- echo "$output_file" | grep -q "\.gz$" \
- && [ -x "`which gzip 2> /dev/null`" ] \
-- && compr="gzip -n -9 -f"
-+ && compr="gzip -n -9 -f -"
- echo "$output_file" | grep -q "\.bz2$" \
- && [ -x "`which bzip2 2> /dev/null`" ] \
-- && compr="bzip2 -9 -f"
-+ && compr="bzip2 -9 -f -"
- echo "$output_file" | grep -q "\.lzma$" \
- && [ -x "`which lzma 2> /dev/null`" ] \
-- && compr="lzma -9 -f"
-+ && compr="lzma e -d20 -lc1 -lp2 -pb2 -eos -si -so"
- echo "$output_file" | grep -q "\.xz$" \
- && [ -x "`which xz 2> /dev/null`" ] \
- && compr="xz --check=crc32 --lzma2=dict=1MiB"
-@@ -320,7 +320,7 @@ if [ ! -z ${output_file} ]; then
- if [ "${is_cpio_compressed}" = "compressed" ]; then
- cat ${cpio_tfile} > ${output_file}
- else
-- (cat ${cpio_tfile} | ${compr} - > ${output_file}) \
-+ (cat ${cpio_tfile} | ${compr} > ${output_file}) \
- || (rm -f ${output_file} ; false)
- fi
- [ -z ${cpio_file} ] && rm ${cpio_tfile}
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Subject: hack: net: remove bogus netfilter dependencies
-
-lede-commit: 589d2a377dee27d206fc3725325309cf649e4df6
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/netfilter/Kconfig | 2 --
- 1 file changed, 2 deletions(-)
-
---- a/net/netfilter/Kconfig
-+++ b/net/netfilter/Kconfig
-@@ -241,7 +241,6 @@ config NF_CONNTRACK_FTP
-
- config NF_CONNTRACK_H323
- tristate "H.323 protocol support"
-- depends on IPV6 || IPV6=n
- depends on NETFILTER_ADVANCED
- help
- H.323 is a VoIP signalling protocol from ITU-T. As one of the most
-@@ -1077,7 +1076,6 @@ config NETFILTER_XT_TARGET_SECMARK
-
- config NETFILTER_XT_TARGET_TCPMSS
- tristate '"TCPMSS" target support'
-- depends on IPV6 || IPV6=n
- default m if NETFILTER_ADVANCED=n
- ---help---
- This option adds a `TCPMSS' target, which allows you to alter the
+++ /dev/null
-From da3c50704f14132f4adf80d48e9a4cd5d46e54c9 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Fri, 7 Jul 2017 17:09:21 +0200
-Subject: kconfig: owrt specifc dependencies
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- crypto/Kconfig | 10 +++++-----
- drivers/bcma/Kconfig | 1 +
- drivers/ssb/Kconfig | 3 ++-
- lib/Kconfig | 8 ++++----
- net/netfilter/Kconfig | 2 +-
- net/wireless/Kconfig | 17 ++++++++++-------
- sound/core/Kconfig | 4 ++--
- 7 files changed, 25 insertions(+), 20 deletions(-)
-
---- a/crypto/Kconfig
-+++ b/crypto/Kconfig
-@@ -33,7 +33,7 @@ config CRYPTO_FIPS
- this is.
-
- config CRYPTO_ALGAPI
-- tristate
-+ tristate "ALGAPI"
- select CRYPTO_ALGAPI2
- help
- This option provides the API for cryptographic algorithms.
-@@ -42,7 +42,7 @@ config CRYPTO_ALGAPI2
- tristate
-
- config CRYPTO_AEAD
-- tristate
-+ tristate "AEAD"
- select CRYPTO_AEAD2
- select CRYPTO_ALGAPI
-
-@@ -53,7 +53,7 @@ config CRYPTO_AEAD2
- select CRYPTO_RNG2
-
- config CRYPTO_BLKCIPHER
-- tristate
-+ tristate "BLKCIPHER"
- select CRYPTO_BLKCIPHER2
- select CRYPTO_ALGAPI
-
-@@ -64,7 +64,7 @@ config CRYPTO_BLKCIPHER2
- select CRYPTO_WORKQUEUE
-
- config CRYPTO_HASH
-- tristate
-+ tristate "HASH"
- select CRYPTO_HASH2
- select CRYPTO_ALGAPI
-
-@@ -73,7 +73,7 @@ config CRYPTO_HASH2
- select CRYPTO_ALGAPI2
-
- config CRYPTO_RNG
-- tristate
-+ tristate "RNG"
- select CRYPTO_RNG2
- select CRYPTO_ALGAPI
-
---- a/drivers/bcma/Kconfig
-+++ b/drivers/bcma/Kconfig
-@@ -16,6 +16,7 @@ if BCMA
- # Support for Block-I/O. SELECT this from the driver that needs it.
- config BCMA_BLOCKIO
- bool
-+ default y
-
- config BCMA_HOST_PCI_POSSIBLE
- bool
---- a/drivers/ssb/Kconfig
-+++ b/drivers/ssb/Kconfig
-@@ -28,6 +28,7 @@ config SSB_SPROM
- config SSB_BLOCKIO
- bool
- depends on SSB
-+ default y
-
- config SSB_PCIHOST_POSSIBLE
- bool
-@@ -48,7 +49,7 @@ config SSB_PCIHOST
- config SSB_B43_PCI_BRIDGE
- bool
- depends on SSB_PCIHOST
-- default n
-+ default y
-
- config SSB_PCMCIAHOST_POSSIBLE
- bool
---- a/lib/Kconfig
-+++ b/lib/Kconfig
-@@ -377,16 +377,16 @@ config BCH_CONST_T
- # Textsearch support is select'ed if needed
- #
- config TEXTSEARCH
-- bool
-+ bool "Textsearch support"
-
- config TEXTSEARCH_KMP
-- tristate
-+ tristate "Textsearch KMP"
-
- config TEXTSEARCH_BM
-- tristate
-+ tristate "Textsearch BM"
-
- config TEXTSEARCH_FSM
-- tristate
-+ tristate "Textsearch FSM"
-
- config BTREE
- bool
---- a/net/netfilter/Kconfig
-+++ b/net/netfilter/Kconfig
-@@ -10,7 +10,7 @@ config NETFILTER_INGRESS
- infrastructure.
-
- config NETFILTER_NETLINK
-- tristate
-+ tristate "Netfilter NFNETLINK interface"
-
- config NETFILTER_FAMILY_BRIDGE
- bool
---- a/net/wireless/Kconfig
-+++ b/net/wireless/Kconfig
-@@ -1,5 +1,5 @@
- config WIRELESS_EXT
-- bool
-+ bool "Wireless extensions"
-
- config WEXT_CORE
- def_bool y
-@@ -11,10 +11,10 @@ config WEXT_PROC
- depends on WEXT_CORE
-
- config WEXT_SPY
-- bool
-+ bool "WEXT_SPY"
-
- config WEXT_PRIV
-- bool
-+ bool "WEXT_PRIV"
-
- config CFG80211
- tristate "cfg80211 - wireless configuration API"
-@@ -202,7 +202,7 @@ config CFG80211_WEXT_EXPORT
- endif # CFG80211
-
- config LIB80211
-- tristate
-+ tristate "LIB80211"
- default n
- help
- This options enables a library of common routines used
-@@ -211,13 +211,16 @@ config LIB80211
- Drivers should select this themselves if needed.
-
- config LIB80211_CRYPT_WEP
-- tristate
-+ tristate "LIB80211_CRYPT_WEP"
-+ select LIB80211
-
- config LIB80211_CRYPT_CCMP
-- tristate
-+ tristate "LIB80211_CRYPT_CCMP"
-+ select LIB80211
-
- config LIB80211_CRYPT_TKIP
-- tristate
-+ tristate "LIB80211_CRYPT_TKIP"
-+ select LIB80211
-
- config LIB80211_DEBUG
- bool "lib80211 debugging messages"
---- a/sound/core/Kconfig
-+++ b/sound/core/Kconfig
-@@ -16,7 +16,7 @@ config SND_DMAENGINE_PCM
- tristate
-
- config SND_HWDEP
-- tristate
-+ tristate "Sound hardware support"
-
- config SND_SEQ_DEVICE
- tristate
-@@ -26,7 +26,7 @@ config SND_RAWMIDI
- select SND_SEQ_DEVICE if SND_SEQUENCER != n
-
- config SND_COMPRESS_OFFLOAD
-- tristate
-+ tristate "Compression offloading support"
-
- config SND_JACK
- bool
+++ /dev/null
-From 811d9e2268a62b830cfe93cd8bc929afcb8b198b Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 15 Jul 2017 21:12:38 +0200
-Subject: kernel: move regmap bloat out of the kernel image if it is only being used in modules
-
-lede-commit: 96f39119815028073583e4fca3a9c5fe9141e998
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/base/regmap/Kconfig | 15 ++++++++++-----
- drivers/base/regmap/Makefile | 12 ++++++++----
- drivers/base/regmap/regmap.c | 3 +++
- include/linux/regmap.h | 2 +-
- 4 files changed, 22 insertions(+), 10 deletions(-)
-
---- a/drivers/base/regmap/Kconfig
-+++ b/drivers/base/regmap/Kconfig
-@@ -4,9 +4,8 @@
- # subsystems should select the appropriate symbols.
-
- config REGMAP
-- default y if (REGMAP_I2C || REGMAP_SPI || REGMAP_SPMI || REGMAP_W1 || REGMAP_AC97 || REGMAP_MMIO || REGMAP_IRQ)
- select IRQ_DOMAIN if REGMAP_IRQ
-- bool
-+ tristate
-
- config REGCACHE_COMPRESSED
- select LZO_COMPRESS
-@@ -18,6 +17,7 @@ config REGMAP_AC97
-
- config REGMAP_I2C
- tristate
-+ select REGMAP
- depends on I2C
-
- config REGMAP_SLIMBUS
-@@ -26,20 +26,26 @@ config REGMAP_SLIMBUS
-
- config REGMAP_SPI
- tristate
-+ select REGMAP
-+ depends on SPI_MASTER
- depends on SPI
-
- config REGMAP_SPMI
-+ select REGMAP
- tristate
- depends on SPMI
-
- config REGMAP_W1
-+ select REGMAP
- tristate
- depends on W1
-
- config REGMAP_MMIO
- tristate
-+ select REGMAP
-
- config REGMAP_IRQ
-+ select REGMAP
- bool
-
- config REGMAP_SOUNDWIRE
---- a/drivers/base/regmap/Makefile
-+++ b/drivers/base/regmap/Makefile
-@@ -2,10 +2,14 @@
- # For include/trace/define_trace.h to include trace.h
- CFLAGS_regmap.o := -I$(src)
-
--obj-$(CONFIG_REGMAP) += regmap.o regcache.o
--obj-$(CONFIG_REGMAP) += regcache-rbtree.o regcache-flat.o
--obj-$(CONFIG_REGCACHE_COMPRESSED) += regcache-lzo.o
--obj-$(CONFIG_DEBUG_FS) += regmap-debugfs.o
-+regmap-core-objs = regmap.o regcache.o regcache-rbtree.o regcache-flat.o
-+ifdef CONFIG_DEBUG_FS
-+regmap-core-objs += regmap-debugfs.o
-+endif
-+ifdef CONFIG_REGCACHE_COMPRESSED
-+regmap-core-objs += regcache-lzo.o
-+endif
-+obj-$(CONFIG_REGMAP) += regmap-core.o
- obj-$(CONFIG_REGMAP_AC97) += regmap-ac97.o
- obj-$(CONFIG_REGMAP_I2C) += regmap-i2c.o
- obj-$(CONFIG_REGMAP_SLIMBUS) += regmap-slimbus.o
---- a/drivers/base/regmap/regmap.c
-+++ b/drivers/base/regmap/regmap.c
-@@ -13,6 +13,7 @@
- #include <linux/device.h>
- #include <linux/slab.h>
- #include <linux/export.h>
-+#include <linux/module.h>
- #include <linux/mutex.h>
- #include <linux/err.h>
- #include <linux/of.h>
-@@ -3032,3 +3033,5 @@ static int __init regmap_initcall(void)
- return 0;
- }
- postcore_initcall(regmap_initcall);
-+
-+MODULE_LICENSE("GPL");
---- a/include/linux/regmap.h
-+++ b/include/linux/regmap.h
-@@ -187,7 +187,7 @@ struct reg_sequence {
- pollret ?: ((cond) ? 0 : -ETIMEDOUT); \
- })
-
--#ifdef CONFIG_REGMAP
-+#if IS_REACHABLE(CONFIG_REGMAP)
-
- enum regmap_endian {
- /* Unspecified -> 0 -> Backwards compatible default */
+++ /dev/null
-From fd1799b0bf5efa46dd3e6dfbbf3955564807e508 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:12:51 +0200
-Subject: kernel: prevent cryptomgr from pulling in useless extra dependencies for tests that are not run
-
-Reduces kernel size after LZMA by about 5k on MIPS
-
-lede-commit: 044c316167e076479a344c59905e5b435b84a77f
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- crypto/Kconfig | 13 ++++++-------
- crypto/algboss.c | 4 ++++
- 2 files changed, 10 insertions(+), 7 deletions(-)
-
---- a/crypto/Kconfig
-+++ b/crypto/Kconfig
-@@ -144,13 +144,13 @@ config CRYPTO_MANAGER
- cbc(aes).
-
- config CRYPTO_MANAGER2
-- def_tristate CRYPTO_MANAGER || (CRYPTO_MANAGER!=n && CRYPTO_ALGAPI=y)
-- select CRYPTO_AEAD2
-- select CRYPTO_HASH2
-- select CRYPTO_BLKCIPHER2
-- select CRYPTO_AKCIPHER2
-- select CRYPTO_KPP2
-- select CRYPTO_ACOMP2
-+ def_tristate CRYPTO_MANAGER || (CRYPTO_MANAGER!=n && CRYPTO_ALGAPI=y && !CRYPTO_MANAGER_DISABLE_TESTS)
-+ select CRYPTO_AEAD2 if !CRYPTO_MANAGER_DISABLE_TESTS
-+ select CRYPTO_HASH2 if !CRYPTO_MANAGER_DISABLE_TESTS
-+ select CRYPTO_BLKCIPHER2 if !CRYPTO_MANAGER_DISABLE_TESTS
-+ select CRYPTO_AKCIPHER2 if !CRYPTO_MANAGER_DISABLE_TESTS
-+ select CRYPTO_KPP2 if !CRYPTO_MANAGER_DISABLE_TESTS
-+ select CRYPTO_ACOMP2 if !CRYPTO_MANAGER_DISABLE_TESTS
-
- config CRYPTO_USER
- tristate "Userspace cryptographic algorithm configuration"
-@@ -163,7 +163,6 @@ config CRYPTO_USER
- config CRYPTO_MANAGER_DISABLE_TESTS
- bool "Disable run-time self tests"
- default y
-- depends on CRYPTO_MANAGER2
- help
- Disable run-time self tests that normally take place at
- algorithm registration.
---- a/crypto/algboss.c
-+++ b/crypto/algboss.c
-@@ -245,8 +245,12 @@ static int cryptomgr_schedule_test(struc
- type = alg->cra_flags;
-
- /* Do not test internal algorithms. */
-+#ifdef CONFIG_CRYPTO_MANAGER_DISABLE_TESTS
-+ type |= CRYPTO_ALG_TESTED;
-+#else
- if (type & CRYPTO_ALG_INTERNAL)
- type |= CRYPTO_ALG_TESTED;
-+#endif
-
- param->type = type;
-
+++ /dev/null
-From 236c1acdfef5958010ac9814a9872e0a46fd78ee Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Fri, 7 Jul 2017 17:13:44 +0200
-Subject: rfkill: add fake rfkill support
-
-allow building of modules depending on RFKILL even if RFKILL is not enabled.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- include/linux/rfkill.h | 2 +-
- net/Makefile | 2 +-
- net/rfkill/Kconfig | 14 +++++++++-----
- net/rfkill/Makefile | 2 +-
- 4 files changed, 12 insertions(+), 8 deletions(-)
-
---- a/include/linux/rfkill.h
-+++ b/include/linux/rfkill.h
-@@ -64,7 +64,7 @@ struct rfkill_ops {
- int (*set_block)(void *data, bool blocked);
- };
-
--#if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
-+#if defined(CONFIG_RFKILL_FULL) || defined(CONFIG_RFKILL_FULL_MODULE)
- /**
- * rfkill_alloc - Allocate rfkill structure
- * @name: name of the struct -- the string is not copied internally
---- a/net/Makefile
-+++ b/net/Makefile
-@@ -53,7 +53,7 @@ obj-$(CONFIG_TIPC) += tipc/
- obj-$(CONFIG_NETLABEL) += netlabel/
- obj-$(CONFIG_IUCV) += iucv/
- obj-$(CONFIG_SMC) += smc/
--obj-$(CONFIG_RFKILL) += rfkill/
-+obj-$(CONFIG_RFKILL_FULL) += rfkill/
- obj-$(CONFIG_NET_9P) += 9p/
- obj-$(CONFIG_CAIF) += caif/
- ifneq ($(CONFIG_DCB),)
---- a/net/rfkill/Kconfig
-+++ b/net/rfkill/Kconfig
-@@ -1,7 +1,11 @@
- #
- # RF switch subsystem configuration
- #
--menuconfig RFKILL
-+config RFKILL
-+ bool
-+ default y
-+
-+menuconfig RFKILL_FULL
- tristate "RF switch subsystem support"
- help
- Say Y here if you want to have control over RF switches
-@@ -13,19 +17,19 @@ menuconfig RFKILL
- # LED trigger support
- config RFKILL_LEDS
- bool
-- depends on RFKILL
-+ depends on RFKILL_FULL
- depends on LEDS_TRIGGERS = y || RFKILL = LEDS_TRIGGERS
- default y
-
- config RFKILL_INPUT
- bool "RF switch input support" if EXPERT
-- depends on RFKILL
-+ depends on RFKILL_FULL
- depends on INPUT = y || RFKILL = INPUT
- default y if !EXPERT
-
- config RFKILL_GPIO
- tristate "GPIO RFKILL driver"
-- depends on RFKILL
-+ depends on RFKILL_FULL
- depends on GPIOLIB || COMPILE_TEST
- default n
- help
---- a/net/rfkill/Makefile
-+++ b/net/rfkill/Makefile
-@@ -4,5 +4,5 @@
-
- rfkill-y += core.o
- rfkill-$(CONFIG_RFKILL_INPUT) += input.o
--obj-$(CONFIG_RFKILL) += rfkill.o
-+obj-$(CONFIG_RFKILL_FULL) += rfkill.o
- obj-$(CONFIG_RFKILL_GPIO) += rfkill-gpio.o
+++ /dev/null
-From 2579d9b982c7232f9354bcca5262e26a84c38799 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Fri, 2 Nov 2018 17:40:32 +0100
-Subject: [PATCH] nvmem: make CONFIG_NVMEM tristate again
-
-Only build it in when OF_NET is selected and make it possible to build
-it as module otherwise.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/nvmem/Kconfig | 2 +-
- drivers/of/Kconfig | 1 +
- 2 files changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/nvmem/Kconfig
-+++ b/drivers/nvmem/Kconfig
-@@ -1,5 +1,5 @@
- menuconfig NVMEM
-- bool "NVMEM Support"
-+ tristate "NVMEM Support"
- help
- Support for NVMEM(Non Volatile Memory) devices like EEPROM, EFUSES...
-
---- a/drivers/of/Kconfig
-+++ b/drivers/of/Kconfig
-@@ -71,6 +71,7 @@ config OF_IRQ
-
- config OF_NET
- depends on NETDEVICES
-+ select NVMEM
- def_bool y
-
- config OF_MDIO
+++ /dev/null
-From: Ben Menchaca <ben.menchaca@qca.qualcomm.com>
-Date: Fri, 7 Jun 2013 18:35:22 -0500
-Subject: MIPS: r4k_cache: use more efficient cache blast
-
-Optimize the compiler output for larger cache blast cases that are
-common for DMA-based networking.
-
-Signed-off-by: Ben Menchaca <ben.menchaca@qca.qualcomm.com>
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
---- a/arch/mips/include/asm/r4kcache.h
-+++ b/arch/mips/include/asm/r4kcache.h
-@@ -683,16 +683,48 @@ static inline void prot##extra##blast_##
- unsigned long end) \
- { \
- unsigned long lsize = cpu_##desc##_line_size(); \
-+ unsigned long lsize_2 = lsize * 2; \
-+ unsigned long lsize_3 = lsize * 3; \
-+ unsigned long lsize_4 = lsize * 4; \
-+ unsigned long lsize_5 = lsize * 5; \
-+ unsigned long lsize_6 = lsize * 6; \
-+ unsigned long lsize_7 = lsize * 7; \
-+ unsigned long lsize_8 = lsize * 8; \
- unsigned long addr = start & ~(lsize - 1); \
-- unsigned long aend = (end - 1) & ~(lsize - 1); \
-+ unsigned long aend = (end + lsize - 1) & ~(lsize - 1); \
-+ int lines = (aend - addr) / lsize; \
- \
- __##pfx##flush_prologue \
- \
-- while (1) { \
-+ while (lines >= 8) { \
-+ prot##cache_op(hitop, addr); \
-+ prot##cache_op(hitop, addr + lsize); \
-+ prot##cache_op(hitop, addr + lsize_2); \
-+ prot##cache_op(hitop, addr + lsize_3); \
-+ prot##cache_op(hitop, addr + lsize_4); \
-+ prot##cache_op(hitop, addr + lsize_5); \
-+ prot##cache_op(hitop, addr + lsize_6); \
-+ prot##cache_op(hitop, addr + lsize_7); \
-+ addr += lsize_8; \
-+ lines -= 8; \
-+ } \
-+ \
-+ if (lines & 0x4) { \
-+ prot##cache_op(hitop, addr); \
-+ prot##cache_op(hitop, addr + lsize); \
-+ prot##cache_op(hitop, addr + lsize_2); \
-+ prot##cache_op(hitop, addr + lsize_3); \
-+ addr += lsize_4; \
-+ } \
-+ \
-+ if (lines & 0x2) { \
-+ prot##cache_op(hitop, addr); \
-+ prot##cache_op(hitop, addr + lsize); \
-+ addr += lsize_2; \
-+ } \
-+ \
-+ if (lines & 0x1) { \
- prot##cache_op(hitop, addr); \
-- if (addr == aend) \
-- break; \
-- addr += lsize; \
- } \
- \
- __##pfx##flush_epilogue \
+++ /dev/null
-From: John Crispin <john@phrozen.org>
-Subject: hack: kernel: add generic image_cmdline hack to MIPS targets
-
-lede-commit: d59f5b3a987a48508257a0ddbaeadc7909f9f976
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- arch/mips/Kconfig | 4 ++++
- arch/mips/kernel/head.S | 6 ++++++
- 2 files changed, 10 insertions(+)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -1144,6 +1144,10 @@ config SYNC_R4K
- config MIPS_MACHINE
- def_bool n
-
-+config IMAGE_CMDLINE_HACK
-+ bool "OpenWrt specific image command line hack"
-+ default n
-+
- config NO_IOPORT_MAP
- def_bool n
-
---- a/arch/mips/kernel/head.S
-+++ b/arch/mips/kernel/head.S
-@@ -79,6 +79,12 @@ FEXPORT(__kernel_entry)
- j kernel_entry
- #endif
-
-+#ifdef CONFIG_IMAGE_CMDLINE_HACK
-+ .ascii "CMDLINE:"
-+EXPORT(__image_cmdline)
-+ .fill 0x400
-+#endif /* CONFIG_IMAGE_CMDLINE_HACK */
-+
- __REF
-
- NESTED(kernel_entry, 16, sp) # kernel entry point
+++ /dev/null
-From 107c0964cb8db7ca28ac5199426414fdab3c274d Mon Sep 17 00:00:00 2001
-From: "Alexandros C. Couloumbis" <alex@ozo.com>
-Date: Fri, 7 Jul 2017 17:14:51 +0200
-Subject: hack: arch: powerpc: drop register save/restore library from modules
-
-Upstream GCC uses a libgcc function for saving/restoring registers. This
-makes the code bigger, and upstream kernels need to carry that function
-for every single kernel module. Our GCC is patched to avoid those
-references, so we can drop the extra bloat for modules.
-
-lede-commit: e8e1084654f50904e6bf77b70b2de3f137d7b3ec
-Signed-off-by: Alexandros C. Couloumbis <alex@ozo.com>
----
- arch/powerpc/Makefile | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/arch/powerpc/Makefile
-+++ b/arch/powerpc/Makefile
-@@ -60,20 +60,6 @@ machine-$(CONFIG_PPC64) += 64
- machine-$(CONFIG_CPU_LITTLE_ENDIAN) += le
- UTS_MACHINE := $(subst $(space),,$(machine-y))
-
--# XXX This needs to be before we override LD below
--ifdef CONFIG_PPC32
--KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
--else
--KBUILD_LDFLAGS_MODULE += -T $(srctree)/arch/powerpc/kernel/module.lds
--ifeq ($(call ld-ifversion, -ge, 225000000, y),y)
--# Have the linker provide sfpr if possible.
--# There is a corresponding test in arch/powerpc/lib/Makefile
--KBUILD_LDFLAGS_MODULE += --save-restore-funcs
--else
--KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
--endif
--endif
--
- ifdef CONFIG_CPU_LITTLE_ENDIAN
- KBUILD_CFLAGS += -mlittle-endian
- KBUILD_LDFLAGS += -EL
+++ /dev/null
-From 3fd297761ac246c54d7723c57fca95c112b99465 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 15 Jul 2017 21:15:44 +0200
-Subject: lzma: de-bloat the lzma library used by jffs2
-
-lede-commit: 3fd1dd08fbcbb78b34efefd32c3032e5c99108d6
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/lzma/LzFind.h | 17 ---
- include/linux/lzma/LzmaDec.h | 101 ---------------
- include/linux/lzma/LzmaEnc.h | 20 ---
- lib/lzma/LzFind.c | 287 ++++---------------------------------------
- lib/lzma/LzmaDec.c | 86 +------------
- lib/lzma/LzmaEnc.c | 172 ++------------------------
- 6 files changed, 42 insertions(+), 641 deletions(-)
-
---- a/include/linux/lzma/LzFind.h
-+++ b/include/linux/lzma/LzFind.h
-@@ -55,11 +55,6 @@ typedef struct _CMatchFinder
-
- #define Inline_MatchFinder_GetNumAvailableBytes(p) ((p)->streamPos - (p)->pos)
-
--int MatchFinder_NeedMove(CMatchFinder *p);
--Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p);
--void MatchFinder_MoveBlock(CMatchFinder *p);
--void MatchFinder_ReadIfRequired(CMatchFinder *p);
--
- void MatchFinder_Construct(CMatchFinder *p);
-
- /* Conditions:
-@@ -70,12 +65,6 @@ int MatchFinder_Create(CMatchFinder *p,
- UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter,
- ISzAlloc *alloc);
- void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc);
--void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems);
--void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue);
--
--UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *buffer, CLzRef *son,
-- UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 _cutValue,
-- UInt32 *distances, UInt32 maxLen);
-
- /*
- Conditions:
-@@ -102,12 +91,6 @@ typedef struct _IMatchFinder
-
- void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable);
-
--void MatchFinder_Init(CMatchFinder *p);
--UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
--UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
--void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
--void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
--
- #ifdef __cplusplus
- }
- #endif
---- a/include/linux/lzma/LzmaDec.h
-+++ b/include/linux/lzma/LzmaDec.h
-@@ -31,14 +31,6 @@ typedef struct _CLzmaProps
- UInt32 dicSize;
- } CLzmaProps;
-
--/* LzmaProps_Decode - decodes properties
--Returns:
-- SZ_OK
-- SZ_ERROR_UNSUPPORTED - Unsupported properties
--*/
--
--SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size);
--
-
- /* ---------- LZMA Decoder state ---------- */
-
-@@ -70,8 +62,6 @@ typedef struct
-
- #define LzmaDec_Construct(p) { (p)->dic = 0; (p)->probs = 0; }
-
--void LzmaDec_Init(CLzmaDec *p);
--
- /* There are two types of LZMA streams:
- 0) Stream with end mark. That end mark adds about 6 bytes to compressed size.
- 1) Stream without end mark. You must know exact uncompressed size to decompress such stream. */
-@@ -108,97 +98,6 @@ typedef enum
-
- /* ELzmaStatus is used only as output value for function call */
-
--
--/* ---------- Interfaces ---------- */
--
--/* There are 3 levels of interfaces:
-- 1) Dictionary Interface
-- 2) Buffer Interface
-- 3) One Call Interface
-- You can select any of these interfaces, but don't mix functions from different
-- groups for same object. */
--
--
--/* There are two variants to allocate state for Dictionary Interface:
-- 1) LzmaDec_Allocate / LzmaDec_Free
-- 2) LzmaDec_AllocateProbs / LzmaDec_FreeProbs
-- You can use variant 2, if you set dictionary buffer manually.
-- For Buffer Interface you must always use variant 1.
--
--LzmaDec_Allocate* can return:
-- SZ_OK
-- SZ_ERROR_MEM - Memory allocation error
-- SZ_ERROR_UNSUPPORTED - Unsupported properties
--*/
--
--SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc);
--void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc);
--
--SRes LzmaDec_Allocate(CLzmaDec *state, const Byte *prop, unsigned propsSize, ISzAlloc *alloc);
--void LzmaDec_Free(CLzmaDec *state, ISzAlloc *alloc);
--
--/* ---------- Dictionary Interface ---------- */
--
--/* You can use it, if you want to eliminate the overhead for data copying from
-- dictionary to some other external buffer.
-- You must work with CLzmaDec variables directly in this interface.
--
-- STEPS:
-- LzmaDec_Constr()
-- LzmaDec_Allocate()
-- for (each new stream)
-- {
-- LzmaDec_Init()
-- while (it needs more decompression)
-- {
-- LzmaDec_DecodeToDic()
-- use data from CLzmaDec::dic and update CLzmaDec::dicPos
-- }
-- }
-- LzmaDec_Free()
--*/
--
--/* LzmaDec_DecodeToDic
--
-- The decoding to internal dictionary buffer (CLzmaDec::dic).
-- You must manually update CLzmaDec::dicPos, if it reaches CLzmaDec::dicBufSize !!!
--
--finishMode:
-- It has meaning only if the decoding reaches output limit (dicLimit).
-- LZMA_FINISH_ANY - Decode just dicLimit bytes.
-- LZMA_FINISH_END - Stream must be finished after dicLimit.
--
--Returns:
-- SZ_OK
-- status:
-- LZMA_STATUS_FINISHED_WITH_MARK
-- LZMA_STATUS_NOT_FINISHED
-- LZMA_STATUS_NEEDS_MORE_INPUT
-- LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
-- SZ_ERROR_DATA - Data error
--*/
--
--SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit,
-- const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
--
--
--/* ---------- Buffer Interface ---------- */
--
--/* It's zlib-like interface.
-- See LzmaDec_DecodeToDic description for information about STEPS and return results,
-- but you must use LzmaDec_DecodeToBuf instead of LzmaDec_DecodeToDic and you don't need
-- to work with CLzmaDec variables manually.
--
--finishMode:
-- It has meaning only if the decoding reaches output limit (*destLen).
-- LZMA_FINISH_ANY - Decode just destLen bytes.
-- LZMA_FINISH_END - Stream must be finished after (*destLen).
--*/
--
--SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen,
-- const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
--
--
- /* ---------- One Call Interface ---------- */
-
- /* LzmaDecode
---- a/include/linux/lzma/LzmaEnc.h
-+++ b/include/linux/lzma/LzmaEnc.h
-@@ -31,9 +31,6 @@ typedef struct _CLzmaEncProps
- } CLzmaEncProps;
-
- void LzmaEncProps_Init(CLzmaEncProps *p);
--void LzmaEncProps_Normalize(CLzmaEncProps *p);
--UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2);
--
-
- /* ---------- CLzmaEncHandle Interface ---------- */
-
-@@ -53,26 +50,9 @@ CLzmaEncHandle LzmaEnc_Create(ISzAlloc *
- void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig);
- SRes LzmaEnc_SetProps(CLzmaEncHandle p, const CLzmaEncProps *props);
- SRes LzmaEnc_WriteProperties(CLzmaEncHandle p, Byte *properties, SizeT *size);
--SRes LzmaEnc_Encode(CLzmaEncHandle p, ISeqOutStream *outStream, ISeqInStream *inStream,
-- ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
- SRes LzmaEnc_MemEncode(CLzmaEncHandle p, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
- int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
-
--/* ---------- One Call Interface ---------- */
--
--/* LzmaEncode
--Return code:
-- SZ_OK - OK
-- SZ_ERROR_MEM - Memory allocation error
-- SZ_ERROR_PARAM - Incorrect paramater
-- SZ_ERROR_OUTPUT_EOF - output buffer overflow
-- SZ_ERROR_THREAD - errors in multithreading functions (only for Mt version)
--*/
--
--SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
-- const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
-- ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
--
- #ifdef __cplusplus
- }
- #endif
---- a/lib/lzma/LzFind.c
-+++ b/lib/lzma/LzFind.c
-@@ -14,9 +14,15 @@
-
- #define kStartMaxLen 3
-
-+#if 0
-+#define DIRECT_INPUT p->directInput
-+#else
-+#define DIRECT_INPUT 1
-+#endif
-+
- static void LzInWindow_Free(CMatchFinder *p, ISzAlloc *alloc)
- {
-- if (!p->directInput)
-+ if (!DIRECT_INPUT)
- {
- alloc->Free(alloc, p->bufferBase);
- p->bufferBase = 0;
-@@ -28,7 +34,7 @@ static void LzInWindow_Free(CMatchFinder
- static int LzInWindow_Create(CMatchFinder *p, UInt32 keepSizeReserv, ISzAlloc *alloc)
- {
- UInt32 blockSize = p->keepSizeBefore + p->keepSizeAfter + keepSizeReserv;
-- if (p->directInput)
-+ if (DIRECT_INPUT)
- {
- p->blockSize = blockSize;
- return 1;
-@@ -42,12 +48,12 @@ static int LzInWindow_Create(CMatchFinde
- return (p->bufferBase != 0);
- }
-
--Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p) { return p->buffer; }
--Byte MatchFinder_GetIndexByte(CMatchFinder *p, Int32 index) { return p->buffer[index]; }
-+static Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p) { return p->buffer; }
-+static Byte MatchFinder_GetIndexByte(CMatchFinder *p, Int32 index) { return p->buffer[index]; }
-
--UInt32 MatchFinder_GetNumAvailableBytes(CMatchFinder *p) { return p->streamPos - p->pos; }
-+static UInt32 MatchFinder_GetNumAvailableBytes(CMatchFinder *p) { return p->streamPos - p->pos; }
-
--void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue)
-+static void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue)
- {
- p->posLimit -= subValue;
- p->pos -= subValue;
-@@ -58,7 +64,7 @@ static void MatchFinder_ReadBlock(CMatch
- {
- if (p->streamEndWasReached || p->result != SZ_OK)
- return;
-- if (p->directInput)
-+ if (DIRECT_INPUT)
- {
- UInt32 curSize = 0xFFFFFFFF - p->streamPos;
- if (curSize > p->directInputRem)
-@@ -89,7 +95,7 @@ static void MatchFinder_ReadBlock(CMatch
- }
- }
-
--void MatchFinder_MoveBlock(CMatchFinder *p)
-+static void MatchFinder_MoveBlock(CMatchFinder *p)
- {
- memmove(p->bufferBase,
- p->buffer - p->keepSizeBefore,
-@@ -97,22 +103,14 @@ void MatchFinder_MoveBlock(CMatchFinder
- p->buffer = p->bufferBase + p->keepSizeBefore;
- }
-
--int MatchFinder_NeedMove(CMatchFinder *p)
-+static int MatchFinder_NeedMove(CMatchFinder *p)
- {
-- if (p->directInput)
-+ if (DIRECT_INPUT)
- return 0;
- /* if (p->streamEndWasReached) return 0; */
- return ((size_t)(p->bufferBase + p->blockSize - p->buffer) <= p->keepSizeAfter);
- }
-
--void MatchFinder_ReadIfRequired(CMatchFinder *p)
--{
-- if (p->streamEndWasReached)
-- return;
-- if (p->keepSizeAfter >= p->streamPos - p->pos)
-- MatchFinder_ReadBlock(p);
--}
--
- static void MatchFinder_CheckAndMoveAndRead(CMatchFinder *p)
- {
- if (MatchFinder_NeedMove(p))
-@@ -268,7 +266,7 @@ static void MatchFinder_SetLimits(CMatch
- p->posLimit = p->pos + limit;
- }
-
--void MatchFinder_Init(CMatchFinder *p)
-+static void MatchFinder_Init(CMatchFinder *p)
- {
- UInt32 i;
- for (i = 0; i < p->hashSizeSum; i++)
-@@ -287,7 +285,7 @@ static UInt32 MatchFinder_GetSubValue(CM
- return (p->pos - p->historySize - 1) & kNormalizeMask;
- }
-
--void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems)
-+static void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems)
- {
- UInt32 i;
- for (i = 0; i < numItems; i++)
-@@ -319,38 +317,7 @@ static void MatchFinder_CheckLimits(CMat
- MatchFinder_SetLimits(p);
- }
-
--static UInt32 * Hc_GetMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
-- UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
-- UInt32 *distances, UInt32 maxLen)
--{
-- son[_cyclicBufferPos] = curMatch;
-- for (;;)
-- {
-- UInt32 delta = pos - curMatch;
-- if (cutValue-- == 0 || delta >= _cyclicBufferSize)
-- return distances;
-- {
-- const Byte *pb = cur - delta;
-- curMatch = son[_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)];
-- if (pb[maxLen] == cur[maxLen] && *pb == *cur)
-- {
-- UInt32 len = 0;
-- while (++len != lenLimit)
-- if (pb[len] != cur[len])
-- break;
-- if (maxLen < len)
-- {
-- *distances++ = maxLen = len;
-- *distances++ = delta - 1;
-- if (len == lenLimit)
-- return distances;
-- }
-- }
-- }
-- }
--}
--
--UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
-+static UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
- UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
- UInt32 *distances, UInt32 maxLen)
- {
-@@ -460,10 +427,10 @@ static void SkipMatchesSpec(UInt32 lenLi
- p->buffer++; \
- if (++p->pos == p->posLimit) MatchFinder_CheckLimits(p);
-
--#define MOVE_POS_RET MOVE_POS return offset;
--
- static void MatchFinder_MovePos(CMatchFinder *p) { MOVE_POS; }
-
-+#define MOVE_POS_RET MatchFinder_MovePos(p); return offset;
-+
- #define GET_MATCHES_HEADER2(minLen, ret_op) \
- UInt32 lenLimit; UInt32 hashValue; const Byte *cur; UInt32 curMatch; \
- lenLimit = p->lenLimit; { if (lenLimit < minLen) { MatchFinder_MovePos(p); ret_op; }} \
-@@ -479,62 +446,7 @@ static void MatchFinder_MovePos(CMatchFi
- distances + offset, maxLen) - distances); MOVE_POS_RET;
-
- #define SKIP_FOOTER \
-- SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p)); MOVE_POS;
--
--static UInt32 Bt2_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
--{
-- UInt32 offset;
-- GET_MATCHES_HEADER(2)
-- HASH2_CALC;
-- curMatch = p->hash[hashValue];
-- p->hash[hashValue] = p->pos;
-- offset = 0;
-- GET_MATCHES_FOOTER(offset, 1)
--}
--
--UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
--{
-- UInt32 offset;
-- GET_MATCHES_HEADER(3)
-- HASH_ZIP_CALC;
-- curMatch = p->hash[hashValue];
-- p->hash[hashValue] = p->pos;
-- offset = 0;
-- GET_MATCHES_FOOTER(offset, 2)
--}
--
--static UInt32 Bt3_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
--{
-- UInt32 hash2Value, delta2, maxLen, offset;
-- GET_MATCHES_HEADER(3)
--
-- HASH3_CALC;
--
-- delta2 = p->pos - p->hash[hash2Value];
-- curMatch = p->hash[kFix3HashSize + hashValue];
--
-- p->hash[hash2Value] =
-- p->hash[kFix3HashSize + hashValue] = p->pos;
--
--
-- maxLen = 2;
-- offset = 0;
-- if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
-- {
-- for (; maxLen != lenLimit; maxLen++)
-- if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
-- break;
-- distances[0] = maxLen;
-- distances[1] = delta2 - 1;
-- offset = 2;
-- if (maxLen == lenLimit)
-- {
-- SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p));
-- MOVE_POS_RET;
-- }
-- }
-- GET_MATCHES_FOOTER(offset, maxLen)
--}
-+ SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p)); MatchFinder_MovePos(p);
-
- static UInt32 Bt4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
- {
-@@ -583,108 +495,6 @@ static UInt32 Bt4_MatchFinder_GetMatches
- GET_MATCHES_FOOTER(offset, maxLen)
- }
-
--static UInt32 Hc4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
--{
-- UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset;
-- GET_MATCHES_HEADER(4)
--
-- HASH4_CALC;
--
-- delta2 = p->pos - p->hash[ hash2Value];
-- delta3 = p->pos - p->hash[kFix3HashSize + hash3Value];
-- curMatch = p->hash[kFix4HashSize + hashValue];
--
-- p->hash[ hash2Value] =
-- p->hash[kFix3HashSize + hash3Value] =
-- p->hash[kFix4HashSize + hashValue] = p->pos;
--
-- maxLen = 1;
-- offset = 0;
-- if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
-- {
-- distances[0] = maxLen = 2;
-- distances[1] = delta2 - 1;
-- offset = 2;
-- }
-- if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur)
-- {
-- maxLen = 3;
-- distances[offset + 1] = delta3 - 1;
-- offset += 2;
-- delta2 = delta3;
-- }
-- if (offset != 0)
-- {
-- for (; maxLen != lenLimit; maxLen++)
-- if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
-- break;
-- distances[offset - 2] = maxLen;
-- if (maxLen == lenLimit)
-- {
-- p->son[p->cyclicBufferPos] = curMatch;
-- MOVE_POS_RET;
-- }
-- }
-- if (maxLen < 3)
-- maxLen = 3;
-- offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p),
-- distances + offset, maxLen) - (distances));
-- MOVE_POS_RET
--}
--
--UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
--{
-- UInt32 offset;
-- GET_MATCHES_HEADER(3)
-- HASH_ZIP_CALC;
-- curMatch = p->hash[hashValue];
-- p->hash[hashValue] = p->pos;
-- offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p),
-- distances, 2) - (distances));
-- MOVE_POS_RET
--}
--
--static void Bt2_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
--{
-- do
-- {
-- SKIP_HEADER(2)
-- HASH2_CALC;
-- curMatch = p->hash[hashValue];
-- p->hash[hashValue] = p->pos;
-- SKIP_FOOTER
-- }
-- while (--num != 0);
--}
--
--void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
--{
-- do
-- {
-- SKIP_HEADER(3)
-- HASH_ZIP_CALC;
-- curMatch = p->hash[hashValue];
-- p->hash[hashValue] = p->pos;
-- SKIP_FOOTER
-- }
-- while (--num != 0);
--}
--
--static void Bt3_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
--{
-- do
-- {
-- UInt32 hash2Value;
-- SKIP_HEADER(3)
-- HASH3_CALC;
-- curMatch = p->hash[kFix3HashSize + hashValue];
-- p->hash[hash2Value] =
-- p->hash[kFix3HashSize + hashValue] = p->pos;
-- SKIP_FOOTER
-- }
-- while (--num != 0);
--}
--
- static void Bt4_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
- {
- do
-@@ -701,61 +511,12 @@ static void Bt4_MatchFinder_Skip(CMatchF
- while (--num != 0);
- }
-
--static void Hc4_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
--{
-- do
-- {
-- UInt32 hash2Value, hash3Value;
-- SKIP_HEADER(4)
-- HASH4_CALC;
-- curMatch = p->hash[kFix4HashSize + hashValue];
-- p->hash[ hash2Value] =
-- p->hash[kFix3HashSize + hash3Value] =
-- p->hash[kFix4HashSize + hashValue] = p->pos;
-- p->son[p->cyclicBufferPos] = curMatch;
-- MOVE_POS
-- }
-- while (--num != 0);
--}
--
--void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
--{
-- do
-- {
-- SKIP_HEADER(3)
-- HASH_ZIP_CALC;
-- curMatch = p->hash[hashValue];
-- p->hash[hashValue] = p->pos;
-- p->son[p->cyclicBufferPos] = curMatch;
-- MOVE_POS
-- }
-- while (--num != 0);
--}
--
- void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable)
- {
- vTable->Init = (Mf_Init_Func)MatchFinder_Init;
- vTable->GetIndexByte = (Mf_GetIndexByte_Func)MatchFinder_GetIndexByte;
- vTable->GetNumAvailableBytes = (Mf_GetNumAvailableBytes_Func)MatchFinder_GetNumAvailableBytes;
- vTable->GetPointerToCurrentPos = (Mf_GetPointerToCurrentPos_Func)MatchFinder_GetPointerToCurrentPos;
-- if (!p->btMode)
-- {
-- vTable->GetMatches = (Mf_GetMatches_Func)Hc4_MatchFinder_GetMatches;
-- vTable->Skip = (Mf_Skip_Func)Hc4_MatchFinder_Skip;
-- }
-- else if (p->numHashBytes == 2)
-- {
-- vTable->GetMatches = (Mf_GetMatches_Func)Bt2_MatchFinder_GetMatches;
-- vTable->Skip = (Mf_Skip_Func)Bt2_MatchFinder_Skip;
-- }
-- else if (p->numHashBytes == 3)
-- {
-- vTable->GetMatches = (Mf_GetMatches_Func)Bt3_MatchFinder_GetMatches;
-- vTable->Skip = (Mf_Skip_Func)Bt3_MatchFinder_Skip;
-- }
-- else
-- {
-- vTable->GetMatches = (Mf_GetMatches_Func)Bt4_MatchFinder_GetMatches;
-- vTable->Skip = (Mf_Skip_Func)Bt4_MatchFinder_Skip;
-- }
-+ vTable->GetMatches = (Mf_GetMatches_Func)Bt4_MatchFinder_GetMatches;
-+ vTable->Skip = (Mf_Skip_Func)Bt4_MatchFinder_Skip;
- }
---- a/lib/lzma/LzmaDec.c
-+++ b/lib/lzma/LzmaDec.c
-@@ -682,7 +682,7 @@ static void LzmaDec_InitRc(CLzmaDec *p,
- p->needFlush = 0;
- }
-
--void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState)
-+static void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState)
- {
- p->needFlush = 1;
- p->remainLen = 0;
-@@ -698,7 +698,7 @@ void LzmaDec_InitDicAndState(CLzmaDec *p
- p->needInitState = 1;
- }
-
--void LzmaDec_Init(CLzmaDec *p)
-+static void LzmaDec_Init(CLzmaDec *p)
- {
- p->dicPos = 0;
- LzmaDec_InitDicAndState(p, True, True);
-@@ -716,7 +716,7 @@ static void LzmaDec_InitStateReal(CLzmaD
- p->needInitState = 0;
- }
-
--SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen,
-+static SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen,
- ELzmaFinishMode finishMode, ELzmaStatus *status)
- {
- SizeT inSize = *srcLen;
-@@ -837,65 +837,13 @@ SRes LzmaDec_DecodeToDic(CLzmaDec *p, Si
- return (p->code == 0) ? SZ_OK : SZ_ERROR_DATA;
- }
-
--SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status)
--{
-- SizeT outSize = *destLen;
-- SizeT inSize = *srcLen;
-- *srcLen = *destLen = 0;
-- for (;;)
-- {
-- SizeT inSizeCur = inSize, outSizeCur, dicPos;
-- ELzmaFinishMode curFinishMode;
-- SRes res;
-- if (p->dicPos == p->dicBufSize)
-- p->dicPos = 0;
-- dicPos = p->dicPos;
-- if (outSize > p->dicBufSize - dicPos)
-- {
-- outSizeCur = p->dicBufSize;
-- curFinishMode = LZMA_FINISH_ANY;
-- }
-- else
-- {
-- outSizeCur = dicPos + outSize;
-- curFinishMode = finishMode;
-- }
--
-- res = LzmaDec_DecodeToDic(p, outSizeCur, src, &inSizeCur, curFinishMode, status);
-- src += inSizeCur;
-- inSize -= inSizeCur;
-- *srcLen += inSizeCur;
-- outSizeCur = p->dicPos - dicPos;
-- memcpy(dest, p->dic + dicPos, outSizeCur);
-- dest += outSizeCur;
-- outSize -= outSizeCur;
-- *destLen += outSizeCur;
-- if (res != 0)
-- return res;
-- if (outSizeCur == 0 || outSize == 0)
-- return SZ_OK;
-- }
--}
--
--void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc)
-+static void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc)
- {
- alloc->Free(alloc, p->probs);
- p->probs = 0;
- }
-
--static void LzmaDec_FreeDict(CLzmaDec *p, ISzAlloc *alloc)
--{
-- alloc->Free(alloc, p->dic);
-- p->dic = 0;
--}
--
--void LzmaDec_Free(CLzmaDec *p, ISzAlloc *alloc)
--{
-- LzmaDec_FreeProbs(p, alloc);
-- LzmaDec_FreeDict(p, alloc);
--}
--
--SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size)
-+static SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size)
- {
- UInt32 dicSize;
- Byte d;
-@@ -935,7 +883,7 @@ static SRes LzmaDec_AllocateProbs2(CLzma
- return SZ_OK;
- }
-
--SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
-+static SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
- {
- CLzmaProps propNew;
- RINOK(LzmaProps_Decode(&propNew, props, propsSize));
-@@ -943,28 +891,6 @@ SRes LzmaDec_AllocateProbs(CLzmaDec *p,
- p->prop = propNew;
- return SZ_OK;
- }
--
--SRes LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
--{
-- CLzmaProps propNew;
-- SizeT dicBufSize;
-- RINOK(LzmaProps_Decode(&propNew, props, propsSize));
-- RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc));
-- dicBufSize = propNew.dicSize;
-- if (p->dic == 0 || dicBufSize != p->dicBufSize)
-- {
-- LzmaDec_FreeDict(p, alloc);
-- p->dic = (Byte *)alloc->Alloc(alloc, dicBufSize);
-- if (p->dic == 0)
-- {
-- LzmaDec_FreeProbs(p, alloc);
-- return SZ_ERROR_MEM;
-- }
-- }
-- p->dicBufSize = dicBufSize;
-- p->prop = propNew;
-- return SZ_OK;
--}
-
- SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
- const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
---- a/lib/lzma/LzmaEnc.c
-+++ b/lib/lzma/LzmaEnc.c
-@@ -53,7 +53,7 @@ void LzmaEncProps_Init(CLzmaEncProps *p)
- p->writeEndMark = 0;
- }
-
--void LzmaEncProps_Normalize(CLzmaEncProps *p)
-+static void LzmaEncProps_Normalize(CLzmaEncProps *p)
- {
- int level = p->level;
- if (level < 0) level = 5;
-@@ -76,7 +76,7 @@ void LzmaEncProps_Normalize(CLzmaEncProp
- #endif
- }
-
--UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2)
-+static UInt32 __maybe_unused LzmaEncProps_GetDictSize(const CLzmaEncProps *props2)
- {
- CLzmaEncProps props = *props2;
- LzmaEncProps_Normalize(&props);
-@@ -93,7 +93,7 @@ UInt32 LzmaEncProps_GetDictSize(const CL
-
- #define BSR2_RET(pos, res) { unsigned long i; _BitScanReverse(&i, (pos)); res = (i + i) + ((pos >> (i - 1)) & 1); }
-
--UInt32 GetPosSlot1(UInt32 pos)
-+static UInt32 GetPosSlot1(UInt32 pos)
- {
- UInt32 res;
- BSR2_RET(pos, res);
-@@ -107,7 +107,7 @@ UInt32 GetPosSlot1(UInt32 pos)
- #define kNumLogBits (9 + (int)sizeof(size_t) / 2)
- #define kDicLogSizeMaxCompress ((kNumLogBits - 1) * 2 + 7)
-
--void LzmaEnc_FastPosInit(Byte *g_FastPos)
-+static void LzmaEnc_FastPosInit(Byte *g_FastPos)
- {
- int c = 2, slotFast;
- g_FastPos[0] = 0;
-@@ -339,58 +339,6 @@ typedef struct
- CSaveState saveState;
- } CLzmaEnc;
-
--void LzmaEnc_SaveState(CLzmaEncHandle pp)
--{
-- CLzmaEnc *p = (CLzmaEnc *)pp;
-- CSaveState *dest = &p->saveState;
-- int i;
-- dest->lenEnc = p->lenEnc;
-- dest->repLenEnc = p->repLenEnc;
-- dest->state = p->state;
--
-- for (i = 0; i < kNumStates; i++)
-- {
-- memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i]));
-- memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i]));
-- }
-- for (i = 0; i < kNumLenToPosStates; i++)
-- memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i]));
-- memcpy(dest->isRep, p->isRep, sizeof(p->isRep));
-- memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0));
-- memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1));
-- memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2));
-- memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders));
-- memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder));
-- memcpy(dest->reps, p->reps, sizeof(p->reps));
-- memcpy(dest->litProbs, p->litProbs, (0x300 << p->lclp) * sizeof(CLzmaProb));
--}
--
--void LzmaEnc_RestoreState(CLzmaEncHandle pp)
--{
-- CLzmaEnc *dest = (CLzmaEnc *)pp;
-- const CSaveState *p = &dest->saveState;
-- int i;
-- dest->lenEnc = p->lenEnc;
-- dest->repLenEnc = p->repLenEnc;
-- dest->state = p->state;
--
-- for (i = 0; i < kNumStates; i++)
-- {
-- memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i]));
-- memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i]));
-- }
-- for (i = 0; i < kNumLenToPosStates; i++)
-- memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i]));
-- memcpy(dest->isRep, p->isRep, sizeof(p->isRep));
-- memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0));
-- memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1));
-- memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2));
-- memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders));
-- memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder));
-- memcpy(dest->reps, p->reps, sizeof(p->reps));
-- memcpy(dest->litProbs, p->litProbs, (0x300 << dest->lclp) * sizeof(CLzmaProb));
--}
--
- SRes LzmaEnc_SetProps(CLzmaEncHandle pp, const CLzmaEncProps *props2)
- {
- CLzmaEnc *p = (CLzmaEnc *)pp;
-@@ -600,7 +548,7 @@ static void LitEnc_EncodeMatched(CRangeE
- while (symbol < 0x10000);
- }
-
--void LzmaEnc_InitPriceTables(UInt32 *ProbPrices)
-+static void LzmaEnc_InitPriceTables(UInt32 *ProbPrices)
- {
- UInt32 i;
- for (i = (1 << kNumMoveReducingBits) / 2; i < kBitModelTotal; i += (1 << kNumMoveReducingBits))
-@@ -1676,7 +1624,7 @@ static void FillDistancesPrices(CLzmaEnc
- p->matchPriceCount = 0;
- }
-
--void LzmaEnc_Construct(CLzmaEnc *p)
-+static void LzmaEnc_Construct(CLzmaEnc *p)
- {
- RangeEnc_Construct(&p->rc);
- MatchFinder_Construct(&p->matchFinderBase);
-@@ -1709,7 +1657,7 @@ CLzmaEncHandle LzmaEnc_Create(ISzAlloc *
- return p;
- }
-
--void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAlloc *alloc)
-+static void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAlloc *alloc)
- {
- alloc->Free(alloc, p->litProbs);
- alloc->Free(alloc, p->saveState.litProbs);
-@@ -1717,7 +1665,7 @@ void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAl
- p->saveState.litProbs = 0;
- }
-
--void LzmaEnc_Destruct(CLzmaEnc *p, ISzAlloc *alloc, ISzAlloc *allocBig)
-+static void LzmaEnc_Destruct(CLzmaEnc *p, ISzAlloc *alloc, ISzAlloc *allocBig)
- {
- #ifndef _7ZIP_ST
- MatchFinderMt_Destruct(&p->matchFinderMt, allocBig);
-@@ -1947,7 +1895,7 @@ static SRes LzmaEnc_Alloc(CLzmaEnc *p, U
- return SZ_OK;
- }
-
--void LzmaEnc_Init(CLzmaEnc *p)
-+static void LzmaEnc_Init(CLzmaEnc *p)
- {
- UInt32 i;
- p->state = 0;
-@@ -2005,7 +1953,7 @@ void LzmaEnc_Init(CLzmaEnc *p)
- p->lpMask = (1 << p->lp) - 1;
- }
-
--void LzmaEnc_InitPrices(CLzmaEnc *p)
-+static void LzmaEnc_InitPrices(CLzmaEnc *p)
- {
- if (!p->fastMode)
- {
-@@ -2037,26 +1985,6 @@ static SRes LzmaEnc_AllocAndInit(CLzmaEn
- return SZ_OK;
- }
-
--static SRes LzmaEnc_Prepare(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream,
-- ISzAlloc *alloc, ISzAlloc *allocBig)
--{
-- CLzmaEnc *p = (CLzmaEnc *)pp;
-- p->matchFinderBase.stream = inStream;
-- p->needInit = 1;
-- p->rc.outStream = outStream;
-- return LzmaEnc_AllocAndInit(p, 0, alloc, allocBig);
--}
--
--SRes LzmaEnc_PrepareForLzma2(CLzmaEncHandle pp,
-- ISeqInStream *inStream, UInt32 keepWindowSize,
-- ISzAlloc *alloc, ISzAlloc *allocBig)
--{
-- CLzmaEnc *p = (CLzmaEnc *)pp;
-- p->matchFinderBase.stream = inStream;
-- p->needInit = 1;
-- return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig);
--}
--
- static void LzmaEnc_SetInputBuf(CLzmaEnc *p, const Byte *src, SizeT srcLen)
- {
- p->matchFinderBase.directInput = 1;
-@@ -2064,7 +1992,7 @@ static void LzmaEnc_SetInputBuf(CLzmaEnc
- p->matchFinderBase.directInputRem = srcLen;
- }
-
--SRes LzmaEnc_MemPrepare(CLzmaEncHandle pp, const Byte *src, SizeT srcLen,
-+static SRes LzmaEnc_MemPrepare(CLzmaEncHandle pp, const Byte *src, SizeT srcLen,
- UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
- {
- CLzmaEnc *p = (CLzmaEnc *)pp;
-@@ -2074,7 +2002,7 @@ SRes LzmaEnc_MemPrepare(CLzmaEncHandle p
- return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig);
- }
-
--void LzmaEnc_Finish(CLzmaEncHandle pp)
-+static void LzmaEnc_Finish(CLzmaEncHandle pp)
- {
- #ifndef _7ZIP_ST
- CLzmaEnc *p = (CLzmaEnc *)pp;
-@@ -2107,53 +2035,6 @@ static size_t MyWrite(void *pp, const vo
- return size;
- }
-
--
--UInt32 LzmaEnc_GetNumAvailableBytes(CLzmaEncHandle pp)
--{
-- const CLzmaEnc *p = (CLzmaEnc *)pp;
-- return p->matchFinder.GetNumAvailableBytes(p->matchFinderObj);
--}
--
--const Byte *LzmaEnc_GetCurBuf(CLzmaEncHandle pp)
--{
-- const CLzmaEnc *p = (CLzmaEnc *)pp;
-- return p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset;
--}
--
--SRes LzmaEnc_CodeOneMemBlock(CLzmaEncHandle pp, Bool reInit,
-- Byte *dest, size_t *destLen, UInt32 desiredPackSize, UInt32 *unpackSize)
--{
-- CLzmaEnc *p = (CLzmaEnc *)pp;
-- UInt64 nowPos64;
-- SRes res;
-- CSeqOutStreamBuf outStream;
--
-- outStream.funcTable.Write = MyWrite;
-- outStream.data = dest;
-- outStream.rem = *destLen;
-- outStream.overflow = False;
--
-- p->writeEndMark = False;
-- p->finished = False;
-- p->result = SZ_OK;
--
-- if (reInit)
-- LzmaEnc_Init(p);
-- LzmaEnc_InitPrices(p);
-- nowPos64 = p->nowPos64;
-- RangeEnc_Init(&p->rc);
-- p->rc.outStream = &outStream.funcTable;
--
-- res = LzmaEnc_CodeOneBlock(p, True, desiredPackSize, *unpackSize);
--
-- *unpackSize = (UInt32)(p->nowPos64 - nowPos64);
-- *destLen -= outStream.rem;
-- if (outStream.overflow)
-- return SZ_ERROR_OUTPUT_EOF;
--
-- return res;
--}
--
- static SRes LzmaEnc_Encode2(CLzmaEnc *p, ICompressProgress *progress)
- {
- SRes res = SZ_OK;
-@@ -2184,13 +2065,6 @@ static SRes LzmaEnc_Encode2(CLzmaEnc *p,
- return res;
- }
-
--SRes LzmaEnc_Encode(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream, ICompressProgress *progress,
-- ISzAlloc *alloc, ISzAlloc *allocBig)
--{
-- RINOK(LzmaEnc_Prepare(pp, outStream, inStream, alloc, allocBig));
-- return LzmaEnc_Encode2((CLzmaEnc *)pp, progress);
--}
--
- SRes LzmaEnc_WriteProperties(CLzmaEncHandle pp, Byte *props, SizeT *size)
- {
- CLzmaEnc *p = (CLzmaEnc *)pp;
-@@ -2247,25 +2121,3 @@ SRes LzmaEnc_MemEncode(CLzmaEncHandle pp
- return SZ_ERROR_OUTPUT_EOF;
- return res;
- }
--
--SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
-- const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
-- ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig)
--{
-- CLzmaEnc *p = (CLzmaEnc *)LzmaEnc_Create(alloc);
-- SRes res;
-- if (p == 0)
-- return SZ_ERROR_MEM;
--
-- res = LzmaEnc_SetProps(p, props);
-- if (res == SZ_OK)
-- {
-- res = LzmaEnc_WriteProperties(p, propsEncoded, propsSize);
-- if (res == SZ_OK)
-- res = LzmaEnc_MemEncode(p, dest, destLen, src, srcLen,
-- writeEndMark, progress, alloc, allocBig);
-- }
--
-- LzmaEnc_Destroy(p, alloc, allocBig);
-- return res;
--}
+++ /dev/null
-From 2e864386e62e702a343be2507062ee08d5dfc810 Mon Sep 17 00:00:00 2001
-From: Evan Green <evgreen@chromium.org>
-Date: Thu, 14 Nov 2019 15:50:07 -0800
-Subject: loop: Report EOPNOTSUPP properly
-
-Properly plumb out EOPNOTSUPP from loop driver operations, which may
-get returned when for instance a discard operation is attempted but not
-supported by the underlying block device. Before this change, everything
-was reported in the log as an I/O error, which is scary and not
-helpful in debugging.
-
-Signed-off-by: Evan Green <evgreen@chromium.org>
-Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
-Reviewed-by: Bart Van Assche <bvanassche@acm.org>
----
- drivers/block/loop.c | 7 +++++--
- 1 file changed, 5 insertions(+), 2 deletions(-)
-
---- a/drivers/block/loop.c
-+++ b/drivers/block/loop.c
-@@ -461,7 +461,7 @@ static void lo_complete_rq(struct reques
- if (!cmd->use_aio || cmd->ret < 0 || cmd->ret == blk_rq_bytes(rq) ||
- req_op(rq) != REQ_OP_READ) {
- if (cmd->ret < 0)
-- ret = BLK_STS_IOERR;
-+ ret = errno_to_blk_status(cmd->ret);
- goto end_io;
- }
-
-@@ -1924,7 +1924,10 @@ static void loop_handle_cmd(struct loop_
- failed:
- /* complete non-aio request */
- if (!cmd->use_aio || ret) {
-- cmd->ret = ret ? -EIO : 0;
-+ if (ret == -EOPNOTSUPP)
-+ cmd->ret = ret;
-+ else
-+ cmd->ret = ret ? -EIO : 0;
- blk_mq_complete_request(rq);
- }
- }
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:18:54 +0200
-Subject: bridge: only accept EAP locally
-
-When bridging, do not forward EAP frames to other ports, only deliver
-them locally, regardless of the state.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-[add disable_eap_hack sysfs attribute]
-Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
----
-
---- a/net/bridge/br_input.c
-+++ b/net/bridge/br_input.c
-@@ -108,10 +108,14 @@ int br_handle_frame_finish(struct net *n
- }
- }
-
-+ BR_INPUT_SKB_CB(skb)->brdev = br->dev;
-+
-+ if (skb->protocol == htons(ETH_P_PAE) && !br->disable_eap_hack)
-+ return br_pass_frame_up(skb);
-+
- if (p->state == BR_STATE_LEARNING)
- goto drop;
-
-- BR_INPUT_SKB_CB(skb)->brdev = br->dev;
- BR_INPUT_SKB_CB(skb)->src_port_isolated = !!(p->flags & BR_ISOLATED);
-
- if (IS_ENABLED(CONFIG_INET) &&
---- a/net/bridge/br_private.h
-+++ b/net/bridge/br_private.h
-@@ -337,6 +337,8 @@ struct net_bridge {
- u16 group_fwd_mask;
- u16 group_fwd_mask_required;
-
-+ bool disable_eap_hack;
-+
- /* STP */
- bridge_id designated_root;
- bridge_id bridge_id;
---- a/net/bridge/br_sysfs_br.c
-+++ b/net/bridge/br_sysfs_br.c
-@@ -170,6 +170,30 @@ static ssize_t group_fwd_mask_store(stru
- }
- static DEVICE_ATTR_RW(group_fwd_mask);
-
-+static ssize_t disable_eap_hack_show(struct device *d,
-+ struct device_attribute *attr,
-+ char *buf)
-+{
-+ struct net_bridge *br = to_bridge(d);
-+ return sprintf(buf, "%u\n", br->disable_eap_hack);
-+}
-+
-+static int set_disable_eap_hack(struct net_bridge *br, unsigned long val)
-+{
-+ br->disable_eap_hack = !!val;
-+
-+ return 0;
-+}
-+
-+static ssize_t disable_eap_hack_store(struct device *d,
-+ struct device_attribute *attr,
-+ const char *buf,
-+ size_t len)
-+{
-+ return store_bridge_parm(d, buf, len, set_disable_eap_hack);
-+}
-+static DEVICE_ATTR_RW(disable_eap_hack);
-+
- static ssize_t priority_show(struct device *d, struct device_attribute *attr,
- char *buf)
- {
-@@ -810,6 +834,7 @@ static struct attribute *bridge_attrs[]
- &dev_attr_ageing_time.attr,
- &dev_attr_stp_state.attr,
- &dev_attr_group_fwd_mask.attr,
-+ &dev_attr_disable_eap_hack.attr,
- &dev_attr_priority.attr,
- &dev_attr_bridge_id.attr,
- &dev_attr_root_id.attr,
+++ /dev/null
-From a00590d570212c3c633bd463cef8ec7377cc7993 Mon Sep 17 00:00:00 2001
-From: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
-Date: Tue, 30 Jun 2020 12:07:44 +0100
-Subject: [PATCH] sch_cake: fix IP protocol handling in the presence of VLAN
- tags
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-From: Ilya Ponetayev <i.ponetaev@ndmsystems.com>
-
-CAKE was using the return value of tc_skb_protocol() and expecting it to be
-the IP protocol type. This can fail in the presence of QinQ VLAN tags,
-making CAKE unable to handle ECN marking and diffserv parsing in this case.
-Fix this by implementing our own version of tc_skb_protocol(), which will
-use skb->protocol directly, but also parse and skip over any VLAN tags and
-return the inner protocol number instead.
-
-Also fix CE marking by implementing a version of INET_ECN_set_ce() that
-uses the same parsing routine.
-
-Fixes: ea82511518f4 ("sch_cake: Add NAT awareness to packet classifier")
-Fixes: b2100cc56fca ("sch_cake: Use tc_skb_protocol() helper for getting packet protocol")
-Fixes: 046f6fd5daef ("sched: Add Common Applications Kept Enhanced (cake) qdisc")
-Signed-off-by: Ilya Ponetayev <i.ponetaev@ndmsystems.com>
-[ squash original two patches, rewrite commit message ]
-Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
-Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
----
- net/sched/sch_cake.c | 52 +++++++++++++++++++++++++++++++++++++++++---
- 1 file changed, 49 insertions(+), 3 deletions(-)
-
---- a/net/sched/sch_cake.c
-+++ b/net/sched/sch_cake.c
-@@ -497,6 +497,52 @@ static bool cobalt_queue_empty(struct co
- return down;
- }
-
-+static __be16 cake_skb_proto(const struct sk_buff *skb)
-+{
-+ unsigned int offset = skb_mac_offset(skb) + sizeof(struct ethhdr);
-+ __be16 proto = skb->protocol;
-+ struct vlan_hdr vhdr, *vh;
-+
-+ while (proto == htons(ETH_P_8021Q) || proto == htons(ETH_P_8021AD)) {
-+ vh = skb_header_pointer(skb, offset, sizeof(vhdr), &vhdr);
-+ if (!vh)
-+ break;
-+
-+ proto = vh->h_vlan_encapsulated_proto;
-+ offset += sizeof(vhdr);
-+ }
-+
-+ return proto;
-+}
-+
-+static int cake_set_ce(struct sk_buff *skb)
-+{
-+ int wlen = skb_network_offset(skb);
-+
-+ switch (cake_skb_proto(skb)) {
-+ case htons(ETH_P_IP):
-+ wlen += sizeof(struct iphdr);
-+ if (!pskb_may_pull(skb, wlen) ||
-+ skb_try_make_writable(skb, wlen))
-+ return 0;
-+
-+ return IP_ECN_set_ce(ip_hdr(skb));
-+
-+ case htons(ETH_P_IPV6):
-+ wlen += sizeof(struct ipv6hdr);
-+ if (!pskb_may_pull(skb, wlen) ||
-+ skb_try_make_writable(skb, wlen))
-+ return 0;
-+
-+ return IP6_ECN_set_ce(skb, ipv6_hdr(skb));
-+
-+ default:
-+ return 0;
-+ }
-+
-+ return 0;
-+}
-+
- /* Call this with a freshly dequeued packet for possible congestion marking.
- * Returns true as an instruction to drop the packet, false for delivery.
- */
-@@ -549,7 +595,7 @@ static bool cobalt_should_drop(struct co
-
- if (next_due && vars->dropping) {
- /* Use ECN mark if possible, otherwise drop */
-- drop = !(vars->ecn_marked = INET_ECN_set_ce(skb));
-+ drop = !(vars->ecn_marked = cake_set_ce(skb));
-
- vars->count++;
- if (!vars->count)
-@@ -592,7 +638,7 @@ static bool cake_update_flowkeys(struct
- bool rev = !skb->_nfct, upd = false;
- __be32 ip;
-
-- if (skb_protocol(skb, true) != htons(ETH_P_IP))
-+ if (cake_skb_proto(skb) != htons(ETH_P_IP))
- return false;
-
- if (!nf_ct_get_tuple_skb(&tuple, skb))
-@@ -1557,7 +1603,7 @@ static u8 cake_handle_diffserv(struct sk
- u16 *buf, buf_;
- u8 dscp;
-
-- switch (skb_protocol(skb, true)) {
-+ switch (cake_skb_proto(skb)) {
- case htons(ETH_P_IP):
- buf = skb_header_pointer(skb, offset, sizeof(buf_), &buf_);
- if (unlikely(!buf))
+++ /dev/null
-From eda40b8c8c82e0f2789d6bc8bf63846dce2e8f32 Mon Sep 17 00:00:00 2001
-From: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
-Date: Sat, 23 Mar 2019 09:29:49 +0000
-Subject: [PATCH] netfilter: connmark: introduce set-dscpmark
-
-set-dscpmark is a method of storing the DSCP of an ip packet into
-conntrack mark. In combination with a suitable tc filter action
-(act_ctinfo) DSCP values are able to be stored in the mark on egress and
-restored on ingress across links that otherwise alter or bleach DSCP.
-
-This is useful for qdiscs such as CAKE which are able to shape according
-to policies based on DSCP.
-
-Ingress classification is traditionally a challenging task since
-iptables rules haven't yet run and tc filter/eBPF programs are pre-NAT
-lookups, hence are unable to see internal IPv4 addresses as used on the
-typical home masquerading gateway.
-
-x_tables CONNMARK set-dscpmark target solves the problem of storing the
-DSCP to the conntrack mark in a way suitable for the new act_ctinfo tc
-action to restore.
-
-The set-dscpmark option accepts 2 parameters, a 32bit 'dscpmask' and a
-32bit 'statemask'. The dscp mask must be 6 contiguous bits and
-represents the area where the DSCP will be stored in the connmark. The
-state mask is a minimum 1 bit length mask that must not overlap with the
-dscpmask. It represents a flag which is set when the DSCP has been
-stored in the conntrack mark. This is useful to implement a 'one shot'
-iptables based classification where the 'complicated' iptables rules are
-only run once to classify the connection on initial (egress) packet and
-subsequent packets are all marked/restored with the same DSCP. A state
-mask of zero disables the setting of a status bit/s.
-
-example syntax with a suitably modified iptables user space application:
-
-iptables -A QOS_MARK_eth0 -t mangle -j CONNMARK --set-dscpmark 0xfc000000/0x01000000
-
-Would store the DSCP in the top 6 bits of the 32bit mark field, and use
-the LSB of the top byte as the 'DSCP has been stored' marker.
-
-|----0xFC----conntrack mark----000000---|
-| Bits 31-26 | bit 25 | bit24 |~~~ Bit 0|
-| DSCP | unused | flag |unused |
-|-----------------------0x01---000000---|
- ^ ^
- | |
- ---| Conditional flag
- | set this when dscp
-|-ip diffserv-| stored in mark
-| 6 bits |
-|-------------|
-
-an identically configured tc action to restore looks like:
-
-tc filter show dev eth0 ingress
-filter parent ffff: protocol all pref 10 u32 chain 0
-filter parent ffff: protocol all pref 10 u32 chain 0 fh 800: ht divisor 1
-filter parent ffff: protocol all pref 10 u32 chain 0 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1: not_in_hw
- match 00000000/00000000 at 0
- action order 1: ctinfo zone 0 pipe
- index 2 ref 1 bind 1 dscp 0xfc000000/0x1000000
-
- action order 2: mirred (Egress Redirect to device ifb4eth0) stolen
- index 1 ref 1 bind 1
-
-|----0xFC----conntrack mark----000000---|
-| Bits 31-26 | bit 25 | bit24 |~~~ Bit 0|
-| DSCP | unused | flag |unused |
-|-----------------------0x01---000000---|
- | |
- | |
- ---| Conditional flag
- v only restore if set
-|-ip diffserv-|
-| 6 bits |
-|-------------|
-
-Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
----
- include/uapi/linux/netfilter/xt_connmark.h | 10 ++++
- net/netfilter/xt_connmark.c | 55 ++++++++++++++++++----
- 2 files changed, 57 insertions(+), 8 deletions(-)
-
---- a/include/uapi/linux/netfilter/xt_connmark.h
-+++ b/include/uapi/linux/netfilter/xt_connmark.h
-@@ -20,6 +20,11 @@ enum {
- };
-
- enum {
-+ XT_CONNMARK_VALUE = (1 << 0),
-+ XT_CONNMARK_DSCP = (1 << 1)
-+};
-+
-+enum {
- D_SHIFT_LEFT = 0,
- D_SHIFT_RIGHT,
- };
-@@ -34,6 +39,11 @@ struct xt_connmark_tginfo2 {
- __u8 shift_dir, shift_bits, mode;
- };
-
-+struct xt_connmark_tginfo3 {
-+ __u32 ctmark, ctmask, nfmask;
-+ __u8 shift_dir, shift_bits, mode, func;
-+};
-+
- struct xt_connmark_mtinfo1 {
- __u32 mark, mask;
- __u8 invert;
---- a/net/netfilter/xt_connmark.c
-+++ b/net/netfilter/xt_connmark.c
-@@ -36,12 +36,13 @@ MODULE_ALIAS("ipt_connmark");
- MODULE_ALIAS("ip6t_connmark");
-
- static unsigned int
--connmark_tg_shift(struct sk_buff *skb, const struct xt_connmark_tginfo2 *info)
-+connmark_tg_shift(struct sk_buff *skb, const struct xt_connmark_tginfo3 *info)
- {
- enum ip_conntrack_info ctinfo;
- u_int32_t new_targetmark;
- struct nf_conn *ct;
- u_int32_t newmark;
-+ u_int8_t dscp;
-
- ct = nf_ct_get(skb, &ctinfo);
- if (ct == NULL)
-@@ -49,12 +50,24 @@ connmark_tg_shift(struct sk_buff *skb, c
-
- switch (info->mode) {
- case XT_CONNMARK_SET:
-- newmark = (ct->mark & ~info->ctmask) ^ info->ctmark;
-- if (info->shift_dir == D_SHIFT_RIGHT)
-- newmark >>= info->shift_bits;
-- else
-- newmark <<= info->shift_bits;
-+ newmark = ct->mark;
-+ if (info->func & XT_CONNMARK_VALUE) {
-+ newmark = (newmark & ~info->ctmask) ^ info->ctmark;
-+ if (info->shift_dir == D_SHIFT_RIGHT)
-+ newmark >>= info->shift_bits;
-+ else
-+ newmark <<= info->shift_bits;
-+ } else if (info->func & XT_CONNMARK_DSCP) {
-+ if (skb->protocol == htons(ETH_P_IP))
-+ dscp = ipv4_get_dsfield(ip_hdr(skb)) >> 2;
-+ else if (skb->protocol == htons(ETH_P_IPV6))
-+ dscp = ipv6_get_dsfield(ipv6_hdr(skb)) >> 2;
-+ else /* protocol doesn't have diffserv */
-+ break;
-
-+ newmark = (newmark & ~info->ctmark) |
-+ (info->ctmask | (dscp << info->shift_bits));
-+ }
- if (ct->mark != newmark) {
- ct->mark = newmark;
- nf_conntrack_event_cache(IPCT_MARK, ct);
-@@ -93,20 +106,36 @@ static unsigned int
- connmark_tg(struct sk_buff *skb, const struct xt_action_param *par)
- {
- const struct xt_connmark_tginfo1 *info = par->targinfo;
-- const struct xt_connmark_tginfo2 info2 = {
-+ const struct xt_connmark_tginfo3 info3 = {
- .ctmark = info->ctmark,
- .ctmask = info->ctmask,
- .nfmask = info->nfmask,
- .mode = info->mode,
-+ .func = XT_CONNMARK_VALUE
- };
-
-- return connmark_tg_shift(skb, &info2);
-+ return connmark_tg_shift(skb, &info3);
- }
-
- static unsigned int
- connmark_tg_v2(struct sk_buff *skb, const struct xt_action_param *par)
- {
- const struct xt_connmark_tginfo2 *info = par->targinfo;
-+ const struct xt_connmark_tginfo3 info3 = {
-+ .ctmark = info->ctmark,
-+ .ctmask = info->ctmask,
-+ .nfmask = info->nfmask,
-+ .mode = info->mode,
-+ .func = XT_CONNMARK_VALUE
-+ };
-+
-+ return connmark_tg_shift(skb, &info3);
-+}
-+
-+static unsigned int
-+connmark_tg_v3(struct sk_buff *skb, const struct xt_action_param *par)
-+{
-+ const struct xt_connmark_tginfo3 *info = par->targinfo;
-
- return connmark_tg_shift(skb, info);
- }
-@@ -177,6 +206,16 @@ static struct xt_target connmark_tg_reg[
- .targetsize = sizeof(struct xt_connmark_tginfo2),
- .destroy = connmark_tg_destroy,
- .me = THIS_MODULE,
-+ },
-+ {
-+ .name = "CONNMARK",
-+ .revision = 3,
-+ .family = NFPROTO_UNSPEC,
-+ .checkentry = connmark_tg_check,
-+ .target = connmark_tg_v3,
-+ .targetsize = sizeof(struct xt_connmark_tginfo3),
-+ .destroy = connmark_tg_destroy,
-+ .me = THIS_MODULE,
- }
- };
-
+++ /dev/null
---- a/include/net/netfilter/nf_flow_table.h
-+++ b/include/net/netfilter/nf_flow_table.h
-@@ -163,6 +163,8 @@ struct nf_flow_table_hw {
- int nf_flow_table_hw_register(const struct nf_flow_table_hw *offload);
- void nf_flow_table_hw_unregister(const struct nf_flow_table_hw *offload);
-
-+void nf_flow_table_acct(struct flow_offload *flow, struct sk_buff *skb, int dir);
-+
- extern struct work_struct nf_flow_offload_hw_work;
-
- #define MODULE_ALIAS_NF_FLOWTABLE(family) \
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -11,6 +11,7 @@
- #include <net/netfilter/nf_conntrack.h>
- #include <net/netfilter/nf_conntrack_core.h>
- #include <net/netfilter/nf_conntrack_tuple.h>
-+#include <net/netfilter/nf_conntrack_acct.h>
-
- struct flow_offload_entry {
- struct flow_offload flow;
-@@ -149,6 +150,22 @@ void flow_offload_free(struct flow_offlo
- }
- EXPORT_SYMBOL_GPL(flow_offload_free);
-
-+void nf_flow_table_acct(struct flow_offload *flow, struct sk_buff *skb, int dir)
-+{
-+ struct flow_offload_entry *entry;
-+ struct nf_conn_acct *acct;
-+
-+ entry = container_of(flow, struct flow_offload_entry, flow);
-+ acct = nf_conn_acct_find(entry->ct);
-+ if (acct) {
-+ struct nf_conn_counter *counter = acct->counter;
-+
-+ atomic64_inc(&counter[dir].packets);
-+ atomic64_add(skb->len, &counter[dir].bytes);
-+ }
-+}
-+EXPORT_SYMBOL_GPL(nf_flow_table_acct);
-+
- static u32 flow_offload_hash(const void *data, u32 len, u32 seed)
- {
- const struct flow_offload_tuple *tuple = data;
---- a/net/netfilter/nf_flow_table_ip.c
-+++ b/net/netfilter/nf_flow_table_ip.c
-@@ -11,6 +11,7 @@
- #include <net/ip6_route.h>
- #include <net/neighbour.h>
- #include <net/netfilter/nf_flow_table.h>
-+
- /* For layer 4 checksum field offset. */
- #include <linux/tcp.h>
- #include <linux/udp.h>
-@@ -268,6 +269,7 @@ nf_flow_offload_ip_hook(void *priv, stru
- skb->dev = outdev;
- nexthop = rt_nexthop(rt, flow->tuplehash[!dir].tuple.src_v4.s_addr);
- skb_dst_set_noref(skb, &rt->dst);
-+ nf_flow_table_acct(flow, skb, dir);
- neigh_xmit(NEIGH_ARP_TABLE, outdev, &nexthop, skb);
-
- return NF_STOLEN;
-@@ -489,6 +491,7 @@ nf_flow_offload_ipv6_hook(void *priv, st
- skb->dev = outdev;
- nexthop = rt6_nexthop(rt, &flow->tuplehash[!dir].tuple.src_v6);
- skb_dst_set_noref(skb, &rt->dst);
-+ nf_flow_table_acct(flow, skb, dir);
- neigh_xmit(NEIGH_ND_TABLE, outdev, nexthop, skb);
-
- return NF_STOLEN;
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Tue, 20 Feb 2018 15:56:02 +0100
-Subject: [PATCH] netfilter: add xt_OFFLOAD target
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- create mode 100644 net/netfilter/xt_OFFLOAD.c
-
---- a/net/ipv4/netfilter/Kconfig
-+++ b/net/ipv4/netfilter/Kconfig
-@@ -63,8 +63,6 @@ config NF_TABLES_ARP
- help
- This option enables the ARP support for nf_tables.
-
--endif # NF_TABLES
--
- config NF_FLOW_TABLE_IPV4
- tristate "Netfilter flow table IPv4 module"
- depends on NF_FLOW_TABLE
-@@ -73,6 +71,8 @@ config NF_FLOW_TABLE_IPV4
-
- To compile it as a module, choose M here.
-
-+endif # NF_TABLES
-+
- config NF_DUP_IPV4
- tristate "Netfilter IPv4 packet duplication to alternate destination"
- depends on !NF_CONNTRACK || NF_CONNTRACK
---- a/net/ipv6/netfilter/Kconfig
-+++ b/net/ipv6/netfilter/Kconfig
-@@ -80,7 +80,6 @@ config NFT_FIB_IPV6
- multicast or blackhole.
-
- endif # NF_TABLES_IPV6
--endif # NF_TABLES
-
- config NF_FLOW_TABLE_IPV6
- tristate "Netfilter flow table IPv6 module"
-@@ -90,6 +89,8 @@ config NF_FLOW_TABLE_IPV6
-
- To compile it as a module, choose M here.
-
-+endif # NF_TABLES
-+
- config NF_DUP_IPV6
- tristate "Netfilter IPv6 packet duplication to alternate destination"
- depends on !NF_CONNTRACK || NF_CONNTRACK
---- a/net/netfilter/Kconfig
-+++ b/net/netfilter/Kconfig
-@@ -693,8 +693,6 @@ config NFT_FIB_NETDEV
-
- endif # NF_TABLES_NETDEV
-
--endif # NF_TABLES
--
- config NF_FLOW_TABLE_INET
- tristate "Netfilter flow table mixed IPv4/IPv6 module"
- depends on NF_FLOW_TABLE
-@@ -703,11 +701,12 @@ config NF_FLOW_TABLE_INET
-
- To compile it as a module, choose M here.
-
-+endif # NF_TABLES
-+
- config NF_FLOW_TABLE
- tristate "Netfilter flow table module"
- depends on NETFILTER_INGRESS
- depends on NF_CONNTRACK
-- depends on NF_TABLES
- help
- This option adds the flow table core infrastructure.
-
-@@ -996,6 +995,15 @@ config NETFILTER_XT_TARGET_NOTRACK
- depends on NETFILTER_ADVANCED
- select NETFILTER_XT_TARGET_CT
-
-+config NETFILTER_XT_TARGET_FLOWOFFLOAD
-+ tristate '"FLOWOFFLOAD" target support'
-+ depends on NF_FLOW_TABLE
-+ depends on NETFILTER_INGRESS
-+ help
-+ This option adds a `FLOWOFFLOAD' target, which uses the nf_flow_offload
-+ module to speed up processing of packets by bypassing the usual
-+ netfilter chains
-+
- config NETFILTER_XT_TARGET_RATEEST
- tristate '"RATEEST" target support'
- depends on NETFILTER_ADVANCED
---- a/net/netfilter/Makefile
-+++ b/net/netfilter/Makefile
-@@ -144,6 +144,7 @@ obj-$(CONFIG_NETFILTER_XT_TARGET_CLASSIF
- obj-$(CONFIG_NETFILTER_XT_TARGET_CONNSECMARK) += xt_CONNSECMARK.o
- obj-$(CONFIG_NETFILTER_XT_TARGET_CT) += xt_CT.o
- obj-$(CONFIG_NETFILTER_XT_TARGET_DSCP) += xt_DSCP.o
-+obj-$(CONFIG_NETFILTER_XT_TARGET_FLOWOFFLOAD) += xt_FLOWOFFLOAD.o
- obj-$(CONFIG_NETFILTER_XT_TARGET_HL) += xt_HL.o
- obj-$(CONFIG_NETFILTER_XT_TARGET_HMARK) += xt_HMARK.o
- obj-$(CONFIG_NETFILTER_XT_TARGET_LED) += xt_LED.o
---- /dev/null
-+++ b/net/netfilter/xt_FLOWOFFLOAD.c
-@@ -0,0 +1,422 @@
-+/*
-+ * Copyright (C) 2018 Felix Fietkau <nbd@nbd.name>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/netfilter.h>
-+#include <linux/netfilter/xt_FLOWOFFLOAD.h>
-+#include <net/ip.h>
-+#include <net/netfilter/nf_conntrack.h>
-+#include <net/netfilter/nf_conntrack_extend.h>
-+#include <net/netfilter/nf_conntrack_helper.h>
-+#include <net/netfilter/nf_flow_table.h>
-+
-+static struct nf_flowtable nf_flowtable;
-+static HLIST_HEAD(hooks);
-+static DEFINE_SPINLOCK(hooks_lock);
-+static struct delayed_work hook_work;
-+
-+struct xt_flowoffload_hook {
-+ struct hlist_node list;
-+ struct nf_hook_ops ops;
-+ struct net *net;
-+ bool registered;
-+ bool used;
-+};
-+
-+static unsigned int
-+xt_flowoffload_net_hook(void *priv, struct sk_buff *skb,
-+ const struct nf_hook_state *state)
-+{
-+ switch (skb->protocol) {
-+ case htons(ETH_P_IP):
-+ return nf_flow_offload_ip_hook(priv, skb, state);
-+ case htons(ETH_P_IPV6):
-+ return nf_flow_offload_ipv6_hook(priv, skb, state);
-+ }
-+
-+ return NF_ACCEPT;
-+}
-+
-+static int
-+xt_flowoffload_create_hook(struct net_device *dev)
-+{
-+ struct xt_flowoffload_hook *hook;
-+ struct nf_hook_ops *ops;
-+
-+ hook = kzalloc(sizeof(*hook), GFP_ATOMIC);
-+ if (!hook)
-+ return -ENOMEM;
-+
-+ ops = &hook->ops;
-+ ops->pf = NFPROTO_NETDEV;
-+ ops->hooknum = NF_NETDEV_INGRESS;
-+ ops->priority = 10;
-+ ops->priv = &nf_flowtable;
-+ ops->hook = xt_flowoffload_net_hook;
-+ ops->dev = dev;
-+
-+ hlist_add_head(&hook->list, &hooks);
-+ mod_delayed_work(system_power_efficient_wq, &hook_work, 0);
-+
-+ return 0;
-+}
-+
-+static struct xt_flowoffload_hook *
-+flow_offload_lookup_hook(struct net_device *dev)
-+{
-+ struct xt_flowoffload_hook *hook;
-+
-+ hlist_for_each_entry(hook, &hooks, list) {
-+ if (hook->ops.dev == dev)
-+ return hook;
-+ }
-+
-+ return NULL;
-+}
-+
-+static void
-+xt_flowoffload_check_device(struct net_device *dev)
-+{
-+ struct xt_flowoffload_hook *hook;
-+
-+ spin_lock_bh(&hooks_lock);
-+ hook = flow_offload_lookup_hook(dev);
-+ if (hook)
-+ hook->used = true;
-+ else
-+ xt_flowoffload_create_hook(dev);
-+ spin_unlock_bh(&hooks_lock);
-+}
-+
-+static void
-+xt_flowoffload_register_hooks(void)
-+{
-+ struct xt_flowoffload_hook *hook;
-+
-+restart:
-+ hlist_for_each_entry(hook, &hooks, list) {
-+ if (hook->registered)
-+ continue;
-+
-+ hook->registered = true;
-+ hook->net = dev_net(hook->ops.dev);
-+ spin_unlock_bh(&hooks_lock);
-+ nf_register_net_hook(hook->net, &hook->ops);
-+ spin_lock_bh(&hooks_lock);
-+ goto restart;
-+ }
-+
-+}
-+
-+static void
-+xt_flowoffload_cleanup_hooks(void)
-+{
-+ struct xt_flowoffload_hook *hook;
-+
-+restart:
-+ hlist_for_each_entry(hook, &hooks, list) {
-+ if (hook->used || !hook->registered)
-+ continue;
-+
-+ hlist_del(&hook->list);
-+ spin_unlock_bh(&hooks_lock);
-+ nf_unregister_net_hook(hook->net, &hook->ops);
-+ kfree(hook);
-+ spin_lock_bh(&hooks_lock);
-+ goto restart;
-+ }
-+
-+}
-+
-+static void
-+xt_flowoffload_check_hook(struct flow_offload *flow, void *data)
-+{
-+ struct flow_offload_tuple *tuple = &flow->tuplehash[0].tuple;
-+ struct xt_flowoffload_hook *hook;
-+ bool *found = data;
-+
-+ spin_lock_bh(&hooks_lock);
-+ hlist_for_each_entry(hook, &hooks, list) {
-+ if (hook->ops.dev->ifindex != tuple->iifidx &&
-+ hook->ops.dev->ifindex != tuple->oifidx)
-+ continue;
-+
-+ hook->used = true;
-+ *found = true;
-+ }
-+ spin_unlock_bh(&hooks_lock);
-+}
-+
-+static void
-+xt_flowoffload_hook_work(struct work_struct *work)
-+{
-+ struct xt_flowoffload_hook *hook;
-+ bool found = false;
-+ int err;
-+
-+ spin_lock_bh(&hooks_lock);
-+ xt_flowoffload_register_hooks();
-+ hlist_for_each_entry(hook, &hooks, list)
-+ hook->used = false;
-+ spin_unlock_bh(&hooks_lock);
-+
-+ err = nf_flow_table_iterate(&nf_flowtable, xt_flowoffload_check_hook,
-+ &found);
-+ if (err && err != -EAGAIN)
-+ goto out;
-+
-+ spin_lock_bh(&hooks_lock);
-+ xt_flowoffload_cleanup_hooks();
-+ spin_unlock_bh(&hooks_lock);
-+
-+out:
-+ if (found)
-+ queue_delayed_work(system_power_efficient_wq, &hook_work, HZ);
-+}
-+
-+static bool
-+xt_flowoffload_skip(struct sk_buff *skb, int family)
-+{
-+ if (skb_sec_path(skb))
-+ return true;
-+
-+ if (family == NFPROTO_IPV4) {
-+ const struct ip_options *opt = &(IPCB(skb)->opt);
-+
-+ if (unlikely(opt->optlen))
-+ return true;
-+ }
-+
-+ return false;
-+}
-+
-+static struct dst_entry *
-+xt_flowoffload_dst(const struct nf_conn *ct, enum ip_conntrack_dir dir,
-+ const struct xt_action_param *par, int ifindex)
-+{
-+ struct dst_entry *dst = NULL;
-+ struct flowi fl;
-+
-+ memset(&fl, 0, sizeof(fl));
-+ switch (xt_family(par)) {
-+ case NFPROTO_IPV4:
-+ fl.u.ip4.daddr = ct->tuplehash[dir].tuple.src.u3.ip;
-+ fl.u.ip4.flowi4_oif = ifindex;
-+ break;
-+ case NFPROTO_IPV6:
-+ fl.u.ip6.saddr = ct->tuplehash[dir].tuple.dst.u3.in6;
-+ fl.u.ip6.daddr = ct->tuplehash[dir].tuple.src.u3.in6;
-+ fl.u.ip6.flowi6_oif = ifindex;
-+ break;
-+ }
-+
-+ nf_route(xt_net(par), &dst, &fl, false, xt_family(par));
-+
-+ return dst;
-+}
-+
-+static int
-+xt_flowoffload_route(struct sk_buff *skb, const struct nf_conn *ct,
-+ const struct xt_action_param *par,
-+ struct nf_flow_route *route, enum ip_conntrack_dir dir)
-+{
-+ struct dst_entry *this_dst, *other_dst;
-+
-+ this_dst = xt_flowoffload_dst(ct, !dir, par, xt_out(par)->ifindex);
-+ other_dst = xt_flowoffload_dst(ct, dir, par, xt_in(par)->ifindex);
-+
-+ route->tuple[dir].dst = this_dst;
-+ route->tuple[!dir].dst = other_dst;
-+
-+ if (!this_dst || !other_dst)
-+ return -ENOENT;
-+
-+ if (dst_xfrm(this_dst) || dst_xfrm(other_dst))
-+ return -EINVAL;
-+
-+ return 0;
-+}
-+
-+static unsigned int
-+flowoffload_tg(struct sk_buff *skb, const struct xt_action_param *par)
-+{
-+ const struct xt_flowoffload_target_info *info = par->targinfo;
-+ struct tcphdr _tcph, *tcph = NULL;
-+ enum ip_conntrack_info ctinfo;
-+ enum ip_conntrack_dir dir;
-+ struct nf_flow_route route;
-+ struct flow_offload *flow = NULL;
-+ struct nf_conn *ct;
-+ struct net *net;
-+
-+ if (xt_flowoffload_skip(skb, xt_family(par)))
-+ return XT_CONTINUE;
-+
-+ ct = nf_ct_get(skb, &ctinfo);
-+ if (ct == NULL)
-+ return XT_CONTINUE;
-+
-+ switch (ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.protonum) {
-+ case IPPROTO_TCP:
-+ if (ct->proto.tcp.state != TCP_CONNTRACK_ESTABLISHED)
-+ return XT_CONTINUE;
-+
-+ tcph = skb_header_pointer(skb, par->thoff,
-+ sizeof(_tcph), &_tcph);
-+ if (unlikely(!tcph || tcph->fin || tcph->rst))
-+ return XT_CONTINUE;
-+ break;
-+ case IPPROTO_UDP:
-+ break;
-+ default:
-+ return XT_CONTINUE;
-+ }
-+
-+ if (nf_ct_ext_exist(ct, NF_CT_EXT_HELPER) ||
-+ ct->status & IPS_SEQ_ADJUST)
-+ return XT_CONTINUE;
-+
-+ if (!nf_ct_is_confirmed(ct))
-+ return XT_CONTINUE;
-+
-+ if (!xt_in(par) || !xt_out(par))
-+ return XT_CONTINUE;
-+
-+ if (test_and_set_bit(IPS_OFFLOAD_BIT, &ct->status))
-+ return XT_CONTINUE;
-+
-+ dir = CTINFO2DIR(ctinfo);
-+
-+ if (xt_flowoffload_route(skb, ct, par, &route, dir) == 0)
-+ flow = flow_offload_alloc(ct, &route);
-+
-+ dst_release(route.tuple[dir].dst);
-+ dst_release(route.tuple[!dir].dst);
-+
-+ if (!flow)
-+ goto err_flow_route;
-+
-+ if (tcph) {
-+ ct->proto.tcp.seen[0].flags |= IP_CT_TCP_FLAG_BE_LIBERAL;
-+ ct->proto.tcp.seen[1].flags |= IP_CT_TCP_FLAG_BE_LIBERAL;
-+ }
-+
-+ if (flow_offload_add(&nf_flowtable, flow) < 0)
-+ goto err_flow_add;
-+
-+ xt_flowoffload_check_device(xt_in(par));
-+ xt_flowoffload_check_device(xt_out(par));
-+
-+ net = read_pnet(&nf_flowtable.ft_net);
-+ if (!net)
-+ write_pnet(&nf_flowtable.ft_net, xt_net(par));
-+
-+ if (info->flags & XT_FLOWOFFLOAD_HW)
-+ nf_flow_offload_hw_add(xt_net(par), flow, ct);
-+
-+ return XT_CONTINUE;
-+
-+err_flow_add:
-+ flow_offload_free(flow);
-+err_flow_route:
-+ clear_bit(IPS_OFFLOAD_BIT, &ct->status);
-+ return XT_CONTINUE;
-+}
-+
-+
-+static int flowoffload_chk(const struct xt_tgchk_param *par)
-+{
-+ struct xt_flowoffload_target_info *info = par->targinfo;
-+
-+ if (info->flags & ~XT_FLOWOFFLOAD_MASK)
-+ return -EINVAL;
-+
-+ return 0;
-+}
-+
-+static struct xt_target offload_tg_reg __read_mostly = {
-+ .family = NFPROTO_UNSPEC,
-+ .name = "FLOWOFFLOAD",
-+ .revision = 0,
-+ .targetsize = sizeof(struct xt_flowoffload_target_info),
-+ .usersize = sizeof(struct xt_flowoffload_target_info),
-+ .checkentry = flowoffload_chk,
-+ .target = flowoffload_tg,
-+ .me = THIS_MODULE,
-+};
-+
-+static int xt_flowoffload_table_init(struct nf_flowtable *table)
-+{
-+ table->flags = NF_FLOWTABLE_F_HW;
-+ nf_flow_table_init(table);
-+ return 0;
-+}
-+
-+static void xt_flowoffload_table_cleanup(struct nf_flowtable *table)
-+{
-+ nf_flow_table_free(table);
-+}
-+
-+static int flow_offload_netdev_event(struct notifier_block *this,
-+ unsigned long event, void *ptr)
-+{
-+ struct xt_flowoffload_hook *hook = NULL;
-+ struct net_device *dev = netdev_notifier_info_to_dev(ptr);
-+
-+ if (event != NETDEV_UNREGISTER)
-+ return NOTIFY_DONE;
-+
-+ spin_lock_bh(&hooks_lock);
-+ hook = flow_offload_lookup_hook(dev);
-+ if (hook) {
-+ hlist_del(&hook->list);
-+ }
-+ spin_unlock_bh(&hooks_lock);
-+ if (hook) {
-+ nf_unregister_net_hook(hook->net, &hook->ops);
-+ kfree(hook);
-+ }
-+
-+ nf_flow_table_cleanup(dev_net(dev), dev);
-+
-+ return NOTIFY_DONE;
-+}
-+
-+static struct notifier_block flow_offload_netdev_notifier = {
-+ .notifier_call = flow_offload_netdev_event,
-+};
-+
-+static int __init xt_flowoffload_tg_init(void)
-+{
-+ int ret;
-+
-+ register_netdevice_notifier(&flow_offload_netdev_notifier);
-+
-+ INIT_DELAYED_WORK(&hook_work, xt_flowoffload_hook_work);
-+
-+ ret = xt_flowoffload_table_init(&nf_flowtable);
-+ if (ret)
-+ return ret;
-+
-+ ret = xt_register_target(&offload_tg_reg);
-+ if (ret)
-+ xt_flowoffload_table_cleanup(&nf_flowtable);
-+
-+ return ret;
-+}
-+
-+static void __exit xt_flowoffload_tg_exit(void)
-+{
-+ xt_unregister_target(&offload_tg_reg);
-+ xt_flowoffload_table_cleanup(&nf_flowtable);
-+ unregister_netdevice_notifier(&flow_offload_netdev_notifier);
-+}
-+
-+MODULE_LICENSE("GPL");
-+module_init(xt_flowoffload_tg_init);
-+module_exit(xt_flowoffload_tg_exit);
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -6,7 +6,6 @@
- #include <linux/netdevice.h>
- #include <net/ip.h>
- #include <net/ip6_route.h>
--#include <net/netfilter/nf_tables.h>
- #include <net/netfilter/nf_flow_table.h>
- #include <net/netfilter/nf_conntrack.h>
- #include <net/netfilter/nf_conntrack_core.h>
---- /dev/null
-+++ b/include/uapi/linux/netfilter/xt_FLOWOFFLOAD.h
-@@ -0,0 +1,17 @@
-+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-+#ifndef _XT_FLOWOFFLOAD_H
-+#define _XT_FLOWOFFLOAD_H
-+
-+#include <linux/types.h>
-+
-+enum {
-+ XT_FLOWOFFLOAD_HW = 1 << 0,
-+
-+ XT_FLOWOFFLOAD_MASK = XT_FLOWOFFLOAD_HW
-+};
-+
-+struct xt_flowoffload_target_info {
-+ __u32 flags;
-+};
-+
-+#endif /* _XT_FLOWOFFLOAD_H */
+++ /dev/null
-From 6d3bc769657b0ee7c7506dad9911111c4226a7ea Mon Sep 17 00:00:00 2001
-From: Imre Kaloz <kaloz@openwrt.org>
-Date: Fri, 7 Jul 2017 17:21:05 +0200
-Subject: mac80211: increase wireless mesh header size
-
-lede-commit 3d4466cfd8f75f717efdb1f96fdde3c70d865fc1
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
----
- include/linux/netdevice.h | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -140,8 +140,8 @@ static inline bool dev_xmit_complete(int
-
- #if defined(CONFIG_HYPERV_NET)
- # define LL_MAX_HEADER 128
--#elif defined(CONFIG_WLAN) || IS_ENABLED(CONFIG_AX25)
--# if defined(CONFIG_MAC80211_MESH)
-+#elif defined(CONFIG_WLAN) || IS_ENABLED(CONFIG_AX25) || 1
-+# if defined(CONFIG_MAC80211_MESH) || 1
- # define LL_MAX_HEADER 128
- # else
- # define LL_MAX_HEADER 96
+++ /dev/null
-From a6ccb238939b25851474a279b20367fd24a0e816 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:21:53 +0200
-Subject: hack: net: fq_codel: tune defaults for small devices
-
-Assume that x86_64 devices always have a big memory and do not need this
-optimization compared to devices with only 32 MB or 64 MB RAM.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/sched/sch_fq_codel.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/net/sched/sch_fq_codel.c
-+++ b/net/sched/sch_fq_codel.c
-@@ -474,7 +474,11 @@ static int fq_codel_init(struct Qdisc *s
-
- sch->limit = 10*1024;
- q->flows_cnt = 1024;
-+#ifdef CONFIG_X86_64
- q->memory_limit = 32 << 20; /* 32 MBytes */
-+#else
-+ q->memory_limit = 4 << 20; /* 4 MBytes */
-+#endif
- q->drop_batch_size = 64;
- q->quantum = psched_mtu(qdisc_dev(sch));
- INIT_LIST_HEAD(&q->new_flows);
+++ /dev/null
-From 1d418f7e88035ed7a94073f6354246c66e9193e9 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:22:58 +0200
-Subject: fq_codel: switch default qdisc from pfifo_fast to fq_codel and remove pfifo_fast
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/net/sch_generic.h | 3 ++-
- net/sched/Kconfig | 3 ++-
- net/sched/sch_api.c | 2 +-
- net/sched/sch_fq_codel.c | 3 ++-
- net/sched/sch_generic.c | 4 ++--
- 5 files changed, 9 insertions(+), 6 deletions(-)
-
---- a/include/net/sch_generic.h
-+++ b/include/net/sch_generic.h
-@@ -487,12 +487,13 @@ extern struct Qdisc_ops noop_qdisc_ops;
- extern struct Qdisc_ops pfifo_fast_ops;
- extern struct Qdisc_ops mq_qdisc_ops;
- extern struct Qdisc_ops noqueue_qdisc_ops;
-+extern struct Qdisc_ops fq_codel_qdisc_ops;
- extern const struct Qdisc_ops *default_qdisc_ops;
- static inline const struct Qdisc_ops *
- get_default_qdisc_ops(const struct net_device *dev, int ntx)
- {
- return ntx < dev->real_num_tx_queues ?
-- default_qdisc_ops : &pfifo_fast_ops;
-+ default_qdisc_ops : &fq_codel_qdisc_ops;
- }
-
- struct Qdisc_class_common {
---- a/net/sched/Kconfig
-+++ b/net/sched/Kconfig
-@@ -3,8 +3,9 @@
- #
-
- menuconfig NET_SCHED
-- bool "QoS and/or fair queueing"
-+ def_bool y
- select NET_SCH_FIFO
-+ select NET_SCH_FQ_CODEL
- ---help---
- When the kernel has several packets to send out over a network
- device, it has to decide which ones to send first, which ones to
---- a/net/sched/sch_api.c
-+++ b/net/sched/sch_api.c
-@@ -2162,7 +2162,7 @@ static int __init pktsched_init(void)
- return err;
- }
-
-- register_qdisc(&pfifo_fast_ops);
-+ register_qdisc(&fq_codel_qdisc_ops);
- register_qdisc(&pfifo_qdisc_ops);
- register_qdisc(&bfifo_qdisc_ops);
- register_qdisc(&pfifo_head_drop_qdisc_ops);
---- a/net/sched/sch_fq_codel.c
-+++ b/net/sched/sch_fq_codel.c
-@@ -714,7 +714,7 @@ static const struct Qdisc_class_ops fq_c
- .walk = fq_codel_walk,
- };
-
--static struct Qdisc_ops fq_codel_qdisc_ops __read_mostly = {
-+struct Qdisc_ops fq_codel_qdisc_ops __read_mostly = {
- .cl_ops = &fq_codel_class_ops,
- .id = "fq_codel",
- .priv_size = sizeof(struct fq_codel_sched_data),
-@@ -729,6 +729,7 @@ static struct Qdisc_ops fq_codel_qdisc_o
- .dump_stats = fq_codel_dump_stats,
- .owner = THIS_MODULE,
- };
-+EXPORT_SYMBOL(fq_codel_qdisc_ops);
-
- static int __init fq_codel_module_init(void)
- {
---- a/net/sched/sch_generic.c
-+++ b/net/sched/sch_generic.c
-@@ -35,7 +35,7 @@
- #include <net/xfrm.h>
-
- /* Qdisc to use by default */
--const struct Qdisc_ops *default_qdisc_ops = &pfifo_fast_ops;
-+const struct Qdisc_ops *default_qdisc_ops = &fq_codel_qdisc_ops;
- EXPORT_SYMBOL(default_qdisc_ops);
-
- /* Main transmission queue. */
-@@ -1026,7 +1026,7 @@ static void attach_one_default_qdisc(str
- void *_unused)
- {
- struct Qdisc *qdisc;
-- const struct Qdisc_ops *ops = default_qdisc_ops;
-+ const struct Qdisc_ops *ops = &fq_codel_qdisc_ops;
-
- if (dev->priv_flags & IFF_NO_QUEUE)
- ops = &noqueue_qdisc_ops;
+++ /dev/null
-From b531d492d5ef1cf9dba0f4888eb5fd8624a6d762 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:23:42 +0200
-Subject: net: sched: switch default qdisc from pfifo_fast to fq_codel and remove pfifo_fast
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/sched/sch_generic.c | 140 ------------------------------------------------
- 1 file changed, 140 deletions(-)
-
---- a/net/sched/sch_generic.c
-+++ b/net/sched/sch_generic.c
-@@ -613,207 +613,6 @@ struct Qdisc_ops noqueue_qdisc_ops __rea
- .owner = THIS_MODULE,
- };
-
--static const u8 prio2band[TC_PRIO_MAX + 1] = {
-- 1, 2, 2, 2, 1, 2, 0, 0 , 1, 1, 1, 1, 1, 1, 1, 1
--};
--
--/* 3-band FIFO queue: old style, but should be a bit faster than
-- generic prio+fifo combination.
-- */
--
--#define PFIFO_FAST_BANDS 3
--
--/*
-- * Private data for a pfifo_fast scheduler containing:
-- * - rings for priority bands
-- */
--struct pfifo_fast_priv {
-- struct skb_array q[PFIFO_FAST_BANDS];
--};
--
--static inline struct skb_array *band2list(struct pfifo_fast_priv *priv,
-- int band)
--{
-- return &priv->q[band];
--}
--
--static int pfifo_fast_enqueue(struct sk_buff *skb, struct Qdisc *qdisc,
-- struct sk_buff **to_free)
--{
-- int band = prio2band[skb->priority & TC_PRIO_MAX];
-- struct pfifo_fast_priv *priv = qdisc_priv(qdisc);
-- struct skb_array *q = band2list(priv, band);
-- unsigned int pkt_len = qdisc_pkt_len(skb);
-- int err;
--
-- err = skb_array_produce(q, skb);
--
-- if (unlikely(err))
-- return qdisc_drop_cpu(skb, qdisc, to_free);
--
-- qdisc_qstats_atomic_qlen_inc(qdisc);
-- /* Note: skb can not be used after skb_array_produce(),
-- * so we better not use qdisc_qstats_cpu_backlog_inc()
-- */
-- this_cpu_add(qdisc->cpu_qstats->backlog, pkt_len);
-- return NET_XMIT_SUCCESS;
--}
--
--static struct sk_buff *pfifo_fast_dequeue(struct Qdisc *qdisc)
--{
-- struct pfifo_fast_priv *priv = qdisc_priv(qdisc);
-- struct sk_buff *skb = NULL;
-- int band;
--
-- for (band = 0; band < PFIFO_FAST_BANDS && !skb; band++) {
-- struct skb_array *q = band2list(priv, band);
--
-- if (__skb_array_empty(q))
-- continue;
--
-- skb = __skb_array_consume(q);
-- }
-- if (likely(skb)) {
-- qdisc_qstats_cpu_backlog_dec(qdisc, skb);
-- qdisc_bstats_cpu_update(qdisc, skb);
-- qdisc_qstats_atomic_qlen_dec(qdisc);
-- }
--
-- return skb;
--}
--
--static struct sk_buff *pfifo_fast_peek(struct Qdisc *qdisc)
--{
-- struct pfifo_fast_priv *priv = qdisc_priv(qdisc);
-- struct sk_buff *skb = NULL;
-- int band;
--
-- for (band = 0; band < PFIFO_FAST_BANDS && !skb; band++) {
-- struct skb_array *q = band2list(priv, band);
--
-- skb = __skb_array_peek(q);
-- }
--
-- return skb;
--}
--
--static void pfifo_fast_reset(struct Qdisc *qdisc)
--{
-- int i, band;
-- struct pfifo_fast_priv *priv = qdisc_priv(qdisc);
--
-- for (band = 0; band < PFIFO_FAST_BANDS; band++) {
-- struct skb_array *q = band2list(priv, band);
-- struct sk_buff *skb;
--
-- /* NULL ring is possible if destroy path is due to a failed
-- * skb_array_init() in pfifo_fast_init() case.
-- */
-- if (!q->ring.queue)
-- continue;
--
-- while ((skb = __skb_array_consume(q)) != NULL)
-- kfree_skb(skb);
-- }
--
-- for_each_possible_cpu(i) {
-- struct gnet_stats_queue *q = per_cpu_ptr(qdisc->cpu_qstats, i);
--
-- q->backlog = 0;
-- }
--}
--
--static int pfifo_fast_dump(struct Qdisc *qdisc, struct sk_buff *skb)
--{
-- struct tc_prio_qopt opt = { .bands = PFIFO_FAST_BANDS };
--
-- memcpy(&opt.priomap, prio2band, TC_PRIO_MAX + 1);
-- if (nla_put(skb, TCA_OPTIONS, sizeof(opt), &opt))
-- goto nla_put_failure;
-- return skb->len;
--
--nla_put_failure:
-- return -1;
--}
--
--static int pfifo_fast_init(struct Qdisc *qdisc, struct nlattr *opt,
-- struct netlink_ext_ack *extack)
--{
-- unsigned int qlen = qdisc_dev(qdisc)->tx_queue_len;
-- struct pfifo_fast_priv *priv = qdisc_priv(qdisc);
-- int prio;
--
-- /* guard against zero length rings */
-- if (!qlen)
-- return -EINVAL;
--
-- for (prio = 0; prio < PFIFO_FAST_BANDS; prio++) {
-- struct skb_array *q = band2list(priv, prio);
-- int err;
--
-- err = skb_array_init(q, qlen, GFP_KERNEL);
-- if (err)
-- return -ENOMEM;
-- }
--
-- /* Can by-pass the queue discipline */
-- qdisc->flags |= TCQ_F_CAN_BYPASS;
-- return 0;
--}
--
--static void pfifo_fast_destroy(struct Qdisc *sch)
--{
-- struct pfifo_fast_priv *priv = qdisc_priv(sch);
-- int prio;
--
-- for (prio = 0; prio < PFIFO_FAST_BANDS; prio++) {
-- struct skb_array *q = band2list(priv, prio);
--
-- /* NULL ring is possible if destroy path is due to a failed
-- * skb_array_init() in pfifo_fast_init() case.
-- */
-- if (!q->ring.queue)
-- continue;
-- /* Destroy ring but no need to kfree_skb because a call to
-- * pfifo_fast_reset() has already done that work.
-- */
-- ptr_ring_cleanup(&q->ring, NULL);
-- }
--}
--
--static int pfifo_fast_change_tx_queue_len(struct Qdisc *sch,
-- unsigned int new_len)
--{
-- struct pfifo_fast_priv *priv = qdisc_priv(sch);
-- struct skb_array *bands[PFIFO_FAST_BANDS];
-- int prio;
--
-- for (prio = 0; prio < PFIFO_FAST_BANDS; prio++) {
-- struct skb_array *q = band2list(priv, prio);
--
-- bands[prio] = q;
-- }
--
-- return skb_array_resize_multiple(bands, PFIFO_FAST_BANDS, new_len,
-- GFP_KERNEL);
--}
--
--struct Qdisc_ops pfifo_fast_ops __read_mostly = {
-- .id = "pfifo_fast",
-- .priv_size = sizeof(struct pfifo_fast_priv),
-- .enqueue = pfifo_fast_enqueue,
-- .dequeue = pfifo_fast_dequeue,
-- .peek = pfifo_fast_peek,
-- .init = pfifo_fast_init,
-- .destroy = pfifo_fast_destroy,
-- .reset = pfifo_fast_reset,
-- .dump = pfifo_fast_dump,
-- .change_tx_queue_len = pfifo_fast_change_tx_queue_len,
-- .owner = THIS_MODULE,
-- .static_flags = TCQ_F_NOLOCK | TCQ_F_CPUSTATS,
--};
--EXPORT_SYMBOL(pfifo_fast_ops);
--
- static struct lock_class_key qdisc_tx_busylock;
- static struct lock_class_key qdisc_running_key;
-
+++ /dev/null
-From 36e516290611e613aa92996cb4339561452695b4 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:24:23 +0200
-Subject: net: swconfig: adds openwrt switch layer
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/net/phy/Kconfig | 83 +++++++++++++++++++++++++++++++++++++++++++++++
- drivers/net/phy/Makefile | 15 +++++++++
- include/uapi/linux/Kbuild | 1 +
- 3 files changed, 99 insertions(+)
-
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -209,6 +209,89 @@ config LED_TRIGGER_PHY
- for any speed known to the PHY.
-
-
-+comment "Switch configuration API + drivers"
-+
-+config SWCONFIG
-+ tristate "Switch configuration API"
-+ ---help---
-+ Switch configuration API using netlink. This allows
-+ you to configure the VLAN features of certain switches.
-+
-+config SWCONFIG_LEDS
-+ bool "Switch LED trigger support"
-+ depends on (SWCONFIG && LEDS_TRIGGERS)
-+
-+config ADM6996_PHY
-+ tristate "Driver for ADM6996 switches"
-+ select SWCONFIG
-+ ---help---
-+ Currently supports the ADM6996FC and ADM6996M switches.
-+ Support for FC is very limited.
-+
-+config AR8216_PHY
-+ tristate "Driver for Atheros AR8216 switches"
-+ select ETHERNET_PACKET_MANGLE
-+ select SWCONFIG
-+
-+config AR8216_PHY_LEDS
-+ bool "Atheros AR8216 switch LED support"
-+ depends on (AR8216_PHY && LEDS_CLASS)
-+
-+source "drivers/net/phy/b53/Kconfig"
-+
-+config IP17XX_PHY
-+ tristate "Driver for IC+ IP17xx switches"
-+ select SWCONFIG
-+
-+config MVSWITCH_PHY
-+ tristate "Driver for Marvell 88E6060 switches"
-+ select ETHERNET_PACKET_MANGLE
-+
-+config MVSW61XX_PHY
-+ tristate "Driver for Marvell 88E6171/6172 switches"
-+ select SWCONFIG
-+
-+config PSB6970_PHY
-+ tristate "Lantiq XWAY Tantos (PSB6970) Ethernet switch"
-+ select SWCONFIG
-+ select ETHERNET_PACKET_MANGLE
-+
-+config RTL8306_PHY
-+ tristate "Driver for Realtek RTL8306S switches"
-+ select SWCONFIG
-+
-+config RTL8366_SMI
-+ tristate "Driver for the RTL8366 SMI interface"
-+ depends on GPIOLIB
-+ ---help---
-+ This module implements the SMI interface protocol which is used
-+ by some RTL8366 ethernet switch devices via the generic GPIO API.
-+
-+if RTL8366_SMI
-+
-+config RTL8366_SMI_DEBUG_FS
-+ bool "RTL8366 SMI interface debugfs support"
-+ depends on DEBUG_FS
-+ default n
-+
-+config RTL8366S_PHY
-+ tristate "Driver for the Realtek RTL8366S switch"
-+ select SWCONFIG
-+
-+config RTL8366RB_PHY
-+ tristate "Driver for the Realtek RTL8366RB switch"
-+ select SWCONFIG
-+
-+config RTL8367_PHY
-+ tristate "Driver for the Realtek RTL8367R/M switches"
-+ select SWCONFIG
-+
-+config RTL8367B_PHY
-+ tristate "Driver fot the Realtek RTL8367R-VB switch"
-+ select SWCONFIG
-+
-+endif # RTL8366_SMI
-+
- comment "MII PHY device drivers"
-
- config SFP
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -22,6 +22,21 @@ libphy-$(CONFIG_LED_TRIGGER_PHY) += phy_
- obj-$(CONFIG_PHYLINK) += phylink.o
- obj-$(CONFIG_PHYLIB) += libphy.o
-
-+obj-$(CONFIG_SWCONFIG) += swconfig.o
-+obj-$(CONFIG_ADM6996_PHY) += adm6996.o
-+obj-$(CONFIG_AR8216_PHY) += ar8216.o ar8327.o
-+obj-$(CONFIG_SWCONFIG_B53) += b53/
-+obj-$(CONFIG_IP17XX_PHY) += ip17xx.o
-+obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o
-+obj-$(CONFIG_MVSW61XX_PHY) += mvsw61xx.o
-+obj-$(CONFIG_PSB6970_PHY) += psb6970.o
-+obj-$(CONFIG_RTL8306_PHY) += rtl8306.o
-+obj-$(CONFIG_RTL8366_SMI) += rtl8366_smi.o
-+obj-$(CONFIG_RTL8366S_PHY) += rtl8366s.o
-+obj-$(CONFIG_RTL8366RB_PHY) += rtl8366rb.o
-+obj-$(CONFIG_RTL8367_PHY) += rtl8367.o
-+obj-$(CONFIG_RTL8367B_PHY) += rtl8367b.o
-+
- obj-$(CONFIG_MDIO_BCM_IPROC) += mdio-bcm-iproc.o
- obj-$(CONFIG_MDIO_BCM_UNIMAC) += mdio-bcm-unimac.o
- obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
---- a/include/linux/platform_data/b53.h
-+++ b/include/linux/platform_data/b53.h
-@@ -29,6 +29,9 @@ struct b53_platform_data {
- u32 chip_id;
- u16 enabled_ports;
-
-+ /* allow to specify an ethX alias */
-+ const char *alias;
-+
- /* only used by MMAP'd driver */
- unsigned big_endian:1;
- void __iomem *regs;
+++ /dev/null
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -557,6 +557,12 @@ struct phy_driver {
- /* Determines the negotiated speed and duplex */
- int (*read_status)(struct phy_device *phydev);
-
-+ /*
-+ * Update the value in phydev->link to reflect the
-+ * current link value
-+ */
-+ int (*update_link)(struct phy_device *phydev);
-+
- /* Clears any pending interrupts */
- int (*ack_interrupt)(struct phy_device *phydev);
-
---- a/drivers/net/phy/phy_device.c
-+++ b/drivers/net/phy/phy_device.c
-@@ -1583,6 +1583,9 @@ int genphy_update_link(struct phy_device
- {
- int status;
-
-+ if (phydev->drv && phydev->drv->update_link)
-+ return phydev->drv->update_link(phydev);
-+
- /* The link state is latched low so that momentary link
- * drops can be detected. Do not double-read the status
- * in polling mode to detect such short link drops.
+++ /dev/null
-From ffe387740bbe88dd88bbe04d6375902708003d6e Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 7 Jul 2017 17:25:00 +0200
-Subject: net: add packet mangeling patch
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/netdevice.h | 11 +++++++++++
- include/linux/skbuff.h | 14 ++++----------
- net/Kconfig | 6 ++++++
- net/core/dev.c | 18 ++++++++++++++----
- net/core/skbuff.c | 17 +++++++++++++++++
- net/ethernet/eth.c | 6 ++++++
- 6 files changed, 58 insertions(+), 14 deletions(-)
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -1517,6 +1517,7 @@ enum netdev_priv_flags {
- IFF_FAILOVER_SLAVE = 1<<28,
- IFF_L3MDEV_RX_HANDLER = 1<<29,
- IFF_LIVE_RENAME_OK = 1<<30,
-+ IFF_NO_IP_ALIGN = 1<<31,
- };
-
- #define IFF_802_1Q_VLAN IFF_802_1Q_VLAN
-@@ -1549,6 +1550,7 @@ enum netdev_priv_flags {
- #define IFF_FAILOVER_SLAVE IFF_FAILOVER_SLAVE
- #define IFF_L3MDEV_RX_HANDLER IFF_L3MDEV_RX_HANDLER
- #define IFF_LIVE_RENAME_OK IFF_LIVE_RENAME_OK
-+#define IFF_NO_IP_ALIGN IFF_NO_IP_ALIGN
-
- /**
- * struct net_device - The DEVICE structure.
-@@ -1849,6 +1851,11 @@ struct net_device {
- const struct tlsdev_ops *tlsdev_ops;
- #endif
-
-+#ifdef CONFIG_ETHERNET_PACKET_MANGLE
-+ void (*eth_mangle_rx)(struct net_device *dev, struct sk_buff *skb);
-+ struct sk_buff *(*eth_mangle_tx)(struct net_device *dev, struct sk_buff *skb);
-+#endif
-+
- const struct header_ops *header_ops;
-
- unsigned int flags;
-@@ -1931,6 +1938,10 @@ struct net_device {
- struct mpls_dev __rcu *mpls_ptr;
- #endif
-
-+#ifdef CONFIG_ETHERNET_PACKET_MANGLE
-+ void *phy_ptr; /* PHY device specific data */
-+#endif
-+
- /*
- * Cache lines mostly used on receive path (including eth_type_trans())
- */
---- a/include/linux/skbuff.h
-+++ b/include/linux/skbuff.h
-@@ -2547,6 +2547,10 @@ static inline int pskb_trim(struct sk_bu
- return (len < skb->len) ? __pskb_trim(skb, len) : 0;
- }
-
-+extern struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev,
-+ unsigned int length, gfp_t gfp);
-+
-+
- /**
- * pskb_trim_unique - remove end from a paged unique (not cloned) buffer
- * @skb: buffer to alter
-@@ -2678,16 +2682,6 @@ static inline struct sk_buff *dev_alloc_
- }
-
-
--static inline struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev,
-- unsigned int length, gfp_t gfp)
--{
-- struct sk_buff *skb = __netdev_alloc_skb(dev, length + NET_IP_ALIGN, gfp);
--
-- if (NET_IP_ALIGN && skb)
-- skb_reserve(skb, NET_IP_ALIGN);
-- return skb;
--}
--
- static inline struct sk_buff *netdev_alloc_skb_ip_align(struct net_device *dev,
- unsigned int length)
- {
---- a/net/Kconfig
-+++ b/net/Kconfig
-@@ -25,6 +25,12 @@ menuconfig NET
-
- if NET
-
-+config ETHERNET_PACKET_MANGLE
-+ bool
-+ help
-+ This option can be selected by phy drivers that need to mangle
-+ packets going in or out of an ethernet device.
-+
- config WANT_COMPAT_NETLINK_MESSAGES
- bool
- help
---- a/net/core/dev.c
-+++ b/net/core/dev.c
-@@ -3252,10 +3252,20 @@ static int xmit_one(struct sk_buff *skb,
- if (!list_empty(&ptype_all) || !list_empty(&dev->ptype_all))
- dev_queue_xmit_nit(skb, dev);
-
-- len = skb->len;
-- trace_net_dev_start_xmit(skb, dev);
-- rc = netdev_start_xmit(skb, dev, txq, more);
-- trace_net_dev_xmit(skb, rc, dev, len);
-+#ifdef CONFIG_ETHERNET_PACKET_MANGLE
-+ if (!dev->eth_mangle_tx ||
-+ (skb = dev->eth_mangle_tx(dev, skb)) != NULL)
-+#else
-+ if (1)
-+#endif
-+ {
-+ len = skb->len;
-+ trace_net_dev_start_xmit(skb, dev);
-+ rc = netdev_start_xmit(skb, dev, txq, more);
-+ trace_net_dev_xmit(skb, rc, dev, len);
-+ } else {
-+ rc = NETDEV_TX_OK;
-+ }
-
- return rc;
- }
---- a/net/core/skbuff.c
-+++ b/net/core/skbuff.c
-@@ -63,6 +63,7 @@
- #include <linux/errqueue.h>
- #include <linux/prefetch.h>
- #include <linux/if_vlan.h>
-+#include <linux/if.h>
-
- #include <net/protocol.h>
- #include <net/dst.h>
-@@ -503,6 +504,22 @@ skb_fail:
- }
- EXPORT_SYMBOL(__napi_alloc_skb);
-
-+struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev,
-+ unsigned int length, gfp_t gfp)
-+{
-+ struct sk_buff *skb = __netdev_alloc_skb(dev, length + NET_IP_ALIGN, gfp);
-+
-+#ifdef CONFIG_ETHERNET_PACKET_MANGLE
-+ if (dev && (dev->priv_flags & IFF_NO_IP_ALIGN))
-+ return skb;
-+#endif
-+
-+ if (NET_IP_ALIGN && skb)
-+ skb_reserve(skb, NET_IP_ALIGN);
-+ return skb;
-+}
-+EXPORT_SYMBOL(__netdev_alloc_skb_ip_align);
-+
- void skb_add_rx_frag(struct sk_buff *skb, int i, struct page *page, int off,
- int size, unsigned int truesize)
- {
---- a/net/ethernet/eth.c
-+++ b/net/ethernet/eth.c
-@@ -172,6 +172,12 @@ __be16 eth_type_trans(struct sk_buff *sk
- const struct ethhdr *eth;
-
- skb->dev = dev;
-+
-+#ifdef CONFIG_ETHERNET_PACKET_MANGLE
-+ if (dev->eth_mangle_rx)
-+ dev->eth_mangle_rx(dev, skb);
-+#endif
-+
- skb_reset_mac_header(skb);
-
- eth = (struct ethhdr *)skb->data;
+++ /dev/null
-From 3cb240533ab787899dc7f17aa7d6c5b4810e2e58 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Fri, 7 Jul 2017 17:26:01 +0200
-Subject: bcm53xx: bgmac: use srab switch driver
-
-use the srab switch driver on these SoCs.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/net/ethernet/broadcom/bgmac-bcma.c | 1 +
- drivers/net/ethernet/broadcom/bgmac.c | 24 ++++++++++++++++++++++++
- drivers/net/ethernet/broadcom/bgmac.h | 4 ++++
- 3 files changed, 29 insertions(+)
-
---- a/drivers/net/ethernet/broadcom/bgmac-bcma.c
-+++ b/drivers/net/ethernet/broadcom/bgmac-bcma.c
-@@ -268,6 +268,7 @@ static int bgmac_probe(struct bcma_devic
- bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST;
- bgmac->feature_flags |= BGMAC_FEAT_NO_RESET;
- bgmac->feature_flags |= BGMAC_FEAT_FORCE_SPEED_2500;
-+ bgmac->feature_flags |= BGMAC_FEAT_SRAB;
- break;
- default:
- bgmac->feature_flags |= BGMAC_FEAT_CLKCTLST;
---- a/drivers/net/ethernet/broadcom/bgmac.c
-+++ b/drivers/net/ethernet/broadcom/bgmac.c
-@@ -12,6 +12,7 @@
- #include <linux/bcma/bcma.h>
- #include <linux/etherdevice.h>
- #include <linux/interrupt.h>
-+#include <linux/platform_data/b53.h>
- #include <linux/bcm47xx_nvram.h>
- #include <linux/phy.h>
- #include <linux/phy_fixed.h>
-@@ -1409,6 +1410,17 @@ static const struct ethtool_ops bgmac_et
- .set_link_ksettings = phy_ethtool_set_link_ksettings,
- };
-
-+static struct b53_platform_data bgmac_b53_pdata = {
-+};
-+
-+static struct platform_device bgmac_b53_dev = {
-+ .name = "b53-srab-switch",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = &bgmac_b53_pdata,
-+ },
-+};
-+
- /**************************************************
- * MII
- **************************************************/
-@@ -1540,6 +1552,14 @@ int bgmac_enet_probe(struct bgmac *bgmac
- net_dev->hw_features = net_dev->features;
- net_dev->vlan_features = net_dev->features;
-
-+ if ((bgmac->feature_flags & BGMAC_FEAT_SRAB) && !bgmac_b53_pdata.regs) {
-+ bgmac_b53_pdata.regs = ioremap_nocache(0x18007000, 0x1000);
-+
-+ err = platform_device_register(&bgmac_b53_dev);
-+ if (!err)
-+ bgmac->b53_device = &bgmac_b53_dev;
-+ }
-+
- err = register_netdev(bgmac->net_dev);
- if (err) {
- dev_err(bgmac->dev, "Cannot register net device\n");
-@@ -1562,6 +1582,10 @@ EXPORT_SYMBOL_GPL(bgmac_enet_probe);
-
- void bgmac_enet_remove(struct bgmac *bgmac)
- {
-+ if (bgmac->b53_device)
-+ platform_device_unregister(&bgmac_b53_dev);
-+ bgmac->b53_device = NULL;
-+
- unregister_netdev(bgmac->net_dev);
- phy_disconnect(bgmac->net_dev->phydev);
- netif_napi_del(&bgmac->napi);
---- a/drivers/net/ethernet/broadcom/bgmac.h
-+++ b/drivers/net/ethernet/broadcom/bgmac.h
-@@ -427,6 +427,7 @@
- #define BGMAC_FEAT_CC4_IF_SW_TYPE_RGMII BIT(18)
- #define BGMAC_FEAT_CC7_IF_TYPE_RGMII BIT(19)
- #define BGMAC_FEAT_IDM_MASK BIT(20)
-+#define BGMAC_FEAT_SRAB BIT(21)
-
- struct bgmac_slot_info {
- union {
-@@ -532,6 +533,9 @@ struct bgmac {
- void (*cmn_maskset32)(struct bgmac *bgmac, u16 offset, u32 mask,
- u32 set);
- int (*phy_connect)(struct bgmac *bgmac);
-+
-+ /* platform device for associated switch */
-+ struct platform_device *b53_device;
- };
-
- struct bgmac *bgmac_alloc(struct device *dev);
+++ /dev/null
-From 3b6115d6b57a263bdc8c9b1df273bd4a7955eead Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 8 Jul 2017 08:16:31 +0200
-Subject: debloat: add some debloat patches, strip down procfs and make O_DIRECT support optional, saves ~15K after lzma on MIPS
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/Kconfig | 3 +++
- net/core/Makefile | 3 ++-
- net/core/sock.c | 2 ++
- net/ipv4/Kconfig | 1 +
- net/netlink/Kconfig | 1 +
- net/packet/Kconfig | 1 +
- net/unix/Kconfig | 1 +
- 7 files changed, 11 insertions(+), 1 deletion(-)
-
---- a/net/Kconfig
-+++ b/net/Kconfig
-@@ -98,6 +98,9 @@ source "net/netlabel/Kconfig"
-
- endif # if INET
-
-+config SOCK_DIAG
-+ bool
-+
- config NETWORK_SECMARK
- bool "Security Marking"
- help
---- a/net/core/Makefile
-+++ b/net/core/Makefile
-@@ -10,9 +10,10 @@ obj-$(CONFIG_SYSCTL) += sysctl_net_core.
-
- obj-y += dev.o ethtool.o dev_addr_lists.o dst.o netevent.o \
- neighbour.o rtnetlink.o utils.o link_watch.o filter.o \
-- sock_diag.o dev_ioctl.o tso.o sock_reuseport.o \
-+ dev_ioctl.o tso.o sock_reuseport.o \
- fib_notifier.o xdp.o
-
-+obj-$(CONFIG_SOCK_DIAG) += sock_diag.o
- obj-y += net-sysfs.o
- obj-$(CONFIG_PAGE_POOL) += page_pool.o
- obj-$(CONFIG_PROC_FS) += net-procfs.o
---- a/net/core/sock.c
-+++ b/net/core/sock.c
-@@ -490,6 +490,18 @@ discard_and_relse:
- }
- EXPORT_SYMBOL(__sk_receive_skb);
-
-+u64 sock_gen_cookie(struct sock *sk)
-+{
-+ while (1) {
-+ u64 res = atomic64_read(&sk->sk_cookie);
-+
-+ if (res)
-+ return res;
-+ res = atomic64_inc_return(&sock_net(sk)->cookie_gen);
-+ atomic64_cmpxchg(&sk->sk_cookie, 0, res);
-+ }
-+}
-+
- struct dst_entry *__sk_dst_check(struct sock *sk, u32 cookie)
- {
- struct dst_entry *dst = __sk_dst_get(sk);
-@@ -1604,9 +1616,11 @@ static void __sk_free(struct sock *sk)
- if (likely(sk->sk_net_refcnt))
- sock_inuse_add(sock_net(sk), -1);
-
-+#ifdef CONFIG_SOCK_DIAG
- if (unlikely(sk->sk_net_refcnt && sock_diag_has_destroy_listeners(sk)))
- sock_diag_broadcast_destroy(sk);
- else
-+#endif
- sk_destruct(sk);
- }
-
---- a/net/core/sock_diag.c
-+++ b/net/core/sock_diag.c
-@@ -20,18 +20,6 @@ static int (*inet_rcv_compat)(struct sk_
- static DEFINE_MUTEX(sock_diag_table_mutex);
- static struct workqueue_struct *broadcast_wq;
-
--u64 sock_gen_cookie(struct sock *sk)
--{
-- while (1) {
-- u64 res = atomic64_read(&sk->sk_cookie);
--
-- if (res)
-- return res;
-- res = atomic64_inc_return(&sock_net(sk)->cookie_gen);
-- atomic64_cmpxchg(&sk->sk_cookie, 0, res);
-- }
--}
--
- int sock_diag_check_cookie(struct sock *sk, const __u32 *cookie)
- {
- u64 res;
---- a/net/ipv4/Kconfig
-+++ b/net/ipv4/Kconfig
-@@ -426,6 +426,7 @@ config INET_XFRM_MODE_BEET
-
- config INET_DIAG
- tristate "INET: socket monitoring interface"
-+ select SOCK_DIAG
- default y
- ---help---
- Support for INET (TCP, DCCP, etc) socket monitoring interface used by
---- a/net/netlink/Kconfig
-+++ b/net/netlink/Kconfig
-@@ -4,6 +4,7 @@
-
- config NETLINK_DIAG
- tristate "NETLINK: socket monitoring interface"
-+ select SOCK_DIAG
- default n
- ---help---
- Support for NETLINK socket monitoring interface used by the ss tool.
---- a/net/packet/Kconfig
-+++ b/net/packet/Kconfig
-@@ -18,6 +18,7 @@ config PACKET
- config PACKET_DIAG
- tristate "Packet: sockets monitoring interface"
- depends on PACKET
-+ select SOCK_DIAG
- default n
- ---help---
- Support for PF_PACKET sockets monitoring interface used by the ss tool.
---- a/net/unix/Kconfig
-+++ b/net/unix/Kconfig
-@@ -22,6 +22,7 @@ config UNIX
- config UNIX_DIAG
- tristate "UNIX: socket monitoring interface"
- depends on UNIX
-+ select SOCK_DIAG
- default n
- ---help---
- Support for UNIX socket monitoring interface used by the ss tool.
+++ /dev/null
-From 9e3f1d0805b2d919904dd9a4ff0d956314cc3cba Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 8 Jul 2017 08:20:09 +0200
-Subject: debloat: procfs
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- fs/locks.c | 2 ++
- fs/proc/Kconfig | 5 +++++
- fs/proc/consoles.c | 3 +++
- fs/proc/proc_tty.c | 11 ++++++++++-
- include/net/snmp.h | 18 +++++++++++++++++-
- ipc/msg.c | 3 +++
- ipc/sem.c | 2 ++
- ipc/shm.c | 2 ++
- ipc/util.c | 3 +++
- kernel/exec_domain.c | 2 ++
- kernel/irq/proc.c | 9 +++++++++
- kernel/time/timer_list.c | 2 ++
- mm/vmalloc.c | 2 ++
- mm/vmstat.c | 8 +++++---
- net/8021q/vlanproc.c | 6 ++++++
- net/core/net-procfs.c | 18 ++++++++++++------
- net/core/sock.c | 2 ++
- net/ipv4/fib_trie.c | 18 ++++++++++++------
- net/ipv4/proc.c | 3 +++
- net/ipv4/route.c | 3 +++
- 20 files changed, 105 insertions(+), 17 deletions(-)
-
---- a/fs/locks.c
-+++ b/fs/locks.c
-@@ -2786,6 +2786,8 @@ static const struct seq_operations locks
-
- static int __init proc_locks_init(void)
- {
-+ if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+ return 0;
- proc_create_seq_private("locks", 0, NULL, &locks_seq_operations,
- sizeof(struct locks_iterator), NULL);
- return 0;
---- a/fs/proc/Kconfig
-+++ b/fs/proc/Kconfig
-@@ -97,3 +97,8 @@ config PROC_CHILDREN
-
- Say Y if you are running any user-space software which takes benefit from
- this interface. For example, rkt is such a piece of software.
-+
-+config PROC_STRIPPED
-+ default n
-+ depends on EXPERT
-+ bool "Strip non-essential /proc functionality to reduce code size"
---- a/fs/proc/consoles.c
-+++ b/fs/proc/consoles.c
-@@ -93,6 +93,9 @@ static const struct seq_operations conso
-
- static int __init proc_consoles_init(void)
- {
-+ if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+ return 0;
-+
- proc_create_seq("consoles", 0, NULL, &consoles_op);
- return 0;
- }
---- a/fs/proc/proc_tty.c
-+++ b/fs/proc/proc_tty.c
-@@ -133,7 +133,10 @@ static const struct seq_operations tty_d
- void proc_tty_register_driver(struct tty_driver *driver)
- {
- struct proc_dir_entry *ent;
--
-+
-+ if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+ return;
-+
- if (!driver->driver_name || driver->proc_entry ||
- !driver->ops->proc_show)
- return;
-@@ -150,6 +153,9 @@ void proc_tty_unregister_driver(struct t
- {
- struct proc_dir_entry *ent;
-
-+ if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+ return;
-+
- ent = driver->proc_entry;
- if (!ent)
- return;
-@@ -164,6 +170,9 @@ void proc_tty_unregister_driver(struct t
- */
- void __init proc_tty_init(void)
- {
-+ if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+ return;
-+
- if (!proc_mkdir("tty", NULL))
- return;
- proc_mkdir("tty/ldisc", NULL); /* Preserved: it's userspace visible */
---- a/include/net/snmp.h
-+++ b/include/net/snmp.h
-@@ -123,6 +123,21 @@ struct linux_xfrm_mib {
- #define DECLARE_SNMP_STAT(type, name) \
- extern __typeof__(type) __percpu *name
-
-+#ifdef CONFIG_PROC_STRIPPED
-+#define __SNMP_STATS_DUMMY(mib) \
-+ do { (void) mib->mibs[0]; } while(0)
-+
-+#define __SNMP_INC_STATS(mib, field) __SNMP_STATS_DUMMY(mib)
-+#define SNMP_INC_STATS_ATOMIC_LONG(mib, field) __SNMP_STATS_DUMMY(mib)
-+#define SNMP_INC_STATS(mib, field) __SNMP_STATS_DUMMY(mib)
-+#define SNMP_DEC_STATS(mib, field) __SNMP_STATS_DUMMY(mib)
-+#define __SNMP_ADD_STATS(mib, field, addend) __SNMP_STATS_DUMMY(mib)
-+#define SNMP_ADD_STATS(mib, field, addend) __SNMP_STATS_DUMMY(mib)
-+#define SNMP_UPD_PO_STATS(mib, basefield, addend) __SNMP_STATS_DUMMY(mib)
-+#define __SNMP_UPD_PO_STATS(mib, basefield, addend) __SNMP_STATS_DUMMY(mib)
-+
-+#else
-+
- #define __SNMP_INC_STATS(mib, field) \
- __this_cpu_inc(mib->mibs[field])
-
-@@ -153,8 +168,9 @@ struct linux_xfrm_mib {
- __this_cpu_add(ptr[basefield##OCTETS], addend); \
- } while (0)
-
-+#endif
-
--#if BITS_PER_LONG==32
-+#if (BITS_PER_LONG==32) && !defined(CONFIG_PROC_STRIPPED)
-
- #define __SNMP_ADD_STATS64(mib, field, addend) \
- do { \
---- a/ipc/msg.c
-+++ b/ipc/msg.c
-@@ -1292,6 +1292,9 @@ void __init msg_init(void)
- {
- msg_init_ns(&init_ipc_ns);
-
-+ if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+ return;
-+
- ipc_init_proc_interface("sysvipc/msg",
- " key msqid perms cbytes qnum lspid lrpid uid gid cuid cgid stime rtime ctime\n",
- IPC_MSG_IDS, sysvipc_msg_proc_show);
---- a/ipc/sem.c
-+++ b/ipc/sem.c
-@@ -243,6 +243,8 @@ void sem_exit_ns(struct ipc_namespace *n
- void __init sem_init(void)
- {
- sem_init_ns(&init_ipc_ns);
-+ if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+ return;
- ipc_init_proc_interface("sysvipc/sem",
- " key semid perms nsems uid gid cuid cgid otime ctime\n",
- IPC_SEM_IDS, sysvipc_sem_proc_show);
---- a/ipc/shm.c
-+++ b/ipc/shm.c
-@@ -144,6 +144,8 @@ pure_initcall(ipc_ns_init);
-
- void __init shm_init(void)
- {
-+ if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+ return;
- ipc_init_proc_interface("sysvipc/shm",
- #if BITS_PER_LONG <= 32
- " key shmid perms size cpid lpid nattch uid gid cuid cgid atime dtime ctime rss swap\n",
---- a/ipc/util.c
-+++ b/ipc/util.c
-@@ -140,6 +140,9 @@ void __init ipc_init_proc_interface(cons
- struct proc_dir_entry *pde;
- struct ipc_proc_iface *iface;
-
-+ if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+ return;
-+
- iface = kmalloc(sizeof(*iface), GFP_KERNEL);
- if (!iface)
- return;
---- a/kernel/exec_domain.c
-+++ b/kernel/exec_domain.c
-@@ -29,6 +29,8 @@ static int execdomains_proc_show(struct
-
- static int __init proc_execdomains_init(void)
- {
-+ if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+ return 0;
- proc_create_single("execdomains", 0, NULL, execdomains_proc_show);
- return 0;
- }
---- a/kernel/irq/proc.c
-+++ b/kernel/irq/proc.c
-@@ -355,6 +355,9 @@ void register_irq_proc(unsigned int irq,
- void __maybe_unused *irqp = (void *)(unsigned long) irq;
- char name [MAX_NAMELEN];
-
-+ if (IS_ENABLED(CONFIG_PROC_STRIPPED) && !IS_ENABLED(CONFIG_SMP))
-+ return;
-+
- if (!root_irq_dir || (desc->irq_data.chip == &no_irq_chip))
- return;
-
-@@ -408,6 +411,9 @@ void unregister_irq_proc(unsigned int ir
- {
- char name [MAX_NAMELEN];
-
-+ if (IS_ENABLED(CONFIG_PROC_STRIPPED) && !IS_ENABLED(CONFIG_SMP))
-+ return;
-+
- if (!root_irq_dir || !desc->dir)
- return;
- #ifdef CONFIG_SMP
-@@ -446,6 +452,9 @@ void init_irq_proc(void)
- unsigned int irq;
- struct irq_desc *desc;
-
-+ if (IS_ENABLED(CONFIG_PROC_STRIPPED) && !IS_ENABLED(CONFIG_SMP))
-+ return;
-+
- /* create /proc/irq */
- root_irq_dir = proc_mkdir("irq", NULL);
- if (!root_irq_dir)
---- a/kernel/time/timer_list.c
-+++ b/kernel/time/timer_list.c
-@@ -375,6 +375,8 @@ static int __init init_timer_list_procfs
- {
- struct proc_dir_entry *pe;
-
-+ if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+ return 0;
- pe = proc_create_seq_private("timer_list", 0400, NULL, &timer_list_sops,
- sizeof(struct timer_list_iter), NULL);
- if (!pe)
---- a/mm/vmalloc.c
-+++ b/mm/vmalloc.c
-@@ -2764,6 +2764,8 @@ static const struct seq_operations vmall
-
- static int __init proc_vmalloc_init(void)
- {
-+ if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+ return 0;
- if (IS_ENABLED(CONFIG_NUMA))
- proc_create_seq_private("vmallocinfo", 0400, NULL,
- &vmalloc_op,
---- a/mm/vmstat.c
-+++ b/mm/vmstat.c
-@@ -1972,10 +1972,12 @@ void __init init_mm_internals(void)
- start_shepherd_timer();
- #endif
- #ifdef CONFIG_PROC_FS
-- proc_create_seq("buddyinfo", 0444, NULL, &fragmentation_op);
-- proc_create_seq("pagetypeinfo", 0400, NULL, &pagetypeinfo_op);
-+ if (!IS_ENABLED(CONFIG_PROC_STRIPPED)) {
-+ proc_create_seq("buddyinfo", 0444, NULL, &fragmentation_op);
-+ proc_create_seq("pagetypeinfo", 0400, NULL, &pagetypeinfo_op);
-+ proc_create_seq("zoneinfo", 0444, NULL, &zoneinfo_op);
-+ }
- proc_create_seq("vmstat", 0444, NULL, &vmstat_op);
-- proc_create_seq("zoneinfo", 0444, NULL, &zoneinfo_op);
- #endif
- }
-
---- a/net/8021q/vlanproc.c
-+++ b/net/8021q/vlanproc.c
-@@ -96,6 +96,9 @@ void vlan_proc_cleanup(struct net *net)
- {
- struct vlan_net *vn = net_generic(net, vlan_net_id);
-
-+ if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+ return;
-+
- if (vn->proc_vlan_conf)
- remove_proc_entry(name_conf, vn->proc_vlan_dir);
-
-@@ -115,6 +118,9 @@ int __net_init vlan_proc_init(struct net
- {
- struct vlan_net *vn = net_generic(net, vlan_net_id);
-
-+ if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+ return 0;
-+
- vn->proc_vlan_dir = proc_net_mkdir(net, name_root, net->proc_net);
- if (!vn->proc_vlan_dir)
- goto err;
---- a/net/core/net-procfs.c
-+++ b/net/core/net-procfs.c
-@@ -279,10 +279,12 @@ static int __net_init dev_proc_net_init(
- if (!proc_create_net("dev", 0444, net->proc_net, &dev_seq_ops,
- sizeof(struct seq_net_private)))
- goto out;
-- if (!proc_create_seq("softnet_stat", 0444, net->proc_net,
-+ if (!IS_ENABLED(CONFIG_PROC_STRIPPED) &&
-+ !proc_create_seq("softnet_stat", 0444, net->proc_net,
- &softnet_seq_ops))
- goto out_dev;
-- if (!proc_create_net("ptype", 0444, net->proc_net, &ptype_seq_ops,
-+ if (!IS_ENABLED(CONFIG_PROC_STRIPPED) &&
-+ !proc_create_net("ptype", 0444, net->proc_net, &ptype_seq_ops,
- sizeof(struct seq_net_private)))
- goto out_softnet;
-
-@@ -292,9 +294,11 @@ static int __net_init dev_proc_net_init(
- out:
- return rc;
- out_ptype:
-- remove_proc_entry("ptype", net->proc_net);
-+ if (!IS_ENABLED(CONFIG_PROC_STRIPPED))
-+ remove_proc_entry("ptype", net->proc_net);
- out_softnet:
-- remove_proc_entry("softnet_stat", net->proc_net);
-+ if (!IS_ENABLED(CONFIG_PROC_STRIPPED))
-+ remove_proc_entry("softnet_stat", net->proc_net);
- out_dev:
- remove_proc_entry("dev", net->proc_net);
- goto out;
-@@ -304,8 +308,10 @@ static void __net_exit dev_proc_net_exit
- {
- wext_proc_exit(net);
-
-- remove_proc_entry("ptype", net->proc_net);
-- remove_proc_entry("softnet_stat", net->proc_net);
-+ if (!IS_ENABLED(CONFIG_PROC_STRIPPED)) {
-+ remove_proc_entry("ptype", net->proc_net);
-+ remove_proc_entry("softnet_stat", net->proc_net);
-+ }
- remove_proc_entry("dev", net->proc_net);
- }
-
---- a/net/core/sock.c
-+++ b/net/core/sock.c
-@@ -3491,6 +3491,8 @@ static __net_initdata struct pernet_oper
-
- static int __init proto_init(void)
- {
-+ if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+ return 0;
- return register_pernet_subsys(&proto_net_ops);
- }
-
---- a/net/ipv4/fib_trie.c
-+++ b/net/ipv4/fib_trie.c
-@@ -2720,11 +2720,13 @@ static const struct seq_operations fib_r
-
- int __net_init fib_proc_init(struct net *net)
- {
-- if (!proc_create_net("fib_trie", 0444, net->proc_net, &fib_trie_seq_ops,
-+ if (!IS_ENABLED(CONFIG_PROC_STRIPPED) &&
-+ !proc_create_net("fib_trie", 0444, net->proc_net, &fib_trie_seq_ops,
- sizeof(struct fib_trie_iter)))
- goto out1;
-
-- if (!proc_create_net_single("fib_triestat", 0444, net->proc_net,
-+ if (!IS_ENABLED(CONFIG_PROC_STRIPPED) &&
-+ !proc_create_net_single("fib_triestat", 0444, net->proc_net,
- fib_triestat_seq_show, NULL))
- goto out2;
-
-@@ -2735,17 +2737,21 @@ int __net_init fib_proc_init(struct net
- return 0;
-
- out3:
-- remove_proc_entry("fib_triestat", net->proc_net);
-+ if (!IS_ENABLED(CONFIG_PROC_STRIPPED))
-+ remove_proc_entry("fib_triestat", net->proc_net);
- out2:
-- remove_proc_entry("fib_trie", net->proc_net);
-+ if (!IS_ENABLED(CONFIG_PROC_STRIPPED))
-+ remove_proc_entry("fib_trie", net->proc_net);
- out1:
- return -ENOMEM;
- }
-
- void __net_exit fib_proc_exit(struct net *net)
- {
-- remove_proc_entry("fib_trie", net->proc_net);
-- remove_proc_entry("fib_triestat", net->proc_net);
-+ if (!IS_ENABLED(CONFIG_PROC_STRIPPED)) {
-+ remove_proc_entry("fib_trie", net->proc_net);
-+ remove_proc_entry("fib_triestat", net->proc_net);
-+ }
- remove_proc_entry("route", net->proc_net);
- }
-
---- a/net/ipv4/proc.c
-+++ b/net/ipv4/proc.c
-@@ -524,5 +524,8 @@ static __net_initdata struct pernet_oper
-
- int __init ip_misc_proc_init(void)
- {
-+ if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+ return 0;
-+
- return register_pernet_subsys(&ip_proc_ops);
- }
---- a/net/ipv4/route.c
-+++ b/net/ipv4/route.c
-@@ -411,6 +411,9 @@ static struct pernet_operations ip_rt_pr
-
- static int __init ip_rt_proc_init(void)
- {
-+ if (IS_ENABLED(CONFIG_PROC_STRIPPED))
-+ return 0;
-+
- return register_pernet_subsys(&ip_rt_proc_ops);
- }
-
+++ /dev/null
-From e3692cb2fcd5ba1244512a0f43b8118f65f1c375 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 8 Jul 2017 08:20:43 +0200
-Subject: debloat: dmabuf
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/base/Kconfig | 2 +-
- drivers/dma-buf/Makefile | 10 +++++++---
- drivers/dma-buf/dma-buf.c | 4 +++-
- kernel/sched/core.c | 1 +
- 4 files changed, 12 insertions(+), 5 deletions(-)
-
---- a/drivers/base/Kconfig
-+++ b/drivers/base/Kconfig
-@@ -172,7 +172,7 @@ config SOC_BUS
- source "drivers/base/regmap/Kconfig"
-
- config DMA_SHARED_BUFFER
-- bool
-+ tristate
- default n
- select ANON_INODES
- select IRQ_WORK
---- a/drivers/dma-buf/Makefile
-+++ b/drivers/dma-buf/Makefile
-@@ -1,3 +1,7 @@
--obj-y := dma-buf.o dma-fence.o dma-fence-array.o reservation.o seqno-fence.o
--obj-$(CONFIG_SYNC_FILE) += sync_file.o
--obj-$(CONFIG_SW_SYNC) += sw_sync.o sync_debug.o
-+obj-$(CONFIG_DMA_SHARED_BUFFER) := dma-shared-buffer.o
-+
-+dma-buf-objs-y := dma-buf.o dma-fence.o dma-fence-array.o reservation.o seqno-fence.o
-+dma-buf-objs-$(CONFIG_SYNC_FILE) += sync_file.o
-+dma-buf-objs-$(CONFIG_SW_SYNC) += sw_sync.o sync_debug.o
-+
-+dma-shared-buffer-objs := $(dma-buf-objs-y)
---- a/drivers/dma-buf/dma-buf.c
-+++ b/drivers/dma-buf/dma-buf.c
-@@ -34,6 +34,7 @@
- #include <linux/poll.h>
- #include <linux/reservation.h>
- #include <linux/mm.h>
-+#include <linux/module.h>
-
- #include <uapi/linux/dma-buf.h>
-
-@@ -1159,4 +1160,5 @@ static void __exit dma_buf_deinit(void)
- {
- dma_buf_uninit_debugfs();
- }
--__exitcall(dma_buf_deinit);
-+module_exit(dma_buf_deinit);
-+MODULE_LICENSE("GPL");
---- a/kernel/sched/core.c
-+++ b/kernel/sched/core.c
-@@ -2129,6 +2129,7 @@ int wake_up_state(struct task_struct *p,
- {
- return try_to_wake_up(p, state, 0);
- }
-+EXPORT_SYMBOL_GPL(wake_up_state);
-
- /*
- * Perform scheduler related setup for a newly forked process p.
+++ /dev/null
-From 0d37e6edc09c99e683dd91ca0e83bbc0df8477b3 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sun, 16 Jul 2017 16:56:10 +0200
-Subject: lib: add uevent_next_seqnum()
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/kobject.h | 5 +++++
- lib/kobject_uevent.c | 37 +++++++++++++++++++++++++++++++++++++
- 2 files changed, 42 insertions(+)
-
---- a/lib/kobject_uevent.c
-+++ b/lib/kobject_uevent.c
-@@ -179,6 +179,18 @@ out:
- return r;
- }
-
-+u64 uevent_next_seqnum(void)
-+{
-+ u64 seq;
-+
-+ mutex_lock(&uevent_sock_mutex);
-+ seq = ++uevent_seqnum;
-+ mutex_unlock(&uevent_sock_mutex);
-+
-+ return seq;
-+}
-+EXPORT_SYMBOL_GPL(uevent_next_seqnum);
-+
- /**
- * kobject_synth_uevent - send synthetic uevent with arguments
- *
+++ /dev/null
-From 0d37e6edc09c99e683dd91ca0e83bbc0df8477b3 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sun, 16 Jul 2017 16:56:10 +0200
-Subject: lib: add uevent_next_seqnum()
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/kobject.h | 5 +++++
- lib/kobject_uevent.c | 37 +++++++++++++++++++++++++++++++++++++
- 2 files changed, 42 insertions(+)
-
---- a/include/linux/kobject.h
-+++ b/include/linux/kobject.h
-@@ -32,6 +32,8 @@
- #define UEVENT_NUM_ENVP 32 /* number of env pointers */
- #define UEVENT_BUFFER_SIZE 2048 /* buffer for the variables */
-
-+struct sk_buff;
-+
- #ifdef CONFIG_UEVENT_HELPER
- /* path to the userspace helper executed on an event */
- extern char uevent_helper[];
-@@ -244,4 +246,7 @@ int kobject_synth_uevent(struct kobject
- __printf(2, 3)
- int add_uevent_var(struct kobj_uevent_env *env, const char *format, ...);
-
-+int broadcast_uevent(struct sk_buff *skb, __u32 pid, __u32 group,
-+ gfp_t allocation);
-+
- #endif /* _KOBJECT_H_ */
---- a/lib/kobject_uevent.c
-+++ b/lib/kobject_uevent.c
-@@ -688,6 +688,43 @@ int add_uevent_var(struct kobj_uevent_en
- EXPORT_SYMBOL_GPL(add_uevent_var);
-
- #if defined(CONFIG_NET)
-+int broadcast_uevent(struct sk_buff *skb, __u32 pid, __u32 group,
-+ gfp_t allocation)
-+{
-+ struct uevent_sock *ue_sk;
-+ int err = 0;
-+
-+ /* send netlink message */
-+ mutex_lock(&uevent_sock_mutex);
-+ list_for_each_entry(ue_sk, &uevent_sock_list, list) {
-+ struct sock *uevent_sock = ue_sk->sk;
-+ struct sk_buff *skb2;
-+
-+ skb2 = skb_clone(skb, allocation);
-+ if (!skb2)
-+ break;
-+
-+ err = netlink_broadcast(uevent_sock, skb2, pid, group,
-+ allocation);
-+ if (err)
-+ break;
-+ }
-+ mutex_unlock(&uevent_sock_mutex);
-+
-+ kfree_skb(skb);
-+ return err;
-+}
-+#else
-+int broadcast_uevent(struct sk_buff *skb, __u32 pid, __u32 group,
-+ gfp_t allocation)
-+{
-+ kfree_skb(skb);
-+ return 0;
-+}
-+#endif
-+EXPORT_SYMBOL_GPL(broadcast_uevent);
-+
-+#if defined(CONFIG_NET)
- static int uevent_net_broadcast(struct sock *usk, struct sk_buff *skb,
- struct netlink_ext_ack *extack)
- {
+++ /dev/null
-From 5d301596fdc72f6cb672f72eb3c66e7cddefb103 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 8 Jul 2017 08:26:02 +0200
-Subject: initramfs: always create console node
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- usr/gen_initramfs_list.sh | 14 ++++++++++++++
- 1 file changed, 14 insertions(+)
-
---- a/usr/gen_initramfs_list.sh
-+++ b/usr/gen_initramfs_list.sh
-@@ -59,6 +59,18 @@ default_initramfs() {
- EOF
- }
-
-+list_openwrt_initramfs() {
-+ :
-+}
-+
-+openwrt_initramfs() {
-+ # make sure that /dev/console exists
-+ cat <<-EOF >> ${output}
-+ dir /dev 0755 0 0
-+ nod /dev/console 0600 0 0 c 5 1
-+ EOF
-+}
-+
- filetype() {
- local argv1="$1"
-
-@@ -180,6 +192,8 @@ dir_filelist() {
- if [ "$(echo "${dirlist}" | wc -l)" -gt 1 ]; then
- ${dep_list}print_mtime "$1"
-
-+ ${dep_list}openwrt_initramfs
-+
- echo "${dirlist}" | \
- while read x; do
- ${dep_list}parse ${x}
+++ /dev/null
-From 6b1ab74a9917012d0c559edc4ed299d9228ac89f Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 8 Jul 2017 08:26:47 +0200
-Subject: kernel: add the new 'crashlog' feature
-
-this tries to store kernel oops/panic logs in a fixed location in RAM to
-recover them available to user space using debugfs
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/crashlog.h | 17 ++++
- init/Kconfig | 4 +
- kernel/Makefile | 1 +
- kernel/crashlog.c | 213 +++++++++++++++++++++++++++++++++++++++++++++++
- kernel/module.c | 3 +
- mm/bootmem.c | 2 +
- mm/memblock.c | 5 ++
- 7 files changed, 245 insertions(+)
- create mode 100644 include/linux/crashlog.h
- create mode 100644 kernel/crashlog.c
-
---- /dev/null
-+++ b/include/linux/crashlog.h
-@@ -0,0 +1,17 @@
-+#ifndef __CRASHLOG_H
-+#define __CRASHLOG_H
-+
-+#ifdef CONFIG_CRASHLOG
-+void crashlog_init_bootmem(struct bootmem_data *bdata);
-+void crashlog_init_memblock(phys_addr_t addr, phys_addr_t size);
-+#else
-+static inline void crashlog_init_bootmem(struct bootmem_data *bdata)
-+{
-+}
-+
-+static inline void crashlog_init_memblock(phys_addr_t addr, phys_addr_t size)
-+{
-+}
-+#endif
-+
-+#endif
---- a/init/Kconfig
-+++ b/init/Kconfig
-@@ -1049,6 +1049,10 @@ config RELAY
-
- If unsure, say N.
-
-+config CRASHLOG
-+ bool "Crash logging"
-+ depends on (!NO_BOOTMEM || HAVE_MEMBLOCK)
-+
- config BLK_DEV_INITRD
- bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support"
- help
---- a/kernel/Makefile
-+++ b/kernel/Makefile
-@@ -114,6 +114,7 @@ obj-$(CONFIG_TORTURE_TEST) += torture.o
- obj-$(CONFIG_HAS_IOMEM) += iomem.o
- obj-$(CONFIG_ZONE_DEVICE) += memremap.o
- obj-$(CONFIG_RSEQ) += rseq.o
-+obj-$(CONFIG_CRASHLOG) += crashlog.o
-
- $(obj)/configs.o: $(obj)/config_data.h
-
---- /dev/null
-+++ b/kernel/crashlog.c
-@@ -0,0 +1,213 @@
-+/*
-+ * Crash information logger
-+ * Copyright (C) 2010 Felix Fietkau <nbd@nbd.name>
-+ *
-+ * Based on ramoops.c
-+ * Copyright (C) 2010 Marco Stornelli <marco.stornelli@gmail.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
-+ * 02110-1301 USA
-+ *
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/bootmem.h>
-+#include <linux/memblock.h>
-+#include <linux/debugfs.h>
-+#include <linux/crashlog.h>
-+#include <linux/kmsg_dump.h>
-+#include <linux/module.h>
-+#include <linux/pfn.h>
-+#include <linux/vmalloc.h>
-+#include <asm/io.h>
-+
-+#define CRASHLOG_PAGES 4
-+#define CRASHLOG_SIZE (CRASHLOG_PAGES * PAGE_SIZE)
-+#define CRASHLOG_MAGIC 0xa1eedead
-+
-+/*
-+ * Start the log at 1M before the end of RAM, as some boot loaders like
-+ * to use the end of the RAM for stack usage and other things
-+ * If this fails, fall back to using the last part.
-+ */
-+#define CRASHLOG_OFFSET (1024 * 1024)
-+
-+struct crashlog_data {
-+ u32 magic;
-+ u32 len;
-+ u8 data[];
-+};
-+
-+static struct debugfs_blob_wrapper crashlog_blob;
-+static unsigned long crashlog_addr = 0;
-+static struct crashlog_data *crashlog_buf;
-+static struct kmsg_dumper dump;
-+static bool first = true;
-+
-+extern struct list_head *crashlog_modules;
-+
-+static bool crashlog_set_addr(phys_addr_t addr, phys_addr_t size)
-+{
-+ /* Limit to lower 64 MB to avoid highmem */
-+ phys_addr_t limit = 64 * 1024 * 1024;
-+
-+ if (crashlog_addr)
-+ return false;
-+
-+ if (addr > limit)
-+ return false;
-+
-+ if (addr + size > limit)
-+ size = limit - addr;
-+
-+ crashlog_addr = addr;
-+
-+ if (addr + size > CRASHLOG_OFFSET)
-+ crashlog_addr += size - CRASHLOG_OFFSET;
-+
-+ return true;
-+}
-+
-+#ifndef CONFIG_NO_BOOTMEM
-+void __init crashlog_init_bootmem(bootmem_data_t *bdata)
-+{
-+ phys_addr_t start, end;
-+
-+ start = PFN_PHYS(bdata->node_low_pfn);
-+ end = PFN_PHYS(bdata->node_min_pfn);
-+ if (!crashlog_set_addr(start, end - start))
-+ return;
-+
-+ if (reserve_bootmem(crashlog_addr, CRASHLOG_SIZE, BOOTMEM_EXCLUSIVE) < 0) {
-+ printk("Crashlog failed to allocate RAM at address 0x%lx\n",
-+ crashlog_addr);
-+ crashlog_addr = 0;
-+ }
-+}
-+#endif
-+
-+#ifdef CONFIG_HAVE_MEMBLOCK
-+void __init_memblock crashlog_init_memblock(phys_addr_t addr, phys_addr_t size)
-+{
-+ if (!crashlog_set_addr(addr, size))
-+ return;
-+
-+ if (memblock_reserve(crashlog_addr, CRASHLOG_SIZE)) {
-+ printk("Crashlog failed to allocate RAM at address 0x%lx\n",
-+ crashlog_addr);
-+ crashlog_addr = 0;
-+ }
-+}
-+#endif
-+
-+static void __init crashlog_copy(void)
-+{
-+ if (crashlog_buf->magic != CRASHLOG_MAGIC)
-+ return;
-+
-+ if (!crashlog_buf->len || crashlog_buf->len >
-+ CRASHLOG_SIZE - sizeof(*crashlog_buf))
-+ return;
-+
-+ crashlog_blob.size = crashlog_buf->len;
-+ crashlog_blob.data = kmemdup(crashlog_buf->data,
-+ crashlog_buf->len, GFP_KERNEL);
-+
-+ debugfs_create_blob("crashlog", 0700, NULL, &crashlog_blob);
-+}
-+
-+static int get_maxlen(void)
-+{
-+ return CRASHLOG_SIZE - sizeof(*crashlog_buf) - crashlog_buf->len;
-+}
-+
-+static void crashlog_printf(const char *fmt, ...)
-+{
-+ va_list args;
-+ int len = get_maxlen();
-+
-+ if (!len)
-+ return;
-+
-+ va_start(args, fmt);
-+ crashlog_buf->len += vscnprintf(
-+ &crashlog_buf->data[crashlog_buf->len],
-+ len, fmt, args);
-+ va_end(args);
-+}
-+
-+static void crashlog_do_dump(struct kmsg_dumper *dumper,
-+ enum kmsg_dump_reason reason)
-+{
-+ struct timeval tv;
-+ struct module *m;
-+ char *buf;
-+ size_t len;
-+
-+ if (!first)
-+ crashlog_printf("\n===================================\n");
-+
-+ do_gettimeofday(&tv);
-+ crashlog_printf("Time: %lu.%lu\n",
-+ (long)tv.tv_sec, (long)tv.tv_usec);
-+
-+ if (first) {
-+ crashlog_printf("Modules:");
-+ list_for_each_entry(m, crashlog_modules, list) {
-+ crashlog_printf("\t%s@%p+%x", m->name,
-+ m->core_layout.base, m->core_layout.size,
-+ m->init_layout.base, m->init_layout.size);
-+ }
-+ crashlog_printf("\n");
-+ first = false;
-+ }
-+
-+ buf = (char *)&crashlog_buf->data[crashlog_buf->len];
-+
-+ kmsg_dump_get_buffer(dumper, true, buf, get_maxlen(), &len);
-+
-+ crashlog_buf->len += len;
-+}
-+
-+
-+int __init crashlog_init_fs(void)
-+{
-+ struct page *pages[CRASHLOG_PAGES];
-+ pgprot_t prot;
-+ int i;
-+
-+ if (!crashlog_addr) {
-+ printk("No memory allocated for crashlog\n");
-+ return -ENOMEM;
-+ }
-+
-+ printk("Crashlog allocated RAM at address 0x%lx\n", (unsigned long) crashlog_addr);
-+ for (i = 0; i < CRASHLOG_PAGES; i++)
-+ pages[i] = pfn_to_page((crashlog_addr >> PAGE_SHIFT) + i);
-+
-+ prot = pgprot_writecombine(PAGE_KERNEL);
-+ crashlog_buf = vmap(pages, CRASHLOG_PAGES, VM_MAP, prot);
-+
-+ crashlog_copy();
-+
-+ crashlog_buf->magic = CRASHLOG_MAGIC;
-+ crashlog_buf->len = 0;
-+
-+ dump.max_reason = KMSG_DUMP_OOPS;
-+ dump.dump = crashlog_do_dump;
-+ kmsg_dump_register(&dump);
-+
-+ return 0;
-+}
-+module_init(crashlog_init_fs);
---- a/kernel/module.c
-+++ b/kernel/module.c
-@@ -251,6 +251,9 @@ static void mod_update_bounds(struct mod
- #ifdef CONFIG_KGDB_KDB
- struct list_head *kdb_modules = &modules; /* kdb needs the list of modules */
- #endif /* CONFIG_KGDB_KDB */
-+#ifdef CONFIG_CRASHLOG
-+struct list_head *crashlog_modules = &modules;
-+#endif
-
- static void module_assert_mutex(void)
- {
---- a/mm/bootmem.c
-+++ b/mm/bootmem.c
-@@ -15,6 +15,7 @@
- #include <linux/export.h>
- #include <linux/kmemleak.h>
- #include <linux/range.h>
-+#include <linux/crashlog.h>
- #include <linux/bug.h>
- #include <linux/io.h>
- #include <linux/bootmem.h>
-@@ -215,6 +216,7 @@ static unsigned long __init free_all_boo
- if (!bdata->node_bootmem_map)
- return 0;
-
-+ crashlog_init_bootmem(bdata);
- map = bdata->node_bootmem_map;
- start = bdata->node_min_pfn;
- end = bdata->node_low_pfn;
---- a/mm/memblock.c
-+++ b/mm/memblock.c
-@@ -21,6 +21,7 @@
- #include <linux/seq_file.h>
- #include <linux/memblock.h>
- #include <linux/bootmem.h>
-+#include <linux/crashlog.h>
-
- #include <asm/sections.h>
- #include <linux/io.h>
-@@ -547,6 +548,8 @@ static void __init_memblock memblock_ins
- memblock_set_region_node(rgn, nid);
- type->cnt++;
- type->total_size += size;
-+ if (type == &memblock.memory)
-+ crashlog_init_memblock(base, size);
- }
-
- /**
-@@ -586,6 +589,8 @@ int __init_memblock memblock_add_range(s
- type->regions[0].flags = flags;
- memblock_set_region_node(&type->regions[0], nid);
- type->total_size = size;
-+ if (type == &memblock.memory)
-+ crashlog_init_memblock(base, size);
- return 0;
- }
- repeat:
+++ /dev/null
-From d9c8bc8c1408f3e8529db6e4e04017b4c579c342 Mon Sep 17 00:00:00 2001
-From: Pawel Dembicki <paweldembicki@gmail.com>
-Date: Sun, 18 Feb 2018 17:08:04 +0100
-Subject: [PATCH] w1: gpio: fix problem with platfom data in w1-gpio
-
-In devices, where fdt is used, is impossible to apply platform data
-without proper fdt node.
-
-This patch allow to use platform data in devices with fdt.
-
-Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
----
- drivers/w1/masters/w1-gpio.c | 7 +++----
- 1 file changed, 3 insertions(+), 4 deletions(-)
-
---- a/drivers/w1/masters/w1-gpio.c
-+++ b/drivers/w1/masters/w1-gpio.c
-@@ -79,7 +79,7 @@ static int w1_gpio_probe(struct platform
- enum gpiod_flags gflags = GPIOD_OUT_LOW_OPEN_DRAIN;
- int err;
-
-- if (of_have_populated_dt()) {
-+ if (of_have_populated_dt() && !dev_get_platdata(&pdev->dev)) {
- pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
- if (!pdata)
- return -ENOMEM;
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Wed, 18 Apr 2018 10:50:05 +0200
-Subject: [PATCH] MIPS: only process negative stack offsets on stack traces
-
-Fixes endless back traces in cases where the compiler emits a stack
-pointer increase in a branch delay slot (probably for some form of
-function return).
-
-[ 3.475442] BUG: MAX_STACK_TRACE_ENTRIES too low!
-[ 3.480070] turning off the locking correctness validator.
-[ 3.485521] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.34 #0
-[ 3.491475] Stack : 00000000 00000000 00000000 00000000 80e0fce2 00000034 00000000 00000000
-[ 3.499764] 87c3838c 80696377 8061047c 00000000 00000001 00000001 87c2d850 6534689f
-[ 3.508059] 00000000 00000000 80e10000 00000000 00000000 000000cf 0000000f 00000000
-[ 3.516353] 00000000 806a0000 00076891 00000000 00000000 00000000 ffffffff 00000000
-[ 3.524648] 806c0000 00000004 80e10000 806a0000 00000003 80690000 00000000 80700000
-[ 3.532942] ...
-[ 3.535362] Call Trace:
-[ 3.537818] [<80010a48>] show_stack+0x58/0x100
-[ 3.542207] [<804c2f78>] dump_stack+0xe8/0x170
-[ 3.546613] [<80079f90>] save_trace+0xf0/0x110
-[ 3.551010] [<8007b1ec>] mark_lock+0x33c/0x78c
-[ 3.555413] [<8007bf48>] __lock_acquire+0x2ac/0x1a08
-[ 3.560337] [<8007de60>] lock_acquire+0x64/0x8c
-[ 3.564846] [<804e1570>] _raw_spin_lock_irqsave+0x54/0x78
-[ 3.570186] [<801b618c>] kernfs_notify+0x94/0xac
-[ 3.574770] [<801b7b10>] sysfs_notify+0x74/0xa0
-[ 3.579257] [<801b618c>] kernfs_notify+0x94/0xac
-[ 3.583839] [<801b7b10>] sysfs_notify+0x74/0xa0
-[ 3.588329] [<801b618c>] kernfs_notify+0x94/0xac
-[ 3.592911] [<801b7b10>] sysfs_notify+0x74/0xa0
-[ 3.597401] [<801b618c>] kernfs_notify+0x94/0xac
-[ 3.601983] [<801b7b10>] sysfs_notify+0x74/0xa0
-[ 3.606473] [<801b618c>] kernfs_notify+0x94/0xac
-[ 3.611055] [<801b7b10>] sysfs_notify+0x74/0xa0
-[ 3.615545] [<801b618c>] kernfs_notify+0x94/0xac
-[ 3.620125] [<801b7b10>] sysfs_notify+0x74/0xa0
-[ 3.624619] [<801b618c>] kernfs_notify+0x94/0xac
-[ 3.629197] [<801b7b10>] sysfs_notify+0x74/0xa0
-[ 3.633691] [<801b618c>] kernfs_notify+0x94/0xac
-[ 3.638269] [<801b7b10>] sysfs_notify+0x74/0xa0
-[ 3.642763] [<801b618c>] kernfs_notify+0x94/0xac
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/arch/mips/kernel/process.c
-+++ b/arch/mips/kernel/process.c
-@@ -361,6 +361,8 @@ static inline int is_sp_move_ins(union m
-
- if (ip->i_format.opcode == addiu_op ||
- ip->i_format.opcode == daddiu_op) {
-+ if (ip->i_format.simmediate > 0)
-+ return 0;
- *frame_size = -ip->i_format.simmediate;
- return 1;
- }
+++ /dev/null
-From 852a88f35f4b7e5ebb717fed3c3a3330d5ad4336 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Petr=20=C5=A0tetiar?= <ynezz@true.cz>
-Date: Wed, 10 Apr 2019 16:43:27 +0200
-Subject: [PATCH v2] MIPS: perf: ath79: Fix perfcount IRQ assignment
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Currently it's not possible to use perf on ath79 due to genirq flags
-mismatch happening on static virtual IRQ 13 which is used for
-performance counters hardware IRQ 5.
-
-On TP-Link Archer C7v5:
-
- CPU0
- 2: 0 MIPS 2 ath9k
- 4: 318 MIPS 4 19000000.eth
- 7: 55034 MIPS 7 timer
- 8: 1236 MISC 3 ttyS0
- 12: 0 INTC 1 ehci_hcd:usb1
- 13: 0 gpio-ath79 2 keys
- 14: 0 gpio-ath79 5 keys
- 15: 31 AR724X PCI 1 ath10k_pci
-
- $ perf top
- genirq: Flags mismatch irq 13. 00014c83 (mips_perf_pmu) vs. 00002003 (keys)
-
-On TP-Link Archer C7v4:
-
- CPU0
- 4: 0 MIPS 4 19000000.eth
- 5: 7135 MIPS 5 1a000000.eth
- 7: 98379 MIPS 7 timer
- 8: 30 MISC 3 ttyS0
- 12: 90028 INTC 0 ath9k
- 13: 5520 INTC 1 ehci_hcd:usb1
- 14: 4623 INTC 2 ehci_hcd:usb2
- 15: 32844 AR724X PCI 1 ath10k_pci
- 16: 0 gpio-ath79 16 keys
- 23: 0 gpio-ath79 23 keys
-
- $ perf top
- genirq: Flags mismatch irq 13. 00014c80 (mips_perf_pmu) vs. 00000080 (ehci_hcd:usb1)
-
-This problem is happening, because currently statically assigned virtual
-IRQ 13 for performance counters is not claimed during the initialization
-of MIPS PMU during the bootup, so the IRQ subsystem doesn't know, that
-this interrupt isn't available for further use.
-
-So this patch fixes the issue by simply booking hardware IRQ 5 for MIPS PMU.
-
-Tested-by: Kevin 'ldir' Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
-Signed-off-by: Petr Štetiar <ynezz@true.cz>
----
-
-Changes since v1:
-
- I've incorporated two comments which I've received on IRC from blogic and
- I've also reworded the commit message to match the changes in v2 of this
- patch.
-
- * use actual hardware perfcount IRQ 5 instead of the virtual IRQ 13
- * dropped the CONFIG_PERF_EVENTS ifdef around irq_create_mapping
-
- arch/mips/ath79/setup.c | 6 ------
- drivers/irqchip/irq-ath79-misc.c | 11 +++++++++++
- 2 files changed, 11 insertions(+), 6 deletions(-)
-
---- a/arch/mips/ath79/setup.c
-+++ b/arch/mips/ath79/setup.c
-@@ -211,12 +211,6 @@ const char *get_system_type(void)
- return ath79_sys_type;
- }
-
--int get_c0_perfcount_int(void)
--{
-- return ATH79_MISC_IRQ(5);
--}
--EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
--
- unsigned int get_c0_compare_int(void)
- {
- return CP0_LEGACY_COMPARE_IRQ;
---- a/drivers/irqchip/irq-ath79-misc.c
-+++ b/drivers/irqchip/irq-ath79-misc.c
-@@ -22,6 +22,15 @@
- #define AR71XX_RESET_REG_MISC_INT_ENABLE 4
-
- #define ATH79_MISC_IRQ_COUNT 32
-+#define ATH79_MISC_PERF_IRQ 5
-+
-+static int ath79_perfcount_irq;
-+
-+int get_c0_perfcount_int(void)
-+{
-+ return ath79_perfcount_irq;
-+}
-+EXPORT_SYMBOL_GPL(get_c0_perfcount_int);
-
- static void ath79_misc_irq_handler(struct irq_desc *desc)
- {
-@@ -113,6 +122,8 @@ static void __init ath79_misc_intc_domai
- {
- void __iomem *base = domain->host_data;
-
-+ ath79_perfcount_irq = irq_create_mapping(domain, ATH79_MISC_PERF_IRQ);
-+
- /* Disable and clear all interrupts */
- __raw_writel(0, base + AR71XX_RESET_REG_MISC_INT_ENABLE);
- __raw_writel(0, base + AR71XX_RESET_REG_MISC_INT_STATUS);
+++ /dev/null
-From: Florian Fainelli <florian@openwrt.org>
-Subject: USB: EHCI: add ignore_oc flag to disable overcurrent checking
-
-This patch adds an ignore_oc flag which can be set by EHCI controller
-not supporting or wanting to disable overcurrent checking. The EHCI
-platform data in include/linux/usb/ehci_pdriver.h is also augmented to
-take advantage of this new flag.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- drivers/usb/host/ehci-hcd.c | 2 +-
- drivers/usb/host/ehci-hub.c | 4 ++--
- drivers/usb/host/ehci-platform.c | 1 +
- drivers/usb/host/ehci.h | 1 +
- include/linux/usb/ehci_pdriver.h | 1 +
- 5 files changed, 6 insertions(+), 3 deletions(-)
-
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -638,7 +638,7 @@ static int ehci_run (struct usb_hcd *hcd
- "USB %x.%x started, EHCI %x.%02x%s\n",
- ((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
- temp >> 8, temp & 0xff,
-- ignore_oc ? ", overcurrent ignored" : "");
-+ (ignore_oc || ehci->ignore_oc) ? ", overcurrent ignored" : "");
-
- ehci_writel(ehci, INTR_MASK,
- &ehci->regs->intr_enable); /* Turn On Interrupts */
---- a/drivers/usb/host/ehci-hub.c
-+++ b/drivers/usb/host/ehci-hub.c
-@@ -641,7 +641,7 @@ ehci_hub_status_data (struct usb_hcd *hc
- * always set, seem to clear PORT_OCC and PORT_CSC when writing to
- * PORT_POWER; that's surprising, but maybe within-spec.
- */
-- if (!ignore_oc)
-+ if (!ignore_oc && !ehci->ignore_oc)
- mask = PORT_CSC | PORT_PEC | PORT_OCC;
- else
- mask = PORT_CSC | PORT_PEC;
-@@ -1011,7 +1011,7 @@ int ehci_hub_control(
- if (temp & PORT_PEC)
- status |= USB_PORT_STAT_C_ENABLE << 16;
-
-- if ((temp & PORT_OCC) && !ignore_oc){
-+ if ((temp & PORT_OCC) && (!ignore_oc && !ehci->ignore_oc)){
- status |= USB_PORT_STAT_C_OVERCURRENT << 16;
-
- /*
---- a/drivers/usb/host/ehci-platform.c
-+++ b/drivers/usb/host/ehci-platform.c
-@@ -321,6 +321,8 @@ static int ehci_platform_probe(struct pl
- hcd->has_tt = 1;
- if (pdata->reset_on_resume)
- priv->reset_on_resume = true;
-+ if (pdata->ignore_oc)
-+ ehci->ignore_oc = 1;
-
- #ifndef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
- if (ehci->big_endian_mmio) {
---- a/drivers/usb/host/ehci.h
-+++ b/drivers/usb/host/ehci.h
-@@ -218,6 +218,7 @@ struct ehci_hcd { /* one per controlle
- unsigned frame_index_bug:1; /* MosChip (AKA NetMos) */
- unsigned need_oc_pp_cycle:1; /* MPC834X port power */
- unsigned imx28_write_fix:1; /* For Freescale i.MX28 */
-+ unsigned ignore_oc:1;
-
- /* required for usb32 quirk */
- #define OHCI_CTRL_HCFS (3 << 6)
---- a/include/linux/usb/ehci_pdriver.h
-+++ b/include/linux/usb/ehci_pdriver.h
-@@ -50,6 +50,7 @@ struct usb_ehci_pdata {
- unsigned no_io_watchdog:1;
- unsigned reset_on_resume:1;
- unsigned dma_mask_64:1;
-+ unsigned ignore_oc:1;
-
- /* Turn on all power and clocks */
- int (*power_on)(struct platform_device *pdev);
+++ /dev/null
-From: Tobias Wolf <dev-NTEO@vplace.de>
-Subject: mm: Fix alloc_node_mem_map with ARCH_PFN_OFFSET calculation
-
-An rt288x (ralink) based router (Belkin F5D8235 v1) does not boot with any
-kernel beyond version 4.3 resulting in:
-
-BUG: Bad page state in process swapper pfn:086ac
-
-bisect resulted in:
-
-a1c34a3bf00af2cede839879502e12dc68491ad5 is the first bad commit
-commit a1c34a3bf00af2cede839879502e12dc68491ad5
-Author: Laura Abbott <laura@labbott.name>
-Date: Thu Nov 5 18:48:46 2015 -0800
-
- mm: Don't offset memmap for flatmem
-
- Srinivas Kandagatla reported bad page messages when trying to remove the
- bottom 2MB on an ARM based IFC6410 board
-
- BUG: Bad page state in process swapper pfn:fffa8
- page:ef7fb500 count:0 mapcount:0 mapping: (null) index:0x0
- flags: 0x96640253(locked|error|dirty|active|arch_1|reclaim|mlocked)
- page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
- bad because of flags:
- flags: 0x200041(locked|active|mlocked)
- Modules linked in:
- CPU: 0 PID: 0 Comm: swapper Not tainted 3.19.0-rc3-00007-g412f9ba-dirty
-#816
- Hardware name: Qualcomm (Flattened Device Tree)
- unwind_backtrace
- show_stack
- dump_stack
- bad_page
- free_pages_prepare
- free_hot_cold_page
- __free_pages
- free_highmem_page
- mem_init
- start_kernel
- Disabling lock debugging due to kernel taint
- [...]
-:040000 040000 2de013c372345fd471cd58f0553c9b38b0ef1cc4
-0a8156f848733dfa21e16c196dfb6c0a76290709 M mm
-
-This fix for ARM does not account ARCH_PFN_OFFSET for mem_map as later used by
-page_to_pfn anymore.
-
-The following output was generated with two hacked in printk statements:
-
-printk("before %p vs. %p or %p\n", mem_map, mem_map - offset, mem_map -
-(pgdat->node_start_pfn - ARCH_PFN_OFFSET));
- if (page_to_pfn(mem_map) != pgdat->node_start_pfn)
- mem_map -= offset + (pgdat->node_start_pfn - ARCH_PFN_OFFSET);
-printk("after %p\n", mem_map);
-
-Output:
-
-[ 0.000000] before 8861b280 vs. 8861b280 or 8851b280
-[ 0.000000] after 8851b280
-
-As seen in the first line mem_map with subtraction of offset does not equal the
-mem_map after subtraction of ARCH_PFN_OFFSET.
-
-After adding the offset of ARCH_PFN_OFFSET as well to mem_map as the
-previously calculated offset is zero for the named platform it is able to boot
-4.4 and 4.9-rc7 again.
-
-Signed-off-by: Tobias Wolf <dev-NTEO@vplace.de>
----
-
---- a/mm/page_alloc.c
-+++ b/mm/page_alloc.c
-@@ -6396,7 +6396,7 @@ static void __ref alloc_node_mem_map(str
- mem_map = NODE_DATA(0)->node_mem_map;
- #if defined(CONFIG_HAVE_MEMBLOCK_NODE_MAP) || defined(CONFIG_FLATMEM)
- if (page_to_pfn(mem_map) != pgdat->node_start_pfn)
-- mem_map -= offset;
-+ mem_map -= offset + (pgdat->node_start_pfn - ARCH_PFN_OFFSET);
- #endif /* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
- }
- #endif
+++ /dev/null
-From: Giuseppe Lippolis <giu.lippolis@gmail.com>
-Subject: Add the linux,spidev compatible in spidev Several device in ramips have this binding in the dts
-
-Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
----
- drivers/spi/spidev.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/spi/spidev.c
-+++ b/drivers/spi/spidev.c
-@@ -672,6 +672,7 @@ static const struct of_device_id spidev_
- { .compatible = "lineartechnology,ltc2488" },
- { .compatible = "ge,achc" },
- { .compatible = "semtech,sx1301" },
-+ { .compatible = "siliconlabs,si3210" },
- {},
- };
- MODULE_DEVICE_TABLE(of, spidev_dt_ids);
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Subject: spi: use gpio_set_value_cansleep for setting chipselect GPIO
-
-Sleeping is safe inside spi_transfer_one_message, and some GPIO chips
-need to sleep for setting values
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/spi/spi.c
-+++ b/drivers/spi/spi.c
-@@ -733,7 +733,7 @@ static void spi_set_cs(struct spi_device
- enable = !enable;
-
- if (gpio_is_valid(spi->cs_gpio)) {
-- gpio_set_value(spi->cs_gpio, !enable);
-+ gpio_set_value_cansleep(spi->cs_gpio, !enable);
- /* Some SPI masters need both GPIO CS & slave_select */
- if ((spi->controller->flags & SPI_MASTER_GPIO_SS) &&
- spi->controller->set_cs)
+++ /dev/null
-From 0f76408d8c1cb0979f4286dd23912e6e59784b35 Mon Sep 17 00:00:00 2001
-From: DENG Qingfang <dqfext@gmail.com>
-Date: Thu, 19 Sep 2019 11:42:55 +0200
-Subject: [PATCH] spi: spi-gpio: fix crash when num-chipselects is 0
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-If an spi-gpio was specified with num-chipselects = <0> in dts, kernel will crash:
-
-Unable to handle kernel paging request at virtual address 32697073
-pgd = (ptrval)
-[32697073] *pgd=00000000
-Internal error: Oops: 5 [# 1] SMP ARM
-Modules linked in:
-CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.19.72 #0
-Hardware name: Generic DT based system
-PC is at validate_desc+0x28/0x80
-LR is at gpiod_direction_output+0x14/0x128
-...
-[<c0544db4>] (validate_desc) from [<c0545228>] (gpiod_direction_output+0x14/0x128)
-[<c0545228>] (gpiod_direction_output) from [<c05fa714>] (spi_gpio_setup+0x58/0x64)
-[<c05fa714>] (spi_gpio_setup) from [<c05f7258>] (spi_setup+0x12c/0x148)
-[<c05f7258>] (spi_setup) from [<c05f7330>] (spi_add_device+0xbc/0x12c)
-[<c05f7330>] (spi_add_device) from [<c05f7f74>] (spi_register_controller+0x838/0x924)
-[<c05f7f74>] (spi_register_controller) from [<c05fa494>] (spi_bitbang_start+0x108/0x120)
-[<c05fa494>] (spi_bitbang_start) from [<c05faa34>] (spi_gpio_probe+0x314/0x338)
-[<c05faa34>] (spi_gpio_probe) from [<c05a844c>] (platform_drv_probe+0x34/0x70)
-
-The cause is spi_gpio_setup() did not check if the spi-gpio has chipselect pins
-before setting their direction and results in derefing an invalid pointer.
-
-The bug is spotted in kernel 4.19.72 on OpenWrt, and does not occur in 4.14.
-
-There is a similar fix upstream 249e2632dcd0509b8f8f296f5aabf4d48dfd6da8.
-
-Ref: https://patchwork.kernel.org/patch/11150619/
-Cc: Linus Walleij <linus.walleij@linaro.org>
-Cc: stable@vger.kernel.org
-Signed-off-by: DENG Qingfang <dqfext@gmail.com>
-Signed-off-by: Petr Štetiar <ynezz@true.cz>
----
- drivers/spi/spi-gpio.c | 10 ++++++----
- 1 file changed, 6 insertions(+), 4 deletions(-)
-
---- a/drivers/spi/spi-gpio.c
-+++ b/drivers/spi/spi-gpio.c
-@@ -242,10 +242,12 @@ static int spi_gpio_setup(struct spi_dev
- * The CS GPIOs have already been
- * initialized from the descriptor lookup.
- */
-- cs = spi_gpio->cs_gpios[spi->chip_select];
-- if (!spi->controller_state && cs)
-- status = gpiod_direction_output(cs,
-- !(spi->mode & SPI_CS_HIGH));
-+ if (spi_gpio->has_cs) {
-+ cs = spi_gpio->cs_gpios[spi->chip_select];
-+ if (!spi->controller_state && cs)
-+ status = gpiod_direction_output(cs,
-+ !(spi->mode & SPI_CS_HIGH));
-+ }
-
- if (!status)
- status = spi_bitbang_setup(spi);
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Subject: jffs2: use .rename2 and add RENAME_WHITEOUT support
-
-It is required for renames on overlayfs
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/fs/jffs2/dir.c
-+++ b/fs/jffs2/dir.c
-@@ -752,6 +752,24 @@ static int jffs2_mknod (struct inode *di
- return ret;
- }
-
-+static int jffs2_whiteout (struct inode *old_dir, struct dentry *old_dentry)
-+{
-+ struct dentry *wh;
-+ int err;
-+
-+ wh = d_alloc(old_dentry->d_parent, &old_dentry->d_name);
-+ if (!wh)
-+ return -ENOMEM;
-+
-+ err = jffs2_mknod(old_dir, wh, S_IFCHR | WHITEOUT_MODE,
-+ WHITEOUT_DEV);
-+ if (err)
-+ return err;
-+
-+ d_rehash(wh);
-+ return 0;
-+}
-+
- static int jffs2_rename (struct inode *old_dir_i, struct dentry *old_dentry,
- struct inode *new_dir_i, struct dentry *new_dentry,
- unsigned int flags)
-@@ -762,7 +780,7 @@ static int jffs2_rename (struct inode *o
- uint8_t type;
- uint32_t now;
-
-- if (flags & ~RENAME_NOREPLACE)
-+ if (flags & ~(RENAME_NOREPLACE|RENAME_WHITEOUT))
- return -EINVAL;
-
- /* The VFS will check for us and prevent trying to rename a
-@@ -828,9 +846,14 @@ static int jffs2_rename (struct inode *o
- if (d_is_dir(old_dentry) && !victim_f)
- inc_nlink(new_dir_i);
-
-- /* Unlink the original */
-- ret = jffs2_do_unlink(c, JFFS2_INODE_INFO(old_dir_i),
-- old_dentry->d_name.name, old_dentry->d_name.len, NULL, now);
-+ if (flags & RENAME_WHITEOUT)
-+ /* Replace with whiteout */
-+ ret = jffs2_whiteout(old_dir_i, old_dentry);
-+ else
-+ /* Unlink the original */
-+ ret = jffs2_do_unlink(c, JFFS2_INODE_INFO(old_dir_i),
-+ old_dentry->d_name.name,
-+ old_dentry->d_name.len, NULL, now);
-
- /* We don't touch inode->i_nlink */
-
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Subject: jffs2: add RENAME_EXCHANGE support
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/fs/jffs2/dir.c
-+++ b/fs/jffs2/dir.c
-@@ -777,18 +777,31 @@ static int jffs2_rename (struct inode *o
- int ret;
- struct jffs2_sb_info *c = JFFS2_SB_INFO(old_dir_i->i_sb);
- struct jffs2_inode_info *victim_f = NULL;
-+ struct inode *fst_inode = d_inode(old_dentry);
-+ struct inode *snd_inode = d_inode(new_dentry);
- uint8_t type;
- uint32_t now;
-
-- if (flags & ~(RENAME_NOREPLACE|RENAME_WHITEOUT))
-+ if (flags & ~(RENAME_NOREPLACE|RENAME_WHITEOUT|RENAME_EXCHANGE))
- return -EINVAL;
-
-+ if ((flags & RENAME_EXCHANGE) && (old_dir_i != new_dir_i)) {
-+ if (S_ISDIR(fst_inode->i_mode) && !S_ISDIR(snd_inode->i_mode)) {
-+ inc_nlink(new_dir_i);
-+ drop_nlink(old_dir_i);
-+ }
-+ else if (!S_ISDIR(fst_inode->i_mode) && S_ISDIR(snd_inode->i_mode)) {
-+ drop_nlink(new_dir_i);
-+ inc_nlink(old_dir_i);
-+ }
-+ }
-+
- /* The VFS will check for us and prevent trying to rename a
- * file over a directory and vice versa, but if it's a directory,
- * the VFS can't check whether the victim is empty. The filesystem
- * needs to do that for itself.
- */
-- if (d_really_is_positive(new_dentry)) {
-+ if (d_really_is_positive(new_dentry) && !(flags & RENAME_EXCHANGE)) {
- victim_f = JFFS2_INODE_INFO(d_inode(new_dentry));
- if (d_is_dir(new_dentry)) {
- struct jffs2_full_dirent *fd;
-@@ -823,7 +836,7 @@ static int jffs2_rename (struct inode *o
- if (ret)
- return ret;
-
-- if (victim_f) {
-+ if (victim_f && !(flags & RENAME_EXCHANGE)) {
- /* There was a victim. Kill it off nicely */
- if (d_is_dir(new_dentry))
- clear_nlink(d_inode(new_dentry));
-@@ -849,6 +862,12 @@ static int jffs2_rename (struct inode *o
- if (flags & RENAME_WHITEOUT)
- /* Replace with whiteout */
- ret = jffs2_whiteout(old_dir_i, old_dentry);
-+ else if (flags & RENAME_EXCHANGE)
-+ /* Replace the original */
-+ ret = jffs2_do_link(c, JFFS2_INODE_INFO(old_dir_i),
-+ d_inode(new_dentry)->i_ino, type,
-+ old_dentry->d_name.name, old_dentry->d_name.len,
-+ now);
- else
- /* Unlink the original */
- ret = jffs2_do_unlink(c, JFFS2_INODE_INFO(old_dir_i),
-@@ -880,7 +899,7 @@ static int jffs2_rename (struct inode *o
- return ret;
- }
-
-- if (d_is_dir(old_dentry))
-+ if (d_is_dir(old_dentry) && !(flags & RENAME_EXCHANGE))
- drop_nlink(old_dir_i);
-
- new_dir_i->i_mtime = new_dir_i->i_ctime = old_dir_i->i_mtime = old_dir_i->i_ctime = ITIME(now);
+++ /dev/null
-From: Stephen Hemminger <stephen@networkplumber.org>
-Subject: bridge: allow receiption on disabled port
-
-When an ethernet device is enslaved to a bridge, and the bridge STP
-detects loss of carrier (or operational state down), then normally
-packet receiption is blocked.
-
-This breaks control applications like WPA which maybe expecting to
-receive packets to negotiate to bring link up. The bridge needs to
-block forwarding packets from these disabled ports, but there is no
-hard requirement to not allow local packet delivery.
-
-Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
---- a/net/bridge/br_input.c
-+++ b/net/bridge/br_input.c
-@@ -193,6 +193,9 @@ static void __br_handle_local_finish(str
- /* note: already called with rcu_read_lock */
- static int br_handle_local_finish(struct net *net, struct sock *sk, struct sk_buff *skb)
- {
-+ struct net_bridge_port *p = br_port_get_rcu(skb->dev);
-+
-+ if (p->state != BR_STATE_DISABLED)
- __br_handle_local_finish(skb);
-
- /* return 1 to signal the okfn() was called so it's ok to use the skb */
-@@ -289,6 +292,17 @@ rx_handler_result_t br_handle_frame(stru
-
- forward:
- switch (p->state) {
-+ case BR_STATE_DISABLED:
-+ if (ether_addr_equal(p->br->dev->dev_addr, dest))
-+ skb->pkt_type = PACKET_HOST;
-+
-+ if (NF_HOOK(NFPROTO_BRIDGE, NF_BR_PRE_ROUTING,
-+ dev_net(skb->dev), NULL, skb, skb->dev, NULL,
-+ br_handle_local_finish) == 1) {
-+ return RX_HANDLER_PASS;
-+ }
-+ break;
-+
- case BR_STATE_FORWARDING:
- rhook = rcu_dereference(br_should_route_hook);
- if (rhook) {
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Subject: net: phy: at803x: add support for AT8032
-
-Like AT8030, this PHY needs the GPIO reset workaround
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -62,8 +62,10 @@
-
- #define ATH8030_PHY_ID 0x004dd076
- #define ATH8031_PHY_ID 0x004dd074
-+#define ATH8032_PHY_ID 0x004dd023
- #define ATH8035_PHY_ID 0x004dd072
- #define AT803X_PHY_ID_MASK 0xffffffef
-+#define AT8032_PHY_ID_MASK 0xffffffff
-
- MODULE_DESCRIPTION("Atheros 803x PHY driver");
- MODULE_AUTHOR("Matus Ujhelyi");
-@@ -308,7 +310,7 @@ static void at803x_link_change_notify(st
- struct at803x_priv *priv = phydev->priv;
-
- /*
-- * Conduct a hardware reset for AT8030 every time a link loss is
-+ * Conduct a hardware reset for AT8030/2 every time a link loss is
- * signalled. This is necessary to circumvent a hardware bug that
- * occurs when the cable is unplugged while TX packets are pending
- * in the FIFO. In such cases, the FIFO enters an error mode it
-@@ -414,6 +416,24 @@ static struct phy_driver at803x_driver[]
- .aneg_done = at803x_aneg_done,
- .ack_interrupt = &at803x_ack_interrupt,
- .config_intr = &at803x_config_intr,
-+}, {
-+ /* ATHEROS 8032 */
-+ .phy_id = ATH8032_PHY_ID,
-+ .name = "Atheros 8032 ethernet",
-+ .phy_id_mask = AT8032_PHY_ID_MASK,
-+ .probe = at803x_probe,
-+ .config_init = at803x_config_init,
-+ .link_change_notify = at803x_link_change_notify,
-+ .set_wol = at803x_set_wol,
-+ .get_wol = at803x_get_wol,
-+ .suspend = at803x_suspend,
-+ .resume = at803x_resume,
-+ .features = PHY_BASIC_FEATURES,
-+ .flags = PHY_HAS_INTERRUPT,
-+ .config_aneg = genphy_config_aneg,
-+ .read_status = genphy_read_status,
-+ .ack_interrupt = at803x_ack_interrupt,
-+ .config_intr = at803x_config_intr,
- } };
-
- module_phy_driver(at803x_driver);
-@@ -421,6 +441,7 @@ module_phy_driver(at803x_driver);
- static struct mdio_device_id __maybe_unused atheros_tbl[] = {
- { ATH8030_PHY_ID, AT803X_PHY_ID_MASK },
- { ATH8031_PHY_ID, AT803X_PHY_ID_MASK },
-+ { ATH8032_PHY_ID, AT8032_PHY_ID_MASK },
- { ATH8035_PHY_ID, AT803X_PHY_ID_MASK },
- { }
- };
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Subject: Upgrade to Linux 2.6.19
-
-- Includes large parts of the patch from #1021 by dpalffy
-- Includes RB532 NAND driver changes by n0-1
-
-[john@phrozen.org: feix will add this to his upstream queue]
-
-lede-commit: bff468813f78f81e36ebb2a3f4354de7365e640f
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- Makefile | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/Makefile
-+++ b/Makefile
-@@ -653,9 +653,9 @@ KBUILD_CFLAGS += $(call cc-disable-warni
- KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member)
-
- ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
--KBUILD_CFLAGS += -Os
-+KBUILD_CFLAGS += -Os $(EXTRA_OPTIMIZATION)
- else
--KBUILD_CFLAGS += -O2
-+KBUILD_CFLAGS += -O2 -fno-reorder-blocks -fno-tree-ch $(EXTRA_OPTIMIZATION)
- endif
-
- # Tell gcc to never replace conditional load with a non-conditional one
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: add a config option for keeping the kallsyms table uncompressed, saving ~9kb kernel size after lzma on ar71xx
-
-[john@phrozen.org: added to my upstream queue 30.12.2016]
-lede-commit: e0e3509b5ce2ccf93d4d67ea907613f5f7ec2eed
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- init/Kconfig | 11 +++++++++++
- kernel/kallsyms.c | 8 ++++++++
- scripts/kallsyms.c | 12 ++++++++++++
- scripts/link-vmlinux.sh | 4 ++++
- 4 files changed, 35 insertions(+)
-
---- a/init/Kconfig
-+++ b/init/Kconfig
-@@ -1149,6 +1149,17 @@ config SYSCTL_ARCH_UNALIGN_ALLOW
- the unaligned access emulation.
- see arch/parisc/kernel/unaligned.c for reference
-
-+config KALLSYMS_UNCOMPRESSED
-+ bool "Keep kallsyms uncompressed"
-+ depends on KALLSYMS
-+ help
-+ Normally kallsyms contains compressed symbols (using a token table),
-+ reducing the uncompressed kernel image size. Keeping the symbol table
-+ uncompressed significantly improves the size of this part in compressed
-+ kernel images.
-+
-+ Say N unless you need compressed kernel images to be small.
-+
- config HAVE_PCSPKR_PLATFORM
- bool
-
---- a/kernel/kallsyms.c
-+++ b/kernel/kallsyms.c
-@@ -74,6 +74,11 @@ static unsigned int kallsyms_expand_symb
- * For every byte on the compressed symbol data, copy the table
- * entry for that byte.
- */
-+#ifdef CONFIG_KALLSYMS_UNCOMPRESSED
-+ memcpy(result, data + 1, len - 1);
-+ result += len - 1;
-+ len = 0;
-+#endif
- while (len) {
- tptr = &kallsyms_token_table[kallsyms_token_index[*data]];
- data++;
-@@ -106,6 +111,9 @@ tail:
- */
- static char kallsyms_get_symbol_type(unsigned int off)
- {
-+#ifdef CONFIG_KALLSYMS_UNCOMPRESSED
-+ return kallsyms_names[off + 1];
-+#endif
- /*
- * Get just the first code, look it up in the token table,
- * and return the first char from this token.
---- a/scripts/kallsyms.c
-+++ b/scripts/kallsyms.c
-@@ -61,6 +61,7 @@ static struct addr_range percpu_range =
- static struct sym_entry *table;
- static unsigned int table_size, table_cnt;
- static int all_symbols = 0;
-+static int uncompressed = 0;
- static int absolute_percpu = 0;
- static int base_relative = 0;
-
-@@ -442,6 +443,9 @@ static void write_src(void)
-
- free(markers);
-
-+ if (uncompressed)
-+ return;
-+
- output_label("kallsyms_token_table");
- off = 0;
- for (i = 0; i < 256; i++) {
-@@ -502,6 +506,9 @@ static void *find_token(unsigned char *s
- {
- int i;
-
-+ if (uncompressed)
-+ return NULL;
-+
- for (i = 0; i < len - 1; i++) {
- if (str[i] == token[0] && str[i+1] == token[1])
- return &str[i];
-@@ -574,6 +581,9 @@ static void optimize_result(void)
- {
- int i, best;
-
-+ if (uncompressed)
-+ return;
-+
- /* using the '\0' symbol last allows compress_symbols to use standard
- * fast string functions */
- for (i = 255; i >= 0; i--) {
-@@ -756,6 +766,8 @@ int main(int argc, char **argv)
- absolute_percpu = 1;
- else if (strcmp(argv[i], "--base-relative") == 0)
- base_relative = 1;
-+ else if (strcmp(argv[i], "--uncompressed") == 0)
-+ uncompressed = 1;
- else
- usage();
- }
---- a/scripts/link-vmlinux.sh
-+++ b/scripts/link-vmlinux.sh
-@@ -133,6 +133,10 @@ kallsyms()
- kallsymopt="${kallsymopt} --base-relative"
- fi
-
-+ if [ -n "${CONFIG_KALLSYMS_UNCOMPRESSED}" ]; then
-+ kallsymopt="${kallsymopt} --uncompressed"
-+ fi
-+
- local aflags="${KBUILD_AFLAGS} ${KBUILD_AFLAGS_KERNEL} \
- ${NOSTDINC_FLAGS} ${LINUXINCLUDE} ${KBUILD_CPPFLAGS}"
-
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: when KALLSYMS is disabled, print module address + size for matching backtrace entries
-
-[john@phrozen.org: felix will add this to his upstream queue]
-
-lede-commit 53827cdc824556cda910b23ce5030c363b8f1461
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- lib/vsprintf.c | 15 +++++++++++----
- 1 file changed, 11 insertions(+), 4 deletions(-)
-
---- a/lib/vsprintf.c
-+++ b/lib/vsprintf.c
-@@ -681,8 +681,10 @@ char *symbol_string(char *buf, char *end
- struct printf_spec spec, const char *fmt)
- {
- unsigned long value;
--#ifdef CONFIG_KALLSYMS
- char sym[KSYM_SYMBOL_LEN];
-+#ifndef CONFIG_KALLSYMS
-+ struct module *mod;
-+ int len;
- #endif
-
- if (fmt[1] == 'R')
-@@ -696,11 +698,16 @@ char *symbol_string(char *buf, char *end
- sprint_symbol(sym, value);
- else
- sprint_symbol_no_offset(sym, value);
--
-- return string(buf, end, sym, spec);
- #else
-- return special_hex_number(buf, end, value, sizeof(void *));
-+ len = snprintf(sym, sizeof(sym), "0x%lx", value);
-+
-+ mod = __module_address(value);
-+ if (mod)
-+ snprintf(sym + len, sizeof(sym) - len, " [%s@%p+0x%x]",
-+ mod->name, mod->core_layout.base,
-+ mod->core_layout.size);
- #endif
-+ return string(buf, end, sym, spec);
- }
-
- static const struct printf_spec default_str_spec = {
+++ /dev/null
---- a/arch/arm/kernel/atags.h
-+++ b/arch/arm/kernel/atags.h
-@@ -5,7 +5,7 @@ void convert_to_tag_list(struct tag *tag
- const struct machine_desc *setup_machine_tags(phys_addr_t __atags_pointer,
- unsigned int machine_nr);
- #else
--static inline const struct machine_desc *
-+static inline const struct machine_desc * __init __noreturn
- setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr)
- {
- early_print("no ATAGS support: can't continue\n");
---- a/arch/arm64/include/asm/cpufeature.h
-+++ b/arch/arm64/include/asm/cpufeature.h
-@@ -366,7 +366,7 @@ static inline bool cpu_have_feature(unsi
- }
-
- /* System capability check for constant caps */
--static inline bool __cpus_have_const_cap(int num)
-+static __always_inline bool __cpus_have_const_cap(int num)
- {
- if (num >= ARM64_NCAPS)
- return false;
-@@ -380,7 +380,7 @@ static inline bool cpus_have_cap(unsigne
- return test_bit(num, cpu_hwcaps);
- }
-
--static inline bool cpus_have_const_cap(int num)
-+static __always_inline bool cpus_have_const_cap(int num)
- {
- if (static_branch_likely(&arm64_const_caps_ready))
- return __cpus_have_const_cap(num);
---- a/arch/mips/include/asm/bitops.h
-+++ b/arch/mips/include/asm/bitops.h
-@@ -463,7 +463,7 @@ static inline void __clear_bit_unlock(un
- * Return the bit position (0..63) of the most significant 1 bit in a word
- * Returns -1 if no 1 bit exists
- */
--static inline unsigned long __fls(unsigned long word)
-+static __always_inline unsigned long __fls(unsigned long word)
- {
- int num;
-
-@@ -529,7 +529,7 @@ static inline unsigned long __fls(unsign
- * Returns 0..SZLONG-1
- * Undefined if no bit exists, so code should check against 0 first.
- */
--static inline unsigned long __ffs(unsigned long word)
-+static __always_inline unsigned long __ffs(unsigned long word)
- {
- return __fls(word & -word);
- }
---- a/arch/mips/kernel/cpu-bugs64.c
-+++ b/arch/mips/kernel/cpu-bugs64.c
-@@ -42,8 +42,8 @@ static inline void align_mod(const int a
- : GCC_IMM_ASM() (align), GCC_IMM_ASM() (mod));
- }
-
--static inline void mult_sh_align_mod(long *v1, long *v2, long *w,
-- const int align, const int mod)
-+static __always_inline void mult_sh_align_mod(long *v1, long *v2, long *w,
-+ const int align, const int mod)
- {
- unsigned long flags;
- int m1, m2;
---- a/arch/powerpc/kernel/prom_init.c
-+++ b/arch/powerpc/kernel/prom_init.c
-@@ -498,14 +498,14 @@ static int __init prom_next_node(phandle
- }
- }
-
--static inline int prom_getprop(phandle node, const char *pname,
-- void *value, size_t valuelen)
-+static inline int __init prom_getprop(phandle node, const char *pname,
-+ void *value, size_t valuelen)
- {
- return call_prom("getprop", 4, 1, node, ADDR(pname),
- (u32)(unsigned long) value, (u32) valuelen);
- }
-
--static inline int prom_getproplen(phandle node, const char *pname)
-+static inline int __init prom_getproplen(phandle node, const char *pname)
- {
- return call_prom("getproplen", 2, 1, node, ADDR(pname));
- }
---- a/arch/powerpc/mm/tlb-radix.c
-+++ b/arch/powerpc/mm/tlb-radix.c
-@@ -90,8 +90,8 @@ void radix__tlbiel_all(unsigned int acti
- asm volatile(PPC_INVALIDATE_ERAT "; isync" : : :"memory");
- }
-
--static inline void __tlbiel_pid(unsigned long pid, int set,
-- unsigned long ric)
-+static __always_inline void __tlbiel_pid(unsigned long pid, int set,
-+ unsigned long ric)
- {
- unsigned long rb,rs,prs,r;
-
-@@ -106,7 +106,7 @@ static inline void __tlbiel_pid(unsigned
- trace_tlbie(0, 1, rb, rs, ric, prs, r);
- }
-
--static inline void __tlbie_pid(unsigned long pid, unsigned long ric)
-+static __always_inline void __tlbie_pid(unsigned long pid, unsigned long ric)
- {
- unsigned long rb,rs,prs,r;
-
-@@ -136,7 +136,7 @@ static inline void __tlbiel_lpid(unsigne
- trace_tlbie(lpid, 1, rb, rs, ric, prs, r);
- }
-
--static inline void __tlbie_lpid(unsigned long lpid, unsigned long ric)
-+static __always_inline void __tlbie_lpid(unsigned long lpid, unsigned long ric)
- {
- unsigned long rb,rs,prs,r;
-
-@@ -300,7 +300,7 @@ static inline void fixup_tlbie_lpid(unsi
- /*
- * We use 128 set in radix mode and 256 set in hpt mode.
- */
--static inline void _tlbiel_pid(unsigned long pid, unsigned long ric)
-+static __always_inline void _tlbiel_pid(unsigned long pid, unsigned long ric)
- {
- int set;
-
-@@ -983,7 +983,7 @@ void radix__tlb_flush(struct mmu_gather
- tlb->need_flush_all = 0;
- }
-
--static inline void __radix__flush_tlb_range_psize(struct mm_struct *mm,
-+static __always_inline void __radix__flush_tlb_range_psize(struct mm_struct *mm,
- unsigned long start, unsigned long end,
- int psize, bool also_pwc)
- {
---- a/arch/s390/include/asm/cpacf.h
-+++ b/arch/s390/include/asm/cpacf.h
-@@ -202,7 +202,7 @@ static inline int __cpacf_check_opcode(u
- }
- }
-
--static inline int cpacf_query(unsigned int opcode, cpacf_mask_t *mask)
-+static __always_inline int cpacf_query(unsigned int opcode, cpacf_mask_t *mask)
- {
- if (__cpacf_check_opcode(opcode)) {
- __cpacf_query(opcode, mask);
---- a/arch/x86/Kconfig.debug
-+++ b/arch/x86/Kconfig.debug
-@@ -276,20 +276,6 @@ config CPA_DEBUG
- ---help---
- Do change_page_attr() self-tests every 30 seconds.
-
--config OPTIMIZE_INLINING
-- bool "Allow gcc to uninline functions marked 'inline'"
-- ---help---
-- This option determines if the kernel forces gcc to inline the functions
-- developers have marked 'inline'. Doing so takes away freedom from gcc to
-- do what it thinks is best, which is desirable for the gcc 3.x series of
-- compilers. The gcc 4.x series have a rewritten inlining algorithm and
-- enabling this option will generate a smaller kernel there. Hopefully
-- this algorithm is so good that allowing gcc 4.x and above to make the
-- decision will become the default in the future. Until then this option
-- is there to test gcc for this.
--
-- If unsure, say N.
--
- config DEBUG_ENTRY
- bool "Debug low-level entry code"
- depends on DEBUG_KERNEL
---- a/drivers/mtd/nand/raw/vf610_nfc.c
-+++ b/drivers/mtd/nand/raw/vf610_nfc.c
-@@ -373,7 +373,7 @@ static int vf610_nfc_cmd(struct nand_chi
- {
- const struct nand_op_instr *instr;
- struct vf610_nfc *nfc = chip_to_nfc(chip);
-- int op_id = -1, trfr_sz = 0, offset;
-+ int op_id = -1, trfr_sz = 0, offset = 0;
- u32 col = 0, row = 0, cmd1 = 0, cmd2 = 0, code = 0;
- bool force8bit = false;
-
---- a/lib/Kconfig.debug
-+++ b/lib/Kconfig.debug
-@@ -309,6 +309,20 @@ config HEADERS_CHECK
- exported to $(INSTALL_HDR_PATH) (usually 'usr/include' in
- your build tree), to make sure they're suitable.
-
-+config OPTIMIZE_INLINING
-+ bool "Allow compiler to uninline functions marked 'inline'"
-+ help
-+ This option determines if the kernel forces gcc to inline the functions
-+ developers have marked 'inline'. Doing so takes away freedom from gcc to
-+ do what it thinks is best, which is desirable for the gcc 3.x series of
-+ compilers. The gcc 4.x series have a rewritten inlining algorithm and
-+ enabling this option will generate a smaller kernel there. Hopefully
-+ this algorithm is so good that allowing gcc 4.x and above to make the
-+ decision will become the default in the future. Until then this option
-+ is there to test gcc for this.
-+
-+ If unsure, say N.
-+
- config DEBUG_SECTION_MISMATCH
- bool "Enable full Section mismatch analysis"
- help
---- a/arch/x86/Kconfig
-+++ b/arch/x86/Kconfig
-@@ -306,9 +306,6 @@ config ZONE_DMA32
- config AUDIT_ARCH
- def_bool y if X86_64
-
--config ARCH_SUPPORTS_OPTIMIZED_INLINING
-- def_bool y
--
- config ARCH_SUPPORTS_DEBUG_PAGEALLOC
- def_bool y
-
---- a/include/linux/compiler_types.h
-+++ b/include/linux/compiler_types.h
-@@ -268,8 +268,7 @@ struct ftrace_likely_data {
- * of extern inline functions at link time.
- * A lot of inline functions can cause havoc with function tracing.
- */
--#if !defined(CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING) || \
-- !defined(CONFIG_OPTIMIZE_INLINING)
-+#if !defined(CONFIG_OPTIMIZE_INLINING)
- #define inline \
- inline __attribute__((always_inline, unused)) notrace __gnu_inline
- #else
+++ /dev/null
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: usr: sanitize deps_initramfs list
-
-If any filename in the intramfs dependency
-list contains a colon, that causes a kernel
-build error like this:
-
-/devel/openwrt/build_dir/linux-ar71xx_generic/linux-3.6.6/usr/Makefile:58: *** multiple target patterns. Stop.
-make[5]: *** [usr] Error 2
-
-Fix it by removing such filenames from the
-deps_initramfs list.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- usr/Makefile | 8 +++++---
- 1 file changed, 5 insertions(+), 3 deletions(-)
-
---- a/usr/Makefile
-+++ b/usr/Makefile
-@@ -42,20 +42,22 @@ ifneq ($(wildcard $(obj)/$(datafile_d_y)
- include $(obj)/$(datafile_d_y)
- endif
-
-+deps_initramfs_sane := $(foreach v,$(deps_initramfs),$(if $(findstring :,$(v)),,$(v)))
-+
- quiet_cmd_initfs = GEN $@
- cmd_initfs = $(initramfs) -o $@ $(ramfs-args) $(ramfs-input)
-
- targets := $(datafile_y)
-
- # do not try to update files included in initramfs
--$(deps_initramfs): ;
-+$(deps_initramfs_sane): ;
-
--$(deps_initramfs): klibcdirs
-+$(deps_initramfs_sane): klibcdirs
- # We rebuild initramfs_data.cpio if:
- # 1) Any included file is newer then initramfs_data.cpio
- # 2) There are changes in which files are included (added or deleted)
- # 3) If gen_init_cpio are newer than initramfs_data.cpio
- # 4) arguments to gen_initramfs.sh changes
--$(obj)/$(datafile_y): $(obj)/gen_init_cpio $(deps_initramfs) klibcdirs
-+$(obj)/$(datafile_y): $(obj)/gen_init_cpio $(deps_initramfs_sane) klibcdirs
- $(Q)$(initramfs) -l $(ramfs-input) > $(obj)/$(datafile_d_y)
- $(call if_changed,initfs)
+++ /dev/null
-From: Imre Kaloz <kaloz@openwrt.org>
-Subject: [PATCH] hack: net: wireless: make the wl12xx glue code available with
- compat-wireless, too
-
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
----
- drivers/net/wireless/ti/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/wireless/ti/Kconfig
-+++ b/drivers/net/wireless/ti/Kconfig
-@@ -19,7 +19,7 @@ source "drivers/net/wireless/ti/wlcore/K
-
- config WILINK_PLATFORM_DATA
- bool "TI WiLink platform data"
-- depends on WLCORE_SDIO || WL1251_SDIO
-+ depends on WLCORE_SDIO || WL1251_SDIO || ARCH_OMAP2PLUS
- default y
- ---help---
- Small platform data bit needed to pass data to the sdio modules.
+++ /dev/null
-From c2deb5ef01a0ef09088832744cbace9e239a6ee0 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Thibaut=20VAR=C3=88NE?= <hacks@slashdirt.org>
-Date: Sat, 28 Mar 2020 12:11:50 +0100
-Subject: [PATCH] generic: platform/mikrotik build bits (4.19)
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This patch adds platform/mikrotik kernel build bits
-
-Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
----
- drivers/platform/Kconfig | 2 ++
- drivers/platform/Makefile | 1 +
- 2 files changed, 3 insertions(+)
-
---- a/drivers/platform/Kconfig
-+++ b/drivers/platform/Kconfig
-@@ -10,3 +10,5 @@ source "drivers/platform/goldfish/Kconfi
- source "drivers/platform/chrome/Kconfig"
-
- source "drivers/platform/mellanox/Kconfig"
-+
-+source "drivers/platform/mikrotik/Kconfig"
---- a/drivers/platform/Makefile
-+++ b/drivers/platform/Makefile
-@@ -9,3 +9,4 @@ obj-$(CONFIG_MIPS) += mips/
- obj-$(CONFIG_OLPC) += olpc/
- obj-$(CONFIG_GOLDFISH) += goldfish/
- obj-$(CONFIG_CHROME_PLATFORMS) += chrome/
-+obj-$(CONFIG_MIKROTIK) += mikrotik/
+++ /dev/null
-From: Mark Miller <mark@mirell.org>
-Subject: mips: expose CONFIG_BOOT_RAW
-
-This exposes the CONFIG_BOOT_RAW symbol in Kconfig. This is needed on
-certain Broadcom chipsets running CFE in order to load the kernel.
-
-Signed-off-by: Mark Miller <mark@mirell.org>
-Acked-by: Rob Landley <rob@landley.net>
----
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -1063,9 +1063,6 @@ config FW_ARC
- config ARCH_MAY_HAVE_PC_FDC
- bool
-
--config BOOT_RAW
-- bool
--
- config CEVT_BCM1480
- bool
-
-@@ -2969,6 +2966,18 @@ choice
- bool "Extend builtin kernel arguments with bootloader arguments"
- endchoice
-
-+config BOOT_RAW
-+ bool "Enable the kernel to be executed from the load address"
-+ default n
-+ help
-+ Allow the kernel to be executed from the load address for
-+ bootloaders which cannot read the ELF format. This places
-+ a jump to start_kernel at the load address.
-+
-+ If unsure, say N.
-+
-+
-+
- endmenu
-
- config LOCKDEP_SUPPORT
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Subject: mips: use -mno-branch-likely for kernel and userspace
-
-saves ~11k kernel size after lzma and ~12k squashfs size in the
-
-lede-commit: 41a039f46450ffae9483d6216422098669da2900
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- arch/mips/Makefile | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -91,7 +91,7 @@ all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlin
- # machines may also. Since BFD is incredibly buggy with respect to
- # crossformat linking we rely on the elf2ecoff tool for format conversion.
- #
--cflags-y += -G 0 -mno-abicalls -fno-pic -pipe
-+cflags-y += -G 0 -mno-abicalls -fno-pic -pipe -mno-branch-likely
- cflags-y += -msoft-float
- LDFLAGS_vmlinux += -G 0 -static -n -nostdlib
- KBUILD_AFLAGS_MODULE += -mlong-calls
+++ /dev/null
-From: Manuel Lauss <manuel.lauss@gmail.com>
-Subject: [RFC PATCH v4 2/2] MIPS: make FPU emulator optional
-
-This small patch makes the MIPS FPU emulator optional. The kernel
-kills float-users on systems without a hardware FPU by sending a SIGILL.
-
-Disabling the emulator shrinks vmlinux by about 54kBytes (32bit,
-optimizing for size).
-
-Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
----
-v4: rediffed because of patch 1/2, should now work with micromips as well
-v3: updated patch description with size savings.
-v2: incorporated changes suggested by Jonas Gorski
- force the fpu emulator on for micromips: relocating the parts
- of the mmips code in the emulator to other areas would be a
- much larger change; I went the cheap route instead with this.
-
- arch/mips/Kbuild | 2 +-
- arch/mips/Kconfig | 14 ++++++++++++++
- arch/mips/include/asm/fpu.h | 5 +++--
- arch/mips/include/asm/fpu_emulator.h | 15 +++++++++++++++
- 4 files changed, 33 insertions(+), 3 deletions(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -2893,6 +2893,20 @@ config MIPS_O32_FP64_SUPPORT
-
- If unsure, say N.
-
-+config MIPS_FPU_EMULATOR
-+ bool "MIPS FPU Emulator"
-+ default y
-+ help
-+ This option lets you disable the built-in MIPS FPU (Coprocessor 1)
-+ emulator, which handles floating-point instructions on processors
-+ without a hardware FPU. It is generally a good idea to keep the
-+ emulator built-in, unless you are perfectly sure you have a
-+ complete soft-float environment. With the emulator disabled, all
-+ users of float operations will be killed with an illegal instr-
-+ uction exception.
-+
-+ Say Y, please.
-+
- config USE_OF
- bool
- select OF
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -334,7 +334,7 @@ OBJCOPYFLAGS += --remove-section=.regin
- head-y := arch/mips/kernel/head.o
-
- libs-y += arch/mips/lib/
--libs-y += arch/mips/math-emu/
-+libs-$(CONFIG_MIPS_FPU_EMULATOR) += arch/mips/math-emu/
-
- # See arch/mips/Kbuild for content of core part of the kernel
- core-y += arch/mips/
---- a/arch/mips/include/asm/fpu.h
-+++ b/arch/mips/include/asm/fpu.h
-@@ -230,8 +230,10 @@ static inline int init_fpu(void)
- /* Restore FRE */
- write_c0_config5(config5);
- enable_fpu_hazard();
-- } else
-+ } else if (IS_ENABLED(CONFIG_MIPS_FPU_EMULATOR))
- fpu_emulator_init_fpu();
-+ else
-+ ret = SIGILL;
-
- return ret;
- }
---- a/arch/mips/include/asm/fpu_emulator.h
-+++ b/arch/mips/include/asm/fpu_emulator.h
-@@ -30,6 +30,7 @@
- #include <asm/local.h>
- #include <asm/processor.h>
-
-+#ifdef CONFIG_MIPS_FPU_EMULATOR
- #ifdef CONFIG_DEBUG_FS
-
- struct mips_fpu_emulator_stats {
-@@ -179,6 +180,16 @@ do { \
- extern int fpu_emulator_cop1Handler(struct pt_regs *xcp,
- struct mips_fpu_struct *ctx, int has_fpu,
- void __user **fault_addr);
-+#else /* no CONFIG_MIPS_FPU_EMULATOR */
-+static inline int fpu_emulator_cop1Handler(struct pt_regs *xcp,
-+ struct mips_fpu_struct *ctx, int has_fpu,
-+ void __user **fault_addr)
-+{
-+ *fault_addr = NULL;
-+ return SIGILL; /* we don't speak MIPS FPU */
-+}
-+#endif /* CONFIG_MIPS_FPU_EMULATOR */
-+
- void force_fcr31_sig(unsigned long fcr31, void __user *fault_addr,
- struct task_struct *tsk);
- int process_fpemu_return(int sig, void __user *fault_addr,
---- a/arch/mips/include/asm/dsemul.h
-+++ b/arch/mips/include/asm/dsemul.h
-@@ -41,6 +41,7 @@ struct task_struct;
- extern int mips_dsemul(struct pt_regs *regs, mips_instruction ir,
- unsigned long branch_pc, unsigned long cont_pc);
-
-+#ifdef CONFIG_MIPS_FPU_EMULATOR
- /**
- * do_dsemulret() - Return from a delay slot 'emulation' frame
- * @xcp: User thread register context.
-@@ -88,5 +89,27 @@ extern bool dsemul_thread_rollback(struc
- * before @mm is freed in order to avoid memory leaks.
- */
- extern void dsemul_mm_cleanup(struct mm_struct *mm);
-+#else
-+static inline bool do_dsemulret(struct pt_regs *xcp)
-+{
-+ return false;
-+}
-+
-+static inline bool dsemul_thread_cleanup(struct task_struct *tsk)
-+{
-+ return false;
-+}
-+
-+static inline bool dsemul_thread_rollback(struct pt_regs *regs)
-+{
-+ return false;
-+}
-+
-+static inline void dsemul_mm_cleanup(struct mm_struct *mm)
-+{
-+
-+}
-+
-+#endif
-
- #endif /* __MIPS_ASM_DSEMUL_H__ */
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Subject: mips: replace -mlong-calls with -mno-long-calls to make function calls faster in kernel modules to achieve this, try to
-
-lede-commit: 3b3d64743ba2a874df9d70cd19e242205b0a788c
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- arch/mips/Makefile | 5 +
- arch/mips/include/asm/module.h | 5 +
- arch/mips/kernel/module.c | 279 ++++++++++++++++++++++++++++++++++++++++-
- 3 files changed, 284 insertions(+), 5 deletions(-)
-
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -94,8 +94,18 @@ all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlin
- cflags-y += -G 0 -mno-abicalls -fno-pic -pipe -mno-branch-likely
- cflags-y += -msoft-float
- LDFLAGS_vmlinux += -G 0 -static -n -nostdlib
-+ifdef CONFIG_64BIT
- KBUILD_AFLAGS_MODULE += -mlong-calls
- KBUILD_CFLAGS_MODULE += -mlong-calls
-+else
-+ ifdef CONFIG_DYNAMIC_FTRACE
-+ KBUILD_AFLAGS_MODULE += -mlong-calls
-+ KBUILD_CFLAGS_MODULE += -mlong-calls
-+ else
-+ KBUILD_AFLAGS_MODULE += -mno-long-calls
-+ KBUILD_CFLAGS_MODULE += -mno-long-calls
-+ endif
-+endif
-
- ifeq ($(CONFIG_RELOCATABLE),y)
- LDFLAGS_vmlinux += --emit-relocs
---- a/arch/mips/include/asm/module.h
-+++ b/arch/mips/include/asm/module.h
-@@ -12,6 +12,11 @@ struct mod_arch_specific {
- const struct exception_table_entry *dbe_start;
- const struct exception_table_entry *dbe_end;
- struct mips_hi16 *r_mips_hi16_list;
-+
-+ void *phys_plt_tbl;
-+ void *virt_plt_tbl;
-+ unsigned int phys_plt_offset;
-+ unsigned int virt_plt_offset;
- };
-
- typedef uint8_t Elf64_Byte; /* Type for a 8-bit quantity. */
---- a/arch/mips/kernel/module.c
-+++ b/arch/mips/kernel/module.c
-@@ -44,14 +44,221 @@ struct mips_hi16 {
- static LIST_HEAD(dbe_list);
- static DEFINE_SPINLOCK(dbe_lock);
-
--#ifdef MODULE_START
-+/*
-+ * Get the potential max trampolines size required of the init and
-+ * non-init sections. Only used if we cannot find enough contiguous
-+ * physically mapped memory to put the module into.
-+ */
-+static unsigned int
-+get_plt_size(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
-+ const char *secstrings, unsigned int symindex, bool is_init)
-+{
-+ unsigned long ret = 0;
-+ unsigned int i, j;
-+ Elf_Sym *syms;
-+
-+ /* Everything marked ALLOC (this includes the exported symbols) */
-+ for (i = 1; i < hdr->e_shnum; ++i) {
-+ unsigned int info = sechdrs[i].sh_info;
-+
-+ if (sechdrs[i].sh_type != SHT_REL
-+ && sechdrs[i].sh_type != SHT_RELA)
-+ continue;
-+
-+ /* Not a valid relocation section? */
-+ if (info >= hdr->e_shnum)
-+ continue;
-+
-+ /* Don't bother with non-allocated sections */
-+ if (!(sechdrs[info].sh_flags & SHF_ALLOC))
-+ continue;
-+
-+ /* If it's called *.init*, and we're not init, we're
-+ not interested */
-+ if ((strstr(secstrings + sechdrs[i].sh_name, ".init") != 0)
-+ != is_init)
-+ continue;
-+
-+ syms = (Elf_Sym *) sechdrs[symindex].sh_addr;
-+ if (sechdrs[i].sh_type == SHT_REL) {
-+ Elf_Mips_Rel *rel = (void *) sechdrs[i].sh_addr;
-+ unsigned int size = sechdrs[i].sh_size / sizeof(*rel);
-+
-+ for (j = 0; j < size; ++j) {
-+ Elf_Sym *sym;
-+
-+ if (ELF_MIPS_R_TYPE(rel[j]) != R_MIPS_26)
-+ continue;
-+
-+ sym = syms + ELF_MIPS_R_SYM(rel[j]);
-+ if (!is_init && sym->st_shndx != SHN_UNDEF)
-+ continue;
-+
-+ ret += 4 * sizeof(int);
-+ }
-+ } else {
-+ Elf_Mips_Rela *rela = (void *) sechdrs[i].sh_addr;
-+ unsigned int size = sechdrs[i].sh_size / sizeof(*rela);
-+
-+ for (j = 0; j < size; ++j) {
-+ Elf_Sym *sym;
-+
-+ if (ELF_MIPS_R_TYPE(rela[j]) != R_MIPS_26)
-+ continue;
-+
-+ sym = syms + ELF_MIPS_R_SYM(rela[j]);
-+ if (!is_init && sym->st_shndx != SHN_UNDEF)
-+ continue;
-+
-+ ret += 4 * sizeof(int);
-+ }
-+ }
-+ }
-+
-+ return ret;
-+}
-+
-+#ifndef MODULE_START
-+static void *alloc_phys(unsigned long size)
-+{
-+ unsigned order;
-+ struct page *page;
-+ struct page *p;
-+
-+ size = PAGE_ALIGN(size);
-+ order = get_order(size);
-+
-+ page = alloc_pages(GFP_KERNEL | __GFP_NORETRY | __GFP_NOWARN |
-+ __GFP_THISNODE, order);
-+ if (!page)
-+ return NULL;
-+
-+ split_page(page, order);
-+
-+ /* mark all pages except for the last one */
-+ for (p = page; p + 1 < page + (size >> PAGE_SHIFT); ++p)
-+ set_bit(PG_owner_priv_1, &p->flags);
-+
-+ for (p = page + (size >> PAGE_SHIFT); p < page + (1 << order); ++p)
-+ __free_page(p);
-+
-+ return page_address(page);
-+}
-+#endif
-+
-+static void free_phys(void *ptr)
-+{
-+ struct page *page;
-+ bool free;
-+
-+ page = virt_to_page(ptr);
-+ do {
-+ free = test_and_clear_bit(PG_owner_priv_1, &page->flags);
-+ __free_page(page);
-+ page++;
-+ } while (free);
-+}
-+
-+
- void *module_alloc(unsigned long size)
- {
-+#ifdef MODULE_START
- return __vmalloc_node_range(size, 1, MODULE_START, MODULE_END,
- GFP_KERNEL, PAGE_KERNEL, 0, NUMA_NO_NODE,
- __builtin_return_address(0));
-+#else
-+ void *ptr;
-+
-+ if (size == 0)
-+ return NULL;
-+
-+ ptr = alloc_phys(size);
-+
-+ /* If we failed to allocate physically contiguous memory,
-+ * fall back to regular vmalloc. The module loader code will
-+ * create jump tables to handle long jumps */
-+ if (!ptr)
-+ return vmalloc(size);
-+
-+ return ptr;
-+#endif
- }
-+
-+static inline bool is_phys_addr(void *ptr)
-+{
-+#ifdef CONFIG_64BIT
-+ return (KSEGX((unsigned long)ptr) == CKSEG0);
-+#else
-+ return (KSEGX(ptr) == KSEG0);
- #endif
-+}
-+
-+/* Free memory returned from module_alloc */
-+void module_memfree(void *module_region)
-+{
-+ if (is_phys_addr(module_region))
-+ free_phys(module_region);
-+ else
-+ vfree(module_region);
-+}
-+
-+static void *__module_alloc(int size, bool phys)
-+{
-+ void *ptr;
-+
-+ if (phys)
-+ ptr = kmalloc(size, GFP_KERNEL);
-+ else
-+ ptr = vmalloc(size);
-+ return ptr;
-+}
-+
-+static void __module_free(void *ptr)
-+{
-+ if (is_phys_addr(ptr))
-+ kfree(ptr);
-+ else
-+ vfree(ptr);
-+}
-+
-+int module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
-+ char *secstrings, struct module *mod)
-+{
-+ unsigned int symindex = 0;
-+ unsigned int core_size, init_size;
-+ int i;
-+
-+ mod->arch.phys_plt_offset = 0;
-+ mod->arch.virt_plt_offset = 0;
-+ mod->arch.phys_plt_tbl = NULL;
-+ mod->arch.virt_plt_tbl = NULL;
-+
-+ if (IS_ENABLED(CONFIG_64BIT))
-+ return 0;
-+
-+ for (i = 1; i < hdr->e_shnum; i++)
-+ if (sechdrs[i].sh_type == SHT_SYMTAB)
-+ symindex = i;
-+
-+ core_size = get_plt_size(hdr, sechdrs, secstrings, symindex, false);
-+ init_size = get_plt_size(hdr, sechdrs, secstrings, symindex, true);
-+
-+ if ((core_size + init_size) == 0)
-+ return 0;
-+
-+ mod->arch.phys_plt_tbl = __module_alloc(core_size + init_size, 1);
-+ if (!mod->arch.phys_plt_tbl)
-+ return -ENOMEM;
-+
-+ mod->arch.virt_plt_tbl = __module_alloc(core_size + init_size, 0);
-+ if (!mod->arch.virt_plt_tbl) {
-+ __module_free(mod->arch.phys_plt_tbl);
-+ mod->arch.phys_plt_tbl = NULL;
-+ return -ENOMEM;
-+ }
-+
-+ return 0;
-+}
-
- static int apply_r_mips_none(struct module *me, u32 *location,
- u32 base, Elf_Addr v, bool rela)
-@@ -67,9 +274,40 @@ static int apply_r_mips_32(struct module
- return 0;
- }
-
-+static Elf_Addr add_plt_entry_to(unsigned *plt_offset,
-+ void *start, Elf_Addr v)
-+{
-+ unsigned *tramp = start + *plt_offset;
-+ *plt_offset += 4 * sizeof(int);
-+
-+ /* adjust carry for addiu */
-+ if (v & 0x00008000)
-+ v += 0x10000;
-+
-+ tramp[0] = 0x3c190000 | (v >> 16); /* lui t9, hi16 */
-+ tramp[1] = 0x27390000 | (v & 0xffff); /* addiu t9, t9, lo16 */
-+ tramp[2] = 0x03200008; /* jr t9 */
-+ tramp[3] = 0x00000000; /* nop */
-+
-+ return (Elf_Addr) tramp;
-+}
-+
-+static Elf_Addr add_plt_entry(struct module *me, void *location, Elf_Addr v)
-+{
-+ if (is_phys_addr(location))
-+ return add_plt_entry_to(&me->arch.phys_plt_offset,
-+ me->arch.phys_plt_tbl, v);
-+ else
-+ return add_plt_entry_to(&me->arch.virt_plt_offset,
-+ me->arch.virt_plt_tbl, v);
-+
-+}
-+
- static int apply_r_mips_26(struct module *me, u32 *location,
- u32 base, Elf_Addr v, bool rela)
- {
-+ u32 ofs = base & 0x03ffffff;
-+
- if (v % 4) {
- pr_err("module %s: dangerous R_MIPS_26 relocation\n",
- me->name);
-@@ -77,13 +315,17 @@ static int apply_r_mips_26(struct module
- }
-
- if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
-- pr_err("module %s: relocation overflow\n",
-- me->name);
-- return -ENOEXEC;
-+ v = add_plt_entry(me, location, v + (ofs << 2));
-+ if (!v) {
-+ pr_err("module %s: relocation overflow\n",
-+ me->name);
-+ return -ENOEXEC;
-+ }
-+ ofs = 0;
- }
-
- *location = (*location & ~0x03ffffff) |
-- ((base + (v >> 2)) & 0x03ffffff);
-+ ((ofs + (v >> 2)) & 0x03ffffff);
-
- return 0;
- }
-@@ -459,9 +701,36 @@ int module_finalize(const Elf_Ehdr *hdr,
- list_add(&me->arch.dbe_list, &dbe_list);
- spin_unlock_irq(&dbe_lock);
- }
-+
-+ /* Get rid of the fixup trampoline if we're running the module
-+ * from physically mapped address space */
-+ if (me->arch.phys_plt_offset == 0) {
-+ __module_free(me->arch.phys_plt_tbl);
-+ me->arch.phys_plt_tbl = NULL;
-+ }
-+ if (me->arch.virt_plt_offset == 0) {
-+ __module_free(me->arch.virt_plt_tbl);
-+ me->arch.virt_plt_tbl = NULL;
-+ }
-+
- return 0;
- }
-
-+void module_arch_freeing_init(struct module *mod)
-+{
-+ if (mod->state == MODULE_STATE_LIVE)
-+ return;
-+
-+ if (mod->arch.phys_plt_tbl) {
-+ __module_free(mod->arch.phys_plt_tbl);
-+ mod->arch.phys_plt_tbl = NULL;
-+ }
-+ if (mod->arch.virt_plt_tbl) {
-+ __module_free(mod->arch.virt_plt_tbl);
-+ mod->arch.virt_plt_tbl = NULL;
-+ }
-+}
-+
- void module_arch_cleanup(struct module *mod)
- {
- spin_lock_irq(&dbe_lock);
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Subject: [PATCH] mips: allow the compiler to optimize memset, memcmp, memcpy for better performance and (in some instances) smaller code
-
-lede-commit: 07e59c7bc7f375f792ec9734be42fe4fa391a8bb
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- arch/mips/boot/compressed/Makefile | 3 ++-
- arch/mips/include/asm/string.h | 38 ++++++++++++++++++++++++++++++++++++++
- arch/mips/lib/Makefile | 2 +-
- arch/mips/lib/memcmp.c | 22 ++++++++++++++++++++++
- 4 files changed, 63 insertions(+), 2 deletions(-)
- create mode 100644 arch/mips/lib/memcmp.c
-
---- a/arch/mips/boot/compressed/Makefile
-+++ b/arch/mips/boot/compressed/Makefile
-@@ -23,7 +23,8 @@ KBUILD_CFLAGS := $(filter-out -pg, $(KBU
- KBUILD_CFLAGS := $(filter-out -fstack-protector, $(KBUILD_CFLAGS))
-
- KBUILD_CFLAGS := $(KBUILD_CFLAGS) -D__KERNEL__ \
-- -DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) -D"VMLINUX_LOAD_ADDRESS_ULL=$(VMLINUX_LOAD_ADDRESS)ull"
-+ -DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) -D"VMLINUX_LOAD_ADDRESS_ULL=$(VMLINUX_LOAD_ADDRESS)ull" \
-+ -D__ZBOOT__
-
- KBUILD_AFLAGS := $(KBUILD_AFLAGS) -D__ASSEMBLY__ \
- -DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) \
---- a/arch/mips/include/asm/string.h
-+++ b/arch/mips/include/asm/string.h
-@@ -140,4 +140,42 @@ extern void *memcpy(void *__to, __const_
- #define __HAVE_ARCH_MEMMOVE
- extern void *memmove(void *__dest, __const__ void *__src, size_t __n);
-
-+#ifndef __ZBOOT__
-+#define memset(__s, __c, len) \
-+({ \
-+ size_t __len = (len); \
-+ void *__ret; \
-+ if (__builtin_constant_p(len) && __len >= 64) \
-+ __ret = memset((__s), (__c), __len); \
-+ else \
-+ __ret = __builtin_memset((__s), (__c), __len); \
-+ __ret; \
-+})
-+
-+#define memcpy(dst, src, len) \
-+({ \
-+ size_t __len = (len); \
-+ void *__ret; \
-+ if (__builtin_constant_p(len) && __len >= 64) \
-+ __ret = memcpy((dst), (src), __len); \
-+ else \
-+ __ret = __builtin_memcpy((dst), (src), __len); \
-+ __ret; \
-+})
-+
-+#define memmove(dst, src, len) \
-+({ \
-+ size_t __len = (len); \
-+ void *__ret; \
-+ if (__builtin_constant_p(len) && __len >= 64) \
-+ __ret = memmove((dst), (src), __len); \
-+ else \
-+ __ret = __builtin_memmove((dst), (src), __len); \
-+ __ret; \
-+})
-+
-+#define __HAVE_ARCH_MEMCMP
-+#define memcmp(src1, src2, len) __builtin_memcmp((src1), (src2), (len))
-+#endif
-+
- #endif /* _ASM_STRING_H */
---- a/arch/mips/lib/Makefile
-+++ b/arch/mips/lib/Makefile
-@@ -5,7 +5,7 @@
-
- lib-y += bitops.o csum_partial.o delay.o memcpy.o memset.o \
- mips-atomic.o strncpy_user.o \
-- strnlen_user.o uncached.o
-+ strnlen_user.o uncached.o memcmp.o
-
- obj-y += iomap.o iomap_copy.o
- obj-$(CONFIG_PCI) += iomap-pci.o
---- /dev/null
-+++ b/arch/mips/lib/memcmp.c
-@@ -0,0 +1,22 @@
-+/*
-+ * copied from linux/lib/string.c
-+ *
-+ * Copyright (C) 1991, 1992 Linus Torvalds
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/string.h>
-+
-+#undef memcmp
-+int memcmp(const void *cs, const void *ct, size_t count)
-+{
-+ const unsigned char *su1, *su2;
-+ int res = 0;
-+
-+ for (su1 = cs, su2 = ct; 0 < count; ++su1, ++su2, count--)
-+ if ((res = *su1 - *su2) != 0)
-+ break;
-+ return res;
-+}
-+EXPORT_SYMBOL(memcmp);
-+
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: adjust mips highmem offset to avoid the need for -mlong-calls on systems with >256M RAM
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- arch/mips/include/asm/mach-generic/spaces.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/include/asm/mach-generic/spaces.h
-+++ b/arch/mips/include/asm/mach-generic/spaces.h
-@@ -50,7 +50,7 @@
- * Memory above this physical address will be considered highmem.
- */
- #ifndef HIGHMEM_START
--#define HIGHMEM_START _AC(0x20000000, UL)
-+#define HIGHMEM_START _AC(0x10000000, UL)
- #endif
-
- #endif /* CONFIG_32BIT */
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: add -mtune=34kc to MIPS CFLAGS when building for mips32r2
-
-This provides a good tradeoff across at least 24Kc-74Kc, while also
-producing smaller code.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- arch/mips/Makefile | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -177,7 +177,7 @@ cflags-$(CONFIG_CPU_VR41XX) += -march=r4
- cflags-$(CONFIG_CPU_R4X00) += -march=r4600 -Wa,--trap
- cflags-$(CONFIG_CPU_TX49XX) += -march=r4600 -Wa,--trap
- cflags-$(CONFIG_CPU_MIPS32_R1) += -march=mips32 -Wa,--trap
--cflags-$(CONFIG_CPU_MIPS32_R2) += -march=mips32r2 -Wa,--trap
-+cflags-$(CONFIG_CPU_MIPS32_R2) += -march=mips32r2 -mtune=34kc -Wa,--trap
- cflags-$(CONFIG_CPU_MIPS32_R6) += -march=mips32r6 -Wa,--trap -modd-spreg
- cflags-$(CONFIG_CPU_MIPS64_R1) += -march=mips64 -Wa,--trap
- cflags-$(CONFIG_CPU_MIPS64_R2) += -march=mips64r2 -Wa,--trap
+++ /dev/null
-From 87ec87c2ad615c1a177cd08ef5fa29fc739f6e50 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 23 Dec 2018 18:06:53 +0100
-Subject: [PATCH] MIPS: Add CPU option reporting to /proc/cpuinfo
-
-Many MIPS CPUs have optional CPU features which are not activates for
-all CPU cores. Print the CPU options which are implemented in the core
-in /proc/cpuinfo. This makes it possible to see what features are
-supported and which are not supported. This should cover all standard
-MIPS extensions, before it only printed information about the main MIPS
-ASEs.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/kernel/proc.c | 116 ++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 116 insertions(+)
-
---- a/arch/mips/kernel/proc.c
-+++ b/arch/mips/kernel/proc.c
-@@ -134,6 +134,122 @@ static int show_cpuinfo(struct seq_file
- seq_printf(m, "micromips kernel\t: %s\n",
- (read_c0_config3() & MIPS_CONF3_ISA_OE) ? "yes" : "no");
- }
-+
-+ seq_printf(m, "Options implemented\t:");
-+ if (cpu_has_tlb)
-+ seq_printf(m, "%s", " tlb");
-+ if (cpu_has_ftlb)
-+ seq_printf(m, "%s", " ftlb");
-+ if (cpu_has_tlbinv)
-+ seq_printf(m, "%s", " tlbinv");
-+ if (cpu_has_segments)
-+ seq_printf(m, "%s", " segments");
-+ if (cpu_has_rixiex)
-+ seq_printf(m, "%s", " rixiex");
-+ if (cpu_has_ldpte)
-+ seq_printf(m, "%s", " ldpte");
-+ if (cpu_has_maar)
-+ seq_printf(m, "%s", " maar");
-+ if (cpu_has_rw_llb)
-+ seq_printf(m, "%s", " rw_llb");
-+ if (cpu_has_4kex)
-+ seq_printf(m, "%s", " 4kex");
-+ if (cpu_has_3k_cache)
-+ seq_printf(m, "%s", " 3k_cache");
-+ if (cpu_has_4k_cache)
-+ seq_printf(m, "%s", " 4k_cache");
-+ if (cpu_has_6k_cache)
-+ seq_printf(m, "%s", " 6k_cache");
-+ if (cpu_has_8k_cache)
-+ seq_printf(m, "%s", " 8k_cache");
-+ if (cpu_has_tx39_cache)
-+ seq_printf(m, "%s", " tx39_cache");
-+ if (cpu_has_octeon_cache)
-+ seq_printf(m, "%s", " octeon_cache");
-+ if (cpu_has_fpu)
-+ seq_printf(m, "%s", " fpu");
-+ if (cpu_has_32fpr)
-+ seq_printf(m, "%s", " 32fpr");
-+ if (cpu_has_cache_cdex_p)
-+ seq_printf(m, "%s", " cache_cdex_p");
-+ if (cpu_has_cache_cdex_s)
-+ seq_printf(m, "%s", " cache_cdex_s");
-+ if (cpu_has_prefetch)
-+ seq_printf(m, "%s", " prefetch");
-+ if (cpu_has_mcheck)
-+ seq_printf(m, "%s", " mcheck");
-+ if (cpu_has_ejtag)
-+ seq_printf(m, "%s", " ejtag");
-+ if (cpu_has_llsc)
-+ seq_printf(m, "%s", " llsc");
-+ if (cpu_has_bp_ghist)
-+ seq_printf(m, "%s", " bp_ghist");
-+ if (cpu_has_guestctl0ext)
-+ seq_printf(m, "%s", " guestctl0ext");
-+ if (cpu_has_guestctl1)
-+ seq_printf(m, "%s", " guestctl1");
-+ if (cpu_has_guestctl2)
-+ seq_printf(m, "%s", " guestctl2");
-+ if (cpu_has_guestid)
-+ seq_printf(m, "%s", " guestid");
-+ if (cpu_has_drg)
-+ seq_printf(m, "%s", " drg");
-+ if (cpu_has_rixi)
-+ seq_printf(m, "%s", " rixi");
-+ if (cpu_has_lpa)
-+ seq_printf(m, "%s", " lpa");
-+ if (cpu_has_mvh)
-+ seq_printf(m, "%s", " mvh");
-+ if (cpu_has_vtag_icache)
-+ seq_printf(m, "%s", " vtag_icache");
-+ if (cpu_has_dc_aliases)
-+ seq_printf(m, "%s", " dc_aliases");
-+ if (cpu_has_ic_fills_f_dc)
-+ seq_printf(m, "%s", " ic_fills_f_dc");
-+ if (cpu_has_pindexed_dcache)
-+ seq_printf(m, "%s", " pindexed_dcache");
-+ if (cpu_has_userlocal)
-+ seq_printf(m, "%s", " userlocal");
-+ if (cpu_has_nofpuex)
-+ seq_printf(m, "%s", " nofpuex");
-+ if (cpu_has_vint)
-+ seq_printf(m, "%s", " vint");
-+ if (cpu_has_veic)
-+ seq_printf(m, "%s", " veic");
-+ if (cpu_has_inclusive_pcaches)
-+ seq_printf(m, "%s", " inclusive_pcaches");
-+ if (cpu_has_perf_cntr_intr_bit)
-+ seq_printf(m, "%s", " perf_cntr_intr_bit");
-+ if (cpu_has_ufr)
-+ seq_printf(m, "%s", " ufr");
-+ if (cpu_has_fre)
-+ seq_printf(m, "%s", " fre");
-+ if (cpu_has_cdmm)
-+ seq_printf(m, "%s", " cdmm");
-+ if (cpu_has_small_pages)
-+ seq_printf(m, "%s", " small_pages");
-+ if (cpu_has_nan_legacy)
-+ seq_printf(m, "%s", " nan_legacy");
-+ if (cpu_has_nan_2008)
-+ seq_printf(m, "%s", " nan_2008");
-+ if (cpu_has_ebase_wg)
-+ seq_printf(m, "%s", " ebase_wg");
-+ if (cpu_has_badinstr)
-+ seq_printf(m, "%s", " badinstr");
-+ if (cpu_has_badinstrp)
-+ seq_printf(m, "%s", " badinstrp");
-+ if (cpu_has_contextconfig)
-+ seq_printf(m, "%s", " contextconfig");
-+ if (cpu_has_perf)
-+ seq_printf(m, "%s", " perf");
-+ if (cpu_has_shared_ftlb_ram)
-+ seq_printf(m, "%s", " shared_ftlb_ram");
-+ if (cpu_has_shared_ftlb_entries)
-+ seq_printf(m, "%s", " shared_ftlb_entries");
-+ if (cpu_has_mipsmt_pertccounters)
-+ seq_printf(m, "%s", " mipsmt_pertccounters");
-+ seq_printf(m, "\n");
-+
- seq_printf(m, "shadow register sets\t: %d\n",
- cpu_data[n].srsets);
- seq_printf(m, "kscratch registers\t: %d\n",
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Subject: fix errors in unresolved weak symbols on arm
-
-lede-commit: 570699d4838a907c3ef9f2819bf19eb72997b32f
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- arch/arm/kernel/module.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/arm/kernel/module.c
-+++ b/arch/arm/kernel/module.c
-@@ -95,6 +95,10 @@ apply_relocate(Elf32_Shdr *sechdrs, cons
- return -ENOEXEC;
- }
-
-+ if ((IS_ERR_VALUE(sym->st_value) || !sym->st_value) &&
-+ ELF_ST_BIND(sym->st_info) == STB_WEAK)
-+ continue;
-+
- loc = dstsec->sh_addr + rel->r_offset;
-
- switch (ELF32_R_TYPE(rel->r_info)) {
+++ /dev/null
-From: Yousong Zhou <yszhou4tech@gmail.com>
-Subject: MIPS: kexec: Accept command line parameters from userspace.
-
-Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
----
- arch/mips/kernel/machine_kexec.c | 153 +++++++++++++++++++++++++++++++-----
- arch/mips/kernel/machine_kexec.h | 20 +++++
- arch/mips/kernel/relocate_kernel.S | 21 +++--
- 3 files changed, 167 insertions(+), 27 deletions(-)
- create mode 100644 arch/mips/kernel/machine_kexec.h
-
---- a/arch/mips/kernel/machine_kexec.c
-+++ b/arch/mips/kernel/machine_kexec.c
-@@ -10,14 +10,11 @@
- #include <linux/mm.h>
- #include <linux/delay.h>
-
-+#include <asm/bootinfo.h>
- #include <asm/cacheflush.h>
- #include <asm/page.h>
--
--extern const unsigned char relocate_new_kernel[];
--extern const size_t relocate_new_kernel_size;
--
--extern unsigned long kexec_start_address;
--extern unsigned long kexec_indirection_page;
-+#include <linux/uaccess.h>
-+#include "machine_kexec.h"
-
- int (*_machine_kexec_prepare)(struct kimage *) = NULL;
- void (*_machine_kexec_shutdown)(void) = NULL;
-@@ -28,6 +25,101 @@ atomic_t kexec_ready_to_reboot = ATOMIC_
- void (*_crash_smp_send_stop)(void) = NULL;
- #endif
-
-+static void machine_kexec_print_args(void)
-+{
-+ unsigned long argc = (int)kexec_args[0];
-+ int i;
-+
-+ pr_info("kexec_args[0] (argc): %lu\n", argc);
-+ pr_info("kexec_args[1] (argv): %p\n", (void *)kexec_args[1]);
-+ pr_info("kexec_args[2] (env ): %p\n", (void *)kexec_args[2]);
-+ pr_info("kexec_args[3] (desc): %p\n", (void *)kexec_args[3]);
-+
-+ for (i = 0; i < argc; i++) {
-+ pr_info("kexec_argv[%d] = %p, %s\n",
-+ i, kexec_argv[i], kexec_argv[i]);
-+ }
-+}
-+
-+static void machine_kexec_init_argv(struct kimage *image)
-+{
-+ void __user *buf = NULL;
-+ size_t bufsz;
-+ size_t size;
-+ int i;
-+
-+ bufsz = 0;
-+ for (i = 0; i < image->nr_segments; i++) {
-+ struct kexec_segment *seg;
-+
-+ seg = &image->segment[i];
-+ if (seg->bufsz < 6)
-+ continue;
-+
-+ if (strncmp((char *) seg->buf, "kexec ", 6))
-+ continue;
-+
-+ buf = seg->buf;
-+ bufsz = seg->bufsz;
-+ break;
-+ }
-+
-+ if (!buf)
-+ return;
-+
-+ size = KEXEC_COMMAND_LINE_SIZE;
-+ size = min(size, bufsz);
-+ if (size < bufsz)
-+ pr_warn("kexec command line truncated to %zd bytes\n", size);
-+
-+ /* Copy to kernel space */
-+ if (copy_from_user(kexec_argv_buf, buf, size))
-+ pr_warn("kexec command line copy to kernel space failed\n");
-+
-+ kexec_argv_buf[size - 1] = 0;
-+}
-+
-+static void machine_kexec_parse_argv(struct kimage *image)
-+{
-+ char *reboot_code_buffer;
-+ int reloc_delta;
-+ char *ptr;
-+ int argc;
-+ int i;
-+
-+ ptr = kexec_argv_buf;
-+ argc = 0;
-+
-+ /*
-+ * convert command line string to array of parameters
-+ * (as bootloader does).
-+ */
-+ while (ptr && *ptr && (KEXEC_MAX_ARGC > argc)) {
-+ if (*ptr == ' ') {
-+ *ptr++ = '\0';
-+ continue;
-+ }
-+
-+ kexec_argv[argc++] = ptr;
-+ ptr = strchr(ptr, ' ');
-+ }
-+
-+ if (!argc)
-+ return;
-+
-+ kexec_args[0] = argc;
-+ kexec_args[1] = (unsigned long)kexec_argv;
-+ kexec_args[2] = 0;
-+ kexec_args[3] = 0;
-+
-+ reboot_code_buffer = page_address(image->control_code_page);
-+ reloc_delta = reboot_code_buffer - (char *)kexec_relocate_new_kernel;
-+
-+ kexec_args[1] += reloc_delta;
-+ for (i = 0; i < argc; i++)
-+ kexec_argv[i] += reloc_delta;
-+}
-+
- static void kexec_image_info(const struct kimage *kimage)
- {
- unsigned long i;
-@@ -52,6 +144,18 @@ int
- machine_kexec_prepare(struct kimage *kimage)
- {
- kexec_image_info(kimage);
-+ /*
-+ * Whenever arguments passed from kexec-tools, Init the arguments as
-+ * the original ones to try avoiding booting failure.
-+ */
-+
-+ kexec_args[0] = fw_arg0;
-+ kexec_args[1] = fw_arg1;
-+ kexec_args[2] = fw_arg2;
-+ kexec_args[3] = fw_arg3;
-+
-+ machine_kexec_init_argv(kimage);
-+ machine_kexec_parse_argv(kimage);
-
- if (_machine_kexec_prepare)
- return _machine_kexec_prepare(kimage);
-@@ -89,10 +193,12 @@ machine_kexec(struct kimage *image)
- unsigned long *ptr;
-
- reboot_code_buffer =
-- (unsigned long)page_address(image->control_code_page);
-+ (unsigned long)page_address(image->control_code_page);
-+ pr_info("reboot_code_buffer = %p\n", (void *)reboot_code_buffer);
-
- kexec_start_address =
- (unsigned long) phys_to_virt(image->start);
-+ pr_info("kexec_start_address = %p\n", (void *)kexec_start_address);
-
- if (image->type == KEXEC_TYPE_DEFAULT) {
- kexec_indirection_page =
-@@ -100,9 +206,19 @@ machine_kexec(struct kimage *image)
- } else {
- kexec_indirection_page = (unsigned long)&image->head;
- }
-+ pr_info("kexec_indirection_page = %p\n", (void *)kexec_indirection_page);
-
-- memcpy((void*)reboot_code_buffer, relocate_new_kernel,
-- relocate_new_kernel_size);
-+ pr_info("Where is memcpy: %p\n", memcpy);
-+ pr_info("kexec_relocate_new_kernel = %p, kexec_relocate_new_kernel_end = %p\n",
-+ (void *)kexec_relocate_new_kernel, &kexec_relocate_new_kernel_end);
-+ pr_info("Copy %lu bytes from %p to %p\n", KEXEC_RELOCATE_NEW_KERNEL_SIZE,
-+ (void *)kexec_relocate_new_kernel, (void *)reboot_code_buffer);
-+ memcpy((void*)reboot_code_buffer, kexec_relocate_new_kernel,
-+ KEXEC_RELOCATE_NEW_KERNEL_SIZE);
-+
-+ pr_info("Before _print_args().\n");
-+ machine_kexec_print_args();
-+ pr_info("Before eval loop.\n");
-
- /*
- * The generic kexec code builds a page list with physical
-@@ -124,15 +240,16 @@ machine_kexec(struct kimage *image)
- /*
- * we do not want to be bothered.
- */
-+ pr_info("Before irq_disable.\n");
- local_irq_disable();
-
-- printk("Will call new kernel at %08lx\n", image->start);
-- printk("Bye ...\n");
-+ pr_info("Will call new kernel at %08lx\n", image->start);
-+ pr_info("Bye ...\n");
- __flush_cache_all();
- #ifdef CONFIG_SMP
- /* All secondary cpus now may jump to kexec_wait cycle */
- relocated_kexec_smp_wait = reboot_code_buffer +
-- (void *)(kexec_smp_wait - relocate_new_kernel);
-+ (void *)(kexec_smp_wait - kexec_relocate_new_kernel);
- smp_wmb();
- atomic_set(&kexec_ready_to_reboot, 1);
- #endif
---- /dev/null
-+++ b/arch/mips/kernel/machine_kexec.h
-@@ -0,0 +1,20 @@
-+#ifndef _MACHINE_KEXEC_H
-+#define _MACHINE_KEXEC_H
-+
-+#ifndef __ASSEMBLY__
-+extern const unsigned char kexec_relocate_new_kernel[];
-+extern unsigned long kexec_relocate_new_kernel_end;
-+extern unsigned long kexec_start_address;
-+extern unsigned long kexec_indirection_page;
-+
-+extern char kexec_argv_buf[];
-+extern char *kexec_argv[];
-+
-+#define KEXEC_RELOCATE_NEW_KERNEL_SIZE ((unsigned long)&kexec_relocate_new_kernel_end - (unsigned long)kexec_relocate_new_kernel)
-+#endif /* !__ASSEMBLY__ */
-+
-+#define KEXEC_COMMAND_LINE_SIZE 256
-+#define KEXEC_ARGV_SIZE (KEXEC_COMMAND_LINE_SIZE / 16)
-+#define KEXEC_MAX_ARGC (KEXEC_ARGV_SIZE / sizeof(long))
-+
-+#endif
---- a/arch/mips/kernel/relocate_kernel.S
-+++ b/arch/mips/kernel/relocate_kernel.S
-@@ -12,8 +12,9 @@
- #include <asm/mipsregs.h>
- #include <asm/stackframe.h>
- #include <asm/addrspace.h>
-+#include "machine_kexec.h"
-
--LEAF(relocate_new_kernel)
-+LEAF(kexec_relocate_new_kernel)
- PTR_L a0, arg0
- PTR_L a1, arg1
- PTR_L a2, arg2
-@@ -98,7 +99,7 @@ done:
- #endif
- /* jump to kexec_start_address */
- j s1
-- END(relocate_new_kernel)
-+ END(kexec_relocate_new_kernel)
-
- #ifdef CONFIG_SMP
- /*
-@@ -184,9 +185,15 @@ kexec_indirection_page:
- PTR 0
- .size kexec_indirection_page, PTRSIZE
-
--relocate_new_kernel_end:
-+kexec_argv_buf:
-+ EXPORT(kexec_argv_buf)
-+ .skip KEXEC_COMMAND_LINE_SIZE
-+ .size kexec_argv_buf, KEXEC_COMMAND_LINE_SIZE
-+
-+kexec_argv:
-+ EXPORT(kexec_argv)
-+ .skip KEXEC_ARGV_SIZE
-+ .size kexec_argv, KEXEC_ARGV_SIZE
-
--relocate_new_kernel_size:
-- EXPORT(relocate_new_kernel_size)
-- PTR relocate_new_kernel_end - relocate_new_kernel
-- .size relocate_new_kernel_size, PTRSIZE
-+kexec_relocate_new_kernel_end:
-+ EXPORT(kexec_relocate_new_kernel_end)
+++ /dev/null
-From 34ef04f3845ed2b47d57dd9d3b795b16e1f8185a Mon Sep 17 00:00:00 2001
-From: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
-Date: Fri, 15 Mar 2019 18:53:38 +0300
-Subject: [PATCH] arc add OWRTDTB section
-
-This change allows OpenWRT to patch resulting kernel binary with
-external .dtb.
-
-That allows us to re-use exactky the same vmlinux on different boards
-given its ARC core configurations match (at least cache line sizes etc).
-
-""patch-dtb" searches for ASCII "OWRTDTB:" strign and copies external
-.dtb right after it, keeping the string in place.
-
-Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
-Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
-Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
----
- arch/arc/kernel/head.S | 10 ++++++++++
- arch/arc/kernel/setup.c | 4 +++-
- arch/arc/kernel/vmlinux.lds.S | 13 +++++++++++++
- 3 files changed, 26 insertions(+), 1 deletion(-)
-
---- a/arch/arc/kernel/head.S
-+++ b/arch/arc/kernel/head.S
-@@ -59,6 +59,16 @@
- #endif
- .endm
-
-+ ; Here "patch-dtb" will embed external .dtb
-+ ; Note "patch-dtb" searches for ASCII "OWRTDTB:" string
-+ ; and pastes .dtb right after it, hense the string precedes
-+ ; __image_dtb symbol.
-+ .section .owrt, "aw",@progbits
-+ .ascii "OWRTDTB:"
-+ENTRY(__image_dtb)
-+ .fill 0x4000
-+END(__image_dtb)
-+
- .section .init.text, "ax",@progbits
-
- ;----------------------------------------------------------------
---- a/arch/arc/kernel/setup.c
-+++ b/arch/arc/kernel/setup.c
-@@ -527,7 +527,7 @@ void __init handle_uboot_args(void)
- ignore_uboot_args:
-
- if (use_embedded_dtb) {
-- machine_desc = setup_machine_fdt(__dtb_start);
-+ machine_desc = setup_machine_fdt(&__image_dtb);
- if (!machine_desc)
- panic("Embedded DT invalid\n");
- }
-@@ -543,6 +543,8 @@ ignore_uboot_args:
- }
- }
-
-+extern struct boot_param_header __image_dtb;
-+
- void __init setup_arch(char **cmdline_p)
- {
- handle_uboot_args();
---- a/arch/arc/kernel/vmlinux.lds.S
-+++ b/arch/arc/kernel/vmlinux.lds.S
-@@ -30,6 +30,19 @@ SECTIONS
-
- . = CONFIG_LINUX_LINK_BASE;
-
-+ /*
-+ * In OpenWRT we want to patch built binary embedding .dtb of choice.
-+ * This is implemented with "patch-dtb" utility which searches for
-+ * "OWRTDTB:" string in first 16k of image and if it is found
-+ * copies .dtb right after mentioned string.
-+ *
-+ * Note: "OWRTDTB:" won't be overwritten with .dtb, .dtb will follow it.
-+ */
-+ .owrt : {
-+ *(.owrt)
-+ . = ALIGN(PAGE_SIZE);
-+ }
-+
- _int_vec_base_lds = .;
- .vector : {
- *(.vector)
+++ /dev/null
-From: Alexey Brodkin <abrodkin@synopsys.com>
-Subject: arc: enable unaligned access in kernel mode
-
-This enables misaligned access handling even in kernel mode.
-Some wireless drivers (ath9k-htc and mt7601u) use misaligned accesses
-here and there and to cope with that without fixing stuff in the drivers
-we're just gracefully handling it on ARC.
-
-Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
----
- arch/arc/kernel/unaligned.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arc/kernel/unaligned.c
-+++ b/arch/arc/kernel/unaligned.c
-@@ -206,7 +206,7 @@ int misaligned_fixup(unsigned long addre
- char buf[TASK_COMM_LEN];
-
- /* handle user mode only and only if enabled by sysadmin */
-- if (!user_mode(regs) || !unaligned_enabled)
-+ if (!unaligned_enabled)
- return 1;
-
- if (no_unaligned_warning) {
+++ /dev/null
-From 203f17906ff45705fbdaa0430dbbc71142c2640f Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sat, 8 Dec 2018 21:45:53 +0100
-Subject: [PATCH 1/3] MIPS: Compile post DMA flush only when needed
-
-dma_sync_phys() is only called for some CPUs when a mapping is removed.
-Add ARCH_HAS_SYNC_DMA_FOR_CPU only for the CPUs listed in
-cpu_needs_post_dma_flush() which need this extra call and do not compile
-this code in for other CPUs. We need this for R10000, R12000, BMIPS5000
-CPUs and CPUs supporting MAAR which was introduced in MIPS32r5.
-
-This will hopefully improve the performance of the not affected devices.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/mips/Kconfig | 6 +++++-
- arch/mips/mm/dma-noncoherent.c | 2 ++
- 2 files changed, 7 insertions(+), 1 deletion(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -1117,7 +1117,6 @@ config DMA_PERDEV_COHERENT
- config DMA_NONCOHERENT
- bool
- select ARCH_HAS_SYNC_DMA_FOR_DEVICE
-- select ARCH_HAS_SYNC_DMA_FOR_CPU
- select NEED_DMA_MAP_STATE
- select DMA_NONCOHERENT_MMAP
- select DMA_NONCOHERENT_CACHE_SYNC
-@@ -1898,9 +1897,11 @@ config SYS_HAS_CPU_MIPS32_R3_5
-
- config SYS_HAS_CPU_MIPS32_R5
- bool
-+ select ARCH_HAS_SYNC_DMA_FOR_CPU
-
- config SYS_HAS_CPU_MIPS32_R6
- bool
-+ select ARCH_HAS_SYNC_DMA_FOR_CPU
-
- config SYS_HAS_CPU_MIPS64_R1
- bool
-@@ -1910,6 +1911,7 @@ config SYS_HAS_CPU_MIPS64_R2
-
- config SYS_HAS_CPU_MIPS64_R6
- bool
-+ select ARCH_HAS_SYNC_DMA_FOR_CPU
-
- config SYS_HAS_CPU_R3000
- bool
-@@ -1946,6 +1948,7 @@ config SYS_HAS_CPU_R8000
-
- config SYS_HAS_CPU_R10000
- bool
-+ select ARCH_HAS_SYNC_DMA_FOR_CPU
-
- config SYS_HAS_CPU_RM7000
- bool
-@@ -1974,6 +1977,7 @@ config SYS_HAS_CPU_BMIPS4380
- config SYS_HAS_CPU_BMIPS5000
- bool
- select SYS_HAS_CPU_BMIPS
-+ select ARCH_HAS_SYNC_DMA_FOR_CPU
-
- config SYS_HAS_CPU_XLR
- bool
---- a/arch/mips/mm/dma-noncoherent.c
-+++ b/arch/mips/mm/dma-noncoherent.c
-@@ -191,12 +191,14 @@ void arch_sync_dma_for_device(struct dev
- dma_sync_phys(paddr, size, dir);
- }
-
-+#ifdef CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU
- void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr,
- size_t size, enum dma_data_direction dir)
- {
- if (cpu_needs_post_dma_flush(dev))
- dma_sync_phys(paddr, size, dir);
- }
-+#endif
-
- void arch_dma_cache_sync(struct device *dev, void *vaddr, size_t size,
- enum dma_data_direction direction)
+++ /dev/null
-From 66770a004afe10df11d3902e16eaa0c2c39436bb Mon Sep 17 00:00:00 2001
-From: Pawel Dembicki <paweldembicki@gmail.com>
-Date: Fri, 24 May 2019 17:56:19 +0200
-Subject: [PATCH] powerpc: Enable kernel XZ compression option on PPC_85xx
-
-Enable kernel XZ compression option on PPC_85xx. Tested with
-simpleImage on TP-Link TL-WDR4900 (Freescale P1014 processor).
-
-Suggested-by: Christian Lamparter <chunkeey@gmail.com>
-Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
----
- arch/powerpc/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/powerpc/Kconfig
-+++ b/arch/powerpc/Kconfig
-@@ -197,7 +197,7 @@ config PPC
- select HAVE_IOREMAP_PROT
- select HAVE_IRQ_EXIT_ON_IRQ_STACK
- select HAVE_KERNEL_GZIP
-- select HAVE_KERNEL_XZ if PPC_BOOK3S
-+ select HAVE_KERNEL_XZ if PPC_BOOK3S || PPC_85xx
- select HAVE_KPROBES
- select HAVE_KPROBES_ON_FTRACE
- select HAVE_KRETPROBES
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Subject: make rootfs split/detection more generic - patch can be moved to generic-2.6 after testing on other platforms
-
-lede-commit: 328e660b31f0937d52c5ae3d6e7029409918a9df
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/mtd/Kconfig | 17 +++++++++++++++++
- drivers/mtd/mtdpart.c | 35 +++++++++++++++++++++++++++++++++++
- include/linux/mtd/partitions.h | 2 ++
- 3 files changed, 54 insertions(+)
-
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -11,6 +11,23 @@ menuconfig MTD
-
- if MTD
-
-+menu "OpenWrt specific MTD options"
-+
-+config MTD_ROOTFS_ROOT_DEV
-+ bool "Automatically set 'rootfs' partition to be root filesystem"
-+ default y
-+
-+config MTD_SPLIT_FIRMWARE
-+ bool "Automatically split firmware partition for kernel+rootfs"
-+ default y
-+
-+config MTD_SPLIT_FIRMWARE_NAME
-+ string "Firmware partition name"
-+ depends on MTD_SPLIT_FIRMWARE
-+ default "firmware"
-+
-+endmenu
-+
- config MTD_TESTS
- tristate "MTD tests support (DANGEROUS)"
- depends on m
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -29,10 +29,12 @@
- #include <linux/kmod.h>
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-+#include <linux/magic.h>
- #include <linux/err.h>
- #include <linux/of.h>
-
- #include "mtdcore.h"
-+#include "mtdsplit/mtdsplit.h"
-
- /* Our partition linked list */
- static LIST_HEAD(mtd_partitions);
-@@ -52,6 +54,8 @@ struct mtd_part {
- struct list_head list;
- };
-
-+static void mtd_partition_split(struct mtd_info *master, struct mtd_part *part);
-+
- /*
- * Given a pointer to the MTD object in the mtd_part structure, we can retrieve
- * the pointer to that structure.
-@@ -626,6 +630,7 @@ int mtd_add_partition(struct mtd_info *p
- if (ret)
- goto err_remove_part;
-
-+ mtd_partition_split(parent, new);
- mtd_add_partition_attrs(new);
-
- return 0;
-@@ -712,6 +717,29 @@ int mtd_del_partition(struct mtd_info *m
- }
- EXPORT_SYMBOL_GPL(mtd_del_partition);
-
-+#ifdef CONFIG_MTD_SPLIT_FIRMWARE_NAME
-+#define SPLIT_FIRMWARE_NAME CONFIG_MTD_SPLIT_FIRMWARE_NAME
-+#else
-+#define SPLIT_FIRMWARE_NAME "unused"
-+#endif
-+
-+static void split_firmware(struct mtd_info *master, struct mtd_part *part)
-+{
-+}
-+
-+static void mtd_partition_split(struct mtd_info *master, struct mtd_part *part)
-+{
-+ static int rootfs_found = 0;
-+
-+ if (rootfs_found)
-+ return;
-+
-+ if (IS_ENABLED(CONFIG_MTD_SPLIT_FIRMWARE) &&
-+ !strcmp(part->mtd.name, SPLIT_FIRMWARE_NAME) &&
-+ !of_find_property(mtd_get_of_node(&part->mtd), "compatible", NULL))
-+ split_firmware(master, part);
-+}
-+
- /*
- * This function, given a master MTD object and a partition table, creates
- * and registers slave MTD objects which are bound to the master according to
-@@ -752,6 +780,7 @@ int add_mtd_partitions(struct mtd_info *
- goto err_del_partitions;
- }
-
-+ mtd_partition_split(master, slave);
- mtd_add_partition_attrs(slave);
- /* Look for subpartitions */
- parse_mtd_partitions(&slave->mtd, parts[i].types, NULL);
+++ /dev/null
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: mtd: add support for different partition parser types
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/mtd/mtdpart.c | 56 ++++++++++++++++++++++++++++++++++++++++
- include/linux/mtd/partitions.h | 11 ++++++++
- 2 files changed, 67 insertions(+)
-
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -55,6 +55,10 @@ struct mtd_part {
- };
-
- static void mtd_partition_split(struct mtd_info *master, struct mtd_part *part);
-+static int parse_mtd_partitions_by_type(struct mtd_info *master,
-+ enum mtd_parser_type type,
-+ const struct mtd_partition **pparts,
-+ struct mtd_part_parser_data *data);
-
- /*
- * Given a pointer to the MTD object in the mtd_part structure, we can retrieve
-@@ -717,6 +721,36 @@ int mtd_del_partition(struct mtd_info *m
- }
- EXPORT_SYMBOL_GPL(mtd_del_partition);
-
-+static int
-+run_parsers_by_type(struct mtd_part *slave, enum mtd_parser_type type)
-+{
-+ struct mtd_partition *parts;
-+ int nr_parts;
-+ int i;
-+
-+ nr_parts = parse_mtd_partitions_by_type(&slave->mtd, type, (const struct mtd_partition **)&parts,
-+ NULL);
-+ if (nr_parts <= 0)
-+ return nr_parts;
-+
-+ if (WARN_ON(!parts))
-+ return 0;
-+
-+ for (i = 0; i < nr_parts; i++) {
-+ /* adjust partition offsets */
-+ parts[i].offset += slave->offset;
-+
-+ mtd_add_partition(slave->parent,
-+ parts[i].name,
-+ parts[i].offset,
-+ parts[i].size);
-+ }
-+
-+ kfree(parts);
-+
-+ return nr_parts;
-+}
-+
- #ifdef CONFIG_MTD_SPLIT_FIRMWARE_NAME
- #define SPLIT_FIRMWARE_NAME CONFIG_MTD_SPLIT_FIRMWARE_NAME
- #else
-@@ -1066,6 +1100,61 @@ void mtd_part_parser_cleanup(struct mtd_
- }
- }
-
-+static struct mtd_part_parser *
-+get_partition_parser_by_type(enum mtd_parser_type type,
-+ struct mtd_part_parser *start)
-+{
-+ struct mtd_part_parser *p, *ret = NULL;
-+
-+ spin_lock(&part_parser_lock);
-+
-+ p = list_prepare_entry(start, &part_parsers, list);
-+ if (start)
-+ mtd_part_parser_put(start);
-+
-+ list_for_each_entry_continue(p, &part_parsers, list) {
-+ if (p->type == type && try_module_get(p->owner)) {
-+ ret = p;
-+ break;
-+ }
-+ }
-+
-+ spin_unlock(&part_parser_lock);
-+
-+ return ret;
-+}
-+
-+static int parse_mtd_partitions_by_type(struct mtd_info *master,
-+ enum mtd_parser_type type,
-+ const struct mtd_partition **pparts,
-+ struct mtd_part_parser_data *data)
-+{
-+ struct mtd_part_parser *prev = NULL;
-+ int ret = 0;
-+
-+ while (1) {
-+ struct mtd_part_parser *parser;
-+
-+ parser = get_partition_parser_by_type(type, prev);
-+ if (!parser)
-+ break;
-+
-+ ret = (*parser->parse_fn)(master, pparts, data);
-+
-+ if (ret > 0) {
-+ mtd_part_parser_put(parser);
-+ printk(KERN_NOTICE
-+ "%d %s partitions found on MTD device %s\n",
-+ ret, parser->name, master->name);
-+ break;
-+ }
-+
-+ prev = parser;
-+ }
-+
-+ return ret;
-+}
-+
- int mtd_is_partition(const struct mtd_info *mtd)
- {
- struct mtd_part *part;
---- a/include/linux/mtd/partitions.h
-+++ b/include/linux/mtd/partitions.h
-@@ -73,6 +73,10 @@ struct mtd_part_parser_data {
- * Functions dealing with the various ways of partitioning the space
- */
-
-+enum mtd_parser_type {
-+ MTD_PARSER_TYPE_DEVICE = 0,
-+};
-+
- struct mtd_part_parser {
- struct list_head list;
- struct module *owner;
-@@ -81,6 +85,7 @@ struct mtd_part_parser {
- int (*parse_fn)(struct mtd_info *, const struct mtd_partition **,
- struct mtd_part_parser_data *);
- void (*cleanup)(const struct mtd_partition *pparts, int nr_parts);
-+ enum mtd_parser_type type;
- };
-
- /* Container for passing around a set of parsed partitions */
+++ /dev/null
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: kernel/3.10: allow to use partition parsers for rootfs and firmware split
-
-lede-commit: 3b71cd94bc9517bc25267dccb393b07d4b54564e
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/mtd/mtdpart.c | 37 +++++++++++++++++++++++++++++++++++++
- include/linux/mtd/partitions.h | 2 ++
- 2 files changed, 39 insertions(+)
-
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -759,6 +759,7 @@ run_parsers_by_type(struct mtd_part *sla
-
- static void split_firmware(struct mtd_info *master, struct mtd_part *part)
- {
-+ run_parsers_by_type(part, MTD_PARSER_TYPE_FIRMWARE);
- }
-
- static void mtd_partition_split(struct mtd_info *master, struct mtd_part *part)
-@@ -768,6 +769,12 @@ static void mtd_partition_split(struct m
- if (rootfs_found)
- return;
-
-+ if (!strcmp(part->mtd.name, "rootfs")) {
-+ run_parsers_by_type(part, MTD_PARSER_TYPE_ROOTFS);
-+
-+ rootfs_found = 1;
-+ }
-+
- if (IS_ENABLED(CONFIG_MTD_SPLIT_FIRMWARE) &&
- !strcmp(part->mtd.name, SPLIT_FIRMWARE_NAME) &&
- !of_find_property(mtd_get_of_node(&part->mtd), "compatible", NULL))
---- a/include/linux/mtd/partitions.h
-+++ b/include/linux/mtd/partitions.h
-@@ -75,6 +75,8 @@ struct mtd_part_parser_data {
-
- enum mtd_parser_type {
- MTD_PARSER_TYPE_DEVICE = 0,
-+ MTD_PARSER_TYPE_ROOTFS,
-+ MTD_PARSER_TYPE_FIRMWARE,
- };
-
- struct mtd_part_parser {
+++ /dev/null
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: [PATCH] kernel/3.10: move squashfs check from rootfs split code into a separate file
-
-lede-commit: d89bea92b31b4e157a0fa438e75370f089f73427
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/mtd/Kconfig | 2 ++
- drivers/mtd/Makefile | 2 ++
- 2 files changed, 4 insertions(+)
-
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -26,6 +26,8 @@ config MTD_SPLIT_FIRMWARE_NAME
- depends on MTD_SPLIT_FIRMWARE
- default "firmware"
-
-+source "drivers/mtd/mtdsplit/Kconfig"
-+
- endmenu
-
- config MTD_TESTS
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -7,6 +7,8 @@
- obj-$(CONFIG_MTD) += mtd.o
- mtd-y := mtdcore.o mtdsuper.o mtdconcat.o mtdpart.o mtdchar.o
-
-+obj-$(CONFIG_MTD_SPLIT) += mtdsplit/
-+
- obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o
- obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
- obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
+++ /dev/null
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: kernel/3.10: add separate rootfs partition parser
-
-lede-commit: daec7ad7688415156e2730e401503d09bd3acf91
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/mtd/mtdpart.c | 29 +++++++++++++++++++++++++++++
- include/linux/mtd/mtd.h | 18 ++++++++++++++++++
- include/linux/mtd/partitions.h | 2 ++
- 3 files changed, 49 insertions(+)
-
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -1179,6 +1179,24 @@ int mtd_is_partition(const struct mtd_in
- }
- EXPORT_SYMBOL_GPL(mtd_is_partition);
-
-+struct mtd_info *mtdpart_get_master(const struct mtd_info *mtd)
-+{
-+ if (!mtd_is_partition(mtd))
-+ return (struct mtd_info *)mtd;
-+
-+ return mtd_to_part(mtd)->parent;
-+}
-+EXPORT_SYMBOL_GPL(mtdpart_get_master);
-+
-+uint64_t mtdpart_get_offset(const struct mtd_info *mtd)
-+{
-+ if (!mtd_is_partition(mtd))
-+ return 0;
-+
-+ return mtd_to_part(mtd)->offset;
-+}
-+EXPORT_SYMBOL_GPL(mtdpart_get_offset);
-+
- /* Returns the size of the entire flash chip */
- uint64_t mtd_get_device_size(const struct mtd_info *mtd)
- {
---- a/include/linux/mtd/mtd.h
-+++ b/include/linux/mtd/mtd.h
-@@ -507,6 +507,24 @@ static inline void mtd_align_erase_req(s
- req->len += mtd->erasesize - mod;
- }
-
-+static inline uint64_t mtd_roundup_to_eb(uint64_t sz, struct mtd_info *mtd)
-+{
-+ if (mtd_mod_by_eb(sz, mtd) == 0)
-+ return sz;
-+
-+ /* Round up to next erase block */
-+ return (mtd_div_by_eb(sz, mtd) + 1) * mtd->erasesize;
-+}
-+
-+static inline uint64_t mtd_rounddown_to_eb(uint64_t sz, struct mtd_info *mtd)
-+{
-+ if (mtd_mod_by_eb(sz, mtd) == 0)
-+ return sz;
-+
-+ /* Round down to the start of the current erase block */
-+ return (mtd_div_by_eb(sz, mtd)) * mtd->erasesize;
-+}
-+
- static inline uint32_t mtd_div_by_ws(uint64_t sz, struct mtd_info *mtd)
- {
- if (mtd->writesize_shift)
---- a/include/linux/mtd/partitions.h
-+++ b/include/linux/mtd/partitions.h
-@@ -116,6 +116,8 @@ int mtd_is_partition(const struct mtd_in
- int mtd_add_partition(struct mtd_info *master, const char *name,
- long long offset, long long length);
- int mtd_del_partition(struct mtd_info *master, int partno);
-+struct mtd_info *mtdpart_get_master(const struct mtd_info *mtd);
-+uint64_t mtdpart_get_offset(const struct mtd_info *mtd);
- uint64_t mtd_get_device_size(const struct mtd_info *mtd);
-
- #endif
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Subject: mtd: implement write support for partitions covering only a part of an eraseblock (buffer data that would otherwise be erased)
-
-lede-commit: 87a8e8ac1067f58ba831c4aae443f3655c31cd80
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/mtd/mtdpart.c | 90 ++++++++++++++++++++++++++++++++++++++++++++-----
- include/linux/mtd/mtd.h | 4 +++
- 2 files changed, 85 insertions(+), 9 deletions(-)
-
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -36,6 +36,8 @@
- #include "mtdcore.h"
- #include "mtdsplit/mtdsplit.h"
-
-+#define MTD_ERASE_PARTIAL 0x8000 /* partition only covers parts of an erase block */
-+
- /* Our partition linked list */
- static LIST_HEAD(mtd_partitions);
- static DEFINE_MUTEX(mtd_partitions_mutex);
-@@ -220,11 +222,77 @@ static int part_erase(struct mtd_info *m
- {
- struct mtd_part *part = mtd_to_part(mtd);
- int ret;
-+ size_t wrlen = 0;
-+ u8 *erase_buf = NULL;
-+ u32 erase_buf_ofs = 0;
-+ bool partial_start = false;
-+
-+ if (mtd->flags & MTD_ERASE_PARTIAL) {
-+ size_t readlen = 0;
-+ u64 mtd_ofs;
-+
-+ erase_buf = kmalloc(part->parent->erasesize, GFP_ATOMIC);
-+ if (!erase_buf)
-+ return -ENOMEM;
-+
-+ mtd_ofs = part->offset + instr->addr;
-+ erase_buf_ofs = do_div(mtd_ofs, part->parent->erasesize);
-+
-+ if (erase_buf_ofs > 0) {
-+ instr->addr -= erase_buf_ofs;
-+ ret = mtd_read(part->parent,
-+ instr->addr + part->offset,
-+ part->parent->erasesize,
-+ &readlen, erase_buf);
-+
-+ instr->len += erase_buf_ofs;
-+ partial_start = true;
-+ } else {
-+ mtd_ofs = part->offset + part->mtd.size;
-+ erase_buf_ofs = part->parent->erasesize -
-+ do_div(mtd_ofs, part->parent->erasesize);
-+
-+ if (erase_buf_ofs > 0) {
-+ instr->len += erase_buf_ofs;
-+ ret = mtd_read(part->parent,
-+ part->offset + instr->addr +
-+ instr->len - part->parent->erasesize,
-+ part->parent->erasesize, &readlen,
-+ erase_buf);
-+ } else {
-+ ret = 0;
-+ }
-+ }
-+ if (ret < 0) {
-+ kfree(erase_buf);
-+ return ret;
-+ }
-+
-+ }
-
- instr->addr += part->offset;
- ret = part->parent->_erase(part->parent, instr);
- if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
- instr->fail_addr -= part->offset;
-+
-+ if (mtd->flags & MTD_ERASE_PARTIAL) {
-+ if (partial_start) {
-+ part->parent->_write(part->parent,
-+ instr->addr, erase_buf_ofs,
-+ &wrlen, erase_buf);
-+ instr->addr += erase_buf_ofs;
-+ } else {
-+ instr->len -= erase_buf_ofs;
-+ part->parent->_write(part->parent,
-+ instr->addr + instr->len,
-+ erase_buf_ofs, &wrlen,
-+ erase_buf +
-+ part->parent->erasesize -
-+ erase_buf_ofs);
-+ }
-+ kfree(erase_buf);
-+ }
-+
- instr->addr -= part->offset;
-
- return ret;
-@@ -539,19 +607,22 @@ static struct mtd_part *allocate_partiti
- remainder = do_div(tmp, wr_alignment);
- if ((slave->mtd.flags & MTD_WRITEABLE) && remainder) {
- /* Doesn't start on a boundary of major erase size */
-- /* FIXME: Let it be writable if it is on a boundary of
-- * _minor_ erase size though */
-- slave->mtd.flags &= ~MTD_WRITEABLE;
-- printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase/write block boundary -- force read-only\n",
-- part->name);
-+ slave->mtd.flags |= MTD_ERASE_PARTIAL;
-+ if (((u32)slave->mtd.size) > parent->erasesize)
-+ slave->mtd.flags &= ~MTD_WRITEABLE;
-+ else
-+ slave->mtd.erasesize = slave->mtd.size;
- }
-
- tmp = part_absolute_offset(parent) + slave->offset + slave->mtd.size;
- remainder = do_div(tmp, wr_alignment);
- if ((slave->mtd.flags & MTD_WRITEABLE) && remainder) {
-- slave->mtd.flags &= ~MTD_WRITEABLE;
-- printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase/write block -- force read-only\n",
-- part->name);
-+ slave->mtd.flags |= MTD_ERASE_PARTIAL;
-+
-+ if ((u32)slave->mtd.size > parent->erasesize)
-+ slave->mtd.flags &= ~MTD_WRITEABLE;
-+ else
-+ slave->mtd.erasesize = slave->mtd.size;
- }
-
- mtd_set_ooblayout(&slave->mtd, &part_ooblayout_ops);
+++ /dev/null
-From: Tim Harvey <tharvey@gateworks.com>
-Subject: mtd: allow partial block unlock
-
-This allows sysupgrade for devices such as the Gateworks Avila/Cambria
-product families based on the ixp4xx using the redboot bootloader with
-combined FIS directory and RedBoot config partitions on larger FLASH
-devices with larger eraseblocks.
-
-This second iteration of this patch addresses previous issues:
-- whitespace breakage fixed
-- unlock in all scenarios
-- simplification and fix logic bug
-
-[john@phrozen.org: this should be moved to the ixp4xx folder]
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
----
- drivers/mtd/mtdpart.c | 11 ++++++++++-
- 1 file changed, 10 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -307,7 +307,16 @@ static int part_lock(struct mtd_info *mt
- static int part_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
- {
- struct mtd_part *part = mtd_to_part(mtd);
-- return part->parent->_unlock(part->parent, ofs + part->offset, len);
-+
-+ ofs += part->offset;
-+
-+ if (mtd->flags & MTD_ERASE_PARTIAL) {
-+ /* round up len to next erasesize and round down offset to prev block */
-+ len = (mtd_div_by_eb(len, part->parent) + 1) * part->parent->erasesize;
-+ ofs &= ~(part->parent->erasesize - 1);
-+ }
-+
-+ return part->parent->_unlock(part->parent, ofs, len);
- }
-
- static int part_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Subject: [PATCH] mtd: redboot: add of_match_table with DT binding
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This allows parsing RedBoot compatible partitions for properly described
-flash device in DT.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -289,9 +289,16 @@ static int parse_redboot_partitions(stru
- return ret;
- }
-
-+static const struct of_device_id redboot_parser_of_match_table[] = {
-+ { .compatible = "ecoscentric,redboot-fis-partitions" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, redboot_parser_of_match_table);
-+
- static struct mtd_part_parser redboot_parser = {
- .parse_fn = parse_redboot_partitions,
- .name = "RedBoot",
-+ .of_match_table = redboot_parser_of_match_table,
- };
- module_mtd_part_parser(redboot_parser);
-
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Subject: add patch for including unpartitioned space in the rootfs partition for redboot devices (if applicable)
-
-[john@phrozen.org: used by ixp and others]
-
-lede-commit: 394918851f84e4d00fa16eb900e7700e95091f00
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/mtd/redboot.c | 19 +++++++++++++------
- 1 file changed, 13 insertions(+), 6 deletions(-)
-
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -265,14 +265,21 @@ static int parse_redboot_partitions(stru
- #endif
- names += strlen(names)+1;
-
--#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
- if(fl->next && fl->img->flash_base + fl->img->size + master->erasesize <= fl->next->img->flash_base) {
-- i++;
-- parts[i].offset = parts[i-1].size + parts[i-1].offset;
-- parts[i].size = fl->next->img->flash_base - parts[i].offset;
-- parts[i].name = nullname;
-- }
-+ if (!strcmp(parts[i].name, "rootfs")) {
-+ parts[i].size = fl->next->img->flash_base;
-+ parts[i].size &= ~(master->erasesize - 1);
-+ parts[i].size -= parts[i].offset;
-+#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
-+ nrparts--;
-+ } else {
-+ i++;
-+ parts[i].offset = parts[i-1].size + parts[i-1].offset;
-+ parts[i].size = fl->next->img->flash_base - parts[i].offset;
-+ parts[i].name = nullname;
- #endif
-+ }
-+ }
- tmp_fl = fl;
- fl = fl->next;
- kfree(tmp_fl);
+++ /dev/null
-From: Florian Fainelli <f.fainelli@gmail.com>
-Subject: Add myloader partition table parser
-
-[john@phozen.org: shoud be upstreamable]
-
-lede-commit: d8bf22859b51faa09d22c056fe221a45d2f7a3b8
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-[add myloader.c to patch]
-Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
-
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -177,6 +177,22 @@ menu "Partition parsers"
- source "drivers/mtd/parsers/Kconfig"
- endmenu
-
-+config MTD_MYLOADER_PARTS
-+ tristate "MyLoader partition parsing"
-+ depends on ADM5120 || ATH25 || ATH79
-+ ---help---
-+ MyLoader is a bootloader which allows the user to define partitions
-+ in flash devices, by putting a table in the second erase block
-+ on the device, similar to a partition table. This table gives the
-+ offsets and lengths of the user defined partitions.
-+
-+ If you need code which can detect and parse these tables, and
-+ register MTD 'partitions' corresponding to each image detected,
-+ enable this option.
-+
-+ You will still need the parsing functions to be called by the driver
-+ for your particular device. It won't happen automatically.
-+
- comment "User Modules And Translation Layers"
-
- #
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -16,6 +16,7 @@ obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
- obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
- obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o
- obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o
-+obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
- obj-y += parsers/
-
- # 'Users' - code which presents functionality to userspace.
---- /dev/null
-+++ b/drivers/mtd/myloader.c
-@@ -0,0 +1,181 @@
-+/*
-+ * Parse MyLoader-style flash partition tables and produce a Linux partition
-+ * array to match.
-+ *
-+ * Copyright (C) 2007-2009 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * This file was based on drivers/mtd/redboot.c
-+ * Author: Red Hat, Inc. - David Woodhouse <dwmw2@cambridge.redhat.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/version.h>
-+#include <linux/slab.h>
-+#include <linux/init.h>
-+#include <linux/vmalloc.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/byteorder/generic.h>
-+#include <linux/myloader.h>
-+
-+#define BLOCK_LEN_MIN 0x10000
-+#define PART_NAME_LEN 32
-+
-+struct part_data {
-+ struct mylo_partition_table tab;
-+ char names[MYLO_MAX_PARTITIONS][PART_NAME_LEN];
-+};
-+
-+static int myloader_parse_partitions(struct mtd_info *master,
-+ const struct mtd_partition **pparts,
-+ struct mtd_part_parser_data *data)
-+{
-+ struct part_data *buf;
-+ struct mylo_partition_table *tab;
-+ struct mylo_partition *part;
-+ struct mtd_partition *mtd_parts;
-+ struct mtd_partition *mtd_part;
-+ int num_parts;
-+ int ret, i;
-+ size_t retlen;
-+ char *names;
-+ unsigned long offset;
-+ unsigned long blocklen;
-+
-+ buf = vmalloc(sizeof(*buf));
-+ if (!buf) {
-+ return -ENOMEM;
-+ goto out;
-+ }
-+ tab = &buf->tab;
-+
-+ blocklen = master->erasesize;
-+ if (blocklen < BLOCK_LEN_MIN)
-+ blocklen = BLOCK_LEN_MIN;
-+
-+ offset = blocklen;
-+
-+ /* Find the partition table */
-+ for (i = 0; i < 4; i++, offset += blocklen) {
-+ printk(KERN_DEBUG "%s: searching for MyLoader partition table"
-+ " at offset 0x%lx\n", master->name, offset);
-+
-+ ret = mtd_read(master, offset, sizeof(*buf), &retlen,
-+ (void *)buf);
-+ if (ret)
-+ goto out_free_buf;
-+
-+ if (retlen != sizeof(*buf)) {
-+ ret = -EIO;
-+ goto out_free_buf;
-+ }
-+
-+ /* Check for Partition Table magic number */
-+ if (tab->magic == le32_to_cpu(MYLO_MAGIC_PARTITIONS))
-+ break;
-+
-+ }
-+
-+ if (tab->magic != le32_to_cpu(MYLO_MAGIC_PARTITIONS)) {
-+ printk(KERN_DEBUG "%s: no MyLoader partition table found\n",
-+ master->name);
-+ ret = 0;
-+ goto out_free_buf;
-+ }
-+
-+ /* The MyLoader and the Partition Table is always present */
-+ num_parts = 2;
-+
-+ /* Detect number of used partitions */
-+ for (i = 0; i < MYLO_MAX_PARTITIONS; i++) {
-+ part = &tab->partitions[i];
-+
-+ if (le16_to_cpu(part->type) == PARTITION_TYPE_FREE)
-+ continue;
-+
-+ num_parts++;
-+ }
-+
-+ mtd_parts = kzalloc((num_parts * sizeof(*mtd_part) +
-+ num_parts * PART_NAME_LEN), GFP_KERNEL);
-+
-+ if (!mtd_parts) {
-+ ret = -ENOMEM;
-+ goto out_free_buf;
-+ }
-+
-+ mtd_part = mtd_parts;
-+ names = (char *)&mtd_parts[num_parts];
-+
-+ strncpy(names, "myloader", PART_NAME_LEN);
-+ mtd_part->name = names;
-+ mtd_part->offset = 0;
-+ mtd_part->size = offset;
-+ mtd_part->mask_flags = MTD_WRITEABLE;
-+ mtd_part++;
-+ names += PART_NAME_LEN;
-+
-+ strncpy(names, "partition_table", PART_NAME_LEN);
-+ mtd_part->name = names;
-+ mtd_part->offset = offset;
-+ mtd_part->size = blocklen;
-+ mtd_part->mask_flags = MTD_WRITEABLE;
-+ mtd_part++;
-+ names += PART_NAME_LEN;
-+
-+ for (i = 0; i < MYLO_MAX_PARTITIONS; i++) {
-+ part = &tab->partitions[i];
-+
-+ if (le16_to_cpu(part->type) == PARTITION_TYPE_FREE)
-+ continue;
-+
-+ if ((buf->names[i][0]) && (buf->names[i][0] != '\xff'))
-+ strncpy(names, buf->names[i], PART_NAME_LEN);
-+ else
-+ snprintf(names, PART_NAME_LEN, "partition%d", i);
-+
-+ mtd_part->offset = le32_to_cpu(part->addr);
-+ mtd_part->size = le32_to_cpu(part->size);
-+ mtd_part->name = names;
-+ mtd_part++;
-+ names += PART_NAME_LEN;
-+ }
-+
-+ *pparts = mtd_parts;
-+ ret = num_parts;
-+
-+ out_free_buf:
-+ vfree(buf);
-+ out:
-+ return ret;
-+}
-+
-+static struct mtd_part_parser myloader_mtd_parser = {
-+ .owner = THIS_MODULE,
-+ .parse_fn = myloader_parse_partitions,
-+ .name = "MyLoader",
-+};
-+
-+static int __init myloader_mtd_parser_init(void)
-+{
-+ register_mtd_parser(&myloader_mtd_parser);
-+
-+ return 0;
-+}
-+
-+static void __exit myloader_mtd_parser_exit(void)
-+{
-+ deregister_mtd_parser(&myloader_mtd_parser);
-+}
-+
-+module_init(myloader_mtd_parser_init);
-+module_exit(myloader_mtd_parser_exit);
-+
-+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
-+MODULE_DESCRIPTION("Parsing code for MyLoader partition tables");
-+MODULE_LICENSE("GPL v2");
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Subject: [PATCH] mtd: bcm47xxpart: check for bad blocks when calculating offsets
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
-
---- a/drivers/mtd/parsers/parser_trx.c
-+++ b/drivers/mtd/parsers/parser_trx.c
-@@ -29,6 +29,33 @@ struct trx_header {
- uint32_t offset[3];
- } __packed;
-
-+/*
-+ * Calculate real end offset (address) for a given amount of data. It checks
-+ * all blocks skipping bad ones.
-+ */
-+static size_t parser_trx_real_offset(struct mtd_info *mtd, size_t bytes)
-+{
-+ size_t real_offset = 0;
-+
-+ if (mtd_block_isbad(mtd, real_offset))
-+ pr_warn("Base offset shouldn't be at bad block");
-+
-+ while (bytes >= mtd->erasesize) {
-+ bytes -= mtd->erasesize;
-+ real_offset += mtd->erasesize;
-+ while (mtd_block_isbad(mtd, real_offset)) {
-+ real_offset += mtd->erasesize;
-+
-+ if (real_offset >= mtd->size)
-+ return real_offset - mtd->erasesize;
-+ }
-+ }
-+
-+ real_offset += bytes;
-+
-+ return real_offset;
-+}
-+
- static const char *parser_trx_data_part_name(struct mtd_info *master,
- size_t offset)
- {
-@@ -83,21 +110,21 @@ static int parser_trx_parse(struct mtd_i
- if (trx.offset[2]) {
- part = &parts[curr_part++];
- part->name = "loader";
-- part->offset = trx.offset[i];
-+ part->offset = parser_trx_real_offset(mtd, trx.offset[i]);
- i++;
- }
-
- if (trx.offset[i]) {
- part = &parts[curr_part++];
- part->name = "linux";
-- part->offset = trx.offset[i];
-+ part->offset = parser_trx_real_offset(mtd, trx.offset[i]);
- i++;
- }
-
- if (trx.offset[i]) {
- part = &parts[curr_part++];
-- part->name = parser_trx_data_part_name(mtd, trx.offset[i]);
-- part->offset = trx.offset[i];
-+ part->offset = parser_trx_real_offset(mtd, trx.offset[i]);
-+ part->name = parser_trx_data_part_name(mtd, part->offset);
- i++;
- }
-
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Subject: mtd: bcm47xxpart: detect T_Meter partition
-
-It can be found on many Netgear devices. It consists of many 0x30 blocks
-starting with 4D 54.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/mtd/bcm47xxpart.c | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/drivers/mtd/bcm47xxpart.c
-+++ b/drivers/mtd/bcm47xxpart.c
-@@ -39,6 +39,7 @@
- #define NVRAM_HEADER 0x48534C46 /* FLSH */
- #define POT_MAGIC1 0x54544f50 /* POTT */
- #define POT_MAGIC2 0x504f /* OP */
-+#define T_METER_MAGIC 0x4D540000 /* MT */
- #define ML_MAGIC1 0x39685a42
- #define ML_MAGIC2 0x26594131
- #define TRX_MAGIC 0x30524448
-@@ -182,6 +183,15 @@ static int bcm47xxpart_parse(struct mtd_
- MTD_WRITEABLE);
- continue;
- }
-+
-+ /* T_Meter */
-+ if ((le32_to_cpu(buf[0x000 / 4]) & 0xFFFF0000) == T_METER_MAGIC &&
-+ (le32_to_cpu(buf[0x030 / 4]) & 0xFFFF0000) == T_METER_MAGIC &&
-+ (le32_to_cpu(buf[0x060 / 4]) & 0xFFFF0000) == T_METER_MAGIC) {
-+ bcm47xxpart_add_part(&parts[curr_part++], "T_Meter", offset,
-+ MTD_WRITEABLE);
-+ continue;
-+ }
-
- /* TRX */
- if (buf[0x000 / 4] == TRX_MAGIC) {
+++ /dev/null
-From 4437e01fb6bca63fccdba5d6c44888b0935885c2 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Thibaut=20VAR=C3=88NE?= <hacks@slashdirt.org>
-Date: Tue, 24 Mar 2020 11:45:07 +0100
-Subject: [PATCH] generic: routerboot partition build bits (4.19)
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This patch adds routerbootpart kernel build bits
-
-Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
----
- drivers/mtd/parsers/Kconfig | 9 +++++++++
- drivers/mtd/parsers/Makefile | 1 +
- 2 files changed, 10 insertions(+)
-
---- a/drivers/mtd/parsers/Kconfig
-+++ b/drivers/mtd/parsers/Kconfig
-@@ -14,3 +14,12 @@ config MTD_SHARPSL_PARTS
- This provides the read-only FTL logic necessary to read the partition
- table from the NAND flash of Sharp SL Series (Zaurus) and the MTD
- partition parser using this code.
-+
-+config MTD_ROUTERBOOT_PARTS
-+ tristate "RouterBoot flash partition parser"
-+ depends on MTD && OF
-+ help
-+ MikroTik RouterBoot is implemented as a multi segment system on the
-+ flash, some of which are fixed and some of which are located at
-+ variable offsets. This parser handles both cases via properly
-+ formatted DTS.
---- a/drivers/mtd/parsers/Makefile
-+++ b/drivers/mtd/parsers/Makefile
-@@ -1,2 +1,3 @@
- obj-$(CONFIG_MTD_PARSER_TRX) += parser_trx.o
- obj-$(CONFIG_MTD_SHARPSL_PARTS) += sharpslpart.o
-+obj-$(CONFIG_MTD_ROUTERBOOT_PARTS) += routerbootpart.o
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 22 Feb 2018 11:11:57 +0100
-Subject: [PATCH] mtd: spi-nor: allow NOR driver to write fewer bytes than
- requested
-
-The write size can be constrained by the maximum message/transfer size
-of the SPI controller. Only check for ret = 0 to avoid an infinite loop.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1459,7 +1459,7 @@ static int spi_nor_write(struct mtd_info
-
- write_enable(nor);
- ret = nor->write(nor, addr, page_remain, buf + i);
-- if (ret < 0)
-+ if (ret <= 0)
- goto write_err;
- written = ret;
-
-@@ -1468,13 +1468,6 @@ static int spi_nor_write(struct mtd_info
- goto write_err;
- *retlen += written;
- i += written;
-- if (written != page_remain) {
-- dev_err(nor->dev,
-- "While writing %zu bytes written %zd bytes\n",
-- page_remain, written);
-- ret = -EIO;
-- goto write_err;
-- }
- }
-
- write_err:
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: disable cfi cmdset 0002 erase suspend
-
-on some platforms, erase suspend leads to data corruption and lockups when write
-ops collide with erase ops. this has been observed on the buffalo wzr-hp-g300nh.
-rather than play whack-a-mole with a hard to reproduce issue on a variety of devices,
-simply disable erase suspend, as it will usually not produce any useful gain on
-the small filesystems used on embedded hardware.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/mtd/chips/cfi_cmdset_0002.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -812,7 +812,7 @@ static int get_chip(struct map_info *map
- return 0;
-
- case FL_ERASING:
-- if (!cfip || !(cfip->EraseSuspend & (0x1|0x2)) ||
-+ if (1 /* no suspend */ || !cfip || !(cfip->EraseSuspend & (0x1|0x2)) ||
- !(mode == FL_READY || mode == FL_POINT ||
- (mode == FL_WRITING && (cfip->EraseSuspend & 0x2))))
- goto sleep;
+++ /dev/null
-From: George Kashperko <george@znau.edu.ua>
-Subject: Issue map read after Write Buffer Load command to ensure chip is ready to receive data.
-
-Signed-off-by: George Kashperko <george@znau.edu.ua>
----
- drivers/mtd/chips/cfi_cmdset_0002.c | 1 +
- 1 file changed, 1 insertion(+)
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -1838,6 +1838,7 @@ static int __xipram do_write_buffer(stru
-
- /* Write Buffer Load */
- map_write(map, CMD(0x25), cmd_adr);
-+ (void) map_read(map, cmd_adr);
-
- chip->state = FL_WRITING_TO_BUFFER;
-
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Subject: Disable software protection bits for Macronix flashes.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/mtd/spi-nor/spi-nor.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -2737,6 +2737,7 @@ static int spi_nor_init(struct spi_nor *
- */
- if (JEDEC_MFR(nor->info) == SNOR_MFR_ATMEL ||
- JEDEC_MFR(nor->info) == SNOR_MFR_INTEL ||
-+ JEDEC_MFR(nor->info) == SNOR_MFR_MACRONIX ||
- JEDEC_MFR(nor->info) == SNOR_MFR_SST ||
- nor->info->flags & SPI_NOR_HAS_LOCK) {
- write_enable(nor);
+++ /dev/null
-From: Matthias Schiffer <mschiffer@universe-factory.net>
-Date: Tue, 9 Jan 2018 20:41:48 +0100
-Subject: [PATCH] Revert "mtd: spi-nor: fix Spansion regressions (aliased with
- Winbond)"
-
-This reverts commit 67b9bcd36906e12a15ffec19463afbbd6a41660e.
-
-The underlying issue breaking Spansion flash has been fixed with "mtd: spi-nor:
-wait until lock/unlock operations are ready" and "mtd: spi-nor: wait for SR_WIP
-to clear on initial unlock", so we can support unlocking for Winbond flash
-again.
-
-Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
----
- drivers/mtd/spi-nor/spi-nor.c | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -2739,6 +2739,7 @@ static int spi_nor_init(struct spi_nor *
- JEDEC_MFR(nor->info) == SNOR_MFR_INTEL ||
- JEDEC_MFR(nor->info) == SNOR_MFR_MACRONIX ||
- JEDEC_MFR(nor->info) == SNOR_MFR_SST ||
-+ JEDEC_MFR(nor->info) == SNOR_MFR_WINBOND ||
- nor->info->flags & SPI_NOR_HAS_LOCK) {
- write_enable(nor);
- write_sr(nor, 0);
-@@ -2875,7 +2876,8 @@ int spi_nor_scan(struct spi_nor *nor, co
-
- /* NOR protection support for STmicro/Micron chips and similar */
- if (JEDEC_MFR(info) == SNOR_MFR_MICRON ||
-- info->flags & SPI_NOR_HAS_LOCK) {
-+ JEDEC_MFR(info) == SNOR_MFR_WINBOND ||
-+ info->flags & SPI_NOR_HAS_LOCK) {
- nor->flash_lock = stm_lock;
- nor->flash_unlock = stm_unlock;
- nor->flash_is_locked = stm_is_locked;
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sat, 4 Nov 2017 07:40:23 +0100
-Subject: [PATCH] mtd: spi-nor: support limiting 4K sectors support based on
- flash size
-
-Some devices need 4K sectors to be able to deal with small flash chips.
-For instance, w25x05 is 64 KiB in size, and without 4K sectors, the
-entire chip is just one erase block.
-On bigger flash chip sizes, using 4K sectors can significantly slow down
-many operations, including using a writable filesystem. There are several
-platforms where it makes sense to use a single kernel on both kinds of
-devices.
-
-To support this properly, allow configuring an upper flash chip size
-limit for 4K sectors support.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/mtd/spi-nor/Kconfig
-+++ b/drivers/mtd/spi-nor/Kconfig
-@@ -39,6 +39,17 @@ config SPI_ASPEED_SMC
- and support for the SPI flash memory controller (SPI) for
- the host firmware. The implementation only supports SPI NOR.
-
-+config MTD_SPI_NOR_USE_4K_SECTORS_LIMIT
-+ int "Maximum flash chip size to use 4K sectors on (in KiB)"
-+ depends on MTD_SPI_NOR_USE_4K_SECTORS
-+ default "4096"
-+ help
-+ There are many flash chips that support 4K sectors, but are so large
-+ that using them significantly slows down writing large amounts of
-+ data or using a writable filesystem.
-+ Any flash chip larger than the size specified in this option will
-+ not use 4K sectors.
-+
- config SPI_ATMEL_QUADSPI
- tristate "Atmel Quad SPI Controller"
- depends on ARCH_AT91 || (ARM && COMPILE_TEST && !ARCH_EBSA110)
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -2651,10 +2651,12 @@ static int spi_nor_select_erase(struct s
-
- #ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
- /* prefer "small sector" erase if possible */
-- if (info->flags & SECT_4K) {
-+ if ((info->flags & SECT_4K) && (mtd->size <=
-+ CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT * 1024)) {
- nor->erase_opcode = SPINOR_OP_BE_4K;
- mtd->erasesize = 4096;
-- } else if (info->flags & SECT_4K_PMC) {
-+ } else if ((info->flags & SECT_4K_PMC) && (mtd->size <=
-+ CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT * 1024)) {
- nor->erase_opcode = SPINOR_OP_BE_4K_PMC;
- mtd->erasesize = 4096;
- } else
+++ /dev/null
-From: Robert Marko <robimarko@gmail.com>
-To: linux-mtd@lists.infradead.org
-Subject: mtd: spi-nor: Add Winbond w25q128jv support
-Date: Mon, 25 Jun 2018 13:17:48 +0200
-
-Datasheet:
-http://www.winbond.com/resource-files/w25q128jv%20revf%2003272018%20plus.pdf
-
-Testing done on Mikrotik Routerboard wAP R board.
-It does not support Dual or Quad modes.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
----
-
-Changes in v2:
- - Correct the title
----
- drivers/mtd/spi-nor/spi-nor.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1241,6 +1241,11 @@ static const struct flash_info spi_nor_i
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
- },
-+ {
-+ "w25q128jv", INFO(0xef7018, 0, 64 * 1024, 256,
-+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-+ },
- { "w25q80", INFO(0xef5014, 0, 64 * 1024, 16, SECT_4K) },
- { "w25q80bl", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) },
- { "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
+++ /dev/null
-From: Piotr Dymacz <pepe2k@gmail.com>
-Subject: kernel/mtd: add support for EON EN25Q128
-
-Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
----
- drivers/mtd/spi-nor/spi-nor.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -994,6 +994,7 @@ static const struct flash_info spi_nor_i
- { "en25q32b", INFO(0x1c3016, 0, 64 * 1024, 64, 0) },
- { "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) },
- { "en25q64", INFO(0x1c3017, 0, 64 * 1024, 128, SECT_4K) },
-+ { "en25q128", INFO(0x1c3018, 0, 64 * 1024, 256, SECT_4K) },
- { "en25qh32", INFO(0x1c7016, 0, 64 * 1024, 64, 0) },
- { "en25qh128", INFO(0x1c7018, 0, 64 * 1024, 256, 0) },
- { "en25qh256", INFO(0x1c7019, 0, 64 * 1024, 512, 0) },
+++ /dev/null
-From: André Valentin <avalentin@marcant.net>
-Subject: linux/mtd: add id for mx25u3235f needed by ZyXEL NBG6817
-
-Signed-off-by: André Valentin <avalentin@marcant.net>
----
- drivers/mtd/spi-nor/spi-nor.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1083,6 +1083,7 @@ static const struct flash_info spi_nor_i
- { "mx25l3205d", INFO(0xc22016, 0, 64 * 1024, 64, SECT_4K) },
- { "mx25l3255e", INFO(0xc29e16, 0, 64 * 1024, 64, SECT_4K) },
- { "mx25l6405d", INFO(0xc22017, 0, 64 * 1024, 128, SECT_4K) },
-+ { "mx25u3235f", INFO(0xc22536, 0, 64 * 1024, 64, 0) },
- { "mx25u2033e", INFO(0xc22532, 0, 64 * 1024, 4, SECT_4K) },
- { "mx25u4035", INFO(0xc22533, 0, 64 * 1024, 8, SECT_4K) },
- { "mx25u8035", INFO(0xc22534, 0, 64 * 1024, 16, SECT_4K) },
+++ /dev/null
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -996,6 +996,7 @@ static const struct flash_info spi_nor_i
- { "en25q64", INFO(0x1c3017, 0, 64 * 1024, 128, SECT_4K) },
- { "en25q128", INFO(0x1c3018, 0, 64 * 1024, 256, SECT_4K) },
- { "en25qh32", INFO(0x1c7016, 0, 64 * 1024, 64, 0) },
-+ { "en25qh64", INFO(0x1c7017, 0, 64 * 1024, 128, 0) },
- { "en25qh128", INFO(0x1c7018, 0, 64 * 1024, 256, 0) },
- { "en25qh256", INFO(0x1c7019, 0, 64 * 1024, 512, 0) },
- { "en25s64", INFO(0x1c3817, 0, 64 * 1024, 128, SECT_4K) },
+++ /dev/null
-From patchwork Thu Feb 6 17:19:41 2020
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-X-Patchwork-Submitter: Daniel Golle <daniel@makrotopia.org>
-X-Patchwork-Id: 1234465
-Date: Thu, 6 Feb 2020 19:19:41 +0200
-From: Daniel Golle <daniel@makrotopia.org>
-To: linux-mtd@lists.infradead.org
-Subject: [PATCH v2] mtd: spi-nor: Add support for xt25f128b chip
-Message-ID: <20200206171941.GA2398@makrotopia.org>
-MIME-Version: 1.0
-Content-Disposition: inline
-List-Subscribe: <http://lists.infradead.org/mailman/listinfo/linux-mtd>,
- <mailto:linux-mtd-request@lists.infradead.org?subject=subscribe>
-Cc: Eitan Cohen <eitan@neot-semadar.com>, Piotr Dymacz <pepe2k@gmail.com>,
- Tudor Ambarus <tudor.ambarus@microchip.com>
-Sender: "linux-mtd" <linux-mtd-bounces@lists.infradead.org>
-Errors-To: linux-mtd-bounces+incoming=patchwork.ozlabs.org@lists.infradead.org
-
-Add XT25F128B made by XTX Technology (Shenzhen) Limited.
-This chip supports dual and quad read and uniform 4K-byte erase.
-Verified on Teltonika RUT955 which comes with XT25F128B in recent
-versions of the device.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/mtd/spi-nor/spi-nor.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1275,6 +1275,9 @@ static const struct flash_info spi_nor_i
- /* XMC (Wuhan Xinxin Semiconductor Manufacturing Corp.) */
- { "XM25QH64A", INFO(0x207017, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "XM25QH128A", INFO(0x207018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-+
-+ /* XTX Technology (Shenzhen) Limited */
-+ { "xt25f128b", INFO(0x0B4018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { },
- };
-
+++ /dev/null
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: kernel/3.1[02]: move MTD root device setup code to mtdcore
-
-The current code only allows to automatically set
-root device on MTD partitions. Move the code to MTD
-core to allow to use it with all MTD devices.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/mtd/mtdcore.c | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
-@@ -41,6 +41,7 @@
- #include <linux/reboot.h>
- #include <linux/leds.h>
- #include <linux/debugfs.h>
-+#include <linux/root_dev.h>
-
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-@@ -593,6 +594,15 @@ int add_mtd_device(struct mtd_info *mtd)
- of this try_ nonsense, and no bitching about it
- either. :) */
- __module_get(THIS_MODULE);
-+
-+ if (!strcmp(mtd->name, "rootfs") &&
-+ IS_ENABLED(CONFIG_MTD_ROOTFS_ROOT_DEV) &&
-+ ROOT_DEV == 0) {
-+ pr_notice("mtd: device %d (%s) set to be root filesystem\n",
-+ mtd->index, mtd->name);
-+ ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, mtd->index);
-+ }
-+
- return 0;
-
- fail_added:
+++ /dev/null
-From d68b4aa22e8c625685bfad642dd7337948dc0ad1 Mon Sep 17 00:00:00 2001
-From: Koen Vandeputte <koen.vandeputte@ncentric.com>
-Date: Mon, 6 Jan 2020 13:07:56 +0100
-Subject: [PATCH] mtd: spi-nor: add support for Gigadevice GD25D05
-
-Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
----
- drivers/mtd/spi-nor/spi-nor.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1017,6 +1017,11 @@ static const struct flash_info spi_nor_i
-
- /* GigaDevice */
- {
-+ "gd25d05", INFO(0xc84010, 0, 64 * 1024, 1,
-+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-+ },
-+ {
- "gd25q16", INFO(0xc84015, 0, 64 * 1024, 32,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
- SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
+++ /dev/null
-From: Daniel Golle <daniel@makrotopia.org>
-Subject: ubi: auto-attach mtd device named "ubi" or "data" on boot
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/mtd/ubi/build.c | 36 ++++++++++++++++++++++++++++++++++++
- 1 file changed, 36 insertions(+)
-
---- a/drivers/mtd/ubi/build.c
-+++ b/drivers/mtd/ubi/build.c
-@@ -1181,6 +1181,73 @@ static struct mtd_info * __init open_mtd
- return mtd;
- }
-
-+/*
-+ * This function tries attaching mtd partitions named either "ubi" or "data"
-+ * during boot.
-+ */
-+static void __init ubi_auto_attach(void)
-+{
-+ int err;
-+ struct mtd_info *mtd;
-+ loff_t offset = 0;
-+ size_t len;
-+ char magic[4];
-+
-+ /* try attaching mtd device named "ubi" or "data" */
-+ mtd = open_mtd_device("ubi");
-+ if (IS_ERR(mtd))
-+ mtd = open_mtd_device("data");
-+
-+ if (IS_ERR(mtd))
-+ return;
-+
-+ /* get the first not bad block */
-+ if (mtd_can_have_bb(mtd))
-+ while (mtd_block_isbad(mtd, offset)) {
-+ offset += mtd->erasesize;
-+
-+ if (offset > mtd->size) {
-+ pr_err("UBI error: Failed to find a non-bad "
-+ "block on mtd%d\n", mtd->index);
-+ goto cleanup;
-+ }
-+ }
-+
-+ /* check if the read from flash was successful */
-+ err = mtd_read(mtd, offset, 4, &len, (void *) magic);
-+ if ((err && !mtd_is_bitflip(err)) || len != 4) {
-+ pr_err("UBI error: unable to read from mtd%d\n", mtd->index);
-+ goto cleanup;
-+ }
-+
-+ /* check for a valid ubi magic */
-+ if (strncmp(magic, "UBI#", 4)) {
-+ pr_err("UBI error: no valid UBI magic found inside mtd%d\n", mtd->index);
-+ goto cleanup;
-+ }
-+
-+ /* don't auto-add media types where UBI doesn't makes sense */
-+ if (mtd->type != MTD_NANDFLASH &&
-+ mtd->type != MTD_NORFLASH &&
-+ mtd->type != MTD_DATAFLASH &&
-+ mtd->type != MTD_MLCNANDFLASH)
-+ goto cleanup;
-+
-+ mutex_lock(&ubi_devices_mutex);
-+ pr_notice("UBI: auto-attach mtd%d\n", mtd->index);
-+ err = ubi_attach_mtd_dev(mtd, UBI_DEV_NUM_AUTO, 0, 0);
-+ mutex_unlock(&ubi_devices_mutex);
-+ if (err < 0) {
-+ pr_err("UBI error: cannot attach mtd%d\n", mtd->index);
-+ goto cleanup;
-+ }
-+
-+ return;
-+
-+cleanup:
-+ put_mtd_device(mtd);
-+}
-+
- static int __init ubi_init(void)
- {
- int err, i, k;
-@@ -1264,6 +1331,12 @@ static int __init ubi_init(void)
- }
- }
-
-+ /* auto-attach mtd devices only if built-in to the kernel and no ubi.mtd
-+ * parameter was given */
-+ if (IS_ENABLED(CONFIG_MTD_ROOTFS_ROOT_DEV) &&
-+ !ubi_is_module() && !mtd_devs)
-+ ubi_auto_attach();
-+
- err = ubiblock_init();
- if (err) {
- pr_err("UBI error: block: cannot initialize, error %d\n", err);
+++ /dev/null
-From: Daniel Golle <daniel@makrotopia.org>
-Subject: ubi: auto-create ubiblock device for rootfs
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/mtd/ubi/block.c | 42 ++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 42 insertions(+)
-
---- a/drivers/mtd/ubi/block.c
-+++ b/drivers/mtd/ubi/block.c
-@@ -633,6 +633,44 @@ static void __init ubiblock_create_from_
- }
- }
-
-+#define UBIFS_NODE_MAGIC 0x06101831
-+static inline int ubi_vol_is_ubifs(struct ubi_volume_desc *desc)
-+{
-+ int ret;
-+ uint32_t magic_of, magic;
-+ ret = ubi_read(desc, 0, (char *)&magic_of, 0, 4);
-+ if (ret)
-+ return 0;
-+ magic = le32_to_cpu(magic_of);
-+ return magic == UBIFS_NODE_MAGIC;
-+}
-+
-+static void __init ubiblock_create_auto_rootfs(void)
-+{
-+ int ubi_num, ret, is_ubifs;
-+ struct ubi_volume_desc *desc;
-+ struct ubi_volume_info vi;
-+
-+ for (ubi_num = 0; ubi_num < UBI_MAX_DEVICES; ubi_num++) {
-+ desc = ubi_open_volume_nm(ubi_num, "rootfs", UBI_READONLY);
-+ if (IS_ERR(desc))
-+ continue;
-+
-+ ubi_get_volume_info(desc, &vi);
-+ is_ubifs = ubi_vol_is_ubifs(desc);
-+ ubi_close_volume(desc);
-+ if (is_ubifs)
-+ break;
-+
-+ ret = ubiblock_create(&vi);
-+ if (ret)
-+ pr_err("UBI error: block: can't add '%s' volume, err=%d\n",
-+ vi.name, ret);
-+ /* always break if we get here */
-+ break;
-+ }
-+}
-+
- static void ubiblock_remove_all(void)
- {
- struct ubiblock *next;
-@@ -665,6 +703,10 @@ int __init ubiblock_init(void)
- */
- ubiblock_create_from_param();
-
-+ /* auto-attach "rootfs" volume if existing and non-ubifs */
-+ if (IS_ENABLED(CONFIG_MTD_ROOTFS_ROOT_DEV))
-+ ubiblock_create_auto_rootfs();
-+
- /*
- * Block devices are only created upon user requests, so we ignore
- * existing volumes.
+++ /dev/null
-From: Daniel Golle <daniel@makrotopia.org>
-Subject: try auto-mounting ubi0:rootfs in init/do_mounts.c
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- init/do_mounts.c | 26 +++++++++++++++++++++++++-
- 1 file changed, 25 insertions(+), 1 deletion(-)
-
---- a/init/do_mounts.c
-+++ b/init/do_mounts.c
-@@ -427,7 +427,28 @@ retry:
- out:
- put_page(page);
- }
--
-+
-+static int __init mount_ubi_rootfs(void)
-+{
-+ int flags = MS_SILENT;
-+ int err, tried = 0;
-+
-+ while (tried < 2) {
-+ err = do_mount_root("ubi0:rootfs", "ubifs", flags, \
-+ root_mount_data);
-+ switch (err) {
-+ case -EACCES:
-+ flags |= MS_RDONLY;
-+ tried++;
-+ break;
-+ default:
-+ return err;
-+ }
-+ }
-+
-+ return -EINVAL;
-+}
-+
- #ifdef CONFIG_ROOT_NFS
-
- #define NFSROOT_TIMEOUT_MIN 5
-@@ -521,6 +542,10 @@ void __init mount_root(void)
- change_floppy("root floppy");
- }
- #endif
-+#ifdef CONFIG_MTD_ROOTFS_ROOT_DEV
-+ if (!mount_ubi_rootfs())
-+ return;
-+#endif
- #ifdef CONFIG_BLOCK
- {
- int err = create_dev("/dev/root", ROOT_DEV);
+++ /dev/null
-From: Daniel Golle <daniel@makrotopia.org>
-Subject: ubi: set ROOT_DEV to ubiblock "rootfs" if unset
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/mtd/ubi/block.c | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/drivers/mtd/ubi/block.c
-+++ b/drivers/mtd/ubi/block.c
-@@ -50,6 +50,7 @@
- #include <linux/scatterlist.h>
- #include <linux/idr.h>
- #include <asm/div64.h>
-+#include <linux/root_dev.h>
-
- #include "ubi-media.h"
- #include "ubi.h"
-@@ -445,6 +446,15 @@ int ubiblock_create(struct ubi_volume_in
- dev_info(disk_to_dev(dev->gd), "created from ubi%d:%d(%s)",
- dev->ubi_num, dev->vol_id, vi->name);
- mutex_unlock(&devices_mutex);
-+
-+ if (!strcmp(vi->name, "rootfs") &&
-+ IS_ENABLED(CONFIG_MTD_ROOTFS_ROOT_DEV) &&
-+ ROOT_DEV == 0) {
-+ pr_notice("ubiblock: device ubiblock%d_%d (%s) set to be root filesystem\n",
-+ dev->ubi_num, dev->vol_id, vi->name);
-+ ROOT_DEV = MKDEV(gd->major, gd->first_minor);
-+ }
-+
- return 0;
-
- out_free_queue:
+++ /dev/null
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: mtd: add EOF marker support to the UBI layer
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/mtd/ubi/attach.c | 25 ++++++++++++++++++++++---
- drivers/mtd/ubi/ubi.h | 1 +
- 2 files changed, 23 insertions(+), 3 deletions(-)
-
---- a/drivers/mtd/ubi/attach.c
-+++ b/drivers/mtd/ubi/attach.c
-@@ -939,6 +939,13 @@ static bool vol_ignored(int vol_id)
- #endif
- }
-
-+static bool ec_hdr_has_eof(struct ubi_ec_hdr *ech)
-+{
-+ return ech->padding1[0] == 'E' &&
-+ ech->padding1[1] == 'O' &&
-+ ech->padding1[2] == 'F';
-+}
-+
- /**
- * scan_peb - scan and process UBI headers of a PEB.
- * @ubi: UBI device description object
-@@ -971,9 +978,21 @@ static int scan_peb(struct ubi_device *u
- return 0;
- }
-
-- err = ubi_io_read_ec_hdr(ubi, pnum, ech, 0);
-- if (err < 0)
-- return err;
-+ if (!ai->eof_found) {
-+ err = ubi_io_read_ec_hdr(ubi, pnum, ech, 0);
-+ if (err < 0)
-+ return err;
-+
-+ if (ec_hdr_has_eof(ech)) {
-+ pr_notice("UBI: EOF marker found, PEBs from %d will be erased\n",
-+ pnum);
-+ ai->eof_found = true;
-+ }
-+ }
-+
-+ if (ai->eof_found)
-+ err = UBI_IO_FF_BITFLIPS;
-+
- switch (err) {
- case 0:
- break;
---- a/drivers/mtd/ubi/ubi.h
-+++ b/drivers/mtd/ubi/ubi.h
-@@ -789,6 +789,7 @@ struct ubi_attach_info {
- int mean_ec;
- uint64_t ec_sum;
- int ec_count;
-+ bool eof_found;
- struct kmem_cache *aeb_slab_cache;
- struct ubi_ec_hdr *ech;
- struct ubi_vid_io_buf *vidb;
+++ /dev/null
-From 1bd1b740f208d1cf4071932cc51860d37266c402 Mon Sep 17 00:00:00 2001
-From: Bernhard Frauendienst <kernel@nospam.obeliks.de>
-Date: Sat, 1 Sep 2018 00:30:11 +0200
-Subject: [PATCH 495/497] mtd: core: add get_mtd_device_by_node
-
-Add function to retrieve a mtd device by its OF node. Since drivers can
-assign arbitrary names to mtd devices in the absence of a label
-property, there is no other reliable way to retrieve a mtd device for a
-given OF node.
-
-Signed-off-by: Bernhard Frauendienst <kernel@nospam.obeliks.de>
-Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
----
- drivers/mtd/mtdcore.c | 38 ++++++++++++++++++++++++++++++++++++++
- include/linux/mtd/mtd.h | 2 ++
- 2 files changed, 40 insertions(+)
-
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
-@@ -938,6 +938,44 @@ out_unlock:
- }
- EXPORT_SYMBOL_GPL(get_mtd_device_nm);
-
-+/**
-+ * get_mtd_device_by_node - obtain a validated handle for an MTD device
-+ * by of_node
-+ * @of_node: OF node of MTD device to open
-+ *
-+ * This function returns MTD device description structure in case of
-+ * success and an error code in case of failure.
-+ */
-+struct mtd_info *get_mtd_device_by_node(const struct device_node *of_node)
-+{
-+ int err = -ENODEV;
-+ struct mtd_info *mtd = NULL, *other;
-+
-+ mutex_lock(&mtd_table_mutex);
-+
-+ mtd_for_each_device(other) {
-+ if (of_node == other->dev.of_node) {
-+ mtd = other;
-+ break;
-+ }
-+ }
-+
-+ if (!mtd)
-+ goto out_unlock;
-+
-+ err = __get_mtd_device(mtd);
-+ if (err)
-+ goto out_unlock;
-+
-+ mutex_unlock(&mtd_table_mutex);
-+ return mtd;
-+
-+out_unlock:
-+ mutex_unlock(&mtd_table_mutex);
-+ return ERR_PTR(err);
-+}
-+EXPORT_SYMBOL_GPL(get_mtd_device_by_node);
-+
- void put_mtd_device(struct mtd_info *mtd)
- {
- mutex_lock(&mtd_table_mutex);
---- a/include/linux/mtd/mtd.h
-+++ b/include/linux/mtd/mtd.h
-@@ -589,6 +589,8 @@ extern struct mtd_info *get_mtd_device(s
- extern int __get_mtd_device(struct mtd_info *mtd);
- extern void __put_mtd_device(struct mtd_info *mtd);
- extern struct mtd_info *get_mtd_device_nm(const char *name);
-+extern struct mtd_info *get_mtd_device_by_node(
-+ const struct device_node *of_node);
- extern void put_mtd_device(struct mtd_info *mtd);
-
-
+++ /dev/null
-From 5734c6669fba7ddb5ef491ccff7159d15dba0b59 Mon Sep 17 00:00:00 2001
-From: Bernhard Frauendienst <kernel@nospam.obeliks.de>
-Date: Wed, 5 Sep 2018 01:32:51 +0200
-Subject: [PATCH 496/497] dt-bindings: add bindings for mtd-concat devices
-
-Document virtual mtd-concat device bindings.
-
-Signed-off-by: Bernhard Frauendienst <kernel@nospam.obeliks.de>
----
- .../devicetree/bindings/mtd/mtd-concat.txt | 36 +++++++++++++++++++
- 1 file changed, 36 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/mtd/mtd-concat.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/mtd/mtd-concat.txt
-@@ -0,0 +1,36 @@
-+Virtual MTD concat device
-+
-+Requires properties:
-+- devices: list of phandles to mtd nodes that should be concatenated
-+
-+Example:
-+
-+&spi {
-+ flash0: flash@0 {
-+ ...
-+ };
-+ flash1: flash@1 {
-+ ...
-+ };
-+};
-+
-+flash {
-+ compatible = "mtd-concat";
-+
-+ devices = <&flash0 &flash1>;
-+
-+ partitions {
-+ compatible = "fixed-partitions";
-+
-+ partition@0 {
-+ label = "boot";
-+ reg = <0x0000000 0x0040000>;
-+ read-only;
-+ };
-+
-+ partition@40000 {
-+ label = "firmware";
-+ reg = <0x0040000 0x1fc0000>;
-+ };
-+ }
-+}
+++ /dev/null
-From e53f712d8eac71f54399b61038ccf87d2cee99d7 Mon Sep 17 00:00:00 2001
-From: Bernhard Frauendienst <kernel@nospam.obeliks.de>
-Date: Sat, 25 Aug 2018 12:35:22 +0200
-Subject: [PATCH 497/497] mtd: mtdconcat: add dt driver for concat devices
-
-Some mtd drivers like physmap variants have support for concatenating
-multiple mtd devices, but there is no generic way to define such a
-concat device from within the device tree.
-
-This is useful for some SoC boards that use multiple flash chips as
-memory banks of a single mtd device, with partitions spanning chip
-borders.
-
-This commit adds a driver for creating virtual mtd-concat devices. They
-must have a compatible = "mtd-concat" line, and define a list of devices
-to concat in the 'devices' property, for example:
-
-flash {
- compatible = "mtd-concat";
-
- devices = <&flash0 &flash1>;
-
- partitions {
- ...
- };
-};
-
-The driver is added to the very end of the mtd Makefile to increase the
-likelyhood of all child devices already being loaded at the time of
-probing, preventing unnecessary deferred probes.
-
-Signed-off-by: Bernhard Frauendienst <kernel@nospam.obeliks.de>
----
- drivers/mtd/Kconfig | 2 +
- drivers/mtd/Makefile | 3 +
- drivers/mtd/composite/Kconfig | 12 +++
- drivers/mtd/composite/Makefile | 6 ++
- drivers/mtd/composite/virt_concat.c | 128 ++++++++++++++++++++++++++++
- 5 files changed, 151 insertions(+)
- create mode 100644 drivers/mtd/composite/Kconfig
- create mode 100644 drivers/mtd/composite/Makefile
- create mode 100644 drivers/mtd/composite/virt_concat.c
-
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -374,4 +374,6 @@ source "drivers/mtd/spi-nor/Kconfig"
-
- source "drivers/mtd/ubi/Kconfig"
-
-+source "drivers/mtd/composite/Kconfig"
-+
- endif # MTD
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -39,3 +39,6 @@ obj-y += chips/ lpddr/ maps/ devices/ n
-
- obj-$(CONFIG_MTD_SPI_NOR) += spi-nor/
- obj-$(CONFIG_MTD_UBI) += ubi/
-+
-+# Composite drivers must be loaded last
-+obj-y += composite/
---- /dev/null
-+++ b/drivers/mtd/composite/Kconfig
-@@ -0,0 +1,12 @@
-+menu "Composite MTD device drivers"
-+ depends on MTD!=n
-+
-+config MTD_VIRT_CONCAT
-+ tristate "Virtual concat MTD device"
-+ help
-+ This driver allows creation of a virtual MTD concat device, which
-+ concatenates multiple underlying MTD devices to a single device.
-+ This is required by some SoC boards where multiple memory banks are
-+ used as one device with partitions spanning across device boundaries.
-+
-+endmenu
---- /dev/null
-+++ b/drivers/mtd/composite/Makefile
-@@ -0,0 +1,6 @@
-+# SPDX-License-Identifier: GPL-2.0
-+#
-+# linux/drivers/mtd/composite/Makefile
-+#
-+
-+obj-$(CONFIG_MTD_VIRT_CONCAT) += virt_concat.o
---- /dev/null
-+++ b/drivers/mtd/composite/virt_concat.c
-@@ -0,0 +1,128 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+/*
-+ * Virtual concat MTD device driver
-+ *
-+ * Copyright (C) 2018 Bernhard Frauendienst
-+ * Author: Bernhard Frauendienst, kernel@nospam.obeliks.de
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/device.h>
-+#include <linux/mtd/concat.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/of.h>
-+#include <linux/of_platform.h>
-+#include <linux/slab.h>
-+
-+/*
-+ * struct of_virt_concat - platform device driver data.
-+ * @cmtd the final mtd_concat device
-+ * @num_devices the number of devices in @devices
-+ * @devices points to an array of devices already loaded
-+ */
-+struct of_virt_concat {
-+ struct mtd_info *cmtd;
-+ int num_devices;
-+ struct mtd_info **devices;
-+};
-+
-+static int virt_concat_remove(struct platform_device *pdev)
-+{
-+ struct of_virt_concat *info;
-+ int i;
-+
-+ info = platform_get_drvdata(pdev);
-+ if (!info)
-+ return 0;
-+
-+ // unset data for when this is called after a probe error
-+ platform_set_drvdata(pdev, NULL);
-+
-+ if (info->cmtd) {
-+ mtd_device_unregister(info->cmtd);
-+ mtd_concat_destroy(info->cmtd);
-+ }
-+
-+ if (info->devices) {
-+ for (i = 0; i < info->num_devices; i++)
-+ put_mtd_device(info->devices[i]);
-+ }
-+
-+ return 0;
-+}
-+
-+static int virt_concat_probe(struct platform_device *pdev)
-+{
-+ struct device_node *node = pdev->dev.of_node;
-+ struct of_phandle_iterator it;
-+ struct of_virt_concat *info;
-+ struct mtd_info *mtd;
-+ int err = 0, count;
-+
-+ count = of_count_phandle_with_args(node, "devices", NULL);
-+ if (count <= 0)
-+ return -EINVAL;
-+
-+ info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
-+ if (!info)
-+ return -ENOMEM;
-+ info->devices = devm_kcalloc(&pdev->dev, count,
-+ sizeof(*(info->devices)), GFP_KERNEL);
-+ if (!info->devices) {
-+ err = -ENOMEM;
-+ goto err_remove;
-+ }
-+
-+ platform_set_drvdata(pdev, info);
-+
-+ of_for_each_phandle(&it, err, node, "devices", NULL, 0) {
-+ mtd = get_mtd_device_by_node(it.node);
-+ if (IS_ERR(mtd)) {
-+ of_node_put(it.node);
-+ err = -EPROBE_DEFER;
-+ goto err_remove;
-+ }
-+
-+ info->devices[info->num_devices++] = mtd;
-+ }
-+
-+ info->cmtd = mtd_concat_create(info->devices, info->num_devices,
-+ dev_name(&pdev->dev));
-+ if (!info->cmtd) {
-+ err = -ENXIO;
-+ goto err_remove;
-+ }
-+
-+ info->cmtd->dev.parent = &pdev->dev;
-+ mtd_set_of_node(info->cmtd, node);
-+ mtd_device_register(info->cmtd, NULL, 0);
-+
-+ return 0;
-+
-+err_remove:
-+ virt_concat_remove(pdev);
-+
-+ return err;
-+}
-+
-+static const struct of_device_id virt_concat_of_match[] = {
-+ { .compatible = "mtd-concat", },
-+ { /* sentinel */ }
-+};
-+MODULE_DEVICE_TABLE(of, virt_concat_of_match);
-+
-+static struct platform_driver virt_concat_driver = {
-+ .probe = virt_concat_probe,
-+ .remove = virt_concat_remove,
-+ .driver = {
-+ .name = "virt-mtdconcat",
-+ .of_match_table = virt_concat_of_match,
-+ },
-+};
-+
-+module_platform_driver(virt_concat_driver);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_AUTHOR("Bernhard Frauendienst <kernel@nospam.obeliks.de>");
-+MODULE_DESCRIPTION("Virtual concat MTD device driver");
+++ /dev/null
-From: Alexandros C. Couloumbis <alex@ozo.com>
-Subject: fs: add jffs2/lzma support (not activated by default yet)
-
-lede-commit: c2c88d315fa0e881f8b19da07b62859b915b11b2
-Signed-off-by: Alexandros C. Couloumbis <alex@ozo.com>
----
- fs/jffs2/Kconfig | 9 +
- fs/jffs2/Makefile | 3 +
- fs/jffs2/compr.c | 6 +
- fs/jffs2/compr.h | 10 +-
- fs/jffs2/compr_lzma.c | 128 +++
- fs/jffs2/super.c | 33 +-
- include/linux/lzma.h | 62 ++
- include/linux/lzma/LzFind.h | 115 +++
- include/linux/lzma/LzHash.h | 54 +
- include/linux/lzma/LzmaDec.h | 231 +++++
- include/linux/lzma/LzmaEnc.h | 80 ++
- include/linux/lzma/Types.h | 226 +++++
- include/uapi/linux/jffs2.h | 1 +
- lib/Kconfig | 6 +
- lib/Makefile | 12 +
- lib/lzma/LzFind.c | 761 ++++++++++++++
- lib/lzma/LzmaDec.c | 999 +++++++++++++++++++
- lib/lzma/LzmaEnc.c | 2271 ++++++++++++++++++++++++++++++++++++++++++
- lib/lzma/Makefile | 7 +
- 19 files changed, 5008 insertions(+), 6 deletions(-)
- create mode 100644 fs/jffs2/compr_lzma.c
- create mode 100644 include/linux/lzma.h
- create mode 100644 include/linux/lzma/LzFind.h
- create mode 100644 include/linux/lzma/LzHash.h
- create mode 100644 include/linux/lzma/LzmaDec.h
- create mode 100644 include/linux/lzma/LzmaEnc.h
- create mode 100644 include/linux/lzma/Types.h
- create mode 100644 lib/lzma/LzFind.c
- create mode 100644 lib/lzma/LzmaDec.c
- create mode 100644 lib/lzma/LzmaEnc.c
- create mode 100644 lib/lzma/Makefile
-
---- a/fs/jffs2/Kconfig
-+++ b/fs/jffs2/Kconfig
-@@ -135,6 +135,15 @@ config JFFS2_LZO
- This feature was added in July, 2007. Say 'N' if you need
- compatibility with older bootloaders or kernels.
-
-+config JFFS2_LZMA
-+ bool "JFFS2 LZMA compression support" if JFFS2_COMPRESSION_OPTIONS
-+ select LZMA_COMPRESS
-+ select LZMA_DECOMPRESS
-+ depends on JFFS2_FS
-+ default n
-+ help
-+ JFFS2 wrapper to the LZMA C SDK
-+
- config JFFS2_RTIME
- bool "JFFS2 RTIME compression support" if JFFS2_COMPRESSION_OPTIONS
- depends on JFFS2_FS
---- a/fs/jffs2/Makefile
-+++ b/fs/jffs2/Makefile
-@@ -19,4 +19,7 @@ jffs2-$(CONFIG_JFFS2_RUBIN) += compr_rub
- jffs2-$(CONFIG_JFFS2_RTIME) += compr_rtime.o
- jffs2-$(CONFIG_JFFS2_ZLIB) += compr_zlib.o
- jffs2-$(CONFIG_JFFS2_LZO) += compr_lzo.o
-+jffs2-$(CONFIG_JFFS2_LZMA) += compr_lzma.o
- jffs2-$(CONFIG_JFFS2_SUMMARY) += summary.o
-+
-+CFLAGS_compr_lzma.o += -Iinclude/linux -Ilib/lzma
---- a/fs/jffs2/compr.c
-+++ b/fs/jffs2/compr.c
-@@ -378,6 +378,9 @@ int __init jffs2_compressors_init(void)
- #ifdef CONFIG_JFFS2_LZO
- jffs2_lzo_init();
- #endif
-+#ifdef CONFIG_JFFS2_LZMA
-+ jffs2_lzma_init();
-+#endif
- /* Setting default compression mode */
- #ifdef CONFIG_JFFS2_CMODE_NONE
- jffs2_compression_mode = JFFS2_COMPR_MODE_NONE;
-@@ -401,6 +404,9 @@ int __init jffs2_compressors_init(void)
- int jffs2_compressors_exit(void)
- {
- /* Unregistering compressors */
-+#ifdef CONFIG_JFFS2_LZMA
-+ jffs2_lzma_exit();
-+#endif
- #ifdef CONFIG_JFFS2_LZO
- jffs2_lzo_exit();
- #endif
---- a/fs/jffs2/compr.h
-+++ b/fs/jffs2/compr.h
-@@ -29,9 +29,9 @@
- #define JFFS2_DYNRUBIN_PRIORITY 20
- #define JFFS2_LZARI_PRIORITY 30
- #define JFFS2_RTIME_PRIORITY 50
--#define JFFS2_ZLIB_PRIORITY 60
--#define JFFS2_LZO_PRIORITY 80
--
-+#define JFFS2_LZMA_PRIORITY 70
-+#define JFFS2_ZLIB_PRIORITY 80
-+#define JFFS2_LZO_PRIORITY 90
-
- #define JFFS2_RUBINMIPS_DISABLED /* RUBINs will be used only */
- #define JFFS2_DYNRUBIN_DISABLED /* for decompression */
-@@ -101,5 +101,9 @@ void jffs2_zlib_exit(void);
- int jffs2_lzo_init(void);
- void jffs2_lzo_exit(void);
- #endif
-+#ifdef CONFIG_JFFS2_LZMA
-+int jffs2_lzma_init(void);
-+void jffs2_lzma_exit(void);
-+#endif
-
- #endif /* __JFFS2_COMPR_H__ */
---- /dev/null
-+++ b/fs/jffs2/compr_lzma.c
-@@ -0,0 +1,128 @@
-+/*
-+ * JFFS2 -- Journalling Flash File System, Version 2.
-+ *
-+ * For licensing information, see the file 'LICENCE' in this directory.
-+ *
-+ * JFFS2 wrapper to the LZMA C SDK
-+ *
-+ */
-+
-+#include <linux/lzma.h>
-+#include "compr.h"
-+
-+#ifdef __KERNEL__
-+ static DEFINE_MUTEX(deflate_mutex);
-+#endif
-+
-+CLzmaEncHandle *p;
-+Byte propsEncoded[LZMA_PROPS_SIZE];
-+SizeT propsSize = sizeof(propsEncoded);
-+
-+STATIC void lzma_free_workspace(void)
-+{
-+ LzmaEnc_Destroy(p, &lzma_alloc, &lzma_alloc);
-+}
-+
-+STATIC int INIT lzma_alloc_workspace(CLzmaEncProps *props)
-+{
-+ if ((p = (CLzmaEncHandle *)LzmaEnc_Create(&lzma_alloc)) == NULL)
-+ {
-+ PRINT_ERROR("Failed to allocate lzma deflate workspace\n");
-+ return -ENOMEM;
-+ }
-+
-+ if (LzmaEnc_SetProps(p, props) != SZ_OK)
-+ {
-+ lzma_free_workspace();
-+ return -1;
-+ }
-+
-+ if (LzmaEnc_WriteProperties(p, propsEncoded, &propsSize) != SZ_OK)
-+ {
-+ lzma_free_workspace();
-+ return -1;
-+ }
-+
-+ return 0;
-+}
-+
-+STATIC int jffs2_lzma_compress(unsigned char *data_in, unsigned char *cpage_out,
-+ uint32_t *sourcelen, uint32_t *dstlen)
-+{
-+ SizeT compress_size = (SizeT)(*dstlen);
-+ int ret;
-+
-+ #ifdef __KERNEL__
-+ mutex_lock(&deflate_mutex);
-+ #endif
-+
-+ ret = LzmaEnc_MemEncode(p, cpage_out, &compress_size, data_in, *sourcelen,
-+ 0, NULL, &lzma_alloc, &lzma_alloc);
-+
-+ #ifdef __KERNEL__
-+ mutex_unlock(&deflate_mutex);
-+ #endif
-+
-+ if (ret != SZ_OK)
-+ return -1;
-+
-+ *dstlen = (uint32_t)compress_size;
-+
-+ return 0;
-+}
-+
-+STATIC int jffs2_lzma_decompress(unsigned char *data_in, unsigned char *cpage_out,
-+ uint32_t srclen, uint32_t destlen)
-+{
-+ int ret;
-+ SizeT dl = (SizeT)destlen;
-+ SizeT sl = (SizeT)srclen;
-+ ELzmaStatus status;
-+
-+ ret = LzmaDecode(cpage_out, &dl, data_in, &sl, propsEncoded,
-+ propsSize, LZMA_FINISH_ANY, &status, &lzma_alloc);
-+
-+ if (ret != SZ_OK || status == LZMA_STATUS_NOT_FINISHED || dl != (SizeT)destlen)
-+ return -1;
-+
-+ return 0;
-+}
-+
-+static struct jffs2_compressor jffs2_lzma_comp = {
-+ .priority = JFFS2_LZMA_PRIORITY,
-+ .name = "lzma",
-+ .compr = JFFS2_COMPR_LZMA,
-+ .compress = &jffs2_lzma_compress,
-+ .decompress = &jffs2_lzma_decompress,
-+ .disabled = 0,
-+};
-+
-+int INIT jffs2_lzma_init(void)
-+{
-+ int ret;
-+ CLzmaEncProps props;
-+ LzmaEncProps_Init(&props);
-+
-+ props.dictSize = LZMA_BEST_DICT(0x2000);
-+ props.level = LZMA_BEST_LEVEL;
-+ props.lc = LZMA_BEST_LC;
-+ props.lp = LZMA_BEST_LP;
-+ props.pb = LZMA_BEST_PB;
-+ props.fb = LZMA_BEST_FB;
-+
-+ ret = lzma_alloc_workspace(&props);
-+ if (ret < 0)
-+ return ret;
-+
-+ ret = jffs2_register_compressor(&jffs2_lzma_comp);
-+ if (ret)
-+ lzma_free_workspace();
-+
-+ return ret;
-+}
-+
-+void jffs2_lzma_exit(void)
-+{
-+ jffs2_unregister_compressor(&jffs2_lzma_comp);
-+ lzma_free_workspace();
-+}
---- a/fs/jffs2/super.c
-+++ b/fs/jffs2/super.c
-@@ -374,14 +374,41 @@ static int __init init_jffs2_fs(void)
- BUILD_BUG_ON(sizeof(struct jffs2_raw_inode) != 68);
- BUILD_BUG_ON(sizeof(struct jffs2_raw_summary) != 32);
-
-- pr_info("version 2.2."
-+ pr_info("version 2.2"
- #ifdef CONFIG_JFFS2_FS_WRITEBUFFER
- " (NAND)"
- #endif
- #ifdef CONFIG_JFFS2_SUMMARY
-- " (SUMMARY) "
-+ " (SUMMARY)"
- #endif
-- " © 2001-2006 Red Hat, Inc.\n");
-+#ifdef CONFIG_JFFS2_ZLIB
-+ " (ZLIB)"
-+#endif
-+#ifdef CONFIG_JFFS2_LZO
-+ " (LZO)"
-+#endif
-+#ifdef CONFIG_JFFS2_LZMA
-+ " (LZMA)"
-+#endif
-+#ifdef CONFIG_JFFS2_RTIME
-+ " (RTIME)"
-+#endif
-+#ifdef CONFIG_JFFS2_RUBIN
-+ " (RUBIN)"
-+#endif
-+#ifdef CONFIG_JFFS2_CMODE_NONE
-+ " (CMODE_NONE)"
-+#endif
-+#ifdef CONFIG_JFFS2_CMODE_PRIORITY
-+ " (CMODE_PRIORITY)"
-+#endif
-+#ifdef CONFIG_JFFS2_CMODE_SIZE
-+ " (CMODE_SIZE)"
-+#endif
-+#ifdef CONFIG_JFFS2_CMODE_FAVOURLZO
-+ " (CMODE_FAVOURLZO)"
-+#endif
-+ " (c) 2001-2006 Red Hat, Inc.\n");
-
- jffs2_inode_cachep = kmem_cache_create("jffs2_i",
- sizeof(struct jffs2_inode_info),
---- /dev/null
-+++ b/include/linux/lzma.h
-@@ -0,0 +1,62 @@
-+#ifndef __LZMA_H__
-+#define __LZMA_H__
-+
-+#ifdef __KERNEL__
-+ #include <linux/kernel.h>
-+ #include <linux/sched.h>
-+ #include <linux/slab.h>
-+ #include <linux/vmalloc.h>
-+ #include <linux/init.h>
-+ #define LZMA_MALLOC vmalloc
-+ #define LZMA_FREE vfree
-+ #define PRINT_ERROR(msg) printk(KERN_WARNING #msg)
-+ #define INIT __init
-+ #define STATIC static
-+#else
-+ #include <stdint.h>
-+ #include <stdlib.h>
-+ #include <stdio.h>
-+ #include <unistd.h>
-+ #include <string.h>
-+ #include <asm/types.h>
-+ #include <errno.h>
-+ #include <linux/jffs2.h>
-+ #ifndef PAGE_SIZE
-+ extern int page_size;
-+ #define PAGE_SIZE page_size
-+ #endif
-+ #define LZMA_MALLOC malloc
-+ #define LZMA_FREE free
-+ #define PRINT_ERROR(msg) fprintf(stderr, msg)
-+ #define INIT
-+ #define STATIC
-+#endif
-+
-+#include "lzma/LzmaDec.h"
-+#include "lzma/LzmaEnc.h"
-+
-+#define LZMA_BEST_LEVEL (9)
-+#define LZMA_BEST_LC (0)
-+#define LZMA_BEST_LP (0)
-+#define LZMA_BEST_PB (0)
-+#define LZMA_BEST_FB (273)
-+
-+#define LZMA_BEST_DICT(n) (((int)((n) / 2)) * 2)
-+
-+static void *p_lzma_malloc(void *p, size_t size)
-+{
-+ if (size == 0)
-+ return NULL;
-+
-+ return LZMA_MALLOC(size);
-+}
-+
-+static void p_lzma_free(void *p, void *address)
-+{
-+ if (address != NULL)
-+ LZMA_FREE(address);
-+}
-+
-+static ISzAlloc lzma_alloc = {p_lzma_malloc, p_lzma_free};
-+
-+#endif
---- /dev/null
-+++ b/include/linux/lzma/LzFind.h
-@@ -0,0 +1,115 @@
-+/* LzFind.h -- Match finder for LZ algorithms
-+2009-04-22 : Igor Pavlov : Public domain */
-+
-+#ifndef __LZ_FIND_H
-+#define __LZ_FIND_H
-+
-+#include "Types.h"
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+typedef UInt32 CLzRef;
-+
-+typedef struct _CMatchFinder
-+{
-+ Byte *buffer;
-+ UInt32 pos;
-+ UInt32 posLimit;
-+ UInt32 streamPos;
-+ UInt32 lenLimit;
-+
-+ UInt32 cyclicBufferPos;
-+ UInt32 cyclicBufferSize; /* it must be = (historySize + 1) */
-+
-+ UInt32 matchMaxLen;
-+ CLzRef *hash;
-+ CLzRef *son;
-+ UInt32 hashMask;
-+ UInt32 cutValue;
-+
-+ Byte *bufferBase;
-+ ISeqInStream *stream;
-+ int streamEndWasReached;
-+
-+ UInt32 blockSize;
-+ UInt32 keepSizeBefore;
-+ UInt32 keepSizeAfter;
-+
-+ UInt32 numHashBytes;
-+ int directInput;
-+ size_t directInputRem;
-+ int btMode;
-+ int bigHash;
-+ UInt32 historySize;
-+ UInt32 fixedHashSize;
-+ UInt32 hashSizeSum;
-+ UInt32 numSons;
-+ SRes result;
-+ UInt32 crc[256];
-+} CMatchFinder;
-+
-+#define Inline_MatchFinder_GetPointerToCurrentPos(p) ((p)->buffer)
-+#define Inline_MatchFinder_GetIndexByte(p, index) ((p)->buffer[(Int32)(index)])
-+
-+#define Inline_MatchFinder_GetNumAvailableBytes(p) ((p)->streamPos - (p)->pos)
-+
-+int MatchFinder_NeedMove(CMatchFinder *p);
-+Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p);
-+void MatchFinder_MoveBlock(CMatchFinder *p);
-+void MatchFinder_ReadIfRequired(CMatchFinder *p);
-+
-+void MatchFinder_Construct(CMatchFinder *p);
-+
-+/* Conditions:
-+ historySize <= 3 GB
-+ keepAddBufferBefore + matchMaxLen + keepAddBufferAfter < 511MB
-+*/
-+int MatchFinder_Create(CMatchFinder *p, UInt32 historySize,
-+ UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter,
-+ ISzAlloc *alloc);
-+void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc);
-+void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems);
-+void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue);
-+
-+UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *buffer, CLzRef *son,
-+ UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 _cutValue,
-+ UInt32 *distances, UInt32 maxLen);
-+
-+/*
-+Conditions:
-+ Mf_GetNumAvailableBytes_Func must be called before each Mf_GetMatchLen_Func.
-+ Mf_GetPointerToCurrentPos_Func's result must be used only before any other function
-+*/
-+
-+typedef void (*Mf_Init_Func)(void *object);
-+typedef Byte (*Mf_GetIndexByte_Func)(void *object, Int32 index);
-+typedef UInt32 (*Mf_GetNumAvailableBytes_Func)(void *object);
-+typedef const Byte * (*Mf_GetPointerToCurrentPos_Func)(void *object);
-+typedef UInt32 (*Mf_GetMatches_Func)(void *object, UInt32 *distances);
-+typedef void (*Mf_Skip_Func)(void *object, UInt32);
-+
-+typedef struct _IMatchFinder
-+{
-+ Mf_Init_Func Init;
-+ Mf_GetIndexByte_Func GetIndexByte;
-+ Mf_GetNumAvailableBytes_Func GetNumAvailableBytes;
-+ Mf_GetPointerToCurrentPos_Func GetPointerToCurrentPos;
-+ Mf_GetMatches_Func GetMatches;
-+ Mf_Skip_Func Skip;
-+} IMatchFinder;
-+
-+void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable);
-+
-+void MatchFinder_Init(CMatchFinder *p);
-+UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
-+UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances);
-+void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
-+void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num);
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/include/linux/lzma/LzHash.h
-@@ -0,0 +1,54 @@
-+/* LzHash.h -- HASH functions for LZ algorithms
-+2009-02-07 : Igor Pavlov : Public domain */
-+
-+#ifndef __LZ_HASH_H
-+#define __LZ_HASH_H
-+
-+#define kHash2Size (1 << 10)
-+#define kHash3Size (1 << 16)
-+#define kHash4Size (1 << 20)
-+
-+#define kFix3HashSize (kHash2Size)
-+#define kFix4HashSize (kHash2Size + kHash3Size)
-+#define kFix5HashSize (kHash2Size + kHash3Size + kHash4Size)
-+
-+#define HASH2_CALC hashValue = cur[0] | ((UInt32)cur[1] << 8);
-+
-+#define HASH3_CALC { \
-+ UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
-+ hash2Value = temp & (kHash2Size - 1); \
-+ hashValue = (temp ^ ((UInt32)cur[2] << 8)) & p->hashMask; }
-+
-+#define HASH4_CALC { \
-+ UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
-+ hash2Value = temp & (kHash2Size - 1); \
-+ hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
-+ hashValue = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)) & p->hashMask; }
-+
-+#define HASH5_CALC { \
-+ UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
-+ hash2Value = temp & (kHash2Size - 1); \
-+ hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
-+ hash4Value = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)); \
-+ hashValue = (hash4Value ^ (p->crc[cur[4]] << 3)) & p->hashMask; \
-+ hash4Value &= (kHash4Size - 1); }
-+
-+/* #define HASH_ZIP_CALC hashValue = ((cur[0] | ((UInt32)cur[1] << 8)) ^ p->crc[cur[2]]) & 0xFFFF; */
-+#define HASH_ZIP_CALC hashValue = ((cur[2] | ((UInt32)cur[0] << 8)) ^ p->crc[cur[1]]) & 0xFFFF;
-+
-+
-+#define MT_HASH2_CALC \
-+ hash2Value = (p->crc[cur[0]] ^ cur[1]) & (kHash2Size - 1);
-+
-+#define MT_HASH3_CALC { \
-+ UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
-+ hash2Value = temp & (kHash2Size - 1); \
-+ hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); }
-+
-+#define MT_HASH4_CALC { \
-+ UInt32 temp = p->crc[cur[0]] ^ cur[1]; \
-+ hash2Value = temp & (kHash2Size - 1); \
-+ hash3Value = (temp ^ ((UInt32)cur[2] << 8)) & (kHash3Size - 1); \
-+ hash4Value = (temp ^ ((UInt32)cur[2] << 8) ^ (p->crc[cur[3]] << 5)) & (kHash4Size - 1); }
-+
-+#endif
---- /dev/null
-+++ b/include/linux/lzma/LzmaDec.h
-@@ -0,0 +1,231 @@
-+/* LzmaDec.h -- LZMA Decoder
-+2009-02-07 : Igor Pavlov : Public domain */
-+
-+#ifndef __LZMA_DEC_H
-+#define __LZMA_DEC_H
-+
-+#include "Types.h"
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+/* #define _LZMA_PROB32 */
-+/* _LZMA_PROB32 can increase the speed on some CPUs,
-+ but memory usage for CLzmaDec::probs will be doubled in that case */
-+
-+#ifdef _LZMA_PROB32
-+#define CLzmaProb UInt32
-+#else
-+#define CLzmaProb UInt16
-+#endif
-+
-+
-+/* ---------- LZMA Properties ---------- */
-+
-+#define LZMA_PROPS_SIZE 5
-+
-+typedef struct _CLzmaProps
-+{
-+ unsigned lc, lp, pb;
-+ UInt32 dicSize;
-+} CLzmaProps;
-+
-+/* LzmaProps_Decode - decodes properties
-+Returns:
-+ SZ_OK
-+ SZ_ERROR_UNSUPPORTED - Unsupported properties
-+*/
-+
-+SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size);
-+
-+
-+/* ---------- LZMA Decoder state ---------- */
-+
-+/* LZMA_REQUIRED_INPUT_MAX = number of required input bytes for worst case.
-+ Num bits = log2((2^11 / 31) ^ 22) + 26 < 134 + 26 = 160; */
-+
-+#define LZMA_REQUIRED_INPUT_MAX 20
-+
-+typedef struct
-+{
-+ CLzmaProps prop;
-+ CLzmaProb *probs;
-+ Byte *dic;
-+ const Byte *buf;
-+ UInt32 range, code;
-+ SizeT dicPos;
-+ SizeT dicBufSize;
-+ UInt32 processedPos;
-+ UInt32 checkDicSize;
-+ unsigned state;
-+ UInt32 reps[4];
-+ unsigned remainLen;
-+ int needFlush;
-+ int needInitState;
-+ UInt32 numProbs;
-+ unsigned tempBufSize;
-+ Byte tempBuf[LZMA_REQUIRED_INPUT_MAX];
-+} CLzmaDec;
-+
-+#define LzmaDec_Construct(p) { (p)->dic = 0; (p)->probs = 0; }
-+
-+void LzmaDec_Init(CLzmaDec *p);
-+
-+/* There are two types of LZMA streams:
-+ 0) Stream with end mark. That end mark adds about 6 bytes to compressed size.
-+ 1) Stream without end mark. You must know exact uncompressed size to decompress such stream. */
-+
-+typedef enum
-+{
-+ LZMA_FINISH_ANY, /* finish at any point */
-+ LZMA_FINISH_END /* block must be finished at the end */
-+} ELzmaFinishMode;
-+
-+/* ELzmaFinishMode has meaning only if the decoding reaches output limit !!!
-+
-+ You must use LZMA_FINISH_END, when you know that current output buffer
-+ covers last bytes of block. In other cases you must use LZMA_FINISH_ANY.
-+
-+ If LZMA decoder sees end marker before reaching output limit, it returns SZ_OK,
-+ and output value of destLen will be less than output buffer size limit.
-+ You can check status result also.
-+
-+ You can use multiple checks to test data integrity after full decompression:
-+ 1) Check Result and "status" variable.
-+ 2) Check that output(destLen) = uncompressedSize, if you know real uncompressedSize.
-+ 3) Check that output(srcLen) = compressedSize, if you know real compressedSize.
-+ You must use correct finish mode in that case. */
-+
-+typedef enum
-+{
-+ LZMA_STATUS_NOT_SPECIFIED, /* use main error code instead */
-+ LZMA_STATUS_FINISHED_WITH_MARK, /* stream was finished with end mark. */
-+ LZMA_STATUS_NOT_FINISHED, /* stream was not finished */
-+ LZMA_STATUS_NEEDS_MORE_INPUT, /* you must provide more input bytes */
-+ LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK /* there is probability that stream was finished without end mark */
-+} ELzmaStatus;
-+
-+/* ELzmaStatus is used only as output value for function call */
-+
-+
-+/* ---------- Interfaces ---------- */
-+
-+/* There are 3 levels of interfaces:
-+ 1) Dictionary Interface
-+ 2) Buffer Interface
-+ 3) One Call Interface
-+ You can select any of these interfaces, but don't mix functions from different
-+ groups for same object. */
-+
-+
-+/* There are two variants to allocate state for Dictionary Interface:
-+ 1) LzmaDec_Allocate / LzmaDec_Free
-+ 2) LzmaDec_AllocateProbs / LzmaDec_FreeProbs
-+ You can use variant 2, if you set dictionary buffer manually.
-+ For Buffer Interface you must always use variant 1.
-+
-+LzmaDec_Allocate* can return:
-+ SZ_OK
-+ SZ_ERROR_MEM - Memory allocation error
-+ SZ_ERROR_UNSUPPORTED - Unsupported properties
-+*/
-+
-+SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc);
-+void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc);
-+
-+SRes LzmaDec_Allocate(CLzmaDec *state, const Byte *prop, unsigned propsSize, ISzAlloc *alloc);
-+void LzmaDec_Free(CLzmaDec *state, ISzAlloc *alloc);
-+
-+/* ---------- Dictionary Interface ---------- */
-+
-+/* You can use it, if you want to eliminate the overhead for data copying from
-+ dictionary to some other external buffer.
-+ You must work with CLzmaDec variables directly in this interface.
-+
-+ STEPS:
-+ LzmaDec_Constr()
-+ LzmaDec_Allocate()
-+ for (each new stream)
-+ {
-+ LzmaDec_Init()
-+ while (it needs more decompression)
-+ {
-+ LzmaDec_DecodeToDic()
-+ use data from CLzmaDec::dic and update CLzmaDec::dicPos
-+ }
-+ }
-+ LzmaDec_Free()
-+*/
-+
-+/* LzmaDec_DecodeToDic
-+
-+ The decoding to internal dictionary buffer (CLzmaDec::dic).
-+ You must manually update CLzmaDec::dicPos, if it reaches CLzmaDec::dicBufSize !!!
-+
-+finishMode:
-+ It has meaning only if the decoding reaches output limit (dicLimit).
-+ LZMA_FINISH_ANY - Decode just dicLimit bytes.
-+ LZMA_FINISH_END - Stream must be finished after dicLimit.
-+
-+Returns:
-+ SZ_OK
-+ status:
-+ LZMA_STATUS_FINISHED_WITH_MARK
-+ LZMA_STATUS_NOT_FINISHED
-+ LZMA_STATUS_NEEDS_MORE_INPUT
-+ LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
-+ SZ_ERROR_DATA - Data error
-+*/
-+
-+SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit,
-+ const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
-+
-+
-+/* ---------- Buffer Interface ---------- */
-+
-+/* It's zlib-like interface.
-+ See LzmaDec_DecodeToDic description for information about STEPS and return results,
-+ but you must use LzmaDec_DecodeToBuf instead of LzmaDec_DecodeToDic and you don't need
-+ to work with CLzmaDec variables manually.
-+
-+finishMode:
-+ It has meaning only if the decoding reaches output limit (*destLen).
-+ LZMA_FINISH_ANY - Decode just destLen bytes.
-+ LZMA_FINISH_END - Stream must be finished after (*destLen).
-+*/
-+
-+SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen,
-+ const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status);
-+
-+
-+/* ---------- One Call Interface ---------- */
-+
-+/* LzmaDecode
-+
-+finishMode:
-+ It has meaning only if the decoding reaches output limit (*destLen).
-+ LZMA_FINISH_ANY - Decode just destLen bytes.
-+ LZMA_FINISH_END - Stream must be finished after (*destLen).
-+
-+Returns:
-+ SZ_OK
-+ status:
-+ LZMA_STATUS_FINISHED_WITH_MARK
-+ LZMA_STATUS_NOT_FINISHED
-+ LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
-+ SZ_ERROR_DATA - Data error
-+ SZ_ERROR_MEM - Memory allocation error
-+ SZ_ERROR_UNSUPPORTED - Unsupported properties
-+ SZ_ERROR_INPUT_EOF - It needs more bytes in input buffer (src).
-+*/
-+
-+SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
-+ const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
-+ ELzmaStatus *status, ISzAlloc *alloc);
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/include/linux/lzma/LzmaEnc.h
-@@ -0,0 +1,80 @@
-+/* LzmaEnc.h -- LZMA Encoder
-+2009-02-07 : Igor Pavlov : Public domain */
-+
-+#ifndef __LZMA_ENC_H
-+#define __LZMA_ENC_H
-+
-+#include "Types.h"
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+#define LZMA_PROPS_SIZE 5
-+
-+typedef struct _CLzmaEncProps
-+{
-+ int level; /* 0 <= level <= 9 */
-+ UInt32 dictSize; /* (1 << 12) <= dictSize <= (1 << 27) for 32-bit version
-+ (1 << 12) <= dictSize <= (1 << 30) for 64-bit version
-+ default = (1 << 24) */
-+ int lc; /* 0 <= lc <= 8, default = 3 */
-+ int lp; /* 0 <= lp <= 4, default = 0 */
-+ int pb; /* 0 <= pb <= 4, default = 2 */
-+ int algo; /* 0 - fast, 1 - normal, default = 1 */
-+ int fb; /* 5 <= fb <= 273, default = 32 */
-+ int btMode; /* 0 - hashChain Mode, 1 - binTree mode - normal, default = 1 */
-+ int numHashBytes; /* 2, 3 or 4, default = 4 */
-+ UInt32 mc; /* 1 <= mc <= (1 << 30), default = 32 */
-+ unsigned writeEndMark; /* 0 - do not write EOPM, 1 - write EOPM, default = 0 */
-+ int numThreads; /* 1 or 2, default = 2 */
-+} CLzmaEncProps;
-+
-+void LzmaEncProps_Init(CLzmaEncProps *p);
-+void LzmaEncProps_Normalize(CLzmaEncProps *p);
-+UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2);
-+
-+
-+/* ---------- CLzmaEncHandle Interface ---------- */
-+
-+/* LzmaEnc_* functions can return the following exit codes:
-+Returns:
-+ SZ_OK - OK
-+ SZ_ERROR_MEM - Memory allocation error
-+ SZ_ERROR_PARAM - Incorrect paramater in props
-+ SZ_ERROR_WRITE - Write callback error.
-+ SZ_ERROR_PROGRESS - some break from progress callback
-+ SZ_ERROR_THREAD - errors in multithreading functions (only for Mt version)
-+*/
-+
-+typedef void * CLzmaEncHandle;
-+
-+CLzmaEncHandle LzmaEnc_Create(ISzAlloc *alloc);
-+void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig);
-+SRes LzmaEnc_SetProps(CLzmaEncHandle p, const CLzmaEncProps *props);
-+SRes LzmaEnc_WriteProperties(CLzmaEncHandle p, Byte *properties, SizeT *size);
-+SRes LzmaEnc_Encode(CLzmaEncHandle p, ISeqOutStream *outStream, ISeqInStream *inStream,
-+ ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
-+SRes LzmaEnc_MemEncode(CLzmaEncHandle p, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
-+ int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
-+
-+/* ---------- One Call Interface ---------- */
-+
-+/* LzmaEncode
-+Return code:
-+ SZ_OK - OK
-+ SZ_ERROR_MEM - Memory allocation error
-+ SZ_ERROR_PARAM - Incorrect paramater
-+ SZ_ERROR_OUTPUT_EOF - output buffer overflow
-+ SZ_ERROR_THREAD - errors in multithreading functions (only for Mt version)
-+*/
-+
-+SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
-+ const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
-+ ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig);
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/include/linux/lzma/Types.h
-@@ -0,0 +1,226 @@
-+/* Types.h -- Basic types
-+2009-11-23 : Igor Pavlov : Public domain */
-+
-+#ifndef __7Z_TYPES_H
-+#define __7Z_TYPES_H
-+
-+#include <stddef.h>
-+
-+#ifdef _WIN32
-+#include <windows.h>
-+#endif
-+
-+#ifndef EXTERN_C_BEGIN
-+#ifdef __cplusplus
-+#define EXTERN_C_BEGIN extern "C" {
-+#define EXTERN_C_END }
-+#else
-+#define EXTERN_C_BEGIN
-+#define EXTERN_C_END
-+#endif
-+#endif
-+
-+EXTERN_C_BEGIN
-+
-+#define SZ_OK 0
-+
-+#define SZ_ERROR_DATA 1
-+#define SZ_ERROR_MEM 2
-+#define SZ_ERROR_CRC 3
-+#define SZ_ERROR_UNSUPPORTED 4
-+#define SZ_ERROR_PARAM 5
-+#define SZ_ERROR_INPUT_EOF 6
-+#define SZ_ERROR_OUTPUT_EOF 7
-+#define SZ_ERROR_READ 8
-+#define SZ_ERROR_WRITE 9
-+#define SZ_ERROR_PROGRESS 10
-+#define SZ_ERROR_FAIL 11
-+#define SZ_ERROR_THREAD 12
-+
-+#define SZ_ERROR_ARCHIVE 16
-+#define SZ_ERROR_NO_ARCHIVE 17
-+
-+typedef int SRes;
-+
-+#ifdef _WIN32
-+typedef DWORD WRes;
-+#else
-+typedef int WRes;
-+#endif
-+
-+#ifndef RINOK
-+#define RINOK(x) { int __result__ = (x); if (__result__ != 0) return __result__; }
-+#endif
-+
-+typedef unsigned char Byte;
-+typedef short Int16;
-+typedef unsigned short UInt16;
-+
-+#ifdef _LZMA_UINT32_IS_ULONG
-+typedef long Int32;
-+typedef unsigned long UInt32;
-+#else
-+typedef int Int32;
-+typedef unsigned int UInt32;
-+#endif
-+
-+#ifdef _SZ_NO_INT_64
-+
-+/* define _SZ_NO_INT_64, if your compiler doesn't support 64-bit integers.
-+ NOTES: Some code will work incorrectly in that case! */
-+
-+typedef long Int64;
-+typedef unsigned long UInt64;
-+
-+#else
-+
-+#if defined(_MSC_VER) || defined(__BORLANDC__)
-+typedef __int64 Int64;
-+typedef unsigned __int64 UInt64;
-+#else
-+typedef long long int Int64;
-+typedef unsigned long long int UInt64;
-+#endif
-+
-+#endif
-+
-+#ifdef _LZMA_NO_SYSTEM_SIZE_T
-+typedef UInt32 SizeT;
-+#else
-+typedef size_t SizeT;
-+#endif
-+
-+typedef int Bool;
-+#define True 1
-+#define False 0
-+
-+
-+#ifdef _WIN32
-+#define MY_STD_CALL __stdcall
-+#else
-+#define MY_STD_CALL
-+#endif
-+
-+#ifdef _MSC_VER
-+
-+#if _MSC_VER >= 1300
-+#define MY_NO_INLINE __declspec(noinline)
-+#else
-+#define MY_NO_INLINE
-+#endif
-+
-+#define MY_CDECL __cdecl
-+#define MY_FAST_CALL __fastcall
-+
-+#else
-+
-+#define MY_CDECL
-+#define MY_FAST_CALL
-+
-+#endif
-+
-+
-+/* The following interfaces use first parameter as pointer to structure */
-+
-+typedef struct
-+{
-+ SRes (*Read)(void *p, void *buf, size_t *size);
-+ /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream.
-+ (output(*size) < input(*size)) is allowed */
-+} ISeqInStream;
-+
-+/* it can return SZ_ERROR_INPUT_EOF */
-+SRes SeqInStream_Read(ISeqInStream *stream, void *buf, size_t size);
-+SRes SeqInStream_Read2(ISeqInStream *stream, void *buf, size_t size, SRes errorType);
-+SRes SeqInStream_ReadByte(ISeqInStream *stream, Byte *buf);
-+
-+typedef struct
-+{
-+ size_t (*Write)(void *p, const void *buf, size_t size);
-+ /* Returns: result - the number of actually written bytes.
-+ (result < size) means error */
-+} ISeqOutStream;
-+
-+typedef enum
-+{
-+ SZ_SEEK_SET = 0,
-+ SZ_SEEK_CUR = 1,
-+ SZ_SEEK_END = 2
-+} ESzSeek;
-+
-+typedef struct
-+{
-+ SRes (*Read)(void *p, void *buf, size_t *size); /* same as ISeqInStream::Read */
-+ SRes (*Seek)(void *p, Int64 *pos, ESzSeek origin);
-+} ISeekInStream;
-+
-+typedef struct
-+{
-+ SRes (*Look)(void *p, void **buf, size_t *size);
-+ /* if (input(*size) != 0 && output(*size) == 0) means end_of_stream.
-+ (output(*size) > input(*size)) is not allowed
-+ (output(*size) < input(*size)) is allowed */
-+ SRes (*Skip)(void *p, size_t offset);
-+ /* offset must be <= output(*size) of Look */
-+
-+ SRes (*Read)(void *p, void *buf, size_t *size);
-+ /* reads directly (without buffer). It's same as ISeqInStream::Read */
-+ SRes (*Seek)(void *p, Int64 *pos, ESzSeek origin);
-+} ILookInStream;
-+
-+SRes LookInStream_LookRead(ILookInStream *stream, void *buf, size_t *size);
-+SRes LookInStream_SeekTo(ILookInStream *stream, UInt64 offset);
-+
-+/* reads via ILookInStream::Read */
-+SRes LookInStream_Read2(ILookInStream *stream, void *buf, size_t size, SRes errorType);
-+SRes LookInStream_Read(ILookInStream *stream, void *buf, size_t size);
-+
-+#define LookToRead_BUF_SIZE (1 << 14)
-+
-+typedef struct
-+{
-+ ILookInStream s;
-+ ISeekInStream *realStream;
-+ size_t pos;
-+ size_t size;
-+ Byte buf[LookToRead_BUF_SIZE];
-+} CLookToRead;
-+
-+void LookToRead_CreateVTable(CLookToRead *p, int lookahead);
-+void LookToRead_Init(CLookToRead *p);
-+
-+typedef struct
-+{
-+ ISeqInStream s;
-+ ILookInStream *realStream;
-+} CSecToLook;
-+
-+void SecToLook_CreateVTable(CSecToLook *p);
-+
-+typedef struct
-+{
-+ ISeqInStream s;
-+ ILookInStream *realStream;
-+} CSecToRead;
-+
-+void SecToRead_CreateVTable(CSecToRead *p);
-+
-+typedef struct
-+{
-+ SRes (*Progress)(void *p, UInt64 inSize, UInt64 outSize);
-+ /* Returns: result. (result != SZ_OK) means break.
-+ Value (UInt64)(Int64)-1 for size means unknown value. */
-+} ICompressProgress;
-+
-+typedef struct
-+{
-+ void *(*Alloc)(void *p, size_t size);
-+ void (*Free)(void *p, void *address); /* address can be 0 */
-+} ISzAlloc;
-+
-+#define IAlloc_Alloc(p, size) (p)->Alloc((p), size)
-+#define IAlloc_Free(p, a) (p)->Free((p), a)
-+
-+EXTERN_C_END
-+
-+#endif
---- a/include/uapi/linux/jffs2.h
-+++ b/include/uapi/linux/jffs2.h
-@@ -46,6 +46,7 @@
- #define JFFS2_COMPR_DYNRUBIN 0x05
- #define JFFS2_COMPR_ZLIB 0x06
- #define JFFS2_COMPR_LZO 0x07
-+#define JFFS2_COMPR_LZMA 0x08
- /* Compatibility flags. */
- #define JFFS2_COMPAT_MASK 0xc000 /* What do to if an unknown nodetype is found */
- #define JFFS2_NODE_ACCURATE 0x2000
---- a/lib/Kconfig
-+++ b/lib/Kconfig
-@@ -278,6 +278,12 @@ config ZSTD_DECOMPRESS
-
- source "lib/xz/Kconfig"
-
-+config LZMA_COMPRESS
-+ tristate
-+
-+config LZMA_DECOMPRESS
-+ tristate
-+
- #
- # These all provide a common interface (hence the apparent duplication with
- # ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.)
---- a/lib/Makefile
-+++ b/lib/Makefile
-@@ -3,6 +3,16 @@
- # Makefile for some libs needed in the kernel.
- #
-
-+ifdef CONFIG_JFFS2_ZLIB
-+ CONFIG_ZLIB_INFLATE:=y
-+ CONFIG_ZLIB_DEFLATE:=y
-+endif
-+
-+ifdef CONFIG_JFFS2_LZMA
-+ CONFIG_LZMA_DECOMPRESS:=y
-+ CONFIG_LZMA_COMPRESS:=y
-+endif
-+
- ifdef CONFIG_FUNCTION_TRACER
- ORIG_CFLAGS := $(KBUILD_CFLAGS)
- KBUILD_CFLAGS = $(subst $(CC_FLAGS_FTRACE),,$(ORIG_CFLAGS))
-@@ -139,6 +149,8 @@ obj-$(CONFIG_ZSTD_COMPRESS) += zstd/
- obj-$(CONFIG_ZSTD_DECOMPRESS) += zstd/
- obj-$(CONFIG_XZ_DEC) += xz/
- obj-$(CONFIG_RAID6_PQ) += raid6/
-+obj-$(CONFIG_LZMA_COMPRESS) += lzma/
-+obj-$(CONFIG_LZMA_DECOMPRESS) += lzma/
-
- lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o
- lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o
---- /dev/null
-+++ b/lib/lzma/LzFind.c
-@@ -0,0 +1,761 @@
-+/* LzFind.c -- Match finder for LZ algorithms
-+2009-04-22 : Igor Pavlov : Public domain */
-+
-+#include <string.h>
-+
-+#include "LzFind.h"
-+#include "LzHash.h"
-+
-+#define kEmptyHashValue 0
-+#define kMaxValForNormalize ((UInt32)0xFFFFFFFF)
-+#define kNormalizeStepMin (1 << 10) /* it must be power of 2 */
-+#define kNormalizeMask (~(kNormalizeStepMin - 1))
-+#define kMaxHistorySize ((UInt32)3 << 30)
-+
-+#define kStartMaxLen 3
-+
-+static void LzInWindow_Free(CMatchFinder *p, ISzAlloc *alloc)
-+{
-+ if (!p->directInput)
-+ {
-+ alloc->Free(alloc, p->bufferBase);
-+ p->bufferBase = 0;
-+ }
-+}
-+
-+/* keepSizeBefore + keepSizeAfter + keepSizeReserv must be < 4G) */
-+
-+static int LzInWindow_Create(CMatchFinder *p, UInt32 keepSizeReserv, ISzAlloc *alloc)
-+{
-+ UInt32 blockSize = p->keepSizeBefore + p->keepSizeAfter + keepSizeReserv;
-+ if (p->directInput)
-+ {
-+ p->blockSize = blockSize;
-+ return 1;
-+ }
-+ if (p->bufferBase == 0 || p->blockSize != blockSize)
-+ {
-+ LzInWindow_Free(p, alloc);
-+ p->blockSize = blockSize;
-+ p->bufferBase = (Byte *)alloc->Alloc(alloc, (size_t)blockSize);
-+ }
-+ return (p->bufferBase != 0);
-+}
-+
-+Byte *MatchFinder_GetPointerToCurrentPos(CMatchFinder *p) { return p->buffer; }
-+Byte MatchFinder_GetIndexByte(CMatchFinder *p, Int32 index) { return p->buffer[index]; }
-+
-+UInt32 MatchFinder_GetNumAvailableBytes(CMatchFinder *p) { return p->streamPos - p->pos; }
-+
-+void MatchFinder_ReduceOffsets(CMatchFinder *p, UInt32 subValue)
-+{
-+ p->posLimit -= subValue;
-+ p->pos -= subValue;
-+ p->streamPos -= subValue;
-+}
-+
-+static void MatchFinder_ReadBlock(CMatchFinder *p)
-+{
-+ if (p->streamEndWasReached || p->result != SZ_OK)
-+ return;
-+ if (p->directInput)
-+ {
-+ UInt32 curSize = 0xFFFFFFFF - p->streamPos;
-+ if (curSize > p->directInputRem)
-+ curSize = (UInt32)p->directInputRem;
-+ p->directInputRem -= curSize;
-+ p->streamPos += curSize;
-+ if (p->directInputRem == 0)
-+ p->streamEndWasReached = 1;
-+ return;
-+ }
-+ for (;;)
-+ {
-+ Byte *dest = p->buffer + (p->streamPos - p->pos);
-+ size_t size = (p->bufferBase + p->blockSize - dest);
-+ if (size == 0)
-+ return;
-+ p->result = p->stream->Read(p->stream, dest, &size);
-+ if (p->result != SZ_OK)
-+ return;
-+ if (size == 0)
-+ {
-+ p->streamEndWasReached = 1;
-+ return;
-+ }
-+ p->streamPos += (UInt32)size;
-+ if (p->streamPos - p->pos > p->keepSizeAfter)
-+ return;
-+ }
-+}
-+
-+void MatchFinder_MoveBlock(CMatchFinder *p)
-+{
-+ memmove(p->bufferBase,
-+ p->buffer - p->keepSizeBefore,
-+ (size_t)(p->streamPos - p->pos + p->keepSizeBefore));
-+ p->buffer = p->bufferBase + p->keepSizeBefore;
-+}
-+
-+int MatchFinder_NeedMove(CMatchFinder *p)
-+{
-+ if (p->directInput)
-+ return 0;
-+ /* if (p->streamEndWasReached) return 0; */
-+ return ((size_t)(p->bufferBase + p->blockSize - p->buffer) <= p->keepSizeAfter);
-+}
-+
-+void MatchFinder_ReadIfRequired(CMatchFinder *p)
-+{
-+ if (p->streamEndWasReached)
-+ return;
-+ if (p->keepSizeAfter >= p->streamPos - p->pos)
-+ MatchFinder_ReadBlock(p);
-+}
-+
-+static void MatchFinder_CheckAndMoveAndRead(CMatchFinder *p)
-+{
-+ if (MatchFinder_NeedMove(p))
-+ MatchFinder_MoveBlock(p);
-+ MatchFinder_ReadBlock(p);
-+}
-+
-+static void MatchFinder_SetDefaultSettings(CMatchFinder *p)
-+{
-+ p->cutValue = 32;
-+ p->btMode = 1;
-+ p->numHashBytes = 4;
-+ p->bigHash = 0;
-+}
-+
-+#define kCrcPoly 0xEDB88320
-+
-+void MatchFinder_Construct(CMatchFinder *p)
-+{
-+ UInt32 i;
-+ p->bufferBase = 0;
-+ p->directInput = 0;
-+ p->hash = 0;
-+ MatchFinder_SetDefaultSettings(p);
-+
-+ for (i = 0; i < 256; i++)
-+ {
-+ UInt32 r = i;
-+ int j;
-+ for (j = 0; j < 8; j++)
-+ r = (r >> 1) ^ (kCrcPoly & ~((r & 1) - 1));
-+ p->crc[i] = r;
-+ }
-+}
-+
-+static void MatchFinder_FreeThisClassMemory(CMatchFinder *p, ISzAlloc *alloc)
-+{
-+ alloc->Free(alloc, p->hash);
-+ p->hash = 0;
-+}
-+
-+void MatchFinder_Free(CMatchFinder *p, ISzAlloc *alloc)
-+{
-+ MatchFinder_FreeThisClassMemory(p, alloc);
-+ LzInWindow_Free(p, alloc);
-+}
-+
-+static CLzRef* AllocRefs(UInt32 num, ISzAlloc *alloc)
-+{
-+ size_t sizeInBytes = (size_t)num * sizeof(CLzRef);
-+ if (sizeInBytes / sizeof(CLzRef) != num)
-+ return 0;
-+ return (CLzRef *)alloc->Alloc(alloc, sizeInBytes);
-+}
-+
-+int MatchFinder_Create(CMatchFinder *p, UInt32 historySize,
-+ UInt32 keepAddBufferBefore, UInt32 matchMaxLen, UInt32 keepAddBufferAfter,
-+ ISzAlloc *alloc)
-+{
-+ UInt32 sizeReserv;
-+ if (historySize > kMaxHistorySize)
-+ {
-+ MatchFinder_Free(p, alloc);
-+ return 0;
-+ }
-+ sizeReserv = historySize >> 1;
-+ if (historySize > ((UInt32)2 << 30))
-+ sizeReserv = historySize >> 2;
-+ sizeReserv += (keepAddBufferBefore + matchMaxLen + keepAddBufferAfter) / 2 + (1 << 19);
-+
-+ p->keepSizeBefore = historySize + keepAddBufferBefore + 1;
-+ p->keepSizeAfter = matchMaxLen + keepAddBufferAfter;
-+ /* we need one additional byte, since we use MoveBlock after pos++ and before dictionary using */
-+ if (LzInWindow_Create(p, sizeReserv, alloc))
-+ {
-+ UInt32 newCyclicBufferSize = historySize + 1;
-+ UInt32 hs;
-+ p->matchMaxLen = matchMaxLen;
-+ {
-+ p->fixedHashSize = 0;
-+ if (p->numHashBytes == 2)
-+ hs = (1 << 16) - 1;
-+ else
-+ {
-+ hs = historySize - 1;
-+ hs |= (hs >> 1);
-+ hs |= (hs >> 2);
-+ hs |= (hs >> 4);
-+ hs |= (hs >> 8);
-+ hs >>= 1;
-+ hs |= 0xFFFF; /* don't change it! It's required for Deflate */
-+ if (hs > (1 << 24))
-+ {
-+ if (p->numHashBytes == 3)
-+ hs = (1 << 24) - 1;
-+ else
-+ hs >>= 1;
-+ }
-+ }
-+ p->hashMask = hs;
-+ hs++;
-+ if (p->numHashBytes > 2) p->fixedHashSize += kHash2Size;
-+ if (p->numHashBytes > 3) p->fixedHashSize += kHash3Size;
-+ if (p->numHashBytes > 4) p->fixedHashSize += kHash4Size;
-+ hs += p->fixedHashSize;
-+ }
-+
-+ {
-+ UInt32 prevSize = p->hashSizeSum + p->numSons;
-+ UInt32 newSize;
-+ p->historySize = historySize;
-+ p->hashSizeSum = hs;
-+ p->cyclicBufferSize = newCyclicBufferSize;
-+ p->numSons = (p->btMode ? newCyclicBufferSize * 2 : newCyclicBufferSize);
-+ newSize = p->hashSizeSum + p->numSons;
-+ if (p->hash != 0 && prevSize == newSize)
-+ return 1;
-+ MatchFinder_FreeThisClassMemory(p, alloc);
-+ p->hash = AllocRefs(newSize, alloc);
-+ if (p->hash != 0)
-+ {
-+ p->son = p->hash + p->hashSizeSum;
-+ return 1;
-+ }
-+ }
-+ }
-+ MatchFinder_Free(p, alloc);
-+ return 0;
-+}
-+
-+static void MatchFinder_SetLimits(CMatchFinder *p)
-+{
-+ UInt32 limit = kMaxValForNormalize - p->pos;
-+ UInt32 limit2 = p->cyclicBufferSize - p->cyclicBufferPos;
-+ if (limit2 < limit)
-+ limit = limit2;
-+ limit2 = p->streamPos - p->pos;
-+ if (limit2 <= p->keepSizeAfter)
-+ {
-+ if (limit2 > 0)
-+ limit2 = 1;
-+ }
-+ else
-+ limit2 -= p->keepSizeAfter;
-+ if (limit2 < limit)
-+ limit = limit2;
-+ {
-+ UInt32 lenLimit = p->streamPos - p->pos;
-+ if (lenLimit > p->matchMaxLen)
-+ lenLimit = p->matchMaxLen;
-+ p->lenLimit = lenLimit;
-+ }
-+ p->posLimit = p->pos + limit;
-+}
-+
-+void MatchFinder_Init(CMatchFinder *p)
-+{
-+ UInt32 i;
-+ for (i = 0; i < p->hashSizeSum; i++)
-+ p->hash[i] = kEmptyHashValue;
-+ p->cyclicBufferPos = 0;
-+ p->buffer = p->bufferBase;
-+ p->pos = p->streamPos = p->cyclicBufferSize;
-+ p->result = SZ_OK;
-+ p->streamEndWasReached = 0;
-+ MatchFinder_ReadBlock(p);
-+ MatchFinder_SetLimits(p);
-+}
-+
-+static UInt32 MatchFinder_GetSubValue(CMatchFinder *p)
-+{
-+ return (p->pos - p->historySize - 1) & kNormalizeMask;
-+}
-+
-+void MatchFinder_Normalize3(UInt32 subValue, CLzRef *items, UInt32 numItems)
-+{
-+ UInt32 i;
-+ for (i = 0; i < numItems; i++)
-+ {
-+ UInt32 value = items[i];
-+ if (value <= subValue)
-+ value = kEmptyHashValue;
-+ else
-+ value -= subValue;
-+ items[i] = value;
-+ }
-+}
-+
-+static void MatchFinder_Normalize(CMatchFinder *p)
-+{
-+ UInt32 subValue = MatchFinder_GetSubValue(p);
-+ MatchFinder_Normalize3(subValue, p->hash, p->hashSizeSum + p->numSons);
-+ MatchFinder_ReduceOffsets(p, subValue);
-+}
-+
-+static void MatchFinder_CheckLimits(CMatchFinder *p)
-+{
-+ if (p->pos == kMaxValForNormalize)
-+ MatchFinder_Normalize(p);
-+ if (!p->streamEndWasReached && p->keepSizeAfter == p->streamPos - p->pos)
-+ MatchFinder_CheckAndMoveAndRead(p);
-+ if (p->cyclicBufferPos == p->cyclicBufferSize)
-+ p->cyclicBufferPos = 0;
-+ MatchFinder_SetLimits(p);
-+}
-+
-+static UInt32 * Hc_GetMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
-+ UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
-+ UInt32 *distances, UInt32 maxLen)
-+{
-+ son[_cyclicBufferPos] = curMatch;
-+ for (;;)
-+ {
-+ UInt32 delta = pos - curMatch;
-+ if (cutValue-- == 0 || delta >= _cyclicBufferSize)
-+ return distances;
-+ {
-+ const Byte *pb = cur - delta;
-+ curMatch = son[_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)];
-+ if (pb[maxLen] == cur[maxLen] && *pb == *cur)
-+ {
-+ UInt32 len = 0;
-+ while (++len != lenLimit)
-+ if (pb[len] != cur[len])
-+ break;
-+ if (maxLen < len)
-+ {
-+ *distances++ = maxLen = len;
-+ *distances++ = delta - 1;
-+ if (len == lenLimit)
-+ return distances;
-+ }
-+ }
-+ }
-+ }
-+}
-+
-+UInt32 * GetMatchesSpec1(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
-+ UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue,
-+ UInt32 *distances, UInt32 maxLen)
-+{
-+ CLzRef *ptr0 = son + (_cyclicBufferPos << 1) + 1;
-+ CLzRef *ptr1 = son + (_cyclicBufferPos << 1);
-+ UInt32 len0 = 0, len1 = 0;
-+ for (;;)
-+ {
-+ UInt32 delta = pos - curMatch;
-+ if (cutValue-- == 0 || delta >= _cyclicBufferSize)
-+ {
-+ *ptr0 = *ptr1 = kEmptyHashValue;
-+ return distances;
-+ }
-+ {
-+ CLzRef *pair = son + ((_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)) << 1);
-+ const Byte *pb = cur - delta;
-+ UInt32 len = (len0 < len1 ? len0 : len1);
-+ if (pb[len] == cur[len])
-+ {
-+ if (++len != lenLimit && pb[len] == cur[len])
-+ while (++len != lenLimit)
-+ if (pb[len] != cur[len])
-+ break;
-+ if (maxLen < len)
-+ {
-+ *distances++ = maxLen = len;
-+ *distances++ = delta - 1;
-+ if (len == lenLimit)
-+ {
-+ *ptr1 = pair[0];
-+ *ptr0 = pair[1];
-+ return distances;
-+ }
-+ }
-+ }
-+ if (pb[len] < cur[len])
-+ {
-+ *ptr1 = curMatch;
-+ ptr1 = pair + 1;
-+ curMatch = *ptr1;
-+ len1 = len;
-+ }
-+ else
-+ {
-+ *ptr0 = curMatch;
-+ ptr0 = pair;
-+ curMatch = *ptr0;
-+ len0 = len;
-+ }
-+ }
-+ }
-+}
-+
-+static void SkipMatchesSpec(UInt32 lenLimit, UInt32 curMatch, UInt32 pos, const Byte *cur, CLzRef *son,
-+ UInt32 _cyclicBufferPos, UInt32 _cyclicBufferSize, UInt32 cutValue)
-+{
-+ CLzRef *ptr0 = son + (_cyclicBufferPos << 1) + 1;
-+ CLzRef *ptr1 = son + (_cyclicBufferPos << 1);
-+ UInt32 len0 = 0, len1 = 0;
-+ for (;;)
-+ {
-+ UInt32 delta = pos - curMatch;
-+ if (cutValue-- == 0 || delta >= _cyclicBufferSize)
-+ {
-+ *ptr0 = *ptr1 = kEmptyHashValue;
-+ return;
-+ }
-+ {
-+ CLzRef *pair = son + ((_cyclicBufferPos - delta + ((delta > _cyclicBufferPos) ? _cyclicBufferSize : 0)) << 1);
-+ const Byte *pb = cur - delta;
-+ UInt32 len = (len0 < len1 ? len0 : len1);
-+ if (pb[len] == cur[len])
-+ {
-+ while (++len != lenLimit)
-+ if (pb[len] != cur[len])
-+ break;
-+ {
-+ if (len == lenLimit)
-+ {
-+ *ptr1 = pair[0];
-+ *ptr0 = pair[1];
-+ return;
-+ }
-+ }
-+ }
-+ if (pb[len] < cur[len])
-+ {
-+ *ptr1 = curMatch;
-+ ptr1 = pair + 1;
-+ curMatch = *ptr1;
-+ len1 = len;
-+ }
-+ else
-+ {
-+ *ptr0 = curMatch;
-+ ptr0 = pair;
-+ curMatch = *ptr0;
-+ len0 = len;
-+ }
-+ }
-+ }
-+}
-+
-+#define MOVE_POS \
-+ ++p->cyclicBufferPos; \
-+ p->buffer++; \
-+ if (++p->pos == p->posLimit) MatchFinder_CheckLimits(p);
-+
-+#define MOVE_POS_RET MOVE_POS return offset;
-+
-+static void MatchFinder_MovePos(CMatchFinder *p) { MOVE_POS; }
-+
-+#define GET_MATCHES_HEADER2(minLen, ret_op) \
-+ UInt32 lenLimit; UInt32 hashValue; const Byte *cur; UInt32 curMatch; \
-+ lenLimit = p->lenLimit; { if (lenLimit < minLen) { MatchFinder_MovePos(p); ret_op; }} \
-+ cur = p->buffer;
-+
-+#define GET_MATCHES_HEADER(minLen) GET_MATCHES_HEADER2(minLen, return 0)
-+#define SKIP_HEADER(minLen) GET_MATCHES_HEADER2(minLen, continue)
-+
-+#define MF_PARAMS(p) p->pos, p->buffer, p->son, p->cyclicBufferPos, p->cyclicBufferSize, p->cutValue
-+
-+#define GET_MATCHES_FOOTER(offset, maxLen) \
-+ offset = (UInt32)(GetMatchesSpec1(lenLimit, curMatch, MF_PARAMS(p), \
-+ distances + offset, maxLen) - distances); MOVE_POS_RET;
-+
-+#define SKIP_FOOTER \
-+ SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p)); MOVE_POS;
-+
-+static UInt32 Bt2_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+ UInt32 offset;
-+ GET_MATCHES_HEADER(2)
-+ HASH2_CALC;
-+ curMatch = p->hash[hashValue];
-+ p->hash[hashValue] = p->pos;
-+ offset = 0;
-+ GET_MATCHES_FOOTER(offset, 1)
-+}
-+
-+UInt32 Bt3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+ UInt32 offset;
-+ GET_MATCHES_HEADER(3)
-+ HASH_ZIP_CALC;
-+ curMatch = p->hash[hashValue];
-+ p->hash[hashValue] = p->pos;
-+ offset = 0;
-+ GET_MATCHES_FOOTER(offset, 2)
-+}
-+
-+static UInt32 Bt3_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+ UInt32 hash2Value, delta2, maxLen, offset;
-+ GET_MATCHES_HEADER(3)
-+
-+ HASH3_CALC;
-+
-+ delta2 = p->pos - p->hash[hash2Value];
-+ curMatch = p->hash[kFix3HashSize + hashValue];
-+
-+ p->hash[hash2Value] =
-+ p->hash[kFix3HashSize + hashValue] = p->pos;
-+
-+
-+ maxLen = 2;
-+ offset = 0;
-+ if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
-+ {
-+ for (; maxLen != lenLimit; maxLen++)
-+ if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
-+ break;
-+ distances[0] = maxLen;
-+ distances[1] = delta2 - 1;
-+ offset = 2;
-+ if (maxLen == lenLimit)
-+ {
-+ SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p));
-+ MOVE_POS_RET;
-+ }
-+ }
-+ GET_MATCHES_FOOTER(offset, maxLen)
-+}
-+
-+static UInt32 Bt4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+ UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset;
-+ GET_MATCHES_HEADER(4)
-+
-+ HASH4_CALC;
-+
-+ delta2 = p->pos - p->hash[ hash2Value];
-+ delta3 = p->pos - p->hash[kFix3HashSize + hash3Value];
-+ curMatch = p->hash[kFix4HashSize + hashValue];
-+
-+ p->hash[ hash2Value] =
-+ p->hash[kFix3HashSize + hash3Value] =
-+ p->hash[kFix4HashSize + hashValue] = p->pos;
-+
-+ maxLen = 1;
-+ offset = 0;
-+ if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
-+ {
-+ distances[0] = maxLen = 2;
-+ distances[1] = delta2 - 1;
-+ offset = 2;
-+ }
-+ if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur)
-+ {
-+ maxLen = 3;
-+ distances[offset + 1] = delta3 - 1;
-+ offset += 2;
-+ delta2 = delta3;
-+ }
-+ if (offset != 0)
-+ {
-+ for (; maxLen != lenLimit; maxLen++)
-+ if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
-+ break;
-+ distances[offset - 2] = maxLen;
-+ if (maxLen == lenLimit)
-+ {
-+ SkipMatchesSpec(lenLimit, curMatch, MF_PARAMS(p));
-+ MOVE_POS_RET;
-+ }
-+ }
-+ if (maxLen < 3)
-+ maxLen = 3;
-+ GET_MATCHES_FOOTER(offset, maxLen)
-+}
-+
-+static UInt32 Hc4_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+ UInt32 hash2Value, hash3Value, delta2, delta3, maxLen, offset;
-+ GET_MATCHES_HEADER(4)
-+
-+ HASH4_CALC;
-+
-+ delta2 = p->pos - p->hash[ hash2Value];
-+ delta3 = p->pos - p->hash[kFix3HashSize + hash3Value];
-+ curMatch = p->hash[kFix4HashSize + hashValue];
-+
-+ p->hash[ hash2Value] =
-+ p->hash[kFix3HashSize + hash3Value] =
-+ p->hash[kFix4HashSize + hashValue] = p->pos;
-+
-+ maxLen = 1;
-+ offset = 0;
-+ if (delta2 < p->cyclicBufferSize && *(cur - delta2) == *cur)
-+ {
-+ distances[0] = maxLen = 2;
-+ distances[1] = delta2 - 1;
-+ offset = 2;
-+ }
-+ if (delta2 != delta3 && delta3 < p->cyclicBufferSize && *(cur - delta3) == *cur)
-+ {
-+ maxLen = 3;
-+ distances[offset + 1] = delta3 - 1;
-+ offset += 2;
-+ delta2 = delta3;
-+ }
-+ if (offset != 0)
-+ {
-+ for (; maxLen != lenLimit; maxLen++)
-+ if (cur[(ptrdiff_t)maxLen - delta2] != cur[maxLen])
-+ break;
-+ distances[offset - 2] = maxLen;
-+ if (maxLen == lenLimit)
-+ {
-+ p->son[p->cyclicBufferPos] = curMatch;
-+ MOVE_POS_RET;
-+ }
-+ }
-+ if (maxLen < 3)
-+ maxLen = 3;
-+ offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p),
-+ distances + offset, maxLen) - (distances));
-+ MOVE_POS_RET
-+}
-+
-+UInt32 Hc3Zip_MatchFinder_GetMatches(CMatchFinder *p, UInt32 *distances)
-+{
-+ UInt32 offset;
-+ GET_MATCHES_HEADER(3)
-+ HASH_ZIP_CALC;
-+ curMatch = p->hash[hashValue];
-+ p->hash[hashValue] = p->pos;
-+ offset = (UInt32)(Hc_GetMatchesSpec(lenLimit, curMatch, MF_PARAMS(p),
-+ distances, 2) - (distances));
-+ MOVE_POS_RET
-+}
-+
-+static void Bt2_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+ do
-+ {
-+ SKIP_HEADER(2)
-+ HASH2_CALC;
-+ curMatch = p->hash[hashValue];
-+ p->hash[hashValue] = p->pos;
-+ SKIP_FOOTER
-+ }
-+ while (--num != 0);
-+}
-+
-+void Bt3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+ do
-+ {
-+ SKIP_HEADER(3)
-+ HASH_ZIP_CALC;
-+ curMatch = p->hash[hashValue];
-+ p->hash[hashValue] = p->pos;
-+ SKIP_FOOTER
-+ }
-+ while (--num != 0);
-+}
-+
-+static void Bt3_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+ do
-+ {
-+ UInt32 hash2Value;
-+ SKIP_HEADER(3)
-+ HASH3_CALC;
-+ curMatch = p->hash[kFix3HashSize + hashValue];
-+ p->hash[hash2Value] =
-+ p->hash[kFix3HashSize + hashValue] = p->pos;
-+ SKIP_FOOTER
-+ }
-+ while (--num != 0);
-+}
-+
-+static void Bt4_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+ do
-+ {
-+ UInt32 hash2Value, hash3Value;
-+ SKIP_HEADER(4)
-+ HASH4_CALC;
-+ curMatch = p->hash[kFix4HashSize + hashValue];
-+ p->hash[ hash2Value] =
-+ p->hash[kFix3HashSize + hash3Value] = p->pos;
-+ p->hash[kFix4HashSize + hashValue] = p->pos;
-+ SKIP_FOOTER
-+ }
-+ while (--num != 0);
-+}
-+
-+static void Hc4_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+ do
-+ {
-+ UInt32 hash2Value, hash3Value;
-+ SKIP_HEADER(4)
-+ HASH4_CALC;
-+ curMatch = p->hash[kFix4HashSize + hashValue];
-+ p->hash[ hash2Value] =
-+ p->hash[kFix3HashSize + hash3Value] =
-+ p->hash[kFix4HashSize + hashValue] = p->pos;
-+ p->son[p->cyclicBufferPos] = curMatch;
-+ MOVE_POS
-+ }
-+ while (--num != 0);
-+}
-+
-+void Hc3Zip_MatchFinder_Skip(CMatchFinder *p, UInt32 num)
-+{
-+ do
-+ {
-+ SKIP_HEADER(3)
-+ HASH_ZIP_CALC;
-+ curMatch = p->hash[hashValue];
-+ p->hash[hashValue] = p->pos;
-+ p->son[p->cyclicBufferPos] = curMatch;
-+ MOVE_POS
-+ }
-+ while (--num != 0);
-+}
-+
-+void MatchFinder_CreateVTable(CMatchFinder *p, IMatchFinder *vTable)
-+{
-+ vTable->Init = (Mf_Init_Func)MatchFinder_Init;
-+ vTable->GetIndexByte = (Mf_GetIndexByte_Func)MatchFinder_GetIndexByte;
-+ vTable->GetNumAvailableBytes = (Mf_GetNumAvailableBytes_Func)MatchFinder_GetNumAvailableBytes;
-+ vTable->GetPointerToCurrentPos = (Mf_GetPointerToCurrentPos_Func)MatchFinder_GetPointerToCurrentPos;
-+ if (!p->btMode)
-+ {
-+ vTable->GetMatches = (Mf_GetMatches_Func)Hc4_MatchFinder_GetMatches;
-+ vTable->Skip = (Mf_Skip_Func)Hc4_MatchFinder_Skip;
-+ }
-+ else if (p->numHashBytes == 2)
-+ {
-+ vTable->GetMatches = (Mf_GetMatches_Func)Bt2_MatchFinder_GetMatches;
-+ vTable->Skip = (Mf_Skip_Func)Bt2_MatchFinder_Skip;
-+ }
-+ else if (p->numHashBytes == 3)
-+ {
-+ vTable->GetMatches = (Mf_GetMatches_Func)Bt3_MatchFinder_GetMatches;
-+ vTable->Skip = (Mf_Skip_Func)Bt3_MatchFinder_Skip;
-+ }
-+ else
-+ {
-+ vTable->GetMatches = (Mf_GetMatches_Func)Bt4_MatchFinder_GetMatches;
-+ vTable->Skip = (Mf_Skip_Func)Bt4_MatchFinder_Skip;
-+ }
-+}
---- /dev/null
-+++ b/lib/lzma/LzmaDec.c
-@@ -0,0 +1,999 @@
-+/* LzmaDec.c -- LZMA Decoder
-+2009-09-20 : Igor Pavlov : Public domain */
-+
-+#include "LzmaDec.h"
-+
-+#include <string.h>
-+
-+#define kNumTopBits 24
-+#define kTopValue ((UInt32)1 << kNumTopBits)
-+
-+#define kNumBitModelTotalBits 11
-+#define kBitModelTotal (1 << kNumBitModelTotalBits)
-+#define kNumMoveBits 5
-+
-+#define RC_INIT_SIZE 5
-+
-+#define NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | (*buf++); }
-+
-+#define IF_BIT_0(p) ttt = *(p); NORMALIZE; bound = (range >> kNumBitModelTotalBits) * ttt; if (code < bound)
-+#define UPDATE_0(p) range = bound; *(p) = (CLzmaProb)(ttt + ((kBitModelTotal - ttt) >> kNumMoveBits));
-+#define UPDATE_1(p) range -= bound; code -= bound; *(p) = (CLzmaProb)(ttt - (ttt >> kNumMoveBits));
-+#define GET_BIT2(p, i, A0, A1) IF_BIT_0(p) \
-+ { UPDATE_0(p); i = (i + i); A0; } else \
-+ { UPDATE_1(p); i = (i + i) + 1; A1; }
-+#define GET_BIT(p, i) GET_BIT2(p, i, ; , ;)
-+
-+#define TREE_GET_BIT(probs, i) { GET_BIT((probs + i), i); }
-+#define TREE_DECODE(probs, limit, i) \
-+ { i = 1; do { TREE_GET_BIT(probs, i); } while (i < limit); i -= limit; }
-+
-+/* #define _LZMA_SIZE_OPT */
-+
-+#ifdef _LZMA_SIZE_OPT
-+#define TREE_6_DECODE(probs, i) TREE_DECODE(probs, (1 << 6), i)
-+#else
-+#define TREE_6_DECODE(probs, i) \
-+ { i = 1; \
-+ TREE_GET_BIT(probs, i); \
-+ TREE_GET_BIT(probs, i); \
-+ TREE_GET_BIT(probs, i); \
-+ TREE_GET_BIT(probs, i); \
-+ TREE_GET_BIT(probs, i); \
-+ TREE_GET_BIT(probs, i); \
-+ i -= 0x40; }
-+#endif
-+
-+#define NORMALIZE_CHECK if (range < kTopValue) { if (buf >= bufLimit) return DUMMY_ERROR; range <<= 8; code = (code << 8) | (*buf++); }
-+
-+#define IF_BIT_0_CHECK(p) ttt = *(p); NORMALIZE_CHECK; bound = (range >> kNumBitModelTotalBits) * ttt; if (code < bound)
-+#define UPDATE_0_CHECK range = bound;
-+#define UPDATE_1_CHECK range -= bound; code -= bound;
-+#define GET_BIT2_CHECK(p, i, A0, A1) IF_BIT_0_CHECK(p) \
-+ { UPDATE_0_CHECK; i = (i + i); A0; } else \
-+ { UPDATE_1_CHECK; i = (i + i) + 1; A1; }
-+#define GET_BIT_CHECK(p, i) GET_BIT2_CHECK(p, i, ; , ;)
-+#define TREE_DECODE_CHECK(probs, limit, i) \
-+ { i = 1; do { GET_BIT_CHECK(probs + i, i) } while (i < limit); i -= limit; }
-+
-+
-+#define kNumPosBitsMax 4
-+#define kNumPosStatesMax (1 << kNumPosBitsMax)
-+
-+#define kLenNumLowBits 3
-+#define kLenNumLowSymbols (1 << kLenNumLowBits)
-+#define kLenNumMidBits 3
-+#define kLenNumMidSymbols (1 << kLenNumMidBits)
-+#define kLenNumHighBits 8
-+#define kLenNumHighSymbols (1 << kLenNumHighBits)
-+
-+#define LenChoice 0
-+#define LenChoice2 (LenChoice + 1)
-+#define LenLow (LenChoice2 + 1)
-+#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
-+#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
-+#define kNumLenProbs (LenHigh + kLenNumHighSymbols)
-+
-+
-+#define kNumStates 12
-+#define kNumLitStates 7
-+
-+#define kStartPosModelIndex 4
-+#define kEndPosModelIndex 14
-+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
-+
-+#define kNumPosSlotBits 6
-+#define kNumLenToPosStates 4
-+
-+#define kNumAlignBits 4
-+#define kAlignTableSize (1 << kNumAlignBits)
-+
-+#define kMatchMinLen 2
-+#define kMatchSpecLenStart (kMatchMinLen + kLenNumLowSymbols + kLenNumMidSymbols + kLenNumHighSymbols)
-+
-+#define IsMatch 0
-+#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
-+#define IsRepG0 (IsRep + kNumStates)
-+#define IsRepG1 (IsRepG0 + kNumStates)
-+#define IsRepG2 (IsRepG1 + kNumStates)
-+#define IsRep0Long (IsRepG2 + kNumStates)
-+#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
-+#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
-+#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
-+#define LenCoder (Align + kAlignTableSize)
-+#define RepLenCoder (LenCoder + kNumLenProbs)
-+#define Literal (RepLenCoder + kNumLenProbs)
-+
-+#define LZMA_BASE_SIZE 1846
-+#define LZMA_LIT_SIZE 768
-+
-+#define LzmaProps_GetNumProbs(p) ((UInt32)LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((p)->lc + (p)->lp)))
-+
-+#if Literal != LZMA_BASE_SIZE
-+StopCompilingDueBUG
-+#endif
-+
-+#define LZMA_DIC_MIN (1 << 12)
-+
-+/* First LZMA-symbol is always decoded.
-+And it decodes new LZMA-symbols while (buf < bufLimit), but "buf" is without last normalization
-+Out:
-+ Result:
-+ SZ_OK - OK
-+ SZ_ERROR_DATA - Error
-+ p->remainLen:
-+ < kMatchSpecLenStart : normal remain
-+ = kMatchSpecLenStart : finished
-+ = kMatchSpecLenStart + 1 : Flush marker
-+ = kMatchSpecLenStart + 2 : State Init Marker
-+*/
-+
-+static int MY_FAST_CALL LzmaDec_DecodeReal(CLzmaDec *p, SizeT limit, const Byte *bufLimit)
-+{
-+ CLzmaProb *probs = p->probs;
-+
-+ unsigned state = p->state;
-+ UInt32 rep0 = p->reps[0], rep1 = p->reps[1], rep2 = p->reps[2], rep3 = p->reps[3];
-+ unsigned pbMask = ((unsigned)1 << (p->prop.pb)) - 1;
-+ unsigned lpMask = ((unsigned)1 << (p->prop.lp)) - 1;
-+ unsigned lc = p->prop.lc;
-+
-+ Byte *dic = p->dic;
-+ SizeT dicBufSize = p->dicBufSize;
-+ SizeT dicPos = p->dicPos;
-+
-+ UInt32 processedPos = p->processedPos;
-+ UInt32 checkDicSize = p->checkDicSize;
-+ unsigned len = 0;
-+
-+ const Byte *buf = p->buf;
-+ UInt32 range = p->range;
-+ UInt32 code = p->code;
-+
-+ do
-+ {
-+ CLzmaProb *prob;
-+ UInt32 bound;
-+ unsigned ttt;
-+ unsigned posState = processedPos & pbMask;
-+
-+ prob = probs + IsMatch + (state << kNumPosBitsMax) + posState;
-+ IF_BIT_0(prob)
-+ {
-+ unsigned symbol;
-+ UPDATE_0(prob);
-+ prob = probs + Literal;
-+ if (checkDicSize != 0 || processedPos != 0)
-+ prob += (LZMA_LIT_SIZE * (((processedPos & lpMask) << lc) +
-+ (dic[(dicPos == 0 ? dicBufSize : dicPos) - 1] >> (8 - lc))));
-+
-+ if (state < kNumLitStates)
-+ {
-+ state -= (state < 4) ? state : 3;
-+ symbol = 1;
-+ do { GET_BIT(prob + symbol, symbol) } while (symbol < 0x100);
-+ }
-+ else
-+ {
-+ unsigned matchByte = p->dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
-+ unsigned offs = 0x100;
-+ state -= (state < 10) ? 3 : 6;
-+ symbol = 1;
-+ do
-+ {
-+ unsigned bit;
-+ CLzmaProb *probLit;
-+ matchByte <<= 1;
-+ bit = (matchByte & offs);
-+ probLit = prob + offs + bit + symbol;
-+ GET_BIT2(probLit, symbol, offs &= ~bit, offs &= bit)
-+ }
-+ while (symbol < 0x100);
-+ }
-+ dic[dicPos++] = (Byte)symbol;
-+ processedPos++;
-+ continue;
-+ }
-+ else
-+ {
-+ UPDATE_1(prob);
-+ prob = probs + IsRep + state;
-+ IF_BIT_0(prob)
-+ {
-+ UPDATE_0(prob);
-+ state += kNumStates;
-+ prob = probs + LenCoder;
-+ }
-+ else
-+ {
-+ UPDATE_1(prob);
-+ if (checkDicSize == 0 && processedPos == 0)
-+ return SZ_ERROR_DATA;
-+ prob = probs + IsRepG0 + state;
-+ IF_BIT_0(prob)
-+ {
-+ UPDATE_0(prob);
-+ prob = probs + IsRep0Long + (state << kNumPosBitsMax) + posState;
-+ IF_BIT_0(prob)
-+ {
-+ UPDATE_0(prob);
-+ dic[dicPos] = dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
-+ dicPos++;
-+ processedPos++;
-+ state = state < kNumLitStates ? 9 : 11;
-+ continue;
-+ }
-+ UPDATE_1(prob);
-+ }
-+ else
-+ {
-+ UInt32 distance;
-+ UPDATE_1(prob);
-+ prob = probs + IsRepG1 + state;
-+ IF_BIT_0(prob)
-+ {
-+ UPDATE_0(prob);
-+ distance = rep1;
-+ }
-+ else
-+ {
-+ UPDATE_1(prob);
-+ prob = probs + IsRepG2 + state;
-+ IF_BIT_0(prob)
-+ {
-+ UPDATE_0(prob);
-+ distance = rep2;
-+ }
-+ else
-+ {
-+ UPDATE_1(prob);
-+ distance = rep3;
-+ rep3 = rep2;
-+ }
-+ rep2 = rep1;
-+ }
-+ rep1 = rep0;
-+ rep0 = distance;
-+ }
-+ state = state < kNumLitStates ? 8 : 11;
-+ prob = probs + RepLenCoder;
-+ }
-+ {
-+ unsigned limit, offset;
-+ CLzmaProb *probLen = prob + LenChoice;
-+ IF_BIT_0(probLen)
-+ {
-+ UPDATE_0(probLen);
-+ probLen = prob + LenLow + (posState << kLenNumLowBits);
-+ offset = 0;
-+ limit = (1 << kLenNumLowBits);
-+ }
-+ else
-+ {
-+ UPDATE_1(probLen);
-+ probLen = prob + LenChoice2;
-+ IF_BIT_0(probLen)
-+ {
-+ UPDATE_0(probLen);
-+ probLen = prob + LenMid + (posState << kLenNumMidBits);
-+ offset = kLenNumLowSymbols;
-+ limit = (1 << kLenNumMidBits);
-+ }
-+ else
-+ {
-+ UPDATE_1(probLen);
-+ probLen = prob + LenHigh;
-+ offset = kLenNumLowSymbols + kLenNumMidSymbols;
-+ limit = (1 << kLenNumHighBits);
-+ }
-+ }
-+ TREE_DECODE(probLen, limit, len);
-+ len += offset;
-+ }
-+
-+ if (state >= kNumStates)
-+ {
-+ UInt32 distance;
-+ prob = probs + PosSlot +
-+ ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << kNumPosSlotBits);
-+ TREE_6_DECODE(prob, distance);
-+ if (distance >= kStartPosModelIndex)
-+ {
-+ unsigned posSlot = (unsigned)distance;
-+ int numDirectBits = (int)(((distance >> 1) - 1));
-+ distance = (2 | (distance & 1));
-+ if (posSlot < kEndPosModelIndex)
-+ {
-+ distance <<= numDirectBits;
-+ prob = probs + SpecPos + distance - posSlot - 1;
-+ {
-+ UInt32 mask = 1;
-+ unsigned i = 1;
-+ do
-+ {
-+ GET_BIT2(prob + i, i, ; , distance |= mask);
-+ mask <<= 1;
-+ }
-+ while (--numDirectBits != 0);
-+ }
-+ }
-+ else
-+ {
-+ numDirectBits -= kNumAlignBits;
-+ do
-+ {
-+ NORMALIZE
-+ range >>= 1;
-+
-+ {
-+ UInt32 t;
-+ code -= range;
-+ t = (0 - ((UInt32)code >> 31)); /* (UInt32)((Int32)code >> 31) */
-+ distance = (distance << 1) + (t + 1);
-+ code += range & t;
-+ }
-+ /*
-+ distance <<= 1;
-+ if (code >= range)
-+ {
-+ code -= range;
-+ distance |= 1;
-+ }
-+ */
-+ }
-+ while (--numDirectBits != 0);
-+ prob = probs + Align;
-+ distance <<= kNumAlignBits;
-+ {
-+ unsigned i = 1;
-+ GET_BIT2(prob + i, i, ; , distance |= 1);
-+ GET_BIT2(prob + i, i, ; , distance |= 2);
-+ GET_BIT2(prob + i, i, ; , distance |= 4);
-+ GET_BIT2(prob + i, i, ; , distance |= 8);
-+ }
-+ if (distance == (UInt32)0xFFFFFFFF)
-+ {
-+ len += kMatchSpecLenStart;
-+ state -= kNumStates;
-+ break;
-+ }
-+ }
-+ }
-+ rep3 = rep2;
-+ rep2 = rep1;
-+ rep1 = rep0;
-+ rep0 = distance + 1;
-+ if (checkDicSize == 0)
-+ {
-+ if (distance >= processedPos)
-+ return SZ_ERROR_DATA;
-+ }
-+ else if (distance >= checkDicSize)
-+ return SZ_ERROR_DATA;
-+ state = (state < kNumStates + kNumLitStates) ? kNumLitStates : kNumLitStates + 3;
-+ }
-+
-+ len += kMatchMinLen;
-+
-+ if (limit == dicPos)
-+ return SZ_ERROR_DATA;
-+ {
-+ SizeT rem = limit - dicPos;
-+ unsigned curLen = ((rem < len) ? (unsigned)rem : len);
-+ SizeT pos = (dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0);
-+
-+ processedPos += curLen;
-+
-+ len -= curLen;
-+ if (pos + curLen <= dicBufSize)
-+ {
-+ Byte *dest = dic + dicPos;
-+ ptrdiff_t src = (ptrdiff_t)pos - (ptrdiff_t)dicPos;
-+ const Byte *lim = dest + curLen;
-+ dicPos += curLen;
-+ do
-+ *(dest) = (Byte)*(dest + src);
-+ while (++dest != lim);
-+ }
-+ else
-+ {
-+ do
-+ {
-+ dic[dicPos++] = dic[pos];
-+ if (++pos == dicBufSize)
-+ pos = 0;
-+ }
-+ while (--curLen != 0);
-+ }
-+ }
-+ }
-+ }
-+ while (dicPos < limit && buf < bufLimit);
-+ NORMALIZE;
-+ p->buf = buf;
-+ p->range = range;
-+ p->code = code;
-+ p->remainLen = len;
-+ p->dicPos = dicPos;
-+ p->processedPos = processedPos;
-+ p->reps[0] = rep0;
-+ p->reps[1] = rep1;
-+ p->reps[2] = rep2;
-+ p->reps[3] = rep3;
-+ p->state = state;
-+
-+ return SZ_OK;
-+}
-+
-+static void MY_FAST_CALL LzmaDec_WriteRem(CLzmaDec *p, SizeT limit)
-+{
-+ if (p->remainLen != 0 && p->remainLen < kMatchSpecLenStart)
-+ {
-+ Byte *dic = p->dic;
-+ SizeT dicPos = p->dicPos;
-+ SizeT dicBufSize = p->dicBufSize;
-+ unsigned len = p->remainLen;
-+ UInt32 rep0 = p->reps[0];
-+ if (limit - dicPos < len)
-+ len = (unsigned)(limit - dicPos);
-+
-+ if (p->checkDicSize == 0 && p->prop.dicSize - p->processedPos <= len)
-+ p->checkDicSize = p->prop.dicSize;
-+
-+ p->processedPos += len;
-+ p->remainLen -= len;
-+ while (len-- != 0)
-+ {
-+ dic[dicPos] = dic[(dicPos - rep0) + ((dicPos < rep0) ? dicBufSize : 0)];
-+ dicPos++;
-+ }
-+ p->dicPos = dicPos;
-+ }
-+}
-+
-+static int MY_FAST_CALL LzmaDec_DecodeReal2(CLzmaDec *p, SizeT limit, const Byte *bufLimit)
-+{
-+ do
-+ {
-+ SizeT limit2 = limit;
-+ if (p->checkDicSize == 0)
-+ {
-+ UInt32 rem = p->prop.dicSize - p->processedPos;
-+ if (limit - p->dicPos > rem)
-+ limit2 = p->dicPos + rem;
-+ }
-+ RINOK(LzmaDec_DecodeReal(p, limit2, bufLimit));
-+ if (p->processedPos >= p->prop.dicSize)
-+ p->checkDicSize = p->prop.dicSize;
-+ LzmaDec_WriteRem(p, limit);
-+ }
-+ while (p->dicPos < limit && p->buf < bufLimit && p->remainLen < kMatchSpecLenStart);
-+
-+ if (p->remainLen > kMatchSpecLenStart)
-+ {
-+ p->remainLen = kMatchSpecLenStart;
-+ }
-+ return 0;
-+}
-+
-+typedef enum
-+{
-+ DUMMY_ERROR, /* unexpected end of input stream */
-+ DUMMY_LIT,
-+ DUMMY_MATCH,
-+ DUMMY_REP
-+} ELzmaDummy;
-+
-+static ELzmaDummy LzmaDec_TryDummy(const CLzmaDec *p, const Byte *buf, SizeT inSize)
-+{
-+ UInt32 range = p->range;
-+ UInt32 code = p->code;
-+ const Byte *bufLimit = buf + inSize;
-+ CLzmaProb *probs = p->probs;
-+ unsigned state = p->state;
-+ ELzmaDummy res;
-+
-+ {
-+ CLzmaProb *prob;
-+ UInt32 bound;
-+ unsigned ttt;
-+ unsigned posState = (p->processedPos) & ((1 << p->prop.pb) - 1);
-+
-+ prob = probs + IsMatch + (state << kNumPosBitsMax) + posState;
-+ IF_BIT_0_CHECK(prob)
-+ {
-+ UPDATE_0_CHECK
-+
-+ /* if (bufLimit - buf >= 7) return DUMMY_LIT; */
-+
-+ prob = probs + Literal;
-+ if (p->checkDicSize != 0 || p->processedPos != 0)
-+ prob += (LZMA_LIT_SIZE *
-+ ((((p->processedPos) & ((1 << (p->prop.lp)) - 1)) << p->prop.lc) +
-+ (p->dic[(p->dicPos == 0 ? p->dicBufSize : p->dicPos) - 1] >> (8 - p->prop.lc))));
-+
-+ if (state < kNumLitStates)
-+ {
-+ unsigned symbol = 1;
-+ do { GET_BIT_CHECK(prob + symbol, symbol) } while (symbol < 0x100);
-+ }
-+ else
-+ {
-+ unsigned matchByte = p->dic[p->dicPos - p->reps[0] +
-+ ((p->dicPos < p->reps[0]) ? p->dicBufSize : 0)];
-+ unsigned offs = 0x100;
-+ unsigned symbol = 1;
-+ do
-+ {
-+ unsigned bit;
-+ CLzmaProb *probLit;
-+ matchByte <<= 1;
-+ bit = (matchByte & offs);
-+ probLit = prob + offs + bit + symbol;
-+ GET_BIT2_CHECK(probLit, symbol, offs &= ~bit, offs &= bit)
-+ }
-+ while (symbol < 0x100);
-+ }
-+ res = DUMMY_LIT;
-+ }
-+ else
-+ {
-+ unsigned len;
-+ UPDATE_1_CHECK;
-+
-+ prob = probs + IsRep + state;
-+ IF_BIT_0_CHECK(prob)
-+ {
-+ UPDATE_0_CHECK;
-+ state = 0;
-+ prob = probs + LenCoder;
-+ res = DUMMY_MATCH;
-+ }
-+ else
-+ {
-+ UPDATE_1_CHECK;
-+ res = DUMMY_REP;
-+ prob = probs + IsRepG0 + state;
-+ IF_BIT_0_CHECK(prob)
-+ {
-+ UPDATE_0_CHECK;
-+ prob = probs + IsRep0Long + (state << kNumPosBitsMax) + posState;
-+ IF_BIT_0_CHECK(prob)
-+ {
-+ UPDATE_0_CHECK;
-+ NORMALIZE_CHECK;
-+ return DUMMY_REP;
-+ }
-+ else
-+ {
-+ UPDATE_1_CHECK;
-+ }
-+ }
-+ else
-+ {
-+ UPDATE_1_CHECK;
-+ prob = probs + IsRepG1 + state;
-+ IF_BIT_0_CHECK(prob)
-+ {
-+ UPDATE_0_CHECK;
-+ }
-+ else
-+ {
-+ UPDATE_1_CHECK;
-+ prob = probs + IsRepG2 + state;
-+ IF_BIT_0_CHECK(prob)
-+ {
-+ UPDATE_0_CHECK;
-+ }
-+ else
-+ {
-+ UPDATE_1_CHECK;
-+ }
-+ }
-+ }
-+ state = kNumStates;
-+ prob = probs + RepLenCoder;
-+ }
-+ {
-+ unsigned limit, offset;
-+ CLzmaProb *probLen = prob + LenChoice;
-+ IF_BIT_0_CHECK(probLen)
-+ {
-+ UPDATE_0_CHECK;
-+ probLen = prob + LenLow + (posState << kLenNumLowBits);
-+ offset = 0;
-+ limit = 1 << kLenNumLowBits;
-+ }
-+ else
-+ {
-+ UPDATE_1_CHECK;
-+ probLen = prob + LenChoice2;
-+ IF_BIT_0_CHECK(probLen)
-+ {
-+ UPDATE_0_CHECK;
-+ probLen = prob + LenMid + (posState << kLenNumMidBits);
-+ offset = kLenNumLowSymbols;
-+ limit = 1 << kLenNumMidBits;
-+ }
-+ else
-+ {
-+ UPDATE_1_CHECK;
-+ probLen = prob + LenHigh;
-+ offset = kLenNumLowSymbols + kLenNumMidSymbols;
-+ limit = 1 << kLenNumHighBits;
-+ }
-+ }
-+ TREE_DECODE_CHECK(probLen, limit, len);
-+ len += offset;
-+ }
-+
-+ if (state < 4)
-+ {
-+ unsigned posSlot;
-+ prob = probs + PosSlot +
-+ ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) <<
-+ kNumPosSlotBits);
-+ TREE_DECODE_CHECK(prob, 1 << kNumPosSlotBits, posSlot);
-+ if (posSlot >= kStartPosModelIndex)
-+ {
-+ int numDirectBits = ((posSlot >> 1) - 1);
-+
-+ /* if (bufLimit - buf >= 8) return DUMMY_MATCH; */
-+
-+ if (posSlot < kEndPosModelIndex)
-+ {
-+ prob = probs + SpecPos + ((2 | (posSlot & 1)) << numDirectBits) - posSlot - 1;
-+ }
-+ else
-+ {
-+ numDirectBits -= kNumAlignBits;
-+ do
-+ {
-+ NORMALIZE_CHECK
-+ range >>= 1;
-+ code -= range & (((code - range) >> 31) - 1);
-+ /* if (code >= range) code -= range; */
-+ }
-+ while (--numDirectBits != 0);
-+ prob = probs + Align;
-+ numDirectBits = kNumAlignBits;
-+ }
-+ {
-+ unsigned i = 1;
-+ do
-+ {
-+ GET_BIT_CHECK(prob + i, i);
-+ }
-+ while (--numDirectBits != 0);
-+ }
-+ }
-+ }
-+ }
-+ }
-+ NORMALIZE_CHECK;
-+ return res;
-+}
-+
-+
-+static void LzmaDec_InitRc(CLzmaDec *p, const Byte *data)
-+{
-+ p->code = ((UInt32)data[1] << 24) | ((UInt32)data[2] << 16) | ((UInt32)data[3] << 8) | ((UInt32)data[4]);
-+ p->range = 0xFFFFFFFF;
-+ p->needFlush = 0;
-+}
-+
-+void LzmaDec_InitDicAndState(CLzmaDec *p, Bool initDic, Bool initState)
-+{
-+ p->needFlush = 1;
-+ p->remainLen = 0;
-+ p->tempBufSize = 0;
-+
-+ if (initDic)
-+ {
-+ p->processedPos = 0;
-+ p->checkDicSize = 0;
-+ p->needInitState = 1;
-+ }
-+ if (initState)
-+ p->needInitState = 1;
-+}
-+
-+void LzmaDec_Init(CLzmaDec *p)
-+{
-+ p->dicPos = 0;
-+ LzmaDec_InitDicAndState(p, True, True);
-+}
-+
-+static void LzmaDec_InitStateReal(CLzmaDec *p)
-+{
-+ UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (p->prop.lc + p->prop.lp));
-+ UInt32 i;
-+ CLzmaProb *probs = p->probs;
-+ for (i = 0; i < numProbs; i++)
-+ probs[i] = kBitModelTotal >> 1;
-+ p->reps[0] = p->reps[1] = p->reps[2] = p->reps[3] = 1;
-+ p->state = 0;
-+ p->needInitState = 0;
-+}
-+
-+SRes LzmaDec_DecodeToDic(CLzmaDec *p, SizeT dicLimit, const Byte *src, SizeT *srcLen,
-+ ELzmaFinishMode finishMode, ELzmaStatus *status)
-+{
-+ SizeT inSize = *srcLen;
-+ (*srcLen) = 0;
-+ LzmaDec_WriteRem(p, dicLimit);
-+
-+ *status = LZMA_STATUS_NOT_SPECIFIED;
-+
-+ while (p->remainLen != kMatchSpecLenStart)
-+ {
-+ int checkEndMarkNow;
-+
-+ if (p->needFlush != 0)
-+ {
-+ for (; inSize > 0 && p->tempBufSize < RC_INIT_SIZE; (*srcLen)++, inSize--)
-+ p->tempBuf[p->tempBufSize++] = *src++;
-+ if (p->tempBufSize < RC_INIT_SIZE)
-+ {
-+ *status = LZMA_STATUS_NEEDS_MORE_INPUT;
-+ return SZ_OK;
-+ }
-+ if (p->tempBuf[0] != 0)
-+ return SZ_ERROR_DATA;
-+
-+ LzmaDec_InitRc(p, p->tempBuf);
-+ p->tempBufSize = 0;
-+ }
-+
-+ checkEndMarkNow = 0;
-+ if (p->dicPos >= dicLimit)
-+ {
-+ if (p->remainLen == 0 && p->code == 0)
-+ {
-+ *status = LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK;
-+ return SZ_OK;
-+ }
-+ if (finishMode == LZMA_FINISH_ANY)
-+ {
-+ *status = LZMA_STATUS_NOT_FINISHED;
-+ return SZ_OK;
-+ }
-+ if (p->remainLen != 0)
-+ {
-+ *status = LZMA_STATUS_NOT_FINISHED;
-+ return SZ_ERROR_DATA;
-+ }
-+ checkEndMarkNow = 1;
-+ }
-+
-+ if (p->needInitState)
-+ LzmaDec_InitStateReal(p);
-+
-+ if (p->tempBufSize == 0)
-+ {
-+ SizeT processed;
-+ const Byte *bufLimit;
-+ if (inSize < LZMA_REQUIRED_INPUT_MAX || checkEndMarkNow)
-+ {
-+ int dummyRes = LzmaDec_TryDummy(p, src, inSize);
-+ if (dummyRes == DUMMY_ERROR)
-+ {
-+ memcpy(p->tempBuf, src, inSize);
-+ p->tempBufSize = (unsigned)inSize;
-+ (*srcLen) += inSize;
-+ *status = LZMA_STATUS_NEEDS_MORE_INPUT;
-+ return SZ_OK;
-+ }
-+ if (checkEndMarkNow && dummyRes != DUMMY_MATCH)
-+ {
-+ *status = LZMA_STATUS_NOT_FINISHED;
-+ return SZ_ERROR_DATA;
-+ }
-+ bufLimit = src;
-+ }
-+ else
-+ bufLimit = src + inSize - LZMA_REQUIRED_INPUT_MAX;
-+ p->buf = src;
-+ if (LzmaDec_DecodeReal2(p, dicLimit, bufLimit) != 0)
-+ return SZ_ERROR_DATA;
-+ processed = (SizeT)(p->buf - src);
-+ (*srcLen) += processed;
-+ src += processed;
-+ inSize -= processed;
-+ }
-+ else
-+ {
-+ unsigned rem = p->tempBufSize, lookAhead = 0;
-+ while (rem < LZMA_REQUIRED_INPUT_MAX && lookAhead < inSize)
-+ p->tempBuf[rem++] = src[lookAhead++];
-+ p->tempBufSize = rem;
-+ if (rem < LZMA_REQUIRED_INPUT_MAX || checkEndMarkNow)
-+ {
-+ int dummyRes = LzmaDec_TryDummy(p, p->tempBuf, rem);
-+ if (dummyRes == DUMMY_ERROR)
-+ {
-+ (*srcLen) += lookAhead;
-+ *status = LZMA_STATUS_NEEDS_MORE_INPUT;
-+ return SZ_OK;
-+ }
-+ if (checkEndMarkNow && dummyRes != DUMMY_MATCH)
-+ {
-+ *status = LZMA_STATUS_NOT_FINISHED;
-+ return SZ_ERROR_DATA;
-+ }
-+ }
-+ p->buf = p->tempBuf;
-+ if (LzmaDec_DecodeReal2(p, dicLimit, p->buf) != 0)
-+ return SZ_ERROR_DATA;
-+ lookAhead -= (rem - (unsigned)(p->buf - p->tempBuf));
-+ (*srcLen) += lookAhead;
-+ src += lookAhead;
-+ inSize -= lookAhead;
-+ p->tempBufSize = 0;
-+ }
-+ }
-+ if (p->code == 0)
-+ *status = LZMA_STATUS_FINISHED_WITH_MARK;
-+ return (p->code == 0) ? SZ_OK : SZ_ERROR_DATA;
-+}
-+
-+SRes LzmaDec_DecodeToBuf(CLzmaDec *p, Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen, ELzmaFinishMode finishMode, ELzmaStatus *status)
-+{
-+ SizeT outSize = *destLen;
-+ SizeT inSize = *srcLen;
-+ *srcLen = *destLen = 0;
-+ for (;;)
-+ {
-+ SizeT inSizeCur = inSize, outSizeCur, dicPos;
-+ ELzmaFinishMode curFinishMode;
-+ SRes res;
-+ if (p->dicPos == p->dicBufSize)
-+ p->dicPos = 0;
-+ dicPos = p->dicPos;
-+ if (outSize > p->dicBufSize - dicPos)
-+ {
-+ outSizeCur = p->dicBufSize;
-+ curFinishMode = LZMA_FINISH_ANY;
-+ }
-+ else
-+ {
-+ outSizeCur = dicPos + outSize;
-+ curFinishMode = finishMode;
-+ }
-+
-+ res = LzmaDec_DecodeToDic(p, outSizeCur, src, &inSizeCur, curFinishMode, status);
-+ src += inSizeCur;
-+ inSize -= inSizeCur;
-+ *srcLen += inSizeCur;
-+ outSizeCur = p->dicPos - dicPos;
-+ memcpy(dest, p->dic + dicPos, outSizeCur);
-+ dest += outSizeCur;
-+ outSize -= outSizeCur;
-+ *destLen += outSizeCur;
-+ if (res != 0)
-+ return res;
-+ if (outSizeCur == 0 || outSize == 0)
-+ return SZ_OK;
-+ }
-+}
-+
-+void LzmaDec_FreeProbs(CLzmaDec *p, ISzAlloc *alloc)
-+{
-+ alloc->Free(alloc, p->probs);
-+ p->probs = 0;
-+}
-+
-+static void LzmaDec_FreeDict(CLzmaDec *p, ISzAlloc *alloc)
-+{
-+ alloc->Free(alloc, p->dic);
-+ p->dic = 0;
-+}
-+
-+void LzmaDec_Free(CLzmaDec *p, ISzAlloc *alloc)
-+{
-+ LzmaDec_FreeProbs(p, alloc);
-+ LzmaDec_FreeDict(p, alloc);
-+}
-+
-+SRes LzmaProps_Decode(CLzmaProps *p, const Byte *data, unsigned size)
-+{
-+ UInt32 dicSize;
-+ Byte d;
-+
-+ if (size < LZMA_PROPS_SIZE)
-+ return SZ_ERROR_UNSUPPORTED;
-+ else
-+ dicSize = data[1] | ((UInt32)data[2] << 8) | ((UInt32)data[3] << 16) | ((UInt32)data[4] << 24);
-+
-+ if (dicSize < LZMA_DIC_MIN)
-+ dicSize = LZMA_DIC_MIN;
-+ p->dicSize = dicSize;
-+
-+ d = data[0];
-+ if (d >= (9 * 5 * 5))
-+ return SZ_ERROR_UNSUPPORTED;
-+
-+ p->lc = d % 9;
-+ d /= 9;
-+ p->pb = d / 5;
-+ p->lp = d % 5;
-+
-+ return SZ_OK;
-+}
-+
-+static SRes LzmaDec_AllocateProbs2(CLzmaDec *p, const CLzmaProps *propNew, ISzAlloc *alloc)
-+{
-+ UInt32 numProbs = LzmaProps_GetNumProbs(propNew);
-+ if (p->probs == 0 || numProbs != p->numProbs)
-+ {
-+ LzmaDec_FreeProbs(p, alloc);
-+ p->probs = (CLzmaProb *)alloc->Alloc(alloc, numProbs * sizeof(CLzmaProb));
-+ p->numProbs = numProbs;
-+ if (p->probs == 0)
-+ return SZ_ERROR_MEM;
-+ }
-+ return SZ_OK;
-+}
-+
-+SRes LzmaDec_AllocateProbs(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
-+{
-+ CLzmaProps propNew;
-+ RINOK(LzmaProps_Decode(&propNew, props, propsSize));
-+ RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc));
-+ p->prop = propNew;
-+ return SZ_OK;
-+}
-+
-+SRes LzmaDec_Allocate(CLzmaDec *p, const Byte *props, unsigned propsSize, ISzAlloc *alloc)
-+{
-+ CLzmaProps propNew;
-+ SizeT dicBufSize;
-+ RINOK(LzmaProps_Decode(&propNew, props, propsSize));
-+ RINOK(LzmaDec_AllocateProbs2(p, &propNew, alloc));
-+ dicBufSize = propNew.dicSize;
-+ if (p->dic == 0 || dicBufSize != p->dicBufSize)
-+ {
-+ LzmaDec_FreeDict(p, alloc);
-+ p->dic = (Byte *)alloc->Alloc(alloc, dicBufSize);
-+ if (p->dic == 0)
-+ {
-+ LzmaDec_FreeProbs(p, alloc);
-+ return SZ_ERROR_MEM;
-+ }
-+ }
-+ p->dicBufSize = dicBufSize;
-+ p->prop = propNew;
-+ return SZ_OK;
-+}
-+
-+SRes LzmaDecode(Byte *dest, SizeT *destLen, const Byte *src, SizeT *srcLen,
-+ const Byte *propData, unsigned propSize, ELzmaFinishMode finishMode,
-+ ELzmaStatus *status, ISzAlloc *alloc)
-+{
-+ CLzmaDec p;
-+ SRes res;
-+ SizeT inSize = *srcLen;
-+ SizeT outSize = *destLen;
-+ *srcLen = *destLen = 0;
-+ if (inSize < RC_INIT_SIZE)
-+ return SZ_ERROR_INPUT_EOF;
-+
-+ LzmaDec_Construct(&p);
-+ res = LzmaDec_AllocateProbs(&p, propData, propSize, alloc);
-+ if (res != 0)
-+ return res;
-+ p.dic = dest;
-+ p.dicBufSize = outSize;
-+
-+ LzmaDec_Init(&p);
-+
-+ *srcLen = inSize;
-+ res = LzmaDec_DecodeToDic(&p, outSize, src, srcLen, finishMode, status);
-+
-+ if (res == SZ_OK && *status == LZMA_STATUS_NEEDS_MORE_INPUT)
-+ res = SZ_ERROR_INPUT_EOF;
-+
-+ (*destLen) = p.dicPos;
-+ LzmaDec_FreeProbs(&p, alloc);
-+ return res;
-+}
---- /dev/null
-+++ b/lib/lzma/LzmaEnc.c
-@@ -0,0 +1,2271 @@
-+/* LzmaEnc.c -- LZMA Encoder
-+2009-11-24 : Igor Pavlov : Public domain */
-+
-+#include <string.h>
-+
-+/* #define SHOW_STAT */
-+/* #define SHOW_STAT2 */
-+
-+#if defined(SHOW_STAT) || defined(SHOW_STAT2)
-+#include <stdio.h>
-+#endif
-+
-+#include "LzmaEnc.h"
-+
-+/* disable MT */
-+#define _7ZIP_ST
-+
-+#include "LzFind.h"
-+#ifndef _7ZIP_ST
-+#include "LzFindMt.h"
-+#endif
-+
-+#ifdef SHOW_STAT
-+static int ttt = 0;
-+#endif
-+
-+#define kBlockSizeMax ((1 << LZMA_NUM_BLOCK_SIZE_BITS) - 1)
-+
-+#define kBlockSize (9 << 10)
-+#define kUnpackBlockSize (1 << 18)
-+#define kMatchArraySize (1 << 21)
-+#define kMatchRecordMaxSize ((LZMA_MATCH_LEN_MAX * 2 + 3) * LZMA_MATCH_LEN_MAX)
-+
-+#define kNumMaxDirectBits (31)
-+
-+#define kNumTopBits 24
-+#define kTopValue ((UInt32)1 << kNumTopBits)
-+
-+#define kNumBitModelTotalBits 11
-+#define kBitModelTotal (1 << kNumBitModelTotalBits)
-+#define kNumMoveBits 5
-+#define kProbInitValue (kBitModelTotal >> 1)
-+
-+#define kNumMoveReducingBits 4
-+#define kNumBitPriceShiftBits 4
-+#define kBitPrice (1 << kNumBitPriceShiftBits)
-+
-+void LzmaEncProps_Init(CLzmaEncProps *p)
-+{
-+ p->level = 5;
-+ p->dictSize = p->mc = 0;
-+ p->lc = p->lp = p->pb = p->algo = p->fb = p->btMode = p->numHashBytes = p->numThreads = -1;
-+ p->writeEndMark = 0;
-+}
-+
-+void LzmaEncProps_Normalize(CLzmaEncProps *p)
-+{
-+ int level = p->level;
-+ if (level < 0) level = 5;
-+ p->level = level;
-+ if (p->dictSize == 0) p->dictSize = (level <= 5 ? (1 << (level * 2 + 14)) : (level == 6 ? (1 << 25) : (1 << 26)));
-+ if (p->lc < 0) p->lc = 3;
-+ if (p->lp < 0) p->lp = 0;
-+ if (p->pb < 0) p->pb = 2;
-+ if (p->algo < 0) p->algo = (level < 5 ? 0 : 1);
-+ if (p->fb < 0) p->fb = (level < 7 ? 32 : 64);
-+ if (p->btMode < 0) p->btMode = (p->algo == 0 ? 0 : 1);
-+ if (p->numHashBytes < 0) p->numHashBytes = 4;
-+ if (p->mc == 0) p->mc = (16 + (p->fb >> 1)) >> (p->btMode ? 0 : 1);
-+ if (p->numThreads < 0)
-+ p->numThreads =
-+ #ifndef _7ZIP_ST
-+ ((p->btMode && p->algo) ? 2 : 1);
-+ #else
-+ 1;
-+ #endif
-+}
-+
-+UInt32 LzmaEncProps_GetDictSize(const CLzmaEncProps *props2)
-+{
-+ CLzmaEncProps props = *props2;
-+ LzmaEncProps_Normalize(&props);
-+ return props.dictSize;
-+}
-+
-+/* #define LZMA_LOG_BSR */
-+/* Define it for Intel's CPU */
-+
-+
-+#ifdef LZMA_LOG_BSR
-+
-+#define kDicLogSizeMaxCompress 30
-+
-+#define BSR2_RET(pos, res) { unsigned long i; _BitScanReverse(&i, (pos)); res = (i + i) + ((pos >> (i - 1)) & 1); }
-+
-+UInt32 GetPosSlot1(UInt32 pos)
-+{
-+ UInt32 res;
-+ BSR2_RET(pos, res);
-+ return res;
-+}
-+#define GetPosSlot2(pos, res) { BSR2_RET(pos, res); }
-+#define GetPosSlot(pos, res) { if (pos < 2) res = pos; else BSR2_RET(pos, res); }
-+
-+#else
-+
-+#define kNumLogBits (9 + (int)sizeof(size_t) / 2)
-+#define kDicLogSizeMaxCompress ((kNumLogBits - 1) * 2 + 7)
-+
-+void LzmaEnc_FastPosInit(Byte *g_FastPos)
-+{
-+ int c = 2, slotFast;
-+ g_FastPos[0] = 0;
-+ g_FastPos[1] = 1;
-+
-+ for (slotFast = 2; slotFast < kNumLogBits * 2; slotFast++)
-+ {
-+ UInt32 k = (1 << ((slotFast >> 1) - 1));
-+ UInt32 j;
-+ for (j = 0; j < k; j++, c++)
-+ g_FastPos[c] = (Byte)slotFast;
-+ }
-+}
-+
-+#define BSR2_RET(pos, res) { UInt32 i = 6 + ((kNumLogBits - 1) & \
-+ (0 - (((((UInt32)1 << (kNumLogBits + 6)) - 1) - pos) >> 31))); \
-+ res = p->g_FastPos[pos >> i] + (i * 2); }
-+/*
-+#define BSR2_RET(pos, res) { res = (pos < (1 << (kNumLogBits + 6))) ? \
-+ p->g_FastPos[pos >> 6] + 12 : \
-+ p->g_FastPos[pos >> (6 + kNumLogBits - 1)] + (6 + (kNumLogBits - 1)) * 2; }
-+*/
-+
-+#define GetPosSlot1(pos) p->g_FastPos[pos]
-+#define GetPosSlot2(pos, res) { BSR2_RET(pos, res); }
-+#define GetPosSlot(pos, res) { if (pos < kNumFullDistances) res = p->g_FastPos[pos]; else BSR2_RET(pos, res); }
-+
-+#endif
-+
-+
-+#define LZMA_NUM_REPS 4
-+
-+typedef unsigned CState;
-+
-+typedef struct
-+{
-+ UInt32 price;
-+
-+ CState state;
-+ int prev1IsChar;
-+ int prev2;
-+
-+ UInt32 posPrev2;
-+ UInt32 backPrev2;
-+
-+ UInt32 posPrev;
-+ UInt32 backPrev;
-+ UInt32 backs[LZMA_NUM_REPS];
-+} COptimal;
-+
-+#define kNumOpts (1 << 12)
-+
-+#define kNumLenToPosStates 4
-+#define kNumPosSlotBits 6
-+#define kDicLogSizeMin 0
-+#define kDicLogSizeMax 32
-+#define kDistTableSizeMax (kDicLogSizeMax * 2)
-+
-+
-+#define kNumAlignBits 4
-+#define kAlignTableSize (1 << kNumAlignBits)
-+#define kAlignMask (kAlignTableSize - 1)
-+
-+#define kStartPosModelIndex 4
-+#define kEndPosModelIndex 14
-+#define kNumPosModels (kEndPosModelIndex - kStartPosModelIndex)
-+
-+#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
-+
-+#ifdef _LZMA_PROB32
-+#define CLzmaProb UInt32
-+#else
-+#define CLzmaProb UInt16
-+#endif
-+
-+#define LZMA_PB_MAX 4
-+#define LZMA_LC_MAX 8
-+#define LZMA_LP_MAX 4
-+
-+#define LZMA_NUM_PB_STATES_MAX (1 << LZMA_PB_MAX)
-+
-+
-+#define kLenNumLowBits 3
-+#define kLenNumLowSymbols (1 << kLenNumLowBits)
-+#define kLenNumMidBits 3
-+#define kLenNumMidSymbols (1 << kLenNumMidBits)
-+#define kLenNumHighBits 8
-+#define kLenNumHighSymbols (1 << kLenNumHighBits)
-+
-+#define kLenNumSymbolsTotal (kLenNumLowSymbols + kLenNumMidSymbols + kLenNumHighSymbols)
-+
-+#define LZMA_MATCH_LEN_MIN 2
-+#define LZMA_MATCH_LEN_MAX (LZMA_MATCH_LEN_MIN + kLenNumSymbolsTotal - 1)
-+
-+#define kNumStates 12
-+
-+typedef struct
-+{
-+ CLzmaProb choice;
-+ CLzmaProb choice2;
-+ CLzmaProb low[LZMA_NUM_PB_STATES_MAX << kLenNumLowBits];
-+ CLzmaProb mid[LZMA_NUM_PB_STATES_MAX << kLenNumMidBits];
-+ CLzmaProb high[kLenNumHighSymbols];
-+} CLenEnc;
-+
-+typedef struct
-+{
-+ CLenEnc p;
-+ UInt32 prices[LZMA_NUM_PB_STATES_MAX][kLenNumSymbolsTotal];
-+ UInt32 tableSize;
-+ UInt32 counters[LZMA_NUM_PB_STATES_MAX];
-+} CLenPriceEnc;
-+
-+typedef struct
-+{
-+ UInt32 range;
-+ Byte cache;
-+ UInt64 low;
-+ UInt64 cacheSize;
-+ Byte *buf;
-+ Byte *bufLim;
-+ Byte *bufBase;
-+ ISeqOutStream *outStream;
-+ UInt64 processed;
-+ SRes res;
-+} CRangeEnc;
-+
-+typedef struct
-+{
-+ CLzmaProb *litProbs;
-+
-+ CLzmaProb isMatch[kNumStates][LZMA_NUM_PB_STATES_MAX];
-+ CLzmaProb isRep[kNumStates];
-+ CLzmaProb isRepG0[kNumStates];
-+ CLzmaProb isRepG1[kNumStates];
-+ CLzmaProb isRepG2[kNumStates];
-+ CLzmaProb isRep0Long[kNumStates][LZMA_NUM_PB_STATES_MAX];
-+
-+ CLzmaProb posSlotEncoder[kNumLenToPosStates][1 << kNumPosSlotBits];
-+ CLzmaProb posEncoders[kNumFullDistances - kEndPosModelIndex];
-+ CLzmaProb posAlignEncoder[1 << kNumAlignBits];
-+
-+ CLenPriceEnc lenEnc;
-+ CLenPriceEnc repLenEnc;
-+
-+ UInt32 reps[LZMA_NUM_REPS];
-+ UInt32 state;
-+} CSaveState;
-+
-+typedef struct
-+{
-+ IMatchFinder matchFinder;
-+ void *matchFinderObj;
-+
-+ #ifndef _7ZIP_ST
-+ Bool mtMode;
-+ CMatchFinderMt matchFinderMt;
-+ #endif
-+
-+ CMatchFinder matchFinderBase;
-+
-+ #ifndef _7ZIP_ST
-+ Byte pad[128];
-+ #endif
-+
-+ UInt32 optimumEndIndex;
-+ UInt32 optimumCurrentIndex;
-+
-+ UInt32 longestMatchLength;
-+ UInt32 numPairs;
-+ UInt32 numAvail;
-+ COptimal opt[kNumOpts];
-+
-+ #ifndef LZMA_LOG_BSR
-+ Byte g_FastPos[1 << kNumLogBits];
-+ #endif
-+
-+ UInt32 ProbPrices[kBitModelTotal >> kNumMoveReducingBits];
-+ UInt32 matches[LZMA_MATCH_LEN_MAX * 2 + 2 + 1];
-+ UInt32 numFastBytes;
-+ UInt32 additionalOffset;
-+ UInt32 reps[LZMA_NUM_REPS];
-+ UInt32 state;
-+
-+ UInt32 posSlotPrices[kNumLenToPosStates][kDistTableSizeMax];
-+ UInt32 distancesPrices[kNumLenToPosStates][kNumFullDistances];
-+ UInt32 alignPrices[kAlignTableSize];
-+ UInt32 alignPriceCount;
-+
-+ UInt32 distTableSize;
-+
-+ unsigned lc, lp, pb;
-+ unsigned lpMask, pbMask;
-+
-+ CLzmaProb *litProbs;
-+
-+ CLzmaProb isMatch[kNumStates][LZMA_NUM_PB_STATES_MAX];
-+ CLzmaProb isRep[kNumStates];
-+ CLzmaProb isRepG0[kNumStates];
-+ CLzmaProb isRepG1[kNumStates];
-+ CLzmaProb isRepG2[kNumStates];
-+ CLzmaProb isRep0Long[kNumStates][LZMA_NUM_PB_STATES_MAX];
-+
-+ CLzmaProb posSlotEncoder[kNumLenToPosStates][1 << kNumPosSlotBits];
-+ CLzmaProb posEncoders[kNumFullDistances - kEndPosModelIndex];
-+ CLzmaProb posAlignEncoder[1 << kNumAlignBits];
-+
-+ CLenPriceEnc lenEnc;
-+ CLenPriceEnc repLenEnc;
-+
-+ unsigned lclp;
-+
-+ Bool fastMode;
-+
-+ CRangeEnc rc;
-+
-+ Bool writeEndMark;
-+ UInt64 nowPos64;
-+ UInt32 matchPriceCount;
-+ Bool finished;
-+ Bool multiThread;
-+
-+ SRes result;
-+ UInt32 dictSize;
-+ UInt32 matchFinderCycles;
-+
-+ int needInit;
-+
-+ CSaveState saveState;
-+} CLzmaEnc;
-+
-+void LzmaEnc_SaveState(CLzmaEncHandle pp)
-+{
-+ CLzmaEnc *p = (CLzmaEnc *)pp;
-+ CSaveState *dest = &p->saveState;
-+ int i;
-+ dest->lenEnc = p->lenEnc;
-+ dest->repLenEnc = p->repLenEnc;
-+ dest->state = p->state;
-+
-+ for (i = 0; i < kNumStates; i++)
-+ {
-+ memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i]));
-+ memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i]));
-+ }
-+ for (i = 0; i < kNumLenToPosStates; i++)
-+ memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i]));
-+ memcpy(dest->isRep, p->isRep, sizeof(p->isRep));
-+ memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0));
-+ memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1));
-+ memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2));
-+ memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders));
-+ memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder));
-+ memcpy(dest->reps, p->reps, sizeof(p->reps));
-+ memcpy(dest->litProbs, p->litProbs, (0x300 << p->lclp) * sizeof(CLzmaProb));
-+}
-+
-+void LzmaEnc_RestoreState(CLzmaEncHandle pp)
-+{
-+ CLzmaEnc *dest = (CLzmaEnc *)pp;
-+ const CSaveState *p = &dest->saveState;
-+ int i;
-+ dest->lenEnc = p->lenEnc;
-+ dest->repLenEnc = p->repLenEnc;
-+ dest->state = p->state;
-+
-+ for (i = 0; i < kNumStates; i++)
-+ {
-+ memcpy(dest->isMatch[i], p->isMatch[i], sizeof(p->isMatch[i]));
-+ memcpy(dest->isRep0Long[i], p->isRep0Long[i], sizeof(p->isRep0Long[i]));
-+ }
-+ for (i = 0; i < kNumLenToPosStates; i++)
-+ memcpy(dest->posSlotEncoder[i], p->posSlotEncoder[i], sizeof(p->posSlotEncoder[i]));
-+ memcpy(dest->isRep, p->isRep, sizeof(p->isRep));
-+ memcpy(dest->isRepG0, p->isRepG0, sizeof(p->isRepG0));
-+ memcpy(dest->isRepG1, p->isRepG1, sizeof(p->isRepG1));
-+ memcpy(dest->isRepG2, p->isRepG2, sizeof(p->isRepG2));
-+ memcpy(dest->posEncoders, p->posEncoders, sizeof(p->posEncoders));
-+ memcpy(dest->posAlignEncoder, p->posAlignEncoder, sizeof(p->posAlignEncoder));
-+ memcpy(dest->reps, p->reps, sizeof(p->reps));
-+ memcpy(dest->litProbs, p->litProbs, (0x300 << dest->lclp) * sizeof(CLzmaProb));
-+}
-+
-+SRes LzmaEnc_SetProps(CLzmaEncHandle pp, const CLzmaEncProps *props2)
-+{
-+ CLzmaEnc *p = (CLzmaEnc *)pp;
-+ CLzmaEncProps props = *props2;
-+ LzmaEncProps_Normalize(&props);
-+
-+ if (props.lc > LZMA_LC_MAX || props.lp > LZMA_LP_MAX || props.pb > LZMA_PB_MAX ||
-+ props.dictSize > (1 << kDicLogSizeMaxCompress) || props.dictSize > (1 << 30))
-+ return SZ_ERROR_PARAM;
-+ p->dictSize = props.dictSize;
-+ p->matchFinderCycles = props.mc;
-+ {
-+ unsigned fb = props.fb;
-+ if (fb < 5)
-+ fb = 5;
-+ if (fb > LZMA_MATCH_LEN_MAX)
-+ fb = LZMA_MATCH_LEN_MAX;
-+ p->numFastBytes = fb;
-+ }
-+ p->lc = props.lc;
-+ p->lp = props.lp;
-+ p->pb = props.pb;
-+ p->fastMode = (props.algo == 0);
-+ p->matchFinderBase.btMode = props.btMode;
-+ {
-+ UInt32 numHashBytes = 4;
-+ if (props.btMode)
-+ {
-+ if (props.numHashBytes < 2)
-+ numHashBytes = 2;
-+ else if (props.numHashBytes < 4)
-+ numHashBytes = props.numHashBytes;
-+ }
-+ p->matchFinderBase.numHashBytes = numHashBytes;
-+ }
-+
-+ p->matchFinderBase.cutValue = props.mc;
-+
-+ p->writeEndMark = props.writeEndMark;
-+
-+ #ifndef _7ZIP_ST
-+ /*
-+ if (newMultiThread != _multiThread)
-+ {
-+ ReleaseMatchFinder();
-+ _multiThread = newMultiThread;
-+ }
-+ */
-+ p->multiThread = (props.numThreads > 1);
-+ #endif
-+
-+ return SZ_OK;
-+}
-+
-+static const int kLiteralNextStates[kNumStates] = {0, 0, 0, 0, 1, 2, 3, 4, 5, 6, 4, 5};
-+static const int kMatchNextStates[kNumStates] = {7, 7, 7, 7, 7, 7, 7, 10, 10, 10, 10, 10};
-+static const int kRepNextStates[kNumStates] = {8, 8, 8, 8, 8, 8, 8, 11, 11, 11, 11, 11};
-+static const int kShortRepNextStates[kNumStates]= {9, 9, 9, 9, 9, 9, 9, 11, 11, 11, 11, 11};
-+
-+#define IsCharState(s) ((s) < 7)
-+
-+#define GetLenToPosState(len) (((len) < kNumLenToPosStates + 1) ? (len) - 2 : kNumLenToPosStates - 1)
-+
-+#define kInfinityPrice (1 << 30)
-+
-+static void RangeEnc_Construct(CRangeEnc *p)
-+{
-+ p->outStream = 0;
-+ p->bufBase = 0;
-+}
-+
-+#define RangeEnc_GetProcessed(p) ((p)->processed + ((p)->buf - (p)->bufBase) + (p)->cacheSize)
-+
-+#define RC_BUF_SIZE (1 << 16)
-+static int RangeEnc_Alloc(CRangeEnc *p, ISzAlloc *alloc)
-+{
-+ if (p->bufBase == 0)
-+ {
-+ p->bufBase = (Byte *)alloc->Alloc(alloc, RC_BUF_SIZE);
-+ if (p->bufBase == 0)
-+ return 0;
-+ p->bufLim = p->bufBase + RC_BUF_SIZE;
-+ }
-+ return 1;
-+}
-+
-+static void RangeEnc_Free(CRangeEnc *p, ISzAlloc *alloc)
-+{
-+ alloc->Free(alloc, p->bufBase);
-+ p->bufBase = 0;
-+}
-+
-+static void RangeEnc_Init(CRangeEnc *p)
-+{
-+ /* Stream.Init(); */
-+ p->low = 0;
-+ p->range = 0xFFFFFFFF;
-+ p->cacheSize = 1;
-+ p->cache = 0;
-+
-+ p->buf = p->bufBase;
-+
-+ p->processed = 0;
-+ p->res = SZ_OK;
-+}
-+
-+static void RangeEnc_FlushStream(CRangeEnc *p)
-+{
-+ size_t num;
-+ if (p->res != SZ_OK)
-+ return;
-+ num = p->buf - p->bufBase;
-+ if (num != p->outStream->Write(p->outStream, p->bufBase, num))
-+ p->res = SZ_ERROR_WRITE;
-+ p->processed += num;
-+ p->buf = p->bufBase;
-+}
-+
-+static void MY_FAST_CALL RangeEnc_ShiftLow(CRangeEnc *p)
-+{
-+ if ((UInt32)p->low < (UInt32)0xFF000000 || (int)(p->low >> 32) != 0)
-+ {
-+ Byte temp = p->cache;
-+ do
-+ {
-+ Byte *buf = p->buf;
-+ *buf++ = (Byte)(temp + (Byte)(p->low >> 32));
-+ p->buf = buf;
-+ if (buf == p->bufLim)
-+ RangeEnc_FlushStream(p);
-+ temp = 0xFF;
-+ }
-+ while (--p->cacheSize != 0);
-+ p->cache = (Byte)((UInt32)p->low >> 24);
-+ }
-+ p->cacheSize++;
-+ p->low = (UInt32)p->low << 8;
-+}
-+
-+static void RangeEnc_FlushData(CRangeEnc *p)
-+{
-+ int i;
-+ for (i = 0; i < 5; i++)
-+ RangeEnc_ShiftLow(p);
-+}
-+
-+static void RangeEnc_EncodeDirectBits(CRangeEnc *p, UInt32 value, int numBits)
-+{
-+ do
-+ {
-+ p->range >>= 1;
-+ p->low += p->range & (0 - ((value >> --numBits) & 1));
-+ if (p->range < kTopValue)
-+ {
-+ p->range <<= 8;
-+ RangeEnc_ShiftLow(p);
-+ }
-+ }
-+ while (numBits != 0);
-+}
-+
-+static void RangeEnc_EncodeBit(CRangeEnc *p, CLzmaProb *prob, UInt32 symbol)
-+{
-+ UInt32 ttt = *prob;
-+ UInt32 newBound = (p->range >> kNumBitModelTotalBits) * ttt;
-+ if (symbol == 0)
-+ {
-+ p->range = newBound;
-+ ttt += (kBitModelTotal - ttt) >> kNumMoveBits;
-+ }
-+ else
-+ {
-+ p->low += newBound;
-+ p->range -= newBound;
-+ ttt -= ttt >> kNumMoveBits;
-+ }
-+ *prob = (CLzmaProb)ttt;
-+ if (p->range < kTopValue)
-+ {
-+ p->range <<= 8;
-+ RangeEnc_ShiftLow(p);
-+ }
-+}
-+
-+static void LitEnc_Encode(CRangeEnc *p, CLzmaProb *probs, UInt32 symbol)
-+{
-+ symbol |= 0x100;
-+ do
-+ {
-+ RangeEnc_EncodeBit(p, probs + (symbol >> 8), (symbol >> 7) & 1);
-+ symbol <<= 1;
-+ }
-+ while (symbol < 0x10000);
-+}
-+
-+static void LitEnc_EncodeMatched(CRangeEnc *p, CLzmaProb *probs, UInt32 symbol, UInt32 matchByte)
-+{
-+ UInt32 offs = 0x100;
-+ symbol |= 0x100;
-+ do
-+ {
-+ matchByte <<= 1;
-+ RangeEnc_EncodeBit(p, probs + (offs + (matchByte & offs) + (symbol >> 8)), (symbol >> 7) & 1);
-+ symbol <<= 1;
-+ offs &= ~(matchByte ^ symbol);
-+ }
-+ while (symbol < 0x10000);
-+}
-+
-+void LzmaEnc_InitPriceTables(UInt32 *ProbPrices)
-+{
-+ UInt32 i;
-+ for (i = (1 << kNumMoveReducingBits) / 2; i < kBitModelTotal; i += (1 << kNumMoveReducingBits))
-+ {
-+ const int kCyclesBits = kNumBitPriceShiftBits;
-+ UInt32 w = i;
-+ UInt32 bitCount = 0;
-+ int j;
-+ for (j = 0; j < kCyclesBits; j++)
-+ {
-+ w = w * w;
-+ bitCount <<= 1;
-+ while (w >= ((UInt32)1 << 16))
-+ {
-+ w >>= 1;
-+ bitCount++;
-+ }
-+ }
-+ ProbPrices[i >> kNumMoveReducingBits] = ((kNumBitModelTotalBits << kCyclesBits) - 15 - bitCount);
-+ }
-+}
-+
-+
-+#define GET_PRICE(prob, symbol) \
-+ p->ProbPrices[((prob) ^ (((-(int)(symbol))) & (kBitModelTotal - 1))) >> kNumMoveReducingBits];
-+
-+#define GET_PRICEa(prob, symbol) \
-+ ProbPrices[((prob) ^ ((-((int)(symbol))) & (kBitModelTotal - 1))) >> kNumMoveReducingBits];
-+
-+#define GET_PRICE_0(prob) p->ProbPrices[(prob) >> kNumMoveReducingBits]
-+#define GET_PRICE_1(prob) p->ProbPrices[((prob) ^ (kBitModelTotal - 1)) >> kNumMoveReducingBits]
-+
-+#define GET_PRICE_0a(prob) ProbPrices[(prob) >> kNumMoveReducingBits]
-+#define GET_PRICE_1a(prob) ProbPrices[((prob) ^ (kBitModelTotal - 1)) >> kNumMoveReducingBits]
-+
-+static UInt32 LitEnc_GetPrice(const CLzmaProb *probs, UInt32 symbol, UInt32 *ProbPrices)
-+{
-+ UInt32 price = 0;
-+ symbol |= 0x100;
-+ do
-+ {
-+ price += GET_PRICEa(probs[symbol >> 8], (symbol >> 7) & 1);
-+ symbol <<= 1;
-+ }
-+ while (symbol < 0x10000);
-+ return price;
-+}
-+
-+static UInt32 LitEnc_GetPriceMatched(const CLzmaProb *probs, UInt32 symbol, UInt32 matchByte, UInt32 *ProbPrices)
-+{
-+ UInt32 price = 0;
-+ UInt32 offs = 0x100;
-+ symbol |= 0x100;
-+ do
-+ {
-+ matchByte <<= 1;
-+ price += GET_PRICEa(probs[offs + (matchByte & offs) + (symbol >> 8)], (symbol >> 7) & 1);
-+ symbol <<= 1;
-+ offs &= ~(matchByte ^ symbol);
-+ }
-+ while (symbol < 0x10000);
-+ return price;
-+}
-+
-+
-+static void RcTree_Encode(CRangeEnc *rc, CLzmaProb *probs, int numBitLevels, UInt32 symbol)
-+{
-+ UInt32 m = 1;
-+ int i;
-+ for (i = numBitLevels; i != 0;)
-+ {
-+ UInt32 bit;
-+ i--;
-+ bit = (symbol >> i) & 1;
-+ RangeEnc_EncodeBit(rc, probs + m, bit);
-+ m = (m << 1) | bit;
-+ }
-+}
-+
-+static void RcTree_ReverseEncode(CRangeEnc *rc, CLzmaProb *probs, int numBitLevels, UInt32 symbol)
-+{
-+ UInt32 m = 1;
-+ int i;
-+ for (i = 0; i < numBitLevels; i++)
-+ {
-+ UInt32 bit = symbol & 1;
-+ RangeEnc_EncodeBit(rc, probs + m, bit);
-+ m = (m << 1) | bit;
-+ symbol >>= 1;
-+ }
-+}
-+
-+static UInt32 RcTree_GetPrice(const CLzmaProb *probs, int numBitLevels, UInt32 symbol, UInt32 *ProbPrices)
-+{
-+ UInt32 price = 0;
-+ symbol |= (1 << numBitLevels);
-+ while (symbol != 1)
-+ {
-+ price += GET_PRICEa(probs[symbol >> 1], symbol & 1);
-+ symbol >>= 1;
-+ }
-+ return price;
-+}
-+
-+static UInt32 RcTree_ReverseGetPrice(const CLzmaProb *probs, int numBitLevels, UInt32 symbol, UInt32 *ProbPrices)
-+{
-+ UInt32 price = 0;
-+ UInt32 m = 1;
-+ int i;
-+ for (i = numBitLevels; i != 0; i--)
-+ {
-+ UInt32 bit = symbol & 1;
-+ symbol >>= 1;
-+ price += GET_PRICEa(probs[m], bit);
-+ m = (m << 1) | bit;
-+ }
-+ return price;
-+}
-+
-+
-+static void LenEnc_Init(CLenEnc *p)
-+{
-+ unsigned i;
-+ p->choice = p->choice2 = kProbInitValue;
-+ for (i = 0; i < (LZMA_NUM_PB_STATES_MAX << kLenNumLowBits); i++)
-+ p->low[i] = kProbInitValue;
-+ for (i = 0; i < (LZMA_NUM_PB_STATES_MAX << kLenNumMidBits); i++)
-+ p->mid[i] = kProbInitValue;
-+ for (i = 0; i < kLenNumHighSymbols; i++)
-+ p->high[i] = kProbInitValue;
-+}
-+
-+static void LenEnc_Encode(CLenEnc *p, CRangeEnc *rc, UInt32 symbol, UInt32 posState)
-+{
-+ if (symbol < kLenNumLowSymbols)
-+ {
-+ RangeEnc_EncodeBit(rc, &p->choice, 0);
-+ RcTree_Encode(rc, p->low + (posState << kLenNumLowBits), kLenNumLowBits, symbol);
-+ }
-+ else
-+ {
-+ RangeEnc_EncodeBit(rc, &p->choice, 1);
-+ if (symbol < kLenNumLowSymbols + kLenNumMidSymbols)
-+ {
-+ RangeEnc_EncodeBit(rc, &p->choice2, 0);
-+ RcTree_Encode(rc, p->mid + (posState << kLenNumMidBits), kLenNumMidBits, symbol - kLenNumLowSymbols);
-+ }
-+ else
-+ {
-+ RangeEnc_EncodeBit(rc, &p->choice2, 1);
-+ RcTree_Encode(rc, p->high, kLenNumHighBits, symbol - kLenNumLowSymbols - kLenNumMidSymbols);
-+ }
-+ }
-+}
-+
-+static void LenEnc_SetPrices(CLenEnc *p, UInt32 posState, UInt32 numSymbols, UInt32 *prices, UInt32 *ProbPrices)
-+{
-+ UInt32 a0 = GET_PRICE_0a(p->choice);
-+ UInt32 a1 = GET_PRICE_1a(p->choice);
-+ UInt32 b0 = a1 + GET_PRICE_0a(p->choice2);
-+ UInt32 b1 = a1 + GET_PRICE_1a(p->choice2);
-+ UInt32 i = 0;
-+ for (i = 0; i < kLenNumLowSymbols; i++)
-+ {
-+ if (i >= numSymbols)
-+ return;
-+ prices[i] = a0 + RcTree_GetPrice(p->low + (posState << kLenNumLowBits), kLenNumLowBits, i, ProbPrices);
-+ }
-+ for (; i < kLenNumLowSymbols + kLenNumMidSymbols; i++)
-+ {
-+ if (i >= numSymbols)
-+ return;
-+ prices[i] = b0 + RcTree_GetPrice(p->mid + (posState << kLenNumMidBits), kLenNumMidBits, i - kLenNumLowSymbols, ProbPrices);
-+ }
-+ for (; i < numSymbols; i++)
-+ prices[i] = b1 + RcTree_GetPrice(p->high, kLenNumHighBits, i - kLenNumLowSymbols - kLenNumMidSymbols, ProbPrices);
-+}
-+
-+static void MY_FAST_CALL LenPriceEnc_UpdateTable(CLenPriceEnc *p, UInt32 posState, UInt32 *ProbPrices)
-+{
-+ LenEnc_SetPrices(&p->p, posState, p->tableSize, p->prices[posState], ProbPrices);
-+ p->counters[posState] = p->tableSize;
-+}
-+
-+static void LenPriceEnc_UpdateTables(CLenPriceEnc *p, UInt32 numPosStates, UInt32 *ProbPrices)
-+{
-+ UInt32 posState;
-+ for (posState = 0; posState < numPosStates; posState++)
-+ LenPriceEnc_UpdateTable(p, posState, ProbPrices);
-+}
-+
-+static void LenEnc_Encode2(CLenPriceEnc *p, CRangeEnc *rc, UInt32 symbol, UInt32 posState, Bool updatePrice, UInt32 *ProbPrices)
-+{
-+ LenEnc_Encode(&p->p, rc, symbol, posState);
-+ if (updatePrice)
-+ if (--p->counters[posState] == 0)
-+ LenPriceEnc_UpdateTable(p, posState, ProbPrices);
-+}
-+
-+
-+
-+
-+static void MovePos(CLzmaEnc *p, UInt32 num)
-+{
-+ #ifdef SHOW_STAT
-+ ttt += num;
-+ printf("\n MovePos %d", num);
-+ #endif
-+ if (num != 0)
-+ {
-+ p->additionalOffset += num;
-+ p->matchFinder.Skip(p->matchFinderObj, num);
-+ }
-+}
-+
-+static UInt32 ReadMatchDistances(CLzmaEnc *p, UInt32 *numDistancePairsRes)
-+{
-+ UInt32 lenRes = 0, numPairs;
-+ p->numAvail = p->matchFinder.GetNumAvailableBytes(p->matchFinderObj);
-+ numPairs = p->matchFinder.GetMatches(p->matchFinderObj, p->matches);
-+ #ifdef SHOW_STAT
-+ printf("\n i = %d numPairs = %d ", ttt, numPairs / 2);
-+ ttt++;
-+ {
-+ UInt32 i;
-+ for (i = 0; i < numPairs; i += 2)
-+ printf("%2d %6d | ", p->matches[i], p->matches[i + 1]);
-+ }
-+ #endif
-+ if (numPairs > 0)
-+ {
-+ lenRes = p->matches[numPairs - 2];
-+ if (lenRes == p->numFastBytes)
-+ {
-+ const Byte *pby = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
-+ UInt32 distance = p->matches[numPairs - 1] + 1;
-+ UInt32 numAvail = p->numAvail;
-+ if (numAvail > LZMA_MATCH_LEN_MAX)
-+ numAvail = LZMA_MATCH_LEN_MAX;
-+ {
-+ const Byte *pby2 = pby - distance;
-+ for (; lenRes < numAvail && pby[lenRes] == pby2[lenRes]; lenRes++);
-+ }
-+ }
-+ }
-+ p->additionalOffset++;
-+ *numDistancePairsRes = numPairs;
-+ return lenRes;
-+}
-+
-+
-+#define MakeAsChar(p) (p)->backPrev = (UInt32)(-1); (p)->prev1IsChar = False;
-+#define MakeAsShortRep(p) (p)->backPrev = 0; (p)->prev1IsChar = False;
-+#define IsShortRep(p) ((p)->backPrev == 0)
-+
-+static UInt32 GetRepLen1Price(CLzmaEnc *p, UInt32 state, UInt32 posState)
-+{
-+ return
-+ GET_PRICE_0(p->isRepG0[state]) +
-+ GET_PRICE_0(p->isRep0Long[state][posState]);
-+}
-+
-+static UInt32 GetPureRepPrice(CLzmaEnc *p, UInt32 repIndex, UInt32 state, UInt32 posState)
-+{
-+ UInt32 price;
-+ if (repIndex == 0)
-+ {
-+ price = GET_PRICE_0(p->isRepG0[state]);
-+ price += GET_PRICE_1(p->isRep0Long[state][posState]);
-+ }
-+ else
-+ {
-+ price = GET_PRICE_1(p->isRepG0[state]);
-+ if (repIndex == 1)
-+ price += GET_PRICE_0(p->isRepG1[state]);
-+ else
-+ {
-+ price += GET_PRICE_1(p->isRepG1[state]);
-+ price += GET_PRICE(p->isRepG2[state], repIndex - 2);
-+ }
-+ }
-+ return price;
-+}
-+
-+static UInt32 GetRepPrice(CLzmaEnc *p, UInt32 repIndex, UInt32 len, UInt32 state, UInt32 posState)
-+{
-+ return p->repLenEnc.prices[posState][len - LZMA_MATCH_LEN_MIN] +
-+ GetPureRepPrice(p, repIndex, state, posState);
-+}
-+
-+static UInt32 Backward(CLzmaEnc *p, UInt32 *backRes, UInt32 cur)
-+{
-+ UInt32 posMem = p->opt[cur].posPrev;
-+ UInt32 backMem = p->opt[cur].backPrev;
-+ p->optimumEndIndex = cur;
-+ do
-+ {
-+ if (p->opt[cur].prev1IsChar)
-+ {
-+ MakeAsChar(&p->opt[posMem])
-+ p->opt[posMem].posPrev = posMem - 1;
-+ if (p->opt[cur].prev2)
-+ {
-+ p->opt[posMem - 1].prev1IsChar = False;
-+ p->opt[posMem - 1].posPrev = p->opt[cur].posPrev2;
-+ p->opt[posMem - 1].backPrev = p->opt[cur].backPrev2;
-+ }
-+ }
-+ {
-+ UInt32 posPrev = posMem;
-+ UInt32 backCur = backMem;
-+
-+ backMem = p->opt[posPrev].backPrev;
-+ posMem = p->opt[posPrev].posPrev;
-+
-+ p->opt[posPrev].backPrev = backCur;
-+ p->opt[posPrev].posPrev = cur;
-+ cur = posPrev;
-+ }
-+ }
-+ while (cur != 0);
-+ *backRes = p->opt[0].backPrev;
-+ p->optimumCurrentIndex = p->opt[0].posPrev;
-+ return p->optimumCurrentIndex;
-+}
-+
-+#define LIT_PROBS(pos, prevByte) (p->litProbs + ((((pos) & p->lpMask) << p->lc) + ((prevByte) >> (8 - p->lc))) * 0x300)
-+
-+static UInt32 GetOptimum(CLzmaEnc *p, UInt32 position, UInt32 *backRes)
-+{
-+ UInt32 numAvail, mainLen, numPairs, repMaxIndex, i, posState, lenEnd, len, cur;
-+ UInt32 matchPrice, repMatchPrice, normalMatchPrice;
-+ UInt32 reps[LZMA_NUM_REPS], repLens[LZMA_NUM_REPS];
-+ UInt32 *matches;
-+ const Byte *data;
-+ Byte curByte, matchByte;
-+ if (p->optimumEndIndex != p->optimumCurrentIndex)
-+ {
-+ const COptimal *opt = &p->opt[p->optimumCurrentIndex];
-+ UInt32 lenRes = opt->posPrev - p->optimumCurrentIndex;
-+ *backRes = opt->backPrev;
-+ p->optimumCurrentIndex = opt->posPrev;
-+ return lenRes;
-+ }
-+ p->optimumCurrentIndex = p->optimumEndIndex = 0;
-+
-+ if (p->additionalOffset == 0)
-+ mainLen = ReadMatchDistances(p, &numPairs);
-+ else
-+ {
-+ mainLen = p->longestMatchLength;
-+ numPairs = p->numPairs;
-+ }
-+
-+ numAvail = p->numAvail;
-+ if (numAvail < 2)
-+ {
-+ *backRes = (UInt32)(-1);
-+ return 1;
-+ }
-+ if (numAvail > LZMA_MATCH_LEN_MAX)
-+ numAvail = LZMA_MATCH_LEN_MAX;
-+
-+ data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
-+ repMaxIndex = 0;
-+ for (i = 0; i < LZMA_NUM_REPS; i++)
-+ {
-+ UInt32 lenTest;
-+ const Byte *data2;
-+ reps[i] = p->reps[i];
-+ data2 = data - (reps[i] + 1);
-+ if (data[0] != data2[0] || data[1] != data2[1])
-+ {
-+ repLens[i] = 0;
-+ continue;
-+ }
-+ for (lenTest = 2; lenTest < numAvail && data[lenTest] == data2[lenTest]; lenTest++);
-+ repLens[i] = lenTest;
-+ if (lenTest > repLens[repMaxIndex])
-+ repMaxIndex = i;
-+ }
-+ if (repLens[repMaxIndex] >= p->numFastBytes)
-+ {
-+ UInt32 lenRes;
-+ *backRes = repMaxIndex;
-+ lenRes = repLens[repMaxIndex];
-+ MovePos(p, lenRes - 1);
-+ return lenRes;
-+ }
-+
-+ matches = p->matches;
-+ if (mainLen >= p->numFastBytes)
-+ {
-+ *backRes = matches[numPairs - 1] + LZMA_NUM_REPS;
-+ MovePos(p, mainLen - 1);
-+ return mainLen;
-+ }
-+ curByte = *data;
-+ matchByte = *(data - (reps[0] + 1));
-+
-+ if (mainLen < 2 && curByte != matchByte && repLens[repMaxIndex] < 2)
-+ {
-+ *backRes = (UInt32)-1;
-+ return 1;
-+ }
-+
-+ p->opt[0].state = (CState)p->state;
-+
-+ posState = (position & p->pbMask);
-+
-+ {
-+ const CLzmaProb *probs = LIT_PROBS(position, *(data - 1));
-+ p->opt[1].price = GET_PRICE_0(p->isMatch[p->state][posState]) +
-+ (!IsCharState(p->state) ?
-+ LitEnc_GetPriceMatched(probs, curByte, matchByte, p->ProbPrices) :
-+ LitEnc_GetPrice(probs, curByte, p->ProbPrices));
-+ }
-+
-+ MakeAsChar(&p->opt[1]);
-+
-+ matchPrice = GET_PRICE_1(p->isMatch[p->state][posState]);
-+ repMatchPrice = matchPrice + GET_PRICE_1(p->isRep[p->state]);
-+
-+ if (matchByte == curByte)
-+ {
-+ UInt32 shortRepPrice = repMatchPrice + GetRepLen1Price(p, p->state, posState);
-+ if (shortRepPrice < p->opt[1].price)
-+ {
-+ p->opt[1].price = shortRepPrice;
-+ MakeAsShortRep(&p->opt[1]);
-+ }
-+ }
-+ lenEnd = ((mainLen >= repLens[repMaxIndex]) ? mainLen : repLens[repMaxIndex]);
-+
-+ if (lenEnd < 2)
-+ {
-+ *backRes = p->opt[1].backPrev;
-+ return 1;
-+ }
-+
-+ p->opt[1].posPrev = 0;
-+ for (i = 0; i < LZMA_NUM_REPS; i++)
-+ p->opt[0].backs[i] = reps[i];
-+
-+ len = lenEnd;
-+ do
-+ p->opt[len--].price = kInfinityPrice;
-+ while (len >= 2);
-+
-+ for (i = 0; i < LZMA_NUM_REPS; i++)
-+ {
-+ UInt32 repLen = repLens[i];
-+ UInt32 price;
-+ if (repLen < 2)
-+ continue;
-+ price = repMatchPrice + GetPureRepPrice(p, i, p->state, posState);
-+ do
-+ {
-+ UInt32 curAndLenPrice = price + p->repLenEnc.prices[posState][repLen - 2];
-+ COptimal *opt = &p->opt[repLen];
-+ if (curAndLenPrice < opt->price)
-+ {
-+ opt->price = curAndLenPrice;
-+ opt->posPrev = 0;
-+ opt->backPrev = i;
-+ opt->prev1IsChar = False;
-+ }
-+ }
-+ while (--repLen >= 2);
-+ }
-+
-+ normalMatchPrice = matchPrice + GET_PRICE_0(p->isRep[p->state]);
-+
-+ len = ((repLens[0] >= 2) ? repLens[0] + 1 : 2);
-+ if (len <= mainLen)
-+ {
-+ UInt32 offs = 0;
-+ while (len > matches[offs])
-+ offs += 2;
-+ for (; ; len++)
-+ {
-+ COptimal *opt;
-+ UInt32 distance = matches[offs + 1];
-+
-+ UInt32 curAndLenPrice = normalMatchPrice + p->lenEnc.prices[posState][len - LZMA_MATCH_LEN_MIN];
-+ UInt32 lenToPosState = GetLenToPosState(len);
-+ if (distance < kNumFullDistances)
-+ curAndLenPrice += p->distancesPrices[lenToPosState][distance];
-+ else
-+ {
-+ UInt32 slot;
-+ GetPosSlot2(distance, slot);
-+ curAndLenPrice += p->alignPrices[distance & kAlignMask] + p->posSlotPrices[lenToPosState][slot];
-+ }
-+ opt = &p->opt[len];
-+ if (curAndLenPrice < opt->price)
-+ {
-+ opt->price = curAndLenPrice;
-+ opt->posPrev = 0;
-+ opt->backPrev = distance + LZMA_NUM_REPS;
-+ opt->prev1IsChar = False;
-+ }
-+ if (len == matches[offs])
-+ {
-+ offs += 2;
-+ if (offs == numPairs)
-+ break;
-+ }
-+ }
-+ }
-+
-+ cur = 0;
-+
-+ #ifdef SHOW_STAT2
-+ if (position >= 0)
-+ {
-+ unsigned i;
-+ printf("\n pos = %4X", position);
-+ for (i = cur; i <= lenEnd; i++)
-+ printf("\nprice[%4X] = %d", position - cur + i, p->opt[i].price);
-+ }
-+ #endif
-+
-+ for (;;)
-+ {
-+ UInt32 numAvailFull, newLen, numPairs, posPrev, state, posState, startLen;
-+ UInt32 curPrice, curAnd1Price, matchPrice, repMatchPrice;
-+ Bool nextIsChar;
-+ Byte curByte, matchByte;
-+ const Byte *data;
-+ COptimal *curOpt;
-+ COptimal *nextOpt;
-+
-+ cur++;
-+ if (cur == lenEnd)
-+ return Backward(p, backRes, cur);
-+
-+ newLen = ReadMatchDistances(p, &numPairs);
-+ if (newLen >= p->numFastBytes)
-+ {
-+ p->numPairs = numPairs;
-+ p->longestMatchLength = newLen;
-+ return Backward(p, backRes, cur);
-+ }
-+ position++;
-+ curOpt = &p->opt[cur];
-+ posPrev = curOpt->posPrev;
-+ if (curOpt->prev1IsChar)
-+ {
-+ posPrev--;
-+ if (curOpt->prev2)
-+ {
-+ state = p->opt[curOpt->posPrev2].state;
-+ if (curOpt->backPrev2 < LZMA_NUM_REPS)
-+ state = kRepNextStates[state];
-+ else
-+ state = kMatchNextStates[state];
-+ }
-+ else
-+ state = p->opt[posPrev].state;
-+ state = kLiteralNextStates[state];
-+ }
-+ else
-+ state = p->opt[posPrev].state;
-+ if (posPrev == cur - 1)
-+ {
-+ if (IsShortRep(curOpt))
-+ state = kShortRepNextStates[state];
-+ else
-+ state = kLiteralNextStates[state];
-+ }
-+ else
-+ {
-+ UInt32 pos;
-+ const COptimal *prevOpt;
-+ if (curOpt->prev1IsChar && curOpt->prev2)
-+ {
-+ posPrev = curOpt->posPrev2;
-+ pos = curOpt->backPrev2;
-+ state = kRepNextStates[state];
-+ }
-+ else
-+ {
-+ pos = curOpt->backPrev;
-+ if (pos < LZMA_NUM_REPS)
-+ state = kRepNextStates[state];
-+ else
-+ state = kMatchNextStates[state];
-+ }
-+ prevOpt = &p->opt[posPrev];
-+ if (pos < LZMA_NUM_REPS)
-+ {
-+ UInt32 i;
-+ reps[0] = prevOpt->backs[pos];
-+ for (i = 1; i <= pos; i++)
-+ reps[i] = prevOpt->backs[i - 1];
-+ for (; i < LZMA_NUM_REPS; i++)
-+ reps[i] = prevOpt->backs[i];
-+ }
-+ else
-+ {
-+ UInt32 i;
-+ reps[0] = (pos - LZMA_NUM_REPS);
-+ for (i = 1; i < LZMA_NUM_REPS; i++)
-+ reps[i] = prevOpt->backs[i - 1];
-+ }
-+ }
-+ curOpt->state = (CState)state;
-+
-+ curOpt->backs[0] = reps[0];
-+ curOpt->backs[1] = reps[1];
-+ curOpt->backs[2] = reps[2];
-+ curOpt->backs[3] = reps[3];
-+
-+ curPrice = curOpt->price;
-+ nextIsChar = False;
-+ data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
-+ curByte = *data;
-+ matchByte = *(data - (reps[0] + 1));
-+
-+ posState = (position & p->pbMask);
-+
-+ curAnd1Price = curPrice + GET_PRICE_0(p->isMatch[state][posState]);
-+ {
-+ const CLzmaProb *probs = LIT_PROBS(position, *(data - 1));
-+ curAnd1Price +=
-+ (!IsCharState(state) ?
-+ LitEnc_GetPriceMatched(probs, curByte, matchByte, p->ProbPrices) :
-+ LitEnc_GetPrice(probs, curByte, p->ProbPrices));
-+ }
-+
-+ nextOpt = &p->opt[cur + 1];
-+
-+ if (curAnd1Price < nextOpt->price)
-+ {
-+ nextOpt->price = curAnd1Price;
-+ nextOpt->posPrev = cur;
-+ MakeAsChar(nextOpt);
-+ nextIsChar = True;
-+ }
-+
-+ matchPrice = curPrice + GET_PRICE_1(p->isMatch[state][posState]);
-+ repMatchPrice = matchPrice + GET_PRICE_1(p->isRep[state]);
-+
-+ if (matchByte == curByte && !(nextOpt->posPrev < cur && nextOpt->backPrev == 0))
-+ {
-+ UInt32 shortRepPrice = repMatchPrice + GetRepLen1Price(p, state, posState);
-+ if (shortRepPrice <= nextOpt->price)
-+ {
-+ nextOpt->price = shortRepPrice;
-+ nextOpt->posPrev = cur;
-+ MakeAsShortRep(nextOpt);
-+ nextIsChar = True;
-+ }
-+ }
-+ numAvailFull = p->numAvail;
-+ {
-+ UInt32 temp = kNumOpts - 1 - cur;
-+ if (temp < numAvailFull)
-+ numAvailFull = temp;
-+ }
-+
-+ if (numAvailFull < 2)
-+ continue;
-+ numAvail = (numAvailFull <= p->numFastBytes ? numAvailFull : p->numFastBytes);
-+
-+ if (!nextIsChar && matchByte != curByte) /* speed optimization */
-+ {
-+ /* try Literal + rep0 */
-+ UInt32 temp;
-+ UInt32 lenTest2;
-+ const Byte *data2 = data - (reps[0] + 1);
-+ UInt32 limit = p->numFastBytes + 1;
-+ if (limit > numAvailFull)
-+ limit = numAvailFull;
-+
-+ for (temp = 1; temp < limit && data[temp] == data2[temp]; temp++);
-+ lenTest2 = temp - 1;
-+ if (lenTest2 >= 2)
-+ {
-+ UInt32 state2 = kLiteralNextStates[state];
-+ UInt32 posStateNext = (position + 1) & p->pbMask;
-+ UInt32 nextRepMatchPrice = curAnd1Price +
-+ GET_PRICE_1(p->isMatch[state2][posStateNext]) +
-+ GET_PRICE_1(p->isRep[state2]);
-+ /* for (; lenTest2 >= 2; lenTest2--) */
-+ {
-+ UInt32 curAndLenPrice;
-+ COptimal *opt;
-+ UInt32 offset = cur + 1 + lenTest2;
-+ while (lenEnd < offset)
-+ p->opt[++lenEnd].price = kInfinityPrice;
-+ curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext);
-+ opt = &p->opt[offset];
-+ if (curAndLenPrice < opt->price)
-+ {
-+ opt->price = curAndLenPrice;
-+ opt->posPrev = cur + 1;
-+ opt->backPrev = 0;
-+ opt->prev1IsChar = True;
-+ opt->prev2 = False;
-+ }
-+ }
-+ }
-+ }
-+
-+ startLen = 2; /* speed optimization */
-+ {
-+ UInt32 repIndex;
-+ for (repIndex = 0; repIndex < LZMA_NUM_REPS; repIndex++)
-+ {
-+ UInt32 lenTest;
-+ UInt32 lenTestTemp;
-+ UInt32 price;
-+ const Byte *data2 = data - (reps[repIndex] + 1);
-+ if (data[0] != data2[0] || data[1] != data2[1])
-+ continue;
-+ for (lenTest = 2; lenTest < numAvail && data[lenTest] == data2[lenTest]; lenTest++);
-+ while (lenEnd < cur + lenTest)
-+ p->opt[++lenEnd].price = kInfinityPrice;
-+ lenTestTemp = lenTest;
-+ price = repMatchPrice + GetPureRepPrice(p, repIndex, state, posState);
-+ do
-+ {
-+ UInt32 curAndLenPrice = price + p->repLenEnc.prices[posState][lenTest - 2];
-+ COptimal *opt = &p->opt[cur + lenTest];
-+ if (curAndLenPrice < opt->price)
-+ {
-+ opt->price = curAndLenPrice;
-+ opt->posPrev = cur;
-+ opt->backPrev = repIndex;
-+ opt->prev1IsChar = False;
-+ }
-+ }
-+ while (--lenTest >= 2);
-+ lenTest = lenTestTemp;
-+
-+ if (repIndex == 0)
-+ startLen = lenTest + 1;
-+
-+ /* if (_maxMode) */
-+ {
-+ UInt32 lenTest2 = lenTest + 1;
-+ UInt32 limit = lenTest2 + p->numFastBytes;
-+ UInt32 nextRepMatchPrice;
-+ if (limit > numAvailFull)
-+ limit = numAvailFull;
-+ for (; lenTest2 < limit && data[lenTest2] == data2[lenTest2]; lenTest2++);
-+ lenTest2 -= lenTest + 1;
-+ if (lenTest2 >= 2)
-+ {
-+ UInt32 state2 = kRepNextStates[state];
-+ UInt32 posStateNext = (position + lenTest) & p->pbMask;
-+ UInt32 curAndLenCharPrice =
-+ price + p->repLenEnc.prices[posState][lenTest - 2] +
-+ GET_PRICE_0(p->isMatch[state2][posStateNext]) +
-+ LitEnc_GetPriceMatched(LIT_PROBS(position + lenTest, data[lenTest - 1]),
-+ data[lenTest], data2[lenTest], p->ProbPrices);
-+ state2 = kLiteralNextStates[state2];
-+ posStateNext = (position + lenTest + 1) & p->pbMask;
-+ nextRepMatchPrice = curAndLenCharPrice +
-+ GET_PRICE_1(p->isMatch[state2][posStateNext]) +
-+ GET_PRICE_1(p->isRep[state2]);
-+
-+ /* for (; lenTest2 >= 2; lenTest2--) */
-+ {
-+ UInt32 curAndLenPrice;
-+ COptimal *opt;
-+ UInt32 offset = cur + lenTest + 1 + lenTest2;
-+ while (lenEnd < offset)
-+ p->opt[++lenEnd].price = kInfinityPrice;
-+ curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext);
-+ opt = &p->opt[offset];
-+ if (curAndLenPrice < opt->price)
-+ {
-+ opt->price = curAndLenPrice;
-+ opt->posPrev = cur + lenTest + 1;
-+ opt->backPrev = 0;
-+ opt->prev1IsChar = True;
-+ opt->prev2 = True;
-+ opt->posPrev2 = cur;
-+ opt->backPrev2 = repIndex;
-+ }
-+ }
-+ }
-+ }
-+ }
-+ }
-+ /* for (UInt32 lenTest = 2; lenTest <= newLen; lenTest++) */
-+ if (newLen > numAvail)
-+ {
-+ newLen = numAvail;
-+ for (numPairs = 0; newLen > matches[numPairs]; numPairs += 2);
-+ matches[numPairs] = newLen;
-+ numPairs += 2;
-+ }
-+ if (newLen >= startLen)
-+ {
-+ UInt32 normalMatchPrice = matchPrice + GET_PRICE_0(p->isRep[state]);
-+ UInt32 offs, curBack, posSlot;
-+ UInt32 lenTest;
-+ while (lenEnd < cur + newLen)
-+ p->opt[++lenEnd].price = kInfinityPrice;
-+
-+ offs = 0;
-+ while (startLen > matches[offs])
-+ offs += 2;
-+ curBack = matches[offs + 1];
-+ GetPosSlot2(curBack, posSlot);
-+ for (lenTest = /*2*/ startLen; ; lenTest++)
-+ {
-+ UInt32 curAndLenPrice = normalMatchPrice + p->lenEnc.prices[posState][lenTest - LZMA_MATCH_LEN_MIN];
-+ UInt32 lenToPosState = GetLenToPosState(lenTest);
-+ COptimal *opt;
-+ if (curBack < kNumFullDistances)
-+ curAndLenPrice += p->distancesPrices[lenToPosState][curBack];
-+ else
-+ curAndLenPrice += p->posSlotPrices[lenToPosState][posSlot] + p->alignPrices[curBack & kAlignMask];
-+
-+ opt = &p->opt[cur + lenTest];
-+ if (curAndLenPrice < opt->price)
-+ {
-+ opt->price = curAndLenPrice;
-+ opt->posPrev = cur;
-+ opt->backPrev = curBack + LZMA_NUM_REPS;
-+ opt->prev1IsChar = False;
-+ }
-+
-+ if (/*_maxMode && */lenTest == matches[offs])
-+ {
-+ /* Try Match + Literal + Rep0 */
-+ const Byte *data2 = data - (curBack + 1);
-+ UInt32 lenTest2 = lenTest + 1;
-+ UInt32 limit = lenTest2 + p->numFastBytes;
-+ UInt32 nextRepMatchPrice;
-+ if (limit > numAvailFull)
-+ limit = numAvailFull;
-+ for (; lenTest2 < limit && data[lenTest2] == data2[lenTest2]; lenTest2++);
-+ lenTest2 -= lenTest + 1;
-+ if (lenTest2 >= 2)
-+ {
-+ UInt32 state2 = kMatchNextStates[state];
-+ UInt32 posStateNext = (position + lenTest) & p->pbMask;
-+ UInt32 curAndLenCharPrice = curAndLenPrice +
-+ GET_PRICE_0(p->isMatch[state2][posStateNext]) +
-+ LitEnc_GetPriceMatched(LIT_PROBS(position + lenTest, data[lenTest - 1]),
-+ data[lenTest], data2[lenTest], p->ProbPrices);
-+ state2 = kLiteralNextStates[state2];
-+ posStateNext = (posStateNext + 1) & p->pbMask;
-+ nextRepMatchPrice = curAndLenCharPrice +
-+ GET_PRICE_1(p->isMatch[state2][posStateNext]) +
-+ GET_PRICE_1(p->isRep[state2]);
-+
-+ /* for (; lenTest2 >= 2; lenTest2--) */
-+ {
-+ UInt32 offset = cur + lenTest + 1 + lenTest2;
-+ UInt32 curAndLenPrice;
-+ COptimal *opt;
-+ while (lenEnd < offset)
-+ p->opt[++lenEnd].price = kInfinityPrice;
-+ curAndLenPrice = nextRepMatchPrice + GetRepPrice(p, 0, lenTest2, state2, posStateNext);
-+ opt = &p->opt[offset];
-+ if (curAndLenPrice < opt->price)
-+ {
-+ opt->price = curAndLenPrice;
-+ opt->posPrev = cur + lenTest + 1;
-+ opt->backPrev = 0;
-+ opt->prev1IsChar = True;
-+ opt->prev2 = True;
-+ opt->posPrev2 = cur;
-+ opt->backPrev2 = curBack + LZMA_NUM_REPS;
-+ }
-+ }
-+ }
-+ offs += 2;
-+ if (offs == numPairs)
-+ break;
-+ curBack = matches[offs + 1];
-+ if (curBack >= kNumFullDistances)
-+ GetPosSlot2(curBack, posSlot);
-+ }
-+ }
-+ }
-+ }
-+}
-+
-+#define ChangePair(smallDist, bigDist) (((bigDist) >> 7) > (smallDist))
-+
-+static UInt32 GetOptimumFast(CLzmaEnc *p, UInt32 *backRes)
-+{
-+ UInt32 numAvail, mainLen, mainDist, numPairs, repIndex, repLen, i;
-+ const Byte *data;
-+ const UInt32 *matches;
-+
-+ if (p->additionalOffset == 0)
-+ mainLen = ReadMatchDistances(p, &numPairs);
-+ else
-+ {
-+ mainLen = p->longestMatchLength;
-+ numPairs = p->numPairs;
-+ }
-+
-+ numAvail = p->numAvail;
-+ *backRes = (UInt32)-1;
-+ if (numAvail < 2)
-+ return 1;
-+ if (numAvail > LZMA_MATCH_LEN_MAX)
-+ numAvail = LZMA_MATCH_LEN_MAX;
-+ data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
-+
-+ repLen = repIndex = 0;
-+ for (i = 0; i < LZMA_NUM_REPS; i++)
-+ {
-+ UInt32 len;
-+ const Byte *data2 = data - (p->reps[i] + 1);
-+ if (data[0] != data2[0] || data[1] != data2[1])
-+ continue;
-+ for (len = 2; len < numAvail && data[len] == data2[len]; len++);
-+ if (len >= p->numFastBytes)
-+ {
-+ *backRes = i;
-+ MovePos(p, len - 1);
-+ return len;
-+ }
-+ if (len > repLen)
-+ {
-+ repIndex = i;
-+ repLen = len;
-+ }
-+ }
-+
-+ matches = p->matches;
-+ if (mainLen >= p->numFastBytes)
-+ {
-+ *backRes = matches[numPairs - 1] + LZMA_NUM_REPS;
-+ MovePos(p, mainLen - 1);
-+ return mainLen;
-+ }
-+
-+ mainDist = 0; /* for GCC */
-+ if (mainLen >= 2)
-+ {
-+ mainDist = matches[numPairs - 1];
-+ while (numPairs > 2 && mainLen == matches[numPairs - 4] + 1)
-+ {
-+ if (!ChangePair(matches[numPairs - 3], mainDist))
-+ break;
-+ numPairs -= 2;
-+ mainLen = matches[numPairs - 2];
-+ mainDist = matches[numPairs - 1];
-+ }
-+ if (mainLen == 2 && mainDist >= 0x80)
-+ mainLen = 1;
-+ }
-+
-+ if (repLen >= 2 && (
-+ (repLen + 1 >= mainLen) ||
-+ (repLen + 2 >= mainLen && mainDist >= (1 << 9)) ||
-+ (repLen + 3 >= mainLen && mainDist >= (1 << 15))))
-+ {
-+ *backRes = repIndex;
-+ MovePos(p, repLen - 1);
-+ return repLen;
-+ }
-+
-+ if (mainLen < 2 || numAvail <= 2)
-+ return 1;
-+
-+ p->longestMatchLength = ReadMatchDistances(p, &p->numPairs);
-+ if (p->longestMatchLength >= 2)
-+ {
-+ UInt32 newDistance = matches[p->numPairs - 1];
-+ if ((p->longestMatchLength >= mainLen && newDistance < mainDist) ||
-+ (p->longestMatchLength == mainLen + 1 && !ChangePair(mainDist, newDistance)) ||
-+ (p->longestMatchLength > mainLen + 1) ||
-+ (p->longestMatchLength + 1 >= mainLen && mainLen >= 3 && ChangePair(newDistance, mainDist)))
-+ return 1;
-+ }
-+
-+ data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - 1;
-+ for (i = 0; i < LZMA_NUM_REPS; i++)
-+ {
-+ UInt32 len, limit;
-+ const Byte *data2 = data - (p->reps[i] + 1);
-+ if (data[0] != data2[0] || data[1] != data2[1])
-+ continue;
-+ limit = mainLen - 1;
-+ for (len = 2; len < limit && data[len] == data2[len]; len++);
-+ if (len >= limit)
-+ return 1;
-+ }
-+ *backRes = mainDist + LZMA_NUM_REPS;
-+ MovePos(p, mainLen - 2);
-+ return mainLen;
-+}
-+
-+static void WriteEndMarker(CLzmaEnc *p, UInt32 posState)
-+{
-+ UInt32 len;
-+ RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 1);
-+ RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 0);
-+ p->state = kMatchNextStates[p->state];
-+ len = LZMA_MATCH_LEN_MIN;
-+ LenEnc_Encode2(&p->lenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices);
-+ RcTree_Encode(&p->rc, p->posSlotEncoder[GetLenToPosState(len)], kNumPosSlotBits, (1 << kNumPosSlotBits) - 1);
-+ RangeEnc_EncodeDirectBits(&p->rc, (((UInt32)1 << 30) - 1) >> kNumAlignBits, 30 - kNumAlignBits);
-+ RcTree_ReverseEncode(&p->rc, p->posAlignEncoder, kNumAlignBits, kAlignMask);
-+}
-+
-+static SRes CheckErrors(CLzmaEnc *p)
-+{
-+ if (p->result != SZ_OK)
-+ return p->result;
-+ if (p->rc.res != SZ_OK)
-+ p->result = SZ_ERROR_WRITE;
-+ if (p->matchFinderBase.result != SZ_OK)
-+ p->result = SZ_ERROR_READ;
-+ if (p->result != SZ_OK)
-+ p->finished = True;
-+ return p->result;
-+}
-+
-+static SRes Flush(CLzmaEnc *p, UInt32 nowPos)
-+{
-+ /* ReleaseMFStream(); */
-+ p->finished = True;
-+ if (p->writeEndMark)
-+ WriteEndMarker(p, nowPos & p->pbMask);
-+ RangeEnc_FlushData(&p->rc);
-+ RangeEnc_FlushStream(&p->rc);
-+ return CheckErrors(p);
-+}
-+
-+static void FillAlignPrices(CLzmaEnc *p)
-+{
-+ UInt32 i;
-+ for (i = 0; i < kAlignTableSize; i++)
-+ p->alignPrices[i] = RcTree_ReverseGetPrice(p->posAlignEncoder, kNumAlignBits, i, p->ProbPrices);
-+ p->alignPriceCount = 0;
-+}
-+
-+static void FillDistancesPrices(CLzmaEnc *p)
-+{
-+ UInt32 tempPrices[kNumFullDistances];
-+ UInt32 i, lenToPosState;
-+ for (i = kStartPosModelIndex; i < kNumFullDistances; i++)
-+ {
-+ UInt32 posSlot = GetPosSlot1(i);
-+ UInt32 footerBits = ((posSlot >> 1) - 1);
-+ UInt32 base = ((2 | (posSlot & 1)) << footerBits);
-+ tempPrices[i] = RcTree_ReverseGetPrice(p->posEncoders + base - posSlot - 1, footerBits, i - base, p->ProbPrices);
-+ }
-+
-+ for (lenToPosState = 0; lenToPosState < kNumLenToPosStates; lenToPosState++)
-+ {
-+ UInt32 posSlot;
-+ const CLzmaProb *encoder = p->posSlotEncoder[lenToPosState];
-+ UInt32 *posSlotPrices = p->posSlotPrices[lenToPosState];
-+ for (posSlot = 0; posSlot < p->distTableSize; posSlot++)
-+ posSlotPrices[posSlot] = RcTree_GetPrice(encoder, kNumPosSlotBits, posSlot, p->ProbPrices);
-+ for (posSlot = kEndPosModelIndex; posSlot < p->distTableSize; posSlot++)
-+ posSlotPrices[posSlot] += ((((posSlot >> 1) - 1) - kNumAlignBits) << kNumBitPriceShiftBits);
-+
-+ {
-+ UInt32 *distancesPrices = p->distancesPrices[lenToPosState];
-+ UInt32 i;
-+ for (i = 0; i < kStartPosModelIndex; i++)
-+ distancesPrices[i] = posSlotPrices[i];
-+ for (; i < kNumFullDistances; i++)
-+ distancesPrices[i] = posSlotPrices[GetPosSlot1(i)] + tempPrices[i];
-+ }
-+ }
-+ p->matchPriceCount = 0;
-+}
-+
-+void LzmaEnc_Construct(CLzmaEnc *p)
-+{
-+ RangeEnc_Construct(&p->rc);
-+ MatchFinder_Construct(&p->matchFinderBase);
-+ #ifndef _7ZIP_ST
-+ MatchFinderMt_Construct(&p->matchFinderMt);
-+ p->matchFinderMt.MatchFinder = &p->matchFinderBase;
-+ #endif
-+
-+ {
-+ CLzmaEncProps props;
-+ LzmaEncProps_Init(&props);
-+ LzmaEnc_SetProps(p, &props);
-+ }
-+
-+ #ifndef LZMA_LOG_BSR
-+ LzmaEnc_FastPosInit(p->g_FastPos);
-+ #endif
-+
-+ LzmaEnc_InitPriceTables(p->ProbPrices);
-+ p->litProbs = 0;
-+ p->saveState.litProbs = 0;
-+}
-+
-+CLzmaEncHandle LzmaEnc_Create(ISzAlloc *alloc)
-+{
-+ void *p;
-+ p = alloc->Alloc(alloc, sizeof(CLzmaEnc));
-+ if (p != 0)
-+ LzmaEnc_Construct((CLzmaEnc *)p);
-+ return p;
-+}
-+
-+void LzmaEnc_FreeLits(CLzmaEnc *p, ISzAlloc *alloc)
-+{
-+ alloc->Free(alloc, p->litProbs);
-+ alloc->Free(alloc, p->saveState.litProbs);
-+ p->litProbs = 0;
-+ p->saveState.litProbs = 0;
-+}
-+
-+void LzmaEnc_Destruct(CLzmaEnc *p, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+ #ifndef _7ZIP_ST
-+ MatchFinderMt_Destruct(&p->matchFinderMt, allocBig);
-+ #endif
-+ MatchFinder_Free(&p->matchFinderBase, allocBig);
-+ LzmaEnc_FreeLits(p, alloc);
-+ RangeEnc_Free(&p->rc, alloc);
-+}
-+
-+void LzmaEnc_Destroy(CLzmaEncHandle p, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+ LzmaEnc_Destruct((CLzmaEnc *)p, alloc, allocBig);
-+ alloc->Free(alloc, p);
-+}
-+
-+static SRes LzmaEnc_CodeOneBlock(CLzmaEnc *p, Bool useLimits, UInt32 maxPackSize, UInt32 maxUnpackSize)
-+{
-+ UInt32 nowPos32, startPos32;
-+ if (p->needInit)
-+ {
-+ p->matchFinder.Init(p->matchFinderObj);
-+ p->needInit = 0;
-+ }
-+
-+ if (p->finished)
-+ return p->result;
-+ RINOK(CheckErrors(p));
-+
-+ nowPos32 = (UInt32)p->nowPos64;
-+ startPos32 = nowPos32;
-+
-+ if (p->nowPos64 == 0)
-+ {
-+ UInt32 numPairs;
-+ Byte curByte;
-+ if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) == 0)
-+ return Flush(p, nowPos32);
-+ ReadMatchDistances(p, &numPairs);
-+ RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][0], 0);
-+ p->state = kLiteralNextStates[p->state];
-+ curByte = p->matchFinder.GetIndexByte(p->matchFinderObj, 0 - p->additionalOffset);
-+ LitEnc_Encode(&p->rc, p->litProbs, curByte);
-+ p->additionalOffset--;
-+ nowPos32++;
-+ }
-+
-+ if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) != 0)
-+ for (;;)
-+ {
-+ UInt32 pos, len, posState;
-+
-+ if (p->fastMode)
-+ len = GetOptimumFast(p, &pos);
-+ else
-+ len = GetOptimum(p, nowPos32, &pos);
-+
-+ #ifdef SHOW_STAT2
-+ printf("\n pos = %4X, len = %d pos = %d", nowPos32, len, pos);
-+ #endif
-+
-+ posState = nowPos32 & p->pbMask;
-+ if (len == 1 && pos == (UInt32)-1)
-+ {
-+ Byte curByte;
-+ CLzmaProb *probs;
-+ const Byte *data;
-+
-+ RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 0);
-+ data = p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset;
-+ curByte = *data;
-+ probs = LIT_PROBS(nowPos32, *(data - 1));
-+ if (IsCharState(p->state))
-+ LitEnc_Encode(&p->rc, probs, curByte);
-+ else
-+ LitEnc_EncodeMatched(&p->rc, probs, curByte, *(data - p->reps[0] - 1));
-+ p->state = kLiteralNextStates[p->state];
-+ }
-+ else
-+ {
-+ RangeEnc_EncodeBit(&p->rc, &p->isMatch[p->state][posState], 1);
-+ if (pos < LZMA_NUM_REPS)
-+ {
-+ RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 1);
-+ if (pos == 0)
-+ {
-+ RangeEnc_EncodeBit(&p->rc, &p->isRepG0[p->state], 0);
-+ RangeEnc_EncodeBit(&p->rc, &p->isRep0Long[p->state][posState], ((len == 1) ? 0 : 1));
-+ }
-+ else
-+ {
-+ UInt32 distance = p->reps[pos];
-+ RangeEnc_EncodeBit(&p->rc, &p->isRepG0[p->state], 1);
-+ if (pos == 1)
-+ RangeEnc_EncodeBit(&p->rc, &p->isRepG1[p->state], 0);
-+ else
-+ {
-+ RangeEnc_EncodeBit(&p->rc, &p->isRepG1[p->state], 1);
-+ RangeEnc_EncodeBit(&p->rc, &p->isRepG2[p->state], pos - 2);
-+ if (pos == 3)
-+ p->reps[3] = p->reps[2];
-+ p->reps[2] = p->reps[1];
-+ }
-+ p->reps[1] = p->reps[0];
-+ p->reps[0] = distance;
-+ }
-+ if (len == 1)
-+ p->state = kShortRepNextStates[p->state];
-+ else
-+ {
-+ LenEnc_Encode2(&p->repLenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices);
-+ p->state = kRepNextStates[p->state];
-+ }
-+ }
-+ else
-+ {
-+ UInt32 posSlot;
-+ RangeEnc_EncodeBit(&p->rc, &p->isRep[p->state], 0);
-+ p->state = kMatchNextStates[p->state];
-+ LenEnc_Encode2(&p->lenEnc, &p->rc, len - LZMA_MATCH_LEN_MIN, posState, !p->fastMode, p->ProbPrices);
-+ pos -= LZMA_NUM_REPS;
-+ GetPosSlot(pos, posSlot);
-+ RcTree_Encode(&p->rc, p->posSlotEncoder[GetLenToPosState(len)], kNumPosSlotBits, posSlot);
-+
-+ if (posSlot >= kStartPosModelIndex)
-+ {
-+ UInt32 footerBits = ((posSlot >> 1) - 1);
-+ UInt32 base = ((2 | (posSlot & 1)) << footerBits);
-+ UInt32 posReduced = pos - base;
-+
-+ if (posSlot < kEndPosModelIndex)
-+ RcTree_ReverseEncode(&p->rc, p->posEncoders + base - posSlot - 1, footerBits, posReduced);
-+ else
-+ {
-+ RangeEnc_EncodeDirectBits(&p->rc, posReduced >> kNumAlignBits, footerBits - kNumAlignBits);
-+ RcTree_ReverseEncode(&p->rc, p->posAlignEncoder, kNumAlignBits, posReduced & kAlignMask);
-+ p->alignPriceCount++;
-+ }
-+ }
-+ p->reps[3] = p->reps[2];
-+ p->reps[2] = p->reps[1];
-+ p->reps[1] = p->reps[0];
-+ p->reps[0] = pos;
-+ p->matchPriceCount++;
-+ }
-+ }
-+ p->additionalOffset -= len;
-+ nowPos32 += len;
-+ if (p->additionalOffset == 0)
-+ {
-+ UInt32 processed;
-+ if (!p->fastMode)
-+ {
-+ if (p->matchPriceCount >= (1 << 7))
-+ FillDistancesPrices(p);
-+ if (p->alignPriceCount >= kAlignTableSize)
-+ FillAlignPrices(p);
-+ }
-+ if (p->matchFinder.GetNumAvailableBytes(p->matchFinderObj) == 0)
-+ break;
-+ processed = nowPos32 - startPos32;
-+ if (useLimits)
-+ {
-+ if (processed + kNumOpts + 300 >= maxUnpackSize ||
-+ RangeEnc_GetProcessed(&p->rc) + kNumOpts * 2 >= maxPackSize)
-+ break;
-+ }
-+ else if (processed >= (1 << 15))
-+ {
-+ p->nowPos64 += nowPos32 - startPos32;
-+ return CheckErrors(p);
-+ }
-+ }
-+ }
-+ p->nowPos64 += nowPos32 - startPos32;
-+ return Flush(p, nowPos32);
-+}
-+
-+#define kBigHashDicLimit ((UInt32)1 << 24)
-+
-+static SRes LzmaEnc_Alloc(CLzmaEnc *p, UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+ UInt32 beforeSize = kNumOpts;
-+ Bool btMode;
-+ if (!RangeEnc_Alloc(&p->rc, alloc))
-+ return SZ_ERROR_MEM;
-+ btMode = (p->matchFinderBase.btMode != 0);
-+ #ifndef _7ZIP_ST
-+ p->mtMode = (p->multiThread && !p->fastMode && btMode);
-+ #endif
-+
-+ {
-+ unsigned lclp = p->lc + p->lp;
-+ if (p->litProbs == 0 || p->saveState.litProbs == 0 || p->lclp != lclp)
-+ {
-+ LzmaEnc_FreeLits(p, alloc);
-+ p->litProbs = (CLzmaProb *)alloc->Alloc(alloc, (0x300 << lclp) * sizeof(CLzmaProb));
-+ p->saveState.litProbs = (CLzmaProb *)alloc->Alloc(alloc, (0x300 << lclp) * sizeof(CLzmaProb));
-+ if (p->litProbs == 0 || p->saveState.litProbs == 0)
-+ {
-+ LzmaEnc_FreeLits(p, alloc);
-+ return SZ_ERROR_MEM;
-+ }
-+ p->lclp = lclp;
-+ }
-+ }
-+
-+ p->matchFinderBase.bigHash = (p->dictSize > kBigHashDicLimit);
-+
-+ if (beforeSize + p->dictSize < keepWindowSize)
-+ beforeSize = keepWindowSize - p->dictSize;
-+
-+ #ifndef _7ZIP_ST
-+ if (p->mtMode)
-+ {
-+ RINOK(MatchFinderMt_Create(&p->matchFinderMt, p->dictSize, beforeSize, p->numFastBytes, LZMA_MATCH_LEN_MAX, allocBig));
-+ p->matchFinderObj = &p->matchFinderMt;
-+ MatchFinderMt_CreateVTable(&p->matchFinderMt, &p->matchFinder);
-+ }
-+ else
-+ #endif
-+ {
-+ if (!MatchFinder_Create(&p->matchFinderBase, p->dictSize, beforeSize, p->numFastBytes, LZMA_MATCH_LEN_MAX, allocBig))
-+ return SZ_ERROR_MEM;
-+ p->matchFinderObj = &p->matchFinderBase;
-+ MatchFinder_CreateVTable(&p->matchFinderBase, &p->matchFinder);
-+ }
-+ return SZ_OK;
-+}
-+
-+void LzmaEnc_Init(CLzmaEnc *p)
-+{
-+ UInt32 i;
-+ p->state = 0;
-+ for (i = 0 ; i < LZMA_NUM_REPS; i++)
-+ p->reps[i] = 0;
-+
-+ RangeEnc_Init(&p->rc);
-+
-+
-+ for (i = 0; i < kNumStates; i++)
-+ {
-+ UInt32 j;
-+ for (j = 0; j < LZMA_NUM_PB_STATES_MAX; j++)
-+ {
-+ p->isMatch[i][j] = kProbInitValue;
-+ p->isRep0Long[i][j] = kProbInitValue;
-+ }
-+ p->isRep[i] = kProbInitValue;
-+ p->isRepG0[i] = kProbInitValue;
-+ p->isRepG1[i] = kProbInitValue;
-+ p->isRepG2[i] = kProbInitValue;
-+ }
-+
-+ {
-+ UInt32 num = 0x300 << (p->lp + p->lc);
-+ for (i = 0; i < num; i++)
-+ p->litProbs[i] = kProbInitValue;
-+ }
-+
-+ {
-+ for (i = 0; i < kNumLenToPosStates; i++)
-+ {
-+ CLzmaProb *probs = p->posSlotEncoder[i];
-+ UInt32 j;
-+ for (j = 0; j < (1 << kNumPosSlotBits); j++)
-+ probs[j] = kProbInitValue;
-+ }
-+ }
-+ {
-+ for (i = 0; i < kNumFullDistances - kEndPosModelIndex; i++)
-+ p->posEncoders[i] = kProbInitValue;
-+ }
-+
-+ LenEnc_Init(&p->lenEnc.p);
-+ LenEnc_Init(&p->repLenEnc.p);
-+
-+ for (i = 0; i < (1 << kNumAlignBits); i++)
-+ p->posAlignEncoder[i] = kProbInitValue;
-+
-+ p->optimumEndIndex = 0;
-+ p->optimumCurrentIndex = 0;
-+ p->additionalOffset = 0;
-+
-+ p->pbMask = (1 << p->pb) - 1;
-+ p->lpMask = (1 << p->lp) - 1;
-+}
-+
-+void LzmaEnc_InitPrices(CLzmaEnc *p)
-+{
-+ if (!p->fastMode)
-+ {
-+ FillDistancesPrices(p);
-+ FillAlignPrices(p);
-+ }
-+
-+ p->lenEnc.tableSize =
-+ p->repLenEnc.tableSize =
-+ p->numFastBytes + 1 - LZMA_MATCH_LEN_MIN;
-+ LenPriceEnc_UpdateTables(&p->lenEnc, 1 << p->pb, p->ProbPrices);
-+ LenPriceEnc_UpdateTables(&p->repLenEnc, 1 << p->pb, p->ProbPrices);
-+}
-+
-+static SRes LzmaEnc_AllocAndInit(CLzmaEnc *p, UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+ UInt32 i;
-+ for (i = 0; i < (UInt32)kDicLogSizeMaxCompress; i++)
-+ if (p->dictSize <= ((UInt32)1 << i))
-+ break;
-+ p->distTableSize = i * 2;
-+
-+ p->finished = False;
-+ p->result = SZ_OK;
-+ RINOK(LzmaEnc_Alloc(p, keepWindowSize, alloc, allocBig));
-+ LzmaEnc_Init(p);
-+ LzmaEnc_InitPrices(p);
-+ p->nowPos64 = 0;
-+ return SZ_OK;
-+}
-+
-+static SRes LzmaEnc_Prepare(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream,
-+ ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+ CLzmaEnc *p = (CLzmaEnc *)pp;
-+ p->matchFinderBase.stream = inStream;
-+ p->needInit = 1;
-+ p->rc.outStream = outStream;
-+ return LzmaEnc_AllocAndInit(p, 0, alloc, allocBig);
-+}
-+
-+SRes LzmaEnc_PrepareForLzma2(CLzmaEncHandle pp,
-+ ISeqInStream *inStream, UInt32 keepWindowSize,
-+ ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+ CLzmaEnc *p = (CLzmaEnc *)pp;
-+ p->matchFinderBase.stream = inStream;
-+ p->needInit = 1;
-+ return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig);
-+}
-+
-+static void LzmaEnc_SetInputBuf(CLzmaEnc *p, const Byte *src, SizeT srcLen)
-+{
-+ p->matchFinderBase.directInput = 1;
-+ p->matchFinderBase.bufferBase = (Byte *)src;
-+ p->matchFinderBase.directInputRem = srcLen;
-+}
-+
-+SRes LzmaEnc_MemPrepare(CLzmaEncHandle pp, const Byte *src, SizeT srcLen,
-+ UInt32 keepWindowSize, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+ CLzmaEnc *p = (CLzmaEnc *)pp;
-+ LzmaEnc_SetInputBuf(p, src, srcLen);
-+ p->needInit = 1;
-+
-+ return LzmaEnc_AllocAndInit(p, keepWindowSize, alloc, allocBig);
-+}
-+
-+void LzmaEnc_Finish(CLzmaEncHandle pp)
-+{
-+ #ifndef _7ZIP_ST
-+ CLzmaEnc *p = (CLzmaEnc *)pp;
-+ if (p->mtMode)
-+ MatchFinderMt_ReleaseStream(&p->matchFinderMt);
-+ #else
-+ pp = pp;
-+ #endif
-+}
-+
-+typedef struct
-+{
-+ ISeqOutStream funcTable;
-+ Byte *data;
-+ SizeT rem;
-+ Bool overflow;
-+} CSeqOutStreamBuf;
-+
-+static size_t MyWrite(void *pp, const void *data, size_t size)
-+{
-+ CSeqOutStreamBuf *p = (CSeqOutStreamBuf *)pp;
-+ if (p->rem < size)
-+ {
-+ size = p->rem;
-+ p->overflow = True;
-+ }
-+ memcpy(p->data, data, size);
-+ p->rem -= size;
-+ p->data += size;
-+ return size;
-+}
-+
-+
-+UInt32 LzmaEnc_GetNumAvailableBytes(CLzmaEncHandle pp)
-+{
-+ const CLzmaEnc *p = (CLzmaEnc *)pp;
-+ return p->matchFinder.GetNumAvailableBytes(p->matchFinderObj);
-+}
-+
-+const Byte *LzmaEnc_GetCurBuf(CLzmaEncHandle pp)
-+{
-+ const CLzmaEnc *p = (CLzmaEnc *)pp;
-+ return p->matchFinder.GetPointerToCurrentPos(p->matchFinderObj) - p->additionalOffset;
-+}
-+
-+SRes LzmaEnc_CodeOneMemBlock(CLzmaEncHandle pp, Bool reInit,
-+ Byte *dest, size_t *destLen, UInt32 desiredPackSize, UInt32 *unpackSize)
-+{
-+ CLzmaEnc *p = (CLzmaEnc *)pp;
-+ UInt64 nowPos64;
-+ SRes res;
-+ CSeqOutStreamBuf outStream;
-+
-+ outStream.funcTable.Write = MyWrite;
-+ outStream.data = dest;
-+ outStream.rem = *destLen;
-+ outStream.overflow = False;
-+
-+ p->writeEndMark = False;
-+ p->finished = False;
-+ p->result = SZ_OK;
-+
-+ if (reInit)
-+ LzmaEnc_Init(p);
-+ LzmaEnc_InitPrices(p);
-+ nowPos64 = p->nowPos64;
-+ RangeEnc_Init(&p->rc);
-+ p->rc.outStream = &outStream.funcTable;
-+
-+ res = LzmaEnc_CodeOneBlock(p, True, desiredPackSize, *unpackSize);
-+
-+ *unpackSize = (UInt32)(p->nowPos64 - nowPos64);
-+ *destLen -= outStream.rem;
-+ if (outStream.overflow)
-+ return SZ_ERROR_OUTPUT_EOF;
-+
-+ return res;
-+}
-+
-+static SRes LzmaEnc_Encode2(CLzmaEnc *p, ICompressProgress *progress)
-+{
-+ SRes res = SZ_OK;
-+
-+ #ifndef _7ZIP_ST
-+ Byte allocaDummy[0x300];
-+ int i = 0;
-+ for (i = 0; i < 16; i++)
-+ allocaDummy[i] = (Byte)i;
-+ #endif
-+
-+ for (;;)
-+ {
-+ res = LzmaEnc_CodeOneBlock(p, False, 0, 0);
-+ if (res != SZ_OK || p->finished != 0)
-+ break;
-+ if (progress != 0)
-+ {
-+ res = progress->Progress(progress, p->nowPos64, RangeEnc_GetProcessed(&p->rc));
-+ if (res != SZ_OK)
-+ {
-+ res = SZ_ERROR_PROGRESS;
-+ break;
-+ }
-+ }
-+ }
-+ LzmaEnc_Finish(p);
-+ return res;
-+}
-+
-+SRes LzmaEnc_Encode(CLzmaEncHandle pp, ISeqOutStream *outStream, ISeqInStream *inStream, ICompressProgress *progress,
-+ ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+ RINOK(LzmaEnc_Prepare(pp, outStream, inStream, alloc, allocBig));
-+ return LzmaEnc_Encode2((CLzmaEnc *)pp, progress);
-+}
-+
-+SRes LzmaEnc_WriteProperties(CLzmaEncHandle pp, Byte *props, SizeT *size)
-+{
-+ CLzmaEnc *p = (CLzmaEnc *)pp;
-+ int i;
-+ UInt32 dictSize = p->dictSize;
-+ if (*size < LZMA_PROPS_SIZE)
-+ return SZ_ERROR_PARAM;
-+ *size = LZMA_PROPS_SIZE;
-+ props[0] = (Byte)((p->pb * 5 + p->lp) * 9 + p->lc);
-+
-+ for (i = 11; i <= 30; i++)
-+ {
-+ if (dictSize <= ((UInt32)2 << i))
-+ {
-+ dictSize = (2 << i);
-+ break;
-+ }
-+ if (dictSize <= ((UInt32)3 << i))
-+ {
-+ dictSize = (3 << i);
-+ break;
-+ }
-+ }
-+
-+ for (i = 0; i < 4; i++)
-+ props[1 + i] = (Byte)(dictSize >> (8 * i));
-+ return SZ_OK;
-+}
-+
-+SRes LzmaEnc_MemEncode(CLzmaEncHandle pp, Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
-+ int writeEndMark, ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+ SRes res;
-+ CLzmaEnc *p = (CLzmaEnc *)pp;
-+
-+ CSeqOutStreamBuf outStream;
-+
-+ LzmaEnc_SetInputBuf(p, src, srcLen);
-+
-+ outStream.funcTable.Write = MyWrite;
-+ outStream.data = dest;
-+ outStream.rem = *destLen;
-+ outStream.overflow = False;
-+
-+ p->writeEndMark = writeEndMark;
-+
-+ p->rc.outStream = &outStream.funcTable;
-+ res = LzmaEnc_MemPrepare(pp, src, srcLen, 0, alloc, allocBig);
-+ if (res == SZ_OK)
-+ res = LzmaEnc_Encode2(p, progress);
-+
-+ *destLen -= outStream.rem;
-+ if (outStream.overflow)
-+ return SZ_ERROR_OUTPUT_EOF;
-+ return res;
-+}
-+
-+SRes LzmaEncode(Byte *dest, SizeT *destLen, const Byte *src, SizeT srcLen,
-+ const CLzmaEncProps *props, Byte *propsEncoded, SizeT *propsSize, int writeEndMark,
-+ ICompressProgress *progress, ISzAlloc *alloc, ISzAlloc *allocBig)
-+{
-+ CLzmaEnc *p = (CLzmaEnc *)LzmaEnc_Create(alloc);
-+ SRes res;
-+ if (p == 0)
-+ return SZ_ERROR_MEM;
-+
-+ res = LzmaEnc_SetProps(p, props);
-+ if (res == SZ_OK)
-+ {
-+ res = LzmaEnc_WriteProperties(p, propsEncoded, propsSize);
-+ if (res == SZ_OK)
-+ res = LzmaEnc_MemEncode(p, dest, destLen, src, srcLen,
-+ writeEndMark, progress, alloc, allocBig);
-+ }
-+
-+ LzmaEnc_Destroy(p, alloc, allocBig);
-+ return res;
-+}
---- /dev/null
-+++ b/lib/lzma/Makefile
-@@ -0,0 +1,7 @@
-+lzma_compress-objs := LzFind.o LzmaEnc.o
-+lzma_decompress-objs := LzmaDec.o
-+
-+obj-$(CONFIG_LZMA_COMPRESS) += lzma_compress.o
-+obj-$(CONFIG_LZMA_DECOMPRESS) += lzma_decompress.o
-+
-+EXTRA_CFLAGS += -Iinclude/linux -Iinclude/linux/lzma -include types.h
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Subject: fs: jffs2: EOF marker
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- fs/jffs2/build.c | 10 ++++++++++
- fs/jffs2/scan.c | 21 +++++++++++++++++++--
- 2 files changed, 29 insertions(+), 2 deletions(-)
-
---- a/fs/jffs2/build.c
-+++ b/fs/jffs2/build.c
-@@ -117,6 +117,16 @@ static int jffs2_build_filesystem(struct
- dbg_fsbuild("scanned flash completely\n");
- jffs2_dbg_dump_block_lists_nolock(c);
-
-+ if (c->flags & (1 << 7)) {
-+ printk("%s(): unlocking the mtd device... ", __func__);
-+ mtd_unlock(c->mtd, 0, c->mtd->size);
-+ printk("done.\n");
-+
-+ printk("%s(): erasing all blocks after the end marker... ", __func__);
-+ jffs2_erase_pending_blocks(c, -1);
-+ printk("done.\n");
-+ }
-+
- dbg_fsbuild("pass 1 starting\n");
- c->flags |= JFFS2_SB_FLAG_BUILDING;
- /* Now scan the directory tree, increasing nlink according to every dirent found. */
---- a/fs/jffs2/scan.c
-+++ b/fs/jffs2/scan.c
-@@ -148,8 +148,14 @@ int jffs2_scan_medium(struct jffs2_sb_in
- /* reset summary info for next eraseblock scan */
- jffs2_sum_reset_collected(s);
-
-- ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset),
-- buf_size, s);
-+ if (c->flags & (1 << 7)) {
-+ if (mtd_block_isbad(c->mtd, jeb->offset))
-+ ret = BLK_STATE_BADBLOCK;
-+ else
-+ ret = BLK_STATE_ALLFF;
-+ } else
-+ ret = jffs2_scan_eraseblock(c, jeb, buf_size?flashbuf:(flashbuf+jeb->offset),
-+ buf_size, s);
-
- if (ret < 0)
- goto out;
-@@ -561,6 +567,17 @@ full_scan:
- return err;
- }
-
-+ if ((buf[0] == 0xde) &&
-+ (buf[1] == 0xad) &&
-+ (buf[2] == 0xc0) &&
-+ (buf[3] == 0xde)) {
-+ /* end of filesystem. erase everything after this point */
-+ printk("%s(): End of filesystem marker found at 0x%x\n", __func__, jeb->offset);
-+ c->flags |= (1 << 7);
-+
-+ return BLK_STATE_ALLFF;
-+ }
-+
- /* We temporarily use 'ofs' as a pointer into the buffer/jeb */
- ofs = 0;
- max_ofs = EMPTY_SCAN_SIZE(c->sector_size);
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Subject: netfilter: add support for flushing conntrack via /proc
-
-lede-commit 8193bbe59a74d34d6a26d4a8cb857b1952905314
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/netfilter/nf_conntrack_standalone.c | 59 ++++++++++++++++++++++++++++++++-
- 1 file changed, 58 insertions(+), 1 deletion(-)
-
---- a/net/netfilter/nf_conntrack_standalone.c
-+++ b/net/netfilter/nf_conntrack_standalone.c
-@@ -9,6 +9,7 @@
- #include <linux/percpu.h>
- #include <linux/netdevice.h>
- #include <linux/security.h>
-+#include <linux/inet.h>
- #include <net/net_namespace.h>
- #ifdef CONFIG_SYSCTL
- #include <linux/sysctl.h>
-@@ -433,6 +434,56 @@ static int ct_cpu_seq_show(struct seq_fi
- return 0;
- }
-
-+struct kill_request {
-+ u16 family;
-+ union nf_inet_addr addr;
-+};
-+
-+static int kill_matching(struct nf_conn *i, void *data)
-+{
-+ struct kill_request *kr = data;
-+ struct nf_conntrack_tuple *t1 = &i->tuplehash[IP_CT_DIR_ORIGINAL].tuple;
-+ struct nf_conntrack_tuple *t2 = &i->tuplehash[IP_CT_DIR_REPLY].tuple;
-+
-+ if (!kr->family)
-+ return 1;
-+
-+ if (t1->src.l3num != kr->family)
-+ return 0;
-+
-+ return (nf_inet_addr_cmp(&kr->addr, &t1->src.u3) ||
-+ nf_inet_addr_cmp(&kr->addr, &t1->dst.u3) ||
-+ nf_inet_addr_cmp(&kr->addr, &t2->src.u3) ||
-+ nf_inet_addr_cmp(&kr->addr, &t2->dst.u3));
-+}
-+
-+static int ct_file_write(struct file *file, char *buf, size_t count)
-+{
-+ struct seq_file *seq = file->private_data;
-+ struct net *net = seq_file_net(seq);
-+ struct kill_request kr = { };
-+
-+ if (count == 0)
-+ return 0;
-+
-+ if (count >= INET6_ADDRSTRLEN)
-+ count = INET6_ADDRSTRLEN - 1;
-+
-+ if (strnchr(buf, count, ':')) {
-+ kr.family = AF_INET6;
-+ if (!in6_pton(buf, count, (void *)&kr.addr, '\n', NULL))
-+ return -EINVAL;
-+ } else if (strnchr(buf, count, '.')) {
-+ kr.family = AF_INET;
-+ if (!in4_pton(buf, count, (void *)&kr.addr, '\n', NULL))
-+ return -EINVAL;
-+ }
-+
-+ nf_ct_iterate_cleanup_net(net, kill_matching, &kr, 0, 0);
-+
-+ return 0;
-+}
-+
- static const struct seq_operations ct_cpu_seq_ops = {
- .start = ct_cpu_seq_start,
- .next = ct_cpu_seq_next,
-@@ -446,8 +497,9 @@ static int nf_conntrack_standalone_init_
- kuid_t root_uid;
- kgid_t root_gid;
-
-- pde = proc_create_net("nf_conntrack", 0440, net->proc_net, &ct_seq_ops,
-- sizeof(struct ct_iter_state));
-+ pde = proc_create_net_data_write("nf_conntrack", 0440, net->proc_net,
-+ &ct_seq_ops, &ct_file_write,
-+ sizeof(struct ct_iter_state), NULL);
- if (!pde)
- goto out_nf_conntrack;
-
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: add a new version of my netfilter speedup patches for linux 2.6.39 and 3.0
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/uapi/linux/netfilter_ipv4/ip_tables.h | 1 +
- net/ipv4/netfilter/ip_tables.c | 37 +++++++++++++++++++++++++++
- 2 files changed, 38 insertions(+)
-
---- a/include/uapi/linux/netfilter_ipv4/ip_tables.h
-+++ b/include/uapi/linux/netfilter_ipv4/ip_tables.h
-@@ -89,6 +89,7 @@ struct ipt_ip {
- #define IPT_F_FRAG 0x01 /* Set if rule is a fragment rule */
- #define IPT_F_GOTO 0x02 /* Set if jump is a goto */
- #define IPT_F_MASK 0x03 /* All possible flag bits mask. */
-+#define IPT_F_NO_DEF_MATCH 0x80 /* Internal: no default match rules present */
-
- /* Values for "inv" field in struct ipt_ip. */
- #define IPT_INV_VIA_IN 0x01 /* Invert the sense of IN IFACE. */
---- a/net/ipv4/netfilter/ip_tables.c
-+++ b/net/ipv4/netfilter/ip_tables.c
-@@ -53,6 +53,9 @@ ip_packet_match(const struct iphdr *ip,
- {
- unsigned long ret;
-
-+ if (ipinfo->flags & IPT_F_NO_DEF_MATCH)
-+ return true;
-+
- if (NF_INVF(ipinfo, IPT_INV_SRCIP,
- (ip->saddr & ipinfo->smsk.s_addr) != ipinfo->src.s_addr) ||
- NF_INVF(ipinfo, IPT_INV_DSTIP,
-@@ -83,6 +86,29 @@ ip_packet_match(const struct iphdr *ip,
- return true;
- }
-
-+static void
-+ip_checkdefault(struct ipt_ip *ip)
-+{
-+ static const char iface_mask[IFNAMSIZ] = {};
-+
-+ if (ip->invflags || ip->flags & IPT_F_FRAG)
-+ return;
-+
-+ if (memcmp(ip->iniface_mask, iface_mask, IFNAMSIZ) != 0)
-+ return;
-+
-+ if (memcmp(ip->outiface_mask, iface_mask, IFNAMSIZ) != 0)
-+ return;
-+
-+ if (ip->smsk.s_addr || ip->dmsk.s_addr)
-+ return;
-+
-+ if (ip->proto)
-+ return;
-+
-+ ip->flags |= IPT_F_NO_DEF_MATCH;
-+}
-+
- static bool
- ip_checkentry(const struct ipt_ip *ip)
- {
-@@ -527,6 +553,8 @@ find_check_entry(struct ipt_entry *e, st
- struct xt_mtchk_param mtpar;
- struct xt_entry_match *ematch;
-
-+ ip_checkdefault(&e->ip);
-+
- if (!xt_percpu_counter_alloc(alloc_state, &e->counters))
- return -ENOMEM;
-
-@@ -821,6 +849,7 @@ copy_entries_to_user(unsigned int total_
- const struct xt_table_info *private = table->private;
- int ret = 0;
- const void *loc_cpu_entry;
-+ u8 flags;
-
- counters = alloc_counters(table);
- if (IS_ERR(counters))
-@@ -848,6 +877,14 @@ copy_entries_to_user(unsigned int total_
- goto free_counters;
- }
-
-+ flags = e->ip.flags & IPT_F_MASK;
-+ if (copy_to_user(userptr + off
-+ + offsetof(struct ipt_entry, ip.flags),
-+ &flags, sizeof(flags)) != 0) {
-+ ret = -EFAULT;
-+ goto free_counters;
-+ }
-+
- for (i = sizeof(struct ipt_entry);
- i < e->target_offset;
- i += m->u.match_size) {
-@@ -1228,12 +1265,15 @@ compat_copy_entry_to_user(struct ipt_ent
- compat_uint_t origsize;
- const struct xt_entry_match *ematch;
- int ret = 0;
-+ u8 flags = e->ip.flags & IPT_F_MASK;
-
- origsize = *size;
- ce = *dstptr;
- if (copy_to_user(ce, e, sizeof(struct ipt_entry)) != 0 ||
- copy_to_user(&ce->counters, &counters[i],
-- sizeof(counters[i])) != 0)
-+ sizeof(counters[i])) != 0 ||
-+ copy_to_user(&ce->ip.flags, &flags,
-+ sizeof(flags)) != 0)
- return -EFAULT;
-
- *dstptr += sizeof(struct compat_ipt_entry);
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Subject: netfilter: match bypass default table
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/ipv4/netfilter/ip_tables.c | 79 +++++++++++++++++++++++++++++++-----------
- 1 file changed, 58 insertions(+), 21 deletions(-)
-
---- a/net/ipv4/netfilter/ip_tables.c
-+++ b/net/ipv4/netfilter/ip_tables.c
-@@ -249,6 +249,33 @@ struct ipt_entry *ipt_next_entry(const s
- return (void *)entry + entry->next_offset;
- }
-
-+static bool
-+ipt_handle_default_rule(struct ipt_entry *e, unsigned int *verdict)
-+{
-+ struct xt_entry_target *t;
-+ struct xt_standard_target *st;
-+
-+ if (e->target_offset != sizeof(struct ipt_entry))
-+ return false;
-+
-+ if (!(e->ip.flags & IPT_F_NO_DEF_MATCH))
-+ return false;
-+
-+ t = ipt_get_target(e);
-+ if (t->u.kernel.target->target)
-+ return false;
-+
-+ st = (struct xt_standard_target *) t;
-+ if (st->verdict == XT_RETURN)
-+ return false;
-+
-+ if (st->verdict >= 0)
-+ return false;
-+
-+ *verdict = (unsigned)(-st->verdict) - 1;
-+ return true;
-+}
-+
- /* Returns one of the generic firewall policies, like NF_ACCEPT. */
- unsigned int
- ipt_do_table(struct sk_buff *skb,
-@@ -269,27 +296,28 @@ ipt_do_table(struct sk_buff *skb,
- unsigned int addend;
-
- /* Initialization */
-+ WARN_ON(!(table->valid_hooks & (1 << hook)));
-+ local_bh_disable();
-+ private = READ_ONCE(table->private); /* Address dependency. */
-+ cpu = smp_processor_id();
-+ table_base = private->entries;
-+
-+ e = get_entry(table_base, private->hook_entry[hook]);
-+ if (ipt_handle_default_rule(e, &verdict)) {
-+ struct xt_counters *counter;
-+
-+ counter = xt_get_this_cpu_counter(&e->counters);
-+ ADD_COUNTER(*counter, skb->len, 1);
-+ local_bh_enable();
-+ return verdict;
-+ }
-+
- stackidx = 0;
- ip = ip_hdr(skb);
- indev = state->in ? state->in->name : nulldevname;
- outdev = state->out ? state->out->name : nulldevname;
-- /* We handle fragments by dealing with the first fragment as
-- * if it was a normal packet. All other fragments are treated
-- * normally, except that they will NEVER match rules that ask
-- * things we don't know, ie. tcp syn flag or ports). If the
-- * rule is also a fragment-specific rule, non-fragments won't
-- * match it. */
-- acpar.fragoff = ntohs(ip->frag_off) & IP_OFFSET;
-- acpar.thoff = ip_hdrlen(skb);
-- acpar.hotdrop = false;
-- acpar.state = state;
-
-- WARN_ON(!(table->valid_hooks & (1 << hook)));
-- local_bh_disable();
- addend = xt_write_recseq_begin();
-- private = READ_ONCE(table->private); /* Address dependency. */
-- cpu = smp_processor_id();
-- table_base = private->entries;
- jumpstack = (struct ipt_entry **)private->jumpstack[cpu];
-
- /* Switch to alternate jumpstack if we're being invoked via TEE.
-@@ -302,7 +330,16 @@ ipt_do_table(struct sk_buff *skb,
- if (static_key_false(&xt_tee_enabled))
- jumpstack += private->stacksize * __this_cpu_read(nf_skb_duplicated);
-
-- e = get_entry(table_base, private->hook_entry[hook]);
-+ /* We handle fragments by dealing with the first fragment as
-+ * if it was a normal packet. All other fragments are treated
-+ * normally, except that they will NEVER match rules that ask
-+ * things we don't know, ie. tcp syn flag or ports). If the
-+ * rule is also a fragment-specific rule, non-fragments won't
-+ * match it. */
-+ acpar.fragoff = ntohs(ip->frag_off) & IP_OFFSET;
-+ acpar.thoff = ip_hdrlen(skb);
-+ acpar.hotdrop = false;
-+ acpar.state = state;
-
- do {
- const struct xt_entry_target *t;
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Subject: netfilter: reduce match memory access
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/ipv4/netfilter/ip_tables.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/net/ipv4/netfilter/ip_tables.c
-+++ b/net/ipv4/netfilter/ip_tables.c
-@@ -56,9 +56,9 @@ ip_packet_match(const struct iphdr *ip,
- if (ipinfo->flags & IPT_F_NO_DEF_MATCH)
- return true;
-
-- if (NF_INVF(ipinfo, IPT_INV_SRCIP,
-+ if (NF_INVF(ipinfo, IPT_INV_SRCIP, ipinfo->smsk.s_addr &&
- (ip->saddr & ipinfo->smsk.s_addr) != ipinfo->src.s_addr) ||
-- NF_INVF(ipinfo, IPT_INV_DSTIP,
-+ NF_INVF(ipinfo, IPT_INV_DSTIP, ipinfo->dmsk.s_addr &&
- (ip->daddr & ipinfo->dmsk.s_addr) != ipinfo->dst.s_addr))
- return false;
-
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Subject: netfilter: optional tcp window check
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- net/netfilter/nf_conntrack_proto_tcp.c | 13 +++++++++++++
- 1 file changed, 13 insertions(+)
-
---- a/net/netfilter/nf_conntrack_proto_tcp.c
-+++ b/net/netfilter/nf_conntrack_proto_tcp.c
-@@ -34,6 +34,9 @@
- #include <net/netfilter/ipv4/nf_conntrack_ipv4.h>
- #include <net/netfilter/ipv6/nf_conntrack_ipv6.h>
-
-+/* Do not check the TCP window for incoming packets */
-+static int nf_ct_tcp_no_window_check __read_mostly = 1;
-+
- /* "Be conservative in what you do,
- be liberal in what you accept from others."
- If it's non-zero, we mark only out of window RST segments as INVALID. */
-@@ -484,6 +487,9 @@ static bool tcp_in_window(const struct n
- s32 receiver_offset;
- bool res, in_recv_win;
-
-+ if (nf_ct_tcp_no_window_check)
-+ return true;
-+
- /*
- * Get the required data from the packet.
- */
-@@ -1059,7 +1065,7 @@ static int tcp_packet(struct nf_conn *ct
- IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED &&
- timeouts[new_state] > timeouts[TCP_CONNTRACK_UNACK])
- timeout = timeouts[TCP_CONNTRACK_UNACK];
-- else if (ct->proto.tcp.last_win == 0 &&
-+ else if (!nf_ct_tcp_no_window_check && ct->proto.tcp.last_win == 0 &&
- timeouts[new_state] > timeouts[TCP_CONNTRACK_RETRANS])
- timeout = timeouts[TCP_CONNTRACK_RETRANS];
- else
-@@ -1508,6 +1514,13 @@ static struct ctl_table tcp_sysctl_table
- .mode = 0644,
- .proc_handler = proc_dointvec,
- },
-+ {
-+ .procname = "nf_conntrack_tcp_no_window_check",
-+ .data = &nf_ct_tcp_no_window_check,
-+ .maxlen = sizeof(unsigned int),
-+ .mode = 0644,
-+ .proc_handler = proc_dointvec,
-+ },
- { }
- };
- #endif /* CONFIG_SYSCTL */
+++ /dev/null
-From: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
-Date: Mon, 21 Aug 2017 11:14:14 +0300
-Subject: [PATCH] net_sched/codel: do not defer queue length update
-
-When codel wants to drop last packet in ->dequeue() it cannot call
-qdisc_tree_reduce_backlog() right away - it will notify parent qdisc
-about zero qlen and HTB/HFSC will deactivate class. The same class will
-be deactivated second time by caller of ->dequeue(). Currently codel and
-fq_codel defer update. This triggers warning in HFSC when it's qlen != 0
-but there is no active classes.
-
-This patch update parent queue length immediately: just temporary increase
-qlen around qdisc_tree_reduce_backlog() to prevent first class deactivation
-if we have skb to return.
-
-This might open another problem in HFSC - now operation peek could fail and
-deactivate parent class.
-
-Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
-Link: https://bugzilla.kernel.org/show_bug.cgi?id=109581
----
-
---- a/net/sched/sch_codel.c
-+++ b/net/sched/sch_codel.c
-@@ -95,11 +95,17 @@ static struct sk_buff *codel_qdisc_deque
- &q->stats, qdisc_pkt_len, codel_get_enqueue_time,
- drop_func, dequeue_func);
-
-- /* We cant call qdisc_tree_reduce_backlog() if our qlen is 0,
-- * or HTB crashes. Defer it for next round.
-+ /* If our qlen is 0 qdisc_tree_reduce_backlog() will deactivate
-+ * parent class, dequeue in parent qdisc will do the same if we
-+ * return skb. Temporary increment qlen if we have skb.
- */
-- if (q->stats.drop_count && sch->q.qlen) {
-- qdisc_tree_reduce_backlog(sch, q->stats.drop_count, q->stats.drop_len);
-+ if (q->stats.drop_count) {
-+ if (skb)
-+ sch->q.qlen++;
-+ qdisc_tree_reduce_backlog(sch, q->stats.drop_count,
-+ q->stats.drop_len);
-+ if (skb)
-+ sch->q.qlen--;
- q->stats.drop_count = 0;
- q->stats.drop_len = 0;
- }
---- a/net/sched/sch_fq_codel.c
-+++ b/net/sched/sch_fq_codel.c
-@@ -317,6 +317,21 @@ begin:
- flow->dropped += q->cstats.drop_count - prev_drop_count;
- flow->dropped += q->cstats.ecn_mark - prev_ecn_mark;
-
-+ /* If our qlen is 0 qdisc_tree_reduce_backlog() will deactivate
-+ * parent class, dequeue in parent qdisc will do the same if we
-+ * return skb. Temporary increment qlen if we have skb.
-+ */
-+ if (q->cstats.drop_count) {
-+ if (skb)
-+ sch->q.qlen++;
-+ qdisc_tree_reduce_backlog(sch, q->cstats.drop_count,
-+ q->cstats.drop_len);
-+ if (skb)
-+ sch->q.qlen--;
-+ q->cstats.drop_count = 0;
-+ q->cstats.drop_len = 0;
-+ }
-+
- if (!skb) {
- /* force a pass through old_flows to prevent starvation */
- if ((head == &q->new_flows) && !list_empty(&q->old_flows))
-@@ -327,15 +342,6 @@ begin:
- }
- qdisc_bstats_update(sch, skb);
- flow->deficit -= qdisc_pkt_len(skb);
-- /* We cant call qdisc_tree_reduce_backlog() if our qlen is 0,
-- * or HTB crashes. Defer it for next round.
-- */
-- if (q->cstats.drop_count && sch->q.qlen) {
-- qdisc_tree_reduce_backlog(sch, q->cstats.drop_count,
-- q->cstats.drop_len);
-- q->cstats.drop_count = 0;
-- q->cstats.drop_len = 0;
-- }
- return skb;
- }
-
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Subject: net: add an optimization for dealing with raw sockets
-
-lede-commit: 4898039703d7315f0f3431c860123338ec3be0f6
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/uapi/linux/if_packet.h | 3 +++
- net/packet/af_packet.c | 34 +++++++++++++++++++++++++++-------
- net/packet/internal.h | 1 +
- 3 files changed, 31 insertions(+), 7 deletions(-)
-
---- a/include/uapi/linux/if_packet.h
-+++ b/include/uapi/linux/if_packet.h
-@@ -32,6 +32,8 @@ struct sockaddr_ll {
- #define PACKET_KERNEL 7 /* To kernel space */
- /* Unused, PACKET_FASTROUTE and PACKET_LOOPBACK are invisible to user space */
- #define PACKET_FASTROUTE 6 /* Fastrouted frame */
-+#define PACKET_MASK_ANY 0xffffffff /* mask for packet type bits */
-+
-
- /* Packet socket options */
-
-@@ -57,6 +59,7 @@ struct sockaddr_ll {
- #define PACKET_QDISC_BYPASS 20
- #define PACKET_ROLLOVER_STATS 21
- #define PACKET_FANOUT_DATA 22
-+#define PACKET_RECV_TYPE 23
-
- #define PACKET_FANOUT_HASH 0
- #define PACKET_FANOUT_LB 1
---- a/net/packet/af_packet.c
-+++ b/net/packet/af_packet.c
-@@ -1796,6 +1796,7 @@ static int packet_rcv_spkt(struct sk_buf
- {
- struct sock *sk;
- struct sockaddr_pkt *spkt;
-+ struct packet_sock *po;
-
- /*
- * When we registered the protocol we saved the socket in the data
-@@ -1803,6 +1804,7 @@ static int packet_rcv_spkt(struct sk_buf
- */
-
- sk = pt->af_packet_priv;
-+ po = pkt_sk(sk);
-
- /*
- * Yank back the headers [hope the device set this
-@@ -1815,7 +1817,7 @@ static int packet_rcv_spkt(struct sk_buf
- * so that this procedure is noop.
- */
-
-- if (skb->pkt_type == PACKET_LOOPBACK)
-+ if (!(po->pkt_type & (1 << skb->pkt_type)))
- goto out;
-
- if (!net_eq(dev_net(dev), sock_net(sk)))
-@@ -2043,12 +2045,12 @@ static int packet_rcv(struct sk_buff *sk
- unsigned int snaplen, res;
- bool is_drop_n_account = false;
-
-- if (skb->pkt_type == PACKET_LOOPBACK)
-- goto drop;
--
- sk = pt->af_packet_priv;
- po = pkt_sk(sk);
-
-+ if (!(po->pkt_type & (1 << skb->pkt_type)))
-+ goto drop;
-+
- if (!net_eq(dev_net(dev), sock_net(sk)))
- goto drop;
-
-@@ -2175,12 +2177,12 @@ static int tpacket_rcv(struct sk_buff *s
- BUILD_BUG_ON(TPACKET_ALIGN(sizeof(*h.h2)) != 32);
- BUILD_BUG_ON(TPACKET_ALIGN(sizeof(*h.h3)) != 48);
-
-- if (skb->pkt_type == PACKET_LOOPBACK)
-- goto drop;
--
- sk = pt->af_packet_priv;
- po = pkt_sk(sk);
-
-+ if (!(po->pkt_type & (1 << skb->pkt_type)))
-+ goto drop;
-+
- if (!net_eq(dev_net(dev), sock_net(sk)))
- goto drop;
-
-@@ -3277,6 +3279,7 @@ static int packet_create(struct net *net
- mutex_init(&po->pg_vec_lock);
- po->rollover = NULL;
- po->prot_hook.func = packet_rcv;
-+ po->pkt_type = PACKET_MASK_ANY & ~(1 << PACKET_LOOPBACK);
-
- if (sock->type == SOCK_PACKET)
- po->prot_hook.func = packet_rcv_spkt;
-@@ -3897,6 +3900,16 @@ packet_setsockopt(struct socket *sock, i
- po->xmit = val ? packet_direct_xmit : dev_queue_xmit;
- return 0;
- }
-+ case PACKET_RECV_TYPE:
-+ {
-+ unsigned int val;
-+ if (optlen != sizeof(val))
-+ return -EINVAL;
-+ if (copy_from_user(&val, optval, sizeof(val)))
-+ return -EFAULT;
-+ po->pkt_type = val & ~BIT(PACKET_LOOPBACK);
-+ return 0;
-+ }
- default:
- return -ENOPROTOOPT;
- }
-@@ -3949,6 +3962,13 @@ static int packet_getsockopt(struct sock
- case PACKET_VNET_HDR:
- val = po->has_vnet_hdr;
- break;
-+ case PACKET_RECV_TYPE:
-+ if (len > sizeof(unsigned int))
-+ len = sizeof(unsigned int);
-+ val = po->pkt_type;
-+
-+ data = &val;
-+ break;
- case PACKET_VERSION:
- val = po->tp_version;
- break;
---- a/net/packet/internal.h
-+++ b/net/packet/internal.h
-@@ -135,6 +135,7 @@ struct packet_sock {
- struct net_device __rcu *cached_dev;
- int (*xmit)(struct sk_buff *skb);
- struct packet_type prot_hook ____cacheline_aligned_in_smp;
-+ unsigned int pkt_type;
- };
-
- static struct packet_sock *pkt_sk(struct sock *sk)
+++ /dev/null
-From: Pablo Neira Ayuso <pablo@netfilter.org>
-Date: Thu, 11 Jan 2018 16:32:00 +0100
-Subject: [PATCH] netfilter: nf_flow_table: add hardware offload support
-
-This patch adds the infrastructure to offload flows to hardware, in case
-the nic/switch comes with built-in flow tables capabilities.
-
-If the hardware comes with no hardware flow tables or they have
-limitations in terms of features, the existing infrastructure falls back
-to the software flow table implementation.
-
-The software flow table garbage collector skips entries that resides in
-the hardware, so the hardware will be responsible for releasing this
-flow table entry too via flow_offload_dead().
-
-Hardware configuration, either to add or to delete entries, is done from
-the hardware offload workqueue, to ensure this is done from user context
-given that we may sleep when grabbing the mdio mutex.
-
-Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
----
- create mode 100644 net/netfilter/nf_flow_table_hw.c
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -918,6 +918,13 @@ struct dev_ifalias {
- char ifalias[];
- };
-
-+struct flow_offload;
-+
-+enum flow_offload_type {
-+ FLOW_OFFLOAD_ADD = 0,
-+ FLOW_OFFLOAD_DEL,
-+};
-+
- /*
- * This structure defines the management hooks for network devices.
- * The following hooks can be defined; unless noted otherwise, they are
-@@ -1150,6 +1157,10 @@ struct dev_ifalias {
- * int (*ndo_bridge_dellink)(struct net_device *dev, struct nlmsghdr *nlh,
- * u16 flags);
- *
-+ * int (*ndo_flow_offload)(enum flow_offload_type type,
-+ * struct flow_offload *flow);
-+ * Adds/deletes flow entry to/from net device flowtable.
-+ *
- * int (*ndo_change_carrier)(struct net_device *dev, bool new_carrier);
- * Called to change device carrier. Soft-devices (like dummy, team, etc)
- * which do not represent real hardware may define this to allow their
-@@ -1377,6 +1388,8 @@ struct net_device_ops {
- int (*ndo_bridge_dellink)(struct net_device *dev,
- struct nlmsghdr *nlh,
- u16 flags);
-+ int (*ndo_flow_offload)(enum flow_offload_type type,
-+ struct flow_offload *flow);
- int (*ndo_change_carrier)(struct net_device *dev,
- bool new_carrier);
- int (*ndo_get_phys_port_id)(struct net_device *dev,
---- a/include/net/netfilter/nf_flow_table.h
-+++ b/include/net/netfilter/nf_flow_table.h
-@@ -20,11 +20,17 @@ struct nf_flowtable_type {
- struct module *owner;
- };
-
-+enum nf_flowtable_flags {
-+ NF_FLOWTABLE_F_HW = 0x1,
-+};
-+
- struct nf_flowtable {
- struct list_head list;
- struct rhashtable rhashtable;
- const struct nf_flowtable_type *type;
-+ u32 flags;
- struct delayed_work gc_work;
-+ possible_net_t ft_net;
- };
-
- enum flow_offload_tuple_dir {
-@@ -69,6 +75,7 @@ struct flow_offload_tuple_rhash {
- #define FLOW_OFFLOAD_DNAT 0x2
- #define FLOW_OFFLOAD_DYING 0x4
- #define FLOW_OFFLOAD_TEARDOWN 0x8
-+#define FLOW_OFFLOAD_HW 0x10
-
- struct flow_offload {
- struct flow_offload_tuple_rhash tuplehash[FLOW_OFFLOAD_DIR_MAX];
-@@ -125,6 +132,22 @@ unsigned int nf_flow_offload_ip_hook(voi
- unsigned int nf_flow_offload_ipv6_hook(void *priv, struct sk_buff *skb,
- const struct nf_hook_state *state);
-
-+void nf_flow_offload_hw_add(struct net *net, struct flow_offload *flow,
-+ struct nf_conn *ct);
-+void nf_flow_offload_hw_del(struct net *net, struct flow_offload *flow);
-+
-+struct nf_flow_table_hw {
-+ struct module *owner;
-+ void (*add)(struct net *net, struct flow_offload *flow,
-+ struct nf_conn *ct);
-+ void (*del)(struct net *net, struct flow_offload *flow);
-+};
-+
-+int nf_flow_table_hw_register(const struct nf_flow_table_hw *offload);
-+void nf_flow_table_hw_unregister(const struct nf_flow_table_hw *offload);
-+
-+extern struct work_struct nf_flow_offload_hw_work;
-+
- #define MODULE_ALIAS_NF_FLOWTABLE(family) \
- MODULE_ALIAS("nf-flowtable-" __stringify(family))
-
---- a/include/uapi/linux/netfilter/nf_tables.h
-+++ b/include/uapi/linux/netfilter/nf_tables.h
-@@ -1464,6 +1464,7 @@ enum nft_object_attributes {
- * @NFTA_FLOWTABLE_HOOK: netfilter hook configuration(NLA_U32)
- * @NFTA_FLOWTABLE_USE: number of references to this flow table (NLA_U32)
- * @NFTA_FLOWTABLE_HANDLE: object handle (NLA_U64)
-+ * @NFTA_FLOWTABLE_FLAGS: flags (NLA_U32)
- */
- enum nft_flowtable_attributes {
- NFTA_FLOWTABLE_UNSPEC,
-@@ -1473,6 +1474,7 @@ enum nft_flowtable_attributes {
- NFTA_FLOWTABLE_USE,
- NFTA_FLOWTABLE_HANDLE,
- NFTA_FLOWTABLE_PAD,
-+ NFTA_FLOWTABLE_FLAGS,
- __NFTA_FLOWTABLE_MAX
- };
- #define NFTA_FLOWTABLE_MAX (__NFTA_FLOWTABLE_MAX - 1)
---- a/net/netfilter/Kconfig
-+++ b/net/netfilter/Kconfig
-@@ -714,6 +714,15 @@ config NF_FLOW_TABLE
-
- To compile it as a module, choose M here.
-
-+config NF_FLOW_TABLE_HW
-+ tristate "Netfilter flow table hardware offload module"
-+ depends on NF_FLOW_TABLE
-+ help
-+ This option adds hardware offload support for the flow table core
-+ infrastructure.
-+
-+ To compile it as a module, choose M here.
-+
- config NETFILTER_XTABLES
- tristate "Netfilter Xtables support (required for ip_tables)"
- default m if NETFILTER_ADVANCED=n
---- a/net/netfilter/Makefile
-+++ b/net/netfilter/Makefile
-@@ -126,6 +126,7 @@ obj-$(CONFIG_NF_FLOW_TABLE) += nf_flow_t
- nf_flow_table-objs := nf_flow_table_core.o nf_flow_table_ip.o
-
- obj-$(CONFIG_NF_FLOW_TABLE_INET) += nf_flow_table_inet.o
-+obj-$(CONFIG_NF_FLOW_TABLE_HW) += nf_flow_table_hw.o
-
- # generic X tables
- obj-$(CONFIG_NETFILTER_XTABLES) += x_tables.o xt_tcpudp.o
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -228,10 +228,16 @@ int flow_offload_add(struct nf_flowtable
- }
- EXPORT_SYMBOL_GPL(flow_offload_add);
-
-+static inline bool nf_flow_in_hw(const struct flow_offload *flow)
-+{
-+ return flow->flags & FLOW_OFFLOAD_HW;
-+}
-+
- static void flow_offload_del(struct nf_flowtable *flow_table,
- struct flow_offload *flow)
- {
- struct flow_offload_entry *e;
-+ struct net *net = read_pnet(&flow_table->ft_net);
-
- rhashtable_remove_fast(&flow_table->rhashtable,
- &flow->tuplehash[FLOW_OFFLOAD_DIR_ORIGINAL].node,
-@@ -246,6 +252,9 @@ static void flow_offload_del(struct nf_f
- if (!(flow->flags & FLOW_OFFLOAD_TEARDOWN))
- flow_offload_fixup_ct_state(e->ct);
-
-+ if (nf_flow_in_hw(flow))
-+ nf_flow_offload_hw_del(net, flow);
-+
- flow_offload_free(flow);
- }
-
-@@ -359,6 +368,9 @@ static int nf_flow_offload_gc_step(struc
- if (!teardown)
- nf_ct_offload_timeout(flow);
-
-+ if (nf_flow_in_hw(flow) && !teardown)
-+ continue;
-+
- if (nf_flow_has_expired(flow) || teardown)
- flow_offload_del(flow_table, flow);
- }
-@@ -494,10 +506,43 @@ int nf_flow_dnat_port(const struct flow_
- }
- EXPORT_SYMBOL_GPL(nf_flow_dnat_port);
-
-+static const struct nf_flow_table_hw __rcu *nf_flow_table_hw_hook __read_mostly;
-+
-+static int nf_flow_offload_hw_init(struct nf_flowtable *flow_table)
-+{
-+ const struct nf_flow_table_hw *offload;
-+
-+ if (!rcu_access_pointer(nf_flow_table_hw_hook))
-+ request_module("nf-flow-table-hw");
-+
-+ rcu_read_lock();
-+ offload = rcu_dereference(nf_flow_table_hw_hook);
-+ if (!offload)
-+ goto err_no_hw_offload;
-+
-+ if (!try_module_get(offload->owner))
-+ goto err_no_hw_offload;
-+
-+ rcu_read_unlock();
-+
-+ return 0;
-+
-+err_no_hw_offload:
-+ rcu_read_unlock();
-+
-+ return -EOPNOTSUPP;
-+}
-+
- int nf_flow_table_init(struct nf_flowtable *flowtable)
- {
- int err;
-
-+ if (flowtable->flags & NF_FLOWTABLE_F_HW) {
-+ err = nf_flow_offload_hw_init(flowtable);
-+ if (err)
-+ return err;
-+ }
-+
- INIT_DEFERRABLE_WORK(&flowtable->gc_work, nf_flow_offload_work_gc);
-
- err = rhashtable_init(&flowtable->rhashtable,
-@@ -538,6 +583,8 @@ static void nf_flow_table_iterate_cleanu
- {
- nf_flow_table_iterate(flowtable, nf_flow_table_do_cleanup, dev);
- flush_delayed_work(&flowtable->gc_work);
-+ if (flowtable->flags & NF_FLOWTABLE_F_HW)
-+ flush_work(&nf_flow_offload_hw_work);
- }
-
- void nf_flow_table_cleanup(struct net *net, struct net_device *dev)
-@@ -551,6 +598,26 @@ void nf_flow_table_cleanup(struct net *n
- }
- EXPORT_SYMBOL_GPL(nf_flow_table_cleanup);
-
-+struct work_struct nf_flow_offload_hw_work;
-+EXPORT_SYMBOL_GPL(nf_flow_offload_hw_work);
-+
-+/* Give the hardware workqueue the chance to remove entries from hardware.*/
-+static void nf_flow_offload_hw_free(struct nf_flowtable *flowtable)
-+{
-+ const struct nf_flow_table_hw *offload;
-+
-+ flush_work(&nf_flow_offload_hw_work);
-+
-+ rcu_read_lock();
-+ offload = rcu_dereference(nf_flow_table_hw_hook);
-+ if (!offload) {
-+ rcu_read_unlock();
-+ return;
-+ }
-+ module_put(offload->owner);
-+ rcu_read_unlock();
-+}
-+
- void nf_flow_table_free(struct nf_flowtable *flow_table)
- {
- mutex_lock(&flowtable_lock);
-@@ -560,9 +627,58 @@ void nf_flow_table_free(struct nf_flowta
- nf_flow_table_iterate(flow_table, nf_flow_table_do_cleanup, NULL);
- WARN_ON(!nf_flow_offload_gc_step(flow_table));
- rhashtable_destroy(&flow_table->rhashtable);
-+ if (flow_table->flags & NF_FLOWTABLE_F_HW)
-+ nf_flow_offload_hw_free(flow_table);
- }
- EXPORT_SYMBOL_GPL(nf_flow_table_free);
-
-+/* Must be called from user context. */
-+void nf_flow_offload_hw_add(struct net *net, struct flow_offload *flow,
-+ struct nf_conn *ct)
-+{
-+ const struct nf_flow_table_hw *offload;
-+
-+ rcu_read_lock();
-+ offload = rcu_dereference(nf_flow_table_hw_hook);
-+ if (offload)
-+ offload->add(net, flow, ct);
-+ rcu_read_unlock();
-+}
-+EXPORT_SYMBOL_GPL(nf_flow_offload_hw_add);
-+
-+/* Must be called from user context. */
-+void nf_flow_offload_hw_del(struct net *net, struct flow_offload *flow)
-+{
-+ const struct nf_flow_table_hw *offload;
-+
-+ rcu_read_lock();
-+ offload = rcu_dereference(nf_flow_table_hw_hook);
-+ if (offload)
-+ offload->del(net, flow);
-+ rcu_read_unlock();
-+}
-+EXPORT_SYMBOL_GPL(nf_flow_offload_hw_del);
-+
-+int nf_flow_table_hw_register(const struct nf_flow_table_hw *offload)
-+{
-+ if (rcu_access_pointer(nf_flow_table_hw_hook))
-+ return -EBUSY;
-+
-+ rcu_assign_pointer(nf_flow_table_hw_hook, offload);
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL_GPL(nf_flow_table_hw_register);
-+
-+void nf_flow_table_hw_unregister(const struct nf_flow_table_hw *offload)
-+{
-+ WARN_ON(rcu_access_pointer(nf_flow_table_hw_hook) != offload);
-+ rcu_assign_pointer(nf_flow_table_hw_hook, NULL);
-+
-+ synchronize_rcu();
-+}
-+EXPORT_SYMBOL_GPL(nf_flow_table_hw_unregister);
-+
- static int nf_flow_table_netdev_event(struct notifier_block *this,
- unsigned long event, void *ptr)
- {
---- /dev/null
-+++ b/net/netfilter/nf_flow_table_hw.c
-@@ -0,0 +1,169 @@
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/netfilter.h>
-+#include <linux/rhashtable.h>
-+#include <linux/netdevice.h>
-+#include <net/netfilter/nf_flow_table.h>
-+#include <net/netfilter/nf_conntrack.h>
-+#include <net/netfilter/nf_conntrack_core.h>
-+#include <net/netfilter/nf_conntrack_tuple.h>
-+
-+static DEFINE_SPINLOCK(flow_offload_hw_pending_list_lock);
-+static LIST_HEAD(flow_offload_hw_pending_list);
-+
-+static DEFINE_MUTEX(nf_flow_offload_hw_mutex);
-+
-+struct flow_offload_hw {
-+ struct list_head list;
-+ enum flow_offload_type type;
-+ struct flow_offload *flow;
-+ struct nf_conn *ct;
-+ possible_net_t flow_hw_net;
-+};
-+
-+static int do_flow_offload_hw(struct net *net, struct flow_offload *flow,
-+ int type)
-+{
-+ struct net_device *indev;
-+ int ret, ifindex;
-+
-+ ifindex = flow->tuplehash[FLOW_OFFLOAD_DIR_ORIGINAL].tuple.iifidx;
-+ indev = dev_get_by_index(net, ifindex);
-+ if (WARN_ON(!indev))
-+ return 0;
-+
-+ mutex_lock(&nf_flow_offload_hw_mutex);
-+ ret = indev->netdev_ops->ndo_flow_offload(type, flow);
-+ mutex_unlock(&nf_flow_offload_hw_mutex);
-+
-+ dev_put(indev);
-+
-+ return ret;
-+}
-+
-+static void flow_offload_hw_work_add(struct flow_offload_hw *offload)
-+{
-+ struct net *net;
-+ int ret;
-+
-+ if (nf_ct_is_dying(offload->ct))
-+ return;
-+
-+ net = read_pnet(&offload->flow_hw_net);
-+ ret = do_flow_offload_hw(net, offload->flow, FLOW_OFFLOAD_ADD);
-+ if (ret >= 0)
-+ offload->flow->flags |= FLOW_OFFLOAD_HW;
-+}
-+
-+static void flow_offload_hw_work_del(struct flow_offload_hw *offload)
-+{
-+ struct net *net = read_pnet(&offload->flow_hw_net);
-+
-+ do_flow_offload_hw(net, offload->flow, FLOW_OFFLOAD_DEL);
-+}
-+
-+static void flow_offload_hw_work(struct work_struct *work)
-+{
-+ struct flow_offload_hw *offload, *next;
-+ LIST_HEAD(hw_offload_pending);
-+
-+ spin_lock_bh(&flow_offload_hw_pending_list_lock);
-+ list_replace_init(&flow_offload_hw_pending_list, &hw_offload_pending);
-+ spin_unlock_bh(&flow_offload_hw_pending_list_lock);
-+
-+ list_for_each_entry_safe(offload, next, &hw_offload_pending, list) {
-+ switch (offload->type) {
-+ case FLOW_OFFLOAD_ADD:
-+ flow_offload_hw_work_add(offload);
-+ break;
-+ case FLOW_OFFLOAD_DEL:
-+ flow_offload_hw_work_del(offload);
-+ break;
-+ }
-+ if (offload->ct)
-+ nf_conntrack_put(&offload->ct->ct_general);
-+ list_del(&offload->list);
-+ kfree(offload);
-+ }
-+}
-+
-+static void flow_offload_queue_work(struct flow_offload_hw *offload)
-+{
-+ spin_lock_bh(&flow_offload_hw_pending_list_lock);
-+ list_add_tail(&offload->list, &flow_offload_hw_pending_list);
-+ spin_unlock_bh(&flow_offload_hw_pending_list_lock);
-+
-+ schedule_work(&nf_flow_offload_hw_work);
-+}
-+
-+static void flow_offload_hw_add(struct net *net, struct flow_offload *flow,
-+ struct nf_conn *ct)
-+{
-+ struct flow_offload_hw *offload;
-+
-+ offload = kmalloc(sizeof(struct flow_offload_hw), GFP_ATOMIC);
-+ if (!offload)
-+ return;
-+
-+ nf_conntrack_get(&ct->ct_general);
-+ offload->type = FLOW_OFFLOAD_ADD;
-+ offload->ct = ct;
-+ offload->flow = flow;
-+ write_pnet(&offload->flow_hw_net, net);
-+
-+ flow_offload_queue_work(offload);
-+}
-+
-+static void flow_offload_hw_del(struct net *net, struct flow_offload *flow)
-+{
-+ struct flow_offload_hw *offload;
-+
-+ offload = kmalloc(sizeof(struct flow_offload_hw), GFP_ATOMIC);
-+ if (!offload)
-+ return;
-+
-+ offload->type = FLOW_OFFLOAD_DEL;
-+ offload->ct = NULL;
-+ offload->flow = flow;
-+ write_pnet(&offload->flow_hw_net, net);
-+
-+ flow_offload_queue_work(offload);
-+}
-+
-+static const struct nf_flow_table_hw flow_offload_hw = {
-+ .add = flow_offload_hw_add,
-+ .del = flow_offload_hw_del,
-+ .owner = THIS_MODULE,
-+};
-+
-+static int __init nf_flow_table_hw_module_init(void)
-+{
-+ INIT_WORK(&nf_flow_offload_hw_work, flow_offload_hw_work);
-+ nf_flow_table_hw_register(&flow_offload_hw);
-+
-+ return 0;
-+}
-+
-+static void __exit nf_flow_table_hw_module_exit(void)
-+{
-+ struct flow_offload_hw *offload, *next;
-+ LIST_HEAD(hw_offload_pending);
-+
-+ nf_flow_table_hw_unregister(&flow_offload_hw);
-+ cancel_work_sync(&nf_flow_offload_hw_work);
-+
-+ list_for_each_entry_safe(offload, next, &hw_offload_pending, list) {
-+ if (offload->ct)
-+ nf_conntrack_put(&offload->ct->ct_general);
-+ list_del(&offload->list);
-+ kfree(offload);
-+ }
-+}
-+
-+module_init(nf_flow_table_hw_module_init);
-+module_exit(nf_flow_table_hw_module_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Pablo Neira Ayuso <pablo@netfilter.org>");
-+MODULE_ALIAS("nf-flow-table-hw");
---- a/net/netfilter/nf_tables_api.c
-+++ b/net/netfilter/nf_tables_api.c
-@@ -5503,6 +5503,13 @@ static int nf_tables_flowtable_parse_hoo
- if (err < 0)
- return err;
-
-+ for (i = 0; i < n; i++) {
-+ if (flowtable->data.flags & NF_FLOWTABLE_F_HW &&
-+ !dev_array[i]->netdev_ops->ndo_flow_offload) {
-+ return -EOPNOTSUPP;
-+ }
-+ }
-+
- ops = kcalloc(n, sizeof(struct nf_hook_ops), GFP_KERNEL);
- if (!ops)
- return -ENOMEM;
-@@ -5634,10 +5641,19 @@ static int nf_tables_newflowtable(struct
- }
-
- flowtable->data.type = type;
-+ write_pnet(&flowtable->data.ft_net, net);
-+
- err = type->init(&flowtable->data);
- if (err < 0)
- goto err3;
-
-+ if (nla[NFTA_FLOWTABLE_FLAGS]) {
-+ flowtable->data.flags =
-+ ntohl(nla_get_be32(nla[NFTA_FLOWTABLE_FLAGS]));
-+ if (flowtable->data.flags & ~NF_FLOWTABLE_F_HW)
-+ goto err4;
-+ }
-+
- err = nf_tables_flowtable_parse_hook(&ctx, nla[NFTA_FLOWTABLE_HOOK],
- flowtable);
- if (err < 0)
-@@ -5763,7 +5779,8 @@ static int nf_tables_fill_flowtable_info
- nla_put_string(skb, NFTA_FLOWTABLE_NAME, flowtable->name) ||
- nla_put_be32(skb, NFTA_FLOWTABLE_USE, htonl(flowtable->use)) ||
- nla_put_be64(skb, NFTA_FLOWTABLE_HANDLE, cpu_to_be64(flowtable->handle),
-- NFTA_FLOWTABLE_PAD))
-+ NFTA_FLOWTABLE_PAD) ||
-+ nla_put_be32(skb, NFTA_FLOWTABLE_FLAGS, htonl(flowtable->data.flags)))
- goto nla_put_failure;
-
- nest = nla_nest_start(skb, NFTA_FLOWTABLE_HOOK);
---- a/net/netfilter/nft_flow_offload.c
-+++ b/net/netfilter/nft_flow_offload.c
-@@ -126,6 +126,9 @@ static void nft_flow_offload_eval(const
- if (ret < 0)
- goto err_flow_add;
-
-+ if (flowtable->flags & NF_FLOWTABLE_F_HW)
-+ nf_flow_offload_hw_add(nft_net(pkt), flow, ct);
-+
- dst_release(route.tuple[!dir].dst);
- return;
-
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 15 Mar 2018 20:46:31 +0100
-Subject: [PATCH] netfilter: nf_flow_table: support hw offload through
- virtual interfaces
-
-There are hardware offload devices that support offloading VLANs and
-PPPoE devices. Additionally, it is useful to be able to offload packets
-routed through bridge interfaces as well.
-Add support for finding the path to the offload device through these
-virtual interfaces, while collecting useful parameters for the offload
-device, like VLAN ID/protocol, PPPoE session and Ethernet MAC address.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -919,6 +919,7 @@ struct dev_ifalias {
- };
-
- struct flow_offload;
-+struct flow_offload_hw_path;
-
- enum flow_offload_type {
- FLOW_OFFLOAD_ADD = 0,
-@@ -1157,8 +1158,15 @@ enum flow_offload_type {
- * int (*ndo_bridge_dellink)(struct net_device *dev, struct nlmsghdr *nlh,
- * u16 flags);
- *
-+ * int (*ndo_flow_offload_check)(struct flow_offload_hw_path *path);
-+ * For virtual devices like bridges, vlan, and pppoe, fill in the
-+ * underlying network device that can be used for offloading connections.
-+ * Return an error if offloading is not supported.
-+ *
- * int (*ndo_flow_offload)(enum flow_offload_type type,
-- * struct flow_offload *flow);
-+ * struct flow_offload *flow,
-+ * struct flow_offload_hw_path *src,
-+ * struct flow_offload_hw_path *dest);
- * Adds/deletes flow entry to/from net device flowtable.
- *
- * int (*ndo_change_carrier)(struct net_device *dev, bool new_carrier);
-@@ -1388,8 +1396,11 @@ struct net_device_ops {
- int (*ndo_bridge_dellink)(struct net_device *dev,
- struct nlmsghdr *nlh,
- u16 flags);
-+ int (*ndo_flow_offload_check)(struct flow_offload_hw_path *path);
- int (*ndo_flow_offload)(enum flow_offload_type type,
-- struct flow_offload *flow);
-+ struct flow_offload *flow,
-+ struct flow_offload_hw_path *src,
-+ struct flow_offload_hw_path *dest);
- int (*ndo_change_carrier)(struct net_device *dev,
- bool new_carrier);
- int (*ndo_get_phys_port_id)(struct net_device *dev,
---- a/include/net/netfilter/nf_flow_table.h
-+++ b/include/net/netfilter/nf_flow_table.h
-@@ -86,6 +86,21 @@ struct flow_offload {
- };
- };
-
-+#define FLOW_OFFLOAD_PATH_ETHERNET BIT(0)
-+#define FLOW_OFFLOAD_PATH_VLAN BIT(1)
-+#define FLOW_OFFLOAD_PATH_PPPOE BIT(2)
-+
-+struct flow_offload_hw_path {
-+ struct net_device *dev;
-+ u32 flags;
-+
-+ u8 eth_src[ETH_ALEN];
-+ u8 eth_dest[ETH_ALEN];
-+ u16 vlan_proto;
-+ u16 vlan_id;
-+ u16 pppoe_sid;
-+};
-+
- #define NF_FLOW_TIMEOUT (30 * HZ)
-
- struct nf_flow_route {
---- a/net/netfilter/nf_flow_table_hw.c
-+++ b/net/netfilter/nf_flow_table_hw.c
-@@ -19,48 +19,77 @@ struct flow_offload_hw {
- enum flow_offload_type type;
- struct flow_offload *flow;
- struct nf_conn *ct;
-- possible_net_t flow_hw_net;
-+
-+ struct flow_offload_hw_path src;
-+ struct flow_offload_hw_path dest;
- };
-
--static int do_flow_offload_hw(struct net *net, struct flow_offload *flow,
-- int type)
-+static void flow_offload_check_ethernet(struct flow_offload_tuple *tuple,
-+ struct dst_entry *dst,
-+ struct flow_offload_hw_path *path)
- {
-- struct net_device *indev;
-- int ret, ifindex;
-+ struct net_device *dev = path->dev;
-+ struct neighbour *n;
-
-- ifindex = flow->tuplehash[FLOW_OFFLOAD_DIR_ORIGINAL].tuple.iifidx;
-- indev = dev_get_by_index(net, ifindex);
-- if (WARN_ON(!indev))
-- return 0;
--
-- mutex_lock(&nf_flow_offload_hw_mutex);
-- ret = indev->netdev_ops->ndo_flow_offload(type, flow);
-- mutex_unlock(&nf_flow_offload_hw_mutex);
-+ if (dev->type != ARPHRD_ETHER)
-+ return;
-
-- dev_put(indev);
-+ memcpy(path->eth_src, path->dev->dev_addr, ETH_ALEN);
-+ n = dst_neigh_lookup(dst, &tuple->src_v4);
-+ if (!n)
-+ return;
-
-- return ret;
-+ memcpy(path->eth_dest, n->ha, ETH_ALEN);
-+ path->flags |= FLOW_OFFLOAD_PATH_ETHERNET;
-+ neigh_release(n);
- }
-
--static void flow_offload_hw_work_add(struct flow_offload_hw *offload)
-+static int flow_offload_check_path(struct net *net,
-+ struct flow_offload_tuple *tuple,
-+ struct dst_entry *dst,
-+ struct flow_offload_hw_path *path)
- {
-- struct net *net;
-- int ret;
-+ struct net_device *dev;
-
-- if (nf_ct_is_dying(offload->ct))
-- return;
-+ dev = dev_get_by_index_rcu(net, tuple->iifidx);
-+ if (!dev)
-+ return -ENOENT;
-+
-+ path->dev = dev;
-+ flow_offload_check_ethernet(tuple, dst, path);
-
-- net = read_pnet(&offload->flow_hw_net);
-- ret = do_flow_offload_hw(net, offload->flow, FLOW_OFFLOAD_ADD);
-- if (ret >= 0)
-- offload->flow->flags |= FLOW_OFFLOAD_HW;
-+ if (dev->netdev_ops->ndo_flow_offload_check)
-+ return dev->netdev_ops->ndo_flow_offload_check(path);
-+
-+ return 0;
- }
-
--static void flow_offload_hw_work_del(struct flow_offload_hw *offload)
-+static int do_flow_offload_hw(struct flow_offload_hw *offload)
- {
-- struct net *net = read_pnet(&offload->flow_hw_net);
-+ struct net_device *src_dev = offload->src.dev;
-+ struct net_device *dest_dev = offload->dest.dev;
-+ int ret;
-+
-+ ret = src_dev->netdev_ops->ndo_flow_offload(offload->type,
-+ offload->flow,
-+ &offload->src,
-+ &offload->dest);
-+
-+ /* restore devices in case the driver mangled them */
-+ offload->src.dev = src_dev;
-+ offload->dest.dev = dest_dev;
-
-- do_flow_offload_hw(net, offload->flow, FLOW_OFFLOAD_DEL);
-+ return ret;
-+}
-+
-+static void flow_offload_hw_free(struct flow_offload_hw *offload)
-+{
-+ dev_put(offload->src.dev);
-+ dev_put(offload->dest.dev);
-+ if (offload->ct)
-+ nf_conntrack_put(&offload->ct->ct_general);
-+ list_del(&offload->list);
-+ kfree(offload);
- }
-
- static void flow_offload_hw_work(struct work_struct *work)
-@@ -73,18 +102,22 @@ static void flow_offload_hw_work(struct
- spin_unlock_bh(&flow_offload_hw_pending_list_lock);
-
- list_for_each_entry_safe(offload, next, &hw_offload_pending, list) {
-+ mutex_lock(&nf_flow_offload_hw_mutex);
- switch (offload->type) {
- case FLOW_OFFLOAD_ADD:
-- flow_offload_hw_work_add(offload);
-+ if (nf_ct_is_dying(offload->ct))
-+ break;
-+
-+ if (do_flow_offload_hw(offload) >= 0)
-+ offload->flow->flags |= FLOW_OFFLOAD_HW;
- break;
- case FLOW_OFFLOAD_DEL:
-- flow_offload_hw_work_del(offload);
-+ do_flow_offload_hw(offload);
- break;
- }
-- if (offload->ct)
-- nf_conntrack_put(&offload->ct->ct_general);
-- list_del(&offload->list);
-- kfree(offload);
-+ mutex_unlock(&nf_flow_offload_hw_mutex);
-+
-+ flow_offload_hw_free(offload);
- }
- }
-
-@@ -97,20 +130,56 @@ static void flow_offload_queue_work(stru
- schedule_work(&nf_flow_offload_hw_work);
- }
-
-+static struct flow_offload_hw *
-+flow_offload_hw_prepare(struct net *net, struct flow_offload *flow)
-+{
-+ struct flow_offload_hw_path src = {};
-+ struct flow_offload_hw_path dest = {};
-+ struct flow_offload_tuple *tuple_s, *tuple_d;
-+ struct flow_offload_hw *offload = NULL;
-+
-+ rcu_read_lock_bh();
-+
-+ tuple_s = &flow->tuplehash[FLOW_OFFLOAD_DIR_ORIGINAL].tuple;
-+ tuple_d = &flow->tuplehash[FLOW_OFFLOAD_DIR_REPLY].tuple;
-+
-+ if (flow_offload_check_path(net, tuple_s, tuple_d->dst_cache, &src))
-+ goto out;
-+
-+ if (flow_offload_check_path(net, tuple_d, tuple_s->dst_cache, &dest))
-+ goto out;
-+
-+ if (!src.dev->netdev_ops->ndo_flow_offload)
-+ goto out;
-+
-+ offload = kzalloc(sizeof(struct flow_offload_hw), GFP_ATOMIC);
-+ if (!offload)
-+ goto out;
-+
-+ dev_hold(src.dev);
-+ dev_hold(dest.dev);
-+ offload->src = src;
-+ offload->dest = dest;
-+ offload->flow = flow;
-+
-+out:
-+ rcu_read_unlock_bh();
-+
-+ return offload;
-+}
-+
- static void flow_offload_hw_add(struct net *net, struct flow_offload *flow,
- struct nf_conn *ct)
- {
- struct flow_offload_hw *offload;
-
-- offload = kmalloc(sizeof(struct flow_offload_hw), GFP_ATOMIC);
-+ offload = flow_offload_hw_prepare(net, flow);
- if (!offload)
- return;
-
- nf_conntrack_get(&ct->ct_general);
- offload->type = FLOW_OFFLOAD_ADD;
- offload->ct = ct;
-- offload->flow = flow;
-- write_pnet(&offload->flow_hw_net, net);
-
- flow_offload_queue_work(offload);
- }
-@@ -119,14 +188,11 @@ static void flow_offload_hw_del(struct n
- {
- struct flow_offload_hw *offload;
-
-- offload = kmalloc(sizeof(struct flow_offload_hw), GFP_ATOMIC);
-+ offload = flow_offload_hw_prepare(net, flow);
- if (!offload)
- return;
-
- offload->type = FLOW_OFFLOAD_DEL;
-- offload->ct = NULL;
-- offload->flow = flow;
-- write_pnet(&offload->flow_hw_net, net);
-
- flow_offload_queue_work(offload);
- }
-@@ -153,12 +219,8 @@ static void __exit nf_flow_table_hw_modu
- nf_flow_table_hw_unregister(&flow_offload_hw);
- cancel_work_sync(&nf_flow_offload_hw_work);
-
-- list_for_each_entry_safe(offload, next, &hw_offload_pending, list) {
-- if (offload->ct)
-- nf_conntrack_put(&offload->ct->ct_general);
-- list_del(&offload->list);
-- kfree(offload);
-- }
-+ list_for_each_entry_safe(offload, next, &hw_offload_pending, list)
-+ flow_offload_hw_free(offload);
- }
-
- module_init(nf_flow_table_hw_module_init);
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 15 Mar 2018 20:49:58 +0100
-Subject: [PATCH] net: 8021q: support hardware flow table offload
-
-Add the VLAN ID and protocol information
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/8021q/vlan_dev.c
-+++ b/net/8021q/vlan_dev.c
-@@ -32,6 +32,10 @@
- #include <linux/phy.h>
- #include <net/arp.h>
- #include <net/switchdev.h>
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+#include <linux/netfilter.h>
-+#include <net/netfilter/nf_flow_table.h>
-+#endif
-
- #include "vlan.h"
- #include "vlanproc.h"
-@@ -771,6 +775,27 @@ static int vlan_dev_get_iflink(const str
- return real_dev->ifindex;
- }
-
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+static int vlan_dev_flow_offload_check(struct flow_offload_hw_path *path)
-+{
-+ struct net_device *dev = path->dev;
-+ struct vlan_dev_priv *vlan = vlan_dev_priv(dev);
-+
-+ if (path->flags & FLOW_OFFLOAD_PATH_VLAN)
-+ return -EEXIST;
-+
-+ path->flags |= FLOW_OFFLOAD_PATH_VLAN;
-+ path->vlan_proto = vlan->vlan_proto;
-+ path->vlan_id = vlan->vlan_id;
-+ path->dev = vlan->real_dev;
-+
-+ if (vlan->real_dev->netdev_ops->ndo_flow_offload_check)
-+ return vlan->real_dev->netdev_ops->ndo_flow_offload_check(path);
-+
-+ return 0;
-+}
-+#endif /* CONFIG_NF_FLOW_TABLE */
-+
- static const struct ethtool_ops vlan_ethtool_ops = {
- .get_link_ksettings = vlan_ethtool_get_link_ksettings,
- .get_drvinfo = vlan_ethtool_get_drvinfo,
-@@ -808,6 +833,9 @@ static const struct net_device_ops vlan_
- .ndo_fix_features = vlan_dev_fix_features,
- .ndo_get_lock_subclass = vlan_dev_get_lock_subclass,
- .ndo_get_iflink = vlan_dev_get_iflink,
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+ .ndo_flow_offload_check = vlan_dev_flow_offload_check,
-+#endif
- };
-
- static void vlan_dev_free(struct net_device *dev)
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 15 Mar 2018 20:50:37 +0100
-Subject: [PATCH] net: bridge: support hardware flow table offload
-
-Look up the real device and pass it on
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/net/bridge/br_device.c
-+++ b/net/bridge/br_device.c
-@@ -18,6 +18,10 @@
- #include <linux/ethtool.h>
- #include <linux/list.h>
- #include <linux/netfilter_bridge.h>
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+#include <linux/netfilter.h>
-+#include <net/netfilter/nf_flow_table.h>
-+#endif
-
- #include <linux/uaccess.h>
- #include "br_private.h"
-@@ -376,6 +380,28 @@ static const struct ethtool_ops br_ethto
- .get_link = ethtool_op_get_link,
- };
-
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+static int br_flow_offload_check(struct flow_offload_hw_path *path)
-+{
-+ struct net_device *dev = path->dev;
-+ struct net_bridge *br = netdev_priv(dev);
-+ struct net_bridge_fdb_entry *dst;
-+
-+ if (!(path->flags & FLOW_OFFLOAD_PATH_ETHERNET))
-+ return -EINVAL;
-+
-+ dst = br_fdb_find_rcu(br, path->eth_dest, path->vlan_id);
-+ if (!dst || !dst->dst)
-+ return -ENOENT;
-+
-+ path->dev = dst->dst->dev;
-+ if (path->dev->netdev_ops->ndo_flow_offload_check)
-+ return path->dev->netdev_ops->ndo_flow_offload_check(path);
-+
-+ return 0;
-+}
-+#endif /* CONFIG_NF_FLOW_TABLE */
-+
- static const struct net_device_ops br_netdev_ops = {
- .ndo_open = br_dev_open,
- .ndo_stop = br_dev_stop,
-@@ -403,6 +429,9 @@ static const struct net_device_ops br_ne
- .ndo_bridge_setlink = br_setlink,
- .ndo_bridge_dellink = br_dellink,
- .ndo_features_check = passthru_features_check,
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+ .ndo_flow_offload_check = br_flow_offload_check,
-+#endif
- };
-
- static struct device_type br_type = {
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Thu, 15 Mar 2018 21:15:00 +0100
-Subject: [PATCH] net: pppoe: support hardware flow table offload
-
-Pass on the PPPoE session ID and the remote MAC address
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/drivers/net/ppp/ppp_generic.c
-+++ b/drivers/net/ppp/ppp_generic.c
-@@ -57,6 +57,11 @@
- #include <net/net_namespace.h>
- #include <net/netns/generic.h>
-
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+#include <linux/netfilter.h>
-+#include <net/netfilter/nf_flow_table.h>
-+#endif
-+
- #define PPP_VERSION "2.4.2"
-
- /*
-@@ -1368,12 +1373,37 @@ static void ppp_dev_priv_destructor(stru
- ppp_destroy_interface(ppp);
- }
-
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+static int ppp_flow_offload_check(struct flow_offload_hw_path *path)
-+{
-+ struct ppp *ppp = netdev_priv(path->dev);
-+ struct ppp_channel *chan;
-+ struct channel *pch;
-+
-+ if (ppp->flags & SC_MULTILINK)
-+ return -EOPNOTSUPP;
-+
-+ if (list_empty(&ppp->channels))
-+ return -ENODEV;
-+
-+ pch = list_first_entry(&ppp->channels, struct channel, clist);
-+ chan = pch->chan;
-+ if (!chan->ops->flow_offload_check)
-+ return -EOPNOTSUPP;
-+
-+ return chan->ops->flow_offload_check(chan, path);
-+}
-+#endif /* CONFIG_NF_FLOW_TABLE */
-+
- static const struct net_device_ops ppp_netdev_ops = {
- .ndo_init = ppp_dev_init,
- .ndo_uninit = ppp_dev_uninit,
- .ndo_start_xmit = ppp_start_xmit,
- .ndo_do_ioctl = ppp_net_ioctl,
- .ndo_get_stats64 = ppp_get_stats64,
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+ .ndo_flow_offload_check = ppp_flow_offload_check,
-+#endif
- };
-
- static struct device_type ppp_type = {
---- a/drivers/net/ppp/pppoe.c
-+++ b/drivers/net/ppp/pppoe.c
-@@ -78,6 +78,11 @@
- #include <linux/proc_fs.h>
- #include <linux/seq_file.h>
-
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+#include <linux/netfilter.h>
-+#include <net/netfilter/nf_flow_table.h>
-+#endif
-+
- #include <linux/nsproxy.h>
- #include <net/net_namespace.h>
- #include <net/netns/generic.h>
-@@ -979,8 +984,36 @@ static int pppoe_xmit(struct ppp_channel
- return __pppoe_xmit(sk, skb);
- }
-
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+static int pppoe_flow_offload_check(struct ppp_channel *chan,
-+ struct flow_offload_hw_path *path)
-+{
-+ struct sock *sk = (struct sock *)chan->private;
-+ struct pppox_sock *po = pppox_sk(sk);
-+ struct net_device *dev = po->pppoe_dev;
-+
-+ if (sock_flag(sk, SOCK_DEAD) ||
-+ !(sk->sk_state & PPPOX_CONNECTED) || !dev)
-+ return -ENODEV;
-+
-+ path->dev = po->pppoe_dev;
-+ path->flags |= FLOW_OFFLOAD_PATH_PPPOE;
-+ memcpy(path->eth_src, po->pppoe_dev->dev_addr, ETH_ALEN);
-+ memcpy(path->eth_dest, po->pppoe_pa.remote, ETH_ALEN);
-+ path->pppoe_sid = be16_to_cpu(po->num);
-+
-+ if (path->dev->netdev_ops->ndo_flow_offload_check)
-+ return path->dev->netdev_ops->ndo_flow_offload_check(path);
-+
-+ return 0;
-+}
-+#endif /* CONFIG_NF_FLOW_TABLE */
-+
- static const struct ppp_channel_ops pppoe_chan_ops = {
- .start_xmit = pppoe_xmit,
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+ .flow_offload_check = pppoe_flow_offload_check,
-+#endif
- };
-
- static int pppoe_recvmsg(struct socket *sock, struct msghdr *m,
---- a/include/linux/ppp_channel.h
-+++ b/include/linux/ppp_channel.h
-@@ -32,6 +32,10 @@ struct ppp_channel_ops {
- int (*start_xmit)(struct ppp_channel *, struct sk_buff *);
- /* Handle an ioctl call that has come in via /dev/ppp. */
- int (*ioctl)(struct ppp_channel *, unsigned int, unsigned long);
-+
-+#if IS_ENABLED(CONFIG_NF_FLOW_TABLE)
-+ int (*flow_offload_check)(struct ppp_channel *, struct flow_offload_hw_path *);
-+#endif
- };
-
- struct ppp_channel {
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sun, 25 Mar 2018 21:10:55 +0200
-Subject: [PATCH] netfilter: nf_flow_table: rework hardware offload timeout
- handling
-
-Some offload implementations send keepalive packets + explicit
-notifications of TCP FIN/RST packets. In this case it is more convenient
-to simply let the driver update flow->timeout handling and use the
-regular flow offload gc step.
-
-For drivers that manage their own lifetime, a separate flag can be set
-to avoid gc timeouts.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/include/net/netfilter/nf_flow_table.h
-+++ b/include/net/netfilter/nf_flow_table.h
-@@ -76,6 +76,7 @@ struct flow_offload_tuple_rhash {
- #define FLOW_OFFLOAD_DYING 0x4
- #define FLOW_OFFLOAD_TEARDOWN 0x8
- #define FLOW_OFFLOAD_HW 0x10
-+#define FLOW_OFFLOAD_KEEP 0x20
-
- struct flow_offload {
- struct flow_offload_tuple_rhash tuplehash[FLOW_OFFLOAD_DIR_MAX];
---- a/net/netfilter/nf_flow_table_core.c
-+++ b/net/netfilter/nf_flow_table_core.c
-@@ -368,7 +368,7 @@ static int nf_flow_offload_gc_step(struc
- if (!teardown)
- nf_ct_offload_timeout(flow);
-
-- if (nf_flow_in_hw(flow) && !teardown)
-+ if ((flow->flags & FLOW_OFFLOAD_KEEP) && !teardown)
- continue;
-
- if (nf_flow_has_expired(flow) || teardown)
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Fri, 27 Apr 2018 14:42:14 +0200
-Subject: [PATCH] netfilter: nf_flow_table: rework private driver data
-
-Move the timeout out of the union, since it can be shared between the
-driver and the stack. Add a private pointer that the driver can use to
-point to its own data structures
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/include/net/netfilter/nf_flow_table.h
-+++ b/include/net/netfilter/nf_flow_table.h
-@@ -81,9 +81,10 @@ struct flow_offload_tuple_rhash {
- struct flow_offload {
- struct flow_offload_tuple_rhash tuplehash[FLOW_OFFLOAD_DIR_MAX];
- u32 flags;
-+ u32 timeout;
- union {
- /* Your private driver data here. */
-- u32 timeout;
-+ void *priv;
- };
- };
-
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Subject: kernel: add a few patches for avoiding unnecessary skb reallocations - significantly improves ethernet<->wireless performance
-
-lede-commit: 6f89cffc9add6939d44a6b54cf9a5e77849aa7fd
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/skbuff.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/include/linux/skbuff.h
-+++ b/include/linux/skbuff.h
-@@ -2511,7 +2511,7 @@ static inline int pskb_network_may_pull(
- * NET_IP_ALIGN(2) + ethernet_header(14) + IP_header(20/40) + ports(8)
- */
- #ifndef NET_SKB_PAD
--#define NET_SKB_PAD max(32, L1_CACHE_BYTES)
-+#define NET_SKB_PAD max(64, L1_CACHE_BYTES)
- #endif
-
- int ___pskb_trim(struct sk_buff *skb, unsigned int len);
+++ /dev/null
-From: Steven Barth <steven@midlink.org>
-Subject: Add support for MAP-E FMRs (mesh mode)
-
-MAP-E FMRs (draft-ietf-softwire-map-10) are rules for IPv4-communication
-between MAP CEs (mesh mode) without the need to forward such data to a
-border relay. This is similar to how 6rd works but for IPv4 over IPv6.
-
-Signed-off-by: Steven Barth <cyrus@openwrt.org>
----
- include/net/ip6_tunnel.h | 13 ++
- include/uapi/linux/if_tunnel.h | 13 ++
- net/ipv6/ip6_tunnel.c | 276 +++++++++++++++++++++++++++++++++++++++--
- 3 files changed, 291 insertions(+), 11 deletions(-)
-
---- a/include/net/ip6_tunnel.h
-+++ b/include/net/ip6_tunnel.h
-@@ -18,6 +18,18 @@
- /* determine capability on a per-packet basis */
- #define IP6_TNL_F_CAP_PER_PACKET 0x40000
-
-+/* IPv6 tunnel FMR */
-+struct __ip6_tnl_fmr {
-+ struct __ip6_tnl_fmr *next; /* next fmr in list */
-+ struct in6_addr ip6_prefix;
-+ struct in_addr ip4_prefix;
-+
-+ __u8 ip6_prefix_len;
-+ __u8 ip4_prefix_len;
-+ __u8 ea_len;
-+ __u8 offset;
-+};
-+
- struct __ip6_tnl_parm {
- char name[IFNAMSIZ]; /* name of tunnel device */
- int link; /* ifindex of underlying L2 interface */
-@@ -29,6 +41,7 @@ struct __ip6_tnl_parm {
- __u32 flags; /* tunnel flags */
- struct in6_addr laddr; /* local tunnel end-point address */
- struct in6_addr raddr; /* remote tunnel end-point address */
-+ struct __ip6_tnl_fmr *fmrs; /* FMRs */
-
- __be16 i_flags;
- __be16 o_flags;
---- a/include/uapi/linux/if_tunnel.h
-+++ b/include/uapi/linux/if_tunnel.h
-@@ -77,10 +77,23 @@ enum {
- IFLA_IPTUN_ENCAP_DPORT,
- IFLA_IPTUN_COLLECT_METADATA,
- IFLA_IPTUN_FWMARK,
-+ IFLA_IPTUN_FMRS,
- __IFLA_IPTUN_MAX,
- };
- #define IFLA_IPTUN_MAX (__IFLA_IPTUN_MAX - 1)
-
-+enum {
-+ IFLA_IPTUN_FMR_UNSPEC,
-+ IFLA_IPTUN_FMR_IP6_PREFIX,
-+ IFLA_IPTUN_FMR_IP4_PREFIX,
-+ IFLA_IPTUN_FMR_IP6_PREFIX_LEN,
-+ IFLA_IPTUN_FMR_IP4_PREFIX_LEN,
-+ IFLA_IPTUN_FMR_EA_LEN,
-+ IFLA_IPTUN_FMR_OFFSET,
-+ __IFLA_IPTUN_FMR_MAX,
-+};
-+#define IFLA_IPTUN_FMR_MAX (__IFLA_IPTUN_FMR_MAX - 1)
-+
- enum tunnel_encap_types {
- TUNNEL_ENCAP_NONE,
- TUNNEL_ENCAP_FOU,
---- a/net/ipv6/ip6_tunnel.c
-+++ b/net/ipv6/ip6_tunnel.c
-@@ -16,6 +16,8 @@
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
-+ * Changes:
-+ * Steven Barth <cyrus@openwrt.org>: MAP-E FMR support
- */
-
- #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-@@ -72,9 +74,9 @@ static bool log_ecn_error = true;
- module_param(log_ecn_error, bool, 0644);
- MODULE_PARM_DESC(log_ecn_error, "Log packets received with corrupted ECN");
-
--static u32 HASH(const struct in6_addr *addr1, const struct in6_addr *addr2)
-+static u32 HASH(const struct in6_addr *addr)
- {
-- u32 hash = ipv6_addr_hash(addr1) ^ ipv6_addr_hash(addr2);
-+ u32 hash = ipv6_addr_hash(addr);
-
- return hash_32(hash, IP6_TUNNEL_HASH_SIZE_SHIFT);
- }
-@@ -141,20 +143,29 @@ static struct net_device_stats *ip6_get_
- static struct ip6_tnl *
- ip6_tnl_lookup(struct net *net, const struct in6_addr *remote, const struct in6_addr *local)
- {
-- unsigned int hash = HASH(remote, local);
-+ unsigned int hash = HASH(local);
- struct ip6_tnl *t;
- struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id);
- struct in6_addr any;
-+ struct __ip6_tnl_fmr *fmr;
-
- for_each_ip6_tunnel_rcu(ip6n->tnls_r_l[hash]) {
-- if (ipv6_addr_equal(local, &t->parms.laddr) &&
-- ipv6_addr_equal(remote, &t->parms.raddr) &&
-- (t->dev->flags & IFF_UP))
-+ if (!ipv6_addr_equal(local, &t->parms.laddr) ||
-+ !(t->dev->flags & IFF_UP))
-+ continue;
-+
-+ if (ipv6_addr_equal(remote, &t->parms.raddr))
- return t;
-+
-+ for (fmr = t->parms.fmrs; fmr; fmr = fmr->next) {
-+ if (ipv6_prefix_equal(remote, &fmr->ip6_prefix,
-+ fmr->ip6_prefix_len))
-+ return t;
-+ }
- }
-
- memset(&any, 0, sizeof(any));
-- hash = HASH(&any, local);
-+ hash = HASH(local);
- for_each_ip6_tunnel_rcu(ip6n->tnls_r_l[hash]) {
- if (ipv6_addr_equal(local, &t->parms.laddr) &&
- ipv6_addr_any(&t->parms.raddr) &&
-@@ -162,7 +173,7 @@ ip6_tnl_lookup(struct net *net, const st
- return t;
- }
-
-- hash = HASH(remote, &any);
-+ hash = HASH(&any);
- for_each_ip6_tunnel_rcu(ip6n->tnls_r_l[hash]) {
- if (ipv6_addr_equal(remote, &t->parms.raddr) &&
- ipv6_addr_any(&t->parms.laddr) &&
-@@ -202,7 +213,7 @@ ip6_tnl_bucket(struct ip6_tnl_net *ip6n,
-
- if (!ipv6_addr_any(remote) || !ipv6_addr_any(local)) {
- prio = 1;
-- h = HASH(remote, local);
-+ h = HASH(local);
- }
- return &ip6n->tnls[prio][h];
- }
-@@ -383,6 +394,12 @@ ip6_tnl_dev_uninit(struct net_device *de
- struct net *net = t->net;
- struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id);
-
-+ while (t->parms.fmrs) {
-+ struct __ip6_tnl_fmr *next = t->parms.fmrs->next;
-+ kfree(t->parms.fmrs);
-+ t->parms.fmrs = next;
-+ }
-+
- if (dev == ip6n->fb_tnl_dev)
- RCU_INIT_POINTER(ip6n->tnls_wc[0], NULL);
- else
-@@ -772,6 +789,107 @@ int ip6_tnl_rcv_ctl(struct ip6_tnl *t,
- }
- EXPORT_SYMBOL_GPL(ip6_tnl_rcv_ctl);
-
-+/**
-+ * ip4ip6_fmr_calc - calculate target / source IPv6-address based on FMR
-+ * @dest: destination IPv6 address buffer
-+ * @skb: received socket buffer
-+ * @fmr: MAP FMR
-+ * @xmit: Calculate for xmit or rcv
-+ **/
-+static void ip4ip6_fmr_calc(struct in6_addr *dest,
-+ const struct iphdr *iph, const uint8_t *end,
-+ const struct __ip6_tnl_fmr *fmr, bool xmit)
-+{
-+ int psidlen = fmr->ea_len - (32 - fmr->ip4_prefix_len);
-+ u8 *portp = NULL;
-+ bool use_dest_addr;
-+ const struct iphdr *dsth = iph;
-+
-+ if ((u8*)dsth >= end)
-+ return;
-+
-+ /* find significant IP header */
-+ if (iph->protocol == IPPROTO_ICMP) {
-+ struct icmphdr *ih = (struct icmphdr*)(((u8*)dsth) + dsth->ihl * 4);
-+ if (ih && ((u8*)&ih[1]) <= end && (
-+ ih->type == ICMP_DEST_UNREACH ||
-+ ih->type == ICMP_SOURCE_QUENCH ||
-+ ih->type == ICMP_TIME_EXCEEDED ||
-+ ih->type == ICMP_PARAMETERPROB ||
-+ ih->type == ICMP_REDIRECT))
-+ dsth = (const struct iphdr*)&ih[1];
-+ }
-+
-+ /* in xmit-path use dest port by default and source port only if
-+ this is an ICMP reply to something else; vice versa in rcv-path */
-+ use_dest_addr = (xmit && dsth == iph) || (!xmit && dsth != iph);
-+
-+ /* get dst port */
-+ if (((u8*)&dsth[1]) <= end && (
-+ dsth->protocol == IPPROTO_UDP ||
-+ dsth->protocol == IPPROTO_TCP ||
-+ dsth->protocol == IPPROTO_SCTP ||
-+ dsth->protocol == IPPROTO_DCCP)) {
-+ /* for UDP, TCP, SCTP and DCCP source and dest port
-+ follow IPv4 header directly */
-+ portp = ((u8*)dsth) + dsth->ihl * 4;
-+
-+ if (use_dest_addr)
-+ portp += sizeof(u16);
-+ } else if (iph->protocol == IPPROTO_ICMP) {
-+ struct icmphdr *ih = (struct icmphdr*)(((u8*)dsth) + dsth->ihl * 4);
-+
-+ /* use icmp identifier as port */
-+ if (((u8*)&ih) <= end && (
-+ (use_dest_addr && (
-+ ih->type == ICMP_ECHOREPLY ||
-+ ih->type == ICMP_TIMESTAMPREPLY ||
-+ ih->type == ICMP_INFO_REPLY ||
-+ ih->type == ICMP_ADDRESSREPLY)) ||
-+ (!use_dest_addr && (
-+ ih->type == ICMP_ECHO ||
-+ ih->type == ICMP_TIMESTAMP ||
-+ ih->type == ICMP_INFO_REQUEST ||
-+ ih->type == ICMP_ADDRESS)
-+ )))
-+ portp = (u8*)&ih->un.echo.id;
-+ }
-+
-+ if ((portp && &portp[2] <= end) || psidlen == 0) {
-+ int frombyte = fmr->ip6_prefix_len / 8;
-+ int fromrem = fmr->ip6_prefix_len % 8;
-+ int bytes = sizeof(struct in6_addr) - frombyte;
-+ const u32 *addr = (use_dest_addr) ? &iph->daddr : &iph->saddr;
-+ u64 eabits = ((u64)ntohl(*addr)) << (32 + fmr->ip4_prefix_len);
-+ u64 t = 0;
-+
-+ /* extract PSID from port and add it to eabits */
-+ u16 psidbits = 0;
-+ if (psidlen > 0) {
-+ psidbits = ((u16)portp[0]) << 8 | ((u16)portp[1]);
-+ psidbits >>= 16 - psidlen - fmr->offset;
-+ psidbits = (u16)(psidbits << (16 - psidlen));
-+ eabits |= ((u64)psidbits) << (48 - (fmr->ea_len - psidlen));
-+ }
-+
-+ /* rewrite destination address */
-+ *dest = fmr->ip6_prefix;
-+ memcpy(&dest->s6_addr[10], addr, sizeof(*addr));
-+ dest->s6_addr16[7] = htons(psidbits >> (16 - psidlen));
-+
-+ if (bytes > sizeof(u64))
-+ bytes = sizeof(u64);
-+
-+ /* insert eabits */
-+ memcpy(&t, &dest->s6_addr[frombyte], bytes);
-+ t = be64_to_cpu(t) & ~(((((u64)1) << fmr->ea_len) - 1)
-+ << (64 - fmr->ea_len - fromrem));
-+ t = cpu_to_be64(t | (eabits >> fromrem));
-+ memcpy(&dest->s6_addr[frombyte], &t, bytes);
-+ }
-+}
-+
-+
- static int __ip6_tnl_rcv(struct ip6_tnl *tunnel, struct sk_buff *skb,
- const struct tnl_ptk_info *tpi,
- struct metadata_dst *tun_dst,
-@@ -824,6 +942,27 @@ static int __ip6_tnl_rcv(struct ip6_tnl
- skb_reset_network_header(skb);
- memset(skb->cb, 0, sizeof(struct inet6_skb_parm));
-
-+ if (tpi->proto == htons(ETH_P_IP) && tunnel->parms.fmrs &&
-+ !ipv6_addr_equal(&ipv6h->saddr, &tunnel->parms.raddr)) {
-+ /* Packet didn't come from BR, so lookup FMR */
-+ struct __ip6_tnl_fmr *fmr;
-+ struct in6_addr expected = tunnel->parms.raddr;
-+ for (fmr = tunnel->parms.fmrs; fmr; fmr = fmr->next)
-+ if (ipv6_prefix_equal(&ipv6h->saddr,
-+ &fmr->ip6_prefix, fmr->ip6_prefix_len))
-+ break;
-+
-+ /* Check that IPv6 matches IPv4 source to prevent spoofing */
-+ if (fmr)
-+ ip4ip6_fmr_calc(&expected, ip_hdr(skb),
-+ skb_tail_pointer(skb), fmr, false);
-+
-+ if (!ipv6_addr_equal(&ipv6h->saddr, &expected)) {
-+ rcu_read_unlock();
-+ goto drop;
-+ }
-+ }
-+
- __skb_tunnel_rx(skb, tunnel->dev, tunnel->net);
-
- err = dscp_ecn_decapsulate(tunnel, ipv6h, skb);
-@@ -956,6 +1095,7 @@ static void init_tel_txopt(struct ipv6_t
- opt->ops.opt_nflen = 8;
- }
-
-+
- /**
- * ip6_tnl_addr_conflict - compare packet addresses to tunnel's own
- * @t: the outgoing tunnel device
-@@ -1308,6 +1448,7 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str
- {
- struct ip6_tnl *t = netdev_priv(dev);
- struct ipv6hdr *ipv6h;
-+ struct __ip6_tnl_fmr *fmr;
- int encap_limit = -1;
- __u16 offset;
- struct flowi6 fl6;
-@@ -1373,6 +1514,18 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str
- fl6.flowi6_uid = sock_net_uid(dev_net(dev), NULL);
- dsfield = INET_ECN_encapsulate(dsfield, ipv6_get_dsfield(ipv6h));
-
-+ /* try to find matching FMR */
-+ for (fmr = t->parms.fmrs; fmr; fmr = fmr->next) {
-+ unsigned mshift = 32 - fmr->ip4_prefix_len;
-+ if (ntohl(fmr->ip4_prefix.s_addr) >> mshift ==
-+ ntohl(ip_hdr(skb)->daddr) >> mshift)
-+ break;
-+ }
-+
-+ /* change dstaddr according to FMR */
-+ if (fmr)
-+ ip4ip6_fmr_calc(&fl6.daddr, ip_hdr(skb), skb_tail_pointer(skb), fmr, true);
-+
- if (iptunnel_handle_offloads(skb, SKB_GSO_IPXIP6))
- return -1;
-
-@@ -1502,6 +1655,14 @@ ip6_tnl_change(struct ip6_tnl *t, const
- t->parms.link = p->link;
- t->parms.proto = p->proto;
- t->parms.fwmark = p->fwmark;
-+
-+ while (t->parms.fmrs) {
-+ struct __ip6_tnl_fmr *next = t->parms.fmrs->next;
-+ kfree(t->parms.fmrs);
-+ t->parms.fmrs = next;
-+ }
-+ t->parms.fmrs = p->fmrs;
-+
- dst_cache_reset(&t->dst_cache);
- ip6_tnl_link_config(t);
- return 0;
-@@ -1540,6 +1701,7 @@ ip6_tnl_parm_from_user(struct __ip6_tnl_
- p->flowinfo = u->flowinfo;
- p->link = u->link;
- p->proto = u->proto;
-+ p->fmrs = NULL;
- memcpy(p->name, u->name, sizeof(u->name));
- }
-
-@@ -1924,6 +2086,15 @@ static int ip6_tnl_validate(struct nlatt
- return 0;
- }
-
-+static const struct nla_policy ip6_tnl_fmr_policy[IFLA_IPTUN_FMR_MAX + 1] = {
-+ [IFLA_IPTUN_FMR_IP6_PREFIX] = { .len = sizeof(struct in6_addr) },
-+ [IFLA_IPTUN_FMR_IP4_PREFIX] = { .len = sizeof(struct in_addr) },
-+ [IFLA_IPTUN_FMR_IP6_PREFIX_LEN] = { .type = NLA_U8 },
-+ [IFLA_IPTUN_FMR_IP4_PREFIX_LEN] = { .type = NLA_U8 },
-+ [IFLA_IPTUN_FMR_EA_LEN] = { .type = NLA_U8 },
-+ [IFLA_IPTUN_FMR_OFFSET] = { .type = NLA_U8 }
-+};
-+
- static void ip6_tnl_netlink_parms(struct nlattr *data[],
- struct __ip6_tnl_parm *parms)
- {
-@@ -1961,6 +2132,46 @@ static void ip6_tnl_netlink_parms(struct
-
- if (data[IFLA_IPTUN_FWMARK])
- parms->fwmark = nla_get_u32(data[IFLA_IPTUN_FWMARK]);
-+
-+ if (data[IFLA_IPTUN_FMRS]) {
-+ unsigned rem;
-+ struct nlattr *fmr;
-+ nla_for_each_nested(fmr, data[IFLA_IPTUN_FMRS], rem) {
-+ struct nlattr *fmrd[IFLA_IPTUN_FMR_MAX + 1], *c;
-+ struct __ip6_tnl_fmr *nfmr;
-+
-+ nla_parse_nested(fmrd, IFLA_IPTUN_FMR_MAX,
-+ fmr, ip6_tnl_fmr_policy, NULL);
-+
-+ if (!(nfmr = kzalloc(sizeof(*nfmr), GFP_KERNEL)))
-+ continue;
-+
-+ nfmr->offset = 6;
-+
-+ if ((c = fmrd[IFLA_IPTUN_FMR_IP6_PREFIX]))
-+ nla_memcpy(&nfmr->ip6_prefix, fmrd[IFLA_IPTUN_FMR_IP6_PREFIX],
-+ sizeof(nfmr->ip6_prefix));
-+
-+ if ((c = fmrd[IFLA_IPTUN_FMR_IP4_PREFIX]))
-+ nla_memcpy(&nfmr->ip4_prefix, fmrd[IFLA_IPTUN_FMR_IP4_PREFIX],
-+ sizeof(nfmr->ip4_prefix));
-+
-+ if ((c = fmrd[IFLA_IPTUN_FMR_IP6_PREFIX_LEN]))
-+ nfmr->ip6_prefix_len = nla_get_u8(c);
-+
-+ if ((c = fmrd[IFLA_IPTUN_FMR_IP4_PREFIX_LEN]))
-+ nfmr->ip4_prefix_len = nla_get_u8(c);
-+
-+ if ((c = fmrd[IFLA_IPTUN_FMR_EA_LEN]))
-+ nfmr->ea_len = nla_get_u8(c);
-+
-+ if ((c = fmrd[IFLA_IPTUN_FMR_OFFSET]))
-+ nfmr->offset = nla_get_u8(c);
-+
-+ nfmr->next = parms->fmrs;
-+ parms->fmrs = nfmr;
-+ }
-+ }
- }
-
- static bool ip6_tnl_netlink_encap_parms(struct nlattr *data[],
-@@ -2076,6 +2287,12 @@ static void ip6_tnl_dellink(struct net_d
-
- static size_t ip6_tnl_get_size(const struct net_device *dev)
- {
-+ const struct ip6_tnl *t = netdev_priv(dev);
-+ struct __ip6_tnl_fmr *c;
-+ int fmrs = 0;
-+ for (c = t->parms.fmrs; c; c = c->next)
-+ ++fmrs;
-+
- return
- /* IFLA_IPTUN_LINK */
- nla_total_size(4) +
-@@ -2105,6 +2322,24 @@ static size_t ip6_tnl_get_size(const str
- nla_total_size(0) +
- /* IFLA_IPTUN_FWMARK */
- nla_total_size(4) +
-+ /* IFLA_IPTUN_FMRS */
-+ nla_total_size(0) +
-+ (
-+ /* nest */
-+ nla_total_size(0) +
-+ /* IFLA_IPTUN_FMR_IP6_PREFIX */
-+ nla_total_size(sizeof(struct in6_addr)) +
-+ /* IFLA_IPTUN_FMR_IP4_PREFIX */
-+ nla_total_size(sizeof(struct in_addr)) +
-+ /* IFLA_IPTUN_FMR_EA_LEN */
-+ nla_total_size(1) +
-+ /* IFLA_IPTUN_FMR_IP6_PREFIX_LEN */
-+ nla_total_size(1) +
-+ /* IFLA_IPTUN_FMR_IP4_PREFIX_LEN */
-+ nla_total_size(1) +
-+ /* IFLA_IPTUN_FMR_OFFSET */
-+ nla_total_size(1)
-+ ) * fmrs +
- 0;
- }
-
-@@ -2112,6 +2347,9 @@ static int ip6_tnl_fill_info(struct sk_b
- {
- struct ip6_tnl *tunnel = netdev_priv(dev);
- struct __ip6_tnl_parm *parm = &tunnel->parms;
-+ struct __ip6_tnl_fmr *c;
-+ int fmrcnt = 0;
-+ struct nlattr *fmrs;
-
- if (nla_put_u32(skb, IFLA_IPTUN_LINK, parm->link) ||
- nla_put_in6_addr(skb, IFLA_IPTUN_LOCAL, &parm->laddr) ||
-@@ -2121,9 +2359,27 @@ static int ip6_tnl_fill_info(struct sk_b
- nla_put_be32(skb, IFLA_IPTUN_FLOWINFO, parm->flowinfo) ||
- nla_put_u32(skb, IFLA_IPTUN_FLAGS, parm->flags) ||
- nla_put_u8(skb, IFLA_IPTUN_PROTO, parm->proto) ||
-- nla_put_u32(skb, IFLA_IPTUN_FWMARK, parm->fwmark))
-+ nla_put_u32(skb, IFLA_IPTUN_FWMARK, parm->fwmark) ||
-+ !(fmrs = nla_nest_start(skb, IFLA_IPTUN_FMRS)))
- goto nla_put_failure;
-
-+ for (c = parm->fmrs; c; c = c->next) {
-+ struct nlattr *fmr = nla_nest_start(skb, ++fmrcnt);
-+ if (!fmr ||
-+ nla_put(skb, IFLA_IPTUN_FMR_IP6_PREFIX,
-+ sizeof(c->ip6_prefix), &c->ip6_prefix) ||
-+ nla_put(skb, IFLA_IPTUN_FMR_IP4_PREFIX,
-+ sizeof(c->ip4_prefix), &c->ip4_prefix) ||
-+ nla_put_u8(skb, IFLA_IPTUN_FMR_IP6_PREFIX_LEN, c->ip6_prefix_len) ||
-+ nla_put_u8(skb, IFLA_IPTUN_FMR_IP4_PREFIX_LEN, c->ip4_prefix_len) ||
-+ nla_put_u8(skb, IFLA_IPTUN_FMR_EA_LEN, c->ea_len) ||
-+ nla_put_u8(skb, IFLA_IPTUN_FMR_OFFSET, c->offset))
-+ goto nla_put_failure;
-+
-+ nla_nest_end(skb, fmr);
-+ }
-+ nla_nest_end(skb, fmrs);
-+
- if (nla_put_u16(skb, IFLA_IPTUN_ENCAP_TYPE, tunnel->encap.type) ||
- nla_put_be16(skb, IFLA_IPTUN_ENCAP_SPORT, tunnel->encap.sport) ||
- nla_put_be16(skb, IFLA_IPTUN_ENCAP_DPORT, tunnel->encap.dport) ||
-@@ -2163,6 +2419,7 @@ static const struct nla_policy ip6_tnl_p
- [IFLA_IPTUN_ENCAP_DPORT] = { .type = NLA_U16 },
- [IFLA_IPTUN_COLLECT_METADATA] = { .type = NLA_FLAG },
- [IFLA_IPTUN_FWMARK] = { .type = NLA_U32 },
-+ [IFLA_IPTUN_FMRS] = { .type = NLA_NESTED },
- };
-
- static struct rtnl_link_ops ip6_link_ops __read_mostly = {
+++ /dev/null
-From: Jonas Gorski <jogo@openwrt.org>
-Subject: ipv6: allow rejecting with "source address failed policy"
-
-RFC6204 L-14 requires rejecting traffic from invalid addresses with
-ICMPv6 Destination Unreachable, Code 5 (Source address failed ingress/
-egress policy) on the LAN side, so add an appropriate rule for that.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- include/net/netns/ipv6.h | 1 +
- include/uapi/linux/fib_rules.h | 4 +++
- include/uapi/linux/rtnetlink.h | 1 +
- net/ipv4/fib_semantics.c | 4 +++
- net/ipv4/fib_trie.c | 1 +
- net/ipv4/ipmr.c | 1 +
- net/ipv6/fib6_rules.c | 4 +++
- net/ipv6/ip6mr.c | 2 ++
- net/ipv6/route.c | 58 +++++++++++++++++++++++++++++++++++++++++-
- 9 files changed, 75 insertions(+), 1 deletion(-)
-
---- a/include/net/netns/ipv6.h
-+++ b/include/net/netns/ipv6.h
-@@ -78,6 +78,7 @@ struct netns_ipv6 {
- unsigned int fib6_rules_require_fldissect;
- bool fib6_has_custom_rules;
- struct rt6_info *ip6_prohibit_entry;
-+ struct rt6_info *ip6_policy_failed_entry;
- struct rt6_info *ip6_blk_hole_entry;
- struct fib6_table *fib6_local_tbl;
- struct fib_rules_ops *fib6_rules_ops;
---- a/include/uapi/linux/fib_rules.h
-+++ b/include/uapi/linux/fib_rules.h
-@@ -82,6 +82,10 @@ enum {
- FR_ACT_BLACKHOLE, /* Drop without notification */
- FR_ACT_UNREACHABLE, /* Drop with ENETUNREACH */
- FR_ACT_PROHIBIT, /* Drop with EACCES */
-+ FR_ACT_RES9,
-+ FR_ACT_RES10,
-+ FR_ACT_RES11,
-+ FR_ACT_POLICY_FAILED, /* Drop with EACCES */
- __FR_ACT_MAX,
- };
-
---- a/include/uapi/linux/rtnetlink.h
-+++ b/include/uapi/linux/rtnetlink.h
-@@ -228,6 +228,7 @@ enum {
- RTN_THROW, /* Not in this table */
- RTN_NAT, /* Translate this address */
- RTN_XRESOLVE, /* Use external resolver */
-+ RTN_POLICY_FAILED, /* Failed ingress/egress policy */
- __RTN_MAX
- };
-
---- a/net/ipv4/fib_semantics.c
-+++ b/net/ipv4/fib_semantics.c
-@@ -139,6 +139,10 @@ const struct fib_prop fib_props[RTN_MAX
- .error = -EINVAL,
- .scope = RT_SCOPE_NOWHERE,
- },
-+ [RTN_POLICY_FAILED] = {
-+ .error = -EACCES,
-+ .scope = RT_SCOPE_UNIVERSE,
-+ },
- };
-
- static void rt_fibinfo_free(struct rtable __rcu **rtp)
---- a/net/ipv4/fib_trie.c
-+++ b/net/ipv4/fib_trie.c
-@@ -2477,6 +2477,7 @@ static const char *const rtn_type_names[
- [RTN_THROW] = "THROW",
- [RTN_NAT] = "NAT",
- [RTN_XRESOLVE] = "XRESOLVE",
-+ [RTN_POLICY_FAILED] = "POLICY_FAILED",
- };
-
- static inline const char *rtn_type(char *buf, size_t len, unsigned int t)
---- a/net/ipv4/ipmr.c
-+++ b/net/ipv4/ipmr.c
-@@ -179,6 +179,7 @@ static int ipmr_rule_action(struct fib_r
- case FR_ACT_UNREACHABLE:
- return -ENETUNREACH;
- case FR_ACT_PROHIBIT:
-+ case FR_ACT_POLICY_FAILED:
- return -EACCES;
- case FR_ACT_BLACKHOLE:
- default:
---- a/net/ipv6/fib6_rules.c
-+++ b/net/ipv6/fib6_rules.c
-@@ -221,6 +221,10 @@ static int __fib6_rule_action(struct fib
- err = -EACCES;
- rt = net->ipv6.ip6_prohibit_entry;
- goto discard_pkt;
-+ case FR_ACT_POLICY_FAILED:
-+ err = -EACCES;
-+ rt = net->ipv6.ip6_policy_failed_entry;
-+ goto discard_pkt;
- }
-
- tb_id = fib_rule_get_table(rule, arg);
---- a/net/ipv6/ip6mr.c
-+++ b/net/ipv6/ip6mr.c
-@@ -162,6 +162,8 @@ static int ip6mr_rule_action(struct fib_
- return -ENETUNREACH;
- case FR_ACT_PROHIBIT:
- return -EACCES;
-+ case FR_ACT_POLICY_FAILED:
-+ return -EACCES;
- case FR_ACT_BLACKHOLE:
- default:
- return -EINVAL;
---- a/net/ipv6/route.c
-+++ b/net/ipv6/route.c
-@@ -97,6 +97,8 @@ static int ip6_pkt_discard(struct sk_bu
- static int ip6_pkt_discard_out(struct net *net, struct sock *sk, struct sk_buff *skb);
- static int ip6_pkt_prohibit(struct sk_buff *skb);
- static int ip6_pkt_prohibit_out(struct net *net, struct sock *sk, struct sk_buff *skb);
-+static int ip6_pkt_policy_failed(struct sk_buff *skb);
-+static int ip6_pkt_policy_failed_out(struct net *net, struct sock *sk, struct sk_buff *skb);
- static void ip6_link_failure(struct sk_buff *skb);
- static void ip6_rt_update_pmtu(struct dst_entry *dst, struct sock *sk,
- struct sk_buff *skb, u32 mtu,
-@@ -328,6 +330,18 @@ static const struct rt6_info ip6_prohibi
- .rt6i_flags = (RTF_REJECT | RTF_NONEXTHOP),
- };
-
-+static const struct rt6_info ip6_policy_failed_entry_template = {
-+ .dst = {
-+ .__refcnt = ATOMIC_INIT(1),
-+ .__use = 1,
-+ .obsolete = DST_OBSOLETE_FORCE_CHK,
-+ .error = -EACCES,
-+ .input = ip6_pkt_policy_failed,
-+ .output = ip6_pkt_policy_failed_out,
-+ },
-+ .rt6i_flags = (RTF_REJECT | RTF_NONEXTHOP),
-+};
-+
- static const struct rt6_info ip6_blk_hole_entry_template = {
- .dst = {
- .__refcnt = ATOMIC_INIT(1),
-@@ -906,6 +920,7 @@ static const int fib6_prop[RTN_MAX + 1]
- [RTN_BLACKHOLE] = -EINVAL,
- [RTN_UNREACHABLE] = -EHOSTUNREACH,
- [RTN_PROHIBIT] = -EACCES,
-+ [RTN_POLICY_FAILED] = -EACCES,
- [RTN_THROW] = -EAGAIN,
- [RTN_NAT] = -EINVAL,
- [RTN_XRESOLVE] = -EINVAL,
-@@ -943,6 +958,10 @@ static void ip6_rt_init_dst_reject(struc
- rt->dst.output = ip6_pkt_prohibit_out;
- rt->dst.input = ip6_pkt_prohibit;
- break;
-+ case RTN_POLICY_FAILED:
-+ rt->dst.output = ip6_pkt_policy_failed_out;
-+ rt->dst.input = ip6_pkt_policy_failed;
-+ break;
- case RTN_THROW:
- case RTN_UNREACHABLE:
- default:
-@@ -3791,6 +3810,17 @@ static int ip6_pkt_prohibit_out(struct n
- return ip6_pkt_drop(skb, ICMPV6_ADM_PROHIBITED, IPSTATS_MIB_OUTNOROUTES);
- }
-
-+static int ip6_pkt_policy_failed(struct sk_buff *skb)
-+{
-+ return ip6_pkt_drop(skb, ICMPV6_POLICY_FAIL, IPSTATS_MIB_INNOROUTES);
-+}
-+
-+static int ip6_pkt_policy_failed_out(struct net *net, struct sock *sk, struct sk_buff *skb)
-+{
-+ skb->dev = skb_dst(skb)->dev;
-+ return ip6_pkt_drop(skb, ICMPV6_POLICY_FAIL, IPSTATS_MIB_OUTNOROUTES);
-+}
-+
- /*
- * Allocate a dst for local (unicast / anycast) address.
- */
-@@ -4238,7 +4268,8 @@ static int rtm_to_fib6_config(struct sk_
- if (rtm->rtm_type == RTN_UNREACHABLE ||
- rtm->rtm_type == RTN_BLACKHOLE ||
- rtm->rtm_type == RTN_PROHIBIT ||
-- rtm->rtm_type == RTN_THROW)
-+ rtm->rtm_type == RTN_THROW ||
-+ rtm->rtm_type == RTN_POLICY_FAILED)
- cfg->fc_flags |= RTF_REJECT;
-
- if (rtm->rtm_type == RTN_LOCAL)
-@@ -5087,6 +5118,8 @@ static int ip6_route_dev_notify(struct n
- #ifdef CONFIG_IPV6_MULTIPLE_TABLES
- net->ipv6.ip6_prohibit_entry->dst.dev = dev;
- net->ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(dev);
-+ net->ipv6.ip6_policy_failed_entry->dst.dev = dev;
-+ net->ipv6.ip6_policy_failed_entry->rt6i_idev = in6_dev_get(dev);
- net->ipv6.ip6_blk_hole_entry->dst.dev = dev;
- net->ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(dev);
- #endif
-@@ -5098,6 +5131,7 @@ static int ip6_route_dev_notify(struct n
- in6_dev_put_clear(&net->ipv6.ip6_null_entry->rt6i_idev);
- #ifdef CONFIG_IPV6_MULTIPLE_TABLES
- in6_dev_put_clear(&net->ipv6.ip6_prohibit_entry->rt6i_idev);
-+ in6_dev_put_clear(&net->ipv6.ip6_policy_failed_entry->rt6i_idev);
- in6_dev_put_clear(&net->ipv6.ip6_blk_hole_entry->rt6i_idev);
- #endif
- }
-@@ -5292,6 +5326,15 @@ static int __net_init ip6_route_net_init
- net->ipv6.ip6_blk_hole_entry->dst.ops = &net->ipv6.ip6_dst_ops;
- dst_init_metrics(&net->ipv6.ip6_blk_hole_entry->dst,
- ip6_template_metrics, true);
-+
-+ net->ipv6.ip6_policy_failed_entry =
-+ kmemdup(&ip6_policy_failed_entry_template,
-+ sizeof(*net->ipv6.ip6_policy_failed_entry), GFP_KERNEL);
-+ if (!net->ipv6.ip6_policy_failed_entry)
-+ goto out_ip6_blk_hole_entry;
-+ net->ipv6.ip6_policy_failed_entry->dst.ops = &net->ipv6.ip6_dst_ops;
-+ dst_init_metrics(&net->ipv6.ip6_policy_failed_entry->dst,
-+ ip6_template_metrics, true);
- #endif
-
- net->ipv6.sysctl.flush_delay = 0;
-@@ -5310,6 +5353,8 @@ out:
- return ret;
-
- #ifdef CONFIG_IPV6_MULTIPLE_TABLES
-+out_ip6_blk_hole_entry:
-+ kfree(net->ipv6.ip6_blk_hole_entry);
- out_ip6_prohibit_entry:
- kfree(net->ipv6.ip6_prohibit_entry);
- out_ip6_null_entry:
-@@ -5330,6 +5375,7 @@ static void __net_exit ip6_route_net_exi
- #ifdef CONFIG_IPV6_MULTIPLE_TABLES
- kfree(net->ipv6.ip6_prohibit_entry);
- kfree(net->ipv6.ip6_blk_hole_entry);
-+ kfree(net->ipv6.ip6_policy_failed_entry);
- #endif
- dst_entries_destroy(&net->ipv6.ip6_dst_ops);
- }
-@@ -5406,6 +5452,9 @@ void __init ip6_route_init_special_entri
- init_net.ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev);
- init_net.ipv6.ip6_blk_hole_entry->dst.dev = init_net.loopback_dev;
- init_net.ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev);
-+ init_net.ipv6.ip6_policy_failed_entry->dst.dev = init_net.loopback_dev;
-+ init_net.ipv6.ip6_policy_failed_entry->rt6i_idev =
-+ in6_dev_get(init_net.loopback_dev);
- #endif
- }
-
+++ /dev/null
-From: Jonas Gorski <jogo@openwrt.org>
-Subject: net: provide defines for _POLICY_FAILED until all code is updated
-
-Upstream introduced ICMPV6_POLICY_FAIL for code 5 of destination
-unreachable, conflicting with our name.
-
-Add appropriate defines to allow our code to build with the new
-name until we have updated our local patches for older kernels
-and userspace packages.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- include/uapi/linux/fib_rules.h | 2 ++
- include/uapi/linux/icmpv6.h | 2 ++
- include/uapi/linux/rtnetlink.h | 2 ++
- 3 files changed, 6 insertions(+)
-
---- a/include/uapi/linux/fib_rules.h
-+++ b/include/uapi/linux/fib_rules.h
-@@ -89,6 +89,8 @@ enum {
- __FR_ACT_MAX,
- };
-
-+#define FR_ACT_FAILED_POLICY FR_ACT_POLICY_FAILED
-+
- #define FR_ACT_MAX (__FR_ACT_MAX - 1)
-
- #endif
---- a/include/uapi/linux/icmpv6.h
-+++ b/include/uapi/linux/icmpv6.h
-@@ -119,6 +119,8 @@ struct icmp6hdr {
- #define ICMPV6_POLICY_FAIL 5
- #define ICMPV6_REJECT_ROUTE 6
-
-+#define ICMPV6_FAILED_POLICY ICMPV6_POLICY_FAIL
-+
- /*
- * Codes for Time Exceeded
- */
---- a/include/uapi/linux/rtnetlink.h
-+++ b/include/uapi/linux/rtnetlink.h
-@@ -232,6 +232,8 @@ enum {
- __RTN_MAX
- };
-
-+#define RTN_FAILED_POLICY RTN_POLICY_FAILED
-+
- #define RTN_MAX (__RTN_MAX - 1)
-
-
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Subject: net: replace GRO optimization patch with a new one that supports VLANs/bridges with different MAC addresses
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- include/linux/netdevice.h | 2 ++
- include/linux/skbuff.h | 3 ++-
- net/core/dev.c | 48 +++++++++++++++++++++++++++++++++++++++++++++++
- net/ethernet/eth.c | 18 +++++++++++++++++-
- 4 files changed, 69 insertions(+), 2 deletions(-)
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -1891,6 +1891,8 @@ struct net_device {
- struct netdev_hw_addr_list mc;
- struct netdev_hw_addr_list dev_addrs;
-
-+ unsigned char local_addr_mask[MAX_ADDR_LEN];
-+
- #ifdef CONFIG_SYSFS
- struct kset *queues_kset;
- #endif
---- a/include/linux/skbuff.h
-+++ b/include/linux/skbuff.h
-@@ -799,6 +799,7 @@ struct sk_buff {
- #ifdef CONFIG_TLS_DEVICE
- __u8 decrypted:1;
- #endif
-+ __u8 gro_skip:1;
-
- #ifdef CONFIG_NET_SCHED
- __u16 tc_index; /* traffic control index */
---- a/net/core/dev.c
-+++ b/net/core/dev.c
-@@ -5461,6 +5461,9 @@ static enum gro_result dev_gro_receive(s
- int same_flow;
- int grow;
-
-+ if (skb->gro_skip)
-+ goto normal;
-+
- if (netif_elide_gro(skb->dev))
- goto normal;
-
-@@ -7119,6 +7122,48 @@ static void __netdev_adjacent_dev_unlink
- &upper_dev->adj_list.lower);
- }
-
-+static void __netdev_addr_mask(unsigned char *mask, const unsigned char *addr,
-+ struct net_device *dev)
-+{
-+ int i;
-+
-+ for (i = 0; i < dev->addr_len; i++)
-+ mask[i] |= addr[i] ^ dev->dev_addr[i];
-+}
-+
-+static void __netdev_upper_mask(unsigned char *mask, struct net_device *dev,
-+ struct net_device *lower)
-+{
-+ struct net_device *cur;
-+ struct list_head *iter;
-+
-+ netdev_for_each_upper_dev_rcu(dev, cur, iter) {
-+ __netdev_addr_mask(mask, cur->dev_addr, lower);
-+ __netdev_upper_mask(mask, cur, lower);
-+ }
-+}
-+
-+static void __netdev_update_addr_mask(struct net_device *dev)
-+{
-+ unsigned char mask[MAX_ADDR_LEN];
-+ struct net_device *cur;
-+ struct list_head *iter;
-+
-+ memset(mask, 0, sizeof(mask));
-+ __netdev_upper_mask(mask, dev, dev);
-+ memcpy(dev->local_addr_mask, mask, dev->addr_len);
-+
-+ netdev_for_each_lower_dev(dev, cur, iter)
-+ __netdev_update_addr_mask(cur);
-+}
-+
-+static void netdev_update_addr_mask(struct net_device *dev)
-+{
-+ rcu_read_lock();
-+ __netdev_update_addr_mask(dev);
-+ rcu_read_unlock();
-+}
-+
- static int __netdev_upper_dev_link(struct net_device *dev,
- struct net_device *upper_dev, bool master,
- void *upper_priv, void *upper_info,
-@@ -7169,6 +7214,7 @@ static int __netdev_upper_dev_link(struc
- if (ret)
- return ret;
-
-+ netdev_update_addr_mask(dev);
- ret = call_netdevice_notifiers_info(NETDEV_CHANGEUPPER,
- &changeupper_info.info);
- ret = notifier_to_errno(ret);
-@@ -7261,6 +7307,7 @@ void netdev_upper_dev_unlink(struct net_
-
- __netdev_adjacent_dev_unlink_neighbour(dev, upper_dev);
-
-+ netdev_update_addr_mask(dev);
- call_netdevice_notifiers_info(NETDEV_CHANGEUPPER,
- &changeupper_info.info);
-
-@@ -7900,6 +7947,7 @@ int dev_set_mac_address(struct net_devic
- if (err)
- return err;
- dev->addr_assign_type = NET_ADDR_SET;
-+ netdev_update_addr_mask(dev);
- call_netdevice_notifiers(NETDEV_CHANGEADDR, dev);
- add_device_randomness(dev->dev_addr, dev->addr_len);
- return 0;
---- a/net/ethernet/eth.c
-+++ b/net/ethernet/eth.c
-@@ -144,6 +144,18 @@ u32 eth_get_headlen(void *data, unsigned
- }
- EXPORT_SYMBOL(eth_get_headlen);
-
-+static inline bool
-+eth_check_local_mask(const void *addr1, const void *addr2, const void *mask)
-+{
-+ const u16 *a1 = addr1;
-+ const u16 *a2 = addr2;
-+ const u16 *m = mask;
-+
-+ return (((a1[0] ^ a2[0]) & ~m[0]) |
-+ ((a1[1] ^ a2[1]) & ~m[1]) |
-+ ((a1[2] ^ a2[2]) & ~m[2]));
-+}
-+
- /**
- * eth_type_trans - determine the packet's protocol ID.
- * @skb: received socket data
-@@ -172,8 +184,12 @@ __be16 eth_type_trans(struct sk_buff *sk
- skb->pkt_type = PACKET_MULTICAST;
- }
- else if (unlikely(!ether_addr_equal_64bits(eth->h_dest,
-- dev->dev_addr)))
-+ dev->dev_addr))) {
- skb->pkt_type = PACKET_OTHERHOST;
-+ if (eth_check_local_mask(eth->h_dest, dev->dev_addr,
-+ dev->local_addr_mask))
-+ skb->gro_skip = 1;
-+ }
-
- /*
- * Some variants of DSA tagging don't have an ethertype field
+++ /dev/null
-From: John Crispin <blogic@openwrt.org>
-Subject: NET: add mtd-mac-address support to of_get_mac_address()
-
-Many embedded devices have information such as mac addresses stored inside mtd
-devices. This patch allows us to add a property inside a node describing a
-network interface. The new property points at a mtd partition with an offset
-where the mac address can be found.
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/of/of_net.c | 37 +++++++++++++++++++++++++++++++++++++
- include/linux/of_net.h | 1 +
- 2 files changed, 38 insertions(+)
-
---- a/drivers/of/of_net.c
-+++ b/drivers/of/of_net.c
-@@ -11,6 +11,7 @@
- #include <linux/of_net.h>
- #include <linux/phy.h>
- #include <linux/export.h>
-+#include <linux/mtd/mtd.h>
-
- /**
- * of_get_phy_mode - Get phy mode for given device_node
-@@ -39,7 +40,7 @@ int of_get_phy_mode(struct device_node *
- }
- EXPORT_SYMBOL_GPL(of_get_phy_mode);
-
--static const void *of_get_mac_addr(struct device_node *np, const char *name)
-+static void *of_get_mac_addr(struct device_node *np, const char *name)
- {
- struct property *pp = of_find_property(np, name, NULL);
-
-@@ -48,6 +49,79 @@ static const void *of_get_mac_addr(struc
- return NULL;
- }
-
-+static const void *of_get_mac_address_mtd(struct device_node *np)
-+{
-+#ifdef CONFIG_MTD
-+ struct device_node *mtd_np = NULL;
-+ struct property *prop;
-+ size_t retlen;
-+ int size, ret;
-+ struct mtd_info *mtd;
-+ const char *part;
-+ const __be32 *list;
-+ phandle phandle;
-+ u32 mac_inc = 0;
-+ u8 mac[ETH_ALEN];
-+ void *addr;
-+ u32 inc_idx;
-+
-+ list = of_get_property(np, "mtd-mac-address", &size);
-+ if (!list || (size != (2 * sizeof(*list))))
-+ return NULL;
-+
-+ phandle = be32_to_cpup(list++);
-+ if (phandle)
-+ mtd_np = of_find_node_by_phandle(phandle);
-+
-+ if (!mtd_np)
-+ return NULL;
-+
-+ part = of_get_property(mtd_np, "label", NULL);
-+ if (!part)
-+ part = mtd_np->name;
-+
-+ mtd = get_mtd_device_nm(part);
-+ if (IS_ERR(mtd))
-+ return NULL;
-+
-+ ret = mtd_read(mtd, be32_to_cpup(list), 6, &retlen, mac);
-+ put_mtd_device(mtd);
-+
-+ if (of_property_read_u32(np, "mtd-mac-address-increment-byte", &inc_idx))
-+ inc_idx = 5;
-+ if (inc_idx > 5)
-+ return NULL;
-+
-+ if (!of_property_read_u32(np, "mtd-mac-address-increment", &mac_inc))
-+ mac[inc_idx] += mac_inc;
-+
-+ if (!is_valid_ether_addr(mac))
-+ return NULL;
-+
-+ addr = of_get_mac_addr(np, "mac-address");
-+ if (addr) {
-+ memcpy(addr, mac, ETH_ALEN);
-+ return addr;
-+ }
-+
-+ prop = kzalloc(sizeof(*prop), GFP_KERNEL);
-+ if (!prop)
-+ return NULL;
-+
-+ prop->name = "mac-address";
-+ prop->length = ETH_ALEN;
-+ prop->value = kmemdup(mac, ETH_ALEN, GFP_KERNEL);
-+ if (!prop->value || of_add_property(np, prop))
-+ goto free;
-+
-+ return prop->value;
-+free:
-+ kfree(prop->value);
-+ kfree(prop);
-+#endif
-+ return NULL;
-+}
-+
- /**
- * Search the device tree for the best MAC address to use. 'mac-address' is
- * checked first, because that is supposed to contain to "most recent" MAC
-@@ -65,11 +139,18 @@ static const void *of_get_mac_addr(struc
- * addresses. Some older U-Boots only initialized 'local-mac-address'. In
- * this case, the real MAC is in 'local-mac-address', and 'mac-address' exists
- * but is all zeros.
-+ *
-+ * If a mtd-mac-address property exists, try to fetch the MAC address from the
-+ * specified mtd device, and store it as a 'mac-address' property
- */
- const void *of_get_mac_address(struct device_node *np)
- {
- const void *addr;
-
-+ addr = of_get_mac_address_mtd(np);
-+ if (addr)
-+ return addr;
-+
- addr = of_get_mac_addr(np, "mac-address");
- if (addr)
- return addr;
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Date: Sun, 26 Jul 2020 14:03:21 +0200
-Subject: [PATCH] net: add support for threaded NAPI polling
-
-For some drivers (especially 802.11 drivers), doing a lot of work in the NAPI
-poll function does not perform well. Since NAPI poll is bound to the CPU it
-was scheduled from, we can easily end up with a few very busy CPUs spending
-most of their time in softirq/ksoftirqd and some idle ones.
-
-Introduce threaded NAPI for such drivers based on a workqueue. The API is the
-same except for using netif_threaded_napi_add instead of netif_napi_add.
-
-In my tests with mt76 on MT7621 using threaded NAPI + a thread for tx scheduling
-improves LAN->WLAN bridging throughput by 10-50%. Throughput without threaded
-NAPI is wildly inconsistent, depending on the CPU that runs the tx scheduling
-thread.
-
-With threaded NAPI it seems stable and consistent (and higher than the best
-results I got without it).
-
-Based on a patch by Hillf Danton
-
-Cc: Hillf Danton <hdanton@sina.com>
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
-
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -339,6 +339,7 @@ struct napi_struct {
- struct list_head dev_list;
- struct hlist_node napi_hash_node;
- unsigned int napi_id;
-+ struct work_struct work;
- };
-
- enum {
-@@ -349,6 +350,7 @@ enum {
- NAPI_STATE_HASHED, /* In NAPI hash (busy polling possible) */
- NAPI_STATE_NO_BUSY_POLL,/* Do not add in napi_hash, no busy polling */
- NAPI_STATE_IN_BUSY_POLL,/* sk_busy_loop() owns this NAPI */
-+ NAPI_STATE_THREADED, /* Use threaded NAPI */
- };
-
- enum {
-@@ -359,6 +361,7 @@ enum {
- NAPIF_STATE_HASHED = BIT(NAPI_STATE_HASHED),
- NAPIF_STATE_NO_BUSY_POLL = BIT(NAPI_STATE_NO_BUSY_POLL),
- NAPIF_STATE_IN_BUSY_POLL = BIT(NAPI_STATE_IN_BUSY_POLL),
-+ NAPIF_STATE_THREADED = BIT(NAPI_STATE_THREADED),
- };
-
- enum gro_result {
-@@ -2230,6 +2233,26 @@ void netif_napi_add(struct net_device *d
- int (*poll)(struct napi_struct *, int), int weight);
-
- /**
-+ * netif_threaded_napi_add - initialize a NAPI context
-+ * @dev: network device
-+ * @napi: NAPI context
-+ * @poll: polling function
-+ * @weight: default weight
-+ *
-+ * This variant of netif_napi_add() should be used from drivers using NAPI
-+ * with CPU intensive poll functions.
-+ * This will schedule polling from a high priority workqueue
-+ */
-+static inline void netif_threaded_napi_add(struct net_device *dev,
-+ struct napi_struct *napi,
-+ int (*poll)(struct napi_struct *, int),
-+ int weight)
-+{
-+ set_bit(NAPI_STATE_THREADED, &napi->state);
-+ netif_napi_add(dev, napi, poll, weight);
-+}
-+
-+/**
- * netif_tx_napi_add - initialize a NAPI context
- * @dev: network device
- * @napi: NAPI context
---- a/net/core/dev.c
-+++ b/net/core/dev.c
-@@ -160,6 +160,7 @@ static DEFINE_SPINLOCK(offload_lock);
- struct list_head ptype_base[PTYPE_HASH_SIZE] __read_mostly;
- struct list_head ptype_all __read_mostly; /* Taps */
- static struct list_head offload_base __read_mostly;
-+static struct workqueue_struct *napi_workq __read_mostly;
-
- static int netif_rx_internal(struct sk_buff *skb);
- static int call_netdevice_notifiers_info(unsigned long val,
-@@ -5891,6 +5892,11 @@ void __napi_schedule(struct napi_struct
- {
- unsigned long flags;
-
-+ if (test_bit(NAPI_STATE_THREADED, &n->state)) {
-+ queue_work(napi_workq, &n->work);
-+ return;
-+ }
-+
- local_irq_save(flags);
- ____napi_schedule(this_cpu_ptr(&softnet_data), n);
- local_irq_restore(flags);
-@@ -5938,6 +5944,11 @@ EXPORT_SYMBOL(napi_schedule_prep);
- */
- void __napi_schedule_irqoff(struct napi_struct *n)
- {
-+ if (test_bit(NAPI_STATE_THREADED, &n->state)) {
-+ queue_work(napi_workq, &n->work);
-+ return;
-+ }
-+
- ____napi_schedule(this_cpu_ptr(&softnet_data), n);
- }
- EXPORT_SYMBOL(__napi_schedule_irqoff);
-@@ -6186,6 +6197,82 @@ static void init_gro_hash(struct napi_st
- napi->gro_bitmask = 0;
- }
-
-+static int __napi_poll(struct napi_struct *n, bool *repoll)
-+{
-+ int work, weight;
-+
-+ weight = n->weight;
-+
-+ /* This NAPI_STATE_SCHED test is for avoiding a race
-+ * with netpoll's poll_napi(). Only the entity which
-+ * obtains the lock and sees NAPI_STATE_SCHED set will
-+ * actually make the ->poll() call. Therefore we avoid
-+ * accidentally calling ->poll() when NAPI is not scheduled.
-+ */
-+ work = 0;
-+ if (test_bit(NAPI_STATE_SCHED, &n->state)) {
-+ work = n->poll(n, weight);
-+ trace_napi_poll(n, work, weight);
-+ }
-+
-+ WARN_ON_ONCE(work > weight);
-+
-+ if (likely(work < weight))
-+ return work;
-+
-+ /* Drivers must not modify the NAPI state if they
-+ * consume the entire weight. In such cases this code
-+ * still "owns" the NAPI instance and therefore can
-+ * move the instance around on the list at-will.
-+ */
-+ if (unlikely(napi_disable_pending(n))) {
-+ napi_complete(n);
-+ return work;
-+ }
-+
-+ if (n->gro_bitmask) {
-+ /* flush too old packets
-+ * If HZ < 1000, flush all packets.
-+ */
-+ napi_gro_flush(n, HZ >= 1000);
-+ }
-+
-+ *repoll = true;
-+
-+ return work;
-+}
-+
-+static void napi_workfn(struct work_struct *work)
-+{
-+ struct napi_struct *n = container_of(work, struct napi_struct, work);
-+ void *have;
-+
-+ for (;;) {
-+ bool repoll = false;
-+
-+ local_bh_disable();
-+
-+ have = netpoll_poll_lock(n);
-+ __napi_poll(n, &repoll);
-+ netpoll_poll_unlock(have);
-+
-+ local_bh_enable();
-+
-+ if (!repoll)
-+ return;
-+
-+ if (!need_resched())
-+ continue;
-+
-+ /*
-+ * have to pay for the latency of task switch even if
-+ * napi is scheduled
-+ */
-+ queue_work(napi_workq, work);
-+ return;
-+ }
-+}
-+
- void netif_napi_add(struct net_device *dev, struct napi_struct *napi,
- int (*poll)(struct napi_struct *, int), int weight)
- {
-@@ -6204,6 +6291,7 @@ void netif_napi_add(struct net_device *d
- #ifdef CONFIG_NETPOLL
- napi->poll_owner = -1;
- #endif
-+ INIT_WORK(&napi->work, napi_workfn);
- set_bit(NAPI_STATE_SCHED, &napi->state);
- napi_hash_add(napi);
- }
-@@ -6242,6 +6330,7 @@ static void flush_gro_hash(struct napi_s
- void netif_napi_del(struct napi_struct *napi)
- {
- might_sleep();
-+ cancel_work_sync(&napi->work);
- if (napi_hash_del(napi))
- synchronize_net();
- list_del_init(&napi->dev_list);
-@@ -6254,48 +6343,18 @@ EXPORT_SYMBOL(netif_napi_del);
-
- static int napi_poll(struct napi_struct *n, struct list_head *repoll)
- {
-+ bool do_repoll = false;
- void *have;
-- int work, weight;
-+ int work;
-
- list_del_init(&n->poll_list);
-
- have = netpoll_poll_lock(n);
-
-- weight = n->weight;
--
-- /* This NAPI_STATE_SCHED test is for avoiding a race
-- * with netpoll's poll_napi(). Only the entity which
-- * obtains the lock and sees NAPI_STATE_SCHED set will
-- * actually make the ->poll() call. Therefore we avoid
-- * accidentally calling ->poll() when NAPI is not scheduled.
-- */
-- work = 0;
-- if (test_bit(NAPI_STATE_SCHED, &n->state)) {
-- work = n->poll(n, weight);
-- trace_napi_poll(n, work, weight);
-- }
--
-- WARN_ON_ONCE(work > weight);
--
-- if (likely(work < weight))
-- goto out_unlock;
-+ work = __napi_poll(n, &do_repoll);
-
-- /* Drivers must not modify the NAPI state if they
-- * consume the entire weight. In such cases this code
-- * still "owns" the NAPI instance and therefore can
-- * move the instance around on the list at-will.
-- */
-- if (unlikely(napi_disable_pending(n))) {
-- napi_complete(n);
-+ if (!do_repoll)
- goto out_unlock;
-- }
--
-- if (n->gro_bitmask) {
-- /* flush too old packets
-- * If HZ < 1000, flush all packets.
-- */
-- napi_gro_flush(n, HZ >= 1000);
-- }
-
- /* Some drivers may have called napi_schedule
- * prior to exhausting their budget.
-@@ -9895,6 +9954,10 @@ static int __init net_dev_init(void)
- sd->backlog.weight = weight_p;
- }
-
-+ napi_workq = alloc_workqueue("napi_workq", WQ_UNBOUND | WQ_HIGHPRI,
-+ WQ_UNBOUND_MAX_ACTIVE | WQ_SYSFS);
-+ BUG_ON(!napi_workq);
-+
- dev_boot_phase = 0;
-
- /* The loopback device is special if any other network devices
---- a/net/core/net-sysfs.c
-+++ b/net/core/net-sysfs.c
-@@ -447,6 +447,52 @@ static ssize_t proto_down_store(struct d
- }
- NETDEVICE_SHOW_RW(proto_down, fmt_dec);
-
-+static int change_napi_threaded(struct net_device *dev, unsigned long val)
-+{
-+ struct napi_struct *napi;
-+
-+ if (list_empty(&dev->napi_list))
-+ return -EOPNOTSUPP;
-+
-+ list_for_each_entry(napi, &dev->napi_list, dev_list) {
-+ if (val)
-+ set_bit(NAPI_STATE_THREADED, &napi->state);
-+ else
-+ clear_bit(NAPI_STATE_THREADED, &napi->state);
-+ }
-+
-+ return 0;
-+}
-+
-+static ssize_t napi_threaded_store(struct device *dev,
-+ struct device_attribute *attr,
-+ const char *buf, size_t len)
-+{
-+ return netdev_store(dev, attr, buf, len, change_napi_threaded);
-+}
-+
-+static ssize_t napi_threaded_show(struct device *dev,
-+ struct device_attribute *attr,
-+ char *buf)
-+{
-+ struct net_device *netdev = to_net_dev(dev);
-+ struct napi_struct *napi;
-+ bool enabled = false;
-+
-+ if (!rtnl_trylock())
-+ return restart_syscall();
-+
-+ list_for_each_entry(napi, &netdev->napi_list, dev_list) {
-+ if (test_bit(NAPI_STATE_THREADED, &napi->state))
-+ enabled = true;
-+ }
-+
-+ rtnl_unlock();
-+
-+ return sprintf(buf, fmt_dec, enabled);
-+}
-+static DEVICE_ATTR_RW(napi_threaded);
-+
- static ssize_t phys_port_id_show(struct device *dev,
- struct device_attribute *attr, char *buf)
- {
-@@ -542,6 +588,7 @@ static struct attribute *net_class_attrs
- &dev_attr_flags.attr,
- &dev_attr_tx_queue_len.attr,
- &dev_attr_gro_flush_timeout.attr,
-+ &dev_attr_napi_threaded.attr,
- &dev_attr_phys_port_id.attr,
- &dev_attr_phys_port_name.attr,
- &dev_attr_phys_switch_id.attr,
+++ /dev/null
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: generic: add detach callback to struct phy_driver
-
-lede-commit: fe61fc2d7d0b3fb348b502f68f98243b3ddf5867
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/net/phy/phy_device.c | 3 +++
- include/linux/phy.h | 6 ++++++
- 2 files changed, 9 insertions(+)
-
---- a/drivers/net/phy/phy_device.c
-+++ b/drivers/net/phy/phy_device.c
-@@ -1207,6 +1207,9 @@ void phy_detach(struct phy_device *phyde
- struct module *ndev_owner = dev->dev.parent->driver->owner;
- struct mii_bus *bus;
-
-+ if (phydev->drv && phydev->drv->detach)
-+ phydev->drv->detach(phydev);
-+
- if (phydev->sysfs_links) {
- sysfs_remove_link(&dev->dev.kobj, "phydev");
- sysfs_remove_link(&phydev->mdio.dev.kobj, "attached_dev");
---- a/include/linux/phy.h
-+++ b/include/linux/phy.h
-@@ -569,6 +569,12 @@ struct phy_driver {
- */
- int (*did_interrupt)(struct phy_device *phydev);
-
-+ /*
-+ * Called before an ethernet device is detached
-+ * from the PHY.
-+ */
-+ void (*detach)(struct phy_device *phydev);
-+
- /* Clears up any memory if needed */
- void (*remove)(struct phy_device *phydev);
-
+++ /dev/null
-From: Roman Yeryomin <roman@advem.lv>
-Subject: kernel: add at803x fix for sgmii mode
-
-Some (possibly broken) bootloaders incorreclty initialize at8033
-phy. This patch enables sgmii autonegotiation mode.
-
-[john@phrozen.org: felix added this to his upstream queue]
-
-Signed-off-by: Roman Yeryomin <roman@advem.lv>
----
- drivers/net/phy/at803x.c | 25 +++++++++++++++++++++++++
- 1 file changed, 25 insertions(+)
-
---- a/drivers/net/phy/at803x.c
-+++ b/drivers/net/phy/at803x.c
-@@ -44,6 +44,7 @@
- #define AT803X_FUNC_DATA 0x4003
- #define AT803X_REG_CHIP_CONFIG 0x1f
- #define AT803X_BT_BX_REG_SEL 0x8000
-+#define AT803X_SGMII_ANEG_EN 0x1000
-
- #define AT803X_DEBUG_ADDR 0x1D
- #define AT803X_DEBUG_DATA 0x1E
-@@ -252,6 +253,27 @@ static int at803x_probe(struct phy_devic
- static int at803x_config_init(struct phy_device *phydev)
- {
- int ret;
-+ u32 v;
-+
-+ if (phydev->drv->phy_id == ATH8031_PHY_ID &&
-+ phydev->interface == PHY_INTERFACE_MODE_SGMII)
-+ {
-+ v = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
-+ /* select SGMII/fiber page */
-+ ret = phy_write(phydev, AT803X_REG_CHIP_CONFIG,
-+ v & ~AT803X_BT_BX_REG_SEL);
-+ if (ret)
-+ return ret;
-+ /* enable SGMII autonegotiation */
-+ ret = phy_write(phydev, MII_BMCR, AT803X_SGMII_ANEG_EN);
-+ if (ret)
-+ return ret;
-+ /* select copper page */
-+ ret = phy_write(phydev, AT803X_REG_CHIP_CONFIG,
-+ v | AT803X_BT_BX_REG_SEL);
-+ if (ret)
-+ return ret;
-+ }
-
- ret = genphy_config_init(phydev);
- if (ret < 0)
+++ /dev/null
-From 283b211aa01bdae94dffb3121655dbb20bf237f4 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Tue, 3 Dec 2019 15:22:05 +0000
-Subject: net: sfp: avoid tx-fault with Nokia GPON module
-
-The Nokia GPON module can hold tx-fault active while it is initialising
-which can take up to 60s. Avoid this causing the module to be declared
-faulty after the SFP MSA defined non-cooled module timeout.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 42 ++++++++++++++++++++++++++++++------------
- 1 file changed, 30 insertions(+), 12 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -153,10 +153,20 @@ static const enum gpiod_flags gpio_flags
- GPIOD_ASIS,
- };
-
--#define T_WAIT msecs_to_jiffies(50)
--#define T_INIT_JIFFIES msecs_to_jiffies(300)
--#define T_RESET_US 10
--#define T_FAULT_RECOVER msecs_to_jiffies(1000)
-+/* t_start_up (SFF-8431) or t_init (SFF-8472) is the time required for a
-+ * non-cooled module to initialise its laser safety circuitry. We wait
-+ * an initial T_WAIT period before we check the tx fault to give any PHY
-+ * on board (for a copper SFP) time to initialise.
-+ */
-+#define T_WAIT msecs_to_jiffies(50)
-+#define T_START_UP msecs_to_jiffies(300)
-+#define T_START_UP_BAD_GPON msecs_to_jiffies(60000)
-+
-+/* t_reset is the time required to assert the TX_DISABLE signal to reset
-+ * an indicated TX_FAULT.
-+ */
-+#define T_RESET_US 10
-+#define T_FAULT_RECOVER msecs_to_jiffies(1000)
-
- /* SFP module presence detection is poor: the three MOD DEF signals are
- * the same length on the PCB, which means it's possible for MOD DEF 0 to
-@@ -216,6 +226,7 @@ struct sfp {
-
- struct sfp_eeprom_id id;
- unsigned int module_power_mW;
-+ unsigned int module_t_start_up;
-
- #if IS_ENABLED(CONFIG_HWMON)
- struct sfp_diag diag;
-@@ -1590,6 +1601,12 @@ static int sfp_sm_mod_probe(struct sfp *
- if (ret < 0)
- return ret;
-
-+ if (!memcmp(id.base.vendor_name, "ALCATELLUCENT ", 16) &&
-+ !memcmp(id.base.vendor_pn, "3FE46541AA ", 16))
-+ sfp->module_t_start_up = T_START_UP_BAD_GPON;
-+ else
-+ sfp->module_t_start_up = T_START_UP;
-+
- return 0;
- }
-
-@@ -1795,11 +1812,12 @@ static void sfp_sm_main(struct sfp *sfp,
- break;
-
- if (sfp->state & SFP_F_TX_FAULT) {
-- /* Wait t_init before indicating that the link is up,
-- * provided the current state indicates no TX_FAULT. If
-- * TX_FAULT clears before this time, that's fine too.
-+ /* Wait up to t_init (SFF-8472) or t_start_up (SFF-8431)
-+ * from the TX_DISABLE deassertion for the module to
-+ * initialise, which is indicated by TX_FAULT
-+ * deasserting.
- */
-- timeout = T_INIT_JIFFIES;
-+ timeout = sfp->module_t_start_up;
- if (timeout > T_WAIT)
- timeout -= T_WAIT;
- else
-@@ -1816,8 +1834,8 @@ static void sfp_sm_main(struct sfp *sfp,
-
- case SFP_S_INIT:
- if (event == SFP_E_TIMEOUT && sfp->state & SFP_F_TX_FAULT) {
-- /* TX_FAULT is still asserted after t_init, so assume
-- * there is a fault.
-+ /* TX_FAULT is still asserted after t_init or
-+ * or t_start_up, so assume there is a fault.
- */
- sfp_sm_fault(sfp, SFP_S_INIT_TX_FAULT,
- sfp->sm_retries == 5);
-@@ -1836,7 +1854,7 @@ static void sfp_sm_main(struct sfp *sfp,
- case SFP_S_INIT_TX_FAULT:
- if (event == SFP_E_TIMEOUT) {
- sfp_module_tx_fault_reset(sfp);
-- sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES);
-+ sfp_sm_next(sfp, SFP_S_INIT, sfp->module_t_start_up);
- }
- break;
-
-@@ -1860,7 +1878,7 @@ static void sfp_sm_main(struct sfp *sfp,
- case SFP_S_TX_FAULT:
- if (event == SFP_E_TIMEOUT) {
- sfp_module_tx_fault_reset(sfp);
-- sfp_sm_next(sfp, SFP_S_REINIT, T_INIT_JIFFIES);
-+ sfp_sm_next(sfp, SFP_S_REINIT, sfp->module_t_start_up);
- }
- break;
-
+++ /dev/null
-From 29cd215aaf6c2050c43e4de03aee436c16f90b96 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Thu, 21 Nov 2019 17:27:14 +0000
-Subject: [PATCH 643/660] net: sfp: remove incomplete 100BASE-FX and 100BASE-LX
- support
-
-The 100BASE-FX and 100BASE-LX support assumes a PHY is present; this
-is probably an incorrect assumption. In any case, sfp_parse_support()
-will fail such a module. Let's stop pretending we support these
-modules.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp-bus.c | 4 +---
- drivers/net/phy/sfp.c | 13 +------------
- 2 files changed, 2 insertions(+), 15 deletions(-)
-
---- a/drivers/net/phy/sfp-bus.c
-+++ b/drivers/net/phy/sfp-bus.c
-@@ -341,9 +341,7 @@ phy_interface_t sfp_select_interface(str
- if (phylink_test(link_modes, 2500baseX_Full))
- return PHY_INTERFACE_MODE_2500BASEX;
-
-- if (id->base.e1000_base_t ||
-- id->base.e100_base_lx ||
-- id->base.e100_base_fx)
-+ if (id->base.e1000_base_t)
- return PHY_INTERFACE_MODE_SGMII;
-
- if (phylink_test(link_modes, 1000baseX_Full))
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -1424,18 +1424,7 @@ static void sfp_sm_fault(struct sfp *sfp
-
- static void sfp_sm_probe_for_phy(struct sfp *sfp)
- {
-- /* Setting the serdes link mode is guesswork: there's no
-- * field in the EEPROM which indicates what mode should
-- * be used.
-- *
-- * If it's a gigabit-only fiber module, it probably does
-- * not have a PHY, so switch to 802.3z negotiation mode.
-- * Otherwise, switch to SGMII mode (which is required to
-- * support non-gigabit speeds) and probe for a PHY.
-- */
-- if (sfp->id.base.e1000_base_t ||
-- sfp->id.base.e100_base_lx ||
-- sfp->id.base.e100_base_fx)
-+ if (sfp->id.base.e1000_base_t)
- sfp_sm_probe_phy(sfp);
- }
-
+++ /dev/null
-From dc45d9e04572b5cd6d32f51cdf9f62b18022e6dd Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Thu, 21 Nov 2019 17:32:59 +0000
-Subject: [PATCH 644/660] net: sfp: derive interface mode from ethtool link
- modes
-
-We don't need the EEPROM ID to derive the phy interface mode as we can
-derive it merely from the ethtool link modes. Remove the EEPROM ID
-argument to sfp_select_interface().
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/marvell10g.c | 2 +-
- drivers/net/phy/phylink.c | 2 +-
- drivers/net/phy/sfp-bus.c | 11 ++++-------
- include/linux/sfp.h | 2 --
- 4 files changed, 6 insertions(+), 11 deletions(-)
-
---- a/drivers/net/phy/marvell10g.c
-+++ b/drivers/net/phy/marvell10g.c
-@@ -227,7 +227,7 @@ static int mv3310_sfp_insert(void *upstr
- phy_interface_t iface;
-
- sfp_parse_support(phydev->sfp_bus, id, support);
-- iface = sfp_select_interface(phydev->sfp_bus, id, support);
-+ iface = sfp_select_interface(phydev->sfp_bus, support);
-
- if (iface != PHY_INTERFACE_MODE_10GKR) {
- dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n");
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -1663,7 +1663,7 @@ static int phylink_sfp_module_insert(voi
-
- linkmode_copy(support1, support);
-
-- iface = sfp_select_interface(pl->sfp_bus, id, config.advertising);
-+ iface = sfp_select_interface(pl->sfp_bus, config.advertising);
- if (iface == PHY_INTERFACE_MODE_NA) {
- netdev_err(pl->netdev,
- "selection of interface failed, advertisement %*pb\n",
---- a/drivers/net/phy/sfp-bus.c
-+++ b/drivers/net/phy/sfp-bus.c
-@@ -319,16 +319,12 @@ EXPORT_SYMBOL_GPL(sfp_parse_support);
- /**
- * sfp_select_interface() - Select appropriate phy_interface_t mode
- * @bus: a pointer to the &struct sfp_bus structure for the sfp module
-- * @id: a pointer to the module's &struct sfp_eeprom_id
- * @link_modes: ethtool link modes mask
- *
-- * Derive the phy_interface_t mode for the information found in the
-- * module's identifying EEPROM and the link modes mask. There is no
-- * standard or defined way to derive this information, so we decide
-- * based upon the link mode mask.
-+ * Derive the phy_interface_t mode for the SFP module from the link
-+ * modes mask.
- */
- phy_interface_t sfp_select_interface(struct sfp_bus *bus,
-- const struct sfp_eeprom_id *id,
- unsigned long *link_modes)
- {
- if (phylink_test(link_modes, 10000baseCR_Full) ||
-@@ -341,7 +337,8 @@ phy_interface_t sfp_select_interface(str
- if (phylink_test(link_modes, 2500baseX_Full))
- return PHY_INTERFACE_MODE_2500BASEX;
-
-- if (id->base.e1000_base_t)
-+ if (phylink_test(link_modes, 1000baseT_Half) ||
-+ phylink_test(link_modes, 1000baseT_Full))
- return PHY_INTERFACE_MODE_SGMII;
-
- if (phylink_test(link_modes, 1000baseX_Full))
---- a/include/linux/sfp.h
-+++ b/include/linux/sfp.h
-@@ -504,7 +504,6 @@ int sfp_parse_port(struct sfp_bus *bus,
- void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
- unsigned long *support);
- phy_interface_t sfp_select_interface(struct sfp_bus *bus,
-- const struct sfp_eeprom_id *id,
- unsigned long *link_modes);
-
- int sfp_get_module_info(struct sfp_bus *bus, struct ethtool_modinfo *modinfo);
-@@ -532,7 +531,6 @@ static inline void sfp_parse_support(str
- }
-
- static inline phy_interface_t sfp_select_interface(struct sfp_bus *bus,
-- const struct sfp_eeprom_id *id,
- unsigned long *link_modes)
- {
- return PHY_INTERFACE_MODE_NA;
+++ /dev/null
-From c66a4e76c8554c84e64b9315314576ac403c6641 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Thu, 26 Sep 2019 15:14:18 +0100
-Subject: [PATCH 645/660] net: sfp: add more extended compliance codes
-
-SFF-8024 is used to define various constants re-used in several SFF
-SFP-related specifications. Split these constants from the enum, and
-rename them to indicate that they're defined by SFF-8024.
-
-Add and use updated SFF-8024 extended compliance code definitions for
-10GBASE-T, 5GBASE-T and 2.5GBASE-T modules.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp-bus.c | 60 ++++++++++++++++------------
- drivers/net/phy/sfp.c | 4 +-
- include/linux/sfp.h | 82 ++++++++++++++++++++++++++-------------
- 3 files changed, 93 insertions(+), 53 deletions(-)
-
---- a/drivers/net/phy/sfp-bus.c
-+++ b/drivers/net/phy/sfp-bus.c
-@@ -123,35 +123,35 @@ int sfp_parse_port(struct sfp_bus *bus,
-
- /* port is the physical connector, set this from the connector field. */
- switch (id->base.connector) {
-- case SFP_CONNECTOR_SC:
-- case SFP_CONNECTOR_FIBERJACK:
-- case SFP_CONNECTOR_LC:
-- case SFP_CONNECTOR_MT_RJ:
-- case SFP_CONNECTOR_MU:
-- case SFP_CONNECTOR_OPTICAL_PIGTAIL:
-+ case SFF8024_CONNECTOR_SC:
-+ case SFF8024_CONNECTOR_FIBERJACK:
-+ case SFF8024_CONNECTOR_LC:
-+ case SFF8024_CONNECTOR_MT_RJ:
-+ case SFF8024_CONNECTOR_MU:
-+ case SFF8024_CONNECTOR_OPTICAL_PIGTAIL:
-+ case SFF8024_CONNECTOR_MPO_1X12:
-+ case SFF8024_CONNECTOR_MPO_2X16:
- port = PORT_FIBRE;
- break;
-
-- case SFP_CONNECTOR_RJ45:
-+ case SFF8024_CONNECTOR_RJ45:
- port = PORT_TP;
- break;
-
-- case SFP_CONNECTOR_COPPER_PIGTAIL:
-+ case SFF8024_CONNECTOR_COPPER_PIGTAIL:
- port = PORT_DA;
- break;
-
-- case SFP_CONNECTOR_UNSPEC:
-+ case SFF8024_CONNECTOR_UNSPEC:
- if (id->base.e1000_base_t) {
- port = PORT_TP;
- break;
- }
- /* fallthrough */
-- case SFP_CONNECTOR_SG: /* guess */
-- case SFP_CONNECTOR_MPO_1X12:
-- case SFP_CONNECTOR_MPO_2X16:
-- case SFP_CONNECTOR_HSSDC_II:
-- case SFP_CONNECTOR_NOSEPARATE:
-- case SFP_CONNECTOR_MXC_2X16:
-+ case SFF8024_CONNECTOR_SG: /* guess */
-+ case SFF8024_CONNECTOR_HSSDC_II:
-+ case SFF8024_CONNECTOR_NOSEPARATE:
-+ case SFF8024_CONNECTOR_MXC_2X16:
- port = PORT_OTHER;
- break;
- default:
-@@ -260,22 +260,33 @@ void sfp_parse_support(struct sfp_bus *b
- }
-
- switch (id->base.extended_cc) {
-- case 0x00: /* Unspecified */
-+ case SFF8024_ECC_UNSPEC:
- break;
-- case 0x02: /* 100Gbase-SR4 or 25Gbase-SR */
-+ case SFF8024_ECC_100GBASE_SR4_25GBASE_SR:
- phylink_set(modes, 100000baseSR4_Full);
- phylink_set(modes, 25000baseSR_Full);
- break;
-- case 0x03: /* 100Gbase-LR4 or 25Gbase-LR */
-- case 0x04: /* 100Gbase-ER4 or 25Gbase-ER */
-+ case SFF8024_ECC_100GBASE_LR4_25GBASE_LR:
-+ case SFF8024_ECC_100GBASE_ER4_25GBASE_ER:
- phylink_set(modes, 100000baseLR4_ER4_Full);
- break;
-- case 0x0b: /* 100Gbase-CR4 or 25Gbase-CR CA-L */
-- case 0x0c: /* 25Gbase-CR CA-S */
-- case 0x0d: /* 25Gbase-CR CA-N */
-+ case SFF8024_ECC_100GBASE_CR4:
- phylink_set(modes, 100000baseCR4_Full);
-+ /* fallthrough */
-+ case SFF8024_ECC_25GBASE_CR_S:
-+ case SFF8024_ECC_25GBASE_CR_N:
- phylink_set(modes, 25000baseCR_Full);
- break;
-+ case SFF8024_ECC_10GBASE_T_SFI:
-+ case SFF8024_ECC_10GBASE_T_SR:
-+ phylink_set(modes, 10000baseT_Full);
-+ break;
-+ case SFF8024_ECC_5GBASE_T:
-+ phylink_set(modes, 5000baseT_Full);
-+ break;
-+ case SFF8024_ECC_2_5GBASE_T:
-+ phylink_set(modes, 2500baseT_Full);
-+ break;
- default:
- dev_warn(bus->sfp_dev,
- "Unknown/unsupported extended compliance code: 0x%02x\n",
-@@ -300,7 +311,7 @@ void sfp_parse_support(struct sfp_bus *b
- */
- if (bitmap_empty(modes, __ETHTOOL_LINK_MODE_MASK_NBITS)) {
- /* If the encoding and bit rate allows 1000baseX */
-- if (id->base.encoding == SFP_ENCODING_8B10B && br_nom &&
-+ if (id->base.encoding == SFF8024_ENCODING_8B10B && br_nom &&
- br_min <= 1300 && br_max >= 1200)
- phylink_set(modes, 1000baseX_Full);
- }
-@@ -331,7 +342,8 @@ phy_interface_t sfp_select_interface(str
- phylink_test(link_modes, 10000baseSR_Full) ||
- phylink_test(link_modes, 10000baseLR_Full) ||
- phylink_test(link_modes, 10000baseLRM_Full) ||
-- phylink_test(link_modes, 10000baseER_Full))
-+ phylink_test(link_modes, 10000baseER_Full) ||
-+ phylink_test(link_modes, 10000baseT_Full))
- return PHY_INTERFACE_MODE_10GKR;
-
- if (phylink_test(link_modes, 2500baseX_Full))
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -240,7 +240,7 @@ struct sfp {
-
- static bool sff_module_supported(const struct sfp_eeprom_id *id)
- {
-- return id->base.phys_id == SFP_PHYS_ID_SFF &&
-+ return id->base.phys_id == SFF8024_ID_SFF_8472 &&
- id->base.phys_ext_id == SFP_PHYS_EXT_ID_SFP;
- }
-
-@@ -251,7 +251,7 @@ static const struct sff_data sff_data =
-
- static bool sfp_module_supported(const struct sfp_eeprom_id *id)
- {
-- return id->base.phys_id == SFP_PHYS_ID_SFP &&
-+ return id->base.phys_id == SFF8024_ID_SFP &&
- id->base.phys_ext_id == SFP_PHYS_EXT_ID_SFP;
- }
-
---- a/include/linux/sfp.h
-+++ b/include/linux/sfp.h
-@@ -275,6 +275,61 @@ struct sfp_diag {
- __be16 cal_v_offset;
- } __packed;
-
-+/* SFF8024 defined constants */
-+enum {
-+ SFF8024_ID_UNK = 0x00,
-+ SFF8024_ID_SFF_8472 = 0x02,
-+ SFF8024_ID_SFP = 0x03,
-+ SFF8024_ID_DWDM_SFP = 0x0b,
-+ SFF8024_ID_QSFP_8438 = 0x0c,
-+ SFF8024_ID_QSFP_8436_8636 = 0x0d,
-+ SFF8024_ID_QSFP28_8636 = 0x11,
-+
-+ SFF8024_ENCODING_UNSPEC = 0x00,
-+ SFF8024_ENCODING_8B10B = 0x01,
-+ SFF8024_ENCODING_4B5B = 0x02,
-+ SFF8024_ENCODING_NRZ = 0x03,
-+ SFF8024_ENCODING_8472_MANCHESTER= 0x04,
-+ SFF8024_ENCODING_8472_SONET = 0x05,
-+ SFF8024_ENCODING_8472_64B66B = 0x06,
-+ SFF8024_ENCODING_8436_MANCHESTER= 0x06,
-+ SFF8024_ENCODING_8436_SONET = 0x04,
-+ SFF8024_ENCODING_8436_64B66B = 0x05,
-+ SFF8024_ENCODING_256B257B = 0x07,
-+ SFF8024_ENCODING_PAM4 = 0x08,
-+
-+ SFF8024_CONNECTOR_UNSPEC = 0x00,
-+ /* codes 01-05 not supportable on SFP, but some modules have single SC */
-+ SFF8024_CONNECTOR_SC = 0x01,
-+ SFF8024_CONNECTOR_FIBERJACK = 0x06,
-+ SFF8024_CONNECTOR_LC = 0x07,
-+ SFF8024_CONNECTOR_MT_RJ = 0x08,
-+ SFF8024_CONNECTOR_MU = 0x09,
-+ SFF8024_CONNECTOR_SG = 0x0a,
-+ SFF8024_CONNECTOR_OPTICAL_PIGTAIL= 0x0b,
-+ SFF8024_CONNECTOR_MPO_1X12 = 0x0c,
-+ SFF8024_CONNECTOR_MPO_2X16 = 0x0d,
-+ SFF8024_CONNECTOR_HSSDC_II = 0x20,
-+ SFF8024_CONNECTOR_COPPER_PIGTAIL= 0x21,
-+ SFF8024_CONNECTOR_RJ45 = 0x22,
-+ SFF8024_CONNECTOR_NOSEPARATE = 0x23,
-+ SFF8024_CONNECTOR_MXC_2X16 = 0x24,
-+
-+ SFF8024_ECC_UNSPEC = 0x00,
-+ SFF8024_ECC_100G_25GAUI_C2M_AOC = 0x01,
-+ SFF8024_ECC_100GBASE_SR4_25GBASE_SR = 0x02,
-+ SFF8024_ECC_100GBASE_LR4_25GBASE_LR = 0x03,
-+ SFF8024_ECC_100GBASE_ER4_25GBASE_ER = 0x04,
-+ SFF8024_ECC_100GBASE_SR10 = 0x05,
-+ SFF8024_ECC_100GBASE_CR4 = 0x0b,
-+ SFF8024_ECC_25GBASE_CR_S = 0x0c,
-+ SFF8024_ECC_25GBASE_CR_N = 0x0d,
-+ SFF8024_ECC_10GBASE_T_SFI = 0x16,
-+ SFF8024_ECC_10GBASE_T_SR = 0x1c,
-+ SFF8024_ECC_5GBASE_T = 0x1d,
-+ SFF8024_ECC_2_5GBASE_T = 0x1e,
-+};
-+
- /* SFP EEPROM registers */
- enum {
- SFP_PHYS_ID = 0x00,
-@@ -309,34 +364,7 @@ enum {
- SFP_SFF8472_COMPLIANCE = 0x5e,
- SFP_CC_EXT = 0x5f,
-
-- SFP_PHYS_ID_SFF = 0x02,
-- SFP_PHYS_ID_SFP = 0x03,
- SFP_PHYS_EXT_ID_SFP = 0x04,
-- SFP_CONNECTOR_UNSPEC = 0x00,
-- /* codes 01-05 not supportable on SFP, but some modules have single SC */
-- SFP_CONNECTOR_SC = 0x01,
-- SFP_CONNECTOR_FIBERJACK = 0x06,
-- SFP_CONNECTOR_LC = 0x07,
-- SFP_CONNECTOR_MT_RJ = 0x08,
-- SFP_CONNECTOR_MU = 0x09,
-- SFP_CONNECTOR_SG = 0x0a,
-- SFP_CONNECTOR_OPTICAL_PIGTAIL = 0x0b,
-- SFP_CONNECTOR_MPO_1X12 = 0x0c,
-- SFP_CONNECTOR_MPO_2X16 = 0x0d,
-- SFP_CONNECTOR_HSSDC_II = 0x20,
-- SFP_CONNECTOR_COPPER_PIGTAIL = 0x21,
-- SFP_CONNECTOR_RJ45 = 0x22,
-- SFP_CONNECTOR_NOSEPARATE = 0x23,
-- SFP_CONNECTOR_MXC_2X16 = 0x24,
-- SFP_ENCODING_UNSPEC = 0x00,
-- SFP_ENCODING_8B10B = 0x01,
-- SFP_ENCODING_4B5B = 0x02,
-- SFP_ENCODING_NRZ = 0x03,
-- SFP_ENCODING_8472_MANCHESTER = 0x04,
-- SFP_ENCODING_8472_SONET = 0x05,
-- SFP_ENCODING_8472_64B66B = 0x06,
-- SFP_ENCODING_256B257B = 0x07,
-- SFP_ENCODING_PAM4 = 0x08,
- SFP_OPTIONS_HIGH_POWER_LEVEL = BIT(13),
- SFP_OPTIONS_PAGING_A2 = BIT(12),
- SFP_OPTIONS_RETIMER = BIT(11),
+++ /dev/null
-From f9a5a54b59cb904b37bf7409a43635ab195d0214 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Tue, 19 Nov 2019 10:13:25 +0000
-Subject: [PATCH 646/660] net: sfp: add module start/stop upstream
- notifications
-
-When dealing with some copper modules, we can't positively know the
-module capabilities are until we have probed the PHY. Without the full
-capabilities, we may end up failing a module that we could otherwise
-drive with a restricted set of capabilities.
-
-An example of this would be a module with a NBASE-T PHY plugged into
-a host that supports phy interface modes 2500BASE-X and SGMII. The
-PHY supports 10GBASE-R, 5000BASE-X, 2500BASE-X, SGMII interface modes,
-which means a subset of the capabilities are compatible with the host.
-
-However, reading the module EEPROM leads us to believe that the module
-only supports ethtool link mode 10GBASE-T, which is incompatible with
-the host - and thus results in the module being rejected.
-
-This patch adds an extra notification which are triggered after the
-SFP module's PHY probe, and a corresponding notification just before
-the PHY is removed.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp-bus.c | 21 +++++++++++++++++++++
- drivers/net/phy/sfp.c | 8 ++++++++
- drivers/net/phy/sfp.h | 2 ++
- include/linux/sfp.h | 4 ++++
- 4 files changed, 35 insertions(+)
-
---- a/drivers/net/phy/sfp-bus.c
-+++ b/drivers/net/phy/sfp-bus.c
-@@ -711,6 +711,27 @@ void sfp_module_remove(struct sfp_bus *b
- }
- EXPORT_SYMBOL_GPL(sfp_module_remove);
-
-+int sfp_module_start(struct sfp_bus *bus)
-+{
-+ const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus);
-+ int ret = 0;
-+
-+ if (ops && ops->module_start)
-+ ret = ops->module_start(bus->upstream);
-+
-+ return ret;
-+}
-+EXPORT_SYMBOL_GPL(sfp_module_start);
-+
-+void sfp_module_stop(struct sfp_bus *bus)
-+{
-+ const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus);
-+
-+ if (ops && ops->module_stop)
-+ ops->module_stop(bus->upstream);
-+}
-+EXPORT_SYMBOL_GPL(sfp_module_stop);
-+
- static void sfp_socket_clear(struct sfp_bus *bus)
- {
- bus->sfp_dev = NULL;
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -57,6 +57,7 @@ enum {
- SFP_DEV_UP,
-
- SFP_S_DOWN = 0,
-+ SFP_S_FAIL,
- SFP_S_WAIT,
- SFP_S_INIT,
- SFP_S_INIT_TX_FAULT,
-@@ -120,6 +121,7 @@ static const char *event_to_str(unsigned
-
- static const char * const sm_state_strings[] = {
- [SFP_S_DOWN] = "down",
-+ [SFP_S_FAIL] = "fail",
- [SFP_S_WAIT] = "wait",
- [SFP_S_INIT] = "init",
- [SFP_S_INIT_TX_FAULT] = "init_tx_fault",
-@@ -1766,6 +1768,8 @@ static void sfp_sm_main(struct sfp *sfp,
- if (sfp->sm_state == SFP_S_LINK_UP &&
- sfp->sm_dev_state == SFP_DEV_UP)
- sfp_sm_link_down(sfp);
-+ if (sfp->sm_state > SFP_S_INIT)
-+ sfp_module_stop(sfp->sfp_bus);
- if (sfp->mod_phy)
- sfp_sm_phy_detach(sfp);
- sfp_module_tx_disable(sfp);
-@@ -1833,6 +1837,10 @@ static void sfp_sm_main(struct sfp *sfp,
- * clear. Probe for the PHY and check the LOS state.
- */
- sfp_sm_probe_for_phy(sfp);
-+ if (sfp_module_start(sfp->sfp_bus)) {
-+ sfp_sm_next(sfp, SFP_S_FAIL, 0);
-+ break;
-+ }
- sfp_sm_link_check_los(sfp);
-
- /* Reset the fault retry count */
---- a/drivers/net/phy/sfp.h
-+++ b/drivers/net/phy/sfp.h
-@@ -22,6 +22,8 @@ void sfp_link_up(struct sfp_bus *bus);
- void sfp_link_down(struct sfp_bus *bus);
- int sfp_module_insert(struct sfp_bus *bus, const struct sfp_eeprom_id *id);
- void sfp_module_remove(struct sfp_bus *bus);
-+int sfp_module_start(struct sfp_bus *bus);
-+void sfp_module_stop(struct sfp_bus *bus);
- int sfp_link_configure(struct sfp_bus *bus, const struct sfp_eeprom_id *id);
- struct sfp_bus *sfp_register_socket(struct device *dev, struct sfp *sfp,
- const struct sfp_socket_ops *ops);
---- a/include/linux/sfp.h
-+++ b/include/linux/sfp.h
-@@ -507,6 +507,8 @@ struct sfp_bus;
- * @module_insert: called after a module has been detected to determine
- * whether the module is supported for the upstream device.
- * @module_remove: called after the module has been removed.
-+ * @module_start: called after the PHY probe step
-+ * @module_stop: called before the PHY is removed
- * @link_down: called when the link is non-operational for whatever
- * reason.
- * @link_up: called when the link is operational.
-@@ -520,6 +522,8 @@ struct sfp_upstream_ops {
- void (*detach)(void *priv, struct sfp_bus *bus);
- int (*module_insert)(void *priv, const struct sfp_eeprom_id *id);
- void (*module_remove)(void *priv);
-+ int (*module_start)(void *priv);
-+ void (*module_stop)(void *priv);
- void (*link_down)(void *priv);
- void (*link_up)(void *priv);
- int (*connect_phy)(void *priv, struct phy_device *);
+++ /dev/null
-From e2dc261b872a92a055eb2e86ac136baf9b20f2f2 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Thu, 21 Nov 2019 17:21:33 +0000
-Subject: [PATCH 647/660] net: sfp: move phy_start()/phy_stop() to phylink
-
-Move phy_start() and phy_stop() into the module_start and module_stop
-notifications in phylink, rather than having them in the SFP code.
-This gives phylink responsibility for controlling the PHY, rather
-than having SFP start and stop the PHY state machine.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/phylink.c | 22 ++++++++++++++++++++++
- drivers/net/phy/sfp.c | 2 --
- 2 files changed, 22 insertions(+), 2 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -1717,6 +1717,26 @@ static int phylink_sfp_module_insert(voi
- return ret;
- }
-
-+static int phylink_sfp_module_start(void *upstream)
-+{
-+ struct phylink *pl = upstream;
-+
-+ /* If this SFP module has a PHY, start the PHY now. */
-+ if (pl->phydev)
-+ phy_start(pl->phydev);
-+
-+ return 0;
-+}
-+
-+static void phylink_sfp_module_stop(void *upstream)
-+{
-+ struct phylink *pl = upstream;
-+
-+ /* If this SFP module has a PHY, stop it. */
-+ if (pl->phydev)
-+ phy_stop(pl->phydev);
-+}
-+
- static void phylink_sfp_link_down(void *upstream)
- {
- struct phylink *pl = upstream;
-@@ -1752,6 +1772,8 @@ static const struct sfp_upstream_ops sfp
- .attach = phylink_sfp_attach,
- .detach = phylink_sfp_detach,
- .module_insert = phylink_sfp_module_insert,
-+ .module_start = phylink_sfp_module_start,
-+ .module_stop = phylink_sfp_module_stop,
- .link_up = phylink_sfp_link_up,
- .link_down = phylink_sfp_link_down,
- .connect_phy = phylink_sfp_connect_phy,
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -1331,7 +1331,6 @@ static void sfp_sm_mod_next(struct sfp *
-
- static void sfp_sm_phy_detach(struct sfp *sfp)
- {
-- phy_stop(sfp->mod_phy);
- sfp_remove_phy(sfp->sfp_bus);
- phy_device_remove(sfp->mod_phy);
- phy_device_free(sfp->mod_phy);
-@@ -1362,7 +1361,6 @@ static void sfp_sm_probe_phy(struct sfp
- }
-
- sfp->mod_phy = phy;
-- phy_start(phy);
- }
-
- static void sfp_sm_link_up(struct sfp *sfp)
+++ /dev/null
-From c9de73988a35c6c85810a992954ac568cca503e5 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Wed, 2 Oct 2019 10:31:10 +0100
-Subject: [PATCH 648/660] net: mdio-i2c: add support for Clause 45 accesses
-
-Some SFP+ modules have PHYs on them just like SFP modules do, except
-they are Clause 45 PHYs. The I2C protocol used to access them is
-modified slightly in order to send the device address and 16-bit
-register index.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/mdio-i2c.c | 28 ++++++++++++++++++++--------
- 1 file changed, 20 insertions(+), 8 deletions(-)
-
---- a/drivers/net/phy/mdio-i2c.c
-+++ b/drivers/net/phy/mdio-i2c.c
-@@ -36,17 +36,24 @@ static int i2c_mii_read(struct mii_bus *
- {
- struct i2c_adapter *i2c = bus->priv;
- struct i2c_msg msgs[2];
-- u8 data[2], dev_addr = reg;
-+ u8 addr[3], data[2], *p;
- int bus_addr, ret;
-
- if (!i2c_mii_valid_phy_id(phy_id))
- return 0xffff;
-
-+ p = addr;
-+ if (reg & MII_ADDR_C45) {
-+ *p++ = 0x20 | ((reg >> 16) & 31);
-+ *p++ = reg >> 8;
-+ }
-+ *p++ = reg;
-+
- bus_addr = i2c_mii_phy_addr(phy_id);
- msgs[0].addr = bus_addr;
- msgs[0].flags = 0;
-- msgs[0].len = 1;
-- msgs[0].buf = &dev_addr;
-+ msgs[0].len = p - addr;
-+ msgs[0].buf = addr;
- msgs[1].addr = bus_addr;
- msgs[1].flags = I2C_M_RD;
- msgs[1].len = sizeof(data);
-@@ -64,18 +71,23 @@ static int i2c_mii_write(struct mii_bus
- struct i2c_adapter *i2c = bus->priv;
- struct i2c_msg msg;
- int ret;
-- u8 data[3];
-+ u8 data[5], *p;
-
- if (!i2c_mii_valid_phy_id(phy_id))
- return 0;
-
-- data[0] = reg;
-- data[1] = val >> 8;
-- data[2] = val;
-+ p = data;
-+ if (reg & MII_ADDR_C45) {
-+ *p++ = (reg >> 16) & 31;
-+ *p++ = reg >> 8;
-+ }
-+ *p++ = reg;
-+ *p++ = val >> 8;
-+ *p++ = val;
-
- msg.addr = i2c_mii_phy_addr(phy_id);
- msg.flags = 0;
-- msg.len = 3;
-+ msg.len = p - data;
- msg.buf = data;
-
- ret = i2c_transfer(i2c, &msg, 1);
+++ /dev/null
-From 0db7fba746b5608c30d4e2ba1c99a2a309e2d288 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 8 Nov 2019 15:22:48 +0000
-Subject: [PATCH 649/660] net: phylink: re-split __phylink_connect_phy()
-
-In order to support Clause 45 PHYs on SFP+ modules, which have an
-indeterminant phy interface mode, we need to be able to call
-phylink_bringup_phy() with a different interface mode to that used when
-binding the PHY. Reduce __phylink_connect_phy() to an attach operation,
-and move the call to phylink_bringup_phy() to its call sites.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/phylink.c | 39 ++++++++++++++++++++++++---------------
- 1 file changed, 24 insertions(+), 15 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -728,11 +728,9 @@ static int phylink_bringup_phy(struct ph
- return 0;
- }
-
--static int __phylink_connect_phy(struct phylink *pl, struct phy_device *phy,
-- phy_interface_t interface)
-+static int phylink_attach_phy(struct phylink *pl, struct phy_device *phy,
-+ phy_interface_t interface)
- {
-- int ret;
--
- if (WARN_ON(pl->link_an_mode == MLO_AN_FIXED ||
- (pl->link_an_mode == MLO_AN_INBAND &&
- phy_interface_mode_is_8023z(interface))))
-@@ -741,15 +739,7 @@ static int __phylink_connect_phy(struct
- if (pl->phydev)
- return -EBUSY;
-
-- ret = phy_attach_direct(pl->netdev, phy, 0, interface);
-- if (ret)
-- return ret;
--
-- ret = phylink_bringup_phy(pl, phy);
-- if (ret)
-- phy_detach(phy);
--
-- return ret;
-+ return phy_attach_direct(pl->netdev, phy, 0, interface);
- }
-
- /**
-@@ -769,13 +759,23 @@ static int __phylink_connect_phy(struct
- */
- int phylink_connect_phy(struct phylink *pl, struct phy_device *phy)
- {
-+ int ret;
-+
- /* Use PHY device/driver interface */
- if (pl->link_interface == PHY_INTERFACE_MODE_NA) {
- pl->link_interface = phy->interface;
- pl->link_config.interface = pl->link_interface;
- }
-
-- return __phylink_connect_phy(pl, phy, pl->link_interface);
-+ ret = phylink_attach_phy(pl, phy, pl->link_interface);
-+ if (ret < 0)
-+ return ret;
-+
-+ ret = phylink_bringup_phy(pl, phy);
-+ if (ret)
-+ phy_detach(phy);
-+
-+ return ret;
- }
- EXPORT_SYMBOL_GPL(phylink_connect_phy);
-
-@@ -1759,8 +1759,17 @@ static void phylink_sfp_link_up(void *up
- static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy)
- {
- struct phylink *pl = upstream;
-+ int ret;
-
-- return __phylink_connect_phy(upstream, phy, pl->link_config.interface);
-+ ret = phylink_attach_phy(pl, phy, pl->link_config.interface);
-+ if (ret < 0)
-+ return ret;
-+
-+ ret = phylink_bringup_phy(pl, phy);
-+ if (ret)
-+ phy_detach(phy);
-+
-+ return ret;
- }
-
- static void phylink_sfp_disconnect_phy(void *upstream)
+++ /dev/null
-From caf32f96f13df7d3ae6cb8bf8001c88ae22025ca Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 8 Nov 2019 15:28:22 +0000
-Subject: [PATCH 650/660] net: phylink: support Clause 45 PHYs on SFP+ modules
-
-Some SFP+ modules have Clause 45 PHYs embedded on them, which need a
-little more handling in order to ensure that they are correctly setup,
-as they switch the PHY link mode according to the negotiated speed.
-
-With Clause 22 PHYs, we assumed that they would operate in SGMII mode,
-but this assumption is now false. Adapt phylink to support Clause 45
-PHYs on SFP+ modules.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/phylink.c | 21 ++++++++++++++++-----
- 1 file changed, 16 insertions(+), 5 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -671,7 +671,8 @@ static void phylink_phy_change(struct ph
- phy_duplex_to_str(phydev->duplex));
- }
-
--static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy)
-+static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy,
-+ phy_interface_t interface)
- {
- struct phylink_link_state config;
- __ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
-@@ -691,7 +692,7 @@ static int phylink_bringup_phy(struct ph
- ethtool_convert_legacy_u32_to_link_mode(supported, phy->supported);
- ethtool_convert_legacy_u32_to_link_mode(config.advertising,
- phy->advertising);
-- config.interface = pl->link_config.interface;
-+ config.interface = interface;
-
- ret = phylink_validate(pl, supported, &config);
- if (ret)
-@@ -707,6 +708,7 @@ static int phylink_bringup_phy(struct ph
- mutex_lock(&phy->lock);
- mutex_lock(&pl->state_mutex);
- pl->phydev = phy;
-+ pl->phy_state.interface = interface;
- linkmode_copy(pl->supported, supported);
- linkmode_copy(pl->link_config.advertising, config.advertising);
-
-@@ -771,7 +773,7 @@ int phylink_connect_phy(struct phylink *
- if (ret < 0)
- return ret;
-
-- ret = phylink_bringup_phy(pl, phy);
-+ ret = phylink_bringup_phy(pl, phy, pl->link_config.interface);
- if (ret)
- phy_detach(phy);
-
-@@ -824,7 +826,7 @@ int phylink_of_phy_connect(struct phylin
- if (!phy_dev)
- return -ENODEV;
-
-- ret = phylink_bringup_phy(pl, phy_dev);
-+ ret = phylink_bringup_phy(pl, phy_dev, pl->link_config.interface);
- if (ret)
- phy_detach(phy_dev);
-
-@@ -1759,13 +1761,22 @@ static void phylink_sfp_link_up(void *up
- static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy)
- {
- struct phylink *pl = upstream;
-+ phy_interface_t interface = pl->link_config.interface;
- int ret;
-
- ret = phylink_attach_phy(pl, phy, pl->link_config.interface);
- if (ret < 0)
- return ret;
-
-- ret = phylink_bringup_phy(pl, phy);
-+ /* Clause 45 PHYs switch their Serdes lane between several different
-+ * modes, normally 10GBASE-R, SGMII. Some use 2500BASE-X for 2.5G
-+ * speeds. We really need to know which interface modes the PHY and
-+ * MAC supports to properly work out which linkmodes can be supported.
-+ */
-+ if (phy->is_c45)
-+ interface = PHY_INTERFACE_MODE_NA;
-+
-+ ret = phylink_bringup_phy(pl, phy, interface);
- if (ret)
- phy_detach(phy);
-
+++ /dev/null
-From d1339d6956f0255b6ce2412328a98945be8cc3ca Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Sat, 16 Nov 2019 11:30:18 +0000
-Subject: [PATCH 651/660] net: phylink: split link_an_mode configured and
- current settings
-
-Split link_an_mode between the configured setting and the current
-operating setting. This is an important distinction to make when we
-need to configure PHY mode for a plugged SFP+ module that does not
-use in-band signalling.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/phylink.c | 59 ++++++++++++++++++++-------------------
- 1 file changed, 31 insertions(+), 28 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -48,7 +48,8 @@ struct phylink {
- unsigned long phylink_disable_state; /* bitmask of disables */
- struct phy_device *phydev;
- phy_interface_t link_interface; /* PHY_INTERFACE_xxx */
-- u8 link_an_mode; /* MLO_AN_xxx */
-+ u8 cfg_link_an_mode; /* MLO_AN_xxx */
-+ u8 cur_link_an_mode;
- u8 link_port; /* The current non-phy ethtool port */
- __ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
-
-@@ -253,12 +254,12 @@ static int phylink_parse_mode(struct phy
-
- dn = fwnode_get_named_child_node(fwnode, "fixed-link");
- if (dn || fwnode_property_present(fwnode, "fixed-link"))
-- pl->link_an_mode = MLO_AN_FIXED;
-+ pl->cfg_link_an_mode = MLO_AN_FIXED;
- fwnode_handle_put(dn);
-
- if (fwnode_property_read_string(fwnode, "managed", &managed) == 0 &&
- strcmp(managed, "in-band-status") == 0) {
-- if (pl->link_an_mode == MLO_AN_FIXED) {
-+ if (pl->cfg_link_an_mode == MLO_AN_FIXED) {
- netdev_err(pl->netdev,
- "can't use both fixed-link and in-band-status\n");
- return -EINVAL;
-@@ -270,7 +271,7 @@ static int phylink_parse_mode(struct phy
- phylink_set(pl->supported, Asym_Pause);
- phylink_set(pl->supported, Pause);
- pl->link_config.an_enabled = true;
-- pl->link_an_mode = MLO_AN_INBAND;
-+ pl->cfg_link_an_mode = MLO_AN_INBAND;
-
- switch (pl->link_config.interface) {
- case PHY_INTERFACE_MODE_SGMII:
-@@ -330,14 +331,14 @@ static void phylink_mac_config(struct ph
- {
- netdev_dbg(pl->netdev,
- "%s: mode=%s/%s/%s/%s adv=%*pb pause=%02x link=%u an=%u\n",
-- __func__, phylink_an_mode_str(pl->link_an_mode),
-+ __func__, phylink_an_mode_str(pl->cur_link_an_mode),
- phy_modes(state->interface),
- phy_speed_to_str(state->speed),
- phy_duplex_to_str(state->duplex),
- __ETHTOOL_LINK_MODE_MASK_NBITS, state->advertising,
- state->pause, state->link, state->an_enabled);
-
-- pl->ops->mac_config(pl->netdev, pl->link_an_mode, state);
-+ pl->ops->mac_config(pl->netdev, pl->cur_link_an_mode, state);
- }
-
- static void phylink_mac_config_up(struct phylink *pl,
-@@ -446,7 +447,7 @@ static void phylink_resolve(struct work_
- } else if (pl->mac_link_dropped) {
- link_state.link = false;
- } else {
-- switch (pl->link_an_mode) {
-+ switch (pl->cur_link_an_mode) {
- case MLO_AN_PHY:
- link_state = pl->phy_state;
- phylink_resolve_flow(pl, &link_state);
-@@ -483,12 +484,12 @@ static void phylink_resolve(struct work_
- if (link_state.link != netif_carrier_ok(ndev)) {
- if (!link_state.link) {
- netif_carrier_off(ndev);
-- pl->ops->mac_link_down(ndev, pl->link_an_mode,
-+ pl->ops->mac_link_down(ndev, pl->cur_link_an_mode,
- pl->cur_interface);
- netdev_info(ndev, "Link is Down\n");
- } else {
- pl->cur_interface = link_state.interface;
-- pl->ops->mac_link_up(ndev, pl->link_an_mode,
-+ pl->ops->mac_link_up(ndev, pl->cur_link_an_mode,
- pl->cur_interface, pl->phydev);
-
- netif_carrier_on(ndev);
-@@ -610,7 +611,7 @@ struct phylink *phylink_create(struct ne
- return ERR_PTR(ret);
- }
-
-- if (pl->link_an_mode == MLO_AN_FIXED) {
-+ if (pl->cfg_link_an_mode == MLO_AN_FIXED) {
- ret = phylink_parse_fixedlink(pl, fwnode);
- if (ret < 0) {
- kfree(pl);
-@@ -618,6 +619,8 @@ struct phylink *phylink_create(struct ne
- }
- }
-
-+ pl->cur_link_an_mode = pl->cfg_link_an_mode;
-+
- ret = phylink_register_sfp(pl, fwnode);
- if (ret < 0) {
- kfree(pl);
-@@ -733,8 +736,8 @@ static int phylink_bringup_phy(struct ph
- static int phylink_attach_phy(struct phylink *pl, struct phy_device *phy,
- phy_interface_t interface)
- {
-- if (WARN_ON(pl->link_an_mode == MLO_AN_FIXED ||
-- (pl->link_an_mode == MLO_AN_INBAND &&
-+ if (WARN_ON(pl->cfg_link_an_mode == MLO_AN_FIXED ||
-+ (pl->cfg_link_an_mode == MLO_AN_INBAND &&
- phy_interface_mode_is_8023z(interface))))
- return -EINVAL;
-
-@@ -801,8 +804,8 @@ int phylink_of_phy_connect(struct phylin
- int ret;
-
- /* Fixed links and 802.3z are handled without needing a PHY */
-- if (pl->link_an_mode == MLO_AN_FIXED ||
-- (pl->link_an_mode == MLO_AN_INBAND &&
-+ if (pl->cfg_link_an_mode == MLO_AN_FIXED ||
-+ (pl->cfg_link_an_mode == MLO_AN_INBAND &&
- phy_interface_mode_is_8023z(pl->link_interface)))
- return 0;
-
-@@ -813,7 +816,7 @@ int phylink_of_phy_connect(struct phylin
- phy_node = of_parse_phandle(dn, "phy-device", 0);
-
- if (!phy_node) {
-- if (pl->link_an_mode == MLO_AN_PHY)
-+ if (pl->cfg_link_an_mode == MLO_AN_PHY)
- return -ENODEV;
- return 0;
- }
-@@ -876,7 +879,7 @@ int phylink_fixed_state_cb(struct phylin
- /* It does not make sense to let the link be overriden unless we use
- * MLO_AN_FIXED
- */
-- if (pl->link_an_mode != MLO_AN_FIXED)
-+ if (pl->cfg_link_an_mode != MLO_AN_FIXED)
- return -EINVAL;
-
- mutex_lock(&pl->state_mutex);
-@@ -926,7 +929,7 @@ void phylink_start(struct phylink *pl)
- ASSERT_RTNL();
-
- netdev_info(pl->netdev, "configuring for %s/%s link mode\n",
-- phylink_an_mode_str(pl->link_an_mode),
-+ phylink_an_mode_str(pl->cur_link_an_mode),
- phy_modes(pl->link_config.interface));
-
- /* Always set the carrier off */
-@@ -948,7 +951,7 @@ void phylink_start(struct phylink *pl)
- clear_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
- phylink_run_resolve(pl);
-
-- if (pl->link_an_mode == MLO_AN_FIXED && pl->link_gpio) {
-+ if (pl->cfg_link_an_mode == MLO_AN_FIXED && pl->link_gpio) {
- int irq = gpiod_to_irq(pl->link_gpio);
-
- if (irq > 0) {
-@@ -963,7 +966,7 @@ void phylink_start(struct phylink *pl)
- if (irq <= 0)
- mod_timer(&pl->link_poll, jiffies + HZ);
- }
-- if (pl->link_an_mode == MLO_AN_FIXED && pl->get_fixed_state)
-+ if (pl->cfg_link_an_mode == MLO_AN_FIXED && pl->get_fixed_state)
- mod_timer(&pl->link_poll, jiffies + HZ);
- if (pl->phydev)
- phy_start(pl->phydev);
-@@ -1090,7 +1093,7 @@ int phylink_ethtool_ksettings_get(struct
-
- linkmode_copy(kset->link_modes.supported, pl->supported);
-
-- switch (pl->link_an_mode) {
-+ switch (pl->cur_link_an_mode) {
- case MLO_AN_FIXED:
- /* We are using fixed settings. Report these as the
- * current link settings - and note that these also
-@@ -1163,7 +1166,7 @@ int phylink_ethtool_ksettings_set(struct
- /* If we have a fixed link (as specified by firmware), refuse
- * to change link parameters.
- */
-- if (pl->link_an_mode == MLO_AN_FIXED &&
-+ if (pl->cur_link_an_mode == MLO_AN_FIXED &&
- (s->speed != pl->link_config.speed ||
- s->duplex != pl->link_config.duplex))
- return -EINVAL;
-@@ -1175,7 +1178,7 @@ int phylink_ethtool_ksettings_set(struct
- __clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, config.advertising);
- } else {
- /* If we have a fixed link, refuse to enable autonegotiation */
-- if (pl->link_an_mode == MLO_AN_FIXED)
-+ if (pl->cur_link_an_mode == MLO_AN_FIXED)
- return -EINVAL;
-
- config.speed = SPEED_UNKNOWN;
-@@ -1217,7 +1220,7 @@ int phylink_ethtool_ksettings_set(struct
- * configuration. For a fixed link, this isn't able to change any
- * parameters, which just leaves inband mode.
- */
-- if (pl->link_an_mode == MLO_AN_INBAND &&
-+ if (pl->cur_link_an_mode == MLO_AN_INBAND &&
- !test_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state)) {
- phylink_mac_config(pl, &pl->link_config);
- phylink_mac_an_restart(pl);
-@@ -1307,7 +1310,7 @@ int phylink_ethtool_set_pauseparam(struc
- pause->tx_pause);
- } else if (!test_bit(PHYLINK_DISABLE_STOPPED,
- &pl->phylink_disable_state)) {
-- switch (pl->link_an_mode) {
-+ switch (pl->cur_link_an_mode) {
- case MLO_AN_FIXED:
- /* Should we allow fixed links to change against the config? */
- phylink_resolve_flow(pl, config);
-@@ -1496,7 +1499,7 @@ static int phylink_mii_read(struct phyli
- struct phylink_link_state state;
- int val = 0xffff;
-
-- switch (pl->link_an_mode) {
-+ switch (pl->cur_link_an_mode) {
- case MLO_AN_FIXED:
- if (phy_id == 0) {
- phylink_get_fixed_state(pl, &state);
-@@ -1524,7 +1527,7 @@ static int phylink_mii_read(struct phyli
- static int phylink_mii_write(struct phylink *pl, unsigned int phy_id,
- unsigned int reg, unsigned int val)
- {
-- switch (pl->link_an_mode) {
-+ switch (pl->cur_link_an_mode) {
- case MLO_AN_FIXED:
- break;
-
-@@ -1698,10 +1701,10 @@ static int phylink_sfp_module_insert(voi
- linkmode_copy(pl->link_config.advertising, config.advertising);
- }
-
-- if (pl->link_an_mode != MLO_AN_INBAND ||
-+ if (pl->cur_link_an_mode != MLO_AN_INBAND ||
- pl->link_config.interface != config.interface) {
- pl->link_config.interface = config.interface;
-- pl->link_an_mode = MLO_AN_INBAND;
-+ pl->cur_link_an_mode = MLO_AN_INBAND;
-
- changed = true;
-
+++ /dev/null
-From 36569971241ae6b81376da4937d2c8760122d10b Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Thu, 21 Nov 2019 17:58:58 +0000
-Subject: [PATCH 652/660] net: phylink: split phylink_sfp_module_insert()
-
-Split out the configuration step from phylink_sfp_module_insert() so
-we can re-use this later.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/phylink.c | 47 +++++++++++++++++++++++----------------
- 1 file changed, 28 insertions(+), 19 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -1633,25 +1633,21 @@ static void phylink_sfp_detach(void *ups
- pl->netdev->sfp_bus = NULL;
- }
-
--static int phylink_sfp_module_insert(void *upstream,
-- const struct sfp_eeprom_id *id)
-+static int phylink_sfp_config(struct phylink *pl, u8 mode, u8 port,
-+ const unsigned long *supported,
-+ const unsigned long *advertising)
- {
-- struct phylink *pl = upstream;
-- __ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, };
- __ETHTOOL_DECLARE_LINK_MODE_MASK(support1);
-+ __ETHTOOL_DECLARE_LINK_MODE_MASK(support);
- struct phylink_link_state config;
- phy_interface_t iface;
-- int ret = 0;
- bool changed;
-- u8 port;
-+ int ret;
-
-- ASSERT_RTNL();
--
-- sfp_parse_support(pl->sfp_bus, id, support);
-- port = sfp_parse_port(pl->sfp_bus, id, support);
-+ linkmode_copy(support, supported);
-
- memset(&config, 0, sizeof(config));
-- linkmode_copy(config.advertising, support);
-+ linkmode_copy(config.advertising, advertising);
- config.interface = PHY_INTERFACE_MODE_NA;
- config.speed = SPEED_UNKNOWN;
- config.duplex = DUPLEX_UNKNOWN;
-@@ -1666,8 +1662,6 @@ static int phylink_sfp_module_insert(voi
- return ret;
- }
-
-- linkmode_copy(support1, support);
--
- iface = sfp_select_interface(pl->sfp_bus, config.advertising);
- if (iface == PHY_INTERFACE_MODE_NA) {
- netdev_err(pl->netdev,
-@@ -1677,18 +1671,18 @@ static int phylink_sfp_module_insert(voi
- }
-
- config.interface = iface;
-+ linkmode_copy(support1, support);
- ret = phylink_validate(pl, support1, &config);
- if (ret) {
- netdev_err(pl->netdev, "validation of %s/%s with support %*pb failed: %d\n",
-- phylink_an_mode_str(MLO_AN_INBAND),
-+ phylink_an_mode_str(mode),
- phy_modes(config.interface),
- __ETHTOOL_LINK_MODE_MASK_NBITS, support, ret);
- return ret;
- }
-
- netdev_dbg(pl->netdev, "requesting link mode %s/%s with support %*pb\n",
-- phylink_an_mode_str(MLO_AN_INBAND),
-- phy_modes(config.interface),
-+ phylink_an_mode_str(mode), phy_modes(config.interface),
- __ETHTOOL_LINK_MODE_MASK_NBITS, support);
-
- if (phy_interface_mode_is_8023z(iface) && pl->phydev)
-@@ -1701,15 +1695,15 @@ static int phylink_sfp_module_insert(voi
- linkmode_copy(pl->link_config.advertising, config.advertising);
- }
-
-- if (pl->cur_link_an_mode != MLO_AN_INBAND ||
-+ if (pl->cur_link_an_mode != mode ||
- pl->link_config.interface != config.interface) {
- pl->link_config.interface = config.interface;
-- pl->cur_link_an_mode = MLO_AN_INBAND;
-+ pl->cur_link_an_mode = mode;
-
- changed = true;
-
- netdev_info(pl->netdev, "switched to %s/%s link mode\n",
-- phylink_an_mode_str(MLO_AN_INBAND),
-+ phylink_an_mode_str(mode),
- phy_modes(config.interface));
- }
-
-@@ -1722,6 +1716,21 @@ static int phylink_sfp_module_insert(voi
- return ret;
- }
-
-+static int phylink_sfp_module_insert(void *upstream,
-+ const struct sfp_eeprom_id *id)
-+{
-+ struct phylink *pl = upstream;
-+ __ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, };
-+ u8 port;
-+
-+ ASSERT_RTNL();
-+
-+ sfp_parse_support(pl->sfp_bus, id, support);
-+ port = sfp_parse_port(pl->sfp_bus, id, support);
-+
-+ return phylink_sfp_config(pl, MLO_AN_INBAND, port, support, support);
-+}
-+
- static int phylink_sfp_module_start(void *upstream)
- {
- struct phylink *pl = upstream;
+++ /dev/null
-From eb514428f75bc67d12ff019c44a8f8ca9f33c54c Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Thu, 21 Nov 2019 17:42:49 +0000
-Subject: [PATCH 653/660] net: phylink: delay MAC configuration for copper SFP
- modules
-
-Knowing whether we need to delay the MAC configuration because a module
-may have a PHY is useful to phylink to allow NBASE-T modules to work on
-systems supporting no more than 2.5G speeds.
-
-This commit allows us to delay such configuration until after the PHY
-has been probed by recording the parsed capabilities, and if the module
-may have a PHY, doing no more until the module_start() notification is
-called. At that point, we either have a PHY, or we don't.
-
-We move the PHY-based setup a little later, and use the PHYs support
-capabilities rather than the EEPROM parsed capabilities to determine
-whether we can support the PHY.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/phylink.c | 59 +++++++++++++++++++++++++++++++--------
- drivers/net/phy/sfp-bus.c | 28 +++++++++++++++++++
- include/linux/sfp.h | 7 +++++
- 3 files changed, 83 insertions(+), 11 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -72,6 +72,9 @@ struct phylink {
- bool mac_link_dropped;
-
- struct sfp_bus *sfp_bus;
-+ bool sfp_may_have_phy;
-+ __ETHTOOL_DECLARE_LINK_MODE_MASK(sfp_support);
-+ u8 sfp_port;
- };
-
- static inline void linkmode_zero(unsigned long *dst)
-@@ -1633,7 +1636,7 @@ static void phylink_sfp_detach(void *ups
- pl->netdev->sfp_bus = NULL;
- }
-
--static int phylink_sfp_config(struct phylink *pl, u8 mode, u8 port,
-+static int phylink_sfp_config(struct phylink *pl, u8 mode,
- const unsigned long *supported,
- const unsigned long *advertising)
- {
-@@ -1707,7 +1710,7 @@ static int phylink_sfp_config(struct phy
- phy_modes(config.interface));
- }
-
-- pl->link_port = port;
-+ pl->link_port = pl->sfp_port;
-
- if (changed && !test_bit(PHYLINK_DISABLE_STOPPED,
- &pl->phylink_disable_state))
-@@ -1720,15 +1723,20 @@ static int phylink_sfp_module_insert(voi
- const struct sfp_eeprom_id *id)
- {
- struct phylink *pl = upstream;
-- __ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, };
-- u8 port;
-+ unsigned long *support = pl->sfp_support;
-
- ASSERT_RTNL();
-
-+ linkmode_zero(support);
- sfp_parse_support(pl->sfp_bus, id, support);
-- port = sfp_parse_port(pl->sfp_bus, id, support);
-+ pl->sfp_port = sfp_parse_port(pl->sfp_bus, id, support);
-
-- return phylink_sfp_config(pl, MLO_AN_INBAND, port, support, support);
-+ /* If this module may have a PHY connecting later, defer until later */
-+ pl->sfp_may_have_phy = sfp_may_have_phy(pl->sfp_bus, id);
-+ if (pl->sfp_may_have_phy)
-+ return 0;
-+
-+ return phylink_sfp_config(pl, MLO_AN_INBAND, support, support);
- }
-
- static int phylink_sfp_module_start(void *upstream)
-@@ -1736,10 +1744,19 @@ static int phylink_sfp_module_start(void
- struct phylink *pl = upstream;
-
- /* If this SFP module has a PHY, start the PHY now. */
-- if (pl->phydev)
-+ if (pl->phydev) {
- phy_start(pl->phydev);
--
-- return 0;
-+ return 0;
-+ }
-+
-+ /* If the module may have a PHY but we didn't detect one we
-+ * need to configure the MAC here.
-+ */
-+ if (!pl->sfp_may_have_phy)
-+ return 0;
-+
-+ return phylink_sfp_config(pl, MLO_AN_INBAND,
-+ pl->sfp_support, pl->sfp_support);
- }
-
- static void phylink_sfp_module_stop(void *upstream)
-@@ -1773,10 +1790,30 @@ static void phylink_sfp_link_up(void *up
- static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy)
- {
- struct phylink *pl = upstream;
-- phy_interface_t interface = pl->link_config.interface;
-+ __ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
-+ __ETHTOOL_DECLARE_LINK_MODE_MASK(advertising);
-+ phy_interface_t interface;
- int ret;
-
-- ret = phylink_attach_phy(pl, phy, pl->link_config.interface);
-+ /*
-+ * This is the new way of dealing with flow control for PHYs,
-+ * as described by Timur Tabi in commit 529ed1275263 ("net: phy:
-+ * phy drivers should not set SUPPORTED_[Asym_]Pause") except
-+ * using our validate call to the MAC, we rely upon the MAC
-+ * clearing the bits from both supported and advertising fields.
-+ */
-+ phy_support_asym_pause(phy);
-+
-+ ethtool_convert_legacy_u32_to_link_mode(supported, phy->supported);
-+ ethtool_convert_legacy_u32_to_link_mode(advertising, phy->advertising);
-+
-+ /* Do the initial configuration */
-+ ret = phylink_sfp_config(pl, ML_AN_INBAND, supported, advertising);
-+ if (ret < 0)
-+ return ret;
-+
-+ interface = pl->link_config.interface;
-+ ret = phylink_attach_phy(pl, phy, interface);
- if (ret < 0)
- return ret;
-
---- a/drivers/net/phy/sfp-bus.c
-+++ b/drivers/net/phy/sfp-bus.c
-@@ -102,6 +102,7 @@ static const struct sfp_quirk *sfp_looku
-
- return NULL;
- }
-+
- /**
- * sfp_parse_port() - Parse the EEPROM base ID, setting the port type
- * @bus: a pointer to the &struct sfp_bus structure for the sfp module
-@@ -178,6 +179,33 @@ int sfp_parse_port(struct sfp_bus *bus,
- EXPORT_SYMBOL_GPL(sfp_parse_port);
-
- /**
-+ * sfp_may_have_phy() - indicate whether the module may have a PHY
-+ * @bus: a pointer to the &struct sfp_bus structure for the sfp module
-+ * @id: a pointer to the module's &struct sfp_eeprom_id
-+ *
-+ * Parse the EEPROM identification given in @id, and return whether
-+ * this module may have a PHY.
-+ */
-+bool sfp_may_have_phy(struct sfp_bus *bus, const struct sfp_eeprom_id *id)
-+{
-+ if (id->base.e1000_base_t)
-+ return true;
-+
-+ if (id->base.phys_id != SFF8024_ID_DWDM_SFP) {
-+ switch (id->base.extended_cc) {
-+ case SFF8024_ECC_10GBASE_T_SFI:
-+ case SFF8024_ECC_10GBASE_T_SR:
-+ case SFF8024_ECC_5GBASE_T:
-+ case SFF8024_ECC_2_5GBASE_T:
-+ return true;
-+ }
-+ }
-+
-+ return false;
-+}
-+EXPORT_SYMBOL_GPL(sfp_may_have_phy);
-+
-+/**
- * sfp_parse_support() - Parse the eeprom id for supported link modes
- * @bus: a pointer to the &struct sfp_bus structure for the sfp module
- * @id: a pointer to the module's &struct sfp_eeprom_id
---- a/include/linux/sfp.h
-+++ b/include/linux/sfp.h
-@@ -533,6 +533,7 @@ struct sfp_upstream_ops {
- #if IS_ENABLED(CONFIG_SFP)
- int sfp_parse_port(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
- unsigned long *support);
-+bool sfp_may_have_phy(struct sfp_bus *bus, const struct sfp_eeprom_id *id);
- void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
- unsigned long *support);
- phy_interface_t sfp_select_interface(struct sfp_bus *bus,
-@@ -556,6 +557,12 @@ static inline int sfp_parse_port(struct
- return PORT_OTHER;
- }
-
-+static inline bool sfp_may_have_phy(struct sfp_bus *bus,
-+ const struct sfp_eeprom_id *id)
-+{
-+ return false;
-+}
-+
- static inline void sfp_parse_support(struct sfp_bus *bus,
- const struct sfp_eeprom_id *id,
- unsigned long *support)
+++ /dev/null
-From 3d8592a23dd67fb78ad85ddf711a059d3880fcb4 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 8 Nov 2019 17:19:16 +0000
-Subject: [PATCH 654/660] net: phylink: make Broadcom BCM84881 based SFPs work
-
-The Broadcom BCM84881 does not appear to send the SGMII control word
-when operating in SGMII mode, which causes network adapters to fail
-to link with the PHY, or decide to operate at fixed 1G speed, even if
-the PHY negotiated 100M.
-
-Work around this by detecting the Broadcom BCM84881 and switch to phy
-mode rather than inband mode.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/phylink.c | 17 ++++++++++++++++-
- 1 file changed, 16 insertions(+), 1 deletion(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -1787,12 +1787,22 @@ static void phylink_sfp_link_up(void *up
- phylink_run_resolve(pl);
- }
-
-+/* The Broadcom BCM84881 in the Methode DM7052 is unable to provide a SGMII
-+ * or 802.3z control word, so inband will not work.
-+ */
-+static bool phylink_phy_no_inband(struct phy_device *phy)
-+{
-+ return phy->is_c45 &&
-+ (phy->c45_ids.device_ids[1] & 0xfffffff0) == 0xae025150;
-+}
-+
- static int phylink_sfp_connect_phy(void *upstream, struct phy_device *phy)
- {
- struct phylink *pl = upstream;
- __ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
- __ETHTOOL_DECLARE_LINK_MODE_MASK(advertising);
- phy_interface_t interface;
-+ u8 mode;
- int ret;
-
- /*
-@@ -1807,8 +1817,13 @@ static int phylink_sfp_connect_phy(void
- ethtool_convert_legacy_u32_to_link_mode(supported, phy->supported);
- ethtool_convert_legacy_u32_to_link_mode(advertising, phy->advertising);
-
-+ if (phylink_phy_no_inband(phy))
-+ mode = MLO_AN_PHY;
-+ else
-+ mode = MLO_AN_INBAND;
-+
- /* Do the initial configuration */
-- ret = phylink_sfp_config(pl, ML_AN_INBAND, supported, advertising);
-+ ret = phylink_sfp_config(pl, mode, supported, advertising);
- if (ret < 0)
- return ret;
-
+++ /dev/null
-From 0f669e10ede7f06bb998373de6a9d169f47fcc66 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Tue, 5 Nov 2019 11:54:30 +0000
-Subject: [PATCH 655/660] net: phy: add Broadcom BCM84881 PHY driver
-
-Add a rudimentary Clause 45 driver for the BCM84881 PHY, found on
-Methode DM7052 SFPs.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/Kconfig | 5 +
- drivers/net/phy/Makefile | 1 +
- drivers/net/phy/bcm84881.c | 290 +++++++++++++++++++++++++++++++++++++
- 3 files changed, 296 insertions(+)
- create mode 100644 drivers/net/phy/bcm84881.c
-
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -280,6 +280,11 @@ config BROADCOM_PHY
- Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,
- BCM5481, BCM54810 and BCM5482 PHYs.
-
-+config BCM84881_PHY
-+ tristate "Broadcom BCM84881 PHY"
-+ ---help---
-+ Support the Broadcom BCM84881 PHY.
-+
- config CICADA_PHY
- tristate "Cicada PHYs"
- ---help---
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -54,6 +54,7 @@ obj-$(CONFIG_BCM87XX_PHY) += bcm87xx.o
- obj-$(CONFIG_BCM_CYGNUS_PHY) += bcm-cygnus.o
- obj-$(CONFIG_BCM_NET_PHYLIB) += bcm-phy-lib.o
- obj-$(CONFIG_BROADCOM_PHY) += broadcom.o
-+obj-$(CONFIG_BCM84881_PHY) += bcm84881.o
- obj-$(CONFIG_CICADA_PHY) += cicada.o
- obj-$(CONFIG_CORTINA_PHY) += cortina.o
- obj-$(CONFIG_DAVICOM_PHY) += davicom.o
---- /dev/null
-+++ b/drivers/net/phy/bcm84881.c
-@@ -0,0 +1,290 @@
-+// SPDX-License-Identifier: GPL-2.0
-+// Broadcom BCM84881 NBASE-T PHY driver, as found on a SFP+ module.
-+// Copyright (C) 2019 Russell King, Deep Blue Solutions Ltd.
-+//
-+// Like the Marvell 88x3310, the Broadcom 84881 changes its host-side
-+// interface according to the operating speed between 10GBASE-R,
-+// 2500BASE-X and SGMII (but unlike the 88x3310, without the control
-+// word).
-+//
-+// This driver only supports those aspects of the PHY that I'm able to
-+// observe and test with the SFP+ module, which is an incomplete subset
-+// of what this PHY is able to support. For example, I only assume it
-+// supports a single lane Serdes connection, but it may be that the PHY
-+// is able to support more than that.
-+#include <linux/delay.h>
-+#include <linux/module.h>
-+#include <linux/phy.h>
-+
-+enum {
-+ MDIO_AN_C22 = 0xffe0,
-+};
-+
-+static int bcm84881_wait_init(struct phy_device *phydev)
-+{
-+ unsigned int tries = 20;
-+ int ret, val;
-+
-+ do {
-+ val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1);
-+ if (val < 0) {
-+ ret = val;
-+ break;
-+ }
-+ if (!(val & MDIO_CTRL1_RESET)) {
-+ ret = 0;
-+ break;
-+ }
-+ if (!--tries) {
-+ ret = -ETIMEDOUT;
-+ break;
-+ }
-+ msleep(100);
-+ } while (1);
-+
-+ if (ret)
-+ phydev_err(phydev, "%s failed: %d\n", __func__, ret);
-+
-+ return ret;
-+}
-+
-+static int bcm84881_config_init(struct phy_device *phydev)
-+{
-+ switch (phydev->interface) {
-+ case PHY_INTERFACE_MODE_SGMII:
-+ case PHY_INTERFACE_MODE_2500BASEX:
-+ case PHY_INTERFACE_MODE_10GKR:
-+ break;
-+ default:
-+ return -ENODEV;
-+ }
-+ return 0;
-+}
-+
-+static int bcm84881_probe(struct phy_device *phydev)
-+{
-+ /* This driver requires PMAPMD and AN blocks */
-+ const u32 mmd_mask = MDIO_DEVS_PMAPMD | MDIO_DEVS_AN;
-+
-+ if (!phydev->is_c45 ||
-+ (phydev->c45_ids.devices_in_package & mmd_mask) != mmd_mask)
-+ return -ENODEV;
-+
-+ return 0;
-+}
-+
-+static int genphy_c45_an_config_aneg(struct phy_device *phydev)
-+{
-+ bool changed = false;
-+ u32 advertising;
-+ int ret;
-+
-+ phydev->advertising &= phydev->supported;
-+ advertising = phydev->advertising;
-+
-+ ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_ADVERTISE,
-+ ADVERTISE_ALL | ADVERTISE_100BASE4 |
-+ ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM,
-+ ethtool_adv_to_mii_adv_t(advertising));
-+ if (ret < 0)
-+ return ret;
-+ if (ret > 0)
-+ changed = true;
-+
-+ ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
-+ MDIO_AN_10GBT_CTRL_ADV10G,
-+ advertising & ADVERTISED_10000baseT_Full ?
-+ MDIO_AN_10GBT_CTRL_ADV10G : 0);
-+ if (ret < 0)
-+ return ret;
-+ if (ret > 0)
-+ changed = true;
-+
-+ return genphy_c45_check_and_restart_aneg(phydev, changed);
-+}
-+
-+static int bcm84881_config_aneg(struct phy_device *phydev)
-+{
-+ bool changed = false;
-+ u32 adv;
-+ int ret;
-+
-+ /* Wait for the PHY to finish initialising, otherwise our
-+ * advertisement may be overwritten.
-+ */
-+ ret = bcm84881_wait_init(phydev);
-+ if (ret)
-+ return ret;
-+
-+ /* We don't support manual MDI control */
-+ phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
-+
-+ /* disabled autoneg doesn't seem to work with this PHY */
-+ if (phydev->autoneg == AUTONEG_DISABLE)
-+ return -EINVAL;
-+
-+ ret = genphy_c45_an_config_aneg(phydev);
-+ if (ret < 0)
-+ return ret;
-+ if (ret > 0)
-+ changed = true;
-+
-+ adv = ethtool_adv_to_mii_ctrl1000_t(phydev->advertising);
-+ ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN,
-+ MDIO_AN_C22 + MII_CTRL1000,
-+ ADVERTISE_1000FULL | ADVERTISE_1000HALF,
-+ adv);
-+ if (ret < 0)
-+ return ret;
-+ if (ret > 0)
-+ changed = true;
-+
-+ return genphy_c45_check_and_restart_aneg(phydev, changed);
-+}
-+
-+static int bcm84881_aneg_done(struct phy_device *phydev)
-+{
-+ int bmsr, val;
-+
-+ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1);
-+ if (val < 0)
-+ return val;
-+
-+ bmsr = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_C22 + MII_BMSR);
-+ if (bmsr < 0)
-+ return val;
-+
-+ return !!(val & MDIO_AN_STAT1_COMPLETE) &&
-+ !!(bmsr & BMSR_ANEGCOMPLETE);
-+}
-+
-+static int bcm84881_read_status(struct phy_device *phydev)
-+{
-+ bool autoneg_complete;
-+ unsigned int mode;
-+ int bmsr, val;
-+
-+ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_CTRL1);
-+ if (val < 0)
-+ return val;
-+
-+ if (val & MDIO_AN_CTRL1_RESTART) {
-+ phydev->link = 0;
-+ return 0;
-+ }
-+
-+ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1);
-+ if (val < 0)
-+ return val;
-+
-+ bmsr = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_C22 + MII_BMSR);
-+ if (bmsr < 0)
-+ return val;
-+
-+ autoneg_complete = !!(val & MDIO_AN_STAT1_COMPLETE) &&
-+ !!(bmsr & BMSR_ANEGCOMPLETE);
-+ phydev->link = !!(val & MDIO_STAT1_LSTATUS) &&
-+ !!(bmsr & BMSR_LSTATUS);
-+ if (phydev->autoneg == AUTONEG_ENABLE && !autoneg_complete)
-+ phydev->link = false;
-+
-+ if (!phydev->link)
-+ return 0;
-+
-+ phydev->lp_advertising = 0;
-+ phydev->speed = SPEED_UNKNOWN;
-+ phydev->duplex = DUPLEX_UNKNOWN;
-+ phydev->pause = 0;
-+ phydev->asym_pause = 0;
-+ phydev->mdix = 0;
-+
-+ if (autoneg_complete) {
-+ val = genphy_c45_read_lpa(phydev);
-+ if (val < 0)
-+ return val;
-+
-+ val = phy_read_mmd(phydev, MDIO_MMD_AN,
-+ MDIO_AN_C22 + MII_STAT1000);
-+ if (val < 0)
-+ return val;
-+
-+ phydev->lp_advertising |= mii_stat1000_to_ethtool_lpa_t(val);
-+
-+ if (phydev->autoneg == AUTONEG_ENABLE)
-+ phy_resolve_aneg_linkmode(phydev);
-+ }
-+
-+ if (phydev->autoneg == AUTONEG_DISABLE) {
-+ /* disabled autoneg doesn't seem to work, so force the link
-+ * down.
-+ */
-+ phydev->link = 0;
-+ return 0;
-+ }
-+
-+ /* Set the host link mode - we set the phy interface mode and
-+ * the speed according to this register so that downshift works.
-+ * We leave the duplex setting as per the resolution from the
-+ * above.
-+ */
-+ val = phy_read_mmd(phydev, MDIO_MMD_VEND1, 0x4011);
-+ mode = (val & 0x1e) >> 1;
-+ if (mode == 1 || mode == 2)
-+ phydev->interface = PHY_INTERFACE_MODE_SGMII;
-+ else if (mode == 3)
-+ phydev->interface = PHY_INTERFACE_MODE_10GKR;
-+ else if (mode == 4)
-+ phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
-+ switch (mode & 7) {
-+ case 1:
-+ phydev->speed = SPEED_100;
-+ break;
-+ case 2:
-+ phydev->speed = SPEED_1000;
-+ break;
-+ case 3:
-+ phydev->speed = SPEED_10000;
-+ break;
-+ case 4:
-+ phydev->speed = SPEED_2500;
-+ break;
-+ case 5:
-+ phydev->speed = SPEED_5000;
-+ break;
-+ }
-+
-+ return genphy_c45_read_mdix(phydev);
-+}
-+
-+static struct phy_driver bcm84881_drivers[] = {
-+ {
-+ .phy_id = 0xae025150,
-+ .phy_id_mask = 0xfffffff0,
-+ .name = "Broadcom BCM84881",
-+ .features = SUPPORTED_100baseT_Full |
-+ SUPPORTED_100baseT_Half |
-+ SUPPORTED_1000baseT_Full |
-+ SUPPORTED_Autoneg |
-+ SUPPORTED_TP |
-+ SUPPORTED_FIBRE |
-+ SUPPORTED_10000baseT_Full |
-+ SUPPORTED_Backplane,
-+ .config_init = bcm84881_config_init,
-+ .probe = bcm84881_probe,
-+ .config_aneg = bcm84881_config_aneg,
-+ .aneg_done = bcm84881_aneg_done,
-+ .read_status = bcm84881_read_status,
-+ },
-+};
-+
-+module_phy_driver(bcm84881_drivers);
-+
-+/* FIXME: module auto-loading for Clause 45 PHYs seems non-functional */
-+static struct mdio_device_id __maybe_unused bcm84881_tbl[] = {
-+ { 0xae025150, 0xfffffff0 },
-+ { },
-+};
-+MODULE_AUTHOR("Russell King");
-+MODULE_DESCRIPTION("Broadcom BCM84881 PHY driver");
-+MODULE_DEVICE_TABLE(mdio, bcm84881_tbl);
-+MODULE_LICENSE("GPL");
+++ /dev/null
-From 6df6709dc3d00e0bc948d45dfa8d8f18ba379c48 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Tue, 5 Nov 2019 11:56:18 +0000
-Subject: [PATCH 656/660] net: sfp: add support for Clause 45 PHYs
-
-Some SFP+ modules have a Clause 45 PHY onboard, which is accessible via
-the normal I2C address. Detect 10G BASE-T PHYs which may have an
-accessible PHY and probe for it.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 44 +++++++++++++++++++++++++++++++++++++++----
- 1 file changed, 40 insertions(+), 4 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -1337,12 +1337,12 @@ static void sfp_sm_phy_detach(struct sfp
- sfp->mod_phy = NULL;
- }
-
--static void sfp_sm_probe_phy(struct sfp *sfp)
-+static void sfp_sm_probe_phy(struct sfp *sfp, bool is_c45)
- {
- struct phy_device *phy;
- int err;
-
-- phy = mdiobus_scan(sfp->i2c_mii, SFP_PHY_ADDR);
-+ phy = get_phy_device(sfp->i2c_mii, SFP_PHY_ADDR, is_c45);
- if (phy == ERR_PTR(-ENODEV)) {
- dev_info(sfp->dev, "no PHY detected\n");
- return;
-@@ -1352,6 +1352,13 @@ static void sfp_sm_probe_phy(struct sfp
- return;
- }
-
-+ err = phy_device_register(phy);
-+ if (err) {
-+ phy_device_free(phy);
-+ dev_err(sfp->dev, "phy_device_register failed: %d\n", err);
-+ return;
-+ }
-+
- err = sfp_add_phy(sfp->sfp_bus, phy);
- if (err) {
- phy_device_remove(phy);
-@@ -1422,10 +1429,32 @@ static void sfp_sm_fault(struct sfp *sfp
- }
- }
-
-+/* Probe a SFP for a PHY device if the module supports copper - the PHY
-+ * normally sits at I2C bus address 0x56, and may either be a clause 22
-+ * or clause 45 PHY.
-+ *
-+ * Clause 22 copper SFP modules normally operate in Cisco SGMII mode with
-+ * negotiation enabled, but some may be in 1000base-X - which is for the
-+ * PHY driver to determine.
-+ *
-+ * Clause 45 copper SFP+ modules (10G) appear to switch their interface
-+ * mode according to the negotiated line speed.
-+ */
- static void sfp_sm_probe_for_phy(struct sfp *sfp)
- {
-- if (sfp->id.base.e1000_base_t)
-- sfp_sm_probe_phy(sfp);
-+ switch (sfp->id.base.extended_cc) {
-+ case SFF8024_ECC_10GBASE_T_SFI:
-+ case SFF8024_ECC_10GBASE_T_SR:
-+ case SFF8024_ECC_5GBASE_T:
-+ case SFF8024_ECC_2_5GBASE_T:
-+ sfp_sm_probe_phy(sfp, true);
-+ break;
-+
-+ default:
-+ if (sfp->id.base.e1000_base_t)
-+ sfp_sm_probe_phy(sfp, false);
-+ break;
-+ }
- }
-
- static int sfp_module_parse_power(struct sfp *sfp)
-@@ -1485,6 +1514,13 @@ static int sfp_sm_mod_hpower(struct sfp
- return -EAGAIN;
- }
-
-+ /* DM7052 reports as a high power module, responds to reads (with
-+ * all bytes 0xff) at 0x51 but does not accept writes. In any case,
-+ * if the bit is already set, we're already in high power mode.
-+ */
-+ if (!!(val & BIT(0)) == enable)
-+ return 0;
-+
- if (enable)
- val |= BIT(0);
- else
+++ /dev/null
-From 729fd05aac22cdf1e502fbf1bf80e5ebba0d9fbc Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Tue, 3 Dec 2019 17:48:28 +0000
-Subject: [PATCH] net: sfp: fix unbind
-
-When unbinding, we don't correctly tear down the module state, leaving
-(for example) the hwmon registration behind. Ensure everything is
-properly removed by sending a remove event at unbind.
-
-Fixes: 6b0da5c9c1a3 ("net: sfp: track upstream's attachment state in state machine")
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -2260,6 +2260,10 @@ static int sfp_remove(struct platform_de
-
- sfp_unregister_socket(sfp->sfp_bus);
-
-+ rtnl_lock();
-+ sfp_sm_event(sfp, SFP_E_REMOVE);
-+ rtnl_unlock();
-+
- return 0;
- }
-
+++ /dev/null
-From 5eb0df5023c6ae8a71a7848fd5e1f788d86e51ae Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Tue, 3 Dec 2019 18:46:04 +0000
-Subject: [PATCH] net: sfp: fix hwmon
-
-The referenced commit below allowed more than one hwmon device to be
-created per SFP, which is definitely not what we want. Avoid this by
-only creating the hwmon device just as we transition to WAITDEV state.
-
-Fixes: 139d3a212a1f ("net: sfp: allow modules with slow diagnostics to probe")
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 13 ++++---------
- 1 file changed, 4 insertions(+), 9 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -1731,6 +1731,10 @@ static void sfp_sm_module(struct sfp *sf
- break;
- }
-
-+ err = sfp_hwmon_insert(sfp);
-+ if (err)
-+ dev_warn(sfp->dev, "hwmon probe failed: %d\n", err);
-+
- sfp_sm_mod_next(sfp, SFP_MOD_WAITDEV, 0);
- /* fall through */
- case SFP_MOD_WAITDEV:
-@@ -1780,15 +1784,6 @@ static void sfp_sm_module(struct sfp *sf
- case SFP_MOD_ERROR:
- break;
- }
--
--#if IS_ENABLED(CONFIG_HWMON)
-- if (sfp->sm_mod_state >= SFP_MOD_WAITDEV &&
-- IS_ERR_OR_NULL(sfp->hwmon_dev)) {
-- err = sfp_hwmon_insert(sfp);
-- if (err)
-- dev_warn(sfp->dev, "hwmon probe failed: %d\n", err);
-- }
--#endif
- }
-
- static void sfp_sm_main(struct sfp *sfp, unsigned int event)
+++ /dev/null
-From 4d6bfb6fbb00af38402db4d1ce464e22def9fd9e Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Thu, 28 Nov 2019 14:24:40 +0000
-Subject: [PATCH 1/4] net: sfp: use a definition for the fault recovery
- attempts
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 14 +++++++++++---
- 1 file changed, 11 insertions(+), 3 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -170,6 +170,14 @@ static const enum gpiod_flags gpio_flags
- #define T_RESET_US 10
- #define T_FAULT_RECOVER msecs_to_jiffies(1000)
-
-+/* N_FAULT_INIT is the number of recovery attempts at module initialisation
-+ * time. If the TX_FAULT signal is not deasserted after this number of
-+ * attempts at clearing it, we decide that the module is faulty.
-+ * N_FAULT is the same but after the module has initialised.
-+ */
-+#define N_FAULT_INIT 5
-+#define N_FAULT 5
-+
- /* SFP module presence detection is poor: the three MOD DEF signals are
- * the same length on the PCB, which means it's possible for MOD DEF 0 to
- * connect before the I2C bus on MOD DEF 1/2.
-@@ -1820,7 +1828,7 @@ static void sfp_sm_main(struct sfp *sfp,
- sfp_module_tx_enable(sfp);
-
- /* Initialise the fault clearance retries */
-- sfp->sm_retries = 5;
-+ sfp->sm_retries = N_FAULT_INIT;
-
- /* We need to check the TX_FAULT state, which is not defined
- * while TX_DISABLE is asserted. The earliest we want to do
-@@ -1860,7 +1868,7 @@ static void sfp_sm_main(struct sfp *sfp,
- * or t_start_up, so assume there is a fault.
- */
- sfp_sm_fault(sfp, SFP_S_INIT_TX_FAULT,
-- sfp->sm_retries == 5);
-+ sfp->sm_retries == N_FAULT_INIT);
- } else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) {
- init_done: /* TX_FAULT deasserted or we timed out with TX_FAULT
- * clear. Probe for the PHY and check the LOS state.
-@@ -1873,7 +1881,7 @@ static void sfp_sm_main(struct sfp *sfp,
- sfp_sm_link_check_los(sfp);
-
- /* Reset the fault retry count */
-- sfp->sm_retries = 5;
-+ sfp->sm_retries = N_FAULT;
- }
- break;
-
+++ /dev/null
-From bfa3cbb01c7ea34d7369c9bd2ec1b2dc67082b04 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Mon, 2 Dec 2019 18:06:44 +0000
-Subject: [PATCH 2/4] net: sfp: rename sm_retries
-
-Rename sm_retries as sm_fault_retries, as this is what this member is
-tracking.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 10 +++++-----
- 1 file changed, 5 insertions(+), 5 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -232,7 +232,7 @@ struct sfp {
- unsigned char sm_mod_tries;
- unsigned char sm_dev_state;
- unsigned short sm_state;
-- unsigned int sm_retries;
-+ unsigned char sm_fault_retries;
-
- struct sfp_eeprom_id id;
- unsigned int module_power_mW;
-@@ -1425,7 +1425,7 @@ static bool sfp_los_event_inactive(struc
-
- static void sfp_sm_fault(struct sfp *sfp, unsigned int next_state, bool warn)
- {
-- if (sfp->sm_retries && !--sfp->sm_retries) {
-+ if (sfp->sm_fault_retries && !--sfp->sm_fault_retries) {
- dev_err(sfp->dev,
- "module persistently indicates fault, disabling\n");
- sfp_sm_next(sfp, SFP_S_TX_DISABLE, 0);
-@@ -1828,7 +1828,7 @@ static void sfp_sm_main(struct sfp *sfp,
- sfp_module_tx_enable(sfp);
-
- /* Initialise the fault clearance retries */
-- sfp->sm_retries = N_FAULT_INIT;
-+ sfp->sm_fault_retries = N_FAULT_INIT;
-
- /* We need to check the TX_FAULT state, which is not defined
- * while TX_DISABLE is asserted. The earliest we want to do
-@@ -1868,7 +1868,7 @@ static void sfp_sm_main(struct sfp *sfp,
- * or t_start_up, so assume there is a fault.
- */
- sfp_sm_fault(sfp, SFP_S_INIT_TX_FAULT,
-- sfp->sm_retries == N_FAULT_INIT);
-+ sfp->sm_fault_retries == N_FAULT_INIT);
- } else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) {
- init_done: /* TX_FAULT deasserted or we timed out with TX_FAULT
- * clear. Probe for the PHY and check the LOS state.
-@@ -1881,7 +1881,7 @@ static void sfp_sm_main(struct sfp *sfp,
- sfp_sm_link_check_los(sfp);
-
- /* Reset the fault retry count */
-- sfp->sm_retries = N_FAULT;
-+ sfp->sm_fault_retries = N_FAULT;
- }
- break;
-
+++ /dev/null
-From 1fba543dc8edf4a43bff3276306648bb27c1e207 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 29 Nov 2019 00:30:08 +0000
-Subject: [PATCH 3/4] net: sfp: error handling for phy probe
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 26 +++++++++++++++++---------
- 1 file changed, 17 insertions(+), 9 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -1345,7 +1345,7 @@ static void sfp_sm_phy_detach(struct sfp
- sfp->mod_phy = NULL;
- }
-
--static void sfp_sm_probe_phy(struct sfp *sfp, bool is_c45)
-+static int sfp_sm_probe_phy(struct sfp *sfp, bool is_c45)
- {
- struct phy_device *phy;
- int err;
-@@ -1353,18 +1353,18 @@ static void sfp_sm_probe_phy(struct sfp
- phy = get_phy_device(sfp->i2c_mii, SFP_PHY_ADDR, is_c45);
- if (phy == ERR_PTR(-ENODEV)) {
- dev_info(sfp->dev, "no PHY detected\n");
-- return;
-+ return 0;
- }
- if (IS_ERR(phy)) {
- dev_err(sfp->dev, "mdiobus scan returned %ld\n", PTR_ERR(phy));
-- return;
-+ return PTR_ERR(phy);
- }
-
- err = phy_device_register(phy);
- if (err) {
- phy_device_free(phy);
- dev_err(sfp->dev, "phy_device_register failed: %d\n", err);
-- return;
-+ return err;
- }
-
- err = sfp_add_phy(sfp->sfp_bus, phy);
-@@ -1372,10 +1372,12 @@ static void sfp_sm_probe_phy(struct sfp
- phy_device_remove(phy);
- phy_device_free(phy);
- dev_err(sfp->dev, "sfp_add_phy failed: %d\n", err);
-- return;
-+ return err;
- }
-
- sfp->mod_phy = phy;
-+
-+ return 0;
- }
-
- static void sfp_sm_link_up(struct sfp *sfp)
-@@ -1448,21 +1450,24 @@ static void sfp_sm_fault(struct sfp *sfp
- * Clause 45 copper SFP+ modules (10G) appear to switch their interface
- * mode according to the negotiated line speed.
- */
--static void sfp_sm_probe_for_phy(struct sfp *sfp)
-+static int sfp_sm_probe_for_phy(struct sfp *sfp)
- {
-+ int err = 0;
-+
- switch (sfp->id.base.extended_cc) {
- case SFF8024_ECC_10GBASE_T_SFI:
- case SFF8024_ECC_10GBASE_T_SR:
- case SFF8024_ECC_5GBASE_T:
- case SFF8024_ECC_2_5GBASE_T:
-- sfp_sm_probe_phy(sfp, true);
-+ err = sfp_sm_probe_phy(sfp, true);
- break;
-
- default:
- if (sfp->id.base.e1000_base_t)
-- sfp_sm_probe_phy(sfp, false);
-+ err = sfp_sm_probe_phy(sfp, false);
- break;
- }
-+ return err;
- }
-
- static int sfp_module_parse_power(struct sfp *sfp)
-@@ -1873,7 +1878,10 @@ static void sfp_sm_main(struct sfp *sfp,
- init_done: /* TX_FAULT deasserted or we timed out with TX_FAULT
- * clear. Probe for the PHY and check the LOS state.
- */
-- sfp_sm_probe_for_phy(sfp);
-+ if (sfp_sm_probe_for_phy(sfp)) {
-+ sfp_sm_next(sfp, SFP_S_FAIL, 0);
-+ break;
-+ }
- if (sfp_module_start(sfp->sfp_bus)) {
- sfp_sm_next(sfp, SFP_S_FAIL, 0);
- break;
+++ /dev/null
-From 6c4efe83a0acf6f06c89ae17b885fa5739eb5be7 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Mon, 2 Dec 2019 18:20:22 +0000
-Subject: [PATCH 4/4] net: sfp: re-attempt probing for phy
-
-Some 1000BASE-T PHY modules take a while for the PHY to wake up.
-Retry the probe a number of times before deciding that the module has
-no PHY.
-
-Tested with:
- Sourcephotonics SPGBTXCNFC - PHY takes less than 50ms to respond.
- Champion One 1000SFPT - PHY takes about 200ms to respond.
- Mikrotik S-RJ01 - no PHY
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 59 ++++++++++++++++++++++++++++++++++++---------------
- 1 file changed, 42 insertions(+), 17 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -60,6 +60,7 @@ enum {
- SFP_S_FAIL,
- SFP_S_WAIT,
- SFP_S_INIT,
-+ SFP_S_INIT_PHY,
- SFP_S_INIT_TX_FAULT,
- SFP_S_WAIT_LOS,
- SFP_S_LINK_UP,
-@@ -124,6 +125,7 @@ static const char * const sm_state_strin
- [SFP_S_FAIL] = "fail",
- [SFP_S_WAIT] = "wait",
- [SFP_S_INIT] = "init",
-+ [SFP_S_INIT_PHY] = "init_phy",
- [SFP_S_INIT_TX_FAULT] = "init_tx_fault",
- [SFP_S_WAIT_LOS] = "wait_los",
- [SFP_S_LINK_UP] = "link_up",
-@@ -178,6 +180,12 @@ static const enum gpiod_flags gpio_flags
- #define N_FAULT_INIT 5
- #define N_FAULT 5
-
-+/* T_PHY_RETRY is the time interval between attempts to probe the PHY.
-+ * R_PHY_RETRY is the number of attempts.
-+ */
-+#define T_PHY_RETRY msecs_to_jiffies(50)
-+#define R_PHY_RETRY 12
-+
- /* SFP module presence detection is poor: the three MOD DEF signals are
- * the same length on the PCB, which means it's possible for MOD DEF 0 to
- * connect before the I2C bus on MOD DEF 1/2.
-@@ -233,6 +241,7 @@ struct sfp {
- unsigned char sm_dev_state;
- unsigned short sm_state;
- unsigned char sm_fault_retries;
-+ unsigned char sm_phy_retries;
-
- struct sfp_eeprom_id id;
- unsigned int module_power_mW;
-@@ -1351,10 +1360,8 @@ static int sfp_sm_probe_phy(struct sfp *
- int err;
-
- phy = get_phy_device(sfp->i2c_mii, SFP_PHY_ADDR, is_c45);
-- if (phy == ERR_PTR(-ENODEV)) {
-- dev_info(sfp->dev, "no PHY detected\n");
-- return 0;
-- }
-+ if (phy == ERR_PTR(-ENODEV))
-+ return PTR_ERR(phy);
- if (IS_ERR(phy)) {
- dev_err(sfp->dev, "mdiobus scan returned %ld\n", PTR_ERR(phy));
- return PTR_ERR(phy);
-@@ -1802,6 +1809,7 @@ static void sfp_sm_module(struct sfp *sf
- static void sfp_sm_main(struct sfp *sfp, unsigned int event)
- {
- unsigned long timeout;
-+ int ret;
-
- /* Some events are global */
- if (sfp->sm_state != SFP_S_DOWN &&
-@@ -1875,22 +1883,39 @@ static void sfp_sm_main(struct sfp *sfp,
- sfp_sm_fault(sfp, SFP_S_INIT_TX_FAULT,
- sfp->sm_fault_retries == N_FAULT_INIT);
- } else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) {
-- init_done: /* TX_FAULT deasserted or we timed out with TX_FAULT
-- * clear. Probe for the PHY and check the LOS state.
-- */
-- if (sfp_sm_probe_for_phy(sfp)) {
-- sfp_sm_next(sfp, SFP_S_FAIL, 0);
-- break;
-- }
-- if (sfp_module_start(sfp->sfp_bus)) {
-- sfp_sm_next(sfp, SFP_S_FAIL, 0);
-+ init_done:
-+ sfp->sm_phy_retries = R_PHY_RETRY;
-+ goto phy_probe;
-+ }
-+ break;
-+
-+ case SFP_S_INIT_PHY:
-+ if (event != SFP_E_TIMEOUT)
-+ break;
-+ phy_probe:
-+ /* TX_FAULT deasserted or we timed out with TX_FAULT
-+ * clear. Probe for the PHY and check the LOS state.
-+ */
-+ ret = sfp_sm_probe_for_phy(sfp);
-+ if (ret == -ENODEV) {
-+ if (--sfp->sm_phy_retries) {
-+ sfp_sm_next(sfp, SFP_S_INIT_PHY, T_PHY_RETRY);
- break;
-+ } else {
-+ dev_info(sfp->dev, "no PHY detected\n");
- }
-- sfp_sm_link_check_los(sfp);
--
-- /* Reset the fault retry count */
-- sfp->sm_fault_retries = N_FAULT;
-+ } else if (ret) {
-+ sfp_sm_next(sfp, SFP_S_FAIL, 0);
-+ break;
- }
-+ if (sfp_module_start(sfp->sfp_bus)) {
-+ sfp_sm_next(sfp, SFP_S_FAIL, 0);
-+ break;
-+ }
-+ sfp_sm_link_check_los(sfp);
-+
-+ /* Reset the fault retry count */
-+ sfp->sm_fault_retries = N_FAULT;
- break;
-
- case SFP_S_INIT_TX_FAULT:
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Subject: [PATCH] bcma: get SoC device struct & copy its DMA params to the
- subdevices
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-For bus devices to be fully usable it's required to set their DMA
-parameters.
-
-For years it has been missing and remained unnoticed because of
-mips_dma_alloc_coherent() silently handling the empty coherent_dma_mask.
-Kernel 4.19 came with a lot of DMA changes and caused a regression on
-the bcm47xx. Starting with the commit f8c55dc6e828 ("MIPS: use generic
-dma noncoherent ops for simple noncoherent platforms") DMA coherent
-allocations just fail. Example:
-[ 1.114914] bgmac_bcma bcma0:2: Allocation of TX ring 0x200 failed
-[ 1.121215] bgmac_bcma bcma0:2: Unable to alloc memory for DMA
-[ 1.127626] bgmac_bcma: probe of bcma0:2 failed with error -12
-[ 1.133838] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
-
-This change fixes above regression in addition to the MIPS bcm47xx
-commit 321c46b91550 ("MIPS: BCM47XX: Setup struct device for the SoC").
-
-It also fixes another *old* GPIO regression caused by a parent pointing
-to the NULL:
-[ 0.157054] missing gpiochip .dev parent pointer
-[ 0.157287] bcma: bus0: Error registering GPIO driver: -22
-introduced by the commit 74f4e0cc6108 ("bcma: switch GPIO portions to
-use GPIOLIB_IRQCHIP").
-
-Fixes: f8c55dc6e828 ("MIPS: use generic dma noncoherent ops for simple noncoherent platforms")
-Fixes: 74f4e0cc6108 ("bcma: switch GPIO portions to use GPIOLIB_IRQCHIP")
-Cc: linux-mips@linux-mips.org
-Cc: Christoph Hellwig <hch@lst.de>
-Cc: Linus Walleij <linus.walleij@linaro.org>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/drivers/bcma/host_soc.c
-+++ b/drivers/bcma/host_soc.c
-@@ -191,6 +191,8 @@ int __init bcma_host_soc_init(struct bcm
- struct bcma_bus *bus = &soc->bus;
- int err;
-
-+ bus->dev = soc->dev;
-+
- /* Scan bus and initialize it */
- err = bcma_bus_early_register(bus);
- if (err)
---- a/drivers/bcma/main.c
-+++ b/drivers/bcma/main.c
-@@ -236,12 +236,16 @@ EXPORT_SYMBOL(bcma_core_irq);
-
- void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core)
- {
-+ struct device *dev = &core->dev;
-+
- core->dev.release = bcma_release_core_dev;
- core->dev.bus = &bcma_bus_type;
- dev_set_name(&core->dev, "bcma%d:%d", bus->num, core->core_index);
- core->dev.parent = bus->dev;
-- if (bus->dev)
-+ if (bus->dev) {
- bcma_of_fill_device(bus->dev, core);
-+ dma_coerce_mask_and_coherent(dev, bus->dev->coherent_dma_mask);
-+ }
-
- switch (bus->hosttype) {
- case BCMA_HOSTTYPE_PCI:
+++ /dev/null
-From: Gabor Juhos <juhosg@openwrt.org>
-Subject: debloat: add kernel config option to disabling common PCI quirks
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
----
- drivers/pci/Kconfig | 6 ++++++
- drivers/pci/quirks.c | 6 ++++++
- 2 files changed, 12 insertions(+)
-
---- a/drivers/pci/Kconfig
-+++ b/drivers/pci/Kconfig
-@@ -89,6 +89,13 @@ config XEN_PCIDEV_FRONTEND
- The PCI device frontend driver allows the kernel to import arbitrary
- PCI devices from a PCI backend to support PCI driver domains.
-
-+config PCI_DISABLE_COMMON_QUIRKS
-+ bool "PCI disable common quirks"
-+ depends on PCI
-+ help
-+ If you don't know what to do here, say N.
-+
-+
- config PCI_ATS
- bool
-
---- a/drivers/pci/quirks.c
-+++ b/drivers/pci/quirks.c
-@@ -207,6 +207,7 @@ static void quirk_mmio_always_on(struct
- DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_ANY_ID, PCI_ANY_ID,
- PCI_CLASS_BRIDGE_HOST, 8, quirk_mmio_always_on);
-
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
- /*
- * The Mellanox Tavor device gives false positive parity errors. Mark this
- * device with a broken_parity_status to allow PCI scanning code to "skip"
-@@ -3226,6 +3227,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
- DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata);
- DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata);
-
-+#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
-+
- /*
- * Ivytown NTB BAR sizes are misreported by the hardware due to an erratum.
- * To work around this, query the size it should be configured to by the
-@@ -3251,6 +3254,8 @@ static void quirk_intel_ntb(struct pci_d
- DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e08, quirk_intel_ntb);
- DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e0d, quirk_intel_ntb);
-
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
-+
- /*
- * Some BIOS implementations leave the Intel GPU interrupts enabled, even
- * though no one is handling them (e.g., if the i915 driver is never
-@@ -3289,6 +3294,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
- DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
- DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq);
-
-+#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
-+
- /*
- * PCI devices which are on Intel chips can skip the 10ms delay
- * before entering D3 mode.
+++ /dev/null
-From: Felix Fietkau <nbd@nbd.name>
-Subject: debloat: disable common USB quirks
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
- drivers/usb/host/pci-quirks.c | 16 ++++++++++++++++
- drivers/usb/host/pci-quirks.h | 18 +++++++++++++++++-
- include/linux/usb/hcd.h | 7 +++++++
- 3 files changed, 40 insertions(+), 1 deletion(-)
-
---- a/drivers/usb/host/pci-quirks.c
-+++ b/drivers/usb/host/pci-quirks.c
-@@ -125,6 +125,8 @@ struct amd_chipset_type {
- u8 rev;
- };
-
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
-+
- static struct amd_chipset_info {
- struct pci_dev *nb_dev;
- struct pci_dev *smbus_dev;
-@@ -628,6 +630,10 @@ bool usb_amd_pt_check_port(struct device
- }
- EXPORT_SYMBOL_GPL(usb_amd_pt_check_port);
-
-+#endif /* CONFIG_PCI_DISABLE_COMMON_QUIRKS */
-+
-+#if IS_ENABLED(CONFIG_USB_UHCI_HCD)
-+
- /*
- * Make sure the controller is completely inactive, unable to
- * generate interrupts or do DMA.
-@@ -707,8 +713,17 @@ reset_needed:
- uhci_reset_hc(pdev, base);
- return 1;
- }
-+#else
-+int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base)
-+{
-+ return 0;
-+}
-+
-+#endif
- EXPORT_SYMBOL_GPL(uhci_check_and_reset_hc);
-
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
-+
- static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask)
- {
- u16 cmd;
-@@ -1275,3 +1290,4 @@ static void quirk_usb_early_handoff(stru
- }
- DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID,
- PCI_CLASS_SERIAL_USB, 8, quirk_usb_early_handoff);
-+#endif
---- a/drivers/usb/host/pci-quirks.h
-+++ b/drivers/usb/host/pci-quirks.h
-@@ -5,6 +5,9 @@
- #ifdef CONFIG_USB_PCI
- void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
- int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
-+#endif /* CONFIG_USB_PCI */
-+
-+#if defined(CONFIG_USB_PCI) && !defined(CONFIG_PCI_DISABLE_COMMON_QUIRKS)
- int usb_amd_find_chipset_info(void);
- int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *pdev);
- bool usb_amd_hang_symptom_quirk(void);
-@@ -19,6 +22,18 @@ void sb800_prefetch(struct device *dev,
- bool usb_amd_pt_check_port(struct device *device, int port);
- #else
- struct pci_dev;
-+static inline int usb_amd_find_chipset_info(void)
-+{
-+ return 0;
-+}
-+static inline bool usb_amd_hang_symptom_quirk(void)
-+{
-+ return false;
-+}
-+static inline bool usb_amd_prefetch_quirk(void)
-+{
-+ return false;
-+}
- static inline void usb_amd_quirk_pll_disable(void) {}
- static inline void usb_amd_quirk_pll_enable(void) {}
- static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {}
-@@ -29,6 +44,11 @@ static inline bool usb_amd_pt_check_port
- {
- return false;
- }
-+static inline void usb_enable_intel_xhci_ports(struct pci_dev *xhci_pdev) {}
-+static inline bool usb_xhci_needs_pci_reset(struct pci_dev *pdev)
-+{
-+ return false;
-+}
- #endif /* CONFIG_USB_PCI */
-
- #endif /* __LINUX_USB_PCI_QUIRKS_H */
---- a/include/linux/usb/hcd.h
-+++ b/include/linux/usb/hcd.h
-@@ -473,7 +473,14 @@ extern int usb_hcd_pci_probe(struct pci_
- extern void usb_hcd_pci_remove(struct pci_dev *dev);
- extern void usb_hcd_pci_shutdown(struct pci_dev *dev);
-
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
- extern int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev);
-+#else
-+static inline int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev)
-+{
-+ return 0;
-+}
-+#endif
-
- #ifdef CONFIG_PM
- extern const struct dev_pm_ops usb_hcd_pci_pm_ops;
+++ /dev/null
-From: Daniel Golle <daniel@makrotopia.org>
-Subject: libata: add ledtrig support
-
-This adds a LED trigger for each ATA port indicating disk activity.
-
-As this is needed only on specific platforms (NAS SoCs and such),
-these platforms should define ARCH_WANTS_LIBATA_LEDS if there
-are boards with LED(s) intended to indicate ATA disk activity and
-need the OS to take care of that.
-In that way, if not selected, LED trigger support not will be
-included in libata-core and both, codepaths and structures remain
-untouched.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
----
- drivers/ata/Kconfig | 16 ++++++++++++++++
- drivers/ata/libata-core.c | 41 +++++++++++++++++++++++++++++++++++++++++
- include/linux/libata.h | 9 +++++++++
- 3 files changed, 66 insertions(+)
-
---- a/drivers/ata/Kconfig
-+++ b/drivers/ata/Kconfig
-@@ -46,6 +46,22 @@ config ATA_VERBOSE_ERROR
-
- If unsure, say Y.
-
-+config ARCH_WANT_LIBATA_LEDS
-+ bool
-+
-+config ATA_LEDS
-+ bool "support ATA port LED triggers"
-+ depends on ARCH_WANT_LIBATA_LEDS
-+ select NEW_LEDS
-+ select LEDS_CLASS
-+ select LEDS_TRIGGERS
-+ default y
-+ help
-+ This option adds a LED trigger for each registered ATA port.
-+ It is used to drive disk activity leds connected via GPIO.
-+
-+ If unsure, say N.
-+
- config ATA_ACPI
- bool "ATA ACPI Support"
- depends on ACPI
---- a/drivers/ata/libata-core.c
-+++ b/drivers/ata/libata-core.c
-@@ -730,6 +730,19 @@ u64 ata_tf_read_block(const struct ata_t
- return block;
- }
-
-+#ifdef CONFIG_ATA_LEDS
-+#define LIBATA_BLINK_DELAY 20 /* ms */
-+static inline void ata_led_act(struct ata_port *ap)
-+{
-+ unsigned long led_delay = LIBATA_BLINK_DELAY;
-+
-+ if (unlikely(!ap->ledtrig))
-+ return;
-+
-+ led_trigger_blink_oneshot(ap->ledtrig, &led_delay, &led_delay, 0);
-+}
-+#endif
-+
- /**
- * ata_build_rw_tf - Build ATA taskfile for given read/write request
- * @tf: Target ATA taskfile
-@@ -5133,6 +5146,9 @@ struct ata_queued_cmd *ata_qc_new_init(s
- if (tag < 0)
- return NULL;
- }
-+#ifdef CONFIG_ATA_LEDS
-+ ata_led_act(ap);
-+#endif
-
- qc = __ata_qc_from_tag(ap, tag);
- qc->tag = qc->hw_tag = tag;
-@@ -6067,6 +6083,9 @@ struct ata_port *ata_port_alloc(struct a
- ap->stats.unhandled_irq = 1;
- ap->stats.idle_irq = 1;
- #endif
-+#ifdef CONFIG_ATA_LEDS
-+ ap->ledtrig = kzalloc(sizeof(struct led_trigger), GFP_KERNEL);
-+#endif
- ata_sff_port_init(ap);
-
- return ap;
-@@ -6102,6 +6121,12 @@ static void ata_host_release(struct kref
-
- kfree(ap->pmp_link);
- kfree(ap->slave_link);
-+#ifdef CONFIG_ATA_LEDS
-+ if (ap->ledtrig) {
-+ led_trigger_unregister(ap->ledtrig);
-+ kfree(ap->ledtrig);
-+ };
-+#endif
- kfree(ap);
- host->ports[i] = NULL;
- }
-@@ -6565,7 +6590,23 @@ int ata_host_register(struct ata_host *h
- host->ports[i]->print_id = atomic_inc_return(&ata_print_id);
- host->ports[i]->local_port_no = i + 1;
- }
-+#ifdef CONFIG_ATA_LEDS
-+ for (i = 0; i < host->n_ports; i++) {
-+ if (unlikely(!host->ports[i]->ledtrig))
-+ continue;
-
-+ snprintf(host->ports[i]->ledtrig_name,
-+ sizeof(host->ports[i]->ledtrig_name), "ata%u",
-+ host->ports[i]->print_id);
-+
-+ host->ports[i]->ledtrig->name = host->ports[i]->ledtrig_name;
-+
-+ if (led_trigger_register(host->ports[i]->ledtrig)) {
-+ kfree(host->ports[i]->ledtrig);
-+ host->ports[i]->ledtrig = NULL;
-+ }
-+ }
-+#endif
- /* Create associated sysfs transport objects */
- for (i = 0; i < host->n_ports; i++) {
- rc = ata_tport_add(host->dev,host->ports[i]);
---- a/include/linux/libata.h
-+++ b/include/linux/libata.h
-@@ -39,6 +39,9 @@
- #include <linux/cdrom.h>
- #include <linux/sched.h>
- #include <linux/async.h>
-+#ifdef CONFIG_ATA_LEDS
-+#include <linux/leds.h>
-+#endif
-
- /*
- * Define if arch has non-standard setup. This is a _PCI_ standard
-@@ -896,6 +899,12 @@ struct ata_port {
- #ifdef CONFIG_ATA_ACPI
- struct ata_acpi_gtm __acpi_init_gtm; /* use ata_acpi_init_gtm() */
- #endif
-+
-+#ifdef CONFIG_ATA_LEDS
-+ struct led_trigger *ledtrig;
-+ char ledtrig_name[8];
-+#endif
-+
- /* owned by EH */
- u8 sector_buf[ATA_SECT_SIZE] ____cacheline_aligned;
- };
+++ /dev/null
-From: Imre Kaloz <kaloz@openwrt.org>
-Subject: init: add CONFIG_MANGLE_BOOTARGS and disable it by default
-
-Enabling this option renames the bootloader supplied root=
-and rootfstype= variables, which might have to be know but
-would break the automatisms OpenWrt uses.
-
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
----
- init/Kconfig | 9 +++++++++
- init/main.c | 24 ++++++++++++++++++++++++
- 2 files changed, 33 insertions(+)
-
---- a/init/Kconfig
-+++ b/init/Kconfig
-@@ -1531,6 +1531,15 @@ config EMBEDDED
- an embedded system so certain expert options are available
- for configuration.
-
-+config MANGLE_BOOTARGS
-+ bool "Rename offending bootargs"
-+ depends on EXPERT
-+ help
-+ Sometimes the bootloader passed bogus root= and rootfstype=
-+ parameters to the kernel, and while you want to ignore them,
-+ you need to know the values f.e. to support dual firmware
-+ layouts on the flash.
-+
- config HAVE_PERF_EVENTS
- bool
- help
---- a/init/main.c
-+++ b/init/main.c
-@@ -365,6 +365,29 @@ static inline void setup_nr_cpu_ids(void
- static inline void smp_prepare_cpus(unsigned int maxcpus) { }
- #endif
-
-+#ifdef CONFIG_MANGLE_BOOTARGS
-+static void __init mangle_bootargs(char *command_line)
-+{
-+ char *rootdev;
-+ char *rootfs;
-+
-+ rootdev = strstr(command_line, "root=/dev/mtdblock");
-+
-+ if (rootdev)
-+ strncpy(rootdev, "mangled_rootblock=", 18);
-+
-+ rootfs = strstr(command_line, "rootfstype");
-+
-+ if (rootfs)
-+ strncpy(rootfs, "mangled_fs", 10);
-+
-+}
-+#else
-+static void __init mangle_bootargs(char *command_line)
-+{
-+}
-+#endif
-+
- /*
- * We need to store the untouched command line for future reference.
- * We also need to store the touched command line since the parameter
-@@ -557,6 +580,7 @@ asmlinkage __visible void __init start_k
- add_device_randomness(command_line, strlen(command_line));
- boot_init_stack_canary();
- mm_init_cpumask(&init_mm);
-+ mangle_bootargs(command_line);
- setup_command_line(command_line);
- setup_nr_cpu_ids();
- setup_per_cpu_areas();
+++ /dev/null
-CONFIG_AHCI_IMX=y
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_KCOV=y
-CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
-CONFIG_ARCH_HAS_PHYS_TO_DMA=y
-CONFIG_ARCH_HAS_RESET_CONTROLLER=y
-CONFIG_ARCH_HAS_SET_MEMORY=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
-CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MMAP_RND_BITS_MAX=15
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_MXC=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARM=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_CRYPTO=y
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_ARM_ERRATA_764369=y
-CONFIG_ARM_ERRATA_775420=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_HEAVY_MB=y
-CONFIG_ARM_IMX6Q_CPUFREQ=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-# CONFIG_ARM_LPAE is not set
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ASN1=y
-CONFIG_ASSOCIATIVE_ARRAY=y
-CONFIG_ATA=y
-CONFIG_ATAGS=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_CACHE_L2X0=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_IMX_GPT=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CLZ_TAB=y
-CONFIG_CMDLINE="pci=nomsi"
-CONFIG_CMDLINE_EXTEND=y
-CONFIG_COMMON_CLK=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPUFREQ_DT_PLATDEV=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_HAS_ASID=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SPECTRE=y
-CONFIG_CPU_THERMAL=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-# CONFIG_CRASHLOG is not set
-CONFIG_CRC16=y
-CONFIG_CRYPTO_ACOMP2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_AES_ARM=y
-CONFIG_CRYPTO_AES_ARM_BS=y
-# CONFIG_CRYPTO_AES_ARM_CE is not set
-CONFIG_CRYPTO_AKCIPHER=y
-CONFIG_CRYPTO_AKCIPHER2=y
-CONFIG_CRYPTO_AUTHENC=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CHACHA20=y
-CONFIG_CRYPTO_CHACHA20_NEON=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CRC32_ARM_CE=y
-CONFIG_CRYPTO_CRYPTD=y
-CONFIG_CRYPTO_CTR=y
-CONFIG_CRYPTO_CTS=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_DEV_FSL_CAAM=y
-CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API=y
-CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API=y
-CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC=y
-# CONFIG_CRYPTO_DEV_FSL_CAAM_DEBUG is not set
-# CONFIG_CRYPTO_DEV_FSL_CAAM_INTC is not set
-CONFIG_CRYPTO_DEV_FSL_CAAM_JR=y
-CONFIG_CRYPTO_DEV_FSL_CAAM_PKC_API=y
-CONFIG_CRYPTO_DEV_FSL_CAAM_RINGSIZE=9
-CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API=y
-CONFIG_CRYPTO_DRBG=y
-CONFIG_CRYPTO_DRBG_HMAC=y
-CONFIG_CRYPTO_DRBG_MENU=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_GF128MUL=y
-# CONFIG_CRYPTO_GHASH_ARM_CE is not set
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_JITTERENTROPY=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_RNG_DEFAULT=y
-CONFIG_CRYPTO_RSA=y
-CONFIG_CRYPTO_SEQIV=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA1_ARM=y
-# CONFIG_CRYPTO_SHA1_ARM_CE is not set
-CONFIG_CRYPTO_SHA1_ARM_NEON=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA256_ARM=y
-# CONFIG_CRYPTO_SHA2_ARM_CE is not set
-CONFIG_CRYPTO_SHA512_ARM=y
-CONFIG_CRYPTO_SIMD=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CRYPTO_XTS=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_IMX_UART_PORT=1
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-# CONFIG_DEBUG_USER is not set
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_DECOMPRESS_XZ=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_DTC=y
-CONFIG_E1000E=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_ENCRYPTED_KEYS=y
-CONFIG_EXT4_ENCRYPTION=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_ENCRYPTION=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-CONFIG_EXTCON=y
-CONFIG_EXTRA_FIRMWARE="imx/sdma/sdma-imx6q.bin"
-CONFIG_EXTRA_FIRMWARE_DIR="firmware"
-CONFIG_F2FS_FS=y
-CONFIG_FEC=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FRAME_POINTER=y
-CONFIG_FSL_GUTS=y
-CONFIG_FS_ENCRYPTION=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-# CONFIG_GIANFAR is not set
-CONFIG_GLOB=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_MXC=y
-CONFIG_GPIO_PCA953X=y
-CONFIG_GPIO_PCA953X_IRQ=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_BITREVERSE=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARM_SCU=y
-CONFIG_HAVE_ARM_SMCCC=y
-CONFIG_HAVE_ARM_TWD=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
-CONFIG_HAVE_EBPF_JIT=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IMX_ANATOP=y
-CONFIG_HAVE_IMX_GPC=y
-CONFIG_HAVE_IMX_MMDC=y
-CONFIG_HAVE_IMX_SRC=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_RSEQ=y
-CONFIG_HAVE_SMP=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HWMON=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_IMX_RNGC=y
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IMX=y
-# CONFIG_I2C_IMX_LPI2C is not set
-CONFIG_IMX2_WDT=y
-CONFIG_IMX_DMA=y
-CONFIG_IMX_SDMA=y
-CONFIG_IMX_THERMAL=y
-# CONFIG_IMX_WEIM is not set
-# CONFIG_INITRAMFS_FORCE is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-# CONFIG_JFFS2_FS is not set
-CONFIG_KEYS=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MARVELL_PHY=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MICREL_PHY=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_MXC is not set
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ESDHC_IMX=y
-CONFIG_MMC_SDHCI_IO_ACCESSORS=y
-CONFIG_MMC_SDHCI_OF_ESDHC=y
-# CONFIG_MMC_SDHCI_PCI is not set
-CONFIG_MMC_SDHCI_PLTFM=y
-# CONFIG_MMC_TIFM_SD is not set
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MPILIB=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_GPMI_NAND=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-# CONFIG_MX3_IPU is not set
-CONFIG_MXS_DMA=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEON=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_MV88E6XXX=y
-CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y
-# CONFIG_NET_DSA_MV88E6XXX_PTP is not set
-CONFIG_NET_DSA_TAG_DSA=y
-CONFIG_NET_DSA_TAG_EDSA=y
-# CONFIG_NET_DSA_VITESSE_VSC73XX is not set
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_PTP_CLASSIFY=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NR_CPUS=4
-CONFIG_NVMEM=y
-# CONFIG_NVMEM_IMX_IIM is not set
-CONFIG_NVMEM_IMX_OCOTP=y
-# CONFIG_NVMEM_SNVS_LPGPR is not set
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_DW=y
-CONFIG_PCIE_DW_HOST=y
-CONFIG_PCIE_DW_PLAT=y
-CONFIG_PCIE_DW_PLAT_HOST=y
-CONFIG_PCIE_PME=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_IMX6=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-# CONFIG_PCI_V3_SEMI is not set
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_IMX=y
-CONFIG_PINCTRL_IMX6Q=y
-CONFIG_PINCTRL_IMX6SL=y
-CONFIG_PINCTRL_IMX6SX=y
-CONFIG_PINCTRL_IMX6UL=y
-# CONFIG_PL310_ERRATA_588369 is not set
-# CONFIG_PL310_ERRATA_727915 is not set
-# CONFIG_PL310_ERRATA_753970 is not set
-CONFIG_PL310_ERRATA_769419=y
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_GENERIC_DOMAINS=y
-CONFIG_PM_GENERIC_DOMAINS_OF=y
-CONFIG_PM_OPP=y
-CONFIG_PPS=y
-CONFIG_PTP_1588_CLOCK=y
-CONFIG_PWM=y
-CONFIG_PWM_IMX=y
-CONFIG_PWM_SYSFS=y
-CONFIG_RAS=y
-CONFIG_RATIONAL=y
-CONFIG_RCU_NEED_SEGCBLIST=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_GZIP=y
-CONFIG_RD_LZO=y
-CONFIG_RD_XZ=y
-CONFIG_REFCOUNT_FULL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_ANATOP=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_LTC3676=y
-CONFIG_REGULATOR_PFUZE100=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_DRV_CMOS is not set
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_RTC_DRV_DS1672=y
-# CONFIG_RTC_DRV_IMXDI is not set
-# CONFIG_RTC_DRV_MXC is not set
-# CONFIG_RTC_DRV_MXC_V2 is not set
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SCSI=y
-CONFIG_SENSORS_AD7418=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SG_POOL=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SOC_BUS=y
-# CONFIG_SOC_IMX50 is not set
-# CONFIG_SOC_IMX51 is not set
-# CONFIG_SOC_IMX53 is not set
-CONFIG_SOC_IMX6=y
-CONFIG_SOC_IMX6Q=y
-CONFIG_SOC_IMX6SL=y
-# CONFIG_SOC_IMX6SLL is not set
-CONFIG_SOC_IMX6SX=y
-CONFIG_SOC_IMX6UL=y
-# CONFIG_SOC_IMX7D is not set
-# CONFIG_SOC_LS1021A is not set
-# CONFIG_SOC_VF610 is not set
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-# CONFIG_SPI_FSL_LPSPI is not set
-CONFIG_SPI_IMX=y
-CONFIG_SPI_MASTER=y
-CONFIG_SRAM=y
-CONFIG_SRAM_EXEC=y
-CONFIG_SRCU=y
-CONFIG_STMP_DEVICE=y
-CONFIG_SWPHY=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_OF=y
-# CONFIG_THUMB2_KERNEL is not set
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_USB=y
-CONFIG_USB_CHIPIDEA=y
-CONFIG_USB_CHIPIDEA_HOST=y
-CONFIG_USB_CHIPIDEA_OF=y
-CONFIG_USB_CHIPIDEA_UDC=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_HCD_PLATFORM is not set
-# CONFIG_USB_EHCI_MXC is not set
-CONFIG_USB_GADGET=y
-CONFIG_USB_MXS_PHY=y
-CONFIG_USB_OTG=y
-CONFIG_USB_PHY=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ULPI_BUS=y
-CONFIG_USE_OF=y
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_VMSPLIT_2G=y
-# CONFIG_VMSPLIT_3G is not set
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
+++ /dev/null
-From 125120298dc05bb55a8874f07aa3f4bb6056bfb3 Mon Sep 17 00:00:00 2001
-From: Robert Jones <rjones@gateworks.com>
-Date: Wed, 8 Jan 2020 07:44:21 -0800
-Subject: [PATCH 1/4] ARM: dts: imx: Add GW5907 board support
-
-The Gateworks GW5907 is an IMX6 SoC based single board computer with:
- - IMX6Q or IMX6DL
- - 32bit DDR3 DRAM
- - FEC GbE Phy
- - bi-color front-panel LED
- - 256MB NAND boot device
- - Gateworks System Controller (hwmon, pushbutton controller, EEPROM)
- - Digital IO expander (pca9555)
- - Joystick 12bit adc (ads1015)
-
-Signed-off-by: Robert Jones <rjones@gateworks.com>
-Reviewed-by: Tim Harvey <tharvey@gateworks.com>
-Signed-off-by: Shawn Guo <shawnguo@kernel.org>
----
- arch/arm/boot/dts/Makefile | 2 +
- arch/arm/boot/dts/imx6dl-gw5907.dts | 14 ++
- arch/arm/boot/dts/imx6q-gw5907.dts | 14 ++
- arch/arm/boot/dts/imx6qdl-gw5907.dtsi | 399 ++++++++++++++++++++++++++++++++++
- 4 files changed, 429 insertions(+)
- create mode 100644 arch/arm/boot/dts/imx6dl-gw5907.dts
- create mode 100644 arch/arm/boot/dts/imx6q-gw5907.dts
- create mode 100644 arch/arm/boot/dts/imx6qdl-gw5907.dtsi
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -404,6 +404,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
- imx6dl-gw560x.dtb \
- imx6dl-gw5903.dtb \
- imx6dl-gw5904.dtb \
-+ imx6dl-gw5907.dtb \
- imx6dl-hummingboard.dtb \
- imx6dl-hummingboard-emmc-som-v15.dtb \
- imx6dl-hummingboard-som-v15.dtb \
-@@ -471,6 +472,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
- imx6q-gw560x.dtb \
- imx6q-gw5903.dtb \
- imx6q-gw5904.dtb \
-+ imx6q-gw5907.dtb \
- imx6q-h100.dtb \
- imx6q-hummingboard.dtb \
- imx6q-hummingboard-emmc-som-v15.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6dl-gw5907.dts
-@@ -0,0 +1,14 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright 2019 Gateworks Corporation
-+ */
-+
-+/dts-v1/;
-+
-+#include "imx6dl.dtsi"
-+#include "imx6qdl-gw5907.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 DualLite/Solo GW5907";
-+ compatible = "gw,imx6dl-gw5907", "gw,ventana", "fsl,imx6dl";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6q-gw5907.dts
-@@ -0,0 +1,14 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright 2019 Gateworks Corporation
-+ */
-+
-+/dts-v1/;
-+
-+#include "imx6q.dtsi"
-+#include "imx6qdl-gw5907.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 Dual/Quad GW5907";
-+ compatible = "gw,imx6q-gw5907", "gw,ventana", "fsl,imx6q";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
-@@ -0,0 +1,399 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright 2019 Gateworks Corporation
-+ */
-+
-+#include <dt-bindings/gpio/gpio.h>
-+
-+/ {
-+ /* these are used by bootloader for disabling nodes */
-+ aliases {
-+ led0 = &led0;
-+ led1 = &led1;
-+ nand = &gpmi;
-+ usb0 = &usbh1;
-+ usb1 = &usbotg;
-+ };
-+
-+ chosen {
-+ stdout-path = &uart2;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_gpio_leds>;
-+
-+ led0: user1 {
-+ label = "user1";
-+ gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
-+ default-state = "on";
-+ linux,default-trigger = "heartbeat";
-+ };
-+
-+ led1: user2 {
-+ label = "user2";
-+ gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
-+ default-state = "off";
-+ };
-+ };
-+
-+ memory@10000000 {
-+ device_type = "memory";
-+ reg = <0x10000000 0x20000000>;
-+ };
-+
-+ pps {
-+ compatible = "pps-gpio";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pps>;
-+ gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-+ status = "okay";
-+ };
-+
-+ reg_3p3v: regulator-3p3v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "3P3V";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_5p0v: regulator-5p0v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "5P0V";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_usb_otg_vbus: regulator-usb-otg-vbus {
-+ compatible = "regulator-fixed";
-+ regulator-name = "usb_otg_vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-+ enable-active-high;
-+ };
-+};
-+
-+&fec {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_enet>;
-+ phy-mode = "rgmii-id";
-+ phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
-+ status = "okay";
-+};
-+
-+&gpmi {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_gpmi_nand>;
-+ status = "okay";
-+};
-+
-+&hdmi {
-+ ddc-i2c-bus = <&i2c3>;
-+ status = "okay";
-+};
-+
-+&i2c1 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c1>;
-+ status = "okay";
-+
-+ gpio@23 {
-+ compatible = "nxp,pca9555";
-+ reg = <0x23>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ };
-+
-+ eeprom@50 {
-+ compatible = "atmel,24c02";
-+ reg = <0x50>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom@51 {
-+ compatible = "atmel,24c02";
-+ reg = <0x51>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom@52 {
-+ compatible = "atmel,24c02";
-+ reg = <0x52>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom@53 {
-+ compatible = "atmel,24c02";
-+ reg = <0x53>;
-+ pagesize = <16>;
-+ };
-+
-+ rtc@68 {
-+ compatible = "dallas,ds1672";
-+ reg = <0x68>;
-+ };
-+};
-+
-+&i2c2 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c2>;
-+ status = "okay";
-+};
-+
-+&i2c3 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c3>;
-+ status = "okay";
-+
-+ gpio@20 {
-+ compatible = "nxp,pca9555";
-+ reg = <0x20>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ };
-+
-+ adc@48 {
-+ compatible = "ti,ads1015";
-+ reg = <0x48>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ channel@4 {
-+ reg = <4>;
-+ ti,gain = <0>;
-+ ti,datarate = <5>;
-+ };
-+
-+ channel@5 {
-+ reg = <5>;
-+ ti,gain = <0>;
-+ ti,datarate = <5>;
-+ };
-+
-+ channel@6 {
-+ reg = <6>;
-+ ti,gain = <0>;
-+ ti,datarate = <5>;
-+ };
-+ };
-+};
-+
-+&pcie {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pcie>;
-+ reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
-+ status = "okay";
-+};
-+
-+&pwm2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
-+ status = "disabled";
-+};
-+
-+&pwm3 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
-+ status = "disabled";
-+};
-+
-+&pwm4 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
-+ status = "disabled";
-+};
-+
-+&uart1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart1>;
-+ status = "okay";
-+};
-+
-+&uart2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart2>;
-+ status = "okay";
-+};
-+
-+&uart3 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart3>;
-+ status = "okay";
-+};
-+
-+&uart5 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart5>;
-+ status = "okay";
-+};
-+
-+&usbotg {
-+ vbus-supply = <®_usb_otg_vbus>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usbotg>;
-+ disable-over-current;
-+ status = "okay";
-+};
-+
-+&usbh1 {
-+ status = "okay";
-+};
-+
-+&wdog1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_wdog>;
-+ fsl,ext-reset-output;
-+};
-+
-+&iomuxc {
-+ pinctrl_enet: enetgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
-+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
-+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
-+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
-+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
-+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
-+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
-+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
-+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
-+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
-+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
-+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
-+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
-+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
-+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
-+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
-+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0
-+ >;
-+ };
-+
-+ pinctrl_gpio_leds: gpioledsgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
-+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
-+ >;
-+ };
-+
-+ pinctrl_gpmi_nand: gpminandgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
-+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
-+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
-+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
-+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
-+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
-+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
-+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
-+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
-+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
-+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
-+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
-+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
-+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
-+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
-+ >;
-+ };
-+
-+ pinctrl_i2c1: i2c1grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
-+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
-+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0
-+ >;
-+ };
-+
-+ pinctrl_i2c2: i2c2grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-+ >;
-+ };
-+
-+ pinctrl_i2c3: i2c3grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
-+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
-+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
-+ MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0
-+ >;
-+ };
-+
-+ pinctrl_pcie: pciegrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
-+ >;
-+ };
-+
-+ pinctrl_pps: ppsgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_pwm2: pwm2grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_pwm3: pwm3grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_pwm4: pwm4grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart1: uart1grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart2: uart2grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart3: uart3grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart5: uart5grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_usbotg: usbotggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
-+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0
-+ >;
-+ };
-+
-+ pinctrl_wdog: wdoggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
-+ >;
-+ };
-+};
+++ /dev/null
-From a1fb69366bb16753f0fba6a891fbef5cdd97cfbe Mon Sep 17 00:00:00 2001
-From: Tim Harvey <tharvey@gateworks.com>
-Date: Wed, 8 Jan 2020 07:44:22 -0800
-Subject: [PATCH 2/4] ARM: dts: imx: Add GW5910 board support
-
-The Gateworks GW5910 is an IMX6 SoC based single board computer with:
- - IMX6Q or IMX6DL
- - 32bit DDR3 DRAM
- - FEC GbE RJ45 front-panel
- - 1x miniPCIe socket with PCI Gen2, USB2
- - 1x miniPCIe socket with PCI Gen2, USB2, nanoSIM
- - 5V to 60V DC input barrel jack
- - 3axis accelerometer (lis2de12)
- - GPS (ublox ZOE-M8Q)
- - bi-color front-panel LED
- - 256MB NAND boot device
- - microSD socket (with UHS-I support)
- - user pushbutton
- - Gateworks System Controller (hwmon, pushbutton controller, EEPROM)
- - Dual-Band Wireless MCU (CC1352, UART/I2S interrconnect to IMX6)
- - WiFi/Bluetooth/BLE module (Sterling-LSW, SDIO/UART interconnect to IMX6)
- - RS232 transceiver (1x UART with flow-control or 2x UART (build option)
- - off-board SPI connector (1x chip-select)
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
-Signed-off-by: Robert Jones <rjones@gateworks.com>
-Signed-off-by: Shawn Guo <shawnguo@kernel.org>
----
- arch/arm/boot/dts/Makefile | 2 +
- arch/arm/boot/dts/imx6dl-gw5910.dts | 14 +
- arch/arm/boot/dts/imx6q-gw5910.dts | 14 +
- arch/arm/boot/dts/imx6qdl-gw5910.dtsi | 491 ++++++++++++++++++++++++++++++++++
- 4 files changed, 521 insertions(+)
- create mode 100644 arch/arm/boot/dts/imx6dl-gw5910.dts
- create mode 100644 arch/arm/boot/dts/imx6q-gw5910.dts
- create mode 100644 arch/arm/boot/dts/imx6qdl-gw5910.dtsi
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -405,6 +405,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
- imx6dl-gw5903.dtb \
- imx6dl-gw5904.dtb \
- imx6dl-gw5907.dtb \
-+ imx6dl-gw5910.dtb \
- imx6dl-hummingboard.dtb \
- imx6dl-hummingboard-emmc-som-v15.dtb \
- imx6dl-hummingboard-som-v15.dtb \
-@@ -473,6 +474,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
- imx6q-gw5903.dtb \
- imx6q-gw5904.dtb \
- imx6q-gw5907.dtb \
-+ imx6q-gw5910.dtb \
- imx6q-h100.dtb \
- imx6q-hummingboard.dtb \
- imx6q-hummingboard-emmc-som-v15.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6dl-gw5910.dts
-@@ -0,0 +1,14 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright 2019 Gateworks Corporation
-+ */
-+
-+/dts-v1/;
-+
-+#include "imx6dl.dtsi"
-+#include "imx6qdl-gw5910.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 DualLite/Solo GW5910";
-+ compatible = "gw,imx6dl-gw5910", "gw,ventana", "fsl,imx6dl";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6q-gw5910.dts
-@@ -0,0 +1,14 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright 2019 Gateworks Corporation
-+ */
-+
-+/dts-v1/;
-+
-+#include "imx6q.dtsi"
-+#include "imx6qdl-gw5910.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 Dual/Quad GW5910";
-+ compatible = "gw,imx6q-gw5910", "gw,ventana", "fsl,imx6q";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
-@@ -0,0 +1,491 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright 2019 Gateworks Corporation
-+ */
-+
-+#include <dt-bindings/gpio/gpio.h>
-+
-+/ {
-+ /* these are used by bootloader for disabling nodes */
-+ aliases {
-+ led0 = &led0;
-+ led1 = &led1;
-+ led2 = &led2;
-+ };
-+
-+ chosen {
-+ stdout-path = &uart2;
-+ };
-+
-+ memory@10000000 {
-+ device_type = "memory";
-+ reg = <0x10000000 0x20000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_gpio_leds>;
-+
-+ led0: user1 {
-+ label = "user1";
-+ gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
-+ default-state = "on";
-+ linux,default-trigger = "heartbeat";
-+ };
-+
-+ led1: user2 {
-+ label = "user2";
-+ gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
-+ default-state = "off";
-+ };
-+
-+ led2: user3 {
-+ label = "user3";
-+ gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
-+ default-state = "off";
-+ };
-+ };
-+
-+ pps {
-+ compatible = "pps-gpio";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pps>;
-+ gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
-+ status = "okay";
-+ };
-+
-+ reg_3p3v: regulator-3p3v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "3P3V";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_5p0v: regulator-5p0v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "5P0V";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_wl: regulator-wl {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_reg_wl>;
-+ compatible = "regulator-fixed";
-+ regulator-name = "wl";
-+ gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-+ startup-delay-us = <100>;
-+ enable-active-high;
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_bt: regulator-bt {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_reg_bt>;
-+ compatible = "regulator-fixed";
-+ regulator-name = "bt";
-+ gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-+ startup-delay-us = <100>;
-+ enable-active-high;
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+};
-+
-+
-+&ecspi3 {
-+ cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_ecspi3>;
-+ status = "okay";
-+};
-+
-+&fec {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_enet>;
-+ phy-mode = "rgmii-id";
-+ status = "okay";
-+};
-+
-+&gpmi {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_gpmi_nand>;
-+ status = "okay";
-+};
-+
-+&i2c1 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c1>;
-+ status = "okay";
-+
-+ gpio@23 {
-+ compatible = "nxp,pca9555";
-+ reg = <0x23>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ };
-+
-+ eeprom@50 {
-+ compatible = "atmel,24c02";
-+ reg = <0x50>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom@51 {
-+ compatible = "atmel,24c02";
-+ reg = <0x51>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom@52 {
-+ compatible = "atmel,24c02";
-+ reg = <0x52>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom@53 {
-+ compatible = "atmel,24c02";
-+ reg = <0x53>;
-+ pagesize = <16>;
-+ };
-+
-+ rtc@68 {
-+ compatible = "dallas,ds1672";
-+ reg = <0x68>;
-+ };
-+};
-+
-+&i2c2 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c2>;
-+ status = "okay";
-+};
-+
-+&i2c3 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c3>;
-+ status = "okay";
-+
-+ accel@19 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_accel>;
-+ compatible = "st,lis2de12";
-+ reg = <0x19>;
-+ st,drdy-int-pin = <1>;
-+ interrupt-parent = <&gpio7>;
-+ interrupts = <13 0>;
-+ interrupt-names = "INT1";
-+ };
-+};
-+
-+&pcie {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pcie>;
-+ reset-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
-+ status = "okay";
-+};
-+
-+&pwm2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
-+ status = "disabled";
-+};
-+
-+&pwm3 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
-+ status = "disabled";
-+};
-+
-+/* off-board RS232 */
-+&uart1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart1>;
-+ status = "okay";
-+};
-+
-+/* serial console */
-+&uart2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart2>;
-+ status = "okay";
-+};
-+
-+/* Sterling-LWB Bluetooth */
-+&uart4 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart4>;
-+ uart-has-rtscts;
-+ status = "okay";
-+};
-+
-+/* GPS */
-+&uart5 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart5>;
-+ status = "okay";
-+};
-+
-+&usbotg {
-+ vbus-supply = <®_5p0v>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usbotg>;
-+ disable-over-current;
-+ status = "okay";
-+};
-+
-+&usbh1 {
-+ status = "okay";
-+};
-+
-+/* Sterling-LWB SDIO WiFi */
-+&usdhc2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usdhc2>;
-+ vmmc-supply = <®_3p3v>;
-+ non-removable;
-+ bus-width = <4>;
-+ status = "okay";
-+};
-+
-+&usdhc3 {
-+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
-+ pinctrl-0 = <&pinctrl_usdhc3>;
-+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-+ cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-+ vmmc-supply = <®_3p3v>;
-+ status = "okay";
-+};
-+
-+&wdog1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_wdog>;
-+ fsl,ext-reset-output;
-+};
-+
-+&iomuxc {
-+ pinctrl_accel: accelmuxgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_ecspi3: escpi3grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
-+ MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
-+ MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
-+ MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x100b1
-+ >;
-+ };
-+
-+ pinctrl_enet: enetgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
-+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
-+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
-+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
-+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
-+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
-+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
-+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
-+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
-+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
-+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
-+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
-+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
-+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
-+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
-+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
-+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0
-+ >;
-+ };
-+
-+ pinctrl_gpio_leds: gpioledsgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
-+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
-+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
-+ >;
-+ };
-+
-+ pinctrl_gpmi_nand: gpminandgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
-+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
-+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
-+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
-+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
-+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
-+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
-+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
-+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
-+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
-+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
-+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
-+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
-+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
-+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
-+ >;
-+ };
-+
-+ pinctrl_i2c1: i2c1grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
-+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
-+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0
-+ >;
-+ };
-+
-+ pinctrl_i2c2: i2c2grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-+ >;
-+ };
-+
-+ pinctrl_i2c3: i2c3grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
-+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
-+ >;
-+ };
-+
-+ pinctrl_pcie: pciegrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b0
-+ >;
-+ };
-+
-+ pinctrl_pps: ppsgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_pwm2: pwm2grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_pwm3: pwm3grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_reg_bt: regbtgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_reg_wl: regwlgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart1: uart1grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart2: uart2grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart4: uart4grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
-+ MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
-+ MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart5: uart5grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_usbotg: usbotggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059
-+ >;
-+ };
-+
-+ pinctrl_usdhc2: usdhc2grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
-+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
-+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
-+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
-+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
-+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
-+ >;
-+ };
-+
-+ pinctrl_usdhc3: usdhc3grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
-+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
-+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
-+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
-+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
-+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
-+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */
-+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059
-+ >;
-+ };
-+
-+ pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
-+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x170b9
-+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
-+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
-+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
-+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
-+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */
-+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9
-+ >;
-+ };
-+
-+ pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
-+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
-+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
-+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
-+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
-+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
-+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */
-+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9
-+ >;
-+ };
-+
-+ pinctrl_wdog: wdoggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
-+ >;
-+ };
-+};
+++ /dev/null
-From 169e12f99cf9d5fce752564f32fd8df96461de43 Mon Sep 17 00:00:00 2001
-From: Robert Jones <rjones@gateworks.com>
-Date: Wed, 8 Jan 2020 07:44:23 -0800
-Subject: [PATCH 3/4] ARM: dts: imx: Add GW5913 board support
-
-The Gateworks GW5913 is an IMX6 SoC based single board computer with:
- - IMX6Q or IMX6DL
- - 32bit DDR3 DRAM
- - FEC GbE RJ45 front-panel
- - 1x miniPCIe socket with PCI Gen2, USB2
- - 1x miniPCIe socket with PCI Gen2, USB2, nanoSIM
- - 6V to 60V DC input connector
- - GPS (ublox ZOE-M8Q)
- - bi-color front-panel LED
- - 256MB NAND boot device
- - nanoSIM socket
- - user pushbutton
- - Gateworks System Controller (hwmon, pushbutton controller, EEPROM)
-
-Signed-off-by: Robert Jones <rjones@gateworks.com>
-Reviewed-by: Tim Harvey <tharvey@gateworks.com>
-Signed-off-by: Shawn Guo <shawnguo@kernel.org>
----
- arch/arm/boot/dts/Makefile | 2 +
- arch/arm/boot/dts/imx6dl-gw5913.dts | 14 ++
- arch/arm/boot/dts/imx6q-gw5913.dts | 14 ++
- arch/arm/boot/dts/imx6qdl-gw5913.dtsi | 348 ++++++++++++++++++++++++++++++++++
- 4 files changed, 378 insertions(+)
- create mode 100644 arch/arm/boot/dts/imx6dl-gw5913.dts
- create mode 100644 arch/arm/boot/dts/imx6q-gw5913.dts
- create mode 100644 arch/arm/boot/dts/imx6qdl-gw5913.dtsi
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -406,6 +406,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
- imx6dl-gw5904.dtb \
- imx6dl-gw5907.dtb \
- imx6dl-gw5910.dtb \
-+ imx6dl-gw5913.dtb \
- imx6dl-hummingboard.dtb \
- imx6dl-hummingboard-emmc-som-v15.dtb \
- imx6dl-hummingboard-som-v15.dtb \
-@@ -475,6 +476,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
- imx6q-gw5904.dtb \
- imx6q-gw5907.dtb \
- imx6q-gw5910.dtb \
-+ imx6q-gw5913.dtb \
- imx6q-h100.dtb \
- imx6q-hummingboard.dtb \
- imx6q-hummingboard-emmc-som-v15.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6dl-gw5913.dts
-@@ -0,0 +1,14 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright 2019 Gateworks Corporation
-+ */
-+
-+/dts-v1/;
-+
-+#include "imx6dl.dtsi"
-+#include "imx6qdl-gw5913.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 DualLite/Solo GW5913";
-+ compatible = "gw,imx6dl-gw5913", "gw,ventana", "fsl,imx6dl";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6q-gw5913.dts
-@@ -0,0 +1,14 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright 2019 Gateworks Corporation
-+ */
-+
-+/dts-v1/;
-+
-+#include "imx6q.dtsi"
-+#include "imx6qdl-gw5913.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 Dual/Quad GW5913";
-+ compatible = "gw,imx6q-gw5913", "gw,ventana", "fsl,imx6q";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
-@@ -0,0 +1,348 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright 2019 Gateworks Corporation
-+ */
-+
-+#include <dt-bindings/gpio/gpio.h>
-+
-+/ {
-+ /* these are used by bootloader for disabling nodes */
-+ aliases {
-+ led0 = &led0;
-+ led1 = &led1;
-+ nand = &gpmi;
-+ usb0 = &usbh1;
-+ usb1 = &usbotg;
-+ };
-+
-+ chosen {
-+ stdout-path = &uart2;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_gpio_leds>;
-+
-+ led0: user1 {
-+ label = "user1";
-+ gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
-+ default-state = "on";
-+ linux,default-trigger = "heartbeat";
-+ };
-+
-+ led1: user2 {
-+ label = "user2";
-+ gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
-+ default-state = "off";
-+ };
-+ };
-+
-+ memory@10000000 {
-+ device_type = "memory";
-+ reg = <0x10000000 0x20000000>;
-+ };
-+
-+ pps {
-+ compatible = "pps-gpio";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pps>;
-+ gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
-+ status = "okay";
-+ };
-+
-+ reg_3p3v: regulator-3p3v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "3P3V";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_5p0v: regulator-5p0v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "5P0V";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ regulator-always-on;
-+ };
-+};
-+
-+&fec {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_enet>;
-+ phy-mode = "rgmii-id";
-+ status = "okay";
-+};
-+
-+&gpmi {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_gpmi_nand>;
-+ status = "okay";
-+};
-+
-+&i2c1 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c1>;
-+ status = "okay";
-+
-+ gpio@23 {
-+ compatible = "nxp,pca9555";
-+ reg = <0x23>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ };
-+
-+ eeprom@50 {
-+ compatible = "atmel,24c02";
-+ reg = <0x50>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom@51 {
-+ compatible = "atmel,24c02";
-+ reg = <0x51>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom@52 {
-+ compatible = "atmel,24c02";
-+ reg = <0x52>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom@53 {
-+ compatible = "atmel,24c02";
-+ reg = <0x53>;
-+ pagesize = <16>;
-+ };
-+
-+ rtc@68 {
-+ compatible = "dallas,ds1672";
-+ reg = <0x68>;
-+ };
-+};
-+
-+&i2c2 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c2>;
-+ status = "okay";
-+};
-+
-+&i2c3 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c3>;
-+ status = "okay";
-+};
-+
-+&pcie {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pcie>;
-+ reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
-+ status = "okay";
-+};
-+
-+&pwm2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
-+ status = "disabled";
-+};
-+
-+&pwm3 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
-+ status = "disabled";
-+};
-+
-+&pwm4 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
-+ status = "disabled";
-+};
-+
-+&uart1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart1>;
-+ status = "okay";
-+};
-+
-+&uart2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart2>;
-+ status = "okay";
-+};
-+
-+&uart3 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart3>;
-+ status = "okay";
-+};
-+
-+&uart5 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart5>;
-+ status = "okay";
-+};
-+
-+&usbotg {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usbotg>;
-+ disable-over-current;
-+ status = "okay";
-+};
-+
-+&usbh1 {
-+ status = "okay";
-+};
-+
-+&wdog1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_wdog>;
-+ fsl,ext-reset-output;
-+};
-+
-+&iomuxc {
-+ pinctrl_enet: enetgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
-+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
-+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
-+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
-+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
-+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
-+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
-+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
-+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
-+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
-+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
-+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
-+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
-+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
-+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
-+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
-+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0
-+ >;
-+ };
-+
-+ pinctrl_gpio_leds: gpioledsgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
-+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
-+ >;
-+ };
-+
-+ pinctrl_gpmi_nand: gpminandgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
-+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
-+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
-+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
-+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
-+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
-+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
-+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
-+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
-+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
-+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
-+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
-+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
-+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
-+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
-+ >;
-+ };
-+
-+ pinctrl_i2c1: i2c1grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
-+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
-+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0
-+ >;
-+ };
-+
-+ pinctrl_i2c2: i2c2grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-+ >;
-+ };
-+
-+ pinctrl_i2c3: i2c3grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
-+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
-+ >;
-+ };
-+
-+ pinctrl_pcie: pciegrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
-+ >;
-+ };
-+
-+ pinctrl_pps: ppsgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_pwm2: pwm2grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_pwm3: pwm3grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_pwm4: pwm4grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart1: uart1grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart2: uart2grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart3: uart3grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart5: uart5grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_usbotg: usbotggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
-+ >;
-+ };
-+
-+ pinctrl_wdog: wdoggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
-+ >;
-+ };
-+};
+++ /dev/null
-From 9a820b55817011f53771e6bfebae5fe059f0a534 Mon Sep 17 00:00:00 2001
-From: Robert Jones <rjones@gateworks.com>
-Date: Wed, 8 Jan 2020 07:44:24 -0800
-Subject: [PATCH 4/4] ARM: dts: imx: Add GW5912 board support
-
-The Gateworks GW5912 is an IMX6 SoC based single board computer with:
- - IMX6Q or IMX6DL
- - 32bit DDR3 DRAM
- - GbE RJ45 front-panel
- - 4x miniPCIe socket with PCI Gen2, USB2
- - 1x miniPCIe socket with PCI Gen2, USB2, mSATA
- - 1x miniPCIe socket with PCI Gen2, USB2, mezzanine
- - 10V to 60V DC input barrel jack
- - 3axis accelerometer (lis2de12)
- - GPS (ublox ZOE-M8Q)
- - bi-color front-panel LED
- - 256MB NAND boot device
- - nanoSIM/microSD socket (with UHS-I support)
- - user pushbutton
- - Gateworks System Controller (hwmon, pushbutton controller, EEPROM)
- - CAN Bus transceiver (mcp2562)
- - RS232 transceiver (1x UART with flow-control or 2x UART (build option)
- - off-board SPI connector (1x chip-select)
-
-Signed-off-by: Robert Jones <rjones@gateworks.com>
-Reviewed-by: Tim Harvey <tharvey@gateworks.com>
-Signed-off-by: Shawn Guo <shawnguo@kernel.org>
----
- arch/arm/boot/dts/Makefile | 2 +
- arch/arm/boot/dts/imx6dl-gw5912.dts | 13 +
- arch/arm/boot/dts/imx6q-gw5912.dts | 13 +
- arch/arm/boot/dts/imx6qdl-gw5912.dtsi | 461 ++++++++++++++++++++++++++++++++++
- 4 files changed, 489 insertions(+)
- create mode 100644 arch/arm/boot/dts/imx6dl-gw5912.dts
- create mode 100644 arch/arm/boot/dts/imx6q-gw5912.dts
- create mode 100644 arch/arm/boot/dts/imx6qdl-gw5912.dtsi
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -406,6 +406,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
- imx6dl-gw5904.dtb \
- imx6dl-gw5907.dtb \
- imx6dl-gw5910.dtb \
-+ imx6dl-gw5912.dtb \
- imx6dl-gw5913.dtb \
- imx6dl-hummingboard.dtb \
- imx6dl-hummingboard-emmc-som-v15.dtb \
-@@ -476,6 +477,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
- imx6q-gw5904.dtb \
- imx6q-gw5907.dtb \
- imx6q-gw5910.dtb \
-+ imx6q-gw5912.dtb \
- imx6q-gw5913.dtb \
- imx6q-h100.dtb \
- imx6q-hummingboard.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6dl-gw5912.dts
-@@ -0,0 +1,13 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright 2019 Gateworks Corporation
-+ */
-+
-+/dts-v1/;
-+#include "imx6dl.dtsi"
-+#include "imx6qdl-gw5912.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 DualLite/Solo GW5912";
-+ compatible = "gw,imx6dl-gw5912", "gw,ventana", "fsl,imx6dl";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6q-gw5912.dts
-@@ -0,0 +1,13 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright 2019 Gateworks Corporation
-+ */
-+
-+/dts-v1/;
-+#include "imx6q.dtsi"
-+#include "imx6qdl-gw5912.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 Dual/Quad GW5912";
-+ compatible = "gw,imx6q-gw5912", "gw,ventana", "fsl,imx6q";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
-@@ -0,0 +1,461 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright 2019 Gateworks Corporation
-+ */
-+
-+#include <dt-bindings/gpio/gpio.h>
-+
-+/ {
-+ /* these are used by bootloader for disabling nodes */
-+ aliases {
-+ led0 = &led0;
-+ led1 = &led1;
-+ led2 = &led2;
-+ nand = &gpmi;
-+ usb0 = &usbh1;
-+ usb1 = &usbotg;
-+ };
-+
-+ chosen {
-+ stdout-path = &uart2;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_gpio_leds>;
-+
-+ led0: user1 {
-+ label = "user1";
-+ gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
-+ default-state = "on";
-+ linux,default-trigger = "heartbeat";
-+ };
-+
-+ led1: user2 {
-+ label = "user2";
-+ gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
-+ default-state = "off";
-+ };
-+
-+ led2: user3 {
-+ label = "user3";
-+ gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
-+ default-state = "off";
-+ };
-+ };
-+
-+ memory@10000000 {
-+ device_type = "memory";
-+ reg = <0x10000000 0x40000000>;
-+ };
-+
-+ pps {
-+ compatible = "pps-gpio";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pps>;
-+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ reg_3p3v: regulator-3p3v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "3P3V";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_usb_vbus: regulator-5p0v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "usb_vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ regulator-always-on;
-+ };
-+};
-+
-+&can1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_flexcan1>;
-+ status = "okay";
-+};
-+
-+&ecspi2 {
-+ cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_ecspi2>;
-+ status = "okay";
-+};
-+
-+&fec {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_enet>;
-+ phy-mode = "rgmii-id";
-+ status = "okay";
-+};
-+
-+&gpmi {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_gpmi_nand>;
-+ status = "okay";
-+};
-+
-+&i2c1 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c1>;
-+ status = "okay";
-+
-+ gpio@23 {
-+ compatible = "nxp,pca9555";
-+ reg = <0x23>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ };
-+
-+ eeprom@50 {
-+ compatible = "atmel,24c02";
-+ reg = <0x50>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom@51 {
-+ compatible = "atmel,24c02";
-+ reg = <0x51>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom@52 {
-+ compatible = "atmel,24c02";
-+ reg = <0x52>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom@53 {
-+ compatible = "atmel,24c02";
-+ reg = <0x53>;
-+ pagesize = <16>;
-+ };
-+
-+ rtc@68 {
-+ compatible = "dallas,ds1672";
-+ reg = <0x68>;
-+ };
-+};
-+
-+&i2c2 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c2>;
-+ status = "okay";
-+};
-+
-+&i2c3 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c3>;
-+ status = "okay";
-+
-+ accel@19 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_accel>;
-+ compatible = "st,lis2de12";
-+ reg = <0x19>;
-+ st,drdy-int-pin = <1>;
-+ interrupt-parent = <&gpio7>;
-+ interrupts = <13 0>;
-+ interrupt-names = "INT1";
-+ };
-+};
-+
-+&pcie {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pcie>;
-+ reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
-+ status = "okay";
-+};
-+
-+&pwm1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pwm1>; /* MX6_DIO0 */
-+ status = "disabled";
-+};
-+
-+&pwm2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
-+ status = "disabled";
-+};
-+
-+&pwm3 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
-+ status = "disabled";
-+};
-+
-+&pwm4 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
-+ status = "disabled";
-+};
-+
-+&uart1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart1>;
-+ rts-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
-+ status = "okay";
-+};
-+
-+&uart2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart2>;
-+ status = "okay";
-+};
-+
-+&uart5 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart5>;
-+ status = "okay";
-+};
-+
-+&usbotg {
-+ vbus-supply = <®_usb_vbus>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usbotg>;
-+ disable-over-current;
-+ dr_mode = "host";
-+ status = "okay";
-+};
-+
-+&usbh1 {
-+ vbus-supply = <®_usb_vbus>;
-+ status = "okay";
-+};
-+
-+&usdhc3 {
-+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
-+ pinctrl-0 = <&pinctrl_usdhc3>;
-+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-+ cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-+ vmmc-supply = <®_3p3v>;
-+ no-1-8-v; /* firmware will remove if board revision supports */
-+ status = "okay";
-+};
-+
-+&wdog1 {
-+ status = "disabled";
-+};
-+
-+&wdog2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_wdog>;
-+ fsl,ext-reset-output;
-+ status = "okay";
-+};
-+
-+&iomuxc {
-+ pinctrl_accel: accelmuxgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_enet: enetgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
-+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
-+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
-+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
-+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
-+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
-+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
-+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
-+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
-+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
-+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
-+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
-+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
-+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
-+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
-+ >;
-+ };
-+
-+ pinctrl_ecspi2: escpi2grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
-+ MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
-+ MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
-+ MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x100b1
-+ >;
-+ };
-+
-+ pinctrl_flexcan1: flexcan1grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1
-+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1
-+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0
-+ >;
-+ };
-+
-+ pinctrl_gpio_leds: gpioledsgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
-+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
-+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
-+ >;
-+ };
-+
-+ pinctrl_gpmi_nand: gpminandgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
-+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
-+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
-+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
-+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
-+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
-+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
-+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
-+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
-+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
-+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
-+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
-+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
-+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
-+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
-+ >;
-+ };
-+
-+ pinctrl_i2c1: i2c1grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
-+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
-+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0
-+ >;
-+ };
-+
-+ pinctrl_i2c2: i2c2grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-+ >;
-+ };
-+
-+ pinctrl_i2c3: i2c3grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
-+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
-+ >;
-+ };
-+
-+ pinctrl_pcie: pciegrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0
-+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0
-+ >;
-+ };
-+
-+ pinctrl_pps: ppsgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_pwm1: pwm1grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_pwm2: pwm2grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_pwm3: pwm3grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_pwm4: pwm4grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart1: uart1grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
-+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x4001b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart2: uart2grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
-+ MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x4001b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart5: uart5grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_usbotg: usbotggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059
-+ >;
-+ };
-+
-+ pinctrl_usdhc3: usdhc3grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
-+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
-+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
-+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
-+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
-+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
-+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */
-+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059
-+ >;
-+ };
-+
-+ pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
-+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
-+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
-+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
-+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
-+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
-+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */
-+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9
-+ >;
-+ };
-+
-+ pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
-+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
-+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
-+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
-+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
-+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
-+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */
-+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9
-+ >;
-+ };
-+
-+ pinctrl_wdog: wdoggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD1_DAT3__WDOG2_B 0x1b0b0
-+ >;
-+ };
-+};
+++ /dev/null
---- a/arch/arm/boot/dts/imx6dl-wandboard.dts
-+++ b/arch/arm/boot/dts/imx6dl-wandboard.dts
-@@ -15,4 +15,8 @@
- memory@10000000 {
- reg = <0x10000000 0x40000000>;
- };
-+
-+ chosen {
-+ bootargs = "console=ttymxc0,115200";
-+ };
- };
+++ /dev/null
-arm: dts: apalis-ixora: Add status LEDs aliases
-
-Signed-off-by: Petr Štetiar <ynezz@true.cz>
-
---- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts
-+++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
-@@ -60,6 +60,10 @@
- i2c2 = &i2c2;
- rtc0 = &rtc_i2c;
- rtc1 = &snvs_rtc;
-+ led-boot = &led_boot;
-+ led-failsafe = &led_failsafe;
-+ led-running = &led_running;
-+ led-upgrade = &led_upgrade;
- };
-
- chosen {
-@@ -127,22 +131,22 @@
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_leds_ixora>;
-
-- led4-green {
-+ led_running: led4-green {
- label = "LED_4_GREEN";
- gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
- };
-
-- led4-red {
-+ led_upgrade: led4-red {
- label = "LED_4_RED";
- gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
- };
-
-- led5-green {
-+ led_boot: led5-green {
- label = "LED_5_GREEN";
- gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
- };
-
-- led5-red {
-+ led_failsafe: led5-red {
- label = "LED_5_RED";
- gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
- };
---- a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
-+++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
-@@ -61,6 +61,10 @@
- i2c2 = &i2c2;
- rtc0 = &rtc_i2c;
- rtc1 = &snvs_rtc;
-+ led-boot = &led_boot;
-+ led-failsafe = &led_failsafe;
-+ led-running = &led_running;
-+ led-upgrade = &led_upgrade;
- };
-
- chosen {
-@@ -128,22 +132,22 @@
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_leds_ixora>;
-
-- led4-green {
-+ led_running: led4-green {
- label = "LED_4_GREEN";
-- gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
-+ gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
- };
-
-- led4-red {
-+ led_upgrade: led4-red {
- label = "LED_4_RED";
-- gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-+ gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
- };
-
-- led5-green {
-+ led_boot: led5-green {
- label = "LED_5_GREEN";
- gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
- };
-
-- led5-red {
-+ led_failsafe: led5-red {
- label = "LED_5_RED";
- gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
- };
+++ /dev/null
-arm: dts: apalis-ixora: Add switch3 as reset button
-
-Signed-off-by: Petr Štetiar <ynezz@true.cz>
-
---- a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
-+++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
-@@ -74,7 +74,7 @@
- gpio-keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
-- pinctrl-0 = <&pinctrl_gpio_keys>;
-+ pinctrl-0 = <&pinctrl_gpio_keys &pinctrl_switch3_ixora>;
-
- wakeup {
- label = "Wake-Up";
-@@ -83,6 +83,13 @@
- debounce-interval = <10>;
- wakeup-source;
- };
-+
-+ reset {
-+ label = "reset";
-+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_RESTART>;
-+ debounce-interval = <10>;
-+ };
- };
-
- lcd_display: disp0 {
-@@ -296,4 +303,10 @@
- MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
- >;
- };
-+
-+ pinctrl_switch3_ixora: switch3ixora {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0
-+ >;
-+ };
- };
---- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts
-+++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
-@@ -73,7 +73,7 @@
- gpio-keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
-- pinctrl-0 = <&pinctrl_gpio_keys>;
-+ pinctrl-0 = <&pinctrl_gpio_keys &pinctrl_switch3_ixora>;
-
- wakeup {
- label = "Wake-Up";
-@@ -82,6 +82,13 @@
- debounce-interval = <10>;
- wakeup-source;
- };
-+
-+ reset {
-+ label = "reset";
-+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_RESTART>;
-+ debounce-interval = <10>;
-+ };
- };
-
- lcd_display: disp0 {
-@@ -297,4 +304,10 @@
- MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
- >;
- };
-+
-+ pinctrl_switch3_ixora: switch3ixora {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0
-+ >;
-+ };
- };
+++ /dev/null
-CONFIG_ARCH_BINFMT_ELF_STATE=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU=y
-CONFIG_ARCH_HAS_SYNC_DMA_FOR_DEVICE=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-CONFIG_ARCH_MMAP_RND_BITS_MAX=15
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
-CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ATA=y
-CONFIG_ATA_PIIX=y
-CONFIG_BLK_DEV_BSG=y
-CONFIG_BLK_DEV_BSGLIB=y
-# CONFIG_BLK_DEV_DM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_MD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BOARD_SCACHE=y
-CONFIG_BOOT_ELF32=y
-CONFIG_BOUNCE=y
-CONFIG_BUILTIN_DTB=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLKBLD_I8253=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKEVT_I8253=y
-CONFIG_CLKSRC_I8253=y
-CONFIG_CLKSRC_MIPS_GIC=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-# CONFIG_COMMON_CLK_BOSTON is not set
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_RIXI=y
-# CONFIG_CPU_HAS_SMARTMIPS is not set
-CONFIG_CPU_HAS_SYNC=y
-# CONFIG_CPU_MICROMIPS is not set
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_3_5_FEATURES is not set
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS32_R5_FEATURES is not set
-# CONFIG_CPU_MIPS32_R6 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_MIPS64_R6 is not set
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_MIPSR2_IRQ_EI=y
-CONFIG_CPU_MIPSR2_IRQ_VI=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-# CONFIG_CPU_NEVADA is not set
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-# CONFIG_CPU_RM7000 is not set
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CPU_SUPPORTS_MSA=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CSRC_R4K=y
-CONFIG_DMA_DIRECT_OPS=y
-CONFIG_DMA_MAYBE_COHERENT=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_DMA_NONCOHERENT_CACHE_SYNC=y
-CONFIG_DMA_NONCOHERENT_MMAP=y
-CONFIG_DMA_NONCOHERENT_OPS=y
-CONFIG_DNOTIFY=y
-CONFIG_DTC=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_EXT4_FS=y
-CONFIG_F2FS_FS=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_IPI=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_LIB_ASHLDI3=y
-CONFIG_GENERIC_LIB_ASHRDI3=y
-CONFIG_GENERIC_LIB_CMPDI2=y
-CONFIG_GENERIC_LIB_LSHRDI3=y
-CONFIG_GENERIC_LIB_UCMPDI2=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GLOB=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_ARCH_COMPILER_H=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_CBPF_JIT=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_COPY_THREAD_TLS=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KVM=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PCSPKR_PLATFORM=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_RSEQ=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HW_CONSOLE=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_I8253=y
-CONFIG_I8253_LOCK=y
-CONFIG_I8259=y
-CONFIG_INPUT=y
-# CONFIG_INPUT_MISC is not set
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_MIPS_CPU=y
-CONFIG_IRQ_WORK=y
-CONFIG_ISA_DMA_API=y
-CONFIG_JBD2=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
-CONFIG_KALLSYMS=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_XZ is not set
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_MD=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGRATION=y
-CONFIG_MIPS=y
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-CONFIG_MIPS_BONITO64=y
-CONFIG_MIPS_CLOCK_VSYSCALL=y
-CONFIG_MIPS_CM=y
-# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
-CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER=y
-# CONFIG_MIPS_CMDLINE_FROM_DTB is not set
-# CONFIG_MIPS_CMP is not set
-CONFIG_MIPS_CPC=y
-# CONFIG_MIPS_CPS is not set
-CONFIG_MIPS_CPU_SCACHE=y
-# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-CONFIG_MIPS_EXTERNAL_TIMER=y
-CONFIG_MIPS_GIC=y
-CONFIG_MIPS_L1_CACHE_SHIFT=6
-CONFIG_MIPS_L1_CACHE_SHIFT_6=y
-CONFIG_MIPS_MALTA=y
-CONFIG_MIPS_MSC=y
-CONFIG_MIPS_MT=y
-CONFIG_MIPS_MT_FPAFF=y
-CONFIG_MIPS_MT_SMP=y
-CONFIG_MIPS_NO_APPENDED_DTB=y
-CONFIG_MIPS_NR_CPU_NR_MAP=2
-CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y
-# CONFIG_MIPS_RAW_APPENDED_DTB is not set
-CONFIG_MIPS_SPRAM=y
-# CONFIG_MIPS_VPE_LOADER is not set
-CONFIG_MODULES_TREE_LOOKUP=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MTD_CFI_STAA=y
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_NO_HZ=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=2
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_NET=y
-CONFIG_PADATA=y
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_PATA_LEGACY=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DRIVERS_LEGACY=y
-CONFIG_PCI_GT64XXX_PCI0=y
-CONFIG_PCSPKR_PLATFORM=y
-CONFIG_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_PIIX4_POWEROFF=y
-CONFIG_POWER_RESET_SYSCON=y
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_PROC_PAGE_MONITOR=y
-# CONFIG_QFMT_V1 is not set
-CONFIG_QFMT_V2=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_QUOTA=y
-CONFIG_QUOTACTL=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_QUOTA_TREE=y
-CONFIG_RATIONAL=y
-CONFIG_RCU_NEED_SEGCBLIST=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_RELAY=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_MC146818_LIB=y
-CONFIG_SCSI=y
-CONFIG_SECCOMP=y
-CONFIG_SECCOMP_FILTER=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SG_POOL=y
-CONFIG_SMP=y
-CONFIG_SMP_UP=y
-CONFIG_SRCU=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SYNC_R4K=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_CPU_MIPS32_R3_5=y
-CONFIG_SYS_HAS_CPU_MIPS32_R5=y
-CONFIG_SYS_HAS_CPU_MIPS32_R6=y
-CONFIG_SYS_HAS_CPU_MIPS64_R1=y
-CONFIG_SYS_HAS_CPU_MIPS64_R2=y
-CONFIG_SYS_HAS_CPU_MIPS64_R6=y
-CONFIG_SYS_HAS_CPU_NEVADA=y
-CONFIG_SYS_HAS_CPU_RM7000=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_HIGHMEM=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_MICROMIPS=y
-CONFIG_SYS_SUPPORTS_MIPS16=y
-CONFIG_SYS_SUPPORTS_MIPS_CMP=y
-CONFIG_SYS_SUPPORTS_MIPS_CPS=y
-CONFIG_SYS_SUPPORTS_MULTITHREADING=y
-CONFIG_SYS_SUPPORTS_RELOCATABLE=y
-CONFIG_SYS_SUPPORTS_SCHED_SMT=y
-CONFIG_SYS_SUPPORTS_SMARTMIPS=y
-CONFIG_SYS_SUPPORTS_SMP=y
-CONFIG_SYS_SUPPORTS_VPE_LOADER=y
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_USB_SUPPORT=y
-# CONFIG_USERIO is not set
-CONFIG_USE_OF=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_VXFS_FS=y
-CONFIG_XPS=y
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2019 MediaTek Inc.
- * Author: Ryder Lee <ryder.lee@mediatek.com>
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include "mt7629.dtsi"
-
-/ {
- model = "MediaTek MT7629 reference board";
- compatible = "mediatek,mt7629-lynx-rfb", "mediatek,mt7629";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n8";
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- reset {
- label = "factory";
- linux,code = <KEY_RESTART>;
- gpios = <&pio 60 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "wps";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&pio 58 GPIO_ACTIVE_LOW>;
- };
- };
-
- gsw: gsw@0 {
- compatible = "mediatek,mt753x";
- mediatek,ethsys = <ðsys>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- memory@40000000 {
- device_type = "memory";
- reg = <0 0x40000000 0 0x10000000>;
- };
-
- reg_3p3v: regulator-3p3v {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- reg_5v: regulator-5v {
- compatible = "regulator-fixed";
- regulator-name = "fixed-5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-boot-on;
- regulator-always-on;
- };
-};
-
-ð {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_leds_pins>;
- status = "okay";
-
- gmac0: mac@0 {
- compatible = "mediatek,eth-mac";
- reg = <0>;
- mtd-mac-address = <&factory 0x2a>;
- phy-mode = "sgmii";
- fixed-link {
- speed = <1000>;
- full-duplex;
- pause;
- };
- };
-
- gmac1: mac@1 {
- compatible = "mediatek,eth-mac";
- reg = <1>;
- mtd-mac-address = <&factory 0x24>;
- phy-handle = <&phy0>;
- };
-
- mdio: mdio-bus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- phy-mode = "gmii";
- };
- };
-};
-
-&gsw {
- mediatek,mdio = <&mdio>;
- mediatek,portmap = "llllw";
- mediatek,mdio_master_pinmux = <0>;
- reset-gpios = <&pio 28 0>;
- interrupt-parent = <&pio>;
- interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
- status = "okay";
-
- port6: port@6 {
- compatible = "mediatek,mt753x-port";
- reg = <6>;
- phy-mode = "sgmii";
- fixed-link {
- speed = <2500>;
- full-duplex;
- };
- };
-};
-
-&i2c {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c_pins>;
- status = "okay";
-};
-
-&qspi {
- pinctrl-names = "default";
- pinctrl-0 = <&qspi_pins>;
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x00000 0x60000>;
- read-only;
- };
-
- partition@60000 {
- label = "u-boot-env";
- reg = <0x60000 0x10000>;
- read-only;
- };
-
- factory: partition@70000 {
- label = "factory";
- reg = <0x70000 0x40000>;
- read-only;
- };
-
- partition@b0000 {
- label = "firmware";
- reg = <0xb0000 0xb50000>;
- };
- };
- };
-};
-
-&pio {
- eth_pins: eth-pins {
- mux {
- function = "eth";
- groups = "mdc_mdio";
- };
- };
-
- ephy_leds_pins: ephy-leds-pins {
- mux {
- function = "led";
- groups = "gphy_leds_0", "ephy_leds";
- };
- };
-
- i2c_pins: i2c-pins {
- mux {
- function = "i2c";
- groups = "i2c_0";
- };
-
- conf {
- pins = "I2C_SDA", "I2C_SCL";
- drive-strength = <4>;
- bias-disable;
- };
- };
-
- pcie_pins: pcie-pins {
- mux {
- function = "pcie";
- groups = "pcie_clkreq",
- "pcie_pereset",
- "pcie_wake";
- };
- };
-
- pwm_pins: pwm-pins {
- mux {
- function = "pwm";
- groups = "pwm_0";
- };
- };
-
- /* Serial NAND is shared pin with SPI-NOR */
- serial_nand_pins: serial-nand-pins {
- mux {
- function = "flash";
- groups = "snfi";
- };
- };
-
- spi_pins: spi-pins {
- mux {
- function = "spi";
- groups = "spi_0";
- };
- };
-
- /* SPI-NOR is shared pin with serial NAND */
- qspi_pins: qspi-pins {
- mux {
- function = "flash";
- groups = "spi_nor";
- };
- };
-
- uart0_pins: uart0-pins {
- mux {
- function = "uart";
- groups = "uart0_txd_rxd" ;
- };
- };
-
- uart1_pins: uart1-pins {
- mux {
- function = "uart";
- groups = "uart1_0_tx_rx" ;
- };
- };
-
- uart2_pins: uart2-pins {
- mux {
- function = "uart";
- groups = "uart2_0_txd_rxd" ;
- };
- };
-
- watchdog_pins: watchdog-pins {
- mux {
- function = "watchdog";
- groups = "watchdog";
- };
- };
-
- wmac0_pins: wmac0-pins {
- mux {
- function = "wifi";
- groups = "wf0_5g";
- drive-strength = <4>;
- };
- };
-
- wmac1_pins: wmac0-pins {
- mux {
- function = "wifi";
- groups = "wf0_2g";
- drive-strength = <4>;
- };
- };
-};
-
-&spi {
- pinctrl-names = "default";
- pinctrl-0 = <&spi_pins>;
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins>;
- status = "okay";
-};
-
-&ssusb {
- vusb33-supply = <®_3p3v>;
- vbus-supply = <®_5v>;
- status = "okay";
-};
-
-&u3phy1 {
- status = "okay";
-};
-
-&watchdog {
- pinctrl-names = "default";
- pinctrl-0 = <&watchdog_pins>;
- status = "okay";
-};
-
-&wmac {
- pinctrl-names = "default";
- pinctrl-0 = <&wmac0_pins>;
- pinctrl-1 = <&wmac1_pins>;
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2019 MediaTek Inc.
- * Author: Ryder Lee <ryder.lee@mediatek.com>
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include "mt7629.dtsi"
-
-/ {
- model = "MediaTek MT7629 reference board";
- compatible = "mediatek,mt7629-lynx-rfb", "mediatek,mt7629";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n8";
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- reset {
- label = "factory";
- linux,code = <KEY_RESTART>;
- gpios = <&pio 60 GPIO_ACTIVE_LOW>;
- };
-
- wps {
- label = "wps";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&pio 58 GPIO_ACTIVE_LOW>;
- };
- };
-
- gsw: gsw@0 {
- compatible = "mediatek,mt753x";
- mediatek,ethsys = <ðsys>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- memory@40000000 {
- device_type = "memory";
- reg = <0 0x40000000 0 0x10000000>;
- };
-
- reg_3p3v: regulator-3p3v {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- reg_5v: regulator-5v {
- compatible = "regulator-fixed";
- regulator-name = "fixed-5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-boot-on;
- regulator-always-on;
- };
-};
-
-ð {
- pinctrl-names = "default";
- pinctrl-0 = <&ephy_leds_pins>;
- status = "okay";
-
- gmac0: mac@0 {
- compatible = "mediatek,eth-mac";
- reg = <0>;
- mtd-mac-address = <&factory 0x2a>;
- phy-mode = "sgmii";
- fixed-link {
- speed = <1000>;
- full-duplex;
- pause;
- };
- };
-
- gmac1: mac@1 {
- compatible = "mediatek,eth-mac";
- reg = <1>;
- mtd-mac-address = <&factory 0x24>;
- phy-handle = <&phy0>;
- };
-
- mdio: mdio-bus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- phy-mode = "gmii";
- };
- };
-};
-
-&gsw {
- mediatek,mdio = <&mdio>;
- mediatek,portmap = "llllw";
- mediatek,mdio_master_pinmux = <0>;
- reset-gpios = <&pio 28 0>;
- interrupt-parent = <&pio>;
- interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
- status = "okay";
-
- port6: port@6 {
- compatible = "mediatek,mt753x-port";
- reg = <6>;
- phy-mode = "sgmii";
- fixed-link {
- speed = <2500>;
- full-duplex;
- };
- };
-};
-
-&i2c {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c_pins>;
- status = "okay";
-};
-
-&qspi {
- pinctrl-names = "default";
- pinctrl-0 = <&qspi_pins>;
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x00000 0x60000>;
- read-only;
- };
-
- partition@60000 {
- label = "u-boot-env";
- reg = <0x60000 0x10000>;
- read-only;
- };
-
- factory: partition@70000 {
- label = "factory";
- reg = <0x70000 0x40000>;
- read-only;
- };
-
- partition@b0000 {
- label = "firmware";
- reg = <0xb0000 0xb50000>;
- };
- };
- };
-};
-
-&pio {
- eth_pins: eth-pins {
- mux {
- function = "eth";
- groups = "mdc_mdio";
- };
- };
-
- ephy_leds_pins: ephy-leds-pins {
- mux {
- function = "led";
- groups = "gphy_leds_0", "ephy_leds";
- };
- };
-
- i2c_pins: i2c-pins {
- mux {
- function = "i2c";
- groups = "i2c_0";
- };
-
- conf {
- pins = "I2C_SDA", "I2C_SCL";
- drive-strength = <4>;
- bias-disable;
- };
- };
-
- pcie_pins: pcie-pins {
- mux {
- function = "pcie";
- groups = "pcie_clkreq",
- "pcie_pereset",
- "pcie_wake";
- };
- };
-
- pwm_pins: pwm-pins {
- mux {
- function = "pwm";
- groups = "pwm_0";
- };
- };
-
- /* Serial NAND is shared pin with SPI-NOR */
- serial_nand_pins: serial-nand-pins {
- mux {
- function = "flash";
- groups = "snfi";
- };
- };
-
- spi_pins: spi-pins {
- mux {
- function = "spi";
- groups = "spi_0";
- };
- };
-
- /* SPI-NOR is shared pin with serial NAND */
- qspi_pins: qspi-pins {
- mux {
- function = "flash";
- groups = "spi_nor";
- };
- };
-
- uart0_pins: uart0-pins {
- mux {
- function = "uart";
- groups = "uart0_txd_rxd" ;
- };
- };
-
- uart1_pins: uart1-pins {
- mux {
- function = "uart";
- groups = "uart1_0_tx_rx" ;
- };
- };
-
- uart2_pins: uart2-pins {
- mux {
- function = "uart";
- groups = "uart2_0_txd_rxd" ;
- };
- };
-
- watchdog_pins: watchdog-pins {
- mux {
- function = "watchdog";
- groups = "watchdog";
- };
- };
-
- wmac0_pins: wmac0-pins {
- mux {
- function = "wifi";
- groups = "wf0_5g";
- drive-strength = <4>;
- };
- };
-
- wmac1_pins: wmac0-pins {
- mux {
- function = "wifi";
- groups = "wf0_2g";
- drive-strength = <4>;
- };
- };
-};
-
-&spi {
- pinctrl-names = "default";
- pinctrl-0 = <&spi_pins>;
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins>;
- status = "okay";
-};
-
-&ssusb {
- vusb33-supply = <®_3p3v>;
- vbus-supply = <®_5v>;
- status = "okay";
-};
-
-&u3phy1 {
- status = "okay";
-};
-
-&watchdog {
- pinctrl-names = "default";
- pinctrl-0 = <&watchdog_pins>;
- status = "okay";
-};
-
-&wmac {
- pinctrl-names = "default";
- pinctrl-0 = <&wmac0_pins>;
- pinctrl-1 = <&wmac1_pins>;
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2019 MediaTek Inc.
- *
- * Author: Ryder Lee <ryder.lee@mediatek.com>
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/mt7629-clk.h>
-#include <dt-bindings/power/mt7622-power.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/phy/phy.h>
-#include <dt-bindings/reset/mt7629-resets.h>
-
-/ {
- compatible = "mediatek,mt7629";
- interrupt-parent = <&sysirq>;
- #address-cells = <2>;
- #size-cells = <2>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
- enable-method = "mediatek,mt6589-smp";
-
- cpu0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x0>;
- clock-frequency = <1250000000>;
- cci-control-port = <&cci_control2>;
- };
-
- cpu1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a7";
- reg = <0x1>;
- clock-frequency = <1250000000>;
- cci-control-port = <&cci_control2>;
- };
- };
-
- pmu {
- compatible = "arm,cortex-a7-pmu";
- interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 9 IRQ_TYPE_LEVEL_LOW>;
- interrupt-affinity = <&cpu0>, <&cpu1>;
- };
-
- clk20m: oscillator-0 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <20000000>;
- clock-output-names = "clk20m";
- };
-
- clk40m: oscillator-1 {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <40000000>;
- clock-output-names = "clkxtal";
- };
-
- timer {
- compatible = "arm,armv7-timer";
- interrupt-parent = <&gic>;
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- clock-frequency = <20000000>;
- arm,cpu-registers-not-fw-configured;
- };
-
- soc {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- infracfg: syscon@10000000 {
- compatible = "mediatek,mt7629-infracfg", "syscon";
- reg = <0x10000000 0x1000>;
- #clock-cells = <1>;
- };
-
- pericfg: syscon@10002000 {
- compatible = "mediatek,mt7629-pericfg", "syscon";
- reg = <0x10002000 0x1000>;
- #clock-cells = <1>;
- };
-
- scpsys: scpsys@10006000 {
- compatible = "mediatek,mt7629-scpsys",
- "mediatek,mt7622-scpsys";
- #power-domain-cells = <1>;
- reg = <0x10006000 0x1000>;
- clocks = <&topckgen CLK_TOP_HIF_SEL>;
- clock-names = "hif_sel";
- assigned-clocks = <&topckgen CLK_TOP_HIF_SEL>;
- assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>;
- infracfg = <&infracfg>;
- };
-
- timer: timer@10009000 {
- compatible = "mediatek,mt7629-timer",
- "mediatek,mt6765-timer";
- reg = <0x10009000 0x60>;
- interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk20m>;
- clock-names = "clk20m";
- };
-
- sysirq: interrupt-controller@10200a80 {
- compatible = "mediatek,mt7629-sysirq",
- "mediatek,mt6577-sysirq";
- reg = <0x10200a80 0x20>;
- interrupt-controller;
- #interrupt-cells = <3>;
- interrupt-parent = <&gic>;
- };
-
- apmixedsys: syscon@10209000 {
- compatible = "mediatek,mt7629-apmixedsys", "syscon";
- reg = <0x10209000 0x1000>;
- #clock-cells = <1>;
- };
-
- rng: rng@1020f000 {
- compatible = "mediatek,mt7629-rng",
- "mediatek,mt7623-rng";
- reg = <0x1020f000 0x100>;
- clocks = <&infracfg CLK_INFRA_TRNG_PD>;
- clock-names = "rng";
- };
-
- topckgen: syscon@10210000 {
- compatible = "mediatek,mt7629-topckgen", "syscon";
- reg = <0x10210000 0x1000>;
- #clock-cells = <1>;
- };
-
- watchdog: watchdog@10212000 {
- compatible = "mediatek,mt7629-wdt",
- "mediatek,mt6589-wdt";
- reg = <0x10212000 0x100>;
- };
-
- pio: pinctrl@10217000 {
- compatible = "mediatek,mt7629-pinctrl";
- reg = <0x10217000 0x8000>,
- <0x10005000 0x1000>;
- reg-names = "base", "eint";
- gpio-controller;
- gpio-ranges = <&pio 0 0 79>;
- #gpio-cells = <2>;
- #interrupt-cells = <2>;
- interrupt-controller;
- interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-parent = <&gic>;
- };
-
- gic: interrupt-controller@10300000 {
- compatible = "arm,gic-400";
- interrupt-controller;
- #interrupt-cells = <3>;
- interrupt-parent = <&gic>;
- reg = <0x10310000 0x1000>,
- <0x10320000 0x1000>,
- <0x10340000 0x2000>,
- <0x10360000 0x2000>;
- };
-
- cci: cci@10390000 {
- compatible = "arm,cci-400";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x10390000 0x1000>;
- ranges = <0 0x10390000 0x10000>;
-
- cci_control0: slave-if@1000 {
- compatible = "arm,cci-400-ctrl-if";
- interface-type = "ace-lite";
- reg = <0x1000 0x1000>;
- };
-
- cci_control1: slave-if@4000 {
- compatible = "arm,cci-400-ctrl-if";
- interface-type = "ace";
- reg = <0x4000 0x1000>;
- };
-
- cci_control2: slave-if@5000 {
- compatible = "arm,cci-400-ctrl-if";
- interface-type = "ace";
- reg = <0x5000 0x1000>;
- };
-
- pmu@9000 {
- compatible = "arm,cci-400-pmu,r1";
- reg = <0x9000 0x5000>;
- interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
- };
- };
-
- uart0: serial@11002000 {
- compatible = "mediatek,mt7629-uart",
- "mediatek,mt6577-uart";
- reg = <0x11002000 0x400>;
- interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&topckgen CLK_TOP_UART_SEL>,
- <&pericfg CLK_PERI_UART0_PD>;
- clock-names = "baud", "bus";
- status = "disabled";
- };
-
- uart1: serial@11003000 {
- compatible = "mediatek,mt7629-uart",
- "mediatek,mt6577-uart";
- reg = <0x11003000 0x400>;
- interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&topckgen CLK_TOP_UART_SEL>,
- <&pericfg CLK_PERI_UART1_PD>;
- clock-names = "baud", "bus";
- status = "disabled";
- };
-
- uart2: serial@11004000 {
- compatible = "mediatek,mt7629-uart",
- "mediatek,mt6577-uart";
- reg = <0x11004000 0x400>;
- interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&topckgen CLK_TOP_UART_SEL>,
- <&pericfg CLK_PERI_UART2_PD>;
- clock-names = "baud", "bus";
- status = "disabled";
- };
-
- i2c: i2c@11007000 {
- compatible = "mediatek,mt7629-i2c",
- "mediatek,mt2712-i2c";
- reg = <0x11007000 0x90>,
- <0x11000100 0x80>;
- interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
- clock-div = <4>;
- clocks = <&pericfg CLK_PERI_I2C0_PD>,
- <&pericfg CLK_PERI_AP_DMA_PD>;
- clock-names = "main", "dma";
- assigned-clocks = <&topckgen CLK_TOP_AXI_SEL>;
- assigned-clock-parents = <&topckgen CLK_TOP_SYSPLL1_D2>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- spi: spi@1100a000 {
- compatible = "mediatek,mt7629-spi",
- "mediatek,mt7622-spi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x1100a000 0x100>;
- interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
- <&topckgen CLK_TOP_SPI0_SEL>,
- <&pericfg CLK_PERI_SPI0_PD>;
- clock-names = "parent-clk", "sel-clk", "spi-clk";
- status = "disabled";
- };
-
- qspi: spi@11014000 {
- compatible = "mediatek,mt7629-nor",
- "mediatek,mt8173-nor";
- reg = <0x11014000 0xe0>;
- clocks = <&pericfg CLK_PERI_FLASH_PD>,
- <&topckgen CLK_TOP_FLASH_SEL>;
- clock-names = "spi", "sf";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- wmac: wmac@18000000 {
- compatible = "mediatek,mt7629-wmac";
- reg = <0x18000000 0x100000>;
- interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 129 IRQ_TYPE_LEVEL_LOW>;
- mediatek,mtd-eeprom = <&factory 0x0000>;
- status = "disabled";
- };
-
- ssusbsys: syscon@1a000000 {
- compatible = "mediatek,mt7629-ssusbsys", "syscon";
- reg = <0x1a000000 0x1000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
- ssusb: usb@1a0c0000 {
- compatible = "mediatek,mt7629-xhci",
- "mediatek,mtk-xhci";
- reg = <0x1a0c0000 0x01000>,
- <0x1a0c3e00 0x0100>;
- reg-names = "mac", "ippc";
- interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&ssusbsys CLK_SSUSB_SYS_EN>,
- <&ssusbsys CLK_SSUSB_REF_EN>,
- <&ssusbsys CLK_SSUSB_MCU_EN>,
- <&ssusbsys CLK_SSUSB_DMA_EN>;
- clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
- assigned-clocks = <&topckgen CLK_TOP_AXI_SEL>,
- <&topckgen CLK_TOP_SATA_SEL>,
- <&topckgen CLK_TOP_HIF_SEL>;
- assigned-clock-parents = <&topckgen CLK_TOP_SYSPLL1_D2>,
- <&topckgen CLK_TOP_UNIVPLL2_D4>,
- <&topckgen CLK_TOP_UNIVPLL1_D2>;
- power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF1>;
- phys = <&u2port0 PHY_TYPE_USB2>,
- <&u3port0 PHY_TYPE_USB3>;
- status = "disabled";
- };
-
- u3phy1: usb-phy@1a0c4000 {
- compatible = "mediatek,generic-tphy-v2";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- status = "disabled";
-
- u2port0: usb-phy@1a0c4000 {
- reg = <0x1a0c4000 0x700>;
- clocks = <&ssusbsys CLK_SSUSB_U2_PHY_EN>;
- clock-names = "ref";
- #phy-cells = <1>;
- status = "okay";
- };
-
- u3port0: usb-phy@1a1c4700 {
- reg = <0x1a1c4700 0x700>;
- clocks = <&clk20m>;
- clock-names = "ref";
- #phy-cells = <1>;
- status = "okay";
- };
- };
-
- pciesys: syscon@1a100800 {
- compatible = "mediatek,mt7629-pciesys", "syscon";
- reg = <0x1a100800 0x1000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
- ethsys: syscon@1b000000 {
- compatible = "mediatek,mt7629-ethsys", "syscon";
- reg = <0x1b000000 0x1000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
- eth: ethernet@1b100000 {
- compatible = "mediatek,mt7629-eth",
- "syscon";
- reg = <0x1b100000 0x20000>;
- interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 224 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&topckgen CLK_TOP_ETH_SEL>,
- <&topckgen CLK_TOP_F10M_REF_SEL>,
- <ðsys CLK_ETH_ESW_EN>,
- <ðsys CLK_ETH_GP0_EN>,
- <ðsys CLK_ETH_GP1_EN>,
- <ðsys CLK_ETH_GP2_EN>,
- <ðsys CLK_ETH_FE_EN>,
- <&sgmiisys0 CLK_SGMII_TX_EN>,
- <&sgmiisys0 CLK_SGMII_RX_EN>,
- <&sgmiisys0 CLK_SGMII_CDR_REF>,
- <&sgmiisys0 CLK_SGMII_CDR_FB>,
- <&sgmiisys1 CLK_SGMII_TX_EN>,
- <&sgmiisys1 CLK_SGMII_RX_EN>,
- <&sgmiisys1 CLK_SGMII_CDR_REF>,
- <&sgmiisys1 CLK_SGMII_CDR_FB>,
- <&apmixedsys CLK_APMIXED_SGMIPLL>,
- <&apmixedsys CLK_APMIXED_ETH2PLL>;
- clock-names = "ethif", "sgmiitop", "esw", "gp0", "gp1", "gp2",
- "fe", "sgmii_tx250m", "sgmii_rx250m",
- "sgmii_cdr_ref", "sgmii_cdr_fb",
- "sgmii2_tx250m", "sgmii2_rx250m",
- "sgmii2_cdr_ref", "sgmii2_cdr_fb",
- "sgmii_ck", "eth2pll";
- assigned-clocks = <&topckgen CLK_TOP_ETH_SEL>,
- <&topckgen CLK_TOP_F10M_REF_SEL>;
- assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>,
- <&topckgen CLK_TOP_SGMIIPLL_D2>;
- power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>;
- mediatek,ethsys = <ðsys>;
- mediatek,sgmiisys = <&sgmiisys0>,<&sgmiisys1>;
- mediatek,infracfg = <&infracfg>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- sgmiisys0: syscon@1b128000 {
- compatible = "mediatek,mt7629-sgmiisys", "syscon";
- reg = <0x1b128000 0x3000>;
- #clock-cells = <1>;
- mediatek,physpeed = "2500";
- };
-
- sgmiisys1: syscon@1b130000 {
- compatible = "mediatek,mt7629-sgmiisys", "syscon";
- reg = <0x1b130000 0x3000>;
- #clock-cells = <1>;
- mediatek,physpeed = "2500";
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
-/*
- * Copyright (c) 2018 MediaTek Inc.
- * Author: Ryder Lee <ryder.lee@mediatek.com>
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-#include "mt7622.dtsi"
-#include "mt6380.dtsi"
-
-/ {
- model = "Bananapi BPI-R64";
- compatible = "bananapi,bpi-r64", "mediatek,mt7622";
-
- chosen {
- bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n1 swiotlb=512";
- };
-
- cpus {
- cpu@0 {
- proc-supply = <&mt6380_vcpu_reg>;
- sram-supply = <&mt6380_vm_reg>;
- };
-
- cpu@1 {
- proc-supply = <&mt6380_vcpu_reg>;
- sram-supply = <&mt6380_vm_reg>;
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- factory {
- label = "factory";
- linux,code = <BTN_0>;
- gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
- };
-
- wps {
- label = "wps";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&pio 102 GPIO_ACTIVE_HIGH>;
- };
- };
-
- gsw: gsw@0 {
- compatible = "mediatek,mt753x";
- mediatek,ethsys = <ðsys>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- leds {
- compatible = "gpio-leds";
-
- green {
- label = "bpi-r64:pio:green";
- gpios = <&pio 89 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
-
- red {
- label = "bpi-r64:pio:red";
- gpios = <&pio 88 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
- };
-
- memory {
- reg = <0 0x40000000 0 0x40000000>;
- };
-
- reg_1p8v: regulator-1p8v {
- compatible = "regulator-fixed";
- regulator-name = "fixed-1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- reg_3p3v: regulator-3p3v {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- reg_5v: regulator-5v {
- compatible = "regulator-fixed";
- regulator-name = "fixed-5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
-};
-
-&bch {
- status = "disabled";
-};
-
-&btif {
- status = "okay";
-};
-
-&cir {
- pinctrl-names = "default";
- pinctrl-0 = <&irrx_pins>;
- status = "okay";
-};
-
-ð {
- status = "okay";
- gmac0: mac@0 {
- compatible = "mediatek,eth-mac";
- reg = <0>;
- phy-mode = "sgmii";
- fixed-link {
- speed = <1000>;
- full-duplex;
- pause;
- };
- };
- gmac1: mac@1 {
- compatible = "mediatek,eth-mac";
- reg = <1>;
- phy-mode = "rgmii";
- fixed-link {
- speed = <1000>;
- full-duplex;
- pause;
- };
- };
- mdio: mdio-bus {
- #address-cells = <1>;
- #size-cells = <0>;
- };
-};
-
-&gsw {
- mediatek,mdio = <&mdio>;
- mediatek,portmap = "wllll";
- mediatek,mdio_master_pinmux = <0>;
- reset-gpios = <&pio 54 0>;
- interrupt-parent = <&pio>;
- interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
- status = "okay";
-
- port5: port@5 {
- compatible = "mediatek,mt753x-port";
- reg = <5>;
- phy-mode = "rgmii";
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
-
- port6: port@6 {
- compatible = "mediatek,mt753x-port";
- reg = <6>;
- phy-mode = "sgmii";
- fixed-link {
- speed = <2500>;
- full-duplex;
- };
- };
-};
-
-&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
- status = "okay";
-};
-
-&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
- status = "okay";
-};
-
-&mmc0 {
- pinctrl-names = "default", "state_uhs";
- pinctrl-0 = <&emmc_pins_default>;
- pinctrl-1 = <&emmc_pins_uhs>;
- status = "okay";
- bus-width = <8>;
- max-frequency = <50000000>;
- cap-mmc-highspeed;
- mmc-hs200-1_8v;
- vmmc-supply = <®_3p3v>;
- vqmmc-supply = <®_1p8v>;
- assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>;
- assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
- non-removable;
-};
-
-&mmc1 {
- pinctrl-names = "default", "state_uhs";
- pinctrl-0 = <&sd0_pins_default>;
- pinctrl-1 = <&sd0_pins_uhs>;
- status = "okay";
- bus-width = <4>;
- max-frequency = <50000000>;
- cap-sd-highspeed;
- r_smpl = <1>;
- cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
- vmmc-supply = <®_3p3v>;
- vqmmc-supply = <®_3p3v>;
- assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>;
- assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
-};
-
-&nandc {
- pinctrl-names = "default";
- pinctrl-0 = <¶llel_nand_pins>;
- status = "disabled";
-};
-
-&nor_flash {
- pinctrl-names = "default";
- pinctrl-0 = <&spi_nor_pins>;
- status = "disabled";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- };
-};
-
-&pcie {
- pinctrl-names = "default";
- pinctrl-0 = <&pcie0_pins>, <&pcie1_pins>;
- status = "okay";
-
- pcie@0,0 {
- status = "okay";
- };
-
- pcie@1,0 {
- status = "okay";
- };
-};
-
-&pio {
- /* Attention: GPIO 90 is used to switch between PCIe@1,0 and
- * SATA functions. i.e. output-high: PCIe, output-low: SATA
- */
- asm_sel {
- gpio-hog;
- gpios = <90 GPIO_ACTIVE_HIGH>;
- output-high;
- };
-
- /* eMMC is shared pin with parallel NAND */
- emmc_pins_default: emmc-pins-default {
- mux {
- function = "emmc", "emmc_rst";
- groups = "emmc";
- };
-
- /* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
- * "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4,
- * DAT5,DAT6,DAT7,CMD,CLK for eMMC respectively
- */
- conf-cmd-dat {
- pins = "NDL0", "NDL1", "NDL2",
- "NDL3", "NDL4", "NDL5",
- "NDL6", "NDL7", "NRB";
- input-enable;
- bias-pull-up;
- };
-
- conf-clk {
- pins = "NCLE";
- bias-pull-down;
- };
- };
-
- emmc_pins_uhs: emmc-pins-uhs {
- mux {
- function = "emmc";
- groups = "emmc";
- };
-
- conf-cmd-dat {
- pins = "NDL0", "NDL1", "NDL2",
- "NDL3", "NDL4", "NDL5",
- "NDL6", "NDL7", "NRB";
- input-enable;
- drive-strength = <4>;
- bias-pull-up;
- };
-
- conf-clk {
- pins = "NCLE";
- drive-strength = <4>;
- bias-pull-down;
- };
- };
-
- eth_pins: eth-pins {
- mux {
- function = "eth";
- groups = "mdc_mdio", "rgmii_via_gmac2";
- };
- };
-
- i2c1_pins: i2c1-pins {
- mux {
- function = "i2c";
- groups = "i2c1_0";
- };
- };
-
- i2c2_pins: i2c2-pins {
- mux {
- function = "i2c";
- groups = "i2c2_0";
- };
- };
-
- i2s1_pins: i2s1-pins {
- mux {
- function = "i2s";
- groups = "i2s_out_mclk_bclk_ws",
- "i2s1_in_data",
- "i2s1_out_data";
- };
-
- conf {
- pins = "I2S1_IN", "I2S1_OUT", "I2S_BCLK",
- "I2S_WS", "I2S_MCLK";
- drive-strength = <12>;
- bias-pull-down;
- };
- };
-
- irrx_pins: irrx-pins {
- mux {
- function = "ir";
- groups = "ir_1_rx";
- };
- };
-
- irtx_pins: irtx-pins {
- mux {
- function = "ir";
- groups = "ir_1_tx";
- };
- };
-
- /* Parallel nand is shared pin with eMMC */
- parallel_nand_pins: parallel-nand-pins {
- mux {
- function = "flash";
- groups = "par_nand";
- };
- };
-
- pcie0_pins: pcie0-pins {
- mux {
- function = "pcie";
- groups = "pcie0_pad_perst",
- "pcie0_1_waken",
- "pcie0_1_clkreq";
- };
- };
-
- pcie1_pins: pcie1-pins {
- mux {
- function = "pcie";
- groups = "pcie1_pad_perst",
- "pcie1_0_waken",
- "pcie1_0_clkreq";
- };
- };
-
- pmic_bus_pins: pmic-bus-pins {
- mux {
- function = "pmic";
- groups = "pmic_bus";
- };
- };
-
- pwm7_pins: pwm1-2-pins {
- mux {
- function = "pwm";
- groups = "pwm_ch7_2";
- };
- };
-
- wled_pins: wled-pins {
- mux {
- function = "led";
- groups = "wled";
- };
- };
-
- sd0_pins_default: sd0-pins-default {
- mux {
- function = "sd";
- groups = "sd_0";
- };
-
- /* "I2S2_OUT, "I2S4_IN"", "I2S3_IN", "I2S2_IN",
- * "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1,
- * DAT2, DAT3, CMD, CLK for SD respectively.
- */
- conf-cmd-data {
- pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
- "I2S2_IN","I2S4_OUT";
- input-enable;
- drive-strength = <8>;
- bias-pull-up;
- };
- conf-clk {
- pins = "I2S3_OUT";
- drive-strength = <12>;
- bias-pull-down;
- };
- conf-cd {
- pins = "TXD3";
- bias-pull-up;
- };
- };
-
- sd0_pins_uhs: sd0-pins-uhs {
- mux {
- function = "sd";
- groups = "sd_0";
- };
-
- conf-cmd-data {
- pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
- "I2S2_IN","I2S4_OUT";
- input-enable;
- bias-pull-up;
- };
-
- conf-clk {
- pins = "I2S3_OUT";
- bias-pull-down;
- };
- };
-
- /* Serial NAND is shared pin with SPI-NOR */
- serial_nand_pins: serial-nand-pins {
- mux {
- function = "flash";
- groups = "snfi";
- };
- };
-
- spic0_pins: spic0-pins {
- mux {
- function = "spi";
- groups = "spic0_0";
- };
- };
-
- spic1_pins: spic1-pins {
- mux {
- function = "spi";
- groups = "spic1_0";
- };
- };
-
- /* SPI-NOR is shared pin with serial NAND */
- spi_nor_pins: spi-nor-pins {
- mux {
- function = "flash";
- groups = "spi_nor";
- };
- };
-
- /* serial NAND is shared pin with SPI-NOR */
- serial_nand_pins: serial-nand-pins {
- mux {
- function = "flash";
- groups = "snfi";
- };
- };
-
- uart0_pins: uart0-pins {
- mux {
- function = "uart";
- groups = "uart0_0_tx_rx" ;
- };
- };
-
- uart2_pins: uart2-pins {
- mux {
- function = "uart";
- groups = "uart2_1_tx_rx" ;
- };
- };
-
- watchdog_pins: watchdog-pins {
- mux {
- function = "watchdog";
- groups = "watchdog";
- };
- };
-};
-
-&pwm {
- pinctrl-names = "default";
- pinctrl-0 = <&pwm7_pins>;
- status = "okay";
-};
-
-&pwrap {
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_bus_pins>;
-
- status = "okay";
-};
-
-&sata {
- status = "disable";
-};
-
-&sata_phy {
- status = "disable";
-};
-
-&spi0 {
- pinctrl-names = "default";
- pinctrl-0 = <&spic0_pins>;
- status = "okay";
-};
-
-&spi1 {
- pinctrl-names = "default";
- pinctrl-0 = <&spic1_pins>;
- status = "okay";
-};
-
-&ssusb {
- vusb33-supply = <®_3p3v>;
- vbus-supply = <®_5v>;
- status = "okay";
-};
-
-&u3phy {
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins>;
- status = "okay";
-};
-
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart2_pins>;
- status = "okay";
-};
-
-&watchdog {
- pinctrl-names = "default";
- pinctrl-0 = <&watchdog_pins>;
- status = "okay";
-};
+++ /dev/null
-/*
- * Copyright (c) 2017 MediaTek Inc.
- * Author: Ming Huang <ming.huang@mediatek.com>
- * Sean Wang <sean.wang@mediatek.com>
- *
- * SPDX-License-Identifier: (GPL-2.0-only OR MIT)
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-#include "mt7622.dtsi"
-#include "mt6380.dtsi"
-
-/ {
- model = "Elecom WRC-2533";
- compatible = "elecom,wrc-2533gent", "mediatek,mt7622";
-
- aliases {
- led-boot = &led_power;
- led-failsafe = &led_power;
- led-running = &led_power;
- led-upgrade = &led_power;
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512 console=ttyS0,115200n8";
- };
-
- cpus {
- cpu@0 {
- proc-supply = <&mt6380_vcpu_reg>;
- sram-supply = <&mt6380_vm_reg>;
- };
-
- cpu@1 {
- proc-supply = <&mt6380_vcpu_reg>;
- sram-supply = <&mt6380_vm_reg>;
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- poll-interval = <100>;
-
- wps {
- label = "wps";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
- };
-
- factory {
- label = "factory";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&pio 102 GPIO_ACTIVE_LOW>;
- };
-
- switch0 {
- label = "switch0";
- gpios = <&pio 1 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- linux,input-type = <EV_SW>;
- };
-
- switch1 {
- label = "switch1";
- gpios = <&pio 16 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_1>;
- linux,input-type = <EV_SW>;
- };
-
- switch2 {
- label = "switch2";
- gpios = <&pio 17 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_2>;
- linux,input-type = <EV_SW>;
- };
-
- switch3 {
- label = "switch3";
- gpios = <&pio 18 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_3>;
- linux,input-type = <EV_SW>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led_power: power_g {
- label = "wrc-2533:green:power";
- gpios = <&pio 2 GPIO_ACTIVE_HIGH>;
- };
-
- power_b {
- label = "wrc-2533:blue:power";
- gpios = <&pio 19 GPIO_ACTIVE_HIGH>;
- };
-
- power_r {
- label = "wrc-2533:red:power";
- gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
- };
-
- usb {
- label = "wrc-2533:blue:usb";
- gpios = <&pio 74 GPIO_ACTIVE_HIGH>;
- };
-
- wps {
- label = "wrc-2533:red:wps";
- gpios = <&pio 76 GPIO_ACTIVE_LOW>;
- };
-
- wifi2 {
- label = "wrc-2533:blue:wifi2g";
- gpios = <&pio 85 GPIO_ACTIVE_LOW>;
- };
-
- wifi5 {
- label = "wrc-2533:blue:wifi5g";
- gpios = <&pio 91 GPIO_ACTIVE_LOW>;
- };
- };
-
- reg_usb_vbus: regulator {
- compatible = "regulator-fixed";
- regulator-name = "usb_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&pio 22 GPIO_ACTIVE_LOW>;
- enable-active-high;
- };
-
- memory {
- reg = <0 0x40000000 0 0x3F000000>;
- };
-
- reg_1p8v: regulator-1p8v {
- compatible = "regulator-fixed";
- regulator-name = "fixed-1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- reg_3p3v: regulator-3p3v {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- rtkgsw: rtkgsw@0 {
- compatible = "mediatek,rtk-gsw";
- mediatek,ethsys = <ðsys>;
- mediatek,mdio = <&mdio>;
- mediatek,reset-pin = <&pio 54 0>;
- status = "okay";
- };
-};
-
-&pcie {
- pinctrl-names = "default", "pcie1_pins";
- pinctrl-0 = <&pcie0_pins>;
- pinctrl-1 = <&pcie1_pins>;
- status = "okay";
-
- pcie@0,0 {
- status = "okay";
- mt7615@0,0 {
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x05000>;
- };
- };
-
- pcie@1,0 {
- status = "okay";
- };
-};
-
-&pio {
- /* eMMC is shared pin with parallel NAND */
- emmc_pins_default: emmc-pins-default {
- mux {
- function = "emmc", "emmc_rst";
- groups = "emmc";
- };
-
- /* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
- * "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4,
- * DAT5,DAT6,DAT7,CMD,CLK for eMMC respectively
- */
- conf-cmd-dat {
- pins = "NDL0", "NDL1", "NDL2",
- "NDL3", "NDL4", "NDL5",
- "NDL6", "NDL7", "NRB";
- input-enable;
- bias-pull-up;
- };
-
- conf-clk {
- pins = "NCLE";
- bias-pull-down;
- };
- };
-
- emmc_pins_uhs: emmc-pins-uhs {
- mux {
- function = "emmc";
- groups = "emmc";
- };
-
- conf-cmd-dat {
- pins = "NDL0", "NDL1", "NDL2",
- "NDL3", "NDL4", "NDL5",
- "NDL6", "NDL7", "NRB";
- input-enable;
- drive-strength = <4>;
- bias-pull-up;
- };
-
- conf-clk {
- pins = "NCLE";
- drive-strength = <4>;
- bias-pull-down;
- };
- };
-
- eth_pins: eth-pins {
- mux {
- function = "eth";
- groups = "mdc_mdio", "rgmii_via_gmac2";
- };
- };
-
- i2c1_pins: i2c1-pins {
- mux {
- function = "i2c";
- groups = "i2c1_0";
- };
- };
-
- i2c2_pins: i2c2-pins {
- mux {
- function = "i2c";
- groups = "i2c2_0";
- };
- };
-
- i2s1_pins: i2s1-pins {
- mux {
- function = "i2s";
- groups = "i2s_out_mclk_bclk_ws",
- "i2s1_in_data",
- "i2s1_out_data";
- };
-
- conf {
- pins = "I2S1_IN", "I2S1_OUT", "I2S_BCLK",
- "I2S_WS", "I2S_MCLK";
- drive-strength = <12>;
- bias-pull-down;
- };
- };
-
- irrx_pins: irrx-pins {
- mux {
- function = "ir";
- groups = "ir_1_rx";
- };
- };
-
- irtx_pins: irtx-pins {
- mux {
- function = "ir";
- groups = "ir_1_tx";
- };
- };
-
- /* Parallel nand is shared pin with eMMC */
- parallel_nand_pins: parallel-nand-pins {
- mux {
- function = "flash";
- groups = "par_nand";
- };
- };
-
- pcie0_pins: pcie0-pins {
- mux {
- function = "pcie";
- groups = "pcie0_pad_perst",
- "pcie0_1_waken",
- "pcie0_1_clkreq";
- };
- };
-
- pcie1_pins: pcie1-pins {
- mux {
- function = "pcie";
- groups = "pcie1_pad_perst",
- "pcie1_0_waken",
- "pcie1_0_clkreq";
- };
- };
-
- pmic_bus_pins: pmic-bus-pins {
- mux {
- function = "pmic";
- groups = "pmic_bus";
- };
- };
-
- pwm7_pins: pwm1-2-pins {
- mux {
- function = "pwm";
- groups = "pwm_ch7_2";
- };
- };
-
- wled_pins: wled-pins {
- mux {
- function = "led";
- groups = "wled";
- };
- };
-
- sd0_pins_default: sd0-pins-default {
- mux {
- function = "sd";
- groups = "sd_0";
- };
-
- /* "I2S2_OUT, "I2S4_IN"", "I2S3_IN", "I2S2_IN",
- * "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1,
- * DAT2, DAT3, CMD, CLK for SD respectively.
- */
- conf-cmd-data {
- pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
- "I2S2_IN","I2S4_OUT";
- input-enable;
- drive-strength = <8>;
- bias-pull-up;
- };
- conf-clk {
- pins = "I2S3_OUT";
- drive-strength = <12>;
- bias-pull-down;
- };
- conf-cd {
- pins = "TXD3";
- bias-pull-up;
- };
- };
-
- sd0_pins_uhs: sd0-pins-uhs {
- mux {
- function = "sd";
- groups = "sd_0";
- };
-
- conf-cmd-data {
- pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
- "I2S2_IN","I2S4_OUT";
- input-enable;
- bias-pull-up;
- };
-
- conf-clk {
- pins = "I2S3_OUT";
- bias-pull-down;
- };
- };
-
- /* Serial NAND is shared pin with SPI-NOR */
- serial_nand_pins: serial-nand-pins {
- mux {
- function = "flash";
- groups = "snfi";
- };
- };
-
- spic0_pins: spic0-pins {
- mux {
- function = "spi";
- groups = "spic0_0";
- };
- };
-
- spic1_pins: spic1-pins {
- mux {
- function = "spi";
- groups = "spic1_0";
- };
- };
-
- /* SPI-NOR is shared pin with serial NAND */
- spi_nor_pins: spi-nor-pins {
- mux {
- function = "flash";
- groups = "spi_nor";
- };
- };
-
- /* serial NAND is shared pin with SPI-NOR */
- serial_nand_pins: serial-nand-pins {
- mux {
- function = "flash";
- groups = "snfi";
- };
- };
-
- uart0_pins: uart0-pins {
- mux {
- function = "uart";
- groups = "uart0_0_tx_rx" ;
- };
- };
-
- uart2_pins: uart2-pins {
- mux {
- function = "uart";
- groups = "uart2_1_tx_rx" ;
- };
- };
-
- watchdog_pins: watchdog-pins {
- mux {
- function = "watchdog";
- groups = "watchdog";
- };
- };
-};
-
-&bch {
- status = "okay";
-};
-
-&btif {
- status = "okay";
-};
-
-&cir {
- pinctrl-names = "default";
- pinctrl-0 = <&irrx_pins>;
- status = "okay";
-};
-
-ð {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <ð_pins>;
- gmac0: mac@0 {
- compatible = "mediatek,eth-mac";
- reg = <0>;
- phy-mode = "sgmii";
- fixed-link {
- speed = <1000>;
- full-duplex;
- pause;
- };
- };
- gmac1: mac@1 {
- compatible = "mediatek,eth-mac";
- reg = <1>;
- phy-mode = "rgmii";
- fixed-link {
- speed = <1000>;
- full-duplex;
- pause;
- };
- };
- mdio: mdio-bus {
- #address-cells = <1>;
- #size-cells = <0>;
- };
-};
-
-&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
- status = "okay";
-};
-
-&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
- status = "okay";
-};
-
-&pwm {
- pinctrl-names = "default";
- pinctrl-0 = <&pwm7_pins>;
- status = "okay";
-};
-
-&pwrap {
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_bus_pins>;
-
- status = "okay";
-};
-
-&snfi {
- pinctrl-names = "default";
- pinctrl-0 = <&serial_nand_pins>;
- status = "okay";
-
- spi_nand@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spi-nand";
- spi-max-frequency = <104000000>;
- reg = <0>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "preloader";
- reg = <0x00000 0x0080000>;
- read-only;
- };
-
- partition@80000 {
- label = "ATF";
- reg = <0x80000 0x0040000>;
- read-only;
- };
-
- partition@c0000 {
- label = "uboot";
- reg = <0xc0000 0x0080000>;
- read-only;
- };
-
- partition@140000 {
- label = "uboot-env";
- reg = <0x140000 0x0080000>;
- read-only;
- };
-
- factory: partition@1c0000 {
- label = "factory";
- reg = <0x1c0000 0x0040000>;
- read-only;
- };
-
- partition@200000 {
- label = "firmware";
- reg = <0x200000 0x2000000>;
- };
-
- partition@2200000 {
- label = "reserved";
- reg = <0x2200000 0x4000000>;
- };
- };
- };
-};
-
-&spi0 {
- pinctrl-names = "default";
- pinctrl-0 = <&spic0_pins>;
- status = "okay";
-};
-
-&spi1 {
- pinctrl-names = "default";
- pinctrl-0 = <&spic1_pins>;
- status = "okay";
-};
-
-&ssusb {
- vusb33-supply = <®_3p3v>;
- vbus-supply = <®_usb_vbus>;
- status = "okay";
-};
-
-&u3phy {
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins>;
- status = "okay";
-};
-
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart2_pins>;
- status = "okay";
-};
-
-&watchdog {
- pinctrl-names = "default";
- pinctrl-0 = <&watchdog_pins>;
- status = "okay";
-};
-
-&wmac {
- mediatek,mtd-eeprom = <&factory 0x0000>;
- status = "okay";
-};
+++ /dev/null
-/*
- * Copyright (c) 2017 MediaTek Inc.
- * Author: Ming Huang <ming.huang@mediatek.com>
- * Sean Wang <sean.wang@mediatek.com>
- *
- * SPDX-License-Identifier: (GPL-2.0-only OR MIT)
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-#include "mt7622.dtsi"
-#include "mt6380.dtsi"
-
-/ {
- model = "MediaTek MT7622 RFB1 board";
- compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512";
- };
-
- cpus {
- cpu@0 {
- proc-supply = <&mt6380_vcpu_reg>;
- sram-supply = <&mt6380_vm_reg>;
- };
-
- cpu@1 {
- proc-supply = <&mt6380_vcpu_reg>;
- sram-supply = <&mt6380_vm_reg>;
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- poll-interval = <100>;
-
- factory {
- label = "factory";
- linux,code = <BTN_0>;
- gpios = <&pio 0 0>;
- };
-
- wps {
- label = "wps";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&pio 102 0>;
- };
- };
-
- gsw: gsw@0 {
- compatible = "mediatek,mt753x";
- mediatek,ethsys = <ðsys>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- memory {
- reg = <0 0x40000000 0 0x3F000000>;
- };
-
- reg_1p8v: regulator-1p8v {
- compatible = "regulator-fixed";
- regulator-name = "fixed-1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- reg_3p3v: regulator-3p3v {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- reg_5v: regulator-5v {
- compatible = "regulator-fixed";
- regulator-name = "fixed-5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-boot-on;
- regulator-always-on;
- };
-};
-
-&pcie {
- pinctrl-names = "default", "pcie1_pins";
- pinctrl-0 = <&pcie0_pins>;
- pinctrl-1 = <&pcie1_pins>;
- status = "okay";
-
- pcie@0,0 {
- status = "okay";
- };
-
- pcie@1,0 {
- status = "okay";
- };
-
-};
-
-&pio {
- /* eMMC is shared pin with parallel NAND */
- emmc_pins_default: emmc-pins-default {
- mux {
- function = "emmc", "emmc_rst";
- groups = "emmc";
- };
-
- /* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
- * "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4,
- * DAT5,DAT6,DAT7,CMD,CLK for eMMC respectively
- */
- conf-cmd-dat {
- pins = "NDL0", "NDL1", "NDL2",
- "NDL3", "NDL4", "NDL5",
- "NDL6", "NDL7", "NRB";
- input-enable;
- bias-pull-up;
- };
-
- conf-clk {
- pins = "NCLE";
- bias-pull-down;
- };
- };
-
- emmc_pins_uhs: emmc-pins-uhs {
- mux {
- function = "emmc";
- groups = "emmc";
- };
-
- conf-cmd-dat {
- pins = "NDL0", "NDL1", "NDL2",
- "NDL3", "NDL4", "NDL5",
- "NDL6", "NDL7", "NRB";
- input-enable;
- drive-strength = <4>;
- bias-pull-up;
- };
-
- conf-clk {
- pins = "NCLE";
- drive-strength = <4>;
- bias-pull-down;
- };
- };
-
- eth_pins: eth-pins {
- mux {
- function = "eth";
- groups = "mdc_mdio", "rgmii_via_gmac2";
- };
- };
-
- i2c1_pins: i2c1-pins {
- mux {
- function = "i2c";
- groups = "i2c1_0";
- };
- };
-
- i2c2_pins: i2c2-pins {
- mux {
- function = "i2c";
- groups = "i2c2_0";
- };
- };
-
- i2s1_pins: i2s1-pins {
- mux {
- function = "i2s";
- groups = "i2s_out_mclk_bclk_ws",
- "i2s1_in_data",
- "i2s1_out_data";
- };
-
- conf {
- pins = "I2S1_IN", "I2S1_OUT", "I2S_BCLK",
- "I2S_WS", "I2S_MCLK";
- drive-strength = <12>;
- bias-pull-down;
- };
- };
-
- irrx_pins: irrx-pins {
- mux {
- function = "ir";
- groups = "ir_1_rx";
- };
- };
-
- irtx_pins: irtx-pins {
- mux {
- function = "ir";
- groups = "ir_1_tx";
- };
- };
-
- /* Parallel nand is shared pin with eMMC */
- parallel_nand_pins: parallel-nand-pins {
- mux {
- function = "flash";
- groups = "par_nand";
- };
- };
-
- pcie0_pins: pcie0-pins {
- mux {
- function = "pcie";
- groups = "pcie0_pad_perst",
- "pcie0_1_waken",
- "pcie0_1_clkreq";
- };
- };
-
- pcie1_pins: pcie1-pins {
- mux {
- function = "pcie";
- groups = "pcie1_pad_perst",
- "pcie1_0_waken",
- "pcie1_0_clkreq";
- };
- };
-
- pmic_bus_pins: pmic-bus-pins {
- mux {
- function = "pmic";
- groups = "pmic_bus";
- };
- };
-
- pwm7_pins: pwm1-2-pins {
- mux {
- function = "pwm";
- groups = "pwm_ch7_2";
- };
- };
-
- wled_pins: wled-pins {
- mux {
- function = "led";
- groups = "wled";
- };
- };
-
- sd0_pins_default: sd0-pins-default {
- mux {
- function = "sd";
- groups = "sd_0";
- };
-
- /* "I2S2_OUT, "I2S4_IN"", "I2S3_IN", "I2S2_IN",
- * "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1,
- * DAT2, DAT3, CMD, CLK for SD respectively.
- */
- conf-cmd-data {
- pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
- "I2S2_IN","I2S4_OUT";
- input-enable;
- drive-strength = <8>;
- bias-pull-up;
- };
- conf-clk {
- pins = "I2S3_OUT";
- drive-strength = <12>;
- bias-pull-down;
- };
- conf-cd {
- pins = "TXD3";
- bias-pull-up;
- };
- };
-
- sd0_pins_uhs: sd0-pins-uhs {
- mux {
- function = "sd";
- groups = "sd_0";
- };
-
- conf-cmd-data {
- pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
- "I2S2_IN","I2S4_OUT";
- input-enable;
- bias-pull-up;
- };
-
- conf-clk {
- pins = "I2S3_OUT";
- bias-pull-down;
- };
- };
-
- /* Serial NAND is shared pin with SPI-NOR */
- serial_nand_pins: serial-nand-pins {
- mux {
- function = "flash";
- groups = "snfi";
- };
- };
-
- spic0_pins: spic0-pins {
- mux {
- function = "spi";
- groups = "spic0_0";
- };
- };
-
- spic1_pins: spic1-pins {
- mux {
- function = "spi";
- groups = "spic1_0";
- };
- };
-
- /* SPI-NOR is shared pin with serial NAND */
- spi_nor_pins: spi-nor-pins {
- mux {
- function = "flash";
- groups = "spi_nor";
- };
- };
-
- /* serial NAND is shared pin with SPI-NOR */
- serial_nand_pins: serial-nand-pins {
- mux {
- function = "flash";
- groups = "snfi";
- };
- };
-
- uart0_pins: uart0-pins {
- mux {
- function = "uart";
- groups = "uart0_0_tx_rx" ;
- };
- };
-
- uart2_pins: uart2-pins {
- mux {
- function = "uart";
- groups = "uart2_1_tx_rx" ;
- };
- };
-
- watchdog_pins: watchdog-pins {
- mux {
- function = "watchdog";
- groups = "watchdog";
- };
- };
-};
-
-&bch {
- status = "okay";
-};
-
-&btif {
- status = "okay";
-};
-
-&cir {
- pinctrl-names = "default";
- pinctrl-0 = <&irrx_pins>;
- status = "okay";
-};
-
-ð {
- status = "okay";
- gmac0: mac@0 {
- compatible = "mediatek,eth-mac";
- reg = <0>;
- phy-mode = "sgmii";
- fixed-link {
- speed = <1000>;
- full-duplex;
- pause;
- };
- };
- gmac1: mac@1 {
- compatible = "mediatek,eth-mac";
- reg = <1>;
- phy-mode = "rgmii";
- fixed-link {
- speed = <1000>;
- full-duplex;
- pause;
- };
- };
- mdio: mdio-bus {
- #address-cells = <1>;
- #size-cells = <0>;
- };
-};
-
-&gsw {
- mediatek,mdio = <&mdio>;
- mediatek,portmap = "llllw";
- mediatek,mdio_master_pinmux = <0>;
- reset-gpios = <&pio 54 0>;
- interrupt-parent = <&pio>;
- interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
- status = "okay";
-
- port5: port@5 {
- compatible = "mediatek,mt753x-port";
- reg = <5>;
- phy-mode = "rgmii";
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
-
- port6: port@6 {
- compatible = "mediatek,mt753x-port";
- reg = <6>;
- phy-mode = "sgmii";
- fixed-link {
- speed = <2500>;
- full-duplex;
- };
- };
-};
-
-&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
- status = "okay";
-};
-
-&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
- status = "okay";
-};
-
-&mmc0 {
- pinctrl-names = "default", "state_uhs";
- pinctrl-0 = <&emmc_pins_default>;
- pinctrl-1 = <&emmc_pins_uhs>;
- status = "okay";
- bus-width = <8>;
- max-frequency = <50000000>;
- cap-mmc-highspeed;
- mmc-hs200-1_8v;
- vmmc-supply = <®_3p3v>;
- vqmmc-supply = <®_1p8v>;
- assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>;
- assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
- non-removable;
-};
-
-&mmc1 {
- pinctrl-names = "default", "state_uhs";
- pinctrl-0 = <&sd0_pins_default>;
- pinctrl-1 = <&sd0_pins_uhs>;
- status = "okay";
- bus-width = <4>;
- max-frequency = <50000000>;
- cap-sd-highspeed;
- r_smpl = <1>;
- cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
- vmmc-supply = <®_3p3v>;
- vqmmc-supply = <®_3p3v>;
- assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>;
- assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
-};
-
-&nandc {
- pinctrl-names = "default";
- pinctrl-0 = <¶llel_nand_pins>;
- status = "disabled";
-};
-
-&nor_flash {
- pinctrl-names = "default";
- pinctrl-0 = <&spi_nor_pins>;
- status = "disabled";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- };
-};
-
-&pwm {
- pinctrl-names = "default";
- pinctrl-0 = <&pwm7_pins>;
- status = "okay";
-};
-
-&pwrap {
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_bus_pins>;
-
- status = "okay";
-};
-
-&snfi {
- pinctrl-names = "default";
- pinctrl-0 = <&serial_nand_pins>;
- status = "okay";
-
- spi_nand@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spi-nand";
- spi-max-frequency = <104000000>;
- reg = <0>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "preloader";
- reg = <0x00000 0x0080000>;
- read-only;
- };
-
- partition@80000 {
- label = "ATF";
- reg = <0x80000 0x0040000>;
- read-only;
- };
-
- partition@c0000 {
- label = "uboot";
- reg = <0xc0000 0x0080000>;
- read-only;
- };
-
- partition@140000 {
- label = "uboot-env";
- reg = <0x140000 0x0080000>;
- read-only;
- };
-
- partition@1c0000 {
- label = "factory";
- reg = <0x1c0000 0x0040000>;
- read-only;
- };
-
- partition@200000 {
- label = "firmware";
- reg = <0x200000 0x2000000>;
- };
-
- partition@2200000 {
- label = "reserved";
- reg = <0x2200000 0x4000000>;
- };
- };
- };
-};
-
-&spi0 {
- pinctrl-names = "default";
- pinctrl-0 = <&spic0_pins>;
- status = "okay";
-};
-
-&spi1 {
- pinctrl-names = "default";
- pinctrl-0 = <&spic1_pins>;
- status = "okay";
-};
-
-&ssusb {
- vusb33-supply = <®_3p3v>;
- vbus-supply = <®_5v>;
- status = "okay";
-};
-
-&u3phy {
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins>;
- status = "okay";
-};
-
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart2_pins>;
- status = "okay";
-};
-
-&watchdog {
- pinctrl-names = "default";
- pinctrl-0 = <&watchdog_pins>;
- status = "okay";
-};
+++ /dev/null
-/*
- * Copyright (c) 2017 MediaTek Inc.
- * Author: Ming Huang <ming.huang@mediatek.com>
- * Sean Wang <sean.wang@mediatek.com>
- *
- * SPDX-License-Identifier: (GPL-2.0-only OR MIT)
- */
-
-/dts-v1/;
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/gpio.h>
-
-#include "mt7622.dtsi"
-#include "mt6380.dtsi"
-
-/ {
- model = "MediaTek MT7622 RFB1 board";
- compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622";
-
- aliases {
- serial0 = &uart0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n1 swiotlb=512";
- };
-
- cpus {
- cpu@0 {
- proc-supply = <&mt6380_vcpu_reg>;
- sram-supply = <&mt6380_vm_reg>;
- };
-
- cpu@1 {
- proc-supply = <&mt6380_vcpu_reg>;
- sram-supply = <&mt6380_vm_reg>;
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- poll-interval = <100>;
-
- factory {
- label = "factory";
- linux,code = <BTN_0>;
- gpios = <&pio 0 0>;
- };
-
- wps {
- label = "wps";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&pio 102 0>;
- };
- };
-
- gsw: gsw@0 {
- compatible = "mediatek,mt753x";
- mediatek,ethsys = <ðsys>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- memory {
- reg = <0 0x40000000 0 0x3F000000>;
- };
-
- reg_1p8v: regulator-1p8v {
- compatible = "regulator-fixed";
- regulator-name = "fixed-1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- reg_3p3v: regulator-3p3v {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- reg_5v: regulator-5v {
- compatible = "regulator-fixed";
- regulator-name = "fixed-5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-boot-on;
- regulator-always-on;
- };
-};
-
-&pcie {
- pinctrl-names = "default", "pcie1_pins";
- pinctrl-0 = <&pcie0_pins>;
- pinctrl-1 = <&pcie1_pins>;
- status = "okay";
-
- pcie@0,0 {
- status = "okay";
- };
-
- pcie@1,0 {
- status = "okay";
- };
-
-};
-
-&pio {
- /* eMMC is shared pin with parallel NAND */
- emmc_pins_default: emmc-pins-default {
- mux {
- function = "emmc", "emmc_rst";
- groups = "emmc";
- };
-
- /* "NDL0","NDL1","NDL2","NDL3","NDL4","NDL5","NDL6","NDL7",
- * "NRB","NCLE" pins are used as DAT0,DAT1,DAT2,DAT3,DAT4,
- * DAT5,DAT6,DAT7,CMD,CLK for eMMC respectively
- */
- conf-cmd-dat {
- pins = "NDL0", "NDL1", "NDL2",
- "NDL3", "NDL4", "NDL5",
- "NDL6", "NDL7", "NRB";
- input-enable;
- bias-pull-up;
- };
-
- conf-clk {
- pins = "NCLE";
- bias-pull-down;
- };
- };
-
- emmc_pins_uhs: emmc-pins-uhs {
- mux {
- function = "emmc";
- groups = "emmc";
- };
-
- conf-cmd-dat {
- pins = "NDL0", "NDL1", "NDL2",
- "NDL3", "NDL4", "NDL5",
- "NDL6", "NDL7", "NRB";
- input-enable;
- drive-strength = <4>;
- bias-pull-up;
- };
-
- conf-clk {
- pins = "NCLE";
- drive-strength = <4>;
- bias-pull-down;
- };
- };
-
- eth_pins: eth-pins {
- mux {
- function = "eth";
- groups = "mdc_mdio", "rgmii_via_gmac2";
- };
- };
-
- i2c1_pins: i2c1-pins {
- mux {
- function = "i2c";
- groups = "i2c1_0";
- };
- };
-
- i2c2_pins: i2c2-pins {
- mux {
- function = "i2c";
- groups = "i2c2_0";
- };
- };
-
- i2s1_pins: i2s1-pins {
- mux {
- function = "i2s";
- groups = "i2s_out_mclk_bclk_ws",
- "i2s1_in_data",
- "i2s1_out_data";
- };
-
- conf {
- pins = "I2S1_IN", "I2S1_OUT", "I2S_BCLK",
- "I2S_WS", "I2S_MCLK";
- drive-strength = <12>;
- bias-pull-down;
- };
- };
-
- irrx_pins: irrx-pins {
- mux {
- function = "ir";
- groups = "ir_1_rx";
- };
- };
-
- irtx_pins: irtx-pins {
- mux {
- function = "ir";
- groups = "ir_1_tx";
- };
- };
-
- /* Parallel nand is shared pin with eMMC */
- parallel_nand_pins: parallel-nand-pins {
- mux {
- function = "flash";
- groups = "par_nand";
- };
- };
-
- pcie0_pins: pcie0-pins {
- mux {
- function = "pcie";
- groups = "pcie0_pad_perst",
- "pcie0_1_waken",
- "pcie0_1_clkreq";
- };
- };
-
- pcie1_pins: pcie1-pins {
- mux {
- function = "pcie";
- groups = "pcie1_pad_perst",
- "pcie1_0_waken",
- "pcie1_0_clkreq";
- };
- };
-
- pmic_bus_pins: pmic-bus-pins {
- mux {
- function = "pmic";
- groups = "pmic_bus";
- };
- };
-
- pwm7_pins: pwm1-2-pins {
- mux {
- function = "pwm";
- groups = "pwm_ch7_2";
- };
- };
-
- wled_pins: wled-pins {
- mux {
- function = "led";
- groups = "wled";
- };
- };
-
- sd0_pins_default: sd0-pins-default {
- mux {
- function = "sd";
- groups = "sd_0";
- };
-
- /* "I2S2_OUT, "I2S4_IN"", "I2S3_IN", "I2S2_IN",
- * "I2S4_OUT", "I2S3_OUT" are used as DAT0, DAT1,
- * DAT2, DAT3, CMD, CLK for SD respectively.
- */
- conf-cmd-data {
- pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
- "I2S2_IN","I2S4_OUT";
- input-enable;
- drive-strength = <8>;
- bias-pull-up;
- };
- conf-clk {
- pins = "I2S3_OUT";
- drive-strength = <12>;
- bias-pull-down;
- };
- conf-cd {
- pins = "TXD3";
- bias-pull-up;
- };
- };
-
- sd0_pins_uhs: sd0-pins-uhs {
- mux {
- function = "sd";
- groups = "sd_0";
- };
-
- conf-cmd-data {
- pins = "I2S2_OUT", "I2S4_IN", "I2S3_IN",
- "I2S2_IN","I2S4_OUT";
- input-enable;
- bias-pull-up;
- };
-
- conf-clk {
- pins = "I2S3_OUT";
- bias-pull-down;
- };
- };
-
- /* Serial NAND is shared pin with SPI-NOR */
- serial_nand_pins: serial-nand-pins {
- mux {
- function = "flash";
- groups = "snfi";
- };
- };
-
- spic0_pins: spic0-pins {
- mux {
- function = "spi";
- groups = "spic0_0";
- };
- };
-
- spic1_pins: spic1-pins {
- mux {
- function = "spi";
- groups = "spic1_0";
- };
- };
-
- /* SPI-NOR is shared pin with serial NAND */
- spi_nor_pins: spi-nor-pins {
- mux {
- function = "flash";
- groups = "spi_nor";
- };
- };
-
- /* serial NAND is shared pin with SPI-NOR */
- serial_nand_pins: serial-nand-pins {
- mux {
- function = "flash";
- groups = "snfi";
- };
- };
-
- uart0_pins: uart0-pins {
- mux {
- function = "uart";
- groups = "uart0_0_tx_rx" ;
- };
- };
-
- uart2_pins: uart2-pins {
- mux {
- function = "uart";
- groups = "uart2_1_tx_rx" ;
- };
- };
-
- watchdog_pins: watchdog-pins {
- mux {
- function = "watchdog";
- groups = "watchdog";
- };
- };
-};
-
-&bch {
- status = "okay";
-};
-
-&btif {
- status = "okay";
-};
-
-&cir {
- pinctrl-names = "default";
- pinctrl-0 = <&irrx_pins>;
- status = "okay";
-};
-
-ð {
- status = "okay";
- gmac0: mac@0 {
- compatible = "mediatek,eth-mac";
- reg = <0>;
- phy-mode = "sgmii";
- fixed-link {
- speed = <1000>;
- full-duplex;
- pause;
- };
- };
- gmac1: mac@1 {
- compatible = "mediatek,eth-mac";
- reg = <1>;
- phy-mode = "rgmii";
- fixed-link {
- speed = <1000>;
- full-duplex;
- pause;
- };
- };
- mdio: mdio-bus {
- #address-cells = <1>;
- #size-cells = <0>;
- };
-};
-
-&gsw {
- mediatek,mdio = <&mdio>;
- mediatek,portmap = "llllw";
- mediatek,mdio_master_pinmux = <0>;
- reset-gpios = <&pio 54 0>;
- interrupt-parent = <&pio>;
- interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
- status = "okay";
-
- port5: port@5 {
- compatible = "mediatek,mt753x-port";
- reg = <5>;
- phy-mode = "rgmii";
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
-
- port6: port@6 {
- compatible = "mediatek,mt753x-port";
- reg = <6>;
- phy-mode = "sgmii";
- fixed-link {
- speed = <2500>;
- full-duplex;
- };
- };
-};
-
-&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
- status = "okay";
-};
-
-&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
- status = "okay";
-};
-
-&mmc0 {
- pinctrl-names = "default", "state_uhs";
- pinctrl-0 = <&emmc_pins_default>;
- pinctrl-1 = <&emmc_pins_uhs>;
- status = "okay";
- bus-width = <8>;
- max-frequency = <50000000>;
- cap-mmc-highspeed;
- mmc-hs200-1_8v;
- vmmc-supply = <®_3p3v>;
- vqmmc-supply = <®_1p8v>;
- assigned-clocks = <&topckgen CLK_TOP_MSDC30_0_SEL>;
- assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
- non-removable;
-};
-
-&mmc1 {
- pinctrl-names = "default", "state_uhs";
- pinctrl-0 = <&sd0_pins_default>;
- pinctrl-1 = <&sd0_pins_uhs>;
- status = "okay";
- bus-width = <4>;
- max-frequency = <50000000>;
- cap-sd-highspeed;
- r_smpl = <1>;
- cd-gpios = <&pio 81 GPIO_ACTIVE_LOW>;
- vmmc-supply = <®_3p3v>;
- vqmmc-supply = <®_3p3v>;
- assigned-clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>;
- assigned-clock-parents = <&topckgen CLK_TOP_UNIV48M>;
-};
-
-&nandc {
- pinctrl-names = "default";
- pinctrl-0 = <¶llel_nand_pins>;
- status = "disabled";
-};
-
-&nor_flash {
- pinctrl-names = "default";
- pinctrl-0 = <&spi_nor_pins>;
- status = "disabled";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- };
-};
-
-&pwm {
- pinctrl-names = "default";
- pinctrl-0 = <&pwm7_pins>;
- status = "okay";
-};
-
-&pwrap {
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_bus_pins>;
-
- status = "okay";
-};
-
-&snfi {
- pinctrl-names = "default";
- pinctrl-0 = <&serial_nand_pins>;
- status = "okay";
-
- spi_nand@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "spi-nand";
- spi-max-frequency = <104000000>;
- reg = <0>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "preloader";
- reg = <0x00000 0x0080000>;
- read-only;
- };
-
- partition@80000 {
- label = "ATF";
- reg = <0x80000 0x0040000>;
- read-only;
- };
-
- partition@c0000 {
- label = "uboot";
- reg = <0xc0000 0x0080000>;
- read-only;
- };
-
- partition@140000 {
- label = "uboot-env";
- reg = <0x140000 0x0080000>;
- read-only;
- };
-
- partition@1c0000 {
- label = "factory";
- reg = <0x1c0000 0x0040000>;
- read-only;
- };
-
- partition@200000 {
- label = "firmware";
- reg = <0x200000 0x2000000>;
- };
-
- partition@2200000 {
- label = "reserved";
- reg = <0x2200000 0x4000000>;
- };
- };
- };
-};
-
-&spi0 {
- pinctrl-names = "default";
- pinctrl-0 = <&spic0_pins>;
- status = "okay";
-};
-
-&spi1 {
- pinctrl-names = "default";
- pinctrl-0 = <&spic1_pins>;
- status = "okay";
-};
-
-&ssusb {
- vusb33-supply = <®_3p3v>;
- vbus-supply = <®_5v>;
- status = "okay";
-};
-
-&u3phy {
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins>;
- status = "okay";
-};
-
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart2_pins>;
- status = "okay";
-};
-
-&watchdog {
- pinctrl-names = "default";
- pinctrl-0 = <&watchdog_pins>;
- status = "okay";
-};
+++ /dev/null
-/*
- * Copyright (c) 2017 MediaTek Inc.
- * Author: Ming Huang <ming.huang@mediatek.com>
- * Sean Wang <sean.wang@mediatek.com>
- *
- * SPDX-License-Identifier: (GPL-2.0-only OR MIT)
- */
-
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/clock/mt7622-clk.h>
-#include <dt-bindings/phy/phy.h>
-#include <dt-bindings/power/mt7622-power.h>
-#include <dt-bindings/reset/mt7622-reset.h>
-#include <dt-bindings/thermal/thermal.h>
-
-/ {
- compatible = "mediatek,mt7622";
- interrupt-parent = <&sysirq>;
- #address-cells = <2>;
- #size-cells = <2>;
-
- cpu_opp_table: opp-table {
- compatible = "operating-points-v2";
- opp-shared;
- opp-300000000 {
- opp-hz = /bits/ 64 <30000000>;
- opp-microvolt = <950000>;
- };
-
- opp-437500000 {
- opp-hz = /bits/ 64 <437500000>;
- opp-microvolt = <1000000>;
- };
-
- opp-600000000 {
- opp-hz = /bits/ 64 <600000000>;
- opp-microvolt = <1050000>;
- };
-
- opp-812500000 {
- opp-hz = /bits/ 64 <812500000>;
- opp-microvolt = <1100000>;
- };
-
- opp-1025000000 {
- opp-hz = /bits/ 64 <1025000000>;
- opp-microvolt = <1150000>;
- };
-
- opp-1137500000 {
- opp-hz = /bits/ 64 <1137500000>;
- opp-microvolt = <1200000>;
- };
-
- opp-1262500000 {
- opp-hz = /bits/ 64 <1262500000>;
- opp-microvolt = <1250000>;
- };
-
- opp-1350000000 {
- opp-hz = /bits/ 64 <1350000000>;
- opp-microvolt = <1310000>;
- };
- };
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- cpu0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a53", "arm,armv8";
- reg = <0x0 0x0>;
- clocks = <&infracfg CLK_INFRA_MUX1_SEL>,
- <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>;
- clock-names = "cpu", "intermediate";
- operating-points-v2 = <&cpu_opp_table>;
- #cooling-cells = <2>;
- enable-method = "psci";
- clock-frequency = <1300000000>;
- };
-
- cpu1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a53", "arm,armv8";
- reg = <0x0 0x1>;
- clocks = <&infracfg CLK_INFRA_MUX1_SEL>,
- <&apmixedsys CLK_APMIXED_MAIN_CORE_EN>;
- clock-names = "cpu", "intermediate";
- operating-points-v2 = <&cpu_opp_table>;
- #cooling-cells = <2>;
- enable-method = "psci";
- clock-frequency = <1300000000>;
- };
- };
-
- pwrap_clk: dummy40m {
- compatible = "fixed-clock";
- clock-frequency = <40000000>;
- #clock-cells = <0>;
- };
-
- clk25m: oscillator {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <25000000>;
- clock-output-names = "clkxtal";
- };
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- };
-
- reserved-memory {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- /* 192 KiB reserved for ARM Trusted Firmware (BL31) */
- secmon_reserved: secmon@43000000 {
- reg = <0 0x43000000 0 0x30000>;
- no-map;
- };
- };
-
- thermal-zones {
- cpu_thermal: cpu-thermal {
- polling-delay-passive = <1000>;
- polling-delay = <1000>;
-
- thermal-sensors = <&thermal 0>;
-
- trips {
- cpu_passive: cpu-passive {
- temperature = <47000>;
- hysteresis = <2000>;
- type = "passive";
- };
-
- cpu_active: cpu-active {
- temperature = <67000>;
- hysteresis = <2000>;
- type = "active";
- };
-
- cpu_hot: cpu-hot {
- temperature = <87000>;
- hysteresis = <2000>;
- type = "hot";
- };
-
- cpu-crit {
- temperature = <107000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&cpu_passive>;
- cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
-
- map1 {
- trip = <&cpu_active>;
- cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
-
- map2 {
- trip = <&cpu_hot>;
- cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
- };
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupt-parent = <&gic>;
- interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
- IRQ_TYPE_LEVEL_HIGH)>,
- <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
- IRQ_TYPE_LEVEL_HIGH)>,
- <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
- IRQ_TYPE_LEVEL_HIGH)>,
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
- IRQ_TYPE_LEVEL_HIGH)>;
- };
-
- infracfg: infracfg@10000000 {
- compatible = "mediatek,mt7622-infracfg",
- "syscon";
- reg = <0 0x10000000 0 0x1000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
- pwrap: pwrap@10001000 {
- compatible = "mediatek,mt7622-pwrap";
- reg = <0 0x10001000 0 0x250>;
- reg-names = "pwrap";
- clocks = <&infracfg CLK_INFRA_PMIC_PD>, <&pwrap_clk>;
- clock-names = "spi", "wrap";
- resets = <&infracfg MT7622_INFRA_PMIC_WRAP_RST>;
- reset-names = "pwrap";
- interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- pericfg: pericfg@10002000 {
- compatible = "mediatek,mt7622-pericfg",
- "syscon";
- reg = <0 0x10002000 0 0x1000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
- scpsys: scpsys@10006000 {
- compatible = "mediatek,mt7622-scpsys",
- "syscon";
- #power-domain-cells = <1>;
- reg = <0 0x10006000 0 0x1000>;
- interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 166 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 167 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 168 IRQ_TYPE_LEVEL_LOW>;
- infracfg = <&infracfg>;
- clocks = <&topckgen CLK_TOP_HIF_SEL>;
- clock-names = "hif_sel";
- };
-
- cir: cir@10009000 {
- compatible = "mediatek,mt7622-cir";
- reg = <0 0x10009000 0 0x1000>;
- interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&infracfg CLK_INFRA_IRRX_PD>,
- <&topckgen CLK_TOP_AXI_SEL>;
- clock-names = "clk", "bus";
- status = "disabled";
- };
-
- sysirq: interrupt-controller@10200620 {
- compatible = "mediatek,mt7622-sysirq",
- "mediatek,mt6577-sysirq";
- interrupt-controller;
- #interrupt-cells = <3>;
- interrupt-parent = <&gic>;
- reg = <0 0x10200620 0 0x20>;
- };
-
- efuse: efuse@10206000 {
- compatible = "mediatek,mt7622-efuse",
- "mediatek,efuse";
- reg = <0 0x10206000 0 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- thermal_calibration: calib@198 {
- reg = <0x198 0xc>;
- };
- };
-
- apmixedsys: apmixedsys@10209000 {
- compatible = "mediatek,mt7622-apmixedsys",
- "syscon";
- reg = <0 0x10209000 0 0x1000>;
- #clock-cells = <1>;
- };
-
- topckgen: topckgen@10210000 {
- compatible = "mediatek,mt7622-topckgen",
- "syscon";
- reg = <0 0x10210000 0 0x1000>;
- #clock-cells = <1>;
- };
-
- rng: rng@1020f000 {
- compatible = "mediatek,mt7622-rng",
- "mediatek,mt7623-rng";
- reg = <0 0x1020f000 0 0x1000>;
- clocks = <&infracfg CLK_INFRA_TRNG>;
- clock-names = "rng";
- };
-
- pio: pinctrl@10211000 {
- compatible = "mediatek,mt7622-pinctrl";
- reg = <0 0x10211000 0 0x1000>,
- <0 0x10005000 0 0x1000>;
- reg-names = "base", "eint";
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&pio 0 0 103>;
- interrupt-controller;
- interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-parent = <&gic>;
- #interrupt-cells = <2>;
- };
-
- watchdog: watchdog@10212000 {
- compatible = "mediatek,mt7622-wdt",
- "mediatek,mt6589-wdt";
- reg = <0 0x10212000 0 0x800>;
- };
-
- rtc: rtc@10212800 {
- compatible = "mediatek,mt7622-rtc",
- "mediatek,soc-rtc";
- reg = <0 0x10212800 0 0x200>;
- interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&topckgen CLK_TOP_RTC>;
- clock-names = "rtc";
- };
-
- gic: interrupt-controller@10300000 {
- compatible = "arm,gic-400";
- interrupt-controller;
- #interrupt-cells = <3>;
- interrupt-parent = <&gic>;
- reg = <0 0x10310000 0 0x1000>,
- <0 0x10320000 0 0x1000>,
- <0 0x10340000 0 0x2000>,
- <0 0x10360000 0 0x2000>;
- };
-
- auxadc: adc@11001000 {
- compatible = "mediatek,mt7622-auxadc";
- reg = <0 0x11001000 0 0x1000>;
- clocks = <&pericfg CLK_PERI_AUXADC_PD>;
- clock-names = "main";
- #io-channel-cells = <1>;
- };
-
- uart0: serial@11002000 {
- compatible = "mediatek,mt7622-uart",
- "mediatek,mt6577-uart";
- reg = <0 0x11002000 0 0x400>;
- interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&topckgen CLK_TOP_UART_SEL>,
- <&pericfg CLK_PERI_UART0_PD>;
- clock-names = "baud", "bus";
- status = "disabled";
- };
-
- uart1: serial@11003000 {
- compatible = "mediatek,mt7622-uart",
- "mediatek,mt6577-uart";
- reg = <0 0x11003000 0 0x400>;
- interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&topckgen CLK_TOP_UART_SEL>,
- <&pericfg CLK_PERI_UART1_PD>;
- clock-names = "baud", "bus";
- status = "disabled";
- };
-
- uart2: serial@11004000 {
- compatible = "mediatek,mt7622-uart",
- "mediatek,mt6577-uart";
- reg = <0 0x11004000 0 0x400>;
- interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&topckgen CLK_TOP_UART_SEL>,
- <&pericfg CLK_PERI_UART2_PD>;
- clock-names = "baud", "bus";
- status = "disabled";
- };
-
- uart3: serial@11005000 {
- compatible = "mediatek,mt7622-uart",
- "mediatek,mt6577-uart";
- reg = <0 0x11005000 0 0x400>;
- interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&topckgen CLK_TOP_UART_SEL>,
- <&pericfg CLK_PERI_UART3_PD>;
- clock-names = "baud", "bus";
- status = "disabled";
- };
-
- pwm: pwm@11006000 {
- compatible = "mediatek,mt7622-pwm";
- reg = <0 0x11006000 0 0x1000>;
- interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&topckgen CLK_TOP_PWM_SEL>,
- <&pericfg CLK_PERI_PWM_PD>,
- <&pericfg CLK_PERI_PWM1_PD>,
- <&pericfg CLK_PERI_PWM2_PD>,
- <&pericfg CLK_PERI_PWM3_PD>,
- <&pericfg CLK_PERI_PWM4_PD>,
- <&pericfg CLK_PERI_PWM5_PD>,
- <&pericfg CLK_PERI_PWM6_PD>;
- clock-names = "top", "main", "pwm1", "pwm2", "pwm3", "pwm4",
- "pwm5", "pwm6";
- status = "disabled";
- };
-
- i2c0: i2c@11007000 {
- compatible = "mediatek,mt7622-i2c";
- reg = <0 0x11007000 0 0x90>,
- <0 0x11000100 0 0x80>;
- interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
- clock-div = <16>;
- clocks = <&pericfg CLK_PERI_I2C0_PD>,
- <&pericfg CLK_PERI_AP_DMA_PD>;
- clock-names = "main", "dma";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c1: i2c@11008000 {
- compatible = "mediatek,mt7622-i2c";
- reg = <0 0x11008000 0 0x90>,
- <0 0x11000180 0 0x80>;
- interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
- clock-div = <16>;
- clocks = <&pericfg CLK_PERI_I2C1_PD>,
- <&pericfg CLK_PERI_AP_DMA_PD>;
- clock-names = "main", "dma";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c2: i2c@11009000 {
- compatible = "mediatek,mt7622-i2c";
- reg = <0 0x11009000 0 0x90>,
- <0 0x11000200 0 0x80>;
- interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
- clock-div = <16>;
- clocks = <&pericfg CLK_PERI_I2C2_PD>,
- <&pericfg CLK_PERI_AP_DMA_PD>;
- clock-names = "main", "dma";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- spi0: spi@1100a000 {
- compatible = "mediatek,mt7622-spi";
- reg = <0 0x1100a000 0 0x100>;
- interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
- <&topckgen CLK_TOP_SPI0_SEL>,
- <&pericfg CLK_PERI_SPI0_PD>;
- clock-names = "parent-clk", "sel-clk", "spi-clk";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- thermal: thermal@1100b000 {
- #thermal-sensor-cells = <1>;
- compatible = "mediatek,mt7622-thermal";
- reg = <0 0x1100b000 0 0x1000>;
- interrupts = <0 78 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&pericfg CLK_PERI_THERM_PD>,
- <&pericfg CLK_PERI_AUXADC_PD>;
- clock-names = "therm", "auxadc";
- resets = <&pericfg MT7622_PERI_THERM_SW_RST>;
- reset-names = "therm";
- mediatek,auxadc = <&auxadc>;
- mediatek,apmixedsys = <&apmixedsys>;
- nvmem-cells = <&thermal_calibration>;
- nvmem-cell-names = "calibration-data";
- };
-
- btif: serial@1100c000 {
- compatible = "mediatek,mt7622-btif",
- "mediatek,mtk-btif";
- reg = <0 0x1100c000 0 0x1000>;
- interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&pericfg CLK_PERI_BTIF_PD>;
- clock-names = "main";
- reg-shift = <2>;
- reg-io-width = <4>;
- status = "disabled";
-
- bluetooth {
- compatible = "mediatek,mt7622-bluetooth";
- power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>;
- clocks = <&clk25m>;
- clock-names = "ref";
- };
- };
-
- nandc: nfi@1100d000 {
- compatible = "mediatek,mt7622-nfc";
- reg = <0 0x1100D000 0 0x1000>;
- interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&pericfg CLK_PERI_NFI_PD>,
- <&pericfg CLK_PERI_SNFI_PD>;
- clock-names = "nfi_clk", "pad_clk";
- ecc-engine = <&bch>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- bch: ecc@1100e000 {
- compatible = "mediatek,mt7622-ecc";
- reg = <0 0x1100e000 0 0x1000>;
- interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&pericfg CLK_PERI_NFIECC_PD>;
- clock-names = "nfiecc_clk";
- status = "disabled";
- };
-
- nor_flash: spi@11014000 {
- compatible = "mediatek,mt7622-nor",
- "mediatek,mt8173-nor";
- reg = <0 0x11014000 0 0xe0>;
- clocks = <&pericfg CLK_PERI_FLASH_PD>,
- <&topckgen CLK_TOP_FLASH_SEL>;
- clock-names = "spi", "sf";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- snfi: spi@1100d000 {
- compatible = "mediatek,mt7622-snfi";
- reg = <0 0x1100d000 0 0x1000>;
- interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&pericfg CLK_PERI_NFI_PD>,
- <&pericfg CLK_PERI_SNFI_PD>;
- clock-names = "nfi_clk", "spi_clk";
- ecc-engine = <&bch>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- spi1: spi@11016000 {
- compatible = "mediatek,mt7622-spi";
- reg = <0 0x11016000 0 0x100>;
- interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
- <&topckgen CLK_TOP_SPI1_SEL>,
- <&pericfg CLK_PERI_SPI1_PD>;
- clock-names = "parent-clk", "sel-clk", "spi-clk";
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- uart4: serial@11019000 {
- compatible = "mediatek,mt7622-uart",
- "mediatek,mt6577-uart";
- reg = <0 0x11019000 0 0x400>;
- interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&topckgen CLK_TOP_UART_SEL>,
- <&pericfg CLK_PERI_UART4_PD>;
- clock-names = "baud", "bus";
- status = "disabled";
- };
-
- audsys: clock-controller@11220000 {
- compatible = "mediatek,mt7622-audsys", "syscon";
- reg = <0 0x11220000 0 0x2000>;
- #clock-cells = <1>;
-
- afe: audio-controller {
- compatible = "mediatek,mt7622-audio";
- interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 145 IRQ_TYPE_LEVEL_LOW>;
- interrupt-names = "afe", "asys";
-
- clocks = <&infracfg CLK_INFRA_AUDIO_PD>,
- <&topckgen CLK_TOP_AUD1_SEL>,
- <&topckgen CLK_TOP_AUD2_SEL>,
- <&topckgen CLK_TOP_A1SYS_HP_DIV_PD>,
- <&topckgen CLK_TOP_A2SYS_HP_DIV_PD>,
- <&topckgen CLK_TOP_I2S0_MCK_SEL>,
- <&topckgen CLK_TOP_I2S1_MCK_SEL>,
- <&topckgen CLK_TOP_I2S2_MCK_SEL>,
- <&topckgen CLK_TOP_I2S3_MCK_SEL>,
- <&topckgen CLK_TOP_I2S0_MCK_DIV>,
- <&topckgen CLK_TOP_I2S1_MCK_DIV>,
- <&topckgen CLK_TOP_I2S2_MCK_DIV>,
- <&topckgen CLK_TOP_I2S3_MCK_DIV>,
- <&topckgen CLK_TOP_I2S0_MCK_DIV_PD>,
- <&topckgen CLK_TOP_I2S1_MCK_DIV_PD>,
- <&topckgen CLK_TOP_I2S2_MCK_DIV_PD>,
- <&topckgen CLK_TOP_I2S3_MCK_DIV_PD>,
- <&audsys CLK_AUDIO_I2SO1>,
- <&audsys CLK_AUDIO_I2SO2>,
- <&audsys CLK_AUDIO_I2SO3>,
- <&audsys CLK_AUDIO_I2SO4>,
- <&audsys CLK_AUDIO_I2SIN1>,
- <&audsys CLK_AUDIO_I2SIN2>,
- <&audsys CLK_AUDIO_I2SIN3>,
- <&audsys CLK_AUDIO_I2SIN4>,
- <&audsys CLK_AUDIO_ASRCO1>,
- <&audsys CLK_AUDIO_ASRCO2>,
- <&audsys CLK_AUDIO_ASRCO3>,
- <&audsys CLK_AUDIO_ASRCO4>,
- <&audsys CLK_AUDIO_AFE>,
- <&audsys CLK_AUDIO_AFE_CONN>,
- <&audsys CLK_AUDIO_A1SYS>,
- <&audsys CLK_AUDIO_A2SYS>;
-
- clock-names = "infra_sys_audio_clk",
- "top_audio_mux1_sel",
- "top_audio_mux2_sel",
- "top_audio_a1sys_hp",
- "top_audio_a2sys_hp",
- "i2s0_src_sel",
- "i2s1_src_sel",
- "i2s2_src_sel",
- "i2s3_src_sel",
- "i2s0_src_div",
- "i2s1_src_div",
- "i2s2_src_div",
- "i2s3_src_div",
- "i2s0_mclk_en",
- "i2s1_mclk_en",
- "i2s2_mclk_en",
- "i2s3_mclk_en",
- "i2so0_hop_ck",
- "i2so1_hop_ck",
- "i2so2_hop_ck",
- "i2so3_hop_ck",
- "i2si0_hop_ck",
- "i2si1_hop_ck",
- "i2si2_hop_ck",
- "i2si3_hop_ck",
- "asrc0_out_ck",
- "asrc1_out_ck",
- "asrc2_out_ck",
- "asrc3_out_ck",
- "audio_afe_pd",
- "audio_afe_conn_pd",
- "audio_a1sys_pd",
- "audio_a2sys_pd";
-
- assigned-clocks = <&topckgen CLK_TOP_A1SYS_HP_SEL>,
- <&topckgen CLK_TOP_A2SYS_HP_SEL>,
- <&topckgen CLK_TOP_A1SYS_HP_DIV>,
- <&topckgen CLK_TOP_A2SYS_HP_DIV>;
- assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL>,
- <&topckgen CLK_TOP_AUD2PLL>;
- assigned-clock-rates = <0>, <0>, <49152000>, <45158400>;
- };
- };
-
- mmc0: mmc@11230000 {
- compatible = "mediatek,mt7622-mmc";
- reg = <0 0x11230000 0 0x1000>;
- interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&pericfg CLK_PERI_MSDC30_0_PD>,
- <&topckgen CLK_TOP_MSDC50_0_SEL>;
- clock-names = "source", "hclk";
- status = "disabled";
- };
-
- mmc1: mmc@11240000 {
- compatible = "mediatek,mt7622-mmc";
- reg = <0 0x11240000 0 0x1000>;
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&pericfg CLK_PERI_MSDC30_1_PD>,
- <&topckgen CLK_TOP_AXI_SEL>;
- clock-names = "source", "hclk";
- status = "disabled";
- };
-
- wmac: wmac@18000000 {
- compatible = "mediatek,mt7622-wmac";
- reg = <0 0x18000000 0 0x100000>;
- interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_LOW>;
-
- mediatek,infracfg = <&infracfg>;
- status = "disabled";
-
- power-domains = <&scpsys MT7622_POWER_DOMAIN_WB>;
- };
-
- ssusbsys: ssusbsys@1a000000 {
- compatible = "mediatek,mt7622-ssusbsys",
- "syscon";
- reg = <0 0x1a000000 0 0x1000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
- ssusb: usb@1a0c0000 {
- compatible = "mediatek,mt7622-xhci",
- "mediatek,mtk-xhci";
- reg = <0 0x1a0c0000 0 0x01000>,
- <0 0x1a0c4700 0 0x0100>;
- reg-names = "mac", "ippc";
- interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
- power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF1>;
- clocks = <&ssusbsys CLK_SSUSB_SYS_EN>,
- <&ssusbsys CLK_SSUSB_REF_EN>,
- <&ssusbsys CLK_SSUSB_MCU_EN>,
- <&ssusbsys CLK_SSUSB_DMA_EN>;
- clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
- phys = <&u2port0 PHY_TYPE_USB2>,
- <&u3port0 PHY_TYPE_USB3>,
- <&u2port1 PHY_TYPE_USB2>;
-
- status = "disabled";
- };
-
- u3phy: usb-phy@1a0c4000 {
- compatible = "mediatek,mt7622-u3phy",
- "mediatek,generic-tphy-v1";
- reg = <0 0x1a0c4000 0 0x700>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- status = "disabled";
-
- u2port0: usb-phy@1a0c4800 {
- reg = <0 0x1a0c4800 0 0x0100>;
- #phy-cells = <1>;
- clocks = <&ssusbsys CLK_SSUSB_U2_PHY_EN>;
- clock-names = "ref";
- };
-
- u3port0: usb-phy@1a0c4900 {
- reg = <0 0x1a0c4900 0 0x0700>;
- #phy-cells = <1>;
- clocks = <&clk25m>;
- clock-names = "ref";
- };
-
- u2port1: usb-phy@1a0c5000 {
- reg = <0 0x1a0c5000 0 0x0100>;
- #phy-cells = <1>;
- clocks = <&ssusbsys CLK_SSUSB_U2_PHY_1P_EN>;
- clock-names = "ref";
- };
- };
-
- pciesys: pciesys@1a100800 {
- compatible = "mediatek,mt7622-pciesys",
- "syscon";
- reg = <0 0x1a100800 0 0x1000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
- pcie: pcie@1a140000 {
- compatible = "mediatek,mt7622-pcie";
- device_type = "pci";
- reg = <0 0x1a140000 0 0x1000>,
- <0 0x1a143000 0 0x1000>,
- <0 0x1a145000 0 0x1000>;
- reg-names = "subsys", "port0", "port1";
- #address-cells = <3>;
- #size-cells = <2>;
- interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&pciesys CLK_PCIE_P0_MAC_EN>,
- <&pciesys CLK_PCIE_P1_MAC_EN>,
- <&pciesys CLK_PCIE_P0_AHB_EN>,
- <&pciesys CLK_PCIE_P0_AHB_EN>,
- <&pciesys CLK_PCIE_P0_AUX_EN>,
- <&pciesys CLK_PCIE_P1_AUX_EN>,
- <&pciesys CLK_PCIE_P0_AXI_EN>,
- <&pciesys CLK_PCIE_P1_AXI_EN>,
- <&pciesys CLK_PCIE_P0_OBFF_EN>,
- <&pciesys CLK_PCIE_P1_OBFF_EN>,
- <&pciesys CLK_PCIE_P0_PIPE_EN>,
- <&pciesys CLK_PCIE_P1_PIPE_EN>;
- clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1",
- "aux_ck0", "aux_ck1", "axi_ck0", "axi_ck1",
- "obff_ck0", "obff_ck1", "pipe_ck0", "pipe_ck1";
- power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
- bus-range = <0x00 0xff>;
- ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>;
- status = "disabled";
-
- pcie0: pcie@0,0 {
- reg = <0x0000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- ranges;
- status = "disabled";
-
- num-lanes = <1>;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &pcie_intc0 0>,
- <0 0 0 2 &pcie_intc0 1>,
- <0 0 0 3 &pcie_intc0 2>,
- <0 0 0 4 &pcie_intc0 3>;
- pcie_intc0: interrupt-controller {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <1>;
- };
- };
-
- pcie1: pcie@1,0 {
- reg = <0x0800 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- ranges;
- status = "disabled";
-
- num-lanes = <1>;
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &pcie_intc1 0>,
- <0 0 0 2 &pcie_intc1 1>,
- <0 0 0 3 &pcie_intc1 2>,
- <0 0 0 4 &pcie_intc1 3>;
- pcie_intc1: interrupt-controller {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <1>;
- };
- };
- };
-
- sata: sata@1a200000 {
- compatible = "mediatek,mt7622-ahci",
- "mediatek,mtk-ahci";
- reg = <0 0x1a200000 0 0x1100>;
- interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hostc";
- clocks = <&pciesys CLK_SATA_AHB_EN>,
- <&pciesys CLK_SATA_AXI_EN>,
- <&pciesys CLK_SATA_ASIC_EN>,
- <&pciesys CLK_SATA_RBC_EN>,
- <&pciesys CLK_SATA_PM_EN>;
- clock-names = "ahb", "axi", "asic", "rbc", "pm";
- phys = <&sata_port PHY_TYPE_SATA>;
- phy-names = "sata-phy";
- ports-implemented = <0x1>;
- power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
- resets = <&pciesys MT7622_SATA_AXI_BUS_RST>,
- <&pciesys MT7622_SATA_PHY_SW_RST>,
- <&pciesys MT7622_SATA_PHY_REG_RST>;
- reset-names = "axi", "sw", "reg";
- mediatek,phy-mode = <&pciesys>;
- status = "disabled";
- };
-
- sata_phy: sata-phy@1a243000 {
- compatible = "mediatek,generic-tphy-v1";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- status = "disabled";
-
- sata_port: sata-phy@1a243000 {
- reg = <0 0x1a243000 0 0x0100>;
- clocks = <&topckgen CLK_TOP_ETH_500M>;
- clock-names = "ref";
- #phy-cells = <1>;
- };
- };
-
- ethsys: syscon@1b000000 {
- compatible = "mediatek,mt7622-ethsys",
- "syscon";
- reg = <0 0x1b000000 0 0x1000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
- hsdma: dma-controller@1b007000 {
- compatible = "mediatek,mt7622-hsdma";
- reg = <0 0x1b007000 0 0x1000>;
- interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_LOW>;
- clocks = <ðsys CLK_ETH_HSDMA_EN>;
- clock-names = "hsdma";
- power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>;
- #dma-cells = <1>;
- };
-
- eth: ethernet@1b100000 {
- compatible = "mediatek,mt7622-eth",
- "mediatek,mt2701-eth",
- "syscon";
- reg = <0 0x1b100000 0 0x20000>;
- interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 224 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&topckgen CLK_TOP_ETH_SEL>,
- <ðsys CLK_ETH_ESW_EN>,
- <ðsys CLK_ETH_GP0_EN>,
- <ðsys CLK_ETH_GP1_EN>,
- <ðsys CLK_ETH_GP2_EN>,
- <&sgmiisys CLK_SGMII_TX250M_EN>,
- <&sgmiisys CLK_SGMII_RX250M_EN>,
- <&sgmiisys CLK_SGMII_CDR_REF>,
- <&sgmiisys CLK_SGMII_CDR_FB>,
- <&topckgen CLK_TOP_SGMIIPLL>,
- <&apmixedsys CLK_APMIXED_ETH2PLL>;
- clock-names = "ethif", "esw", "gp0", "gp1", "gp2",
- "sgmii_tx250m", "sgmii_rx250m",
- "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii_ck",
- "eth2pll";
- power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>;
- mediatek,ethsys = <ðsys>;
- mediatek,sgmiisys = <&sgmiisys>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- sgmiisys: sgmiisys@1b128000 {
- compatible = "mediatek,mt7622-sgmiisys",
- "syscon";
- reg = <0 0x1b128000 0 0x3000>;
- #clock-cells = <1>;
- mediatek,physpeed = "2500";
- };
-};
+++ /dev/null
-
-config MT753X_GSW
- tristate "Driver for the MediaTek MT753x switch"
+++ /dev/null
-#
-# Makefile for MediaTek MT753x gigabit switch
-#
-
-obj-$(CONFIG_MT753X_GSW) += mt753x.o
-
-mt753x-$(CONFIG_SWCONFIG) += mt753x_swconfig.o
-
-mt753x-y += mt753x_mdio.o mt7530.o mt7531.o \
- mt753x_common.o mt753x_vlan.o \
- mt753x_nl.o
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2018 MediaTek Inc.
- * Author: Weijie Gao <weijie.gao@mediatek.com>
- */
-
-#include <linux/kernel.h>
-#include <linux/delay.h>
-
-#include "mt753x.h"
-#include "mt753x_regs.h"
-
-/* MT7530 registers */
-
-/* Unique fields of PMCR for MT7530 */
-#define FORCE_MODE BIT(15)
-
-/* Unique fields of GMACCR for MT7530 */
-#define VLAN_SUPT_NO_S 14
-#define VLAN_SUPT_NO_M 0x1c000
-#define LATE_COL_DROP BIT(13)
-
-/* Unique fields of (M)HWSTRAP for MT7530 */
-#define BOND_OPTION BIT(24)
-#define P5_PHY0_SEL BIT(20)
-#define CHG_TRAP BIT(16)
-#define LOOPDET_DIS BIT(14)
-#define P5_INTF_SEL_GMAC5 BIT(13)
-#define SMI_ADDR_S 11
-#define SMI_ADDR_M 0x1800
-#define XTAL_FSEL_S 9
-#define XTAL_FSEL_M 0x600
-#define P6_INTF_DIS BIT(8)
-#define P5_INTF_MODE_RGMII BIT(7)
-#define P5_INTF_DIS_S BIT(6)
-#define C_MDIO_BPS_S BIT(5)
-#define EEPROM_EN_S BIT(4)
-
-/* PHY EEE Register bitmap of define */
-#define PHY_DEV07 0x07
-#define PHY_DEV07_REG_03C 0x3c
-
-/* PHY Extend Register 0x14 bitmap of define */
-#define PHY_EXT_REG_14 0x14
-
-/* Fields of PHY_EXT_REG_14 */
-#define PHY_EN_DOWN_SHFIT BIT(4)
-
-/* PHY Token Ring Register 0x10 bitmap of define */
-#define PHY_TR_REG_10 0x10
-
-/* PHY Token Ring Register 0x12 bitmap of define */
-#define PHY_TR_REG_12 0x12
-
-/* PHY LPI PCS/DSP Control Register bitmap of define */
-#define PHY_LPI_REG_11 0x11
-
-/* PHY DEV 0x1e Register bitmap of define */
-#define PHY_DEV1E 0x1e
-#define PHY_DEV1E_REG_123 0x123
-#define PHY_DEV1E_REG_A6 0xa6
-
-/* Values of XTAL_FSEL */
-#define XTAL_20MHZ 1
-#define XTAL_40MHZ 2
-#define XTAL_25MHZ 3
-
-#define P6ECR 0x7830
-#define P6_INTF_MODE_TRGMII BIT(0)
-
-#define TRGMII_TXCTRL 0x7a40
-#define TRAIN_TXEN BIT(31)
-#define TXC_INV BIT(30)
-#define TX_DOEO BIT(29)
-#define TX_RST BIT(28)
-
-#define TRGMII_TD0_CTRL 0x7a50
-#define TRGMII_TD1_CTRL 0x7a58
-#define TRGMII_TD2_CTRL 0x7a60
-#define TRGMII_TD3_CTRL 0x7a68
-#define TRGMII_TXCTL_CTRL 0x7a70
-#define TRGMII_TCK_CTRL 0x7a78
-#define TRGMII_TD_CTRL(n) (0x7a50 + (n) * 8)
-#define NUM_TRGMII_CTRL 6
-#define TX_DMPEDRV BIT(31)
-#define TX_DM_SR BIT(15)
-#define TX_DMERODT BIT(14)
-#define TX_DMOECTL BIT(13)
-#define TX_TAP_S 8
-#define TX_TAP_M 0xf00
-#define TX_TRAIN_WD_S 0
-#define TX_TRAIN_WD_M 0xff
-
-#define TRGMII_TD0_ODT 0x7a54
-#define TRGMII_TD1_ODT 0x7a5c
-#define TRGMII_TD2_ODT 0x7a64
-#define TRGMII_TD3_ODT 0x7a6c
-#define TRGMII_TXCTL_ODT 0x7574
-#define TRGMII_TCK_ODT 0x757c
-#define TRGMII_TD_ODT(n) (0x7a54 + (n) * 8)
-#define NUM_TRGMII_ODT 6
-#define TX_DM_DRVN_PRE_S 30
-#define TX_DM_DRVN_PRE_M 0xc0000000
-#define TX_DM_DRVP_PRE_S 28
-#define TX_DM_DRVP_PRE_M 0x30000000
-#define TX_DM_TDSEL_S 24
-#define TX_DM_TDSEL_M 0xf000000
-#define TX_ODTEN BIT(23)
-#define TX_DME_PRE BIT(20)
-#define TX_DM_DRVNT0 BIT(19)
-#define TX_DM_DRVPT0 BIT(18)
-#define TX_DM_DRVNTE BIT(17)
-#define TX_DM_DRVPTE BIT(16)
-#define TX_DM_ODTN_S 12
-#define TX_DM_ODTN_M 0x7000
-#define TX_DM_ODTP_S 8
-#define TX_DM_ODTP_M 0x700
-#define TX_DM_DRVN_S 4
-#define TX_DM_DRVN_M 0xf0
-#define TX_DM_DRVP_S 0
-#define TX_DM_DRVP_M 0x0f
-
-#define P5RGMIIRXCR 0x7b00
-#define CSR_RGMII_RCTL_CFG_S 24
-#define CSR_RGMII_RCTL_CFG_M 0x7000000
-#define CSR_RGMII_RXD_CFG_S 16
-#define CSR_RGMII_RXD_CFG_M 0x70000
-#define CSR_RGMII_EDGE_ALIGN BIT(8)
-#define CSR_RGMII_RXC_90DEG_CFG_S 4
-#define CSR_RGMII_RXC_90DEG_CFG_M 0xf0
-#define CSR_RGMII_RXC_0DEG_CFG_S 0
-#define CSR_RGMII_RXC_0DEG_CFG_M 0x0f
-
-#define P5RGMIITXCR 0x7b04
-#define CSR_RGMII_TXEN_CFG_S 16
-#define CSR_RGMII_TXEN_CFG_M 0x70000
-#define CSR_RGMII_TXD_CFG_S 8
-#define CSR_RGMII_TXD_CFG_M 0x700
-#define CSR_RGMII_TXC_CFG_S 0
-#define CSR_RGMII_TXC_CFG_M 0x1f
-
-#define CHIP_REV 0x7ffc
-#define CHIP_NAME_S 16
-#define CHIP_NAME_M 0xffff0000
-#define CHIP_REV_S 0
-#define CHIP_REV_M 0x0f
-
-/* MMD registers */
-#define CORE_PLL_GROUP2 0x401
-#define RG_SYSPLL_EN_NORMAL BIT(15)
-#define RG_SYSPLL_VODEN BIT(14)
-#define RG_SYSPLL_POSDIV_S 5
-#define RG_SYSPLL_POSDIV_M 0x60
-
-#define CORE_PLL_GROUP4 0x403
-#define RG_SYSPLL_DDSFBK_EN BIT(12)
-#define RG_SYSPLL_BIAS_EN BIT(11)
-#define RG_SYSPLL_BIAS_LPF_EN BIT(10)
-
-#define CORE_PLL_GROUP5 0x404
-#define RG_LCDDS_PCW_NCPO1_S 0
-#define RG_LCDDS_PCW_NCPO1_M 0xffff
-
-#define CORE_PLL_GROUP6 0x405
-#define RG_LCDDS_PCW_NCPO0_S 0
-#define RG_LCDDS_PCW_NCPO0_M 0xffff
-
-#define CORE_PLL_GROUP7 0x406
-#define RG_LCDDS_PWDB BIT(15)
-#define RG_LCDDS_ISO_EN BIT(13)
-#define RG_LCCDS_C_S 4
-#define RG_LCCDS_C_M 0x70
-#define RG_LCDDS_PCW_NCPO_CHG BIT(3)
-
-#define CORE_PLL_GROUP10 0x409
-#define RG_LCDDS_SSC_DELTA_S 0
-#define RG_LCDDS_SSC_DELTA_M 0xfff
-
-#define CORE_PLL_GROUP11 0x40a
-#define RG_LCDDS_SSC_DELTA1_S 0
-#define RG_LCDDS_SSC_DELTA1_M 0xfff
-
-#define CORE_GSWPLL_GCR_1 0x040d
-#define GSWPLL_PREDIV_S 14
-#define GSWPLL_PREDIV_M 0xc000
-#define GSWPLL_POSTDIV_200M_S 12
-#define GSWPLL_POSTDIV_200M_M 0x3000
-#define GSWPLL_EN_PRE BIT(11)
-#define GSWPLL_FBKSEL BIT(10)
-#define GSWPLL_BP BIT(9)
-#define GSWPLL_BR BIT(8)
-#define GSWPLL_FBKDIV_200M_S 0
-#define GSWPLL_FBKDIV_200M_M 0xff
-
-#define CORE_GSWPLL_GCR_2 0x040e
-#define GSWPLL_POSTDIV_500M_S 8
-#define GSWPLL_POSTDIV_500M_M 0x300
-#define GSWPLL_FBKDIV_500M_S 0
-#define GSWPLL_FBKDIV_500M_M 0xff
-
-#define TRGMII_GSW_CLK_CG 0x0410
-#define TRGMIICK_EN BIT(1)
-#define GSWCK_EN BIT(0)
-
-static int mt7530_mii_read(struct gsw_mt753x *gsw, int phy, int reg)
-{
- if (phy < MT753X_NUM_PHYS)
- phy = (gsw->phy_base + phy) & MT753X_SMI_ADDR_MASK;
-
- return mdiobus_read(gsw->host_bus, phy, reg);
-}
-
-static void mt7530_mii_write(struct gsw_mt753x *gsw, int phy, int reg, u16 val)
-{
- if (phy < MT753X_NUM_PHYS)
- phy = (gsw->phy_base + phy) & MT753X_SMI_ADDR_MASK;
-
- mdiobus_write(gsw->host_bus, phy, reg, val);
-}
-
-static int mt7530_mmd_read(struct gsw_mt753x *gsw, int addr, int devad, u16 reg)
-{
- u16 val;
-
- if (addr < MT753X_NUM_PHYS)
- addr = (gsw->phy_base + addr) & MT753X_SMI_ADDR_MASK;
-
- mutex_lock(&gsw->host_bus->mdio_lock);
-
- gsw->host_bus->write(gsw->host_bus, addr, MII_MMD_ACC_CTL_REG,
- (MMD_ADDR << MMD_CMD_S) |
- ((devad << MMD_DEVAD_S) & MMD_DEVAD_M));
-
- gsw->host_bus->write(gsw->host_bus, addr, MII_MMD_ADDR_DATA_REG, reg);
-
- gsw->host_bus->write(gsw->host_bus, addr, MII_MMD_ACC_CTL_REG,
- (MMD_DATA << MMD_CMD_S) |
- ((devad << MMD_DEVAD_S) & MMD_DEVAD_M));
-
- val = gsw->host_bus->read(gsw->host_bus, addr, MII_MMD_ADDR_DATA_REG);
-
- mutex_unlock(&gsw->host_bus->mdio_lock);
-
- return val;
-}
-
-static void mt7530_mmd_write(struct gsw_mt753x *gsw, int addr, int devad,
- u16 reg, u16 val)
-{
- if (addr < MT753X_NUM_PHYS)
- addr = (gsw->phy_base + addr) & MT753X_SMI_ADDR_MASK;
-
- mutex_lock(&gsw->host_bus->mdio_lock);
-
- gsw->host_bus->write(gsw->host_bus, addr, MII_MMD_ACC_CTL_REG,
- (MMD_ADDR << MMD_CMD_S) |
- ((devad << MMD_DEVAD_S) & MMD_DEVAD_M));
-
- gsw->host_bus->write(gsw->host_bus, addr, MII_MMD_ADDR_DATA_REG, reg);
-
- gsw->host_bus->write(gsw->host_bus, addr, MII_MMD_ACC_CTL_REG,
- (MMD_DATA << MMD_CMD_S) |
- ((devad << MMD_DEVAD_S) & MMD_DEVAD_M));
-
- gsw->host_bus->write(gsw->host_bus, addr, MII_MMD_ADDR_DATA_REG, val);
-
- mutex_unlock(&gsw->host_bus->mdio_lock);
-}
-
-static void mt7530_core_reg_write(struct gsw_mt753x *gsw, u32 reg, u32 val)
-{
- gsw->mmd_write(gsw, 0, 0x1f, reg, val);
-}
-
-static void mt7530_trgmii_setting(struct gsw_mt753x *gsw)
-{
- u16 i;
-
- mt7530_core_reg_write(gsw, CORE_PLL_GROUP5, 0x0780);
- mdelay(1);
- mt7530_core_reg_write(gsw, CORE_PLL_GROUP6, 0);
- mt7530_core_reg_write(gsw, CORE_PLL_GROUP10, 0x87);
- mdelay(1);
- mt7530_core_reg_write(gsw, CORE_PLL_GROUP11, 0x87);
-
- /* PLL BIAS enable */
- mt7530_core_reg_write(gsw, CORE_PLL_GROUP4,
- RG_SYSPLL_DDSFBK_EN | RG_SYSPLL_BIAS_EN);
- mdelay(1);
-
- /* PLL LPF enable */
- mt7530_core_reg_write(gsw, CORE_PLL_GROUP4,
- RG_SYSPLL_DDSFBK_EN |
- RG_SYSPLL_BIAS_EN | RG_SYSPLL_BIAS_LPF_EN);
-
- /* sys PLL enable */
- mt7530_core_reg_write(gsw, CORE_PLL_GROUP2,
- RG_SYSPLL_EN_NORMAL | RG_SYSPLL_VODEN |
- (1 << RG_SYSPLL_POSDIV_S));
-
- /* LCDDDS PWDS */
- mt7530_core_reg_write(gsw, CORE_PLL_GROUP7,
- (3 << RG_LCCDS_C_S) |
- RG_LCDDS_PWDB | RG_LCDDS_ISO_EN);
- mdelay(1);
-
- /* Enable MT7530 TRGMII clock */
- mt7530_core_reg_write(gsw, TRGMII_GSW_CLK_CG, GSWCK_EN | TRGMIICK_EN);
-
- /* lower Tx Driving */
- for (i = 0 ; i < NUM_TRGMII_ODT; i++)
- mt753x_reg_write(gsw, TRGMII_TD_ODT(i),
- (4 << TX_DM_DRVP_S) | (4 << TX_DM_DRVN_S));
-}
-
-static void mt7530_rgmii_setting(struct gsw_mt753x *gsw)
-{
- u32 val;
-
- mt7530_core_reg_write(gsw, CORE_PLL_GROUP5, 0x0c80);
- mdelay(1);
- mt7530_core_reg_write(gsw, CORE_PLL_GROUP6, 0);
- mt7530_core_reg_write(gsw, CORE_PLL_GROUP10, 0x87);
- mdelay(1);
- mt7530_core_reg_write(gsw, CORE_PLL_GROUP11, 0x87);
-
- val = mt753x_reg_read(gsw, TRGMII_TXCTRL);
- val &= ~TXC_INV;
- mt753x_reg_write(gsw, TRGMII_TXCTRL, val);
-
- mt753x_reg_write(gsw, TRGMII_TCK_CTRL,
- (8 << TX_TAP_S) | (0x55 << TX_TRAIN_WD_S));
-}
-
-static int mt7530_mac_port_setup(struct gsw_mt753x *gsw)
-{
- u32 hwstrap, p6ecr = 0, p5mcr, p6mcr, phyad;
-
- hwstrap = mt753x_reg_read(gsw, MHWSTRAP);
- hwstrap &= ~(P6_INTF_DIS | P5_INTF_MODE_RGMII | P5_INTF_DIS_S);
- hwstrap |= P5_INTF_SEL_GMAC5;
- if (!gsw->port5_cfg.enabled) {
- p5mcr = FORCE_MODE;
- hwstrap |= P5_INTF_DIS_S;
- } else {
- p5mcr = (IPG_96BIT_WITH_SHORT_IPG << IPG_CFG_S) |
- MAC_MODE | MAC_TX_EN | MAC_RX_EN |
- BKOFF_EN | BACKPR_EN;
-
- if (gsw->port5_cfg.force_link) {
- p5mcr |= FORCE_MODE | FORCE_LINK | FORCE_RX_FC |
- FORCE_TX_FC;
- p5mcr |= gsw->port5_cfg.speed << FORCE_SPD_S;
-
- if (gsw->port5_cfg.duplex)
- p5mcr |= FORCE_DPX;
- }
-
- switch (gsw->port5_cfg.phy_mode) {
- case PHY_INTERFACE_MODE_MII:
- case PHY_INTERFACE_MODE_GMII:
- break;
- case PHY_INTERFACE_MODE_RGMII:
- hwstrap |= P5_INTF_MODE_RGMII;
- break;
- default:
- dev_info(gsw->dev, "%s is not supported by port5\n",
- phy_modes(gsw->port5_cfg.phy_mode));
- p5mcr = FORCE_MODE;
- hwstrap |= P5_INTF_DIS_S;
- }
-
- /* Port5 to PHY direct mode */
- if (of_property_read_u32(gsw->port5_cfg.np, "phy-address",
- &phyad))
- goto parse_p6;
-
- if (phyad != 0 && phyad != 4) {
- dev_info(gsw->dev,
- "Only PHY 0/4 can be connected to Port 5\n");
- goto parse_p6;
- }
-
- hwstrap &= ~P5_INTF_SEL_GMAC5;
- if (phyad == 0)
- hwstrap |= P5_PHY0_SEL;
- else
- hwstrap &= ~P5_PHY0_SEL;
- }
-
-parse_p6:
- if (!gsw->port6_cfg.enabled) {
- p6mcr = FORCE_MODE;
- hwstrap |= P6_INTF_DIS;
- } else {
- p6mcr = (IPG_96BIT_WITH_SHORT_IPG << IPG_CFG_S) |
- MAC_MODE | MAC_TX_EN | MAC_RX_EN |
- BKOFF_EN | BACKPR_EN;
-
- if (gsw->port6_cfg.force_link) {
- p6mcr |= FORCE_MODE | FORCE_LINK | FORCE_RX_FC |
- FORCE_TX_FC;
- p6mcr |= gsw->port6_cfg.speed << FORCE_SPD_S;
-
- if (gsw->port6_cfg.duplex)
- p6mcr |= FORCE_DPX;
- }
-
- switch (gsw->port6_cfg.phy_mode) {
- case PHY_INTERFACE_MODE_RGMII:
- p6ecr = BIT(1);
- break;
- case PHY_INTERFACE_MODE_TRGMII:
- /* set MT7530 central align */
- p6ecr = BIT(0);
- break;
- default:
- dev_info(gsw->dev, "%s is not supported by port6\n",
- phy_modes(gsw->port6_cfg.phy_mode));
- p6mcr = FORCE_MODE;
- hwstrap |= P6_INTF_DIS;
- }
- }
-
- mt753x_reg_write(gsw, MHWSTRAP, hwstrap);
- mt753x_reg_write(gsw, P6ECR, p6ecr);
-
- mt753x_reg_write(gsw, PMCR(5), p5mcr);
- mt753x_reg_write(gsw, PMCR(6), p6mcr);
-
- return 0;
-}
-
-static void mt7530_core_pll_setup(struct gsw_mt753x *gsw)
-{
- u32 hwstrap;
-
- hwstrap = mt753x_reg_read(gsw, HWSTRAP);
-
- switch ((hwstrap & XTAL_FSEL_M) >> XTAL_FSEL_S) {
- case XTAL_40MHZ:
- /* Disable MT7530 core clock */
- mt7530_core_reg_write(gsw, TRGMII_GSW_CLK_CG, 0);
-
- /* disable MT7530 PLL */
- mt7530_core_reg_write(gsw, CORE_GSWPLL_GCR_1,
- (2 << GSWPLL_POSTDIV_200M_S) |
- (32 << GSWPLL_FBKDIV_200M_S));
-
- /* For MT7530 core clock = 500Mhz */
- mt7530_core_reg_write(gsw, CORE_GSWPLL_GCR_2,
- (1 << GSWPLL_POSTDIV_500M_S) |
- (25 << GSWPLL_FBKDIV_500M_S));
-
- /* Enable MT7530 PLL */
- mt7530_core_reg_write(gsw, CORE_GSWPLL_GCR_1,
- (2 << GSWPLL_POSTDIV_200M_S) |
- (32 << GSWPLL_FBKDIV_200M_S) |
- GSWPLL_EN_PRE);
-
- usleep_range(20, 40);
-
- /* Enable MT7530 core clock */
- mt7530_core_reg_write(gsw, TRGMII_GSW_CLK_CG, GSWCK_EN);
- break;
- default:
- /* TODO: PLL settings for 20/25MHz */
- break;
- }
-
- hwstrap = mt753x_reg_read(gsw, HWSTRAP);
- hwstrap |= CHG_TRAP;
- if (gsw->direct_phy_access)
- hwstrap &= ~C_MDIO_BPS_S;
- else
- hwstrap |= C_MDIO_BPS_S;
-
- mt753x_reg_write(gsw, MHWSTRAP, hwstrap);
-
- if (gsw->port6_cfg.enabled &&
- gsw->port6_cfg.phy_mode == PHY_INTERFACE_MODE_TRGMII) {
- mt7530_trgmii_setting(gsw);
- } else {
- /* RGMII */
- mt7530_rgmii_setting(gsw);
- }
-
- /* delay setting for 10/1000M */
- mt753x_reg_write(gsw, P5RGMIIRXCR,
- CSR_RGMII_EDGE_ALIGN |
- (2 << CSR_RGMII_RXC_0DEG_CFG_S));
- mt753x_reg_write(gsw, P5RGMIITXCR, 0x14 << CSR_RGMII_TXC_CFG_S);
-}
-
-static int mt7530_sw_detect(struct gsw_mt753x *gsw, struct chip_rev *crev)
-{
- u32 rev;
-
- rev = mt753x_reg_read(gsw, CHIP_REV);
-
- if (((rev & CHIP_NAME_M) >> CHIP_NAME_S) == MT7530) {
- if (crev) {
- crev->rev = rev & CHIP_REV_M;
- crev->name = "MT7530";
- }
-
- return 0;
- }
-
- return -ENODEV;
-}
-
-static void mt7530_phy_setting(struct gsw_mt753x *gsw)
-{
- int i;
- u32 val;
-
- for (i = 0; i < MT753X_NUM_PHYS; i++) {
- /* Disable EEE */
- gsw->mmd_write(gsw, i, PHY_DEV07, PHY_DEV07_REG_03C, 0);
-
- /* Enable HW auto downshift */
- gsw->mii_write(gsw, i, 0x1f, 0x1);
- val = gsw->mii_read(gsw, i, PHY_EXT_REG_14);
- val |= PHY_EN_DOWN_SHFIT;
- gsw->mii_write(gsw, i, PHY_EXT_REG_14, val);
-
- /* Increase SlvDPSready time */
- gsw->mii_write(gsw, i, 0x1f, 0x52b5);
- gsw->mii_write(gsw, i, PHY_TR_REG_10, 0xafae);
- gsw->mii_write(gsw, i, PHY_TR_REG_12, 0x2f);
- gsw->mii_write(gsw, i, PHY_TR_REG_10, 0x8fae);
-
- /* Increase post_update_timer */
- gsw->mii_write(gsw, i, 0x1f, 0x3);
- gsw->mii_write(gsw, i, PHY_LPI_REG_11, 0x4b);
- gsw->mii_write(gsw, i, 0x1f, 0);
-
- /* Adjust 100_mse_threshold */
- gsw->mmd_write(gsw, i, PHY_DEV1E, PHY_DEV1E_REG_123, 0xffff);
-
- /* Disable mcc */
- gsw->mmd_write(gsw, i, PHY_DEV1E, PHY_DEV1E_REG_A6, 0x300);
- }
-}
-
-static inline bool get_phy_access_mode(const struct device_node *np)
-{
- return of_property_read_bool(np, "mt7530,direct-phy-access");
-}
-
-static int mt7530_sw_init(struct gsw_mt753x *gsw)
-{
- int i;
- u32 val;
-
- gsw->direct_phy_access = get_phy_access_mode(gsw->dev->of_node);
-
- /* Force MT7530 to use (in)direct PHY access */
- val = mt753x_reg_read(gsw, HWSTRAP);
- val |= CHG_TRAP;
- if (gsw->direct_phy_access)
- val &= ~C_MDIO_BPS_S;
- else
- val |= C_MDIO_BPS_S;
- mt753x_reg_write(gsw, MHWSTRAP, val);
-
- /* Read PHY address base from HWSTRAP */
- gsw->phy_base = (((val & SMI_ADDR_M) >> SMI_ADDR_S) << 3) + 8;
- gsw->phy_base &= MT753X_SMI_ADDR_MASK;
-
- if (gsw->direct_phy_access) {
- gsw->mii_read = mt7530_mii_read;
- gsw->mii_write = mt7530_mii_write;
- gsw->mmd_read = mt7530_mmd_read;
- gsw->mmd_write = mt7530_mmd_write;
- } else {
- gsw->mii_read = mt753x_mii_read;
- gsw->mii_write = mt753x_mii_write;
- gsw->mmd_read = mt753x_mmd_ind_read;
- gsw->mmd_write = mt753x_mmd_ind_write;
- }
-
- for (i = 0; i < MT753X_NUM_PHYS; i++) {
- val = gsw->mii_read(gsw, i, MII_BMCR);
- val |= BMCR_PDOWN;
- gsw->mii_write(gsw, i, MII_BMCR, val);
- }
-
- /* Force MAC link down before reset */
- mt753x_reg_write(gsw, PMCR(5), FORCE_MODE);
- mt753x_reg_write(gsw, PMCR(6), FORCE_MODE);
-
- /* Switch soft reset */
- /* BUG: sw reset causes gsw int flooding */
- mt753x_reg_write(gsw, SYS_CTRL, SW_PHY_RST | SW_SYS_RST | SW_REG_RST);
- usleep_range(10, 20);
-
- /* global mac control settings configuration */
- mt753x_reg_write(gsw, GMACCR,
- LATE_COL_DROP | (15 << MTCC_LMT_S) |
- (2 << MAX_RX_JUMBO_S) | RX_PKT_LEN_MAX_JUMBO);
-
- mt7530_core_pll_setup(gsw);
- mt7530_mac_port_setup(gsw);
-
- return 0;
-}
-
-static int mt7530_sw_post_init(struct gsw_mt753x *gsw)
-{
- int i;
- u32 val;
-
- mt7530_phy_setting(gsw);
-
- for (i = 0; i < MT753X_NUM_PHYS; i++) {
- val = gsw->mii_read(gsw, i, MII_BMCR);
- val &= ~BMCR_PDOWN;
- gsw->mii_write(gsw, i, MII_BMCR, val);
- }
-
- return 0;
-}
-
-struct mt753x_sw_id mt7530_id = {
- .model = MT7530,
- .detect = mt7530_sw_detect,
- .init = mt7530_sw_init,
- .post_init = mt7530_sw_post_init
-};
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (c) 2018 MediaTek Inc.
- */
-
-#ifndef _MT7530_H_
-#define _MT7530_H_
-
-#include "mt753x.h"
-
-extern struct mt753x_sw_id mt7530_id;
-
-#endif /* _MT7530_H_ */
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2018 MediaTek Inc.
- * Author: Zhanguo Ju <zhanguo.ju@mediatek.com>
- */
-
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/hrtimer.h>
-
-#include "mt753x.h"
-#include "mt753x_regs.h"
-
-/* MT7531 registers */
-#define SGMII_REG_BASE 0x5000
-#define SGMII_REG_PORT_BASE 0x1000
-#define SGMII_REG(p, r) (SGMII_REG_BASE + \
- (p) * SGMII_REG_PORT_BASE + (r))
-#define PCS_CONTROL_1(p) SGMII_REG(p, 0x00)
-#define SGMII_MODE(p) SGMII_REG(p, 0x20)
-#define QPHY_PWR_STATE_CTRL(p) SGMII_REG(p, 0xe8)
-#define PHYA_CTRL_SIGNAL3(p) SGMII_REG(p, 0x128)
-
-/* Fields of PCS_CONTROL_1 */
-#define SGMII_LINK_STATUS BIT(18)
-#define SGMII_AN_ENABLE BIT(12)
-#define SGMII_AN_RESTART BIT(9)
-
-/* Fields of SGMII_MODE */
-#define SGMII_REMOTE_FAULT_DIS BIT(8)
-#define SGMII_IF_MODE_FORCE_DUPLEX BIT(4)
-#define SGMII_IF_MODE_FORCE_SPEED_S 0x2
-#define SGMII_IF_MODE_FORCE_SPEED_M 0x0c
-#define SGMII_IF_MODE_ADVERT_AN BIT(1)
-
-/* Values of SGMII_IF_MODE_FORCE_SPEED */
-#define SGMII_IF_MODE_FORCE_SPEED_10 0
-#define SGMII_IF_MODE_FORCE_SPEED_100 1
-#define SGMII_IF_MODE_FORCE_SPEED_1000 2
-
-/* Fields of QPHY_PWR_STATE_CTRL */
-#define PHYA_PWD BIT(4)
-
-/* Fields of PHYA_CTRL_SIGNAL3 */
-#define RG_TPHY_SPEED_S 2
-#define RG_TPHY_SPEED_M 0x0c
-
-/* Values of RG_TPHY_SPEED */
-#define RG_TPHY_SPEED_1000 0
-#define RG_TPHY_SPEED_2500 1
-
-/* Unique fields of (M)HWSTRAP for MT7531 */
-#define XTAL_FSEL_S 7
-#define XTAL_FSEL_M BIT(7)
-#define PHY_EN BIT(6)
-#define CHG_STRAP BIT(8)
-
-/* Efuse Register Define */
-#define GBE_EFUSE 0x7bc8
-#define GBE_SEL_EFUSE_EN BIT(0)
-
-/* PHY ENABLE Register bitmap define */
-#define PHY_DEV1F 0x1f
-#define PHY_DEV1F_REG_44 0x44
-#define PHY_DEV1F_REG_104 0x104
-#define PHY_DEV1F_REG_10A 0x10a
-#define PHY_DEV1F_REG_10B 0x10b
-#define PHY_DEV1F_REG_10C 0x10c
-#define PHY_DEV1F_REG_10D 0x10d
-#define PHY_DEV1F_REG_268 0x268
-#define PHY_DEV1F_REG_269 0x269
-#define PHY_DEV1F_REG_403 0x403
-
-/* Fields of PHY_DEV1F_REG_403 */
-#define GBE_EFUSE_SETTING BIT(3)
-#define PHY_EN_BYPASS_MODE BIT(4)
-#define POWER_ON_OFF BIT(5)
-#define PHY_PLL_M GENMASK(9, 8)
-#define PHY_PLL_SEL(x) (((x) << 8) & GENMASK(9, 8))
-
-/* PHY EEE Register bitmap of define */
-#define PHY_DEV07 0x07
-#define PHY_DEV07_REG_03C 0x3c
-
-/* PHY Extend Register 0x14 bitmap of define */
-#define PHY_EXT_REG_14 0x14
-
-/* Fields of PHY_EXT_REG_14 */
-#define PHY_EN_DOWN_SHFIT BIT(4)
-
-/* PHY Extend Register 0x17 bitmap of define */
-#define PHY_EXT_REG_17 0x17
-
-/* Fields of PHY_EXT_REG_17 */
-#define PHY_LINKDOWN_POWER_SAVING_EN BIT(4)
-
-/* PHY Token Ring Register 0x10 bitmap of define */
-#define PHY_TR_REG_10 0x10
-
-/* PHY Token Ring Register 0x12 bitmap of define */
-#define PHY_TR_REG_12 0x12
-
-/* PHY DEV 0x1e Register bitmap of define */
-#define PHY_DEV1E 0x1e
-#define PHY_DEV1E_REG_13 0x13
-#define PHY_DEV1E_REG_14 0x14
-#define PHY_DEV1E_REG_41 0x41
-#define PHY_DEV1E_REG_A6 0xa6
-#define PHY_DEV1E_REG_0C6 0x0c6
-#define PHY_DEV1E_REG_0FE 0x0fe
-#define PHY_DEV1E_REG_123 0x123
-#define PHY_DEV1E_REG_189 0x189
-
-/* Fields of PHY_DEV1E_REG_0C6 */
-#define PHY_POWER_SAVING_S 8
-#define PHY_POWER_SAVING_M 0x300
-#define PHY_POWER_SAVING_TX 0x0
-
-/* Fields of PHY_DEV1E_REG_189 */
-#define DESCRAMBLER_CLEAR_EN 0x1
-
-/* Values of XTAL_FSEL_S */
-#define XTAL_40MHZ 0
-#define XTAL_25MHZ 1
-
-#define PLLGP_EN 0x7820
-#define EN_COREPLL BIT(2)
-#define SW_CLKSW BIT(1)
-#define SW_PLLGP BIT(0)
-
-#define PLLGP_CR0 0x78a8
-#define RG_COREPLL_EN BIT(22)
-#define RG_COREPLL_POSDIV_S 23
-#define RG_COREPLL_POSDIV_M 0x3800000
-#define RG_COREPLL_SDM_PCW_S 1
-#define RG_COREPLL_SDM_PCW_M 0x3ffffe
-#define RG_COREPLL_SDM_PCW_CHG BIT(0)
-
-/* TOP Signals Status Register */
-#define TOP_SIG_SR 0x780c
-#define PAD_DUAL_SGMII_EN BIT(1)
-
-/* RGMII and SGMII PLL clock */
-#define ANA_PLLGP_CR2 0x78b0
-#define ANA_PLLGP_CR5 0x78bc
-
-/* GPIO mode define */
-#define GPIO_MODE_REGS(x) (0x7c0c + (((x) / 8) * 4))
-#define GPIO_MODE_S 4
-
-/* GPIO GROUP IOLB SMT0 Control */
-#define SMT0_IOLB 0x7f04
-#define SMT_IOLB_5_SMI_MDC_EN BIT(5)
-
-/* Unique fields of PMCR for MT7531 */
-#define FORCE_MODE_EEE1G BIT(25)
-#define FORCE_MODE_EEE100 BIT(26)
-#define FORCE_MODE_TX_FC BIT(27)
-#define FORCE_MODE_RX_FC BIT(28)
-#define FORCE_MODE_DPX BIT(29)
-#define FORCE_MODE_SPD BIT(30)
-#define FORCE_MODE_LNK BIT(31)
-#define FORCE_MODE BIT(15)
-
-#define CHIP_REV 0x781C
-#define CHIP_NAME_S 16
-#define CHIP_NAME_M 0xffff0000
-#define CHIP_REV_S 0
-#define CHIP_REV_M 0x0f
-#define CHIP_REV_E1 0x0
-
-#define CLKGEN_CTRL 0x7500
-#define CLK_SKEW_OUT_S 8
-#define CLK_SKEW_OUT_M 0x300
-#define CLK_SKEW_IN_S 6
-#define CLK_SKEW_IN_M 0xc0
-#define RXCLK_NO_DELAY BIT(5)
-#define TXCLK_NO_REVERSE BIT(4)
-#define GP_MODE_S 1
-#define GP_MODE_M 0x06
-#define GP_CLK_EN BIT(0)
-
-/* Values of GP_MODE */
-#define GP_MODE_RGMII 0
-#define GP_MODE_MII 1
-#define GP_MODE_REV_MII 2
-
-/* Values of CLK_SKEW_IN */
-#define CLK_SKEW_IN_NO_CHANGE 0
-#define CLK_SKEW_IN_DELAY_100PPS 1
-#define CLK_SKEW_IN_DELAY_200PPS 2
-#define CLK_SKEW_IN_REVERSE 3
-
-/* Values of CLK_SKEW_OUT */
-#define CLK_SKEW_OUT_NO_CHANGE 0
-#define CLK_SKEW_OUT_DELAY_100PPS 1
-#define CLK_SKEW_OUT_DELAY_200PPS 2
-#define CLK_SKEW_OUT_REVERSE 3
-
-/* Proprietory Control Register of Internal Phy device 0x1e */
-#define RXADC_CONTROL_3 0xc2
-#define RXADC_LDO_CONTROL_2 0xd3
-
-/* Proprietory Control Register of Internal Phy device 0x1f */
-#define TXVLD_DA_271 0x271
-#define TXVLD_DA_272 0x272
-#define TXVLD_DA_273 0x273
-
-/* DSP Channel and NOD_ADDR*/
-#define DSP_CH 0x2
-#define DSP_NOD_ADDR 0xD
-
-/* gpio pinmux pins and functions define */
-static int gpio_int_pins[] = {0};
-static int gpio_int_funcs[] = {1};
-static int gpio_mdc_pins[] = {11, 20};
-static int gpio_mdc_funcs[] = {2, 2};
-static int gpio_mdio_pins[] = {12, 21};
-static int gpio_mdio_funcs[] = {2, 2};
-
-static int mt7531_set_port_sgmii_force_mode(struct gsw_mt753x *gsw, u32 port,
- struct mt753x_port_cfg *port_cfg)
-{
- u32 speed, port_base, val;
- ktime_t timeout;
- u32 timeout_us;
-
- if (port < 5 || port >= MT753X_NUM_PORTS) {
- dev_info(gsw->dev, "port %d is not a SGMII port\n", port);
- return -EINVAL;
- }
-
- port_base = port - 5;
-
- switch (port_cfg->speed) {
- case MAC_SPD_1000:
- speed = RG_TPHY_SPEED_1000;
- break;
- case MAC_SPD_2500:
- speed = RG_TPHY_SPEED_2500;
- break;
- default:
- dev_info(gsw->dev, "invalid SGMII speed idx %d for port %d\n",
- port_cfg->speed, port);
-
- speed = RG_TPHY_SPEED_1000;
- }
-
- /* Step 1: Speed select register setting */
- val = mt753x_reg_read(gsw, PHYA_CTRL_SIGNAL3(port_base));
- val &= ~RG_TPHY_SPEED_M;
- val |= speed << RG_TPHY_SPEED_S;
- mt753x_reg_write(gsw, PHYA_CTRL_SIGNAL3(port_base), val);
-
- /* Step 2 : Disable AN */
- val = mt753x_reg_read(gsw, PCS_CONTROL_1(port_base));
- val &= ~SGMII_AN_ENABLE;
- mt753x_reg_write(gsw, PCS_CONTROL_1(port_base), val);
-
- /* Step 3: SGMII force mode setting */
- val = mt753x_reg_read(gsw, SGMII_MODE(port_base));
- val &= ~SGMII_IF_MODE_ADVERT_AN;
- val &= ~SGMII_IF_MODE_FORCE_SPEED_M;
- val |= SGMII_IF_MODE_FORCE_SPEED_1000 << SGMII_IF_MODE_FORCE_SPEED_S;
- val |= SGMII_IF_MODE_FORCE_DUPLEX;
- /* For sgmii force mode, 0 is full duplex and 1 is half duplex */
- if (port_cfg->duplex)
- val &= ~SGMII_IF_MODE_FORCE_DUPLEX;
-
- mt753x_reg_write(gsw, SGMII_MODE(port_base), val);
-
- /* Step 4: XXX: Disable Link partner's AN and set force mode */
-
- /* Step 5: XXX: Special setting for PHYA ==> reserved for flexible */
-
- /* Step 6 : Release PHYA power down state */
- val = mt753x_reg_read(gsw, QPHY_PWR_STATE_CTRL(port_base));
- val &= ~PHYA_PWD;
- mt753x_reg_write(gsw, QPHY_PWR_STATE_CTRL(port_base), val);
-
- /* Step 7 : Polling SGMII_LINK_STATUS */
- timeout_us = 2000000;
- timeout = ktime_add_us(ktime_get(), timeout_us);
- while (1) {
- val = mt753x_reg_read(gsw, PCS_CONTROL_1(port_base));
- val &= SGMII_LINK_STATUS;
-
- if (val)
- break;
-
- if (ktime_compare(ktime_get(), timeout) > 0)
- return -ETIMEDOUT;
- }
-
- return 0;
-}
-
-static int mt7531_set_port_sgmii_an_mode(struct gsw_mt753x *gsw, u32 port,
- struct mt753x_port_cfg *port_cfg)
-{
- u32 speed, port_base, val;
- ktime_t timeout;
- u32 timeout_us;
-
- if (port < 5 || port >= MT753X_NUM_PORTS) {
- dev_info(gsw->dev, "port %d is not a SGMII port\n", port);
- return -EINVAL;
- }
-
- port_base = port - 5;
-
- switch (port_cfg->speed) {
- case MAC_SPD_1000:
- speed = RG_TPHY_SPEED_1000;
- break;
- case MAC_SPD_2500:
- speed = RG_TPHY_SPEED_2500;
- break;
- default:
- dev_info(gsw->dev, "invalid SGMII speed idx %d for port %d\n",
- port_cfg->speed, port);
-
- speed = RG_TPHY_SPEED_1000;
- }
-
- /* Step 1: Speed select register setting */
- val = mt753x_reg_read(gsw, PHYA_CTRL_SIGNAL3(port_base));
- val &= ~RG_TPHY_SPEED_M;
- val |= speed << RG_TPHY_SPEED_S;
- mt753x_reg_write(gsw, PHYA_CTRL_SIGNAL3(port_base), val);
-
- /* Step 2: Remote fault disable */
- val = mt753x_reg_read(gsw, SGMII_MODE(port));
- val |= SGMII_REMOTE_FAULT_DIS;
- mt753x_reg_write(gsw, SGMII_MODE(port), val);
-
- /* Step 3: Setting Link partner's AN enable = 1 */
-
- /* Step 4: Setting Link partner's device ability for speed/duplex */
-
- /* Step 5: AN re-start */
- val = mt753x_reg_read(gsw, PCS_CONTROL_1(port));
- val |= SGMII_AN_RESTART;
- mt753x_reg_write(gsw, PCS_CONTROL_1(port), val);
-
- /* Step 6: Special setting for PHYA ==> reserved for flexible */
-
- /* Step 7 : Polling SGMII_LINK_STATUS */
- timeout_us = 2000000;
- timeout = ktime_add_us(ktime_get(), timeout_us);
- while (1) {
- val = mt753x_reg_read(gsw, PCS_CONTROL_1(port_base));
- val &= SGMII_LINK_STATUS;
-
- if (val)
- break;
-
- if (ktime_compare(ktime_get(), timeout) > 0)
- return -ETIMEDOUT;
- }
-
- return 0;
-}
-
-static int mt7531_set_port_rgmii(struct gsw_mt753x *gsw, u32 port)
-{
- u32 val;
-
- if (port != 5) {
- dev_info(gsw->dev, "RGMII mode is not available for port %d\n",
- port);
- return -EINVAL;
- }
-
- val = mt753x_reg_read(gsw, CLKGEN_CTRL);
- val |= GP_CLK_EN;
- val &= ~GP_MODE_M;
- val |= GP_MODE_RGMII << GP_MODE_S;
- val |= TXCLK_NO_REVERSE;
- val |= RXCLK_NO_DELAY;
- val &= ~CLK_SKEW_IN_M;
- val |= CLK_SKEW_IN_NO_CHANGE << CLK_SKEW_IN_S;
- val &= ~CLK_SKEW_OUT_M;
- val |= CLK_SKEW_OUT_NO_CHANGE << CLK_SKEW_OUT_S;
- mt753x_reg_write(gsw, CLKGEN_CTRL, val);
-
- return 0;
-}
-
-static int mt7531_mac_port_setup(struct gsw_mt753x *gsw, u32 port,
- struct mt753x_port_cfg *port_cfg)
-{
- u32 pmcr;
- u32 speed;
-
- if (port < 5 || port >= MT753X_NUM_PORTS) {
- dev_info(gsw->dev, "port %d is not a MAC port\n", port);
- return -EINVAL;
- }
-
- if (port_cfg->enabled) {
- pmcr = (IPG_96BIT_WITH_SHORT_IPG << IPG_CFG_S) |
- MAC_MODE | MAC_TX_EN | MAC_RX_EN |
- BKOFF_EN | BACKPR_EN;
-
- if (port_cfg->force_link) {
- /* PMCR's speed field 0x11 is reserved,
- * sw should set 0x10
- */
- speed = port_cfg->speed;
- if (port_cfg->speed == MAC_SPD_2500)
- speed = MAC_SPD_1000;
-
- pmcr |= FORCE_MODE_LNK | FORCE_LINK |
- FORCE_MODE_SPD | FORCE_MODE_DPX |
- FORCE_MODE_RX_FC | FORCE_MODE_TX_FC |
- FORCE_RX_FC | FORCE_TX_FC |
- (speed << FORCE_SPD_S);
-
- if (port_cfg->duplex)
- pmcr |= FORCE_DPX;
- }
- } else {
- pmcr = FORCE_MODE_LNK;
- }
-
- switch (port_cfg->phy_mode) {
- case PHY_INTERFACE_MODE_RGMII:
- mt7531_set_port_rgmii(gsw, port);
- break;
- case PHY_INTERFACE_MODE_SGMII:
- if (port_cfg->force_link)
- mt7531_set_port_sgmii_force_mode(gsw, port, port_cfg);
- else
- mt7531_set_port_sgmii_an_mode(gsw, port, port_cfg);
- break;
- default:
- if (port_cfg->enabled)
- dev_info(gsw->dev, "%s is not supported by port %d\n",
- phy_modes(port_cfg->phy_mode), port);
-
- pmcr = FORCE_MODE_LNK;
- }
-
- mt753x_reg_write(gsw, PMCR(port), pmcr);
-
- return 0;
-}
-
-static void mt7531_core_pll_setup(struct gsw_mt753x *gsw)
-{
- u32 hwstrap;
- u32 val;
-
- val = mt753x_reg_read(gsw, TOP_SIG_SR);
- if (val & PAD_DUAL_SGMII_EN)
- return;
-
- hwstrap = mt753x_reg_read(gsw, HWSTRAP);
-
- switch ((hwstrap & XTAL_FSEL_M) >> XTAL_FSEL_S) {
- case XTAL_25MHZ:
- /* Step 1 : Disable MT7531 COREPLL */
- val = mt753x_reg_read(gsw, PLLGP_EN);
- val &= ~EN_COREPLL;
- mt753x_reg_write(gsw, PLLGP_EN, val);
-
- /* Step 2: switch to XTAL output */
- val = mt753x_reg_read(gsw, PLLGP_EN);
- val |= SW_CLKSW;
- mt753x_reg_write(gsw, PLLGP_EN, val);
-
- val = mt753x_reg_read(gsw, PLLGP_CR0);
- val &= ~RG_COREPLL_EN;
- mt753x_reg_write(gsw, PLLGP_CR0, val);
-
- /* Step 3: disable PLLGP and enable program PLLGP */
- val = mt753x_reg_read(gsw, PLLGP_EN);
- val |= SW_PLLGP;
- mt753x_reg_write(gsw, PLLGP_EN, val);
-
- /* Step 4: program COREPLL output frequency to 500MHz */
- val = mt753x_reg_read(gsw, PLLGP_CR0);
- val &= ~RG_COREPLL_POSDIV_M;
- val |= 2 << RG_COREPLL_POSDIV_S;
- mt753x_reg_write(gsw, PLLGP_CR0, val);
- usleep_range(25, 35);
-
- val = mt753x_reg_read(gsw, PLLGP_CR0);
- val &= ~RG_COREPLL_SDM_PCW_M;
- val |= 0x140000 << RG_COREPLL_SDM_PCW_S;
- mt753x_reg_write(gsw, PLLGP_CR0, val);
-
- /* Set feedback divide ratio update signal to high */
- val = mt753x_reg_read(gsw, PLLGP_CR0);
- val |= RG_COREPLL_SDM_PCW_CHG;
- mt753x_reg_write(gsw, PLLGP_CR0, val);
- /* Wait for at least 16 XTAL clocks */
- usleep_range(10, 20);
-
- /* Step 5: set feedback divide ratio update signal to low */
- val = mt753x_reg_read(gsw, PLLGP_CR0);
- val &= ~RG_COREPLL_SDM_PCW_CHG;
- mt753x_reg_write(gsw, PLLGP_CR0, val);
-
- /* Enable 325M clock for SGMII */
- mt753x_reg_write(gsw, ANA_PLLGP_CR5, 0xad0000);
-
- /* Enable 250SSC clock for RGMII */
- mt753x_reg_write(gsw, ANA_PLLGP_CR2, 0x4f40000);
-
- /* Step 6: Enable MT7531 PLL */
- val = mt753x_reg_read(gsw, PLLGP_CR0);
- val |= RG_COREPLL_EN;
- mt753x_reg_write(gsw, PLLGP_CR0, val);
-
- val = mt753x_reg_read(gsw, PLLGP_EN);
- val |= EN_COREPLL;
- mt753x_reg_write(gsw, PLLGP_EN, val);
- usleep_range(25, 35);
-
- break;
- case XTAL_40MHZ:
- /* Step 1 : Disable MT7531 COREPLL */
- val = mt753x_reg_read(gsw, PLLGP_EN);
- val &= ~EN_COREPLL;
- mt753x_reg_write(gsw, PLLGP_EN, val);
-
- /* Step 2: switch to XTAL output */
- val = mt753x_reg_read(gsw, PLLGP_EN);
- val |= SW_CLKSW;
- mt753x_reg_write(gsw, PLLGP_EN, val);
-
- val = mt753x_reg_read(gsw, PLLGP_CR0);
- val &= ~RG_COREPLL_EN;
- mt753x_reg_write(gsw, PLLGP_CR0, val);
-
- /* Step 3: disable PLLGP and enable program PLLGP */
- val = mt753x_reg_read(gsw, PLLGP_EN);
- val |= SW_PLLGP;
- mt753x_reg_write(gsw, PLLGP_EN, val);
-
- /* Step 4: program COREPLL output frequency to 500MHz */
- val = mt753x_reg_read(gsw, PLLGP_CR0);
- val &= ~RG_COREPLL_POSDIV_M;
- val |= 2 << RG_COREPLL_POSDIV_S;
- mt753x_reg_write(gsw, PLLGP_CR0, val);
- usleep_range(25, 35);
-
- val = mt753x_reg_read(gsw, PLLGP_CR0);
- val &= ~RG_COREPLL_SDM_PCW_M;
- val |= 0x190000 << RG_COREPLL_SDM_PCW_S;
- mt753x_reg_write(gsw, PLLGP_CR0, val);
-
- /* Set feedback divide ratio update signal to high */
- val = mt753x_reg_read(gsw, PLLGP_CR0);
- val |= RG_COREPLL_SDM_PCW_CHG;
- mt753x_reg_write(gsw, PLLGP_CR0, val);
- /* Wait for at least 16 XTAL clocks */
- usleep_range(10, 20);
-
- /* Step 5: set feedback divide ratio update signal to low */
- val = mt753x_reg_read(gsw, PLLGP_CR0);
- val &= ~RG_COREPLL_SDM_PCW_CHG;
- mt753x_reg_write(gsw, PLLGP_CR0, val);
-
- /* Enable 325M clock for SGMII */
- mt753x_reg_write(gsw, ANA_PLLGP_CR5, 0xad0000);
-
- /* Enable 250SSC clock for RGMII */
- mt753x_reg_write(gsw, ANA_PLLGP_CR2, 0x4f40000);
-
- /* Step 6: Enable MT7531 PLL */
- val = mt753x_reg_read(gsw, PLLGP_CR0);
- val |= RG_COREPLL_EN;
- mt753x_reg_write(gsw, PLLGP_CR0, val);
-
- val = mt753x_reg_read(gsw, PLLGP_EN);
- val |= EN_COREPLL;
- mt753x_reg_write(gsw, PLLGP_EN, val);
- usleep_range(25, 35);
- break;
- }
-}
-
-static int mt7531_internal_phy_calibration(struct gsw_mt753x *gsw)
-{
- return 0;
-}
-
-static int mt7531_sw_detect(struct gsw_mt753x *gsw, struct chip_rev *crev)
-{
- u32 rev, topsig;
-
- rev = mt753x_reg_read(gsw, CHIP_REV);
-
- if (((rev & CHIP_NAME_M) >> CHIP_NAME_S) == MT7531) {
- if (crev) {
- topsig = mt753x_reg_read(gsw, TOP_SIG_SR);
-
- crev->rev = rev & CHIP_REV_M;
- crev->name = topsig & PAD_DUAL_SGMII_EN ?
- "MT7531AE" : "MT7531BE";
- }
-
- return 0;
- }
-
- return -ENODEV;
-}
-
-static void pinmux_set_mux_7531(struct gsw_mt753x *gsw, u32 pin, u32 mode)
-{
- u32 val;
-
- val = mt753x_reg_read(gsw, GPIO_MODE_REGS(pin));
- val &= ~(0xf << (pin & 7) * GPIO_MODE_S);
- val |= mode << (pin & 7) * GPIO_MODE_S;
- mt753x_reg_write(gsw, GPIO_MODE_REGS(pin), val);
-}
-
-static int mt7531_set_gpio_pinmux(struct gsw_mt753x *gsw)
-{
- u32 group = 0;
- struct device_node *np = gsw->dev->of_node;
-
- /* Set GPIO 0 interrupt mode */
- pinmux_set_mux_7531(gsw, gpio_int_pins[0], gpio_int_funcs[0]);
-
- of_property_read_u32(np, "mediatek,mdio_master_pinmux", &group);
-
- /* group = 0: do nothing, 1: 1st group (AE), 2: 2nd group (BE) */
- if (group > 0 && group <= 2) {
- group--;
- pinmux_set_mux_7531(gsw, gpio_mdc_pins[group],
- gpio_mdc_funcs[group]);
- pinmux_set_mux_7531(gsw, gpio_mdio_pins[group],
- gpio_mdio_funcs[group]);
- }
-
- return 0;
-}
-
-static void mt7531_phy_pll_setup(struct gsw_mt753x *gsw)
-{
- u32 hwstrap;
- u32 val;
-
- hwstrap = mt753x_reg_read(gsw, HWSTRAP);
-
- switch ((hwstrap & XTAL_FSEL_M) >> XTAL_FSEL_S) {
- case XTAL_25MHZ:
- /* disable pll auto calibration */
- gsw->mmd_write(gsw, 0, PHY_DEV1F, PHY_DEV1F_REG_104, 0x608);
-
- /* change pll sel */
- val = gsw->mmd_read(gsw, 0, PHY_DEV1F,
- PHY_DEV1F_REG_403);
- val &= ~(PHY_PLL_M);
- val |= PHY_PLL_SEL(3);
- gsw->mmd_write(gsw, 0, PHY_DEV1F, PHY_DEV1F_REG_403, val);
-
- /* set divider ratio */
- gsw->mmd_write(gsw, 0, PHY_DEV1F,
- PHY_DEV1F_REG_10A, 0x1009);
-
- /* set divider ratio */
- gsw->mmd_write(gsw, 0, PHY_DEV1F, PHY_DEV1F_REG_10B, 0x7c6);
-
- /* capacitance and resistance adjustment */
- gsw->mmd_write(gsw, 0, PHY_DEV1F,
- PHY_DEV1F_REG_10C, 0xa8be);
-
- break;
- case XTAL_40MHZ:
- /* disable pll auto calibration */
- gsw->mmd_write(gsw, 0, PHY_DEV1F, PHY_DEV1F_REG_104, 0x608);
-
- /* change pll sel */
- val = gsw->mmd_read(gsw, 0, PHY_DEV1F,
- PHY_DEV1F_REG_403);
- val &= ~(PHY_PLL_M);
- val |= PHY_PLL_SEL(3);
- gsw->mmd_write(gsw, 0, PHY_DEV1F, PHY_DEV1F_REG_403, val);
-
- /* set divider ratio */
- gsw->mmd_write(gsw, 0, PHY_DEV1F,
- PHY_DEV1F_REG_10A, 0x1018);
-
- /* set divider ratio */
- gsw->mmd_write(gsw, 0, PHY_DEV1F, PHY_DEV1F_REG_10B, 0xc676);
-
- /* capacitance and resistance adjustment */
- gsw->mmd_write(gsw, 0, PHY_DEV1F,
- PHY_DEV1F_REG_10C, 0xd8be);
- break;
- }
-
- /* power down pll. additional delay is not required via mdio access */
- gsw->mmd_write(gsw, 0, PHY_DEV1F, PHY_DEV1F_REG_10D, 0x10);
-
- /* power up pll */
- gsw->mmd_write(gsw, 0, PHY_DEV1F, PHY_DEV1F_REG_10D, 0x14);
-}
-
-static void mt7531_phy_setting(struct gsw_mt753x *gsw)
-{
- int i;
- u32 val;
-
- /* Adjust DAC TX Delay */
- gsw->mmd_write(gsw, 0, PHY_DEV1F, PHY_DEV1F_REG_44, 0xc0);
-
- for (i = 0; i < MT753X_NUM_PHYS; i++) {
- /* Disable EEE */
- gsw->mmd_write(gsw, i, PHY_DEV07, PHY_DEV07_REG_03C, 0);
-
- /* Enable HW auto downshift */
- gsw->mii_write(gsw, i, 0x1f, 0x1);
- val = gsw->mii_read(gsw, i, PHY_EXT_REG_14);
- val |= PHY_EN_DOWN_SHFIT;
- gsw->mii_write(gsw, i, PHY_EXT_REG_14, val);
-
- /* Increase SlvDPSready time */
- gsw->mii_write(gsw, i, 0x1f, 0x52b5);
- gsw->mii_write(gsw, i, PHY_TR_REG_10, 0xafae);
- gsw->mii_write(gsw, i, PHY_TR_REG_12, 0x2f);
- gsw->mii_write(gsw, i, PHY_TR_REG_10, 0x8fae);
- gsw->mii_write(gsw, i, 0x1f, 0);
-
- /* Adjust 100_mse_threshold */
- gsw->mmd_write(gsw, i, PHY_DEV1E, PHY_DEV1E_REG_123, 0xffff);
-
- /* Disable mcc */
- gsw->mmd_write(gsw, i, PHY_DEV1E, PHY_DEV1E_REG_A6, 0x300);
-
- /* PHY link down power saving enable */
- val = gsw->mii_read(gsw, i, PHY_EXT_REG_17);
- val |= PHY_LINKDOWN_POWER_SAVING_EN;
- gsw->mii_write(gsw, i, PHY_EXT_REG_17, val);
-
- val = gsw->mmd_read(gsw, i, PHY_DEV1E, PHY_DEV1E_REG_0C6);
- val &= ~PHY_POWER_SAVING_M;
- val |= PHY_POWER_SAVING_TX << PHY_POWER_SAVING_S;
- gsw->mmd_write(gsw, i, PHY_DEV1E, PHY_DEV1E_REG_0C6, val);
-
- /* Set TX Pair delay selection */
- gsw->mmd_write(gsw, i, PHY_DEV1E, PHY_DEV1E_REG_13, 0x404);
- gsw->mmd_write(gsw, i, PHY_DEV1E, PHY_DEV1E_REG_14, 0x404);
- }
-}
-
-static void mt7531_adjust_line_driving(struct gsw_mt753x *gsw, u32 port)
-{
- /* For ADC timing margin window for LDO calibration */
- gsw->mmd_write(gsw, port, PHY_DEV1E, RXADC_LDO_CONTROL_2, 0x2222);
-
- /* Adjust AD sample timing */
- gsw->mmd_write(gsw, port, PHY_DEV1E, RXADC_CONTROL_3, 0x4444);
-
- /* Adjust Line driver current for different mode */
- gsw->mmd_write(gsw, port, PHY_DEV1F, TXVLD_DA_271, 0x2ca5);
-
- /* Adjust Line driver current for different mode */
- gsw->mmd_write(gsw, port, PHY_DEV1F, TXVLD_DA_272, 0xc6b);
-
- /* Adjust Line driver amplitude for 10BT */
- gsw->mmd_write(gsw, port, PHY_DEV1F, TXVLD_DA_273, 0x3000);
-
- /* Adjust RX Echo path filter */
- gsw->mmd_write(gsw, port, PHY_DEV1E, PHY_DEV1E_REG_0FE, 0x2);
-
- /* Adjust RX HVGA bias current */
- gsw->mmd_write(gsw, port, PHY_DEV1E, PHY_DEV1E_REG_41, 0x3333);
-
- /* Adjust TX class AB driver 1 */
- gsw->mmd_write(gsw, port, PHY_DEV1F, PHY_DEV1F_REG_268, 0x388);
-
- /* Adjust TX class AB driver 2 */
- gsw->mmd_write(gsw, port, PHY_DEV1F, PHY_DEV1F_REG_269, 0x4448);
-}
-
-static void mt7531_eee_setting(struct gsw_mt753x *gsw, u32 port)
-{
- u32 tr_reg_control;
- u32 val;
-
- /* Disable generate signal to clear the scramble_lock when lpi mode */
- val = gsw->mmd_read(gsw, port, PHY_DEV1E, PHY_DEV1E_REG_189);
- val &= ~DESCRAMBLER_CLEAR_EN;
- gsw->mmd_write(gsw, port, PHY_DEV1E, PHY_DEV1E_REG_189, val);
-
- /* roll back CR*/
- gsw->mii_write(gsw, port, 0x1f, 0x52b5);
- gsw->mmd_write(gsw, port, 0x1e, 0x2d1, 0);
- tr_reg_control = (1 << 15) | (0 << 13) | (DSP_CH << 11) |
- (DSP_NOD_ADDR << 7) | (0x8 << 1);
- gsw->mii_write(gsw, port, 17, 0x1b);
- gsw->mii_write(gsw, port, 18, 0);
- gsw->mii_write(gsw, port, 16, tr_reg_control);
- tr_reg_control = (1 << 15) | (0 << 13) | (DSP_CH << 11) |
- (DSP_NOD_ADDR << 7) | (0xf << 1);
- gsw->mii_write(gsw, port, 17, 0);
- gsw->mii_write(gsw, port, 18, 0);
- gsw->mii_write(gsw, port, 16, tr_reg_control);
-
- tr_reg_control = (1 << 15) | (0 << 13) | (DSP_CH << 11) |
- (DSP_NOD_ADDR << 7) | (0x10 << 1);
- gsw->mii_write(gsw, port, 17, 0x500);
- gsw->mii_write(gsw, port, 18, 0);
- gsw->mii_write(gsw, port, 16, tr_reg_control);
- gsw->mii_write(gsw, port, 0x1f, 0);
-}
-
-static int mt7531_sw_init(struct gsw_mt753x *gsw)
-{
- int i;
- u32 val;
-
- gsw->phy_base = (gsw->smi_addr + 1) & MT753X_SMI_ADDR_MASK;
-
- gsw->mii_read = mt753x_mii_read;
- gsw->mii_write = mt753x_mii_write;
- gsw->mmd_read = mt753x_mmd_read;
- gsw->mmd_write = mt753x_mmd_write;
-
- for (i = 0; i < MT753X_NUM_PHYS; i++) {
- val = gsw->mii_read(gsw, i, MII_BMCR);
- val |= BMCR_ISOLATE;
- gsw->mii_write(gsw, i, MII_BMCR, val);
- }
-
- /* Force MAC link down before reset */
- mt753x_reg_write(gsw, PMCR(5), FORCE_MODE_LNK);
- mt753x_reg_write(gsw, PMCR(6), FORCE_MODE_LNK);
-
- /* Switch soft reset */
- mt753x_reg_write(gsw, SYS_CTRL, SW_SYS_RST | SW_REG_RST);
- usleep_range(10, 20);
-
- /* Enable MDC input Schmitt Trigger */
- val = mt753x_reg_read(gsw, SMT0_IOLB);
- mt753x_reg_write(gsw, SMT0_IOLB, val | SMT_IOLB_5_SMI_MDC_EN);
-
- /* Set 7531 gpio pinmux */
- mt7531_set_gpio_pinmux(gsw);
-
- /* Global mac control settings */
- mt753x_reg_write(gsw, GMACCR,
- (15 << MTCC_LMT_S) | (11 << MAX_RX_JUMBO_S) |
- RX_PKT_LEN_MAX_JUMBO);
-
- mt7531_core_pll_setup(gsw);
- mt7531_mac_port_setup(gsw, 5, &gsw->port5_cfg);
- mt7531_mac_port_setup(gsw, 6, &gsw->port6_cfg);
-
- return 0;
-}
-
-static int mt7531_sw_post_init(struct gsw_mt753x *gsw)
-{
- int i;
- u32 val;
-
- mt7531_phy_pll_setup(gsw);
-
- /* Internal PHYs are disabled by default. SW should enable them.
- * Note that this may already be enabled in bootloader stage.
- */
- val = gsw->mmd_read(gsw, 0, PHY_DEV1F, PHY_DEV1F_REG_403);
- val |= PHY_EN_BYPASS_MODE;
- val &= ~POWER_ON_OFF;
- gsw->mmd_write(gsw, 0, PHY_DEV1F, PHY_DEV1F_REG_403, val);
-
- mt7531_phy_setting(gsw);
-
- for (i = 0; i < MT753X_NUM_PHYS; i++) {
- val = gsw->mii_read(gsw, i, MII_BMCR);
- val &= ~BMCR_ISOLATE;
- gsw->mii_write(gsw, i, MII_BMCR, val);
- }
-
- for (i = 0; i < MT753X_NUM_PHYS; i++)
- mt7531_adjust_line_driving(gsw, i);
-
- for (i = 0; i < MT753X_NUM_PHYS; i++)
- mt7531_eee_setting(gsw, i);
-
- val = mt753x_reg_read(gsw, CHIP_REV);
- val &= CHIP_REV_M;
- if (val == CHIP_REV_E1) {
- mt7531_internal_phy_calibration(gsw);
- } else {
- val = mt753x_reg_read(gsw, GBE_EFUSE);
- if (val & GBE_SEL_EFUSE_EN) {
- val = gsw->mmd_read(gsw, 0, PHY_DEV1F,
- PHY_DEV1F_REG_403);
- val &= ~GBE_EFUSE_SETTING;
- gsw->mmd_write(gsw, 0, PHY_DEV1F, PHY_DEV1F_REG_403,
- val);
- } else {
- mt7531_internal_phy_calibration(gsw);
- }
- }
-
- return 0;
-}
-
-struct mt753x_sw_id mt7531_id = {
- .model = MT7531,
- .detect = mt7531_sw_detect,
- .init = mt7531_sw_init,
- .post_init = mt7531_sw_post_init
-};
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Zhanguo Ju <zhanguo.ju@mediatek.com>");
-MODULE_DESCRIPTION("Driver for MediaTek MT753x Gigabit Switch");
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (c) 2018 MediaTek Inc.
- */
-
-#ifndef _MT7531_H_
-#define _MT7531_H_
-
-#include "mt753x.h"
-
-extern struct mt753x_sw_id mt7531_id;
-
-#endif /* _MT7531_H_ */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (c) 2018 MediaTek Inc.
- * Author: Weijie Gao <weijie.gao@mediatek.com>
- */
-
-#ifndef _MT753X_H_
-#define _MT753X_H_
-
-#include <linux/list.h>
-#include <linux/mutex.h>
-#include <linux/netdevice.h>
-#include <linux/of_mdio.h>
-#include <linux/workqueue.h>
-#include <linux/gpio/consumer.h>
-
-#ifdef CONFIG_SWCONFIG
-#include <linux/switch.h>
-#endif
-
-#include "mt753x_vlan.h"
-
-#define MT753X_DFL_CPU_PORT 6
-#define MT753X_NUM_PHYS 5
-
-#define MT753X_DFL_SMI_ADDR 0x1f
-#define MT753X_SMI_ADDR_MASK 0x1f
-
-struct gsw_mt753x;
-
-enum mt753x_model {
- MT7530 = 0x7530,
- MT7531 = 0x7531
-};
-
-struct mt753x_port_cfg {
- struct device_node *np;
- int phy_mode;
- u32 enabled: 1;
- u32 force_link: 1;
- u32 speed: 2;
- u32 duplex: 1;
-};
-
-struct mt753x_phy {
- struct gsw_mt753x *gsw;
- struct net_device netdev;
- struct phy_device *phydev;
-};
-
-struct gsw_mt753x {
- u32 id;
-
- struct device *dev;
- struct mii_bus *host_bus;
- struct mii_bus *gphy_bus;
- struct mutex mii_lock; /* MII access lock */
- u32 smi_addr;
- u32 phy_base;
- int direct_phy_access;
-
- enum mt753x_model model;
- const char *name;
-
- struct mt753x_port_cfg port5_cfg;
- struct mt753x_port_cfg port6_cfg;
-
- int phy_status_poll;
- struct mt753x_phy phys[MT753X_NUM_PHYS];
-
- int phy_link_sts;
-
- int irq;
- int reset_pin;
- struct work_struct irq_worker;
-
-#ifdef CONFIG_SWCONFIG
- struct switch_dev swdev;
- u32 cpu_port;
-#endif
-
- int global_vlan_enable;
- struct mt753x_vlan_entry vlan_entries[MT753X_NUM_VLANS];
- struct mt753x_port_entry port_entries[MT753X_NUM_PORTS];
-
- int (*mii_read)(struct gsw_mt753x *gsw, int phy, int reg);
- void (*mii_write)(struct gsw_mt753x *gsw, int phy, int reg, u16 val);
-
- int (*mmd_read)(struct gsw_mt753x *gsw, int addr, int devad, u16 reg);
- void (*mmd_write)(struct gsw_mt753x *gsw, int addr, int devad, u16 reg,
- u16 val);
-
- struct list_head list;
-};
-
-struct chip_rev {
- const char *name;
- u32 rev;
-};
-
-struct mt753x_sw_id {
- enum mt753x_model model;
- int (*detect)(struct gsw_mt753x *gsw, struct chip_rev *crev);
- int (*init)(struct gsw_mt753x *gsw);
- int (*post_init)(struct gsw_mt753x *gsw);
-};
-
-extern struct list_head mt753x_devs;
-
-struct gsw_mt753x *mt753x_get_gsw(u32 id);
-struct gsw_mt753x *mt753x_get_first_gsw(void);
-void mt753x_put_gsw(void);
-void mt753x_lock_gsw(void);
-
-u32 mt753x_reg_read(struct gsw_mt753x *gsw, u32 reg);
-void mt753x_reg_write(struct gsw_mt753x *gsw, u32 reg, u32 val);
-
-int mt753x_mii_read(struct gsw_mt753x *gsw, int phy, int reg);
-void mt753x_mii_write(struct gsw_mt753x *gsw, int phy, int reg, u16 val);
-
-int mt753x_mmd_read(struct gsw_mt753x *gsw, int addr, int devad, u16 reg);
-void mt753x_mmd_write(struct gsw_mt753x *gsw, int addr, int devad, u16 reg,
- u16 val);
-
-int mt753x_mmd_ind_read(struct gsw_mt753x *gsw, int addr, int devad, u16 reg);
-void mt753x_mmd_ind_write(struct gsw_mt753x *gsw, int addr, int devad, u16 reg,
- u16 val);
-
-void mt753x_irq_worker(struct work_struct *work);
-void mt753x_irq_enable(struct gsw_mt753x *gsw);
-
-/* MDIO Indirect Access Registers */
-#define MII_MMD_ACC_CTL_REG 0x0d
-#define MMD_CMD_S 14
-#define MMD_CMD_M 0xc000
-#define MMD_DEVAD_S 0
-#define MMD_DEVAD_M 0x1f
-
-/* MMD_CMD: MMD commands */
-#define MMD_ADDR 0
-#define MMD_DATA 1
-
-#define MII_MMD_ADDR_DATA_REG 0x0e
-
-/* Procedure of MT753x Internal Register Access
- *
- * 1. Internal Register Address
- *
- * The MT753x has a 16-bit register address and each register is 32-bit.
- * This means the lowest two bits are not used as the register address is
- * 4-byte aligned.
- *
- * Rest of the valid bits are divided into two parts:
- * Bit 15..6 is the Page address
- * Bit 5..2 is the low address
- *
- * -------------------------------------------------------------------
- * | 15 14 13 12 11 10 9 8 7 6 | 5 4 3 2 | 1 0 |
- * |----------------------------------------|---------------|--------|
- * | Page Address | Address | Unused |
- * -------------------------------------------------------------------
- *
- * 2. MDIO access timing
- *
- * The MT753x uses the following MDIO timing for a single register read
- *
- * Phase 1: Write Page Address
- * -------------------------------------------------------------------
- * | ST | OP | PHY_ADDR | TYPE | RSVD | TA | RSVD | PAGE_ADDR |
- * -------------------------------------------------------------------
- * | 01 | 01 | 11111 | 1 | 1111 | xx | 00000 | REG_ADDR[15..6] |
- * -------------------------------------------------------------------
- *
- * Phase 2: Write low Address & Read low word
- * -------------------------------------------------------------------
- * | ST | OP | PHY_ADDR | TYPE | LOW_ADDR | TA | DATA |
- * -------------------------------------------------------------------
- * | 01 | 10 | 11111 | 0 | REG_ADDR[5..2] | xx | DATA[15..0] |
- * -------------------------------------------------------------------
- *
- * Phase 3: Read high word
- * -------------------------------------------------------------------
- * | ST | OP | PHY_ADDR | TYPE | RSVD | TA | DATA |
- * -------------------------------------------------------------------
- * | 01 | 10 | 11111 | 1 | 0000 | xx | DATA[31..16] |
- * -------------------------------------------------------------------
- *
- * The MT753x uses the following MDIO timing for a single register write
- *
- * Phase 1: Write Page Address (The same as read)
- *
- * Phase 2: Write low Address and low word
- * -------------------------------------------------------------------
- * | ST | OP | PHY_ADDR | TYPE | LOW_ADDR | TA | DATA |
- * -------------------------------------------------------------------
- * | 01 | 01 | 11111 | 0 | REG_ADDR[5..2] | xx | DATA[15..0] |
- * -------------------------------------------------------------------
- *
- * Phase 3: write high word
- * -------------------------------------------------------------------
- * | ST | OP | PHY_ADDR | TYPE | RSVD | TA | DATA |
- * -------------------------------------------------------------------
- * | 01 | 01 | 11111 | 1 | 0000 | xx | DATA[31..16] |
- * -------------------------------------------------------------------
- *
- */
-
-/* Internal Register Address fields */
-#define MT753X_REG_PAGE_ADDR_S 6
-#define MT753X_REG_PAGE_ADDR_M 0xffc0
-#define MT753X_REG_ADDR_S 2
-#define MT753X_REG_ADDR_M 0x3c
-#endif /* _MT753X_H_ */
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2018 MediaTek Inc.
- * Author: Weijie Gao <weijie.gao@mediatek.com>
- */
-
-#include <linux/kernel.h>
-#include <linux/delay.h>
-
-#include "mt753x.h"
-#include "mt753x_regs.h"
-
-void mt753x_irq_enable(struct gsw_mt753x *gsw)
-{
- u32 val;
- int i;
-
- /* Record initial PHY link status */
- for (i = 0; i < MT753X_NUM_PHYS; i++) {
- val = gsw->mii_read(gsw, i, MII_BMSR);
- if (val & BMSR_LSTATUS)
- gsw->phy_link_sts |= BIT(i);
- }
-
- val = BIT(MT753X_NUM_PHYS) - 1;
-
- mt753x_reg_write(gsw, SYS_INT_EN, val);
-}
-
-static void display_port_link_status(struct gsw_mt753x *gsw, u32 port)
-{
- u32 pmsr, speed_bits;
- const char *speed;
-
- pmsr = mt753x_reg_read(gsw, PMSR(port));
-
- speed_bits = (pmsr & MAC_SPD_STS_M) >> MAC_SPD_STS_S;
-
- switch (speed_bits) {
- case MAC_SPD_10:
- speed = "10Mbps";
- break;
- case MAC_SPD_100:
- speed = "100Mbps";
- break;
- case MAC_SPD_1000:
- speed = "1Gbps";
- break;
- case MAC_SPD_2500:
- speed = "2.5Gbps";
- break;
- }
-
- if (pmsr & MAC_LNK_STS) {
- dev_info(gsw->dev, "Port %d Link is Up - %s/%s\n",
- port, speed, (pmsr & MAC_DPX_STS) ? "Full" : "Half");
- } else {
- dev_info(gsw->dev, "Port %d Link is Down\n", port);
- }
-}
-
-void mt753x_irq_worker(struct work_struct *work)
-{
- struct gsw_mt753x *gsw;
- u32 sts, physts, laststs;
- int i;
-
- gsw = container_of(work, struct gsw_mt753x, irq_worker);
-
- sts = mt753x_reg_read(gsw, SYS_INT_STS);
-
- /* Check for changed PHY link status */
- for (i = 0; i < MT753X_NUM_PHYS; i++) {
- if (!(sts & PHY_LC_INT(i)))
- continue;
-
- laststs = gsw->phy_link_sts & BIT(i);
- physts = !!(gsw->mii_read(gsw, i, MII_BMSR) & BMSR_LSTATUS);
- physts <<= i;
-
- if (physts ^ laststs) {
- gsw->phy_link_sts ^= BIT(i);
- display_port_link_status(gsw, i);
- }
- }
-
- mt753x_reg_write(gsw, SYS_INT_STS, sts);
-
- enable_irq(gsw->irq);
-}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2018 MediaTek Inc.
- * Author: Weijie Gao <weijie.gao@mediatek.com>
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/reset.h>
-#include <linux/hrtimer.h>
-#include <linux/mii.h>
-#include <linux/of_mdio.h>
-#include <linux/of_platform.h>
-#include <linux/of_gpio.h>
-#include <linux/of_net.h>
-#include <linux/of_irq.h>
-#include <linux/phy.h>
-
-#include "mt753x.h"
-#include "mt753x_swconfig.h"
-#include "mt753x_regs.h"
-#include "mt753x_nl.h"
-#include "mt7530.h"
-#include "mt7531.h"
-
-static u32 mt753x_id;
-struct list_head mt753x_devs;
-static DEFINE_MUTEX(mt753x_devs_lock);
-
-static struct mt753x_sw_id *mt753x_sw_ids[] = {
- &mt7530_id,
- &mt7531_id,
-};
-
-u32 mt753x_reg_read(struct gsw_mt753x *gsw, u32 reg)
-{
- u32 high, low;
-
- mutex_lock(&gsw->host_bus->mdio_lock);
-
- gsw->host_bus->write(gsw->host_bus, gsw->smi_addr, 0x1f,
- (reg & MT753X_REG_PAGE_ADDR_M) >> MT753X_REG_PAGE_ADDR_S);
-
- low = gsw->host_bus->read(gsw->host_bus, gsw->smi_addr,
- (reg & MT753X_REG_ADDR_M) >> MT753X_REG_ADDR_S);
-
- high = gsw->host_bus->read(gsw->host_bus, gsw->smi_addr, 0x10);
-
- mutex_unlock(&gsw->host_bus->mdio_lock);
-
- return (high << 16) | (low & 0xffff);
-}
-
-void mt753x_reg_write(struct gsw_mt753x *gsw, u32 reg, u32 val)
-{
- mutex_lock(&gsw->host_bus->mdio_lock);
-
- gsw->host_bus->write(gsw->host_bus, gsw->smi_addr, 0x1f,
- (reg & MT753X_REG_PAGE_ADDR_M) >> MT753X_REG_PAGE_ADDR_S);
-
- gsw->host_bus->write(gsw->host_bus, gsw->smi_addr,
- (reg & MT753X_REG_ADDR_M) >> MT753X_REG_ADDR_S, val & 0xffff);
-
- gsw->host_bus->write(gsw->host_bus, gsw->smi_addr, 0x10, val >> 16);
-
- mutex_unlock(&gsw->host_bus->mdio_lock);
-}
-
-/* Indirect MDIO clause 22/45 access */
-static int mt753x_mii_rw(struct gsw_mt753x *gsw, int phy, int reg, u16 data,
- u32 cmd, u32 st)
-{
- ktime_t timeout;
- u32 val, timeout_us;
- int ret = 0;
-
- timeout_us = 100000;
- timeout = ktime_add_us(ktime_get(), timeout_us);
- while (1) {
- val = mt753x_reg_read(gsw, PHY_IAC);
-
- if ((val & PHY_ACS_ST) == 0)
- break;
-
- if (ktime_compare(ktime_get(), timeout) > 0)
- return -ETIMEDOUT;
- }
-
- val = (st << MDIO_ST_S) |
- ((cmd << MDIO_CMD_S) & MDIO_CMD_M) |
- ((phy << MDIO_PHY_ADDR_S) & MDIO_PHY_ADDR_M) |
- ((reg << MDIO_REG_ADDR_S) & MDIO_REG_ADDR_M);
-
- if (cmd == MDIO_CMD_WRITE || cmd == MDIO_CMD_ADDR)
- val |= data & MDIO_RW_DATA_M;
-
- mt753x_reg_write(gsw, PHY_IAC, val | PHY_ACS_ST);
-
- timeout_us = 100000;
- timeout = ktime_add_us(ktime_get(), timeout_us);
- while (1) {
- val = mt753x_reg_read(gsw, PHY_IAC);
-
- if ((val & PHY_ACS_ST) == 0)
- break;
-
- if (ktime_compare(ktime_get(), timeout) > 0)
- return -ETIMEDOUT;
- }
-
- if (cmd == MDIO_CMD_READ || cmd == MDIO_CMD_READ_C45) {
- val = mt753x_reg_read(gsw, PHY_IAC);
- ret = val & MDIO_RW_DATA_M;
- }
-
- return ret;
-}
-
-int mt753x_mii_read(struct gsw_mt753x *gsw, int phy, int reg)
-{
- int val;
-
- if (phy < MT753X_NUM_PHYS)
- phy = (gsw->phy_base + phy) & MT753X_SMI_ADDR_MASK;
-
- mutex_lock(&gsw->mii_lock);
- val = mt753x_mii_rw(gsw, phy, reg, 0, MDIO_CMD_READ, MDIO_ST_C22);
- mutex_unlock(&gsw->mii_lock);
-
- return val;
-}
-
-void mt753x_mii_write(struct gsw_mt753x *gsw, int phy, int reg, u16 val)
-{
- if (phy < MT753X_NUM_PHYS)
- phy = (gsw->phy_base + phy) & MT753X_SMI_ADDR_MASK;
-
- mutex_lock(&gsw->mii_lock);
- mt753x_mii_rw(gsw, phy, reg, val, MDIO_CMD_WRITE, MDIO_ST_C22);
- mutex_unlock(&gsw->mii_lock);
-}
-
-int mt753x_mmd_read(struct gsw_mt753x *gsw, int addr, int devad, u16 reg)
-{
- int val;
-
- if (addr < MT753X_NUM_PHYS)
- addr = (gsw->phy_base + addr) & MT753X_SMI_ADDR_MASK;
-
- mutex_lock(&gsw->mii_lock);
- mt753x_mii_rw(gsw, addr, devad, reg, MDIO_CMD_ADDR, MDIO_ST_C45);
- val = mt753x_mii_rw(gsw, addr, devad, 0, MDIO_CMD_READ_C45,
- MDIO_ST_C45);
- mutex_unlock(&gsw->mii_lock);
-
- return val;
-}
-
-void mt753x_mmd_write(struct gsw_mt753x *gsw, int addr, int devad, u16 reg,
- u16 val)
-{
- if (addr < MT753X_NUM_PHYS)
- addr = (gsw->phy_base + addr) & MT753X_SMI_ADDR_MASK;
-
- mutex_lock(&gsw->mii_lock);
- mt753x_mii_rw(gsw, addr, devad, reg, MDIO_CMD_ADDR, MDIO_ST_C45);
- mt753x_mii_rw(gsw, addr, devad, val, MDIO_CMD_WRITE, MDIO_ST_C45);
- mutex_unlock(&gsw->mii_lock);
-}
-
-int mt753x_mmd_ind_read(struct gsw_mt753x *gsw, int addr, int devad, u16 reg)
-{
- u16 val;
-
- if (addr < MT753X_NUM_PHYS)
- addr = (gsw->phy_base + addr) & MT753X_SMI_ADDR_MASK;
-
- mutex_lock(&gsw->mii_lock);
-
- mt753x_mii_rw(gsw, addr, MII_MMD_ACC_CTL_REG,
- (MMD_ADDR << MMD_CMD_S) |
- ((devad << MMD_DEVAD_S) & MMD_DEVAD_M),
- MDIO_CMD_WRITE, MDIO_ST_C22);
-
- mt753x_mii_rw(gsw, addr, MII_MMD_ADDR_DATA_REG, reg,
- MDIO_CMD_WRITE, MDIO_ST_C22);
-
- mt753x_mii_rw(gsw, addr, MII_MMD_ACC_CTL_REG,
- (MMD_DATA << MMD_CMD_S) |
- ((devad << MMD_DEVAD_S) & MMD_DEVAD_M),
- MDIO_CMD_WRITE, MDIO_ST_C22);
-
- val = mt753x_mii_rw(gsw, addr, MII_MMD_ADDR_DATA_REG, 0,
- MDIO_CMD_READ, MDIO_ST_C22);
-
- mutex_unlock(&gsw->mii_lock);
-
- return val;
-}
-
-void mt753x_mmd_ind_write(struct gsw_mt753x *gsw, int addr, int devad, u16 reg,
- u16 val)
-{
- if (addr < MT753X_NUM_PHYS)
- addr = (gsw->phy_base + addr) & MT753X_SMI_ADDR_MASK;
-
- mutex_lock(&gsw->mii_lock);
-
- mt753x_mii_rw(gsw, addr, MII_MMD_ACC_CTL_REG,
- (MMD_ADDR << MMD_CMD_S) |
- ((devad << MMD_DEVAD_S) & MMD_DEVAD_M),
- MDIO_CMD_WRITE, MDIO_ST_C22);
-
- mt753x_mii_rw(gsw, addr, MII_MMD_ADDR_DATA_REG, reg,
- MDIO_CMD_WRITE, MDIO_ST_C22);
-
- mt753x_mii_rw(gsw, addr, MII_MMD_ACC_CTL_REG,
- (MMD_DATA << MMD_CMD_S) |
- ((devad << MMD_DEVAD_S) & MMD_DEVAD_M),
- MDIO_CMD_WRITE, MDIO_ST_C22);
-
- mt753x_mii_rw(gsw, addr, MII_MMD_ADDR_DATA_REG, val,
- MDIO_CMD_WRITE, MDIO_ST_C22);
-
- mutex_unlock(&gsw->mii_lock);
-}
-
-static inline int mt753x_get_duplex(const struct device_node *np)
-{
- return of_property_read_bool(np, "full-duplex");
-}
-
-static void mt753x_load_port_cfg(struct gsw_mt753x *gsw)
-{
- struct device_node *port_np;
- struct device_node *fixed_link_node;
- struct mt753x_port_cfg *port_cfg;
- u32 port;
-
- for_each_child_of_node(gsw->dev->of_node, port_np) {
- if (!of_device_is_compatible(port_np, "mediatek,mt753x-port"))
- continue;
-
- if (!of_device_is_available(port_np))
- continue;
-
- if (of_property_read_u32(port_np, "reg", &port))
- continue;
-
- switch (port) {
- case 5:
- port_cfg = &gsw->port5_cfg;
- break;
- case 6:
- port_cfg = &gsw->port6_cfg;
- break;
- default:
- continue;
- }
-
- if (port_cfg->enabled) {
- dev_info(gsw->dev, "duplicated node for port%d\n",
- port_cfg->phy_mode);
- continue;
- }
-
- port_cfg->np = port_np;
-
- port_cfg->phy_mode = of_get_phy_mode(port_np);
- if (port_cfg->phy_mode < 0) {
- dev_info(gsw->dev, "incorrect phy-mode %d\n", port);
- continue;
- }
-
- fixed_link_node = of_get_child_by_name(port_np, "fixed-link");
- if (fixed_link_node) {
- u32 speed;
-
- port_cfg->force_link = 1;
- port_cfg->duplex = mt753x_get_duplex(fixed_link_node);
-
- if (of_property_read_u32(fixed_link_node, "speed",
- &speed)) {
- speed = 0;
- continue;
- }
-
- of_node_put(fixed_link_node);
-
- switch (speed) {
- case 10:
- port_cfg->speed = MAC_SPD_10;
- break;
- case 100:
- port_cfg->speed = MAC_SPD_100;
- break;
- case 1000:
- port_cfg->speed = MAC_SPD_1000;
- break;
- case 2500:
- port_cfg->speed = MAC_SPD_2500;
- break;
- default:
- dev_info(gsw->dev, "incorrect speed %d\n",
- speed);
- continue;
- }
- }
-
- port_cfg->enabled = 1;
- }
-}
-
-static void mt753x_add_gsw(struct gsw_mt753x *gsw)
-{
- mutex_lock(&mt753x_devs_lock);
- gsw->id = mt753x_id++;
- INIT_LIST_HEAD(&gsw->list);
- list_add_tail(&gsw->list, &mt753x_devs);
- mutex_unlock(&mt753x_devs_lock);
-}
-
-static void mt753x_remove_gsw(struct gsw_mt753x *gsw)
-{
- mutex_lock(&mt753x_devs_lock);
- list_del(&gsw->list);
- mutex_unlock(&mt753x_devs_lock);
-}
-
-
-struct gsw_mt753x *mt753x_get_gsw(u32 id)
-{
- struct gsw_mt753x *dev;
-
- mutex_lock(&mt753x_devs_lock);
-
- list_for_each_entry(dev, &mt753x_devs, list) {
- if (dev->id == id)
- return dev;
- }
-
- mutex_unlock(&mt753x_devs_lock);
-
- return NULL;
-}
-
-struct gsw_mt753x *mt753x_get_first_gsw(void)
-{
- struct gsw_mt753x *dev;
-
- mutex_lock(&mt753x_devs_lock);
-
- list_for_each_entry(dev, &mt753x_devs, list)
- return dev;
-
- mutex_unlock(&mt753x_devs_lock);
-
- return NULL;
-}
-
-void mt753x_put_gsw(void)
-{
- mutex_unlock(&mt753x_devs_lock);
-}
-
-void mt753x_lock_gsw(void)
-{
- mutex_lock(&mt753x_devs_lock);
-}
-
-static int mt753x_hw_reset(struct gsw_mt753x *gsw)
-{
- struct device_node *np = gsw->dev->of_node;
- struct reset_control *rstc;
- int mcm;
- int ret = -EINVAL;
-
- mcm = of_property_read_bool(np, "mediatek,mcm");
- if (mcm) {
- rstc = devm_reset_control_get(gsw->dev, "mcm");
- ret = IS_ERR(rstc);
- if (IS_ERR(rstc)) {
- dev_err(gsw->dev, "Missing reset ctrl of switch\n");
- return ret;
- }
-
- reset_control_assert(rstc);
- msleep(30);
- reset_control_deassert(rstc);
-
- gsw->reset_pin = -1;
- return 0;
- }
-
- gsw->reset_pin = of_get_named_gpio(np, "reset-gpios", 0);
- if (gsw->reset_pin < 0) {
- dev_err(gsw->dev, "Missing reset pin of switch\n");
- return ret;
- }
-
- ret = devm_gpio_request(gsw->dev, gsw->reset_pin, "mt753x-reset");
- if (ret) {
- dev_info(gsw->dev, "Failed to request gpio %d\n",
- gsw->reset_pin);
- return ret;
- }
-
- gpio_direction_output(gsw->reset_pin, 0);
- msleep(30);
- gpio_set_value(gsw->reset_pin, 1);
- msleep(500);
-
- return 0;
-}
-
-static irqreturn_t mt753x_irq_handler(int irq, void *dev)
-{
- struct gsw_mt753x *gsw = dev;
-
- disable_irq_nosync(gsw->irq);
-
- schedule_work(&gsw->irq_worker);
-
- return IRQ_HANDLED;
-}
-
-static int mt753x_probe(struct platform_device *pdev)
-{
- struct gsw_mt753x *gsw;
- struct mt753x_sw_id *sw;
- struct device_node *np = pdev->dev.of_node;
- struct device_node *mdio;
- struct mii_bus *mdio_bus;
- int ret = -EINVAL;
- struct chip_rev rev;
- struct mt753x_mapping *map;
- int i;
-
- mdio = of_parse_phandle(np, "mediatek,mdio", 0);
- if (!mdio)
- return -EINVAL;
-
- mdio_bus = of_mdio_find_bus(mdio);
- if (!mdio_bus)
- return -EPROBE_DEFER;
-
- gsw = devm_kzalloc(&pdev->dev, sizeof(struct gsw_mt753x), GFP_KERNEL);
- if (!gsw)
- return -ENOMEM;
-
- gsw->host_bus = mdio_bus;
- gsw->dev = &pdev->dev;
- mutex_init(&gsw->mii_lock);
-
- /* Switch hard reset */
- if (mt753x_hw_reset(gsw))
- goto fail;
-
- /* Fetch the SMI address dirst */
- if (of_property_read_u32(np, "mediatek,smi-addr", &gsw->smi_addr))
- gsw->smi_addr = MT753X_DFL_SMI_ADDR;
-
- /* Get LAN/WAN port mapping */
- map = mt753x_find_mapping(np);
- if (map) {
- mt753x_apply_mapping(gsw, map);
- gsw->global_vlan_enable = 1;
- dev_info(gsw->dev, "LAN/WAN VLAN setting=%s\n", map->name);
- }
-
- /* Load MAC port configurations */
- mt753x_load_port_cfg(gsw);
-
- /* Check for valid switch and then initialize */
- for (i = 0; i < ARRAY_SIZE(mt753x_sw_ids); i++) {
- if (!mt753x_sw_ids[i]->detect(gsw, &rev)) {
- sw = mt753x_sw_ids[i];
-
- gsw->name = rev.name;
- gsw->model = sw->model;
-
- dev_info(gsw->dev, "Switch is MediaTek %s rev %d",
- gsw->name, rev.rev);
-
- /* Initialize the switch */
- ret = sw->init(gsw);
- if (ret)
- goto fail;
-
- break;
- }
- }
-
- if (i >= ARRAY_SIZE(mt753x_sw_ids)) {
- dev_err(gsw->dev, "No mt753x switch found\n");
- goto fail;
- }
-
- gsw->irq = platform_get_irq(pdev, 0);
- if (gsw->irq >= 0) {
- ret = devm_request_irq(gsw->dev, gsw->irq, mt753x_irq_handler,
- 0, dev_name(gsw->dev), gsw);
- if (ret) {
- dev_err(gsw->dev, "Failed to request irq %d\n",
- gsw->irq);
- goto fail;
- }
-
- INIT_WORK(&gsw->irq_worker, mt753x_irq_worker);
- }
-
- platform_set_drvdata(pdev, gsw);
-
- gsw->phy_status_poll = of_property_read_bool(gsw->dev->of_node,
- "mediatek,phy-poll");
-
- mt753x_add_gsw(gsw);
-
- mt753x_swconfig_init(gsw);
-
- if (sw->post_init)
- sw->post_init(gsw);
-
- if (gsw->irq >= 0)
- mt753x_irq_enable(gsw);
-
- return 0;
-
-fail:
- devm_kfree(&pdev->dev, gsw);
-
- return ret;
-}
-
-static int mt753x_remove(struct platform_device *pdev)
-{
- struct gsw_mt753x *gsw = platform_get_drvdata(pdev);
-
- if (gsw->irq >= 0)
- cancel_work_sync(&gsw->irq_worker);
-
- if (gsw->reset_pin >= 0)
- devm_gpio_free(&pdev->dev, gsw->reset_pin);
-
-#ifdef CONFIG_SWCONFIG
- mt753x_swconfig_destroy(gsw);
-#endif
-
- mt753x_remove_gsw(gsw);
-
- platform_set_drvdata(pdev, NULL);
-
- return 0;
-}
-
-static const struct of_device_id mt753x_ids[] = {
- { .compatible = "mediatek,mt753x" },
- { },
-};
-
-MODULE_DEVICE_TABLE(of, mt753x_ids);
-
-static struct platform_driver mt753x_driver = {
- .probe = mt753x_probe,
- .remove = mt753x_remove,
- .driver = {
- .name = "mt753x",
- .of_match_table = mt753x_ids,
- },
-};
-
-static int __init mt753x_init(void)
-{
- int ret;
-
- INIT_LIST_HEAD(&mt753x_devs);
- ret = platform_driver_register(&mt753x_driver);
-
- mt753x_nl_init();
-
- return ret;
-}
-module_init(mt753x_init);
-
-static void __exit mt753x_exit(void)
-{
- mt753x_nl_exit();
-
- platform_driver_unregister(&mt753x_driver);
-}
-module_exit(mt753x_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Weijie Gao <weijie.gao@mediatek.com>");
-MODULE_DESCRIPTION("Driver for MediaTek MT753x Gigabit Switch");
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2018 MediaTek Inc.
- * Author: Sirui Zhao <Sirui.Zhao@mediatek.com>
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <net/genetlink.h>
-
-#include "mt753x.h"
-#include "mt753x_nl.h"
-
-struct mt753x_nl_cmd_item {
- enum mt753x_cmd cmd;
- bool require_dev;
- int (*process)(struct genl_info *info, struct gsw_mt753x *gsw);
- u32 nr_required_attrs;
- const enum mt753x_attr *required_attrs;
-};
-
-static int mt753x_nl_response(struct sk_buff *skb, struct genl_info *info);
-
-static const struct nla_policy mt753x_nl_cmd_policy[] = {
- [MT753X_ATTR_TYPE_MESG] = { .type = NLA_STRING },
- [MT753X_ATTR_TYPE_PHY] = { .type = NLA_S32 },
- [MT753X_ATTR_TYPE_REG] = { .type = NLA_S32 },
- [MT753X_ATTR_TYPE_VAL] = { .type = NLA_S32 },
- [MT753X_ATTR_TYPE_DEV_NAME] = { .type = NLA_S32 },
- [MT753X_ATTR_TYPE_DEV_ID] = { .type = NLA_S32 },
- [MT753X_ATTR_TYPE_DEVAD] = { .type = NLA_S32 },
-};
-
-static const struct genl_ops mt753x_nl_ops[] = {
- {
- .cmd = MT753X_CMD_REQUEST,
- .doit = mt753x_nl_response,
- .policy = mt753x_nl_cmd_policy,
- .flags = GENL_ADMIN_PERM,
- }, {
- .cmd = MT753X_CMD_READ,
- .doit = mt753x_nl_response,
- .policy = mt753x_nl_cmd_policy,
- .flags = GENL_ADMIN_PERM,
- }, {
- .cmd = MT753X_CMD_WRITE,
- .doit = mt753x_nl_response,
- .policy = mt753x_nl_cmd_policy,
- .flags = GENL_ADMIN_PERM,
- },
-};
-
-static struct genl_family mt753x_nl_family = {
- .name = MT753X_GENL_NAME,
- .version = MT753X_GENL_VERSION,
- .maxattr = MT753X_NR_ATTR_TYPE,
- .ops = mt753x_nl_ops,
- .n_ops = ARRAY_SIZE(mt753x_nl_ops),
-};
-
-static int mt753x_nl_list_devs(char *buff, int size)
-{
- struct gsw_mt753x *gsw;
- int len, total = 0;
- char buf[80];
-
- memset(buff, 0, size);
-
- mt753x_lock_gsw();
-
- list_for_each_entry(gsw, &mt753x_devs, list) {
- len = snprintf(buf, sizeof(buf),
- "id: %d, model: %s, node: %s\n",
- gsw->id, gsw->name, gsw->dev->of_node->name);
- strncat(buff, buf, size - total);
- total += len;
- }
-
- mt753x_put_gsw();
-
- return total;
-}
-
-static int mt753x_nl_prepare_reply(struct genl_info *info, u8 cmd,
- struct sk_buff **skbp)
-{
- struct sk_buff *msg;
- void *reply;
-
- if (!info)
- return -EINVAL;
-
- msg = genlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
- if (!msg)
- return -ENOMEM;
-
- /* Construct send-back message header */
- reply = genlmsg_put(msg, info->snd_portid, info->snd_seq,
- &mt753x_nl_family, 0, cmd);
- if (!reply) {
- nlmsg_free(msg);
- return -EINVAL;
- }
-
- *skbp = msg;
- return 0;
-}
-
-static int mt753x_nl_send_reply(struct sk_buff *skb, struct genl_info *info)
-{
- struct genlmsghdr *genlhdr = nlmsg_data(nlmsg_hdr(skb));
- void *reply = genlmsg_data(genlhdr);
-
- /* Finalize a generic netlink message (update message header) */
- genlmsg_end(skb, reply);
-
- /* reply to a request */
- return genlmsg_reply(skb, info);
-}
-
-static s32 mt753x_nl_get_s32(struct genl_info *info, enum mt753x_attr attr,
- s32 defval)
-{
- struct nlattr *na;
-
- na = info->attrs[attr];
- if (na)
- return nla_get_s32(na);
-
- return defval;
-}
-
-static int mt753x_nl_get_u32(struct genl_info *info, enum mt753x_attr attr,
- u32 *val)
-{
- struct nlattr *na;
-
- na = info->attrs[attr];
- if (na) {
- *val = nla_get_u32(na);
- return 0;
- }
-
- return -1;
-}
-
-static struct gsw_mt753x *mt753x_nl_parse_find_gsw(struct genl_info *info)
-{
- struct gsw_mt753x *gsw;
- struct nlattr *na;
- int gsw_id;
-
- na = info->attrs[MT753X_ATTR_TYPE_DEV_ID];
- if (na) {
- gsw_id = nla_get_s32(na);
- if (gsw_id >= 0)
- gsw = mt753x_get_gsw(gsw_id);
- else
- gsw = mt753x_get_first_gsw();
- } else {
- gsw = mt753x_get_first_gsw();
- }
-
- return gsw;
-}
-
-static int mt753x_nl_get_swdevs(struct genl_info *info, struct gsw_mt753x *gsw)
-{
- struct sk_buff *rep_skb = NULL;
- char dev_info[512];
- int ret;
-
- ret = mt753x_nl_list_devs(dev_info, sizeof(dev_info));
- if (!ret) {
- pr_info("No switch registered\n");
- return -EINVAL;
- }
-
- ret = mt753x_nl_prepare_reply(info, MT753X_CMD_REPLY, &rep_skb);
- if (ret < 0)
- goto err;
-
- ret = nla_put_string(rep_skb, MT753X_ATTR_TYPE_MESG, dev_info);
- if (ret < 0)
- goto err;
-
- return mt753x_nl_send_reply(rep_skb, info);
-
-err:
- if (rep_skb)
- nlmsg_free(rep_skb);
-
- return ret;
-}
-
-static int mt753x_nl_reply_read(struct genl_info *info, struct gsw_mt753x *gsw)
-{
- struct sk_buff *rep_skb = NULL;
- s32 phy, devad, reg;
- int value;
- int ret = 0;
-
- phy = mt753x_nl_get_s32(info, MT753X_ATTR_TYPE_PHY, -1);
- devad = mt753x_nl_get_s32(info, MT753X_ATTR_TYPE_DEVAD, -1);
- reg = mt753x_nl_get_s32(info, MT753X_ATTR_TYPE_REG, -1);
-
- if (reg < 0)
- goto err;
-
- ret = mt753x_nl_prepare_reply(info, MT753X_CMD_READ, &rep_skb);
- if (ret < 0)
- goto err;
-
- if (phy >= 0) {
- if (devad < 0)
- value = gsw->mii_read(gsw, phy, reg);
- else
- value = gsw->mmd_read(gsw, phy, devad, reg);
- } else {
- value = mt753x_reg_read(gsw, reg);
- }
-
- ret = nla_put_s32(rep_skb, MT753X_ATTR_TYPE_REG, reg);
- if (ret < 0)
- goto err;
-
- ret = nla_put_s32(rep_skb, MT753X_ATTR_TYPE_VAL, value);
- if (ret < 0)
- goto err;
-
- return mt753x_nl_send_reply(rep_skb, info);
-
-err:
- if (rep_skb)
- nlmsg_free(rep_skb);
-
- return ret;
-}
-
-static int mt753x_nl_reply_write(struct genl_info *info, struct gsw_mt753x *gsw)
-{
- struct sk_buff *rep_skb = NULL;
- s32 phy, devad, reg;
- u32 value;
- int ret = 0;
-
- phy = mt753x_nl_get_s32(info, MT753X_ATTR_TYPE_PHY, -1);
- devad = mt753x_nl_get_s32(info, MT753X_ATTR_TYPE_DEVAD, -1);
- reg = mt753x_nl_get_s32(info, MT753X_ATTR_TYPE_REG, -1);
-
- if (mt753x_nl_get_u32(info, MT753X_ATTR_TYPE_VAL, &value))
- goto err;
-
- if (reg < 0)
- goto err;
-
- ret = mt753x_nl_prepare_reply(info, MT753X_CMD_WRITE, &rep_skb);
- if (ret < 0)
- goto err;
-
- if (phy >= 0) {
- if (devad < 0)
- gsw->mii_write(gsw, phy, reg, value);
- else
- gsw->mmd_write(gsw, phy, devad, reg, value);
- } else {
- mt753x_reg_write(gsw, reg, value);
- }
-
- ret = nla_put_s32(rep_skb, MT753X_ATTR_TYPE_REG, reg);
- if (ret < 0)
- goto err;
-
- ret = nla_put_s32(rep_skb, MT753X_ATTR_TYPE_VAL, value);
- if (ret < 0)
- goto err;
-
- return mt753x_nl_send_reply(rep_skb, info);
-
-err:
- if (rep_skb)
- nlmsg_free(rep_skb);
-
- return ret;
-}
-
-static const enum mt753x_attr mt753x_nl_cmd_read_attrs[] = {
- MT753X_ATTR_TYPE_REG
-};
-
-static const enum mt753x_attr mt753x_nl_cmd_write_attrs[] = {
- MT753X_ATTR_TYPE_REG,
- MT753X_ATTR_TYPE_VAL
-};
-
-static const struct mt753x_nl_cmd_item mt753x_nl_cmds[] = {
- {
- .cmd = MT753X_CMD_REQUEST,
- .require_dev = false,
- .process = mt753x_nl_get_swdevs
- }, {
- .cmd = MT753X_CMD_READ,
- .require_dev = true,
- .process = mt753x_nl_reply_read,
- .required_attrs = mt753x_nl_cmd_read_attrs,
- .nr_required_attrs = ARRAY_SIZE(mt753x_nl_cmd_read_attrs),
- }, {
- .cmd = MT753X_CMD_WRITE,
- .require_dev = true,
- .process = mt753x_nl_reply_write,
- .required_attrs = mt753x_nl_cmd_write_attrs,
- .nr_required_attrs = ARRAY_SIZE(mt753x_nl_cmd_write_attrs),
- }
-};
-
-static int mt753x_nl_response(struct sk_buff *skb, struct genl_info *info)
-{
- struct genlmsghdr *hdr = nlmsg_data(info->nlhdr);
- const struct mt753x_nl_cmd_item *cmditem = NULL;
- struct gsw_mt753x *gsw = NULL;
- u32 sat_req_attrs = 0;
- int i, ret;
-
- for (i = 0; i < ARRAY_SIZE(mt753x_nl_cmds); i++) {
- if (hdr->cmd == mt753x_nl_cmds[i].cmd) {
- cmditem = &mt753x_nl_cmds[i];
- break;
- }
- }
-
- if (!cmditem) {
- pr_info("mt753x-nl: unknown cmd %u\n", hdr->cmd);
- return -EINVAL;
- }
-
- for (i = 0; i < cmditem->nr_required_attrs; i++) {
- if (info->attrs[cmditem->required_attrs[i]])
- sat_req_attrs++;
- }
-
- if (sat_req_attrs != cmditem->nr_required_attrs) {
- pr_info("mt753x-nl: missing required attr(s) for cmd %u\n",
- hdr->cmd);
- return -EINVAL;
- }
-
- if (cmditem->require_dev) {
- gsw = mt753x_nl_parse_find_gsw(info);
- if (!gsw) {
- pr_info("mt753x-nl: failed to find switch dev\n");
- return -EINVAL;
- }
- }
-
- ret = cmditem->process(info, gsw);
-
- mt753x_put_gsw();
-
- return ret;
-}
-
-int __init mt753x_nl_init(void)
-{
- int ret;
-
- ret = genl_register_family(&mt753x_nl_family);
- if (ret) {
- pr_info("mt753x-nl: genl_register_family_with_ops failed\n");
- return ret;
- }
-
- return 0;
-}
-
-void __exit mt753x_nl_exit(void)
-{
- genl_unregister_family(&mt753x_nl_family);
-}
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (c) 2018 MediaTek Inc.
- * Author: Sirui Zhao <Sirui.Zhao@mediatek.com>
- */
-
-#ifndef _MT753X_NL_H_
-#define _MT753X_NL_H_
-
-#define MT753X_GENL_NAME "mt753x"
-#define MT753X_GENL_VERSION 0x1
-
-enum mt753x_cmd {
- MT753X_CMD_UNSPEC = 0,
- MT753X_CMD_REQUEST,
- MT753X_CMD_REPLY,
- MT753X_CMD_READ,
- MT753X_CMD_WRITE,
-
- __MT753X_CMD_MAX,
-};
-
-enum mt753x_attr {
- MT753X_ATTR_TYPE_UNSPEC = 0,
- MT753X_ATTR_TYPE_MESG,
- MT753X_ATTR_TYPE_PHY,
- MT753X_ATTR_TYPE_DEVAD,
- MT753X_ATTR_TYPE_REG,
- MT753X_ATTR_TYPE_VAL,
- MT753X_ATTR_TYPE_DEV_NAME,
- MT753X_ATTR_TYPE_DEV_ID,
-
- __MT753X_ATTR_TYPE_MAX,
-};
-
-#define MT753X_NR_ATTR_TYPE (__MT753X_ATTR_TYPE_MAX - 1)
-
-#ifdef __KERNEL__
-int __init mt753x_nl_init(void);
-void __exit mt753x_nl_exit(void);
-#endif /* __KERNEL__ */
-
-#endif /* _MT753X_NL_H_ */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (c) 2018 MediaTek Inc.
- * Author: Weijie Gao <weijie.gao@mediatek.com>
- */
-
-#ifndef _MT753X_REGS_H_
-#define _MT753X_REGS_H_
-
-#include <linux/bitops.h>
-
-/* Values of Egress TAG Control */
-#define ETAG_CTRL_UNTAG 0
-#define ETAG_CTRL_TAG 2
-#define ETAG_CTRL_SWAP 1
-#define ETAG_CTRL_STACK 3
-
-#define VTCR 0x90
-#define VAWD1 0x94
-#define VAWD2 0x98
-
-/* Fields of VTCR */
-#define VTCR_BUSY BIT(31)
-#define IDX_INVLD BIT(16)
-#define VTCR_FUNC_S 12
-#define VTCR_FUNC_M 0xf000
-#define VTCR_VID_S 0
-#define VTCR_VID_M 0xfff
-
-/* Values of VTCR_FUNC */
-#define VTCR_READ_VLAN_ENTRY 0
-#define VTCR_WRITE_VLAN_ENTRY 1
-#define VTCR_INVD_VLAN_ENTRY 2
-#define VTCR_ENABLE_VLAN_ENTRY 3
-#define VTCR_READ_ACL_ENTRY 4
-#define VTCR_WRITE_ACL_ENTRY 5
-#define VTCR_READ_TRTCM_TABLE 6
-#define VTCR_WRITE_TRTCM_TABLE 7
-#define VTCR_READ_ACL_MASK_ENTRY 8
-#define VTCR_WRITE_ACL_MASK_ENTRY 9
-#define VTCR_READ_ACL_RULE_ENTRY 10
-#define VTCR_WRITE_ACL_RULE_ENTRY 11
-#define VTCR_READ_ACL_RATE_ENTRY 12
-#define VTCR_WRITE_ACL_RATE_ENTRY 13
-
-/* VLAN entry fields */
-/* VAWD1 */
-#define PORT_STAG BIT(31)
-#define IVL_MAC BIT(30)
-#define EG_CON BIT(29)
-#define VTAG_EN BIT(28)
-#define COPY_PRI BIT(27)
-#define USER_PRI_S 24
-#define USER_PRI_M 0x7000000
-#define PORT_MEM_S 16
-#define PORT_MEM_M 0xff0000
-#define S_TAG1_S 4
-#define S_TAG1_M 0xfff0
-#define FID_S 1
-#define FID_M 0x0e
-#define VENTRY_VALID BIT(0)
-
-/* VAWD2 */
-#define S_TAG2_S 16
-#define S_TAG2_M 0xffff0000
-#define PORT_ETAG_S(p) ((p) * 2)
-#define PORT_ETAG_M 0x03
-
-#define PORT_CTRL_BASE 0x2000
-#define PORT_CTRL_PORT_OFFSET 0x100
-#define PORT_CTRL_REG(p, r) (PORT_CTRL_BASE + \
- (p) * PORT_CTRL_PORT_OFFSET + (r))
-#define CKGCR(p) PORT_CTRL_REG(p, 0x00)
-#define PCR(p) PORT_CTRL_REG(p, 0x04)
-#define PIC(p) PORT_CTRL_REG(p, 0x08)
-#define PSC(p) PORT_CTRL_REG(p, 0x0c)
-#define PVC(p) PORT_CTRL_REG(p, 0x10)
-#define PPBV1(p) PORT_CTRL_REG(p, 0x14)
-#define PPBV2(p) PORT_CTRL_REG(p, 0x18)
-#define BSR(p) PORT_CTRL_REG(p, 0x1c)
-#define STAG01 PORT_CTRL_REG(p, 0x20)
-#define STAG23 PORT_CTRL_REG(p, 0x24)
-#define STAG45 PORT_CTRL_REG(p, 0x28)
-#define STAG67 PORT_CTRL_REG(p, 0x2c)
-
-#define PPBV(p, g) (PPBV1(p) + ((g) / 2) * 4)
-
-/* Fields of PCR */
-#define MLDV2_EN BIT(30)
-#define EG_TAG_S 28
-#define EG_TAG_M 0x30000000
-#define PORT_PRI_S 24
-#define PORT_PRI_M 0x7000000
-#define PORT_MATRIX_S 16
-#define PORT_MATRIX_M 0xff0000
-#define UP2DSCP_EN BIT(12)
-#define UP2TAG_EN BIT(11)
-#define ACL_EN BIT(10)
-#define PORT_TX_MIR BIT(9)
-#define PORT_RX_MIR BIT(8)
-#define ACL_MIR BIT(7)
-#define MIS_PORT_FW_S 4
-#define MIS_PORT_FW_M 0x70
-#define VLAN_MIS BIT(2)
-#define PORT_VLAN_S 0
-#define PORT_VLAN_M 0x03
-
-/* Values of PORT_VLAN */
-#define PORT_MATRIX_MODE 0
-#define FALLBACK_MODE 1
-#define CHECK_MODE 2
-#define SECURITY_MODE 3
-
-/* Fields of PVC */
-#define STAG_VPID_S 16
-#define STAG_VPID_M 0xffff0000
-#define DIS_PVID BIT(15)
-#define FORCE_PVID BIT(14)
-#define PT_VPM BIT(12)
-#define PT_OPTION BIT(11)
-#define PVC_EG_TAG_S 8
-#define PVC_EG_TAG_M 0x700
-#define VLAN_ATTR_S 6
-#define VLAN_ATTR_M 0xc0
-#define PVC_PORT_STAG BIT(5)
-#define BC_LKYV_EN BIT(4)
-#define MC_LKYV_EN BIT(3)
-#define UC_LKYV_EN BIT(2)
-#define ACC_FRM_S 0
-#define ACC_FRM_M 0x03
-
-/* Values of VLAN_ATTR */
-#define VA_USER_PORT 0
-#define VA_STACK_PORT 1
-#define VA_TRANSLATION_PORT 2
-#define VA_TRANSPARENT_PORT 3
-
-/* Fields of PPBV */
-#define GRP_PORT_PRI_S(g) (((g) % 2) * 16 + 13)
-#define GRP_PORT_PRI_M 0x07
-#define GRP_PORT_VID_S(g) (((g) % 2) * 16)
-#define GRP_PORT_VID_M 0xfff
-
-#define PORT_MAC_CTRL_BASE 0x3000
-#define PORT_MAC_CTRL_PORT_OFFSET 0x100
-#define PORT_MAC_CTRL_REG(p, r) (PORT_MAC_CTRL_BASE + \
- (p) * PORT_MAC_CTRL_PORT_OFFSET + (r))
-#define PMCR(p) PORT_MAC_CTRL_REG(p, 0x00)
-#define PMEEECR(p) PORT_MAC_CTRL_REG(p, 0x04)
-#define PMSR(p) PORT_MAC_CTRL_REG(p, 0x08)
-#define PINT_EN(p) PORT_MAC_CTRL_REG(p, 0x10)
-#define PINT_STS(p) PORT_MAC_CTRL_REG(p, 0x14)
-
-#define GMACCR (PORT_MAC_CTRL_BASE + 0xe0)
-#define TXCRC_EN BIT(19)
-#define RXCRC_EN BIT(18)
-#define PRMBL_LMT_EN BIT(17)
-#define MTCC_LMT_S 9
-#define MTCC_LMT_M 0x1e00
-#define MAX_RX_JUMBO_S 2
-#define MAX_RX_JUMBO_M 0x3c
-#define MAX_RX_PKT_LEN_S 0
-#define MAX_RX_PKT_LEN_M 0x3
-
-/* Values of MAX_RX_PKT_LEN */
-#define RX_PKT_LEN_1518 0
-#define RX_PKT_LEN_1536 1
-#define RX_PKT_LEN_1522 2
-#define RX_PKT_LEN_MAX_JUMBO 3
-
-/* Fields of PMCR */
-#define IPG_CFG_S 18
-#define IPG_CFG_M 0xc0000
-#define EXT_PHY BIT(17)
-#define MAC_MODE BIT(16)
-#define MAC_TX_EN BIT(14)
-#define MAC_RX_EN BIT(13)
-#define MAC_PRE BIT(11)
-#define BKOFF_EN BIT(9)
-#define BACKPR_EN BIT(8)
-#define FORCE_EEE1G BIT(7)
-#define FORCE_EEE1000 BIT(6)
-#define FORCE_RX_FC BIT(5)
-#define FORCE_TX_FC BIT(4)
-#define FORCE_SPD_S 2
-#define FORCE_SPD_M 0x0c
-#define FORCE_DPX BIT(1)
-#define FORCE_LINK BIT(0)
-
-/* Fields of PMSR */
-#define EEE1G_STS BIT(7)
-#define EEE100_STS BIT(6)
-#define RX_FC_STS BIT(5)
-#define TX_FC_STS BIT(4)
-#define MAC_SPD_STS_S 2
-#define MAC_SPD_STS_M 0x0c
-#define MAC_DPX_STS BIT(1)
-#define MAC_LNK_STS BIT(0)
-
-/* Values of MAC_SPD_STS */
-#define MAC_SPD_10 0
-#define MAC_SPD_100 1
-#define MAC_SPD_1000 2
-#define MAC_SPD_2500 3
-
-/* Values of IPG_CFG */
-#define IPG_96BIT 0
-#define IPG_96BIT_WITH_SHORT_IPG 1
-#define IPG_64BIT 2
-
-#define MIB_COUNTER_BASE 0x4000
-#define MIB_COUNTER_PORT_OFFSET 0x100
-#define MIB_COUNTER_REG(p, r) (MIB_COUNTER_BASE + \
- (p) * MIB_COUNTER_PORT_OFFSET + (r))
-#define STATS_TDPC 0x00
-#define STATS_TCRC 0x04
-#define STATS_TUPC 0x08
-#define STATS_TMPC 0x0C
-#define STATS_TBPC 0x10
-#define STATS_TCEC 0x14
-#define STATS_TSCEC 0x18
-#define STATS_TMCEC 0x1C
-#define STATS_TDEC 0x20
-#define STATS_TLCEC 0x24
-#define STATS_TXCEC 0x28
-#define STATS_TPPC 0x2C
-#define STATS_TL64PC 0x30
-#define STATS_TL65PC 0x34
-#define STATS_TL128PC 0x38
-#define STATS_TL256PC 0x3C
-#define STATS_TL512PC 0x40
-#define STATS_TL1024PC 0x44
-#define STATS_TOC 0x48
-#define STATS_RDPC 0x60
-#define STATS_RFPC 0x64
-#define STATS_RUPC 0x68
-#define STATS_RMPC 0x6C
-#define STATS_RBPC 0x70
-#define STATS_RAEPC 0x74
-#define STATS_RCEPC 0x78
-#define STATS_RUSPC 0x7C
-#define STATS_RFEPC 0x80
-#define STATS_ROSPC 0x84
-#define STATS_RJEPC 0x88
-#define STATS_RPPC 0x8C
-#define STATS_RL64PC 0x90
-#define STATS_RL65PC 0x94
-#define STATS_RL128PC 0x98
-#define STATS_RL256PC 0x9C
-#define STATS_RL512PC 0xA0
-#define STATS_RL1024PC 0xA4
-#define STATS_ROC 0xA8
-#define STATS_RDPC_CTRL 0xB0
-#define STATS_RDPC_ING 0xB4
-#define STATS_RDPC_ARL 0xB8
-
-#define SYS_CTRL 0x7000
-#define SW_PHY_RST BIT(2)
-#define SW_SYS_RST BIT(1)
-#define SW_REG_RST BIT(0)
-
-#define SYS_INT_EN 0x7008
-#define SYS_INT_STS 0x700c
-#define MAC_PC_INT BIT(16)
-#define PHY_INT(p) BIT((p) + 8)
-#define PHY_LC_INT(p) BIT(p)
-
-#define PHY_IAC 0x701c
-#define PHY_ACS_ST BIT(31)
-#define MDIO_REG_ADDR_S 25
-#define MDIO_REG_ADDR_M 0x3e000000
-#define MDIO_PHY_ADDR_S 20
-#define MDIO_PHY_ADDR_M 0x1f00000
-#define MDIO_CMD_S 18
-#define MDIO_CMD_M 0xc0000
-#define MDIO_ST_S 16
-#define MDIO_ST_M 0x30000
-#define MDIO_RW_DATA_S 0
-#define MDIO_RW_DATA_M 0xffff
-
-/* MDIO_CMD: MDIO commands */
-#define MDIO_CMD_ADDR 0
-#define MDIO_CMD_WRITE 1
-#define MDIO_CMD_READ 2
-#define MDIO_CMD_READ_C45 3
-
-/* MDIO_ST: MDIO start field */
-#define MDIO_ST_C45 0
-#define MDIO_ST_C22 1
-
-#define HWSTRAP 0x7800
-#define MHWSTRAP 0x7804
-
-#endif /* _MT753X_REGS_H_ */
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2018 MediaTek Inc.
- * Author: Weijie Gao <weijie.gao@mediatek.com>
- */
-
-#include <linux/if.h>
-#include <linux/list.h>
-#include <linux/if_ether.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <linux/netlink.h>
-#include <linux/bitops.h>
-#include <net/genetlink.h>
-#include <linux/delay.h>
-#include <linux/phy.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/lockdep.h>
-#include <linux/workqueue.h>
-#include <linux/of_device.h>
-
-#include "mt753x.h"
-#include "mt753x_swconfig.h"
-#include "mt753x_regs.h"
-
-#define MT753X_PORT_MIB_TXB_ID 18 /* TxByte */
-#define MT753X_PORT_MIB_RXB_ID 37 /* RxByte */
-
-#define MIB_DESC(_s, _o, _n) \
- { \
- .size = (_s), \
- .offset = (_o), \
- .name = (_n), \
- }
-
-struct mt753x_mib_desc {
- unsigned int size;
- unsigned int offset;
- const char *name;
-};
-
-static const struct mt753x_mib_desc mt753x_mibs[] = {
- MIB_DESC(1, STATS_TDPC, "TxDrop"),
- MIB_DESC(1, STATS_TCRC, "TxCRC"),
- MIB_DESC(1, STATS_TUPC, "TxUni"),
- MIB_DESC(1, STATS_TMPC, "TxMulti"),
- MIB_DESC(1, STATS_TBPC, "TxBroad"),
- MIB_DESC(1, STATS_TCEC, "TxCollision"),
- MIB_DESC(1, STATS_TSCEC, "TxSingleCol"),
- MIB_DESC(1, STATS_TMCEC, "TxMultiCol"),
- MIB_DESC(1, STATS_TDEC, "TxDefer"),
- MIB_DESC(1, STATS_TLCEC, "TxLateCol"),
- MIB_DESC(1, STATS_TXCEC, "TxExcCol"),
- MIB_DESC(1, STATS_TPPC, "TxPause"),
- MIB_DESC(1, STATS_TL64PC, "Tx64Byte"),
- MIB_DESC(1, STATS_TL65PC, "Tx65Byte"),
- MIB_DESC(1, STATS_TL128PC, "Tx128Byte"),
- MIB_DESC(1, STATS_TL256PC, "Tx256Byte"),
- MIB_DESC(1, STATS_TL512PC, "Tx512Byte"),
- MIB_DESC(1, STATS_TL1024PC, "Tx1024Byte"),
- MIB_DESC(2, STATS_TOC, "TxByte"),
- MIB_DESC(1, STATS_RDPC, "RxDrop"),
- MIB_DESC(1, STATS_RFPC, "RxFiltered"),
- MIB_DESC(1, STATS_RUPC, "RxUni"),
- MIB_DESC(1, STATS_RMPC, "RxMulti"),
- MIB_DESC(1, STATS_RBPC, "RxBroad"),
- MIB_DESC(1, STATS_RAEPC, "RxAlignErr"),
- MIB_DESC(1, STATS_RCEPC, "RxCRC"),
- MIB_DESC(1, STATS_RUSPC, "RxUnderSize"),
- MIB_DESC(1, STATS_RFEPC, "RxFragment"),
- MIB_DESC(1, STATS_ROSPC, "RxOverSize"),
- MIB_DESC(1, STATS_RJEPC, "RxJabber"),
- MIB_DESC(1, STATS_RPPC, "RxPause"),
- MIB_DESC(1, STATS_RL64PC, "Rx64Byte"),
- MIB_DESC(1, STATS_RL65PC, "Rx65Byte"),
- MIB_DESC(1, STATS_RL128PC, "Rx128Byte"),
- MIB_DESC(1, STATS_RL256PC, "Rx256Byte"),
- MIB_DESC(1, STATS_RL512PC, "Rx512Byte"),
- MIB_DESC(1, STATS_RL1024PC, "Rx1024Byte"),
- MIB_DESC(2, STATS_ROC, "RxByte"),
- MIB_DESC(1, STATS_RDPC_CTRL, "RxCtrlDrop"),
- MIB_DESC(1, STATS_RDPC_ING, "RxIngDrop"),
- MIB_DESC(1, STATS_RDPC_ARL, "RxARLDrop")
-};
-
-enum {
- /* Global attributes. */
- MT753X_ATTR_ENABLE_VLAN,
-};
-
-static int mt753x_get_vlan_enable(struct switch_dev *dev,
- const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct gsw_mt753x *gsw = container_of(dev, struct gsw_mt753x, swdev);
-
- val->value.i = gsw->global_vlan_enable;
-
- return 0;
-}
-
-static int mt753x_set_vlan_enable(struct switch_dev *dev,
- const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct gsw_mt753x *gsw = container_of(dev, struct gsw_mt753x, swdev);
-
- gsw->global_vlan_enable = val->value.i != 0;
-
- return 0;
-}
-
-static int mt753x_get_port_pvid(struct switch_dev *dev, int port, int *val)
-{
- struct gsw_mt753x *gsw = container_of(dev, struct gsw_mt753x, swdev);
-
- if (port >= MT753X_NUM_PORTS)
- return -EINVAL;
-
- *val = mt753x_reg_read(gsw, PPBV1(port));
- *val &= GRP_PORT_VID_M;
-
- return 0;
-}
-
-static int mt753x_set_port_pvid(struct switch_dev *dev, int port, int pvid)
-{
- struct gsw_mt753x *gsw = container_of(dev, struct gsw_mt753x, swdev);
-
- if (port >= MT753X_NUM_PORTS)
- return -EINVAL;
-
- if (pvid < MT753X_MIN_VID || pvid > MT753X_MAX_VID)
- return -EINVAL;
-
- gsw->port_entries[port].pvid = pvid;
-
- return 0;
-}
-
-static int mt753x_get_vlan_ports(struct switch_dev *dev, struct switch_val *val)
-{
- struct gsw_mt753x *gsw = container_of(dev, struct gsw_mt753x, swdev);
- u32 member;
- u32 etags;
- int i;
-
- val->len = 0;
-
- if (val->port_vlan < 0 || val->port_vlan >= MT753X_NUM_VLANS)
- return -EINVAL;
-
- mt753x_vlan_ctrl(gsw, VTCR_READ_VLAN_ENTRY, val->port_vlan);
-
- member = mt753x_reg_read(gsw, VAWD1);
- member &= PORT_MEM_M;
- member >>= PORT_MEM_S;
-
- etags = mt753x_reg_read(gsw, VAWD2);
-
- for (i = 0; i < MT753X_NUM_PORTS; i++) {
- struct switch_port *p;
- int etag;
-
- if (!(member & BIT(i)))
- continue;
-
- p = &val->value.ports[val->len++];
- p->id = i;
-
- etag = (etags >> PORT_ETAG_S(i)) & PORT_ETAG_M;
-
- if (etag == ETAG_CTRL_TAG)
- p->flags |= BIT(SWITCH_PORT_FLAG_TAGGED);
- else if (etag != ETAG_CTRL_UNTAG)
- dev_info(gsw->dev,
- "vlan egress tag control neither untag nor tag.\n");
- }
-
- return 0;
-}
-
-static int mt753x_set_vlan_ports(struct switch_dev *dev, struct switch_val *val)
-{
- struct gsw_mt753x *gsw = container_of(dev, struct gsw_mt753x, swdev);
- u8 member = 0;
- u8 etags = 0;
- int i;
-
- if (val->port_vlan < 0 || val->port_vlan >= MT753X_NUM_VLANS ||
- val->len > MT753X_NUM_PORTS)
- return -EINVAL;
-
- for (i = 0; i < val->len; i++) {
- struct switch_port *p = &val->value.ports[i];
-
- if (p->id >= MT753X_NUM_PORTS)
- return -EINVAL;
-
- member |= BIT(p->id);
-
- if (p->flags & BIT(SWITCH_PORT_FLAG_TAGGED))
- etags |= BIT(p->id);
- }
-
- gsw->vlan_entries[val->port_vlan].member = member;
- gsw->vlan_entries[val->port_vlan].etags = etags;
-
- return 0;
-}
-
-static int mt753x_set_vid(struct switch_dev *dev,
- const struct switch_attr *attr,
- struct switch_val *val)
-{
- struct gsw_mt753x *gsw = container_of(dev, struct gsw_mt753x, swdev);
- int vlan;
- u16 vid;
-
- vlan = val->port_vlan;
- vid = (u16)val->value.i;
-
- if (vlan < 0 || vlan >= MT753X_NUM_VLANS)
- return -EINVAL;
-
- if (vid < MT753X_MIN_VID || vid > MT753X_MAX_VID)
- return -EINVAL;
-
- gsw->vlan_entries[vlan].vid = vid;
- return 0;
-}
-
-static int mt753x_get_vid(struct switch_dev *dev,
- const struct switch_attr *attr,
- struct switch_val *val)
-{
- val->value.i = val->port_vlan;
- return 0;
-}
-
-static int mt753x_get_port_link(struct switch_dev *dev, int port,
- struct switch_port_link *link)
-{
- struct gsw_mt753x *gsw = container_of(dev, struct gsw_mt753x, swdev);
- u32 speed, pmsr;
-
- if (port < 0 || port >= MT753X_NUM_PORTS)
- return -EINVAL;
-
- pmsr = mt753x_reg_read(gsw, PMSR(port));
-
- link->link = pmsr & MAC_LNK_STS;
- link->duplex = pmsr & MAC_DPX_STS;
- speed = (pmsr & MAC_SPD_STS_M) >> MAC_SPD_STS_S;
-
- switch (speed) {
- case MAC_SPD_10:
- link->speed = SWITCH_PORT_SPEED_10;
- break;
- case MAC_SPD_100:
- link->speed = SWITCH_PORT_SPEED_100;
- break;
- case MAC_SPD_1000:
- link->speed = SWITCH_PORT_SPEED_1000;
- break;
- case MAC_SPD_2500:
- /* TODO: swconfig has no support for 2500 now */
- link->speed = SWITCH_PORT_SPEED_UNKNOWN;
- break;
- }
-
- return 0;
-}
-
-static int mt753x_set_port_link(struct switch_dev *dev, int port,
- struct switch_port_link *link)
-{
-#ifndef MODULE
- if (port >= MT753X_NUM_PHYS)
- return -EINVAL;
-
- return switch_generic_set_link(dev, port, link);
-#else
- return -ENOTSUPP;
-#endif
-}
-
-static u64 get_mib_counter(struct gsw_mt753x *gsw, int i, int port)
-{
- unsigned int offset;
- u64 lo, hi, hi2;
-
- offset = mt753x_mibs[i].offset;
-
- if (mt753x_mibs[i].size == 1)
- return mt753x_reg_read(gsw, MIB_COUNTER_REG(port, offset));
-
- do {
- hi = mt753x_reg_read(gsw, MIB_COUNTER_REG(port, offset + 4));
- lo = mt753x_reg_read(gsw, MIB_COUNTER_REG(port, offset));
- hi2 = mt753x_reg_read(gsw, MIB_COUNTER_REG(port, offset + 4));
- } while (hi2 != hi);
-
- return (hi << 32) | lo;
-}
-
-static int mt753x_get_port_mib(struct switch_dev *dev,
- const struct switch_attr *attr,
- struct switch_val *val)
-{
- static char buf[4096];
- struct gsw_mt753x *gsw = container_of(dev, struct gsw_mt753x, swdev);
- int i, len = 0;
-
- if (val->port_vlan >= MT753X_NUM_PORTS)
- return -EINVAL;
-
- len += snprintf(buf + len, sizeof(buf) - len,
- "Port %d MIB counters\n", val->port_vlan);
-
- for (i = 0; i < ARRAY_SIZE(mt753x_mibs); ++i) {
- u64 counter;
-
- len += snprintf(buf + len, sizeof(buf) - len,
- "%-11s: ", mt753x_mibs[i].name);
- counter = get_mib_counter(gsw, i, val->port_vlan);
- len += snprintf(buf + len, sizeof(buf) - len, "%llu\n",
- counter);
- }
-
- val->value.s = buf;
- val->len = len;
- return 0;
-}
-
-static int mt753x_get_port_stats(struct switch_dev *dev, int port,
- struct switch_port_stats *stats)
-{
- struct gsw_mt753x *gsw = container_of(dev, struct gsw_mt753x, swdev);
-
- if (port < 0 || port >= MT753X_NUM_PORTS)
- return -EINVAL;
-
- stats->tx_bytes = get_mib_counter(gsw, MT753X_PORT_MIB_TXB_ID, port);
- stats->rx_bytes = get_mib_counter(gsw, MT753X_PORT_MIB_RXB_ID, port);
-
- return 0;
-}
-
-static void mt753x_port_isolation(struct gsw_mt753x *gsw)
-{
- int i;
-
- for (i = 0; i < MT753X_NUM_PORTS; i++)
- mt753x_reg_write(gsw, PCR(i),
- BIT(gsw->cpu_port) << PORT_MATRIX_S);
-
- mt753x_reg_write(gsw, PCR(gsw->cpu_port), PORT_MATRIX_M);
-
- for (i = 0; i < MT753X_NUM_PORTS; i++)
- mt753x_reg_write(gsw, PVC(i),
- (0x8100 << STAG_VPID_S) |
- (VA_TRANSPARENT_PORT << VLAN_ATTR_S));
-}
-
-static int mt753x_apply_config(struct switch_dev *dev)
-{
- struct gsw_mt753x *gsw = container_of(dev, struct gsw_mt753x, swdev);
-
- if (!gsw->global_vlan_enable) {
- mt753x_port_isolation(gsw);
- return 0;
- }
-
- mt753x_apply_vlan_config(gsw);
-
- return 0;
-}
-
-static int mt753x_reset_switch(struct switch_dev *dev)
-{
- struct gsw_mt753x *gsw = container_of(dev, struct gsw_mt753x, swdev);
- int i;
-
- memset(gsw->port_entries, 0, sizeof(gsw->port_entries));
- memset(gsw->vlan_entries, 0, sizeof(gsw->vlan_entries));
-
- /* set default vid of each vlan to the same number of vlan, so the vid
- * won't need be set explicitly.
- */
- for (i = 0; i < MT753X_NUM_VLANS; i++)
- gsw->vlan_entries[i].vid = i;
-
- return 0;
-}
-
-static int mt753x_phy_read16(struct switch_dev *dev, int addr, u8 reg,
- u16 *value)
-{
- struct gsw_mt753x *gsw = container_of(dev, struct gsw_mt753x, swdev);
-
- *value = gsw->mii_read(gsw, addr, reg);
-
- return 0;
-}
-
-static int mt753x_phy_write16(struct switch_dev *dev, int addr, u8 reg,
- u16 value)
-{
- struct gsw_mt753x *gsw = container_of(dev, struct gsw_mt753x, swdev);
-
- gsw->mii_write(gsw, addr, reg, value);
-
- return 0;
-}
-
-static const struct switch_attr mt753x_global[] = {
- {
- .type = SWITCH_TYPE_INT,
- .name = "enable_vlan",
- .description = "VLAN mode (1:enabled)",
- .max = 1,
- .id = MT753X_ATTR_ENABLE_VLAN,
- .get = mt753x_get_vlan_enable,
- .set = mt753x_set_vlan_enable,
- }
-};
-
-static const struct switch_attr mt753x_port[] = {
- {
- .type = SWITCH_TYPE_STRING,
- .name = "mib",
- .description = "Get MIB counters for port",
- .get = mt753x_get_port_mib,
- .set = NULL,
- },
-};
-
-static const struct switch_attr mt753x_vlan[] = {
- {
- .type = SWITCH_TYPE_INT,
- .name = "vid",
- .description = "VLAN ID (0-4094)",
- .set = mt753x_set_vid,
- .get = mt753x_get_vid,
- .max = 4094,
- },
-};
-
-static const struct switch_dev_ops mt753x_swdev_ops = {
- .attr_global = {
- .attr = mt753x_global,
- .n_attr = ARRAY_SIZE(mt753x_global),
- },
- .attr_port = {
- .attr = mt753x_port,
- .n_attr = ARRAY_SIZE(mt753x_port),
- },
- .attr_vlan = {
- .attr = mt753x_vlan,
- .n_attr = ARRAY_SIZE(mt753x_vlan),
- },
- .get_vlan_ports = mt753x_get_vlan_ports,
- .set_vlan_ports = mt753x_set_vlan_ports,
- .get_port_pvid = mt753x_get_port_pvid,
- .set_port_pvid = mt753x_set_port_pvid,
- .get_port_link = mt753x_get_port_link,
- .set_port_link = mt753x_set_port_link,
- .get_port_stats = mt753x_get_port_stats,
- .apply_config = mt753x_apply_config,
- .reset_switch = mt753x_reset_switch,
- .phy_read16 = mt753x_phy_read16,
- .phy_write16 = mt753x_phy_write16,
-};
-
-int mt753x_swconfig_init(struct gsw_mt753x *gsw)
-{
- struct device_node *np = gsw->dev->of_node;
- struct switch_dev *swdev;
- int ret;
-
- if (of_property_read_u32(np, "mediatek,cpuport", &gsw->cpu_port))
- gsw->cpu_port = MT753X_DFL_CPU_PORT;
-
- swdev = &gsw->swdev;
-
- swdev->name = gsw->name;
- swdev->alias = gsw->name;
- swdev->cpu_port = gsw->cpu_port;
- swdev->ports = MT753X_NUM_PORTS;
- swdev->vlans = MT753X_NUM_VLANS;
- swdev->ops = &mt753x_swdev_ops;
-
- ret = register_switch(swdev, NULL);
- if (ret) {
- dev_notice(gsw->dev, "Failed to register switch %s\n",
- swdev->name);
- return ret;
- }
-
- mt753x_apply_config(swdev);
-
- return 0;
-}
-
-void mt753x_swconfig_destroy(struct gsw_mt753x *gsw)
-{
- unregister_switch(&gsw->swdev);
-}
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (c) 2018 MediaTek Inc.
- * Author: Weijie Gao <weijie.gao@mediatek.com>
- */
-
-#ifndef _MT753X_SWCONFIG_H_
-#define _MT753X_SWCONFIG_H_
-
-#ifdef CONFIG_SWCONFIG
-#include <linux/switch.h>
-#include "mt753x.h"
-
-int mt753x_swconfig_init(struct gsw_mt753x *gsw);
-void mt753x_swconfig_destroy(struct gsw_mt753x *gsw);
-#else
-static inline int mt753x_swconfig_init(struct gsw_mt753x *gsw)
-{
- mt753x_apply_vlan_config(gsw);
-
- return 0;
-}
-
-static inline void mt753x_swconfig_destroy(struct gsw_mt753x *gsw)
-{
-}
-#endif
-
-#endif /* _MT753X_SWCONFIG_H_ */
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2018 MediaTek Inc.
- */
-
-#include "mt753x.h"
-#include "mt753x_regs.h"
-
-struct mt753x_mapping mt753x_def_mapping[] = {
- {
- .name = "llllw",
- .pvids = { 1, 1, 1, 1, 2, 2, 1 },
- .members = { 0, 0x4f, 0x30 },
- .etags = { 0, 0, 0 },
- .vids = { 0, 1, 2 },
- }, {
- .name = "wllll",
- .pvids = { 2, 1, 1, 1, 1, 2, 1 },
- .members = { 0, 0x5e, 0x21 },
- .etags = { 0, 0, 0 },
- .vids = { 0, 1, 2 },
- }, {
- .name = "lwlll",
- .pvids = { 1, 2, 1, 1, 1, 2, 1 },
- .members = { 0, 0x5d, 0x22 },
- .etags = { 0, 0, 0 },
- .vids = { 0, 1, 2 },
- },
-};
-
-void mt753x_vlan_ctrl(struct gsw_mt753x *gsw, u32 cmd, u32 val)
-{
- int i;
-
- mt753x_reg_write(gsw, VTCR,
- VTCR_BUSY | ((cmd << VTCR_FUNC_S) & VTCR_FUNC_M) |
- (val & VTCR_VID_M));
-
- for (i = 0; i < 300; i++) {
- u32 val = mt753x_reg_read(gsw, VTCR);
-
- if ((val & VTCR_BUSY) == 0)
- break;
-
- usleep_range(1000, 1100);
- }
-
- if (i == 300)
- dev_info(gsw->dev, "vtcr timeout\n");
-}
-
-static void mt753x_write_vlan_entry(struct gsw_mt753x *gsw, int vlan, u16 vid,
- u8 ports, u8 etags)
-{
- int port;
- u32 val;
-
- /* vlan port membership */
- if (ports)
- mt753x_reg_write(gsw, VAWD1,
- IVL_MAC | VTAG_EN | VENTRY_VALID |
- ((ports << PORT_MEM_S) & PORT_MEM_M));
- else
- mt753x_reg_write(gsw, VAWD1, 0);
-
- /* egress mode */
- val = 0;
- for (port = 0; port < MT753X_NUM_PORTS; port++) {
- if (etags & BIT(port))
- val |= ETAG_CTRL_TAG << PORT_ETAG_S(port);
- else
- val |= ETAG_CTRL_UNTAG << PORT_ETAG_S(port);
- }
- mt753x_reg_write(gsw, VAWD2, val);
-
- /* write to vlan table */
- mt753x_vlan_ctrl(gsw, VTCR_WRITE_VLAN_ENTRY, vid);
-}
-
-void mt753x_apply_vlan_config(struct gsw_mt753x *gsw)
-{
- int i, j;
- u8 tag_ports;
- u8 untag_ports;
-
- /* set all ports as security mode */
- for (i = 0; i < MT753X_NUM_PORTS; i++)
- mt753x_reg_write(gsw, PCR(i),
- PORT_MATRIX_M | SECURITY_MODE);
-
- /* check if a port is used in tag/untag vlan egress mode */
- tag_ports = 0;
- untag_ports = 0;
-
- for (i = 0; i < MT753X_NUM_VLANS; i++) {
- u8 member = gsw->vlan_entries[i].member;
- u8 etags = gsw->vlan_entries[i].etags;
-
- if (!member)
- continue;
-
- for (j = 0; j < MT753X_NUM_PORTS; j++) {
- if (!(member & BIT(j)))
- continue;
-
- if (etags & BIT(j))
- tag_ports |= 1u << j;
- else
- untag_ports |= 1u << j;
- }
- }
-
- /* set all untag-only ports as transparent and the rest as user port */
- for (i = 0; i < MT753X_NUM_PORTS; i++) {
- u32 pvc_mode = 0x8100 << STAG_VPID_S;
-
- if (untag_ports & BIT(i) && !(tag_ports & BIT(i)))
- pvc_mode = (0x8100 << STAG_VPID_S) |
- (VA_TRANSPARENT_PORT << VLAN_ATTR_S);
-
- mt753x_reg_write(gsw, PVC(i), pvc_mode);
- }
-
- /* first clear the switch vlan table */
- for (i = 0; i < MT753X_NUM_VLANS; i++)
- mt753x_write_vlan_entry(gsw, i, i, 0, 0);
-
- /* now program only vlans with members to avoid
- * clobbering remapped entries in later iterations
- */
- for (i = 0; i < MT753X_NUM_VLANS; i++) {
- u16 vid = gsw->vlan_entries[i].vid;
- u8 member = gsw->vlan_entries[i].member;
- u8 etags = gsw->vlan_entries[i].etags;
-
- if (member)
- mt753x_write_vlan_entry(gsw, i, vid, member, etags);
- }
-
- /* Port Default PVID */
- for (i = 0; i < MT753X_NUM_PORTS; i++) {
- int vlan = gsw->port_entries[i].pvid;
- u16 pvid = 0;
- u32 val;
-
- if (vlan < MT753X_NUM_VLANS && gsw->vlan_entries[vlan].member)
- pvid = gsw->vlan_entries[vlan].vid;
-
- val = mt753x_reg_read(gsw, PPBV1(i));
- val &= ~GRP_PORT_VID_M;
- val |= pvid;
- mt753x_reg_write(gsw, PPBV1(i), val);
- }
-}
-
-struct mt753x_mapping *mt753x_find_mapping(struct device_node *np)
-{
- const char *map;
- int i;
-
- if (of_property_read_string(np, "mediatek,portmap", &map))
- return NULL;
-
- for (i = 0; i < ARRAY_SIZE(mt753x_def_mapping); i++)
- if (!strcmp(map, mt753x_def_mapping[i].name))
- return &mt753x_def_mapping[i];
-
- return NULL;
-}
-
-void mt753x_apply_mapping(struct gsw_mt753x *gsw, struct mt753x_mapping *map)
-{
- int i = 0;
-
- for (i = 0; i < MT753X_NUM_PORTS; i++)
- gsw->port_entries[i].pvid = map->pvids[i];
-
- for (i = 0; i < MT753X_NUM_VLANS; i++) {
- gsw->vlan_entries[i].member = map->members[i];
- gsw->vlan_entries[i].etags = map->etags[i];
- gsw->vlan_entries[i].vid = map->vids[i];
- }
-}
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (c) 2018 MediaTek Inc.
- */
-
-#ifndef _MT753X_VLAN_H_
-#define _MT753X_VLAN_H_
-
-#define MT753X_NUM_PORTS 7
-#define MT753X_NUM_VLANS 4095
-#define MT753X_MAX_VID 4095
-#define MT753X_MIN_VID 0
-
-struct gsw_mt753x;
-
-struct mt753x_port_entry {
- u16 pvid;
-};
-
-struct mt753x_vlan_entry {
- u16 vid;
- u8 member;
- u8 etags;
-};
-
-struct mt753x_mapping {
- char *name;
- u16 pvids[MT753X_NUM_PORTS];
- u8 members[MT753X_NUM_VLANS];
- u8 etags[MT753X_NUM_VLANS];
- u16 vids[MT753X_NUM_VLANS];
-};
-
-extern struct mt753x_mapping mt753x_defaults[];
-
-void mt753x_vlan_ctrl(struct gsw_mt753x *gsw, u32 cmd, u32 val);
-void mt753x_apply_vlan_config(struct gsw_mt753x *gsw);
-struct mt753x_mapping *mt753x_find_mapping(struct device_node *np);
-void mt753x_apply_mapping(struct gsw_mt753x *gsw, struct mt753x_mapping *map);
-#endif /* _MT753X_VLAN_H_ */
+++ /dev/null
-CONFIG_64BIT=y
-CONFIG_AHCI_MTK=y
-# CONFIG_ANDROID_DEFAULT_SETTING is not set
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
-CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
-CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
-CONFIG_ARCH_HAS_KCOV=y
-CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
-CONFIG_ARCH_HAS_PTE_SPECIAL=y
-CONFIG_ARCH_HAS_SET_MEMORY=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
-CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
-CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
-CONFIG_ARCH_INLINE_READ_LOCK=y
-CONFIG_ARCH_INLINE_READ_LOCK_BH=y
-CONFIG_ARCH_INLINE_READ_LOCK_IRQ=y
-CONFIG_ARCH_INLINE_READ_LOCK_IRQSAVE=y
-CONFIG_ARCH_INLINE_READ_UNLOCK=y
-CONFIG_ARCH_INLINE_READ_UNLOCK_BH=y
-CONFIG_ARCH_INLINE_READ_UNLOCK_IRQ=y
-CONFIG_ARCH_INLINE_READ_UNLOCK_IRQRESTORE=y
-CONFIG_ARCH_INLINE_SPIN_LOCK=y
-CONFIG_ARCH_INLINE_SPIN_LOCK_BH=y
-CONFIG_ARCH_INLINE_SPIN_LOCK_IRQ=y
-CONFIG_ARCH_INLINE_SPIN_LOCK_IRQSAVE=y
-CONFIG_ARCH_INLINE_SPIN_TRYLOCK=y
-CONFIG_ARCH_INLINE_SPIN_TRYLOCK_BH=y
-CONFIG_ARCH_INLINE_SPIN_UNLOCK=y
-CONFIG_ARCH_INLINE_SPIN_UNLOCK_BH=y
-CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQ=y
-CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE=y
-CONFIG_ARCH_INLINE_WRITE_LOCK=y
-CONFIG_ARCH_INLINE_WRITE_LOCK_BH=y
-CONFIG_ARCH_INLINE_WRITE_LOCK_IRQ=y
-CONFIG_ARCH_INLINE_WRITE_LOCK_IRQSAVE=y
-CONFIG_ARCH_INLINE_WRITE_UNLOCK=y
-CONFIG_ARCH_INLINE_WRITE_UNLOCK_BH=y
-CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQ=y
-CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE=y
-CONFIG_ARCH_MEDIATEK=y
-CONFIG_ARCH_MMAP_RND_BITS=18
-CONFIG_ARCH_MMAP_RND_BITS_MAX=24
-CONFIG_ARCH_MMAP_RND_BITS_MIN=18
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS=11
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_ARCH_SUPPORTS_INT128=y
-CONFIG_ARCH_SUPPORTS_LTO_CLANG=y
-CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
-CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
-CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
-CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WANT_FRAME_POINTERS=y
-CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
-CONFIG_ARM64=y
-# CONFIG_ARM64_16K_PAGES is not set
-CONFIG_ARM64_4K_PAGES=y
-# CONFIG_ARM64_64K_PAGES is not set
-CONFIG_ARM64_CONT_SHIFT=4
-# CONFIG_ARM64_CRYPTO is not set
-# CONFIG_ARM64_ERRATUM_1463225 is not set
-CONFIG_ARM64_HW_AFDBM=y
-# CONFIG_ARM64_LSE_ATOMICS is not set
-CONFIG_ARM64_PAGE_SHIFT=12
-CONFIG_ARM64_PAN=y
-CONFIG_ARM64_PA_BITS=48
-CONFIG_ARM64_PA_BITS_48=y
-# CONFIG_ARM64_PMEM is not set
-# CONFIG_ARM64_PTDUMP_DEBUGFS is not set
-# CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET is not set
-CONFIG_ARM64_SSBD=y
-CONFIG_ARM64_SVE=y
-# CONFIG_ARM64_SW_TTBR0_PAN is not set
-CONFIG_ARM64_UAO=y
-CONFIG_ARM64_VA_BITS=39
-CONFIG_ARM64_VA_BITS_39=y
-# CONFIG_ARM64_VA_BITS_48 is not set
-CONFIG_ARM64_VHE=y
-# CONFIG_ARMV8_DEPRECATED is not set
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GIC_V2M=y
-CONFIG_ARM_GIC_V3=y
-CONFIG_ARM_GIC_V3_ITS=y
-CONFIG_ARM_GIC_V3_ITS_PCI=y
-CONFIG_ARM_MEDIATEK_CPUFREQ=y
-CONFIG_ARM_PMU=y
-CONFIG_ARM_PSCI_FW=y
-# CONFIG_ARM_SP805_WATCHDOG is not set
-CONFIG_ATA=y
-CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BLOCK_COMPAT=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_BT=y
-CONFIG_BT_BCM=y
-CONFIG_BT_BREDR=y
-CONFIG_BT_DEBUGFS=y
-CONFIG_BT_HCIUART=y
-CONFIG_BT_HCIUART_BCM=y
-# CONFIG_BT_HCIUART_INTEL is not set
-# CONFIG_BT_HCIUART_NOKIA is not set
-CONFIG_BT_HCIUART_QCA=y
-CONFIG_BT_HCIUART_SERDEV=y
-CONFIG_BT_HCIVHCI=y
-CONFIG_BT_HS=y
-CONFIG_BT_LE=y
-CONFIG_BT_MTKUART=y
-CONFIG_BT_QCA=y
-CONFIG_BUILD_BIN2C=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLOCK_THERMAL=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_MEDIATEK=y
-CONFIG_COMMON_CLK_MT2712=y
-# CONFIG_COMMON_CLK_MT2712_BDPSYS is not set
-# CONFIG_COMMON_CLK_MT2712_IMGSYS is not set
-# CONFIG_COMMON_CLK_MT2712_JPGDECSYS is not set
-# CONFIG_COMMON_CLK_MT2712_MFGCFG is not set
-# CONFIG_COMMON_CLK_MT2712_MMSYS is not set
-# CONFIG_COMMON_CLK_MT2712_VDECSYS is not set
-# CONFIG_COMMON_CLK_MT2712_VENCSYS is not set
-# CONFIG_COMMON_CLK_MT6779 is not set
-# CONFIG_COMMON_CLK_MT6797 is not set
-CONFIG_COMMON_CLK_MT7622=y
-CONFIG_COMMON_CLK_MT7622_AUDSYS=y
-CONFIG_COMMON_CLK_MT7622_ETHSYS=y
-CONFIG_COMMON_CLK_MT7622_HIFSYS=y
-# CONFIG_COMMON_CLK_MT8173 is not set
-CONFIG_COMPAT=y
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_COMPAT_BINFMT_ELF=y
-CONFIG_COMPAT_NETLINK_MESSAGES=y
-CONFIG_COMPAT_OLD_SIGACTION=y
-CONFIG_CONSOLE_LOGLEVEL_DEFAULT=15
-# CONFIG_CPUFREQ_DT is not set
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_FREQ=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_TIMES is not set
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_THERMAL=y
-CONFIG_CRC16=y
-# CONFIG_CRYPTO_ADIANTUM is not set
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_CMAC=y
-CONFIG_CRYPTO_DRBG=y
-CONFIG_CRYPTO_DRBG_HMAC=y
-CONFIG_CRYPTO_DRBG_MENU=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_ECDH=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_JITTERENTROPY=y
-CONFIG_CRYPTO_KPP=y
-CONFIG_CRYPTO_KPP2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_RNG_DEFAULT=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_CUSTOM_KERNEL_LCM=""
-CONFIG_CUSTOM_LCM_X="0"
-CONFIG_CUSTOM_LCM_Y="0"
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_DEFAULT_NOOP=y
-# CONFIG_DEVAPC_ARCH_V1 is not set
-# CONFIG_DEVAPC_MT6779 is not set
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_DMADEVICES=y
-CONFIG_DMATEST=y
-CONFIG_DMA_DIRECT_OPS=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_ENGINE_RAID=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_DTC=y
-CONFIG_DYNAMIC_DEBUG=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EINT_MTK=y
-# CONFIG_ENERGY_MODEL is not set
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPS is not set
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_BITREVERSE=y
-CONFIG_HAVE_ARCH_HUGE_VMAP=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KASAN=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
-CONFIG_HAVE_ARCH_VMAP_STACK=y
-CONFIG_HAVE_ARM_SMCCC=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CMPXCHG_DOUBLE=y
-CONFIG_HAVE_CMPXCHG_LOCAL=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_BUGVERBOSE=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EBPF_JIT=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_GUP=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_PATA_PLATFORM=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_RCU_TABLE_FREE=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_RSEQ=y
-CONFIG_HAVE_SCHED_AVG_IRQ=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HOLES_IN_ZONE=y
-# CONFIG_HUGETLBFS is not set
-CONFIG_ICPLUS_PHY=y
-CONFIG_IIO=y
-# CONFIG_IIO_BUFFER is not set
-# CONFIG_IIO_TRIGGER is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INLINE_READ_LOCK=y
-CONFIG_INLINE_READ_LOCK_BH=y
-CONFIG_INLINE_READ_LOCK_IRQ=y
-CONFIG_INLINE_READ_LOCK_IRQSAVE=y
-CONFIG_INLINE_READ_UNLOCK_BH=y
-CONFIG_INLINE_READ_UNLOCK_IRQRESTORE=y
-CONFIG_INLINE_SPIN_LOCK=y
-CONFIG_INLINE_SPIN_LOCK_BH=y
-CONFIG_INLINE_SPIN_LOCK_IRQ=y
-CONFIG_INLINE_SPIN_LOCK_IRQSAVE=y
-CONFIG_INLINE_SPIN_TRYLOCK=y
-CONFIG_INLINE_SPIN_TRYLOCK_BH=y
-CONFIG_INLINE_SPIN_UNLOCK_BH=y
-CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE=y
-CONFIG_INLINE_WRITE_LOCK=y
-CONFIG_INLINE_WRITE_LOCK_BH=y
-CONFIG_INLINE_WRITE_LOCK_IRQ=y
-CONFIG_INLINE_WRITE_LOCK_IRQSAVE=y
-CONFIG_INLINE_WRITE_UNLOCK_BH=y
-CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE=y
-# CONFIG_INTERCONNECT is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_TIME_ACCOUNTING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JUMP_LABEL=y
-CONFIG_LCM_HEIGHT="1920"
-CONFIG_LCM_WIDTH="1080"
-# CONFIG_LEGACY_ENERGY_MODEL_DT is not set
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LTO_NONE=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_MARVELL_88Q_PHY is not set
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MEDIATEK_MT6577_AUXADC=y
-CONFIG_MEDIATEK_WATCHDOG=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MESSAGE_LOGLEVEL_DEFAULT=7
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_MTK=y
-# CONFIG_MMC_TIFM_SD is not set
-# CONFIG_MMPROFILE is not set
-CONFIG_MODULES_TREE_LOOKUP=y
-CONFIG_MODULES_USE_ELF_RELA=y
-CONFIG_MT753X_GSW=y
-# CONFIG_MTD_GPT_PARTS is not set
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_CORE=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_MTK=y
-CONFIG_MTD_SPI_NAND=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_FIT_FW=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-# CONFIG_MTK_AAL_SUPPORT is not set
-# CONFIG_MTK_ANDROID_DEFAULT_SETTING is not set
-# CONFIG_MTK_ATF_LOGGER is not set
-# CONFIG_MTK_BTIF is not set
-# CONFIG_MTK_CMDQ is not set
-# CONFIG_MTK_COMBO is not set
-# CONFIG_MTK_CONNSYS_DEDICATED_LOG_PATH is not set
-# CONFIG_MTK_CONN_LTE_IDC_SUPPORT is not set
-# CONFIG_MTK_CONN_MT3337_CHIP_SUPPORT is not set
-# CONFIG_MTK_CONSUMER_PARTIAL_UPDATE_SUPPORT is not set
-# CONFIG_MTK_DEVAPC is not set
-# CONFIG_MTK_DHCPV6C_WIFI is not set
-# CONFIG_MTK_DISPLAY_LOW_MEMORY_DEBUG_SUPPORT is not set
-CONFIG_MTK_DISP_PLATFORM=""
-# CONFIG_MTK_DRE30_SUPPORT is not set
-# CONFIG_MTK_DVFSRC is not set
-CONFIG_MTK_EFUSE=y
-# CONFIG_MTK_GED_SUPPORT is not set
-# CONFIG_MTK_GPS_SUPPORT is not set
-# CONFIG_MTK_GPU_COMMON_DVFS_SUPPORT is not set
-# CONFIG_MTK_GPU_SUPPORT is not set
-CONFIG_MTK_GPU_VERSION=""
-CONFIG_MTK_HSDMA=y
-CONFIG_MTK_ICE_DEBUG=y
-CONFIG_MTK_INFRACFG=y
-# CONFIG_MTK_LCM is not set
-# CONFIG_MTK_LCM_DEVICE_TREE_SUPPORT is not set
-CONFIG_MTK_LCM_PHYSICAL_ROTATION=""
-# CONFIG_MTK_MERGE_INTERFACE_SUPPORT is not set
-# CONFIG_MTK_MET_CORE is not set
-# CONFIG_MTK_MET_MEM_ALLOC is not set
-# CONFIG_MTK_MMDVFS is not set
-# CONFIG_MTK_MMPROFILE_SUPPORT is not set
-# CONFIG_MTK_OD_SUPPORT is not set
-# CONFIG_MTK_OVERLAY_ENGINE_SUPPORT is not set
-CONFIG_MTK_PMIC_WRAP=y
-CONFIG_MTK_PQ_COLOR_MODE="DISP"
-# CONFIG_MTK_REBOOT_MODE is not set
-# CONFIG_MTK_ROUND_CORNER_SUPPORT is not set
-# CONFIG_MTK_SCHED_INTEROP is not set
-CONFIG_MTK_SCPSYS=y
-# CONFIG_MTK_SCPSYS_BRINGUP is not set
-# CONFIG_MTK_SPMTWAM is not set
-CONFIG_MTK_THERMAL=y
-CONFIG_MTK_TIMER=y
-# CONFIG_MTK_TINYSYS_SSPM_PLT_SUPPORT is not set
-# CONFIG_MTK_TINYSYS_SSPM_SUPPORT is not set
-# CONFIG_MTK_VIDEOX is not set
-# CONFIG_MTPROF is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_MEDIATEK_SOC=y
-CONFIG_NET_VENDOR_MEDIATEK=y
-CONFIG_NLS=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=2
-# CONFIG_NUMA is not set
-CONFIG_NVMEM=y
-# CONFIG_NXP_TJA1100_PHY is not set
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_PADATA=y
-CONFIG_PARTITION_PERCPU=y
-CONFIG_PCI=y
-CONFIG_PCIE_MEDIATEK=y
-CONFIG_PCI_DEBUG=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-CONFIG_PERF_EVENTS=y
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PHYLIB=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PHY_MTK_TPHY=y
-# CONFIG_PHY_MTK_UFS is not set
-# CONFIG_PHY_MTK_XSPHY is not set
-CONFIG_PINCTRL=y
-# CONFIG_PINCTRL_MT2712 is not set
-# CONFIG_PINCTRL_MT6765 is not set
-# CONFIG_PINCTRL_MT6779 is not set
-# CONFIG_PINCTRL_MT6797 is not set
-CONFIG_PINCTRL_MT7622=y
-# CONFIG_PINCTRL_MT8173 is not set
-# CONFIG_PINCTRL_MT8183 is not set
-CONFIG_PINCTRL_MTK_MOORE=y
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_GENERIC_DOMAINS=y
-CONFIG_PM_GENERIC_DOMAINS_OF=y
-CONFIG_PM_OPP=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_SYSCON=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PRINTK_TIME=y
-# CONFIG_PROC_UID is not set
-# CONFIG_PSI is not set
-CONFIG_PWM=y
-CONFIG_PWM_MEDIATEK=y
-# CONFIG_PWM_MTK_DISP is not set
-CONFIG_PWM_SYSFS=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-# CONFIG_RANDOMIZE_BASE is not set
-CONFIG_RAS=y
-CONFIG_RATIONAL=y
-# CONFIG_RAVE_SP_CORE is not set
-CONFIG_RCU_NEED_SEGCBLIST=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_REALTEK_PHY=y
-CONFIG_REFCOUNT_FULL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_MT6380=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_MT7622=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RTL8367S_GSW=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SCHED_MC=y
-# CONFIG_SCHED_TUNE is not set
-CONFIG_SCSI=y
-# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
-# CONFIG_SECURITY_PERF_EVENTS_RESTRICT is not set
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_MT6577=y
-CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIAL_DEV_BUS=y
-CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SG_POOL=y
-# CONFIG_SINGLE_PANEL_OUTPUT is not set
-CONFIG_SMP=y
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SPI_MT65XX=y
-# CONFIG_SPI_MTK_QUADSPI is not set
-CONFIG_SPI_MTK_SNFI=y
-CONFIG_SRCU=y
-CONFIG_SWIOTLB=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYSVIPC_COMPAT=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_EMULATION=y
-CONFIG_THERMAL_GOV_BANG_BANG=y
-CONFIG_THERMAL_GOV_FAIR_SHARE=y
-CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_GOV_USER_SPACE=y
-CONFIG_THERMAL_OF=y
-CONFIG_THERMAL_WRITABLE_TRIPS=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-# CONFIG_UNMAP_KERNEL_AT_EL0 is not set
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_MTK=y
-# CONFIG_USB_XHCI_PLATFORM is not set
-CONFIG_VMAP_STACK=y
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_NOOP is not set
-CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC=y
-CONFIG_WATCHDOG_PRETIMEOUT_GOV=y
-# CONFIG_WATCHDOG_PRETIMEOUT_GOV_NOOP is not set
-CONFIG_WATCHDOG_PRETIMEOUT_GOV_PANIC=y
-CONFIG_WATCHDOG_SYSFS=y
-CONFIG_XPS=y
-CONFIG_ZONE_DMA32=y
+++ /dev/null
-# CONFIG_AIO is not set
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_KCOV=y
-CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
-CONFIG_ARCH_HAS_PHYS_TO_DMA=y
-CONFIG_ARCH_HAS_SET_MEMORY=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
-CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MEDIATEK=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARM=y
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-# CONFIG_ARM_ATAG_DTB_COMPAT is not set
-CONFIG_ARM_CPU_SUSPEND=y
-# CONFIG_ARM_CPU_TOPOLOGY is not set
-CONFIG_ARM_GIC=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-# CONFIG_ARM_LPAE is not set
-CONFIG_ARM_MEDIATEK_CPUFREQ=y
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-# CONFIG_ARM_SMMU is not set
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_THUMBEE=y
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ATAGS=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BOUNCE=y
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_CLEANCACHE=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="earlyprintk console=ttyS0,115200 rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_FROM_BOOTLOADER=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_MEDIATEK=y
-CONFIG_COMMON_CLK_MT2701=y
-# CONFIG_COMMON_CLK_MT2701_AUDSYS is not set
-CONFIG_COMMON_CLK_MT2701_BDPSYS=y
-CONFIG_COMMON_CLK_MT2701_ETHSYS=y
-# CONFIG_COMMON_CLK_MT2701_G3DSYS is not set
-CONFIG_COMMON_CLK_MT2701_HIFSYS=y
-CONFIG_COMMON_CLK_MT2701_IMGSYS=y
-CONFIG_COMMON_CLK_MT2701_MMSYS=y
-CONFIG_COMMON_CLK_MT2701_VDECSYS=y
-# CONFIG_COMMON_CLK_MT7622 is not set
-# CONFIG_COMMON_CLK_MT7629 is not set
-# CONFIG_COMMON_CLK_MT7629_ETHSYS is not set
-# CONFIG_COMMON_CLK_MT7629_HIFSYS is not set
-# CONFIG_COMMON_CLK_MT8135 is not set
-# CONFIG_COMMON_CLK_MT8173 is not set
-CONFIG_COREDUMP=y
-# CONFIG_CPUFREQ_DT is not set
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_HAS_ASID=y
-# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SPECTRE=y
-# CONFIG_CPU_THERMAL is not set
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-# CONFIG_CRC32_SARWATE is not set
-CONFIG_CRC32_SLICEBY8=y
-CONFIG_CROSS_MEMORY_ATTACH=y
-CONFIG_CRYPTO_ACOMP2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CTR=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_DEV_MEDIATEK=y
-CONFIG_CRYPTO_DRBG=y
-CONFIG_CRYPTO_DRBG_HMAC=y
-CONFIG_CRYPTO_DRBG_MENU=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_JITTERENTROPY=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_RNG_DEFAULT=y
-CONFIG_CRYPTO_SEQIV=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_ALIGN_RODATA=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_GPIO=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
-CONFIG_DEBUG_MT6589_UART0=y
-# CONFIG_DEBUG_MT8127_UART0 is not set
-# CONFIG_DEBUG_MT8135_UART3 is not set
-CONFIG_DEBUG_PREEMPT=y
-CONFIG_DEBUG_UART_8250=y
-# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
-CONFIG_DEBUG_UART_8250_SHIFT=2
-# CONFIG_DEBUG_UART_8250_WORD is not set
-CONFIG_DEBUG_UART_PHYS=0x11004000
-CONFIG_DEBUG_UART_VIRT=0xf1004000
-CONFIG_DEBUG_UNCOMPRESS=y
-# CONFIG_DEBUG_USER is not set
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EINT_MTK=y
-CONFIG_ELF_CORE=y
-CONFIG_EXT4_FS=y
-CONFIG_F2FS_FS=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FREEZER=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GPIOLIB=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_BITREVERSE=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARM_ARCH_TIMER=y
-CONFIG_HAVE_ARM_SMCCC=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
-CONFIG_HAVE_EBPF_JIT=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_RSEQ=y
-CONFIG_HAVE_SMP=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HIGHMEM=y
-# CONFIG_HIGHPTE is not set
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HWMON=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_MTK=y
-CONFIG_HZ_FIXED=0
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MT65XX=y
-CONFIG_ICPLUS_PHY=y
-CONFIG_IIO=y
-# CONFIG_IIO_BUFFER is not set
-# CONFIG_IIO_TRIGGER is not set
-CONFIG_INITRAMFS_COMPRESSION=""
-CONFIG_INITRAMFS_ROOT_GID=1000
-CONFIG_INITRAMFS_ROOT_UID=1000
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_IOMMU_DEBUGFS is not set
-# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
-# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
-CONFIG_IOMMU_SUPPORT=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-CONFIG_KALLSYMS=y
-CONFIG_LEDS_MT6323=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-# CONFIG_MACH_MT2701 is not set
-# CONFIG_MACH_MT6589 is not set
-# CONFIG_MACH_MT6592 is not set
-CONFIG_MACH_MT7623=y
-# CONFIG_MACH_MT7629 is not set
-# CONFIG_MACH_MT8127 is not set
-# CONFIG_MACH_MT8135 is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MDIO_BITBANG=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_GPIO=y
-CONFIG_MEDIATEK_MT6577_AUXADC=y
-CONFIG_MEDIATEK_WATCHDOG=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MFD_CORE=y
-CONFIG_MFD_MT6397=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_MTK=y
-CONFIG_MMC_SDHCI=y
-# CONFIG_MMC_SDHCI_PCI is not set
-CONFIG_MMC_SDHCI_PLTFM=y
-# CONFIG_MMC_TIFM_SD is not set
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MT753X_GSW is not set
-CONFIG_MTD_BLOCK2MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_MT81xx_NOR=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_MTK=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTK_EFUSE=y
-# CONFIG_MTK_HSDMA is not set
-CONFIG_MTK_INFRACFG=y
-# CONFIG_MTK_IOMMU is not set
-# CONFIG_MTK_IOMMU_V1 is not set
-CONFIG_MTK_PMIC_WRAP=y
-CONFIG_MTK_SCPSYS=y
-CONFIG_MTK_THERMAL=y
-CONFIG_MTK_TIMER=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEON=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_MT7530=y
-CONFIG_NET_DSA_TAG_MTK=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_MEDIATEK_SOC=y
-CONFIG_NET_SWITCHDEV=y
-# CONFIG_NET_VENDOR_AURORA is not set
-CONFIG_NET_VENDOR_MEDIATEK=y
-# CONFIG_NET_VENDOR_WIZNET is not set
-CONFIG_NLS=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NO_HZ=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=4
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_MEDIATEK=y
-CONFIG_PCIE_PME=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-# CONFIG_PCI_V3_SEMI is not set
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-CONFIG_PHY_MTK_TPHY=y
-# CONFIG_PHY_MTK_XSPHY is not set
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_MT2701=y
-CONFIG_PINCTRL_MT6397=y
-CONFIG_PINCTRL_MT7623=y
-# CONFIG_PINCTRL_MT7629 is not set
-CONFIG_PINCTRL_MTK=y
-CONFIG_PINCTRL_MTK_MOORE=y
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_GENERIC_DOMAINS=y
-CONFIG_PM_GENERIC_DOMAINS_OF=y
-CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
-CONFIG_PM_OPP=y
-CONFIG_PM_SLEEP=y
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PREEMPT=y
-CONFIG_PREEMPT_COUNT=y
-# CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_RCU=y
-CONFIG_PRINTK_TIME=y
-CONFIG_PWM=y
-CONFIG_PWM_MEDIATEK=y
-# CONFIG_PWM_MTK_DISP is not set
-CONFIG_PWM_SYSFS=y
-CONFIG_RAS=y
-CONFIG_RATIONAL=y
-CONFIG_RCU_CPU_STALL_TIMEOUT=21
-# CONFIG_RCU_EXPERT is not set
-CONFIG_RCU_NEED_SEGCBLIST=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_REFCOUNT_FULL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_REGULATOR_MT6323=y
-# CONFIG_REGULATOR_MT6380 is not set
-# CONFIG_REGULATOR_MT6397 is not set
-# CONFIG_REGULATOR_QCOM_SPMI is not set
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_MT6397 is not set
-# CONFIG_RTC_DRV_MT7622 is not set
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_SERIAL_8250_DMA is not set
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_MT6577=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SFP is not set
-CONFIG_SGL_ALLOC=y
-CONFIG_SMP=y
-# CONFIG_SMP_ON_UP is not set
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SPI_MT65XX=y
-# CONFIG_SPI_MTK_SNFI is not set
-CONFIG_SPMI=y
-CONFIG_SRCU=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_SWCONFIG=y
-CONFIG_SWPHY=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_TASKS_RCU=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_OF=y
-# CONFIG_THUMB2_KERNEL is not set
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TREE_SRCU=y
-CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_UEVENT_HELPER_PATH=""
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNINLINE_SPIN_UNLOCK=y
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_MTK=y
-CONFIG_USB_XHCI_PLATFORM=y
-CONFIG_USE_OF=y
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
+++ /dev/null
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_KCOV=y
-CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
-CONFIG_ARCH_HAS_PHYS_TO_DMA=y
-CONFIG_ARCH_HAS_SET_MEMORY=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
-CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MEDIATEK=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARM=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_HEAVY_MB=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-# CONFIG_ARM_LPAE is not set
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_PMU=y
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ATAGS=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_CACHE_L2X0=y
-# CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CHR_DEV_SCH=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
-CONFIG_CMDLINE_FROM_BOOTLOADER=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_MEDIATEK=y
-# CONFIG_COMMON_CLK_MT2701 is not set
-# CONFIG_COMMON_CLK_MT7622 is not set
-CONFIG_COMMON_CLK_MT7629=y
-CONFIG_COMMON_CLK_MT7629_ETHSYS=y
-CONFIG_COMMON_CLK_MT7629_HIFSYS=y
-# CONFIG_COMMON_CLK_MT8135 is not set
-# CONFIG_COMMON_CLK_MT8173 is not set
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_HAS_ASID=y
-# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_IDLE=y
-# CONFIG_CPU_IDLE_GOV_LADDER is not set
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SPECTRE=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_ACOMP2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-# CONFIG_DEBUG_USER is not set
-CONFIG_DEFAULT_HOSTNAME="(mt7629)"
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DTC=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EINT_MTK=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FRAME_POINTER=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GPIOLIB=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-# CONFIG_HARDENED_USERCOPY is not set
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_BITREVERSE=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARM_ARCH_TIMER=y
-CONFIG_HAVE_ARM_SMCCC=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
-CONFIG_HAVE_EBPF_JIT=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_RSEQ=y
-CONFIG_HAVE_SCHED_AVG_IRQ=y
-CONFIG_HAVE_SMP=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_MTK=y
-CONFIG_HZ_FIXED=0
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_TIME_ACCOUNTING=y
-CONFIG_IRQ_WORK=y
-# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-# CONFIG_MACH_MT2701 is not set
-# CONFIG_MACH_MT6589 is not set
-# CONFIG_MACH_MT6592 is not set
-# CONFIG_MACH_MT7623 is not set
-CONFIG_MACH_MT7629=y
-# CONFIG_MACH_MT8127 is not set
-# CONFIG_MACH_MT8135 is not set
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MEDIATEK_WATCHDOG=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MIGRATION=y
-CONFIG_MODULES_TREE_LOOKUP=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MT753X_GSW=y
-CONFIG_MTD_MT81xx_NOR=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_CORE=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_MTK=y
-CONFIG_MTD_SPI_NAND=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_FIT_FW=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-# CONFIG_MTK_EFUSE is not set
-CONFIG_MTK_INFRACFG=y
-# CONFIG_MTK_PMIC_WRAP is not set
-CONFIG_MTK_SCPSYS=y
-CONFIG_MTK_TIMER=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NETFILTER=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_MEDIATEK_SOC=y
-CONFIG_NET_VENDOR_MEDIATEK=y
-CONFIG_NLS=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=2
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_MEDIATEK=y
-CONFIG_PCIE_PME=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-# CONFIG_PCI_V3_SEMI is not set
-CONFIG_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHY_MTK_TPHY=y
-# CONFIG_PHY_MTK_XSPHY is not set
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_MT7629=y
-CONFIG_PINCTRL_MTK_MOORE=y
-# CONFIG_PL310_ERRATA_588369 is not set
-# CONFIG_PL310_ERRATA_727915 is not set
-# CONFIG_PL310_ERRATA_753970 is not set
-# CONFIG_PL310_ERRATA_769419 is not set
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_GENERIC_DOMAINS=y
-CONFIG_PM_GENERIC_DOMAINS_OF=y
-CONFIG_PWM=y
-CONFIG_PWM_MEDIATEK=y
-# CONFIG_PWM_MTK_DISP is not set
-CONFIG_PWM_SYSFS=y
-CONFIG_RAS=y
-CONFIG_RATIONAL=y
-CONFIG_RCU_NEED_SEGCBLIST=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_REFCOUNT_FULL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SCSI=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_MT6577=y
-CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SG_POOL=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-# CONFIG_SPI_MT65XX is not set
-CONFIG_SPI_MTK_SNFI=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SRCU=y
-CONFIG_STACKTRACE=y
-# CONFIG_SWAP is not set
-CONFIG_SWCONFIG=y
-CONFIG_SWPHY=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_THUMB2_KERNEL is not set
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_MTK=y
-# CONFIG_USB_XHCI_PLATFORM is not set
-CONFIG_USE_OF=y
-# CONFIG_VFP is not set
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
+++ /dev/null
-From acb69c6600c3df52f0b3610801f3fd44c4392333 Mon Sep 17 00:00:00 2001
-Message-Id: <acb69c6600c3df52f0b3610801f3fd44c4392333.1559210220.git.ryder.lee@mediatek.com>
-From: Ryder Lee <ryder.lee@mediatek.com>
-Date: Wed, 13 Mar 2019 16:42:15 +0800
-Subject: [PATCH] arm: dts: mediatek: add basic support for MT7629 SoC
-
-This adds basic support for MT7629 reference board.
-
-Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
----
- include/dt-bindings/reset/mt7629-resets.h | 71 ++++
- 4 files changed, 704 insertions(+)
- create mode 100644 include/dt-bindings/reset/mt7629-resets.h
-
---- /dev/null
-+++ b/include/dt-bindings/reset/mt7629-resets.h
-@@ -0,0 +1,71 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+/*
-+ * Copyright (C) 2019 MediaTek Inc.
-+ */
-+
-+#ifndef _DT_BINDINGS_RESET_CONTROLLER_MT7629
-+#define _DT_BINDINGS_RESET_CONTROLLER_MT7629
-+
-+/* INFRACFG resets */
-+#define MT7629_INFRA_EMI_MPU_RST 0
-+#define MT7629_INFRA_UART5_RST 2
-+#define MT7629_INFRA_CIRQ_EINT_RST 3
-+#define MT7629_INFRA_APXGPT_RST 4
-+#define MT7629_INFRA_SCPSYS_RST 5
-+#define MT7629_INFRA_KP_RST 6
-+#define MT7629_INFRA_SPI1_RST 7
-+#define MT7629_INFRA_SPI4_RST 8
-+#define MT7629_INFRA_SYSTIMER_RST 9
-+#define MT7629_INFRA_IRRX_RST 10
-+#define MT7629_INFRA_AO_BUS_RST 16
-+#define MT7629_INFRA_EMI_RST 32
-+#define MT7629_INFRA_APMIXED_RST 35
-+#define MT7629_INFRA_MIPI_RST 36
-+#define MT7629_INFRA_TRNG_RST 37
-+#define MT7629_INFRA_SYSCIRQ_RST 38
-+#define MT7629_INFRA_MIPI_CSI_RST 39
-+#define MT7629_INFRA_GCE_FAXI_RST 40
-+#define MT7629_INFRA_I2C_SRAM_RST 41
-+#define MT7629_INFRA_IOMMU_RST 47
-+
-+/* PERICFG resets */
-+#define MT7629_PERI_UART0_SW_RST 0
-+#define MT7629_PERI_UART1_SW_RST 1
-+#define MT7629_PERI_UART2_SW_RST 2
-+#define MT7629_PERI_BTIF_SW_RST 6
-+#define MT7629_PERI_PWN_SW_RST 8
-+#define MT7629_PERI_DMA_SW_RST 11
-+#define MT7629_PERI_NFI_SW_RST 14
-+#define MT7629_PERI_I2C0_SW_RST 22
-+#define MT7629_PERI_SPI0_SW_RST 33
-+#define MT7629_PERI_SPI1_SW_RST 34
-+#define MT7629_PERI_FLASHIF_SW_RST 36
-+
-+/* PCIe Subsystem resets */
-+#define MT7629_PCIE1_CORE_RST 19
-+#define MT7629_PCIE1_MMIO_RST 20
-+#define MT7629_PCIE1_HRST 21
-+#define MT7629_PCIE1_USER_RST 22
-+#define MT7629_PCIE1_PIPE_RST 23
-+#define MT7629_PCIE0_CORE_RST 27
-+#define MT7629_PCIE0_MMIO_RST 28
-+#define MT7629_PCIE0_HRST 29
-+#define MT7629_PCIE0_USER_RST 30
-+#define MT7629_PCIE0_PIPE_RST 31
-+
-+/* SSUSB Subsystem resets */
-+#define MT7629_SSUSB_PHY_PWR_RST 3
-+#define MT7629_SSUSB_MAC_PWR_RST 4
-+
-+/* ETH Subsystem resets */
-+#define MT7629_ETHSYS_SYS_RST 0
-+#define MT7629_ETHSYS_MCM_RST 2
-+#define MT7629_ETHSYS_HSDMA_RST 5
-+#define MT7629_ETHSYS_FE_RST 6
-+#define MT7629_ETHSYS_ESW_RST 16
-+#define MT7629_ETHSYS_GMAC_RST 23
-+#define MT7629_ETHSYS_EPHY_RST 24
-+#define MT7629_ETHSYS_CRYPTO_RST 29
-+#define MT7629_ETHSYS_PPE_RST 31
-+
-+#endif /* _DT_BINDINGS_RESET_CONTROLLER_MT7629 */
+++ /dev/null
---- a/drivers/net/ethernet/mediatek/Kconfig
-+++ b/drivers/net/ethernet/mediatek/Kconfig
-@@ -1,6 +1,6 @@
- config NET_VENDOR_MEDIATEK
- bool "MediaTek ethernet driver"
-- depends on ARCH_MEDIATEK
-+ depends on ARCH_MEDIATEK || RALINK
- ---help---
- If you have a Mediatek SoC with ethernet, say Y.
-
---- a/drivers/net/ethernet/mediatek/Makefile
-+++ b/drivers/net/ethernet/mediatek/Makefile
-@@ -2,4 +2,5 @@
- # Makefile for the Mediatek SoCs built-in ethernet macs
- #
-
--obj-$(CONFIG_NET_MEDIATEK_SOC) += mtk_eth_soc.o
-+obj-$(CONFIG_NET_MEDIATEK_SOC) += mtk_eth_soc.o mtk_sgmii.o \
-+ mtk_eth_path.o
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_path.c
-@@ -0,0 +1,333 @@
-+/*
-+ * Copyright (C) 2018 MediaTek Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Copyright (C) 2018 Sean Wang <sean.wang@mediatek.com>
-+ */
-+
-+#include <linux/phy.h>
-+#include <linux/regmap.h>
-+
-+#include "mtk_eth_soc.h"
-+
-+struct mtk_eth_muxc {
-+ int (*set_path)(struct mtk_eth *eth, int path);
-+};
-+
-+static const char * const mtk_eth_mux_name[] = {
-+ "mux_gdm1_to_gmac1_esw", "mux_gmac2_gmac0_to_gephy",
-+ "mux_u3_gmac2_to_qphy", "mux_gmac1_gmac2_to_sgmii_rgmii",
-+ "mux_gmac12_to_gephy_sgmii",
-+};
-+
-+static const char * const mtk_eth_path_name[] = {
-+ "gmac1_rgmii", "gmac1_trgmii", "gmac1_sgmii", "gmac2_rgmii",
-+ "gmac2_sgmii", "gmac2_gephy", "gdm1_esw",
-+};
-+
-+static int set_mux_gdm1_to_gmac1_esw(struct mtk_eth *eth, int path)
-+{
-+ u32 val, mask, set;
-+ bool updated = true;
-+
-+ switch (path) {
-+ case MTK_ETH_PATH_GMAC1_SGMII:
-+ mask = ~(u32)MTK_MUX_TO_ESW;
-+ set = 0;
-+ break;
-+ case MTK_ETH_PATH_GDM1_ESW:
-+ mask = ~(u32)MTK_MUX_TO_ESW;
-+ set = MTK_MUX_TO_ESW;
-+ break;
-+ default:
-+ updated = false;
-+ break;
-+ };
-+
-+ if (updated) {
-+ val = mtk_r32(eth, MTK_MAC_MISC);
-+ val = (val & mask) | set;
-+ mtk_w32(eth, val, MTK_MAC_MISC);
-+ }
-+
-+ dev_info(eth->dev, "path %s in %s updated = %d\n",
-+ mtk_eth_path_name[path], __func__, updated);
-+
-+ return 0;
-+}
-+
-+static int set_mux_gmac2_gmac0_to_gephy(struct mtk_eth *eth, int path)
-+{
-+ unsigned int val = 0;
-+ bool updated = true;
-+
-+ switch (path) {
-+ case MTK_ETH_PATH_GMAC2_GEPHY:
-+ val = ~(u32)GEPHY_MAC_SEL;
-+ break;
-+ default:
-+ updated = false;
-+ break;
-+ }
-+
-+ if (updated)
-+ regmap_update_bits(eth->infra, INFRA_MISC2, GEPHY_MAC_SEL, val);
-+
-+ dev_info(eth->dev, "path %s in %s updated = %d\n",
-+ mtk_eth_path_name[path], __func__, updated);
-+
-+ return 0;
-+}
-+
-+static int set_mux_u3_gmac2_to_qphy(struct mtk_eth *eth, int path)
-+{
-+ unsigned int val = 0;
-+ bool updated = true;
-+
-+ switch (path) {
-+ case MTK_ETH_PATH_GMAC2_SGMII:
-+ val = CO_QPHY_SEL;
-+ break;
-+ default:
-+ updated = false;
-+ break;
-+ }
-+
-+ if (updated)
-+ regmap_update_bits(eth->infra, INFRA_MISC2, CO_QPHY_SEL, val);
-+
-+ dev_info(eth->dev, "path %s in %s updated = %d\n",
-+ mtk_eth_path_name[path], __func__, updated);
-+
-+ return 0;
-+}
-+
-+static int set_mux_gmac1_gmac2_to_sgmii_rgmii(struct mtk_eth *eth, int path)
-+{
-+ unsigned int val = 0;
-+ bool updated = true;
-+
-+ switch (path) {
-+ case MTK_ETH_PATH_GMAC1_SGMII:
-+ val = SYSCFG0_SGMII_GMAC1;
-+ break;
-+ case MTK_ETH_PATH_GMAC2_SGMII:
-+ val = SYSCFG0_SGMII_GMAC2;
-+ break;
-+ case MTK_ETH_PATH_GMAC1_RGMII:
-+ case MTK_ETH_PATH_GMAC2_RGMII:
-+ regmap_read(eth->ethsys, ETHSYS_SYSCFG0, &val);
-+ val &= SYSCFG0_SGMII_MASK;
-+
-+ if ((path == MTK_GMAC1_RGMII && val == SYSCFG0_SGMII_GMAC1) ||
-+ (path == MTK_GMAC2_RGMII && val == SYSCFG0_SGMII_GMAC2))
-+ val = 0;
-+ else
-+ updated = false;
-+ break;
-+ default:
-+ updated = false;
-+ break;
-+ };
-+
-+ if (updated)
-+ regmap_update_bits(eth->ethsys, ETHSYS_SYSCFG0,
-+ SYSCFG0_SGMII_MASK, val);
-+
-+ dev_info(eth->dev, "path %s in %s updated = %d\n",
-+ mtk_eth_path_name[path], __func__, updated);
-+
-+ return 0;
-+}
-+
-+static int set_mux_gmac12_to_gephy_sgmii(struct mtk_eth *eth, int path)
-+{
-+ unsigned int val = 0;
-+ bool updated = true;
-+
-+ regmap_read(eth->ethsys, ETHSYS_SYSCFG0, &val);
-+
-+ switch (path) {
-+ case MTK_ETH_PATH_GMAC1_SGMII:
-+ val |= SYSCFG0_SGMII_GMAC1_V2;
-+ break;
-+ case MTK_ETH_PATH_GMAC2_GEPHY:
-+ val &= ~(u32)SYSCFG0_SGMII_GMAC2_V2;
-+ break;
-+ case MTK_ETH_PATH_GMAC2_SGMII:
-+ val |= SYSCFG0_SGMII_GMAC2_V2;
-+ break;
-+ default:
-+ updated = false;
-+ };
-+
-+ if (updated)
-+ regmap_update_bits(eth->ethsys, ETHSYS_SYSCFG0,
-+ SYSCFG0_SGMII_MASK, val);
-+
-+ if (!updated)
-+ dev_info(eth->dev, "path %s no needs updatiion in %s\n",
-+ mtk_eth_path_name[path], __func__);
-+
-+ dev_info(eth->dev, "path %s in %s updated = %d\n",
-+ mtk_eth_path_name[path], __func__, updated);
-+
-+ return 0;
-+}
-+
-+static const struct mtk_eth_muxc mtk_eth_muxc[] = {
-+ { .set_path = set_mux_gdm1_to_gmac1_esw, },
-+ { .set_path = set_mux_gmac2_gmac0_to_gephy, },
-+ { .set_path = set_mux_u3_gmac2_to_qphy, },
-+ { .set_path = set_mux_gmac1_gmac2_to_sgmii_rgmii, },
-+ { .set_path = set_mux_gmac12_to_gephy_sgmii, }
-+};
-+
-+static int mtk_eth_mux_setup(struct mtk_eth *eth, int path)
-+{
-+ int i, err = 0;
-+
-+ if (!MTK_HAS_CAPS(eth->soc->caps, MTK_PATH_BIT(path))) {
-+ dev_info(eth->dev, "path %s isn't support on the SoC\n",
-+ mtk_eth_path_name[path]);
-+ return -EINVAL;
-+ }
-+
-+ if (!MTK_HAS_CAPS(eth->soc->caps, MTK_MUX))
-+ return 0;
-+
-+ /* Setup MUX in path fabric */
-+ for (i = 0; i < MTK_ETH_MUX_MAX; i++) {
-+ if (MTK_HAS_CAPS(eth->soc->caps, MTK_MUX_BIT(i))) {
-+ err = mtk_eth_muxc[i].set_path(eth, path);
-+ if (err)
-+ goto out;
-+ } else {
-+ dev_info(eth->dev, "mux %s isn't present on the SoC\n",
-+ mtk_eth_mux_name[i]);
-+ }
-+ }
-+
-+out:
-+ return err;
-+}
-+
-+static int mtk_gmac_sgmii_path_setup(struct mtk_eth *eth, int mac_id)
-+{
-+ unsigned int val = 0;
-+ int sid, err, path;
-+
-+ path = (mac_id == 0) ? MTK_ETH_PATH_GMAC1_SGMII :
-+ MTK_ETH_PATH_GMAC2_SGMII;
-+
-+ /* Setup proper MUXes along the path */
-+ err = mtk_eth_mux_setup(eth, path);
-+ if (err)
-+ return err;
-+
-+ /* The path GMAC to SGMII will be enabled once the SGMIISYS is being
-+ * setup done.
-+ */
-+ regmap_read(eth->ethsys, ETHSYS_SYSCFG0, &val);
-+
-+ regmap_update_bits(eth->ethsys, ETHSYS_SYSCFG0,
-+ SYSCFG0_SGMII_MASK, ~(u32)SYSCFG0_SGMII_MASK);
-+
-+ /* Decide how GMAC and SGMIISYS be mapped */
-+ sid = (MTK_HAS_CAPS(eth->soc->caps, MTK_SHARED_SGMII)) ? 0 : mac_id;
-+
-+ /* Setup SGMIISYS with the determined property */
-+ if (MTK_HAS_FLAGS(eth->sgmii->flags[sid], MTK_SGMII_PHYSPEED_AN))
-+ err = mtk_sgmii_setup_mode_an(eth->sgmii, sid);
-+ else
-+ err = mtk_sgmii_setup_mode_force(eth->sgmii, sid);
-+
-+ if (err)
-+ return err;
-+
-+ regmap_update_bits(eth->ethsys, ETHSYS_SYSCFG0,
-+ SYSCFG0_SGMII_MASK, val);
-+
-+ return 0;
-+}
-+
-+static int mtk_gmac_gephy_path_setup(struct mtk_eth *eth, int mac_id)
-+{
-+ int err, path = 0;
-+
-+ if (mac_id == 1)
-+ path = MTK_ETH_PATH_GMAC2_GEPHY;
-+
-+ if (!path)
-+ return -EINVAL;
-+
-+ /* Setup proper MUXes along the path */
-+ err = mtk_eth_mux_setup(eth, path);
-+ if (err)
-+ return err;
-+
-+ return 0;
-+}
-+
-+static int mtk_gmac_rgmii_path_setup(struct mtk_eth *eth, int mac_id)
-+{
-+ int err, path;
-+
-+ path = (mac_id == 0) ? MTK_ETH_PATH_GMAC1_RGMII :
-+ MTK_ETH_PATH_GMAC2_RGMII;
-+
-+ /* Setup proper MUXes along the path */
-+ err = mtk_eth_mux_setup(eth, path);
-+ if (err)
-+ return err;
-+
-+ return 0;
-+}
-+
-+int mtk_setup_hw_path(struct mtk_eth *eth, int mac_id, int phymode)
-+{
-+ int err;
-+
-+ switch (phymode) {
-+ case PHY_INTERFACE_MODE_TRGMII:
-+ case PHY_INTERFACE_MODE_RGMII_TXID:
-+ case PHY_INTERFACE_MODE_RGMII_RXID:
-+ case PHY_INTERFACE_MODE_RGMII_ID:
-+ case PHY_INTERFACE_MODE_RGMII:
-+ case PHY_INTERFACE_MODE_MII:
-+ case PHY_INTERFACE_MODE_REVMII:
-+ case PHY_INTERFACE_MODE_RMII:
-+ if (MTK_HAS_CAPS(eth->soc->caps, MTK_RGMII)) {
-+ err = mtk_gmac_rgmii_path_setup(eth, mac_id);
-+ if (err)
-+ return err;
-+ }
-+ break;
-+ case PHY_INTERFACE_MODE_SGMII:
-+ if (MTK_HAS_CAPS(eth->soc->caps, MTK_SGMII)) {
-+ err = mtk_gmac_sgmii_path_setup(eth, mac_id);
-+ if (err)
-+ return err;
-+ }
-+ break;
-+ case PHY_INTERFACE_MODE_GMII:
-+ if (MTK_HAS_CAPS(eth->soc->caps, MTK_GEPHY)) {
-+ err = mtk_gmac_gephy_path_setup(eth, mac_id);
-+ if (err)
-+ return err;
-+ }
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ return 0;
-+}
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -23,6 +23,7 @@
- #include <linux/reset.h>
- #include <linux/tcp.h>
- #include <linux/interrupt.h>
-+#include <linux/mdio.h>
- #include <linux/pinctrl/devinfo.h>
-
- #include "mtk_eth_soc.h"
-@@ -54,8 +55,10 @@ static const struct mtk_ethtool_stats {
- };
-
- static const char * const mtk_clks_source_name[] = {
-- "ethif", "esw", "gp0", "gp1", "gp2", "trgpll", "sgmii_tx250m",
-- "sgmii_rx250m", "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii_ck", "eth2pll"
-+ "ethif", "sgmiitop", "esw", "gp0", "gp1", "gp2", "fe", "trgpll",
-+ "sgmii_tx250m", "sgmii_rx250m", "sgmii_cdr_ref", "sgmii_cdr_fb",
-+ "sgmii2_tx250m", "sgmii2_rx250m", "sgmii2_cdr_ref", "sgmii2_cdr_fb",
-+ "sgmii_ck", "eth2pll",
- };
-
- void mtk_w32(struct mtk_eth *eth, u32 val, unsigned reg)
-@@ -84,8 +87,8 @@ static int mtk_mdio_busy_wait(struct mtk
- return -1;
- }
-
--static u32 _mtk_mdio_write(struct mtk_eth *eth, u32 phy_addr,
-- u32 phy_register, u32 write_data)
-+u32 _mtk_mdio_write(struct mtk_eth *eth, u32 phy_addr,
-+ u32 phy_register, u32 write_data)
- {
- if (mtk_mdio_busy_wait(eth))
- return -1;
-@@ -103,7 +106,7 @@ static u32 _mtk_mdio_write(struct mtk_et
- return 0;
- }
-
--static u32 _mtk_mdio_read(struct mtk_eth *eth, int phy_addr, int phy_reg)
-+u32 _mtk_mdio_read(struct mtk_eth *eth, int phy_addr, int phy_reg)
- {
- u32 d;
-
-@@ -123,6 +126,34 @@ static u32 _mtk_mdio_read(struct mtk_eth
- return d;
- }
-
-+u32 mtk_cl45_ind_read(struct mtk_eth *eth, u32 port, u32 devad, u32 reg, u32 *data)
-+{
-+ mutex_lock(ð->mii_bus->mdio_lock);
-+
-+ _mtk_mdio_write(eth, port, MII_MMD_ACC_CTL_REG, devad);
-+ _mtk_mdio_write(eth, port, MII_MMD_ADDR_DATA_REG, reg);
-+ _mtk_mdio_write(eth, port, MII_MMD_ACC_CTL_REG, MMD_OP_MODE_DATA | devad);
-+ *data = _mtk_mdio_read(eth, port, MII_MMD_ADDR_DATA_REG);
-+
-+ mutex_unlock(ð->mii_bus->mdio_lock);
-+
-+ return 0;
-+}
-+
-+u32 mtk_cl45_ind_write(struct mtk_eth *eth, u32 port, u32 devad, u32 reg, u32 data)
-+{
-+ mutex_lock(ð->mii_bus->mdio_lock);
-+
-+ _mtk_mdio_write(eth, port, MII_MMD_ACC_CTL_REG, devad);
-+ _mtk_mdio_write(eth, port, MII_MMD_ADDR_DATA_REG, reg);
-+ _mtk_mdio_write(eth, port, MII_MMD_ACC_CTL_REG, MMD_OP_MODE_DATA | devad);
-+ _mtk_mdio_write(eth, port, MII_MMD_ADDR_DATA_REG, data);
-+
-+ mutex_unlock(ð->mii_bus->mdio_lock);
-+
-+ return 0;
-+}
-+
- static int mtk_mdio_write(struct mii_bus *bus, int phy_addr,
- int phy_reg, u16 val)
- {
-@@ -165,51 +196,12 @@ static void mtk_gmac0_rgmii_adjust(struc
- mtk_w32(eth, val, TRGMII_TCK_CTRL);
- }
-
--static void mtk_gmac_sgmii_hw_setup(struct mtk_eth *eth, int mac_id)
--{
-- u32 val;
--
-- /* Setup the link timer and QPHY power up inside SGMIISYS */
-- regmap_write(eth->sgmiisys, SGMSYS_PCS_LINK_TIMER,
-- SGMII_LINK_TIMER_DEFAULT);
--
-- regmap_read(eth->sgmiisys, SGMSYS_SGMII_MODE, &val);
-- val |= SGMII_REMOTE_FAULT_DIS;
-- regmap_write(eth->sgmiisys, SGMSYS_SGMII_MODE, val);
--
-- regmap_read(eth->sgmiisys, SGMSYS_PCS_CONTROL_1, &val);
-- val |= SGMII_AN_RESTART;
-- regmap_write(eth->sgmiisys, SGMSYS_PCS_CONTROL_1, val);
--
-- regmap_read(eth->sgmiisys, SGMSYS_QPHY_PWR_STATE_CTRL, &val);
-- val &= ~SGMII_PHYA_PWD;
-- regmap_write(eth->sgmiisys, SGMSYS_QPHY_PWR_STATE_CTRL, val);
--
-- /* Determine MUX for which GMAC uses the SGMII interface */
-- if (MTK_HAS_CAPS(eth->soc->caps, MTK_DUAL_GMAC_SHARED_SGMII)) {
-- regmap_read(eth->ethsys, ETHSYS_SYSCFG0, &val);
-- val &= ~SYSCFG0_SGMII_MASK;
-- val |= !mac_id ? SYSCFG0_SGMII_GMAC1 : SYSCFG0_SGMII_GMAC2;
-- regmap_write(eth->ethsys, ETHSYS_SYSCFG0, val);
--
-- dev_info(eth->dev, "setup shared sgmii for gmac=%d\n",
-- mac_id);
-- }
--
-- /* Setup the GMAC1 going through SGMII path when SoC also support
-- * ESW on GMAC1
-- */
-- if (MTK_HAS_CAPS(eth->soc->caps, MTK_GMAC1_ESW | MTK_GMAC1_SGMII) &&
-- !mac_id) {
-- mtk_w32(eth, 0, MTK_MAC_MISC);
-- dev_info(eth->dev, "setup gmac1 going through sgmii");
-- }
--}
--
- static void mtk_phy_link_adjust(struct net_device *dev)
- {
- struct mtk_mac *mac = netdev_priv(dev);
-+ struct mtk_eth *eth = mac->hw;
- u16 lcl_adv = 0, rmt_adv = 0;
-+ u32 lcl_eee = 0, rmt_eee = 0;
- u8 flowctrl;
- u32 mcr = MAC_MCR_MAX_RX_1536 | MAC_MCR_IPG_CFG |
- MAC_MCR_FORCE_MODE | MAC_MCR_TX_EN |
-@@ -229,7 +221,7 @@ static void mtk_phy_link_adjust(struct n
- };
-
- if (MTK_HAS_CAPS(mac->hw->soc->caps, MTK_GMAC1_TRGMII) &&
-- !mac->id && !mac->trgmii)
-+ !mac->id && !mac->trgmii)
- mtk_gmac0_rgmii_adjust(mac->hw, dev->phydev->speed);
-
- if (dev->phydev->link)
-@@ -259,7 +251,16 @@ static void mtk_phy_link_adjust(struct n
- flowctrl & FLOW_CTRL_RX ? "enabled" : "disabled",
- flowctrl & FLOW_CTRL_TX ? "enabled" : "disabled");
- }
-+ /*EEE capability*/
-+ mtk_cl45_ind_read(eth, 0, MDIO_MMD_AN, MDIO_AN_EEE_ADV, &lcl_eee);
-+ mtk_cl45_ind_read(eth, 0, MDIO_MMD_AN, MDIO_AN_EEE_LPABLE, &rmt_eee);
-+
-+ if ((lcl_eee & rmt_eee & MDIO_EEE_1000T) == MDIO_EEE_1000T)
-+ mcr |= MAC_MCR_MDIO_EEE_1000T;
-+ if ((lcl_eee & rmt_eee & MDIO_EEE_100TX) == MDIO_EEE_100TX)
-+ mcr |= MAC_MCR_MDIO_EEE_100TX;
-
-+ /*Setup MCR*/
- mtk_w32(mac->hw, mcr, MTK_MAC_MCR(mac->id));
-
- if (dev->phydev->link)
-@@ -290,10 +291,10 @@ static int mtk_phy_connect_node(struct m
- return -ENODEV;
- }
-
-- dev_info(eth->dev,
-- "connected mac %d to PHY at %s [uid=%08x, driver=%s]\n",
-- mac->id, phydev_name(phydev), phydev->phy_id,
-- phydev->drv->name);
-+ dev_info(eth->dev,
-+ "connected mac %d to PHY at %s [uid=%08x, driver=%s]\n",
-+ mac->id, phydev_name(phydev), phydev->phy_id,
-+ phydev->drv->name);
-
- return 0;
- }
-@@ -304,6 +305,7 @@ static int mtk_phy_connect(struct net_de
- struct mtk_eth *eth;
- struct device_node *np;
- u32 val;
-+ int err;
-
- eth = mac->hw;
- np = of_parse_phandle(mac->of_node, "phy-handle", 0);
-@@ -313,6 +315,10 @@ static int mtk_phy_connect(struct net_de
- if (!np)
- return -ENODEV;
-
-+ err = mtk_setup_hw_path(eth, mac->id, of_get_phy_mode(np));
-+ if (err)
-+ goto err_phy;
-+
- mac->ge_mode = 0;
- switch (of_get_phy_mode(np)) {
- case PHY_INTERFACE_MODE_TRGMII:
-@@ -323,10 +329,9 @@ static int mtk_phy_connect(struct net_de
- case PHY_INTERFACE_MODE_RGMII:
- break;
- case PHY_INTERFACE_MODE_SGMII:
-- if (MTK_HAS_CAPS(eth->soc->caps, MTK_SGMII))
-- mtk_gmac_sgmii_hw_setup(eth, mac->id);
- break;
- case PHY_INTERFACE_MODE_MII:
-+ case PHY_INTERFACE_MODE_GMII:
- mac->ge_mode = 1;
- break;
- case PHY_INTERFACE_MODE_REVMII:
-@@ -355,7 +360,7 @@ static int mtk_phy_connect(struct net_de
- dev->phydev->speed = 0;
- dev->phydev->duplex = 0;
-
-- if (of_phy_is_fixed_link(mac->of_node))
-+ if (!strncmp(dev->phydev->drv->name, "Generic", 7))
- dev->phydev->supported |=
- SUPPORTED_Pause | SUPPORTED_Asym_Pause;
-
-@@ -535,37 +540,37 @@ static void mtk_stats_update(struct mtk_
- }
-
- static void mtk_get_stats64(struct net_device *dev,
-- struct rtnl_link_stats64 *storage)
-+ struct rtnl_link_stats64 *storage)
- {
-- struct mtk_mac *mac = netdev_priv(dev);
-- struct mtk_hw_stats *hw_stats = mac->hw_stats;
-- unsigned int start;
--
-- if (netif_running(dev) && netif_device_present(dev)) {
-- if (spin_trylock_bh(&hw_stats->stats_lock)) {
-- mtk_stats_update_mac(mac);
-- spin_unlock_bh(&hw_stats->stats_lock);
-- }
-- }
--
-- do {
-- start = u64_stats_fetch_begin_irq(&hw_stats->syncp);
-- storage->rx_packets = hw_stats->rx_packets;
-- storage->tx_packets = hw_stats->tx_packets;
-- storage->rx_bytes = hw_stats->rx_bytes;
-- storage->tx_bytes = hw_stats->tx_bytes;
-- storage->collisions = hw_stats->tx_collisions;
-- storage->rx_length_errors = hw_stats->rx_short_errors +
-- hw_stats->rx_long_errors;
-- storage->rx_over_errors = hw_stats->rx_overflow;
-- storage->rx_crc_errors = hw_stats->rx_fcs_errors;
-- storage->rx_errors = hw_stats->rx_checksum_errors;
-- storage->tx_aborted_errors = hw_stats->tx_skip;
-- } while (u64_stats_fetch_retry_irq(&hw_stats->syncp, start));
--
-- storage->tx_errors = dev->stats.tx_errors;
-- storage->rx_dropped = dev->stats.rx_dropped;
-- storage->tx_dropped = dev->stats.tx_dropped;
-+ struct mtk_mac *mac = netdev_priv(dev);
-+ struct mtk_hw_stats *hw_stats = mac->hw_stats;
-+ unsigned int start;
-+
-+ if (netif_running(dev) && netif_device_present(dev)) {
-+ if (spin_trylock_bh(&hw_stats->stats_lock)) {
-+ mtk_stats_update_mac(mac);
-+ spin_unlock_bh(&hw_stats->stats_lock);
-+ }
-+ }
-+
-+ do {
-+ start = u64_stats_fetch_begin_irq(&hw_stats->syncp);
-+ storage->rx_packets = hw_stats->rx_packets;
-+ storage->tx_packets = hw_stats->tx_packets;
-+ storage->rx_bytes = hw_stats->rx_bytes;
-+ storage->tx_bytes = hw_stats->tx_bytes;
-+ storage->collisions = hw_stats->tx_collisions;
-+ storage->rx_length_errors = hw_stats->rx_short_errors +
-+ hw_stats->rx_long_errors;
-+ storage->rx_over_errors = hw_stats->rx_overflow;
-+ storage->rx_crc_errors = hw_stats->rx_fcs_errors;
-+ storage->rx_errors = hw_stats->rx_checksum_errors;
-+ storage->tx_aborted_errors = hw_stats->tx_skip;
-+ } while (u64_stats_fetch_retry_irq(&hw_stats->syncp, start));
-+
-+ storage->tx_errors = dev->stats.tx_errors;
-+ storage->rx_dropped = dev->stats.rx_dropped;
-+ storage->tx_dropped = dev->stats.tx_dropped;
- }
-
- static inline int mtk_max_frag_size(int mtu)
-@@ -605,10 +610,10 @@ static int mtk_init_fq_dma(struct mtk_et
- dma_addr_t dma_addr;
- int i;
-
-- eth->scratch_ring = dma_zalloc_coherent(eth->dev,
-- cnt * sizeof(struct mtk_tx_dma),
-- ð->phy_scratch_ring,
-- GFP_ATOMIC);
-+ eth->scratch_ring = dma_alloc_coherent(eth->dev,
-+ cnt * sizeof(struct mtk_tx_dma),
-+ ð->phy_scratch_ring,
-+ GFP_ATOMIC | __GFP_ZERO);
- if (unlikely(!eth->scratch_ring))
- return -ENOMEM;
-
-@@ -623,6 +628,7 @@ static int mtk_init_fq_dma(struct mtk_et
- if (unlikely(dma_mapping_error(eth->dev, dma_addr)))
- return -ENOMEM;
-
-+ memset(eth->scratch_ring, 0x0, sizeof(struct mtk_tx_dma) * cnt);
- phy_ring_tail = eth->phy_scratch_ring +
- (sizeof(struct mtk_tx_dma) * (cnt - 1));
-
-@@ -673,7 +679,7 @@ static void mtk_tx_unmap(struct mtk_eth
- }
- tx_buf->flags = 0;
- if (tx_buf->skb &&
-- (tx_buf->skb != (struct sk_buff *)MTK_DMA_DUMMY_DESC))
-+ (tx_buf->skb != (struct sk_buff *)MTK_DMA_DUMMY_DESC))
- dev_kfree_skb_any(tx_buf->skb);
- tx_buf->skb = NULL;
- }
-@@ -689,6 +695,7 @@ static int mtk_tx_map(struct sk_buff *sk
- unsigned int nr_frags;
- int i, n_desc = 1;
- u32 txd4 = 0, fport;
-+ u32 qid = 0;
-
- itxd = ring->next_free;
- if (itxd == ring->last_free)
-@@ -708,9 +715,10 @@ static int mtk_tx_map(struct sk_buff *sk
- if (skb->ip_summed == CHECKSUM_PARTIAL)
- txd4 |= TX_DMA_CHKSUM;
-
-- /* VLAN header offload */
-- if (skb_vlan_tag_present(skb))
-- txd4 |= TX_DMA_INS_VLAN | skb_vlan_tag_get(skb);
-+#if defined(CONFIG_NET_MEDIATEK_HW_QOS)
-+ qid = skb->mark & (MTK_QDMA_TX_MASK);
-+ qid += (!mac->id) ? (MTK_QDMA_TX_MASK + 1) : 0;
-+#endif
-
- mapped_addr = dma_map_single(eth->dev, skb->data,
- skb_headlen(skb), DMA_TO_DEVICE);
-@@ -727,6 +735,7 @@ static int mtk_tx_map(struct sk_buff *sk
- /* TX SG offload */
- txd = itxd;
- nr_frags = skb_shinfo(skb)->nr_frags;
-+
- for (i = 0; i < nr_frags; i++) {
- struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i];
- unsigned int offset = 0;
-@@ -753,10 +762,10 @@ static int mtk_tx_map(struct sk_buff *sk
- last_frag = true;
-
- WRITE_ONCE(txd->txd1, mapped_addr);
-- WRITE_ONCE(txd->txd3, (TX_DMA_SWC |
-+ WRITE_ONCE(txd->txd3, (TX_DMA_SWC | QID_LOW_BITS(qid) |
- TX_DMA_PLEN0(frag_map_size) |
- last_frag * TX_DMA_LS0));
-- WRITE_ONCE(txd->txd4, fport);
-+ WRITE_ONCE(txd->txd4, fport | QID_HIGH_BITS(qid));
-
- tx_buf = mtk_desc_to_tx_buf(ring, txd);
- memset(tx_buf, 0, sizeof(*tx_buf));
-@@ -775,9 +784,9 @@ static int mtk_tx_map(struct sk_buff *sk
- /* store skb to cleanup */
- itx_buf->skb = skb;
-
-- WRITE_ONCE(itxd->txd4, txd4);
- WRITE_ONCE(itxd->txd3, (TX_DMA_SWC | TX_DMA_PLEN0(skb_headlen(skb)) |
-- (!nr_frags * TX_DMA_LS0)));
-+ (!nr_frags * TX_DMA_LS0)) | QID_LOW_BITS(qid));
-+ WRITE_ONCE(itxd->txd4, txd4 | QID_HIGH_BITS(qid));
-
- netdev_sent_queue(dev, skb->len);
- skb_tx_timestamp(skb);
-@@ -922,7 +931,7 @@ drop:
- return NETDEV_TX_OK;
- }
-
--static struct mtk_rx_ring *mtk_get_rx_ring(struct mtk_eth *eth)
-+struct mtk_rx_ring *mtk_get_rx_ring(struct mtk_eth *eth)
- {
- int i;
- struct mtk_rx_ring *ring;
-@@ -991,10 +1000,24 @@ static int mtk_poll_rx(struct napi_struc
- break;
-
- /* find out which mac the packet come from. values start at 1 */
-+#if defined(CONFIG_NET_DSA)
-+ mac = (trxd.rxd4 >> 22) & 0x1;
-+ mac = (mac + 1) % 2;
-+#else
- mac = (trxd.rxd4 >> RX_DMA_FPORT_SHIFT) &
-- RX_DMA_FPORT_MASK;
-- mac--;
--
-+ RX_DMA_FPORT_MASK;
-+ /* From QDMA(5). This is a external interface case of HWNAT.
-+ * When the incoming frame comes from an external interface
-+ * rather than GMAC1/GMAC2, HWNAT driver sends the original
-+ * frame to PPE via PPD(ping pong device) for HWNAT RX
-+ * frame learning. After learning, PPE transmit the
-+ * original frame back to PPD again to run SW NAT path.
-+ */
-+ if (mac == 5)
-+ mac = 0;
-+ else
-+ mac--;
-+#endif
- if (unlikely(mac < 0 || mac >= MTK_MAC_COUNT ||
- !eth->netdev[mac]))
- goto release_desc;
-@@ -1044,6 +1067,7 @@ static int mtk_poll_rx(struct napi_struc
- RX_DMA_VID(trxd.rxd3))
- __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q),
- RX_DMA_VID(trxd.rxd3));
-+
- skb_record_rx_queue(skb, 0);
- napi_gro_receive(napi, skb);
-
-@@ -1128,7 +1152,7 @@ static int mtk_poll_tx(struct mtk_eth *e
- }
-
- if (mtk_queue_stopped(eth) &&
-- (atomic_read(&ring->free_count) > ring->thresh))
-+ (atomic_read(&ring->free_count) > ring->thresh))
- mtk_wake_queue(eth);
-
- return total;
-@@ -1220,11 +1244,14 @@ static int mtk_tx_alloc(struct mtk_eth *
- if (!ring->buf)
- goto no_tx_mem;
-
-- ring->dma = dma_zalloc_coherent(eth->dev, MTK_DMA_SIZE * sz,
-- &ring->phys, GFP_ATOMIC);
-+ ring->dma = dma_alloc_coherent(eth->dev,
-+ MTK_DMA_SIZE * sz,
-+ &ring->phys,
-+ GFP_ATOMIC | __GFP_ZERO);
- if (!ring->dma)
- goto no_tx_mem;
-
-+ memset(ring->dma, 0, MTK_DMA_SIZE * sz);
- for (i = 0; i < MTK_DMA_SIZE; i++) {
- int next = (i + 1) % MTK_DMA_SIZE;
- u32 next_ptr = ring->phys + next * sz;
-@@ -1317,9 +1344,10 @@ static int mtk_rx_alloc(struct mtk_eth *
- return -ENOMEM;
- }
-
-- ring->dma = dma_zalloc_coherent(eth->dev,
-- rx_dma_size * sizeof(*ring->dma),
-- &ring->phys, GFP_ATOMIC);
-+ ring->dma = dma_alloc_coherent(eth->dev,
-+ rx_dma_size * sizeof(*ring->dma),
-+ &ring->phys,
-+ GFP_ATOMIC | __GFP_ZERO);
- if (!ring->dma)
- return -ENOMEM;
-
-@@ -1516,8 +1544,8 @@ static int mtk_hwlro_add_ipaddr(struct n
- int hwlro_idx;
-
- if ((fsp->flow_type != TCP_V4_FLOW) ||
-- (!fsp->h_u.tcp_ip4_spec.ip4dst) ||
-- (fsp->location > 1))
-+ (!fsp->h_u.tcp_ip4_spec.ip4dst) ||
-+ (fsp->location > 1))
- return -EINVAL;
-
- mac->hwlro_ip[fsp->location] = htonl(fsp->h_u.tcp_ip4_spec.ip4dst);
-@@ -1744,6 +1772,34 @@ static void mtk_tx_timeout(struct net_de
- schedule_work(ð->pending_work);
- }
-
-+static irqreturn_t mtk_handle_irq_tx_rx(int irq, void *_eth)
-+{
-+ struct mtk_eth *eth = _eth;
-+ u32 tx_status, rx_status;
-+
-+ tx_status = mtk_r32(eth, MTK_QMTK_INT_STATUS);
-+
-+ if (tx_status & MTK_TX_DONE_INT) {
-+ if (likely(napi_schedule_prep(ð->tx_napi))) {
-+ mtk_tx_irq_disable(eth, MTK_TX_DONE_INT);
-+ __napi_schedule(ð->tx_napi);
-+ }
-+ mtk_w32(eth, tx_status, MTK_QMTK_INT_STATUS);
-+ }
-+
-+ rx_status = mtk_r32(eth, MTK_PDMA_INT_STATUS);
-+
-+ if (rx_status & MTK_RX_DONE_INT) {
-+ if (likely(napi_schedule_prep(ð->rx_napi))) {
-+ mtk_rx_irq_disable(eth, MTK_RX_DONE_INT);
-+ __napi_schedule(ð->rx_napi);
-+ }
-+ mtk_w32(eth, rx_status, MTK_PDMA_INT_STATUS);
-+ }
-+
-+ return IRQ_HANDLED;
-+}
-+
- static irqreturn_t mtk_handle_irq_rx(int irq, void *_eth)
- {
- struct mtk_eth *eth = _eth;
-@@ -1784,8 +1840,8 @@ static void mtk_poll_controller(struct n
-
- static int mtk_start_dma(struct mtk_eth *eth)
- {
-- u32 rx_2b_offset = (NET_IP_ALIGN == 2) ? MTK_RX_2B_OFFSET : 0;
- int err;
-+ u32 rx_2b_offet = (NET_IP_ALIGN == 2) ? MTK_RX_2B_OFFSET : 0;
-
- err = mtk_dma_init(eth);
- if (err) {
-@@ -1801,7 +1857,7 @@ static int mtk_start_dma(struct mtk_eth
- MTK_QDMA_GLO_CFG);
-
- mtk_w32(eth,
-- MTK_RX_DMA_EN | rx_2b_offset |
-+ MTK_RX_DMA_EN | rx_2b_offet |
- MTK_RX_BT_32DWORDS | MTK_MULTI_EN,
- MTK_PDMA_GLO_CFG);
-
-@@ -1814,7 +1870,7 @@ static int mtk_open(struct net_device *d
- struct mtk_eth *eth = mac->hw;
-
- /* we run 2 netdevs on the same dma ring so we only bring it up once */
-- if (!refcount_read(ð->dma_refcnt)) {
-+ if (!atomic_read(ð->dma_refcnt)) {
- int err = mtk_start_dma(eth);
-
- if (err)
-@@ -1824,10 +1880,8 @@ static int mtk_open(struct net_device *d
- napi_enable(ð->rx_napi);
- mtk_tx_irq_enable(eth, MTK_TX_DONE_INT);
- mtk_rx_irq_enable(eth, MTK_RX_DONE_INT);
-- refcount_set(ð->dma_refcnt, 1);
- }
-- else
-- refcount_inc(ð->dma_refcnt);
-+ atomic_inc(ð->dma_refcnt);
-
- phy_start(dev->phydev);
- netif_start_queue(dev);
-@@ -1867,7 +1921,7 @@ static int mtk_stop(struct net_device *d
- phy_stop(dev->phydev);
-
- /* only shutdown DMA if this is the last user */
-- if (!refcount_dec_and_test(ð->dma_refcnt))
-+ if (!atomic_dec_and_test(ð->dma_refcnt))
- return 0;
-
- mtk_tx_irq_disable(eth, MTK_TX_DONE_INT);
-@@ -1973,14 +2027,16 @@ static int mtk_hw_init(struct mtk_eth *e
- val = mtk_r32(eth, MTK_CDMQ_IG_CTRL);
- mtk_w32(eth, val | MTK_CDMQ_STAG_EN, MTK_CDMQ_IG_CTRL);
-
-- /* Enable RX VLan Offloading */
-- mtk_w32(eth, 1, MTK_CDMP_EG_CTRL);
-+ /* Disable RX VLan Offloading */
-+ mtk_w32(eth, 0, MTK_CDMP_EG_CTRL);
-+
-+#if defined(CONFIG_NET_DSA)
-+ mtk_w32(eth, 0x81000001, MTK_CDMP_IG_CTRL);
-+#endif
-
-- /* enable interrupt delay for RX */
-- mtk_w32(eth, MTK_PDMA_DELAY_RX_DELAY, MTK_PDMA_DELAY_INT);
-+ mtk_w32(eth, 0x8f0f8f0f, MTK_PDMA_DELAY_INT);
-+ mtk_w32(eth, 0x8f0f8f0f, MTK_QDMA_DELAY_INT);
-
-- /* disable delay and normal interrupt */
-- mtk_w32(eth, 0, MTK_QDMA_DELAY_INT);
- mtk_tx_irq_disable(eth, ~0);
- mtk_rx_irq_disable(eth, ~0);
- mtk_w32(eth, RST_GL_PSE, MTK_RST_GL);
-@@ -2172,27 +2228,27 @@ static int mtk_cleanup(struct mtk_eth *e
- }
-
- static int mtk_get_link_ksettings(struct net_device *ndev,
-- struct ethtool_link_ksettings *cmd)
-+ struct ethtool_link_ksettings *cmd)
- {
-- struct mtk_mac *mac = netdev_priv(ndev);
-+ struct mtk_mac *mac = netdev_priv(ndev);
-
-- if (unlikely(test_bit(MTK_RESETTING, &mac->hw->state)))
-- return -EBUSY;
-+ if (unlikely(test_bit(MTK_RESETTING, &mac->hw->state)))
-+ return -EBUSY;
-
-- phy_ethtool_ksettings_get(ndev->phydev, cmd);
-+ phy_ethtool_ksettings_get(ndev->phydev, cmd);
-
-- return 0;
-+ return 0;
- }
-
- static int mtk_set_link_ksettings(struct net_device *ndev,
-- const struct ethtool_link_ksettings *cmd)
-+ const struct ethtool_link_ksettings *cmd)
- {
-- struct mtk_mac *mac = netdev_priv(ndev);
-+ struct mtk_mac *mac = netdev_priv(ndev);
-
-- if (unlikely(test_bit(MTK_RESETTING, &mac->hw->state)))
-- return -EBUSY;
-+ if (unlikely(test_bit(MTK_RESETTING, &mac->hw->state)))
-+ return -EBUSY;
-
-- return phy_ethtool_ksettings_set(ndev->phydev, cmd);
-+ return phy_ethtool_ksettings_set(ndev->phydev, cmd);
- }
-
- static void mtk_get_drvinfo(struct net_device *dev,
-@@ -2355,8 +2411,8 @@ static int mtk_set_rxnfc(struct net_devi
- }
-
- static const struct ethtool_ops mtk_ethtool_ops = {
-- .get_link_ksettings = mtk_get_link_ksettings,
-- .set_link_ksettings = mtk_set_link_ksettings,
-+ .get_link_ksettings = mtk_get_link_ksettings,
-+ .set_link_ksettings = mtk_set_link_ksettings,
- .get_drvinfo = mtk_get_drvinfo,
- .get_msglevel = mtk_get_msglevel,
- .set_msglevel = mtk_set_msglevel,
-@@ -2366,7 +2422,7 @@ static const struct ethtool_ops mtk_etht
- .get_sset_count = mtk_get_sset_count,
- .get_ethtool_stats = mtk_get_ethtool_stats,
- .get_rxnfc = mtk_get_rxnfc,
-- .set_rxnfc = mtk_set_rxnfc,
-+ .set_rxnfc = mtk_set_rxnfc,
- };
-
- static const struct net_device_ops mtk_netdev_ops = {
-@@ -2463,6 +2519,7 @@ static int mtk_probe(struct platform_dev
- {
- struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- struct device_node *mac_np;
-+ const struct of_device_id *match;
- struct mtk_eth *eth;
- int err;
- int i;
-@@ -2471,7 +2528,8 @@ static int mtk_probe(struct platform_dev
- if (!eth)
- return -ENOMEM;
-
-- eth->soc = of_device_get_match_data(&pdev->dev);
-+ match = of_match_device(of_mtk_match, &pdev->dev);
-+ eth->soc = (struct mtk_soc_data *)match->data;
-
- eth->dev = &pdev->dev;
- eth->base = devm_ioremap_resource(&pdev->dev, res);
-@@ -2489,26 +2547,37 @@ static int mtk_probe(struct platform_dev
- return PTR_ERR(eth->ethsys);
- }
-
-- if (MTK_HAS_CAPS(eth->soc->caps, MTK_SGMII)) {
-- eth->sgmiisys =
-- syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
-- "mediatek,sgmiisys");
-- if (IS_ERR(eth->sgmiisys)) {
-- dev_err(&pdev->dev, "no sgmiisys regmap found\n");
-- return PTR_ERR(eth->sgmiisys);
-+ if (MTK_HAS_CAPS(eth->soc->caps, MTK_INFRA)) {
-+ eth->infra = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
-+ "mediatek,infracfg");
-+ if (IS_ERR(eth->infra)) {
-+ dev_info(&pdev->dev, "no ethsys regmap found\n");
-+ return PTR_ERR(eth->infra);
- }
- }
-
-+ if (MTK_HAS_CAPS(eth->soc->caps, MTK_SGMII)) {
-+ eth->sgmii = devm_kzalloc(eth->dev, sizeof(*eth->sgmii),
-+ GFP_KERNEL);
-+ if (!eth->sgmii)
-+ return -ENOMEM;
-+
-+ err = mtk_sgmii_init(eth->sgmii, pdev->dev.of_node,
-+ eth->soc->ana_rgc3);
-+ if (err)
-+ return err;
-+ }
-+
- if (eth->soc->required_pctl) {
- eth->pctl = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
- "mediatek,pctl");
- if (IS_ERR(eth->pctl)) {
-- dev_err(&pdev->dev, "no pctl regmap found\n");
-+ dev_info(&pdev->dev, "no pctl regmap found\n");
- return PTR_ERR(eth->pctl);
- }
- }
-
-- for (i = 0; i < 3; i++) {
-+ for (i = 0; i < eth->soc->irq_num; i++) {
- eth->irq[i] = platform_get_irq(pdev, i);
- if (eth->irq[i] < 0) {
- dev_err(&pdev->dev, "no IRQ%d resource found\n", i);
-@@ -2552,15 +2621,22 @@ static int mtk_probe(struct platform_dev
- goto err_deinit_hw;
- }
-
-- err = devm_request_irq(eth->dev, eth->irq[1], mtk_handle_irq_tx, 0,
-- dev_name(eth->dev), eth);
-- if (err)
-- goto err_free_dev;
-+ if (eth->soc->irq_num > 1) {
-+ err = devm_request_irq(eth->dev, eth->irq[1], mtk_handle_irq_tx, 0,
-+ dev_name(eth->dev), eth);
-+ if (err)
-+ goto err_free_dev;
-
-- err = devm_request_irq(eth->dev, eth->irq[2], mtk_handle_irq_rx, 0,
-- dev_name(eth->dev), eth);
-- if (err)
-- goto err_free_dev;
-+ err = devm_request_irq(eth->dev, eth->irq[2], mtk_handle_irq_rx, 0,
-+ dev_name(eth->dev), eth);
-+ if (err)
-+ goto err_free_dev;
-+ } else {
-+ err = devm_request_irq(eth->dev, eth->irq[0], mtk_handle_irq_tx_rx, 0,
-+ dev_name(eth->dev), eth);
-+ if (err)
-+ goto err_free_dev;
-+ }
-
- err = mtk_mdio_init(eth);
- if (err)
-@@ -2626,27 +2702,48 @@ static int mtk_remove(struct platform_de
- }
-
- static const struct mtk_soc_data mt2701_data = {
-- .caps = MTK_GMAC1_TRGMII | MTK_HWLRO,
-+ .caps = MT7623_CAPS | MTK_HWLRO,
- .required_clks = MT7623_CLKS_BITMAP,
- .required_pctl = true,
-+ .irq_num = 3,
- };
-
- static const struct mtk_soc_data mt7622_data = {
-- .caps = MTK_DUAL_GMAC_SHARED_SGMII | MTK_GMAC1_ESW | MTK_HWLRO,
-+ .ana_rgc3 = 0x2028,
-+ .caps = MT7622_CAPS | MTK_HWLRO,
- .required_clks = MT7622_CLKS_BITMAP,
- .required_pctl = false,
-+ .irq_num = 3,
- };
-
- static const struct mtk_soc_data mt7623_data = {
-- .caps = MTK_GMAC1_TRGMII | MTK_HWLRO,
-+ .caps = MT7623_CAPS | MTK_HWLRO,
- .required_clks = MT7623_CLKS_BITMAP,
- .required_pctl = true,
-+ .irq_num = 3,
-+};
-+
-+static const struct mtk_soc_data leopard_data = {
-+ .ana_rgc3 = 0x128,
-+ .caps = LEOPARD_CAPS | MTK_HWLRO,
-+ .required_clks = LEOPARD_CLKS_BITMAP,
-+ .required_pctl = false,
-+ .irq_num = 3,
-+};
-+
-+static const struct mtk_soc_data mt7621_data = {
-+ .caps = MT7621_CAPS,
-+ .required_clks = MT7621_CLKS_BITMAP,
-+ .required_pctl = false,
-+ .irq_num = 1,
- };
-
- const struct of_device_id of_mtk_match[] = {
- { .compatible = "mediatek,mt2701-eth", .data = &mt2701_data},
- { .compatible = "mediatek,mt7622-eth", .data = &mt7622_data},
- { .compatible = "mediatek,mt7623-eth", .data = &mt7623_data},
-+ { .compatible = "mediatek,mt7629-eth", .data = &leopard_data},
-+ { .compatible = "mediatek,mt7621-eth", .data = &mt7621_data},
- {},
- };
- MODULE_DEVICE_TABLE(of, of_mtk_match);
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
-@@ -15,13 +15,17 @@
- #ifndef MTK_ETH_H
- #define MTK_ETH_H
-
-+#include <linux/dma-mapping.h>
-+#include <linux/netdevice.h>
-+#include <linux/of_net.h>
-+#include <linux/u64_stats_sync.h>
- #include <linux/refcount.h>
-
- #define MTK_QDMA_PAGE_SIZE 2048
- #define MTK_MAX_RX_LENGTH 1536
- #define MTK_TX_DMA_BUF_LEN 0x3fff
--#define MTK_DMA_SIZE 256
--#define MTK_NAPI_WEIGHT 64
-+#define MTK_DMA_SIZE 2048
-+#define MTK_NAPI_WEIGHT 256
- #define MTK_MAC_COUNT 2
- #define MTK_RX_ETH_HLEN (VLAN_ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN)
- #define MTK_RX_HLEN (NET_SKB_PAD + MTK_RX_ETH_HLEN + NET_IP_ALIGN)
-@@ -36,8 +40,6 @@
- NETIF_MSG_TX_ERR)
- #define MTK_HW_FEATURES (NETIF_F_IP_CSUM | \
- NETIF_F_RXCSUM | \
-- NETIF_F_HW_VLAN_CTAG_TX | \
-- NETIF_F_HW_VLAN_CTAG_RX | \
- NETIF_F_SG | NETIF_F_TSO | \
- NETIF_F_TSO6 | \
- NETIF_F_IPV6_CSUM)
-@@ -76,6 +78,9 @@
- #define MTK_CDMQ_IG_CTRL 0x1400
- #define MTK_CDMQ_STAG_EN BIT(0)
-
-+/* CDMP Ingress Control Register */
-+#define MTK_CDMP_IG_CTRL 0x400
-+
- /* CDMP Exgress Control Register */
- #define MTK_CDMP_EG_CTRL 0x404
-
-@@ -225,8 +230,9 @@
- #define MTK_TX_DONE_INT1 BIT(1)
- #define MTK_TX_DONE_INT0 BIT(0)
- #define MTK_RX_DONE_INT MTK_RX_DONE_DLY
--#define MTK_TX_DONE_INT (MTK_TX_DONE_INT0 | MTK_TX_DONE_INT1 | \
-- MTK_TX_DONE_INT2 | MTK_TX_DONE_INT3)
-+#define MTK_TX_DONE_DLY BIT(28)
-+#define MTK_TX_DONE_INT MTK_TX_DONE_DLY
-+
-
- /* QDMA Interrupt grouping registers */
- #define MTK_QDMA_INT_GRP1 0x1a20
-@@ -267,6 +273,12 @@
- #define MTK_GDM1_TX_GBCNT 0x2400
- #define MTK_STAT_OFFSET 0x40
-
-+/* QDMA TX NUM */
-+#define MTK_QDMA_TX_NUM 16
-+#define MTK_QDMA_TX_MASK ((MTK_QDMA_TX_NUM / 2) - 1)
-+#define QID_LOW_BITS(x) ((x) & 0xf)
-+#define QID_HIGH_BITS(x) ((((x) >> 4) & 0x3) & GENMASK(21, 20))
-+
- /* QDMA descriptor txd4 */
- #define TX_DMA_CHKSUM (0x7 << 29)
- #define TX_DMA_TSO BIT(28)
-@@ -316,6 +328,8 @@
- #define MAC_MCR_RX_EN BIT(13)
- #define MAC_MCR_BACKOFF_EN BIT(9)
- #define MAC_MCR_BACKPR_EN BIT(8)
-+#define MAC_MCR_MDIO_EEE_1000T BIT(7)
-+#define MAC_MCR_MDIO_EEE_100TX BIT(6)
- #define MAC_MCR_FORCE_RX_FC BIT(5)
- #define MAC_MCR_FORCE_TX_FC BIT(4)
- #define MAC_MCR_SPEED_1000 BIT(3)
-@@ -368,9 +382,11 @@
- #define ETHSYS_SYSCFG0 0x14
- #define SYSCFG0_GE_MASK 0x3
- #define SYSCFG0_GE_MODE(x, y) (x << (12 + (y * 2)))
--#define SYSCFG0_SGMII_MASK (3 << 8)
--#define SYSCFG0_SGMII_GMAC1 ((2 << 8) & GENMASK(9, 8))
--#define SYSCFG0_SGMII_GMAC2 ((3 << 8) & GENMASK(9, 8))
-+#define SYSCFG0_SGMII_MASK GENMASK(9, 8)
-+#define SYSCFG0_SGMII_GMAC1 ((2 << 8) & SYSCFG0_SGMII_MASK)
-+#define SYSCFG0_SGMII_GMAC2 ((3 << 8) & SYSCFG0_SGMII_MASK)
-+#define SYSCFG0_SGMII_GMAC1_V2 BIT(9)
-+#define SYSCFG0_SGMII_GMAC2_V2 BIT(8)
-
- /* ethernet subsystem clock register */
- #define ETHSYS_CLKCFG0 0x2c
-@@ -398,6 +414,16 @@
- #define SGMSYS_QPHY_PWR_STATE_CTRL 0xe8
- #define SGMII_PHYA_PWD BIT(4)
-
-+/* Infrasys subsystem config registers */
-+#define INFRA_MISC2 0x70c
-+#define CO_QPHY_SEL BIT(0)
-+#define GEPHY_MAC_SEL BIT(1)
-+
-+/*MDIO control*/
-+#define MII_MMD_ACC_CTL_REG 0x0d
-+#define MII_MMD_ADDR_DATA_REG 0x0e
-+#define MMD_OP_MODE_DATA BIT(14)
-+
- struct mtk_rx_dma {
- unsigned int rxd1;
- unsigned int rxd2;
-@@ -462,15 +488,21 @@ enum mtk_tx_flags {
- */
- enum mtk_clks_map {
- MTK_CLK_ETHIF,
-+ MTK_CLK_SGMIITOP,
- MTK_CLK_ESW,
- MTK_CLK_GP0,
- MTK_CLK_GP1,
- MTK_CLK_GP2,
-+ MTK_CLK_FE,
- MTK_CLK_TRGPLL,
- MTK_CLK_SGMII_TX_250M,
- MTK_CLK_SGMII_RX_250M,
- MTK_CLK_SGMII_CDR_REF,
- MTK_CLK_SGMII_CDR_FB,
-+ MTK_CLK_SGMII2_TX_250M,
-+ MTK_CLK_SGMII2_RX_250M,
-+ MTK_CLK_SGMII2_CDR_REF,
-+ MTK_CLK_SGMII2_CDR_FB,
- MTK_CLK_SGMII_CK,
- MTK_CLK_ETH2PLL,
- MTK_CLK_MAX
-@@ -488,6 +520,22 @@ enum mtk_clks_map {
- BIT(MTK_CLK_SGMII_CDR_FB) | \
- BIT(MTK_CLK_SGMII_CK) | \
- BIT(MTK_CLK_ETH2PLL))
-+#define LEOPARD_CLKS_BITMAP (BIT(MTK_CLK_ETHIF) | BIT(MTK_CLK_ESW) | \
-+ BIT(MTK_CLK_GP0) | BIT(MTK_CLK_GP1) | \
-+ BIT(MTK_CLK_GP2) | BIT(MTK_CLK_FE) | \
-+ BIT(MTK_CLK_SGMII_TX_250M) | \
-+ BIT(MTK_CLK_SGMII_RX_250M) | \
-+ BIT(MTK_CLK_SGMII_CDR_REF) | \
-+ BIT(MTK_CLK_SGMII_CDR_FB) | \
-+ BIT(MTK_CLK_SGMII2_TX_250M) | \
-+ BIT(MTK_CLK_SGMII2_RX_250M) | \
-+ BIT(MTK_CLK_SGMII2_CDR_REF) | \
-+ BIT(MTK_CLK_SGMII2_CDR_FB) | \
-+ BIT(MTK_CLK_SGMII_CK) | \
-+ BIT(MTK_CLK_ETH2PLL) | BIT(MTK_CLK_SGMIITOP))
-+
-+#define MT7621_CLKS_BITMAP 0
-+
- enum mtk_dev_state {
- MTK_HW_INIT,
- MTK_RESETTING
-@@ -557,35 +605,149 @@ struct mtk_rx_ring {
- u32 crx_idx_reg;
- };
-
--#define MTK_TRGMII BIT(0)
--#define MTK_GMAC1_TRGMII (BIT(1) | MTK_TRGMII)
--#define MTK_ESW BIT(4)
--#define MTK_GMAC1_ESW (BIT(5) | MTK_ESW)
--#define MTK_SGMII BIT(8)
--#define MTK_GMAC1_SGMII (BIT(9) | MTK_SGMII)
--#define MTK_GMAC2_SGMII (BIT(10) | MTK_SGMII)
--#define MTK_DUAL_GMAC_SHARED_SGMII (BIT(11) | MTK_GMAC1_SGMII | \
-- MTK_GMAC2_SGMII)
-+enum mtk_eth_mux {
-+ MTK_ETH_MUX_GDM1_TO_GMAC1_ESW,
-+ MTK_ETH_MUX_GMAC2_GMAC0_TO_GEPHY,
-+ MTK_ETH_MUX_U3_GMAC2_TO_QPHY,
-+ MTK_ETH_MUX_GMAC1_GMAC2_TO_SGMII_RGMII,
-+ MTK_ETH_MUX_GMAC12_TO_GEPHY_SGMII,
-+ MTK_ETH_MUX_MAX,
-+};
-+
-+enum mtk_eth_path {
-+ MTK_ETH_PATH_GMAC1_RGMII,
-+ MTK_ETH_PATH_GMAC1_TRGMII,
-+ MTK_ETH_PATH_GMAC1_SGMII,
-+ MTK_ETH_PATH_GMAC2_RGMII,
-+ MTK_ETH_PATH_GMAC2_SGMII,
-+ MTK_ETH_PATH_GMAC2_GEPHY,
-+ MTK_ETH_PATH_GDM1_ESW,
-+ MTK_ETH_PATH_MAX,
-+};
-+
-+/* Capability for function group */
-+#define MTK_RGMII BIT(0)
-+#define MTK_TRGMII BIT(1)
-+#define MTK_SGMII BIT(2)
-+#define MTK_ESW BIT(3)
-+#define MTK_GEPHY BIT(4)
-+#define MTK_MUX BIT(5)
-+#define MTK_INFRA BIT(6)
-+#define MTK_SHARED_SGMII BIT(7)
-+
-+/* Capability for features on SoCs */
-+#define MTK_PATH_BIT(x) BIT((x) + 10)
-+
-+#define MTK_GMAC1_RGMII \
-+ (MTK_PATH_BIT(MTK_ETH_PATH_GMAC1_RGMII) | MTK_RGMII)
-+
-+#define MTK_GMAC1_TRGMII \
-+ (MTK_PATH_BIT(MTK_ETH_PATH_GMAC1_TRGMII) | MTK_TRGMII)
-+
-+#define MTK_GMAC1_SGMII \
-+ (MTK_PATH_BIT(MTK_ETH_PATH_GMAC1_SGMII) | MTK_SGMII)
-+
-+#define MTK_GMAC2_RGMII \
-+ (MTK_PATH_BIT(MTK_ETH_PATH_GMAC2_RGMII) | MTK_RGMII)
-+
-+#define MTK_GMAC2_SGMII \
-+ (MTK_PATH_BIT(MTK_ETH_PATH_GMAC2_SGMII) | MTK_SGMII)
-+
-+#define MTK_GMAC2_GEPHY \
-+ (MTK_PATH_BIT(MTK_ETH_PATH_GMAC2_GEPHY) | MTK_GEPHY)
-+
-+#define MTK_GDM1_ESW \
-+ (MTK_PATH_BIT(MTK_ETH_PATH_GDM1_ESW) | MTK_ESW)
-+
-+#define MTK_MUX_BIT(x) BIT((x) + 20)
-+
-+/* Capability for MUXes present on SoCs */
-+/* 0: GDM1 -> GMAC1, 1: GDM1 -> ESW */
-+#define MTK_MUX_GDM1_TO_GMAC1_ESW \
-+ (MTK_MUX_BIT(MTK_ETH_MUX_GDM1_TO_GMAC1_ESW) | MTK_MUX)
-+
-+/* 0: GMAC2 -> GEPHY, 1: GMAC0 -> GePHY */
-+#define MTK_MUX_GMAC2_GMAC0_TO_GEPHY \
-+ (MTK_MUX_BIT(MTK_ETH_MUX_GMAC2_GMAC0_TO_GEPHY) | MTK_MUX | MTK_INFRA)
-+
-+/* 0: U3 -> QPHY, 1: GMAC2 -> QPHY */
-+#define MTK_MUX_U3_GMAC2_TO_QPHY \
-+ (MTK_MUX_BIT(MTK_ETH_MUX_U3_GMAC2_TO_QPHY) | MTK_MUX | MTK_INFRA)
-+
-+/* 2: GMAC1 -> SGMII, 3: GMAC2 -> SGMII */
-+#define MTK_MUX_GMAC1_GMAC2_TO_SGMII_RGMII \
-+ (MTK_MUX_BIT(MTK_ETH_MUX_GMAC1_GMAC2_TO_SGMII_RGMII) | MTK_MUX | \
-+ MTK_SHARED_SGMII)
-+
-+/* 0: GMACx -> GEPHY, 1: GMACx -> SGMII where x is 1 or 2 */
-+#define MTK_MUX_GMAC12_TO_GEPHY_SGMII \
-+ (MTK_MUX_BIT(MTK_ETH_MUX_GMAC12_TO_GEPHY_SGMII) | MTK_MUX)
-+
- #define MTK_HWLRO BIT(12)
-+
- #define MTK_HAS_CAPS(caps, _x) (((caps) & (_x)) == (_x))
-
-+#define MT7622_CAPS (MTK_GMAC1_RGMII | MTK_GMAC1_SGMII | MTK_GMAC2_RGMII | \
-+ MTK_GMAC2_SGMII | MTK_GDM1_ESW | \
-+ MTK_MUX_GDM1_TO_GMAC1_ESW | \
-+ MTK_MUX_GMAC1_GMAC2_TO_SGMII_RGMII)
-+
-+#define MT7623_CAPS (MTK_GMAC1_RGMII | MTK_GMAC1_TRGMII | MTK_GMAC2_RGMII)
-+
-+#define LEOPARD_CAPS (MTK_GMAC1_SGMII | MTK_GMAC2_SGMII | MTK_GMAC2_GEPHY | \
-+ MTK_GDM1_ESW | MTK_MUX_GDM1_TO_GMAC1_ESW | \
-+ MTK_MUX_GMAC2_GMAC0_TO_GEPHY | \
-+ MTK_MUX_U3_GMAC2_TO_QPHY | \
-+ MTK_MUX_GMAC12_TO_GEPHY_SGMII)
-+
-+#define MT7621_CAPS (MTK_GMAC1_RGMII | MTK_GMAC1_TRGMII | MTK_GMAC2_RGMII)
-+
- /* struct mtk_eth_data - This is the structure holding all differences
- * among various plaforms
-+ * @ana_rgc3: The offset for register ANA_RGC3 related to
-+ * sgmiisys syscon
- * @caps Flags shown the extra capability for the SoC
- * @required_clks Flags shown the bitmap for required clocks on
- * the target SoC
- * @required_pctl A bool value to show whether the SoC requires
- * the extra setup for those pins used by GMAC.
-+ * @irq_num total eth irq num support in target SoC
- */
- struct mtk_soc_data {
-+ u32 ana_rgc3;
- u32 caps;
- u32 required_clks;
- bool required_pctl;
-+ u32 irq_num;
- };
-
- /* currently no SoC has more than 2 macs */
- #define MTK_MAX_DEVS 2
-
-+struct mtk_eth_debug {
-+ struct dentry *root;
-+};
-+
-+#define MTK_SGMII_PHYSPEED_AN BIT(31)
-+#define MTK_SGMII_PHYSPEED_MASK GENMASK(0, 2)
-+#define MTK_SGMII_PHYSPEED_1000 BIT(0)
-+#define MTK_SGMII_PHYSPEED_2500 BIT(1)
-+#define MTK_HAS_FLAGS(flags, _x) (((flags) & (_x)) == (_x))
-+
-+/* struct mtk_sgmii - This is the structure holding sgmii regmap and its
-+ * characteristics
-+ * @regmap: The register map pointing at the range used to setup
-+ * SGMII modes
-+ * @flags: The enum refers to which mode the sgmii wants to run on
-+ * @ana_rgc3: The offset refers to register ANA_RGC3 related to regmap
-+ */
-+
-+struct mtk_sgmii {
-+ struct regmap *regmap[MTK_MAX_DEVS];
-+ u32 flags[MTK_MAX_DEVS];
-+ u32 ana_rgc3;
-+};
-+
- /* struct mtk_eth - This is the main datasructure for holding the state
- * of the driver
- * @dev: The device pointer
-@@ -601,14 +763,15 @@ struct mtk_soc_data {
- * @msg_enable: Ethtool msg level
- * @ethsys: The register map pointing at the range used to setup
- * MII modes
-- * @sgmiisys: The register map pointing at the range used to setup
-- * SGMII modes
-+ * @infra: The register map pointing at the range used to setup
-+ * SGMII and GePHY path
- * @pctl: The register map pointing at the range used to setup
- * GMAC port drive/slew values
- * @dma_refcnt: track how many netdevs are using the DMA engine
- * @tx_ring: Pointer to the memory holding info about the TX ring
- * @rx_ring: Pointer to the memory holding info about the RX ring
-- * @rx_ring_qdma: Pointer to the memory holding info about the QDMA RX ring
-+ * @rx_ring_qdma: Pointer to the memory holding info about the QDMA RX
-+ * ring
- * @tx_napi: The TX NAPI struct
- * @rx_napi: The RX NAPI struct
- * @scratch_ring: Newer SoCs need memory for a second HW managed TX ring
-@@ -619,13 +782,16 @@ struct mtk_soc_data {
- * @pending_work: The workqueue used to reset the dma ring
- * @state: Initialization and runtime state of the device
- * @soc: Holding specific data among vaious SoCs
-+ * @debug: Holding specific data for mtk_eth_dbg usage.
- */
-
- struct mtk_eth {
- struct device *dev;
- void __iomem *base;
- spinlock_t page_lock;
-+ /* spin_lock for enable/disable tx irq critial section */
- spinlock_t tx_irq_lock;
-+ /* spin_lock for enable/disable rx irq critial section */
- spinlock_t rx_irq_lock;
- struct net_device dummy_dev;
- struct net_device *netdev[MTK_MAX_DEVS];
-@@ -634,10 +800,11 @@ struct mtk_eth {
- u32 msg_enable;
- unsigned long sysclk;
- struct regmap *ethsys;
-- struct regmap *sgmiisys;
-+ struct regmap *infra;
-+ struct mtk_sgmii *sgmii;
- struct regmap *pctl;
- bool hwlro;
-- refcount_t dma_refcnt;
-+ atomic_t dma_refcnt;
- struct mtk_tx_ring tx_ring;
- struct mtk_rx_ring rx_ring[MTK_MAX_RX_RING_NUM];
- struct mtk_rx_ring rx_ring_qdma;
-@@ -653,6 +820,7 @@ struct mtk_eth {
- unsigned long state;
-
- const struct mtk_soc_data *soc;
-+ struct mtk_eth_debug debug;
- };
-
- /* struct mtk_mac - the structure that holds the info about the MACs of the
-@@ -664,6 +832,7 @@ struct mtk_eth {
- * @hw_stats: Packet statistics counter
- * @trgmii Indicate if the MAC uses TRGMII connected to internal
- switch
-+ * @phy_dev: The attached PHY if available
- */
- struct mtk_mac {
- int id;
-@@ -674,6 +843,7 @@ struct mtk_mac {
- __be32 hwlro_ip[MTK_MAX_LRO_IP_CNT];
- int hwlro_ip_cnt;
- bool trgmii;
-+ struct phy_device *phy_dev;
- };
-
- /* the struct describing the SoC. these are declared in the soc_xyz.c files */
-@@ -685,4 +855,10 @@ void mtk_stats_update_mac(struct mtk_mac
- void mtk_w32(struct mtk_eth *eth, u32 val, unsigned reg);
- u32 mtk_r32(struct mtk_eth *eth, unsigned reg);
-
-+int mtk_sgmii_init(struct mtk_sgmii *ss, struct device_node *np,
-+ u32 ana_rgc3);
-+int mtk_sgmii_setup_mode_an(struct mtk_sgmii *ss, int id);
-+int mtk_sgmii_setup_mode_force(struct mtk_sgmii *ss, int id);
-+int mtk_setup_hw_path(struct mtk_eth *eth, int mac_id, int phymode);
-+
- #endif /* MTK_ETH_H */
---- /dev/null
-+++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
-@@ -0,0 +1,114 @@
-+/*
-+ * Copyright (C) 2018 MediaTek Inc.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; version 2 of the License
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Copyright (C) 2018 Sean Wang <sean.wang@mediatek.com>
-+ */
-+
-+#include <linux/mfd/syscon.h>
-+#include <linux/of.h>
-+#include <linux/regmap.h>
-+
-+#include "mtk_eth_soc.h"
-+
-+int mtk_sgmii_init(struct mtk_sgmii *ss, struct device_node *r, u32 ana_rgc3)
-+{
-+ struct device_node *np;
-+ const char *str;
-+ int i, err;
-+
-+ ss->ana_rgc3 = ana_rgc3;
-+
-+ for (i = 0; i < MTK_MAX_DEVS; i++) {
-+ np = of_parse_phandle(r, "mediatek,sgmiisys", i);
-+ if (!np)
-+ break;
-+
-+ ss->regmap[i] = syscon_node_to_regmap(np);
-+ if (IS_ERR(ss->regmap[i]))
-+ return PTR_ERR(ss->regmap[i]);
-+
-+ err = of_property_read_string(np, "mediatek,physpeed", &str);
-+ if (err)
-+ return err;
-+
-+ if (!strcmp(str, "2500"))
-+ pr_info("sean debug physpeed = 2500\n");
-+
-+ if (!strcmp(str, "2500"))
-+ ss->flags[i] |= MTK_SGMII_PHYSPEED_2500;
-+ else if (!strcmp(str, "1000"))
-+ ss->flags[i] |= MTK_SGMII_PHYSPEED_1000;
-+ else if (!strcmp(str, "auto"))
-+ ss->flags[i] |= MTK_SGMII_PHYSPEED_AN;
-+ else
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+int mtk_sgmii_setup_mode_an(struct mtk_sgmii *ss, int id)
-+{
-+ unsigned int val;
-+
-+ if (!ss->regmap[id])
-+ return -EINVAL;
-+
-+ /* Setup the link timer and QPHY power up inside SGMIISYS */
-+ regmap_write(ss->regmap[id], SGMSYS_PCS_LINK_TIMER,
-+ SGMII_LINK_TIMER_DEFAULT);
-+
-+ regmap_read(ss->regmap[id], SGMSYS_SGMII_MODE, &val);
-+ val |= SGMII_REMOTE_FAULT_DIS;
-+ regmap_write(ss->regmap[id], SGMSYS_SGMII_MODE, val);
-+
-+ regmap_read(ss->regmap[id], SGMSYS_PCS_CONTROL_1, &val);
-+ val |= SGMII_AN_RESTART;
-+ regmap_write(ss->regmap[id], SGMSYS_PCS_CONTROL_1, val);
-+
-+ regmap_read(ss->regmap[id], SGMSYS_QPHY_PWR_STATE_CTRL, &val);
-+ val &= ~SGMII_PHYA_PWD;
-+ regmap_write(ss->regmap[id], SGMSYS_QPHY_PWR_STATE_CTRL, val);
-+
-+ return 0;
-+}
-+
-+int mtk_sgmii_setup_mode_force(struct mtk_sgmii *ss, int id)
-+{
-+ unsigned int val;
-+ int mode;
-+
-+ if (!ss->regmap[id])
-+ return -EINVAL;
-+
-+ regmap_read(ss->regmap[id], ss->ana_rgc3, &val);
-+ val &= ~GENMASK(2, 3);
-+ mode = ss->flags[id] & MTK_SGMII_PHYSPEED_MASK;
-+ val |= (mode == MTK_SGMII_PHYSPEED_1000) ? 0 : BIT(2);
-+ regmap_write(ss->regmap[id], ss->ana_rgc3, val);
-+
-+ /* disable SGMII AN */
-+ regmap_read(ss->regmap[id], SGMSYS_PCS_CONTROL_1, &val);
-+ val &= ~BIT(12);
-+ regmap_write(ss->regmap[id], SGMSYS_PCS_CONTROL_1, val);
-+
-+ /* SGMII force mode setting */
-+ val = 0x31120019;
-+ regmap_write(ss->regmap[id], SGMSYS_SGMII_MODE, val);
-+
-+ /* Release PHYA power down state */
-+ regmap_read(ss->regmap[id], SGMSYS_QPHY_PWR_STATE_CTRL, &val);
-+ val &= ~SGMII_PHYA_PWD;
-+ regmap_write(ss->regmap[id], SGMSYS_QPHY_PWR_STATE_CTRL, val);
-+
-+ return 0;
-+}
+++ /dev/null
-From 2663146427cedb9d7582cfa481d5d5611fb3138a Mon Sep 17 00:00:00 2001
-From: Ryder Lee <ryder.lee@mediatek.com>
-Date: Tue, 29 Jan 2019 12:28:48 +0800
-Subject: [PATCH] Revert "ARM: mediatek: add MT7623a smp bringup code"
-
-This reverts commit 3b99ab7deca1e5f4229b4bdecd005d71e22cfc60.
-
-The compatible "mediatek,mt7623a" is useless, so remove it.
-
-Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- arch/arm/mach-mediatek/mediatek.c | 2 --
- arch/arm/mach-mediatek/platsmp.c | 1 -
- 2 files changed, 3 deletions(-)
-
---- a/arch/arm/mach-mediatek/mediatek.c
-+++ b/arch/arm/mach-mediatek/mediatek.c
-@@ -30,7 +30,6 @@ static void __init mediatek_timer_init(v
-
- if (of_machine_is_compatible("mediatek,mt6589") ||
- of_machine_is_compatible("mediatek,mt7623") ||
-- of_machine_is_compatible("mediatek,mt7623a") ||
- of_machine_is_compatible("mediatek,mt8135") ||
- of_machine_is_compatible("mediatek,mt8127")) {
- /* turn on GPT6 which ungates arch timer clocks */
-@@ -50,7 +49,6 @@ static const char * const mediatek_board
- "mediatek,mt6589",
- "mediatek,mt6592",
- "mediatek,mt7623",
-- "mediatek,mt7623a",
- "mediatek,mt8127",
- "mediatek,mt8135",
- NULL,
---- a/arch/arm/mach-mediatek/platsmp.c
-+++ b/arch/arm/mach-mediatek/platsmp.c
-@@ -60,7 +60,6 @@ static const struct of_device_id mtk_tz_
- static const struct of_device_id mtk_smp_boot_infos[] __initconst = {
- { .compatible = "mediatek,mt6589", .data = &mtk_mt6589_boot },
- { .compatible = "mediatek,mt7623", .data = &mtk_mt7623_boot },
-- { .compatible = "mediatek,mt7623a", .data = &mtk_mt7623_boot },
- {},
- };
-
+++ /dev/null
---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -999,11 +999,6 @@ static int mtk_poll_rx(struct napi_struc
- if (!(trxd.rxd2 & RX_DMA_DONE))
- break;
-
-- /* find out which mac the packet come from. values start at 1 */
--#if defined(CONFIG_NET_DSA)
-- mac = (trxd.rxd4 >> 22) & 0x1;
-- mac = (mac + 1) % 2;
--#else
- mac = (trxd.rxd4 >> RX_DMA_FPORT_SHIFT) &
- RX_DMA_FPORT_MASK;
- /* From QDMA(5). This is a external interface case of HWNAT.
-@@ -1017,7 +1012,7 @@ static int mtk_poll_rx(struct napi_struc
- mac = 0;
- else
- mac--;
--#endif
-+
- if (unlikely(mac < 0 || mac >= MTK_MAC_COUNT ||
- !eth->netdev[mac]))
- goto release_desc;
-@@ -2030,10 +2025,6 @@ static int mtk_hw_init(struct mtk_eth *e
- /* Disable RX VLan Offloading */
- mtk_w32(eth, 0, MTK_CDMP_EG_CTRL);
-
--#if defined(CONFIG_NET_DSA)
-- mtk_w32(eth, 0x81000001, MTK_CDMP_IG_CTRL);
--#endif
--
- mtk_w32(eth, 0x8f0f8f0f, MTK_PDMA_DELAY_INT);
- mtk_w32(eth, 0x8f0f8f0f, MTK_QDMA_DELAY_INT);
-
+++ /dev/null
-From a43379dddf1ba14b6a9d50d95175117bbdf52ed2 Mon Sep 17 00:00:00 2001
-From: Ryder Lee <ryder.lee@mediatek.com>
-Date: Tue, 29 Jan 2019 12:31:18 +0800
-Subject: [PATCH] arm: mediatek: add MT7629 smp bring up code
-
-Add support for booting secondary CPUs on MT7629.
-
-Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- arch/arm/mach-mediatek/Kconfig | 4 ++++
- arch/arm/mach-mediatek/mediatek.c | 1 +
- arch/arm/mach-mediatek/platsmp.c | 1 +
- 3 files changed, 6 insertions(+)
-
---- a/arch/arm/mach-mediatek/Kconfig
-+++ b/arch/arm/mach-mediatek/Kconfig
-@@ -26,6 +26,10 @@ config MACH_MT7623
- bool "MediaTek MT7623 SoCs support"
- default ARCH_MEDIATEK
-
-+config MACH_MT7629
-+ bool "MediaTek MT7629 SoCs support"
-+ default ARCH_MEDIATEK
-+
- config MACH_MT8127
- bool "MediaTek MT8127 SoCs support"
- default ARCH_MEDIATEK
---- a/arch/arm/mach-mediatek/mediatek.c
-+++ b/arch/arm/mach-mediatek/mediatek.c
-@@ -49,6 +49,7 @@ static const char * const mediatek_board
- "mediatek,mt6589",
- "mediatek,mt6592",
- "mediatek,mt7623",
-+ "mediatek,mt7629",
- "mediatek,mt8127",
- "mediatek,mt8135",
- NULL,
---- a/arch/arm/mach-mediatek/platsmp.c
-+++ b/arch/arm/mach-mediatek/platsmp.c
-@@ -60,6 +60,7 @@ static const struct of_device_id mtk_tz_
- static const struct of_device_id mtk_smp_boot_infos[] __initconst = {
- { .compatible = "mediatek,mt6589", .data = &mtk_mt6589_boot },
- { .compatible = "mediatek,mt7623", .data = &mtk_mt7623_boot },
-+ { .compatible = "mediatek,mt7629", .data = &mtk_mt7623_boot },
- {},
- };
-
+++ /dev/null
---- a/drivers/net/phy/mtk/mt753x/Makefile
-+++ b/drivers/net/phy/mtk/mt753x/Makefile
-@@ -8,4 +8,4 @@ mt753x-$(CONFIG_SWCONFIG) += mt753x_swco
-
- mt753x-y += mt753x_mdio.o mt7530.o mt7531.o \
- mt753x_common.o mt753x_vlan.o \
-- mt753x_nl.o
-+ mt753x_nl.o mt753x_phy.o
---- a/drivers/net/phy/mtk/mt753x/mt7531.c
-+++ b/drivers/net/phy/mtk/mt753x/mt7531.c
-@@ -585,6 +585,27 @@ static void mt7531_core_pll_setup(struct
-
- static int mt7531_internal_phy_calibration(struct gsw_mt753x *gsw)
- {
-+ u32 i, val;
-+ int ret;
-+
-+ dev_info(gsw->dev,">>>>>>>>>>>>>>>>>>>>>>>>>>>>> START CALIBRATION:\n");
-+
-+ /* gphy value from sw path */
-+ val = gsw->mmd_read(gsw, 0, PHY_DEV1F, PHY_DEV1F_REG_403);
-+ val |= GBE_EFUSE_SETTING;
-+ gsw->mmd_write(gsw, 0, PHY_DEV1F, PHY_DEV1F_REG_403, val);
-+
-+ for (i = 0; i < 5; i++) {
-+ dev_info(gsw->dev, "-------- gephy-calbration (port:%d) --------\n",
-+ i);
-+ ret = mt753x_phy_calibration(gsw, i);
-+
-+ /* set Auto-negotiation with giga extension. */
-+ gsw->mii_write(gsw, i, 0, 0x1340);
-+ if (ret)
-+ return ret;
-+ }
-+
- return 0;
- }
-
---- a/drivers/net/phy/mtk/mt753x/mt753x.h
-+++ b/drivers/net/phy/mtk/mt753x/mt753x.h
-@@ -129,6 +129,8 @@ void mt753x_mmd_ind_write(struct gsw_mt7
- void mt753x_irq_worker(struct work_struct *work);
- void mt753x_irq_enable(struct gsw_mt753x *gsw);
-
-+int mt753x_phy_calibration(struct gsw_mt753x *gsw, u8 phyaddr);
-+
- /* MDIO Indirect Access Registers */
- #define MII_MMD_ACC_CTL_REG 0x0d
- #define MMD_CMD_S 14
---- /dev/null
-+++ b/drivers/net/phy/mtk/mt753x/mt753x_phy.c
-@@ -0,0 +1,1061 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+/*
-+ * Common part for MediaTek MT753x gigabit switch
-+ *
-+ * Copyright (C) 2018 MediaTek Inc. All Rights Reserved.
-+ *
-+ * Author: Weijie Gao <weijie.gao@mediatek.com>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/delay.h>
-+
-+#include "mt753x.h"
-+#include "mt753x_regs.h"
-+#include "mt753x_phy.h"
-+
-+u32 tc_phy_read_dev_reg(struct gsw_mt753x *gsw, u32 port_num, u32 dev_addr, u32 reg_addr)
-+{
-+ u32 phy_val;
-+ phy_val = gsw->mmd_read(gsw, port_num, dev_addr, reg_addr);
-+
-+ //printk("switch phy cl45 r %d 0x%x 0x%x = %x\n",port_num, dev_addr, reg_addr, phy_val);
-+ //switch_phy_read_cl45(port_num, dev_addr, reg_addr, &phy_val);
-+ return phy_val;
-+}
-+
-+void tc_phy_write_dev_reg(struct gsw_mt753x *gsw, u32 port_num, u32 dev_addr, u32 reg_addr, u32 write_data)
-+{
-+ u32 phy_val;
-+ gsw->mmd_write(gsw, port_num, dev_addr, reg_addr, write_data);
-+ phy_val = gsw->mmd_read(gsw, port_num, dev_addr, reg_addr);
-+ //printk("switch phy cl45 w %d 0x%x 0x%x 0x%x --> read back 0x%x\n",port_num, dev_addr, reg_addr, write_data, phy_val);
-+ //switch_phy_write_cl45(port_num, dev_addr, reg_addr, write_data);
-+}
-+
-+void switch_phy_write(struct gsw_mt753x *gsw, u32 port_num, u32 reg_addr, u32 write_data){
-+ gsw->mii_write(gsw, port_num, reg_addr, write_data);
-+}
-+
-+u32 switch_phy_read(struct gsw_mt753x *gsw, u32 port_num, u32 reg_addr){
-+ return gsw->mii_read(gsw, port_num, reg_addr);
-+}
-+
-+const u8 MT753x_ZCAL_TO_R50ohm_GE_TBL_100[64] = {
-+ 127, 127, 127, 127, 127, 127, 127, 127,
-+ 127, 127, 127, 127, 127, 123, 122, 117,
-+ 115, 112, 103, 100, 98, 87, 85, 83,
-+ 81, 72, 70, 68, 66, 64, 55, 53,
-+ 52, 50, 49, 48, 38, 36, 35, 34,
-+ 33, 32, 22, 21, 20, 19, 18, 17,
-+ 16, 7, 6, 5, 4, 3, 2, 1,
-+ 0, 0, 0, 0, 0, 0, 0, 0
-+};
-+
-+const u8 MT753x_TX_OFFSET_TBL[64] = {
-+ 0x1f, 0x1e, 0x1d, 0x1c, 0x1b, 0x1a, 0x19, 0x18,
-+ 0x17, 0x16, 0x15, 0x14, 0x13, 0x12, 0x11, 0x10,
-+ 0xf, 0xe, 0xd, 0xc, 0xb, 0xa, 0x9, 0x8,
-+ 0x7, 0x6, 0x5, 0x4, 0x3, 0x2, 0x1, 0x0,
-+ 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27,
-+ 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f,
-+ 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37,
-+ 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f
-+};
-+
-+u8 ge_cal_flag;
-+
-+u8 all_ge_ana_cal_wait(struct gsw_mt753x *gsw, u32 delay, u32 phyaddr) // for EN7512
-+{
-+ u8 all_ana_cal_status;
-+ u32 cnt, tmp_1e_17c;
-+ //tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x017c, 0x0001); // da_calin_flag pull high
-+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x17c, 0x0001);
-+ //printk("delay = %d\n", delay);
-+
-+ cnt = 10000;
-+ do {
-+ udelay(delay);
-+ cnt--;
-+ all_ana_cal_status = tc_phy_read_dev_reg(gsw, PHY0, 0x1e, 0x17b) & 0x1;
-+
-+ } while ((all_ana_cal_status == 0) && (cnt != 0));
-+
-+
-+ if(all_ana_cal_status == 1) {
-+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x17c, 0);
-+ return all_ana_cal_status;
-+ } else {
-+ tmp_1e_17c = tc_phy_read_dev_reg(gsw, PHY0, 0x1e, 0x17c);
-+ if ((tmp_1e_17c & 0x1) != 1) {
-+ pr_info("FIRST MDC/MDIO write error\n");
-+ pr_info("FIRST 1e_17c = %x\n", tc_phy_read_dev_reg(gsw, PHY0, 0x1e, 0x17c));
-+
-+ }
-+ printk("re-K again\n");
-+
-+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x17c, 0);
-+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x17c, 0x0001);
-+ cnt = 10000;
-+ do {
-+ udelay(delay);
-+ cnt--;
-+ tmp_1e_17c = tc_phy_read_dev_reg(gsw, PHY0, 0x1e, 0x17c);
-+ if ((tmp_1e_17c & 0x1) != 1) {
-+ pr_info("SECOND MDC/MDIO write error\n");
-+ pr_info("SECOND 1e_17c = %x\n", tc_phy_read_dev_reg(gsw, PHY0, 0x1e, 0x17c));
-+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x17c, 0x0001);
-+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x17c, 0x0001);
-+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x17c, 0x0001);
-+ }
-+ } while ((cnt != 0) && (tmp_1e_17c == 0));
-+
-+ cnt = 10000;
-+ do {
-+ udelay(delay);
-+ cnt--;
-+ all_ana_cal_status = tc_phy_read_dev_reg(gsw, PHY0, 0x1e, 0x17b) & 0x1;
-+
-+ } while ((all_ana_cal_status == 0) && (cnt != 0));
-+
-+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x17c, 0);
-+ }
-+
-+ if(all_ana_cal_status == 0){
-+ pr_info("!!!!!!!!!!!! dev1Eh_reg17b ERROR\n");
-+ }
-+
-+ return all_ana_cal_status;
-+}
-+
-+
-+
-+
-+int ge_cal_rext(struct gsw_mt753x *gsw, u8 phyaddr, u32 delay)
-+{
-+ u8 rg_zcal_ctrl, all_ana_cal_status;
-+ u16 ad_cal_comp_out_init;
-+ u16 dev1e_e0_ana_cal_r5;
-+ int calibration_polarity;
-+ u8 cnt = 0;
-+ u16 dev1e_17a_tmp, dev1e_e0_tmp;
-+
-+ /* *** Iext/Rext Cal start ************ */
-+ all_ana_cal_status = ANACAL_INIT;
-+ /* analog calibration enable, Rext calibration enable */
-+ /* 1e_db[12]:rg_cal_ckinv, [8]:rg_ana_calen, [4]:rg_rext_calen, [0]:rg_zcalen_a */
-+ /* 1e_dc[0]:rg_txvos_calen */
-+ /* 1e_e1[4]:rg_cal_refsel(0:1.2V) */
-+ //tc_phy_write_dev_reg(phyaddr, 0x1e, 0x00db, 0x1110)
-+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00db, 0x1110);
-+ //tc_phy_write_dev_reg(phyaddr, 0x1e, 0x00dc, 0x0000);
-+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00dc, 0);
-+ //tc_phy_write_dev_reg(phyaddr, 0x1e, 0x00e1, 0x0000);
-+ //tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00e1, 0x10);
-+
-+ rg_zcal_ctrl = 0x20;/* start with 0 dB */
-+ dev1e_e0_ana_cal_r5 = tc_phy_read_dev_reg(gsw, PHY0, 0x1e, 0xe0); // get default value
-+ /* 1e_e0[5:0]:rg_zcal_ctrl */
-+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0xe0, rg_zcal_ctrl);
-+ all_ana_cal_status = all_ge_ana_cal_wait(gsw, delay, phyaddr);/* delay 20 usec */
-+
-+ if (all_ana_cal_status == 0) {
-+ all_ana_cal_status = ANACAL_ERROR;
-+ printk(" GE Rext AnaCal ERROR init! \r\n");
-+ return -1;
-+ }
-+ /* 1e_17a[8]:ad_cal_comp_out */
-+ ad_cal_comp_out_init = (tc_phy_read_dev_reg(gsw, PHY0, 0x1e, 0x017a) >> 8) & 0x1;
-+ if (ad_cal_comp_out_init == 1)
-+ calibration_polarity = -1;
-+ else /* ad_cal_comp_out_init == 0 */
-+ calibration_polarity = 1;
-+ cnt = 0;
-+ while (all_ana_cal_status < ANACAL_ERROR) {
-+ cnt++;
-+ rg_zcal_ctrl += calibration_polarity;
-+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0xe0, (rg_zcal_ctrl));
-+ all_ana_cal_status = all_ge_ana_cal_wait(gsw, delay, phyaddr); /* delay 20 usec */
-+ dev1e_17a_tmp = tc_phy_read_dev_reg(gsw, PHY0, 0x1e, 0x017a);
-+ if (all_ana_cal_status == 0) {
-+ all_ana_cal_status = ANACAL_ERROR;
-+ printk(" GE Rext AnaCal ERROR 2! \r\n");
-+ return -1;
-+ } else if (((dev1e_17a_tmp >> 8) & 0x1) != ad_cal_comp_out_init) {
-+ all_ana_cal_status = ANACAL_FINISH;
-+ //printk(" GE Rext AnaCal Done! (%d)(0x%x) \r\n", cnt, rg_zcal_ctrl);
-+ } else {
-+ dev1e_17a_tmp = tc_phy_read_dev_reg(gsw, PHY0, 0x1e, 0x017a);
-+ dev1e_e0_tmp = tc_phy_read_dev_reg(gsw, PHY0, 0x1e, 0xe0);
-+ if ((rg_zcal_ctrl == 0x3F) || (rg_zcal_ctrl == 0x00)) {
-+ all_ana_cal_status = ANACAL_SATURATION; /* need to FT(IC fail?) */
-+ printk(" GE Rext AnaCal Saturation! \r\n");
-+ rg_zcal_ctrl = 0x20; /* 0 dB */
-+ }
-+ }
-+ }
-+
-+ if (all_ana_cal_status == ANACAL_ERROR) {
-+ rg_zcal_ctrl = 0x20; /* 0 dB */
-+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00e0, (dev1e_e0_ana_cal_r5 | rg_zcal_ctrl));
-+ } else if(all_ana_cal_status == ANACAL_FINISH){
-+ //tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00e0, (dev1e_e0_ana_cal_r5 | rg_zcal_ctrl));
-+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00e0, ((rg_zcal_ctrl << 8) | rg_zcal_ctrl));
-+ printk("0x1e-e0 = %x\n", tc_phy_read_dev_reg(gsw, PHY0, 0x1e, 0x00e0));
-+ /* **** 1f_115[2:0] = rg_zcal_ctrl[5:3] // Mog review */
-+ tc_phy_write_dev_reg(gsw, PHY0, 0x1f, 0x0115, ((rg_zcal_ctrl & 0x3f) >> 3));
-+ printk("0x1f-115 = %x\n", tc_phy_read_dev_reg(gsw, PHY0, 0x1f, 0x115));
-+ printk(" GE Rext AnaCal Done! (%d)(0x%x) \r\n", cnt, rg_zcal_ctrl);
-+ ge_cal_flag = 1;
-+ } else {
-+ printk("GE Rxet cal something wrong2\n");
-+ }
-+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00db, 0x0000);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00db, 0x0000);
-+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00dc, 0x0000);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dc, 0x0000);
-+}
-+
-+//-----------------------------------------------------------------
-+int ge_cal_r50(struct gsw_mt753x *gsw, u8 phyaddr, u32 delay)
-+{
-+ u8 rg_zcal_ctrl, all_ana_cal_status, calibration_pair;
-+ u16 ad_cal_comp_out_init;
-+ u16 dev1e_e0_ana_cal_r5;
-+ int calibration_polarity;
-+ u8 cnt = 0;
-+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00db, 0x1100); // 1e_db[12]:rg_cal_ckinv, [8]:rg_ana_calen, [4]:rg_rext_calen, [0]:rg_zcalen_a
-+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00dc, 0x0000); // 1e_dc[0]:rg_txvos_calen
-+
-+ for(calibration_pair = ANACAL_PAIR_A; calibration_pair <= ANACAL_PAIR_D; calibration_pair ++) {
-+ rg_zcal_ctrl = 0x20; // start with 0 dB
-+ dev1e_e0_ana_cal_r5 = (tc_phy_read_dev_reg(gsw, PHY0, 0x1e, 0x00e0) & (~0x003f));
-+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00e0, (dev1e_e0_ana_cal_r5 | rg_zcal_ctrl)); // 1e_e0[5:0]:rg_zcal_ctrl
-+ if(calibration_pair == ANACAL_PAIR_A)
-+ {
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00db, 0x1101); // 1e_db[12]:rg_cal_ckinv, [8]:rg_ana_calen, [4]:rg_rext_calen, [0]:rg_zcalen_a
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dc, 0x0000);
-+ //printk("R50 pair A 1e_db=%x 1e_db=%x\n", tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x00db), tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x00dc));
-+
-+ }
-+ else if(calibration_pair == ANACAL_PAIR_B)
-+ {
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00db, 0x1100); // 1e_db[12]:rg_cal_ckinv, [8]:rg_ana_calen, [4]:rg_rext_calen, [0]:rg_zcalen_a
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dc, 0x1000); // 1e_dc[12]:rg_zcalen_b
-+ //printk("R50 pair B 1e_db=%x 1e_db=%x\n", tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x00db),tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x00dc));
-+
-+ }
-+ else if(calibration_pair == ANACAL_PAIR_C)
-+ {
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00db, 0x1100); // 1e_db[12]:rg_cal_ckinv, [8]:rg_ana_calen, [4]:rg_rext_calen, [0]:rg_zcalen_a
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dc, 0x0100); // 1e_dc[8]:rg_zcalen_c
-+ //printk("R50 pair C 1e_db=%x 1e_db=%x\n", tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x00db), tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x00dc));
-+
-+ }
-+ else // if(calibration_pair == ANACAL_PAIR_D)
-+ {
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00db, 0x1100); // 1e_db[12]:rg_cal_ckinv, [8]:rg_ana_calen, [4]:rg_rext_calen, [0]:rg_zcalen_a
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dc, 0x0010); // 1e_dc[4]:rg_zcalen_d
-+ //printk("R50 pair D 1e_db=%x 1e_db=%x\n", tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x00db), tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x00dc));
-+
-+ }
-+
-+ all_ana_cal_status = all_ge_ana_cal_wait(gsw, delay, phyaddr); // delay 20 usec
-+ if(all_ana_cal_status == 0)
-+ {
-+ all_ana_cal_status = ANACAL_ERROR;
-+ printk( "GE R50 AnaCal ERROR init! \r\n");
-+ return -1;
-+ }
-+
-+ ad_cal_comp_out_init = (tc_phy_read_dev_reg(gsw, PHY0, 0x1e, 0x017a)>>8) & 0x1; // 1e_17a[8]:ad_cal_comp_out
-+ if(ad_cal_comp_out_init == 1)
-+ calibration_polarity = -1;
-+ else
-+ calibration_polarity = 1;
-+
-+ cnt = 0;
-+ while(all_ana_cal_status < ANACAL_ERROR)
-+ {
-+ cnt ++;
-+ rg_zcal_ctrl += calibration_polarity;
-+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00e0, (dev1e_e0_ana_cal_r5 | rg_zcal_ctrl));
-+ all_ana_cal_status = all_ge_ana_cal_wait(gsw, delay, phyaddr); // delay 20 usec
-+
-+ if(all_ana_cal_status == 0)
-+ {
-+ all_ana_cal_status = ANACAL_ERROR;
-+ printk( " GE R50 AnaCal ERROR 2! \r\n");
-+ return -1;
-+ }
-+ else if(((tc_phy_read_dev_reg(gsw, PHY0, 0x1e, 0x017a)>>8)&0x1) != ad_cal_comp_out_init)
-+ {
-+ all_ana_cal_status = ANACAL_FINISH;
-+ }
-+ else {
-+ if((rg_zcal_ctrl == 0x3F)||(rg_zcal_ctrl == 0x00))
-+ {
-+ all_ana_cal_status = ANACAL_SATURATION; // need to FT
-+ printk( " GE R50 AnaCal Saturation! \r\n");
-+ }
-+ }
-+ }
-+
-+ if(all_ana_cal_status == ANACAL_ERROR) {
-+ rg_zcal_ctrl = 0x20; // 0 dB
-+ //tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00e0, (dev1e_e0_ana_cal_r5 | rg_zcal_ctrl));
-+ }
-+ else {
-+ rg_zcal_ctrl = MT753x_ZCAL_TO_R50ohm_GE_TBL_100[rg_zcal_ctrl - 9]; // wait Mog zcal/r50 mapping table
-+ printk( " GE R50 AnaCal Done! (%d) (0x%x)(0x%x) \r\n", cnt, rg_zcal_ctrl, (rg_zcal_ctrl|0x80));
-+ }
-+
-+ if(calibration_pair == ANACAL_PAIR_A) {
-+ ad_cal_comp_out_init = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0174) & (~0x7f00);
-+ //ad_cal_comp_out_init = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0174);
-+ //printk( " GE-a 1e_174(0x%x)(0x%x), 1e_175(0x%x) \r\n", tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0174), ad_cal_comp_out_init, tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0175));
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0174, (ad_cal_comp_out_init | (((rg_zcal_ctrl<<8)&0xff00) | 0x8000))); // 1e_174[15:8]
-+ //printk( " GE-a 1e_174(0x%x), 1e_175(0x%x) \r\n", tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0174), tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0175));
-+ }
-+ else if(calibration_pair == ANACAL_PAIR_B) {
-+ ad_cal_comp_out_init = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0174) & (~0x007f);
-+ //ad_cal_comp_out_init = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0174);
-+ //printk( " GE-b 1e_174(0x%x)(0x%x), 1e_175(0x%x) \r\n", tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0174), ad_cal_comp_out_init, tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0175));
-+
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0174, (ad_cal_comp_out_init | (((rg_zcal_ctrl<<0)&0x00ff) | 0x0080))); // 1e_174[7:0]
-+ //printk( " GE-b 1e_174(0x%x), 1e_175(0x%x) \r\n", tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0174), tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0175));
-+ }
-+ else if(calibration_pair == ANACAL_PAIR_C) {
-+ ad_cal_comp_out_init = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0175) & (~0x7f00);
-+ //ad_cal_comp_out_init = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0175);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0175, (ad_cal_comp_out_init | (((rg_zcal_ctrl<<8)&0xff00) | 0x8000))); // 1e_175[15:8]
-+ //printk( " GE-c 1e_174(0x%x), 1e_175(0x%x) \r\n", tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0174), tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0175));
-+ } else {// if(calibration_pair == ANACAL_PAIR_D)
-+ ad_cal_comp_out_init = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0175) & (~0x007f);
-+ //ad_cal_comp_out_init = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0175);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0175, (ad_cal_comp_out_init | (((rg_zcal_ctrl<<0)&0x00ff) | 0x0080))); // 1e_175[7:0]
-+ //printk( " GE-d 1e_174(0x%x), 1e_175(0x%x) \r\n", tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0174), tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0175));
-+ }
-+ //tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00e0, ((rg_zcal_ctrl<<8)|rg_zcal_ctrl));
-+ }
-+
-+ printk( " GE 1e_174(0x%x), 1e_175(0x%x) \r\n", tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0174), tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0175));
-+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00db, 0x0000);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00db, 0x0000);
-+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00dc, 0x0000);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dc, 0x0000);
-+}
-+
-+int ge_cal_tx_offset(struct gsw_mt753x *gsw, u8 phyaddr, u32 delay)
-+{
-+ u8 all_ana_cal_status, calibration_pair;
-+ u16 ad_cal_comp_out_init;
-+ int calibration_polarity, tx_offset_temp;
-+ u8 tx_offset_reg_shift, tabl_idx, i;
-+ u8 cnt = 0;
-+ u16 tx_offset_reg, reg_temp, cal_temp;
-+ //switch_phy_write(phyaddr, R0, 0x2100);//harry tmp
-+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00db, 0x0100); // 1e_db[12]:rg_cal_ckinv, [8]:rg_ana_calen, [4]:rg_rext_calen, [0]:rg_zcalen_a
-+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00dc, 0x0001); // 1e_dc[0]:rg_txvos_calen
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0096, 0x8000); // 1e_96[15]:bypass_tx_offset_cal, Hw bypass, Fw cal
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x003e, 0xf808); // 1e_3e
-+ for(i = 0; i <= 4; i++)
-+ tc_phy_write_dev_reg(gsw, i, 0x1e, 0x00dd, 0x0000);
-+ for(calibration_pair = ANACAL_PAIR_A; calibration_pair <= ANACAL_PAIR_D; calibration_pair ++)
-+ {
-+ tabl_idx = 31;
-+ tx_offset_temp = MT753x_TX_OFFSET_TBL[tabl_idx];
-+
-+ if(calibration_pair == ANACAL_PAIR_A) {
-+ //tc_phy_write_dev_reg(phyaddr, 0x1e, 0x145, 0x5010);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dd, 0x1000); // 1e_dd[12]:rg_txg_calen_a
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x017d, (0x8000|DAC_IN_0V)); // 1e_17d:dac_in0_a
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0181, (0x8000|DAC_IN_0V)); // 1e_181:dac_in1_a
-+ //printk("tx offset pairA 1e_dd = %x, 1e_17d=%x, 1e_181=%x\n", tc_phy_read_dev_reg(phyaddr, 0x1e, 0x00dd), tc_phy_read_dev_reg(phyaddr, 0x1e, 0x017d), tc_phy_read_dev_reg(phyaddr, 0x1e, 0x0181));
-+ reg_temp = (tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0172) & (~0x3f00));
-+ tx_offset_reg_shift = 8; // 1e_172[13:8]
-+ tx_offset_reg = 0x0172;
-+
-+ //tc_phy_write_dev_reg(phyaddr, 0x1e, tx_offset_reg, (reg_temp|(tx_offset_temp<<tx_offset_reg_shift)));
-+ } else if(calibration_pair == ANACAL_PAIR_B) {
-+ //tc_phy_write_dev_reg(phyaddr, 0x1e, 0x145, 0x5018);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dd, 0x0100); // 1e_dd[8]:rg_txg_calen_b
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x017e, (0x8000|DAC_IN_0V)); // 1e_17e:dac_in0_b
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0182, (0x8000|DAC_IN_0V)); // 1e_182:dac_in1_b
-+ //printk("tx offset pairB 1e_dd = %x, 1e_17d=%x, 1e_181=%x\n", tc_phy_read_dev_reg(phyaddr, 0x1e, 0x00dd), tc_phy_read_dev_reg(phyaddr, 0x1e, 0x017d), tc_phy_read_dev_reg(phyaddr, 0x1e, 0x0181));
-+ reg_temp = (tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0172) & (~0x003f));
-+ tx_offset_reg_shift = 0; // 1e_172[5:0]
-+ tx_offset_reg = 0x0172;
-+ //tc_phy_write_dev_reg(phyaddr, 0x1e, tx_offset_reg, (reg_temp|(tx_offset_temp<<tx_offset_reg_shift)));
-+ } else if(calibration_pair == ANACAL_PAIR_C) {
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dd, 0x0010); // 1e_dd[4]:rg_txg_calen_c
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x017f, (0x8000|DAC_IN_0V)); // 1e_17f:dac_in0_c
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0183, (0x8000|DAC_IN_0V)); // 1e_183:dac_in1_c
-+ reg_temp = (tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0173) & (~0x3f00));
-+ //printk("tx offset pairC 1e_dd = %x, 1e_17d=%x, 1e_181=%x\n", tc_phy_read_dev_reg(phyaddr, 0x1e, 0x00dd), tc_phy_read_dev_reg(phyaddr, 0x1e, 0x017d), tc_phy_read_dev_reg(phyaddr, 0x1e, 0x0181));
-+ tx_offset_reg_shift = 8; // 1e_173[13:8]
-+ tx_offset_reg = 0x0173;
-+ //tc_phy_write_dev_reg(phyaddr, 0x1e, tx_offset_reg, (reg_temp|(tx_offset_temp<<tx_offset_reg_shift)));
-+ } else {// if(calibration_pair == ANACAL_PAIR_D)
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dd, 0x0001); // 1e_dd[0]:rg_txg_calen_d
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0180, (0x8000|DAC_IN_0V)); // 1e_180:dac_in0_d
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0184, (0x8000|DAC_IN_0V)); // 1e_184:dac_in1_d
-+ //printk("tx offset pairD 1e_dd = %x, 1e_17d=%x, 1e_181=%x\n", tc_phy_read_dev_reg(phyaddr, 0x1e, 0x00dd), tc_phy_read_dev_reg(phyaddr, 0x1e, 0x017d), tc_phy_read_dev_reg(phyaddr, 0x1e, 0x0181));
-+ reg_temp = (tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x0173) & (~0x003f));
-+ tx_offset_reg_shift = 0; // 1e_173[5:0]
-+ tx_offset_reg = 0x0173;
-+ //tc_phy_write_dev_reg(phyaddr, 0x1e, tx_offset_reg, (reg_temp|(tx_offset_temp<<tx_offset_reg_shift)));
-+ }
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, tx_offset_reg, (reg_temp|(tx_offset_temp<<tx_offset_reg_shift))); // 1e_172, 1e_173
-+ all_ana_cal_status = all_ge_ana_cal_wait(gsw, delay, phyaddr); // delay 20 usec
-+ if(all_ana_cal_status == 0) {
-+ all_ana_cal_status = ANACAL_ERROR;
-+ printk( " GE Tx offset AnaCal ERROR init! \r\n");
-+ return -1;
-+ }
-+
-+ ad_cal_comp_out_init = (tc_phy_read_dev_reg(gsw, PHY0, 0x1e, 0x017a)>>8) & 0x1; // 1e_17a[8]:ad_cal_comp_out
-+ if(ad_cal_comp_out_init == 1)
-+ calibration_polarity = 1;
-+ else
-+ calibration_polarity = -1;
-+
-+ cnt = 0;
-+ //printk("TX offset cnt = %d, tabl_idx= %x, offset_val = %x\n", cnt, tabl_idx, MT753x_TX_OFFSET_TBL[tabl_idx]);
-+ while(all_ana_cal_status < ANACAL_ERROR) {
-+
-+ cnt ++;
-+ tabl_idx += calibration_polarity;
-+ //tx_offset_temp += calibration_polarity;
-+ //cal_temp = tx_offset_temp;
-+ cal_temp = MT753x_TX_OFFSET_TBL[tabl_idx];
-+ //printk("TX offset cnt = %d, tabl_idx= %x, offset_val = %x\n", cnt, tabl_idx, MT753x_TX_OFFSET_TBL[tabl_idx]);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, tx_offset_reg, (reg_temp|(cal_temp<<tx_offset_reg_shift)));
-+
-+ all_ana_cal_status = all_ge_ana_cal_wait(gsw, delay, phyaddr); // delay 20 usec
-+ if(all_ana_cal_status == 0) {
-+ all_ana_cal_status = ANACAL_ERROR;
-+ printk( " GE Tx offset AnaCal ERROR init 2! \r\n");
-+ return -1;
-+ } else if(((tc_phy_read_dev_reg(gsw, PHY0, 0x1e, 0x017a)>>8)&0x1) != ad_cal_comp_out_init) {
-+ all_ana_cal_status = ANACAL_FINISH;
-+ } else {
-+ if((tabl_idx == 0)||(tabl_idx == 0x3f)) {
-+ all_ana_cal_status = ANACAL_SATURATION; // need to FT
-+ printk( " GE Tx offset AnaCal Saturation! \r\n");
-+ }
-+ }
-+ }
-+
-+ if(all_ana_cal_status == ANACAL_ERROR) {
-+ tx_offset_temp = TX_AMP_OFFSET_0MV;
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, tx_offset_reg, (reg_temp|(tx_offset_temp<<tx_offset_reg_shift)));
-+ } else {
-+ printk( " GE Tx offset AnaCal Done! (pair-%d)(%d)(0x%x) 0x1e_%x=0x%x\n", calibration_pair, cnt, MT753x_TX_OFFSET_TBL[tabl_idx], tx_offset_reg, tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, tx_offset_reg));
-+ }
-+ }
-+
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x017d, 0x0000);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x017e, 0x0000);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x017f, 0x0000);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0180, 0x0000);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0181, 0x0000);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0182, 0x0000);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0183, 0x0000);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0184, 0x0000);
-+
-+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00db, 0x0000); // disable analog calibration circuit
-+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00dc, 0x0000); // disable Tx offset calibration circuit
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00db, 0x0000); // disable analog calibration circuit
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dc, 0x0000); // disable Tx offset calibration circuit
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x003e, 0x0000); // disable Tx VLD force mode
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dd, 0x0000); // disable Tx offset/amplitude calibration circuit
-+}
-+
-+int ge_cal_tx_amp(struct gsw_mt753x *gsw, u8 phyaddr, u32 delay)
-+{
-+ u8 all_ana_cal_status, calibration_pair, i;
-+ u16 ad_cal_comp_out_init;
-+ int calibration_polarity;
-+ u32 tx_amp_reg_shift;
-+ u16 reg_temp;
-+ u32 tx_amp_temp, tx_amp_reg, cnt=0, tx_amp_reg_100;
-+ u32 debug_tmp, reg_backup, reg_tmp;
-+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00db, 0x1100); // 1e_db[12]:rg_cal_ckinv, [8]:rg_ana_calen, [4]:rg_rext_calen, [0]:rg_zcalen_a
-+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00dc, 0x0001); // 1e_dc[0]:rg_txvos_calen
-+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00e1, 0x0010); // 1e_e1[4]:select 1V
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x003e, 0xf808); // 1e_3e:enable Tx VLD
-+
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x11, 0xff00);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1f, 0x27a, 0x33);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0xc9, 0xffff);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1f, 0x300, 0x4);
-+ for(i = 0; i <= 4; i++)
-+ tc_phy_write_dev_reg(gsw, i, 0x1e, 0x00dd, 0x0000);
-+ for(calibration_pair = ANACAL_PAIR_A; calibration_pair <= ANACAL_PAIR_D; calibration_pair ++) {
-+ tx_amp_temp = 0x20; // start with 0 dB
-+
-+ if(calibration_pair == ANACAL_PAIR_A) {
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dd, 0x1000); // 1e_dd[12]:tx_a amp calibration enable
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x017d, (0x8000|DAC_IN_2V)); // 1e_17d:dac_in0_a
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0181, (0x8000|DAC_IN_2V)); // 1e_181:dac_in1_a
-+ reg_temp = (tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x012) & (~0xfc00));
-+ tx_amp_reg_shift = 10; // 1e_12[15:10]
-+ tx_amp_reg = 0x12;
-+ tx_amp_reg_100 = 0x16;
-+ } else if(calibration_pair == ANACAL_PAIR_B) {
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dd, 0x0100); // 1e_dd[8]:tx_b amp calibration enable
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x017e, (0x8000|DAC_IN_2V)); // 1e_17e:dac_in0_b
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0182, (0x8000|DAC_IN_2V)); // 1e_182:dac_in1_b
-+ reg_temp = (tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x017) & (~0x3f00));
-+ tx_amp_reg_shift = 8; // 1e_17[13:8]
-+ tx_amp_reg = 0x17;
-+ tx_amp_reg_100 = 0x18;
-+ } else if(calibration_pair == ANACAL_PAIR_C) {
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dd, 0x0010); // 1e_dd[4]:tx_c amp calibration enable
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x017f, (0x8000|DAC_IN_2V)); // 1e_17f:dac_in0_c
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0183, (0x8000|DAC_IN_2V)); // 1e_183:dac_in1_c
-+ reg_temp = (tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x019) & (~0x3f00));
-+ tx_amp_reg_shift = 8; // 1e_19[13:8]
-+ tx_amp_reg = 0x19;
-+ tx_amp_reg_100 = 0x20;
-+ } else { //if(calibration_pair == ANACAL_PAIR_D)
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dd, 0x0001); // 1e_dd[0]:tx_d amp calibration enable
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0180, (0x8000|DAC_IN_2V)); // 1e_180:dac_in0_d
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0184, (0x8000|DAC_IN_2V)); // 1e_184:dac_in1_d
-+ reg_temp = (tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x021) & (~0x3f00));
-+ tx_amp_reg_shift = 8; // 1e_21[13:8]
-+ tx_amp_reg = 0x21;
-+ tx_amp_reg_100 = 0x22;
-+ }
-+ tc_phy_write_dev_reg( gsw, phyaddr, 0x1e, tx_amp_reg, (tx_amp_temp|(tx_amp_temp<<tx_amp_reg_shift))); // 1e_12, 1e_17, 1e_19, 1e_21
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg_100, (tx_amp_temp|(tx_amp_temp<<tx_amp_reg_shift)));
-+ all_ana_cal_status = all_ge_ana_cal_wait(gsw, delay, phyaddr); // delay 20 usec
-+ if(all_ana_cal_status == 0) {
-+ all_ana_cal_status = ANACAL_ERROR;
-+ printk( " GE Tx amp AnaCal ERROR init init! \r\n");
-+ return -1;
-+ }
-+
-+ ad_cal_comp_out_init = (tc_phy_read_dev_reg(gsw, PHY0, 0x1e, 0x017a)>>8) & 0x1; // 1e_17a[8]:ad_cal_comp_out
-+ if(ad_cal_comp_out_init == 1)
-+ calibration_polarity = -1;
-+ else
-+ calibration_polarity = 1;
-+
-+ cnt =0;
-+ while(all_ana_cal_status < ANACAL_ERROR) {
-+ cnt ++;
-+ tx_amp_temp += calibration_polarity;
-+ //printk("tx_amp : %x, 1e %x = %x\n", tx_amp_temp, tx_amp_reg, (reg_temp|(tx_amp_temp<<tx_amp_reg_shift)));
-+ tc_phy_write_dev_reg( gsw, phyaddr, 0x1e, tx_amp_reg, (tx_amp_temp|(tx_amp_temp<<tx_amp_reg_shift)));
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg_100, (tx_amp_temp|(tx_amp_temp<<tx_amp_reg_shift)));
-+ all_ana_cal_status = all_ge_ana_cal_wait(gsw, delay, phyaddr); // delay 20 usec
-+ if(all_ana_cal_status == 0) {
-+ all_ana_cal_status = ANACAL_ERROR;
-+ printk( " GE Tx amp AnaCal ERROR 2! \r\n");
-+ return -1;
-+ } else if(((tc_phy_read_dev_reg(gsw, PHY0, 0x1e, 0x017a)>>8)&0x1) != ad_cal_comp_out_init) {
-+ //printk("TX AMP ANACAL_FINISH\n");
-+ all_ana_cal_status = ANACAL_FINISH;
-+ if (phyaddr == 0) {
-+ if (calibration_pair == ANACAL_PAIR_A)
-+ tx_amp_temp = tx_amp_temp - 2;
-+ else if(calibration_pair == ANACAL_PAIR_B)
-+ tx_amp_temp = tx_amp_temp - 1;
-+ else if(calibration_pair == ANACAL_PAIR_C)
-+ tx_amp_temp = tx_amp_temp - 2;
-+ else if(calibration_pair == ANACAL_PAIR_D)
-+ tx_amp_temp = tx_amp_temp - 1;
-+ } else if (phyaddr == 1) {
-+ if (calibration_pair == ANACAL_PAIR_A)
-+ tx_amp_temp = tx_amp_temp - 1;
-+ else if(calibration_pair == ANACAL_PAIR_B)
-+ tx_amp_temp = tx_amp_temp ;
-+ else if(calibration_pair == ANACAL_PAIR_C)
-+ tx_amp_temp = tx_amp_temp - 1;
-+ else if(calibration_pair == ANACAL_PAIR_D)
-+ tx_amp_temp = tx_amp_temp - 1;
-+ } else if (phyaddr == 2) {
-+ if (calibration_pair == ANACAL_PAIR_A)
-+ tx_amp_temp = tx_amp_temp;
-+ else if(calibration_pair == ANACAL_PAIR_B)
-+ tx_amp_temp = tx_amp_temp - 1;
-+ else if(calibration_pair == ANACAL_PAIR_C)
-+ tx_amp_temp = tx_amp_temp;
-+ else if(calibration_pair == ANACAL_PAIR_D)
-+ tx_amp_temp = tx_amp_temp - 1;
-+ } else if (phyaddr == 3) {
-+ tx_amp_temp = tx_amp_temp;
-+ } else if (phyaddr == 4) {
-+ if (calibration_pair == ANACAL_PAIR_A)
-+ tx_amp_temp = tx_amp_temp;
-+ else if(calibration_pair == ANACAL_PAIR_B)
-+ tx_amp_temp = tx_amp_temp - 1;
-+ else if(calibration_pair == ANACAL_PAIR_C)
-+ tx_amp_temp = tx_amp_temp;
-+ else if(calibration_pair == ANACAL_PAIR_D)
-+ tx_amp_temp = tx_amp_temp;
-+ }
-+ reg_temp = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg)&(~0xff00);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg_100,(tx_amp_temp|((tx_amp_temp)<<tx_amp_reg_shift)));
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg, (tx_amp_temp|((tx_amp_temp)<<tx_amp_reg_shift)));
-+ if (phyaddr == 0) {
-+ if ((tx_amp_reg == 0x12) || (tx_amp_reg == 0x17)) {
-+ //printk("before : PORT[%d] 1e_%x = %x\n", phyaddr, tx_amp_reg, tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg));
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg, ((tx_amp_temp|((tx_amp_temp)<<tx_amp_reg_shift)) + 7));
-+ //printk("after : PORT[%d] 1e_%x = %x\n", phyaddr, tx_amp_reg, tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg));
-+ }
-+ if (tx_amp_reg_100 == 0x16) {
-+ //printk("before : PORT[%d] 1e_%x = %x\n", phyaddr, tx_amp_reg_100, tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg_100));
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg_100,(tx_amp_temp|((tx_amp_temp+1+4)<<tx_amp_reg_shift)));
-+ //printk("after : PORT[%d] 1e_%x = %x\n", phyaddr, tx_amp_reg_100, tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg_100));
-+ }
-+ if (tx_amp_reg_100 == 0x18) {
-+ //printk("before : PORT[%d] 1e_%x = %x\n", phyaddr, tx_amp_reg_100, tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg_100));
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg_100,(tx_amp_temp|((tx_amp_temp+4)<<tx_amp_reg_shift)));
-+ //printk("after : PORT[%d] 1e_%x = %x\n", phyaddr, tx_amp_reg_100, tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg_100));
-+ }
-+ } else if (phyaddr == 1) {
-+ if (tx_amp_reg == 0x12) {
-+ //printk("before : PORT[%d] 1e_%x = %x\n", phyaddr, tx_amp_reg, tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg));
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg, ((tx_amp_temp|((tx_amp_temp)<<tx_amp_reg_shift)) + 9));
-+ //printk("after : PORT[%d] 1e_%x = %x\n", phyaddr, tx_amp_reg, tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg));
-+ }
-+ if (tx_amp_reg == 0x17){
-+ //printk("before : PORT[%d] 1e_%x = %x\n", phyaddr, tx_amp_reg, tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg));
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg, ((tx_amp_temp|((tx_amp_temp)<<tx_amp_reg_shift)) + 7));
-+ //printk("after : PORT[%d] 1e_%x = %x\n", phyaddr, tx_amp_reg, tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg));
-+ }
-+ if (tx_amp_reg_100 == 0x16) {
-+ //printk("before : PORT[%d] 1e_%x = %x\n", phyaddr, tx_amp_reg_100, tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg_100));
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg_100,(tx_amp_temp|((tx_amp_temp+4)<<tx_amp_reg_shift)));
-+ //printk("after : PORT[%d] 1e_%x = %x\n", phyaddr, tx_amp_reg_100, tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg_100));
-+ }
-+ if (tx_amp_reg_100 == 0x18) {
-+ //printk("before : PORT[%d] 1e_%x = %x\n", phyaddr, tx_amp_reg_100, tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg_100));
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg_100,(tx_amp_temp|((tx_amp_temp-1+4)<<tx_amp_reg_shift)));
-+ //printk("after : PORT[%d] 1e_%x = %x\n", phyaddr, tx_amp_reg_100, tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg_100));
-+ }
-+ } else if (phyaddr == 2) {
-+ if ((tx_amp_reg == 0x12) || (tx_amp_reg == 0x17)) {
-+ //printk("before : PORT[%d] 1e_%x = %x\n", phyaddr, tx_amp_reg, tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg));
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg, ((tx_amp_temp|((tx_amp_temp)<<tx_amp_reg_shift)) + 6));
-+ //printk("after : PORT[%d] 1e_%x = %x\n", phyaddr, tx_amp_reg, tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg));
-+ }
-+ if ((tx_amp_reg_100 == 0x16) || (tx_amp_reg_100 == 0x18)) {
-+ //printk("before : PORT[%d] 1e_%x = %x\n", phyaddr, tx_amp_reg_100, tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg_100));
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg_100,(tx_amp_temp|((tx_amp_temp-1+4)<<tx_amp_reg_shift)));
-+ //printk("after : PORT[%d] 1e_%x = %x\n", phyaddr, tx_amp_reg_100, tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg_100));
-+ }
-+ } else if (phyaddr == 3) {
-+ if (tx_amp_reg == 0x12) {
-+ //printk("before : PORT[%d] 1e_%x = %x\n", phyaddr, tx_amp_reg, tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg));
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg, ((tx_amp_temp|((tx_amp_temp)<<tx_amp_reg_shift)) + 4));
-+ //printk("after : PORT[%d] 1e_%x = %x\n", phyaddr, tx_amp_reg, tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg));
-+ }
-+ if (tx_amp_reg == 0x17) {
-+ //printk("before : PORT[%d] 1e_%x = %x\n", phyaddr, tx_amp_reg, tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg));
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg, ((tx_amp_temp|((tx_amp_temp)<<tx_amp_reg_shift)) + 7));
-+ //printk("after : PORT[%d] 1e_%x = %x\n", phyaddr, tx_amp_reg, tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg));
-+ }
-+ if (tx_amp_reg_100 == 0x16) {
-+ //printk("before : PORT[%d] 1e_%x = %x\n", phyaddr, tx_amp_reg_100, tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg_100));
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg_100,(tx_amp_temp|((tx_amp_temp-2+4)<<tx_amp_reg_shift)));
-+ //printk("after : PORT[%d] 1e_%x = %x\n", phyaddr, tx_amp_reg_100, tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg_100));
-+ }
-+ if (tx_amp_reg_100 == 0x18) {
-+ //printk("before : PORT[%d] 1e_%x = %x\n", phyaddr, tx_amp_reg_100, tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg_100));
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg_100,(tx_amp_temp|((tx_amp_temp-1+3)<<tx_amp_reg_shift)));
-+ //printk("after : PORT[%d] 1e_%x = %x\n", phyaddr, tx_amp_reg_100, tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg_100));
-+ }
-+ } else if (phyaddr == 4) {
-+ if ((tx_amp_reg == 0x12) || (tx_amp_reg == 0x17)) {
-+ //printk("before : PORT[%d] 1e_%x = %x\n", phyaddr, tx_amp_reg, tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg));
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg, ((tx_amp_temp|((tx_amp_temp)<<tx_amp_reg_shift)) + 5));
-+ //printk("after : PORT[%d] 1e_%x = %x\n", phyaddr, tx_amp_reg, tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg));
-+ }
-+ if (tx_amp_reg_100 == 0x16) {
-+ //printk("before : PORT[%d] 1e_%x = %x\n", phyaddr, tx_amp_reg_100, tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg_100));
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg_100,(tx_amp_temp|((tx_amp_temp-2+4)<<tx_amp_reg_shift)));
-+ //printk("after : PORT[%d] 1e_%x = %x\n", phyaddr, tx_amp_reg_100, tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg_100));
-+ }
-+ if (tx_amp_reg_100 == 0x18) {
-+ //printk("before : PORT[%d] 1e_%x = %x\n", phyaddr, tx_amp_reg_100, tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg_100));
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg_100,(tx_amp_temp|((tx_amp_temp-1+4)<<tx_amp_reg_shift)));
-+ //printk("after : PORT[%d] 1e_%x = %x\n", phyaddr, tx_amp_reg_100, tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg_100));
-+ }
-+ }
-+
-+ if (calibration_pair == ANACAL_PAIR_A){
-+ reg_backup = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x12);
-+ reg_tmp = ((reg_backup & 0xfc00) >> 10);
-+ reg_tmp -= 8;
-+ reg_backup = 0x0000;
-+ reg_backup |= ((reg_tmp << 10) | (reg_tmp << 0));
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x12, reg_backup);
-+ reg_backup = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x12);
-+ //printk("PORT[%d] 1e.012 = %x (OFFSET_1000M_PAIR_A)\n", phyaddr, reg_backup);
-+ reg_backup = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x16);
-+ reg_tmp = ((reg_backup & 0x3f) >> 0);
-+ reg_tmp -= 8;
-+ reg_backup = (reg_backup & (~0x3f));
-+ reg_backup |= (reg_tmp << 0);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x16, reg_backup);
-+ reg_backup = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x16);
-+ //printk("PORT[%d] 1e.016 = %x (OFFSET_TESTMODE_1000M_PAIR_A)\n", phyaddr, reg_backup);
-+ }
-+ else if(calibration_pair == ANACAL_PAIR_B){
-+ reg_backup = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x17);
-+ reg_tmp = ((reg_backup & 0x3f00) >> 8);
-+ reg_tmp -= 8;
-+ reg_backup = 0x0000;
-+ reg_backup |= ((reg_tmp << 8) | (reg_tmp << 0));
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x17, reg_backup);
-+ reg_backup = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x17);
-+ //printk("PORT[%d] 1e.017 = %x (OFFSET_1000M_PAIR_B)\n", phyaddr, reg_backup);
-+ reg_backup = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x18);
-+ reg_tmp = ((reg_backup & 0x3f) >> 0);
-+ reg_tmp -= 8;
-+ reg_backup = (reg_backup & (~0x3f));
-+ reg_backup |= (reg_tmp << 0);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x18, reg_backup);
-+ reg_backup = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x18);
-+ //printk("PORT[%d] 1e.018 = %x (OFFSET_TESTMODE_1000M_PAIR_B)\n", phyaddr, reg_backup);
-+ }
-+ else if(calibration_pair == ANACAL_PAIR_C){
-+ reg_backup = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x19);
-+ reg_tmp = ((reg_backup & 0x3f00) >> 8);
-+ reg_tmp -= 8;
-+ reg_backup = (reg_backup & (~0x3f00));
-+ reg_backup |= (reg_tmp << 8);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x19, reg_backup);
-+ reg_backup = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x19);
-+ //printk("PORT[%d] 1e.019 = %x (OFFSET_1000M_PAIR_C)\n", phyaddr, reg_backup);
-+ reg_backup = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x20);
-+ reg_tmp = ((reg_backup & 0x3f) >> 0);
-+ reg_tmp -= 8;
-+ reg_backup = (reg_backup & (~0x3f));
-+ reg_backup |= (reg_tmp << 0);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x20, reg_backup);
-+ reg_backup = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x20);
-+ //printk("PORT[%d] 1e.020 = %x (OFFSET_TESTMODE_1000M_PAIR_C)\n", phyaddr, reg_backup);
-+ }
-+ else if(calibration_pair == ANACAL_PAIR_D){
-+ reg_backup = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x21);
-+ reg_tmp = ((reg_backup & 0x3f00) >> 8);
-+ reg_tmp -= 8;
-+ reg_backup = (reg_backup & (~0x3f00));
-+ reg_backup |= (reg_tmp << 8);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x21, reg_backup);
-+ reg_backup = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x21);
-+ //printk("PORT[%d] 1e.021 = %x (OFFSET_1000M_PAIR_D)\n", phyaddr, reg_backup);
-+ reg_backup = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x22);
-+ reg_tmp = ((reg_backup & 0x3f) >> 0);
-+ reg_tmp -= 8;
-+ reg_backup = (reg_backup & (~0x3f));
-+ reg_backup |= (reg_tmp << 0);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x22, reg_backup);
-+ reg_backup = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x22);
-+ //printk("PORT[%d] 1e.022 = %x (OFFSET_TESTMODE_1000M_PAIR_D)\n", phyaddr, reg_backup);
-+ }
-+
-+ if (calibration_pair == ANACAL_PAIR_A){
-+ //printk("PORT (%d) TX_AMP PAIR (A) FINAL CALIBRATION RESULT\n", phyaddr);
-+ debug_tmp = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x12);
-+ //printk("1e.012 = 0x%x\n", debug_tmp);
-+ debug_tmp = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x16);
-+ //printk("1e.016 = 0x%x\n", debug_tmp);
-+ }
-+
-+ else if(calibration_pair == ANACAL_PAIR_B){
-+ //printk("PORT (%d) TX_AMP PAIR (A) FINAL CALIBRATION RESULT\n", phyaddr);
-+ debug_tmp = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x17);
-+ //printk("1e.017 = 0x%x\n", debug_tmp);
-+ debug_tmp = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x18);
-+ //printk("1e.018 = 0x%x\n", debug_tmp);
-+ }
-+ else if(calibration_pair == ANACAL_PAIR_C){
-+ //printk("PORT (%d) TX_AMP PAIR (A) FINAL CALIBRATION RESULT\n", phyaddr);
-+ debug_tmp = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x19);
-+ //printk("1e.019 = 0x%x\n", debug_tmp);
-+ debug_tmp = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x20);
-+ //printk("1e.020 = 0x%x\n", debug_tmp);
-+ }
-+ else if(calibration_pair == ANACAL_PAIR_D){
-+ //printk("PORT (%d) TX_AMP PAIR (A) FINAL CALIBRATION RESULT\n", phyaddr);
-+ debug_tmp = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x21);
-+ //printk("1e.021 = 0x%x\n", debug_tmp);
-+ debug_tmp = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x22);
-+ //printk("1e.022 = 0x%x\n", debug_tmp);
-+ }
-+
-+
-+ printk( " GE Tx amp AnaCal Done! (pair-%d)(1e_%x = 0x%x)\n", calibration_pair, tx_amp_reg, tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg));
-+
-+ } else {
-+ if((tx_amp_temp == 0x3f)||(tx_amp_temp == 0x00)) {
-+ all_ana_cal_status = ANACAL_SATURATION; // need to FT
-+ printk( " GE Tx amp AnaCal Saturation! \r\n");
-+ }
-+ }
-+ }
-+
-+ if(all_ana_cal_status == ANACAL_ERROR) {
-+ tx_amp_temp = 0x20;
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, tx_amp_reg, (reg_temp|(tx_amp_temp<<tx_amp_reg_shift)));
-+ }
-+ }
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x017d, 0x0000);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x017e, 0x0000);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x017f, 0x0000);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0180, 0x0000);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0181, 0x0000);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0182, 0x0000);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0183, 0x0000);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0184, 0x0000);
-+
-+ /* disable analog calibration circuit */
-+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00db, 0x0000);
-+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00dc, 0x0000); // disable Tx offset calibration circuit
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00db, 0x0000); // disable analog calibration circuit
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dc, 0x0000); // disable Tx offset calibration circuit
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x003e, 0x0000); // disable Tx VLD force mode
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x00dd, 0x0000); // disable Tx offset/amplitude calibration circuit
-+
-+
-+
-+ //tc_phy_write_dev_reg(gsw, phyaddr, 0x1f, 0x273, 0x2000);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0xc9, 0x0fff);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x145, 0x1000);
-+
-+}
-+
-+//-----------------------------------------------------------------
-+
-+int phy_calibration(struct gsw_mt753x *gsw, u8 phyaddr)
-+{
-+ u32 reg_tmp,reg_tmp0, reg_tmp1, i;
-+ u32 CALDLY = 40;
-+ int ret;
-+ /* set [12]AN disable, [8]full duplex, [13/6]1000Mbps */
-+ //tc_phy_write_dev_reg(phyaddr, 0x0, 0x0140);
-+ switch_phy_write(gsw, phyaddr, R0, 0x140);
-+
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x145, 0x1010);/* fix mdi */
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, RG_185, 0);/* disable tx slew control */
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1f, 0x100, 0xc000);/* BG voltage output */
-+ //tc_phy_write_dev_reg(gsw, phyaddr, 0x1f, 0x403, 0x1099); //bypass efuse
-+
-+#if (1)
-+ // 1f_27c[12:8] cr_da_tx_i2mpb_10m Trimming TX bias setup(@10M)
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1f, 0x27c, 0x1f1f);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1f, 0x27c, 0x3300);
-+
-+ reg_tmp1 = tc_phy_read_dev_reg(gsw, PHY0, 0x1f, 0x27c);
-+ //dev1Fh_reg273h TXVLD DA register - Adjust voltage mode TX amplitude.
-+ //tc_phy_write_dev_reg(phyaddr, 0x1f, 0x273, 0);
-+ //tc_phy_write_dev_reg(gsw, phyaddr, 0x1f, 0x273, 0x1000);
-+ //reg_tmp1 = tc_phy_read_dev_reg(gsw, phyaddr, 0x1f, 0x273);
-+ //printk("reg_tmp1273 = %x\n", reg_tmp1);
-+ /*1e_11 TX overshoot Enable (PAIR A/B/C/D) in gbe mode*/
-+
-+ reg_tmp = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x11);
-+ reg_tmp = reg_tmp | (0xf << 12);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x11, reg_tmp);
-+ tc_phy_write_dev_reg(gsw, PHY0, 0x1e, 0x00e1, 0x10);
-+ /* calibration start ============ */
-+ printk("CALDLY = %d\n", CALDLY);
-+ if(ge_cal_flag == 0){
-+ ret = ge_cal_rext(gsw, 0, CALDLY);
-+ if (ret == -1){
-+ printk("ge_cal_rext error K port =%d\n", phyaddr);
-+ return ret;
-+ }
-+ ge_cal_flag = 1;
-+ }
-+
-+ /* *** R50 Cal start ***************************** */
-+ /*phyaddress = 0*/
-+ ret = ge_cal_r50(gsw, phyaddr, CALDLY);
-+ if (ret == -1){
-+ printk("R50 error K port =%d\n", phyaddr);
-+ return ret;
-+ }
-+ /* *** R50 Cal end *** */
-+ /* *** Tx offset Cal start *********************** */
-+ ret = ge_cal_tx_offset(gsw, phyaddr, CALDLY);
-+ if (ret == -1){
-+ printk("ge_cal_tx_offset error K port =%d\n", phyaddr);
-+ return ret;
-+ }
-+ /* *** Tx offset Cal end *** */
-+
-+ /* *** Tx Amp Cal start *** */
-+ ret = ge_cal_tx_amp(gsw, phyaddr, CALDLY);
-+ if (ret == -1){
-+ printk("ge_cal_tx_amp error K port =%d\n", phyaddr);
-+ return ret;
-+ }
-+ /* *** Tx Amp Cal end *** */
-+ /*tmp maybe changed*/
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1f, 0x27c, 0x1111);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1f, 0x27b, 0x47);
-+ //tc_phy_write_dev_reg(gsw, phyaddr, 0x1f, 0x273, 0x2000);
-+
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x3a8, 0x0810);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x3aa, 0x0008);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x3ab, 0x0810);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x3ad, 0x0008);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x3ae, 0x0106);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x3b0, 0x0001);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x3b1, 0x0106);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x3b3, 0x0001);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x18c, 0x0001);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x18d, 0x0001);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x18e, 0x0001);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x18f, 0x0001);
-+
-+ /*da_tx_bias1_b_tx_standby = 5'b10 (dev1eh_reg3aah[12:8])*/
-+ reg_tmp = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x3aa);
-+ reg_tmp = reg_tmp & ~(0x1f00);
-+ reg_tmp = reg_tmp | 0x2 << 8;
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x3aa, reg_tmp);
-+
-+ /*da_tx_bias1_a_tx_standby = 5'b10 (dev1eh_reg3a9h[4:0])*/
-+ reg_tmp = tc_phy_read_dev_reg(gsw, phyaddr, 0x1e, 0x3a9);
-+ reg_tmp = reg_tmp & ~(0x1f);
-+ reg_tmp = reg_tmp | 0x2;
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x3a9, reg_tmp);
-+#endif
-+}
-+
-+void rx_dc_offset(struct gsw_mt753x *gsw, u8 phyaddr)
-+{
-+ u32 reg_tmp1;
-+
-+ pr_info("PORT %d RX_DC_OFFSET\n", phyaddr);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x96, 0x8000);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x37, 0x3);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x107, 0x4000);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x171, 0x1e5);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x39, 0x200f);
-+ udelay(40);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x39, 0x000f);
-+ udelay(40);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x171, 0x65);
-+}
-+
-+void check_rx_dc_offset_pair_a(struct gsw_mt753x *gsw, u8 phyaddr)
-+{
-+ u32 reg_tmp;
-+ u8 reg_val;
-+
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1f, 0x15, (phyaddr << 13) | 0x114f);
-+ reg_tmp = tc_phy_read_dev_reg(gsw, phyaddr, 0x1f, 0x1a);
-+ reg_tmp = reg_tmp & 0xff;
-+ pr_info("before pairA output = %x\n", reg_tmp);
-+ udelay(40);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1f, 0x15, (phyaddr << 13) | 0x1142);
-+ udelay(40);
-+ reg_tmp = tc_phy_read_dev_reg(gsw, phyaddr, 0x1f, 0x1a);
-+ reg_tmp = reg_tmp & 0xff;
-+ pr_info("after pairA output = %x\n", reg_tmp);
-+ if ((reg_tmp & 0x80) != 0)
-+ reg_tmp = (~reg_tmp) + 1;
-+ if ((reg_tmp & 0xff) >4)
-+ pr_info("pairA RX_DC_OFFSET error");
-+}
-+
-+void check_rx_dc_offset_pair_b(struct gsw_mt753x *gsw, u8 phyaddr)
-+{
-+ u32 reg_tmp;
-+ u8 reg_val;
-+
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1f, 0x15, (phyaddr << 13) | 0x1151);
-+ reg_tmp = tc_phy_read_dev_reg(gsw, phyaddr, 0x1f, 0x1a);
-+ reg_tmp = reg_tmp & 0xff;
-+ pr_info("before pairB output = %x\n", reg_tmp);
-+ udelay(40);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1f, 0x15, (phyaddr << 13) | 0x1143);
-+ udelay(40);
-+ reg_tmp = tc_phy_read_dev_reg(gsw, phyaddr, 0x1f, 0x1a);
-+ reg_tmp = reg_tmp & 0xff;
-+ pr_info("after pairB output = %x\n", reg_tmp);
-+ if ((reg_tmp & 0x80) != 0)
-+ reg_tmp = (~reg_tmp) + 1;
-+ if ((reg_tmp & 0xff) >4)
-+ pr_info("pairB RX_DC_OFFSET error");
-+}
-+
-+void check_rx_dc_offset_pair_c(struct gsw_mt753x *gsw, u8 phyaddr)
-+{
-+ u32 reg_tmp;
-+ u8 reg_val;
-+
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1f, 0x15, (phyaddr << 13) | 0x1153);
-+ reg_tmp = tc_phy_read_dev_reg(gsw, phyaddr, 0x1f, 0x1a);
-+ reg_tmp = reg_tmp & 0xff;
-+ pr_info("before pairC output = %x\n", reg_tmp);
-+ udelay(40);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1f, 0x15, (phyaddr << 13) | 0x1144);
-+ udelay(40);
-+ reg_tmp = tc_phy_read_dev_reg(gsw, phyaddr, 0x1f, 0x1a);
-+ reg_tmp = reg_tmp & 0xff;
-+ pr_info("after pairC output = %x\n", reg_tmp);
-+ if ((reg_tmp & 0x80) != 0)
-+ reg_tmp = (~reg_tmp) + 1;
-+ if ((reg_tmp & 0xff) >4)
-+ pr_info("pairC RX_DC_OFFSET error");
-+}
-+
-+void check_rx_dc_offset_pair_d(struct gsw_mt753x *gsw, u8 phyaddr)
-+{
-+ u32 reg_tmp;
-+ u8 reg_val;
-+
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1f, 0x15, (phyaddr << 13) | 0x1155);
-+ reg_tmp = tc_phy_read_dev_reg(gsw, phyaddr, 0x1f, 0x1a);
-+ reg_tmp = reg_tmp & 0xff;
-+ pr_info("before pairD output = %x\n", reg_tmp);
-+ udelay(40);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1f, 0x15, (phyaddr << 13) | 0x1145);
-+ udelay(40);
-+ reg_tmp = tc_phy_read_dev_reg(gsw, phyaddr, 0x1f, 0x1a);
-+ reg_tmp = reg_tmp & 0xff;
-+ pr_info("after pairD output = %x\n", reg_tmp);
-+ if ((reg_tmp & 0x80) != 0)
-+ reg_tmp = (~reg_tmp) + 1;
-+ if ((reg_tmp & 0xff) >4)
-+ pr_info("pairD RX_DC_OFFSET error");
-+}
-+
-+
-+int mt753x_phy_calibration(struct gsw_mt753x *gsw, u8 phyaddr){
-+
-+ int ret;
-+
-+ phy_calibration(gsw, phyaddr);
-+
-+ /*eye pic*/
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x0, 0x187);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x1, 0x1c9);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x2, 0x1c6);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x3, 0x182);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x4, 0x208);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x5, 0x205);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x6, 0x384);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x7, 0x3cb);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x8, 0x3c4);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0x9, 0x30a);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0xa, 0x00b);
-+ tc_phy_write_dev_reg(gsw, phyaddr, 0x1e, 0xb, 0x002);
-+
-+ rx_dc_offset(gsw, phyaddr);
-+ check_rx_dc_offset_pair_a(gsw, phyaddr);
-+ check_rx_dc_offset_pair_b(gsw, phyaddr);
-+ check_rx_dc_offset_pair_c(gsw, phyaddr);
-+ check_rx_dc_offset_pair_d(gsw, phyaddr);
-+
-+ return ret;
-+}
---- /dev/null
-+++ b/drivers/net/phy/mtk/mt753x/mt753x_phy.h
-@@ -0,0 +1,145 @@
-+/* SPDX-License-Identifier: GPL-2.0+ */
-+/*
-+ * Register definitions for MediaTek MT753x Gigabit switches
-+ *
-+ * Copyright (C) 2018 MediaTek Inc. All Rights Reserved.
-+ *
-+ * Author: Weijie Gao <weijie.gao@mediatek.com>
-+ */
-+
-+#ifndef _MT753X_PHY_H_
-+#define _MT753X_PHY_H_
-+
-+#include <linux/bitops.h>
-+
-+/*phy calibration use*/
-+#define DEV_1E 0x1E
-+/*global device 0x1f, always set P0*/
-+#define DEV_1F 0x1F
-+
-+
-+/************IEXT/REXT CAL***************/
-+/* bits range: for example BITS(16,23) = 0xFF0000*/
-+#define BITS(m, n) (~(BIT(m) - 1) & ((BIT(n) - 1) | BIT(n)))
-+#define ANACAL_INIT 0x01
-+#define ANACAL_ERROR 0xFD
-+#define ANACAL_SATURATION 0xFE
-+#define ANACAL_FINISH 0xFF
-+#define ANACAL_PAIR_A 0
-+#define ANACAL_PAIR_B 1
-+#define ANACAL_PAIR_C 2
-+#define ANACAL_PAIR_D 3
-+#define DAC_IN_0V 0x00
-+#define DAC_IN_2V 0xf0
-+#define TX_AMP_OFFSET_0MV 0x20
-+#define TX_AMP_OFFSET_VALID_BITS 6
-+
-+#define R0 0
-+#define PHY0 0
-+#define PHY1 1
-+#define PHY2 2
-+#define PHY3 3
-+#define PHY4 4
-+#define ANA_TEST_MODE BITS(8, 15)
-+#define TST_TCLK_SEL BITs(6, 7)
-+#define ANA_TEST_VGA_RG 0x100
-+
-+#define FORCE_MDI_CROSS_OVER BITS(3, 4)
-+#define T10_TEST_CTL_RG 0x145
-+#define RG_185 0x185
-+#define RG_TX_SLEW BIT(0)
-+#define ANA_CAL_0 0xdb
-+#define RG_CAL_CKINV BIT(12)
-+#define RG_ANA_CALEN BIT(8)
-+#define RG_REXT_CALEN BIT(4)
-+#define RG_ZCALEN_A BIT(0)
-+#define ANA_CAL_1 0xdc
-+#define RG_ZCALEN_B BIT(12)
-+#define RG_ZCALEN_C BIT(8)
-+#define RG_ZCALEN_D BIT(4)
-+#define RG_TXVOS_CALEN BIT(0)
-+#define ANA_CAL_6 0xe1
-+#define RG_CAL_REFSEL BIT(4)
-+#define RG_CAL_COMP_PWD BIT(0)
-+#define ANA_CAL_5 0xe0
-+#define RG_REXT_TRIM BITs(8, 13)
-+#define RG_ZCAL_CTRL BITs(0, 5)
-+#define RG_17A 0x17a
-+#define AD_CAL_COMP_OUT BIT(8)
-+#define RG_17B 0x17b
-+#define AD_CAL_CLK bit(0)
-+#define RG_17C 0x17c
-+#define DA_CALIN_FLAG bit(0)
-+/************R50 CAL****************************/
-+#define RG_174 0x174
-+#define RG_R50OHM_RSEL_TX_A_EN BIT[15]
-+#define CR_R50OHM_RSEL_TX_A BITS[8:14]
-+#define RG_R50OHM_RSEL_TX_B_EN BIT[7]
-+#define CR_R50OHM_RSEL_TX_B BITS[6:0]
-+#define RG_175 0x175
-+#define RG_R50OHM_RSEL_TX_C_EN BITS[15]
-+#define CR_R50OHM_RSEL_TX_C BITS[8:14]
-+#define RG_R50OHM_RSEL_TX_D_EN BIT[7]
-+#define CR_R50OHM_RSEL_TX_D BITS[0:6]
-+/**********TX offset Calibration***************************/
-+#define RG_95 0x96
-+#define BYPASS_TX_OFFSET_CAL BIT(15)
-+#define RG_3E 0x3e
-+#define BYPASS_PD_TXVLD_A BIT(15)
-+#define BYPASS_PD_TXVLD_B BIT(14)
-+#define BYPASS_PD_TXVLD_C BIT(13)
-+#define BYPASS_PD_TXVLD_D BIT(12)
-+#define BYPASS_PD_TX_10M BIT(11)
-+#define POWER_DOWN_TXVLD_A BIT(7)
-+#define POWER_DOWN_TXVLD_B BIT(6)
-+#define POWER_DOWN_TXVLD_C BIT(5)
-+#define POWER_DOWN_TXVLD_D BIT(4)
-+#define POWER_DOWN_TX_10M BIT(3)
-+#define RG_DD 0xdd
-+#define RG_TXG_CALEN_A BIT(12)
-+#define RG_TXG_CALEN_B BIT(8)
-+#define RG_TXG_CALEN_C BIT(4)
-+#define RG_TXG_CALEN_D BIT(0)
-+#define RG_17D 0x17D
-+#define FORCE_DASN_DAC_IN0_A BIT(15)
-+#define DASN_DAC_IN0_A BITS(0, 9)
-+#define RG_17E 0x17E
-+#define FORCE_DASN_DAC_IN0_B BIT(15)
-+#define DASN_DAC_IN0_B BITS(0, 9)
-+#define RG_17F 0x17F
-+
-+#define FORCE_DASN_DAC_IN0_C BIT(15)
-+#define DASN_DAC_IN0_C BITS(0, 9)
-+#define RG_180 0x180
-+#define FORCE_DASN_DAC_IN0_D BIT(15)
-+#define DASN_DAC_IN0_D BITS(0, 9)
-+
-+#define RG_181 0x181
-+#define FORCE_DASN_DAC_IN1_A BIT(15)
-+#define DASN_DAC_IN1_A BITS(0, 9)
-+#define RG_182 0x182
-+#define FORCE_DASN_DAC_IN1_B BIT(15)
-+#define DASN_DAC_IN1_B BITS(0, 9)
-+#define RG_183 0x183
-+#define FORCE_DASN_DAC_IN1_C BIT15]
-+#define DASN_DAC_IN1_C BITS(0, 9)
-+#define RG_184 0x184
-+#define FORCE_DASN_DAC_IN1_D BIT(15)
-+#define DASN_DAC_IN1_D BITS(0, 9)
-+#define RG_172 0x172
-+#define CR_TX_AMP_OFFSET_A BITS(8, 13)
-+#define CR_TX_AMP_OFFSET_B BITS(0, 5)
-+#define RG_173 0x173
-+#define CR_TX_AMP_OFFSET_C BITS(8, 13)
-+#define CR_TX_AMP_OFFSET_D BITS(0, 5)
-+/**********TX Amp Calibration ***************************/
-+#define RG_12 0x12
-+#define DA_TX_I2MPB_A_GBE BITS(10, 15)
-+#define RG_17 0x17
-+#define DA_TX_I2MPB_B_GBE BITS(8, 13)
-+#define RG_19 0x19
-+#define DA_TX_I2MPB_C_GBE BITS(8, 13)
-+#define RG_21 0x21
-+#define DA_TX_I2MPB_D_GBE BITS(8, 13)
-+
-+#endif /* _MT753X_REGS_H_ */
+++ /dev/null
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -292,6 +292,8 @@ config RTL8367B_PHY
-
- endif # RTL8366_SMI
-
-+source "drivers/net/phy/mtk/mt753x/Kconfig"
-+
- comment "MII PHY device drivers"
-
- config SFP
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -101,3 +101,5 @@ obj-$(CONFIG_STE10XP) += ste10Xp.o
- obj-$(CONFIG_TERANETICS_PHY) += teranetics.o
- obj-$(CONFIG_VITESSE_PHY) += vitesse.o
- obj-$(CONFIG_XILINX_GMII2RGMII) += xilinx_gmii2rgmii.o
-+obj-$(CONFIG_MT753X_GSW) += mtk/mt753x/
-+
+++ /dev/null
-From 3b5e748615e714711220b2a95d19bd25a037db09 Mon Sep 17 00:00:00 2001
-From: Ryder Lee <ryder.lee@mediatek.com>
-Date: Mon, 5 Nov 2018 16:43:55 +0800
-Subject: [PATCH] clk: mediatek: add clock support for MT7629 SoC
-
-Add all supported clocks exported from every susbystem found on MT7629 SoC.
-
-Signed-off-by: Wenzhen Yu <wenzhen.yu@mediatek.com>
-Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
-Acked-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/mediatek/Kconfig | 23 +
- drivers/clk/mediatek/Makefile | 3 +
- drivers/clk/mediatek/clk-mt7629-eth.c | 159 ++++++
- drivers/clk/mediatek/clk-mt7629-hif.c | 156 ++++++
- drivers/clk/mediatek/clk-mt7629.c | 723 +++++++++++++++++++++++++
- include/dt-bindings/clock/mt7629-clk.h | 203 +++++++
- 6 files changed, 1267 insertions(+)
- create mode 100644 drivers/clk/mediatek/clk-mt7629-eth.c
- create mode 100644 drivers/clk/mediatek/clk-mt7629-hif.c
- create mode 100644 drivers/clk/mediatek/clk-mt7629.c
- create mode 100644 include/dt-bindings/clock/mt7629-clk.h
-
---- a/drivers/clk/mediatek/Kconfig
-+++ b/drivers/clk/mediatek/Kconfig
-@@ -178,6 +178,29 @@ config COMMON_CLK_MT7622_AUDSYS
- This driver supports MediaTek MT7622 AUDSYS clocks providing
- to audio consumers such as I2S and TDM.
-
-+config COMMON_CLK_MT7629
-+ bool "Clock driver for MediaTek MT7629"
-+ depends on (ARCH_MEDIATEK && ARM) || COMPILE_TEST
-+ select COMMON_CLK_MEDIATEK
-+ default ARCH_MEDIATEK && ARM
-+ ---help---
-+ This driver supports MediaTek MT7629 basic clocks and clocks
-+ required for various periperals found on MediaTek.
-+
-+config COMMON_CLK_MT7629_ETHSYS
-+ bool "Clock driver for MediaTek MT7629 ETHSYS"
-+ depends on COMMON_CLK_MT7629
-+ ---help---
-+ This driver add support for clocks for Ethernet and SGMII
-+ required on MediaTek MT7629 SoC.
-+
-+config COMMON_CLK_MT7629_HIFSYS
-+ bool "Clock driver for MediaTek MT7629 HIFSYS"
-+ depends on COMMON_CLK_MT7629
-+ ---help---
-+ This driver supports MediaTek MT7629 HIFSYS clocks providing
-+ to PCI-E and USB.
-+
- config COMMON_CLK_MT8135
- bool "Clock driver for MediaTek MT8135"
- depends on (ARCH_MEDIATEK && ARM) || COMPILE_TEST
---- a/drivers/clk/mediatek/Makefile
-+++ b/drivers/clk/mediatek/Makefile
-@@ -26,5 +26,8 @@ obj-$(CONFIG_COMMON_CLK_MT7622) += clk-m
- obj-$(CONFIG_COMMON_CLK_MT7622_ETHSYS) += clk-mt7622-eth.o
- obj-$(CONFIG_COMMON_CLK_MT7622_HIFSYS) += clk-mt7622-hif.o
- obj-$(CONFIG_COMMON_CLK_MT7622_AUDSYS) += clk-mt7622-aud.o
-+obj-$(CONFIG_COMMON_CLK_MT7629) += clk-mt7629.o
-+obj-$(CONFIG_COMMON_CLK_MT7629_ETHSYS) += clk-mt7629-eth.o
-+obj-$(CONFIG_COMMON_CLK_MT7629_HIFSYS) += clk-mt7629-hif.o
- obj-$(CONFIG_COMMON_CLK_MT8135) += clk-mt8135.o
- obj-$(CONFIG_COMMON_CLK_MT8173) += clk-mt8173.o
---- /dev/null
-+++ b/drivers/clk/mediatek/clk-mt7629-eth.c
-@@ -0,0 +1,159 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (C) 2018 MediaTek Inc.
-+ * Author: Wenzhen Yu <Wenzhen Yu@mediatek.com>
-+ * Ryder Lee <ryder.lee@mediatek.com>
-+ */
-+
-+#include <linux/clk-provider.h>
-+#include <linux/of.h>
-+#include <linux/of_address.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+
-+#include "clk-mtk.h"
-+#include "clk-gate.h"
-+
-+#include <dt-bindings/clock/mt7629-clk.h>
-+
-+#define GATE_ETH(_id, _name, _parent, _shift) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .parent_name = _parent, \
-+ .regs = ð_cg_regs, \
-+ .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_no_setclr_inv, \
-+ }
-+
-+static const struct mtk_gate_regs eth_cg_regs = {
-+ .set_ofs = 0x30,
-+ .clr_ofs = 0x30,
-+ .sta_ofs = 0x30,
-+};
-+
-+static const struct mtk_gate eth_clks[] = {
-+ GATE_ETH(CLK_ETH_FE_EN, "eth_fe_en", "eth2pll", 6),
-+ GATE_ETH(CLK_ETH_GP2_EN, "eth_gp2_en", "txclk_src_pre", 7),
-+ GATE_ETH(CLK_ETH_GP1_EN, "eth_gp1_en", "txclk_src_pre", 8),
-+ GATE_ETH(CLK_ETH_GP0_EN, "eth_gp0_en", "txclk_src_pre", 9),
-+ GATE_ETH(CLK_ETH_ESW_EN, "eth_esw_en", "eth_500m", 16),
-+};
-+
-+static const struct mtk_gate_regs sgmii_cg_regs = {
-+ .set_ofs = 0xE4,
-+ .clr_ofs = 0xE4,
-+ .sta_ofs = 0xE4,
-+};
-+
-+#define GATE_SGMII(_id, _name, _parent, _shift) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .parent_name = _parent, \
-+ .regs = &sgmii_cg_regs, \
-+ .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_no_setclr_inv, \
-+ }
-+
-+static const struct mtk_gate sgmii_clks[2][4] = {
-+ {
-+ GATE_SGMII(CLK_SGMII_TX_EN, "sgmii_tx_en",
-+ "ssusb_tx250m", 2),
-+ GATE_SGMII(CLK_SGMII_RX_EN, "sgmii_rx_en",
-+ "ssusb_eq_rx250m", 3),
-+ GATE_SGMII(CLK_SGMII_CDR_REF, "sgmii_cdr_ref",
-+ "ssusb_cdr_ref", 4),
-+ GATE_SGMII(CLK_SGMII_CDR_FB, "sgmii_cdr_fb",
-+ "ssusb_cdr_fb", 5),
-+ }, {
-+ GATE_SGMII(CLK_SGMII_TX_EN, "sgmii_tx_en1",
-+ "ssusb_tx250m", 2),
-+ GATE_SGMII(CLK_SGMII_RX_EN, "sgmii_rx_en1",
-+ "ssusb_eq_rx250m", 3),
-+ GATE_SGMII(CLK_SGMII_CDR_REF, "sgmii_cdr_ref1",
-+ "ssusb_cdr_ref", 4),
-+ GATE_SGMII(CLK_SGMII_CDR_FB, "sgmii_cdr_fb1",
-+ "ssusb_cdr_fb", 5),
-+ }
-+};
-+
-+static int clk_mt7629_ethsys_init(struct platform_device *pdev)
-+{
-+ struct clk_onecell_data *clk_data;
-+ struct device_node *node = pdev->dev.of_node;
-+ int r;
-+
-+ clk_data = mtk_alloc_clk_data(CLK_ETH_NR_CLK);
-+
-+ mtk_clk_register_gates(node, eth_clks, CLK_ETH_NR_CLK, clk_data);
-+
-+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
-+ if (r)
-+ dev_err(&pdev->dev,
-+ "could not register clock provider: %s: %d\n",
-+ pdev->name, r);
-+
-+ mtk_register_reset_controller(node, 1, 0x34);
-+
-+ return r;
-+}
-+
-+static int clk_mt7629_sgmiisys_init(struct platform_device *pdev)
-+{
-+ struct clk_onecell_data *clk_data;
-+ struct device_node *node = pdev->dev.of_node;
-+ static int id;
-+ int r;
-+
-+ clk_data = mtk_alloc_clk_data(CLK_SGMII_NR_CLK);
-+
-+ mtk_clk_register_gates(node, sgmii_clks[id++], CLK_SGMII_NR_CLK,
-+ clk_data);
-+
-+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
-+ if (r)
-+ dev_err(&pdev->dev,
-+ "could not register clock provider: %s: %d\n",
-+ pdev->name, r);
-+
-+ return r;
-+}
-+
-+static const struct of_device_id of_match_clk_mt7629_eth[] = {
-+ {
-+ .compatible = "mediatek,mt7629-ethsys",
-+ .data = clk_mt7629_ethsys_init,
-+ }, {
-+ .compatible = "mediatek,mt7629-sgmiisys",
-+ .data = clk_mt7629_sgmiisys_init,
-+ }, {
-+ /* sentinel */
-+ }
-+};
-+
-+static int clk_mt7629_eth_probe(struct platform_device *pdev)
-+{
-+ int (*clk_init)(struct platform_device *);
-+ int r;
-+
-+ clk_init = of_device_get_match_data(&pdev->dev);
-+ if (!clk_init)
-+ return -EINVAL;
-+
-+ r = clk_init(pdev);
-+ if (r)
-+ dev_err(&pdev->dev,
-+ "could not register clock provider: %s: %d\n",
-+ pdev->name, r);
-+
-+ return r;
-+}
-+
-+static struct platform_driver clk_mt7629_eth_drv = {
-+ .probe = clk_mt7629_eth_probe,
-+ .driver = {
-+ .name = "clk-mt7629-eth",
-+ .of_match_table = of_match_clk_mt7629_eth,
-+ },
-+};
-+
-+builtin_platform_driver(clk_mt7629_eth_drv);
---- /dev/null
-+++ b/drivers/clk/mediatek/clk-mt7629-hif.c
-@@ -0,0 +1,156 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (C) 2018 MediaTek Inc.
-+ * Author: Wenzhen Yu <Wenzhen Yu@mediatek.com>
-+ * Ryder Lee <ryder.lee@mediatek.com>
-+ */
-+
-+#include <linux/clk-provider.h>
-+#include <linux/of.h>
-+#include <linux/of_address.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+
-+#include "clk-mtk.h"
-+#include "clk-gate.h"
-+
-+#include <dt-bindings/clock/mt7629-clk.h>
-+
-+#define GATE_PCIE(_id, _name, _parent, _shift) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .parent_name = _parent, \
-+ .regs = &pcie_cg_regs, \
-+ .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_no_setclr_inv, \
-+ }
-+
-+#define GATE_SSUSB(_id, _name, _parent, _shift) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .parent_name = _parent, \
-+ .regs = &ssusb_cg_regs, \
-+ .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_no_setclr_inv, \
-+ }
-+
-+static const struct mtk_gate_regs pcie_cg_regs = {
-+ .set_ofs = 0x30,
-+ .clr_ofs = 0x30,
-+ .sta_ofs = 0x30,
-+};
-+
-+static const struct mtk_gate_regs ssusb_cg_regs = {
-+ .set_ofs = 0x30,
-+ .clr_ofs = 0x30,
-+ .sta_ofs = 0x30,
-+};
-+
-+static const struct mtk_gate ssusb_clks[] = {
-+ GATE_SSUSB(CLK_SSUSB_U2_PHY_1P_EN, "ssusb_u2_phy_1p",
-+ "to_u2_phy_1p", 0),
-+ GATE_SSUSB(CLK_SSUSB_U2_PHY_EN, "ssusb_u2_phy_en", "to_u2_phy", 1),
-+ GATE_SSUSB(CLK_SSUSB_REF_EN, "ssusb_ref_en", "to_usb3_ref", 5),
-+ GATE_SSUSB(CLK_SSUSB_SYS_EN, "ssusb_sys_en", "to_usb3_sys", 6),
-+ GATE_SSUSB(CLK_SSUSB_MCU_EN, "ssusb_mcu_en", "to_usb3_mcu", 7),
-+ GATE_SSUSB(CLK_SSUSB_DMA_EN, "ssusb_dma_en", "to_usb3_dma", 8),
-+};
-+
-+static const struct mtk_gate pcie_clks[] = {
-+ GATE_PCIE(CLK_PCIE_P1_AUX_EN, "pcie_p1_aux_en", "p1_1mhz", 12),
-+ GATE_PCIE(CLK_PCIE_P1_OBFF_EN, "pcie_p1_obff_en", "free_run_4mhz", 13),
-+ GATE_PCIE(CLK_PCIE_P1_AHB_EN, "pcie_p1_ahb_en", "from_top_ahb", 14),
-+ GATE_PCIE(CLK_PCIE_P1_AXI_EN, "pcie_p1_axi_en", "from_top_axi", 15),
-+ GATE_PCIE(CLK_PCIE_P1_MAC_EN, "pcie_p1_mac_en", "pcie1_mac_en", 16),
-+ GATE_PCIE(CLK_PCIE_P1_PIPE_EN, "pcie_p1_pipe_en", "pcie1_pipe_en", 17),
-+ GATE_PCIE(CLK_PCIE_P0_AUX_EN, "pcie_p0_aux_en", "p0_1mhz", 18),
-+ GATE_PCIE(CLK_PCIE_P0_OBFF_EN, "pcie_p0_obff_en", "free_run_4mhz", 19),
-+ GATE_PCIE(CLK_PCIE_P0_AHB_EN, "pcie_p0_ahb_en", "from_top_ahb", 20),
-+ GATE_PCIE(CLK_PCIE_P0_AXI_EN, "pcie_p0_axi_en", "from_top_axi", 21),
-+ GATE_PCIE(CLK_PCIE_P0_MAC_EN, "pcie_p0_mac_en", "pcie0_mac_en", 22),
-+ GATE_PCIE(CLK_PCIE_P0_PIPE_EN, "pcie_p0_pipe_en", "pcie0_pipe_en", 23),
-+};
-+
-+static int clk_mt7629_ssusbsys_init(struct platform_device *pdev)
-+{
-+ struct clk_onecell_data *clk_data;
-+ struct device_node *node = pdev->dev.of_node;
-+ int r;
-+
-+ clk_data = mtk_alloc_clk_data(CLK_SSUSB_NR_CLK);
-+
-+ mtk_clk_register_gates(node, ssusb_clks, ARRAY_SIZE(ssusb_clks),
-+ clk_data);
-+
-+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
-+ if (r)
-+ dev_err(&pdev->dev,
-+ "could not register clock provider: %s: %d\n",
-+ pdev->name, r);
-+
-+ mtk_register_reset_controller(node, 1, 0x34);
-+
-+ return r;
-+}
-+
-+static int clk_mt7629_pciesys_init(struct platform_device *pdev)
-+{
-+ struct clk_onecell_data *clk_data;
-+ struct device_node *node = pdev->dev.of_node;
-+ int r;
-+
-+ clk_data = mtk_alloc_clk_data(CLK_PCIE_NR_CLK);
-+
-+ mtk_clk_register_gates(node, pcie_clks, ARRAY_SIZE(pcie_clks),
-+ clk_data);
-+
-+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
-+ if (r)
-+ dev_err(&pdev->dev,
-+ "could not register clock provider: %s: %d\n",
-+ pdev->name, r);
-+
-+ mtk_register_reset_controller(node, 1, 0x34);
-+
-+ return r;
-+}
-+
-+static const struct of_device_id of_match_clk_mt7629_hif[] = {
-+ {
-+ .compatible = "mediatek,mt7629-pciesys",
-+ .data = clk_mt7629_pciesys_init,
-+ }, {
-+ .compatible = "mediatek,mt7629-ssusbsys",
-+ .data = clk_mt7629_ssusbsys_init,
-+ }, {
-+ /* sentinel */
-+ }
-+};
-+
-+static int clk_mt7629_hif_probe(struct platform_device *pdev)
-+{
-+ int (*clk_init)(struct platform_device *);
-+ int r;
-+
-+ clk_init = of_device_get_match_data(&pdev->dev);
-+ if (!clk_init)
-+ return -EINVAL;
-+
-+ r = clk_init(pdev);
-+ if (r)
-+ dev_err(&pdev->dev,
-+ "could not register clock provider: %s: %d\n",
-+ pdev->name, r);
-+
-+ return r;
-+}
-+
-+static struct platform_driver clk_mt7629_hif_drv = {
-+ .probe = clk_mt7629_hif_probe,
-+ .driver = {
-+ .name = "clk-mt7629-hif",
-+ .of_match_table = of_match_clk_mt7629_hif,
-+ },
-+};
-+
-+builtin_platform_driver(clk_mt7629_hif_drv);
---- /dev/null
-+++ b/drivers/clk/mediatek/clk-mt7629.c
-@@ -0,0 +1,723 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (C) 2018 MediaTek Inc.
-+ * Author: Wenzhen Yu <Wenzhen Yu@mediatek.com>
-+ * Ryder Lee <ryder.lee@mediatek.com>
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/clk-provider.h>
-+#include <linux/of.h>
-+#include <linux/of_address.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+
-+#include "clk-mtk.h"
-+#include "clk-gate.h"
-+#include "clk-cpumux.h"
-+
-+#include <dt-bindings/clock/mt7629-clk.h>
-+
-+#define MT7629_PLL_FMAX (2500UL * MHZ)
-+#define CON0_MT7629_RST_BAR BIT(24)
-+
-+#define PLL_B(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits, \
-+ _pd_reg, _pd_shift, _tuner_reg, _pcw_reg, \
-+ _pcw_shift, _div_table, _parent_name) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .reg = _reg, \
-+ .pwr_reg = _pwr_reg, \
-+ .en_mask = _en_mask, \
-+ .flags = _flags, \
-+ .rst_bar_mask = CON0_MT7629_RST_BAR, \
-+ .fmax = MT7629_PLL_FMAX, \
-+ .pcwbits = _pcwbits, \
-+ .pd_reg = _pd_reg, \
-+ .pd_shift = _pd_shift, \
-+ .tuner_reg = _tuner_reg, \
-+ .pcw_reg = _pcw_reg, \
-+ .pcw_shift = _pcw_shift, \
-+ .div_table = _div_table, \
-+ .parent_name = _parent_name, \
-+ }
-+
-+#define PLL(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits, \
-+ _pd_reg, _pd_shift, _tuner_reg, _pcw_reg, \
-+ _pcw_shift) \
-+ PLL_B(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits, \
-+ _pd_reg, _pd_shift, _tuner_reg, _pcw_reg, _pcw_shift, \
-+ NULL, "clk20m")
-+
-+#define GATE_APMIXED(_id, _name, _parent, _shift) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .parent_name = _parent, \
-+ .regs = &apmixed_cg_regs, \
-+ .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_no_setclr_inv, \
-+ }
-+
-+#define GATE_INFRA(_id, _name, _parent, _shift) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .parent_name = _parent, \
-+ .regs = &infra_cg_regs, \
-+ .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_setclr, \
-+ }
-+
-+#define GATE_PERI0(_id, _name, _parent, _shift) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .parent_name = _parent, \
-+ .regs = &peri0_cg_regs, \
-+ .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_setclr, \
-+ }
-+
-+#define GATE_PERI1(_id, _name, _parent, _shift) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .parent_name = _parent, \
-+ .regs = &peri1_cg_regs, \
-+ .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_setclr, \
-+ }
-+
-+static DEFINE_SPINLOCK(mt7629_clk_lock);
-+
-+static const char * const axi_parents[] = {
-+ "clkxtal",
-+ "syspll1_d2",
-+ "syspll_d5",
-+ "syspll1_d4",
-+ "univpll_d5",
-+ "univpll2_d2",
-+ "univpll_d7",
-+ "dmpll_ck"
-+};
-+
-+static const char * const mem_parents[] = {
-+ "clkxtal",
-+ "dmpll_ck"
-+};
-+
-+static const char * const ddrphycfg_parents[] = {
-+ "clkxtal",
-+ "syspll1_d8"
-+};
-+
-+static const char * const eth_parents[] = {
-+ "clkxtal",
-+ "syspll1_d2",
-+ "univpll1_d2",
-+ "syspll1_d4",
-+ "univpll_d5",
-+ "sgmiipll_d2",
-+ "univpll_d7",
-+ "dmpll_ck"
-+};
-+
-+static const char * const pwm_parents[] = {
-+ "clkxtal",
-+ "univpll2_d4"
-+};
-+
-+static const char * const f10m_ref_parents[] = {
-+ "clkxtal",
-+ "sgmiipll_d2"
-+};
-+
-+static const char * const nfi_infra_parents[] = {
-+ "clkxtal",
-+ "clkxtal",
-+ "clkxtal",
-+ "clkxtal",
-+ "clkxtal",
-+ "clkxtal",
-+ "univpll2_d8",
-+ "univpll3_d4",
-+ "syspll1_d8",
-+ "univpll1_d8",
-+ "syspll4_d2",
-+ "syspll2_d4",
-+ "univpll2_d4",
-+ "univpll3_d2",
-+ "syspll1_d4",
-+ "syspll_d7"
-+};
-+
-+static const char * const flash_parents[] = {
-+ "clkxtal",
-+ "univpll_d80_d4",
-+ "syspll2_d8",
-+ "syspll3_d4",
-+ "univpll3_d4",
-+ "univpll1_d8",
-+ "syspll2_d4",
-+ "univpll2_d4"
-+};
-+
-+static const char * const uart_parents[] = {
-+ "clkxtal",
-+ "univpll2_d8"
-+};
-+
-+static const char * const spi0_parents[] = {
-+ "clkxtal",
-+ "syspll3_d2",
-+ "clkxtal",
-+ "syspll2_d4",
-+ "syspll4_d2",
-+ "univpll2_d4",
-+ "univpll1_d8",
-+ "clkxtal"
-+};
-+
-+static const char * const spi1_parents[] = {
-+ "clkxtal",
-+ "syspll3_d2",
-+ "clkxtal",
-+ "syspll4_d4",
-+ "syspll4_d2",
-+ "univpll2_d4",
-+ "univpll1_d8",
-+ "clkxtal"
-+};
-+
-+static const char * const msdc30_0_parents[] = {
-+ "clkxtal",
-+ "univpll2_d16",
-+ "univ48m"
-+};
-+
-+static const char * const msdc30_1_parents[] = {
-+ "clkxtal",
-+ "univpll2_d16",
-+ "univ48m",
-+ "syspll2_d4",
-+ "univpll2_d4",
-+ "syspll_d7",
-+ "syspll2_d2",
-+ "univpll2_d2"
-+};
-+
-+static const char * const ap2wbmcu_parents[] = {
-+ "clkxtal",
-+ "syspll1_d2",
-+ "univ48m",
-+ "syspll1_d8",
-+ "univpll2_d4",
-+ "syspll_d7",
-+ "syspll2_d2",
-+ "univpll2_d2"
-+};
-+
-+static const char * const audio_parents[] = {
-+ "clkxtal",
-+ "syspll3_d4",
-+ "syspll4_d4",
-+ "syspll1_d16"
-+};
-+
-+static const char * const aud_intbus_parents[] = {
-+ "clkxtal",
-+ "syspll1_d4",
-+ "syspll4_d2",
-+ "dmpll_d4"
-+};
-+
-+static const char * const pmicspi_parents[] = {
-+ "clkxtal",
-+ "syspll1_d8",
-+ "syspll3_d4",
-+ "syspll1_d16",
-+ "univpll3_d4",
-+ "clkxtal",
-+ "univpll2_d4",
-+ "dmpll_d8"
-+};
-+
-+static const char * const scp_parents[] = {
-+ "clkxtal",
-+ "syspll1_d8",
-+ "univpll2_d2",
-+ "univpll2_d4"
-+};
-+
-+static const char * const atb_parents[] = {
-+ "clkxtal",
-+ "syspll1_d2",
-+ "syspll_d5"
-+};
-+
-+static const char * const hif_parents[] = {
-+ "clkxtal",
-+ "syspll1_d2",
-+ "univpll1_d2",
-+ "syspll1_d4",
-+ "univpll_d5",
-+ "clk_null",
-+ "univpll_d7"
-+};
-+
-+static const char * const sata_parents[] = {
-+ "clkxtal",
-+ "univpll2_d4"
-+};
-+
-+static const char * const usb20_parents[] = {
-+ "clkxtal",
-+ "univpll3_d4",
-+ "syspll1_d8"
-+};
-+
-+static const char * const aud1_parents[] = {
-+ "clkxtal"
-+};
-+
-+static const char * const irrx_parents[] = {
-+ "clkxtal",
-+ "syspll4_d16"
-+};
-+
-+static const char * const crypto_parents[] = {
-+ "clkxtal",
-+ "univpll_d3",
-+ "univpll1_d2",
-+ "syspll1_d2",
-+ "univpll_d5",
-+ "syspll_d5",
-+ "univpll2_d2",
-+ "syspll_d2"
-+};
-+
-+static const char * const gpt10m_parents[] = {
-+ "clkxtal",
-+ "clkxtal_d4"
-+};
-+
-+static const char * const peribus_ck_parents[] = {
-+ "syspll1_d8",
-+ "syspll1_d4"
-+};
-+
-+static const char * const infra_mux1_parents[] = {
-+ "clkxtal",
-+ "armpll",
-+ "main_core_en",
-+ "armpll"
-+};
-+
-+static const struct mtk_gate_regs apmixed_cg_regs = {
-+ .set_ofs = 0x8,
-+ .clr_ofs = 0x8,
-+ .sta_ofs = 0x8,
-+};
-+
-+static const struct mtk_gate_regs infra_cg_regs = {
-+ .set_ofs = 0x40,
-+ .clr_ofs = 0x44,
-+ .sta_ofs = 0x48,
-+};
-+
-+static const struct mtk_gate_regs peri0_cg_regs = {
-+ .set_ofs = 0x8,
-+ .clr_ofs = 0x10,
-+ .sta_ofs = 0x18,
-+};
-+
-+static const struct mtk_gate_regs peri1_cg_regs = {
-+ .set_ofs = 0xC,
-+ .clr_ofs = 0x14,
-+ .sta_ofs = 0x1C,
-+};
-+
-+static const struct mtk_pll_data plls[] = {
-+ PLL(CLK_APMIXED_ARMPLL, "armpll", 0x0200, 0x020C, 0x00000001,
-+ 0, 21, 0x0204, 24, 0, 0x0204, 0),
-+ PLL(CLK_APMIXED_MAINPLL, "mainpll", 0x0210, 0x021C, 0x00000001,
-+ HAVE_RST_BAR, 21, 0x0214, 24, 0, 0x0214, 0),
-+ PLL(CLK_APMIXED_UNIV2PLL, "univ2pll", 0x0220, 0x022C, 0x00000001,
-+ HAVE_RST_BAR, 7, 0x0224, 24, 0, 0x0224, 14),
-+ PLL(CLK_APMIXED_ETH1PLL, "eth1pll", 0x0300, 0x0310, 0x00000001,
-+ 0, 21, 0x0300, 1, 0, 0x0304, 0),
-+ PLL(CLK_APMIXED_ETH2PLL, "eth2pll", 0x0314, 0x0320, 0x00000001,
-+ 0, 21, 0x0314, 1, 0, 0x0318, 0),
-+ PLL(CLK_APMIXED_SGMIPLL, "sgmipll", 0x0358, 0x0368, 0x00000001,
-+ 0, 21, 0x0358, 1, 0, 0x035C, 0),
-+};
-+
-+static const struct mtk_gate apmixed_clks[] = {
-+ GATE_APMIXED(CLK_APMIXED_MAIN_CORE_EN, "main_core_en", "mainpll", 5),
-+};
-+
-+static const struct mtk_gate infra_clks[] = {
-+ GATE_INFRA(CLK_INFRA_DBGCLK_PD, "infra_dbgclk_pd", "hd_faxi", 0),
-+ GATE_INFRA(CLK_INFRA_TRNG_PD, "infra_trng_pd", "hd_faxi", 2),
-+ GATE_INFRA(CLK_INFRA_DEVAPC_PD, "infra_devapc_pd", "hd_faxi", 4),
-+ GATE_INFRA(CLK_INFRA_APXGPT_PD, "infra_apxgpt_pd", "infrao_10m", 18),
-+ GATE_INFRA(CLK_INFRA_SEJ_PD, "infra_sej_pd", "infrao_10m", 19),
-+};
-+
-+static const struct mtk_fixed_clk top_fixed_clks[] = {
-+ FIXED_CLK(CLK_TOP_TO_U2_PHY, "to_u2_phy", "clkxtal",
-+ 31250000),
-+ FIXED_CLK(CLK_TOP_TO_U2_PHY_1P, "to_u2_phy_1p", "clkxtal",
-+ 31250000),
-+ FIXED_CLK(CLK_TOP_PCIE0_PIPE_EN, "pcie0_pipe_en", "clkxtal",
-+ 125000000),
-+ FIXED_CLK(CLK_TOP_PCIE1_PIPE_EN, "pcie1_pipe_en", "clkxtal",
-+ 125000000),
-+ FIXED_CLK(CLK_TOP_SSUSB_TX250M, "ssusb_tx250m", "clkxtal",
-+ 250000000),
-+ FIXED_CLK(CLK_TOP_SSUSB_EQ_RX250M, "ssusb_eq_rx250m", "clkxtal",
-+ 250000000),
-+ FIXED_CLK(CLK_TOP_SSUSB_CDR_REF, "ssusb_cdr_ref", "clkxtal",
-+ 33333333),
-+ FIXED_CLK(CLK_TOP_SSUSB_CDR_FB, "ssusb_cdr_fb", "clkxtal",
-+ 50000000),
-+ FIXED_CLK(CLK_TOP_SATA_ASIC, "sata_asic", "clkxtal",
-+ 50000000),
-+ FIXED_CLK(CLK_TOP_SATA_RBC, "sata_rbc", "clkxtal",
-+ 50000000),
-+};
-+
-+static const struct mtk_fixed_factor top_divs[] = {
-+ FACTOR(CLK_TOP_TO_USB3_SYS, "to_usb3_sys", "eth1pll", 1, 4),
-+ FACTOR(CLK_TOP_P1_1MHZ, "p1_1mhz", "eth1pll", 1, 500),
-+ FACTOR(CLK_TOP_4MHZ, "free_run_4mhz", "eth1pll", 1, 125),
-+ FACTOR(CLK_TOP_P0_1MHZ, "p0_1mhz", "eth1pll", 1, 500),
-+ FACTOR(CLK_TOP_ETH_500M, "eth_500m", "eth1pll", 1, 1),
-+ FACTOR(CLK_TOP_TXCLK_SRC_PRE, "txclk_src_pre", "sgmiipll_d2", 1, 1),
-+ FACTOR(CLK_TOP_RTC, "rtc", "clkxtal", 1, 1024),
-+ FACTOR(CLK_TOP_PWM_QTR_26M, "pwm_qtr_26m", "clkxtal", 1, 1),
-+ FACTOR(CLK_TOP_CPUM_TCK_IN, "cpum_tck_in", "cpum_tck", 1, 1),
-+ FACTOR(CLK_TOP_TO_USB3_DA_TOP, "to_usb3_da_top", "clkxtal", 1, 1),
-+ FACTOR(CLK_TOP_MEMPLL, "mempll", "clkxtal", 32, 1),
-+ FACTOR(CLK_TOP_DMPLL, "dmpll_ck", "mempll", 1, 1),
-+ FACTOR(CLK_TOP_DMPLL_D4, "dmpll_d4", "mempll", 1, 4),
-+ FACTOR(CLK_TOP_DMPLL_D8, "dmpll_d8", "mempll", 1, 8),
-+ FACTOR(CLK_TOP_SYSPLL_D2, "syspll_d2", "mainpll", 1, 2),
-+ FACTOR(CLK_TOP_SYSPLL1_D2, "syspll1_d2", "mainpll", 1, 4),
-+ FACTOR(CLK_TOP_SYSPLL1_D4, "syspll1_d4", "mainpll", 1, 8),
-+ FACTOR(CLK_TOP_SYSPLL1_D8, "syspll1_d8", "mainpll", 1, 16),
-+ FACTOR(CLK_TOP_SYSPLL1_D16, "syspll1_d16", "mainpll", 1, 32),
-+ FACTOR(CLK_TOP_SYSPLL2_D2, "syspll2_d2", "mainpll", 1, 6),
-+ FACTOR(CLK_TOP_SYSPLL2_D4, "syspll2_d4", "mainpll", 1, 12),
-+ FACTOR(CLK_TOP_SYSPLL2_D8, "syspll2_d8", "mainpll", 1, 24),
-+ FACTOR(CLK_TOP_SYSPLL_D5, "syspll_d5", "mainpll", 1, 5),
-+ FACTOR(CLK_TOP_SYSPLL3_D2, "syspll3_d2", "mainpll", 1, 10),
-+ FACTOR(CLK_TOP_SYSPLL3_D4, "syspll3_d4", "mainpll", 1, 20),
-+ FACTOR(CLK_TOP_SYSPLL_D7, "syspll_d7", "mainpll", 1, 7),
-+ FACTOR(CLK_TOP_SYSPLL4_D2, "syspll4_d2", "mainpll", 1, 14),
-+ FACTOR(CLK_TOP_SYSPLL4_D4, "syspll4_d4", "mainpll", 1, 28),
-+ FACTOR(CLK_TOP_SYSPLL4_D16, "syspll4_d16", "mainpll", 1, 112),
-+ FACTOR(CLK_TOP_UNIVPLL, "univpll", "univ2pll", 1, 2),
-+ FACTOR(CLK_TOP_UNIVPLL1_D2, "univpll1_d2", "univpll", 1, 4),
-+ FACTOR(CLK_TOP_UNIVPLL1_D4, "univpll1_d4", "univpll", 1, 8),
-+ FACTOR(CLK_TOP_UNIVPLL1_D8, "univpll1_d8", "univpll", 1, 16),
-+ FACTOR(CLK_TOP_UNIVPLL_D3, "univpll_d3", "univpll", 1, 3),
-+ FACTOR(CLK_TOP_UNIVPLL2_D2, "univpll2_d2", "univpll", 1, 6),
-+ FACTOR(CLK_TOP_UNIVPLL2_D4, "univpll2_d4", "univpll", 1, 12),
-+ FACTOR(CLK_TOP_UNIVPLL2_D8, "univpll2_d8", "univpll", 1, 24),
-+ FACTOR(CLK_TOP_UNIVPLL2_D16, "univpll2_d16", "univpll", 1, 48),
-+ FACTOR(CLK_TOP_UNIVPLL_D5, "univpll_d5", "univpll", 1, 5),
-+ FACTOR(CLK_TOP_UNIVPLL3_D2, "univpll3_d2", "univpll", 1, 10),
-+ FACTOR(CLK_TOP_UNIVPLL3_D4, "univpll3_d4", "univpll", 1, 20),
-+ FACTOR(CLK_TOP_UNIVPLL3_D16, "univpll3_d16", "univpll", 1, 80),
-+ FACTOR(CLK_TOP_UNIVPLL_D7, "univpll_d7", "univpll", 1, 7),
-+ FACTOR(CLK_TOP_UNIVPLL_D80_D4, "univpll_d80_d4", "univpll", 1, 320),
-+ FACTOR(CLK_TOP_UNIV48M, "univ48m", "univpll", 1, 25),
-+ FACTOR(CLK_TOP_SGMIIPLL_D2, "sgmiipll_d2", "sgmipll", 1, 2),
-+ FACTOR(CLK_TOP_CLKXTAL_D4, "clkxtal_d4", "clkxtal", 1, 4),
-+ FACTOR(CLK_TOP_HD_FAXI, "hd_faxi", "axi_sel", 1, 1),
-+ FACTOR(CLK_TOP_FAXI, "faxi", "axi_sel", 1, 1),
-+ FACTOR(CLK_TOP_F_FAUD_INTBUS, "f_faud_intbus", "aud_intbus_sel", 1, 1),
-+ FACTOR(CLK_TOP_AP2WBHIF_HCLK, "ap2wbhif_hclk", "syspll1_d8", 1, 1),
-+ FACTOR(CLK_TOP_10M_INFRAO, "infrao_10m", "gpt10m_sel", 1, 1),
-+ FACTOR(CLK_TOP_MSDC30_1, "msdc30_1", "msdc30_1_sel", 1, 1),
-+ FACTOR(CLK_TOP_SPI, "spi", "spi0_sel", 1, 1),
-+ FACTOR(CLK_TOP_SF, "sf", "nfi_infra_sel", 1, 1),
-+ FACTOR(CLK_TOP_FLASH, "flash", "flash_sel", 1, 1),
-+ FACTOR(CLK_TOP_TO_USB3_REF, "to_usb3_ref", "sata_sel", 1, 4),
-+ FACTOR(CLK_TOP_TO_USB3_MCU, "to_usb3_mcu", "axi_sel", 1, 1),
-+ FACTOR(CLK_TOP_TO_USB3_DMA, "to_usb3_dma", "hif_sel", 1, 1),
-+ FACTOR(CLK_TOP_FROM_TOP_AHB, "from_top_ahb", "axi_sel", 1, 1),
-+ FACTOR(CLK_TOP_FROM_TOP_AXI, "from_top_axi", "hif_sel", 1, 1),
-+ FACTOR(CLK_TOP_PCIE1_MAC_EN, "pcie1_mac_en", "univpll1_d4", 1, 1),
-+ FACTOR(CLK_TOP_PCIE0_MAC_EN, "pcie0_mac_en", "univpll1_d4", 1, 1),
-+};
-+
-+static const struct mtk_gate peri_clks[] = {
-+ /* PERI0 */
-+ GATE_PERI0(CLK_PERI_PWM1_PD, "peri_pwm1_pd", "pwm_qtr_26m", 2),
-+ GATE_PERI0(CLK_PERI_PWM2_PD, "peri_pwm2_pd", "pwm_qtr_26m", 3),
-+ GATE_PERI0(CLK_PERI_PWM3_PD, "peri_pwm3_pd", "pwm_qtr_26m", 4),
-+ GATE_PERI0(CLK_PERI_PWM4_PD, "peri_pwm4_pd", "pwm_qtr_26m", 5),
-+ GATE_PERI0(CLK_PERI_PWM5_PD, "peri_pwm5_pd", "pwm_qtr_26m", 6),
-+ GATE_PERI0(CLK_PERI_PWM6_PD, "peri_pwm6_pd", "pwm_qtr_26m", 7),
-+ GATE_PERI0(CLK_PERI_PWM7_PD, "peri_pwm7_pd", "pwm_qtr_26m", 8),
-+ GATE_PERI0(CLK_PERI_PWM_PD, "peri_pwm_pd", "pwm_qtr_26m", 9),
-+ GATE_PERI0(CLK_PERI_AP_DMA_PD, "peri_ap_dma_pd", "faxi", 12),
-+ GATE_PERI0(CLK_PERI_MSDC30_1_PD, "peri_msdc30_1", "msdc30_1", 14),
-+ GATE_PERI0(CLK_PERI_UART0_PD, "peri_uart0_pd", "faxi", 17),
-+ GATE_PERI0(CLK_PERI_UART1_PD, "peri_uart1_pd", "faxi", 18),
-+ GATE_PERI0(CLK_PERI_UART2_PD, "peri_uart2_pd", "faxi", 19),
-+ GATE_PERI0(CLK_PERI_UART3_PD, "peri_uart3_pd", "faxi", 20),
-+ GATE_PERI0(CLK_PERI_BTIF_PD, "peri_btif_pd", "faxi", 22),
-+ GATE_PERI0(CLK_PERI_I2C0_PD, "peri_i2c0_pd", "faxi", 23),
-+ GATE_PERI0(CLK_PERI_SPI0_PD, "peri_spi0_pd", "spi", 28),
-+ GATE_PERI0(CLK_PERI_SNFI_PD, "peri_snfi_pd", "sf", 29),
-+ GATE_PERI0(CLK_PERI_NFI_PD, "peri_nfi_pd", "faxi", 30),
-+ GATE_PERI0(CLK_PERI_NFIECC_PD, "peri_nfiecc_pd", "faxi", 31),
-+ /* PERI1 */
-+ GATE_PERI1(CLK_PERI_FLASH_PD, "peri_flash_pd", "flash", 1),
-+};
-+
-+static struct mtk_composite infra_muxes[] = {
-+ /* INFRA_TOPCKGEN_CKMUXSEL */
-+ MUX(CLK_INFRA_MUX1_SEL, "infra_mux1_sel", infra_mux1_parents, 0x000,
-+ 2, 2),
-+};
-+
-+static struct mtk_composite top_muxes[] = {
-+ /* CLK_CFG_0 */
-+ MUX_GATE(CLK_TOP_AXI_SEL, "axi_sel", axi_parents,
-+ 0x040, 0, 3, 7),
-+ MUX_GATE(CLK_TOP_MEM_SEL, "mem_sel", mem_parents,
-+ 0x040, 8, 1, 15),
-+ MUX_GATE(CLK_TOP_DDRPHYCFG_SEL, "ddrphycfg_sel", ddrphycfg_parents,
-+ 0x040, 16, 1, 23),
-+ MUX_GATE(CLK_TOP_ETH_SEL, "eth_sel", eth_parents,
-+ 0x040, 24, 3, 31),
-+ /* CLK_CFG_1 */
-+ MUX_GATE(CLK_TOP_PWM_SEL, "pwm_sel", pwm_parents,
-+ 0x050, 0, 2, 7),
-+ MUX_GATE(CLK_TOP_F10M_REF_SEL, "f10m_ref_sel", f10m_ref_parents,
-+ 0x050, 8, 1, 15),
-+ MUX_GATE(CLK_TOP_NFI_INFRA_SEL, "nfi_infra_sel", nfi_infra_parents,
-+ 0x050, 16, 4, 23),
-+ MUX_GATE(CLK_TOP_FLASH_SEL, "flash_sel", flash_parents,
-+ 0x050, 24, 3, 31),
-+ /* CLK_CFG_2 */
-+ MUX_GATE(CLK_TOP_UART_SEL, "uart_sel", uart_parents,
-+ 0x060, 0, 1, 7),
-+ MUX_GATE(CLK_TOP_SPI0_SEL, "spi0_sel", spi0_parents,
-+ 0x060, 8, 3, 15),
-+ MUX_GATE(CLK_TOP_SPI1_SEL, "spi1_sel", spi1_parents,
-+ 0x060, 16, 3, 23),
-+ MUX_GATE(CLK_TOP_MSDC50_0_SEL, "msdc50_0_sel", uart_parents,
-+ 0x060, 24, 3, 31),
-+ /* CLK_CFG_3 */
-+ MUX_GATE(CLK_TOP_MSDC30_0_SEL, "msdc30_0_sel", msdc30_0_parents,
-+ 0x070, 0, 3, 7),
-+ MUX_GATE(CLK_TOP_MSDC30_1_SEL, "msdc30_1_sel", msdc30_1_parents,
-+ 0x070, 8, 3, 15),
-+ MUX_GATE(CLK_TOP_AP2WBMCU_SEL, "ap2wbmcu_sel", ap2wbmcu_parents,
-+ 0x070, 16, 3, 23),
-+ MUX_GATE(CLK_TOP_AP2WBHIF_SEL, "ap2wbhif_sel", ap2wbmcu_parents,
-+ 0x070, 24, 3, 31),
-+ /* CLK_CFG_4 */
-+ MUX_GATE(CLK_TOP_AUDIO_SEL, "audio_sel", audio_parents,
-+ 0x080, 0, 2, 7),
-+ MUX_GATE(CLK_TOP_AUD_INTBUS_SEL, "aud_intbus_sel", aud_intbus_parents,
-+ 0x080, 8, 2, 15),
-+ MUX_GATE(CLK_TOP_PMICSPI_SEL, "pmicspi_sel", pmicspi_parents,
-+ 0x080, 16, 3, 23),
-+ MUX_GATE(CLK_TOP_SCP_SEL, "scp_sel", scp_parents,
-+ 0x080, 24, 2, 31),
-+ /* CLK_CFG_5 */
-+ MUX_GATE(CLK_TOP_ATB_SEL, "atb_sel", atb_parents,
-+ 0x090, 0, 2, 7),
-+ MUX_GATE(CLK_TOP_HIF_SEL, "hif_sel", hif_parents,
-+ 0x090, 8, 3, 15),
-+ MUX_GATE(CLK_TOP_SATA_SEL, "sata_sel", sata_parents,
-+ 0x090, 16, 1, 23),
-+ MUX_GATE(CLK_TOP_U2_SEL, "usb20_sel", usb20_parents,
-+ 0x090, 24, 2, 31),
-+ /* CLK_CFG_6 */
-+ MUX_GATE(CLK_TOP_AUD1_SEL, "aud1_sel", aud1_parents,
-+ 0x0A0, 0, 1, 7),
-+ MUX_GATE(CLK_TOP_AUD2_SEL, "aud2_sel", aud1_parents,
-+ 0x0A0, 8, 1, 15),
-+ MUX_GATE(CLK_TOP_IRRX_SEL, "irrx_sel", irrx_parents,
-+ 0x0A0, 16, 1, 23),
-+ MUX_GATE(CLK_TOP_IRTX_SEL, "irtx_sel", irrx_parents,
-+ 0x0A0, 24, 1, 31),
-+ /* CLK_CFG_7 */
-+ MUX_GATE(CLK_TOP_SATA_MCU_SEL, "sata_mcu_sel", scp_parents,
-+ 0x0B0, 0, 2, 7),
-+ MUX_GATE(CLK_TOP_PCIE0_MCU_SEL, "pcie0_mcu_sel", scp_parents,
-+ 0x0B0, 8, 2, 15),
-+ MUX_GATE(CLK_TOP_PCIE1_MCU_SEL, "pcie1_mcu_sel", scp_parents,
-+ 0x0B0, 16, 2, 23),
-+ MUX_GATE(CLK_TOP_SSUSB_MCU_SEL, "ssusb_mcu_sel", scp_parents,
-+ 0x0B0, 24, 2, 31),
-+ /* CLK_CFG_8 */
-+ MUX_GATE(CLK_TOP_CRYPTO_SEL, "crypto_sel", crypto_parents,
-+ 0x0C0, 0, 3, 7),
-+ MUX_GATE(CLK_TOP_SGMII_REF_1_SEL, "sgmii_ref_1_sel", f10m_ref_parents,
-+ 0x0C0, 8, 1, 15),
-+ MUX_GATE(CLK_TOP_10M_SEL, "gpt10m_sel", gpt10m_parents,
-+ 0x0C0, 16, 1, 23),
-+};
-+
-+static struct mtk_composite peri_muxes[] = {
-+ /* PERI_GLOBALCON_CKSEL */
-+ MUX(CLK_PERIBUS_SEL, "peribus_ck_sel", peribus_ck_parents, 0x05C, 0, 1),
-+};
-+
-+static int mtk_topckgen_init(struct platform_device *pdev)
-+{
-+ struct clk_onecell_data *clk_data;
-+ void __iomem *base;
-+ struct device_node *node = pdev->dev.of_node;
-+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+
-+ base = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(base))
-+ return PTR_ERR(base);
-+
-+ clk_data = mtk_alloc_clk_data(CLK_TOP_NR_CLK);
-+
-+ mtk_clk_register_fixed_clks(top_fixed_clks, ARRAY_SIZE(top_fixed_clks),
-+ clk_data);
-+
-+ mtk_clk_register_factors(top_divs, ARRAY_SIZE(top_divs),
-+ clk_data);
-+
-+ mtk_clk_register_composites(top_muxes, ARRAY_SIZE(top_muxes),
-+ base, &mt7629_clk_lock, clk_data);
-+
-+ clk_prepare_enable(clk_data->clks[CLK_TOP_AXI_SEL]);
-+ clk_prepare_enable(clk_data->clks[CLK_TOP_MEM_SEL]);
-+ clk_prepare_enable(clk_data->clks[CLK_TOP_DDRPHYCFG_SEL]);
-+
-+ return of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
-+}
-+
-+static int mtk_infrasys_init(struct platform_device *pdev)
-+{
-+ struct device_node *node = pdev->dev.of_node;
-+ struct clk_onecell_data *clk_data;
-+ int r;
-+
-+ clk_data = mtk_alloc_clk_data(CLK_INFRA_NR_CLK);
-+
-+ mtk_clk_register_gates(node, infra_clks, ARRAY_SIZE(infra_clks),
-+ clk_data);
-+
-+ mtk_clk_register_cpumuxes(node, infra_muxes, ARRAY_SIZE(infra_muxes),
-+ clk_data);
-+
-+ r = of_clk_add_provider(node, of_clk_src_onecell_get,
-+ clk_data);
-+ if (r)
-+ return r;
-+
-+ return 0;
-+}
-+
-+static int mtk_pericfg_init(struct platform_device *pdev)
-+{
-+ struct clk_onecell_data *clk_data;
-+ void __iomem *base;
-+ int r;
-+ struct device_node *node = pdev->dev.of_node;
-+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+
-+ base = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(base))
-+ return PTR_ERR(base);
-+
-+ clk_data = mtk_alloc_clk_data(CLK_PERI_NR_CLK);
-+
-+ mtk_clk_register_gates(node, peri_clks, ARRAY_SIZE(peri_clks),
-+ clk_data);
-+
-+ mtk_clk_register_composites(peri_muxes, ARRAY_SIZE(peri_muxes), base,
-+ &mt7629_clk_lock, clk_data);
-+
-+ r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
-+ if (r)
-+ return r;
-+
-+ clk_prepare_enable(clk_data->clks[CLK_PERI_UART0_PD]);
-+
-+ return 0;
-+}
-+
-+static int mtk_apmixedsys_init(struct platform_device *pdev)
-+{
-+ struct clk_onecell_data *clk_data;
-+ struct device_node *node = pdev->dev.of_node;
-+
-+ clk_data = mtk_alloc_clk_data(CLK_APMIXED_NR_CLK);
-+ if (!clk_data)
-+ return -ENOMEM;
-+
-+ mtk_clk_register_plls(node, plls, ARRAY_SIZE(plls),
-+ clk_data);
-+
-+ mtk_clk_register_gates(node, apmixed_clks,
-+ ARRAY_SIZE(apmixed_clks), clk_data);
-+
-+ clk_prepare_enable(clk_data->clks[CLK_APMIXED_ARMPLL]);
-+ clk_prepare_enable(clk_data->clks[CLK_APMIXED_MAIN_CORE_EN]);
-+
-+ return of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
-+}
-+
-+
-+static const struct of_device_id of_match_clk_mt7629[] = {
-+ {
-+ .compatible = "mediatek,mt7629-apmixedsys",
-+ .data = mtk_apmixedsys_init,
-+ }, {
-+ .compatible = "mediatek,mt7629-infracfg",
-+ .data = mtk_infrasys_init,
-+ }, {
-+ .compatible = "mediatek,mt7629-topckgen",
-+ .data = mtk_topckgen_init,
-+ }, {
-+ .compatible = "mediatek,mt7629-pericfg",
-+ .data = mtk_pericfg_init,
-+ }, {
-+ /* sentinel */
-+ }
-+};
-+
-+static int clk_mt7629_probe(struct platform_device *pdev)
-+{
-+ int (*clk_init)(struct platform_device *);
-+ int r;
-+
-+ clk_init = of_device_get_match_data(&pdev->dev);
-+ if (!clk_init)
-+ return -EINVAL;
-+
-+ r = clk_init(pdev);
-+ if (r)
-+ dev_err(&pdev->dev,
-+ "could not register clock provider: %s: %d\n",
-+ pdev->name, r);
-+
-+ return r;
-+}
-+
-+static struct platform_driver clk_mt7629_drv = {
-+ .probe = clk_mt7629_probe,
-+ .driver = {
-+ .name = "clk-mt7629",
-+ .of_match_table = of_match_clk_mt7629,
-+ },
-+};
-+
-+static int clk_mt7629_init(void)
-+{
-+ return platform_driver_register(&clk_mt7629_drv);
-+}
-+
-+arch_initcall(clk_mt7629_init);
---- /dev/null
-+++ b/include/dt-bindings/clock/mt7629-clk.h
-@@ -0,0 +1,203 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+/*
-+ * Copyright (C) 2018 MediaTek Inc.
-+ */
-+
-+#ifndef _DT_BINDINGS_CLK_MT7629_H
-+#define _DT_BINDINGS_CLK_MT7629_H
-+
-+/* TOPCKGEN */
-+#define CLK_TOP_TO_U2_PHY 0
-+#define CLK_TOP_TO_U2_PHY_1P 1
-+#define CLK_TOP_PCIE0_PIPE_EN 2
-+#define CLK_TOP_PCIE1_PIPE_EN 3
-+#define CLK_TOP_SSUSB_TX250M 4
-+#define CLK_TOP_SSUSB_EQ_RX250M 5
-+#define CLK_TOP_SSUSB_CDR_REF 6
-+#define CLK_TOP_SSUSB_CDR_FB 7
-+#define CLK_TOP_SATA_ASIC 8
-+#define CLK_TOP_SATA_RBC 9
-+#define CLK_TOP_TO_USB3_SYS 10
-+#define CLK_TOP_P1_1MHZ 11
-+#define CLK_TOP_4MHZ 12
-+#define CLK_TOP_P0_1MHZ 13
-+#define CLK_TOP_ETH_500M 14
-+#define CLK_TOP_TXCLK_SRC_PRE 15
-+#define CLK_TOP_RTC 16
-+#define CLK_TOP_PWM_QTR_26M 17
-+#define CLK_TOP_CPUM_TCK_IN 18
-+#define CLK_TOP_TO_USB3_DA_TOP 19
-+#define CLK_TOP_MEMPLL 20
-+#define CLK_TOP_DMPLL 21
-+#define CLK_TOP_DMPLL_D4 22
-+#define CLK_TOP_DMPLL_D8 23
-+#define CLK_TOP_SYSPLL_D2 24
-+#define CLK_TOP_SYSPLL1_D2 25
-+#define CLK_TOP_SYSPLL1_D4 26
-+#define CLK_TOP_SYSPLL1_D8 27
-+#define CLK_TOP_SYSPLL1_D16 28
-+#define CLK_TOP_SYSPLL2_D2 29
-+#define CLK_TOP_SYSPLL2_D4 30
-+#define CLK_TOP_SYSPLL2_D8 31
-+#define CLK_TOP_SYSPLL_D5 32
-+#define CLK_TOP_SYSPLL3_D2 33
-+#define CLK_TOP_SYSPLL3_D4 34
-+#define CLK_TOP_SYSPLL_D7 35
-+#define CLK_TOP_SYSPLL4_D2 36
-+#define CLK_TOP_SYSPLL4_D4 37
-+#define CLK_TOP_SYSPLL4_D16 38
-+#define CLK_TOP_UNIVPLL 39
-+#define CLK_TOP_UNIVPLL1_D2 40
-+#define CLK_TOP_UNIVPLL1_D4 41
-+#define CLK_TOP_UNIVPLL1_D8 42
-+#define CLK_TOP_UNIVPLL_D3 43
-+#define CLK_TOP_UNIVPLL2_D2 44
-+#define CLK_TOP_UNIVPLL2_D4 45
-+#define CLK_TOP_UNIVPLL2_D8 46
-+#define CLK_TOP_UNIVPLL2_D16 47
-+#define CLK_TOP_UNIVPLL_D5 48
-+#define CLK_TOP_UNIVPLL3_D2 49
-+#define CLK_TOP_UNIVPLL3_D4 50
-+#define CLK_TOP_UNIVPLL3_D16 51
-+#define CLK_TOP_UNIVPLL_D7 52
-+#define CLK_TOP_UNIVPLL_D80_D4 53
-+#define CLK_TOP_UNIV48M 54
-+#define CLK_TOP_SGMIIPLL_D2 55
-+#define CLK_TOP_CLKXTAL_D4 56
-+#define CLK_TOP_HD_FAXI 57
-+#define CLK_TOP_FAXI 58
-+#define CLK_TOP_F_FAUD_INTBUS 59
-+#define CLK_TOP_AP2WBHIF_HCLK 60
-+#define CLK_TOP_10M_INFRAO 61
-+#define CLK_TOP_MSDC30_1 62
-+#define CLK_TOP_SPI 63
-+#define CLK_TOP_SF 64
-+#define CLK_TOP_FLASH 65
-+#define CLK_TOP_TO_USB3_REF 66
-+#define CLK_TOP_TO_USB3_MCU 67
-+#define CLK_TOP_TO_USB3_DMA 68
-+#define CLK_TOP_FROM_TOP_AHB 69
-+#define CLK_TOP_FROM_TOP_AXI 70
-+#define CLK_TOP_PCIE1_MAC_EN 71
-+#define CLK_TOP_PCIE0_MAC_EN 72
-+#define CLK_TOP_AXI_SEL 73
-+#define CLK_TOP_MEM_SEL 74
-+#define CLK_TOP_DDRPHYCFG_SEL 75
-+#define CLK_TOP_ETH_SEL 76
-+#define CLK_TOP_PWM_SEL 77
-+#define CLK_TOP_F10M_REF_SEL 78
-+#define CLK_TOP_NFI_INFRA_SEL 79
-+#define CLK_TOP_FLASH_SEL 80
-+#define CLK_TOP_UART_SEL 81
-+#define CLK_TOP_SPI0_SEL 82
-+#define CLK_TOP_SPI1_SEL 83
-+#define CLK_TOP_MSDC50_0_SEL 84
-+#define CLK_TOP_MSDC30_0_SEL 85
-+#define CLK_TOP_MSDC30_1_SEL 86
-+#define CLK_TOP_AP2WBMCU_SEL 87
-+#define CLK_TOP_AP2WBHIF_SEL 88
-+#define CLK_TOP_AUDIO_SEL 89
-+#define CLK_TOP_AUD_INTBUS_SEL 90
-+#define CLK_TOP_PMICSPI_SEL 91
-+#define CLK_TOP_SCP_SEL 92
-+#define CLK_TOP_ATB_SEL 93
-+#define CLK_TOP_HIF_SEL 94
-+#define CLK_TOP_SATA_SEL 95
-+#define CLK_TOP_U2_SEL 96
-+#define CLK_TOP_AUD1_SEL 97
-+#define CLK_TOP_AUD2_SEL 98
-+#define CLK_TOP_IRRX_SEL 99
-+#define CLK_TOP_IRTX_SEL 100
-+#define CLK_TOP_SATA_MCU_SEL 101
-+#define CLK_TOP_PCIE0_MCU_SEL 102
-+#define CLK_TOP_PCIE1_MCU_SEL 103
-+#define CLK_TOP_SSUSB_MCU_SEL 104
-+#define CLK_TOP_CRYPTO_SEL 105
-+#define CLK_TOP_SGMII_REF_1_SEL 106
-+#define CLK_TOP_10M_SEL 107
-+#define CLK_TOP_NR_CLK 108
-+
-+/* INFRACFG */
-+#define CLK_INFRA_MUX1_SEL 0
-+#define CLK_INFRA_DBGCLK_PD 1
-+#define CLK_INFRA_TRNG_PD 2
-+#define CLK_INFRA_DEVAPC_PD 3
-+#define CLK_INFRA_APXGPT_PD 4
-+#define CLK_INFRA_SEJ_PD 5
-+#define CLK_INFRA_NR_CLK 6
-+
-+/* PERICFG */
-+#define CLK_PERIBUS_SEL 0
-+#define CLK_PERI_PWM1_PD 1
-+#define CLK_PERI_PWM2_PD 2
-+#define CLK_PERI_PWM3_PD 3
-+#define CLK_PERI_PWM4_PD 4
-+#define CLK_PERI_PWM5_PD 5
-+#define CLK_PERI_PWM6_PD 6
-+#define CLK_PERI_PWM7_PD 7
-+#define CLK_PERI_PWM_PD 8
-+#define CLK_PERI_AP_DMA_PD 9
-+#define CLK_PERI_MSDC30_1_PD 10
-+#define CLK_PERI_UART0_PD 11
-+#define CLK_PERI_UART1_PD 12
-+#define CLK_PERI_UART2_PD 13
-+#define CLK_PERI_UART3_PD 14
-+#define CLK_PERI_BTIF_PD 15
-+#define CLK_PERI_I2C0_PD 16
-+#define CLK_PERI_SPI0_PD 17
-+#define CLK_PERI_SNFI_PD 18
-+#define CLK_PERI_NFI_PD 19
-+#define CLK_PERI_NFIECC_PD 20
-+#define CLK_PERI_FLASH_PD 21
-+#define CLK_PERI_NR_CLK 22
-+
-+/* APMIXEDSYS */
-+#define CLK_APMIXED_ARMPLL 0
-+#define CLK_APMIXED_MAINPLL 1
-+#define CLK_APMIXED_UNIV2PLL 2
-+#define CLK_APMIXED_ETH1PLL 3
-+#define CLK_APMIXED_ETH2PLL 4
-+#define CLK_APMIXED_SGMIPLL 5
-+#define CLK_APMIXED_MAIN_CORE_EN 6
-+#define CLK_APMIXED_NR_CLK 7
-+
-+/* SSUSBSYS */
-+#define CLK_SSUSB_U2_PHY_1P_EN 0
-+#define CLK_SSUSB_U2_PHY_EN 1
-+#define CLK_SSUSB_REF_EN 2
-+#define CLK_SSUSB_SYS_EN 3
-+#define CLK_SSUSB_MCU_EN 4
-+#define CLK_SSUSB_DMA_EN 5
-+#define CLK_SSUSB_NR_CLK 6
-+
-+/* PCIESYS */
-+#define CLK_PCIE_P1_AUX_EN 0
-+#define CLK_PCIE_P1_OBFF_EN 1
-+#define CLK_PCIE_P1_AHB_EN 2
-+#define CLK_PCIE_P1_AXI_EN 3
-+#define CLK_PCIE_P1_MAC_EN 4
-+#define CLK_PCIE_P1_PIPE_EN 5
-+#define CLK_PCIE_P0_AUX_EN 6
-+#define CLK_PCIE_P0_OBFF_EN 7
-+#define CLK_PCIE_P0_AHB_EN 8
-+#define CLK_PCIE_P0_AXI_EN 9
-+#define CLK_PCIE_P0_MAC_EN 10
-+#define CLK_PCIE_P0_PIPE_EN 11
-+#define CLK_PCIE_NR_CLK 12
-+
-+/* ETHSYS */
-+#define CLK_ETH_FE_EN 0
-+#define CLK_ETH_GP2_EN 1
-+#define CLK_ETH_GP1_EN 2
-+#define CLK_ETH_GP0_EN 3
-+#define CLK_ETH_ESW_EN 4
-+#define CLK_ETH_NR_CLK 5
-+
-+/* SGMIISYS */
-+#define CLK_SGMII_TX_EN 0
-+#define CLK_SGMII_RX_EN 1
-+#define CLK_SGMII_CDR_REF 2
-+#define CLK_SGMII_CDR_FB 3
-+#define CLK_SGMII_NR_CLK 4
-+
-+#endif /* _DT_BINDINGS_CLK_MT7629_H */
+++ /dev/null
-This patch squashes the following upstream commits:
-
-5ca1b1c5cd98 pinctrl: mediatek: mt8183: Add pm_ops
-5c0904488a20 pinctrl: mediatek: Add pm_ops to pinctrl-paris
-1802d0beecaf treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174
-ec8f24b7faaf treewide: Add SPDX license identifier - Makefile/Kconfig
-264667112ef0 pinctrl: mediatek: Add MT8516 Pinctrl driver
-5e73de3413c5 pinctrl: add drive for I2C related pins on MT8183
-e65372124cd7 Merge tag 'v5.0-rc6' into devel
-2d2d478576d7 pinctrl: mediatek: fix Kconfig build errors for moore core
-6e737a4e921e pinctrl: mediatek: add EINT support to virtual GPIOs
-b5af33df50e9 pinctrl: mediatek: improve Kconfig dependencies
-9ede2a76f66e pinctrl: mediatek: Convert to using %pOFn instead of device_node.name
-b44677375fee pinctrl: mediatek: add pinctrl support for MT7629 SoC
-f969b7aac980 pinctrl: mediatek: Add initial pinctrl driver for MT6797 SoC
-7c68024a82a2 pinctrl: mediatek: Fix dependencies for EINT_MTK
-78bf386daf8a pinctrl: mediatek: clean up indentation issues, add missing tab
-28e0603c4df4 pinctrl: mediatek: Make eint_m u16
-71a9d395aa12 pinctrl: mediatek: select GPIOLIB
-ad335bee6ced pinctrl: mediatek: mark dummy helpers as 'static inline'
-7a52127e3cf1 pinctrl: mediatek: fix check on EINT_NA comparison
-bb8d8466ca25 pinctrl: mediatek: add eint support to MT6765 pinctrl driver
-477fecee7ca9 pinctrl: mediatek: add MT6765 pinctrl driver
-ecfcfb498860 pinctrl: mediatek: add no eint function for pin define
-7f2e29e133ea pinctrl: mediatek: fix static checker warning caused by EINT_NA
-068cfb9a0fd9 pinctrl: mediatek: moore: fix return value check in mtk_moore_pinctrl_probe()
-07c6b037c2ba pinctrl: mediatek: make symbol 'mtk_drive' static
-184744e9a014 pinctrl: mediatek: paris: fix return value check in mtk_paris_pinctrl_probe()
-22d7fe4984a2 pinctrl: mtk: Fix up GPIO includes
-55818b90233b Merge branch 'ib-mtk' into devel
-6561859b067f pinctrl: mediatek: add eint support to MT8183 pinctrl driver
-89132dd8ffd2 pinctrl: mediatek: extend eint build to pinctrl-mtk-common-v2.c
-29686f0151df pintcrl: mediatek: add pull tweaks for I2C related pins on MT8183
-79348f6fb713 pinctrl: mediatek: extend advanced pull support in pinctrl-mtk-common-v2.c
-750cd15d9081 pinctrl: mediatek: add MT8183 pinctrl driver
-805250982bb5 pinctrl: mediatek: add pinctrl-paris that implements the vendor dt-bindings
-b7d7f9eeca55 pinctrl: mediatek: extend struct mtk_pin_desc which per-pin driver depends on
-9d9b171c6897 pinctrl: mediatek: adjust error code and message when some register not supported is found
-2bc47dfe4f8b pinctrl: mediatek: add multiple register bases support to pinctrl-mtk-common-v2.c
-ea051eb38413 pinctrl: mediatek: use pin descriptor all in pinctrl-mtk-common-v2.c
-e7507f57a93a pinctrl: mediatek: add MT7623 pinctrl driver based on generic pinctrl binding
-9afc305bfad7 pinctrl: mediatek: add pullen, pullsel register support to pinctrl-mtk-common-v2.c
-182c842fd5e6 pinctrl: mediatek: add ies register support to pinctrl-mtk-common-v2.c
-0d7ca772148f pinctrl: mediatek: add advanced pull related support to pinctrl-mtk-common-v2.c
-85430152ba46 pinctrl: mediatek: add pull related support to pinctrl-mtk-common-v2.c
-3ad38a14e13c pinctrl: mediatek: add drv register support to pinctrl-mtk-common-v2.c
-c28321979ba8 pinctrl: mediatek: add driving strength related support to pinctrl-mtk-common-v2.c
-1dc5e5369159 pinctrl: mediatek: extend struct mtk_pin_soc to pinctrl-mtk-common-v2.c
-fb5fa8dc151b pinctrl: mediatek: extend struct mtk_pin_desc to pinctrl-mtk-common-v2.c
-b906faf7b61d pinctrl: mediatek: extend struct mtk_pin_field_calc to pinctrl-mtk-common-v2.c
-e78d57b2f87c pinctrl: mediatek: add pinctrl-moore that implements the generic pinctrl dt-bindings
-a1a503a8c332 pinctrl: mediatek: add pinctrl-mtk-common-v2 for all MediaTek pinctrls
-1c5fb66afa2a pinctrl: Include <linux/gpio/driver.h> nothing else
-94f4e54cecaf pinctrl: Convert to using %pOFn instead of device_node.name
-
---- a/drivers/pinctrl/mediatek/Kconfig
-+++ b/drivers/pinctrl/mediatek/Kconfig
-@@ -3,7 +3,8 @@ menu "MediaTek pinctrl drivers"
-
- config EINT_MTK
- bool "MediaTek External Interrupt Support"
-- depends on PINCTRL_MTK || PINCTRL_MT7622 || COMPILE_TEST
-+ depends on PINCTRL_MTK || PINCTRL_MTK_MOORE || PINCTRL_MTK_PARIS || COMPILE_TEST
-+ select GPIOLIB
- select IRQ_DOMAIN
-
- config PINCTRL_MTK
-@@ -15,6 +16,24 @@ config PINCTRL_MTK
- select EINT_MTK
- select OF_GPIO
-
-+config PINCTRL_MTK_MOORE
-+ bool
-+ depends on OF
-+ select GENERIC_PINCONF
-+ select GENERIC_PINCTRL_GROUPS
-+ select GENERIC_PINMUX_FUNCTIONS
-+ select GPIOLIB
-+ select OF_GPIO
-+
-+config PINCTRL_MTK_PARIS
-+ bool
-+ depends on OF
-+ select PINMUX
-+ select GENERIC_PINCONF
-+ select GPIOLIB
-+ select EINT_MTK
-+ select OF_GPIO
-+
- # For ARMv7 SoCs
- config PINCTRL_MT2701
- bool "Mediatek MT2701 pin control"
-@@ -23,6 +42,20 @@ config PINCTRL_MT2701
- default MACH_MT2701
- select PINCTRL_MTK
-
-+config PINCTRL_MT7623
-+ bool "Mediatek MT7623 pin control with generic binding"
-+ depends on MACH_MT7623 || COMPILE_TEST
-+ depends on OF
-+ default MACH_MT7623
-+ select PINCTRL_MTK_MOORE
-+
-+config PINCTRL_MT7629
-+ bool "Mediatek MT7629 pin control"
-+ depends on MACH_MT7629 || COMPILE_TEST
-+ depends on OF
-+ default MACH_MT7629
-+ select PINCTRL_MTK_MOORE
-+
- config PINCTRL_MT8135
- bool "Mediatek MT8135 pin control"
- depends on MACH_MT8135 || COMPILE_TEST
-@@ -45,21 +78,46 @@ config PINCTRL_MT2712
- default ARM64 && ARCH_MEDIATEK
- select PINCTRL_MTK
-
-+config PINCTRL_MT6765
-+ bool "Mediatek MT6765 pin control"
-+ depends on OF
-+ depends on ARM64 || COMPILE_TEST
-+ default ARM64 && ARCH_MEDIATEK
-+ select PINCTRL_MTK_PARIS
-+
-+config PINCTRL_MT6797
-+ bool "Mediatek MT6797 pin control"
-+ depends on OF
-+ depends on ARM64 || COMPILE_TEST
-+ default ARM64 && ARCH_MEDIATEK
-+ select PINCTRL_MTK_PARIS
-+
- config PINCTRL_MT7622
- bool "MediaTek MT7622 pin control"
- depends on OF
- depends on ARM64 || COMPILE_TEST
-- select GENERIC_PINCONF
-- select GENERIC_PINCTRL_GROUPS
-- select GENERIC_PINMUX_FUNCTIONS
-- select GPIOLIB
-- select OF_GPIO
-+ default ARM64 && ARCH_MEDIATEK
-+ select PINCTRL_MTK_MOORE
-
- config PINCTRL_MT8173
- bool "Mediatek MT8173 pin control"
- depends on OF
- depends on ARM64 || COMPILE_TEST
- default ARM64 && ARCH_MEDIATEK
-+ select PINCTRL_MTK
-+
-+config PINCTRL_MT8183
-+ bool "Mediatek MT8183 pin control"
-+ depends on OF
-+ depends on ARM64 || COMPILE_TEST
-+ default ARM64 && ARCH_MEDIATEK
-+ select PINCTRL_MTK_PARIS
-+
-+config PINCTRL_MT8516
-+ bool "Mediatek MT8516 pin control"
-+ depends on OF
-+ depends on ARM64 || COMPILE_TEST
-+ default ARM64 && ARCH_MEDIATEK
- select PINCTRL_MTK
-
- # For PMIC
---- a/drivers/pinctrl/mediatek/Makefile
-+++ b/drivers/pinctrl/mediatek/Makefile
-@@ -2,12 +2,20 @@
- # Core
- obj-$(CONFIG_EINT_MTK) += mtk-eint.o
- obj-$(CONFIG_PINCTRL_MTK) += pinctrl-mtk-common.o
-+obj-$(CONFIG_PINCTRL_MTK_MOORE) += pinctrl-moore.o pinctrl-mtk-common-v2.o
-+obj-$(CONFIG_PINCTRL_MTK_PARIS) += pinctrl-paris.o pinctrl-mtk-common-v2.o
-
- # SoC Drivers
- obj-$(CONFIG_PINCTRL_MT2701) += pinctrl-mt2701.o
- obj-$(CONFIG_PINCTRL_MT2712) += pinctrl-mt2712.o
- obj-$(CONFIG_PINCTRL_MT8135) += pinctrl-mt8135.o
- obj-$(CONFIG_PINCTRL_MT8127) += pinctrl-mt8127.o
-+obj-$(CONFIG_PINCTRL_MT6765) += pinctrl-mt6765.o
-+obj-$(CONFIG_PINCTRL_MT6797) += pinctrl-mt6797.o
- obj-$(CONFIG_PINCTRL_MT7622) += pinctrl-mt7622.o
-+obj-$(CONFIG_PINCTRL_MT7623) += pinctrl-mt7623.o
-+obj-$(CONFIG_PINCTRL_MT7629) += pinctrl-mt7629.o
- obj-$(CONFIG_PINCTRL_MT8173) += pinctrl-mt8173.o
-+obj-$(CONFIG_PINCTRL_MT8183) += pinctrl-mt8183.o
-+obj-$(CONFIG_PINCTRL_MT8516) += pinctrl-mt8516.o
- obj-$(CONFIG_PINCTRL_MT6397) += pinctrl-mt6397.o
---- a/drivers/pinctrl/mediatek/mtk-eint.c
-+++ b/drivers/pinctrl/mediatek/mtk-eint.c
-@@ -11,7 +11,7 @@
-
- #include <linux/delay.h>
- #include <linux/err.h>
--#include <linux/gpio.h>
-+#include <linux/gpio/driver.h>
- #include <linux/io.h>
- #include <linux/irqchip/chained_irq.h>
- #include <linux/irqdomain.h>
---- a/drivers/pinctrl/mediatek/mtk-eint.h
-+++ b/drivers/pinctrl/mediatek/mtk-eint.h
-@@ -92,13 +92,13 @@ static inline int mtk_eint_do_resume(str
- return -EOPNOTSUPP;
- }
-
--int mtk_eint_set_debounce(struct mtk_eint *eint, unsigned long eint_n,
-+static inline int mtk_eint_set_debounce(struct mtk_eint *eint, unsigned long eint_n,
- unsigned int debounce)
- {
- return -EOPNOTSUPP;
- }
-
--int mtk_eint_find_irq(struct mtk_eint *eint, unsigned long eint_n)
-+static inline int mtk_eint_find_irq(struct mtk_eint *eint, unsigned long eint_n)
- {
- return -EOPNOTSUPP;
- }
---- /dev/null
-+++ b/drivers/pinctrl/mediatek/pinctrl-moore.c
-@@ -0,0 +1,690 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * MediaTek Pinctrl Moore Driver, which implement the generic dt-binding
-+ * pinctrl-bindings.txt for MediaTek SoC.
-+ *
-+ * Copyright (C) 2017-2018 MediaTek Inc.
-+ * Author: Sean Wang <sean.wang@mediatek.com>
-+ *
-+ */
-+
-+#include <linux/gpio/driver.h>
-+#include "pinctrl-moore.h"
-+
-+#define PINCTRL_PINCTRL_DEV KBUILD_MODNAME
-+
-+/* Custom pinconf parameters */
-+#define MTK_PIN_CONFIG_TDSEL (PIN_CONFIG_END + 1)
-+#define MTK_PIN_CONFIG_RDSEL (PIN_CONFIG_END + 2)
-+#define MTK_PIN_CONFIG_PU_ADV (PIN_CONFIG_END + 3)
-+#define MTK_PIN_CONFIG_PD_ADV (PIN_CONFIG_END + 4)
-+
-+static const struct pinconf_generic_params mtk_custom_bindings[] = {
-+ {"mediatek,tdsel", MTK_PIN_CONFIG_TDSEL, 0},
-+ {"mediatek,rdsel", MTK_PIN_CONFIG_RDSEL, 0},
-+ {"mediatek,pull-up-adv", MTK_PIN_CONFIG_PU_ADV, 1},
-+ {"mediatek,pull-down-adv", MTK_PIN_CONFIG_PD_ADV, 1},
-+};
-+
-+#ifdef CONFIG_DEBUG_FS
-+static const struct pin_config_item mtk_conf_items[] = {
-+ PCONFDUMP(MTK_PIN_CONFIG_TDSEL, "tdsel", NULL, true),
-+ PCONFDUMP(MTK_PIN_CONFIG_RDSEL, "rdsel", NULL, true),
-+ PCONFDUMP(MTK_PIN_CONFIG_PU_ADV, "pu-adv", NULL, true),
-+ PCONFDUMP(MTK_PIN_CONFIG_PD_ADV, "pd-adv", NULL, true),
-+};
-+#endif
-+
-+static int mtk_pinmux_set_mux(struct pinctrl_dev *pctldev,
-+ unsigned int selector, unsigned int group)
-+{
-+ struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
-+ struct function_desc *func;
-+ struct group_desc *grp;
-+ int i;
-+
-+ func = pinmux_generic_get_function(pctldev, selector);
-+ if (!func)
-+ return -EINVAL;
-+
-+ grp = pinctrl_generic_get_group(pctldev, group);
-+ if (!grp)
-+ return -EINVAL;
-+
-+ dev_dbg(pctldev->dev, "enable function %s group %s\n",
-+ func->name, grp->name);
-+
-+ for (i = 0; i < grp->num_pins; i++) {
-+ const struct mtk_pin_desc *desc;
-+ int *pin_modes = grp->data;
-+ int pin = grp->pins[i];
-+
-+ desc = (const struct mtk_pin_desc *)&hw->soc->pins[pin];
-+
-+ mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_MODE,
-+ pin_modes[i]);
-+ }
-+
-+ return 0;
-+}
-+
-+static int mtk_pinmux_gpio_request_enable(struct pinctrl_dev *pctldev,
-+ struct pinctrl_gpio_range *range,
-+ unsigned int pin)
-+{
-+ struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
-+ const struct mtk_pin_desc *desc;
-+
-+ desc = (const struct mtk_pin_desc *)&hw->soc->pins[pin];
-+
-+ return mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_MODE,
-+ hw->soc->gpio_m);
-+}
-+
-+static int mtk_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev,
-+ struct pinctrl_gpio_range *range,
-+ unsigned int pin, bool input)
-+{
-+ struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
-+ const struct mtk_pin_desc *desc;
-+
-+ desc = (const struct mtk_pin_desc *)&hw->soc->pins[pin];
-+
-+ /* hardware would take 0 as input direction */
-+ return mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR, !input);
-+}
-+
-+static int mtk_pinconf_get(struct pinctrl_dev *pctldev,
-+ unsigned int pin, unsigned long *config)
-+{
-+ struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
-+ u32 param = pinconf_to_config_param(*config);
-+ int val, val2, err, reg, ret = 1;
-+ const struct mtk_pin_desc *desc;
-+
-+ desc = (const struct mtk_pin_desc *)&hw->soc->pins[pin];
-+
-+ switch (param) {
-+ case PIN_CONFIG_BIAS_DISABLE:
-+ if (hw->soc->bias_disable_get) {
-+ err = hw->soc->bias_disable_get(hw, desc, &ret);
-+ if (err)
-+ return err;
-+ } else {
-+ return -ENOTSUPP;
-+ }
-+ break;
-+ case PIN_CONFIG_BIAS_PULL_UP:
-+ if (hw->soc->bias_get) {
-+ err = hw->soc->bias_get(hw, desc, 1, &ret);
-+ if (err)
-+ return err;
-+ } else {
-+ return -ENOTSUPP;
-+ }
-+ break;
-+ case PIN_CONFIG_BIAS_PULL_DOWN:
-+ if (hw->soc->bias_get) {
-+ err = hw->soc->bias_get(hw, desc, 0, &ret);
-+ if (err)
-+ return err;
-+ } else {
-+ return -ENOTSUPP;
-+ }
-+ break;
-+ case PIN_CONFIG_SLEW_RATE:
-+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_SR, &val);
-+ if (err)
-+ return err;
-+
-+ if (!val)
-+ return -EINVAL;
-+
-+ break;
-+ case PIN_CONFIG_INPUT_ENABLE:
-+ case PIN_CONFIG_OUTPUT_ENABLE:
-+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DIR, &val);
-+ if (err)
-+ return err;
-+
-+ /* HW takes input mode as zero; output mode as non-zero */
-+ if ((val && param == PIN_CONFIG_INPUT_ENABLE) ||
-+ (!val && param == PIN_CONFIG_OUTPUT_ENABLE))
-+ return -EINVAL;
-+
-+ break;
-+ case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
-+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DIR, &val);
-+ if (err)
-+ return err;
-+
-+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_SMT, &val2);
-+ if (err)
-+ return err;
-+
-+ if (val || !val2)
-+ return -EINVAL;
-+
-+ break;
-+ case PIN_CONFIG_DRIVE_STRENGTH:
-+ if (hw->soc->drive_get) {
-+ err = hw->soc->drive_get(hw, desc, &ret);
-+ if (err)
-+ return err;
-+ } else {
-+ err = -ENOTSUPP;
-+ }
-+ break;
-+ case MTK_PIN_CONFIG_TDSEL:
-+ case MTK_PIN_CONFIG_RDSEL:
-+ reg = (param == MTK_PIN_CONFIG_TDSEL) ?
-+ PINCTRL_PIN_REG_TDSEL : PINCTRL_PIN_REG_RDSEL;
-+
-+ err = mtk_hw_get_value(hw, desc, reg, &val);
-+ if (err)
-+ return err;
-+
-+ ret = val;
-+
-+ break;
-+ case MTK_PIN_CONFIG_PU_ADV:
-+ case MTK_PIN_CONFIG_PD_ADV:
-+ if (hw->soc->adv_pull_get) {
-+ bool pullup;
-+
-+ pullup = param == MTK_PIN_CONFIG_PU_ADV;
-+ err = hw->soc->adv_pull_get(hw, desc, pullup, &ret);
-+ if (err)
-+ return err;
-+ } else {
-+ return -ENOTSUPP;
-+ }
-+ break;
-+ default:
-+ return -ENOTSUPP;
-+ }
-+
-+ *config = pinconf_to_config_packed(param, ret);
-+
-+ return 0;
-+}
-+
-+static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
-+ unsigned long *configs, unsigned int num_configs)
-+{
-+ struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
-+ const struct mtk_pin_desc *desc;
-+ u32 reg, param, arg;
-+ int cfg, err = 0;
-+
-+ desc = (const struct mtk_pin_desc *)&hw->soc->pins[pin];
-+
-+ for (cfg = 0; cfg < num_configs; cfg++) {
-+ param = pinconf_to_config_param(configs[cfg]);
-+ arg = pinconf_to_config_argument(configs[cfg]);
-+
-+ switch (param) {
-+ case PIN_CONFIG_BIAS_DISABLE:
-+ if (hw->soc->bias_disable_set) {
-+ err = hw->soc->bias_disable_set(hw, desc);
-+ if (err)
-+ return err;
-+ } else {
-+ return -ENOTSUPP;
-+ }
-+ break;
-+ case PIN_CONFIG_BIAS_PULL_UP:
-+ if (hw->soc->bias_set) {
-+ err = hw->soc->bias_set(hw, desc, 1);
-+ if (err)
-+ return err;
-+ } else {
-+ return -ENOTSUPP;
-+ }
-+ break;
-+ case PIN_CONFIG_BIAS_PULL_DOWN:
-+ if (hw->soc->bias_set) {
-+ err = hw->soc->bias_set(hw, desc, 0);
-+ if (err)
-+ return err;
-+ } else {
-+ return -ENOTSUPP;
-+ }
-+ break;
-+ case PIN_CONFIG_OUTPUT_ENABLE:
-+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_SMT,
-+ MTK_DISABLE);
-+ if (err)
-+ goto err;
-+
-+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR,
-+ MTK_OUTPUT);
-+ if (err)
-+ goto err;
-+ break;
-+ case PIN_CONFIG_INPUT_ENABLE:
-+
-+ if (hw->soc->ies_present) {
-+ mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_IES,
-+ MTK_ENABLE);
-+ }
-+
-+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR,
-+ MTK_INPUT);
-+ if (err)
-+ goto err;
-+ break;
-+ case PIN_CONFIG_SLEW_RATE:
-+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_SR,
-+ arg);
-+ if (err)
-+ goto err;
-+
-+ break;
-+ case PIN_CONFIG_OUTPUT:
-+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR,
-+ MTK_OUTPUT);
-+ if (err)
-+ goto err;
-+
-+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DO,
-+ arg);
-+ if (err)
-+ goto err;
-+ break;
-+ case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
-+ /* arg = 1: Input mode & SMT enable ;
-+ * arg = 0: Output mode & SMT disable
-+ */
-+ arg = arg ? 2 : 1;
-+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR,
-+ arg & 1);
-+ if (err)
-+ goto err;
-+
-+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_SMT,
-+ !!(arg & 2));
-+ if (err)
-+ goto err;
-+ break;
-+ case PIN_CONFIG_DRIVE_STRENGTH:
-+ if (hw->soc->drive_set) {
-+ err = hw->soc->drive_set(hw, desc, arg);
-+ if (err)
-+ return err;
-+ } else {
-+ err = -ENOTSUPP;
-+ }
-+ break;
-+ case MTK_PIN_CONFIG_TDSEL:
-+ case MTK_PIN_CONFIG_RDSEL:
-+ reg = (param == MTK_PIN_CONFIG_TDSEL) ?
-+ PINCTRL_PIN_REG_TDSEL : PINCTRL_PIN_REG_RDSEL;
-+
-+ err = mtk_hw_set_value(hw, desc, reg, arg);
-+ if (err)
-+ goto err;
-+ break;
-+ case MTK_PIN_CONFIG_PU_ADV:
-+ case MTK_PIN_CONFIG_PD_ADV:
-+ if (hw->soc->adv_pull_set) {
-+ bool pullup;
-+
-+ pullup = param == MTK_PIN_CONFIG_PU_ADV;
-+ err = hw->soc->adv_pull_set(hw, desc, pullup,
-+ arg);
-+ if (err)
-+ return err;
-+ } else {
-+ return -ENOTSUPP;
-+ }
-+ break;
-+ default:
-+ err = -ENOTSUPP;
-+ }
-+ }
-+err:
-+ return err;
-+}
-+
-+static int mtk_pinconf_group_get(struct pinctrl_dev *pctldev,
-+ unsigned int group, unsigned long *config)
-+{
-+ const unsigned int *pins;
-+ unsigned int i, npins, old = 0;
-+ int ret;
-+
-+ ret = pinctrl_generic_get_group_pins(pctldev, group, &pins, &npins);
-+ if (ret)
-+ return ret;
-+
-+ for (i = 0; i < npins; i++) {
-+ if (mtk_pinconf_get(pctldev, pins[i], config))
-+ return -ENOTSUPP;
-+
-+ /* configs do not match between two pins */
-+ if (i && old != *config)
-+ return -ENOTSUPP;
-+
-+ old = *config;
-+ }
-+
-+ return 0;
-+}
-+
-+static int mtk_pinconf_group_set(struct pinctrl_dev *pctldev,
-+ unsigned int group, unsigned long *configs,
-+ unsigned int num_configs)
-+{
-+ const unsigned int *pins;
-+ unsigned int i, npins;
-+ int ret;
-+
-+ ret = pinctrl_generic_get_group_pins(pctldev, group, &pins, &npins);
-+ if (ret)
-+ return ret;
-+
-+ for (i = 0; i < npins; i++) {
-+ ret = mtk_pinconf_set(pctldev, pins[i], configs, num_configs);
-+ if (ret)
-+ return ret;
-+ }
-+
-+ return 0;
-+}
-+
-+static const struct pinctrl_ops mtk_pctlops = {
-+ .get_groups_count = pinctrl_generic_get_group_count,
-+ .get_group_name = pinctrl_generic_get_group_name,
-+ .get_group_pins = pinctrl_generic_get_group_pins,
-+ .dt_node_to_map = pinconf_generic_dt_node_to_map_all,
-+ .dt_free_map = pinconf_generic_dt_free_map,
-+};
-+
-+static const struct pinmux_ops mtk_pmxops = {
-+ .get_functions_count = pinmux_generic_get_function_count,
-+ .get_function_name = pinmux_generic_get_function_name,
-+ .get_function_groups = pinmux_generic_get_function_groups,
-+ .set_mux = mtk_pinmux_set_mux,
-+ .gpio_request_enable = mtk_pinmux_gpio_request_enable,
-+ .gpio_set_direction = mtk_pinmux_gpio_set_direction,
-+ .strict = true,
-+};
-+
-+static const struct pinconf_ops mtk_confops = {
-+ .is_generic = true,
-+ .pin_config_get = mtk_pinconf_get,
-+ .pin_config_set = mtk_pinconf_set,
-+ .pin_config_group_get = mtk_pinconf_group_get,
-+ .pin_config_group_set = mtk_pinconf_group_set,
-+ .pin_config_config_dbg_show = pinconf_generic_dump_config,
-+};
-+
-+static struct pinctrl_desc mtk_desc = {
-+ .name = PINCTRL_PINCTRL_DEV,
-+ .pctlops = &mtk_pctlops,
-+ .pmxops = &mtk_pmxops,
-+ .confops = &mtk_confops,
-+ .owner = THIS_MODULE,
-+};
-+
-+static int mtk_gpio_get(struct gpio_chip *chip, unsigned int gpio)
-+{
-+ struct mtk_pinctrl *hw = gpiochip_get_data(chip);
-+ const struct mtk_pin_desc *desc;
-+ int value, err;
-+
-+ desc = (const struct mtk_pin_desc *)&hw->soc->pins[gpio];
-+
-+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DI, &value);
-+ if (err)
-+ return err;
-+
-+ return !!value;
-+}
-+
-+static void mtk_gpio_set(struct gpio_chip *chip, unsigned int gpio, int value)
-+{
-+ struct mtk_pinctrl *hw = gpiochip_get_data(chip);
-+ const struct mtk_pin_desc *desc;
-+
-+ desc = (const struct mtk_pin_desc *)&hw->soc->pins[gpio];
-+
-+ mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DO, !!value);
-+}
-+
-+static int mtk_gpio_direction_input(struct gpio_chip *chip, unsigned int gpio)
-+{
-+ return pinctrl_gpio_direction_input(chip->base + gpio);
-+}
-+
-+static int mtk_gpio_direction_output(struct gpio_chip *chip, unsigned int gpio,
-+ int value)
-+{
-+ mtk_gpio_set(chip, gpio, value);
-+
-+ return pinctrl_gpio_direction_output(chip->base + gpio);
-+}
-+
-+static int mtk_gpio_to_irq(struct gpio_chip *chip, unsigned int offset)
-+{
-+ struct mtk_pinctrl *hw = gpiochip_get_data(chip);
-+ const struct mtk_pin_desc *desc;
-+
-+ if (!hw->eint)
-+ return -ENOTSUPP;
-+
-+ desc = (const struct mtk_pin_desc *)&hw->soc->pins[offset];
-+
-+ if (desc->eint.eint_n == (u16)EINT_NA)
-+ return -ENOTSUPP;
-+
-+ return mtk_eint_find_irq(hw->eint, desc->eint.eint_n);
-+}
-+
-+static int mtk_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
-+ unsigned long config)
-+{
-+ struct mtk_pinctrl *hw = gpiochip_get_data(chip);
-+ const struct mtk_pin_desc *desc;
-+ u32 debounce;
-+
-+ desc = (const struct mtk_pin_desc *)&hw->soc->pins[offset];
-+
-+ if (!hw->eint ||
-+ pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE ||
-+ desc->eint.eint_n == (u16)EINT_NA)
-+ return -ENOTSUPP;
-+
-+ debounce = pinconf_to_config_argument(config);
-+
-+ return mtk_eint_set_debounce(hw->eint, desc->eint.eint_n, debounce);
-+}
-+
-+static int mtk_build_gpiochip(struct mtk_pinctrl *hw, struct device_node *np)
-+{
-+ struct gpio_chip *chip = &hw->chip;
-+ int ret;
-+
-+ chip->label = PINCTRL_PINCTRL_DEV;
-+ chip->parent = hw->dev;
-+ chip->request = gpiochip_generic_request;
-+ chip->free = gpiochip_generic_free;
-+ chip->direction_input = mtk_gpio_direction_input;
-+ chip->direction_output = mtk_gpio_direction_output;
-+ chip->get = mtk_gpio_get;
-+ chip->set = mtk_gpio_set;
-+ chip->to_irq = mtk_gpio_to_irq,
-+ chip->set_config = mtk_gpio_set_config,
-+ chip->base = -1;
-+ chip->ngpio = hw->soc->npins;
-+ chip->of_node = np;
-+ chip->of_gpio_n_cells = 2;
-+
-+ ret = gpiochip_add_data(chip, hw);
-+ if (ret < 0)
-+ return ret;
-+
-+ /* Just for backward compatible for these old pinctrl nodes without
-+ * "gpio-ranges" property. Otherwise, called directly from a
-+ * DeviceTree-supported pinctrl driver is DEPRECATED.
-+ * Please see Section 2.1 of
-+ * Documentation/devicetree/bindings/gpio/gpio.txt on how to
-+ * bind pinctrl and gpio drivers via the "gpio-ranges" property.
-+ */
-+ if (!of_find_property(np, "gpio-ranges", NULL)) {
-+ ret = gpiochip_add_pin_range(chip, dev_name(hw->dev), 0, 0,
-+ chip->ngpio);
-+ if (ret < 0) {
-+ gpiochip_remove(chip);
-+ return ret;
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+static int mtk_build_groups(struct mtk_pinctrl *hw)
-+{
-+ int err, i;
-+
-+ for (i = 0; i < hw->soc->ngrps; i++) {
-+ const struct group_desc *group = hw->soc->grps + i;
-+
-+ err = pinctrl_generic_add_group(hw->pctrl, group->name,
-+ group->pins, group->num_pins,
-+ group->data);
-+ if (err < 0) {
-+ dev_err(hw->dev, "Failed to register group %s\n",
-+ group->name);
-+ return err;
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+static int mtk_build_functions(struct mtk_pinctrl *hw)
-+{
-+ int i, err;
-+
-+ for (i = 0; i < hw->soc->nfuncs ; i++) {
-+ const struct function_desc *func = hw->soc->funcs + i;
-+
-+ err = pinmux_generic_add_function(hw->pctrl, func->name,
-+ func->group_names,
-+ func->num_group_names,
-+ func->data);
-+ if (err < 0) {
-+ dev_err(hw->dev, "Failed to register function %s\n",
-+ func->name);
-+ return err;
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+int mtk_moore_pinctrl_probe(struct platform_device *pdev,
-+ const struct mtk_pin_soc *soc)
-+{
-+ struct pinctrl_pin_desc *pins;
-+ struct resource *res;
-+ struct mtk_pinctrl *hw;
-+ int err, i;
-+
-+ hw = devm_kzalloc(&pdev->dev, sizeof(*hw), GFP_KERNEL);
-+ if (!hw)
-+ return -ENOMEM;
-+
-+ hw->soc = soc;
-+ hw->dev = &pdev->dev;
-+
-+ if (!hw->soc->nbase_names) {
-+ dev_err(&pdev->dev,
-+ "SoC should be assigned at least one register base\n");
-+ return -EINVAL;
-+ }
-+
-+ hw->base = devm_kmalloc_array(&pdev->dev, hw->soc->nbase_names,
-+ sizeof(*hw->base), GFP_KERNEL);
-+ if (!hw->base)
-+ return -ENOMEM;
-+
-+ for (i = 0; i < hw->soc->nbase_names; i++) {
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-+ hw->soc->base_names[i]);
-+ if (!res) {
-+ dev_err(&pdev->dev, "missing IO resource\n");
-+ return -ENXIO;
-+ }
-+
-+ hw->base[i] = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(hw->base[i]))
-+ return PTR_ERR(hw->base[i]);
-+ }
-+
-+ hw->nbase = hw->soc->nbase_names;
-+
-+ /* Copy from internal struct mtk_pin_desc to register to the core */
-+ pins = devm_kmalloc_array(&pdev->dev, hw->soc->npins, sizeof(*pins),
-+ GFP_KERNEL);
-+ if (!pins)
-+ return -ENOMEM;
-+
-+ for (i = 0; i < hw->soc->npins; i++) {
-+ pins[i].number = hw->soc->pins[i].number;
-+ pins[i].name = hw->soc->pins[i].name;
-+ }
-+
-+ /* Setup pins descriptions per SoC types */
-+ mtk_desc.pins = (const struct pinctrl_pin_desc *)pins;
-+ mtk_desc.npins = hw->soc->npins;
-+ mtk_desc.num_custom_params = ARRAY_SIZE(mtk_custom_bindings);
-+ mtk_desc.custom_params = mtk_custom_bindings;
-+#ifdef CONFIG_DEBUG_FS
-+ mtk_desc.custom_conf_items = mtk_conf_items;
-+#endif
-+
-+ err = devm_pinctrl_register_and_init(&pdev->dev, &mtk_desc, hw,
-+ &hw->pctrl);
-+ if (err)
-+ return err;
-+
-+ /* Setup groups descriptions per SoC types */
-+ err = mtk_build_groups(hw);
-+ if (err) {
-+ dev_err(&pdev->dev, "Failed to build groups\n");
-+ return err;
-+ }
-+
-+ /* Setup functions descriptions per SoC types */
-+ err = mtk_build_functions(hw);
-+ if (err) {
-+ dev_err(&pdev->dev, "Failed to build functions\n");
-+ return err;
-+ }
-+
-+ /* For able to make pinctrl_claim_hogs, we must not enable pinctrl
-+ * until all groups and functions are being added one.
-+ */
-+ err = pinctrl_enable(hw->pctrl);
-+ if (err)
-+ return err;
-+
-+ err = mtk_build_eint(hw, pdev);
-+ if (err)
-+ dev_warn(&pdev->dev,
-+ "Failed to add EINT, but pinctrl still can work\n");
-+
-+ /* Build gpiochip should be after pinctrl_enable is done */
-+ err = mtk_build_gpiochip(hw, pdev->dev.of_node);
-+ if (err) {
-+ dev_err(&pdev->dev, "Failed to add gpio_chip\n");
-+ return err;
-+ }
-+
-+ platform_set_drvdata(pdev, hw);
-+
-+ return 0;
-+}
---- /dev/null
-+++ b/drivers/pinctrl/mediatek/pinctrl-moore.h
-@@ -0,0 +1,51 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+/*
-+ * Copyright (C) 2017-2018 MediaTek Inc.
-+ *
-+ * Author: Sean Wang <sean.wang@mediatek.com>
-+ *
-+ */
-+#ifndef __PINCTRL_MOORE_H
-+#define __PINCTRL_MOORE_H
-+
-+#include <linux/io.h>
-+#include <linux/init.h>
-+#include <linux/of.h>
-+#include <linux/of_platform.h>
-+#include <linux/platform_device.h>
-+#include <linux/pinctrl/pinctrl.h>
-+#include <linux/pinctrl/pinmux.h>
-+#include <linux/pinctrl/pinconf.h>
-+#include <linux/pinctrl/pinconf-generic.h>
-+
-+#include "../core.h"
-+#include "../pinconf.h"
-+#include "../pinmux.h"
-+#include "mtk-eint.h"
-+#include "pinctrl-mtk-common-v2.h"
-+
-+#define MTK_RANGE(_a) { .range = (_a), .nranges = ARRAY_SIZE(_a), }
-+
-+#define MTK_PIN(_number, _name, _eint_m, _eint_n, _drv_n) { \
-+ .number = _number, \
-+ .name = _name, \
-+ .eint = { \
-+ .eint_m = _eint_m, \
-+ .eint_n = _eint_n, \
-+ }, \
-+ .drv_n = _drv_n, \
-+ .funcs = NULL, \
-+ }
-+
-+#define PINCTRL_PIN_GROUP(name, id) \
-+ { \
-+ name, \
-+ id##_pins, \
-+ ARRAY_SIZE(id##_pins), \
-+ id##_funcs, \
-+ }
-+
-+int mtk_moore_pinctrl_probe(struct platform_device *pdev,
-+ const struct mtk_pin_soc *soc);
-+
-+#endif /* __PINCTRL_MOORE_H */
---- /dev/null
-+++ b/drivers/pinctrl/mediatek/pinctrl-mt6765.c
-@@ -0,0 +1,1108 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (C) 2018 MediaTek Inc.
-+ *
-+ * Author: ZH Chen <zh.chen@mediatek.com>
-+ *
-+ */
-+
-+#include "pinctrl-mtk-mt6765.h"
-+#include "pinctrl-paris.h"
-+
-+/* MT6765 have multiple bases to program pin configuration listed as the below:
-+ * iocfg[0]:0x10005000, iocfg[1]:0x10002C00, iocfg[2]:0x10002800,
-+ * iocfg[3]:0x10002A00, iocfg[4]:0x10002000, iocfg[5]:0x10002200,
-+ * iocfg[6]:0x10002500, iocfg[7]:0x10002600.
-+ * _i_base could be used to indicate what base the pin should be mapped into.
-+ */
-+
-+#define PIN_FIELD_BASE(_s_pin, _e_pin, _i_base, _s_addr, _x_addrs, _s_bit, _x_bits) \
-+ PIN_FIELD_CALC(_s_pin, _e_pin, _i_base, _s_addr, _x_addrs, _s_bit, \
-+ _x_bits, 32, 0)
-+
-+#define PINS_FIELD_BASE(_s_pin, _e_pin, _i_base, _s_addr, _x_addrs, _s_bit, _x_bits) \
-+ PIN_FIELD_CALC(_s_pin, _e_pin, _i_base, _s_addr, _x_addrs, _s_bit, \
-+ _x_bits, 32, 1)
-+
-+static const struct mtk_pin_field_calc mt6765_pin_mode_range[] = {
-+ PIN_FIELD(0, 202, 0x300, 0x10, 0, 4),
-+};
-+
-+static const struct mtk_pin_field_calc mt6765_pin_dir_range[] = {
-+ PIN_FIELD(0, 202, 0x0, 0x10, 0, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt6765_pin_di_range[] = {
-+ PIN_FIELD(0, 202, 0x200, 0x10, 0, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt6765_pin_do_range[] = {
-+ PIN_FIELD(0, 202, 0x100, 0x10, 0, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt6765_pin_smt_range[] = {
-+ PINS_FIELD_BASE(0, 3, 2, 0x00b0, 0x10, 4, 1),
-+ PINS_FIELD_BASE(4, 7, 2, 0x00b0, 0x10, 5, 1),
-+ PIN_FIELD_BASE(8, 8, 3, 0x0080, 0x10, 3, 1),
-+ PINS_FIELD_BASE(9, 11, 2, 0x00b0, 0x10, 6, 1),
-+ PIN_FIELD_BASE(12, 12, 5, 0x0060, 0x10, 9, 1),
-+ PINS_FIELD_BASE(13, 16, 6, 0x00b0, 0x10, 10, 1),
-+ PINS_FIELD_BASE(17, 20, 6, 0x00b0, 0x10, 8, 1),
-+ PINS_FIELD_BASE(21, 24, 6, 0x00b0, 0x10, 9, 1),
-+ PINS_FIELD_BASE(25, 28, 6, 0x00b0, 0x10, 7, 1),
-+ PIN_FIELD_BASE(29, 29, 6, 0x00b0, 0x10, 0, 1),
-+ PIN_FIELD_BASE(30, 30, 6, 0x00b0, 0x10, 1, 1),
-+ PINS_FIELD_BASE(31, 34, 6, 0x00b0, 0x10, 2, 1),
-+ PINS_FIELD_BASE(35, 36, 6, 0x00b0, 0x10, 5, 1),
-+ PIN_FIELD_BASE(37, 37, 6, 0x00b0, 0x10, 6, 1),
-+ PIN_FIELD_BASE(38, 38, 6, 0x00b0, 0x10, 4, 1),
-+ PINS_FIELD_BASE(39, 40, 6, 0x00b0, 0x10, 3, 1),
-+ PINS_FIELD_BASE(41, 42, 7, 0x00c0, 0x10, 6, 1),
-+ PIN_FIELD_BASE(43, 43, 7, 0x00c0, 0x10, 3, 1),
-+ PIN_FIELD_BASE(44, 44, 7, 0x00c0, 0x10, 4, 1),
-+ PIN_FIELD_BASE(45, 45, 7, 0x00c0, 0x10, 8, 1),
-+ PINS_FIELD_BASE(46, 47, 7, 0x00c0, 0x10, 7, 1),
-+ PIN_FIELD_BASE(48, 48, 7, 0x00c0, 0x10, 15, 1),
-+ PIN_FIELD_BASE(49, 49, 7, 0x00c0, 0x10, 17, 1),
-+ PIN_FIELD_BASE(50, 50, 7, 0x00c0, 0x10, 14, 1),
-+ PIN_FIELD_BASE(51, 51, 7, 0x00c0, 0x10, 16, 1),
-+ PINS_FIELD_BASE(52, 57, 7, 0x00c0, 0x10, 0, 1),
-+ PINS_FIELD_BASE(58, 60, 7, 0x00c0, 0x10, 12, 1),
-+ PINS_FIELD_BASE(61, 62, 3, 0x0080, 0x10, 5, 1),
-+ PINS_FIELD_BASE(63, 64, 3, 0x0080, 0x10, 4, 1),
-+ PINS_FIELD_BASE(65, 66, 3, 0x0080, 0x10, 7, 1),
-+ PINS_FIELD_BASE(67, 68, 3, 0x0080, 0x10, 6, 1),
-+ PINS_FIELD_BASE(69, 73, 3, 0x0080, 0x10, 1, 1),
-+ PINS_FIELD_BASE(74, 78, 3, 0x0080, 0x10, 2, 1),
-+ PINS_FIELD_BASE(79, 80, 3, 0x0080, 0x10, 0, 1),
-+ PIN_FIELD_BASE(81, 81, 3, 0x0080, 0x10, 12, 1),
-+ PIN_FIELD_BASE(82, 82, 3, 0x0080, 0x10, 11, 1),
-+ PIN_FIELD_BASE(83, 83, 3, 0x0080, 0x10, 9, 1),
-+ PIN_FIELD_BASE(84, 84, 3, 0x0080, 0x10, 10, 1),
-+ PIN_FIELD_BASE(85, 85, 7, 0x00c0, 0x10, 12, 1),
-+ PIN_FIELD_BASE(86, 86, 7, 0x00c0, 0x10, 13, 1),
-+ PIN_FIELD_BASE(87, 87, 7, 0x00c0, 0x10, 2, 1),
-+ PIN_FIELD_BASE(88, 88, 7, 0x00c0, 0x10, 1, 1),
-+ PIN_FIELD_BASE(89, 89, 2, 0x00b0, 0x10, 13, 1),
-+ PIN_FIELD_BASE(90, 90, 3, 0x0080, 0x10, 8, 1),
-+ PINS_FIELD_BASE(91, 92, 2, 0x00b0, 0x10, 8, 1),
-+ PINS_FIELD_BASE(93, 94, 2, 0x00b0, 0x10, 7, 1),
-+ PINS_FIELD_BASE(95, 96, 2, 0x00b0, 0x10, 14, 1),
-+ PINS_FIELD_BASE(97, 98, 2, 0x00b0, 0x10, 2, 1),
-+ PIN_FIELD_BASE(99, 99, 2, 0x00b0, 0x10, 0, 1),
-+ PIN_FIELD_BASE(100, 100, 2, 0x00b0, 0x10, 1, 1),
-+ PINS_FIELD_BASE(101, 102, 2, 0x00b0, 0x10, 3, 1),
-+ PIN_FIELD_BASE(103, 103, 2, 0x00b0, 0x10, 9, 1),
-+ PIN_FIELD_BASE(104, 104, 2, 0x00b0, 0x10, 11, 1),
-+ PIN_FIELD_BASE(105, 105, 2, 0x00b0, 0x10, 10, 1),
-+ PIN_FIELD_BASE(106, 106, 2, 0x00b0, 0x10, 12, 1),
-+ PIN_FIELD_BASE(107, 107, 1, 0x0080, 0x10, 4, 1),
-+ PIN_FIELD_BASE(108, 108, 1, 0x0080, 0x10, 3, 1),
-+ PIN_FIELD_BASE(109, 109, 1, 0x0080, 0x10, 5, 1),
-+ PIN_FIELD_BASE(110, 110, 1, 0x0080, 0x10, 0, 1),
-+ PIN_FIELD_BASE(111, 111, 1, 0x0080, 0x10, 1, 1),
-+ PIN_FIELD_BASE(112, 112, 1, 0x0080, 0x10, 2, 1),
-+ PIN_FIELD_BASE(113, 113, 1, 0x0080, 0x10, 9, 1),
-+ PIN_FIELD_BASE(114, 114, 1, 0x0080, 0x10, 10, 1),
-+ PIN_FIELD_BASE(115, 115, 1, 0x0080, 0x10, 6, 1),
-+ PIN_FIELD_BASE(116, 116, 1, 0x0080, 0x10, 7, 1),
-+ PIN_FIELD_BASE(117, 117, 1, 0x0080, 0x10, 12, 1),
-+ PIN_FIELD_BASE(118, 118, 1, 0x0080, 0x10, 13, 1),
-+ PIN_FIELD_BASE(119, 119, 1, 0x0080, 0x10, 14, 1),
-+ PIN_FIELD_BASE(120, 120, 1, 0x0080, 0x10, 11, 1),
-+ PIN_FIELD_BASE(121, 121, 1, 0x0080, 0x10, 8, 1),
-+ PIN_FIELD_BASE(122, 122, 4, 0x0080, 0x10, 2, 1),
-+ PIN_FIELD_BASE(123, 123, 4, 0x0080, 0x10, 3, 1),
-+ PIN_FIELD_BASE(124, 124, 4, 0x0080, 0x10, 1, 1),
-+ PIN_FIELD_BASE(125, 125, 4, 0x0080, 0x10, 5, 1),
-+ PIN_FIELD_BASE(126, 126, 4, 0x0080, 0x10, 7, 1),
-+ PIN_FIELD_BASE(127, 127, 4, 0x0080, 0x10, 9, 1),
-+ PIN_FIELD_BASE(128, 128, 4, 0x0080, 0x10, 4, 1),
-+ PIN_FIELD_BASE(129, 129, 4, 0x0080, 0x10, 8, 1),
-+ PIN_FIELD_BASE(130, 130, 4, 0x0080, 0x10, 10, 1),
-+ PIN_FIELD_BASE(131, 131, 4, 0x0080, 0x10, 11, 1),
-+ PIN_FIELD_BASE(132, 132, 4, 0x0080, 0x10, 6, 1),
-+ PIN_FIELD_BASE(133, 133, 4, 0x0080, 0x10, 12, 1),
-+ PIN_FIELD_BASE(134, 134, 5, 0x0060, 0x10, 11, 1),
-+ PIN_FIELD_BASE(135, 135, 5, 0x0060, 0x10, 13, 1),
-+ PIN_FIELD_BASE(136, 136, 5, 0x0060, 0x10, 1, 1),
-+ PIN_FIELD_BASE(137, 137, 5, 0x0060, 0x10, 7, 1),
-+ PIN_FIELD_BASE(138, 138, 5, 0x0060, 0x10, 4, 1),
-+ PIN_FIELD_BASE(139, 139, 5, 0x0060, 0x10, 5, 1),
-+ PIN_FIELD_BASE(140, 140, 5, 0x0060, 0x10, 0, 1),
-+ PIN_FIELD_BASE(141, 141, 5, 0x0060, 0x10, 6, 1),
-+ PIN_FIELD_BASE(142, 142, 5, 0x0060, 0x10, 2, 1),
-+ PIN_FIELD_BASE(143, 143, 5, 0x0060, 0x10, 3, 1),
-+ PINS_FIELD_BASE(144, 147, 5, 0x0060, 0x10, 10, 1),
-+ PINS_FIELD_BASE(148, 149, 5, 0x0060, 0x10, 12, 1),
-+ PINS_FIELD_BASE(150, 151, 7, 0x00c0, 0x10, 9, 1),
-+ PINS_FIELD_BASE(152, 153, 7, 0x00c0, 0x10, 10, 1),
-+ PIN_FIELD_BASE(154, 154, 7, 0x00c0, 0x10, 11, 1),
-+ PINS_FIELD_BASE(155, 158, 3, 0x0080, 0x10, 13, 1),
-+ PIN_FIELD_BASE(159, 159, 7, 0x00c0, 0x10, 11, 1),
-+ PIN_FIELD_BASE(160, 160, 5, 0x0060, 0x10, 8, 1),
-+ PIN_FIELD_BASE(161, 161, 1, 0x0080, 0x10, 15, 1),
-+ PIN_FIELD_BASE(162, 162, 1, 0x0080, 0x10, 16, 1),
-+ PINS_FIELD_BASE(163, 170, 4, 0x0080, 0x10, 0, 1),
-+ PINS_FIELD_BASE(171, 179, 7, 0x00c0, 0x10, 5, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt6765_pin_pd_range[] = {
-+ PIN_FIELD_BASE(0, 0, 2, 0x0040, 0x10, 6, 1),
-+ PIN_FIELD_BASE(1, 1, 2, 0x0040, 0x10, 7, 1),
-+ PIN_FIELD_BASE(2, 2, 2, 0x0040, 0x10, 10, 1),
-+ PIN_FIELD_BASE(3, 3, 2, 0x0040, 0x10, 11, 1),
-+ PIN_FIELD_BASE(4, 4, 2, 0x0040, 0x10, 12, 1),
-+ PIN_FIELD_BASE(5, 5, 2, 0x0040, 0x10, 13, 1),
-+ PIN_FIELD_BASE(6, 6, 2, 0x0040, 0x10, 14, 1),
-+ PIN_FIELD_BASE(7, 7, 2, 0x0040, 0x10, 15, 1),
-+ PIN_FIELD_BASE(8, 8, 3, 0x0040, 0x10, 12, 1),
-+ PIN_FIELD_BASE(9, 9, 2, 0x0040, 0x10, 16, 1),
-+ PIN_FIELD_BASE(10, 10, 2, 0x0040, 0x10, 8, 1),
-+ PIN_FIELD_BASE(11, 11, 2, 0x0040, 0x10, 9, 1),
-+ PIN_FIELD_BASE(12, 12, 5, 0x0030, 0x10, 9, 1),
-+ PIN_FIELD_BASE(13, 13, 6, 0x0040, 0x10, 14, 1),
-+ PIN_FIELD_BASE(14, 14, 6, 0x0040, 0x10, 13, 1),
-+ PIN_FIELD_BASE(15, 15, 6, 0x0040, 0x10, 15, 1),
-+ PIN_FIELD_BASE(16, 16, 6, 0x0040, 0x10, 12, 1),
-+ PIN_FIELD_BASE(17, 17, 6, 0x0040, 0x10, 7, 1),
-+ PIN_FIELD_BASE(18, 18, 6, 0x0040, 0x10, 4, 1),
-+ PIN_FIELD_BASE(19, 19, 6, 0x0040, 0x10, 6, 1),
-+ PIN_FIELD_BASE(20, 20, 6, 0x0040, 0x10, 5, 1),
-+ PIN_FIELD_BASE(21, 21, 6, 0x0040, 0x10, 10, 1),
-+ PIN_FIELD_BASE(22, 22, 6, 0x0040, 0x10, 9, 1),
-+ PIN_FIELD_BASE(23, 23, 6, 0x0040, 0x10, 11, 1),
-+ PIN_FIELD_BASE(24, 24, 6, 0x0040, 0x10, 8, 1),
-+ PIN_FIELD_BASE(25, 25, 6, 0x0040, 0x10, 2, 1),
-+ PIN_FIELD_BASE(26, 26, 6, 0x0040, 0x10, 1, 1),
-+ PIN_FIELD_BASE(27, 27, 6, 0x0040, 0x10, 3, 1),
-+ PINS_FIELD_BASE(28, 40, 6, 0x0040, 0x10, 0, 1),
-+ PIN_FIELD_BASE(41, 41, 7, 0x0060, 0x10, 19, 1),
-+ PIN_FIELD_BASE(42, 42, 7, 0x0060, 0x10, 9, 1),
-+ PIN_FIELD_BASE(43, 43, 7, 0x0060, 0x10, 8, 1),
-+ PIN_FIELD_BASE(44, 44, 7, 0x0060, 0x10, 10, 1),
-+ PIN_FIELD_BASE(45, 45, 7, 0x0060, 0x10, 22, 1),
-+ PIN_FIELD_BASE(46, 46, 7, 0x0060, 0x10, 21, 1),
-+ PIN_FIELD_BASE(47, 47, 7, 0x0060, 0x10, 20, 1),
-+ PIN_FIELD_BASE(48, 48, 7, 0x0070, 0x10, 3, 1),
-+ PIN_FIELD_BASE(49, 49, 7, 0x0070, 0x10, 5, 1),
-+ PIN_FIELD_BASE(50, 50, 7, 0x0070, 0x10, 2, 1),
-+ PIN_FIELD_BASE(51, 51, 7, 0x0070, 0x10, 4, 1),
-+ PIN_FIELD_BASE(52, 52, 7, 0x0060, 0x10, 1, 1),
-+ PIN_FIELD_BASE(53, 53, 7, 0x0060, 0x10, 0, 1),
-+ PIN_FIELD_BASE(54, 54, 7, 0x0060, 0x10, 5, 1),
-+ PIN_FIELD_BASE(55, 55, 7, 0x0060, 0x10, 3, 1),
-+ PIN_FIELD_BASE(56, 56, 7, 0x0060, 0x10, 4, 1),
-+ PIN_FIELD_BASE(57, 57, 7, 0x0060, 0x10, 2, 1),
-+ PIN_FIELD_BASE(58, 58, 7, 0x0070, 0x10, 0, 1),
-+ PIN_FIELD_BASE(59, 59, 7, 0x0060, 0x10, 31, 1),
-+ PIN_FIELD_BASE(60, 60, 7, 0x0060, 0x10, 30, 1),
-+ PIN_FIELD_BASE(61, 61, 3, 0x0040, 0x10, 18, 1),
-+ PIN_FIELD_BASE(62, 62, 3, 0x0040, 0x10, 14, 1),
-+ PIN_FIELD_BASE(63, 63, 3, 0x0040, 0x10, 17, 1),
-+ PIN_FIELD_BASE(64, 64, 3, 0x0040, 0x10, 13, 1),
-+ PIN_FIELD_BASE(65, 65, 3, 0x0040, 0x10, 20, 1),
-+ PIN_FIELD_BASE(66, 66, 3, 0x0040, 0x10, 16, 1),
-+ PIN_FIELD_BASE(67, 67, 3, 0x0040, 0x10, 19, 1),
-+ PIN_FIELD_BASE(68, 68, 3, 0x0040, 0x10, 15, 1),
-+ PIN_FIELD_BASE(69, 69, 3, 0x0040, 0x10, 8, 1),
-+ PIN_FIELD_BASE(70, 70, 3, 0x0040, 0x10, 7, 1),
-+ PIN_FIELD_BASE(71, 71, 3, 0x0040, 0x10, 6, 1),
-+ PIN_FIELD_BASE(72, 72, 3, 0x0040, 0x10, 5, 1),
-+ PIN_FIELD_BASE(73, 73, 3, 0x0040, 0x10, 4, 1),
-+ PIN_FIELD_BASE(74, 74, 3, 0x0040, 0x10, 3, 1),
-+ PIN_FIELD_BASE(75, 75, 3, 0x0040, 0x10, 2, 1),
-+ PIN_FIELD_BASE(76, 76, 3, 0x0040, 0x10, 1, 1),
-+ PIN_FIELD_BASE(77, 77, 3, 0x0040, 0x10, 0, 1),
-+ PIN_FIELD_BASE(78, 78, 3, 0x0040, 0x10, 9, 1),
-+ PIN_FIELD_BASE(79, 79, 3, 0x0040, 0x10, 11, 1),
-+ PIN_FIELD_BASE(80, 80, 3, 0x0040, 0x10, 10, 1),
-+ PIN_FIELD_BASE(81, 81, 3, 0x0040, 0x10, 25, 1),
-+ PIN_FIELD_BASE(82, 82, 3, 0x0040, 0x10, 24, 1),
-+ PIN_FIELD_BASE(83, 83, 3, 0x0040, 0x10, 22, 1),
-+ PIN_FIELD_BASE(84, 84, 3, 0x0040, 0x10, 23, 1),
-+ PIN_FIELD_BASE(85, 85, 7, 0x0070, 0x10, 1, 1),
-+ PIN_FIELD_BASE(86, 86, 7, 0x0060, 0x10, 29, 1),
-+ PIN_FIELD_BASE(87, 87, 7, 0x0060, 0x10, 7, 1),
-+ PIN_FIELD_BASE(88, 88, 7, 0x0060, 0x10, 6, 1),
-+ PIN_FIELD_BASE(89, 89, 2, 0x0040, 0x10, 21, 1),
-+ PINS_FIELD_BASE(90, 94, 3, 0x0040, 0x10, 21, 1),
-+ PIN_FIELD_BASE(95, 95, 2, 0x0040, 0x10, 22, 1),
-+ PIN_FIELD_BASE(96, 96, 2, 0x0040, 0x10, 23, 1),
-+ PIN_FIELD_BASE(97, 97, 2, 0x0040, 0x10, 2, 1),
-+ PIN_FIELD_BASE(98, 98, 2, 0x0040, 0x10, 3, 1),
-+ PIN_FIELD_BASE(99, 99, 2, 0x0040, 0x10, 0, 1),
-+ PIN_FIELD_BASE(100, 100, 2, 0x0040, 0x10, 1, 1),
-+ PIN_FIELD_BASE(101, 101, 2, 0x0040, 0x10, 4, 1),
-+ PIN_FIELD_BASE(102, 102, 2, 0x0040, 0x10, 5, 1),
-+ PIN_FIELD_BASE(103, 103, 2, 0x0040, 0x10, 17, 1),
-+ PIN_FIELD_BASE(104, 104, 2, 0x0040, 0x10, 19, 1),
-+ PIN_FIELD_BASE(105, 105, 2, 0x0040, 0x10, 18, 1),
-+ PIN_FIELD_BASE(106, 106, 2, 0x0040, 0x10, 20, 1),
-+ PIN_FIELD_BASE(107, 107, 1, 0x0040, 0x10, 4, 1),
-+ PIN_FIELD_BASE(108, 108, 1, 0x0040, 0x10, 3, 1),
-+ PIN_FIELD_BASE(109, 109, 1, 0x0040, 0x10, 5, 1),
-+ PIN_FIELD_BASE(110, 110, 1, 0x0040, 0x10, 0, 1),
-+ PIN_FIELD_BASE(111, 111, 1, 0x0040, 0x10, 1, 1),
-+ PIN_FIELD_BASE(112, 112, 1, 0x0040, 0x10, 2, 1),
-+ PIN_FIELD_BASE(113, 113, 1, 0x0040, 0x10, 9, 1),
-+ PIN_FIELD_BASE(114, 114, 1, 0x0040, 0x10, 10, 1),
-+ PIN_FIELD_BASE(115, 115, 1, 0x0040, 0x10, 6, 1),
-+ PIN_FIELD_BASE(116, 116, 1, 0x0040, 0x10, 7, 1),
-+ PIN_FIELD_BASE(117, 117, 1, 0x0040, 0x10, 12, 1),
-+ PIN_FIELD_BASE(118, 118, 1, 0x0040, 0x10, 13, 1),
-+ PIN_FIELD_BASE(119, 119, 1, 0x0040, 0x10, 14, 1),
-+ PIN_FIELD_BASE(120, 120, 1, 0x0040, 0x10, 11, 1),
-+ PINS_FIELD_BASE(121, 133, 1, 0x0040, 0x10, 8, 1),
-+ PIN_FIELD_BASE(134, 134, 5, 0x0030, 0x10, 14, 1),
-+ PIN_FIELD_BASE(135, 135, 5, 0x0030, 0x10, 19, 1),
-+ PIN_FIELD_BASE(136, 136, 5, 0x0030, 0x10, 1, 1),
-+ PIN_FIELD_BASE(137, 137, 5, 0x0030, 0x10, 7, 1),
-+ PIN_FIELD_BASE(138, 138, 5, 0x0030, 0x10, 4, 1),
-+ PIN_FIELD_BASE(139, 139, 5, 0x0030, 0x10, 5, 1),
-+ PIN_FIELD_BASE(140, 140, 5, 0x0030, 0x10, 0, 1),
-+ PIN_FIELD_BASE(141, 141, 5, 0x0030, 0x10, 6, 1),
-+ PIN_FIELD_BASE(142, 142, 5, 0x0030, 0x10, 2, 1),
-+ PIN_FIELD_BASE(143, 143, 5, 0x0030, 0x10, 3, 1),
-+ PIN_FIELD_BASE(144, 144, 5, 0x0030, 0x10, 12, 1),
-+ PIN_FIELD_BASE(145, 145, 5, 0x0030, 0x10, 11, 1),
-+ PIN_FIELD_BASE(146, 146, 5, 0x0030, 0x10, 13, 1),
-+ PIN_FIELD_BASE(147, 147, 5, 0x0030, 0x10, 10, 1),
-+ PIN_FIELD_BASE(148, 148, 5, 0x0030, 0x10, 15, 1),
-+ PIN_FIELD_BASE(149, 149, 5, 0x0030, 0x10, 16, 1),
-+ PIN_FIELD_BASE(150, 150, 7, 0x0060, 0x10, 23, 1),
-+ PIN_FIELD_BASE(151, 151, 7, 0x0060, 0x10, 24, 1),
-+ PIN_FIELD_BASE(152, 152, 7, 0x0060, 0x10, 25, 1),
-+ PIN_FIELD_BASE(153, 153, 7, 0x0060, 0x10, 26, 1),
-+ PIN_FIELD_BASE(154, 154, 7, 0x0060, 0x10, 28, 1),
-+ PIN_FIELD_BASE(155, 155, 3, 0x0040, 0x10, 28, 1),
-+ PIN_FIELD_BASE(156, 156, 3, 0x0040, 0x10, 27, 1),
-+ PIN_FIELD_BASE(157, 157, 3, 0x0040, 0x10, 29, 1),
-+ PIN_FIELD_BASE(158, 158, 3, 0x0040, 0x10, 26, 1),
-+ PIN_FIELD_BASE(159, 159, 7, 0x0060, 0x10, 27, 1),
-+ PIN_FIELD_BASE(160, 160, 5, 0x0030, 0x10, 8, 1),
-+ PIN_FIELD_BASE(161, 161, 1, 0x0040, 0x10, 15, 1),
-+ PIN_FIELD_BASE(162, 162, 1, 0x0040, 0x10, 16, 1),
-+ PIN_FIELD_BASE(163, 163, 4, 0x0020, 0x10, 0, 1),
-+ PIN_FIELD_BASE(164, 164, 4, 0x0020, 0x10, 1, 1),
-+ PIN_FIELD_BASE(165, 165, 4, 0x0020, 0x10, 2, 1),
-+ PIN_FIELD_BASE(166, 166, 4, 0x0020, 0x10, 3, 1),
-+ PIN_FIELD_BASE(167, 167, 4, 0x0020, 0x10, 4, 1),
-+ PIN_FIELD_BASE(168, 168, 4, 0x0020, 0x10, 5, 1),
-+ PIN_FIELD_BASE(169, 169, 4, 0x0020, 0x10, 6, 1),
-+ PIN_FIELD_BASE(170, 170, 4, 0x0020, 0x10, 7, 1),
-+ PIN_FIELD_BASE(171, 171, 7, 0x0060, 0x10, 17, 1),
-+ PIN_FIELD_BASE(172, 172, 7, 0x0060, 0x10, 18, 1),
-+ PIN_FIELD_BASE(173, 173, 7, 0x0060, 0x10, 11, 1),
-+ PIN_FIELD_BASE(174, 174, 7, 0x0060, 0x10, 12, 1),
-+ PIN_FIELD_BASE(175, 175, 7, 0x0060, 0x10, 13, 1),
-+ PIN_FIELD_BASE(176, 176, 7, 0x0060, 0x10, 14, 1),
-+ PIN_FIELD_BASE(177, 177, 7, 0x0060, 0x10, 15, 1),
-+ PINS_FIELD_BASE(178, 179, 7, 0x0060, 0x10, 16, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt6765_pin_pu_range[] = {
-+ PIN_FIELD_BASE(0, 0, 2, 0x0060, 0x10, 6, 1),
-+ PIN_FIELD_BASE(1, 1, 2, 0x0060, 0x10, 7, 1),
-+ PIN_FIELD_BASE(2, 2, 2, 0x0060, 0x10, 10, 1),
-+ PIN_FIELD_BASE(3, 3, 2, 0x0060, 0x10, 11, 1),
-+ PIN_FIELD_BASE(4, 4, 2, 0x0060, 0x10, 12, 1),
-+ PIN_FIELD_BASE(5, 5, 2, 0x0060, 0x10, 13, 1),
-+ PIN_FIELD_BASE(6, 6, 2, 0x0060, 0x10, 14, 1),
-+ PIN_FIELD_BASE(7, 7, 2, 0x0060, 0x10, 15, 1),
-+ PIN_FIELD_BASE(8, 8, 3, 0x0050, 0x10, 12, 1),
-+ PIN_FIELD_BASE(9, 9, 2, 0x0060, 0x10, 16, 1),
-+ PIN_FIELD_BASE(10, 10, 2, 0x0060, 0x10, 8, 1),
-+ PIN_FIELD_BASE(11, 11, 2, 0x0060, 0x10, 9, 1),
-+ PIN_FIELD_BASE(12, 12, 5, 0x0040, 0x10, 9, 1),
-+ PIN_FIELD_BASE(13, 13, 6, 0x0060, 0x10, 14, 1),
-+ PIN_FIELD_BASE(14, 14, 6, 0x0060, 0x10, 13, 1),
-+ PIN_FIELD_BASE(15, 15, 6, 0x0060, 0x10, 15, 1),
-+ PIN_FIELD_BASE(16, 16, 6, 0x0060, 0x10, 12, 1),
-+ PIN_FIELD_BASE(17, 17, 6, 0x0060, 0x10, 7, 1),
-+ PIN_FIELD_BASE(18, 18, 6, 0x0060, 0x10, 4, 1),
-+ PIN_FIELD_BASE(19, 19, 6, 0x0060, 0x10, 6, 1),
-+ PIN_FIELD_BASE(20, 20, 6, 0x0060, 0x10, 5, 1),
-+ PIN_FIELD_BASE(21, 21, 6, 0x0060, 0x10, 10, 1),
-+ PIN_FIELD_BASE(22, 22, 6, 0x0060, 0x10, 9, 1),
-+ PIN_FIELD_BASE(23, 23, 6, 0x0060, 0x10, 11, 1),
-+ PIN_FIELD_BASE(24, 24, 6, 0x0060, 0x10, 8, 1),
-+ PIN_FIELD_BASE(25, 25, 6, 0x0060, 0x10, 2, 1),
-+ PIN_FIELD_BASE(26, 26, 6, 0x0060, 0x10, 1, 1),
-+ PIN_FIELD_BASE(27, 27, 6, 0x0060, 0x10, 3, 1),
-+ PINS_FIELD_BASE(28, 40, 6, 0x0060, 0x10, 0, 1),
-+ PIN_FIELD_BASE(41, 41, 7, 0x0080, 0x10, 19, 1),
-+ PIN_FIELD_BASE(42, 42, 7, 0x0080, 0x10, 9, 1),
-+ PIN_FIELD_BASE(43, 43, 7, 0x0080, 0x10, 8, 1),
-+ PIN_FIELD_BASE(44, 44, 7, 0x0080, 0x10, 10, 1),
-+ PIN_FIELD_BASE(45, 45, 7, 0x0080, 0x10, 22, 1),
-+ PIN_FIELD_BASE(46, 46, 7, 0x0080, 0x10, 21, 1),
-+ PIN_FIELD_BASE(47, 47, 7, 0x0080, 0x10, 20, 1),
-+ PIN_FIELD_BASE(48, 48, 7, 0x0090, 0x10, 3, 1),
-+ PIN_FIELD_BASE(49, 49, 7, 0x0090, 0x10, 5, 1),
-+ PIN_FIELD_BASE(50, 50, 7, 0x0090, 0x10, 2, 1),
-+ PIN_FIELD_BASE(51, 51, 7, 0x0090, 0x10, 4, 1),
-+ PIN_FIELD_BASE(52, 52, 7, 0x0080, 0x10, 1, 1),
-+ PIN_FIELD_BASE(53, 53, 7, 0x0080, 0x10, 0, 1),
-+ PIN_FIELD_BASE(54, 54, 7, 0x0080, 0x10, 5, 1),
-+ PIN_FIELD_BASE(55, 55, 7, 0x0080, 0x10, 3, 1),
-+ PIN_FIELD_BASE(56, 56, 7, 0x0080, 0x10, 4, 1),
-+ PIN_FIELD_BASE(57, 57, 7, 0x0080, 0x10, 2, 1),
-+ PIN_FIELD_BASE(58, 58, 7, 0x0090, 0x10, 0, 1),
-+ PIN_FIELD_BASE(59, 59, 7, 0x0080, 0x10, 31, 1),
-+ PIN_FIELD_BASE(60, 60, 7, 0x0080, 0x10, 30, 1),
-+ PIN_FIELD_BASE(61, 61, 3, 0x0050, 0x10, 18, 1),
-+ PIN_FIELD_BASE(62, 62, 3, 0x0050, 0x10, 14, 1),
-+ PIN_FIELD_BASE(63, 63, 3, 0x0050, 0x10, 17, 1),
-+ PIN_FIELD_BASE(64, 64, 3, 0x0050, 0x10, 13, 1),
-+ PIN_FIELD_BASE(65, 65, 3, 0x0050, 0x10, 20, 1),
-+ PIN_FIELD_BASE(66, 66, 3, 0x0050, 0x10, 16, 1),
-+ PIN_FIELD_BASE(67, 67, 3, 0x0050, 0x10, 19, 1),
-+ PIN_FIELD_BASE(68, 68, 3, 0x0050, 0x10, 15, 1),
-+ PIN_FIELD_BASE(69, 69, 3, 0x0050, 0x10, 8, 1),
-+ PIN_FIELD_BASE(70, 70, 3, 0x0050, 0x10, 7, 1),
-+ PIN_FIELD_BASE(71, 71, 3, 0x0050, 0x10, 6, 1),
-+ PIN_FIELD_BASE(72, 72, 3, 0x0050, 0x10, 5, 1),
-+ PIN_FIELD_BASE(73, 73, 3, 0x0050, 0x10, 4, 1),
-+ PIN_FIELD_BASE(74, 74, 3, 0x0050, 0x10, 3, 1),
-+ PIN_FIELD_BASE(75, 75, 3, 0x0050, 0x10, 2, 1),
-+ PIN_FIELD_BASE(76, 76, 3, 0x0050, 0x10, 1, 1),
-+ PIN_FIELD_BASE(77, 77, 3, 0x0050, 0x10, 0, 1),
-+ PIN_FIELD_BASE(78, 78, 3, 0x0050, 0x10, 9, 1),
-+ PIN_FIELD_BASE(79, 79, 3, 0x0050, 0x10, 11, 1),
-+ PIN_FIELD_BASE(80, 80, 3, 0x0050, 0x10, 10, 1),
-+ PIN_FIELD_BASE(81, 81, 3, 0x0050, 0x10, 25, 1),
-+ PIN_FIELD_BASE(82, 82, 3, 0x0050, 0x10, 24, 1),
-+ PIN_FIELD_BASE(83, 83, 3, 0x0050, 0x10, 22, 1),
-+ PIN_FIELD_BASE(84, 84, 3, 0x0050, 0x10, 23, 1),
-+ PIN_FIELD_BASE(85, 85, 7, 0x0090, 0x10, 1, 1),
-+ PIN_FIELD_BASE(86, 86, 7, 0x0080, 0x10, 29, 1),
-+ PIN_FIELD_BASE(87, 87, 7, 0x0080, 0x10, 7, 1),
-+ PIN_FIELD_BASE(88, 88, 7, 0x0080, 0x10, 6, 1),
-+ PIN_FIELD_BASE(89, 89, 2, 0x0060, 0x10, 21, 1),
-+ PINS_FIELD_BASE(90, 94, 3, 0x0050, 0x10, 21, 1),
-+ PIN_FIELD_BASE(95, 95, 2, 0x0060, 0x10, 22, 1),
-+ PIN_FIELD_BASE(96, 96, 2, 0x0060, 0x10, 23, 1),
-+ PIN_FIELD_BASE(97, 97, 2, 0x0060, 0x10, 2, 1),
-+ PIN_FIELD_BASE(98, 98, 2, 0x0060, 0x10, 3, 1),
-+ PIN_FIELD_BASE(99, 99, 2, 0x0060, 0x10, 0, 1),
-+ PIN_FIELD_BASE(100, 100, 2, 0x0060, 0x10, 1, 1),
-+ PIN_FIELD_BASE(101, 101, 2, 0x0060, 0x10, 4, 1),
-+ PIN_FIELD_BASE(102, 102, 2, 0x0060, 0x10, 5, 1),
-+ PIN_FIELD_BASE(103, 103, 2, 0x0060, 0x10, 17, 1),
-+ PIN_FIELD_BASE(104, 104, 2, 0x0060, 0x10, 19, 1),
-+ PIN_FIELD_BASE(105, 105, 2, 0x0060, 0x10, 18, 1),
-+ PIN_FIELD_BASE(106, 106, 2, 0x0060, 0x10, 20, 1),
-+ PIN_FIELD_BASE(107, 107, 1, 0x0050, 0x10, 4, 1),
-+ PIN_FIELD_BASE(108, 108, 1, 0x0050, 0x10, 3, 1),
-+ PIN_FIELD_BASE(109, 109, 1, 0x0050, 0x10, 5, 1),
-+ PIN_FIELD_BASE(110, 110, 1, 0x0050, 0x10, 0, 1),
-+ PIN_FIELD_BASE(111, 111, 1, 0x0050, 0x10, 1, 1),
-+ PIN_FIELD_BASE(112, 112, 1, 0x0050, 0x10, 2, 1),
-+ PIN_FIELD_BASE(113, 113, 1, 0x0050, 0x10, 9, 1),
-+ PIN_FIELD_BASE(114, 114, 1, 0x0050, 0x10, 10, 1),
-+ PIN_FIELD_BASE(115, 115, 1, 0x0050, 0x10, 6, 1),
-+ PIN_FIELD_BASE(116, 116, 1, 0x0050, 0x10, 7, 1),
-+ PIN_FIELD_BASE(117, 117, 1, 0x0050, 0x10, 12, 1),
-+ PIN_FIELD_BASE(118, 118, 1, 0x0050, 0x10, 13, 1),
-+ PIN_FIELD_BASE(119, 119, 1, 0x0050, 0x10, 14, 1),
-+ PIN_FIELD_BASE(120, 120, 1, 0x0050, 0x10, 11, 1),
-+ PINS_FIELD_BASE(121, 133, 1, 0x0050, 0x10, 8, 1),
-+ PIN_FIELD_BASE(134, 134, 5, 0x0040, 0x10, 14, 1),
-+ PIN_FIELD_BASE(135, 135, 5, 0x0040, 0x10, 19, 1),
-+ PIN_FIELD_BASE(136, 136, 5, 0x0040, 0x10, 1, 1),
-+ PIN_FIELD_BASE(137, 137, 5, 0x0040, 0x10, 7, 1),
-+ PIN_FIELD_BASE(138, 138, 5, 0x0040, 0x10, 4, 1),
-+ PIN_FIELD_BASE(139, 139, 5, 0x0040, 0x10, 5, 1),
-+ PIN_FIELD_BASE(140, 140, 5, 0x0040, 0x10, 0, 1),
-+ PIN_FIELD_BASE(141, 141, 5, 0x0040, 0x10, 6, 1),
-+ PIN_FIELD_BASE(142, 142, 5, 0x0040, 0x10, 2, 1),
-+ PIN_FIELD_BASE(143, 143, 5, 0x0040, 0x10, 3, 1),
-+ PIN_FIELD_BASE(144, 144, 5, 0x0040, 0x10, 12, 1),
-+ PIN_FIELD_BASE(145, 145, 5, 0x0040, 0x10, 11, 1),
-+ PIN_FIELD_BASE(146, 146, 5, 0x0040, 0x10, 13, 1),
-+ PIN_FIELD_BASE(147, 147, 5, 0x0040, 0x10, 10, 1),
-+ PIN_FIELD_BASE(148, 148, 5, 0x0040, 0x10, 15, 1),
-+ PIN_FIELD_BASE(149, 149, 5, 0x0040, 0x10, 16, 1),
-+ PIN_FIELD_BASE(150, 150, 7, 0x0080, 0x10, 23, 1),
-+ PIN_FIELD_BASE(151, 151, 7, 0x0080, 0x10, 24, 1),
-+ PIN_FIELD_BASE(152, 152, 7, 0x0080, 0x10, 25, 1),
-+ PIN_FIELD_BASE(153, 153, 7, 0x0080, 0x10, 26, 1),
-+ PIN_FIELD_BASE(154, 154, 7, 0x0080, 0x10, 28, 1),
-+ PIN_FIELD_BASE(155, 155, 3, 0x0050, 0x10, 28, 1),
-+ PIN_FIELD_BASE(156, 156, 3, 0x0050, 0x10, 27, 1),
-+ PIN_FIELD_BASE(157, 157, 3, 0x0050, 0x10, 29, 1),
-+ PIN_FIELD_BASE(158, 158, 3, 0x0050, 0x10, 26, 1),
-+ PIN_FIELD_BASE(159, 159, 7, 0x0080, 0x10, 27, 1),
-+ PIN_FIELD_BASE(160, 160, 5, 0x0040, 0x10, 8, 1),
-+ PIN_FIELD_BASE(161, 161, 1, 0x0050, 0x10, 15, 1),
-+ PIN_FIELD_BASE(162, 162, 1, 0x0050, 0x10, 16, 1),
-+ PIN_FIELD_BASE(163, 163, 4, 0x0040, 0x10, 0, 1),
-+ PIN_FIELD_BASE(164, 164, 4, 0x0040, 0x10, 1, 1),
-+ PIN_FIELD_BASE(165, 165, 4, 0x0040, 0x10, 2, 1),
-+ PIN_FIELD_BASE(166, 166, 4, 0x0040, 0x10, 3, 1),
-+ PIN_FIELD_BASE(167, 167, 4, 0x0040, 0x10, 4, 1),
-+ PIN_FIELD_BASE(168, 168, 4, 0x0040, 0x10, 5, 1),
-+ PIN_FIELD_BASE(169, 169, 4, 0x0040, 0x10, 6, 1),
-+ PIN_FIELD_BASE(170, 170, 4, 0x0040, 0x10, 7, 1),
-+ PIN_FIELD_BASE(171, 171, 7, 0x0080, 0x10, 17, 1),
-+ PIN_FIELD_BASE(172, 172, 7, 0x0080, 0x10, 18, 1),
-+ PIN_FIELD_BASE(173, 173, 7, 0x0080, 0x10, 11, 1),
-+ PIN_FIELD_BASE(174, 174, 7, 0x0080, 0x10, 12, 1),
-+ PIN_FIELD_BASE(175, 175, 7, 0x0080, 0x10, 13, 1),
-+ PIN_FIELD_BASE(176, 176, 7, 0x0080, 0x10, 14, 1),
-+ PIN_FIELD_BASE(177, 177, 7, 0x0080, 0x10, 15, 1),
-+ PINS_FIELD_BASE(178, 179, 7, 0x0080, 0x10, 16, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt6765_pin_tdsel_range[] = {
-+ PINS_FIELD_BASE(0, 3, 2, 0x00c0, 0x10, 16, 4),
-+ PINS_FIELD_BASE(4, 7, 2, 0x00c0, 0x10, 20, 4),
-+ PIN_FIELD_BASE(8, 8, 3, 0x0090, 0x10, 12, 4),
-+ PINS_FIELD_BASE(9, 11, 2, 0x00c0, 0x10, 24, 4),
-+ PIN_FIELD_BASE(12, 12, 5, 0x0080, 0x10, 4, 4),
-+ PINS_FIELD_BASE(13, 16, 6, 0x00e0, 0x10, 8, 4),
-+ PINS_FIELD_BASE(17, 20, 6, 0x00e0, 0x10, 0, 4),
-+ PINS_FIELD_BASE(21, 24, 6, 0x00e0, 0x10, 4, 4),
-+ PINS_FIELD_BASE(25, 28, 6, 0x00d0, 0x10, 28, 4),
-+ PIN_FIELD_BASE(29, 29, 6, 0x00d0, 0x10, 0, 4),
-+ PIN_FIELD_BASE(30, 30, 6, 0x00d0, 0x10, 4, 4),
-+ PINS_FIELD_BASE(31, 34, 6, 0x00d0, 0x10, 8, 4),
-+ PINS_FIELD_BASE(35, 36, 6, 0x00d0, 0x10, 20, 4),
-+ PIN_FIELD_BASE(37, 37, 6, 0x00d0, 0x10, 24, 4),
-+ PIN_FIELD_BASE(38, 38, 6, 0x00d0, 0x10, 16, 4),
-+ PINS_FIELD_BASE(39, 40, 6, 0x00d0, 0x10, 12, 4),
-+ PINS_FIELD_BASE(41, 42, 7, 0x00d0, 0x10, 24, 4),
-+ PIN_FIELD_BASE(43, 43, 7, 0x00d0, 0x10, 12, 4),
-+ PIN_FIELD_BASE(44, 44, 7, 0x00d0, 0x10, 16, 4),
-+ PIN_FIELD_BASE(45, 45, 7, 0x00e0, 0x10, 0, 4),
-+ PINS_FIELD_BASE(46, 47, 7, 0x00d0, 0x10, 28, 4),
-+ PINS_FIELD_BASE(48, 49, 7, 0x00e0, 0x10, 28, 4),
-+ PINS_FIELD_BASE(50, 51, 7, 0x00e0, 0x10, 24, 4),
-+ PINS_FIELD_BASE(52, 57, 7, 0x00d0, 0x10, 0, 4),
-+ PINS_FIELD_BASE(58, 60, 7, 0x00e0, 0x10, 16, 4),
-+ PINS_FIELD_BASE(61, 62, 3, 0x0090, 0x10, 20, 4),
-+ PINS_FIELD_BASE(63, 64, 3, 0x0090, 0x10, 16, 4),
-+ PINS_FIELD_BASE(65, 66, 3, 0x0090, 0x10, 28, 4),
-+ PINS_FIELD_BASE(67, 68, 3, 0x0090, 0x10, 24, 4),
-+ PINS_FIELD_BASE(69, 73, 3, 0x0090, 0x10, 4, 4),
-+ PINS_FIELD_BASE(74, 78, 3, 0x0090, 0x10, 8, 4),
-+ PINS_FIELD_BASE(79, 80, 3, 0x0090, 0x10, 0, 4),
-+ PIN_FIELD_BASE(81, 81, 3, 0x00a0, 0x10, 8, 4),
-+ PINS_FIELD_BASE(82, 83, 3, 0x00a0, 0x10, 4, 4),
-+ PIN_FIELD_BASE(84, 84, 3, 0x00a0, 0x10, 8, 4),
-+ PIN_FIELD_BASE(85, 85, 7, 0x00e0, 0x10, 16, 4),
-+ PIN_FIELD_BASE(86, 86, 7, 0x00e0, 0x10, 20, 4),
-+ PIN_FIELD_BASE(87, 87, 7, 0x00d0, 0x10, 8, 4),
-+ PIN_FIELD_BASE(88, 88, 7, 0x00d0, 0x10, 4, 4),
-+ PIN_FIELD_BASE(89, 89, 2, 0x00d0, 0x10, 12, 4),
-+ PIN_FIELD_BASE(90, 90, 3, 0x00a0, 0x10, 0, 4),
-+ PINS_FIELD_BASE(91, 92, 2, 0x00d0, 0x10, 0, 4),
-+ PINS_FIELD_BASE(93, 94, 2, 0x00c0, 0x10, 28, 4),
-+ PINS_FIELD_BASE(95, 96, 2, 0x00d0, 0x10, 16, 4),
-+ PINS_FIELD_BASE(97, 98, 2, 0x00c0, 0x10, 8, 4),
-+ PIN_FIELD_BASE(99, 99, 2, 0x00c0, 0x10, 0, 4),
-+ PIN_FIELD_BASE(100, 100, 2, 0x00c0, 0x10, 4, 4),
-+ PINS_FIELD_BASE(101, 102, 2, 0x00c0, 0x10, 12, 4),
-+ PINS_FIELD_BASE(103, 104, 2, 0x00d0, 0x10, 4, 4),
-+ PINS_FIELD_BASE(105, 106, 2, 0x00d0, 0x10, 8, 4),
-+ PIN_FIELD_BASE(107, 107, 1, 0x0090, 0x10, 16, 4),
-+ PIN_FIELD_BASE(108, 108, 1, 0x0090, 0x10, 12, 4),
-+ PIN_FIELD_BASE(109, 109, 1, 0x0090, 0x10, 20, 4),
-+ PIN_FIELD_BASE(110, 110, 1, 0x0090, 0x10, 0, 4),
-+ PIN_FIELD_BASE(111, 111, 1, 0x0090, 0x10, 4, 4),
-+ PIN_FIELD_BASE(112, 112, 1, 0x0090, 0x10, 8, 4),
-+ PIN_FIELD_BASE(113, 113, 1, 0x00a0, 0x10, 4, 4),
-+ PIN_FIELD_BASE(114, 114, 1, 0x00a0, 0x10, 8, 4),
-+ PIN_FIELD_BASE(115, 115, 1, 0x0090, 0x10, 24, 4),
-+ PIN_FIELD_BASE(116, 116, 1, 0x0090, 0x10, 28, 4),
-+ PIN_FIELD_BASE(117, 117, 1, 0x00a0, 0x10, 16, 4),
-+ PIN_FIELD_BASE(118, 118, 1, 0x00a0, 0x10, 20, 4),
-+ PIN_FIELD_BASE(119, 119, 1, 0x00a0, 0x10, 24, 4),
-+ PIN_FIELD_BASE(120, 120, 1, 0x00a0, 0x10, 12, 4),
-+ PIN_FIELD_BASE(121, 121, 1, 0x00a0, 0x10, 0, 4),
-+ PIN_FIELD_BASE(122, 122, 4, 0x0090, 0x10, 8, 4),
-+ PIN_FIELD_BASE(123, 123, 4, 0x0090, 0x10, 12, 4),
-+ PIN_FIELD_BASE(124, 124, 4, 0x0090, 0x10, 4, 4),
-+ PINS_FIELD_BASE(125, 130, 4, 0x0090, 0x10, 12, 4),
-+ PIN_FIELD_BASE(131, 131, 4, 0x0090, 0x10, 16, 4),
-+ PIN_FIELD_BASE(132, 132, 4, 0x0090, 0x10, 12, 4),
-+ PIN_FIELD_BASE(133, 133, 4, 0x0090, 0x10, 20, 4),
-+ PIN_FIELD_BASE(134, 134, 5, 0x0080, 0x10, 12, 4),
-+ PIN_FIELD_BASE(135, 135, 5, 0x0080, 0x10, 20, 4),
-+ PIN_FIELD_BASE(136, 136, 5, 0x0070, 0x10, 4, 4),
-+ PIN_FIELD_BASE(137, 137, 5, 0x0070, 0x10, 28, 4),
-+ PIN_FIELD_BASE(138, 138, 5, 0x0070, 0x10, 16, 4),
-+ PIN_FIELD_BASE(139, 139, 5, 0x0070, 0x10, 20, 4),
-+ PIN_FIELD_BASE(140, 140, 5, 0x0070, 0x10, 0, 4),
-+ PIN_FIELD_BASE(141, 141, 5, 0x0070, 0x10, 24, 4),
-+ PIN_FIELD_BASE(142, 142, 5, 0x0070, 0x10, 8, 4),
-+ PIN_FIELD_BASE(143, 143, 5, 0x0070, 0x10, 12, 4),
-+ PINS_FIELD_BASE(144, 147, 5, 0x0080, 0x10, 8, 4),
-+ PINS_FIELD_BASE(148, 149, 5, 0x0080, 0x10, 16, 4),
-+ PINS_FIELD_BASE(150, 151, 7, 0x00e0, 0x10, 4, 4),
-+ PINS_FIELD_BASE(152, 153, 7, 0x00e0, 0x10, 8, 4),
-+ PIN_FIELD_BASE(154, 154, 7, 0x00e0, 0x10, 12, 4),
-+ PINS_FIELD_BASE(155, 158, 3, 0x00a0, 0x10, 12, 4),
-+ PIN_FIELD_BASE(159, 159, 7, 0x00e0, 0x10, 12, 4),
-+ PIN_FIELD_BASE(160, 160, 5, 0x0080, 0x10, 0, 4),
-+ PINS_FIELD_BASE(161, 162, 1, 0x00a0, 0x10, 28, 4),
-+ PINS_FIELD_BASE(163, 170, 4, 0x0090, 0x10, 0, 4),
-+ PINS_FIELD_BASE(171, 179, 7, 0x00d0, 0x10, 20, 4),
-+};
-+
-+static const struct mtk_pin_field_calc mt6765_pin_rdsel_range[] = {
-+ PINS_FIELD_BASE(0, 3, 2, 0x0090, 0x10, 8, 2),
-+ PINS_FIELD_BASE(4, 7, 2, 0x0090, 0x10, 10, 2),
-+ PIN_FIELD_BASE(8, 8, 3, 0x0060, 0x10, 6, 2),
-+ PINS_FIELD_BASE(9, 11, 2, 0x0090, 0x10, 12, 2),
-+ PIN_FIELD_BASE(12, 12, 5, 0x0050, 0x10, 18, 2),
-+ PINS_FIELD_BASE(13, 16, 6, 0x00a0, 0x10, 18, 2),
-+ PINS_FIELD_BASE(17, 20, 6, 0x00a0, 0x10, 14, 2),
-+ PINS_FIELD_BASE(21, 24, 6, 0x00a0, 0x10, 16, 2),
-+ PINS_FIELD_BASE(25, 28, 6, 0x00a0, 0x10, 12, 2),
-+ PIN_FIELD_BASE(29, 29, 6, 0x0090, 0x10, 0, 6),
-+ PIN_FIELD_BASE(30, 30, 6, 0x0090, 0x10, 6, 6),
-+ PINS_FIELD_BASE(31, 34, 6, 0x0090, 0x10, 12, 6),
-+ PINS_FIELD_BASE(35, 36, 6, 0x00a0, 0x10, 0, 6),
-+ PIN_FIELD_BASE(37, 37, 6, 0x00a0, 0x10, 6, 6),
-+ PIN_FIELD_BASE(38, 38, 6, 0x0090, 0x10, 24, 6),
-+ PINS_FIELD_BASE(39, 40, 6, 0x0090, 0x10, 18, 6),
-+ PINS_FIELD_BASE(41, 42, 7, 0x00a0, 0x10, 12, 2),
-+ PIN_FIELD_BASE(43, 43, 7, 0x00a0, 0x10, 6, 2),
-+ PIN_FIELD_BASE(44, 44, 7, 0x00a0, 0x10, 8, 2),
-+ PIN_FIELD_BASE(45, 45, 7, 0x00a0, 0x10, 16, 2),
-+ PINS_FIELD_BASE(46, 47, 7, 0x00a0, 0x10, 14, 2),
-+ PINS_FIELD_BASE(48, 49, 7, 0x00a0, 0x10, 30, 2),
-+ PINS_FIELD_BASE(50, 51, 7, 0x00a0, 0x10, 28, 2),
-+ PINS_FIELD_BASE(52, 57, 7, 0x00a0, 0x10, 0, 2),
-+ PINS_FIELD_BASE(58, 60, 7, 0x00a0, 0x10, 24, 2),
-+ PINS_FIELD_BASE(61, 62, 3, 0x0060, 0x10, 10, 2),
-+ PINS_FIELD_BASE(63, 64, 3, 0x0060, 0x10, 8, 2),
-+ PINS_FIELD_BASE(65, 66, 3, 0x0060, 0x10, 14, 2),
-+ PINS_FIELD_BASE(67, 68, 3, 0x0060, 0x10, 12, 2),
-+ PINS_FIELD_BASE(69, 73, 3, 0x0060, 0x10, 2, 2),
-+ PINS_FIELD_BASE(74, 78, 3, 0x0060, 0x10, 4, 2),
-+ PINS_FIELD_BASE(79, 80, 3, 0x0060, 0x10, 0, 2),
-+ PIN_FIELD_BASE(81, 81, 3, 0x0060, 0x10, 20, 2),
-+ PINS_FIELD_BASE(82, 83, 3, 0x0060, 0x10, 18, 2),
-+ PIN_FIELD_BASE(84, 84, 3, 0x0060, 0x10, 20, 2),
-+ PIN_FIELD_BASE(85, 85, 7, 0x00a0, 0x10, 24, 2),
-+ PIN_FIELD_BASE(86, 86, 7, 0x00a0, 0x10, 26, 2),
-+ PIN_FIELD_BASE(87, 87, 7, 0x00a0, 0x10, 4, 2),
-+ PIN_FIELD_BASE(88, 88, 7, 0x00a0, 0x10, 2, 2),
-+ PIN_FIELD_BASE(89, 89, 2, 0x0090, 0x10, 22, 2),
-+ PIN_FIELD_BASE(90, 90, 3, 0x0060, 0x10, 16, 2),
-+ PINS_FIELD_BASE(91, 92, 2, 0x0090, 0x10, 16, 2),
-+ PINS_FIELD_BASE(93, 94, 2, 0x0090, 0x10, 14, 2),
-+ PINS_FIELD_BASE(95, 96, 2, 0x0090, 0x10, 24, 2),
-+ PINS_FIELD_BASE(97, 98, 2, 0x0090, 0x10, 4, 2),
-+ PIN_FIELD_BASE(99, 99, 2, 0x0090, 0x10, 0, 2),
-+ PIN_FIELD_BASE(100, 100, 2, 0x0090, 0x10, 2, 2),
-+ PINS_FIELD_BASE(101, 102, 2, 0x0090, 0x10, 6, 2),
-+ PINS_FIELD_BASE(103, 104, 2, 0x0090, 0x10, 18, 2),
-+ PINS_FIELD_BASE(105, 106, 2, 0x0090, 0x10, 20, 2),
-+ PIN_FIELD_BASE(107, 107, 1, 0x0060, 0x10, 8, 2),
-+ PIN_FIELD_BASE(108, 108, 1, 0x0060, 0x10, 6, 2),
-+ PIN_FIELD_BASE(109, 109, 1, 0x0060, 0x10, 10, 2),
-+ PIN_FIELD_BASE(110, 110, 1, 0x0060, 0x10, 0, 2),
-+ PIN_FIELD_BASE(111, 111, 1, 0x0060, 0x10, 2, 2),
-+ PIN_FIELD_BASE(112, 112, 1, 0x0060, 0x10, 4, 2),
-+ PIN_FIELD_BASE(113, 113, 1, 0x0060, 0x10, 18, 2),
-+ PIN_FIELD_BASE(114, 114, 1, 0x0060, 0x10, 20, 2),
-+ PIN_FIELD_BASE(115, 115, 1, 0x0060, 0x10, 12, 2),
-+ PIN_FIELD_BASE(116, 116, 1, 0x0060, 0x10, 14, 2),
-+ PIN_FIELD_BASE(117, 117, 1, 0x0060, 0x10, 24, 2),
-+ PIN_FIELD_BASE(118, 118, 1, 0x0060, 0x10, 26, 2),
-+ PIN_FIELD_BASE(119, 119, 1, 0x0060, 0x10, 28, 2),
-+ PIN_FIELD_BASE(120, 120, 1, 0x0060, 0x10, 22, 2),
-+ PIN_FIELD_BASE(121, 121, 1, 0x0060, 0x10, 16, 2),
-+ PIN_FIELD_BASE(122, 122, 4, 0x0070, 0x10, 8, 6),
-+ PIN_FIELD_BASE(123, 123, 4, 0x0070, 0x10, 14, 6),
-+ PIN_FIELD_BASE(124, 124, 4, 0x0070, 0x10, 2, 6),
-+ PINS_FIELD_BASE(125, 130, 4, 0x0070, 0x10, 14, 6),
-+ PIN_FIELD_BASE(131, 131, 4, 0x0070, 0x10, 20, 6),
-+ PIN_FIELD_BASE(132, 132, 4, 0x0070, 0x10, 14, 6),
-+ PIN_FIELD_BASE(133, 133, 4, 0x0070, 0x10, 26, 6),
-+ PIN_FIELD_BASE(134, 134, 5, 0x0050, 0x10, 22, 2),
-+ PIN_FIELD_BASE(135, 135, 5, 0x0050, 0x10, 30, 2),
-+ PIN_FIELD_BASE(136, 136, 5, 0x0050, 0x10, 2, 2),
-+ PIN_FIELD_BASE(137, 137, 5, 0x0050, 0x10, 14, 2),
-+ PIN_FIELD_BASE(138, 138, 5, 0x0050, 0x10, 8, 2),
-+ PIN_FIELD_BASE(139, 139, 5, 0x0050, 0x10, 10, 2),
-+ PIN_FIELD_BASE(140, 140, 5, 0x0050, 0x10, 0, 2),
-+ PIN_FIELD_BASE(141, 141, 5, 0x0050, 0x10, 12, 2),
-+ PIN_FIELD_BASE(142, 142, 5, 0x0050, 0x10, 4, 2),
-+ PIN_FIELD_BASE(143, 143, 5, 0x0050, 0x10, 6, 2),
-+ PINS_FIELD_BASE(144, 147, 5, 0x0050, 0x10, 20, 2),
-+ PINS_FIELD_BASE(148, 149, 5, 0x0050, 0x10, 24, 2),
-+ PINS_FIELD_BASE(150, 151, 7, 0x00a0, 0x10, 18, 2),
-+ PINS_FIELD_BASE(152, 153, 7, 0x00a0, 0x10, 20, 2),
-+ PIN_FIELD_BASE(154, 154, 7, 0x00a0, 0x10, 22, 2),
-+ PINS_FIELD_BASE(155, 158, 3, 0x0060, 0x10, 22, 2),
-+ PIN_FIELD_BASE(159, 159, 7, 0x00a0, 0x10, 22, 2),
-+ PIN_FIELD_BASE(160, 160, 5, 0x0050, 0x10, 16, 2),
-+ PINS_FIELD_BASE(161, 162, 1, 0x0060, 0x10, 30, 2),
-+ PINS_FIELD_BASE(163, 170, 4, 0x0070, 0x10, 0, 2),
-+ PINS_FIELD_BASE(171, 179, 7, 0x00a0, 0x10, 10, 2),
-+};
-+
-+static const struct mtk_pin_field_calc mt6765_pin_drv_range[] = {
-+ PINS_FIELD_BASE(0, 2, 2, 0x0000, 0x10, 12, 3),
-+ PIN_FIELD_BASE(3, 3, 2, 0x0000, 0x10, 15, 3),
-+ PINS_FIELD_BASE(4, 6, 2, 0x0000, 0x10, 18, 3),
-+ PIN_FIELD_BASE(7, 7, 2, 0x0000, 0x10, 21, 3),
-+ PIN_FIELD_BASE(8, 8, 3, 0x0000, 0x10, 9, 3),
-+ PINS_FIELD_BASE(9, 11, 2, 0x0000, 0x10, 24, 3),
-+ PIN_FIELD_BASE(12, 12, 5, 0x0000, 0x10, 27, 3),
-+ PINS_FIELD_BASE(13, 15, 6, 0x0010, 0x10, 3, 3),
-+ PIN_FIELD_BASE(16, 16, 6, 0x0010, 0x10, 6, 3),
-+ PIN_FIELD_BASE(17, 17, 6, 0x0000, 0x10, 23, 3),
-+ PIN_FIELD_BASE(18, 18, 6, 0x0000, 0x10, 26, 3),
-+ PINS_FIELD_BASE(19, 20, 6, 0x0000, 0x10, 23, 3),
-+ PINS_FIELD_BASE(21, 23, 6, 0x0000, 0x10, 29, 3),
-+ PIN_FIELD_BASE(24, 24, 6, 0x0010, 0x10, 0, 3),
-+ PINS_FIELD_BASE(25, 27, 6, 0x0000, 0x10, 17, 3),
-+ PIN_FIELD_BASE(28, 28, 6, 0x0000, 0x10, 20, 3),
-+ PIN_FIELD_BASE(29, 29, 6, 0x0000, 0x10, 0, 3),
-+ PIN_FIELD_BASE(30, 30, 6, 0x0000, 0x10, 3, 3),
-+ PINS_FIELD_BASE(31, 34, 6, 0x0000, 0x10, 6, 3),
-+ PINS_FIELD_BASE(35, 36, 6, 0x0000, 0x10, 13, 2),
-+ PIN_FIELD_BASE(37, 37, 6, 0x0000, 0x10, 15, 2),
-+ PIN_FIELD_BASE(38, 38, 6, 0x0000, 0x10, 11, 2),
-+ PINS_FIELD_BASE(39, 40, 6, 0x0000, 0x10, 9, 2),
-+ PINS_FIELD_BASE(41, 42, 7, 0x0000, 0x10, 21, 3),
-+ PIN_FIELD_BASE(43, 43, 7, 0x0000, 0x10, 9, 3),
-+ PIN_FIELD_BASE(44, 44, 7, 0x0000, 0x10, 12, 3),
-+ PIN_FIELD_BASE(45, 45, 7, 0x0000, 0x10, 27, 3),
-+ PINS_FIELD_BASE(46, 47, 7, 0x0000, 0x10, 24, 3),
-+ PINS_FIELD_BASE(48, 49, 7, 0x0010, 0x10, 18, 3),
-+ PINS_FIELD_BASE(50, 51, 7, 0x0010, 0x10, 15, 3),
-+ PINS_FIELD_BASE(52, 57, 7, 0x0000, 0x10, 0, 3),
-+ PINS_FIELD_BASE(58, 60, 7, 0x0010, 0x10, 9, 3),
-+ PINS_FIELD_BASE(61, 62, 3, 0x0000, 0x10, 15, 3),
-+ PINS_FIELD_BASE(63, 64, 3, 0x0000, 0x10, 12, 3),
-+ PINS_FIELD_BASE(65, 66, 3, 0x0000, 0x10, 21, 3),
-+ PINS_FIELD_BASE(67, 68, 3, 0x0000, 0x10, 18, 3),
-+ PINS_FIELD_BASE(69, 73, 3, 0x0000, 0x10, 3, 3),
-+ PINS_FIELD_BASE(74, 78, 3, 0x0000, 0x10, 6, 3),
-+ PINS_FIELD_BASE(79, 80, 3, 0x0000, 0x10, 0, 3),
-+ PIN_FIELD_BASE(81, 81, 3, 0x0010, 0x10, 0, 3),
-+ PINS_FIELD_BASE(82, 83, 3, 0x0000, 0x10, 27, 3),
-+ PIN_FIELD_BASE(84, 84, 3, 0x0010, 0x10, 0, 3),
-+ PIN_FIELD_BASE(85, 85, 7, 0x0010, 0x10, 9, 3),
-+ PIN_FIELD_BASE(86, 86, 7, 0x0010, 0x10, 12, 3),
-+ PIN_FIELD_BASE(87, 87, 7, 0x0000, 0x10, 6, 3),
-+ PIN_FIELD_BASE(88, 88, 7, 0x0000, 0x10, 3, 3),
-+ PIN_FIELD_BASE(89, 89, 2, 0x0010, 0x10, 15, 3),
-+ PIN_FIELD_BASE(90, 90, 3, 0x0000, 0x10, 24, 3),
-+ PIN_FIELD_BASE(91, 91, 2, 0x0010, 0x10, 6, 3),
-+ PIN_FIELD_BASE(92, 92, 2, 0x0010, 0x10, 3, 3),
-+ PIN_FIELD_BASE(93, 93, 2, 0x0000, 0x10, 27, 3),
-+ PIN_FIELD_BASE(94, 94, 2, 0x0010, 0x10, 0, 3),
-+ PINS_FIELD_BASE(95, 96, 2, 0x0010, 0x10, 18, 3),
-+ PINS_FIELD_BASE(97, 98, 2, 0x0000, 0x10, 6, 3),
-+ PIN_FIELD_BASE(99, 99, 2, 0x0000, 0x10, 0, 3),
-+ PIN_FIELD_BASE(100, 100, 2, 0x0000, 0x10, 3, 3),
-+ PINS_FIELD_BASE(101, 102, 2, 0x0000, 0x10, 9, 3),
-+ PINS_FIELD_BASE(103, 104, 2, 0x0010, 0x10, 9, 3),
-+ PINS_FIELD_BASE(105, 106, 2, 0x0010, 0x10, 12, 3),
-+ PIN_FIELD_BASE(107, 107, 1, 0x0000, 0x10, 12, 3),
-+ PIN_FIELD_BASE(108, 108, 1, 0x0000, 0x10, 9, 3),
-+ PIN_FIELD_BASE(109, 109, 1, 0x0000, 0x10, 15, 3),
-+ PIN_FIELD_BASE(110, 110, 1, 0x0000, 0x10, 0, 3),
-+ PIN_FIELD_BASE(111, 111, 1, 0x0000, 0x10, 3, 3),
-+ PIN_FIELD_BASE(112, 112, 1, 0x0000, 0x10, 6, 3),
-+ PIN_FIELD_BASE(113, 113, 1, 0x0000, 0x10, 27, 3),
-+ PIN_FIELD_BASE(114, 114, 1, 0x0010, 0x10, 0, 3),
-+ PIN_FIELD_BASE(115, 115, 1, 0x0000, 0x10, 18, 3),
-+ PIN_FIELD_BASE(116, 116, 1, 0x0000, 0x10, 21, 3),
-+ PIN_FIELD_BASE(117, 117, 1, 0x0010, 0x10, 6, 3),
-+ PIN_FIELD_BASE(118, 118, 1, 0x0010, 0x10, 9, 3),
-+ PIN_FIELD_BASE(119, 119, 1, 0x0010, 0x10, 12, 3),
-+ PIN_FIELD_BASE(120, 120, 1, 0x0010, 0x10, 3, 3),
-+ PIN_FIELD_BASE(121, 121, 1, 0x0000, 0x10, 24, 3),
-+ PIN_FIELD_BASE(122, 122, 4, 0x0000, 0x10, 9, 3),
-+ PIN_FIELD_BASE(123, 123, 4, 0x0000, 0x10, 12, 3),
-+ PIN_FIELD_BASE(124, 124, 4, 0x0000, 0x10, 6, 3),
-+ PINS_FIELD_BASE(125, 130, 4, 0x0000, 0x10, 12, 3),
-+ PIN_FIELD_BASE(131, 131, 4, 0x0000, 0x10, 15, 3),
-+ PIN_FIELD_BASE(132, 132, 4, 0x0000, 0x10, 12, 3),
-+ PIN_FIELD_BASE(133, 133, 4, 0x0000, 0x10, 18, 3),
-+ PIN_FIELD_BASE(134, 134, 5, 0x0010, 0x10, 6, 3),
-+ PIN_FIELD_BASE(135, 135, 5, 0x0010, 0x10, 12, 3),
-+ PIN_FIELD_BASE(136, 136, 5, 0x0000, 0x10, 3, 3),
-+ PIN_FIELD_BASE(137, 137, 5, 0x0000, 0x10, 21, 3),
-+ PIN_FIELD_BASE(138, 138, 5, 0x0000, 0x10, 12, 3),
-+ PIN_FIELD_BASE(139, 139, 5, 0x0000, 0x10, 15, 3),
-+ PIN_FIELD_BASE(140, 140, 5, 0x0000, 0x10, 0, 3),
-+ PIN_FIELD_BASE(141, 141, 5, 0x0000, 0x10, 18, 3),
-+ PIN_FIELD_BASE(142, 142, 5, 0x0000, 0x10, 6, 3),
-+ PIN_FIELD_BASE(143, 143, 5, 0x0000, 0x10, 9, 3),
-+ PINS_FIELD_BASE(144, 146, 5, 0x0010, 0x10, 0, 3),
-+ PIN_FIELD_BASE(147, 147, 5, 0x0010, 0x10, 3, 3),
-+ PINS_FIELD_BASE(148, 149, 5, 0x0010, 0x10, 9, 3),
-+ PINS_FIELD_BASE(150, 151, 7, 0x0010, 0x10, 0, 3),
-+ PINS_FIELD_BASE(152, 153, 7, 0x0010, 0x10, 3, 3),
-+ PIN_FIELD_BASE(154, 154, 7, 0x0010, 0x10, 6, 3),
-+ PINS_FIELD_BASE(155, 157, 3, 0x0010, 0x10, 3, 3),
-+ PIN_FIELD_BASE(158, 158, 3, 0x0010, 0x10, 6, 3),
-+ PIN_FIELD_BASE(159, 159, 7, 0x0010, 0x10, 6, 3),
-+ PIN_FIELD_BASE(160, 160, 5, 0x0000, 0x10, 24, 3),
-+ PINS_FIELD_BASE(161, 162, 1, 0x0010, 0x10, 15, 3),
-+ PINS_FIELD_BASE(163, 166, 4, 0x0000, 0x10, 0, 3),
-+ PINS_FIELD_BASE(167, 170, 4, 0x0000, 0x10, 3, 3),
-+ PINS_FIELD_BASE(171, 174, 7, 0x0000, 0x10, 18, 3),
-+ PINS_FIELD_BASE(175, 179, 7, 0x0000, 0x10, 15, 3),
-+};
-+
-+static const struct mtk_pin_field_calc mt6765_pin_pupd_range[] = {
-+ PINS_FIELD_BASE(0, 28, 0, 0x0050, 0x10, 18, 1),
-+ PIN_FIELD_BASE(29, 29, 6, 0x0050, 0x10, 0, 1),
-+ PIN_FIELD_BASE(30, 30, 6, 0x0050, 0x10, 1, 1),
-+ PIN_FIELD_BASE(31, 31, 6, 0x0050, 0x10, 5, 1),
-+ PIN_FIELD_BASE(32, 32, 6, 0x0050, 0x10, 2, 1),
-+ PIN_FIELD_BASE(33, 33, 6, 0x0050, 0x10, 4, 1),
-+ PIN_FIELD_BASE(34, 34, 6, 0x0050, 0x10, 3, 1),
-+ PIN_FIELD_BASE(35, 35, 6, 0x0050, 0x10, 10, 1),
-+ PIN_FIELD_BASE(36, 36, 6, 0x0050, 0x10, 11, 1),
-+ PIN_FIELD_BASE(37, 37, 6, 0x0050, 0x10, 9, 1),
-+ PIN_FIELD_BASE(38, 38, 6, 0x0050, 0x10, 6, 1),
-+ PIN_FIELD_BASE(39, 39, 6, 0x0050, 0x10, 8, 1),
-+ PINS_FIELD_BASE(40, 90, 6, 0x0050, 0x10, 7, 1),
-+ PIN_FIELD_BASE(91, 91, 2, 0x0050, 0x10, 3, 1),
-+ PIN_FIELD_BASE(92, 92, 2, 0x0050, 0x10, 2, 1),
-+ PIN_FIELD_BASE(93, 93, 2, 0x0050, 0x10, 0, 1),
-+ PINS_FIELD_BASE(94, 121, 2, 0x0050, 0x10, 1, 1),
-+ PIN_FIELD_BASE(122, 122, 4, 0x0030, 0x10, 1, 1),
-+ PIN_FIELD_BASE(123, 123, 4, 0x0030, 0x10, 2, 1),
-+ PIN_FIELD_BASE(124, 124, 4, 0x0030, 0x10, 0, 1),
-+ PIN_FIELD_BASE(125, 125, 4, 0x0030, 0x10, 4, 1),
-+ PIN_FIELD_BASE(126, 126, 4, 0x0030, 0x10, 6, 1),
-+ PIN_FIELD_BASE(127, 127, 4, 0x0030, 0x10, 8, 1),
-+ PIN_FIELD_BASE(128, 128, 4, 0x0030, 0x10, 3, 1),
-+ PIN_FIELD_BASE(129, 129, 4, 0x0030, 0x10, 7, 1),
-+ PIN_FIELD_BASE(130, 130, 4, 0x0030, 0x10, 9, 1),
-+ PIN_FIELD_BASE(131, 131, 4, 0x0030, 0x10, 10, 1),
-+ PIN_FIELD_BASE(132, 132, 4, 0x0030, 0x10, 5, 1),
-+ PINS_FIELD_BASE(133, 179, 4, 0x0030, 0x10, 11, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt6765_pin_r0_range[] = {
-+ PINS_FIELD_BASE(0, 28, 4, 0x0030, 0x10, 11, 1),
-+ PIN_FIELD_BASE(29, 29, 6, 0x0070, 0x10, 0, 1),
-+ PIN_FIELD_BASE(30, 30, 6, 0x0070, 0x10, 1, 1),
-+ PIN_FIELD_BASE(31, 31, 6, 0x0070, 0x10, 5, 1),
-+ PIN_FIELD_BASE(32, 32, 6, 0x0070, 0x10, 2, 1),
-+ PIN_FIELD_BASE(33, 33, 6, 0x0070, 0x10, 4, 1),
-+ PIN_FIELD_BASE(34, 34, 6, 0x0070, 0x10, 3, 1),
-+ PIN_FIELD_BASE(35, 35, 6, 0x0070, 0x10, 10, 1),
-+ PIN_FIELD_BASE(36, 36, 6, 0x0070, 0x10, 11, 1),
-+ PIN_FIELD_BASE(37, 37, 6, 0x0070, 0x10, 9, 1),
-+ PIN_FIELD_BASE(38, 38, 6, 0x0070, 0x10, 6, 1),
-+ PIN_FIELD_BASE(39, 39, 6, 0x0070, 0x10, 8, 1),
-+ PINS_FIELD_BASE(40, 90, 6, 0x0070, 0x10, 7, 1),
-+ PIN_FIELD_BASE(91, 91, 2, 0x0070, 0x10, 3, 1),
-+ PIN_FIELD_BASE(92, 92, 2, 0x0070, 0x10, 2, 1),
-+ PIN_FIELD_BASE(93, 93, 2, 0x0070, 0x10, 0, 1),
-+ PINS_FIELD_BASE(94, 121, 2, 0x0070, 0x10, 1, 1),
-+ PIN_FIELD_BASE(122, 122, 4, 0x0050, 0x10, 1, 1),
-+ PIN_FIELD_BASE(123, 123, 4, 0x0050, 0x10, 2, 1),
-+ PIN_FIELD_BASE(124, 124, 4, 0x0050, 0x10, 0, 1),
-+ PIN_FIELD_BASE(125, 125, 4, 0x0050, 0x10, 4, 1),
-+ PIN_FIELD_BASE(126, 126, 4, 0x0050, 0x10, 6, 1),
-+ PIN_FIELD_BASE(127, 127, 4, 0x0050, 0x10, 8, 1),
-+ PIN_FIELD_BASE(128, 128, 4, 0x0050, 0x10, 3, 1),
-+ PIN_FIELD_BASE(129, 129, 4, 0x0050, 0x10, 7, 1),
-+ PIN_FIELD_BASE(130, 130, 4, 0x0050, 0x10, 9, 1),
-+ PIN_FIELD_BASE(131, 131, 4, 0x0050, 0x10, 10, 1),
-+ PIN_FIELD_BASE(132, 132, 4, 0x0050, 0x10, 5, 1),
-+ PINS_FIELD_BASE(133, 179, 4, 0x0050, 0x10, 11, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt6765_pin_r1_range[] = {
-+ PINS_FIELD_BASE(0, 28, 4, 0x0050, 0x10, 11, 1),
-+ PIN_FIELD_BASE(29, 29, 6, 0x0080, 0x10, 0, 1),
-+ PIN_FIELD_BASE(30, 30, 6, 0x0080, 0x10, 1, 1),
-+ PIN_FIELD_BASE(31, 31, 6, 0x0080, 0x10, 5, 1),
-+ PIN_FIELD_BASE(32, 32, 6, 0x0080, 0x10, 2, 1),
-+ PIN_FIELD_BASE(33, 33, 6, 0x0080, 0x10, 4, 1),
-+ PIN_FIELD_BASE(34, 34, 6, 0x0080, 0x10, 3, 1),
-+ PIN_FIELD_BASE(35, 35, 6, 0x0080, 0x10, 10, 1),
-+ PIN_FIELD_BASE(36, 36, 6, 0x0080, 0x10, 11, 1),
-+ PIN_FIELD_BASE(37, 37, 6, 0x0080, 0x10, 9, 1),
-+ PIN_FIELD_BASE(38, 38, 6, 0x0080, 0x10, 6, 1),
-+ PIN_FIELD_BASE(39, 39, 6, 0x0080, 0x10, 8, 1),
-+ PINS_FIELD_BASE(40, 90, 6, 0x0080, 0x10, 7, 1),
-+ PIN_FIELD_BASE(91, 91, 2, 0x0080, 0x10, 3, 1),
-+ PIN_FIELD_BASE(92, 92, 2, 0x0080, 0x10, 2, 1),
-+ PIN_FIELD_BASE(93, 93, 2, 0x0080, 0x10, 0, 1),
-+ PINS_FIELD_BASE(94, 121, 2, 0x0080, 0x10, 1, 1),
-+ PIN_FIELD_BASE(122, 122, 4, 0x0060, 0x10, 1, 1),
-+ PIN_FIELD_BASE(123, 123, 4, 0x0060, 0x10, 2, 1),
-+ PIN_FIELD_BASE(124, 124, 4, 0x0060, 0x10, 0, 1),
-+ PIN_FIELD_BASE(125, 125, 4, 0x0060, 0x10, 4, 1),
-+ PIN_FIELD_BASE(126, 126, 4, 0x0060, 0x10, 6, 1),
-+ PIN_FIELD_BASE(127, 127, 4, 0x0060, 0x10, 8, 1),
-+ PIN_FIELD_BASE(128, 128, 4, 0x0060, 0x10, 3, 1),
-+ PIN_FIELD_BASE(129, 129, 4, 0x0060, 0x10, 7, 1),
-+ PIN_FIELD_BASE(130, 130, 4, 0x0060, 0x10, 9, 1),
-+ PIN_FIELD_BASE(131, 131, 4, 0x0060, 0x10, 10, 1),
-+ PIN_FIELD_BASE(132, 132, 4, 0x0060, 0x10, 5, 1),
-+ PINS_FIELD_BASE(133, 179, 4, 0x0060, 0x10, 11, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt6765_pin_ies_range[] = {
-+ PIN_FIELD_BASE(0, 0, 2, 0x0030, 0x10, 6, 1),
-+ PIN_FIELD_BASE(1, 1, 2, 0x0030, 0x10, 7, 1),
-+ PIN_FIELD_BASE(2, 2, 2, 0x0030, 0x10, 10, 1),
-+ PIN_FIELD_BASE(3, 3, 2, 0x0030, 0x10, 11, 1),
-+ PIN_FIELD_BASE(4, 4, 2, 0x0030, 0x10, 12, 1),
-+ PIN_FIELD_BASE(5, 5, 2, 0x0030, 0x10, 13, 1),
-+ PIN_FIELD_BASE(6, 6, 2, 0x0030, 0x10, 14, 1),
-+ PIN_FIELD_BASE(7, 7, 2, 0x0030, 0x10, 15, 1),
-+ PIN_FIELD_BASE(8, 8, 3, 0x0030, 0x10, 12, 1),
-+ PIN_FIELD_BASE(9, 9, 2, 0x0030, 0x10, 16, 1),
-+ PIN_FIELD_BASE(10, 10, 2, 0x0030, 0x10, 8, 1),
-+ PIN_FIELD_BASE(11, 11, 2, 0x0030, 0x10, 9, 1),
-+ PIN_FIELD_BASE(12, 12, 5, 0x0020, 0x10, 9, 1),
-+ PIN_FIELD_BASE(13, 13, 6, 0x0020, 0x10, 26, 1),
-+ PIN_FIELD_BASE(14, 14, 6, 0x0020, 0x10, 25, 1),
-+ PIN_FIELD_BASE(15, 15, 6, 0x0020, 0x10, 27, 1),
-+ PIN_FIELD_BASE(16, 16, 6, 0x0020, 0x10, 24, 1),
-+ PIN_FIELD_BASE(17, 17, 6, 0x0020, 0x10, 19, 1),
-+ PIN_FIELD_BASE(18, 18, 6, 0x0020, 0x10, 16, 1),
-+ PIN_FIELD_BASE(19, 19, 6, 0x0020, 0x10, 18, 1),
-+ PIN_FIELD_BASE(20, 20, 6, 0x0020, 0x10, 17, 1),
-+ PIN_FIELD_BASE(21, 21, 6, 0x0020, 0x10, 22, 1),
-+ PIN_FIELD_BASE(22, 22, 6, 0x0020, 0x10, 21, 1),
-+ PIN_FIELD_BASE(23, 23, 6, 0x0020, 0x10, 23, 1),
-+ PIN_FIELD_BASE(24, 24, 6, 0x0020, 0x10, 20, 1),
-+ PIN_FIELD_BASE(25, 25, 6, 0x0020, 0x10, 14, 1),
-+ PIN_FIELD_BASE(26, 26, 6, 0x0020, 0x10, 13, 1),
-+ PIN_FIELD_BASE(27, 27, 6, 0x0020, 0x10, 15, 1),
-+ PIN_FIELD_BASE(28, 28, 6, 0x0020, 0x10, 12, 1),
-+ PIN_FIELD_BASE(29, 29, 6, 0x0020, 0x10, 0, 1),
-+ PIN_FIELD_BASE(30, 30, 6, 0x0020, 0x10, 1, 1),
-+ PIN_FIELD_BASE(31, 31, 6, 0x0020, 0x10, 5, 1),
-+ PIN_FIELD_BASE(32, 32, 6, 0x0020, 0x10, 2, 1),
-+ PIN_FIELD_BASE(33, 33, 6, 0x0020, 0x10, 4, 1),
-+ PIN_FIELD_BASE(34, 34, 6, 0x0020, 0x10, 3, 1),
-+ PIN_FIELD_BASE(35, 35, 6, 0x0020, 0x10, 10, 1),
-+ PIN_FIELD_BASE(36, 36, 6, 0x0020, 0x10, 11, 1),
-+ PIN_FIELD_BASE(37, 37, 6, 0x0020, 0x10, 9, 1),
-+ PIN_FIELD_BASE(38, 38, 6, 0x0020, 0x10, 6, 1),
-+ PIN_FIELD_BASE(39, 39, 6, 0x0020, 0x10, 8, 1),
-+ PIN_FIELD_BASE(40, 40, 6, 0x0020, 0x10, 7, 1),
-+ PIN_FIELD_BASE(41, 41, 7, 0x0040, 0x10, 19, 1),
-+ PIN_FIELD_BASE(42, 42, 7, 0x0040, 0x10, 9, 1),
-+ PIN_FIELD_BASE(43, 43, 7, 0x0040, 0x10, 8, 1),
-+ PIN_FIELD_BASE(44, 44, 7, 0x0040, 0x10, 10, 1),
-+ PIN_FIELD_BASE(45, 45, 7, 0x0040, 0x10, 22, 1),
-+ PIN_FIELD_BASE(46, 46, 7, 0x0040, 0x10, 21, 1),
-+ PIN_FIELD_BASE(47, 47, 7, 0x0040, 0x10, 20, 1),
-+ PIN_FIELD_BASE(48, 48, 7, 0x0050, 0x10, 3, 1),
-+ PIN_FIELD_BASE(49, 49, 7, 0x0050, 0x10, 5, 1),
-+ PIN_FIELD_BASE(50, 50, 7, 0x0050, 0x10, 2, 1),
-+ PIN_FIELD_BASE(51, 51, 7, 0x0050, 0x10, 4, 1),
-+ PIN_FIELD_BASE(52, 52, 7, 0x0040, 0x10, 1, 1),
-+ PIN_FIELD_BASE(53, 53, 7, 0x0040, 0x10, 0, 1),
-+ PIN_FIELD_BASE(54, 54, 7, 0x0040, 0x10, 5, 1),
-+ PIN_FIELD_BASE(55, 55, 7, 0x0040, 0x10, 3, 1),
-+ PIN_FIELD_BASE(56, 56, 7, 0x0040, 0x10, 4, 1),
-+ PIN_FIELD_BASE(57, 57, 7, 0x0040, 0x10, 2, 1),
-+ PIN_FIELD_BASE(58, 58, 7, 0x0050, 0x10, 0, 1),
-+ PIN_FIELD_BASE(59, 59, 7, 0x0040, 0x10, 31, 1),
-+ PIN_FIELD_BASE(60, 60, 7, 0x0040, 0x10, 30, 1),
-+ PIN_FIELD_BASE(61, 61, 3, 0x0030, 0x10, 18, 1),
-+ PIN_FIELD_BASE(62, 62, 3, 0x0030, 0x10, 14, 1),
-+ PIN_FIELD_BASE(63, 63, 3, 0x0030, 0x10, 17, 1),
-+ PIN_FIELD_BASE(64, 64, 3, 0x0030, 0x10, 13, 1),
-+ PIN_FIELD_BASE(65, 65, 3, 0x0030, 0x10, 20, 1),
-+ PIN_FIELD_BASE(66, 66, 3, 0x0030, 0x10, 16, 1),
-+ PIN_FIELD_BASE(67, 67, 3, 0x0030, 0x10, 19, 1),
-+ PIN_FIELD_BASE(68, 68, 3, 0x0030, 0x10, 15, 1),
-+ PIN_FIELD_BASE(69, 69, 3, 0x0030, 0x10, 8, 1),
-+ PIN_FIELD_BASE(70, 70, 3, 0x0030, 0x10, 7, 1),
-+ PIN_FIELD_BASE(71, 71, 3, 0x0030, 0x10, 6, 1),
-+ PIN_FIELD_BASE(72, 72, 3, 0x0030, 0x10, 5, 1),
-+ PIN_FIELD_BASE(73, 73, 3, 0x0030, 0x10, 4, 1),
-+ PIN_FIELD_BASE(74, 74, 3, 0x0030, 0x10, 3, 1),
-+ PIN_FIELD_BASE(75, 75, 3, 0x0030, 0x10, 2, 1),
-+ PIN_FIELD_BASE(76, 76, 3, 0x0030, 0x10, 1, 1),
-+ PIN_FIELD_BASE(77, 77, 3, 0x0030, 0x10, 0, 1),
-+ PIN_FIELD_BASE(78, 78, 3, 0x0030, 0x10, 9, 1),
-+ PIN_FIELD_BASE(79, 79, 3, 0x0030, 0x10, 11, 1),
-+ PIN_FIELD_BASE(80, 80, 3, 0x0030, 0x10, 10, 1),
-+ PIN_FIELD_BASE(81, 81, 3, 0x0030, 0x10, 25, 1),
-+ PIN_FIELD_BASE(82, 82, 3, 0x0030, 0x10, 24, 1),
-+ PIN_FIELD_BASE(83, 83, 3, 0x0030, 0x10, 22, 1),
-+ PIN_FIELD_BASE(84, 84, 3, 0x0030, 0x10, 23, 1),
-+ PIN_FIELD_BASE(85, 85, 7, 0x0050, 0x10, 1, 1),
-+ PIN_FIELD_BASE(86, 86, 7, 0x0040, 0x10, 29, 1),
-+ PIN_FIELD_BASE(87, 87, 7, 0x0040, 0x10, 7, 1),
-+ PIN_FIELD_BASE(88, 88, 7, 0x0040, 0x10, 6, 1),
-+ PIN_FIELD_BASE(89, 89, 2, 0x0030, 0x10, 25, 1),
-+ PIN_FIELD_BASE(90, 90, 3, 0x0030, 0x10, 21, 1),
-+ PIN_FIELD_BASE(91, 91, 2, 0x0030, 0x10, 20, 1),
-+ PIN_FIELD_BASE(92, 92, 2, 0x0030, 0x10, 19, 1),
-+ PIN_FIELD_BASE(93, 93, 2, 0x0030, 0x10, 17, 1),
-+ PIN_FIELD_BASE(94, 94, 2, 0x0030, 0x10, 18, 1),
-+ PIN_FIELD_BASE(95, 95, 2, 0x0030, 0x10, 26, 1),
-+ PIN_FIELD_BASE(96, 96, 2, 0x0030, 0x10, 27, 1),
-+ PIN_FIELD_BASE(97, 97, 2, 0x0030, 0x10, 2, 1),
-+ PIN_FIELD_BASE(98, 98, 2, 0x0030, 0x10, 3, 1),
-+ PIN_FIELD_BASE(99, 99, 2, 0x0030, 0x10, 0, 1),
-+ PIN_FIELD_BASE(100, 100, 2, 0x0030, 0x10, 1, 1),
-+ PIN_FIELD_BASE(101, 101, 2, 0x0030, 0x10, 4, 1),
-+ PIN_FIELD_BASE(102, 102, 2, 0x0030, 0x10, 5, 1),
-+ PIN_FIELD_BASE(103, 103, 2, 0x0030, 0x10, 21, 1),
-+ PIN_FIELD_BASE(104, 104, 2, 0x0030, 0x10, 23, 1),
-+ PIN_FIELD_BASE(105, 105, 2, 0x0030, 0x10, 22, 1),
-+ PIN_FIELD_BASE(106, 106, 2, 0x0030, 0x10, 24, 1),
-+ PIN_FIELD_BASE(107, 107, 1, 0x0030, 0x10, 4, 1),
-+ PIN_FIELD_BASE(108, 108, 1, 0x0030, 0x10, 3, 1),
-+ PIN_FIELD_BASE(109, 109, 1, 0x0030, 0x10, 5, 1),
-+ PIN_FIELD_BASE(110, 110, 1, 0x0030, 0x10, 0, 1),
-+ PIN_FIELD_BASE(111, 111, 1, 0x0030, 0x10, 1, 1),
-+ PIN_FIELD_BASE(112, 112, 1, 0x0030, 0x10, 2, 1),
-+ PIN_FIELD_BASE(113, 113, 1, 0x0030, 0x10, 9, 1),
-+ PIN_FIELD_BASE(114, 114, 1, 0x0030, 0x10, 10, 1),
-+ PIN_FIELD_BASE(115, 115, 1, 0x0030, 0x10, 6, 1),
-+ PIN_FIELD_BASE(116, 116, 1, 0x0030, 0x10, 7, 1),
-+ PIN_FIELD_BASE(117, 117, 1, 0x0030, 0x10, 12, 1),
-+ PIN_FIELD_BASE(118, 118, 1, 0x0030, 0x10, 13, 1),
-+ PIN_FIELD_BASE(119, 119, 1, 0x0030, 0x10, 14, 1),
-+ PIN_FIELD_BASE(120, 120, 1, 0x0030, 0x10, 11, 1),
-+ PIN_FIELD_BASE(121, 121, 1, 0x0030, 0x10, 8, 1),
-+ PIN_FIELD_BASE(122, 122, 4, 0x0010, 0x10, 9, 1),
-+ PIN_FIELD_BASE(123, 123, 4, 0x0010, 0x10, 10, 1),
-+ PIN_FIELD_BASE(124, 124, 4, 0x0010, 0x10, 8, 1),
-+ PIN_FIELD_BASE(125, 125, 4, 0x0010, 0x10, 12, 1),
-+ PIN_FIELD_BASE(126, 126, 4, 0x0010, 0x10, 14, 1),
-+ PIN_FIELD_BASE(127, 127, 4, 0x0010, 0x10, 16, 1),
-+ PIN_FIELD_BASE(128, 128, 4, 0x0010, 0x10, 11, 1),
-+ PIN_FIELD_BASE(129, 129, 4, 0x0010, 0x10, 15, 1),
-+ PIN_FIELD_BASE(130, 130, 4, 0x0010, 0x10, 17, 1),
-+ PIN_FIELD_BASE(131, 131, 4, 0x0010, 0x10, 18, 1),
-+ PIN_FIELD_BASE(132, 132, 4, 0x0010, 0x10, 13, 1),
-+ PIN_FIELD_BASE(133, 133, 4, 0x0010, 0x10, 19, 1),
-+ PIN_FIELD_BASE(134, 134, 5, 0x0020, 0x10, 14, 1),
-+ PIN_FIELD_BASE(135, 135, 5, 0x0020, 0x10, 17, 1),
-+ PIN_FIELD_BASE(136, 136, 5, 0x0020, 0x10, 1, 1),
-+ PIN_FIELD_BASE(137, 137, 5, 0x0020, 0x10, 7, 1),
-+ PIN_FIELD_BASE(138, 138, 5, 0x0020, 0x10, 4, 1),
-+ PIN_FIELD_BASE(139, 139, 5, 0x0020, 0x10, 5, 1),
-+ PIN_FIELD_BASE(140, 140, 5, 0x0020, 0x10, 0, 1),
-+ PIN_FIELD_BASE(141, 141, 5, 0x0020, 0x10, 6, 1),
-+ PIN_FIELD_BASE(142, 142, 5, 0x0020, 0x10, 2, 1),
-+ PIN_FIELD_BASE(143, 143, 5, 0x0020, 0x10, 3, 1),
-+ PIN_FIELD_BASE(144, 144, 5, 0x0020, 0x10, 12, 1),
-+ PIN_FIELD_BASE(145, 145, 5, 0x0020, 0x10, 11, 1),
-+ PIN_FIELD_BASE(146, 146, 5, 0x0020, 0x10, 13, 1),
-+ PIN_FIELD_BASE(147, 147, 5, 0x0020, 0x10, 10, 1),
-+ PIN_FIELD_BASE(148, 148, 5, 0x0020, 0x10, 15, 1),
-+ PIN_FIELD_BASE(149, 149, 5, 0x0020, 0x10, 16, 1),
-+ PIN_FIELD_BASE(150, 150, 7, 0x0040, 0x10, 23, 1),
-+ PIN_FIELD_BASE(151, 151, 7, 0x0040, 0x10, 24, 1),
-+ PIN_FIELD_BASE(152, 152, 7, 0x0040, 0x10, 25, 1),
-+ PIN_FIELD_BASE(153, 153, 7, 0x0040, 0x10, 26, 1),
-+ PIN_FIELD_BASE(154, 154, 7, 0x0040, 0x10, 28, 1),
-+ PIN_FIELD_BASE(155, 155, 3, 0x0030, 0x10, 28, 1),
-+ PIN_FIELD_BASE(156, 156, 3, 0x0030, 0x10, 27, 1),
-+ PIN_FIELD_BASE(157, 157, 3, 0x0030, 0x10, 29, 1),
-+ PIN_FIELD_BASE(158, 158, 3, 0x0030, 0x10, 26, 1),
-+ PIN_FIELD_BASE(159, 159, 7, 0x0040, 0x10, 27, 1),
-+ PIN_FIELD_BASE(160, 160, 5, 0x0020, 0x10, 8, 1),
-+ PIN_FIELD_BASE(161, 161, 1, 0x0030, 0x10, 15, 1),
-+ PIN_FIELD_BASE(162, 162, 1, 0x0030, 0x10, 16, 1),
-+ PIN_FIELD_BASE(163, 163, 4, 0x0010, 0x10, 0, 1),
-+ PIN_FIELD_BASE(164, 164, 4, 0x0010, 0x10, 1, 1),
-+ PIN_FIELD_BASE(165, 165, 4, 0x0010, 0x10, 2, 1),
-+ PIN_FIELD_BASE(166, 166, 4, 0x0010, 0x10, 3, 1),
-+ PIN_FIELD_BASE(167, 167, 4, 0x0010, 0x10, 4, 1),
-+ PIN_FIELD_BASE(168, 168, 4, 0x0010, 0x10, 5, 1),
-+ PIN_FIELD_BASE(169, 169, 4, 0x0010, 0x10, 6, 1),
-+ PIN_FIELD_BASE(170, 170, 4, 0x0010, 0x10, 7, 1),
-+ PIN_FIELD_BASE(171, 171, 7, 0x0040, 0x10, 17, 1),
-+ PIN_FIELD_BASE(172, 172, 7, 0x0040, 0x10, 18, 1),
-+ PIN_FIELD_BASE(173, 173, 7, 0x0040, 0x10, 11, 1),
-+ PIN_FIELD_BASE(174, 174, 7, 0x0040, 0x10, 12, 1),
-+ PIN_FIELD_BASE(175, 175, 7, 0x0040, 0x10, 13, 1),
-+ PIN_FIELD_BASE(176, 176, 7, 0x0040, 0x10, 14, 1),
-+ PIN_FIELD_BASE(177, 177, 7, 0x0040, 0x10, 15, 1),
-+ PINS_FIELD_BASE(178, 179, 7, 0x0040, 0x10, 16, 1),
-+};
-+
-+static const struct mtk_pin_reg_calc mt6765_reg_cals[PINCTRL_PIN_REG_MAX] = {
-+ [PINCTRL_PIN_REG_MODE] = MTK_RANGE(mt6765_pin_mode_range),
-+ [PINCTRL_PIN_REG_DIR] = MTK_RANGE(mt6765_pin_dir_range),
-+ [PINCTRL_PIN_REG_DI] = MTK_RANGE(mt6765_pin_di_range),
-+ [PINCTRL_PIN_REG_DO] = MTK_RANGE(mt6765_pin_do_range),
-+ [PINCTRL_PIN_REG_SMT] = MTK_RANGE(mt6765_pin_smt_range),
-+ [PINCTRL_PIN_REG_PD] = MTK_RANGE(mt6765_pin_pd_range),
-+ [PINCTRL_PIN_REG_PU] = MTK_RANGE(mt6765_pin_pu_range),
-+ [PINCTRL_PIN_REG_TDSEL] = MTK_RANGE(mt6765_pin_tdsel_range),
-+ [PINCTRL_PIN_REG_RDSEL] = MTK_RANGE(mt6765_pin_rdsel_range),
-+ [PINCTRL_PIN_REG_DRV] = MTK_RANGE(mt6765_pin_drv_range),
-+ [PINCTRL_PIN_REG_PUPD] = MTK_RANGE(mt6765_pin_pupd_range),
-+ [PINCTRL_PIN_REG_R0] = MTK_RANGE(mt6765_pin_r0_range),
-+ [PINCTRL_PIN_REG_R1] = MTK_RANGE(mt6765_pin_r1_range),
-+ [PINCTRL_PIN_REG_IES] = MTK_RANGE(mt6765_pin_ies_range),
-+};
-+
-+static const char * const mt6765_pinctrl_register_base_names[] = {
-+ "iocfg0", "iocfg1", "iocfg2", "iocfg3", "iocfg4", "iocfg5",
-+ "iocfg6", "iocfg7",
-+};
-+
-+static const struct mtk_eint_hw mt6765_eint_hw = {
-+ .port_mask = 7,
-+ .ports = 6,
-+ .ap_num = 160,
-+ .db_cnt = 13,
-+};
-+
-+static const struct mtk_pin_soc mt6765_data = {
-+ .reg_cal = mt6765_reg_cals,
-+ .pins = mtk_pins_mt6765,
-+ .npins = ARRAY_SIZE(mtk_pins_mt6765),
-+ .ngrps = ARRAY_SIZE(mtk_pins_mt6765),
-+ .eint_hw = &mt6765_eint_hw,
-+ .gpio_m = 0,
-+ .ies_present = true,
-+ .base_names = mt6765_pinctrl_register_base_names,
-+ .nbase_names = ARRAY_SIZE(mt6765_pinctrl_register_base_names),
-+ .bias_disable_set = mtk_pinconf_bias_disable_set,
-+ .bias_disable_get = mtk_pinconf_bias_disable_get,
-+ .bias_set = mtk_pinconf_bias_set,
-+ .bias_get = mtk_pinconf_bias_get,
-+ .drive_set = mtk_pinconf_drive_set_rev1,
-+ .drive_get = mtk_pinconf_drive_get_rev1,
-+ .adv_pull_get = mtk_pinconf_adv_pull_get,
-+ .adv_pull_set = mtk_pinconf_adv_pull_set,
-+};
-+
-+static const struct of_device_id mt6765_pinctrl_of_match[] = {
-+ { .compatible = "mediatek,mt6765-pinctrl", },
-+ { }
-+};
-+
-+static int mt6765_pinctrl_probe(struct platform_device *pdev)
-+{
-+ return mtk_paris_pinctrl_probe(pdev, &mt6765_data);
-+}
-+
-+static struct platform_driver mt6765_pinctrl_driver = {
-+ .driver = {
-+ .name = "mt6765-pinctrl",
-+ .of_match_table = mt6765_pinctrl_of_match,
-+ },
-+ .probe = mt6765_pinctrl_probe,
-+};
-+
-+static int __init mt6765_pinctrl_init(void)
-+{
-+ return platform_driver_register(&mt6765_pinctrl_driver);
-+}
-+arch_initcall(mt6765_pinctrl_init);
---- /dev/null
-+++ b/drivers/pinctrl/mediatek/pinctrl-mt6797.c
-@@ -0,0 +1,82 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Based on pinctrl-mt6765.c
-+ *
-+ * Copyright (C) 2018 MediaTek Inc.
-+ *
-+ * Author: ZH Chen <zh.chen@mediatek.com>
-+ *
-+ * Copyright (C) Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
-+ *
-+ */
-+
-+#include "pinctrl-mtk-mt6797.h"
-+#include "pinctrl-paris.h"
-+
-+/*
-+ * MT6797 have multiple bases to program pin configuration listed as the below:
-+ * gpio:0x10005000, iocfg[l]:0x10002000, iocfg[b]:0x10002400,
-+ * iocfg[r]:0x10002800, iocfg[t]:0x10002C00.
-+ * _i_base could be used to indicate what base the pin should be mapped into.
-+ */
-+
-+static const struct mtk_pin_field_calc mt6797_pin_mode_range[] = {
-+ PIN_FIELD(0, 261, 0x300, 0x10, 0, 4),
-+};
-+
-+static const struct mtk_pin_field_calc mt6797_pin_dir_range[] = {
-+ PIN_FIELD(0, 261, 0x0, 0x10, 0, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt6797_pin_di_range[] = {
-+ PIN_FIELD(0, 261, 0x200, 0x10, 0, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt6797_pin_do_range[] = {
-+ PIN_FIELD(0, 261, 0x100, 0x10, 0, 1),
-+};
-+
-+static const struct mtk_pin_reg_calc mt6797_reg_cals[PINCTRL_PIN_REG_MAX] = {
-+ [PINCTRL_PIN_REG_MODE] = MTK_RANGE(mt6797_pin_mode_range),
-+ [PINCTRL_PIN_REG_DIR] = MTK_RANGE(mt6797_pin_dir_range),
-+ [PINCTRL_PIN_REG_DI] = MTK_RANGE(mt6797_pin_di_range),
-+ [PINCTRL_PIN_REG_DO] = MTK_RANGE(mt6797_pin_do_range),
-+};
-+
-+static const char * const mt6797_pinctrl_register_base_names[] = {
-+ "gpio", "iocfgl", "iocfgb", "iocfgr", "iocfgt",
-+};
-+
-+static const struct mtk_pin_soc mt6797_data = {
-+ .reg_cal = mt6797_reg_cals,
-+ .pins = mtk_pins_mt6797,
-+ .npins = ARRAY_SIZE(mtk_pins_mt6797),
-+ .ngrps = ARRAY_SIZE(mtk_pins_mt6797),
-+ .gpio_m = 0,
-+ .base_names = mt6797_pinctrl_register_base_names,
-+ .nbase_names = ARRAY_SIZE(mt6797_pinctrl_register_base_names),
-+};
-+
-+static const struct of_device_id mt6797_pinctrl_of_match[] = {
-+ { .compatible = "mediatek,mt6797-pinctrl", },
-+ { }
-+};
-+
-+static int mt6797_pinctrl_probe(struct platform_device *pdev)
-+{
-+ return mtk_paris_pinctrl_probe(pdev, &mt6797_data);
-+}
-+
-+static struct platform_driver mt6797_pinctrl_driver = {
-+ .driver = {
-+ .name = "mt6797-pinctrl",
-+ .of_match_table = mt6797_pinctrl_of_match,
-+ },
-+ .probe = mt6797_pinctrl_probe,
-+};
-+
-+static int __init mt6797_pinctrl_init(void)
-+{
-+ return platform_driver_register(&mt6797_pinctrl_driver);
-+}
-+arch_initcall(mt6797_pinctrl_init);
---- a/drivers/pinctrl/mediatek/pinctrl-mt7622.c
-+++ b/drivers/pinctrl/mediatek/pinctrl-mt7622.c
-@@ -1,297 +1,140 @@
-+// SPDX-License-Identifier: GPL-2.0
- /*
-- * MediaTek MT7622 Pinctrl Driver
-+ * Copyright (C) 2017-2018 MediaTek Inc.
- *
-- * Copyright (C) 2017 Sean Wang <sean.wang@mediatek.com>
-+ * Author: Sean Wang <sean.wang@mediatek.com>
- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- * GNU General Public License for more details.
-- */
--
--#include <linux/gpio.h>
--#include <linux/gpio/driver.h>
--#include <linux/io.h>
--#include <linux/init.h>
--#include <linux/mfd/syscon.h>
--#include <linux/of.h>
--#include <linux/of_irq.h>
--#include <linux/of_platform.h>
--#include <linux/platform_device.h>
--#include <linux/pinctrl/pinctrl.h>
--#include <linux/pinctrl/pinmux.h>
--#include <linux/pinctrl/pinconf.h>
--#include <linux/pinctrl/pinconf-generic.h>
--#include <linux/regmap.h>
--
--#include "../core.h"
--#include "../pinconf.h"
--#include "../pinmux.h"
--#include "mtk-eint.h"
--
--#define PINCTRL_PINCTRL_DEV KBUILD_MODNAME
--#define MTK_RANGE(_a) { .range = (_a), .nranges = ARRAY_SIZE(_a), }
--#define PINCTRL_PIN_GROUP(name, id) \
-- { \
-- name, \
-- id##_pins, \
-- ARRAY_SIZE(id##_pins), \
-- id##_funcs, \
-- }
--
--#define MTK_GPIO_MODE 1
--#define MTK_INPUT 0
--#define MTK_OUTPUT 1
--#define MTK_DISABLE 0
--#define MTK_ENABLE 1
--
--/* Custom pinconf parameters */
--#define MTK_PIN_CONFIG_TDSEL (PIN_CONFIG_END + 1)
--#define MTK_PIN_CONFIG_RDSEL (PIN_CONFIG_END + 2)
--
--/* List these attributes which could be modified for the pin */
--enum {
-- PINCTRL_PIN_REG_MODE,
-- PINCTRL_PIN_REG_DIR,
-- PINCTRL_PIN_REG_DI,
-- PINCTRL_PIN_REG_DO,
-- PINCTRL_PIN_REG_SR,
-- PINCTRL_PIN_REG_SMT,
-- PINCTRL_PIN_REG_PD,
-- PINCTRL_PIN_REG_PU,
-- PINCTRL_PIN_REG_E4,
-- PINCTRL_PIN_REG_E8,
-- PINCTRL_PIN_REG_TDSEL,
-- PINCTRL_PIN_REG_RDSEL,
-- PINCTRL_PIN_REG_MAX,
--};
--
--/* struct mtk_pin_field - the structure that holds the information of the field
-- * used to describe the attribute for the pin
-- * @offset: the register offset relative to the base address
-- * @mask: the mask used to filter out the field from the register
-- * @bitpos: the start bit relative to the register
-- * @next: the indication that the field would be extended to the
-- next register
-- */
--struct mtk_pin_field {
-- u32 offset;
-- u32 mask;
-- u8 bitpos;
-- u8 next;
--};
--
--/* struct mtk_pin_field_calc - the structure that holds the range providing
-- * the guide used to look up the relevant field
-- * @s_pin: the start pin within the range
-- * @e_pin: the end pin within the range
-- * @s_addr: the start address for the range
-- * @x_addrs: the address distance between two consecutive registers
-- * within the range
-- * @s_bit: the start bit for the first register within the range
-- * @x_bits: the bit distance between two consecutive pins within
-- * the range
-- */
--struct mtk_pin_field_calc {
-- u16 s_pin;
-- u16 e_pin;
-- u32 s_addr;
-- u8 x_addrs;
-- u8 s_bit;
-- u8 x_bits;
--};
--
--/* struct mtk_pin_reg_calc - the structure that holds all ranges used to
-- * determine which register the pin would make use of
-- * for certain pin attribute.
-- * @range: the start address for the range
-- * @nranges: the number of items in the range
- */
--struct mtk_pin_reg_calc {
-- const struct mtk_pin_field_calc *range;
-- unsigned int nranges;
--};
-
--/* struct mtk_pin_soc - the structure that holds SoC-specific data */
--struct mtk_pin_soc {
-- const struct mtk_pin_reg_calc *reg_cal;
-- const struct pinctrl_pin_desc *pins;
-- unsigned int npins;
-- const struct group_desc *grps;
-- unsigned int ngrps;
-- const struct function_desc *funcs;
-- unsigned int nfuncs;
-- const struct mtk_eint_regs *eint_regs;
-- const struct mtk_eint_hw *eint_hw;
--};
-+#include "pinctrl-moore.h"
-
--struct mtk_pinctrl {
-- struct pinctrl_dev *pctrl;
-- void __iomem *base;
-- struct device *dev;
-- struct gpio_chip chip;
-- const struct mtk_pin_soc *soc;
-- struct mtk_eint *eint;
--};
-+#define MT7622_PIN(_number, _name) \
-+ MTK_PIN(_number, _name, 1, _number, DRV_GRP0)
-
- static const struct mtk_pin_field_calc mt7622_pin_mode_range[] = {
-- {0, 0, 0x320, 0x10, 16, 4},
-- {1, 4, 0x3a0, 0x10, 16, 4},
-- {5, 5, 0x320, 0x10, 0, 4},
-- {6, 6, 0x300, 0x10, 4, 4},
-- {7, 7, 0x300, 0x10, 4, 4},
-- {8, 9, 0x350, 0x10, 20, 4},
-- {10, 10, 0x300, 0x10, 8, 4},
-- {11, 11, 0x300, 0x10, 8, 4},
-- {12, 12, 0x300, 0x10, 8, 4},
-- {13, 13, 0x300, 0x10, 8, 4},
-- {14, 15, 0x320, 0x10, 4, 4},
-- {16, 17, 0x320, 0x10, 20, 4},
-- {18, 21, 0x310, 0x10, 16, 4},
-- {22, 22, 0x380, 0x10, 16, 4},
-- {23, 23, 0x300, 0x10, 24, 4},
-- {24, 24, 0x300, 0x10, 24, 4},
-- {25, 25, 0x300, 0x10, 12, 4},
-- {25, 25, 0x300, 0x10, 12, 4},
-- {26, 26, 0x300, 0x10, 12, 4},
-- {27, 27, 0x300, 0x10, 12, 4},
-- {28, 28, 0x300, 0x10, 12, 4},
-- {29, 29, 0x300, 0x10, 12, 4},
-- {30, 30, 0x300, 0x10, 12, 4},
-- {31, 31, 0x300, 0x10, 12, 4},
-- {32, 32, 0x300, 0x10, 12, 4},
-- {33, 33, 0x300, 0x10, 12, 4},
-- {34, 34, 0x300, 0x10, 12, 4},
-- {35, 35, 0x300, 0x10, 12, 4},
-- {36, 36, 0x300, 0x10, 12, 4},
-- {37, 37, 0x300, 0x10, 20, 4},
-- {38, 38, 0x300, 0x10, 20, 4},
-- {39, 39, 0x300, 0x10, 20, 4},
-- {40, 40, 0x300, 0x10, 20, 4},
-- {41, 41, 0x300, 0x10, 20, 4},
-- {42, 42, 0x300, 0x10, 20, 4},
-- {43, 43, 0x300, 0x10, 20, 4},
-- {44, 44, 0x300, 0x10, 20, 4},
-- {45, 46, 0x300, 0x10, 20, 4},
-- {47, 47, 0x300, 0x10, 20, 4},
-- {48, 48, 0x300, 0x10, 20, 4},
-- {49, 49, 0x300, 0x10, 20, 4},
-- {50, 50, 0x300, 0x10, 20, 4},
-- {51, 70, 0x330, 0x10, 4, 4},
-- {71, 71, 0x300, 0x10, 16, 4},
-- {72, 72, 0x300, 0x10, 16, 4},
-- {73, 76, 0x310, 0x10, 0, 4},
-- {77, 77, 0x320, 0x10, 28, 4},
-- {78, 78, 0x320, 0x10, 12, 4},
-- {79, 82, 0x3a0, 0x10, 0, 4},
-- {83, 83, 0x350, 0x10, 28, 4},
-- {84, 84, 0x330, 0x10, 0, 4},
-- {85, 90, 0x360, 0x10, 4, 4},
-- {91, 94, 0x390, 0x10, 16, 4},
-- {95, 97, 0x380, 0x10, 20, 4},
-- {98, 101, 0x390, 0x10, 0, 4},
-- {102, 102, 0x360, 0x10, 0, 4},
-+ PIN_FIELD(0, 0, 0x320, 0x10, 16, 4),
-+ PIN_FIELD(1, 4, 0x3a0, 0x10, 16, 4),
-+ PIN_FIELD(5, 5, 0x320, 0x10, 0, 4),
-+ PINS_FIELD(6, 7, 0x300, 0x10, 4, 4),
-+ PIN_FIELD(8, 9, 0x350, 0x10, 20, 4),
-+ PINS_FIELD(10, 13, 0x300, 0x10, 8, 4),
-+ PIN_FIELD(14, 15, 0x320, 0x10, 4, 4),
-+ PIN_FIELD(16, 17, 0x320, 0x10, 20, 4),
-+ PIN_FIELD(18, 21, 0x310, 0x10, 16, 4),
-+ PIN_FIELD(22, 22, 0x380, 0x10, 16, 4),
-+ PINS_FIELD(23, 24, 0x300, 0x10, 24, 4),
-+ PINS_FIELD(25, 36, 0x300, 0x10, 12, 4),
-+ PINS_FIELD(37, 50, 0x300, 0x10, 20, 4),
-+ PIN_FIELD(51, 70, 0x330, 0x10, 4, 4),
-+ PINS_FIELD(71, 72, 0x300, 0x10, 16, 4),
-+ PIN_FIELD(73, 76, 0x310, 0x10, 0, 4),
-+ PIN_FIELD(77, 77, 0x320, 0x10, 28, 4),
-+ PIN_FIELD(78, 78, 0x320, 0x10, 12, 4),
-+ PIN_FIELD(79, 82, 0x3a0, 0x10, 0, 4),
-+ PIN_FIELD(83, 83, 0x350, 0x10, 28, 4),
-+ PIN_FIELD(84, 84, 0x330, 0x10, 0, 4),
-+ PIN_FIELD(85, 90, 0x360, 0x10, 4, 4),
-+ PIN_FIELD(91, 94, 0x390, 0x10, 16, 4),
-+ PIN_FIELD(95, 97, 0x380, 0x10, 20, 4),
-+ PIN_FIELD(98, 101, 0x390, 0x10, 0, 4),
-+ PIN_FIELD(102, 102, 0x360, 0x10, 0, 4),
- };
-
- static const struct mtk_pin_field_calc mt7622_pin_dir_range[] = {
-- {0, 102, 0x0, 0x10, 0, 1},
-+ PIN_FIELD(0, 102, 0x0, 0x10, 0, 1),
- };
-
- static const struct mtk_pin_field_calc mt7622_pin_di_range[] = {
-- {0, 102, 0x200, 0x10, 0, 1},
-+ PIN_FIELD(0, 102, 0x200, 0x10, 0, 1),
- };
-
- static const struct mtk_pin_field_calc mt7622_pin_do_range[] = {
-- {0, 102, 0x100, 0x10, 0, 1},
-+ PIN_FIELD(0, 102, 0x100, 0x10, 0, 1),
- };
-
- static const struct mtk_pin_field_calc mt7622_pin_sr_range[] = {
-- {0, 31, 0x910, 0x10, 0, 1},
-- {32, 50, 0xa10, 0x10, 0, 1},
-- {51, 70, 0x810, 0x10, 0, 1},
-- {71, 72, 0xb10, 0x10, 0, 1},
-- {73, 86, 0xb10, 0x10, 4, 1},
-- {87, 90, 0xc10, 0x10, 0, 1},
-- {91, 102, 0xb10, 0x10, 18, 1},
-+ PIN_FIELD(0, 31, 0x910, 0x10, 0, 1),
-+ PIN_FIELD(32, 50, 0xa10, 0x10, 0, 1),
-+ PIN_FIELD(51, 70, 0x810, 0x10, 0, 1),
-+ PIN_FIELD(71, 72, 0xb10, 0x10, 0, 1),
-+ PIN_FIELD(73, 86, 0xb10, 0x10, 4, 1),
-+ PIN_FIELD(87, 90, 0xc10, 0x10, 0, 1),
-+ PIN_FIELD(91, 102, 0xb10, 0x10, 18, 1),
- };
-
- static const struct mtk_pin_field_calc mt7622_pin_smt_range[] = {
-- {0, 31, 0x920, 0x10, 0, 1},
-- {32, 50, 0xa20, 0x10, 0, 1},
-- {51, 70, 0x820, 0x10, 0, 1},
-- {71, 72, 0xb20, 0x10, 0, 1},
-- {73, 86, 0xb20, 0x10, 4, 1},
-- {87, 90, 0xc20, 0x10, 0, 1},
-- {91, 102, 0xb20, 0x10, 18, 1},
-+ PIN_FIELD(0, 31, 0x920, 0x10, 0, 1),
-+ PIN_FIELD(32, 50, 0xa20, 0x10, 0, 1),
-+ PIN_FIELD(51, 70, 0x820, 0x10, 0, 1),
-+ PIN_FIELD(71, 72, 0xb20, 0x10, 0, 1),
-+ PIN_FIELD(73, 86, 0xb20, 0x10, 4, 1),
-+ PIN_FIELD(87, 90, 0xc20, 0x10, 0, 1),
-+ PIN_FIELD(91, 102, 0xb20, 0x10, 18, 1),
- };
-
- static const struct mtk_pin_field_calc mt7622_pin_pu_range[] = {
-- {0, 31, 0x930, 0x10, 0, 1},
-- {32, 50, 0xa30, 0x10, 0, 1},
-- {51, 70, 0x830, 0x10, 0, 1},
-- {71, 72, 0xb30, 0x10, 0, 1},
-- {73, 86, 0xb30, 0x10, 4, 1},
-- {87, 90, 0xc30, 0x10, 0, 1},
-- {91, 102, 0xb30, 0x10, 18, 1},
-+ PIN_FIELD(0, 31, 0x930, 0x10, 0, 1),
-+ PIN_FIELD(32, 50, 0xa30, 0x10, 0, 1),
-+ PIN_FIELD(51, 70, 0x830, 0x10, 0, 1),
-+ PIN_FIELD(71, 72, 0xb30, 0x10, 0, 1),
-+ PIN_FIELD(73, 86, 0xb30, 0x10, 4, 1),
-+ PIN_FIELD(87, 90, 0xc30, 0x10, 0, 1),
-+ PIN_FIELD(91, 102, 0xb30, 0x10, 18, 1),
- };
-
- static const struct mtk_pin_field_calc mt7622_pin_pd_range[] = {
-- {0, 31, 0x940, 0x10, 0, 1},
-- {32, 50, 0xa40, 0x10, 0, 1},
-- {51, 70, 0x840, 0x10, 0, 1},
-- {71, 72, 0xb40, 0x10, 0, 1},
-- {73, 86, 0xb40, 0x10, 4, 1},
-- {87, 90, 0xc40, 0x10, 0, 1},
-- {91, 102, 0xb40, 0x10, 18, 1},
-+ PIN_FIELD(0, 31, 0x940, 0x10, 0, 1),
-+ PIN_FIELD(32, 50, 0xa40, 0x10, 0, 1),
-+ PIN_FIELD(51, 70, 0x840, 0x10, 0, 1),
-+ PIN_FIELD(71, 72, 0xb40, 0x10, 0, 1),
-+ PIN_FIELD(73, 86, 0xb40, 0x10, 4, 1),
-+ PIN_FIELD(87, 90, 0xc40, 0x10, 0, 1),
-+ PIN_FIELD(91, 102, 0xb40, 0x10, 18, 1),
- };
-
- static const struct mtk_pin_field_calc mt7622_pin_e4_range[] = {
-- {0, 31, 0x960, 0x10, 0, 1},
-- {32, 50, 0xa60, 0x10, 0, 1},
-- {51, 70, 0x860, 0x10, 0, 1},
-- {71, 72, 0xb60, 0x10, 0, 1},
-- {73, 86, 0xb60, 0x10, 4, 1},
-- {87, 90, 0xc60, 0x10, 0, 1},
-- {91, 102, 0xb60, 0x10, 18, 1},
-+ PIN_FIELD(0, 31, 0x960, 0x10, 0, 1),
-+ PIN_FIELD(32, 50, 0xa60, 0x10, 0, 1),
-+ PIN_FIELD(51, 70, 0x860, 0x10, 0, 1),
-+ PIN_FIELD(71, 72, 0xb60, 0x10, 0, 1),
-+ PIN_FIELD(73, 86, 0xb60, 0x10, 4, 1),
-+ PIN_FIELD(87, 90, 0xc60, 0x10, 0, 1),
-+ PIN_FIELD(91, 102, 0xb60, 0x10, 18, 1),
- };
-
- static const struct mtk_pin_field_calc mt7622_pin_e8_range[] = {
-- {0, 31, 0x970, 0x10, 0, 1},
-- {32, 50, 0xa70, 0x10, 0, 1},
-- {51, 70, 0x870, 0x10, 0, 1},
-- {71, 72, 0xb70, 0x10, 0, 1},
-- {73, 86, 0xb70, 0x10, 4, 1},
-- {87, 90, 0xc70, 0x10, 0, 1},
-- {91, 102, 0xb70, 0x10, 18, 1},
-+ PIN_FIELD(0, 31, 0x970, 0x10, 0, 1),
-+ PIN_FIELD(32, 50, 0xa70, 0x10, 0, 1),
-+ PIN_FIELD(51, 70, 0x870, 0x10, 0, 1),
-+ PIN_FIELD(71, 72, 0xb70, 0x10, 0, 1),
-+ PIN_FIELD(73, 86, 0xb70, 0x10, 4, 1),
-+ PIN_FIELD(87, 90, 0xc70, 0x10, 0, 1),
-+ PIN_FIELD(91, 102, 0xb70, 0x10, 18, 1),
- };
-
- static const struct mtk_pin_field_calc mt7622_pin_tdsel_range[] = {
-- {0, 31, 0x980, 0x4, 0, 4},
-- {32, 50, 0xa80, 0x4, 0, 4},
-- {51, 70, 0x880, 0x4, 0, 4},
-- {71, 72, 0xb80, 0x4, 0, 4},
-- {73, 86, 0xb80, 0x4, 16, 4},
-- {87, 90, 0xc80, 0x4, 0, 4},
-- {91, 102, 0xb88, 0x4, 8, 4},
-+ PIN_FIELD(0, 31, 0x980, 0x4, 0, 4),
-+ PIN_FIELD(32, 50, 0xa80, 0x4, 0, 4),
-+ PIN_FIELD(51, 70, 0x880, 0x4, 0, 4),
-+ PIN_FIELD(71, 72, 0xb80, 0x4, 0, 4),
-+ PIN_FIELD(73, 86, 0xb80, 0x4, 16, 4),
-+ PIN_FIELD(87, 90, 0xc80, 0x4, 0, 4),
-+ PIN_FIELD(91, 102, 0xb88, 0x4, 8, 4),
- };
-
- static const struct mtk_pin_field_calc mt7622_pin_rdsel_range[] = {
-- {0, 31, 0x990, 0x4, 0, 6},
-- {32, 50, 0xa90, 0x4, 0, 6},
-- {51, 58, 0x890, 0x4, 0, 6},
-- {59, 60, 0x894, 0x4, 28, 6},
-- {61, 62, 0x894, 0x4, 16, 6},
-- {63, 66, 0x898, 0x4, 8, 6},
-- {67, 68, 0x89c, 0x4, 12, 6},
-- {69, 70, 0x89c, 0x4, 0, 6},
-- {71, 72, 0xb90, 0x4, 0, 6},
-- {73, 86, 0xb90, 0x4, 24, 6},
-- {87, 90, 0xc90, 0x4, 0, 6},
-- {91, 102, 0xb9c, 0x4, 12, 6},
-+ PIN_FIELD(0, 31, 0x990, 0x4, 0, 6),
-+ PIN_FIELD(32, 50, 0xa90, 0x4, 0, 6),
-+ PIN_FIELD(51, 58, 0x890, 0x4, 0, 6),
-+ PIN_FIELD(59, 60, 0x894, 0x4, 28, 6),
-+ PIN_FIELD(61, 62, 0x894, 0x4, 16, 6),
-+ PIN_FIELD(63, 66, 0x898, 0x4, 8, 6),
-+ PIN_FIELD(67, 68, 0x89c, 0x4, 12, 6),
-+ PIN_FIELD(69, 70, 0x89c, 0x4, 0, 6),
-+ PIN_FIELD(71, 72, 0xb90, 0x4, 0, 6),
-+ PIN_FIELD(73, 86, 0xb90, 0x4, 24, 6),
-+ PIN_FIELD(87, 90, 0xc90, 0x4, 0, 6),
-+ PIN_FIELD(91, 102, 0xb9c, 0x4, 12, 6),
- };
-
- static const struct mtk_pin_reg_calc mt7622_reg_cals[PINCTRL_PIN_REG_MAX] = {
-@@ -309,110 +152,110 @@ static const struct mtk_pin_reg_calc mt7
- [PINCTRL_PIN_REG_RDSEL] = MTK_RANGE(mt7622_pin_rdsel_range),
- };
-
--static const struct pinctrl_pin_desc mt7622_pins[] = {
-- PINCTRL_PIN(0, "GPIO_A"),
-- PINCTRL_PIN(1, "I2S1_IN"),
-- PINCTRL_PIN(2, "I2S1_OUT"),
-- PINCTRL_PIN(3, "I2S_BCLK"),
-- PINCTRL_PIN(4, "I2S_WS"),
-- PINCTRL_PIN(5, "I2S_MCLK"),
-- PINCTRL_PIN(6, "TXD0"),
-- PINCTRL_PIN(7, "RXD0"),
-- PINCTRL_PIN(8, "SPI_WP"),
-- PINCTRL_PIN(9, "SPI_HOLD"),
-- PINCTRL_PIN(10, "SPI_CLK"),
-- PINCTRL_PIN(11, "SPI_MOSI"),
-- PINCTRL_PIN(12, "SPI_MISO"),
-- PINCTRL_PIN(13, "SPI_CS"),
-- PINCTRL_PIN(14, "I2C_SDA"),
-- PINCTRL_PIN(15, "I2C_SCL"),
-- PINCTRL_PIN(16, "I2S2_IN"),
-- PINCTRL_PIN(17, "I2S3_IN"),
-- PINCTRL_PIN(18, "I2S4_IN"),
-- PINCTRL_PIN(19, "I2S2_OUT"),
-- PINCTRL_PIN(20, "I2S3_OUT"),
-- PINCTRL_PIN(21, "I2S4_OUT"),
-- PINCTRL_PIN(22, "GPIO_B"),
-- PINCTRL_PIN(23, "MDC"),
-- PINCTRL_PIN(24, "MDIO"),
-- PINCTRL_PIN(25, "G2_TXD0"),
-- PINCTRL_PIN(26, "G2_TXD1"),
-- PINCTRL_PIN(27, "G2_TXD2"),
-- PINCTRL_PIN(28, "G2_TXD3"),
-- PINCTRL_PIN(29, "G2_TXEN"),
-- PINCTRL_PIN(30, "G2_TXC"),
-- PINCTRL_PIN(31, "G2_RXD0"),
-- PINCTRL_PIN(32, "G2_RXD1"),
-- PINCTRL_PIN(33, "G2_RXD2"),
-- PINCTRL_PIN(34, "G2_RXD3"),
-- PINCTRL_PIN(35, "G2_RXDV"),
-- PINCTRL_PIN(36, "G2_RXC"),
-- PINCTRL_PIN(37, "NCEB"),
-- PINCTRL_PIN(38, "NWEB"),
-- PINCTRL_PIN(39, "NREB"),
-- PINCTRL_PIN(40, "NDL4"),
-- PINCTRL_PIN(41, "NDL5"),
-- PINCTRL_PIN(42, "NDL6"),
-- PINCTRL_PIN(43, "NDL7"),
-- PINCTRL_PIN(44, "NRB"),
-- PINCTRL_PIN(45, "NCLE"),
-- PINCTRL_PIN(46, "NALE"),
-- PINCTRL_PIN(47, "NDL0"),
-- PINCTRL_PIN(48, "NDL1"),
-- PINCTRL_PIN(49, "NDL2"),
-- PINCTRL_PIN(50, "NDL3"),
-- PINCTRL_PIN(51, "MDI_TP_P0"),
-- PINCTRL_PIN(52, "MDI_TN_P0"),
-- PINCTRL_PIN(53, "MDI_RP_P0"),
-- PINCTRL_PIN(54, "MDI_RN_P0"),
-- PINCTRL_PIN(55, "MDI_TP_P1"),
-- PINCTRL_PIN(56, "MDI_TN_P1"),
-- PINCTRL_PIN(57, "MDI_RP_P1"),
-- PINCTRL_PIN(58, "MDI_RN_P1"),
-- PINCTRL_PIN(59, "MDI_RP_P2"),
-- PINCTRL_PIN(60, "MDI_RN_P2"),
-- PINCTRL_PIN(61, "MDI_TP_P2"),
-- PINCTRL_PIN(62, "MDI_TN_P2"),
-- PINCTRL_PIN(63, "MDI_TP_P3"),
-- PINCTRL_PIN(64, "MDI_TN_P3"),
-- PINCTRL_PIN(65, "MDI_RP_P3"),
-- PINCTRL_PIN(66, "MDI_RN_P3"),
-- PINCTRL_PIN(67, "MDI_RP_P4"),
-- PINCTRL_PIN(68, "MDI_RN_P4"),
-- PINCTRL_PIN(69, "MDI_TP_P4"),
-- PINCTRL_PIN(70, "MDI_TN_P4"),
-- PINCTRL_PIN(71, "PMIC_SCL"),
-- PINCTRL_PIN(72, "PMIC_SDA"),
-- PINCTRL_PIN(73, "SPIC1_CLK"),
-- PINCTRL_PIN(74, "SPIC1_MOSI"),
-- PINCTRL_PIN(75, "SPIC1_MISO"),
-- PINCTRL_PIN(76, "SPIC1_CS"),
-- PINCTRL_PIN(77, "GPIO_D"),
-- PINCTRL_PIN(78, "WATCHDOG"),
-- PINCTRL_PIN(79, "RTS3_N"),
-- PINCTRL_PIN(80, "CTS3_N"),
-- PINCTRL_PIN(81, "TXD3"),
-- PINCTRL_PIN(82, "RXD3"),
-- PINCTRL_PIN(83, "PERST0_N"),
-- PINCTRL_PIN(84, "PERST1_N"),
-- PINCTRL_PIN(85, "WLED_N"),
-- PINCTRL_PIN(86, "EPHY_LED0_N"),
-- PINCTRL_PIN(87, "AUXIN0"),
-- PINCTRL_PIN(88, "AUXIN1"),
-- PINCTRL_PIN(89, "AUXIN2"),
-- PINCTRL_PIN(90, "AUXIN3"),
-- PINCTRL_PIN(91, "TXD4"),
-- PINCTRL_PIN(92, "RXD4"),
-- PINCTRL_PIN(93, "RTS4_N"),
-- PINCTRL_PIN(94, "CTS4_N"),
-- PINCTRL_PIN(95, "PWM1"),
-- PINCTRL_PIN(96, "PWM2"),
-- PINCTRL_PIN(97, "PWM3"),
-- PINCTRL_PIN(98, "PWM4"),
-- PINCTRL_PIN(99, "PWM5"),
-- PINCTRL_PIN(100, "PWM6"),
-- PINCTRL_PIN(101, "PWM7"),
-- PINCTRL_PIN(102, "GPIO_E"),
-+static const struct mtk_pin_desc mt7622_pins[] = {
-+ MT7622_PIN(0, "GPIO_A"),
-+ MT7622_PIN(1, "I2S1_IN"),
-+ MT7622_PIN(2, "I2S1_OUT"),
-+ MT7622_PIN(3, "I2S_BCLK"),
-+ MT7622_PIN(4, "I2S_WS"),
-+ MT7622_PIN(5, "I2S_MCLK"),
-+ MT7622_PIN(6, "TXD0"),
-+ MT7622_PIN(7, "RXD0"),
-+ MT7622_PIN(8, "SPI_WP"),
-+ MT7622_PIN(9, "SPI_HOLD"),
-+ MT7622_PIN(10, "SPI_CLK"),
-+ MT7622_PIN(11, "SPI_MOSI"),
-+ MT7622_PIN(12, "SPI_MISO"),
-+ MT7622_PIN(13, "SPI_CS"),
-+ MT7622_PIN(14, "I2C_SDA"),
-+ MT7622_PIN(15, "I2C_SCL"),
-+ MT7622_PIN(16, "I2S2_IN"),
-+ MT7622_PIN(17, "I2S3_IN"),
-+ MT7622_PIN(18, "I2S4_IN"),
-+ MT7622_PIN(19, "I2S2_OUT"),
-+ MT7622_PIN(20, "I2S3_OUT"),
-+ MT7622_PIN(21, "I2S4_OUT"),
-+ MT7622_PIN(22, "GPIO_B"),
-+ MT7622_PIN(23, "MDC"),
-+ MT7622_PIN(24, "MDIO"),
-+ MT7622_PIN(25, "G2_TXD0"),
-+ MT7622_PIN(26, "G2_TXD1"),
-+ MT7622_PIN(27, "G2_TXD2"),
-+ MT7622_PIN(28, "G2_TXD3"),
-+ MT7622_PIN(29, "G2_TXEN"),
-+ MT7622_PIN(30, "G2_TXC"),
-+ MT7622_PIN(31, "G2_RXD0"),
-+ MT7622_PIN(32, "G2_RXD1"),
-+ MT7622_PIN(33, "G2_RXD2"),
-+ MT7622_PIN(34, "G2_RXD3"),
-+ MT7622_PIN(35, "G2_RXDV"),
-+ MT7622_PIN(36, "G2_RXC"),
-+ MT7622_PIN(37, "NCEB"),
-+ MT7622_PIN(38, "NWEB"),
-+ MT7622_PIN(39, "NREB"),
-+ MT7622_PIN(40, "NDL4"),
-+ MT7622_PIN(41, "NDL5"),
-+ MT7622_PIN(42, "NDL6"),
-+ MT7622_PIN(43, "NDL7"),
-+ MT7622_PIN(44, "NRB"),
-+ MT7622_PIN(45, "NCLE"),
-+ MT7622_PIN(46, "NALE"),
-+ MT7622_PIN(47, "NDL0"),
-+ MT7622_PIN(48, "NDL1"),
-+ MT7622_PIN(49, "NDL2"),
-+ MT7622_PIN(50, "NDL3"),
-+ MT7622_PIN(51, "MDI_TP_P0"),
-+ MT7622_PIN(52, "MDI_TN_P0"),
-+ MT7622_PIN(53, "MDI_RP_P0"),
-+ MT7622_PIN(54, "MDI_RN_P0"),
-+ MT7622_PIN(55, "MDI_TP_P1"),
-+ MT7622_PIN(56, "MDI_TN_P1"),
-+ MT7622_PIN(57, "MDI_RP_P1"),
-+ MT7622_PIN(58, "MDI_RN_P1"),
-+ MT7622_PIN(59, "MDI_RP_P2"),
-+ MT7622_PIN(60, "MDI_RN_P2"),
-+ MT7622_PIN(61, "MDI_TP_P2"),
-+ MT7622_PIN(62, "MDI_TN_P2"),
-+ MT7622_PIN(63, "MDI_TP_P3"),
-+ MT7622_PIN(64, "MDI_TN_P3"),
-+ MT7622_PIN(65, "MDI_RP_P3"),
-+ MT7622_PIN(66, "MDI_RN_P3"),
-+ MT7622_PIN(67, "MDI_RP_P4"),
-+ MT7622_PIN(68, "MDI_RN_P4"),
-+ MT7622_PIN(69, "MDI_TP_P4"),
-+ MT7622_PIN(70, "MDI_TN_P4"),
-+ MT7622_PIN(71, "PMIC_SCL"),
-+ MT7622_PIN(72, "PMIC_SDA"),
-+ MT7622_PIN(73, "SPIC1_CLK"),
-+ MT7622_PIN(74, "SPIC1_MOSI"),
-+ MT7622_PIN(75, "SPIC1_MISO"),
-+ MT7622_PIN(76, "SPIC1_CS"),
-+ MT7622_PIN(77, "GPIO_D"),
-+ MT7622_PIN(78, "WATCHDOG"),
-+ MT7622_PIN(79, "RTS3_N"),
-+ MT7622_PIN(80, "CTS3_N"),
-+ MT7622_PIN(81, "TXD3"),
-+ MT7622_PIN(82, "RXD3"),
-+ MT7622_PIN(83, "PERST0_N"),
-+ MT7622_PIN(84, "PERST1_N"),
-+ MT7622_PIN(85, "WLED_N"),
-+ MT7622_PIN(86, "EPHY_LED0_N"),
-+ MT7622_PIN(87, "AUXIN0"),
-+ MT7622_PIN(88, "AUXIN1"),
-+ MT7622_PIN(89, "AUXIN2"),
-+ MT7622_PIN(90, "AUXIN3"),
-+ MT7622_PIN(91, "TXD4"),
-+ MT7622_PIN(92, "RXD4"),
-+ MT7622_PIN(93, "RTS4_N"),
-+ MT7622_PIN(94, "CTS4_N"),
-+ MT7622_PIN(95, "PWM1"),
-+ MT7622_PIN(96, "PWM2"),
-+ MT7622_PIN(97, "PWM3"),
-+ MT7622_PIN(98, "PWM4"),
-+ MT7622_PIN(99, "PWM5"),
-+ MT7622_PIN(100, "PWM6"),
-+ MT7622_PIN(101, "PWM7"),
-+ MT7622_PIN(102, "GPIO_E"),
- };
-
- /* List all groups consisting of these pins dedicated to the enablement of
-@@ -906,18 +749,6 @@ static const struct function_desc mt7622
- {"watchdog", mt7622_wdt_groups, ARRAY_SIZE(mt7622_wdt_groups)},
- };
-
--static const struct pinconf_generic_params mtk_custom_bindings[] = {
-- {"mediatek,tdsel", MTK_PIN_CONFIG_TDSEL, 0},
-- {"mediatek,rdsel", MTK_PIN_CONFIG_RDSEL, 0},
--};
--
--#ifdef CONFIG_DEBUG_FS
--static const struct pin_config_item mtk_conf_items[] = {
-- PCONFDUMP(MTK_PIN_CONFIG_TDSEL, "tdsel", NULL, true),
-- PCONFDUMP(MTK_PIN_CONFIG_RDSEL, "rdsel", NULL, true),
--};
--#endif
--
- static const struct mtk_eint_hw mt7622_eint_hw = {
- .port_mask = 7,
- .ports = 7,
-@@ -934,830 +765,38 @@ static const struct mtk_pin_soc mt7622_d
- .funcs = mt7622_functions,
- .nfuncs = ARRAY_SIZE(mt7622_functions),
- .eint_hw = &mt7622_eint_hw,
-+ .gpio_m = 1,
-+ .ies_present = false,
-+ .base_names = mtk_default_register_base_names,
-+ .nbase_names = ARRAY_SIZE(mtk_default_register_base_names),
-+ .bias_disable_set = mtk_pinconf_bias_disable_set,
-+ .bias_disable_get = mtk_pinconf_bias_disable_get,
-+ .bias_set = mtk_pinconf_bias_set,
-+ .bias_get = mtk_pinconf_bias_get,
-+ .drive_set = mtk_pinconf_drive_set,
-+ .drive_get = mtk_pinconf_drive_get,
- };
-
--static void mtk_w32(struct mtk_pinctrl *pctl, u32 reg, u32 val)
--{
-- writel_relaxed(val, pctl->base + reg);
--}
--
--static u32 mtk_r32(struct mtk_pinctrl *pctl, u32 reg)
--{
-- return readl_relaxed(pctl->base + reg);
--}
--
--static void mtk_rmw(struct mtk_pinctrl *pctl, u32 reg, u32 mask, u32 set)
--{
-- u32 val;
--
-- val = mtk_r32(pctl, reg);
-- val &= ~mask;
-- val |= set;
-- mtk_w32(pctl, reg, val);
--}
--
--static int mtk_hw_pin_field_lookup(struct mtk_pinctrl *hw, int pin,
-- const struct mtk_pin_reg_calc *rc,
-- struct mtk_pin_field *pfd)
--{
-- const struct mtk_pin_field_calc *c, *e;
-- u32 bits;
--
-- c = rc->range;
-- e = c + rc->nranges;
--
-- while (c < e) {
-- if (pin >= c->s_pin && pin <= c->e_pin)
-- break;
-- c++;
-- }
--
-- if (c >= e) {
-- dev_err(hw->dev, "Out of range for pin = %d\n", pin);
-- return -EINVAL;
-- }
--
-- /* Caculated bits as the overall offset the pin is located at */
-- bits = c->s_bit + (pin - c->s_pin) * (c->x_bits);
--
-- /* Fill pfd from bits and 32-bit register applied is assumed */
-- pfd->offset = c->s_addr + c->x_addrs * (bits / 32);
-- pfd->bitpos = bits % 32;
-- pfd->mask = (1 << c->x_bits) - 1;
--
-- /* pfd->next is used for indicating that bit wrapping-around happens
-- * which requires the manipulation for bit 0 starting in the next
-- * register to form the complete field read/write.
-- */
-- pfd->next = pfd->bitpos + c->x_bits - 1 > 31 ? c->x_addrs : 0;
--
-- return 0;
--}
--
--static int mtk_hw_pin_field_get(struct mtk_pinctrl *hw, int pin,
-- int field, struct mtk_pin_field *pfd)
--{
-- const struct mtk_pin_reg_calc *rc;
--
-- if (field < 0 || field >= PINCTRL_PIN_REG_MAX) {
-- dev_err(hw->dev, "Invalid Field %d\n", field);
-- return -EINVAL;
-- }
--
-- if (hw->soc->reg_cal && hw->soc->reg_cal[field].range) {
-- rc = &hw->soc->reg_cal[field];
-- } else {
-- dev_err(hw->dev, "Undefined range for field %d\n", field);
-- return -EINVAL;
-- }
--
-- return mtk_hw_pin_field_lookup(hw, pin, rc, pfd);
--}
--
--static void mtk_hw_bits_part(struct mtk_pin_field *pf, int *h, int *l)
--{
-- *l = 32 - pf->bitpos;
-- *h = get_count_order(pf->mask) - *l;
--}
--
--static void mtk_hw_write_cross_field(struct mtk_pinctrl *hw,
-- struct mtk_pin_field *pf, int value)
--{
-- int nbits_l, nbits_h;
--
-- mtk_hw_bits_part(pf, &nbits_h, &nbits_l);
--
-- mtk_rmw(hw, pf->offset, pf->mask << pf->bitpos,
-- (value & pf->mask) << pf->bitpos);
--
-- mtk_rmw(hw, pf->offset + pf->next, BIT(nbits_h) - 1,
-- (value & pf->mask) >> nbits_l);
--}
--
--static void mtk_hw_read_cross_field(struct mtk_pinctrl *hw,
-- struct mtk_pin_field *pf, int *value)
--{
-- int nbits_l, nbits_h, h, l;
--
-- mtk_hw_bits_part(pf, &nbits_h, &nbits_l);
--
-- l = (mtk_r32(hw, pf->offset) >> pf->bitpos) & (BIT(nbits_l) - 1);
-- h = (mtk_r32(hw, pf->offset + pf->next)) & (BIT(nbits_h) - 1);
--
-- *value = (h << nbits_l) | l;
--}
--
--static int mtk_hw_set_value(struct mtk_pinctrl *hw, int pin, int field,
-- int value)
--{
-- struct mtk_pin_field pf;
-- int err;
--
-- err = mtk_hw_pin_field_get(hw, pin, field, &pf);
-- if (err)
-- return err;
--
-- if (!pf.next)
-- mtk_rmw(hw, pf.offset, pf.mask << pf.bitpos,
-- (value & pf.mask) << pf.bitpos);
-- else
-- mtk_hw_write_cross_field(hw, &pf, value);
--
-- return 0;
--}
--
--static int mtk_hw_get_value(struct mtk_pinctrl *hw, int pin, int field,
-- int *value)
--{
-- struct mtk_pin_field pf;
-- int err;
--
-- err = mtk_hw_pin_field_get(hw, pin, field, &pf);
-- if (err)
-- return err;
--
-- if (!pf.next)
-- *value = (mtk_r32(hw, pf.offset) >> pf.bitpos) & pf.mask;
-- else
-- mtk_hw_read_cross_field(hw, &pf, value);
--
-- return 0;
--}
--
--static int mtk_pinmux_set_mux(struct pinctrl_dev *pctldev,
-- unsigned int selector, unsigned int group)
--{
-- struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
-- struct function_desc *func;
-- struct group_desc *grp;
-- int i;
--
-- func = pinmux_generic_get_function(pctldev, selector);
-- if (!func)
-- return -EINVAL;
--
-- grp = pinctrl_generic_get_group(pctldev, group);
-- if (!grp)
-- return -EINVAL;
--
-- dev_dbg(pctldev->dev, "enable function %s group %s\n",
-- func->name, grp->name);
--
-- for (i = 0; i < grp->num_pins; i++) {
-- int *pin_modes = grp->data;
--
-- mtk_hw_set_value(hw, grp->pins[i], PINCTRL_PIN_REG_MODE,
-- pin_modes[i]);
-- }
--
-- return 0;
--}
--
--static int mtk_pinmux_gpio_request_enable(struct pinctrl_dev *pctldev,
-- struct pinctrl_gpio_range *range,
-- unsigned int pin)
--{
-- struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
--
-- return mtk_hw_set_value(hw, pin, PINCTRL_PIN_REG_MODE, MTK_GPIO_MODE);
--}
--
--static int mtk_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev,
-- struct pinctrl_gpio_range *range,
-- unsigned int pin, bool input)
--{
-- struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
--
-- /* hardware would take 0 as input direction */
-- return mtk_hw_set_value(hw, pin, PINCTRL_PIN_REG_DIR, !input);
--}
--
--static int mtk_pinconf_get(struct pinctrl_dev *pctldev,
-- unsigned int pin, unsigned long *config)
--{
-- struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
-- u32 param = pinconf_to_config_param(*config);
-- int val, val2, err, reg, ret = 1;
--
-- switch (param) {
-- case PIN_CONFIG_BIAS_DISABLE:
-- err = mtk_hw_get_value(hw, pin, PINCTRL_PIN_REG_PU, &val);
-- if (err)
-- return err;
--
-- err = mtk_hw_get_value(hw, pin, PINCTRL_PIN_REG_PD, &val2);
-- if (err)
-- return err;
--
-- if (val || val2)
-- return -EINVAL;
--
-- break;
-- case PIN_CONFIG_BIAS_PULL_UP:
-- case PIN_CONFIG_BIAS_PULL_DOWN:
-- case PIN_CONFIG_SLEW_RATE:
-- reg = (param == PIN_CONFIG_BIAS_PULL_UP) ?
-- PINCTRL_PIN_REG_PU :
-- (param == PIN_CONFIG_BIAS_PULL_DOWN) ?
-- PINCTRL_PIN_REG_PD : PINCTRL_PIN_REG_SR;
--
-- err = mtk_hw_get_value(hw, pin, reg, &val);
-- if (err)
-- return err;
--
-- if (!val)
-- return -EINVAL;
--
-- break;
-- case PIN_CONFIG_INPUT_ENABLE:
-- case PIN_CONFIG_OUTPUT_ENABLE:
-- err = mtk_hw_get_value(hw, pin, PINCTRL_PIN_REG_DIR, &val);
-- if (err)
-- return err;
--
-- /* HW takes input mode as zero; output mode as non-zero */
-- if ((val && param == PIN_CONFIG_INPUT_ENABLE) ||
-- (!val && param == PIN_CONFIG_OUTPUT_ENABLE))
-- return -EINVAL;
--
-- break;
-- case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
-- err = mtk_hw_get_value(hw, pin, PINCTRL_PIN_REG_DIR, &val);
-- if (err)
-- return err;
--
-- err = mtk_hw_get_value(hw, pin, PINCTRL_PIN_REG_SMT, &val2);
-- if (err)
-- return err;
--
-- if (val || !val2)
-- return -EINVAL;
--
-- break;
-- case PIN_CONFIG_DRIVE_STRENGTH:
-- err = mtk_hw_get_value(hw, pin, PINCTRL_PIN_REG_E4, &val);
-- if (err)
-- return err;
--
-- err = mtk_hw_get_value(hw, pin, PINCTRL_PIN_REG_E8, &val2);
-- if (err)
-- return err;
--
-- /* 4mA when (e8, e4) = (0, 0); 8mA when (e8, e4) = (0, 1)
-- * 12mA when (e8, e4) = (1, 0); 16mA when (e8, e4) = (1, 1)
-- */
-- ret = ((val2 << 1) + val + 1) * 4;
--
-- break;
-- case MTK_PIN_CONFIG_TDSEL:
-- case MTK_PIN_CONFIG_RDSEL:
-- reg = (param == MTK_PIN_CONFIG_TDSEL) ?
-- PINCTRL_PIN_REG_TDSEL : PINCTRL_PIN_REG_RDSEL;
--
-- err = mtk_hw_get_value(hw, pin, reg, &val);
-- if (err)
-- return err;
--
-- ret = val;
--
-- break;
-- default:
-- return -ENOTSUPP;
-- }
--
-- *config = pinconf_to_config_packed(param, ret);
--
-- return 0;
--}
--
--static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
-- unsigned long *configs, unsigned int num_configs)
--{
-- struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
-- u32 reg, param, arg;
-- int cfg, err = 0;
--
-- for (cfg = 0; cfg < num_configs; cfg++) {
-- param = pinconf_to_config_param(configs[cfg]);
-- arg = pinconf_to_config_argument(configs[cfg]);
--
-- switch (param) {
-- case PIN_CONFIG_BIAS_DISABLE:
-- case PIN_CONFIG_BIAS_PULL_UP:
-- case PIN_CONFIG_BIAS_PULL_DOWN:
-- arg = (param == PIN_CONFIG_BIAS_DISABLE) ? 0 :
-- (param == PIN_CONFIG_BIAS_PULL_UP) ? 1 : 2;
--
-- err = mtk_hw_set_value(hw, pin, PINCTRL_PIN_REG_PU,
-- arg & 1);
-- if (err)
-- goto err;
--
-- err = mtk_hw_set_value(hw, pin, PINCTRL_PIN_REG_PD,
-- !!(arg & 2));
-- if (err)
-- goto err;
-- break;
-- case PIN_CONFIG_OUTPUT_ENABLE:
-- err = mtk_hw_set_value(hw, pin, PINCTRL_PIN_REG_SMT,
-- MTK_DISABLE);
-- if (err)
-- goto err;
-- /* else: fall through */
-- case PIN_CONFIG_INPUT_ENABLE:
-- case PIN_CONFIG_SLEW_RATE:
-- reg = (param == PIN_CONFIG_SLEW_RATE) ?
-- PINCTRL_PIN_REG_SR : PINCTRL_PIN_REG_DIR;
--
-- arg = (param == PIN_CONFIG_INPUT_ENABLE) ? 0 :
-- (param == PIN_CONFIG_OUTPUT_ENABLE) ? 1 : arg;
-- err = mtk_hw_set_value(hw, pin, reg, arg);
-- if (err)
-- goto err;
--
-- break;
-- case PIN_CONFIG_OUTPUT:
-- err = mtk_hw_set_value(hw, pin, PINCTRL_PIN_REG_DIR,
-- MTK_OUTPUT);
-- if (err)
-- goto err;
--
-- err = mtk_hw_set_value(hw, pin, PINCTRL_PIN_REG_DO,
-- arg);
-- if (err)
-- goto err;
-- break;
-- case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
-- /* arg = 1: Input mode & SMT enable ;
-- * arg = 0: Output mode & SMT disable
-- */
-- arg = arg ? 2 : 1;
-- err = mtk_hw_set_value(hw, pin, PINCTRL_PIN_REG_DIR,
-- arg & 1);
-- if (err)
-- goto err;
--
-- err = mtk_hw_set_value(hw, pin, PINCTRL_PIN_REG_SMT,
-- !!(arg & 2));
-- if (err)
-- goto err;
-- break;
-- case PIN_CONFIG_DRIVE_STRENGTH:
-- /* 4mA when (e8, e4) = (0, 0);
-- * 8mA when (e8, e4) = (0, 1);
-- * 12mA when (e8, e4) = (1, 0);
-- * 16mA when (e8, e4) = (1, 1)
-- */
-- if (!(arg % 4) && (arg >= 4 && arg <= 16)) {
-- arg = arg / 4 - 1;
-- err = mtk_hw_set_value(hw, pin,
-- PINCTRL_PIN_REG_E4,
-- arg & 0x1);
-- if (err)
-- goto err;
--
-- err = mtk_hw_set_value(hw, pin,
-- PINCTRL_PIN_REG_E8,
-- (arg & 0x2) >> 1);
-- if (err)
-- goto err;
-- } else {
-- err = -ENOTSUPP;
-- }
-- break;
-- case MTK_PIN_CONFIG_TDSEL:
-- case MTK_PIN_CONFIG_RDSEL:
-- reg = (param == MTK_PIN_CONFIG_TDSEL) ?
-- PINCTRL_PIN_REG_TDSEL : PINCTRL_PIN_REG_RDSEL;
--
-- err = mtk_hw_set_value(hw, pin, reg, arg);
-- if (err)
-- goto err;
-- break;
-- default:
-- err = -ENOTSUPP;
-- }
-- }
--err:
-- return err;
--}
--
--static int mtk_pinconf_group_get(struct pinctrl_dev *pctldev,
-- unsigned int group, unsigned long *config)
--{
-- const unsigned int *pins;
-- unsigned int i, npins, old = 0;
-- int ret;
--
-- ret = pinctrl_generic_get_group_pins(pctldev, group, &pins, &npins);
-- if (ret)
-- return ret;
--
-- for (i = 0; i < npins; i++) {
-- if (mtk_pinconf_get(pctldev, pins[i], config))
-- return -ENOTSUPP;
--
-- /* configs do not match between two pins */
-- if (i && old != *config)
-- return -ENOTSUPP;
--
-- old = *config;
-- }
--
-- return 0;
--}
--
--static int mtk_pinconf_group_set(struct pinctrl_dev *pctldev,
-- unsigned int group, unsigned long *configs,
-- unsigned int num_configs)
--{
-- const unsigned int *pins;
-- unsigned int i, npins;
-- int ret;
--
-- ret = pinctrl_generic_get_group_pins(pctldev, group, &pins, &npins);
-- if (ret)
-- return ret;
--
-- for (i = 0; i < npins; i++) {
-- ret = mtk_pinconf_set(pctldev, pins[i], configs, num_configs);
-- if (ret)
-- return ret;
-- }
--
-- return 0;
--}
--
--static const struct pinctrl_ops mtk_pctlops = {
-- .get_groups_count = pinctrl_generic_get_group_count,
-- .get_group_name = pinctrl_generic_get_group_name,
-- .get_group_pins = pinctrl_generic_get_group_pins,
-- .dt_node_to_map = pinconf_generic_dt_node_to_map_all,
-- .dt_free_map = pinconf_generic_dt_free_map,
--};
--
--static const struct pinmux_ops mtk_pmxops = {
-- .get_functions_count = pinmux_generic_get_function_count,
-- .get_function_name = pinmux_generic_get_function_name,
-- .get_function_groups = pinmux_generic_get_function_groups,
-- .set_mux = mtk_pinmux_set_mux,
-- .gpio_request_enable = mtk_pinmux_gpio_request_enable,
-- .gpio_set_direction = mtk_pinmux_gpio_set_direction,
-- .strict = true,
--};
--
--static const struct pinconf_ops mtk_confops = {
-- .is_generic = true,
-- .pin_config_get = mtk_pinconf_get,
-- .pin_config_set = mtk_pinconf_set,
-- .pin_config_group_get = mtk_pinconf_group_get,
-- .pin_config_group_set = mtk_pinconf_group_set,
-- .pin_config_config_dbg_show = pinconf_generic_dump_config,
--};
--
--static struct pinctrl_desc mtk_desc = {
-- .name = PINCTRL_PINCTRL_DEV,
-- .pctlops = &mtk_pctlops,
-- .pmxops = &mtk_pmxops,
-- .confops = &mtk_confops,
-- .owner = THIS_MODULE,
--};
--
--static int mtk_gpio_get(struct gpio_chip *chip, unsigned int gpio)
--{
-- struct mtk_pinctrl *hw = gpiochip_get_data(chip);
-- int value, err;
--
-- err = mtk_hw_get_value(hw, gpio, PINCTRL_PIN_REG_DI, &value);
-- if (err)
-- return err;
--
-- return !!value;
--}
--
--static void mtk_gpio_set(struct gpio_chip *chip, unsigned int gpio, int value)
--{
-- struct mtk_pinctrl *hw = gpiochip_get_data(chip);
--
-- mtk_hw_set_value(hw, gpio, PINCTRL_PIN_REG_DO, !!value);
--}
--
--static int mtk_gpio_direction_input(struct gpio_chip *chip, unsigned int gpio)
--{
-- return pinctrl_gpio_direction_input(chip->base + gpio);
--}
--
--static int mtk_gpio_direction_output(struct gpio_chip *chip, unsigned int gpio,
-- int value)
--{
-- mtk_gpio_set(chip, gpio, value);
--
-- return pinctrl_gpio_direction_output(chip->base + gpio);
--}
--
--static int mtk_gpio_to_irq(struct gpio_chip *chip, unsigned int offset)
--{
-- struct mtk_pinctrl *hw = gpiochip_get_data(chip);
-- unsigned long eint_n;
--
-- if (!hw->eint)
-- return -ENOTSUPP;
--
-- eint_n = offset;
--
-- return mtk_eint_find_irq(hw->eint, eint_n);
--}
--
--static int mtk_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
-- unsigned long config)
--{
-- struct mtk_pinctrl *hw = gpiochip_get_data(chip);
-- unsigned long eint_n;
-- u32 debounce;
--
-- if (!hw->eint ||
-- pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE)
-- return -ENOTSUPP;
--
-- debounce = pinconf_to_config_argument(config);
-- eint_n = offset;
--
-- return mtk_eint_set_debounce(hw->eint, eint_n, debounce);
--}
--
--static int mtk_build_gpiochip(struct mtk_pinctrl *hw, struct device_node *np)
--{
-- struct gpio_chip *chip = &hw->chip;
-- int ret;
--
-- chip->label = PINCTRL_PINCTRL_DEV;
-- chip->parent = hw->dev;
-- chip->request = gpiochip_generic_request;
-- chip->free = gpiochip_generic_free;
-- chip->direction_input = mtk_gpio_direction_input;
-- chip->direction_output = mtk_gpio_direction_output;
-- chip->get = mtk_gpio_get;
-- chip->set = mtk_gpio_set;
-- chip->to_irq = mtk_gpio_to_irq,
-- chip->set_config = mtk_gpio_set_config,
-- chip->base = -1;
-- chip->ngpio = hw->soc->npins;
-- chip->of_node = np;
-- chip->of_gpio_n_cells = 2;
--
-- ret = gpiochip_add_data(chip, hw);
-- if (ret < 0)
-- return ret;
--
-- /* Just for backward compatible for these old pinctrl nodes without
-- * "gpio-ranges" property. Otherwise, called directly from a
-- * DeviceTree-supported pinctrl driver is DEPRECATED.
-- * Please see Section 2.1 of
-- * Documentation/devicetree/bindings/gpio/gpio.txt on how to
-- * bind pinctrl and gpio drivers via the "gpio-ranges" property.
-- */
-- if (!of_find_property(np, "gpio-ranges", NULL)) {
-- ret = gpiochip_add_pin_range(chip, dev_name(hw->dev), 0, 0,
-- chip->ngpio);
-- if (ret < 0) {
-- gpiochip_remove(chip);
-- return ret;
-- }
-- }
--
-- return 0;
--}
--
--static int mtk_build_groups(struct mtk_pinctrl *hw)
--{
-- int err, i;
--
-- for (i = 0; i < hw->soc->ngrps; i++) {
-- const struct group_desc *group = hw->soc->grps + i;
--
-- err = pinctrl_generic_add_group(hw->pctrl, group->name,
-- group->pins, group->num_pins,
-- group->data);
-- if (err < 0) {
-- dev_err(hw->dev, "Failed to register group %s\n",
-- group->name);
-- return err;
-- }
-- }
--
-- return 0;
--}
--
--static int mtk_build_functions(struct mtk_pinctrl *hw)
--{
-- int i, err;
--
-- for (i = 0; i < hw->soc->nfuncs ; i++) {
-- const struct function_desc *func = hw->soc->funcs + i;
--
-- err = pinmux_generic_add_function(hw->pctrl, func->name,
-- func->group_names,
-- func->num_group_names,
-- func->data);
-- if (err < 0) {
-- dev_err(hw->dev, "Failed to register function %s\n",
-- func->name);
-- return err;
-- }
-- }
--
-- return 0;
--}
--
--static int mtk_xt_get_gpio_n(void *data, unsigned long eint_n,
-- unsigned int *gpio_n,
-- struct gpio_chip **gpio_chip)
--{
-- struct mtk_pinctrl *hw = (struct mtk_pinctrl *)data;
--
-- *gpio_chip = &hw->chip;
-- *gpio_n = eint_n;
--
-- return 0;
--}
--
--static int mtk_xt_get_gpio_state(void *data, unsigned long eint_n)
--{
-- struct mtk_pinctrl *hw = (struct mtk_pinctrl *)data;
-- struct gpio_chip *gpio_chip;
-- unsigned int gpio_n;
-- int err;
--
-- err = mtk_xt_get_gpio_n(hw, eint_n, &gpio_n, &gpio_chip);
-- if (err)
-- return err;
--
-- return mtk_gpio_get(gpio_chip, gpio_n);
--}
--
--static int mtk_xt_set_gpio_as_eint(void *data, unsigned long eint_n)
--{
-- struct mtk_pinctrl *hw = (struct mtk_pinctrl *)data;
-- struct gpio_chip *gpio_chip;
-- unsigned int gpio_n;
-- int err;
--
-- err = mtk_xt_get_gpio_n(hw, eint_n, &gpio_n, &gpio_chip);
-- if (err)
-- return err;
--
-- err = mtk_hw_set_value(hw, gpio_n, PINCTRL_PIN_REG_MODE,
-- MTK_GPIO_MODE);
-- if (err)
-- return err;
--
-- err = mtk_hw_set_value(hw, gpio_n, PINCTRL_PIN_REG_DIR, MTK_INPUT);
-- if (err)
-- return err;
--
-- err = mtk_hw_set_value(hw, gpio_n, PINCTRL_PIN_REG_SMT, MTK_ENABLE);
-- if (err)
-- return err;
--
-- return 0;
--}
--
--static const struct mtk_eint_xt mtk_eint_xt = {
-- .get_gpio_n = mtk_xt_get_gpio_n,
-- .get_gpio_state = mtk_xt_get_gpio_state,
-- .set_gpio_as_eint = mtk_xt_set_gpio_as_eint,
--};
--
--static int
--mtk_build_eint(struct mtk_pinctrl *hw, struct platform_device *pdev)
--{
-- struct device_node *np = pdev->dev.of_node;
-- struct resource *res;
--
-- if (!IS_ENABLED(CONFIG_EINT_MTK))
-- return 0;
--
-- if (!of_property_read_bool(np, "interrupt-controller"))
-- return -ENODEV;
--
-- hw->eint = devm_kzalloc(hw->dev, sizeof(*hw->eint), GFP_KERNEL);
-- if (!hw->eint)
-- return -ENOMEM;
--
-- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "eint");
-- if (!res) {
-- dev_err(&pdev->dev, "Unable to get eint resource\n");
-- return -ENODEV;
-- }
--
-- hw->eint->base = devm_ioremap_resource(&pdev->dev, res);
-- if (IS_ERR(hw->eint->base))
-- return PTR_ERR(hw->eint->base);
--
-- hw->eint->irq = irq_of_parse_and_map(np, 0);
-- if (!hw->eint->irq)
-- return -EINVAL;
--
-- hw->eint->dev = &pdev->dev;
-- hw->eint->hw = hw->soc->eint_hw;
-- hw->eint->pctl = hw;
-- hw->eint->gpio_xlate = &mtk_eint_xt;
--
-- return mtk_eint_do_init(hw->eint);
--}
--
--static const struct of_device_id mtk_pinctrl_of_match[] = {
-- { .compatible = "mediatek,mt7622-pinctrl", .data = &mt7622_data},
-+static const struct of_device_id mt7622_pinctrl_of_match[] = {
-+ { .compatible = "mediatek,mt7622-pinctrl", },
- { }
- };
-
--static int mtk_pinctrl_probe(struct platform_device *pdev)
-+static int mt7622_pinctrl_probe(struct platform_device *pdev)
- {
-- struct resource *res;
-- struct mtk_pinctrl *hw;
-- const struct of_device_id *of_id =
-- of_match_device(mtk_pinctrl_of_match, &pdev->dev);
-- int err;
--
-- hw = devm_kzalloc(&pdev->dev, sizeof(*hw), GFP_KERNEL);
-- if (!hw)
-- return -ENOMEM;
--
-- hw->soc = of_id->data;
--
-- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-- if (!res) {
-- dev_err(&pdev->dev, "missing IO resource\n");
-- return -ENXIO;
-- }
--
-- hw->dev = &pdev->dev;
-- hw->base = devm_ioremap_resource(&pdev->dev, res);
-- if (IS_ERR(hw->base))
-- return PTR_ERR(hw->base);
--
-- /* Setup pins descriptions per SoC types */
-- mtk_desc.pins = hw->soc->pins;
-- mtk_desc.npins = hw->soc->npins;
-- mtk_desc.num_custom_params = ARRAY_SIZE(mtk_custom_bindings);
-- mtk_desc.custom_params = mtk_custom_bindings;
--#ifdef CONFIG_DEBUG_FS
-- mtk_desc.custom_conf_items = mtk_conf_items;
--#endif
--
-- err = devm_pinctrl_register_and_init(&pdev->dev, &mtk_desc, hw,
-- &hw->pctrl);
-- if (err)
-- return err;
--
-- /* Setup groups descriptions per SoC types */
-- err = mtk_build_groups(hw);
-- if (err) {
-- dev_err(&pdev->dev, "Failed to build groups\n");
-- return err;
-- }
--
-- /* Setup functions descriptions per SoC types */
-- err = mtk_build_functions(hw);
-- if (err) {
-- dev_err(&pdev->dev, "Failed to build functions\n");
-- return err;
-- }
--
-- /* For able to make pinctrl_claim_hogs, we must not enable pinctrl
-- * until all groups and functions are being added one.
-- */
-- err = pinctrl_enable(hw->pctrl);
-- if (err)
-- return err;
--
-- err = mtk_build_eint(hw, pdev);
-- if (err)
-- dev_warn(&pdev->dev,
-- "Failed to add EINT, but pinctrl still can work\n");
--
-- /* Build gpiochip should be after pinctrl_enable is done */
-- err = mtk_build_gpiochip(hw, pdev->dev.of_node);
-- if (err) {
-- dev_err(&pdev->dev, "Failed to add gpio_chip\n");
-- return err;
-- }
--
-- platform_set_drvdata(pdev, hw);
--
-- return 0;
-+ return mtk_moore_pinctrl_probe(pdev, &mt7622_data);
- }
-
--static struct platform_driver mtk_pinctrl_driver = {
-+static struct platform_driver mt7622_pinctrl_driver = {
- .driver = {
-- .name = "mtk-pinctrl",
-- .of_match_table = mtk_pinctrl_of_match,
-+ .name = "mt7622-pinctrl",
-+ .of_match_table = mt7622_pinctrl_of_match,
- },
-- .probe = mtk_pinctrl_probe,
-+ .probe = mt7622_pinctrl_probe,
- };
-
--static int __init mtk_pinctrl_init(void)
-+static int __init mt7622_pinctrl_init(void)
- {
-- return platform_driver_register(&mtk_pinctrl_driver);
-+ return platform_driver_register(&mt7622_pinctrl_driver);
- }
--arch_initcall(mtk_pinctrl_init);
-+arch_initcall(mt7622_pinctrl_init);
---- /dev/null
-+++ b/drivers/pinctrl/mediatek/pinctrl-mt7623.c
-@@ -0,0 +1,1441 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * The MT7623 driver based on Linux generic pinctrl binding.
-+ *
-+ * Copyright (C) 2015 - 2018 MediaTek Inc.
-+ * Author: Biao Huang <biao.huang@mediatek.com>
-+ * Ryder Lee <ryder.lee@mediatek.com>
-+ * Sean Wang <sean.wang@mediatek.com>
-+ */
-+
-+#include "pinctrl-moore.h"
-+
-+#define PIN_BOND_REG0 0xb10
-+#define PIN_BOND_REG1 0xf20
-+#define PIN_BOND_REG2 0xef0
-+#define BOND_PCIE_CLR (0x77 << 3)
-+#define BOND_I2S_CLR 0x3
-+#define BOND_MSDC0E_CLR 0x1
-+
-+#define PIN_FIELD15(_s_pin, _e_pin, _s_addr, _x_addrs, _s_bit, _x_bits) \
-+ PIN_FIELD_CALC(_s_pin, _e_pin, 0, _s_addr, _x_addrs, _s_bit, \
-+ _x_bits, 15, false)
-+
-+#define PIN_FIELD16(_s_pin, _e_pin, _s_addr, _x_addrs, _s_bit, _x_bits) \
-+ PIN_FIELD_CALC(_s_pin, _e_pin, 0, _s_addr, _x_addrs, _s_bit, \
-+ _x_bits, 16, 0)
-+
-+#define PINS_FIELD16(_s_pin, _e_pin, _s_addr, _x_addrs, _s_bit, _x_bits) \
-+ PIN_FIELD_CALC(_s_pin, _e_pin, 0, _s_addr, _x_addrs, _s_bit, \
-+ _x_bits, 16, 1)
-+
-+#define MT7623_PIN(_number, _name, _eint_n, _drv_grp) \
-+ MTK_PIN(_number, _name, 0, _eint_n, _drv_grp)
-+
-+static const struct mtk_pin_field_calc mt7623_pin_mode_range[] = {
-+ PIN_FIELD15(0, 278, 0x760, 0x10, 0, 3),
-+};
-+
-+static const struct mtk_pin_field_calc mt7623_pin_dir_range[] = {
-+ PIN_FIELD16(0, 175, 0x0, 0x10, 0, 1),
-+ PIN_FIELD16(176, 278, 0xc0, 0x10, 0, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt7623_pin_di_range[] = {
-+ PIN_FIELD16(0, 278, 0x630, 0x10, 0, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt7623_pin_do_range[] = {
-+ PIN_FIELD16(0, 278, 0x500, 0x10, 0, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt7623_pin_ies_range[] = {
-+ PINS_FIELD16(0, 6, 0xb20, 0x10, 0, 1),
-+ PINS_FIELD16(7, 9, 0xb20, 0x10, 1, 1),
-+ PINS_FIELD16(10, 13, 0xb30, 0x10, 3, 1),
-+ PINS_FIELD16(14, 15, 0xb30, 0x10, 13, 1),
-+ PINS_FIELD16(16, 17, 0xb40, 0x10, 7, 1),
-+ PINS_FIELD16(18, 29, 0xb40, 0x10, 13, 1),
-+ PINS_FIELD16(30, 32, 0xb40, 0x10, 7, 1),
-+ PINS_FIELD16(33, 37, 0xb40, 0x10, 13, 1),
-+ PIN_FIELD16(38, 38, 0xb20, 0x10, 13, 1),
-+ PINS_FIELD16(39, 42, 0xb40, 0x10, 13, 1),
-+ PINS_FIELD16(43, 45, 0xb20, 0x10, 10, 1),
-+ PINS_FIELD16(47, 48, 0xb20, 0x10, 11, 1),
-+ PIN_FIELD16(49, 49, 0xb20, 0x10, 12, 1),
-+ PINS_FIELD16(50, 52, 0xb20, 0x10, 13, 1),
-+ PINS_FIELD16(53, 56, 0xb20, 0x10, 14, 1),
-+ PINS_FIELD16(57, 58, 0xb20, 0x10, 15, 1),
-+ PIN_FIELD16(59, 59, 0xb30, 0x10, 10, 1),
-+ PINS_FIELD16(60, 62, 0xb30, 0x10, 0, 1),
-+ PINS_FIELD16(63, 65, 0xb30, 0x10, 1, 1),
-+ PINS_FIELD16(66, 71, 0xb30, 0x10, 2, 1),
-+ PINS_FIELD16(72, 74, 0xb20, 0x10, 12, 1),
-+ PINS_FIELD16(75, 76, 0xb30, 0x10, 3, 1),
-+ PINS_FIELD16(77, 78, 0xb30, 0x10, 4, 1),
-+ PINS_FIELD16(79, 82, 0xb30, 0x10, 5, 1),
-+ PINS_FIELD16(83, 84, 0xb30, 0x10, 2, 1),
-+ PIN_FIELD16(85, 85, 0xda0, 0x10, 4, 1),
-+ PIN_FIELD16(86, 86, 0xd90, 0x10, 4, 1),
-+ PINS_FIELD16(87, 90, 0xdb0, 0x10, 4, 1),
-+ PINS_FIELD16(101, 104, 0xb30, 0x10, 6, 1),
-+ PIN_FIELD16(105, 105, 0xd40, 0x10, 4, 1),
-+ PIN_FIELD16(106, 106, 0xd30, 0x10, 4, 1),
-+ PINS_FIELD16(107, 110, 0xd50, 0x10, 4, 1),
-+ PINS_FIELD16(111, 115, 0xce0, 0x10, 4, 1),
-+ PIN_FIELD16(116, 116, 0xcd0, 0x10, 4, 1),
-+ PIN_FIELD16(117, 117, 0xcc0, 0x10, 4, 1),
-+ PINS_FIELD16(118, 121, 0xce0, 0x10, 4, 1),
-+ PINS_FIELD16(122, 125, 0xb30, 0x10, 7, 1),
-+ PIN_FIELD16(126, 126, 0xb20, 0x10, 12, 1),
-+ PINS_FIELD16(127, 142, 0xb30, 0x10, 9, 1),
-+ PINS_FIELD16(143, 160, 0xb30, 0x10, 10, 1),
-+ PINS_FIELD16(161, 168, 0xb30, 0x10, 12, 1),
-+ PINS_FIELD16(169, 183, 0xb30, 0x10, 10, 1),
-+ PINS_FIELD16(184, 186, 0xb30, 0x10, 9, 1),
-+ PIN_FIELD16(187, 187, 0xb30, 0x10, 14, 1),
-+ PIN_FIELD16(188, 188, 0xb20, 0x10, 13, 1),
-+ PINS_FIELD16(189, 193, 0xb30, 0x10, 15, 1),
-+ PINS_FIELD16(194, 198, 0xb40, 0x10, 0, 1),
-+ PIN_FIELD16(199, 199, 0xb20, 0x10, 1, 1),
-+ PINS_FIELD16(200, 202, 0xb40, 0x10, 1, 1),
-+ PINS_FIELD16(203, 207, 0xb40, 0x10, 2, 1),
-+ PINS_FIELD16(208, 209, 0xb40, 0x10, 3, 1),
-+ PIN_FIELD16(210, 210, 0xb40, 0x10, 4, 1),
-+ PINS_FIELD16(211, 235, 0xb40, 0x10, 5, 1),
-+ PINS_FIELD16(236, 241, 0xb40, 0x10, 6, 1),
-+ PINS_FIELD16(242, 243, 0xb40, 0x10, 7, 1),
-+ PINS_FIELD16(244, 247, 0xb40, 0x10, 8, 1),
-+ PIN_FIELD16(248, 248, 0xb40, 0x10, 9, 1),
-+ PINS_FIELD16(249, 257, 0xfc0, 0x10, 4, 1),
-+ PIN_FIELD16(258, 258, 0xcb0, 0x10, 4, 1),
-+ PIN_FIELD16(259, 259, 0xc90, 0x10, 4, 1),
-+ PIN_FIELD16(260, 260, 0x3a0, 0x10, 4, 1),
-+ PIN_FIELD16(261, 261, 0xd50, 0x10, 4, 1),
-+ PINS_FIELD16(262, 277, 0xb40, 0x10, 12, 1),
-+ PIN_FIELD16(278, 278, 0xb40, 0x10, 13, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt7623_pin_smt_range[] = {
-+ PINS_FIELD16(0, 6, 0xb50, 0x10, 0, 1),
-+ PINS_FIELD16(7, 9, 0xb50, 0x10, 1, 1),
-+ PINS_FIELD16(10, 13, 0xb60, 0x10, 3, 1),
-+ PINS_FIELD16(14, 15, 0xb60, 0x10, 13, 1),
-+ PINS_FIELD16(16, 17, 0xb70, 0x10, 7, 1),
-+ PINS_FIELD16(18, 29, 0xb70, 0x10, 13, 1),
-+ PINS_FIELD16(30, 32, 0xb70, 0x10, 7, 1),
-+ PINS_FIELD16(33, 37, 0xb70, 0x10, 13, 1),
-+ PIN_FIELD16(38, 38, 0xb50, 0x10, 13, 1),
-+ PINS_FIELD16(39, 42, 0xb70, 0x10, 13, 1),
-+ PINS_FIELD16(43, 45, 0xb50, 0x10, 10, 1),
-+ PINS_FIELD16(47, 48, 0xb50, 0x10, 11, 1),
-+ PIN_FIELD16(49, 49, 0xb50, 0x10, 12, 1),
-+ PINS_FIELD16(50, 52, 0xb50, 0x10, 13, 1),
-+ PINS_FIELD16(53, 56, 0xb50, 0x10, 14, 1),
-+ PINS_FIELD16(57, 58, 0xb50, 0x10, 15, 1),
-+ PIN_FIELD16(59, 59, 0xb60, 0x10, 10, 1),
-+ PINS_FIELD16(60, 62, 0xb60, 0x10, 0, 1),
-+ PINS_FIELD16(63, 65, 0xb60, 0x10, 1, 1),
-+ PINS_FIELD16(66, 71, 0xb60, 0x10, 2, 1),
-+ PINS_FIELD16(72, 74, 0xb50, 0x10, 12, 1),
-+ PINS_FIELD16(75, 76, 0xb60, 0x10, 3, 1),
-+ PINS_FIELD16(77, 78, 0xb60, 0x10, 4, 1),
-+ PINS_FIELD16(79, 82, 0xb60, 0x10, 5, 1),
-+ PINS_FIELD16(83, 84, 0xb60, 0x10, 2, 1),
-+ PIN_FIELD16(85, 85, 0xda0, 0x10, 11, 1),
-+ PIN_FIELD16(86, 86, 0xd90, 0x10, 11, 1),
-+ PIN_FIELD16(87, 87, 0xdc0, 0x10, 3, 1),
-+ PIN_FIELD16(88, 88, 0xdc0, 0x10, 7, 1),
-+ PIN_FIELD16(89, 89, 0xdc0, 0x10, 11, 1),
-+ PIN_FIELD16(90, 90, 0xdc0, 0x10, 15, 1),
-+ PINS_FIELD16(101, 104, 0xb60, 0x10, 6, 1),
-+ PIN_FIELD16(105, 105, 0xd40, 0x10, 11, 1),
-+ PIN_FIELD16(106, 106, 0xd30, 0x10, 11, 1),
-+ PIN_FIELD16(107, 107, 0xd60, 0x10, 3, 1),
-+ PIN_FIELD16(108, 108, 0xd60, 0x10, 7, 1),
-+ PIN_FIELD16(109, 109, 0xd60, 0x10, 11, 1),
-+ PIN_FIELD16(110, 110, 0xd60, 0x10, 15, 1),
-+ PIN_FIELD16(111, 111, 0xd00, 0x10, 15, 1),
-+ PIN_FIELD16(112, 112, 0xd00, 0x10, 11, 1),
-+ PIN_FIELD16(113, 113, 0xd00, 0x10, 7, 1),
-+ PIN_FIELD16(114, 114, 0xd00, 0x10, 3, 1),
-+ PIN_FIELD16(115, 115, 0xd10, 0x10, 3, 1),
-+ PIN_FIELD16(116, 116, 0xcd0, 0x10, 11, 1),
-+ PIN_FIELD16(117, 117, 0xcc0, 0x10, 11, 1),
-+ PIN_FIELD16(118, 118, 0xcf0, 0x10, 15, 1),
-+ PIN_FIELD16(119, 119, 0xcf0, 0x10, 7, 1),
-+ PIN_FIELD16(120, 120, 0xcf0, 0x10, 3, 1),
-+ PIN_FIELD16(121, 121, 0xcf0, 0x10, 7, 1),
-+ PINS_FIELD16(122, 125, 0xb60, 0x10, 7, 1),
-+ PIN_FIELD16(126, 126, 0xb50, 0x10, 12, 1),
-+ PINS_FIELD16(127, 142, 0xb60, 0x10, 9, 1),
-+ PINS_FIELD16(143, 160, 0xb60, 0x10, 10, 1),
-+ PINS_FIELD16(161, 168, 0xb60, 0x10, 12, 1),
-+ PINS_FIELD16(169, 183, 0xb60, 0x10, 10, 1),
-+ PINS_FIELD16(184, 186, 0xb60, 0x10, 9, 1),
-+ PIN_FIELD16(187, 187, 0xb60, 0x10, 14, 1),
-+ PIN_FIELD16(188, 188, 0xb50, 0x10, 13, 1),
-+ PINS_FIELD16(189, 193, 0xb60, 0x10, 15, 1),
-+ PINS_FIELD16(194, 198, 0xb70, 0x10, 0, 1),
-+ PIN_FIELD16(199, 199, 0xb50, 0x10, 1, 1),
-+ PINS_FIELD16(200, 202, 0xb70, 0x10, 1, 1),
-+ PINS_FIELD16(203, 207, 0xb70, 0x10, 2, 1),
-+ PINS_FIELD16(208, 209, 0xb70, 0x10, 3, 1),
-+ PIN_FIELD16(210, 210, 0xb70, 0x10, 4, 1),
-+ PINS_FIELD16(211, 235, 0xb70, 0x10, 5, 1),
-+ PINS_FIELD16(236, 241, 0xb70, 0x10, 6, 1),
-+ PINS_FIELD16(242, 243, 0xb70, 0x10, 7, 1),
-+ PINS_FIELD16(244, 247, 0xb70, 0x10, 8, 1),
-+ PIN_FIELD16(248, 248, 0xb70, 0x10, 9, 10),
-+ PIN_FIELD16(249, 249, 0x140, 0x10, 3, 1),
-+ PIN_FIELD16(250, 250, 0x130, 0x10, 15, 1),
-+ PIN_FIELD16(251, 251, 0x130, 0x10, 11, 1),
-+ PIN_FIELD16(252, 252, 0x130, 0x10, 7, 1),
-+ PIN_FIELD16(253, 253, 0x130, 0x10, 3, 1),
-+ PIN_FIELD16(254, 254, 0xf40, 0x10, 15, 1),
-+ PIN_FIELD16(255, 255, 0xf40, 0x10, 11, 1),
-+ PIN_FIELD16(256, 256, 0xf40, 0x10, 7, 1),
-+ PIN_FIELD16(257, 257, 0xf40, 0x10, 3, 1),
-+ PIN_FIELD16(258, 258, 0xcb0, 0x10, 11, 1),
-+ PIN_FIELD16(259, 259, 0xc90, 0x10, 11, 1),
-+ PIN_FIELD16(260, 260, 0x3a0, 0x10, 11, 1),
-+ PIN_FIELD16(261, 261, 0x0b0, 0x10, 3, 1),
-+ PINS_FIELD16(262, 277, 0xb70, 0x10, 12, 1),
-+ PIN_FIELD16(278, 278, 0xb70, 0x10, 13, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt7623_pin_pullen_range[] = {
-+ PIN_FIELD16(0, 278, 0x150, 0x10, 0, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt7623_pin_pullsel_range[] = {
-+ PIN_FIELD16(0, 278, 0x280, 0x10, 0, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt7623_pin_drv_range[] = {
-+ PINS_FIELD16(0, 6, 0xf50, 0x10, 0, 4),
-+ PINS_FIELD16(7, 9, 0xf50, 0x10, 4, 4),
-+ PINS_FIELD16(10, 13, 0xf50, 0x10, 4, 4),
-+ PINS_FIELD16(14, 15, 0xf50, 0x10, 12, 4),
-+ PINS_FIELD16(16, 17, 0xf60, 0x10, 0, 4),
-+ PINS_FIELD16(18, 21, 0xf60, 0x10, 0, 4),
-+ PINS_FIELD16(22, 26, 0xf60, 0x10, 8, 4),
-+ PINS_FIELD16(27, 29, 0xf60, 0x10, 12, 4),
-+ PINS_FIELD16(30, 32, 0xf60, 0x10, 0, 4),
-+ PINS_FIELD16(33, 37, 0xf70, 0x10, 0, 4),
-+ PIN_FIELD16(38, 38, 0xf70, 0x10, 4, 4),
-+ PINS_FIELD16(39, 42, 0xf70, 0x10, 8, 4),
-+ PINS_FIELD16(43, 45, 0xf70, 0x10, 12, 4),
-+ PINS_FIELD16(47, 48, 0xf80, 0x10, 0, 4),
-+ PIN_FIELD16(49, 49, 0xf80, 0x10, 4, 4),
-+ PINS_FIELD16(50, 52, 0xf70, 0x10, 4, 4),
-+ PINS_FIELD16(53, 56, 0xf80, 0x10, 12, 4),
-+ PINS_FIELD16(60, 62, 0xf90, 0x10, 8, 4),
-+ PINS_FIELD16(63, 65, 0xf90, 0x10, 12, 4),
-+ PINS_FIELD16(66, 71, 0xfa0, 0x10, 0, 4),
-+ PINS_FIELD16(72, 74, 0xf80, 0x10, 4, 4),
-+ PIN_FIELD16(85, 85, 0xda0, 0x10, 0, 4),
-+ PIN_FIELD16(86, 86, 0xd90, 0x10, 0, 4),
-+ PINS_FIELD16(87, 90, 0xdb0, 0x10, 0, 4),
-+ PIN_FIELD16(105, 105, 0xd40, 0x10, 0, 4),
-+ PIN_FIELD16(106, 106, 0xd30, 0x10, 0, 4),
-+ PINS_FIELD16(107, 110, 0xd50, 0x10, 0, 4),
-+ PINS_FIELD16(111, 115, 0xce0, 0x10, 0, 4),
-+ PIN_FIELD16(116, 116, 0xcd0, 0x10, 0, 4),
-+ PIN_FIELD16(117, 117, 0xcc0, 0x10, 0, 4),
-+ PINS_FIELD16(118, 121, 0xce0, 0x10, 0, 4),
-+ PIN_FIELD16(126, 126, 0xf80, 0x10, 4, 4),
-+ PIN_FIELD16(188, 188, 0xf70, 0x10, 4, 4),
-+ PINS_FIELD16(189, 193, 0xfe0, 0x10, 8, 4),
-+ PINS_FIELD16(194, 198, 0xfe0, 0x10, 12, 4),
-+ PIN_FIELD16(199, 199, 0xf50, 0x10, 4, 4),
-+ PINS_FIELD16(200, 202, 0xfd0, 0x10, 0, 4),
-+ PINS_FIELD16(203, 207, 0xfd0, 0x10, 4, 4),
-+ PINS_FIELD16(208, 209, 0xfd0, 0x10, 8, 4),
-+ PIN_FIELD16(210, 210, 0xfd0, 0x10, 12, 4),
-+ PINS_FIELD16(211, 235, 0xff0, 0x10, 0, 4),
-+ PINS_FIELD16(236, 241, 0xff0, 0x10, 4, 4),
-+ PINS_FIELD16(242, 243, 0xff0, 0x10, 8, 4),
-+ PIN_FIELD16(248, 248, 0xf00, 0x10, 0, 4),
-+ PINS_FIELD16(249, 256, 0xfc0, 0x10, 0, 4),
-+ PIN_FIELD16(257, 257, 0xce0, 0x10, 0, 4),
-+ PIN_FIELD16(258, 258, 0xcb0, 0x10, 0, 4),
-+ PIN_FIELD16(259, 259, 0xc90, 0x10, 0, 4),
-+ PIN_FIELD16(260, 260, 0x3a0, 0x10, 0, 4),
-+ PIN_FIELD16(261, 261, 0xd50, 0x10, 0, 4),
-+ PINS_FIELD16(262, 277, 0xf00, 0x10, 8, 4),
-+ PIN_FIELD16(278, 278, 0xf70, 0x10, 8, 4),
-+};
-+
-+static const struct mtk_pin_field_calc mt7623_pin_tdsel_range[] = {
-+ PINS_FIELD16(262, 276, 0x4c0, 0x10, 0, 4),
-+};
-+
-+static const struct mtk_pin_field_calc mt7623_pin_pupd_range[] = {
-+ /* MSDC0 */
-+ PIN_FIELD16(111, 111, 0xd00, 0x10, 12, 1),
-+ PIN_FIELD16(112, 112, 0xd00, 0x10, 8, 1),
-+ PIN_FIELD16(113, 113, 0xd00, 0x10, 4, 1),
-+ PIN_FIELD16(114, 114, 0xd00, 0x10, 0, 1),
-+ PIN_FIELD16(115, 115, 0xd10, 0x10, 0, 1),
-+ PIN_FIELD16(116, 116, 0xcd0, 0x10, 8, 1),
-+ PIN_FIELD16(117, 117, 0xcc0, 0x10, 8, 1),
-+ PIN_FIELD16(118, 118, 0xcf0, 0x10, 12, 1),
-+ PIN_FIELD16(119, 119, 0xcf0, 0x10, 8, 1),
-+ PIN_FIELD16(120, 120, 0xcf0, 0x10, 4, 1),
-+ PIN_FIELD16(121, 121, 0xcf0, 0x10, 0, 1),
-+ /* MSDC1 */
-+ PIN_FIELD16(105, 105, 0xd40, 0x10, 8, 1),
-+ PIN_FIELD16(106, 106, 0xd30, 0x10, 8, 1),
-+ PIN_FIELD16(107, 107, 0xd60, 0x10, 0, 1),
-+ PIN_FIELD16(108, 108, 0xd60, 0x10, 10, 1),
-+ PIN_FIELD16(109, 109, 0xd60, 0x10, 4, 1),
-+ PIN_FIELD16(110, 110, 0xc60, 0x10, 12, 1),
-+ /* MSDC1 */
-+ PIN_FIELD16(85, 85, 0xda0, 0x10, 8, 1),
-+ PIN_FIELD16(86, 86, 0xd90, 0x10, 8, 1),
-+ PIN_FIELD16(87, 87, 0xdc0, 0x10, 0, 1),
-+ PIN_FIELD16(88, 88, 0xdc0, 0x10, 10, 1),
-+ PIN_FIELD16(89, 89, 0xdc0, 0x10, 4, 1),
-+ PIN_FIELD16(90, 90, 0xdc0, 0x10, 12, 1),
-+ /* MSDC0E */
-+ PIN_FIELD16(249, 249, 0x140, 0x10, 0, 1),
-+ PIN_FIELD16(250, 250, 0x130, 0x10, 12, 1),
-+ PIN_FIELD16(251, 251, 0x130, 0x10, 8, 1),
-+ PIN_FIELD16(252, 252, 0x130, 0x10, 4, 1),
-+ PIN_FIELD16(253, 253, 0x130, 0x10, 0, 1),
-+ PIN_FIELD16(254, 254, 0xf40, 0x10, 12, 1),
-+ PIN_FIELD16(255, 255, 0xf40, 0x10, 8, 1),
-+ PIN_FIELD16(256, 256, 0xf40, 0x10, 4, 1),
-+ PIN_FIELD16(257, 257, 0xf40, 0x10, 0, 1),
-+ PIN_FIELD16(258, 258, 0xcb0, 0x10, 8, 1),
-+ PIN_FIELD16(259, 259, 0xc90, 0x10, 8, 1),
-+ PIN_FIELD16(261, 261, 0x140, 0x10, 8, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt7623_pin_r1_range[] = {
-+ /* MSDC0 */
-+ PIN_FIELD16(111, 111, 0xd00, 0x10, 13, 1),
-+ PIN_FIELD16(112, 112, 0xd00, 0x10, 9, 1),
-+ PIN_FIELD16(113, 113, 0xd00, 0x10, 5, 1),
-+ PIN_FIELD16(114, 114, 0xd00, 0x10, 1, 1),
-+ PIN_FIELD16(115, 115, 0xd10, 0x10, 1, 1),
-+ PIN_FIELD16(116, 116, 0xcd0, 0x10, 9, 1),
-+ PIN_FIELD16(117, 117, 0xcc0, 0x10, 9, 1),
-+ PIN_FIELD16(118, 118, 0xcf0, 0x10, 13, 1),
-+ PIN_FIELD16(119, 119, 0xcf0, 0x10, 9, 1),
-+ PIN_FIELD16(120, 120, 0xcf0, 0x10, 5, 1),
-+ PIN_FIELD16(121, 121, 0xcf0, 0x10, 1, 1),
-+ /* MSDC1 */
-+ PIN_FIELD16(105, 105, 0xd40, 0x10, 9, 1),
-+ PIN_FIELD16(106, 106, 0xd30, 0x10, 9, 1),
-+ PIN_FIELD16(107, 107, 0xd60, 0x10, 1, 1),
-+ PIN_FIELD16(108, 108, 0xd60, 0x10, 9, 1),
-+ PIN_FIELD16(109, 109, 0xd60, 0x10, 5, 1),
-+ PIN_FIELD16(110, 110, 0xc60, 0x10, 13, 1),
-+ /* MSDC2 */
-+ PIN_FIELD16(85, 85, 0xda0, 0x10, 9, 1),
-+ PIN_FIELD16(86, 86, 0xd90, 0x10, 9, 1),
-+ PIN_FIELD16(87, 87, 0xdc0, 0x10, 1, 1),
-+ PIN_FIELD16(88, 88, 0xdc0, 0x10, 9, 1),
-+ PIN_FIELD16(89, 89, 0xdc0, 0x10, 5, 1),
-+ PIN_FIELD16(90, 90, 0xdc0, 0x10, 13, 1),
-+ /* MSDC0E */
-+ PIN_FIELD16(249, 249, 0x140, 0x10, 1, 1),
-+ PIN_FIELD16(250, 250, 0x130, 0x10, 13, 1),
-+ PIN_FIELD16(251, 251, 0x130, 0x10, 9, 1),
-+ PIN_FIELD16(252, 252, 0x130, 0x10, 5, 1),
-+ PIN_FIELD16(253, 253, 0x130, 0x10, 1, 1),
-+ PIN_FIELD16(254, 254, 0xf40, 0x10, 13, 1),
-+ PIN_FIELD16(255, 255, 0xf40, 0x10, 9, 1),
-+ PIN_FIELD16(256, 256, 0xf40, 0x10, 5, 1),
-+ PIN_FIELD16(257, 257, 0xf40, 0x10, 1, 1),
-+ PIN_FIELD16(258, 258, 0xcb0, 0x10, 9, 1),
-+ PIN_FIELD16(259, 259, 0xc90, 0x10, 9, 1),
-+ PIN_FIELD16(261, 261, 0x140, 0x10, 9, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt7623_pin_r0_range[] = {
-+ /* MSDC0 */
-+ PIN_FIELD16(111, 111, 0xd00, 0x10, 14, 1),
-+ PIN_FIELD16(112, 112, 0xd00, 0x10, 10, 1),
-+ PIN_FIELD16(113, 113, 0xd00, 0x10, 6, 1),
-+ PIN_FIELD16(114, 114, 0xd00, 0x10, 2, 1),
-+ PIN_FIELD16(115, 115, 0xd10, 0x10, 2, 1),
-+ PIN_FIELD16(116, 116, 0xcd0, 0x10, 10, 1),
-+ PIN_FIELD16(117, 117, 0xcc0, 0x10, 10, 1),
-+ PIN_FIELD16(118, 118, 0xcf0, 0x10, 14, 1),
-+ PIN_FIELD16(119, 119, 0xcf0, 0x10, 10, 1),
-+ PIN_FIELD16(120, 120, 0xcf0, 0x10, 6, 1),
-+ PIN_FIELD16(121, 121, 0xcf0, 0x10, 2, 1),
-+ /* MSDC1 */
-+ PIN_FIELD16(105, 105, 0xd40, 0x10, 10, 1),
-+ PIN_FIELD16(106, 106, 0xd30, 0x10, 10, 1),
-+ PIN_FIELD16(107, 107, 0xd60, 0x10, 2, 1),
-+ PIN_FIELD16(108, 108, 0xd60, 0x10, 8, 1),
-+ PIN_FIELD16(109, 109, 0xd60, 0x10, 6, 1),
-+ PIN_FIELD16(110, 110, 0xc60, 0x10, 14, 1),
-+ /* MSDC2 */
-+ PIN_FIELD16(85, 85, 0xda0, 0x10, 10, 1),
-+ PIN_FIELD16(86, 86, 0xd90, 0x10, 10, 1),
-+ PIN_FIELD16(87, 87, 0xdc0, 0x10, 2, 1),
-+ PIN_FIELD16(88, 88, 0xdc0, 0x10, 8, 1),
-+ PIN_FIELD16(89, 89, 0xdc0, 0x10, 6, 1),
-+ PIN_FIELD16(90, 90, 0xdc0, 0x10, 14, 1),
-+ /* MSDC0E */
-+ PIN_FIELD16(249, 249, 0x140, 0x10, 2, 1),
-+ PIN_FIELD16(250, 250, 0x130, 0x10, 14, 1),
-+ PIN_FIELD16(251, 251, 0x130, 0x10, 10, 1),
-+ PIN_FIELD16(252, 252, 0x130, 0x10, 6, 1),
-+ PIN_FIELD16(253, 253, 0x130, 0x10, 2, 1),
-+ PIN_FIELD16(254, 254, 0xf40, 0x10, 14, 1),
-+ PIN_FIELD16(255, 255, 0xf40, 0x10, 10, 1),
-+ PIN_FIELD16(256, 256, 0xf40, 0x10, 6, 1),
-+ PIN_FIELD16(257, 257, 0xf40, 0x10, 5, 1),
-+ PIN_FIELD16(258, 258, 0xcb0, 0x10, 10, 1),
-+ PIN_FIELD16(259, 259, 0xc90, 0x10, 10, 1),
-+ PIN_FIELD16(261, 261, 0x140, 0x10, 10, 1),
-+};
-+
-+static const struct mtk_pin_reg_calc mt7623_reg_cals[] = {
-+ [PINCTRL_PIN_REG_MODE] = MTK_RANGE(mt7623_pin_mode_range),
-+ [PINCTRL_PIN_REG_DIR] = MTK_RANGE(mt7623_pin_dir_range),
-+ [PINCTRL_PIN_REG_DI] = MTK_RANGE(mt7623_pin_di_range),
-+ [PINCTRL_PIN_REG_DO] = MTK_RANGE(mt7623_pin_do_range),
-+ [PINCTRL_PIN_REG_SMT] = MTK_RANGE(mt7623_pin_smt_range),
-+ [PINCTRL_PIN_REG_PULLSEL] = MTK_RANGE(mt7623_pin_pullsel_range),
-+ [PINCTRL_PIN_REG_PULLEN] = MTK_RANGE(mt7623_pin_pullen_range),
-+ [PINCTRL_PIN_REG_DRV] = MTK_RANGE(mt7623_pin_drv_range),
-+ [PINCTRL_PIN_REG_TDSEL] = MTK_RANGE(mt7623_pin_tdsel_range),
-+ [PINCTRL_PIN_REG_IES] = MTK_RANGE(mt7623_pin_ies_range),
-+ [PINCTRL_PIN_REG_PUPD] = MTK_RANGE(mt7623_pin_pupd_range),
-+ [PINCTRL_PIN_REG_R0] = MTK_RANGE(mt7623_pin_r0_range),
-+ [PINCTRL_PIN_REG_R1] = MTK_RANGE(mt7623_pin_r1_range),
-+};
-+
-+static const struct mtk_pin_desc mt7623_pins[] = {
-+ MT7623_PIN(0, "PWRAP_SPI0_MI", 148, DRV_GRP3),
-+ MT7623_PIN(1, "PWRAP_SPI0_MO", 149, DRV_GRP3),
-+ MT7623_PIN(2, "PWRAP_INT", 150, DRV_GRP3),
-+ MT7623_PIN(3, "PWRAP_SPI0_CK", 151, DRV_GRP3),
-+ MT7623_PIN(4, "PWRAP_SPI0_CSN", 152, DRV_GRP3),
-+ MT7623_PIN(5, "PWRAP_SPI0_CK2", 153, DRV_GRP3),
-+ MT7623_PIN(6, "PWRAP_SPI0_CSN2", 154, DRV_GRP3),
-+ MT7623_PIN(7, "SPI1_CSN", 155, DRV_GRP3),
-+ MT7623_PIN(8, "SPI1_MI", 156, DRV_GRP3),
-+ MT7623_PIN(9, "SPI1_MO", 157, DRV_GRP3),
-+ MT7623_PIN(10, "RTC32K_CK", 158, DRV_GRP3),
-+ MT7623_PIN(11, "WATCHDOG", 159, DRV_GRP3),
-+ MT7623_PIN(12, "SRCLKENA", 160, DRV_GRP3),
-+ MT7623_PIN(13, "SRCLKENAI", 161, DRV_GRP3),
-+ MT7623_PIN(14, "URXD2", 162, DRV_GRP1),
-+ MT7623_PIN(15, "UTXD2", 163, DRV_GRP1),
-+ MT7623_PIN(16, "I2S5_DATA_IN", 164, DRV_GRP1),
-+ MT7623_PIN(17, "I2S5_BCK", 165, DRV_GRP1),
-+ MT7623_PIN(18, "PCM_CLK", 166, DRV_GRP1),
-+ MT7623_PIN(19, "PCM_SYNC", 167, DRV_GRP1),
-+ MT7623_PIN(20, "PCM_RX", EINT_NA, DRV_GRP1),
-+ MT7623_PIN(21, "PCM_TX", EINT_NA, DRV_GRP1),
-+ MT7623_PIN(22, "EINT0", 0, DRV_GRP1),
-+ MT7623_PIN(23, "EINT1", 1, DRV_GRP1),
-+ MT7623_PIN(24, "EINT2", 2, DRV_GRP1),
-+ MT7623_PIN(25, "EINT3", 3, DRV_GRP1),
-+ MT7623_PIN(26, "EINT4", 4, DRV_GRP1),
-+ MT7623_PIN(27, "EINT5", 5, DRV_GRP1),
-+ MT7623_PIN(28, "EINT6", 6, DRV_GRP1),
-+ MT7623_PIN(29, "EINT7", 7, DRV_GRP1),
-+ MT7623_PIN(30, "I2S5_LRCK", 12, DRV_GRP1),
-+ MT7623_PIN(31, "I2S5_MCLK", 13, DRV_GRP1),
-+ MT7623_PIN(32, "I2S5_DATA", 14, DRV_GRP1),
-+ MT7623_PIN(33, "I2S1_DATA", 15, DRV_GRP1),
-+ MT7623_PIN(34, "I2S1_DATA_IN", 16, DRV_GRP1),
-+ MT7623_PIN(35, "I2S1_BCK", 17, DRV_GRP1),
-+ MT7623_PIN(36, "I2S1_LRCK", 18, DRV_GRP1),
-+ MT7623_PIN(37, "I2S1_MCLK", 19, DRV_GRP1),
-+ MT7623_PIN(38, "I2S2_DATA", 20, DRV_GRP1),
-+ MT7623_PIN(39, "JTMS", 21, DRV_GRP3),
-+ MT7623_PIN(40, "JTCK", 22, DRV_GRP3),
-+ MT7623_PIN(41, "JTDI", 23, DRV_GRP3),
-+ MT7623_PIN(42, "JTDO", 24, DRV_GRP3),
-+ MT7623_PIN(43, "NCLE", 25, DRV_GRP1),
-+ MT7623_PIN(44, "NCEB1", 26, DRV_GRP1),
-+ MT7623_PIN(45, "NCEB0", 27, DRV_GRP1),
-+ MT7623_PIN(46, "IR", 28, DRV_FIXED),
-+ MT7623_PIN(47, "NREB", 29, DRV_GRP1),
-+ MT7623_PIN(48, "NRNB", 30, DRV_GRP1),
-+ MT7623_PIN(49, "I2S0_DATA", 31, DRV_GRP1),
-+ MT7623_PIN(50, "I2S2_BCK", 32, DRV_GRP1),
-+ MT7623_PIN(51, "I2S2_DATA_IN", 33, DRV_GRP1),
-+ MT7623_PIN(52, "I2S2_LRCK", 34, DRV_GRP1),
-+ MT7623_PIN(53, "SPI0_CSN", 35, DRV_GRP1),
-+ MT7623_PIN(54, "SPI0_CK", 36, DRV_GRP1),
-+ MT7623_PIN(55, "SPI0_MI", 37, DRV_GRP1),
-+ MT7623_PIN(56, "SPI0_MO", 38, DRV_GRP1),
-+ MT7623_PIN(57, "SDA1", 39, DRV_FIXED),
-+ MT7623_PIN(58, "SCL1", 40, DRV_FIXED),
-+ MT7623_PIN(59, "RAMBUF_I_CLK", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(60, "WB_RSTB", 41, DRV_GRP3),
-+ MT7623_PIN(61, "F2W_DATA", 42, DRV_GRP3),
-+ MT7623_PIN(62, "F2W_CLK", 43, DRV_GRP3),
-+ MT7623_PIN(63, "WB_SCLK", 44, DRV_GRP3),
-+ MT7623_PIN(64, "WB_SDATA", 45, DRV_GRP3),
-+ MT7623_PIN(65, "WB_SEN", 46, DRV_GRP3),
-+ MT7623_PIN(66, "WB_CRTL0", 47, DRV_GRP3),
-+ MT7623_PIN(67, "WB_CRTL1", 48, DRV_GRP3),
-+ MT7623_PIN(68, "WB_CRTL2", 49, DRV_GRP3),
-+ MT7623_PIN(69, "WB_CRTL3", 50, DRV_GRP3),
-+ MT7623_PIN(70, "WB_CRTL4", 51, DRV_GRP3),
-+ MT7623_PIN(71, "WB_CRTL5", 52, DRV_GRP3),
-+ MT7623_PIN(72, "I2S0_DATA_IN", 53, DRV_GRP1),
-+ MT7623_PIN(73, "I2S0_LRCK", 54, DRV_GRP1),
-+ MT7623_PIN(74, "I2S0_BCK", 55, DRV_GRP1),
-+ MT7623_PIN(75, "SDA0", 56, DRV_FIXED),
-+ MT7623_PIN(76, "SCL0", 57, DRV_FIXED),
-+ MT7623_PIN(77, "SDA2", 58, DRV_FIXED),
-+ MT7623_PIN(78, "SCL2", 59, DRV_FIXED),
-+ MT7623_PIN(79, "URXD0", 60, DRV_FIXED),
-+ MT7623_PIN(80, "UTXD0", 61, DRV_FIXED),
-+ MT7623_PIN(81, "URXD1", 62, DRV_FIXED),
-+ MT7623_PIN(82, "UTXD1", 63, DRV_FIXED),
-+ MT7623_PIN(83, "LCM_RST", 64, DRV_FIXED),
-+ MT7623_PIN(84, "DSI_TE", 65, DRV_FIXED),
-+ MT7623_PIN(85, "MSDC2_CMD", 66, DRV_GRP4),
-+ MT7623_PIN(86, "MSDC2_CLK", 67, DRV_GRP4),
-+ MT7623_PIN(87, "MSDC2_DAT0", 68, DRV_GRP4),
-+ MT7623_PIN(88, "MSDC2_DAT1", 69, DRV_GRP4),
-+ MT7623_PIN(89, "MSDC2_DAT2", 70, DRV_GRP4),
-+ MT7623_PIN(90, "MSDC2_DAT3", 71, DRV_GRP4),
-+ MT7623_PIN(91, "TDN3", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(92, "TDP3", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(93, "TDN2", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(94, "TDP2", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(95, "TCN", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(96, "TCP", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(97, "TDN1", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(98, "TDP1", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(99, "TDN0", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(100, "TDP0", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(101, "SPI2_CSN", 74, DRV_FIXED),
-+ MT7623_PIN(102, "SPI2_MI", 75, DRV_FIXED),
-+ MT7623_PIN(103, "SPI2_MO", 76, DRV_FIXED),
-+ MT7623_PIN(104, "SPI2_CLK", 77, DRV_FIXED),
-+ MT7623_PIN(105, "MSDC1_CMD", 78, DRV_GRP4),
-+ MT7623_PIN(106, "MSDC1_CLK", 79, DRV_GRP4),
-+ MT7623_PIN(107, "MSDC1_DAT0", 80, DRV_GRP4),
-+ MT7623_PIN(108, "MSDC1_DAT1", 81, DRV_GRP4),
-+ MT7623_PIN(109, "MSDC1_DAT2", 82, DRV_GRP4),
-+ MT7623_PIN(110, "MSDC1_DAT3", 83, DRV_GRP4),
-+ MT7623_PIN(111, "MSDC0_DAT7", 84, DRV_GRP4),
-+ MT7623_PIN(112, "MSDC0_DAT6", 85, DRV_GRP4),
-+ MT7623_PIN(113, "MSDC0_DAT5", 86, DRV_GRP4),
-+ MT7623_PIN(114, "MSDC0_DAT4", 87, DRV_GRP4),
-+ MT7623_PIN(115, "MSDC0_RSTB", 88, DRV_GRP4),
-+ MT7623_PIN(116, "MSDC0_CMD", 89, DRV_GRP4),
-+ MT7623_PIN(117, "MSDC0_CLK", 90, DRV_GRP4),
-+ MT7623_PIN(118, "MSDC0_DAT3", 91, DRV_GRP4),
-+ MT7623_PIN(119, "MSDC0_DAT2", 92, DRV_GRP4),
-+ MT7623_PIN(120, "MSDC0_DAT1", 93, DRV_GRP4),
-+ MT7623_PIN(121, "MSDC0_DAT0", 94, DRV_GRP4),
-+ MT7623_PIN(122, "CEC", 95, DRV_FIXED),
-+ MT7623_PIN(123, "HTPLG", 96, DRV_FIXED),
-+ MT7623_PIN(124, "HDMISCK", 97, DRV_FIXED),
-+ MT7623_PIN(125, "HDMISD", 98, DRV_FIXED),
-+ MT7623_PIN(126, "I2S0_MCLK", 99, DRV_GRP1),
-+ MT7623_PIN(127, "RAMBUF_IDATA0", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(128, "RAMBUF_IDATA1", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(129, "RAMBUF_IDATA2", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(130, "RAMBUF_IDATA3", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(131, "RAMBUF_IDATA4", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(132, "RAMBUF_IDATA5", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(133, "RAMBUF_IDATA6", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(134, "RAMBUF_IDATA7", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(135, "RAMBUF_IDATA8", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(136, "RAMBUF_IDATA9", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(137, "RAMBUF_IDATA10", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(138, "RAMBUF_IDATA11", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(139, "RAMBUF_IDATA12", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(140, "RAMBUF_IDATA13", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(141, "RAMBUF_IDATA14", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(142, "RAMBUF_IDATA15", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(143, "RAMBUF_ODATA0", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(144, "RAMBUF_ODATA1", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(145, "RAMBUF_ODATA2", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(146, "RAMBUF_ODATA3", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(147, "RAMBUF_ODATA4", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(148, "RAMBUF_ODATA5", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(149, "RAMBUF_ODATA6", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(150, "RAMBUF_ODATA7", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(151, "RAMBUF_ODATA8", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(152, "RAMBUF_ODATA9", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(153, "RAMBUF_ODATA10", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(154, "RAMBUF_ODATA11", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(155, "RAMBUF_ODATA12", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(156, "RAMBUF_ODATA13", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(157, "RAMBUF_ODATA14", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(158, "RAMBUF_ODATA15", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(159, "RAMBUF_BE0", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(160, "RAMBUF_BE1", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(161, "AP2PT_INT", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(162, "AP2PT_INT_CLR", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(163, "PT2AP_INT", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(164, "PT2AP_INT_CLR", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(165, "AP2UP_INT", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(166, "AP2UP_INT_CLR", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(167, "UP2AP_INT", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(168, "UP2AP_INT_CLR", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(169, "RAMBUF_ADDR0", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(170, "RAMBUF_ADDR1", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(171, "RAMBUF_ADDR2", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(172, "RAMBUF_ADDR3", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(173, "RAMBUF_ADDR4", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(174, "RAMBUF_ADDR5", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(175, "RAMBUF_ADDR6", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(176, "RAMBUF_ADDR7", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(177, "RAMBUF_ADDR8", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(178, "RAMBUF_ADDR9", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(179, "RAMBUF_ADDR10", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(180, "RAMBUF_RW", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(181, "RAMBUF_LAST", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(182, "RAMBUF_HP", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(183, "RAMBUF_REQ", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(184, "RAMBUF_ALE", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(185, "RAMBUF_DLE", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(186, "RAMBUF_WDLE", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(187, "RAMBUF_O_CLK", EINT_NA, DRV_FIXED),
-+ MT7623_PIN(188, "I2S2_MCLK", 100, DRV_GRP1),
-+ MT7623_PIN(189, "I2S3_DATA", 101, DRV_GRP1),
-+ MT7623_PIN(190, "I2S3_DATA_IN", 102, DRV_GRP1),
-+ MT7623_PIN(191, "I2S3_BCK", 103, DRV_GRP1),
-+ MT7623_PIN(192, "I2S3_LRCK", 104, DRV_GRP1),
-+ MT7623_PIN(193, "I2S3_MCLK", 105, DRV_GRP1),
-+ MT7623_PIN(194, "I2S4_DATA", 106, DRV_GRP1),
-+ MT7623_PIN(195, "I2S4_DATA_IN", 107, DRV_GRP1),
-+ MT7623_PIN(196, "I2S4_BCK", 108, DRV_GRP1),
-+ MT7623_PIN(197, "I2S4_LRCK", 109, DRV_GRP1),
-+ MT7623_PIN(198, "I2S4_MCLK", 110, DRV_GRP1),
-+ MT7623_PIN(199, "SPI1_CLK", 111, DRV_GRP3),
-+ MT7623_PIN(200, "SPDIF_OUT", 112, DRV_GRP1),
-+ MT7623_PIN(201, "SPDIF_IN0", 113, DRV_GRP1),
-+ MT7623_PIN(202, "SPDIF_IN1", 114, DRV_GRP1),
-+ MT7623_PIN(203, "PWM0", 115, DRV_GRP1),
-+ MT7623_PIN(204, "PWM1", 116, DRV_GRP1),
-+ MT7623_PIN(205, "PWM2", 117, DRV_GRP1),
-+ MT7623_PIN(206, "PWM3", 118, DRV_GRP1),
-+ MT7623_PIN(207, "PWM4", 119, DRV_GRP1),
-+ MT7623_PIN(208, "AUD_EXT_CK1", 120, DRV_GRP1),
-+ MT7623_PIN(209, "AUD_EXT_CK2", 121, DRV_GRP1),
-+ MT7623_PIN(210, "AUD_CLOCK", EINT_NA, DRV_GRP3),
-+ MT7623_PIN(211, "DVP_RESET", EINT_NA, DRV_GRP3),
-+ MT7623_PIN(212, "DVP_CLOCK", EINT_NA, DRV_GRP3),
-+ MT7623_PIN(213, "DVP_CS", EINT_NA, DRV_GRP3),
-+ MT7623_PIN(214, "DVP_CK", EINT_NA, DRV_GRP3),
-+ MT7623_PIN(215, "DVP_DI", EINT_NA, DRV_GRP3),
-+ MT7623_PIN(216, "DVP_DO", EINT_NA, DRV_GRP3),
-+ MT7623_PIN(217, "AP_CS", EINT_NA, DRV_GRP3),
-+ MT7623_PIN(218, "AP_CK", EINT_NA, DRV_GRP3),
-+ MT7623_PIN(219, "AP_DI", EINT_NA, DRV_GRP3),
-+ MT7623_PIN(220, "AP_DO", EINT_NA, DRV_GRP3),
-+ MT7623_PIN(221, "DVD_BCLK", EINT_NA, DRV_GRP3),
-+ MT7623_PIN(222, "T8032_CLK", EINT_NA, DRV_GRP3),
-+ MT7623_PIN(223, "AP_BCLK", EINT_NA, DRV_GRP3),
-+ MT7623_PIN(224, "HOST_CS", EINT_NA, DRV_GRP3),
-+ MT7623_PIN(225, "HOST_CK", EINT_NA, DRV_GRP3),
-+ MT7623_PIN(226, "HOST_DO0", EINT_NA, DRV_GRP3),
-+ MT7623_PIN(227, "HOST_DO1", EINT_NA, DRV_GRP3),
-+ MT7623_PIN(228, "SLV_CS", EINT_NA, DRV_GRP3),
-+ MT7623_PIN(229, "SLV_CK", EINT_NA, DRV_GRP3),
-+ MT7623_PIN(230, "SLV_DI0", EINT_NA, DRV_GRP3),
-+ MT7623_PIN(231, "SLV_DI1", EINT_NA, DRV_GRP3),
-+ MT7623_PIN(232, "AP2DSP_INT", EINT_NA, DRV_GRP3),
-+ MT7623_PIN(233, "AP2DSP_INT_CLR", EINT_NA, DRV_GRP3),
-+ MT7623_PIN(234, "DSP2AP_INT", EINT_NA, DRV_GRP3),
-+ MT7623_PIN(235, "DSP2AP_INT_CLR", EINT_NA, DRV_GRP3),
-+ MT7623_PIN(236, "EXT_SDIO3", 122, DRV_GRP1),
-+ MT7623_PIN(237, "EXT_SDIO2", 123, DRV_GRP1),
-+ MT7623_PIN(238, "EXT_SDIO1", 124, DRV_GRP1),
-+ MT7623_PIN(239, "EXT_SDIO0", 125, DRV_GRP1),
-+ MT7623_PIN(240, "EXT_XCS", 126, DRV_GRP1),
-+ MT7623_PIN(241, "EXT_SCK", 127, DRV_GRP1),
-+ MT7623_PIN(242, "URTS2", 128, DRV_GRP1),
-+ MT7623_PIN(243, "UCTS2", 129, DRV_GRP1),
-+ MT7623_PIN(244, "HDMI_SDA_RX", 130, DRV_FIXED),
-+ MT7623_PIN(245, "HDMI_SCL_RX", 131, DRV_FIXED),
-+ MT7623_PIN(246, "MHL_SENCE", 132, DRV_FIXED),
-+ MT7623_PIN(247, "HDMI_HPD_CBUS_RX", 69, DRV_FIXED),
-+ MT7623_PIN(248, "HDMI_TESTOUTP_RX", 133, DRV_GRP1),
-+ MT7623_PIN(249, "MSDC0E_RSTB", 134, DRV_GRP4),
-+ MT7623_PIN(250, "MSDC0E_DAT7", 135, DRV_GRP4),
-+ MT7623_PIN(251, "MSDC0E_DAT6", 136, DRV_GRP4),
-+ MT7623_PIN(252, "MSDC0E_DAT5", 137, DRV_GRP4),
-+ MT7623_PIN(253, "MSDC0E_DAT4", 138, DRV_GRP4),
-+ MT7623_PIN(254, "MSDC0E_DAT3", 139, DRV_GRP4),
-+ MT7623_PIN(255, "MSDC0E_DAT2", 140, DRV_GRP4),
-+ MT7623_PIN(256, "MSDC0E_DAT1", 141, DRV_GRP4),
-+ MT7623_PIN(257, "MSDC0E_DAT0", 142, DRV_GRP4),
-+ MT7623_PIN(258, "MSDC0E_CMD", 143, DRV_GRP4),
-+ MT7623_PIN(259, "MSDC0E_CLK", 144, DRV_GRP4),
-+ MT7623_PIN(260, "MSDC0E_DSL", 145, DRV_GRP4),
-+ MT7623_PIN(261, "MSDC1_INS", 146, DRV_GRP4),
-+ MT7623_PIN(262, "G2_TXEN", 8, DRV_GRP1),
-+ MT7623_PIN(263, "G2_TXD3", 9, DRV_GRP1),
-+ MT7623_PIN(264, "G2_TXD2", 10, DRV_GRP1),
-+ MT7623_PIN(265, "G2_TXD1", 11, DRV_GRP1),
-+ MT7623_PIN(266, "G2_TXD0", EINT_NA, DRV_GRP1),
-+ MT7623_PIN(267, "G2_TXC", EINT_NA, DRV_GRP1),
-+ MT7623_PIN(268, "G2_RXC", EINT_NA, DRV_GRP1),
-+ MT7623_PIN(269, "G2_RXD0", EINT_NA, DRV_GRP1),
-+ MT7623_PIN(270, "G2_RXD1", EINT_NA, DRV_GRP1),
-+ MT7623_PIN(271, "G2_RXD2", EINT_NA, DRV_GRP1),
-+ MT7623_PIN(272, "G2_RXD3", EINT_NA, DRV_GRP1),
-+ MT7623_PIN(273, "ESW_INT", 168, DRV_GRP1),
-+ MT7623_PIN(274, "G2_RXDV", EINT_NA, DRV_GRP1),
-+ MT7623_PIN(275, "MDC", EINT_NA, DRV_GRP1),
-+ MT7623_PIN(276, "MDIO", EINT_NA, DRV_GRP1),
-+ MT7623_PIN(277, "ESW_RST", EINT_NA, DRV_GRP1),
-+ MT7623_PIN(278, "JTAG_RESET", 147, DRV_GRP3),
-+ MT7623_PIN(279, "USB3_RES_BOND", EINT_NA, DRV_GRP1),
-+};
-+
-+/* List all groups consisting of these pins dedicated to the enablement of
-+ * certain hardware block and the corresponding mode for all of the pins.
-+ * The hardware probably has multiple combinations of these pinouts.
-+ */
-+
-+/* AUDIO EXT CLK */
-+static int mt7623_aud_ext_clk0_pins[] = { 208, };
-+static int mt7623_aud_ext_clk0_funcs[] = { 1, };
-+static int mt7623_aud_ext_clk1_pins[] = { 209, };
-+static int mt7623_aud_ext_clk1_funcs[] = { 1, };
-+
-+/* DISP PWM */
-+static int mt7623_disp_pwm_0_pins[] = { 72, };
-+static int mt7623_disp_pwm_0_funcs[] = { 5, };
-+static int mt7623_disp_pwm_1_pins[] = { 203, };
-+static int mt7623_disp_pwm_1_funcs[] = { 2, };
-+static int mt7623_disp_pwm_2_pins[] = { 208, };
-+static int mt7623_disp_pwm_2_funcs[] = { 5, };
-+
-+/* ESW */
-+static int mt7623_esw_int_pins[] = { 273, };
-+static int mt7623_esw_int_funcs[] = { 1, };
-+static int mt7623_esw_rst_pins[] = { 277, };
-+static int mt7623_esw_rst_funcs[] = { 1, };
-+
-+/* EPHY */
-+static int mt7623_ephy_pins[] = { 262, 263, 264, 265, 266, 267, 268,
-+ 269, 270, 271, 272, 274, };
-+static int mt7623_ephy_funcs[] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, };
-+
-+/* EXT_SDIO */
-+static int mt7623_ext_sdio_pins[] = { 236, 237, 238, 239, 240, 241, };
-+static int mt7623_ext_sdio_funcs[] = { 1, 1, 1, 1, 1, 1, };
-+
-+/* HDMI RX */
-+static int mt7623_hdmi_rx_pins[] = { 247, 248, };
-+static int mt7623_hdmi_rx_funcs[] = { 1, 1 };
-+static int mt7623_hdmi_rx_i2c_pins[] = { 244, 245, };
-+static int mt7623_hdmi_rx_i2c_funcs[] = { 1, 1 };
-+
-+/* HDMI TX */
-+static int mt7623_hdmi_cec_pins[] = { 122, };
-+static int mt7623_hdmi_cec_funcs[] = { 1, };
-+static int mt7623_hdmi_htplg_pins[] = { 123, };
-+static int mt7623_hdmi_htplg_funcs[] = { 1, };
-+static int mt7623_hdmi_i2c_pins[] = { 124, 125, };
-+static int mt7623_hdmi_i2c_funcs[] = { 1, 1 };
-+
-+/* I2C */
-+static int mt7623_i2c0_pins[] = { 75, 76, };
-+static int mt7623_i2c0_funcs[] = { 1, 1, };
-+static int mt7623_i2c1_0_pins[] = { 57, 58, };
-+static int mt7623_i2c1_0_funcs[] = { 1, 1, };
-+static int mt7623_i2c1_1_pins[] = { 242, 243, };
-+static int mt7623_i2c1_1_funcs[] = { 4, 4, };
-+static int mt7623_i2c1_2_pins[] = { 85, 86, };
-+static int mt7623_i2c1_2_funcs[] = { 3, 3, };
-+static int mt7623_i2c1_3_pins[] = { 105, 106, };
-+static int mt7623_i2c1_3_funcs[] = { 3, 3, };
-+static int mt7623_i2c1_4_pins[] = { 124, 125, };
-+static int mt7623_i2c1_4_funcs[] = { 4, 4, };
-+static int mt7623_i2c2_0_pins[] = { 77, 78, };
-+static int mt7623_i2c2_0_funcs[] = { 1, 1, };
-+static int mt7623_i2c2_1_pins[] = { 89, 90, };
-+static int mt7623_i2c2_1_funcs[] = { 3, 3, };
-+static int mt7623_i2c2_2_pins[] = { 109, 110, };
-+static int mt7623_i2c2_2_funcs[] = { 3, 3, };
-+static int mt7623_i2c2_3_pins[] = { 122, 123, };
-+static int mt7623_i2c2_3_funcs[] = { 4, 4, };
-+
-+/* I2S */
-+static int mt7623_i2s0_pins[] = { 49, 72, 73, 74, 126, };
-+static int mt7623_i2s0_funcs[] = { 1, 1, 1, 1, 1, };
-+static int mt7623_i2s1_pins[] = { 33, 34, 35, 36, 37, };
-+static int mt7623_i2s1_funcs[] = { 1, 1, 1, 1, 1, };
-+static int mt7623_i2s2_bclk_lrclk_mclk_pins[] = { 50, 52, 188, };
-+static int mt7623_i2s2_bclk_lrclk_mclk_funcs[] = { 1, 1, 1, };
-+static int mt7623_i2s2_data_in_pins[] = { 51, };
-+static int mt7623_i2s2_data_in_funcs[] = { 1, };
-+static int mt7623_i2s2_data_0_pins[] = { 203, };
-+static int mt7623_i2s2_data_0_funcs[] = { 9, };
-+static int mt7623_i2s2_data_1_pins[] = { 38, };
-+static int mt7623_i2s2_data_1_funcs[] = { 4, };
-+static int mt7623_i2s3_bclk_lrclk_mclk_pins[] = { 191, 192, 193, };
-+static int mt7623_i2s3_bclk_lrclk_mclk_funcs[] = { 1, 1, 1, };
-+static int mt7623_i2s3_data_in_pins[] = { 190, };
-+static int mt7623_i2s3_data_in_funcs[] = { 1, };
-+static int mt7623_i2s3_data_0_pins[] = { 204, };
-+static int mt7623_i2s3_data_0_funcs[] = { 9, };
-+static int mt7623_i2s3_data_1_pins[] = { 2, };
-+static int mt7623_i2s3_data_1_funcs[] = { 0, };
-+static int mt7623_i2s4_pins[] = { 194, 195, 196, 197, 198, };
-+static int mt7623_i2s4_funcs[] = { 1, 1, 1, 1, 1, };
-+static int mt7623_i2s5_pins[] = { 16, 17, 30, 31, 32, };
-+static int mt7623_i2s5_funcs[] = { 1, 1, 1, 1, 1, };
-+
-+/* IR */
-+static int mt7623_ir_pins[] = { 46, };
-+static int mt7623_ir_funcs[] = { 1, };
-+
-+/* LCD */
-+static int mt7623_mipi_tx_pins[] = { 91, 92, 93, 94, 95, 96, 97, 98,
-+ 99, 100, };
-+static int mt7623_mipi_tx_funcs[] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, };
-+static int mt7623_dsi_te_pins[] = { 84, };
-+static int mt7623_dsi_te_funcs[] = { 1, };
-+static int mt7623_lcm_rst_pins[] = { 83, };
-+static int mt7623_lcm_rst_funcs[] = { 1, };
-+
-+/* MDC/MDIO */
-+static int mt7623_mdc_mdio_pins[] = { 275, 276, };
-+static int mt7623_mdc_mdio_funcs[] = { 1, 1, };
-+
-+/* MSDC */
-+static int mt7623_msdc0_pins[] = { 111, 112, 113, 114, 115, 116, 117, 118,
-+ 119, 120, 121, };
-+static int mt7623_msdc0_funcs[] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, };
-+static int mt7623_msdc1_pins[] = { 105, 106, 107, 108, 109, 110, };
-+static int mt7623_msdc1_funcs[] = { 1, 1, 1, 1, 1, 1, };
-+static int mt7623_msdc1_ins_pins[] = { 261, };
-+static int mt7623_msdc1_ins_funcs[] = { 1, };
-+static int mt7623_msdc1_wp_0_pins[] = { 29, };
-+static int mt7623_msdc1_wp_0_funcs[] = { 1, };
-+static int mt7623_msdc1_wp_1_pins[] = { 55, };
-+static int mt7623_msdc1_wp_1_funcs[] = { 3, };
-+static int mt7623_msdc1_wp_2_pins[] = { 209, };
-+static int mt7623_msdc1_wp_2_funcs[] = { 2, };
-+static int mt7623_msdc2_pins[] = { 85, 86, 87, 88, 89, 90, };
-+static int mt7623_msdc2_funcs[] = { 1, 1, 1, 1, 1, 1, };
-+static int mt7623_msdc3_pins[] = { 249, 250, 251, 252, 253, 254, 255, 256,
-+ 257, 258, 259, 260, };
-+static int mt7623_msdc3_funcs[] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, };
-+
-+/* NAND */
-+static int mt7623_nandc_pins[] = { 43, 47, 48, 111, 112, 113, 114, 115,
-+ 116, 117, 118, 119, 120, 121, };
-+static int mt7623_nandc_funcs[] = { 1, 1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4,
-+ 4, 4, };
-+static int mt7623_nandc_ceb0_pins[] = { 45, };
-+static int mt7623_nandc_ceb0_funcs[] = { 1, };
-+static int mt7623_nandc_ceb1_pins[] = { 44, };
-+static int mt7623_nandc_ceb1_funcs[] = { 1, };
-+
-+/* RTC */
-+static int mt7623_rtc_pins[] = { 10, };
-+static int mt7623_rtc_funcs[] = { 1, };
-+
-+/* OTG */
-+static int mt7623_otg_iddig0_0_pins[] = { 29, };
-+static int mt7623_otg_iddig0_0_funcs[] = { 1, };
-+static int mt7623_otg_iddig0_1_pins[] = { 44, };
-+static int mt7623_otg_iddig0_1_funcs[] = { 2, };
-+static int mt7623_otg_iddig0_2_pins[] = { 236, };
-+static int mt7623_otg_iddig0_2_funcs[] = { 2, };
-+static int mt7623_otg_iddig1_0_pins[] = { 27, };
-+static int mt7623_otg_iddig1_0_funcs[] = { 2, };
-+static int mt7623_otg_iddig1_1_pins[] = { 47, };
-+static int mt7623_otg_iddig1_1_funcs[] = { 2, };
-+static int mt7623_otg_iddig1_2_pins[] = { 238, };
-+static int mt7623_otg_iddig1_2_funcs[] = { 2, };
-+static int mt7623_otg_drv_vbus0_0_pins[] = { 28, };
-+static int mt7623_otg_drv_vbus0_0_funcs[] = { 1, };
-+static int mt7623_otg_drv_vbus0_1_pins[] = { 45, };
-+static int mt7623_otg_drv_vbus0_1_funcs[] = { 2, };
-+static int mt7623_otg_drv_vbus0_2_pins[] = { 237, };
-+static int mt7623_otg_drv_vbus0_2_funcs[] = { 2, };
-+static int mt7623_otg_drv_vbus1_0_pins[] = { 26, };
-+static int mt7623_otg_drv_vbus1_0_funcs[] = { 2, };
-+static int mt7623_otg_drv_vbus1_1_pins[] = { 48, };
-+static int mt7623_otg_drv_vbus1_1_funcs[] = { 2, };
-+static int mt7623_otg_drv_vbus1_2_pins[] = { 239, };
-+static int mt7623_otg_drv_vbus1_2_funcs[] = { 2, };
-+
-+/* PCIE */
-+static int mt7623_pcie0_0_perst_pins[] = { 208, };
-+static int mt7623_pcie0_0_perst_funcs[] = { 3, };
-+static int mt7623_pcie0_1_perst_pins[] = { 22, };
-+static int mt7623_pcie0_1_perst_funcs[] = { 2, };
-+static int mt7623_pcie1_0_perst_pins[] = { 209, };
-+static int mt7623_pcie1_0_perst_funcs[] = { 3, };
-+static int mt7623_pcie1_1_perst_pins[] = { 23, };
-+static int mt7623_pcie1_1_perst_funcs[] = { 2, };
-+static int mt7623_pcie2_0_perst_pins[] = { 24, };
-+static int mt7623_pcie2_0_perst_funcs[] = { 2, };
-+static int mt7623_pcie2_1_perst_pins[] = { 29, };
-+static int mt7623_pcie2_1_perst_funcs[] = { 6, };
-+static int mt7623_pcie0_0_wake_pins[] = { 28, };
-+static int mt7623_pcie0_0_wake_funcs[] = { 6, };
-+static int mt7623_pcie0_1_wake_pins[] = { 251, };
-+static int mt7623_pcie0_1_wake_funcs[] = { 6, };
-+static int mt7623_pcie1_0_wake_pins[] = { 27, };
-+static int mt7623_pcie1_0_wake_funcs[] = { 6, };
-+static int mt7623_pcie1_1_wake_pins[] = { 253, };
-+static int mt7623_pcie1_1_wake_funcs[] = { 6, };
-+static int mt7623_pcie2_0_wake_pins[] = { 26, };
-+static int mt7623_pcie2_0_wake_funcs[] = { 6, };
-+static int mt7623_pcie2_1_wake_pins[] = { 255, };
-+static int mt7623_pcie2_1_wake_funcs[] = { 6, };
-+static int mt7623_pcie0_clkreq_pins[] = { 250, };
-+static int mt7623_pcie0_clkreq_funcs[] = { 6, };
-+static int mt7623_pcie1_clkreq_pins[] = { 252, };
-+static int mt7623_pcie1_clkreq_funcs[] = { 6, };
-+static int mt7623_pcie2_clkreq_pins[] = { 254, };
-+static int mt7623_pcie2_clkreq_funcs[] = { 6, };
-+
-+/* the pcie_*_rev are only used for MT7623 */
-+static int mt7623_pcie0_0_rev_perst_pins[] = { 208, };
-+static int mt7623_pcie0_0_rev_perst_funcs[] = { 11, };
-+static int mt7623_pcie0_1_rev_perst_pins[] = { 22, };
-+static int mt7623_pcie0_1_rev_perst_funcs[] = { 10, };
-+static int mt7623_pcie1_0_rev_perst_pins[] = { 209, };
-+static int mt7623_pcie1_0_rev_perst_funcs[] = { 11, };
-+static int mt7623_pcie1_1_rev_perst_pins[] = { 23, };
-+static int mt7623_pcie1_1_rev_perst_funcs[] = { 10, };
-+static int mt7623_pcie2_0_rev_perst_pins[] = { 24, };
-+static int mt7623_pcie2_0_rev_perst_funcs[] = { 11, };
-+static int mt7623_pcie2_1_rev_perst_pins[] = { 29, };
-+static int mt7623_pcie2_1_rev_perst_funcs[] = { 14, };
-+
-+/* PCM */
-+static int mt7623_pcm_clk_0_pins[] = { 18, };
-+static int mt7623_pcm_clk_0_funcs[] = { 1, };
-+static int mt7623_pcm_clk_1_pins[] = { 17, };
-+static int mt7623_pcm_clk_1_funcs[] = { 3, };
-+static int mt7623_pcm_clk_2_pins[] = { 35, };
-+static int mt7623_pcm_clk_2_funcs[] = { 3, };
-+static int mt7623_pcm_clk_3_pins[] = { 50, };
-+static int mt7623_pcm_clk_3_funcs[] = { 3, };
-+static int mt7623_pcm_clk_4_pins[] = { 74, };
-+static int mt7623_pcm_clk_4_funcs[] = { 3, };
-+static int mt7623_pcm_clk_5_pins[] = { 191, };
-+static int mt7623_pcm_clk_5_funcs[] = { 3, };
-+static int mt7623_pcm_clk_6_pins[] = { 196, };
-+static int mt7623_pcm_clk_6_funcs[] = { 3, };
-+static int mt7623_pcm_sync_0_pins[] = { 19, };
-+static int mt7623_pcm_sync_0_funcs[] = { 1, };
-+static int mt7623_pcm_sync_1_pins[] = { 30, };
-+static int mt7623_pcm_sync_1_funcs[] = { 3, };
-+static int mt7623_pcm_sync_2_pins[] = { 36, };
-+static int mt7623_pcm_sync_2_funcs[] = { 3, };
-+static int mt7623_pcm_sync_3_pins[] = { 52, };
-+static int mt7623_pcm_sync_3_funcs[] = { 31, };
-+static int mt7623_pcm_sync_4_pins[] = { 73, };
-+static int mt7623_pcm_sync_4_funcs[] = { 3, };
-+static int mt7623_pcm_sync_5_pins[] = { 192, };
-+static int mt7623_pcm_sync_5_funcs[] = { 3, };
-+static int mt7623_pcm_sync_6_pins[] = { 197, };
-+static int mt7623_pcm_sync_6_funcs[] = { 3, };
-+static int mt7623_pcm_rx_0_pins[] = { 20, };
-+static int mt7623_pcm_rx_0_funcs[] = { 1, };
-+static int mt7623_pcm_rx_1_pins[] = { 16, };
-+static int mt7623_pcm_rx_1_funcs[] = { 3, };
-+static int mt7623_pcm_rx_2_pins[] = { 34, };
-+static int mt7623_pcm_rx_2_funcs[] = { 3, };
-+static int mt7623_pcm_rx_3_pins[] = { 51, };
-+static int mt7623_pcm_rx_3_funcs[] = { 3, };
-+static int mt7623_pcm_rx_4_pins[] = { 72, };
-+static int mt7623_pcm_rx_4_funcs[] = { 3, };
-+static int mt7623_pcm_rx_5_pins[] = { 190, };
-+static int mt7623_pcm_rx_5_funcs[] = { 3, };
-+static int mt7623_pcm_rx_6_pins[] = { 195, };
-+static int mt7623_pcm_rx_6_funcs[] = { 3, };
-+static int mt7623_pcm_tx_0_pins[] = { 21, };
-+static int mt7623_pcm_tx_0_funcs[] = { 1, };
-+static int mt7623_pcm_tx_1_pins[] = { 32, };
-+static int mt7623_pcm_tx_1_funcs[] = { 3, };
-+static int mt7623_pcm_tx_2_pins[] = { 33, };
-+static int mt7623_pcm_tx_2_funcs[] = { 3, };
-+static int mt7623_pcm_tx_3_pins[] = { 38, };
-+static int mt7623_pcm_tx_3_funcs[] = { 3, };
-+static int mt7623_pcm_tx_4_pins[] = { 49, };
-+static int mt7623_pcm_tx_4_funcs[] = { 3, };
-+static int mt7623_pcm_tx_5_pins[] = { 189, };
-+static int mt7623_pcm_tx_5_funcs[] = { 3, };
-+static int mt7623_pcm_tx_6_pins[] = { 194, };
-+static int mt7623_pcm_tx_6_funcs[] = { 3, };
-+
-+/* PWM */
-+static int mt7623_pwm_ch1_0_pins[] = { 203, };
-+static int mt7623_pwm_ch1_0_funcs[] = { 1, };
-+static int mt7623_pwm_ch1_1_pins[] = { 208, };
-+static int mt7623_pwm_ch1_1_funcs[] = { 2, };
-+static int mt7623_pwm_ch1_2_pins[] = { 72, };
-+static int mt7623_pwm_ch1_2_funcs[] = { 4, };
-+static int mt7623_pwm_ch1_3_pins[] = { 88, };
-+static int mt7623_pwm_ch1_3_funcs[] = { 3, };
-+static int mt7623_pwm_ch1_4_pins[] = { 108, };
-+static int mt7623_pwm_ch1_4_funcs[] = { 3, };
-+static int mt7623_pwm_ch2_0_pins[] = { 204, };
-+static int mt7623_pwm_ch2_0_funcs[] = { 1, };
-+static int mt7623_pwm_ch2_1_pins[] = { 53, };
-+static int mt7623_pwm_ch2_1_funcs[] = { 5, };
-+static int mt7623_pwm_ch2_2_pins[] = { 88, };
-+static int mt7623_pwm_ch2_2_funcs[] = { 6, };
-+static int mt7623_pwm_ch2_3_pins[] = { 108, };
-+static int mt7623_pwm_ch2_3_funcs[] = { 6, };
-+static int mt7623_pwm_ch2_4_pins[] = { 209, };
-+static int mt7623_pwm_ch2_4_funcs[] = { 5, };
-+static int mt7623_pwm_ch3_0_pins[] = { 205, };
-+static int mt7623_pwm_ch3_0_funcs[] = { 1, };
-+static int mt7623_pwm_ch3_1_pins[] = { 55, };
-+static int mt7623_pwm_ch3_1_funcs[] = { 5, };
-+static int mt7623_pwm_ch3_2_pins[] = { 89, };
-+static int mt7623_pwm_ch3_2_funcs[] = { 6, };
-+static int mt7623_pwm_ch3_3_pins[] = { 109, };
-+static int mt7623_pwm_ch3_3_funcs[] = { 6, };
-+static int mt7623_pwm_ch4_0_pins[] = { 206, };
-+static int mt7623_pwm_ch4_0_funcs[] = { 1, };
-+static int mt7623_pwm_ch4_1_pins[] = { 90, };
-+static int mt7623_pwm_ch4_1_funcs[] = { 6, };
-+static int mt7623_pwm_ch4_2_pins[] = { 110, };
-+static int mt7623_pwm_ch4_2_funcs[] = { 6, };
-+static int mt7623_pwm_ch4_3_pins[] = { 124, };
-+static int mt7623_pwm_ch4_3_funcs[] = { 5, };
-+static int mt7623_pwm_ch5_0_pins[] = { 207, };
-+static int mt7623_pwm_ch5_0_funcs[] = { 1, };
-+static int mt7623_pwm_ch5_1_pins[] = { 125, };
-+static int mt7623_pwm_ch5_1_funcs[] = { 5, };
-+
-+/* PWRAP */
-+static int mt7623_pwrap_pins[] = { 0, 1, 2, 3, 4, 5, 6, };
-+static int mt7623_pwrap_funcs[] = { 1, 1, 1, 1, 1, 1, 1, };
-+
-+/* SPDIF */
-+static int mt7623_spdif_in0_0_pins[] = { 56, };
-+static int mt7623_spdif_in0_0_funcs[] = { 3, };
-+static int mt7623_spdif_in0_1_pins[] = { 201, };
-+static int mt7623_spdif_in0_1_funcs[] = { 1, };
-+static int mt7623_spdif_in1_0_pins[] = { 54, };
-+static int mt7623_spdif_in1_0_funcs[] = { 3, };
-+static int mt7623_spdif_in1_1_pins[] = { 202, };
-+static int mt7623_spdif_in1_1_funcs[] = { 1, };
-+static int mt7623_spdif_out_pins[] = { 202, };
-+static int mt7623_spdif_out_funcs[] = { 1, };
-+
-+/* SPI */
-+static int mt7623_spi0_pins[] = { 53, 54, 55, 56, };
-+static int mt7623_spi0_funcs[] = { 1, 1, 1, 1, };
-+static int mt7623_spi1_pins[] = { 7, 199, 8, 9, };
-+static int mt7623_spi1_funcs[] = { 1, 1, 1, 1, };
-+static int mt7623_spi2_pins[] = { 101, 104, 102, 103, };
-+static int mt7623_spi2_funcs[] = { 1, 1, 1, 1, };
-+
-+/* UART */
-+static int mt7623_uart0_0_txd_rxd_pins[] = { 79, 80, };
-+static int mt7623_uart0_0_txd_rxd_funcs[] = { 1, 1, };
-+static int mt7623_uart0_1_txd_rxd_pins[] = { 87, 88, };
-+static int mt7623_uart0_1_txd_rxd_funcs[] = { 5, 5, };
-+static int mt7623_uart0_2_txd_rxd_pins[] = { 107, 108, };
-+static int mt7623_uart0_2_txd_rxd_funcs[] = { 5, 5, };
-+static int mt7623_uart0_3_txd_rxd_pins[] = { 123, 122, };
-+static int mt7623_uart0_3_txd_rxd_funcs[] = { 5, 5, };
-+static int mt7623_uart0_rts_cts_pins[] = { 22, 23, };
-+static int mt7623_uart0_rts_cts_funcs[] = { 1, 1, };
-+static int mt7623_uart1_0_txd_rxd_pins[] = { 81, 82, };
-+static int mt7623_uart1_0_txd_rxd_funcs[] = { 1, 1, };
-+static int mt7623_uart1_1_txd_rxd_pins[] = { 89, 90, };
-+static int mt7623_uart1_1_txd_rxd_funcs[] = { 5, 5, };
-+static int mt7623_uart1_2_txd_rxd_pins[] = { 109, 110, };
-+static int mt7623_uart1_2_txd_rxd_funcs[] = { 5, 5, };
-+static int mt7623_uart1_rts_cts_pins[] = { 24, 25, };
-+static int mt7623_uart1_rts_cts_funcs[] = { 1, 1, };
-+static int mt7623_uart2_0_txd_rxd_pins[] = { 14, 15, };
-+static int mt7623_uart2_0_txd_rxd_funcs[] = { 1, 1, };
-+static int mt7623_uart2_1_txd_rxd_pins[] = { 200, 201, };
-+static int mt7623_uart2_1_txd_rxd_funcs[] = { 6, 6, };
-+static int mt7623_uart2_rts_cts_pins[] = { 242, 243, };
-+static int mt7623_uart2_rts_cts_funcs[] = { 1, 1, };
-+static int mt7623_uart3_txd_rxd_pins[] = { 242, 243, };
-+static int mt7623_uart3_txd_rxd_funcs[] = { 2, 2, };
-+static int mt7623_uart3_rts_cts_pins[] = { 26, 27, };
-+static int mt7623_uart3_rts_cts_funcs[] = { 1, 1, };
-+
-+/* Watchdog */
-+static int mt7623_watchdog_0_pins[] = { 11, };
-+static int mt7623_watchdog_0_funcs[] = { 1, };
-+static int mt7623_watchdog_1_pins[] = { 121, };
-+static int mt7623_watchdog_1_funcs[] = { 5, };
-+
-+static const struct group_desc mt7623_groups[] = {
-+ PINCTRL_PIN_GROUP("aud_ext_clk0", mt7623_aud_ext_clk0),
-+ PINCTRL_PIN_GROUP("aud_ext_clk1", mt7623_aud_ext_clk1),
-+ PINCTRL_PIN_GROUP("dsi_te", mt7623_dsi_te),
-+ PINCTRL_PIN_GROUP("disp_pwm_0", mt7623_disp_pwm_0),
-+ PINCTRL_PIN_GROUP("disp_pwm_1", mt7623_disp_pwm_1),
-+ PINCTRL_PIN_GROUP("disp_pwm_2", mt7623_disp_pwm_2),
-+ PINCTRL_PIN_GROUP("ephy", mt7623_ephy),
-+ PINCTRL_PIN_GROUP("esw_int", mt7623_esw_int),
-+ PINCTRL_PIN_GROUP("esw_rst", mt7623_esw_rst),
-+ PINCTRL_PIN_GROUP("ext_sdio", mt7623_ext_sdio),
-+ PINCTRL_PIN_GROUP("hdmi_cec", mt7623_hdmi_cec),
-+ PINCTRL_PIN_GROUP("hdmi_htplg", mt7623_hdmi_htplg),
-+ PINCTRL_PIN_GROUP("hdmi_i2c", mt7623_hdmi_i2c),
-+ PINCTRL_PIN_GROUP("hdmi_rx", mt7623_hdmi_rx),
-+ PINCTRL_PIN_GROUP("hdmi_rx_i2c", mt7623_hdmi_rx_i2c),
-+ PINCTRL_PIN_GROUP("i2c0", mt7623_i2c0),
-+ PINCTRL_PIN_GROUP("i2c1_0", mt7623_i2c1_0),
-+ PINCTRL_PIN_GROUP("i2c1_1", mt7623_i2c1_1),
-+ PINCTRL_PIN_GROUP("i2c1_2", mt7623_i2c1_2),
-+ PINCTRL_PIN_GROUP("i2c1_3", mt7623_i2c1_3),
-+ PINCTRL_PIN_GROUP("i2c1_4", mt7623_i2c1_4),
-+ PINCTRL_PIN_GROUP("i2c2_0", mt7623_i2c2_0),
-+ PINCTRL_PIN_GROUP("i2c2_1", mt7623_i2c2_1),
-+ PINCTRL_PIN_GROUP("i2c2_2", mt7623_i2c2_2),
-+ PINCTRL_PIN_GROUP("i2c2_3", mt7623_i2c2_3),
-+ PINCTRL_PIN_GROUP("i2s0", mt7623_i2s0),
-+ PINCTRL_PIN_GROUP("i2s1", mt7623_i2s1),
-+ PINCTRL_PIN_GROUP("i2s4", mt7623_i2s4),
-+ PINCTRL_PIN_GROUP("i2s5", mt7623_i2s5),
-+ PINCTRL_PIN_GROUP("i2s2_bclk_lrclk_mclk", mt7623_i2s2_bclk_lrclk_mclk),
-+ PINCTRL_PIN_GROUP("i2s3_bclk_lrclk_mclk", mt7623_i2s3_bclk_lrclk_mclk),
-+ PINCTRL_PIN_GROUP("i2s2_data_in", mt7623_i2s2_data_in),
-+ PINCTRL_PIN_GROUP("i2s3_data_in", mt7623_i2s3_data_in),
-+ PINCTRL_PIN_GROUP("i2s2_data_0", mt7623_i2s2_data_0),
-+ PINCTRL_PIN_GROUP("i2s2_data_1", mt7623_i2s2_data_1),
-+ PINCTRL_PIN_GROUP("i2s3_data_0", mt7623_i2s3_data_0),
-+ PINCTRL_PIN_GROUP("i2s3_data_1", mt7623_i2s3_data_1),
-+ PINCTRL_PIN_GROUP("ir", mt7623_ir),
-+ PINCTRL_PIN_GROUP("lcm_rst", mt7623_lcm_rst),
-+ PINCTRL_PIN_GROUP("mdc_mdio", mt7623_mdc_mdio),
-+ PINCTRL_PIN_GROUP("mipi_tx", mt7623_mipi_tx),
-+ PINCTRL_PIN_GROUP("msdc0", mt7623_msdc0),
-+ PINCTRL_PIN_GROUP("msdc1", mt7623_msdc1),
-+ PINCTRL_PIN_GROUP("msdc1_ins", mt7623_msdc1_ins),
-+ PINCTRL_PIN_GROUP("msdc1_wp_0", mt7623_msdc1_wp_0),
-+ PINCTRL_PIN_GROUP("msdc1_wp_1", mt7623_msdc1_wp_1),
-+ PINCTRL_PIN_GROUP("msdc1_wp_2", mt7623_msdc1_wp_2),
-+ PINCTRL_PIN_GROUP("msdc2", mt7623_msdc2),
-+ PINCTRL_PIN_GROUP("msdc3", mt7623_msdc3),
-+ PINCTRL_PIN_GROUP("nandc", mt7623_nandc),
-+ PINCTRL_PIN_GROUP("nandc_ceb0", mt7623_nandc_ceb0),
-+ PINCTRL_PIN_GROUP("nandc_ceb1", mt7623_nandc_ceb1),
-+ PINCTRL_PIN_GROUP("otg_iddig0_0", mt7623_otg_iddig0_0),
-+ PINCTRL_PIN_GROUP("otg_iddig0_1", mt7623_otg_iddig0_1),
-+ PINCTRL_PIN_GROUP("otg_iddig0_2", mt7623_otg_iddig0_2),
-+ PINCTRL_PIN_GROUP("otg_iddig1_0", mt7623_otg_iddig1_0),
-+ PINCTRL_PIN_GROUP("otg_iddig1_1", mt7623_otg_iddig1_1),
-+ PINCTRL_PIN_GROUP("otg_iddig1_2", mt7623_otg_iddig1_2),
-+ PINCTRL_PIN_GROUP("otg_drv_vbus0_0", mt7623_otg_drv_vbus0_0),
-+ PINCTRL_PIN_GROUP("otg_drv_vbus0_1", mt7623_otg_drv_vbus0_1),
-+ PINCTRL_PIN_GROUP("otg_drv_vbus0_2", mt7623_otg_drv_vbus0_2),
-+ PINCTRL_PIN_GROUP("otg_drv_vbus1_0", mt7623_otg_drv_vbus1_0),
-+ PINCTRL_PIN_GROUP("otg_drv_vbus1_1", mt7623_otg_drv_vbus1_1),
-+ PINCTRL_PIN_GROUP("otg_drv_vbus1_2", mt7623_otg_drv_vbus1_2),
-+ PINCTRL_PIN_GROUP("pcie0_0_perst", mt7623_pcie0_0_perst),
-+ PINCTRL_PIN_GROUP("pcie0_1_perst", mt7623_pcie0_1_perst),
-+ PINCTRL_PIN_GROUP("pcie1_0_perst", mt7623_pcie1_0_perst),
-+ PINCTRL_PIN_GROUP("pcie1_1_perst", mt7623_pcie1_1_perst),
-+ PINCTRL_PIN_GROUP("pcie1_1_perst", mt7623_pcie1_1_perst),
-+ PINCTRL_PIN_GROUP("pcie0_0_rev_perst", mt7623_pcie0_0_rev_perst),
-+ PINCTRL_PIN_GROUP("pcie0_1_rev_perst", mt7623_pcie0_1_rev_perst),
-+ PINCTRL_PIN_GROUP("pcie1_0_rev_perst", mt7623_pcie1_0_rev_perst),
-+ PINCTRL_PIN_GROUP("pcie1_1_rev_perst", mt7623_pcie1_1_rev_perst),
-+ PINCTRL_PIN_GROUP("pcie2_0_rev_perst", mt7623_pcie2_0_rev_perst),
-+ PINCTRL_PIN_GROUP("pcie2_1_rev_perst", mt7623_pcie2_1_rev_perst),
-+ PINCTRL_PIN_GROUP("pcie2_0_perst", mt7623_pcie2_0_perst),
-+ PINCTRL_PIN_GROUP("pcie2_1_perst", mt7623_pcie2_1_perst),
-+ PINCTRL_PIN_GROUP("pcie0_0_wake", mt7623_pcie0_0_wake),
-+ PINCTRL_PIN_GROUP("pcie0_1_wake", mt7623_pcie0_1_wake),
-+ PINCTRL_PIN_GROUP("pcie1_0_wake", mt7623_pcie1_0_wake),
-+ PINCTRL_PIN_GROUP("pcie1_1_wake", mt7623_pcie1_1_wake),
-+ PINCTRL_PIN_GROUP("pcie2_0_wake", mt7623_pcie2_0_wake),
-+ PINCTRL_PIN_GROUP("pcie2_1_wake", mt7623_pcie2_1_wake),
-+ PINCTRL_PIN_GROUP("pcie0_clkreq", mt7623_pcie0_clkreq),
-+ PINCTRL_PIN_GROUP("pcie1_clkreq", mt7623_pcie1_clkreq),
-+ PINCTRL_PIN_GROUP("pcie2_clkreq", mt7623_pcie2_clkreq),
-+ PINCTRL_PIN_GROUP("pcm_clk_0", mt7623_pcm_clk_0),
-+ PINCTRL_PIN_GROUP("pcm_clk_1", mt7623_pcm_clk_1),
-+ PINCTRL_PIN_GROUP("pcm_clk_2", mt7623_pcm_clk_2),
-+ PINCTRL_PIN_GROUP("pcm_clk_3", mt7623_pcm_clk_3),
-+ PINCTRL_PIN_GROUP("pcm_clk_4", mt7623_pcm_clk_4),
-+ PINCTRL_PIN_GROUP("pcm_clk_5", mt7623_pcm_clk_5),
-+ PINCTRL_PIN_GROUP("pcm_clk_6", mt7623_pcm_clk_6),
-+ PINCTRL_PIN_GROUP("pcm_sync_0", mt7623_pcm_sync_0),
-+ PINCTRL_PIN_GROUP("pcm_sync_1", mt7623_pcm_sync_1),
-+ PINCTRL_PIN_GROUP("pcm_sync_2", mt7623_pcm_sync_2),
-+ PINCTRL_PIN_GROUP("pcm_sync_3", mt7623_pcm_sync_3),
-+ PINCTRL_PIN_GROUP("pcm_sync_4", mt7623_pcm_sync_4),
-+ PINCTRL_PIN_GROUP("pcm_sync_5", mt7623_pcm_sync_5),
-+ PINCTRL_PIN_GROUP("pcm_sync_6", mt7623_pcm_sync_6),
-+ PINCTRL_PIN_GROUP("pcm_rx_0", mt7623_pcm_rx_0),
-+ PINCTRL_PIN_GROUP("pcm_rx_1", mt7623_pcm_rx_1),
-+ PINCTRL_PIN_GROUP("pcm_rx_2", mt7623_pcm_rx_2),
-+ PINCTRL_PIN_GROUP("pcm_rx_3", mt7623_pcm_rx_3),
-+ PINCTRL_PIN_GROUP("pcm_rx_4", mt7623_pcm_rx_4),
-+ PINCTRL_PIN_GROUP("pcm_rx_5", mt7623_pcm_rx_5),
-+ PINCTRL_PIN_GROUP("pcm_rx_6", mt7623_pcm_rx_6),
-+ PINCTRL_PIN_GROUP("pcm_tx_0", mt7623_pcm_tx_0),
-+ PINCTRL_PIN_GROUP("pcm_tx_1", mt7623_pcm_tx_1),
-+ PINCTRL_PIN_GROUP("pcm_tx_2", mt7623_pcm_tx_2),
-+ PINCTRL_PIN_GROUP("pcm_tx_3", mt7623_pcm_tx_3),
-+ PINCTRL_PIN_GROUP("pcm_tx_4", mt7623_pcm_tx_4),
-+ PINCTRL_PIN_GROUP("pcm_tx_5", mt7623_pcm_tx_5),
-+ PINCTRL_PIN_GROUP("pcm_tx_6", mt7623_pcm_tx_6),
-+ PINCTRL_PIN_GROUP("pwm_ch1_0", mt7623_pwm_ch1_0),
-+ PINCTRL_PIN_GROUP("pwm_ch1_1", mt7623_pwm_ch1_1),
-+ PINCTRL_PIN_GROUP("pwm_ch1_2", mt7623_pwm_ch1_2),
-+ PINCTRL_PIN_GROUP("pwm_ch1_3", mt7623_pwm_ch1_3),
-+ PINCTRL_PIN_GROUP("pwm_ch1_4", mt7623_pwm_ch1_4),
-+ PINCTRL_PIN_GROUP("pwm_ch2_0", mt7623_pwm_ch2_0),
-+ PINCTRL_PIN_GROUP("pwm_ch2_1", mt7623_pwm_ch2_1),
-+ PINCTRL_PIN_GROUP("pwm_ch2_2", mt7623_pwm_ch2_2),
-+ PINCTRL_PIN_GROUP("pwm_ch2_3", mt7623_pwm_ch2_3),
-+ PINCTRL_PIN_GROUP("pwm_ch2_4", mt7623_pwm_ch2_4),
-+ PINCTRL_PIN_GROUP("pwm_ch3_0", mt7623_pwm_ch3_0),
-+ PINCTRL_PIN_GROUP("pwm_ch3_1", mt7623_pwm_ch3_1),
-+ PINCTRL_PIN_GROUP("pwm_ch3_2", mt7623_pwm_ch3_2),
-+ PINCTRL_PIN_GROUP("pwm_ch3_3", mt7623_pwm_ch3_3),
-+ PINCTRL_PIN_GROUP("pwm_ch4_0", mt7623_pwm_ch4_0),
-+ PINCTRL_PIN_GROUP("pwm_ch4_1", mt7623_pwm_ch4_1),
-+ PINCTRL_PIN_GROUP("pwm_ch4_2", mt7623_pwm_ch4_2),
-+ PINCTRL_PIN_GROUP("pwm_ch4_3", mt7623_pwm_ch4_3),
-+ PINCTRL_PIN_GROUP("pwm_ch5_0", mt7623_pwm_ch5_0),
-+ PINCTRL_PIN_GROUP("pwm_ch5_1", mt7623_pwm_ch5_1),
-+ PINCTRL_PIN_GROUP("pwrap", mt7623_pwrap),
-+ PINCTRL_PIN_GROUP("rtc", mt7623_rtc),
-+ PINCTRL_PIN_GROUP("spdif_in0_0", mt7623_spdif_in0_0),
-+ PINCTRL_PIN_GROUP("spdif_in0_1", mt7623_spdif_in0_1),
-+ PINCTRL_PIN_GROUP("spdif_in1_0", mt7623_spdif_in1_0),
-+ PINCTRL_PIN_GROUP("spdif_in1_1", mt7623_spdif_in1_1),
-+ PINCTRL_PIN_GROUP("spdif_out", mt7623_spdif_out),
-+ PINCTRL_PIN_GROUP("spi0", mt7623_spi0),
-+ PINCTRL_PIN_GROUP("spi1", mt7623_spi1),
-+ PINCTRL_PIN_GROUP("spi2", mt7623_spi2),
-+ PINCTRL_PIN_GROUP("uart0_0_txd_rxd", mt7623_uart0_0_txd_rxd),
-+ PINCTRL_PIN_GROUP("uart0_1_txd_rxd", mt7623_uart0_1_txd_rxd),
-+ PINCTRL_PIN_GROUP("uart0_2_txd_rxd", mt7623_uart0_2_txd_rxd),
-+ PINCTRL_PIN_GROUP("uart0_3_txd_rxd", mt7623_uart0_3_txd_rxd),
-+ PINCTRL_PIN_GROUP("uart1_0_txd_rxd", mt7623_uart1_0_txd_rxd),
-+ PINCTRL_PIN_GROUP("uart1_1_txd_rxd", mt7623_uart1_1_txd_rxd),
-+ PINCTRL_PIN_GROUP("uart1_2_txd_rxd", mt7623_uart1_2_txd_rxd),
-+ PINCTRL_PIN_GROUP("uart2_0_txd_rxd", mt7623_uart2_0_txd_rxd),
-+ PINCTRL_PIN_GROUP("uart2_1_txd_rxd", mt7623_uart2_1_txd_rxd),
-+ PINCTRL_PIN_GROUP("uart3_txd_rxd", mt7623_uart3_txd_rxd),
-+ PINCTRL_PIN_GROUP("uart0_rts_cts", mt7623_uart0_rts_cts),
-+ PINCTRL_PIN_GROUP("uart1_rts_cts", mt7623_uart1_rts_cts),
-+ PINCTRL_PIN_GROUP("uart2_rts_cts", mt7623_uart2_rts_cts),
-+ PINCTRL_PIN_GROUP("uart3_rts_cts", mt7623_uart3_rts_cts),
-+ PINCTRL_PIN_GROUP("watchdog_0", mt7623_watchdog_0),
-+ PINCTRL_PIN_GROUP("watchdog_1", mt7623_watchdog_1),
-+};
-+
-+/* Joint those groups owning the same capability in user point of view which
-+ * allows that people tend to use through the device tree.
-+ */
-+static const char *mt7623_aud_clk_groups[] = { "aud_ext_clk0",
-+ "aud_ext_clk1", };
-+static const char *mt7623_disp_pwm_groups[] = { "disp_pwm_0", "disp_pwm_1",
-+ "disp_pwm_2", };
-+static const char *mt7623_ethernet_groups[] = { "esw_int", "esw_rst",
-+ "ephy", "mdc_mdio", };
-+static const char *mt7623_ext_sdio_groups[] = { "ext_sdio", };
-+static const char *mt7623_hdmi_groups[] = { "hdmi_cec", "hdmi_htplg",
-+ "hdmi_i2c", "hdmi_rx",
-+ "hdmi_rx_i2c", };
-+static const char *mt7623_i2c_groups[] = { "i2c0", "i2c1_0", "i2c1_1",
-+ "i2c1_2", "i2c1_3", "i2c1_4",
-+ "i2c2_0", "i2c2_1", "i2c2_2",
-+ "i2c2_3", };
-+static const char *mt7623_i2s_groups[] = { "i2s0", "i2s1",
-+ "i2s2_bclk_lrclk_mclk",
-+ "i2s3_bclk_lrclk_mclk",
-+ "i2s4", "i2s5",
-+ "i2s2_data_in", "i2s3_data_in",
-+ "i2s2_data_0", "i2s2_data_1",
-+ "i2s3_data_0", "i2s3_data_1", };
-+static const char *mt7623_ir_groups[] = { "ir", };
-+static const char *mt7623_lcd_groups[] = { "dsi_te", "lcm_rst", "mipi_tx", };
-+static const char *mt7623_msdc_groups[] = { "msdc0", "msdc1", "msdc1_ins",
-+ "msdc1_wp_0", "msdc1_wp_1",
-+ "msdc1_wp_2", "msdc2",
-+ "msdc3", };
-+static const char *mt7623_nandc_groups[] = { "nandc", "nandc_ceb0",
-+ "nandc_ceb1", };
-+static const char *mt7623_otg_groups[] = { "otg_iddig0_0", "otg_iddig0_1",
-+ "otg_iddig0_2", "otg_iddig1_0",
-+ "otg_iddig1_1", "otg_iddig1_2",
-+ "otg_drv_vbus0_0",
-+ "otg_drv_vbus0_1",
-+ "otg_drv_vbus0_2",
-+ "otg_drv_vbus1_0",
-+ "otg_drv_vbus1_1",
-+ "otg_drv_vbus1_2", };
-+static const char *mt7623_pcie_groups[] = { "pcie0_0_perst", "pcie0_1_perst",
-+ "pcie1_0_perst", "pcie1_1_perst",
-+ "pcie2_0_perst", "pcie2_1_perst",
-+ "pcie0_0_rev_perst",
-+ "pcie0_1_rev_perst",
-+ "pcie1_0_rev_perst",
-+ "pcie1_1_rev_perst",
-+ "pcie2_0_rev_perst",
-+ "pcie2_1_rev_perst",
-+ "pcie0_0_wake", "pcie0_1_wake",
-+ "pcie2_0_wake", "pcie2_1_wake",
-+ "pcie0_clkreq", "pcie1_clkreq",
-+ "pcie2_clkreq", };
-+static const char *mt7623_pcm_groups[] = { "pcm_clk_0", "pcm_clk_1",
-+ "pcm_clk_2", "pcm_clk_3",
-+ "pcm_clk_4", "pcm_clk_5",
-+ "pcm_clk_6", "pcm_sync_0",
-+ "pcm_sync_1", "pcm_sync_2",
-+ "pcm_sync_3", "pcm_sync_4",
-+ "pcm_sync_5", "pcm_sync_6",
-+ "pcm_rx_0", "pcm_rx_1",
-+ "pcm_rx_2", "pcm_rx_3",
-+ "pcm_rx_4", "pcm_rx_5",
-+ "pcm_rx_6", "pcm_tx_0",
-+ "pcm_tx_1", "pcm_tx_2",
-+ "pcm_tx_3", "pcm_tx_4",
-+ "pcm_tx_5", "pcm_tx_6", };
-+static const char *mt7623_pwm_groups[] = { "pwm_ch1_0", "pwm_ch1_1",
-+ "pwm_ch1_2", "pwm_ch2_0",
-+ "pwm_ch2_1", "pwm_ch2_2",
-+ "pwm_ch3_0", "pwm_ch3_1",
-+ "pwm_ch3_2", "pwm_ch4_0",
-+ "pwm_ch4_1", "pwm_ch4_2",
-+ "pwm_ch4_3", "pwm_ch5_0",
-+ "pwm_ch5_1", "pwm_ch5_2",
-+ "pwm_ch6_0", "pwm_ch6_1",
-+ "pwm_ch6_2", "pwm_ch6_3",
-+ "pwm_ch7_0", "pwm_ch7_1",
-+ "pwm_ch7_2", };
-+static const char *mt7623_pwrap_groups[] = { "pwrap", };
-+static const char *mt7623_rtc_groups[] = { "rtc", };
-+static const char *mt7623_spi_groups[] = { "spi0", "spi2", "spi2", };
-+static const char *mt7623_spdif_groups[] = { "spdif_in0_0", "spdif_in0_1",
-+ "spdif_in1_0", "spdif_in1_1",
-+ "spdif_out", };
-+static const char *mt7623_uart_groups[] = { "uart0_0_txd_rxd",
-+ "uart0_1_txd_rxd",
-+ "uart0_2_txd_rxd",
-+ "uart0_3_txd_rxd",
-+ "uart1_0_txd_rxd",
-+ "uart1_1_txd_rxd",
-+ "uart1_2_txd_rxd",
-+ "uart2_0_txd_rxd",
-+ "uart2_1_txd_rxd",
-+ "uart3_txd_rxd",
-+ "uart0_rts_cts",
-+ "uart1_rts_cts",
-+ "uart2_rts_cts",
-+ "uart3_rts_cts", };
-+static const char *mt7623_wdt_groups[] = { "watchdog_0", "watchdog_1", };
-+
-+static const struct function_desc mt7623_functions[] = {
-+ {"audck", mt7623_aud_clk_groups, ARRAY_SIZE(mt7623_aud_clk_groups)},
-+ {"disp", mt7623_disp_pwm_groups, ARRAY_SIZE(mt7623_disp_pwm_groups)},
-+ {"eth", mt7623_ethernet_groups, ARRAY_SIZE(mt7623_ethernet_groups)},
-+ {"sdio", mt7623_ext_sdio_groups, ARRAY_SIZE(mt7623_ext_sdio_groups)},
-+ {"hdmi", mt7623_hdmi_groups, ARRAY_SIZE(mt7623_hdmi_groups)},
-+ {"i2c", mt7623_i2c_groups, ARRAY_SIZE(mt7623_i2c_groups)},
-+ {"i2s", mt7623_i2s_groups, ARRAY_SIZE(mt7623_i2s_groups)},
-+ {"ir", mt7623_ir_groups, ARRAY_SIZE(mt7623_ir_groups)},
-+ {"lcd", mt7623_lcd_groups, ARRAY_SIZE(mt7623_lcd_groups)},
-+ {"msdc", mt7623_msdc_groups, ARRAY_SIZE(mt7623_msdc_groups)},
-+ {"nand", mt7623_nandc_groups, ARRAY_SIZE(mt7623_nandc_groups)},
-+ {"otg", mt7623_otg_groups, ARRAY_SIZE(mt7623_otg_groups)},
-+ {"pcie", mt7623_pcie_groups, ARRAY_SIZE(mt7623_pcie_groups)},
-+ {"pcm", mt7623_pcm_groups, ARRAY_SIZE(mt7623_pcm_groups)},
-+ {"pwm", mt7623_pwm_groups, ARRAY_SIZE(mt7623_pwm_groups)},
-+ {"pwrap", mt7623_pwrap_groups, ARRAY_SIZE(mt7623_pwrap_groups)},
-+ {"rtc", mt7623_rtc_groups, ARRAY_SIZE(mt7623_rtc_groups)},
-+ {"spi", mt7623_spi_groups, ARRAY_SIZE(mt7623_spi_groups)},
-+ {"spdif", mt7623_spdif_groups, ARRAY_SIZE(mt7623_spdif_groups)},
-+ {"uart", mt7623_uart_groups, ARRAY_SIZE(mt7623_uart_groups)},
-+ {"watchdog", mt7623_wdt_groups, ARRAY_SIZE(mt7623_wdt_groups)},
-+};
-+
-+static const struct mtk_eint_hw mt7623_eint_hw = {
-+ .port_mask = 6,
-+ .ports = 6,
-+ .ap_num = 169,
-+ .db_cnt = 20,
-+};
-+
-+static struct mtk_pin_soc mt7623_data = {
-+ .reg_cal = mt7623_reg_cals,
-+ .pins = mt7623_pins,
-+ .npins = ARRAY_SIZE(mt7623_pins),
-+ .grps = mt7623_groups,
-+ .ngrps = ARRAY_SIZE(mt7623_groups),
-+ .funcs = mt7623_functions,
-+ .nfuncs = ARRAY_SIZE(mt7623_functions),
-+ .eint_hw = &mt7623_eint_hw,
-+ .gpio_m = 0,
-+ .ies_present = true,
-+ .base_names = mtk_default_register_base_names,
-+ .nbase_names = ARRAY_SIZE(mtk_default_register_base_names),
-+ .bias_disable_set = mtk_pinconf_bias_disable_set_rev1,
-+ .bias_disable_get = mtk_pinconf_bias_disable_get_rev1,
-+ .bias_set = mtk_pinconf_bias_set_rev1,
-+ .bias_get = mtk_pinconf_bias_get_rev1,
-+ .drive_set = mtk_pinconf_drive_set_rev1,
-+ .drive_get = mtk_pinconf_drive_get_rev1,
-+ .adv_pull_get = mtk_pinconf_adv_pull_get,
-+ .adv_pull_set = mtk_pinconf_adv_pull_set,
-+};
-+
-+/*
-+ * There are some specific pins have mux functions greater than 8,
-+ * and if we want to switch thees high modes we need to disable
-+ * bonding constraints firstly.
-+ */
-+static void mt7623_bonding_disable(struct platform_device *pdev)
-+{
-+ struct mtk_pinctrl *hw = platform_get_drvdata(pdev);
-+
-+ mtk_rmw(hw, 0, PIN_BOND_REG0, BOND_PCIE_CLR, BOND_PCIE_CLR);
-+ mtk_rmw(hw, 0, PIN_BOND_REG1, BOND_I2S_CLR, BOND_I2S_CLR);
-+ mtk_rmw(hw, 0, PIN_BOND_REG2, BOND_MSDC0E_CLR, BOND_MSDC0E_CLR);
-+}
-+
-+static const struct of_device_id mt7623_pctrl_match[] = {
-+ { .compatible = "mediatek,mt7623-moore-pinctrl", },
-+ {}
-+};
-+
-+static int mt7623_pinctrl_probe(struct platform_device *pdev)
-+{
-+ int err;
-+
-+ err = mtk_moore_pinctrl_probe(pdev, &mt7623_data);
-+ if (err)
-+ return err;
-+
-+ mt7623_bonding_disable(pdev);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver mtk_pinctrl_driver = {
-+ .probe = mt7623_pinctrl_probe,
-+ .driver = {
-+ .name = "mt7623-moore-pinctrl",
-+ .of_match_table = mt7623_pctrl_match,
-+ },
-+};
-+
-+static int __init mtk_pinctrl_init(void)
-+{
-+ return platform_driver_register(&mtk_pinctrl_driver);
-+}
-+arch_initcall(mtk_pinctrl_init);
---- /dev/null
-+++ b/drivers/pinctrl/mediatek/pinctrl-mt7629.c
-@@ -0,0 +1,450 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * The MT7629 driver based on Linux generic pinctrl binding.
-+ *
-+ * Copyright (C) 2018 MediaTek Inc.
-+ * Author: Ryder Lee <ryder.lee@mediatek.com>
-+ */
-+
-+#include "pinctrl-moore.h"
-+
-+#define MT7629_PIN(_number, _name, _eint_n) \
-+ MTK_PIN(_number, _name, 0, _eint_n, DRV_GRP1)
-+
-+static const struct mtk_pin_field_calc mt7629_pin_mode_range[] = {
-+ PIN_FIELD(0, 78, 0x300, 0x10, 0, 4),
-+};
-+
-+static const struct mtk_pin_field_calc mt7629_pin_dir_range[] = {
-+ PIN_FIELD(0, 78, 0x0, 0x10, 0, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt7629_pin_di_range[] = {
-+ PIN_FIELD(0, 78, 0x200, 0x10, 0, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt7629_pin_do_range[] = {
-+ PIN_FIELD(0, 78, 0x100, 0x10, 0, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt7629_pin_ies_range[] = {
-+ PIN_FIELD(0, 10, 0x1000, 0x10, 0, 1),
-+ PIN_FIELD(11, 18, 0x2000, 0x10, 0, 1),
-+ PIN_FIELD(19, 32, 0x3000, 0x10, 0, 1),
-+ PIN_FIELD(33, 48, 0x4000, 0x10, 0, 1),
-+ PIN_FIELD(49, 50, 0x5000, 0x10, 0, 1),
-+ PIN_FIELD(51, 69, 0x6000, 0x10, 0, 1),
-+ PIN_FIELD(70, 78, 0x7000, 0x10, 0, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt7629_pin_smt_range[] = {
-+ PIN_FIELD(0, 10, 0x1100, 0x10, 0, 1),
-+ PIN_FIELD(11, 18, 0x2100, 0x10, 0, 1),
-+ PIN_FIELD(19, 32, 0x3100, 0x10, 0, 1),
-+ PIN_FIELD(33, 48, 0x4100, 0x10, 0, 1),
-+ PIN_FIELD(49, 50, 0x5100, 0x10, 0, 1),
-+ PIN_FIELD(51, 69, 0x6100, 0x10, 0, 1),
-+ PIN_FIELD(70, 78, 0x7100, 0x10, 0, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt7629_pin_pullen_range[] = {
-+ PIN_FIELD(0, 10, 0x1400, 0x10, 0, 1),
-+ PIN_FIELD(11, 18, 0x2400, 0x10, 0, 1),
-+ PIN_FIELD(19, 32, 0x3400, 0x10, 0, 1),
-+ PIN_FIELD(33, 48, 0x4400, 0x10, 0, 1),
-+ PIN_FIELD(49, 50, 0x5400, 0x10, 0, 1),
-+ PIN_FIELD(51, 69, 0x6400, 0x10, 0, 1),
-+ PIN_FIELD(70, 78, 0x7400, 0x10, 0, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt7629_pin_pullsel_range[] = {
-+ PIN_FIELD(0, 10, 0x1500, 0x10, 0, 1),
-+ PIN_FIELD(11, 18, 0x2500, 0x10, 0, 1),
-+ PIN_FIELD(19, 32, 0x3500, 0x10, 0, 1),
-+ PIN_FIELD(33, 48, 0x4500, 0x10, 0, 1),
-+ PIN_FIELD(49, 50, 0x5500, 0x10, 0, 1),
-+ PIN_FIELD(51, 69, 0x6500, 0x10, 0, 1),
-+ PIN_FIELD(70, 78, 0x7500, 0x10, 0, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt7629_pin_drv_range[] = {
-+ PIN_FIELD(0, 10, 0x1600, 0x10, 0, 4),
-+ PIN_FIELD(11, 18, 0x2600, 0x10, 0, 4),
-+ PIN_FIELD(19, 32, 0x3600, 0x10, 0, 4),
-+ PIN_FIELD(33, 48, 0x4600, 0x10, 0, 4),
-+ PIN_FIELD(49, 50, 0x5600, 0x10, 0, 4),
-+ PIN_FIELD(51, 69, 0x6600, 0x10, 0, 4),
-+ PIN_FIELD(70, 78, 0x7600, 0x10, 0, 4),
-+};
-+
-+static const struct mtk_pin_field_calc mt7629_pin_tdsel_range[] = {
-+ PIN_FIELD(0, 10, 0x1200, 0x10, 0, 4),
-+ PIN_FIELD(11, 18, 0x2200, 0x10, 0, 4),
-+ PIN_FIELD(19, 32, 0x3200, 0x10, 0, 4),
-+ PIN_FIELD(33, 48, 0x4200, 0x10, 0, 4),
-+ PIN_FIELD(49, 50, 0x5200, 0x10, 0, 4),
-+ PIN_FIELD(51, 69, 0x6200, 0x10, 0, 4),
-+ PIN_FIELD(70, 78, 0x7200, 0x10, 0, 4),
-+};
-+
-+static const struct mtk_pin_field_calc mt7629_pin_rdsel_range[] = {
-+ PIN_FIELD(0, 10, 0x1300, 0x10, 0, 4),
-+ PIN_FIELD(11, 18, 0x2300, 0x10, 0, 4),
-+ PIN_FIELD(19, 32, 0x3300, 0x10, 0, 4),
-+ PIN_FIELD(33, 48, 0x4300, 0x10, 0, 4),
-+ PIN_FIELD(49, 50, 0x5300, 0x10, 0, 4),
-+ PIN_FIELD(51, 69, 0x6300, 0x10, 0, 4),
-+ PIN_FIELD(70, 78, 0x7300, 0x10, 0, 4),
-+};
-+
-+static const struct mtk_pin_reg_calc mt7629_reg_cals[] = {
-+ [PINCTRL_PIN_REG_MODE] = MTK_RANGE(mt7629_pin_mode_range),
-+ [PINCTRL_PIN_REG_DIR] = MTK_RANGE(mt7629_pin_dir_range),
-+ [PINCTRL_PIN_REG_DI] = MTK_RANGE(mt7629_pin_di_range),
-+ [PINCTRL_PIN_REG_DO] = MTK_RANGE(mt7629_pin_do_range),
-+ [PINCTRL_PIN_REG_IES] = MTK_RANGE(mt7629_pin_ies_range),
-+ [PINCTRL_PIN_REG_SMT] = MTK_RANGE(mt7629_pin_smt_range),
-+ [PINCTRL_PIN_REG_PULLSEL] = MTK_RANGE(mt7629_pin_pullsel_range),
-+ [PINCTRL_PIN_REG_PULLEN] = MTK_RANGE(mt7629_pin_pullen_range),
-+ [PINCTRL_PIN_REG_DRV] = MTK_RANGE(mt7629_pin_drv_range),
-+ [PINCTRL_PIN_REG_TDSEL] = MTK_RANGE(mt7629_pin_tdsel_range),
-+ [PINCTRL_PIN_REG_RDSEL] = MTK_RANGE(mt7629_pin_rdsel_range),
-+};
-+
-+static const struct mtk_pin_desc mt7629_pins[] = {
-+ MT7629_PIN(0, "TOP_5G_CLK", 53),
-+ MT7629_PIN(1, "TOP_5G_DATA", 54),
-+ MT7629_PIN(2, "WF0_5G_HB0", 55),
-+ MT7629_PIN(3, "WF0_5G_HB1", 56),
-+ MT7629_PIN(4, "WF0_5G_HB2", 57),
-+ MT7629_PIN(5, "WF0_5G_HB3", 58),
-+ MT7629_PIN(6, "WF0_5G_HB4", 59),
-+ MT7629_PIN(7, "WF0_5G_HB5", 60),
-+ MT7629_PIN(8, "WF0_5G_HB6", 61),
-+ MT7629_PIN(9, "XO_REQ", 9),
-+ MT7629_PIN(10, "TOP_RST_N", 10),
-+ MT7629_PIN(11, "SYS_WATCHDOG", 11),
-+ MT7629_PIN(12, "EPHY_LED0_N_JTDO", 12),
-+ MT7629_PIN(13, "EPHY_LED1_N_JTDI", 13),
-+ MT7629_PIN(14, "EPHY_LED2_N_JTMS", 14),
-+ MT7629_PIN(15, "EPHY_LED3_N_JTCLK", 15),
-+ MT7629_PIN(16, "EPHY_LED4_N_JTRST_N", 16),
-+ MT7629_PIN(17, "WF2G_LED_N", 17),
-+ MT7629_PIN(18, "WF5G_LED_N", 18),
-+ MT7629_PIN(19, "I2C_SDA", 19),
-+ MT7629_PIN(20, "I2C_SCL", 20),
-+ MT7629_PIN(21, "GPIO_9", 21),
-+ MT7629_PIN(22, "GPIO_10", 22),
-+ MT7629_PIN(23, "GPIO_11", 23),
-+ MT7629_PIN(24, "GPIO_12", 24),
-+ MT7629_PIN(25, "UART1_TXD", 25),
-+ MT7629_PIN(26, "UART1_RXD", 26),
-+ MT7629_PIN(27, "UART1_CTS", 27),
-+ MT7629_PIN(28, "UART1_RTS", 28),
-+ MT7629_PIN(29, "UART2_TXD", 29),
-+ MT7629_PIN(30, "UART2_RXD", 30),
-+ MT7629_PIN(31, "UART2_CTS", 31),
-+ MT7629_PIN(32, "UART2_RTS", 32),
-+ MT7629_PIN(33, "MDI_TP_P1", 33),
-+ MT7629_PIN(34, "MDI_TN_P1", 34),
-+ MT7629_PIN(35, "MDI_RP_P1", 35),
-+ MT7629_PIN(36, "MDI_RN_P1", 36),
-+ MT7629_PIN(37, "MDI_RP_P2", 37),
-+ MT7629_PIN(38, "MDI_RN_P2", 38),
-+ MT7629_PIN(39, "MDI_TP_P2", 39),
-+ MT7629_PIN(40, "MDI_TN_P2", 40),
-+ MT7629_PIN(41, "MDI_TP_P3", 41),
-+ MT7629_PIN(42, "MDI_TN_P3", 42),
-+ MT7629_PIN(43, "MDI_RP_P3", 43),
-+ MT7629_PIN(44, "MDI_RN_P3", 44),
-+ MT7629_PIN(45, "MDI_RP_P4", 45),
-+ MT7629_PIN(46, "MDI_RN_P4", 46),
-+ MT7629_PIN(47, "MDI_TP_P4", 47),
-+ MT7629_PIN(48, "MDI_TN_P4", 48),
-+ MT7629_PIN(49, "SMI_MDC", 49),
-+ MT7629_PIN(50, "SMI_MDIO", 50),
-+ MT7629_PIN(51, "PCIE_PERESET_N", 51),
-+ MT7629_PIN(52, "PWM_0", 52),
-+ MT7629_PIN(53, "GPIO_0", 0),
-+ MT7629_PIN(54, "GPIO_1", 1),
-+ MT7629_PIN(55, "GPIO_2", 2),
-+ MT7629_PIN(56, "GPIO_3", 3),
-+ MT7629_PIN(57, "GPIO_4", 4),
-+ MT7629_PIN(58, "GPIO_5", 5),
-+ MT7629_PIN(59, "GPIO_6", 6),
-+ MT7629_PIN(60, "GPIO_7", 7),
-+ MT7629_PIN(61, "GPIO_8", 8),
-+ MT7629_PIN(62, "SPI_CLK", 62),
-+ MT7629_PIN(63, "SPI_CS", 63),
-+ MT7629_PIN(64, "SPI_MOSI", 64),
-+ MT7629_PIN(65, "SPI_MISO", 65),
-+ MT7629_PIN(66, "SPI_WP", 66),
-+ MT7629_PIN(67, "SPI_HOLD", 67),
-+ MT7629_PIN(68, "UART0_TXD", 68),
-+ MT7629_PIN(69, "UART0_RXD", 69),
-+ MT7629_PIN(70, "TOP_2G_CLK", 70),
-+ MT7629_PIN(71, "TOP_2G_DATA", 71),
-+ MT7629_PIN(72, "WF0_2G_HB0", 72),
-+ MT7629_PIN(73, "WF0_2G_HB1", 73),
-+ MT7629_PIN(74, "WF0_2G_HB2", 74),
-+ MT7629_PIN(75, "WF0_2G_HB3", 75),
-+ MT7629_PIN(76, "WF0_2G_HB4", 76),
-+ MT7629_PIN(77, "WF0_2G_HB5", 77),
-+ MT7629_PIN(78, "WF0_2G_HB6", 78),
-+};
-+
-+/* List all groups consisting of these pins dedicated to the enablement of
-+ * certain hardware block and the corresponding mode for all of the pins.
-+ * The hardware probably has multiple combinations of these pinouts.
-+ */
-+
-+/* LED for EPHY */
-+static int mt7629_ephy_leds_pins[] = { 12, 13, 14, 15, 16, 17, 18, };
-+static int mt7629_ephy_leds_funcs[] = { 1, 1, 1, 1, 1, 1, 1, };
-+static int mt7629_ephy_led0_pins[] = { 12, };
-+static int mt7629_ephy_led0_funcs[] = { 1, };
-+static int mt7629_ephy_led1_pins[] = { 13, };
-+static int mt7629_ephy_led1_funcs[] = { 1, };
-+static int mt7629_ephy_led2_pins[] = { 14, };
-+static int mt7629_ephy_led2_funcs[] = { 1, };
-+static int mt7629_ephy_led3_pins[] = { 15, };
-+static int mt7629_ephy_led3_funcs[] = { 1, };
-+static int mt7629_ephy_led4_pins[] = { 16, };
-+static int mt7629_ephy_led4_funcs[] = { 1, };
-+static int mt7629_wf2g_led_pins[] = { 17, };
-+static int mt7629_wf2g_led_funcs[] = { 1, };
-+static int mt7629_wf5g_led_pins[] = { 18, };
-+static int mt7629_wf5g_led_funcs[] = { 1, };
-+
-+/* Watchdog */
-+static int mt7629_watchdog_pins[] = { 11, };
-+static int mt7629_watchdog_funcs[] = { 1, };
-+
-+/* LED for GPHY */
-+static int mt7629_gphy_leds_0_pins[] = { 21, 22, 23, };
-+static int mt7629_gphy_leds_0_funcs[] = { 2, 2, 2, };
-+static int mt7629_gphy_led1_0_pins[] = { 21, };
-+static int mt7629_gphy_led1_0_funcs[] = { 2, };
-+static int mt7629_gphy_led2_0_pins[] = { 22, };
-+static int mt7629_gphy_led2_0_funcs[] = { 2, };
-+static int mt7629_gphy_led3_0_pins[] = { 23, };
-+static int mt7629_gphy_led3_0_funcs[] = { 2, };
-+static int mt7629_gphy_leds_1_pins[] = { 57, 58, 59, };
-+static int mt7629_gphy_leds_1_funcs[] = { 1, 1, 1, };
-+static int mt7629_gphy_led1_1_pins[] = { 57, };
-+static int mt7629_gphy_led1_1_funcs[] = { 1, };
-+static int mt7629_gphy_led2_1_pins[] = { 58, };
-+static int mt7629_gphy_led2_1_funcs[] = { 1, };
-+static int mt7629_gphy_led3_1_pins[] = { 59, };
-+static int mt7629_gphy_led3_1_funcs[] = { 1, };
-+
-+/* I2C */
-+static int mt7629_i2c_0_pins[] = { 19, 20, };
-+static int mt7629_i2c_0_funcs[] = { 1, 1, };
-+static int mt7629_i2c_1_pins[] = { 53, 54, };
-+static int mt7629_i2c_1_funcs[] = { 1, 1, };
-+
-+/* SPI */
-+static int mt7629_spi_0_pins[] = { 21, 22, 23, 24, };
-+static int mt7629_spi_0_funcs[] = { 1, 1, 1, 1, };
-+static int mt7629_spi_1_pins[] = { 62, 63, 64, 65, };
-+static int mt7629_spi_1_funcs[] = { 1, 1, 1, 1, };
-+static int mt7629_spi_wp_pins[] = { 66, };
-+static int mt7629_spi_wp_funcs[] = { 1, };
-+static int mt7629_spi_hold_pins[] = { 67, };
-+static int mt7629_spi_hold_funcs[] = { 1, };
-+
-+/* UART */
-+static int mt7629_uart1_0_txd_rxd_pins[] = { 25, 26, };
-+static int mt7629_uart1_0_txd_rxd_funcs[] = { 1, 1, };
-+static int mt7629_uart1_1_txd_rxd_pins[] = { 53, 54, };
-+static int mt7629_uart1_1_txd_rxd_funcs[] = { 2, 2, };
-+static int mt7629_uart2_0_txd_rxd_pins[] = { 29, 30, };
-+static int mt7629_uart2_0_txd_rxd_funcs[] = { 1, 1, };
-+static int mt7629_uart2_1_txd_rxd_pins[] = { 57, 58, };
-+static int mt7629_uart2_1_txd_rxd_funcs[] = { 2, 2, };
-+static int mt7629_uart1_0_cts_rts_pins[] = { 27, 28, };
-+static int mt7629_uart1_0_cts_rts_funcs[] = { 1, 1, };
-+static int mt7629_uart1_1_cts_rts_pins[] = { 55, 56, };
-+static int mt7629_uart1_1_cts_rts_funcs[] = { 2, 2, };
-+static int mt7629_uart2_0_cts_rts_pins[] = { 31, 32, };
-+static int mt7629_uart2_0_cts_rts_funcs[] = { 1, 1, };
-+static int mt7629_uart2_1_cts_rts_pins[] = { 59, 60, };
-+static int mt7629_uart2_1_cts_rts_funcs[] = { 2, 2, };
-+static int mt7629_uart0_txd_rxd_pins[] = { 68, 69, };
-+static int mt7629_uart0_txd_rxd_funcs[] = { 1, 1, };
-+
-+/* MDC/MDIO */
-+static int mt7629_mdc_mdio_pins[] = { 49, 50, };
-+static int mt7629_mdc_mdio_funcs[] = { 1, 1, };
-+
-+/* PCIE */
-+static int mt7629_pcie_pereset_pins[] = { 51, };
-+static int mt7629_pcie_pereset_funcs[] = { 1, };
-+static int mt7629_pcie_wake_pins[] = { 55, };
-+static int mt7629_pcie_wake_funcs[] = { 1, };
-+static int mt7629_pcie_clkreq_pins[] = { 56, };
-+static int mt7629_pcie_clkreq_funcs[] = { 1, };
-+
-+/* PWM */
-+static int mt7629_pwm_0_pins[] = { 52, };
-+static int mt7629_pwm_0_funcs[] = { 1, };
-+static int mt7629_pwm_1_pins[] = { 61, };
-+static int mt7629_pwm_1_funcs[] = { 2, };
-+
-+/* WF 2G */
-+static int mt7629_wf0_2g_pins[] = { 70, 71, 72, 73, 74, 75, 76, 77, 78, };
-+static int mt7629_wf0_2g_funcs[] = { 1, 1, 1, 1, 1, 1, 1, 1, };
-+
-+/* WF 5G */
-+static int mt7629_wf0_5g_pins[] = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, };
-+static int mt7629_wf0_5g_funcs[] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, };
-+
-+/* SNFI */
-+static int mt7629_snfi_pins[] = { 62, 63, 64, 65, 66, 67 };
-+static int mt7629_snfi_funcs[] = { 2, 2, 2, 2, 2, 2 };
-+
-+/* SPI NOR */
-+static int mt7629_snor_pins[] = { 62, 63, 64, 65, 66, 67 };
-+static int mt7629_snor_funcs[] = { 1, 1, 1, 1, 1, 1 };
-+
-+static const struct group_desc mt7629_groups[] = {
-+ PINCTRL_PIN_GROUP("ephy_leds", mt7629_ephy_leds),
-+ PINCTRL_PIN_GROUP("ephy_led0", mt7629_ephy_led0),
-+ PINCTRL_PIN_GROUP("ephy_led1", mt7629_ephy_led1),
-+ PINCTRL_PIN_GROUP("ephy_led2", mt7629_ephy_led2),
-+ PINCTRL_PIN_GROUP("ephy_led3", mt7629_ephy_led3),
-+ PINCTRL_PIN_GROUP("ephy_led4", mt7629_ephy_led4),
-+ PINCTRL_PIN_GROUP("wf2g_led", mt7629_wf2g_led),
-+ PINCTRL_PIN_GROUP("wf5g_led", mt7629_wf5g_led),
-+ PINCTRL_PIN_GROUP("watchdog", mt7629_watchdog),
-+ PINCTRL_PIN_GROUP("gphy_leds_0", mt7629_gphy_leds_0),
-+ PINCTRL_PIN_GROUP("gphy_led1_0", mt7629_gphy_led1_0),
-+ PINCTRL_PIN_GROUP("gphy_led2_0", mt7629_gphy_led2_0),
-+ PINCTRL_PIN_GROUP("gphy_led3_0", mt7629_gphy_led3_0),
-+ PINCTRL_PIN_GROUP("gphy_leds_1", mt7629_gphy_leds_1),
-+ PINCTRL_PIN_GROUP("gphy_led1_1", mt7629_gphy_led1_1),
-+ PINCTRL_PIN_GROUP("gphy_led2_1", mt7629_gphy_led2_1),
-+ PINCTRL_PIN_GROUP("gphy_led3_1", mt7629_gphy_led3_1),
-+ PINCTRL_PIN_GROUP("i2c_0", mt7629_i2c_0),
-+ PINCTRL_PIN_GROUP("i2c_1", mt7629_i2c_1),
-+ PINCTRL_PIN_GROUP("spi_0", mt7629_spi_0),
-+ PINCTRL_PIN_GROUP("spi_1", mt7629_spi_1),
-+ PINCTRL_PIN_GROUP("spi_wp", mt7629_spi_wp),
-+ PINCTRL_PIN_GROUP("spi_hold", mt7629_spi_hold),
-+ PINCTRL_PIN_GROUP("uart1_0_txd_rxd", mt7629_uart1_0_txd_rxd),
-+ PINCTRL_PIN_GROUP("uart1_1_txd_rxd", mt7629_uart1_1_txd_rxd),
-+ PINCTRL_PIN_GROUP("uart2_0_txd_rxd", mt7629_uart2_0_txd_rxd),
-+ PINCTRL_PIN_GROUP("uart2_1_txd_rxd", mt7629_uart2_1_txd_rxd),
-+ PINCTRL_PIN_GROUP("uart1_0_cts_rts", mt7629_uart1_0_cts_rts),
-+ PINCTRL_PIN_GROUP("uart1_1_cts_rts", mt7629_uart1_1_cts_rts),
-+ PINCTRL_PIN_GROUP("uart2_0_cts_rts", mt7629_uart2_0_cts_rts),
-+ PINCTRL_PIN_GROUP("uart2_1_cts_rts", mt7629_uart2_1_cts_rts),
-+ PINCTRL_PIN_GROUP("uart0_txd_rxd", mt7629_uart0_txd_rxd),
-+ PINCTRL_PIN_GROUP("mdc_mdio", mt7629_mdc_mdio),
-+ PINCTRL_PIN_GROUP("pcie_pereset", mt7629_pcie_pereset),
-+ PINCTRL_PIN_GROUP("pcie_wake", mt7629_pcie_wake),
-+ PINCTRL_PIN_GROUP("pcie_clkreq", mt7629_pcie_clkreq),
-+ PINCTRL_PIN_GROUP("pwm_0", mt7629_pwm_0),
-+ PINCTRL_PIN_GROUP("pwm_1", mt7629_pwm_1),
-+ PINCTRL_PIN_GROUP("wf0_5g", mt7629_wf0_5g),
-+ PINCTRL_PIN_GROUP("wf0_2g", mt7629_wf0_2g),
-+ PINCTRL_PIN_GROUP("snfi", mt7629_snfi),
-+ PINCTRL_PIN_GROUP("spi_nor", mt7629_snor),
-+};
-+
-+/* Joint those groups owning the same capability in user point of view which
-+ * allows that people tend to use through the device tree.
-+ */
-+static const char *mt7629_ethernet_groups[] = { "mdc_mdio", };
-+static const char *mt7629_i2c_groups[] = { "i2c_0", "i2c_1", };
-+static const char *mt7629_led_groups[] = { "ephy_leds", "ephy_led0",
-+ "ephy_led1", "ephy_led2",
-+ "ephy_led3", "ephy_led4",
-+ "wf2g_led", "wf5g_led",
-+ "gphy_leds_0", "gphy_led1_0",
-+ "gphy_led2_0", "gphy_led3_0",
-+ "gphy_leds_1", "gphy_led1_1",
-+ "gphy_led2_1", "gphy_led3_1",};
-+static const char *mt7629_pcie_groups[] = { "pcie_pereset", "pcie_wake",
-+ "pcie_clkreq", };
-+static const char *mt7629_pwm_groups[] = { "pwm_0", "pwm_1", };
-+static const char *mt7629_spi_groups[] = { "spi_0", "spi_1", "spi_wp",
-+ "spi_hold", };
-+static const char *mt7629_uart_groups[] = { "uart1_0_txd_rxd",
-+ "uart1_1_txd_rxd",
-+ "uart2_0_txd_rxd",
-+ "uart2_1_txd_rxd",
-+ "uart1_0_cts_rts",
-+ "uart1_1_cts_rts",
-+ "uart2_0_cts_rts",
-+ "uart2_1_cts_rts",
-+ "uart0_txd_rxd", };
-+static const char *mt7629_wdt_groups[] = { "watchdog", };
-+static const char *mt7629_wifi_groups[] = { "wf0_5g", "wf0_2g", };
-+static const char *mt7629_flash_groups[] = { "snfi", "spi_nor" };
-+
-+static const struct function_desc mt7629_functions[] = {
-+ {"eth", mt7629_ethernet_groups, ARRAY_SIZE(mt7629_ethernet_groups)},
-+ {"i2c", mt7629_i2c_groups, ARRAY_SIZE(mt7629_i2c_groups)},
-+ {"led", mt7629_led_groups, ARRAY_SIZE(mt7629_led_groups)},
-+ {"pcie", mt7629_pcie_groups, ARRAY_SIZE(mt7629_pcie_groups)},
-+ {"pwm", mt7629_pwm_groups, ARRAY_SIZE(mt7629_pwm_groups)},
-+ {"spi", mt7629_spi_groups, ARRAY_SIZE(mt7629_spi_groups)},
-+ {"uart", mt7629_uart_groups, ARRAY_SIZE(mt7629_uart_groups)},
-+ {"watchdog", mt7629_wdt_groups, ARRAY_SIZE(mt7629_wdt_groups)},
-+ {"wifi", mt7629_wifi_groups, ARRAY_SIZE(mt7629_wifi_groups)},
-+ {"flash", mt7629_flash_groups, ARRAY_SIZE(mt7629_flash_groups)},
-+};
-+
-+static const struct mtk_eint_hw mt7629_eint_hw = {
-+ .port_mask = 7,
-+ .ports = 7,
-+ .ap_num = ARRAY_SIZE(mt7629_pins),
-+ .db_cnt = 16,
-+};
-+
-+static struct mtk_pin_soc mt7629_data = {
-+ .reg_cal = mt7629_reg_cals,
-+ .pins = mt7629_pins,
-+ .npins = ARRAY_SIZE(mt7629_pins),
-+ .grps = mt7629_groups,
-+ .ngrps = ARRAY_SIZE(mt7629_groups),
-+ .funcs = mt7629_functions,
-+ .nfuncs = ARRAY_SIZE(mt7629_functions),
-+ .eint_hw = &mt7629_eint_hw,
-+ .gpio_m = 0,
-+ .ies_present = true,
-+ .base_names = mtk_default_register_base_names,
-+ .nbase_names = ARRAY_SIZE(mtk_default_register_base_names),
-+ .bias_disable_set = mtk_pinconf_bias_disable_set_rev1,
-+ .bias_disable_get = mtk_pinconf_bias_disable_get_rev1,
-+ .bias_set = mtk_pinconf_bias_set_rev1,
-+ .bias_get = mtk_pinconf_bias_get_rev1,
-+ .drive_set = mtk_pinconf_drive_set_rev1,
-+ .drive_get = mtk_pinconf_drive_get_rev1,
-+};
-+
-+static const struct of_device_id mt7629_pinctrl_of_match[] = {
-+ { .compatible = "mediatek,mt7629-pinctrl", },
-+ {}
-+};
-+
-+static int mt7629_pinctrl_probe(struct platform_device *pdev)
-+{
-+ return mtk_moore_pinctrl_probe(pdev, &mt7629_data);
-+}
-+
-+static struct platform_driver mt7629_pinctrl_driver = {
-+ .driver = {
-+ .name = "mt7629-pinctrl",
-+ .of_match_table = mt7629_pinctrl_of_match,
-+ },
-+ .probe = mt7629_pinctrl_probe,
-+};
-+
-+static int __init mt7629_pinctrl_init(void)
-+{
-+ return platform_driver_register(&mt7629_pinctrl_driver);
-+}
-+arch_initcall(mt7629_pinctrl_init);
---- /dev/null
-+++ b/drivers/pinctrl/mediatek/pinctrl-mt8183.c
-@@ -0,0 +1,595 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (C) 2018 MediaTek Inc.
-+ *
-+ * Author: Zhiyong Tao <zhiyong.tao@mediatek.com>
-+ *
-+ */
-+
-+#include "pinctrl-mtk-mt8183.h"
-+#include "pinctrl-paris.h"
-+
-+/* MT8183 have multiple bases to program pin configuration listed as the below:
-+ * iocfg[0]:0x10005000, iocfg[1]:0x11F20000, iocfg[2]:0x11E80000,
-+ * iocfg[3]:0x11E70000, iocfg[4]:0x11E90000, iocfg[5]:0x11D30000,
-+ * iocfg[6]:0x11D20000, iocfg[7]:0x11C50000, iocfg[8]:0x11F30000.
-+ * _i_based could be used to indicate what base the pin should be mapped into.
-+ */
-+
-+#define PIN_FIELD_BASE(_s_pin, _e_pin, _i_base, _s_addr, _x_addrs, _s_bit, _x_bits) \
-+ PIN_FIELD_CALC(_s_pin, _e_pin, _i_base, _s_addr, _x_addrs, _s_bit, \
-+ _x_bits, 32, 0)
-+
-+#define PINS_FIELD_BASE(_s_pin, _e_pin, _i_base, _s_addr, _x_addrs, _s_bit, _x_bits) \
-+ PIN_FIELD_CALC(_s_pin, _e_pin, _i_base, _s_addr, _x_addrs, _s_bit, \
-+ _x_bits, 32, 1)
-+
-+static const struct mtk_pin_field_calc mt8183_pin_mode_range[] = {
-+ PIN_FIELD(0, 192, 0x300, 0x10, 0, 4),
-+};
-+
-+static const struct mtk_pin_field_calc mt8183_pin_dir_range[] = {
-+ PIN_FIELD(0, 192, 0x0, 0x10, 0, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt8183_pin_di_range[] = {
-+ PIN_FIELD(0, 192, 0x200, 0x10, 0, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt8183_pin_do_range[] = {
-+ PIN_FIELD(0, 192, 0x100, 0x10, 0, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt8183_pin_ies_range[] = {
-+ PINS_FIELD_BASE(0, 3, 6, 0x000, 0x10, 3, 1),
-+ PINS_FIELD_BASE(4, 7, 6, 0x000, 0x10, 5, 1),
-+ PIN_FIELD_BASE(8, 8, 6, 0x000, 0x10, 0, 1),
-+ PINS_FIELD_BASE(9, 10, 6, 0x000, 0x10, 12, 1),
-+ PIN_FIELD_BASE(11, 11, 1, 0x000, 0x10, 3, 1),
-+ PIN_FIELD_BASE(12, 12, 1, 0x000, 0x10, 7, 1),
-+ PINS_FIELD_BASE(13, 16, 2, 0x000, 0x10, 2, 1),
-+ PINS_FIELD_BASE(17, 20, 2, 0x000, 0x10, 3, 1),
-+ PINS_FIELD_BASE(21, 24, 2, 0x000, 0x10, 4, 1),
-+ PINS_FIELD_BASE(25, 28, 2, 0x000, 0x10, 5, 1),
-+ PIN_FIELD_BASE(29, 29, 2, 0x000, 0x10, 6, 1),
-+ PIN_FIELD_BASE(30, 30, 2, 0x000, 0x10, 7, 1),
-+ PINS_FIELD_BASE(31, 31, 2, 0x000, 0x10, 8, 1),
-+ PINS_FIELD_BASE(32, 34, 2, 0x000, 0x10, 7, 1),
-+ PINS_FIELD_BASE(35, 37, 3, 0x000, 0x10, 0, 1),
-+ PINS_FIELD_BASE(38, 40, 3, 0x000, 0x10, 1, 1),
-+ PINS_FIELD_BASE(41, 42, 3, 0x000, 0x10, 2, 1),
-+ PINS_FIELD_BASE(43, 45, 3, 0x000, 0x10, 3, 1),
-+ PINS_FIELD_BASE(46, 47, 3, 0x000, 0x10, 4, 1),
-+ PINS_FIELD_BASE(48, 49, 3, 0x000, 0x10, 5, 1),
-+ PINS_FIELD_BASE(50, 51, 4, 0x000, 0x10, 0, 1),
-+ PINS_FIELD_BASE(52, 57, 4, 0x000, 0x10, 1, 1),
-+ PINS_FIELD_BASE(58, 60, 4, 0x000, 0x10, 2, 1),
-+ PINS_FIELD_BASE(61, 64, 5, 0x000, 0x10, 0, 1),
-+ PINS_FIELD_BASE(65, 66, 5, 0x000, 0x10, 1, 1),
-+ PINS_FIELD_BASE(67, 68, 5, 0x000, 0x10, 2, 1),
-+ PINS_FIELD_BASE(69, 71, 5, 0x000, 0x10, 3, 1),
-+ PINS_FIELD_BASE(72, 76, 5, 0x000, 0x10, 4, 1),
-+ PINS_FIELD_BASE(77, 80, 5, 0x000, 0x10, 5, 1),
-+ PIN_FIELD_BASE(81, 81, 5, 0x000, 0x10, 6, 1),
-+ PINS_FIELD_BASE(82, 83, 5, 0x000, 0x10, 7, 1),
-+ PIN_FIELD_BASE(84, 84, 5, 0x000, 0x10, 6, 1),
-+ PINS_FIELD_BASE(85, 88, 5, 0x000, 0x10, 8, 1),
-+ PIN_FIELD_BASE(89, 89, 6, 0x000, 0x10, 11, 1),
-+ PIN_FIELD_BASE(90, 90, 6, 0x000, 0x10, 1, 1),
-+ PINS_FIELD_BASE(91, 94, 6, 0x000, 0x10, 2, 1),
-+ PINS_FIELD_BASE(95, 96, 6, 0x000, 0x10, 6, 1),
-+ PINS_FIELD_BASE(97, 98, 6, 0x000, 0x10, 7, 1),
-+ PIN_FIELD_BASE(99, 99, 6, 0x000, 0x10, 8, 1),
-+ PIN_FIELD_BASE(100, 100, 6, 0x000, 0x10, 9, 1),
-+ PINS_FIELD_BASE(101, 102, 6, 0x000, 0x10, 10, 1),
-+ PINS_FIELD_BASE(103, 104, 6, 0x000, 0x10, 13, 1),
-+ PINS_FIELD_BASE(105, 106, 6, 0x000, 0x10, 14, 1),
-+ PIN_FIELD_BASE(107, 107, 7, 0x000, 0x10, 0, 1),
-+ PIN_FIELD_BASE(108, 108, 7, 0x000, 0x10, 1, 1),
-+ PIN_FIELD_BASE(109, 109, 7, 0x000, 0x10, 2, 1),
-+ PIN_FIELD_BASE(110, 110, 7, 0x000, 0x10, 0, 1),
-+ PIN_FIELD_BASE(111, 111, 7, 0x000, 0x10, 3, 1),
-+ PIN_FIELD_BASE(112, 112, 7, 0x000, 0x10, 2, 1),
-+ PIN_FIELD_BASE(113, 113, 7, 0x000, 0x10, 4, 1),
-+ PIN_FIELD_BASE(114, 114, 7, 0x000, 0x10, 5, 1),
-+ PIN_FIELD_BASE(115, 115, 7, 0x000, 0x10, 6, 1),
-+ PIN_FIELD_BASE(116, 116, 7, 0x000, 0x10, 7, 1),
-+ PIN_FIELD_BASE(117, 117, 7, 0x000, 0x10, 8, 1),
-+ PIN_FIELD_BASE(118, 118, 7, 0x000, 0x10, 9, 1),
-+ PIN_FIELD_BASE(119, 119, 7, 0x000, 0x10, 10, 1),
-+ PIN_FIELD_BASE(120, 120, 7, 0x000, 0x10, 11, 1),
-+ PIN_FIELD_BASE(121, 121, 7, 0x000, 0x10, 12, 1),
-+ PIN_FIELD_BASE(122, 122, 8, 0x000, 0x10, 0, 1),
-+ PIN_FIELD_BASE(123, 123, 8, 0x000, 0x10, 1, 1),
-+ PIN_FIELD_BASE(124, 124, 8, 0x000, 0x10, 2, 1),
-+ PINS_FIELD_BASE(125, 130, 8, 0x000, 0x10, 1, 1),
-+ PIN_FIELD_BASE(131, 131, 8, 0x000, 0x10, 3, 1),
-+ PIN_FIELD_BASE(132, 132, 8, 0x000, 0x10, 1, 1),
-+ PIN_FIELD_BASE(133, 133, 8, 0x000, 0x10, 4, 1),
-+ PIN_FIELD_BASE(134, 134, 1, 0x000, 0x10, 0, 1),
-+ PIN_FIELD_BASE(135, 135, 1, 0x000, 0x10, 1, 1),
-+ PINS_FIELD_BASE(136, 143, 1, 0x000, 0x10, 2, 1),
-+ PINS_FIELD_BASE(144, 147, 1, 0x000, 0x10, 4, 1),
-+ PIN_FIELD_BASE(148, 148, 1, 0x000, 0x10, 5, 1),
-+ PIN_FIELD_BASE(149, 149, 1, 0x000, 0x10, 6, 1),
-+ PINS_FIELD_BASE(150, 153, 1, 0x000, 0x10, 8, 1),
-+ PIN_FIELD_BASE(154, 154, 1, 0x000, 0x10, 9, 1),
-+ PINS_FIELD_BASE(155, 157, 1, 0x000, 0x10, 10, 1),
-+ PINS_FIELD_BASE(158, 160, 1, 0x000, 0x10, 8, 1),
-+ PINS_FIELD_BASE(161, 164, 2, 0x000, 0x10, 0, 1),
-+ PINS_FIELD_BASE(165, 166, 2, 0x000, 0x10, 1, 1),
-+ PINS_FIELD_BASE(167, 168, 4, 0x000, 0x10, 2, 1),
-+ PIN_FIELD_BASE(169, 169, 4, 0x000, 0x10, 3, 1),
-+ PINS_FIELD_BASE(170, 174, 4, 0x000, 0x10, 4, 1),
-+ PINS_FIELD_BASE(175, 176, 4, 0x000, 0x10, 3, 1),
-+ PINS_FIELD_BASE(177, 179, 6, 0x000, 0x10, 4, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt8183_pin_smt_range[] = {
-+ PINS_FIELD_BASE(0, 3, 6, 0x010, 0x10, 3, 1),
-+ PINS_FIELD_BASE(4, 7, 6, 0x010, 0x10, 5, 1),
-+ PIN_FIELD_BASE(8, 8, 6, 0x010, 0x10, 0, 1),
-+ PINS_FIELD_BASE(9, 10, 6, 0x010, 0x10, 12, 1),
-+ PIN_FIELD_BASE(11, 11, 1, 0x010, 0x10, 3, 1),
-+ PIN_FIELD_BASE(12, 12, 1, 0x010, 0x10, 7, 1),
-+ PINS_FIELD_BASE(13, 16, 2, 0x010, 0x10, 2, 1),
-+ PINS_FIELD_BASE(17, 20, 2, 0x010, 0x10, 3, 1),
-+ PINS_FIELD_BASE(21, 24, 2, 0x010, 0x10, 4, 1),
-+ PINS_FIELD_BASE(25, 28, 2, 0x010, 0x10, 5, 1),
-+ PIN_FIELD_BASE(29, 29, 2, 0x010, 0x10, 6, 1),
-+ PIN_FIELD_BASE(30, 30, 2, 0x010, 0x10, 7, 1),
-+ PINS_FIELD_BASE(31, 31, 2, 0x010, 0x10, 8, 1),
-+ PINS_FIELD_BASE(32, 34, 2, 0x010, 0x10, 7, 1),
-+ PINS_FIELD_BASE(35, 37, 3, 0x010, 0x10, 0, 1),
-+ PINS_FIELD_BASE(38, 40, 3, 0x010, 0x10, 1, 1),
-+ PINS_FIELD_BASE(41, 42, 3, 0x010, 0x10, 2, 1),
-+ PINS_FIELD_BASE(43, 45, 3, 0x010, 0x10, 3, 1),
-+ PINS_FIELD_BASE(46, 47, 3, 0x010, 0x10, 4, 1),
-+ PINS_FIELD_BASE(48, 49, 3, 0x010, 0x10, 5, 1),
-+ PINS_FIELD_BASE(50, 51, 4, 0x010, 0x10, 0, 1),
-+ PINS_FIELD_BASE(52, 57, 4, 0x010, 0x10, 1, 1),
-+ PINS_FIELD_BASE(58, 60, 4, 0x010, 0x10, 2, 1),
-+ PINS_FIELD_BASE(61, 64, 5, 0x010, 0x10, 0, 1),
-+ PINS_FIELD_BASE(65, 66, 5, 0x010, 0x10, 1, 1),
-+ PINS_FIELD_BASE(67, 68, 5, 0x010, 0x10, 2, 1),
-+ PINS_FIELD_BASE(69, 71, 5, 0x010, 0x10, 3, 1),
-+ PINS_FIELD_BASE(72, 76, 5, 0x010, 0x10, 4, 1),
-+ PINS_FIELD_BASE(77, 80, 5, 0x010, 0x10, 5, 1),
-+ PIN_FIELD_BASE(81, 81, 5, 0x010, 0x10, 6, 1),
-+ PINS_FIELD_BASE(82, 83, 5, 0x010, 0x10, 7, 1),
-+ PIN_FIELD_BASE(84, 84, 5, 0x010, 0x10, 6, 1),
-+ PINS_FIELD_BASE(85, 88, 5, 0x010, 0x10, 8, 1),
-+ PIN_FIELD_BASE(89, 89, 6, 0x010, 0x10, 11, 1),
-+ PIN_FIELD_BASE(90, 90, 6, 0x010, 0x10, 1, 1),
-+ PINS_FIELD_BASE(91, 94, 6, 0x010, 0x10, 2, 1),
-+ PINS_FIELD_BASE(95, 96, 6, 0x010, 0x10, 6, 1),
-+ PINS_FIELD_BASE(97, 98, 6, 0x010, 0x10, 7, 1),
-+ PIN_FIELD_BASE(99, 99, 6, 0x010, 0x10, 8, 1),
-+ PIN_FIELD_BASE(100, 100, 6, 0x010, 0x10, 9, 1),
-+ PINS_FIELD_BASE(101, 102, 6, 0x010, 0x10, 10, 1),
-+ PINS_FIELD_BASE(103, 104, 6, 0x010, 0x10, 13, 1),
-+ PINS_FIELD_BASE(105, 106, 6, 0x010, 0x10, 14, 1),
-+ PIN_FIELD_BASE(107, 107, 7, 0x010, 0x10, 0, 1),
-+ PIN_FIELD_BASE(108, 108, 7, 0x010, 0x10, 1, 1),
-+ PIN_FIELD_BASE(109, 109, 7, 0x010, 0x10, 2, 1),
-+ PIN_FIELD_BASE(110, 110, 7, 0x010, 0x10, 0, 1),
-+ PIN_FIELD_BASE(111, 111, 7, 0x010, 0x10, 3, 1),
-+ PIN_FIELD_BASE(112, 112, 7, 0x010, 0x10, 2, 1),
-+ PIN_FIELD_BASE(113, 113, 7, 0x010, 0x10, 4, 1),
-+ PIN_FIELD_BASE(114, 114, 7, 0x010, 0x10, 5, 1),
-+ PIN_FIELD_BASE(115, 115, 7, 0x010, 0x10, 6, 1),
-+ PIN_FIELD_BASE(116, 116, 7, 0x010, 0x10, 7, 1),
-+ PIN_FIELD_BASE(117, 117, 7, 0x010, 0x10, 8, 1),
-+ PIN_FIELD_BASE(118, 118, 7, 0x010, 0x10, 9, 1),
-+ PIN_FIELD_BASE(119, 119, 7, 0x010, 0x10, 10, 1),
-+ PIN_FIELD_BASE(120, 120, 7, 0x010, 0x10, 11, 1),
-+ PIN_FIELD_BASE(121, 121, 7, 0x010, 0x10, 12, 1),
-+ PIN_FIELD_BASE(122, 122, 8, 0x010, 0x10, 0, 1),
-+ PIN_FIELD_BASE(123, 123, 8, 0x010, 0x10, 1, 1),
-+ PIN_FIELD_BASE(124, 124, 8, 0x010, 0x10, 2, 1),
-+ PINS_FIELD_BASE(125, 130, 8, 0x010, 0x10, 1, 1),
-+ PIN_FIELD_BASE(131, 131, 8, 0x010, 0x10, 3, 1),
-+ PIN_FIELD_BASE(132, 132, 8, 0x010, 0x10, 1, 1),
-+ PIN_FIELD_BASE(133, 133, 8, 0x010, 0x10, 4, 1),
-+ PIN_FIELD_BASE(134, 134, 1, 0x010, 0x10, 0, 1),
-+ PIN_FIELD_BASE(135, 135, 1, 0x010, 0x10, 1, 1),
-+ PINS_FIELD_BASE(136, 143, 1, 0x010, 0x10, 2, 1),
-+ PINS_FIELD_BASE(144, 147, 1, 0x010, 0x10, 4, 1),
-+ PIN_FIELD_BASE(148, 148, 1, 0x010, 0x10, 5, 1),
-+ PIN_FIELD_BASE(149, 149, 1, 0x010, 0x10, 6, 1),
-+ PINS_FIELD_BASE(150, 153, 1, 0x010, 0x10, 8, 1),
-+ PIN_FIELD_BASE(154, 154, 1, 0x010, 0x10, 9, 1),
-+ PINS_FIELD_BASE(155, 157, 1, 0x010, 0x10, 10, 1),
-+ PINS_FIELD_BASE(158, 160, 1, 0x010, 0x10, 8, 1),
-+ PINS_FIELD_BASE(161, 164, 2, 0x010, 0x10, 0, 1),
-+ PINS_FIELD_BASE(165, 166, 2, 0x010, 0x10, 1, 1),
-+ PINS_FIELD_BASE(167, 168, 4, 0x010, 0x10, 2, 1),
-+ PIN_FIELD_BASE(169, 169, 4, 0x010, 0x10, 3, 1),
-+ PINS_FIELD_BASE(170, 174, 4, 0x010, 0x10, 4, 1),
-+ PINS_FIELD_BASE(175, 176, 4, 0x010, 0x10, 3, 1),
-+ PINS_FIELD_BASE(177, 179, 6, 0x010, 0x10, 4, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt8183_pin_pullen_range[] = {
-+ PIN_FIELD_BASE(0, 3, 6, 0x060, 0x10, 6, 1),
-+ PIN_FIELD_BASE(4, 7, 6, 0x060, 0x10, 11, 1),
-+ PIN_FIELD_BASE(8, 8, 6, 0x060, 0x10, 0, 1),
-+ PIN_FIELD_BASE(9, 10, 6, 0x060, 0x10, 26, 1),
-+ PIN_FIELD_BASE(11, 11, 1, 0x060, 0x10, 10, 1),
-+ PIN_FIELD_BASE(12, 12, 1, 0x060, 0x10, 17, 1),
-+ PIN_FIELD_BASE(13, 28, 2, 0x060, 0x10, 6, 1),
-+ PIN_FIELD_BASE(43, 49, 3, 0x060, 0x10, 8, 1),
-+ PIN_FIELD_BASE(50, 60, 4, 0x060, 0x10, 0, 1),
-+ PIN_FIELD_BASE(61, 88, 5, 0x060, 0x10, 0, 1),
-+ PIN_FIELD_BASE(89, 89, 6, 0x060, 0x10, 24, 1),
-+ PIN_FIELD_BASE(90, 90, 6, 0x060, 0x10, 1, 1),
-+ PIN_FIELD_BASE(95, 95, 6, 0x060, 0x10, 15, 1),
-+ PIN_FIELD_BASE(96, 102, 6, 0x060, 0x10, 17, 1),
-+ PIN_FIELD_BASE(103, 106, 6, 0x060, 0x10, 28, 1),
-+ PIN_FIELD_BASE(107, 121, 7, 0x060, 0x10, 0, 1),
-+ PIN_FIELD_BASE(134, 143, 1, 0x060, 0x10, 0, 1),
-+ PIN_FIELD_BASE(144, 149, 1, 0x060, 0x10, 11, 1),
-+ PIN_FIELD_BASE(150, 160, 1, 0x060, 0x10, 18, 1),
-+ PIN_FIELD_BASE(161, 166, 2, 0x060, 0x10, 0, 1),
-+ PIN_FIELD_BASE(167, 176, 4, 0x060, 0x10, 11, 1),
-+ PIN_FIELD_BASE(177, 177, 6, 0x060, 0x10, 10, 1),
-+ PIN_FIELD_BASE(178, 178, 6, 0x060, 0x10, 16, 1),
-+ PIN_FIELD_BASE(179, 179, 6, 0x060, 0x10, 25, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt8183_pin_pullsel_range[] = {
-+ PIN_FIELD_BASE(0, 3, 6, 0x080, 0x10, 6, 1),
-+ PIN_FIELD_BASE(4, 7, 6, 0x080, 0x10, 11, 1),
-+ PIN_FIELD_BASE(8, 8, 6, 0x080, 0x10, 0, 1),
-+ PIN_FIELD_BASE(9, 10, 6, 0x080, 0x10, 26, 1),
-+ PIN_FIELD_BASE(11, 11, 1, 0x080, 0x10, 10, 1),
-+ PIN_FIELD_BASE(12, 12, 1, 0x080, 0x10, 17, 1),
-+ PIN_FIELD_BASE(13, 28, 2, 0x080, 0x10, 6, 1),
-+ PIN_FIELD_BASE(43, 49, 3, 0x080, 0x10, 8, 1),
-+ PIN_FIELD_BASE(50, 60, 4, 0x080, 0x10, 0, 1),
-+ PIN_FIELD_BASE(61, 88, 5, 0x080, 0x10, 0, 1),
-+ PIN_FIELD_BASE(89, 89, 6, 0x080, 0x10, 24, 1),
-+ PIN_FIELD_BASE(90, 90, 6, 0x080, 0x10, 1, 1),
-+ PIN_FIELD_BASE(95, 95, 6, 0x080, 0x10, 15, 1),
-+ PIN_FIELD_BASE(96, 102, 6, 0x080, 0x10, 17, 1),
-+ PIN_FIELD_BASE(103, 106, 6, 0x080, 0x10, 28, 1),
-+ PIN_FIELD_BASE(107, 121, 7, 0x080, 0x10, 0, 1),
-+ PIN_FIELD_BASE(134, 143, 1, 0x080, 0x10, 0, 1),
-+ PIN_FIELD_BASE(144, 149, 1, 0x080, 0x10, 11, 1),
-+ PIN_FIELD_BASE(150, 160, 1, 0x080, 0x10, 18, 1),
-+ PIN_FIELD_BASE(161, 166, 2, 0x080, 0x10, 0, 1),
-+ PIN_FIELD_BASE(167, 176, 4, 0x080, 0x10, 11, 1),
-+ PIN_FIELD_BASE(177, 177, 6, 0x080, 0x10, 10, 1),
-+ PIN_FIELD_BASE(178, 178, 6, 0x080, 0x10, 16, 1),
-+ PIN_FIELD_BASE(179, 179, 6, 0x080, 0x10, 25, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt8183_pin_drv_range[] = {
-+ PINS_FIELD_BASE(0, 3, 6, 0x0A0, 0x10, 12, 3),
-+ PINS_FIELD_BASE(4, 7, 6, 0x0A0, 0x10, 20, 3),
-+ PIN_FIELD_BASE(8, 8, 6, 0x0A0, 0x10, 0, 3),
-+ PINS_FIELD_BASE(9, 10, 6, 0x0B0, 0x10, 16, 3),
-+ PIN_FIELD_BASE(11, 11, 1, 0x0A0, 0x10, 12, 3),
-+ PIN_FIELD_BASE(12, 12, 1, 0x0A0, 0x10, 28, 3),
-+ PINS_FIELD_BASE(13, 16, 2, 0x0A0, 0x10, 8, 3),
-+ PINS_FIELD_BASE(17, 20, 2, 0x0A0, 0x10, 12, 3),
-+ PINS_FIELD_BASE(21, 24, 2, 0x0A0, 0x10, 16, 3),
-+ PINS_FIELD_BASE(25, 28, 2, 0x0A0, 0x10, 20, 3),
-+ PIN_FIELD_BASE(29, 29, 2, 0x0A0, 0x10, 24, 3),
-+ PIN_FIELD_BASE(30, 30, 2, 0x0A0, 0x10, 28, 3),
-+ PINS_FIELD_BASE(31, 31, 2, 0x0B0, 0x10, 0, 3),
-+ PINS_FIELD_BASE(32, 34, 2, 0x0A0, 0x10, 28, 3),
-+ PINS_FIELD_BASE(35, 37, 3, 0x0A0, 0x10, 0, 3),
-+ PINS_FIELD_BASE(38, 40, 3, 0x0A0, 0x10, 4, 3),
-+ PINS_FIELD_BASE(41, 42, 3, 0x0A0, 0x10, 8, 3),
-+ PINS_FIELD_BASE(43, 45, 3, 0x0A0, 0x10, 12, 3),
-+ PINS_FIELD_BASE(46, 47, 3, 0x0A0, 0x10, 16, 3),
-+ PINS_FIELD_BASE(48, 49, 3, 0x0A0, 0x10, 20, 3),
-+ PINS_FIELD_BASE(50, 51, 4, 0x0A0, 0x10, 0, 3),
-+ PINS_FIELD_BASE(52, 57, 4, 0x0A0, 0x10, 4, 3),
-+ PINS_FIELD_BASE(58, 60, 4, 0x0A0, 0x10, 8, 3),
-+ PINS_FIELD_BASE(61, 64, 5, 0x0A0, 0x10, 0, 3),
-+ PINS_FIELD_BASE(65, 66, 5, 0x0A0, 0x10, 4, 3),
-+ PINS_FIELD_BASE(67, 68, 5, 0x0A0, 0x10, 8, 3),
-+ PINS_FIELD_BASE(69, 71, 5, 0x0A0, 0x10, 12, 3),
-+ PINS_FIELD_BASE(72, 76, 5, 0x0A0, 0x10, 16, 3),
-+ PINS_FIELD_BASE(77, 80, 5, 0x0A0, 0x10, 20, 3),
-+ PIN_FIELD_BASE(81, 81, 5, 0x0A0, 0x10, 24, 3),
-+ PINS_FIELD_BASE(82, 83, 5, 0x0A0, 0x10, 28, 3),
-+ PIN_FIELD_BASE(84, 84, 5, 0x0A0, 0x10, 24, 3),
-+ PINS_FIELD_BASE(85, 88, 5, 0x0B0, 0x10, 0, 3),
-+ PIN_FIELD_BASE(89, 89, 6, 0x0B0, 0x10, 12, 3),
-+ PIN_FIELD_BASE(90, 90, 6, 0x0A0, 0x10, 4, 3),
-+ PINS_FIELD_BASE(91, 94, 6, 0x0A0, 0x10, 8, 3),
-+ PINS_FIELD_BASE(95, 96, 6, 0x0A0, 0x10, 24, 3),
-+ PINS_FIELD_BASE(97, 98, 6, 0x0A0, 0x10, 28, 3),
-+ PIN_FIELD_BASE(99, 99, 6, 0x0B0, 0x10, 0, 3),
-+ PIN_FIELD_BASE(100, 100, 6, 0x0B0, 0x10, 4, 3),
-+ PINS_FIELD_BASE(101, 102, 6, 0x0B0, 0x10, 8, 3),
-+ PINS_FIELD_BASE(103, 104, 6, 0x0B0, 0x10, 20, 3),
-+ PINS_FIELD_BASE(105, 106, 6, 0x0B0, 0x10, 24, 3),
-+ PIN_FIELD_BASE(107, 107, 7, 0x0A0, 0x10, 0, 3),
-+ PIN_FIELD_BASE(108, 108, 7, 0x0A0, 0x10, 4, 3),
-+ PIN_FIELD_BASE(109, 109, 7, 0x0A0, 0x10, 8, 3),
-+ PIN_FIELD_BASE(110, 110, 7, 0x0A0, 0x10, 0, 3),
-+ PIN_FIELD_BASE(111, 111, 7, 0x0A0, 0x10, 4, 3),
-+ PIN_FIELD_BASE(112, 112, 7, 0x0A0, 0x10, 8, 3),
-+ PIN_FIELD_BASE(113, 113, 7, 0x0A0, 0x10, 16, 3),
-+ PIN_FIELD_BASE(114, 114, 7, 0x0A0, 0x10, 20, 3),
-+ PIN_FIELD_BASE(115, 115, 7, 0x0A0, 0x10, 24, 3),
-+ PIN_FIELD_BASE(116, 116, 7, 0x0A0, 0x10, 28, 3),
-+ PIN_FIELD_BASE(117, 117, 7, 0x0B0, 0x10, 0, 3),
-+ PIN_FIELD_BASE(118, 118, 7, 0x0B0, 0x10, 4, 3),
-+ PIN_FIELD_BASE(119, 119, 7, 0x0B0, 0x10, 8, 3),
-+ PIN_FIELD_BASE(120, 120, 7, 0x0B0, 0x10, 12, 3),
-+ PIN_FIELD_BASE(121, 121, 7, 0x0B0, 0x10, 16, 3),
-+ PIN_FIELD_BASE(122, 122, 8, 0x0A0, 0x10, 0, 3),
-+ PIN_FIELD_BASE(123, 123, 8, 0x0A0, 0x10, 4, 3),
-+ PIN_FIELD_BASE(124, 124, 8, 0x0A0, 0x10, 8, 3),
-+ PINS_FIELD_BASE(125, 130, 8, 0x0A0, 0x10, 4, 3),
-+ PIN_FIELD_BASE(131, 131, 8, 0x0A0, 0x10, 12, 3),
-+ PIN_FIELD_BASE(132, 132, 8, 0x0A0, 0x10, 4, 3),
-+ PIN_FIELD_BASE(133, 133, 8, 0x0A0, 0x10, 16, 3),
-+ PIN_FIELD_BASE(134, 134, 1, 0x0A0, 0x10, 0, 3),
-+ PIN_FIELD_BASE(135, 135, 1, 0x0A0, 0x10, 4, 3),
-+ PINS_FIELD_BASE(136, 143, 1, 0x0A0, 0x10, 8, 3),
-+ PINS_FIELD_BASE(144, 147, 1, 0x0A0, 0x10, 16, 3),
-+ PIN_FIELD_BASE(148, 148, 1, 0x0A0, 0x10, 20, 3),
-+ PIN_FIELD_BASE(149, 149, 1, 0x0A0, 0x10, 24, 3),
-+ PINS_FIELD_BASE(150, 153, 1, 0x0B0, 0x10, 0, 3),
-+ PIN_FIELD_BASE(154, 154, 1, 0x0B0, 0x10, 4, 3),
-+ PINS_FIELD_BASE(155, 157, 1, 0x0B0, 0x10, 8, 3),
-+ PINS_FIELD_BASE(158, 160, 1, 0x0B0, 0x10, 0, 3),
-+ PINS_FIELD_BASE(161, 164, 2, 0x0A0, 0x10, 0, 3),
-+ PINS_FIELD_BASE(165, 166, 2, 0x0A0, 0x10, 4, 3),
-+ PINS_FIELD_BASE(167, 168, 4, 0x0A0, 0x10, 8, 3),
-+ PIN_FIELD_BASE(169, 169, 4, 0x0A0, 0x10, 12, 3),
-+ PINS_FIELD_BASE(170, 174, 4, 0x0A0, 0x10, 16, 3),
-+ PINS_FIELD_BASE(175, 176, 4, 0x0A0, 0x10, 12, 3),
-+ PINS_FIELD_BASE(177, 179, 6, 0x0A0, 0x10, 16, 3),
-+};
-+
-+static const struct mtk_pin_field_calc mt8183_pin_pupd_range[] = {
-+ PIN_FIELD_BASE(29, 29, 2, 0x0C0, 0x10, 2, 1),
-+ PIN_FIELD_BASE(30, 30, 2, 0x0C0, 0x10, 6, 1),
-+ PIN_FIELD_BASE(31, 31, 2, 0x0C0, 0x10, 10, 1),
-+ PIN_FIELD_BASE(32, 32, 2, 0x0C0, 0x10, 14, 1),
-+ PIN_FIELD_BASE(33, 33, 2, 0x0C0, 0x10, 18, 1),
-+ PIN_FIELD_BASE(34, 34, 2, 0x0C0, 0x10, 22, 1),
-+ PIN_FIELD_BASE(35, 35, 3, 0x0C0, 0x10, 2, 1),
-+ PIN_FIELD_BASE(36, 36, 3, 0x0C0, 0x10, 6, 1),
-+ PIN_FIELD_BASE(37, 37, 3, 0x0C0, 0x10, 10, 1),
-+ PIN_FIELD_BASE(38, 38, 3, 0x0C0, 0x10, 14, 1),
-+ PIN_FIELD_BASE(39, 39, 3, 0x0C0, 0x10, 18, 1),
-+ PIN_FIELD_BASE(40, 40, 3, 0x0C0, 0x10, 22, 1),
-+ PIN_FIELD_BASE(41, 41, 3, 0x0C0, 0x10, 26, 1),
-+ PIN_FIELD_BASE(42, 42, 3, 0x0C0, 0x10, 30, 1),
-+ PIN_FIELD_BASE(91, 91, 6, 0x0C0, 0x10, 2, 1),
-+ PIN_FIELD_BASE(92, 92, 6, 0x0C0, 0x10, 6, 1),
-+ PIN_FIELD_BASE(93, 93, 6, 0x0C0, 0x10, 10, 1),
-+ PIN_FIELD_BASE(94, 94, 6, 0x0C0, 0x10, 14, 1),
-+ PIN_FIELD_BASE(122, 122, 8, 0x0C0, 0x10, 2, 1),
-+ PIN_FIELD_BASE(123, 123, 8, 0x0C0, 0x10, 6, 1),
-+ PIN_FIELD_BASE(124, 124, 8, 0x0C0, 0x10, 10, 1),
-+ PIN_FIELD_BASE(125, 125, 8, 0x0C0, 0x10, 14, 1),
-+ PIN_FIELD_BASE(126, 126, 8, 0x0C0, 0x10, 18, 1),
-+ PIN_FIELD_BASE(127, 127, 8, 0x0C0, 0x10, 22, 1),
-+ PIN_FIELD_BASE(128, 128, 8, 0x0C0, 0x10, 26, 1),
-+ PIN_FIELD_BASE(129, 129, 8, 0x0C0, 0x10, 30, 1),
-+ PIN_FIELD_BASE(130, 130, 8, 0x0D0, 0x10, 2, 1),
-+ PIN_FIELD_BASE(131, 131, 8, 0x0D0, 0x10, 6, 1),
-+ PIN_FIELD_BASE(132, 132, 8, 0x0D0, 0x10, 10, 1),
-+ PIN_FIELD_BASE(133, 133, 8, 0x0D0, 0x10, 14, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt8183_pin_r0_range[] = {
-+ PIN_FIELD_BASE(29, 29, 2, 0x0C0, 0x10, 0, 1),
-+ PIN_FIELD_BASE(30, 30, 2, 0x0C0, 0x10, 4, 1),
-+ PIN_FIELD_BASE(31, 31, 2, 0x0C0, 0x10, 8, 1),
-+ PIN_FIELD_BASE(32, 32, 2, 0x0C0, 0x10, 12, 1),
-+ PIN_FIELD_BASE(33, 33, 2, 0x0C0, 0x10, 16, 1),
-+ PIN_FIELD_BASE(34, 34, 2, 0x0C0, 0x10, 20, 1),
-+ PIN_FIELD_BASE(35, 35, 3, 0x0C0, 0x10, 0, 1),
-+ PIN_FIELD_BASE(36, 36, 3, 0x0C0, 0x10, 4, 1),
-+ PIN_FIELD_BASE(37, 37, 3, 0x0C0, 0x10, 8, 1),
-+ PIN_FIELD_BASE(38, 38, 3, 0x0C0, 0x10, 12, 1),
-+ PIN_FIELD_BASE(39, 39, 3, 0x0C0, 0x10, 16, 1),
-+ PIN_FIELD_BASE(40, 40, 3, 0x0C0, 0x10, 20, 1),
-+ PIN_FIELD_BASE(41, 41, 3, 0x0C0, 0x10, 24, 1),
-+ PIN_FIELD_BASE(42, 42, 3, 0x0C0, 0x10, 28, 1),
-+ PIN_FIELD_BASE(48, 48, 3, 0x0F0, 0x10, 18, 1),
-+ PIN_FIELD_BASE(49, 49, 3, 0x0F0, 0x10, 13, 1),
-+ PIN_FIELD_BASE(50, 50, 4, 0x0F0, 0x10, 10, 1),
-+ PIN_FIELD_BASE(51, 51, 4, 0x0F0, 0x10, 5, 1),
-+ PIN_FIELD_BASE(81, 81, 5, 0x0F0, 0x10, 7, 1),
-+ PIN_FIELD_BASE(82, 82, 5, 0x0F0, 0x10, 5, 1),
-+ PIN_FIELD_BASE(83, 83, 5, 0x0F0, 0x10, 15, 1),
-+ PIN_FIELD_BASE(84, 84, 5, 0x0F0, 0x10, 17, 1),
-+ PIN_FIELD_BASE(91, 91, 6, 0x0C0, 0x10, 0, 1),
-+ PIN_FIELD_BASE(92, 92, 6, 0x0C0, 0x10, 4, 1),
-+ PIN_FIELD_BASE(93, 93, 6, 0x0C0, 0x10, 8, 1),
-+ PIN_FIELD_BASE(94, 94, 6, 0x0C0, 0x10, 12, 1),
-+ PIN_FIELD_BASE(103, 103, 6, 0x0F0, 0x10, 20, 1),
-+ PIN_FIELD_BASE(104, 104, 6, 0x0F0, 0x10, 10, 1),
-+ PIN_FIELD_BASE(105, 105, 6, 0x0F0, 0x10, 22, 1),
-+ PIN_FIELD_BASE(106, 106, 6, 0x0F0, 0x10, 12, 1),
-+ PIN_FIELD_BASE(122, 122, 8, 0x0C0, 0x10, 0, 1),
-+ PIN_FIELD_BASE(123, 123, 8, 0x0C0, 0x10, 4, 1),
-+ PIN_FIELD_BASE(124, 124, 8, 0x0C0, 0x10, 8, 1),
-+ PIN_FIELD_BASE(125, 125, 8, 0x0C0, 0x10, 12, 1),
-+ PIN_FIELD_BASE(126, 126, 8, 0x0C0, 0x10, 16, 1),
-+ PIN_FIELD_BASE(127, 127, 8, 0x0C0, 0x10, 20, 1),
-+ PIN_FIELD_BASE(128, 128, 8, 0x0C0, 0x10, 24, 1),
-+ PIN_FIELD_BASE(129, 129, 8, 0x0C0, 0x10, 28, 1),
-+ PIN_FIELD_BASE(130, 130, 8, 0x0D0, 0x10, 0, 1),
-+ PIN_FIELD_BASE(131, 131, 8, 0x0D0, 0x10, 4, 1),
-+ PIN_FIELD_BASE(132, 132, 8, 0x0D0, 0x10, 8, 1),
-+ PIN_FIELD_BASE(133, 133, 8, 0x0D0, 0x10, 12, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt8183_pin_r1_range[] = {
-+ PIN_FIELD_BASE(29, 29, 2, 0x0C0, 0x10, 1, 1),
-+ PIN_FIELD_BASE(30, 30, 2, 0x0C0, 0x10, 5, 1),
-+ PIN_FIELD_BASE(31, 31, 2, 0x0C0, 0x10, 9, 1),
-+ PIN_FIELD_BASE(32, 32, 2, 0x0C0, 0x10, 13, 1),
-+ PIN_FIELD_BASE(33, 33, 2, 0x0C0, 0x10, 17, 1),
-+ PIN_FIELD_BASE(34, 34, 2, 0x0C0, 0x10, 21, 1),
-+ PIN_FIELD_BASE(35, 35, 3, 0x0C0, 0x10, 1, 1),
-+ PIN_FIELD_BASE(36, 36, 3, 0x0C0, 0x10, 5, 1),
-+ PIN_FIELD_BASE(37, 37, 3, 0x0C0, 0x10, 9, 1),
-+ PIN_FIELD_BASE(38, 38, 3, 0x0C0, 0x10, 13, 1),
-+ PIN_FIELD_BASE(39, 39, 3, 0x0C0, 0x10, 17, 1),
-+ PIN_FIELD_BASE(40, 40, 3, 0x0C0, 0x10, 21, 1),
-+ PIN_FIELD_BASE(41, 41, 3, 0x0C0, 0x10, 25, 1),
-+ PIN_FIELD_BASE(42, 42, 3, 0x0C0, 0x10, 29, 1),
-+ PIN_FIELD_BASE(48, 48, 3, 0x0F0, 0x10, 19, 1),
-+ PIN_FIELD_BASE(49, 49, 3, 0x0F0, 0x10, 14, 1),
-+ PIN_FIELD_BASE(50, 50, 4, 0x0F0, 0x10, 11, 1),
-+ PIN_FIELD_BASE(51, 51, 4, 0x0F0, 0x10, 6, 1),
-+ PIN_FIELD_BASE(81, 81, 5, 0x0F0, 0x10, 8, 1),
-+ PIN_FIELD_BASE(82, 82, 5, 0x0F0, 0x10, 6, 1),
-+ PIN_FIELD_BASE(83, 83, 5, 0x0F0, 0x10, 16, 1),
-+ PIN_FIELD_BASE(84, 84, 5, 0x0F0, 0x10, 18, 1),
-+ PIN_FIELD_BASE(91, 91, 6, 0x0C0, 0x10, 1, 1),
-+ PIN_FIELD_BASE(92, 92, 6, 0x0C0, 0x10, 5, 1),
-+ PIN_FIELD_BASE(93, 93, 6, 0x0C0, 0x10, 9, 1),
-+ PIN_FIELD_BASE(94, 94, 6, 0x0C0, 0x10, 13, 1),
-+ PIN_FIELD_BASE(103, 103, 6, 0x0F0, 0x10, 21, 1),
-+ PIN_FIELD_BASE(104, 104, 6, 0x0F0, 0x10, 11, 1),
-+ PIN_FIELD_BASE(105, 105, 6, 0x0F0, 0x10, 23, 1),
-+ PIN_FIELD_BASE(106, 106, 6, 0x0F0, 0x10, 13, 1),
-+ PIN_FIELD_BASE(122, 122, 8, 0x0C0, 0x10, 1, 1),
-+ PIN_FIELD_BASE(123, 123, 8, 0x0C0, 0x10, 5, 1),
-+ PIN_FIELD_BASE(124, 124, 8, 0x0C0, 0x10, 9, 1),
-+ PIN_FIELD_BASE(125, 125, 8, 0x0C0, 0x10, 13, 1),
-+ PIN_FIELD_BASE(126, 126, 8, 0x0C0, 0x10, 17, 1),
-+ PIN_FIELD_BASE(127, 127, 8, 0x0C0, 0x10, 21, 1),
-+ PIN_FIELD_BASE(128, 128, 8, 0x0C0, 0x10, 25, 1),
-+ PIN_FIELD_BASE(129, 129, 8, 0x0C0, 0x10, 29, 1),
-+ PIN_FIELD_BASE(130, 130, 8, 0x0D0, 0x10, 1, 1),
-+ PIN_FIELD_BASE(131, 131, 8, 0x0D0, 0x10, 5, 1),
-+ PIN_FIELD_BASE(132, 132, 8, 0x0D0, 0x10, 9, 1),
-+ PIN_FIELD_BASE(133, 133, 8, 0x0D0, 0x10, 13, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt8183_pin_e1e0en_range[] = {
-+ PIN_FIELD_BASE(48, 48, 3, 0x0F0, 0x10, 20, 1),
-+ PIN_FIELD_BASE(49, 49, 3, 0x0F0, 0x10, 15, 1),
-+ PIN_FIELD_BASE(50, 50, 4, 0x0F0, 0x10, 12, 1),
-+ PIN_FIELD_BASE(51, 51, 4, 0x0F0, 0x10, 7, 1),
-+ PIN_FIELD_BASE(81, 81, 5, 0x0F0, 0x10, 12, 1),
-+ PIN_FIELD_BASE(82, 82, 5, 0x0F0, 0x10, 9, 1),
-+ PIN_FIELD_BASE(83, 83, 5, 0x0F0, 0x10, 19, 1),
-+ PIN_FIELD_BASE(84, 84, 5, 0x0F0, 0x10, 22, 1),
-+ PIN_FIELD_BASE(103, 103, 6, 0x0F0, 0x10, 24, 1),
-+ PIN_FIELD_BASE(104, 104, 6, 0x0F0, 0x10, 14, 1),
-+ PIN_FIELD_BASE(105, 105, 6, 0x0F0, 0x10, 27, 1),
-+ PIN_FIELD_BASE(106, 106, 6, 0x0F0, 0x10, 17, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt8183_pin_e0_range[] = {
-+ PIN_FIELD_BASE(48, 48, 3, 0x0F0, 0x10, 21, 1),
-+ PIN_FIELD_BASE(49, 49, 3, 0x0F0, 0x10, 16, 1),
-+ PIN_FIELD_BASE(50, 50, 4, 0x0F0, 0x10, 13, 1),
-+ PIN_FIELD_BASE(51, 51, 4, 0x0F0, 0x10, 8, 1),
-+ PIN_FIELD_BASE(81, 81, 5, 0x0F0, 0x10, 13, 1),
-+ PIN_FIELD_BASE(82, 82, 5, 0x0F0, 0x10, 10, 1),
-+ PIN_FIELD_BASE(83, 83, 5, 0x0F0, 0x10, 20, 1),
-+ PIN_FIELD_BASE(84, 84, 5, 0x0F0, 0x10, 23, 1),
-+ PIN_FIELD_BASE(103, 103, 6, 0x0F0, 0x10, 25, 1),
-+ PIN_FIELD_BASE(104, 104, 6, 0x0F0, 0x10, 15, 1),
-+ PIN_FIELD_BASE(105, 105, 6, 0x0F0, 0x10, 28, 1),
-+ PIN_FIELD_BASE(106, 106, 6, 0x0F0, 0x10, 18, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt8183_pin_e1_range[] = {
-+ PIN_FIELD_BASE(48, 48, 3, 0x0F0, 0x10, 22, 1),
-+ PIN_FIELD_BASE(49, 49, 3, 0x0F0, 0x10, 17, 1),
-+ PIN_FIELD_BASE(50, 50, 4, 0x0F0, 0x10, 14, 1),
-+ PIN_FIELD_BASE(51, 51, 4, 0x0F0, 0x10, 9, 1),
-+ PIN_FIELD_BASE(81, 81, 5, 0x0F0, 0x10, 14, 1),
-+ PIN_FIELD_BASE(82, 82, 5, 0x0F0, 0x10, 11, 1),
-+ PIN_FIELD_BASE(83, 83, 5, 0x0F0, 0x10, 21, 1),
-+ PIN_FIELD_BASE(84, 84, 5, 0x0F0, 0x10, 24, 1),
-+ PIN_FIELD_BASE(103, 103, 6, 0x0F0, 0x10, 26, 1),
-+ PIN_FIELD_BASE(104, 104, 6, 0x0F0, 0x10, 16, 1),
-+ PIN_FIELD_BASE(105, 105, 6, 0x0F0, 0x10, 29, 1),
-+ PIN_FIELD_BASE(106, 106, 6, 0x0F0, 0x10, 19, 1),
-+};
-+
-+static const struct mtk_pin_reg_calc mt8183_reg_cals[PINCTRL_PIN_REG_MAX] = {
-+ [PINCTRL_PIN_REG_MODE] = MTK_RANGE(mt8183_pin_mode_range),
-+ [PINCTRL_PIN_REG_DIR] = MTK_RANGE(mt8183_pin_dir_range),
-+ [PINCTRL_PIN_REG_DI] = MTK_RANGE(mt8183_pin_di_range),
-+ [PINCTRL_PIN_REG_DO] = MTK_RANGE(mt8183_pin_do_range),
-+ [PINCTRL_PIN_REG_SMT] = MTK_RANGE(mt8183_pin_smt_range),
-+ [PINCTRL_PIN_REG_IES] = MTK_RANGE(mt8183_pin_ies_range),
-+ [PINCTRL_PIN_REG_PULLEN] = MTK_RANGE(mt8183_pin_pullen_range),
-+ [PINCTRL_PIN_REG_PULLSEL] = MTK_RANGE(mt8183_pin_pullsel_range),
-+ [PINCTRL_PIN_REG_DRV] = MTK_RANGE(mt8183_pin_drv_range),
-+ [PINCTRL_PIN_REG_PUPD] = MTK_RANGE(mt8183_pin_pupd_range),
-+ [PINCTRL_PIN_REG_R0] = MTK_RANGE(mt8183_pin_r0_range),
-+ [PINCTRL_PIN_REG_R1] = MTK_RANGE(mt8183_pin_r1_range),
-+ [PINCTRL_PIN_REG_DRV_EN] = MTK_RANGE(mt8183_pin_e1e0en_range),
-+ [PINCTRL_PIN_REG_DRV_E0] = MTK_RANGE(mt8183_pin_e0_range),
-+ [PINCTRL_PIN_REG_DRV_E1] = MTK_RANGE(mt8183_pin_e1_range),
-+};
-+
-+static const char * const mt8183_pinctrl_register_base_names[] = {
-+ "iocfg0", "iocfg1", "iocfg2", "iocfg3", "iocfg4", "iocfg5",
-+ "iocfg6", "iocfg7", "iocfg8",
-+};
-+
-+static const struct mtk_eint_hw mt8183_eint_hw = {
-+ .port_mask = 7,
-+ .ports = 6,
-+ .ap_num = 212,
-+ .db_cnt = 13,
-+};
-+
-+static const struct mtk_pin_soc mt8183_data = {
-+ .reg_cal = mt8183_reg_cals,
-+ .pins = mtk_pins_mt8183,
-+ .npins = ARRAY_SIZE(mtk_pins_mt8183),
-+ .ngrps = ARRAY_SIZE(mtk_pins_mt8183),
-+ .eint_hw = &mt8183_eint_hw,
-+ .gpio_m = 0,
-+ .ies_present = true,
-+ .base_names = mt8183_pinctrl_register_base_names,
-+ .nbase_names = ARRAY_SIZE(mt8183_pinctrl_register_base_names),
-+ .bias_disable_set = mtk_pinconf_bias_disable_set_rev1,
-+ .bias_disable_get = mtk_pinconf_bias_disable_get_rev1,
-+ .bias_set = mtk_pinconf_bias_set_rev1,
-+ .bias_get = mtk_pinconf_bias_get_rev1,
-+ .drive_set = mtk_pinconf_drive_set_rev1,
-+ .drive_get = mtk_pinconf_drive_get_rev1,
-+ .adv_pull_get = mtk_pinconf_adv_pull_get,
-+ .adv_pull_set = mtk_pinconf_adv_pull_set,
-+ .adv_drive_get = mtk_pinconf_adv_drive_get,
-+ .adv_drive_set = mtk_pinconf_adv_drive_set,
-+};
-+
-+static const struct of_device_id mt8183_pinctrl_of_match[] = {
-+ { .compatible = "mediatek,mt8183-pinctrl", },
-+ { }
-+};
-+
-+static int mt8183_pinctrl_probe(struct platform_device *pdev)
-+{
-+ return mtk_paris_pinctrl_probe(pdev, &mt8183_data);
-+}
-+
-+static struct platform_driver mt8183_pinctrl_driver = {
-+ .driver = {
-+ .name = "mt8183-pinctrl",
-+ .of_match_table = mt8183_pinctrl_of_match,
-+ .pm = &mtk_paris_pinctrl_pm_ops,
-+ },
-+ .probe = mt8183_pinctrl_probe,
-+};
-+
-+static int __init mt8183_pinctrl_init(void)
-+{
-+ return platform_driver_register(&mt8183_pinctrl_driver);
-+}
-+arch_initcall(mt8183_pinctrl_init);
---- /dev/null
-+++ b/drivers/pinctrl/mediatek/pinctrl-mt8516.c
-@@ -0,0 +1,362 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (c) 2019 MediaTek Inc.
-+ * Author: Min.Guo <min.guo@mediatek.com>
-+ */
-+
-+#include <dt-bindings/pinctrl/mt65xx.h>
-+#include <linux/of.h>
-+#include <linux/of_device.h>
-+#include <linux/module.h>
-+#include <linux/pinctrl/pinctrl.h>
-+#include <linux/platform_device.h>
-+#include <linux/regmap.h>
-+
-+#include "pinctrl-mtk-common.h"
-+#include "pinctrl-mtk-mt8516.h"
-+
-+static const struct mtk_drv_group_desc mt8516_drv_grp[] = {
-+ /* 0E4E8SR 4/8/12/16 */
-+ MTK_DRV_GRP(4, 16, 1, 2, 4),
-+ /* 0E2E4SR 2/4/6/8 */
-+ MTK_DRV_GRP(2, 8, 1, 2, 2),
-+ /* E8E4E2 2/4/6/8/10/12/14/16 */
-+ MTK_DRV_GRP(2, 16, 0, 2, 2)
-+};
-+
-+static const struct mtk_pin_drv_grp mt8516_pin_drv[] = {
-+ MTK_PIN_DRV_GRP(0, 0xd00, 0, 0),
-+ MTK_PIN_DRV_GRP(1, 0xd00, 0, 0),
-+ MTK_PIN_DRV_GRP(2, 0xd00, 0, 0),
-+ MTK_PIN_DRV_GRP(3, 0xd00, 0, 0),
-+ MTK_PIN_DRV_GRP(4, 0xd00, 0, 0),
-+
-+ MTK_PIN_DRV_GRP(5, 0xd00, 4, 0),
-+ MTK_PIN_DRV_GRP(6, 0xd00, 4, 0),
-+ MTK_PIN_DRV_GRP(7, 0xd00, 4, 0),
-+ MTK_PIN_DRV_GRP(8, 0xd00, 4, 0),
-+ MTK_PIN_DRV_GRP(9, 0xd00, 4, 0),
-+ MTK_PIN_DRV_GRP(10, 0xd00, 4, 0),
-+
-+ MTK_PIN_DRV_GRP(11, 0xd00, 8, 0),
-+ MTK_PIN_DRV_GRP(12, 0xd00, 8, 0),
-+ MTK_PIN_DRV_GRP(13, 0xd00, 8, 0),
-+
-+ MTK_PIN_DRV_GRP(14, 0xd00, 12, 2),
-+ MTK_PIN_DRV_GRP(15, 0xd00, 12, 2),
-+ MTK_PIN_DRV_GRP(16, 0xd00, 12, 2),
-+ MTK_PIN_DRV_GRP(17, 0xd00, 12, 2),
-+
-+ MTK_PIN_DRV_GRP(18, 0xd10, 0, 0),
-+ MTK_PIN_DRV_GRP(19, 0xd10, 0, 0),
-+ MTK_PIN_DRV_GRP(20, 0xd10, 0, 0),
-+
-+ MTK_PIN_DRV_GRP(21, 0xd00, 12, 2),
-+ MTK_PIN_DRV_GRP(22, 0xd00, 12, 2),
-+ MTK_PIN_DRV_GRP(23, 0xd00, 12, 2),
-+
-+ MTK_PIN_DRV_GRP(24, 0xd00, 8, 0),
-+ MTK_PIN_DRV_GRP(25, 0xd00, 8, 0),
-+
-+ MTK_PIN_DRV_GRP(26, 0xd10, 4, 1),
-+ MTK_PIN_DRV_GRP(27, 0xd10, 4, 1),
-+ MTK_PIN_DRV_GRP(28, 0xd10, 4, 1),
-+ MTK_PIN_DRV_GRP(29, 0xd10, 4, 1),
-+ MTK_PIN_DRV_GRP(30, 0xd10, 4, 1),
-+
-+ MTK_PIN_DRV_GRP(31, 0xd10, 8, 1),
-+ MTK_PIN_DRV_GRP(32, 0xd10, 8, 1),
-+ MTK_PIN_DRV_GRP(33, 0xd10, 8, 1),
-+
-+ MTK_PIN_DRV_GRP(34, 0xd10, 12, 0),
-+ MTK_PIN_DRV_GRP(35, 0xd10, 12, 0),
-+
-+ MTK_PIN_DRV_GRP(36, 0xd20, 0, 0),
-+ MTK_PIN_DRV_GRP(37, 0xd20, 0, 0),
-+ MTK_PIN_DRV_GRP(38, 0xd20, 0, 0),
-+ MTK_PIN_DRV_GRP(39, 0xd20, 0, 0),
-+
-+ MTK_PIN_DRV_GRP(40, 0xd20, 4, 1),
-+
-+ MTK_PIN_DRV_GRP(41, 0xd20, 8, 1),
-+ MTK_PIN_DRV_GRP(42, 0xd20, 8, 1),
-+ MTK_PIN_DRV_GRP(43, 0xd20, 8, 1),
-+
-+ MTK_PIN_DRV_GRP(44, 0xd20, 12, 1),
-+ MTK_PIN_DRV_GRP(45, 0xd20, 12, 1),
-+ MTK_PIN_DRV_GRP(46, 0xd20, 12, 1),
-+ MTK_PIN_DRV_GRP(47, 0xd20, 12, 1),
-+
-+ MTK_PIN_DRV_GRP(48, 0xd30, 0, 1),
-+ MTK_PIN_DRV_GRP(49, 0xd30, 0, 1),
-+ MTK_PIN_DRV_GRP(50, 0xd30, 0, 1),
-+ MTK_PIN_DRV_GRP(51, 0xd30, 0, 1),
-+
-+ MTK_PIN_DRV_GRP(54, 0xd30, 8, 1),
-+
-+ MTK_PIN_DRV_GRP(55, 0xd30, 12, 1),
-+ MTK_PIN_DRV_GRP(56, 0xd30, 12, 1),
-+ MTK_PIN_DRV_GRP(57, 0xd30, 12, 1),
-+
-+ MTK_PIN_DRV_GRP(62, 0xd40, 8, 1),
-+ MTK_PIN_DRV_GRP(63, 0xd40, 8, 1),
-+ MTK_PIN_DRV_GRP(64, 0xd40, 8, 1),
-+ MTK_PIN_DRV_GRP(65, 0xd40, 8, 1),
-+ MTK_PIN_DRV_GRP(66, 0xd40, 8, 1),
-+ MTK_PIN_DRV_GRP(67, 0xd40, 8, 1),
-+
-+ MTK_PIN_DRV_GRP(68, 0xd40, 12, 2),
-+
-+ MTK_PIN_DRV_GRP(69, 0xd50, 0, 2),
-+
-+ MTK_PIN_DRV_GRP(70, 0xd50, 4, 2),
-+ MTK_PIN_DRV_GRP(71, 0xd50, 4, 2),
-+ MTK_PIN_DRV_GRP(72, 0xd50, 4, 2),
-+ MTK_PIN_DRV_GRP(73, 0xd50, 4, 2),
-+
-+ MTK_PIN_DRV_GRP(100, 0xd50, 8, 1),
-+ MTK_PIN_DRV_GRP(101, 0xd50, 8, 1),
-+ MTK_PIN_DRV_GRP(102, 0xd50, 8, 1),
-+ MTK_PIN_DRV_GRP(103, 0xd50, 8, 1),
-+
-+ MTK_PIN_DRV_GRP(104, 0xd50, 12, 2),
-+
-+ MTK_PIN_DRV_GRP(105, 0xd60, 0, 2),
-+
-+ MTK_PIN_DRV_GRP(106, 0xd60, 4, 2),
-+ MTK_PIN_DRV_GRP(107, 0xd60, 4, 2),
-+ MTK_PIN_DRV_GRP(108, 0xd60, 4, 2),
-+ MTK_PIN_DRV_GRP(109, 0xd60, 4, 2),
-+
-+ MTK_PIN_DRV_GRP(110, 0xd70, 0, 2),
-+ MTK_PIN_DRV_GRP(111, 0xd70, 0, 2),
-+ MTK_PIN_DRV_GRP(112, 0xd70, 0, 2),
-+ MTK_PIN_DRV_GRP(113, 0xd70, 0, 2),
-+
-+ MTK_PIN_DRV_GRP(114, 0xd70, 4, 2),
-+
-+ MTK_PIN_DRV_GRP(115, 0xd60, 12, 2),
-+
-+ MTK_PIN_DRV_GRP(116, 0xd60, 8, 2),
-+
-+ MTK_PIN_DRV_GRP(117, 0xd70, 0, 2),
-+ MTK_PIN_DRV_GRP(118, 0xd70, 0, 2),
-+ MTK_PIN_DRV_GRP(119, 0xd70, 0, 2),
-+ MTK_PIN_DRV_GRP(120, 0xd70, 0, 2),
-+};
-+
-+static const struct mtk_pin_spec_pupd_set_samereg mt8516_spec_pupd[] = {
-+ MTK_PIN_PUPD_SPEC_SR(14, 0xe50, 14, 13, 12),
-+ MTK_PIN_PUPD_SPEC_SR(15, 0xe60, 2, 1, 0),
-+ MTK_PIN_PUPD_SPEC_SR(16, 0xe60, 6, 5, 4),
-+ MTK_PIN_PUPD_SPEC_SR(17, 0xe60, 10, 9, 8),
-+
-+ MTK_PIN_PUPD_SPEC_SR(21, 0xe60, 14, 13, 12),
-+ MTK_PIN_PUPD_SPEC_SR(22, 0xe70, 2, 1, 0),
-+ MTK_PIN_PUPD_SPEC_SR(23, 0xe70, 6, 5, 4),
-+
-+ MTK_PIN_PUPD_SPEC_SR(40, 0xe80, 2, 1, 0),
-+ MTK_PIN_PUPD_SPEC_SR(41, 0xe80, 6, 5, 4),
-+ MTK_PIN_PUPD_SPEC_SR(42, 0xe90, 2, 1, 0),
-+ MTK_PIN_PUPD_SPEC_SR(43, 0xe90, 6, 5, 4),
-+
-+ MTK_PIN_PUPD_SPEC_SR(68, 0xe50, 10, 9, 8),
-+ MTK_PIN_PUPD_SPEC_SR(69, 0xe50, 6, 5, 4),
-+ MTK_PIN_PUPD_SPEC_SR(70, 0xe40, 6, 5, 4),
-+ MTK_PIN_PUPD_SPEC_SR(71, 0xe40, 10, 9, 8),
-+ MTK_PIN_PUPD_SPEC_SR(72, 0xe40, 14, 13, 12),
-+ MTK_PIN_PUPD_SPEC_SR(73, 0xe50, 2, 1, 0),
-+
-+ MTK_PIN_PUPD_SPEC_SR(104, 0xe40, 2, 1, 0),
-+ MTK_PIN_PUPD_SPEC_SR(105, 0xe30, 14, 13, 12),
-+ MTK_PIN_PUPD_SPEC_SR(106, 0xe20, 14, 13, 12),
-+ MTK_PIN_PUPD_SPEC_SR(107, 0xe30, 2, 1, 0),
-+ MTK_PIN_PUPD_SPEC_SR(108, 0xe30, 6, 5, 4),
-+ MTK_PIN_PUPD_SPEC_SR(109, 0xe30, 10, 9, 8),
-+ MTK_PIN_PUPD_SPEC_SR(110, 0xe10, 14, 13, 12),
-+ MTK_PIN_PUPD_SPEC_SR(111, 0xe10, 10, 9, 8),
-+ MTK_PIN_PUPD_SPEC_SR(112, 0xe10, 6, 5, 4),
-+ MTK_PIN_PUPD_SPEC_SR(113, 0xe10, 2, 1, 0),
-+ MTK_PIN_PUPD_SPEC_SR(114, 0xe20, 10, 9, 8),
-+ MTK_PIN_PUPD_SPEC_SR(115, 0xe20, 2, 1, 0),
-+ MTK_PIN_PUPD_SPEC_SR(116, 0xe20, 6, 5, 4),
-+ MTK_PIN_PUPD_SPEC_SR(117, 0xe00, 14, 13, 12),
-+ MTK_PIN_PUPD_SPEC_SR(118, 0xe00, 10, 9, 8),
-+ MTK_PIN_PUPD_SPEC_SR(119, 0xe00, 6, 5, 4),
-+ MTK_PIN_PUPD_SPEC_SR(120, 0xe00, 2, 1, 0),
-+};
-+
-+static int mt8516_spec_pull_set(struct regmap *regmap, unsigned int pin,
-+ unsigned char align, bool isup, unsigned int r1r0)
-+{
-+ return mtk_pctrl_spec_pull_set_samereg(regmap, mt8516_spec_pupd,
-+ ARRAY_SIZE(mt8516_spec_pupd), pin, align, isup, r1r0);
-+}
-+
-+static const struct mtk_pin_ies_smt_set mt8516_ies_set[] = {
-+ MTK_PIN_IES_SMT_SPEC(0, 6, 0x900, 2),
-+ MTK_PIN_IES_SMT_SPEC(7, 10, 0x900, 3),
-+ MTK_PIN_IES_SMT_SPEC(11, 13, 0x900, 12),
-+ MTK_PIN_IES_SMT_SPEC(14, 17, 0x900, 13),
-+ MTK_PIN_IES_SMT_SPEC(18, 20, 0x910, 10),
-+ MTK_PIN_IES_SMT_SPEC(21, 23, 0x900, 13),
-+ MTK_PIN_IES_SMT_SPEC(24, 25, 0x900, 12),
-+ MTK_PIN_IES_SMT_SPEC(26, 30, 0x900, 0),
-+ MTK_PIN_IES_SMT_SPEC(31, 33, 0x900, 1),
-+ MTK_PIN_IES_SMT_SPEC(34, 39, 0x900, 2),
-+ MTK_PIN_IES_SMT_SPEC(40, 40, 0x910, 11),
-+ MTK_PIN_IES_SMT_SPEC(41, 43, 0x900, 10),
-+ MTK_PIN_IES_SMT_SPEC(44, 47, 0x900, 11),
-+ MTK_PIN_IES_SMT_SPEC(48, 51, 0x900, 14),
-+ MTK_PIN_IES_SMT_SPEC(52, 53, 0x910, 0),
-+ MTK_PIN_IES_SMT_SPEC(54, 54, 0x910, 2),
-+ MTK_PIN_IES_SMT_SPEC(55, 57, 0x910, 4),
-+ MTK_PIN_IES_SMT_SPEC(58, 59, 0x900, 15),
-+ MTK_PIN_IES_SMT_SPEC(60, 61, 0x910, 1),
-+ MTK_PIN_IES_SMT_SPEC(62, 65, 0x910, 5),
-+ MTK_PIN_IES_SMT_SPEC(66, 67, 0x910, 6),
-+ MTK_PIN_IES_SMT_SPEC(68, 68, 0x930, 2),
-+ MTK_PIN_IES_SMT_SPEC(69, 69, 0x930, 1),
-+ MTK_PIN_IES_SMT_SPEC(70, 70, 0x930, 6),
-+ MTK_PIN_IES_SMT_SPEC(71, 71, 0x930, 5),
-+ MTK_PIN_IES_SMT_SPEC(72, 72, 0x930, 4),
-+ MTK_PIN_IES_SMT_SPEC(73, 73, 0x930, 3),
-+ MTK_PIN_IES_SMT_SPEC(100, 103, 0x910, 7),
-+ MTK_PIN_IES_SMT_SPEC(104, 104, 0x920, 12),
-+ MTK_PIN_IES_SMT_SPEC(105, 105, 0x920, 11),
-+ MTK_PIN_IES_SMT_SPEC(106, 106, 0x930, 0),
-+ MTK_PIN_IES_SMT_SPEC(107, 107, 0x920, 15),
-+ MTK_PIN_IES_SMT_SPEC(108, 108, 0x920, 14),
-+ MTK_PIN_IES_SMT_SPEC(109, 109, 0x920, 13),
-+ MTK_PIN_IES_SMT_SPEC(110, 110, 0x920, 9),
-+ MTK_PIN_IES_SMT_SPEC(111, 111, 0x920, 8),
-+ MTK_PIN_IES_SMT_SPEC(112, 112, 0x920, 7),
-+ MTK_PIN_IES_SMT_SPEC(113, 113, 0x920, 6),
-+ MTK_PIN_IES_SMT_SPEC(114, 114, 0x920, 10),
-+ MTK_PIN_IES_SMT_SPEC(115, 115, 0x920, 1),
-+ MTK_PIN_IES_SMT_SPEC(116, 116, 0x920, 0),
-+ MTK_PIN_IES_SMT_SPEC(117, 117, 0x920, 5),
-+ MTK_PIN_IES_SMT_SPEC(118, 118, 0x920, 4),
-+ MTK_PIN_IES_SMT_SPEC(119, 119, 0x920, 3),
-+ MTK_PIN_IES_SMT_SPEC(120, 120, 0x920, 2),
-+ MTK_PIN_IES_SMT_SPEC(121, 124, 0x910, 9),
-+};
-+
-+static const struct mtk_pin_ies_smt_set mt8516_smt_set[] = {
-+ MTK_PIN_IES_SMT_SPEC(0, 6, 0xA00, 2),
-+ MTK_PIN_IES_SMT_SPEC(7, 10, 0xA00, 3),
-+ MTK_PIN_IES_SMT_SPEC(11, 13, 0xA00, 12),
-+ MTK_PIN_IES_SMT_SPEC(14, 17, 0xA00, 13),
-+ MTK_PIN_IES_SMT_SPEC(18, 20, 0xA10, 10),
-+ MTK_PIN_IES_SMT_SPEC(21, 23, 0xA00, 13),
-+ MTK_PIN_IES_SMT_SPEC(24, 25, 0xA00, 12),
-+ MTK_PIN_IES_SMT_SPEC(26, 30, 0xA00, 0),
-+ MTK_PIN_IES_SMT_SPEC(31, 33, 0xA00, 1),
-+ MTK_PIN_IES_SMT_SPEC(34, 39, 0xA900, 2),
-+ MTK_PIN_IES_SMT_SPEC(40, 40, 0xA10, 11),
-+ MTK_PIN_IES_SMT_SPEC(41, 43, 0xA00, 10),
-+ MTK_PIN_IES_SMT_SPEC(44, 47, 0xA00, 11),
-+ MTK_PIN_IES_SMT_SPEC(48, 51, 0xA00, 14),
-+ MTK_PIN_IES_SMT_SPEC(52, 53, 0xA10, 0),
-+ MTK_PIN_IES_SMT_SPEC(54, 54, 0xA10, 2),
-+ MTK_PIN_IES_SMT_SPEC(55, 57, 0xA10, 4),
-+ MTK_PIN_IES_SMT_SPEC(58, 59, 0xA00, 15),
-+ MTK_PIN_IES_SMT_SPEC(60, 61, 0xA10, 1),
-+ MTK_PIN_IES_SMT_SPEC(62, 65, 0xA10, 5),
-+ MTK_PIN_IES_SMT_SPEC(66, 67, 0xA10, 6),
-+ MTK_PIN_IES_SMT_SPEC(68, 68, 0xA30, 2),
-+ MTK_PIN_IES_SMT_SPEC(69, 69, 0xA30, 1),
-+ MTK_PIN_IES_SMT_SPEC(70, 70, 0xA30, 3),
-+ MTK_PIN_IES_SMT_SPEC(71, 71, 0xA30, 4),
-+ MTK_PIN_IES_SMT_SPEC(72, 72, 0xA30, 5),
-+ MTK_PIN_IES_SMT_SPEC(73, 73, 0xA30, 6),
-+
-+ MTK_PIN_IES_SMT_SPEC(100, 103, 0xA10, 7),
-+ MTK_PIN_IES_SMT_SPEC(104, 104, 0xA20, 12),
-+ MTK_PIN_IES_SMT_SPEC(105, 105, 0xA20, 11),
-+ MTK_PIN_IES_SMT_SPEC(106, 106, 0xA30, 13),
-+ MTK_PIN_IES_SMT_SPEC(107, 107, 0xA20, 14),
-+ MTK_PIN_IES_SMT_SPEC(108, 108, 0xA20, 15),
-+ MTK_PIN_IES_SMT_SPEC(109, 109, 0xA30, 0),
-+ MTK_PIN_IES_SMT_SPEC(110, 110, 0xA20, 9),
-+ MTK_PIN_IES_SMT_SPEC(111, 111, 0xA20, 8),
-+ MTK_PIN_IES_SMT_SPEC(112, 112, 0xA20, 7),
-+ MTK_PIN_IES_SMT_SPEC(113, 113, 0xA20, 6),
-+ MTK_PIN_IES_SMT_SPEC(114, 114, 0xA20, 10),
-+ MTK_PIN_IES_SMT_SPEC(115, 115, 0xA20, 1),
-+ MTK_PIN_IES_SMT_SPEC(116, 116, 0xA20, 0),
-+ MTK_PIN_IES_SMT_SPEC(117, 117, 0xA20, 5),
-+ MTK_PIN_IES_SMT_SPEC(118, 118, 0xA20, 4),
-+ MTK_PIN_IES_SMT_SPEC(119, 119, 0xA20, 3),
-+ MTK_PIN_IES_SMT_SPEC(120, 120, 0xA20, 2),
-+ MTK_PIN_IES_SMT_SPEC(121, 124, 0xA10, 9),
-+};
-+
-+static int mt8516_ies_smt_set(struct regmap *regmap, unsigned int pin,
-+ unsigned char align, int value, enum pin_config_param arg)
-+{
-+ if (arg == PIN_CONFIG_INPUT_ENABLE)
-+ return mtk_pconf_spec_set_ies_smt_range(regmap, mt8516_ies_set,
-+ ARRAY_SIZE(mt8516_ies_set), pin, align, value);
-+ else if (arg == PIN_CONFIG_INPUT_SCHMITT_ENABLE)
-+ return mtk_pconf_spec_set_ies_smt_range(regmap, mt8516_smt_set,
-+ ARRAY_SIZE(mt8516_smt_set), pin, align, value);
-+ return -EINVAL;
-+}
-+
-+static const struct mtk_pinctrl_devdata mt8516_pinctrl_data = {
-+ .pins = mtk_pins_mt8516,
-+ .npins = ARRAY_SIZE(mtk_pins_mt8516),
-+ .grp_desc = mt8516_drv_grp,
-+ .n_grp_cls = ARRAY_SIZE(mt8516_drv_grp),
-+ .pin_drv_grp = mt8516_pin_drv,
-+ .n_pin_drv_grps = ARRAY_SIZE(mt8516_pin_drv),
-+ .spec_pull_set = mt8516_spec_pull_set,
-+ .spec_ies_smt_set = mt8516_ies_smt_set,
-+ .dir_offset = 0x0000,
-+ .pullen_offset = 0x0500,
-+ .pullsel_offset = 0x0600,
-+ .dout_offset = 0x0100,
-+ .din_offset = 0x0200,
-+ .pinmux_offset = 0x0300,
-+ .type1_start = 125,
-+ .type1_end = 125,
-+ .port_shf = 4,
-+ .port_mask = 0xf,
-+ .port_align = 4,
-+ .eint_hw = {
-+ .port_mask = 7,
-+ .ports = 6,
-+ .ap_num = 169,
-+ .db_cnt = 64,
-+ },
-+};
-+
-+static int mt8516_pinctrl_probe(struct platform_device *pdev)
-+{
-+ return mtk_pctrl_init(pdev, &mt8516_pinctrl_data, NULL);
-+}
-+
-+static const struct of_device_id mt8516_pctrl_match[] = {
-+ {
-+ .compatible = "mediatek,mt8516-pinctrl",
-+ },
-+ {}
-+};
-+
-+MODULE_DEVICE_TABLE(of, mt8516_pctrl_match);
-+
-+static struct platform_driver mtk_pinctrl_driver = {
-+ .probe = mt8516_pinctrl_probe,
-+ .driver = {
-+ .name = "mediatek-mt8516-pinctrl",
-+ .of_match_table = mt8516_pctrl_match,
-+ .pm = &mtk_eint_pm_ops,
-+ },
-+};
-+
-+static int __init mtk_pinctrl_init(void)
-+{
-+ return platform_driver_register(&mtk_pinctrl_driver);
-+}
-+arch_initcall(mtk_pinctrl_init);
---- /dev/null
-+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c
-@@ -0,0 +1,725 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (C) 2018 MediaTek Inc.
-+ *
-+ * Author: Sean Wang <sean.wang@mediatek.com>
-+ *
-+ */
-+
-+#include <linux/device.h>
-+#include <linux/err.h>
-+#include <linux/gpio/driver.h>
-+#include <linux/platform_device.h>
-+#include <linux/io.h>
-+#include <linux/of_irq.h>
-+
-+#include "mtk-eint.h"
-+#include "pinctrl-mtk-common-v2.h"
-+
-+/**
-+ * struct mtk_drive_desc - the structure that holds the information
-+ * of the driving current
-+ * @min: the minimum current of this group
-+ * @max: the maximum current of this group
-+ * @step: the step current of this group
-+ * @scal: the weight factor
-+ *
-+ * formula: output = ((input) / step - 1) * scal
-+ */
-+struct mtk_drive_desc {
-+ u8 min;
-+ u8 max;
-+ u8 step;
-+ u8 scal;
-+};
-+
-+/* The groups of drive strength */
-+static const struct mtk_drive_desc mtk_drive[] = {
-+ [DRV_GRP0] = { 4, 16, 4, 1 },
-+ [DRV_GRP1] = { 4, 16, 4, 2 },
-+ [DRV_GRP2] = { 2, 8, 2, 1 },
-+ [DRV_GRP3] = { 2, 8, 2, 2 },
-+ [DRV_GRP4] = { 2, 16, 2, 1 },
-+};
-+
-+static void mtk_w32(struct mtk_pinctrl *pctl, u8 i, u32 reg, u32 val)
-+{
-+ writel_relaxed(val, pctl->base[i] + reg);
-+}
-+
-+static u32 mtk_r32(struct mtk_pinctrl *pctl, u8 i, u32 reg)
-+{
-+ return readl_relaxed(pctl->base[i] + reg);
-+}
-+
-+void mtk_rmw(struct mtk_pinctrl *pctl, u8 i, u32 reg, u32 mask, u32 set)
-+{
-+ u32 val;
-+
-+ val = mtk_r32(pctl, i, reg);
-+ val &= ~mask;
-+ val |= set;
-+ mtk_w32(pctl, i, reg, val);
-+}
-+
-+static int mtk_hw_pin_field_lookup(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc,
-+ int field, struct mtk_pin_field *pfd)
-+{
-+ const struct mtk_pin_field_calc *c, *e;
-+ const struct mtk_pin_reg_calc *rc;
-+ u32 bits;
-+
-+ if (hw->soc->reg_cal && hw->soc->reg_cal[field].range) {
-+ rc = &hw->soc->reg_cal[field];
-+ } else {
-+ dev_dbg(hw->dev,
-+ "Not support field %d for pin %d (%s)\n",
-+ field, desc->number, desc->name);
-+ return -ENOTSUPP;
-+ }
-+
-+ c = rc->range;
-+ e = c + rc->nranges;
-+
-+ while (c < e) {
-+ if (desc->number >= c->s_pin && desc->number <= c->e_pin)
-+ break;
-+ c++;
-+ }
-+
-+ if (c >= e) {
-+ dev_dbg(hw->dev, "Not support field %d for pin = %d (%s)\n",
-+ field, desc->number, desc->name);
-+ return -ENOTSUPP;
-+ }
-+
-+ if (c->i_base > hw->nbase - 1) {
-+ dev_err(hw->dev,
-+ "Invalid base for field %d for pin = %d (%s)\n",
-+ field, desc->number, desc->name);
-+ return -EINVAL;
-+ }
-+
-+ /* Calculated bits as the overall offset the pin is located at,
-+ * if c->fixed is held, that determines the all the pins in the
-+ * range use the same field with the s_pin.
-+ */
-+ bits = c->fixed ? c->s_bit : c->s_bit +
-+ (desc->number - c->s_pin) * (c->x_bits);
-+
-+ /* Fill pfd from bits. For example 32-bit register applied is assumed
-+ * when c->sz_reg is equal to 32.
-+ */
-+ pfd->index = c->i_base;
-+ pfd->offset = c->s_addr + c->x_addrs * (bits / c->sz_reg);
-+ pfd->bitpos = bits % c->sz_reg;
-+ pfd->mask = (1 << c->x_bits) - 1;
-+
-+ /* pfd->next is used for indicating that bit wrapping-around happens
-+ * which requires the manipulation for bit 0 starting in the next
-+ * register to form the complete field read/write.
-+ */
-+ pfd->next = pfd->bitpos + c->x_bits > c->sz_reg ? c->x_addrs : 0;
-+
-+ return 0;
-+}
-+
-+static int mtk_hw_pin_field_get(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc,
-+ int field, struct mtk_pin_field *pfd)
-+{
-+ if (field < 0 || field >= PINCTRL_PIN_REG_MAX) {
-+ dev_err(hw->dev, "Invalid Field %d\n", field);
-+ return -EINVAL;
-+ }
-+
-+ return mtk_hw_pin_field_lookup(hw, desc, field, pfd);
-+}
-+
-+static void mtk_hw_bits_part(struct mtk_pin_field *pf, int *h, int *l)
-+{
-+ *l = 32 - pf->bitpos;
-+ *h = get_count_order(pf->mask) - *l;
-+}
-+
-+static void mtk_hw_write_cross_field(struct mtk_pinctrl *hw,
-+ struct mtk_pin_field *pf, int value)
-+{
-+ int nbits_l, nbits_h;
-+
-+ mtk_hw_bits_part(pf, &nbits_h, &nbits_l);
-+
-+ mtk_rmw(hw, pf->index, pf->offset, pf->mask << pf->bitpos,
-+ (value & pf->mask) << pf->bitpos);
-+
-+ mtk_rmw(hw, pf->index, pf->offset + pf->next, BIT(nbits_h) - 1,
-+ (value & pf->mask) >> nbits_l);
-+}
-+
-+static void mtk_hw_read_cross_field(struct mtk_pinctrl *hw,
-+ struct mtk_pin_field *pf, int *value)
-+{
-+ int nbits_l, nbits_h, h, l;
-+
-+ mtk_hw_bits_part(pf, &nbits_h, &nbits_l);
-+
-+ l = (mtk_r32(hw, pf->index, pf->offset)
-+ >> pf->bitpos) & (BIT(nbits_l) - 1);
-+ h = (mtk_r32(hw, pf->index, pf->offset + pf->next))
-+ & (BIT(nbits_h) - 1);
-+
-+ *value = (h << nbits_l) | l;
-+}
-+
-+int mtk_hw_set_value(struct mtk_pinctrl *hw, const struct mtk_pin_desc *desc,
-+ int field, int value)
-+{
-+ struct mtk_pin_field pf;
-+ int err;
-+
-+ err = mtk_hw_pin_field_get(hw, desc, field, &pf);
-+ if (err)
-+ return err;
-+
-+ if (!pf.next)
-+ mtk_rmw(hw, pf.index, pf.offset, pf.mask << pf.bitpos,
-+ (value & pf.mask) << pf.bitpos);
-+ else
-+ mtk_hw_write_cross_field(hw, &pf, value);
-+
-+ return 0;
-+}
-+
-+int mtk_hw_get_value(struct mtk_pinctrl *hw, const struct mtk_pin_desc *desc,
-+ int field, int *value)
-+{
-+ struct mtk_pin_field pf;
-+ int err;
-+
-+ err = mtk_hw_pin_field_get(hw, desc, field, &pf);
-+ if (err)
-+ return err;
-+
-+ if (!pf.next)
-+ *value = (mtk_r32(hw, pf.index, pf.offset)
-+ >> pf.bitpos) & pf.mask;
-+ else
-+ mtk_hw_read_cross_field(hw, &pf, value);
-+
-+ return 0;
-+}
-+
-+static int mtk_xt_find_eint_num(struct mtk_pinctrl *hw, unsigned long eint_n)
-+{
-+ const struct mtk_pin_desc *desc;
-+ int i = 0;
-+
-+ desc = (const struct mtk_pin_desc *)hw->soc->pins;
-+
-+ while (i < hw->soc->npins) {
-+ if (desc[i].eint.eint_n == eint_n)
-+ return desc[i].number;
-+ i++;
-+ }
-+
-+ return EINT_NA;
-+}
-+
-+static int mtk_xt_get_gpio_n(void *data, unsigned long eint_n,
-+ unsigned int *gpio_n,
-+ struct gpio_chip **gpio_chip)
-+{
-+ struct mtk_pinctrl *hw = (struct mtk_pinctrl *)data;
-+ const struct mtk_pin_desc *desc;
-+
-+ desc = (const struct mtk_pin_desc *)hw->soc->pins;
-+ *gpio_chip = &hw->chip;
-+
-+ /* Be greedy to guess first gpio_n is equal to eint_n */
-+ if (desc[eint_n].eint.eint_n == eint_n)
-+ *gpio_n = eint_n;
-+ else
-+ *gpio_n = mtk_xt_find_eint_num(hw, eint_n);
-+
-+ return *gpio_n == EINT_NA ? -EINVAL : 0;
-+}
-+
-+static int mtk_xt_get_gpio_state(void *data, unsigned long eint_n)
-+{
-+ struct mtk_pinctrl *hw = (struct mtk_pinctrl *)data;
-+ const struct mtk_pin_desc *desc;
-+ struct gpio_chip *gpio_chip;
-+ unsigned int gpio_n;
-+ int value, err;
-+
-+ err = mtk_xt_get_gpio_n(hw, eint_n, &gpio_n, &gpio_chip);
-+ if (err)
-+ return err;
-+
-+ desc = (const struct mtk_pin_desc *)&hw->soc->pins[gpio_n];
-+
-+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DI, &value);
-+ if (err)
-+ return err;
-+
-+ return !!value;
-+}
-+
-+static int mtk_xt_set_gpio_as_eint(void *data, unsigned long eint_n)
-+{
-+ struct mtk_pinctrl *hw = (struct mtk_pinctrl *)data;
-+ const struct mtk_pin_desc *desc;
-+ struct gpio_chip *gpio_chip;
-+ unsigned int gpio_n;
-+ int err;
-+
-+ err = mtk_xt_get_gpio_n(hw, eint_n, &gpio_n, &gpio_chip);
-+ if (err)
-+ return err;
-+
-+ desc = (const struct mtk_pin_desc *)&hw->soc->pins[gpio_n];
-+
-+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_MODE,
-+ desc->eint.eint_m);
-+ if (err)
-+ return err;
-+
-+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR, MTK_INPUT);
-+ if (err)
-+ return err;
-+
-+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_SMT, MTK_ENABLE);
-+ /* SMT is supposed to be supported by every real GPIO and doesn't
-+ * support virtual GPIOs, so the extra condition err != -ENOTSUPP
-+ * is just for adding EINT support to these virtual GPIOs. It should
-+ * add an extra flag in the pin descriptor when more pins with
-+ * distinctive characteristic come out.
-+ */
-+ if (err && err != -ENOTSUPP)
-+ return err;
-+
-+ return 0;
-+}
-+
-+static const struct mtk_eint_xt mtk_eint_xt = {
-+ .get_gpio_n = mtk_xt_get_gpio_n,
-+ .get_gpio_state = mtk_xt_get_gpio_state,
-+ .set_gpio_as_eint = mtk_xt_set_gpio_as_eint,
-+};
-+
-+int mtk_build_eint(struct mtk_pinctrl *hw, struct platform_device *pdev)
-+{
-+ struct device_node *np = pdev->dev.of_node;
-+ struct resource *res;
-+
-+ if (!IS_ENABLED(CONFIG_EINT_MTK))
-+ return 0;
-+
-+ if (!of_property_read_bool(np, "interrupt-controller"))
-+ return -ENODEV;
-+
-+ hw->eint = devm_kzalloc(hw->dev, sizeof(*hw->eint), GFP_KERNEL);
-+ if (!hw->eint)
-+ return -ENOMEM;
-+
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "eint");
-+ if (!res) {
-+ dev_err(&pdev->dev, "Unable to get eint resource\n");
-+ return -ENODEV;
-+ }
-+
-+ hw->eint->base = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(hw->eint->base))
-+ return PTR_ERR(hw->eint->base);
-+
-+ hw->eint->irq = irq_of_parse_and_map(np, 0);
-+ if (!hw->eint->irq)
-+ return -EINVAL;
-+
-+ if (!hw->soc->eint_hw)
-+ return -ENODEV;
-+
-+ hw->eint->dev = &pdev->dev;
-+ hw->eint->hw = hw->soc->eint_hw;
-+ hw->eint->pctl = hw;
-+ hw->eint->gpio_xlate = &mtk_eint_xt;
-+
-+ return mtk_eint_do_init(hw->eint);
-+}
-+
-+/* Revision 0 */
-+int mtk_pinconf_bias_disable_set(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc)
-+{
-+ int err;
-+
-+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_PU,
-+ MTK_DISABLE);
-+ if (err)
-+ return err;
-+
-+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_PD,
-+ MTK_DISABLE);
-+ if (err)
-+ return err;
-+
-+ return 0;
-+}
-+
-+int mtk_pinconf_bias_disable_get(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc, int *res)
-+{
-+ int v, v2;
-+ int err;
-+
-+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PU, &v);
-+ if (err)
-+ return err;
-+
-+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PD, &v2);
-+ if (err)
-+ return err;
-+
-+ if (v == MTK_ENABLE || v2 == MTK_ENABLE)
-+ return -EINVAL;
-+
-+ *res = 1;
-+
-+ return 0;
-+}
-+
-+int mtk_pinconf_bias_set(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc, bool pullup)
-+{
-+ int err, arg;
-+
-+ arg = pullup ? 1 : 2;
-+
-+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_PU, arg & 1);
-+ if (err)
-+ return err;
-+
-+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_PD,
-+ !!(arg & 2));
-+ if (err)
-+ return err;
-+
-+ return 0;
-+}
-+
-+int mtk_pinconf_bias_get(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc, bool pullup, int *res)
-+{
-+ int reg, err, v;
-+
-+ reg = pullup ? PINCTRL_PIN_REG_PU : PINCTRL_PIN_REG_PD;
-+
-+ err = mtk_hw_get_value(hw, desc, reg, &v);
-+ if (err)
-+ return err;
-+
-+ if (!v)
-+ return -EINVAL;
-+
-+ *res = 1;
-+
-+ return 0;
-+}
-+
-+/* Revision 1 */
-+int mtk_pinconf_bias_disable_set_rev1(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc)
-+{
-+ int err;
-+
-+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_PULLEN,
-+ MTK_DISABLE);
-+ if (err)
-+ return err;
-+
-+ return 0;
-+}
-+
-+int mtk_pinconf_bias_disable_get_rev1(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc, int *res)
-+{
-+ int v, err;
-+
-+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PULLEN, &v);
-+ if (err)
-+ return err;
-+
-+ if (v == MTK_ENABLE)
-+ return -EINVAL;
-+
-+ *res = 1;
-+
-+ return 0;
-+}
-+
-+int mtk_pinconf_bias_set_rev1(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc, bool pullup)
-+{
-+ int err, arg;
-+
-+ arg = pullup ? MTK_PULLUP : MTK_PULLDOWN;
-+
-+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_PULLEN,
-+ MTK_ENABLE);
-+ if (err)
-+ return err;
-+
-+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_PULLSEL, arg);
-+ if (err)
-+ return err;
-+
-+ return 0;
-+}
-+
-+int mtk_pinconf_bias_get_rev1(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc, bool pullup,
-+ int *res)
-+{
-+ int err, v;
-+
-+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PULLEN, &v);
-+ if (err)
-+ return err;
-+
-+ if (v == MTK_DISABLE)
-+ return -EINVAL;
-+
-+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PULLSEL, &v);
-+ if (err)
-+ return err;
-+
-+ if (pullup ^ (v == MTK_PULLUP))
-+ return -EINVAL;
-+
-+ *res = 1;
-+
-+ return 0;
-+}
-+
-+/* Revision 0 */
-+int mtk_pinconf_drive_set(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc, u32 arg)
-+{
-+ const struct mtk_drive_desc *tb;
-+ int err = -ENOTSUPP;
-+
-+ tb = &mtk_drive[desc->drv_n];
-+ /* 4mA when (e8, e4) = (0, 0)
-+ * 8mA when (e8, e4) = (0, 1)
-+ * 12mA when (e8, e4) = (1, 0)
-+ * 16mA when (e8, e4) = (1, 1)
-+ */
-+ if ((arg >= tb->min && arg <= tb->max) && !(arg % tb->step)) {
-+ arg = (arg / tb->step - 1) * tb->scal;
-+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_E4,
-+ arg & 0x1);
-+ if (err)
-+ return err;
-+
-+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_E8,
-+ (arg & 0x2) >> 1);
-+ if (err)
-+ return err;
-+ }
-+
-+ return err;
-+}
-+
-+int mtk_pinconf_drive_get(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc, int *val)
-+{
-+ const struct mtk_drive_desc *tb;
-+ int err, val1, val2;
-+
-+ tb = &mtk_drive[desc->drv_n];
-+
-+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_E4, &val1);
-+ if (err)
-+ return err;
-+
-+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_E8, &val2);
-+ if (err)
-+ return err;
-+
-+ /* 4mA when (e8, e4) = (0, 0); 8mA when (e8, e4) = (0, 1)
-+ * 12mA when (e8, e4) = (1, 0); 16mA when (e8, e4) = (1, 1)
-+ */
-+ *val = (((val2 << 1) + val1) / tb->scal + 1) * tb->step;
-+
-+ return 0;
-+}
-+
-+/* Revision 1 */
-+int mtk_pinconf_drive_set_rev1(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc, u32 arg)
-+{
-+ const struct mtk_drive_desc *tb;
-+ int err = -ENOTSUPP;
-+
-+ tb = &mtk_drive[desc->drv_n];
-+
-+ if ((arg >= tb->min && arg <= tb->max) && !(arg % tb->step)) {
-+ arg = (arg / tb->step - 1) * tb->scal;
-+
-+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV,
-+ arg);
-+ if (err)
-+ return err;
-+ }
-+
-+ return err;
-+}
-+
-+int mtk_pinconf_drive_get_rev1(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc, int *val)
-+{
-+ const struct mtk_drive_desc *tb;
-+ int err, val1;
-+
-+ tb = &mtk_drive[desc->drv_n];
-+
-+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV, &val1);
-+ if (err)
-+ return err;
-+
-+ *val = ((val1 & 0x7) / tb->scal + 1) * tb->step;
-+
-+ return 0;
-+}
-+
-+int mtk_pinconf_adv_pull_set(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc, bool pullup,
-+ u32 arg)
-+{
-+ int err;
-+
-+ /* 10K off & 50K (75K) off, when (R0, R1) = (0, 0);
-+ * 10K off & 50K (75K) on, when (R0, R1) = (0, 1);
-+ * 10K on & 50K (75K) off, when (R0, R1) = (1, 0);
-+ * 10K on & 50K (75K) on, when (R0, R1) = (1, 1)
-+ */
-+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_R0, arg & 1);
-+ if (err)
-+ return 0;
-+
-+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_R1,
-+ !!(arg & 2));
-+ if (err)
-+ return 0;
-+
-+ arg = pullup ? 0 : 1;
-+
-+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_PUPD, arg);
-+
-+ /* If PUPD register is not supported for that pin, let's fallback to
-+ * general bias control.
-+ */
-+ if (err == -ENOTSUPP) {
-+ if (hw->soc->bias_set) {
-+ err = hw->soc->bias_set(hw, desc, pullup);
-+ if (err)
-+ return err;
-+ } else {
-+ return -ENOTSUPP;
-+ }
-+ }
-+
-+ return err;
-+}
-+
-+int mtk_pinconf_adv_pull_get(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc, bool pullup,
-+ u32 *val)
-+{
-+ u32 t, t2;
-+ int err;
-+
-+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_PUPD, &t);
-+
-+ /* If PUPD register is not supported for that pin, let's fallback to
-+ * general bias control.
-+ */
-+ if (err == -ENOTSUPP) {
-+ if (hw->soc->bias_get) {
-+ err = hw->soc->bias_get(hw, desc, pullup, val);
-+ if (err)
-+ return err;
-+ } else {
-+ return -ENOTSUPP;
-+ }
-+ } else {
-+ /* t == 0 supposes PULLUP for the customized PULL setup */
-+ if (err)
-+ return err;
-+
-+ if (pullup ^ !t)
-+ return -EINVAL;
-+ }
-+
-+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_R0, &t);
-+ if (err)
-+ return err;
-+
-+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_R1, &t2);
-+ if (err)
-+ return err;
-+
-+ *val = (t | t2 << 1) & 0x7;
-+
-+ return 0;
-+}
-+
-+int mtk_pinconf_adv_drive_set(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc, u32 arg)
-+{
-+ int err;
-+ int en = arg & 1;
-+ int e0 = !!(arg & 2);
-+ int e1 = !!(arg & 4);
-+
-+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV_EN, en);
-+ if (err)
-+ return err;
-+
-+ if (!en)
-+ return err;
-+
-+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV_E0, e0);
-+ if (err)
-+ return err;
-+
-+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DRV_E1, e1);
-+ if (err)
-+ return err;
-+
-+ return err;
-+}
-+
-+int mtk_pinconf_adv_drive_get(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc, u32 *val)
-+{
-+ u32 en, e0, e1;
-+ int err;
-+
-+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV_EN, &en);
-+ if (err)
-+ return err;
-+
-+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV_E0, &e0);
-+ if (err)
-+ return err;
-+
-+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DRV_E1, &e1);
-+ if (err)
-+ return err;
-+
-+ *val = (en | e0 << 1 | e1 << 2) & 0x7;
-+
-+ return 0;
-+}
---- /dev/null
-+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.h
-@@ -0,0 +1,302 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+/*
-+ * Copyright (C) 2018 MediaTek Inc.
-+ *
-+ * Author: Sean Wang <sean.wang@mediatek.com>
-+ *
-+ */
-+
-+#ifndef __PINCTRL_MTK_COMMON_V2_H
-+#define __PINCTRL_MTK_COMMON_V2_H
-+
-+#include <linux/gpio/driver.h>
-+
-+#define MTK_INPUT 0
-+#define MTK_OUTPUT 1
-+#define MTK_DISABLE 0
-+#define MTK_ENABLE 1
-+#define MTK_PULLDOWN 0
-+#define MTK_PULLUP 1
-+
-+#define EINT_NA U16_MAX
-+#define NO_EINT_SUPPORT EINT_NA
-+
-+#define PIN_FIELD_CALC(_s_pin, _e_pin, _i_base, _s_addr, _x_addrs, \
-+ _s_bit, _x_bits, _sz_reg, _fixed) { \
-+ .s_pin = _s_pin, \
-+ .e_pin = _e_pin, \
-+ .i_base = _i_base, \
-+ .s_addr = _s_addr, \
-+ .x_addrs = _x_addrs, \
-+ .s_bit = _s_bit, \
-+ .x_bits = _x_bits, \
-+ .sz_reg = _sz_reg, \
-+ .fixed = _fixed, \
-+ }
-+
-+#define PIN_FIELD(_s_pin, _e_pin, _s_addr, _x_addrs, _s_bit, _x_bits) \
-+ PIN_FIELD_CALC(_s_pin, _e_pin, 0, _s_addr, _x_addrs, _s_bit, \
-+ _x_bits, 32, 0)
-+
-+#define PINS_FIELD(_s_pin, _e_pin, _s_addr, _x_addrs, _s_bit, _x_bits) \
-+ PIN_FIELD_CALC(_s_pin, _e_pin, 0, _s_addr, _x_addrs, _s_bit, \
-+ _x_bits, 32, 1)
-+
-+/* List these attributes which could be modified for the pin */
-+enum {
-+ PINCTRL_PIN_REG_MODE,
-+ PINCTRL_PIN_REG_DIR,
-+ PINCTRL_PIN_REG_DI,
-+ PINCTRL_PIN_REG_DO,
-+ PINCTRL_PIN_REG_SR,
-+ PINCTRL_PIN_REG_SMT,
-+ PINCTRL_PIN_REG_PD,
-+ PINCTRL_PIN_REG_PU,
-+ PINCTRL_PIN_REG_E4,
-+ PINCTRL_PIN_REG_E8,
-+ PINCTRL_PIN_REG_TDSEL,
-+ PINCTRL_PIN_REG_RDSEL,
-+ PINCTRL_PIN_REG_DRV,
-+ PINCTRL_PIN_REG_PUPD,
-+ PINCTRL_PIN_REG_R0,
-+ PINCTRL_PIN_REG_R1,
-+ PINCTRL_PIN_REG_IES,
-+ PINCTRL_PIN_REG_PULLEN,
-+ PINCTRL_PIN_REG_PULLSEL,
-+ PINCTRL_PIN_REG_DRV_EN,
-+ PINCTRL_PIN_REG_DRV_E0,
-+ PINCTRL_PIN_REG_DRV_E1,
-+ PINCTRL_PIN_REG_MAX,
-+};
-+
-+/* Group the pins by the driving current */
-+enum {
-+ DRV_FIXED,
-+ DRV_GRP0,
-+ DRV_GRP1,
-+ DRV_GRP2,
-+ DRV_GRP3,
-+ DRV_GRP4,
-+ DRV_GRP_MAX,
-+};
-+
-+static const char * const mtk_default_register_base_names[] = {
-+ "base",
-+};
-+
-+/* struct mtk_pin_field - the structure that holds the information of the field
-+ * used to describe the attribute for the pin
-+ * @base: the index pointing to the entry in base address list
-+ * @offset: the register offset relative to the base address
-+ * @mask: the mask used to filter out the field from the register
-+ * @bitpos: the start bit relative to the register
-+ * @next: the indication that the field would be extended to the
-+ next register
-+ */
-+struct mtk_pin_field {
-+ u8 index;
-+ u32 offset;
-+ u32 mask;
-+ u8 bitpos;
-+ u8 next;
-+};
-+
-+/* struct mtk_pin_field_calc - the structure that holds the range providing
-+ * the guide used to look up the relevant field
-+ * @s_pin: the start pin within the range
-+ * @e_pin: the end pin within the range
-+ * @i_base: the index pointing to the entry in base address list
-+ * @s_addr: the start address for the range
-+ * @x_addrs: the address distance between two consecutive registers
-+ * within the range
-+ * @s_bit: the start bit for the first register within the range
-+ * @x_bits: the bit distance between two consecutive pins within
-+ * the range
-+ * @sz_reg: the size of bits in a register
-+ * @fixed: the consecutive pins share the same bits with the 1st
-+ * pin
-+ */
-+struct mtk_pin_field_calc {
-+ u16 s_pin;
-+ u16 e_pin;
-+ u8 i_base;
-+ u32 s_addr;
-+ u8 x_addrs;
-+ u8 s_bit;
-+ u8 x_bits;
-+ u8 sz_reg;
-+ u8 fixed;
-+};
-+
-+/* struct mtk_pin_reg_calc - the structure that holds all ranges used to
-+ * determine which register the pin would make use of
-+ * for certain pin attribute.
-+ * @range: the start address for the range
-+ * @nranges: the number of items in the range
-+ */
-+struct mtk_pin_reg_calc {
-+ const struct mtk_pin_field_calc *range;
-+ unsigned int nranges;
-+};
-+
-+/**
-+ * struct mtk_func_desc - the structure that providing information
-+ * all the funcs for this pin
-+ * @name: the name of function
-+ * @muxval: the mux to the function
-+ */
-+struct mtk_func_desc {
-+ const char *name;
-+ u8 muxval;
-+};
-+
-+/**
-+ * struct mtk_eint_desc - the structure that providing information
-+ * for eint data per pin
-+ * @eint_m: the eint mux for this pin
-+ * @eitn_n: the eint number for this pin
-+ */
-+struct mtk_eint_desc {
-+ u16 eint_m;
-+ u16 eint_n;
-+};
-+
-+/**
-+ * struct mtk_pin_desc - the structure that providing information
-+ * for each pin of chips
-+ * @number: unique pin number from the global pin number space
-+ * @name: name for this pin
-+ * @eint: the eint data for this pin
-+ * @drv_n: the index with the driving group
-+ * @funcs: all available functions for this pins (only used in
-+ * those drivers compatible to pinctrl-mtk-common.c-like
-+ * ones)
-+ */
-+struct mtk_pin_desc {
-+ unsigned int number;
-+ const char *name;
-+ struct mtk_eint_desc eint;
-+ u8 drv_n;
-+ struct mtk_func_desc *funcs;
-+};
-+
-+struct mtk_pinctrl_group {
-+ const char *name;
-+ unsigned long config;
-+ unsigned pin;
-+};
-+
-+struct mtk_pinctrl;
-+
-+/* struct mtk_pin_soc - the structure that holds SoC-specific data */
-+struct mtk_pin_soc {
-+ const struct mtk_pin_reg_calc *reg_cal;
-+ const struct mtk_pin_desc *pins;
-+ unsigned int npins;
-+ const struct group_desc *grps;
-+ unsigned int ngrps;
-+ const struct function_desc *funcs;
-+ unsigned int nfuncs;
-+ const struct mtk_eint_regs *eint_regs;
-+ const struct mtk_eint_hw *eint_hw;
-+
-+ /* Specific parameters per SoC */
-+ u8 gpio_m;
-+ bool ies_present;
-+ const char * const *base_names;
-+ unsigned int nbase_names;
-+
-+ /* Specific pinconfig operations */
-+ int (*bias_disable_set)(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc);
-+ int (*bias_disable_get)(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc, int *res);
-+ int (*bias_set)(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc, bool pullup);
-+ int (*bias_get)(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc, bool pullup, int *res);
-+
-+ int (*drive_set)(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc, u32 arg);
-+ int (*drive_get)(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc, int *val);
-+
-+ int (*adv_pull_set)(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc, bool pullup,
-+ u32 arg);
-+ int (*adv_pull_get)(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc, bool pullup,
-+ u32 *val);
-+ int (*adv_drive_set)(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc, u32 arg);
-+ int (*adv_drive_get)(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc, u32 *val);
-+
-+ /* Specific driver data */
-+ void *driver_data;
-+};
-+
-+struct mtk_pinctrl {
-+ struct pinctrl_dev *pctrl;
-+ void __iomem **base;
-+ u8 nbase;
-+ struct device *dev;
-+ struct gpio_chip chip;
-+ const struct mtk_pin_soc *soc;
-+ struct mtk_eint *eint;
-+ struct mtk_pinctrl_group *groups;
-+ const char **grp_names;
-+};
-+
-+void mtk_rmw(struct mtk_pinctrl *pctl, u8 i, u32 reg, u32 mask, u32 set);
-+
-+int mtk_hw_set_value(struct mtk_pinctrl *hw, const struct mtk_pin_desc *desc,
-+ int field, int value);
-+int mtk_hw_get_value(struct mtk_pinctrl *hw, const struct mtk_pin_desc *desc,
-+ int field, int *value);
-+
-+int mtk_build_eint(struct mtk_pinctrl *hw, struct platform_device *pdev);
-+
-+int mtk_pinconf_bias_disable_set(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc);
-+int mtk_pinconf_bias_disable_get(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc, int *res);
-+int mtk_pinconf_bias_set(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc, bool pullup);
-+int mtk_pinconf_bias_get(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc, bool pullup,
-+ int *res);
-+
-+int mtk_pinconf_bias_disable_set_rev1(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc);
-+int mtk_pinconf_bias_disable_get_rev1(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc,
-+ int *res);
-+int mtk_pinconf_bias_set_rev1(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc, bool pullup);
-+int mtk_pinconf_bias_get_rev1(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc, bool pullup,
-+ int *res);
-+
-+int mtk_pinconf_drive_set(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc, u32 arg);
-+int mtk_pinconf_drive_get(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc, int *val);
-+
-+int mtk_pinconf_drive_set_rev1(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc, u32 arg);
-+int mtk_pinconf_drive_get_rev1(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc, int *val);
-+
-+int mtk_pinconf_adv_pull_set(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc, bool pullup,
-+ u32 arg);
-+int mtk_pinconf_adv_pull_get(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc, bool pullup,
-+ u32 *val);
-+int mtk_pinconf_adv_drive_set(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc, u32 arg);
-+int mtk_pinconf_adv_drive_get(struct mtk_pinctrl *hw,
-+ const struct mtk_pin_desc *desc, u32 *val);
-+
-+#endif /* __PINCTRL_MTK_COMMON_V2_H */
---- a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
-+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
-@@ -514,8 +514,8 @@ static int mtk_pctrl_dt_subnode_to_map(s
-
- pins = of_find_property(node, "pinmux", NULL);
- if (!pins) {
-- dev_err(pctl->dev, "missing pins property in node %s .\n",
-- node->name);
-+ dev_err(pctl->dev, "missing pins property in node %pOFn .\n",
-+ node);
- return -EINVAL;
- }
-
---- /dev/null
-+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-mt6765.h
-@@ -0,0 +1,1754 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+/*
-+ * Copyright (C) 2018 MediaTek Inc.
-+ *
-+ * Author: ZH Chen <zh.chen@mediatek.com>
-+ *
-+ */
-+
-+#ifndef __PINCTRL_MTK_MT6765_H
-+#define __PINCTRL_MTK_MT6765_H
-+
-+#include "pinctrl-paris.h"
-+
-+static struct mtk_pin_desc mtk_pins_mt6765[] = {
-+ MTK_PIN(
-+ 0, "GPIO0",
-+ MTK_EINT_FUNCTION(0, 0),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO0"),
-+ MTK_FUNCTION(1, "UTXD1"),
-+ MTK_FUNCTION(2, "CLKM0"),
-+ MTK_FUNCTION(3, "MD_INT0"),
-+ MTK_FUNCTION(4, "I2S0_MCK"),
-+ MTK_FUNCTION(5, "MD_UTXD1"),
-+ MTK_FUNCTION(6, "TP_GPIO0_AO"),
-+ MTK_FUNCTION(7, "DBG_MON_B9")
-+ ),
-+ MTK_PIN(
-+ 1, "GPIO1",
-+ MTK_EINT_FUNCTION(0, 1),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO1"),
-+ MTK_FUNCTION(1, "URXD1"),
-+ MTK_FUNCTION(2, "CLKM1"),
-+ MTK_FUNCTION(4, "I2S0_BCK"),
-+ MTK_FUNCTION(5, "MD_URXD1"),
-+ MTK_FUNCTION(6, "TP_GPIO1_AO"),
-+ MTK_FUNCTION(7, "DBG_MON_B10")
-+ ),
-+ MTK_PIN(
-+ 2, "GPIO2",
-+ MTK_EINT_FUNCTION(0, 2),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO2"),
-+ MTK_FUNCTION(1, "UCTS0"),
-+ MTK_FUNCTION(2, "CLKM2"),
-+ MTK_FUNCTION(3, "UTXD1"),
-+ MTK_FUNCTION(4, "I2S0_LRCK"),
-+ MTK_FUNCTION(5, "ANT_SEL6"),
-+ MTK_FUNCTION(6, "TP_GPIO2_AO"),
-+ MTK_FUNCTION(7, "DBG_MON_B11")
-+ ),
-+ MTK_PIN(
-+ 3, "GPIO3",
-+ MTK_EINT_FUNCTION(0, 3),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO3"),
-+ MTK_FUNCTION(1, "URTS0"),
-+ MTK_FUNCTION(2, "CLKM3"),
-+ MTK_FUNCTION(3, "URXD1"),
-+ MTK_FUNCTION(4, "I2S0_DI"),
-+ MTK_FUNCTION(5, "ANT_SEL7"),
-+ MTK_FUNCTION(6, "TP_GPIO3_AO"),
-+ MTK_FUNCTION(7, "DBG_MON_B12")
-+ ),
-+ MTK_PIN(
-+ 4, "GPIO4",
-+ MTK_EINT_FUNCTION(0, 4),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO4"),
-+ MTK_FUNCTION(1, "SPI1_B_MI"),
-+ MTK_FUNCTION(2, "SCP_SPI1_MI"),
-+ MTK_FUNCTION(3, "UCTS0"),
-+ MTK_FUNCTION(4, "I2S3_MCK"),
-+ MTK_FUNCTION(5, "SSPM_URXD_AO"),
-+ MTK_FUNCTION(6, "TP_GPIO4_AO")
-+ ),
-+ MTK_PIN(
-+ 5, "GPIO5",
-+ MTK_EINT_FUNCTION(0, 5),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO5"),
-+ MTK_FUNCTION(1, "SPI1_B_CSB"),
-+ MTK_FUNCTION(2, "SCP_SPI1_CS"),
-+ MTK_FUNCTION(3, "URTS0"),
-+ MTK_FUNCTION(4, "I2S3_BCK"),
-+ MTK_FUNCTION(5, "SSPM_UTXD_AO"),
-+ MTK_FUNCTION(6, "TP_GPIO5_AO")
-+ ),
-+ MTK_PIN(
-+ 6, "GPIO6",
-+ MTK_EINT_FUNCTION(0, 6),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO6"),
-+ MTK_FUNCTION(1, "SPI1_B_MO"),
-+ MTK_FUNCTION(2, "SCP_SPI1_MO"),
-+ MTK_FUNCTION(3, "PWM0"),
-+ MTK_FUNCTION(4, "I2S3_LRCK"),
-+ MTK_FUNCTION(5, "MD_UTXD0"),
-+ MTK_FUNCTION(6, "TP_GPIO6_AO")
-+ ),
-+ MTK_PIN(
-+ 7, "GPIO7",
-+ MTK_EINT_FUNCTION(0, 7),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO7"),
-+ MTK_FUNCTION(1, "SPI1_B_CLK"),
-+ MTK_FUNCTION(2, "SCP_SPI1_CK"),
-+ MTK_FUNCTION(3, "PWM1"),
-+ MTK_FUNCTION(4, "I2S3_DO"),
-+ MTK_FUNCTION(5, "MD_URXD0"),
-+ MTK_FUNCTION(6, "TP_GPIO7_AO")
-+ ),
-+ MTK_PIN(
-+ 8, "GPIO8",
-+ MTK_EINT_FUNCTION(0, 8),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO8"),
-+ MTK_FUNCTION(1, "UTXD1"),
-+ MTK_FUNCTION(2, "SRCLKENAI0"),
-+ MTK_FUNCTION(3, "MD_INT1_C2K_UIM0_HOT_PLUG"),
-+ MTK_FUNCTION(4, "ANT_SEL3"),
-+ MTK_FUNCTION(5, "MFG_JTAG_TRSTN"),
-+ MTK_FUNCTION(6, "I2S2_MCK"),
-+ MTK_FUNCTION(7, "JTRSTN_SEL1")
-+ ),
-+ MTK_PIN(
-+ 9, "GPIO9",
-+ MTK_EINT_FUNCTION(0, 9),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO9"),
-+ MTK_FUNCTION(1, "MD_INT0"),
-+ MTK_FUNCTION(2, "CMMCLK2"),
-+ MTK_FUNCTION(3, "CONN_MCU_TRST_B"),
-+ MTK_FUNCTION(4, "IDDIG"),
-+ MTK_FUNCTION(5, "SDA_6306"),
-+ MTK_FUNCTION(6, "MCUPM_JTAG_TRSTN"),
-+ MTK_FUNCTION(7, "DBG_MON_B22")
-+ ),
-+ MTK_PIN(
-+ 10, "GPIO10",
-+ MTK_EINT_FUNCTION(0, 10),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO10"),
-+ MTK_FUNCTION(1, "MD_INT1_C2K_UIM0_HOT_PLUG"),
-+ MTK_FUNCTION(3, "CONN_MCU_DBGI_N"),
-+ MTK_FUNCTION(4, "SRCLKENAI1"),
-+ MTK_FUNCTION(5, "EXT_FRAME_SYNC"),
-+ MTK_FUNCTION(6, "CMVREF1"),
-+ MTK_FUNCTION(7, "DBG_MON_B23")
-+ ),
-+ MTK_PIN(
-+ 11, "GPIO11",
-+ MTK_EINT_FUNCTION(0, 11),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO11"),
-+ MTK_FUNCTION(1, "MD_INT2_C2K_UIM1_HOT_PLUG"),
-+ MTK_FUNCTION(2, "CLKM3"),
-+ MTK_FUNCTION(3, "ANT_SEL6"),
-+ MTK_FUNCTION(4, "SRCLKENAI0"),
-+ MTK_FUNCTION(5, "EXT_FRAME_SYNC"),
-+ MTK_FUNCTION(6, "UCTS1"),
-+ MTK_FUNCTION(7, "DBG_MON_B24")
-+ ),
-+ MTK_PIN(
-+ 12, "GPIO12",
-+ MTK_EINT_FUNCTION(0, 12),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO12"),
-+ MTK_FUNCTION(1, "PWM0"),
-+ MTK_FUNCTION(2, "SRCLKENAI1"),
-+ MTK_FUNCTION(3, "EXT_FRAME_SYNC"),
-+ MTK_FUNCTION(4, "MD_INT0"),
-+ MTK_FUNCTION(5, "DVFSRC_EXT_REQ"),
-+ MTK_FUNCTION(6, "URTS1")
-+ ),
-+ MTK_PIN(
-+ 13, "GPIO13",
-+ MTK_EINT_FUNCTION(0, 13),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO13"),
-+ MTK_FUNCTION(1, "ANT_SEL0"),
-+ MTK_FUNCTION(2, "SPI4_MI"),
-+ MTK_FUNCTION(3, "SCP_SPI0_MI"),
-+ MTK_FUNCTION(4, "MD_URXD0"),
-+ MTK_FUNCTION(5, "CLKM0"),
-+ MTK_FUNCTION(6, "I2S0_MCK"),
-+ MTK_FUNCTION(7, "DBG_MON_A0")
-+ ),
-+ MTK_PIN(
-+ 14, "GPIO14",
-+ MTK_EINT_FUNCTION(0, 14),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO14"),
-+ MTK_FUNCTION(1, "ANT_SEL1"),
-+ MTK_FUNCTION(2, "SPI4_CSB"),
-+ MTK_FUNCTION(3, "SCP_SPI0_CS"),
-+ MTK_FUNCTION(4, "MD_UTXD0"),
-+ MTK_FUNCTION(5, "CLKM1"),
-+ MTK_FUNCTION(6, "I2S0_BCK"),
-+ MTK_FUNCTION(7, "DBG_MON_A1")
-+ ),
-+ MTK_PIN(
-+ 15, "GPIO15",
-+ MTK_EINT_FUNCTION(0, 15),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO15"),
-+ MTK_FUNCTION(1, "ANT_SEL2"),
-+ MTK_FUNCTION(2, "SPI4_MO"),
-+ MTK_FUNCTION(3, "SCP_SPI0_MO"),
-+ MTK_FUNCTION(4, "MD_URXD1"),
-+ MTK_FUNCTION(5, "CLKM2"),
-+ MTK_FUNCTION(6, "I2S0_LRCK"),
-+ MTK_FUNCTION(7, "DBG_MON_A2")
-+ ),
-+ MTK_PIN(
-+ 16, "GPIO16",
-+ MTK_EINT_FUNCTION(0, 16),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO16"),
-+ MTK_FUNCTION(1, "ANT_SEL3"),
-+ MTK_FUNCTION(2, "SPI4_CLK"),
-+ MTK_FUNCTION(3, "SCP_SPI0_CK"),
-+ MTK_FUNCTION(4, "MD_UTXD1"),
-+ MTK_FUNCTION(5, "CLKM3"),
-+ MTK_FUNCTION(6, "I2S3_MCK"),
-+ MTK_FUNCTION(7, "DBG_MON_A3")
-+ ),
-+ MTK_PIN(
-+ 17, "GPIO17",
-+ MTK_EINT_FUNCTION(0, 17),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO17"),
-+ MTK_FUNCTION(1, "ANT_SEL4"),
-+ MTK_FUNCTION(2, "SPI2_MO"),
-+ MTK_FUNCTION(3, "SCP_SPI0_MO"),
-+ MTK_FUNCTION(4, "PWM1"),
-+ MTK_FUNCTION(5, "IDDIG"),
-+ MTK_FUNCTION(6, "I2S0_DI"),
-+ MTK_FUNCTION(7, "DBG_MON_A4")
-+ ),
-+ MTK_PIN(
-+ 18, "GPIO18",
-+ MTK_EINT_FUNCTION(0, 18),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO18"),
-+ MTK_FUNCTION(1, "ANT_SEL5"),
-+ MTK_FUNCTION(2, "SPI2_CLK"),
-+ MTK_FUNCTION(3, "SCP_SPI0_CK"),
-+ MTK_FUNCTION(4, "MD_INT0"),
-+ MTK_FUNCTION(5, "USB_DRVVBUS"),
-+ MTK_FUNCTION(6, "I2S3_BCK"),
-+ MTK_FUNCTION(7, "DBG_MON_A5")
-+ ),
-+ MTK_PIN(
-+ 19, "GPIO19",
-+ MTK_EINT_FUNCTION(0, 19),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO19"),
-+ MTK_FUNCTION(1, "ANT_SEL6"),
-+ MTK_FUNCTION(2, "SPI2_MI"),
-+ MTK_FUNCTION(3, "SCP_SPI0_MI"),
-+ MTK_FUNCTION(4, "MD_INT2_C2K_UIM1_HOT_PLUG"),
-+ MTK_FUNCTION(6, "I2S3_LRCK"),
-+ MTK_FUNCTION(7, "DBG_MON_A6")
-+ ),
-+ MTK_PIN(
-+ 20, "GPIO20",
-+ MTK_EINT_FUNCTION(0, 20),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO20"),
-+ MTK_FUNCTION(1, "ANT_SEL7"),
-+ MTK_FUNCTION(2, "SPI2_CSB"),
-+ MTK_FUNCTION(3, "SCP_SPI0_CS"),
-+ MTK_FUNCTION(4, "MD_INT1_C2K_UIM0_HOT_PLUG"),
-+ MTK_FUNCTION(5, "CMMCLK3"),
-+ MTK_FUNCTION(6, "I2S3_DO"),
-+ MTK_FUNCTION(7, "DBG_MON_A7")
-+ ),
-+ MTK_PIN(
-+ 21, "GPIO21",
-+ MTK_EINT_FUNCTION(0, 21),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO21"),
-+ MTK_FUNCTION(1, "SPI3_MI"),
-+ MTK_FUNCTION(2, "SRCLKENAI1"),
-+ MTK_FUNCTION(3, "DAP_MD32_SWD"),
-+ MTK_FUNCTION(4, "CMVREF0"),
-+ MTK_FUNCTION(5, "SCP_SPI0_MI"),
-+ MTK_FUNCTION(6, "I2S2_MCK"),
-+ MTK_FUNCTION(7, "DBG_MON_A8")
-+ ),
-+ MTK_PIN(
-+ 22, "GPIO22",
-+ MTK_EINT_FUNCTION(0, 22),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO22"),
-+ MTK_FUNCTION(1, "SPI3_CSB"),
-+ MTK_FUNCTION(2, "SRCLKENAI0"),
-+ MTK_FUNCTION(3, "DAP_MD32_SWCK"),
-+ MTK_FUNCTION(4, "CMVREF1"),
-+ MTK_FUNCTION(5, "SCP_SPI0_CS"),
-+ MTK_FUNCTION(6, "I2S2_BCK"),
-+ MTK_FUNCTION(7, "DBG_MON_A9")
-+ ),
-+ MTK_PIN(
-+ 23, "GPIO23",
-+ MTK_EINT_FUNCTION(0, 23),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO23"),
-+ MTK_FUNCTION(1, "SPI3_MO"),
-+ MTK_FUNCTION(2, "PWM0"),
-+ MTK_FUNCTION(3, "KPROW7"),
-+ MTK_FUNCTION(4, "ANT_SEL3"),
-+ MTK_FUNCTION(5, "SCP_SPI0_MO"),
-+ MTK_FUNCTION(6, "I2S2_LRCK"),
-+ MTK_FUNCTION(7, "DBG_MON_A10")
-+ ),
-+ MTK_PIN(
-+ 24, "GPIO24",
-+ MTK_EINT_FUNCTION(0, 24),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO24"),
-+ MTK_FUNCTION(1, "SPI3_CLK"),
-+ MTK_FUNCTION(2, "UDI_TCK"),
-+ MTK_FUNCTION(3, "IO_JTAG_TCK"),
-+ MTK_FUNCTION(4, "SSPM_JTAG_TCK"),
-+ MTK_FUNCTION(5, "SCP_SPI0_CK"),
-+ MTK_FUNCTION(6, "I2S2_DI"),
-+ MTK_FUNCTION(7, "DBG_MON_A11")
-+ ),
-+ MTK_PIN(
-+ 25, "GPIO25",
-+ MTK_EINT_FUNCTION(0, 25),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO25"),
-+ MTK_FUNCTION(1, "SPI1_A_MI"),
-+ MTK_FUNCTION(2, "UDI_TMS"),
-+ MTK_FUNCTION(3, "IO_JTAG_TMS"),
-+ MTK_FUNCTION(4, "SSPM_JTAG_TMS"),
-+ MTK_FUNCTION(5, "KPROW3"),
-+ MTK_FUNCTION(6, "I2S1_MCK"),
-+ MTK_FUNCTION(7, "DBG_MON_A12")
-+ ),
-+ MTK_PIN(
-+ 26, "GPIO26",
-+ MTK_EINT_FUNCTION(0, 26),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO26"),
-+ MTK_FUNCTION(1, "SPI1_A_CSB"),
-+ MTK_FUNCTION(2, "UDI_TDI"),
-+ MTK_FUNCTION(3, "IO_JTAG_TDI"),
-+ MTK_FUNCTION(4, "SSPM_JTAG_TDI"),
-+ MTK_FUNCTION(5, "KPROW4"),
-+ MTK_FUNCTION(6, "I2S1_BCK"),
-+ MTK_FUNCTION(7, "DBG_MON_A13")
-+ ),
-+ MTK_PIN(
-+ 27, "GPIO27",
-+ MTK_EINT_FUNCTION(0, 27),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO27"),
-+ MTK_FUNCTION(1, "SPI1_A_MO"),
-+ MTK_FUNCTION(2, "UDI_TDO"),
-+ MTK_FUNCTION(3, "IO_JTAG_TDO"),
-+ MTK_FUNCTION(4, "SSPM_JTAG_TDO"),
-+ MTK_FUNCTION(5, "KPROW5"),
-+ MTK_FUNCTION(6, "I2S1_LRCK"),
-+ MTK_FUNCTION(7, "DBG_MON_A14")
-+ ),
-+ MTK_PIN(
-+ 28, "GPIO28",
-+ MTK_EINT_FUNCTION(0, 28),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO28"),
-+ MTK_FUNCTION(1, "SPI1_A_CLK"),
-+ MTK_FUNCTION(2, "UDI_NTRST"),
-+ MTK_FUNCTION(3, "IO_JTAG_TRSTN"),
-+ MTK_FUNCTION(4, "SSPM_JTAG_TRSTN"),
-+ MTK_FUNCTION(5, "KPROW6"),
-+ MTK_FUNCTION(6, "I2S1_DO"),
-+ MTK_FUNCTION(7, "DBG_MON_A15")
-+ ),
-+ MTK_PIN(
-+ 29, "GPIO29",
-+ MTK_EINT_FUNCTION(0, 29),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO29"),
-+ MTK_FUNCTION(1, "MSDC1_CLK"),
-+ MTK_FUNCTION(2, "IO_JTAG_TCK"),
-+ MTK_FUNCTION(3, "UDI_TCK"),
-+ MTK_FUNCTION(4, "CONN_DSP_JCK"),
-+ MTK_FUNCTION(5, "SSPM_JTAG_TCK"),
-+ MTK_FUNCTION(6, "CONN_MCU_AICE_TCKC"),
-+ MTK_FUNCTION(7, "DAP_MD32_SWCK")
-+ ),
-+ MTK_PIN(
-+ 30, "GPIO30",
-+ MTK_EINT_FUNCTION(0, 30),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO30"),
-+ MTK_FUNCTION(1, "MSDC1_CMD"),
-+ MTK_FUNCTION(2, "IO_JTAG_TMS"),
-+ MTK_FUNCTION(3, "UDI_TMS"),
-+ MTK_FUNCTION(4, "CONN_DSP_JMS"),
-+ MTK_FUNCTION(5, "SSPM_JTAG_TMS"),
-+ MTK_FUNCTION(6, "CONN_MCU_AICE_TMSC"),
-+ MTK_FUNCTION(7, "DAP_MD32_SWD")
-+ ),
-+ MTK_PIN(
-+ 31, "GPIO31",
-+ MTK_EINT_FUNCTION(0, 31),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO31"),
-+ MTK_FUNCTION(1, "MSDC1_DAT3")
-+ ),
-+ MTK_PIN(
-+ 32, "GPIO32",
-+ MTK_EINT_FUNCTION(0, 32),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO32"),
-+ MTK_FUNCTION(1, "MSDC1_DAT0"),
-+ MTK_FUNCTION(2, "IO_JTAG_TDI"),
-+ MTK_FUNCTION(3, "UDI_TDI"),
-+ MTK_FUNCTION(4, "CONN_DSP_JDI"),
-+ MTK_FUNCTION(5, "SSPM_JTAG_TDI")
-+ ),
-+ MTK_PIN(
-+ 33, "GPIO33",
-+ MTK_EINT_FUNCTION(0, 33),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO33"),
-+ MTK_FUNCTION(1, "MSDC1_DAT2"),
-+ MTK_FUNCTION(2, "IO_JTAG_TRSTN"),
-+ MTK_FUNCTION(3, "UDI_NTRST"),
-+ MTK_FUNCTION(4, "CONN_DSP_JINTP"),
-+ MTK_FUNCTION(5, "SSPM_JTAG_TRSTN")
-+ ),
-+ MTK_PIN(
-+ 34, "GPIO34",
-+ MTK_EINT_FUNCTION(0, 34),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO34"),
-+ MTK_FUNCTION(1, "MSDC1_DAT1"),
-+ MTK_FUNCTION(2, "IO_JTAG_TDO"),
-+ MTK_FUNCTION(3, "UDI_TDO"),
-+ MTK_FUNCTION(4, "CONN_DSP_JDO"),
-+ MTK_FUNCTION(5, "SSPM_JTAG_TDO")
-+ ),
-+ MTK_PIN(
-+ 35, "GPIO35",
-+ MTK_EINT_FUNCTION(0, 35),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO35"),
-+ MTK_FUNCTION(1, "MD1_SIM2_SIO"),
-+ MTK_FUNCTION(2, "CCU_JTAG_TDO"),
-+ MTK_FUNCTION(3, "MD1_SIM1_SIO"),
-+ MTK_FUNCTION(5, "SCP_JTAG_TDO"),
-+ MTK_FUNCTION(6, "CONN_DSP_JDO"),
-+ MTK_FUNCTION(7, "DBG_MON_A16")
-+ ),
-+ MTK_PIN(
-+ 36, "GPIO36",
-+ MTK_EINT_FUNCTION(0, 36),
-+ DRV_GRP0,
-+ MTK_FUNCTION(0, "GPIO36"),
-+ MTK_FUNCTION(1, "MD1_SIM2_SRST"),
-+ MTK_FUNCTION(2, "CCU_JTAG_TMS"),
-+ MTK_FUNCTION(3, "MD1_SIM1_SRST"),
-+ MTK_FUNCTION(4, "CONN_MCU_AICE_TMSC"),
-+ MTK_FUNCTION(5, "SCP_JTAG_TMS"),
-+ MTK_FUNCTION(6, "CONN_DSP_JMS"),
-+ MTK_FUNCTION(7, "DBG_MON_A17")
-+ ),
-+ MTK_PIN(
-+ 37, "GPIO37",
-+ MTK_EINT_FUNCTION(0, 37),
-+ DRV_GRP0,
-+ MTK_FUNCTION(0, "GPIO37"),
-+ MTK_FUNCTION(1, "MD1_SIM2_SCLK"),
-+ MTK_FUNCTION(2, "CCU_JTAG_TDI"),
-+ MTK_FUNCTION(3, "MD1_SIM1_SCLK"),
-+ MTK_FUNCTION(5, "SCP_JTAG_TDI"),
-+ MTK_FUNCTION(6, "CONN_DSP_JDI"),
-+ MTK_FUNCTION(7, "DBG_MON_A18")
-+ ),
-+ MTK_PIN(
-+ 38, "GPIO38",
-+ MTK_EINT_FUNCTION(0, 38),
-+ DRV_GRP0,
-+ MTK_FUNCTION(0, "GPIO38"),
-+ MTK_FUNCTION(1, "MD1_SIM1_SCLK"),
-+ MTK_FUNCTION(3, "MD1_SIM2_SCLK"),
-+ MTK_FUNCTION(7, "DBG_MON_A19")
-+ ),
-+ MTK_PIN(
-+ 39, "GPIO39",
-+ MTK_EINT_FUNCTION(0, 39),
-+ DRV_GRP0,
-+ MTK_FUNCTION(0, "GPIO39"),
-+ MTK_FUNCTION(1, "MD1_SIM1_SRST"),
-+ MTK_FUNCTION(2, "CCU_JTAG_TCK"),
-+ MTK_FUNCTION(3, "MD1_SIM2_SRST"),
-+ MTK_FUNCTION(4, "CONN_MCU_AICE_TCKC"),
-+ MTK_FUNCTION(5, "SCP_JTAG_TCK"),
-+ MTK_FUNCTION(6, "CONN_DSP_JCK"),
-+ MTK_FUNCTION(7, "DBG_MON_A20")
-+ ),
-+ MTK_PIN(
-+ 40, "GPIO40",
-+ MTK_EINT_FUNCTION(0, 40),
-+ DRV_GRP0,
-+ MTK_FUNCTION(0, "GPIO40"),
-+ MTK_FUNCTION(1, "MD1_SIM1_SIO"),
-+ MTK_FUNCTION(2, "CCU_JTAG_TRST"),
-+ MTK_FUNCTION(3, "MD1_SIM2_SIO"),
-+ MTK_FUNCTION(5, "SCP_JTAG_TRSTN"),
-+ MTK_FUNCTION(6, "CONN_DSP_JINTP"),
-+ MTK_FUNCTION(7, "DBG_MON_A21")
-+ ),
-+ MTK_PIN(
-+ 41, "GPIO41",
-+ MTK_EINT_FUNCTION(0, 41),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO41"),
-+ MTK_FUNCTION(1, "IDDIG"),
-+ MTK_FUNCTION(2, "URXD1"),
-+ MTK_FUNCTION(3, "UCTS0"),
-+ MTK_FUNCTION(4, "KPCOL2"),
-+ MTK_FUNCTION(5, "SSPM_UTXD_AO"),
-+ MTK_FUNCTION(6, "MD_INT0"),
-+ MTK_FUNCTION(7, "DBG_MON_A22")
-+ ),
-+ MTK_PIN(
-+ 42, "GPIO42",
-+ MTK_EINT_FUNCTION(0, 42),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO42"),
-+ MTK_FUNCTION(1, "USB_DRVVBUS"),
-+ MTK_FUNCTION(2, "UTXD1"),
-+ MTK_FUNCTION(3, "URTS0"),
-+ MTK_FUNCTION(4, "KPROW2"),
-+ MTK_FUNCTION(5, "SSPM_URXD_AO"),
-+ MTK_FUNCTION(6, "MD_INT1_C2K_UIM0_HOT_PLUG"),
-+ MTK_FUNCTION(7, "DBG_MON_A23")
-+ ),
-+ MTK_PIN(
-+ 43, "GPIO43",
-+ MTK_EINT_FUNCTION(0, 43),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO43"),
-+ MTK_FUNCTION(1, "DISP_PWM"),
-+ MTK_FUNCTION(7, "DBG_MON_A24")
-+ ),
-+ MTK_PIN(
-+ 44, "GPIO44",
-+ MTK_EINT_FUNCTION(0, 44),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO44"),
-+ MTK_FUNCTION(1, "DSI_TE"),
-+ MTK_FUNCTION(7, "DBG_MON_A25")
-+ ),
-+ MTK_PIN(
-+ 45, "GPIO45",
-+ MTK_EINT_FUNCTION(0, 45),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO45"),
-+ MTK_FUNCTION(1, "LCM_RST"),
-+ MTK_FUNCTION(7, "DBG_MON_A26")
-+ ),
-+ MTK_PIN(
-+ 46, "GPIO46",
-+ MTK_EINT_FUNCTION(0, 46),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO46"),
-+ MTK_FUNCTION(1, "MD_INT2_C2K_UIM1_HOT_PLUG"),
-+ MTK_FUNCTION(2, "UCTS0"),
-+ MTK_FUNCTION(3, "UCTS1"),
-+ MTK_FUNCTION(4, "IDDIG"),
-+ MTK_FUNCTION(5, "SCL_6306"),
-+ MTK_FUNCTION(6, "TP_UCTS1_AO"),
-+ MTK_FUNCTION(7, "DBG_MON_A27")
-+ ),
-+ MTK_PIN(
-+ 47, "GPIO47",
-+ MTK_EINT_FUNCTION(0, 47),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO47"),
-+ MTK_FUNCTION(1, "MD_INT1_C2K_UIM0_HOT_PLUG"),
-+ MTK_FUNCTION(2, "URTS0"),
-+ MTK_FUNCTION(3, "URTS1"),
-+ MTK_FUNCTION(4, "USB_DRVVBUS"),
-+ MTK_FUNCTION(5, "SDA_6306"),
-+ MTK_FUNCTION(6, "TP_URTS1_AO"),
-+ MTK_FUNCTION(7, "DBG_MON_A28")
-+ ),
-+ MTK_PIN(
-+ 48, "GPIO48",
-+ MTK_EINT_FUNCTION(0, 48),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO48"),
-+ MTK_FUNCTION(1, "SCL5"),
-+ MTK_FUNCTION(7, "DBG_MON_A29")
-+ ),
-+ MTK_PIN(
-+ 49, "GPIO49",
-+ MTK_EINT_FUNCTION(0, 49),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO49"),
-+ MTK_FUNCTION(1, "SDA5"),
-+ MTK_FUNCTION(7, "DBG_MON_A30")
-+ ),
-+ MTK_PIN(
-+ 50, "GPIO50",
-+ MTK_EINT_FUNCTION(0, 50),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO50"),
-+ MTK_FUNCTION(1, "SCL3"),
-+ MTK_FUNCTION(2, "URXD1"),
-+ MTK_FUNCTION(3, "MD_URXD1"),
-+ MTK_FUNCTION(4, "SSPM_URXD_AO"),
-+ MTK_FUNCTION(5, "IDDIG"),
-+ MTK_FUNCTION(6, "TP_URXD1_AO"),
-+ MTK_FUNCTION(7, "DBG_MON_A31")
-+ ),
-+ MTK_PIN(
-+ 51, "GPIO51",
-+ MTK_EINT_FUNCTION(0, 51),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO51"),
-+ MTK_FUNCTION(1, "SDA3"),
-+ MTK_FUNCTION(2, "UTXD1"),
-+ MTK_FUNCTION(3, "MD_UTXD1"),
-+ MTK_FUNCTION(4, "SSPM_UTXD_AO"),
-+ MTK_FUNCTION(5, "USB_DRVVBUS"),
-+ MTK_FUNCTION(6, "TP_UTXD1_AO"),
-+ MTK_FUNCTION(7, "DBG_MON_A32")
-+ ),
-+ MTK_PIN(
-+ 52, "GPIO52",
-+ MTK_EINT_FUNCTION(0, 52),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO52"),
-+ MTK_FUNCTION(1, "BPI_BUS15")
-+ ),
-+ MTK_PIN(
-+ 53, "GPIO53",
-+ MTK_EINT_FUNCTION(0, 53),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO53"),
-+ MTK_FUNCTION(1, "BPI_BUS13")
-+ ),
-+ MTK_PIN(
-+ 54, "GPIO54",
-+ MTK_EINT_FUNCTION(0, 54),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO54"),
-+ MTK_FUNCTION(1, "BPI_BUS12")
-+ ),
-+ MTK_PIN(
-+ 55, "GPIO55",
-+ MTK_EINT_FUNCTION(0, 55),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO55"),
-+ MTK_FUNCTION(1, "BPI_BUS8")
-+ ),
-+ MTK_PIN(
-+ 56, "GPIO56",
-+ MTK_EINT_FUNCTION(0, 56),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO56"),
-+ MTK_FUNCTION(1, "BPI_BUS9"),
-+ MTK_FUNCTION(2, "SCL_6306")
-+ ),
-+ MTK_PIN(
-+ 57, "GPIO57",
-+ MTK_EINT_FUNCTION(0, 57),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO57"),
-+ MTK_FUNCTION(1, "BPI_BUS10"),
-+ MTK_FUNCTION(2, "SDA_6306")
-+ ),
-+ MTK_PIN(
-+ 58, "GPIO58",
-+ MTK_EINT_FUNCTION(0, 58),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO58"),
-+ MTK_FUNCTION(1, "RFIC0_BSI_D2")
-+ ),
-+ MTK_PIN(
-+ 59, "GPIO59",
-+ MTK_EINT_FUNCTION(0, 59),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO59"),
-+ MTK_FUNCTION(1, "RFIC0_BSI_D1")
-+ ),
-+ MTK_PIN(
-+ 60, "GPIO60",
-+ MTK_EINT_FUNCTION(0, 60),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO60"),
-+ MTK_FUNCTION(1, "RFIC0_BSI_D0")
-+ ),
-+ MTK_PIN(
-+ 61, "GPIO61",
-+ MTK_EINT_FUNCTION(0, 61),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO61"),
-+ MTK_FUNCTION(1, "MIPI1_SDATA")
-+ ),
-+ MTK_PIN(
-+ 62, "GPIO62",
-+ MTK_EINT_FUNCTION(0, 62),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO62"),
-+ MTK_FUNCTION(1, "MIPI1_SCLK")
-+ ),
-+ MTK_PIN(
-+ 63, "GPIO63",
-+ MTK_EINT_FUNCTION(0, 63),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO63"),
-+ MTK_FUNCTION(1, "MIPI0_SDATA")
-+ ),
-+ MTK_PIN(
-+ 64, "GPIO64",
-+ MTK_EINT_FUNCTION(0, 64),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO64"),
-+ MTK_FUNCTION(1, "MIPI0_SCLK")
-+ ),
-+ MTK_PIN(
-+ 65, "GPIO65",
-+ MTK_EINT_FUNCTION(0, 65),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO65"),
-+ MTK_FUNCTION(1, "MIPI3_SDATA"),
-+ MTK_FUNCTION(2, "BPI_BUS16")
-+ ),
-+ MTK_PIN(
-+ 66, "GPIO66",
-+ MTK_EINT_FUNCTION(0, 66),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO66"),
-+ MTK_FUNCTION(1, "MIPI3_SCLK"),
-+ MTK_FUNCTION(2, "BPI_BUS17")
-+ ),
-+ MTK_PIN(
-+ 67, "GPIO67",
-+ MTK_EINT_FUNCTION(0, 67),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO67"),
-+ MTK_FUNCTION(1, "MIPI2_SDATA")
-+ ),
-+ MTK_PIN(
-+ 68, "GPIO68",
-+ MTK_EINT_FUNCTION(0, 68),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO68"),
-+ MTK_FUNCTION(1, "MIPI2_SCLK")
-+ ),
-+ MTK_PIN(
-+ 69, "GPIO69",
-+ MTK_EINT_FUNCTION(0, 69),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO69"),
-+ MTK_FUNCTION(1, "BPI_BUS7")
-+ ),
-+ MTK_PIN(
-+ 70, "GPIO70",
-+ MTK_EINT_FUNCTION(0, 70),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO70"),
-+ MTK_FUNCTION(1, "BPI_BUS6")
-+ ),
-+ MTK_PIN(
-+ 71, "GPIO71",
-+ MTK_EINT_FUNCTION(0, 71),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO71"),
-+ MTK_FUNCTION(1, "BPI_BUS5")
-+ ),
-+ MTK_PIN(
-+ 72, "GPIO72",
-+ MTK_EINT_FUNCTION(0, 72),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO72"),
-+ MTK_FUNCTION(1, "BPI_BUS4")
-+ ),
-+ MTK_PIN(
-+ 73, "GPIO73",
-+ MTK_EINT_FUNCTION(0, 73),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO73"),
-+ MTK_FUNCTION(1, "BPI_BUS3")
-+ ),
-+ MTK_PIN(
-+ 74, "GPIO74",
-+ MTK_EINT_FUNCTION(0, 74),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO74"),
-+ MTK_FUNCTION(1, "BPI_BUS2")
-+ ),
-+ MTK_PIN(
-+ 75, "GPIO75",
-+ MTK_EINT_FUNCTION(0, 75),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO75"),
-+ MTK_FUNCTION(1, "BPI_BUS1")
-+ ),
-+ MTK_PIN(
-+ 76, "GPIO76",
-+ MTK_EINT_FUNCTION(0, 76),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO76"),
-+ MTK_FUNCTION(1, "BPI_BUS0")
-+ ),
-+ MTK_PIN(
-+ 77, "GPIO77",
-+ MTK_EINT_FUNCTION(0, 77),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO77"),
-+ MTK_FUNCTION(1, "BPI_BUS14")
-+ ),
-+ MTK_PIN(
-+ 78, "GPIO78",
-+ MTK_EINT_FUNCTION(0, 78),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO78"),
-+ MTK_FUNCTION(1, "BPI_BUS11")
-+ ),
-+ MTK_PIN(
-+ 79, "GPIO79",
-+ MTK_EINT_FUNCTION(0, 79),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO79"),
-+ MTK_FUNCTION(1, "BPI_PA_VM1"),
-+ MTK_FUNCTION(2, "MIPI4_SDATA")
-+ ),
-+ MTK_PIN(
-+ 80, "GPIO80",
-+ MTK_EINT_FUNCTION(0, 80),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO80"),
-+ MTK_FUNCTION(1, "BPI_PA_VM0"),
-+ MTK_FUNCTION(2, "MIPI4_SCLK")
-+ ),
-+ MTK_PIN(
-+ 81, "GPIO81",
-+ MTK_EINT_FUNCTION(0, 81),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO81"),
-+ MTK_FUNCTION(1, "SDA1"),
-+ MTK_FUNCTION(7, "DBG_MON_B0")
-+ ),
-+ MTK_PIN(
-+ 82, "GPIO82",
-+ MTK_EINT_FUNCTION(0, 82),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO82"),
-+ MTK_FUNCTION(1, "SDA0"),
-+ MTK_FUNCTION(7, "DBG_MON_B1")
-+ ),
-+ MTK_PIN(
-+ 83, "GPIO83",
-+ MTK_EINT_FUNCTION(0, 83),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO83"),
-+ MTK_FUNCTION(1, "SCL0"),
-+ MTK_FUNCTION(7, "DBG_MON_B2")
-+ ),
-+ MTK_PIN(
-+ 84, "GPIO84",
-+ MTK_EINT_FUNCTION(0, 84),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO84"),
-+ MTK_FUNCTION(1, "SCL1"),
-+ MTK_FUNCTION(7, "DBG_MON_B3")
-+ ),
-+ MTK_PIN(
-+ 85, "GPIO85",
-+ MTK_EINT_FUNCTION(0, 85),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO85"),
-+ MTK_FUNCTION(1, "RFIC0_BSI_EN")
-+ ),
-+ MTK_PIN(
-+ 86, "GPIO86",
-+ MTK_EINT_FUNCTION(0, 86),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO86"),
-+ MTK_FUNCTION(1, "RFIC0_BSI_CK")
-+ ),
-+ MTK_PIN(
-+ 87, "GPIO87",
-+ MTK_EINT_FUNCTION(0, 87),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO87"),
-+ MTK_FUNCTION(2, "MD_INT1_C2K_UIM0_HOT_PLUG"),
-+ MTK_FUNCTION(3, "CMVREF0"),
-+ MTK_FUNCTION(4, "MD_URXD0"),
-+ MTK_FUNCTION(5, "AGPS_SYNC"),
-+ MTK_FUNCTION(6, "EXT_FRAME_SYNC")
-+ ),
-+ MTK_PIN(
-+ 88, "GPIO88",
-+ MTK_EINT_FUNCTION(0, 88),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO88"),
-+ MTK_FUNCTION(1, "CMMCLK3"),
-+ MTK_FUNCTION(2, "MD_INT2_C2K_UIM1_HOT_PLUG"),
-+ MTK_FUNCTION(3, "CMVREF1"),
-+ MTK_FUNCTION(4, "MD_UTXD0"),
-+ MTK_FUNCTION(5, "AGPS_SYNC"),
-+ MTK_FUNCTION(6, "DVFSRC_EXT_REQ")
-+ ),
-+ MTK_PIN(
-+ 89, "GPIO89",
-+ MTK_EINT_FUNCTION(0, 89),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO89"),
-+ MTK_FUNCTION(1, "SRCLKENAI0"),
-+ MTK_FUNCTION(2, "PWM2"),
-+ MTK_FUNCTION(3, "MD_INT0"),
-+ MTK_FUNCTION(4, "USB_DRVVBUS"),
-+ MTK_FUNCTION(5, "SCL_6306"),
-+ MTK_FUNCTION(6, "TP_GPIO4_AO"),
-+ MTK_FUNCTION(7, "DBG_MON_B21")
-+ ),
-+ MTK_PIN(
-+ 90, "GPIO90",
-+ MTK_EINT_FUNCTION(0, 90),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO90"),
-+ MTK_FUNCTION(1, "URXD1"),
-+ MTK_FUNCTION(2, "PWM0"),
-+ MTK_FUNCTION(3, "MD_INT2_C2K_UIM1_HOT_PLUG"),
-+ MTK_FUNCTION(4, "ANT_SEL4"),
-+ MTK_FUNCTION(5, "USB_DRVVBUS"),
-+ MTK_FUNCTION(6, "I2S2_BCK"),
-+ MTK_FUNCTION(7, "DBG_MON_B4")
-+ ),
-+ MTK_PIN(
-+ 91, "GPIO91",
-+ MTK_EINT_FUNCTION(0, 91),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO91"),
-+ MTK_FUNCTION(1, "KPROW1"),
-+ MTK_FUNCTION(2, "PWM2"),
-+ MTK_FUNCTION(3, "MD_INT0"),
-+ MTK_FUNCTION(4, "ANT_SEL5"),
-+ MTK_FUNCTION(5, "IDDIG"),
-+ MTK_FUNCTION(6, "I2S2_LRCK"),
-+ MTK_FUNCTION(7, "DBG_MON_B5")
-+ ),
-+ MTK_PIN(
-+ 92, "GPIO92",
-+ MTK_EINT_FUNCTION(0, 92),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO92"),
-+ MTK_FUNCTION(1, "KPROW0"),
-+ MTK_FUNCTION(5, "DVFSRC_EXT_REQ"),
-+ MTK_FUNCTION(6, "I2S2_DI"),
-+ MTK_FUNCTION(7, "DBG_MON_B6")
-+ ),
-+ MTK_PIN(
-+ 93, "GPIO93",
-+ MTK_EINT_FUNCTION(0, 93),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO93"),
-+ MTK_FUNCTION(1, "KPCOL0"),
-+ MTK_FUNCTION(7, "DBG_MON_B7")
-+ ),
-+ MTK_PIN(
-+ 94, "GPIO94",
-+ MTK_EINT_FUNCTION(0, 94),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO94"),
-+ MTK_FUNCTION(1, "KPCOL1"),
-+ MTK_FUNCTION(5, "CMFLASH"),
-+ MTK_FUNCTION(6, "CMVREF0"),
-+ MTK_FUNCTION(7, "DBG_MON_B8")
-+ ),
-+ MTK_PIN(
-+ 95, "GPIO95",
-+ MTK_EINT_FUNCTION(0, 95),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO95"),
-+ MTK_FUNCTION(1, "URXD0"),
-+ MTK_FUNCTION(2, "UTXD0"),
-+ MTK_FUNCTION(3, "MD_URXD0"),
-+ MTK_FUNCTION(4, "PTA_RXD"),
-+ MTK_FUNCTION(5, "SSPM_URXD_AO"),
-+ MTK_FUNCTION(6, "WIFI_RXD")
-+ ),
-+ MTK_PIN(
-+ 96, "GPIO96",
-+ MTK_EINT_FUNCTION(0, 96),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO96"),
-+ MTK_FUNCTION(1, "UTXD0"),
-+ MTK_FUNCTION(2, "URXD0"),
-+ MTK_FUNCTION(3, "MD_UTXD0"),
-+ MTK_FUNCTION(4, "PTA_TXD"),
-+ MTK_FUNCTION(5, "SSPM_UTXD_AO"),
-+ MTK_FUNCTION(6, "WIFI_TXD")
-+ ),
-+ MTK_PIN(
-+ 97, "GPIO97",
-+ MTK_EINT_FUNCTION(0, 97),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO97"),
-+ MTK_FUNCTION(1, "UCTS0"),
-+ MTK_FUNCTION(2, "I2S1_MCK"),
-+ MTK_FUNCTION(3, "CONN_MCU_TDO"),
-+ MTK_FUNCTION(4, "SPI5_MI"),
-+ MTK_FUNCTION(5, "SCL_6306"),
-+ MTK_FUNCTION(6, "MCUPM_JTAG_TDO"),
-+ MTK_FUNCTION(7, "DBG_MON_B15")
-+ ),
-+ MTK_PIN(
-+ 98, "GPIO98",
-+ MTK_EINT_FUNCTION(0, 98),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO98"),
-+ MTK_FUNCTION(1, "URTS0"),
-+ MTK_FUNCTION(2, "I2S1_BCK"),
-+ MTK_FUNCTION(3, "CONN_MCU_TMS"),
-+ MTK_FUNCTION(4, "SPI5_CSB"),
-+ MTK_FUNCTION(6, "MCUPM_JTAG_TMS"),
-+ MTK_FUNCTION(7, "DBG_MON_B16")
-+ ),
-+ MTK_PIN(
-+ 99, "GPIO99",
-+ MTK_EINT_FUNCTION(0, 99),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO99"),
-+ MTK_FUNCTION(1, "CMMCLK0"),
-+ MTK_FUNCTION(4, "AUXIF_CLK"),
-+ MTK_FUNCTION(5, "PTA_RXD"),
-+ MTK_FUNCTION(6, "CONN_UART0_RXD"),
-+ MTK_FUNCTION(7, "DBG_MON_B17")
-+ ),
-+
-+ MTK_PIN(
-+ 100, "GPIO100",
-+ MTK_EINT_FUNCTION(0, 100),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO100"),
-+ MTK_FUNCTION(1, "CMMCLK1"),
-+ MTK_FUNCTION(4, "AUXIF_ST"),
-+ MTK_FUNCTION(5, "PTA_TXD"),
-+ MTK_FUNCTION(6, "CONN_UART0_TXD"),
-+ MTK_FUNCTION(7, "DBG_MON_B18")
-+ ),
-+ MTK_PIN(
-+ 101, "GPIO101",
-+ MTK_EINT_FUNCTION(0, 101),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO101"),
-+ MTK_FUNCTION(1, "CMFLASH"),
-+ MTK_FUNCTION(2, "I2S1_LRCK"),
-+ MTK_FUNCTION(3, "CONN_MCU_TCK"),
-+ MTK_FUNCTION(4, "SPI5_MO"),
-+ MTK_FUNCTION(6, "MCUPM_JTAG_TCK"),
-+ MTK_FUNCTION(7, "DBG_MON_B19")
-+ ),
-+ MTK_PIN(
-+ 102, "GPIO102",
-+ MTK_EINT_FUNCTION(0, 102),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO102"),
-+ MTK_FUNCTION(1, "CMVREF0"),
-+ MTK_FUNCTION(2, "I2S1_DO"),
-+ MTK_FUNCTION(3, "CONN_MCU_TDI"),
-+ MTK_FUNCTION(4, "SPI5_CLK"),
-+ MTK_FUNCTION(5, "AGPS_SYNC"),
-+ MTK_FUNCTION(6, "MCUPM_JTAG_TDI"),
-+ MTK_FUNCTION(7, "DBG_MON_B20")
-+ ),
-+ MTK_PIN(
-+ 103, "GPIO103",
-+ MTK_EINT_FUNCTION(0, 103),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO103"),
-+ MTK_FUNCTION(1, "SCL2"),
-+ MTK_FUNCTION(2, "TP_UTXD1_AO"),
-+ MTK_FUNCTION(3, "MD_UTXD0"),
-+ MTK_FUNCTION(4, "MD_UTXD1"),
-+ MTK_FUNCTION(5, "TP_URTS2_AO"),
-+ MTK_FUNCTION(6, "WIFI_TXD"),
-+ MTK_FUNCTION(7, "DBG_MON_B25")
-+ ),
-+ MTK_PIN(
-+ 104, "GPIO104",
-+ MTK_EINT_FUNCTION(0, 104),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO104"),
-+ MTK_FUNCTION(1, "SDA2"),
-+ MTK_FUNCTION(2, "TP_URXD1_AO"),
-+ MTK_FUNCTION(3, "MD_URXD0"),
-+ MTK_FUNCTION(4, "MD_URXD1"),
-+ MTK_FUNCTION(5, "TP_UCTS2_AO"),
-+ MTK_FUNCTION(6, "WIFI_RXD"),
-+ MTK_FUNCTION(7, "DBG_MON_B26")
-+ ),
-+ MTK_PIN(
-+ 105, "GPIO105",
-+ MTK_EINT_FUNCTION(0, 105),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO105"),
-+ MTK_FUNCTION(1, "SCL4"),
-+ MTK_FUNCTION(3, "MD_UTXD1"),
-+ MTK_FUNCTION(4, "MD_UTXD0"),
-+ MTK_FUNCTION(5, "TP_UTXD2_AO"),
-+ MTK_FUNCTION(6, "PTA_TXD"),
-+ MTK_FUNCTION(7, "DBG_MON_B27")
-+ ),
-+ MTK_PIN(
-+ 106, "GPIO106",
-+ MTK_EINT_FUNCTION(0, 106),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO106"),
-+ MTK_FUNCTION(1, "SDA4"),
-+ MTK_FUNCTION(3, "MD_URXD1"),
-+ MTK_FUNCTION(4, "MD_URXD0"),
-+ MTK_FUNCTION(5, "TP_URXD2_AO"),
-+ MTK_FUNCTION(6, "PTA_RXD"),
-+ MTK_FUNCTION(7, "DBG_MON_B28")
-+ ),
-+ MTK_PIN(
-+ 107, "GPIO107",
-+ MTK_EINT_FUNCTION(0, 107),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO107"),
-+ MTK_FUNCTION(1, "UTXD1"),
-+ MTK_FUNCTION(2, "MD_UTXD0"),
-+ MTK_FUNCTION(3, "SDA_6306"),
-+ MTK_FUNCTION(4, "KPCOL3"),
-+ MTK_FUNCTION(5, "CMVREF0"),
-+ MTK_FUNCTION(6, "URTS0"),
-+ MTK_FUNCTION(7, "DBG_MON_B29")
-+ ),
-+ MTK_PIN(
-+ 108, "GPIO108",
-+ MTK_EINT_FUNCTION(0, 108),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO108"),
-+ MTK_FUNCTION(1, "CMMCLK2"),
-+ MTK_FUNCTION(2, "MD_INT0"),
-+ MTK_FUNCTION(3, "CONN_MCU_DBGACK_N"),
-+ MTK_FUNCTION(4, "KPCOL4"),
-+ MTK_FUNCTION(6, "I2S3_MCK"),
-+ MTK_FUNCTION(7, "DBG_MON_B30")
-+ ),
-+ MTK_PIN(
-+ 109, "GPIO109",
-+ MTK_EINT_FUNCTION(0, 109),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO109"),
-+ MTK_FUNCTION(1, "URXD1"),
-+ MTK_FUNCTION(2, "MD_URXD0"),
-+ MTK_FUNCTION(3, "ANT_SEL7"),
-+ MTK_FUNCTION(4, "KPCOL5"),
-+ MTK_FUNCTION(5, "CMVREF1"),
-+ MTK_FUNCTION(6, "UCTS0"),
-+ MTK_FUNCTION(7, "DBG_MON_B31")
-+ ),
-+ MTK_PIN(
-+ 110, "GPIO110",
-+ MTK_EINT_FUNCTION(0, 110),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO110"),
-+ MTK_FUNCTION(1, "ANT_SEL0"),
-+ MTK_FUNCTION(2, "CLKM0"),
-+ MTK_FUNCTION(3, "PWM3"),
-+ MTK_FUNCTION(4, "MD_INT0"),
-+ MTK_FUNCTION(5, "IDDIG"),
-+ MTK_FUNCTION(6, "I2S3_BCK"),
-+ MTK_FUNCTION(7, "DBG_MON_B13")
-+ ),
-+ MTK_PIN(
-+ 111, "GPIO111",
-+ MTK_EINT_FUNCTION(0, 111),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO111"),
-+ MTK_FUNCTION(1, "ANT_SEL1"),
-+ MTK_FUNCTION(2, "CLKM1"),
-+ MTK_FUNCTION(3, "PWM4"),
-+ MTK_FUNCTION(4, "PTA_RXD"),
-+ MTK_FUNCTION(5, "CMVREF0"),
-+ MTK_FUNCTION(6, "I2S3_LRCK"),
-+ MTK_FUNCTION(7, "DBG_MON_B14")
-+ ),
-+ MTK_PIN(
-+ 112, "GPIO112",
-+ MTK_EINT_FUNCTION(0, 112),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO112"),
-+ MTK_FUNCTION(1, "ANT_SEL2"),
-+ MTK_FUNCTION(2, "CLKM2"),
-+ MTK_FUNCTION(3, "PWM5"),
-+ MTK_FUNCTION(4, "PTA_TXD"),
-+ MTK_FUNCTION(5, "CMVREF1"),
-+ MTK_FUNCTION(6, "I2S3_DO")
-+ ),
-+ MTK_PIN(
-+ 113, "GPIO113",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO113"),
-+ MTK_FUNCTION(1, "CONN_TOP_CLK")
-+ ),
-+ MTK_PIN(
-+ 114, "GPIO114",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO114"),
-+ MTK_FUNCTION(1, "CONN_TOP_DATA")
-+ ),
-+ MTK_PIN(
-+ 115, "GPIO115",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO115"),
-+ MTK_FUNCTION(1, "CONN_BT_CLK")
-+ ),
-+ MTK_PIN(
-+ 116, "GPIO116",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO116"),
-+ MTK_FUNCTION(1, "CONN_BT_DATA")
-+ ),
-+ MTK_PIN(
-+ 117, "GPIO117",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO117"),
-+ MTK_FUNCTION(1, "CONN_WF_CTRL0")
-+ ),
-+ MTK_PIN(
-+ 118, "GPIO118",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO118"),
-+ MTK_FUNCTION(1, "CONN_WF_CTRL1")
-+ ),
-+ MTK_PIN(
-+ 119, "GPIO119",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO119"),
-+ MTK_FUNCTION(1, "CONN_WF_CTRL2")
-+ ),
-+ MTK_PIN(
-+ 120, "GPIO120",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO120"),
-+ MTK_FUNCTION(1, "CONN_WB_PTA")
-+ ),
-+ MTK_PIN(
-+ 121, "GPIO121",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO121"),
-+ MTK_FUNCTION(1, "CONN_HRST_B")
-+ ),
-+ MTK_PIN(
-+ 122, "GPIO122",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO122"),
-+ MTK_FUNCTION(1, "MSDC0_CMD"),
-+ MTK_FUNCTION(2, "MSDC0_CMD")
-+ ),
-+ MTK_PIN(
-+ 123, "GPIO123",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO123"),
-+ MTK_FUNCTION(1, "MSDC0_DAT0"),
-+ MTK_FUNCTION(2, "MSDC0_DAT4")
-+ ),
-+ MTK_PIN(
-+ 124, "GPIO124",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO124"),
-+ MTK_FUNCTION(1, "MSDC0_CLK"),
-+ MTK_FUNCTION(2, "MSDC0_CLK")
-+ ),
-+ MTK_PIN(
-+ 125, "GPIO125",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO125"),
-+ MTK_FUNCTION(1, "MSDC0_DAT2"),
-+ MTK_FUNCTION(2, "MSDC0_DAT5")
-+ ),
-+ MTK_PIN(
-+ 126, "GPIO126",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO126"),
-+ MTK_FUNCTION(1, "MSDC0_DAT4"),
-+ MTK_FUNCTION(2, "MSDC0_DAT2")
-+ ),
-+ MTK_PIN(
-+ 127, "GPIO127",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO127"),
-+ MTK_FUNCTION(1, "MSDC0_DAT6"),
-+ MTK_FUNCTION(2, "MSDC0_DAT1")
-+ ),
-+ MTK_PIN(
-+ 128, "GPIO128",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO128"),
-+ MTK_FUNCTION(1, "MSDC0_DAT1"),
-+ MTK_FUNCTION(2, "MSDC0_DAT6")
-+ ),
-+ MTK_PIN(
-+ 129, "GPIO129",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO129"),
-+ MTK_FUNCTION(1, "MSDC0_DAT5"),
-+ MTK_FUNCTION(2, "MSDC0_DAT0")
-+ ),
-+ MTK_PIN(
-+ 130, "GPIO130",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO130"),
-+ MTK_FUNCTION(1, "MSDC0_DAT7"),
-+ MTK_FUNCTION(2, "MSDC0_DAT7")
-+ ),
-+ MTK_PIN(
-+ 131, "GPIO131",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO131"),
-+ MTK_FUNCTION(1, "MSDC0_DSL"),
-+ MTK_FUNCTION(2, "MSDC0_DSL")
-+ ),
-+ MTK_PIN(
-+ 132, "GPIO132",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO132"),
-+ MTK_FUNCTION(1, "MSDC0_DAT3"),
-+ MTK_FUNCTION(2, "MSDC0_DAT3")
-+ ),
-+ MTK_PIN(
-+ 133, "GPIO133",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO133"),
-+ MTK_FUNCTION(1, "MSDC0_RSTB"),
-+ MTK_FUNCTION(2, "MSDC0_RSTB")
-+ ),
-+ MTK_PIN(
-+ 134, "GPIO134",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO134"),
-+ MTK_FUNCTION(1, "RTC32K_CK")
-+ ),
-+ MTK_PIN(
-+ 135, "GPIO135",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO135"),
-+ MTK_FUNCTION(1, "WATCHDOG")
-+ ),
-+ MTK_PIN(
-+ 136, "GPIO136",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO136"),
-+ MTK_FUNCTION(1, "AUD_CLK_MOSI"),
-+ MTK_FUNCTION(2, "AUD_CLK_MISO"),
-+ MTK_FUNCTION(3, "I2S1_MCK")
-+ ),
-+ MTK_PIN(
-+ 137, "GPIO137",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO137"),
-+ MTK_FUNCTION(1, "AUD_SYNC_MOSI"),
-+ MTK_FUNCTION(2, "AUD_SYNC_MISO"),
-+ MTK_FUNCTION(3, "I2S1_BCK")
-+ ),
-+ MTK_PIN(
-+ 138, "GPIO138",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO138"),
-+ MTK_FUNCTION(1, "AUD_DAT_MOSI0"),
-+ MTK_FUNCTION(2, "AUD_DAT_MISO0"),
-+ MTK_FUNCTION(3, "I2S1_LRCK")
-+ ),
-+ MTK_PIN(
-+ 139, "GPIO139",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO139"),
-+ MTK_FUNCTION(1, "AUD_DAT_MOSI1"),
-+ MTK_FUNCTION(2, "AUD_DAT_MISO1"),
-+ MTK_FUNCTION(3, "I2S1_DO")
-+ ),
-+ MTK_PIN(
-+ 140, "GPIO140",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO140"),
-+ MTK_FUNCTION(1, "AUD_CLK_MISO"),
-+ MTK_FUNCTION(2, "AUD_CLK_MOSI"),
-+ MTK_FUNCTION(3, "I2S2_MCK")
-+ ),
-+ MTK_PIN(
-+ 141, "GPIO141",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO141"),
-+ MTK_FUNCTION(1, "AUD_SYNC_MISO"),
-+ MTK_FUNCTION(2, "AUD_SYNC_MOSI"),
-+ MTK_FUNCTION(3, "I2S2_BCK")
-+ ),
-+ MTK_PIN(
-+ 142, "GPIO142",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO142"),
-+ MTK_FUNCTION(1, "AUD_DAT_MISO0"),
-+ MTK_FUNCTION(2, "AUD_DAT_MOSI0"),
-+ MTK_FUNCTION(3, "I2S2_LRCK")
-+ ),
-+ MTK_PIN(
-+ 143, "GPIO143",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO143"),
-+ MTK_FUNCTION(1, "AUD_DAT_MISO1"),
-+ MTK_FUNCTION(2, "AUD_DAT_MOSI1"),
-+ MTK_FUNCTION(3, "I2S2_DI")
-+ ),
-+ MTK_PIN(
-+ 144, "GPIO144",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO144"),
-+ MTK_FUNCTION(1, "PWRAP_SPI0_MI"),
-+ MTK_FUNCTION(2, "PWRAP_SPI0_MO")
-+ ),
-+ MTK_PIN(
-+ 145, "GPIO145",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO145"),
-+ MTK_FUNCTION(1, "PWRAP_SPI0_CSN")
-+ ),
-+ MTK_PIN(
-+ 146, "GPIO146",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO146"),
-+ MTK_FUNCTION(1, "PWRAP_SPI0_MO"),
-+ MTK_FUNCTION(2, "PWRAP_SPI0_MI")
-+ ),
-+ MTK_PIN(
-+ 147, "GPIO147",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO147"),
-+ MTK_FUNCTION(1, "PWRAP_SPI0_CK")
-+ ),
-+ MTK_PIN(
-+ 148, "GPIO148",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO148"),
-+ MTK_FUNCTION(1, "SRCLKENA0")
-+ ),
-+ MTK_PIN(
-+ 149, "GPIO149",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO149"),
-+ MTK_FUNCTION(1, "SRCLKENA1")
-+ ),
-+ MTK_PIN(
-+ 150, "GPIO150",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO150"),
-+ MTK_FUNCTION(1, "PWM0"),
-+ MTK_FUNCTION(2, "CMFLASH"),
-+ MTK_FUNCTION(3, "ANT_SEL3"),
-+ MTK_FUNCTION(5, "MD_URXD0"),
-+ MTK_FUNCTION(6, "TP_URXD2_AO")
-+ ),
-+ MTK_PIN(
-+ 151, "GPIO151",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO151"),
-+ MTK_FUNCTION(1, "PWM1"),
-+ MTK_FUNCTION(2, "CMVREF0"),
-+ MTK_FUNCTION(3, "ANT_SEL4"),
-+ MTK_FUNCTION(5, "MD_UTXD0"),
-+ MTK_FUNCTION(6, "TP_UTXD2_AO")
-+ ),
-+ MTK_PIN(
-+ 152, "GPIO152",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO152"),
-+ MTK_FUNCTION(1, "PWM2"),
-+ MTK_FUNCTION(2, "CMVREF1"),
-+ MTK_FUNCTION(3, "ANT_SEL5"),
-+ MTK_FUNCTION(5, "MD_URXD1"),
-+ MTK_FUNCTION(6, "TP_UCTS1_AO")
-+ ),
-+ MTK_PIN(
-+ 153, "GPIO153",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO153"),
-+ MTK_FUNCTION(1, "PWM3"),
-+ MTK_FUNCTION(2, "CLKM0"),
-+ MTK_FUNCTION(3, "ANT_SEL6"),
-+ MTK_FUNCTION(5, "MD_UTXD1"),
-+ MTK_FUNCTION(6, "TP_URTS1_AO")
-+ ),
-+ MTK_PIN(
-+ 154, "GPIO154",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO154"),
-+ MTK_FUNCTION(1, "PWM5"),
-+ MTK_FUNCTION(2, "CLKM2"),
-+ MTK_FUNCTION(3, "USB_DRVVBUS"),
-+ MTK_FUNCTION(5, "PTA_TXD"),
-+ MTK_FUNCTION(6, "CONN_UART0_TXD")
-+ ),
-+ MTK_PIN(
-+ 155, "GPIO155",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO155"),
-+ MTK_FUNCTION(1, "SPI0_MI"),
-+ MTK_FUNCTION(2, "IDDIG"),
-+ MTK_FUNCTION(3, "AGPS_SYNC"),
-+ MTK_FUNCTION(4, "TP_GPIO0_AO"),
-+ MTK_FUNCTION(5, "MFG_JTAG_TDO"),
-+ MTK_FUNCTION(6, "DFD_TDO"),
-+ MTK_FUNCTION(7, "JTDO_SEL1")
-+ ),
-+ MTK_PIN(
-+ 156, "GPIO156",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO156"),
-+ MTK_FUNCTION(1, "SPI0_CSB"),
-+ MTK_FUNCTION(2, "USB_DRVVBUS"),
-+ MTK_FUNCTION(3, "DVFSRC_EXT_REQ"),
-+ MTK_FUNCTION(4, "TP_GPIO1_AO"),
-+ MTK_FUNCTION(5, "MFG_JTAG_TMS"),
-+ MTK_FUNCTION(6, "DFD_TMS"),
-+ MTK_FUNCTION(7, "JTMS_SEL1")
-+ ),
-+ MTK_PIN(
-+ 157, "GPIO157",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO157"),
-+ MTK_FUNCTION(1, "SPI0_MO"),
-+ MTK_FUNCTION(2, "MD_INT1_C2K_UIM0_HOT_PLUG"),
-+ MTK_FUNCTION(3, "CLKM0"),
-+ MTK_FUNCTION(4, "TP_GPIO2_AO"),
-+ MTK_FUNCTION(5, "MFG_JTAG_TDI"),
-+ MTK_FUNCTION(6, "DFD_TDI"),
-+ MTK_FUNCTION(7, "JTDI_SEL1")
-+ ),
-+ MTK_PIN(
-+ 158, "GPIO158",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO158"),
-+ MTK_FUNCTION(1, "SPI0_CLK"),
-+ MTK_FUNCTION(2, "MD_INT2_C2K_UIM1_HOT_PLUG"),
-+ MTK_FUNCTION(3, "EXT_FRAME_SYNC"),
-+ MTK_FUNCTION(4, "TP_GPIO3_AO"),
-+ MTK_FUNCTION(5, "MFG_JTAG_TCK"),
-+ MTK_FUNCTION(6, "DFD_TCK_XI"),
-+ MTK_FUNCTION(7, "JTCK_SEL1")
-+ ),
-+ MTK_PIN(
-+ 159, "GPIO159",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO159"),
-+ MTK_FUNCTION(1, "PWM4"),
-+ MTK_FUNCTION(2, "CLKM1"),
-+ MTK_FUNCTION(3, "ANT_SEL7"),
-+ MTK_FUNCTION(5, "PTA_RXD"),
-+ MTK_FUNCTION(6, "CONN_UART0_RXD")
-+ ),
-+ MTK_PIN(
-+ 160, "GPIO160",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO160"),
-+ MTK_FUNCTION(1, "CLKM0"),
-+ MTK_FUNCTION(2, "PWM2"),
-+ MTK_FUNCTION(3, "EXT_FRAME_SYNC"),
-+ MTK_FUNCTION(4, "TP_GPIO5_AO"),
-+ MTK_FUNCTION(5, "AGPS_SYNC"),
-+ MTK_FUNCTION(6, "DVFSRC_EXT_REQ")
-+ ),
-+ MTK_PIN(
-+ 161, "GPIO161",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO161"),
-+ MTK_FUNCTION(1, "SCL6"),
-+ MTK_FUNCTION(2, "SCL_6306"),
-+ MTK_FUNCTION(3, "TP_GPIO6_AO"),
-+ MTK_FUNCTION(4, "KPCOL6"),
-+ MTK_FUNCTION(5, "PTA_RXD"),
-+ MTK_FUNCTION(6, "CONN_UART0_RXD")
-+ ),
-+ MTK_PIN(
-+ 162, "GPIO162",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO162"),
-+ MTK_FUNCTION(1, "SDA6"),
-+ MTK_FUNCTION(2, "SDA_6306"),
-+ MTK_FUNCTION(3, "TP_GPIO7_AO"),
-+ MTK_FUNCTION(4, "KPCOL7"),
-+ MTK_FUNCTION(5, "PTA_TXD"),
-+ MTK_FUNCTION(6, "CONN_UART0_TXD")
-+ ),
-+ MTK_PIN(
-+ 163, "GPIO163",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO163")
-+ ),
-+ MTK_PIN(
-+ 164, "GPIO164",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO164")
-+ ),
-+ MTK_PIN(
-+ 165, "GPIO165",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO165")
-+ ),
-+ MTK_PIN(
-+ 166, "GPIO166",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO166")
-+ ),
-+ MTK_PIN(
-+ 167, "GPIO167",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO167")
-+ ),
-+ MTK_PIN(
-+ 168, "GPIO168",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO168")
-+ ),
-+ MTK_PIN(
-+ 169, "GPIO169",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO169")
-+ ),
-+ MTK_PIN(
-+ 170, "GPIO170",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO170")
-+ ),
-+ MTK_PIN(
-+ 171, "GPIO171",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO171")
-+ ),
-+ MTK_PIN(
-+ 172, "GPIO172",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO172")
-+ ),
-+ MTK_PIN(
-+ 173, "GPIO173",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO173")
-+ ),
-+ MTK_PIN(
-+ 174, "GPIO174",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO174")
-+ ),
-+ MTK_PIN(
-+ 175, "GPIO175",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO175")
-+ ),
-+ MTK_PIN(
-+ 176, "GPIO176",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO176")
-+ ),
-+ MTK_PIN(
-+ 177, "GPIO177",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO177")
-+ ),
-+ MTK_PIN(
-+ 178, "GPIO178",
-+ MTK_EINT_FUNCTION(0, NO_EINT_SUPPORT),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO178")
-+ ),
-+ MTK_PIN(
-+ 179, "GPIO179",
-+ MTK_EINT_FUNCTION(0, 151),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO179")
-+ ),
-+};
-+
-+#endif /* __PINCTRL_MTK_MT6765_H */
---- /dev/null
-+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-mt6797.h
-@@ -0,0 +1,2429 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+/*
-+ * Based on pinctrl-mtk-mt6765.h
-+ *
-+ * Copyright (C) 2018 MediaTek Inc.
-+ *
-+ * Author: ZH Chen <zh.chen@mediatek.com>
-+ *
-+ * Copyright (c) 2018 Manivannan Sadhasivam
-+ */
-+
-+#ifndef __PINCTRL_MTK_MT6797_H
-+#define __PINCTRL_MTK_MT6797_H
-+
-+#include "pinctrl-paris.h"
-+
-+static const struct mtk_pin_desc mtk_pins_mt6797[] = {
-+ MTK_PIN(
-+ 0, "GPIO0",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO0"),
-+ MTK_FUNCTION(1, "CSI0A_L0P_T0A")
-+ ),
-+ MTK_PIN(
-+ 1, "GPIO1",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO1"),
-+ MTK_FUNCTION(1, "CSI0A_L0N_T0B")
-+ ),
-+ MTK_PIN(
-+ 2, "GPIO2",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO2"),
-+ MTK_FUNCTION(1, "CSI0A_L1P_T0C")
-+ ),
-+ MTK_PIN(
-+ 3, "GPIO3",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO3"),
-+ MTK_FUNCTION(1, "CSI0A_L1N_T1A")
-+ ),
-+ MTK_PIN(
-+ 4, "GPIO4",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO4"),
-+ MTK_FUNCTION(1, "CSI0A_L2P_T1B")
-+ ),
-+ MTK_PIN(
-+ 5, "GPIO5",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO5"),
-+ MTK_FUNCTION(1, "CSI0A_L2N_T1C")
-+ ),
-+ MTK_PIN(
-+ 6, "GPIO6",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO6"),
-+ MTK_FUNCTION(1, "CSI0B_L0P_T0A")
-+ ),
-+ MTK_PIN(
-+ 7, "GPIO7",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO7"),
-+ MTK_FUNCTION(1, "CSI0B_L0N_T0B")
-+ ),
-+ MTK_PIN(
-+ 8, "GPIO8",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO8"),
-+ MTK_FUNCTION(1, "CSI0B_L1P_T0C")
-+ ),
-+ MTK_PIN(
-+ 9, "GPIO9",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO9"),
-+ MTK_FUNCTION(1, "CSI0B_L1N_T1A")
-+ ),
-+ MTK_PIN(
-+ 10, "GPIO10",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO10"),
-+ MTK_FUNCTION(1, "CSI1A_L0P_T0A")
-+ ),
-+ MTK_PIN(
-+ 11, "GPIO11",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO11"),
-+ MTK_FUNCTION(1, "CSI1A_L0N_T0B")
-+ ),
-+ MTK_PIN(
-+ 12, "GPIO12",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO12"),
-+ MTK_FUNCTION(1, "CSI1A_L1P_T0C")
-+ ),
-+ MTK_PIN(
-+ 13, "GPIO13",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO13"),
-+ MTK_FUNCTION(1, "CSI1A_L1N_T1A")
-+ ),
-+ MTK_PIN(
-+ 14, "GPIO14",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO14"),
-+ MTK_FUNCTION(1, "CSI1A_L2P_T1B")
-+ ),
-+ MTK_PIN(
-+ 15, "GPIO15",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO15"),
-+ MTK_FUNCTION(1, "CSI1A_L2N_T1C")
-+ ),
-+ MTK_PIN(
-+ 16, "GPIO16",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO16"),
-+ MTK_FUNCTION(1, "CSI1B_L0P_T0A")
-+ ),
-+ MTK_PIN(
-+ 17, "GPIO17",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO17"),
-+ MTK_FUNCTION(1, "CSI1B_L0N_T0B")
-+ ),
-+ MTK_PIN(
-+ 18, "GPIO18",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO18"),
-+ MTK_FUNCTION(1, "CSI1B_L1P_T0C")
-+ ),
-+ MTK_PIN(
-+ 19, "GPIO19",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO19"),
-+ MTK_FUNCTION(1, "CSI1B_L1N_T1A")
-+ ),
-+ MTK_PIN(
-+ 20, "GPIO20",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO20"),
-+ MTK_FUNCTION(1, "CSI1B_L2P_T1B")
-+ ),
-+ MTK_PIN(
-+ 21, "GPIO21",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO21"),
-+ MTK_FUNCTION(1, "CSI1B_L2N_T1C")
-+ ),
-+ MTK_PIN(
-+ 22, "GPIO22",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO22"),
-+ MTK_FUNCTION(1, "CSI2_L0P_T0A")
-+ ),
-+ MTK_PIN(
-+ 23, "GPIO23",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO23"),
-+ MTK_FUNCTION(1, "CSI2_L0N_T0B")
-+ ),
-+ MTK_PIN(
-+ 24, "GPIO24",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO24"),
-+ MTK_FUNCTION(1, "CSI2_L1P_T0C")
-+ ),
-+ MTK_PIN(
-+ 25, "GPIO25",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO25"),
-+ MTK_FUNCTION(1, "CSI2_L1N_T1A")
-+ ),
-+ MTK_PIN(
-+ 26, "GPIO26",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO26"),
-+ MTK_FUNCTION(1, "CSI2_L2P_T1B")
-+ ),
-+ MTK_PIN(
-+ 27, "GPIO27",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO27"),
-+ MTK_FUNCTION(1, "CSI2_L2N_T1C")
-+ ),
-+ MTK_PIN(
-+ 28, "GPIO28",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO28"),
-+ MTK_FUNCTION(1, "SPI5_CLK_A"),
-+ MTK_FUNCTION(2, "IRTX_OUT"),
-+ MTK_FUNCTION(3, "UDI_TDO"),
-+ MTK_FUNCTION(4, "SCP_JTAG_TDO"),
-+ MTK_FUNCTION(5, "CONN_MCU_TDO"),
-+ MTK_FUNCTION(6, "PWM_A"),
-+ MTK_FUNCTION(7, "C2K_DM_OTDO")
-+ ),
-+ MTK_PIN(
-+ 29, "GPIO29",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO29"),
-+ MTK_FUNCTION(1, "SPI5_MI_A"),
-+ MTK_FUNCTION(2, "DAP_SIB1_SWD"),
-+ MTK_FUNCTION(3, "UDI_TMS"),
-+ MTK_FUNCTION(4, "SCP_JTAG_TMS"),
-+ MTK_FUNCTION(5, "CONN_MCU_TMS"),
-+ MTK_FUNCTION(6, "CONN_MCU_AICE_TMSC"),
-+ MTK_FUNCTION(7, "C2K_DM_OTMS")
-+ ),
-+ MTK_PIN(
-+ 30, "GPIO30",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO30"),
-+ MTK_FUNCTION(1, "CMMCLK0"),
-+ MTK_FUNCTION(7, "MD_CLKM0")
-+ ),
-+ MTK_PIN(
-+ 31, "GPIO31",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO31"),
-+ MTK_FUNCTION(1, "CMMCLK1"),
-+ MTK_FUNCTION(7, "MD_CLKM1")
-+ ),
-+ MTK_PIN(
-+ 32, "GPIO32",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO32"),
-+ MTK_FUNCTION(1, "SPI5_CS_A"),
-+ MTK_FUNCTION(2, "DAP_SIB1_SWCK"),
-+ MTK_FUNCTION(3, "UDI_TCK_XI"),
-+ MTK_FUNCTION(4, "SCP_JTAG_TCK"),
-+ MTK_FUNCTION(5, "CONN_MCU_TCK"),
-+ MTK_FUNCTION(6, "CONN_MCU_AICE_TCKC"),
-+ MTK_FUNCTION(7, "C2K_DM_OTCK")
-+ ),
-+ MTK_PIN(
-+ 33, "GPIO33",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO33"),
-+ MTK_FUNCTION(1, "SPI5_MO_A"),
-+ MTK_FUNCTION(2, "CMFLASH"),
-+ MTK_FUNCTION(3, "UDI_TDI"),
-+ MTK_FUNCTION(4, "SCP_JTAG_TDI"),
-+ MTK_FUNCTION(5, "CONN_MCU_TDI"),
-+ MTK_FUNCTION(6, "MD_URXD0"),
-+ MTK_FUNCTION(7, "C2K_DM_OTDI")
-+ ),
-+ MTK_PIN(
-+ 34, "GPIO34",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO34"),
-+ MTK_FUNCTION(1, "CMFLASH"),
-+ MTK_FUNCTION(2, "CLKM0"),
-+ MTK_FUNCTION(3, "UDI_NTRST"),
-+ MTK_FUNCTION(4, "SCP_JTAG_TRSTN"),
-+ MTK_FUNCTION(5, "CONN_MCU_TRST_B"),
-+ MTK_FUNCTION(6, "MD_UTXD0"),
-+ MTK_FUNCTION(7, "C2K_DM_JTINTP")
-+ ),
-+ MTK_PIN(
-+ 35, "GPIO35",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO35"),
-+ MTK_FUNCTION(1, "CMMCLK3"),
-+ MTK_FUNCTION(2, "CLKM1"),
-+ MTK_FUNCTION(3, "MD_URXD1"),
-+ MTK_FUNCTION(4, "PTA_RXD"),
-+ MTK_FUNCTION(5, "CONN_MCU_DBGACK_N"),
-+ MTK_FUNCTION(6, "PWM_B"),
-+ MTK_FUNCTION(7, "PCC_PPC_IO")
-+ ),
-+ MTK_PIN(
-+ 36, "GPIO36",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO36"),
-+ MTK_FUNCTION(1, "CMMCLK2"),
-+ MTK_FUNCTION(2, "CLKM2"),
-+ MTK_FUNCTION(3, "MD_UTXD1"),
-+ MTK_FUNCTION(4, "PTA_TXD"),
-+ MTK_FUNCTION(5, "CONN_MCU_DBGI_N"),
-+ MTK_FUNCTION(6, "PWM_C"),
-+ MTK_FUNCTION(7, "EXT_FRAME_SYNC")
-+ ),
-+ MTK_PIN(
-+ 37, "GPIO37",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO37"),
-+ MTK_FUNCTION(1, "SCL0_0")
-+ ),
-+ MTK_PIN(
-+ 38, "GPIO38",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO38"),
-+ MTK_FUNCTION(1, "SDA0_0")
-+ ),
-+ MTK_PIN(
-+ 39, "GPIO39",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO39"),
-+ MTK_FUNCTION(1, "DPI_D0"),
-+ MTK_FUNCTION(2, "SPI1_CLK_A"),
-+ MTK_FUNCTION(3, "PCM0_SYNC"),
-+ MTK_FUNCTION(4, "I2S0_LRCK"),
-+ MTK_FUNCTION(5, "CONN_MCU_TRST_B"),
-+ MTK_FUNCTION(6, "URXD3"),
-+ MTK_FUNCTION(7, "C2K_NTRST")
-+ ),
-+ MTK_PIN(
-+ 40, "GPIO40",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO40"),
-+ MTK_FUNCTION(1, "DPI_D1"),
-+ MTK_FUNCTION(2, "SPI1_MI_A"),
-+ MTK_FUNCTION(3, "PCM0_CLK"),
-+ MTK_FUNCTION(4, "I2S0_BCK"),
-+ MTK_FUNCTION(5, "CONN_MCU_TDO"),
-+ MTK_FUNCTION(6, "UTXD3"),
-+ MTK_FUNCTION(7, "C2K_TCK")
-+ ),
-+ MTK_PIN(
-+ 41, "GPIO41",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO41"),
-+ MTK_FUNCTION(1, "DPI_D2"),
-+ MTK_FUNCTION(2, "SPI1_CS_A"),
-+ MTK_FUNCTION(3, "PCM0_DO"),
-+ MTK_FUNCTION(4, "I2S3_DO"),
-+ MTK_FUNCTION(5, "CONN_MCU_DBGACK_N"),
-+ MTK_FUNCTION(6, "URTS3"),
-+ MTK_FUNCTION(7, "C2K_TDI")
-+ ),
-+ MTK_PIN(
-+ 42, "GPIO42",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO42"),
-+ MTK_FUNCTION(1, "DPI_D3"),
-+ MTK_FUNCTION(2, "SPI1_MO_A"),
-+ MTK_FUNCTION(3, "PCM0_DI"),
-+ MTK_FUNCTION(4, "I2S0_DI"),
-+ MTK_FUNCTION(5, "CONN_MCU_TDI"),
-+ MTK_FUNCTION(6, "UCTS3"),
-+ MTK_FUNCTION(7, "C2K_TMS")
-+ ),
-+ MTK_PIN(
-+ 43, "GPIO43",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO43"),
-+ MTK_FUNCTION(1, "DPI_D4"),
-+ MTK_FUNCTION(2, "SPI2_CLK_A"),
-+ MTK_FUNCTION(3, "PCM1_SYNC"),
-+ MTK_FUNCTION(4, "I2S2_LRCK"),
-+ MTK_FUNCTION(5, "CONN_MCU_TMS"),
-+ MTK_FUNCTION(6, "CONN_MCU_AICE_TMSC"),
-+ MTK_FUNCTION(7, "C2K_TDO")
-+ ),
-+ MTK_PIN(
-+ 44, "GPIO44",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO44"),
-+ MTK_FUNCTION(1, "DPI_D5"),
-+ MTK_FUNCTION(2, "SPI2_MI_A"),
-+ MTK_FUNCTION(3, "PCM1_CLK"),
-+ MTK_FUNCTION(4, "I2S2_BCK"),
-+ MTK_FUNCTION(5, "CONN_MCU_TCK"),
-+ MTK_FUNCTION(6, "CONN_MCU_AICE_TCKC"),
-+ MTK_FUNCTION(7, "C2K_RTCK")
-+ ),
-+ MTK_PIN(
-+ 45, "GPIO45",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO45"),
-+ MTK_FUNCTION(1, "DPI_D6"),
-+ MTK_FUNCTION(2, "SPI2_CS_A"),
-+ MTK_FUNCTION(3, "PCM1_DI"),
-+ MTK_FUNCTION(4, "I2S2_DI"),
-+ MTK_FUNCTION(5, "CONN_MCU_DBGI_N"),
-+ MTK_FUNCTION(6, "MD_URXD0")
-+ ),
-+ MTK_PIN(
-+ 46, "GPIO46",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO46"),
-+ MTK_FUNCTION(1, "DPI_D7"),
-+ MTK_FUNCTION(2, "SPI2_MO_A"),
-+ MTK_FUNCTION(3, "PCM1_DO0"),
-+ MTK_FUNCTION(4, "I2S1_DO"),
-+ MTK_FUNCTION(5, "ANT_SEL0"),
-+ MTK_FUNCTION(6, "MD_UTXD0")
-+ ),
-+ MTK_PIN(
-+ 47, "GPIO47",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO47"),
-+ MTK_FUNCTION(1, "DPI_D8"),
-+ MTK_FUNCTION(2, "CLKM0"),
-+ MTK_FUNCTION(3, "PCM1_DO1"),
-+ MTK_FUNCTION(4, "I2S0_MCK"),
-+ MTK_FUNCTION(5, "ANT_SEL1"),
-+ MTK_FUNCTION(6, "PTA_RXD"),
-+ MTK_FUNCTION(7, "C2K_URXD0")
-+ ),
-+ MTK_PIN(
-+ 48, "GPIO48",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO48"),
-+ MTK_FUNCTION(1, "DPI_D9"),
-+ MTK_FUNCTION(2, "CLKM1"),
-+ MTK_FUNCTION(3, "CMFLASH"),
-+ MTK_FUNCTION(4, "I2S2_MCK"),
-+ MTK_FUNCTION(5, "ANT_SEL2"),
-+ MTK_FUNCTION(6, "PTA_TXD"),
-+ MTK_FUNCTION(7, "C2K_UTXD0")
-+ ),
-+ MTK_PIN(
-+ 49, "GPIO49",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO49"),
-+ MTK_FUNCTION(1, "DPI_D10"),
-+ MTK_FUNCTION(2, "MD_INT1_C2K_UIM1_HOT_PLUG_IN"),
-+ MTK_FUNCTION(3, "PWM_C"),
-+ MTK_FUNCTION(4, "IRTX_OUT"),
-+ MTK_FUNCTION(5, "ANT_SEL3"),
-+ MTK_FUNCTION(6, "MD_URXD1")
-+ ),
-+ MTK_PIN(
-+ 50, "GPIO50",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO50"),
-+ MTK_FUNCTION(1, "DPI_D11"),
-+ MTK_FUNCTION(2, "MD_INT2"),
-+ MTK_FUNCTION(3, "PWM_D"),
-+ MTK_FUNCTION(4, "CLKM2"),
-+ MTK_FUNCTION(5, "ANT_SEL4"),
-+ MTK_FUNCTION(6, "MD_UTXD1")
-+ ),
-+ MTK_PIN(
-+ 51, "GPIO51",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO51"),
-+ MTK_FUNCTION(1, "DPI_DE"),
-+ MTK_FUNCTION(2, "SPI4_CLK_A"),
-+ MTK_FUNCTION(3, "IRTX_OUT"),
-+ MTK_FUNCTION(4, "SCL0_1"),
-+ MTK_FUNCTION(5, "ANT_SEL5"),
-+ MTK_FUNCTION(7, "C2K_UTXD1")
-+ ),
-+ MTK_PIN(
-+ 52, "GPIO52",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO52"),
-+ MTK_FUNCTION(1, "DPI_CK"),
-+ MTK_FUNCTION(2, "SPI4_MI_A"),
-+ MTK_FUNCTION(3, "SPI4_MO_A"),
-+ MTK_FUNCTION(4, "SDA0_1"),
-+ MTK_FUNCTION(5, "ANT_SEL6"),
-+ MTK_FUNCTION(7, "C2K_URXD1")
-+ ),
-+ MTK_PIN(
-+ 53, "GPIO53",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO53"),
-+ MTK_FUNCTION(1, "DPI_HSYNC"),
-+ MTK_FUNCTION(2, "SPI4_CS_A"),
-+ MTK_FUNCTION(3, "CMFLASH"),
-+ MTK_FUNCTION(4, "SCL1_1"),
-+ MTK_FUNCTION(5, "ANT_SEL7"),
-+ MTK_FUNCTION(6, "MD_URXD2"),
-+ MTK_FUNCTION(7, "PCC_PPC_IO")
-+ ),
-+ MTK_PIN(
-+ 54, "GPIO54",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO54"),
-+ MTK_FUNCTION(1, "DPI_VSYNC"),
-+ MTK_FUNCTION(2, "SPI4_MO_A"),
-+ MTK_FUNCTION(3, "SPI4_MI_A"),
-+ MTK_FUNCTION(4, "SDA1_1"),
-+ MTK_FUNCTION(5, "PWM_A"),
-+ MTK_FUNCTION(6, "MD_UTXD2"),
-+ MTK_FUNCTION(7, "EXT_FRAME_SYNC")
-+ ),
-+ MTK_PIN(
-+ 55, "GPIO55",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO55"),
-+ MTK_FUNCTION(1, "SCL1_0")
-+ ),
-+ MTK_PIN(
-+ 56, "GPIO56",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO56"),
-+ MTK_FUNCTION(1, "SDA1_0")
-+ ),
-+ MTK_PIN(
-+ 57, "GPIO57",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO57"),
-+ MTK_FUNCTION(1, "SPI0_CLK"),
-+ MTK_FUNCTION(2, "SCL0_2"),
-+ MTK_FUNCTION(3, "PWM_B"),
-+ MTK_FUNCTION(4, "UTXD3"),
-+ MTK_FUNCTION(5, "PCM0_SYNC")
-+ ),
-+ MTK_PIN(
-+ 58, "GPIO58",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO58"),
-+ MTK_FUNCTION(1, "SPI0_MI"),
-+ MTK_FUNCTION(2, "SPI0_MO"),
-+ MTK_FUNCTION(3, "SDA1_2"),
-+ MTK_FUNCTION(4, "URXD3"),
-+ MTK_FUNCTION(5, "PCM0_CLK")
-+ ),
-+ MTK_PIN(
-+ 59, "GPIO59",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO59"),
-+ MTK_FUNCTION(1, "SPI0_MO"),
-+ MTK_FUNCTION(2, "SPI0_MI"),
-+ MTK_FUNCTION(3, "PWM_C"),
-+ MTK_FUNCTION(4, "URTS3"),
-+ MTK_FUNCTION(5, "PCM0_DO")
-+ ),
-+ MTK_PIN(
-+ 60, "GPIO60",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO60"),
-+ MTK_FUNCTION(1, "SPI0_CS"),
-+ MTK_FUNCTION(2, "SDA0_2"),
-+ MTK_FUNCTION(3, "SCL1_2"),
-+ MTK_FUNCTION(4, "UCTS3"),
-+ MTK_FUNCTION(5, "PCM0_DI")
-+ ),
-+ MTK_PIN(
-+ 61, "GPIO61",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO61"),
-+ MTK_FUNCTION(1, "EINT0"),
-+ MTK_FUNCTION(2, "IDDIG"),
-+ MTK_FUNCTION(3, "SPI4_CLK_B"),
-+ MTK_FUNCTION(4, "I2S0_LRCK"),
-+ MTK_FUNCTION(5, "PCM0_SYNC"),
-+ MTK_FUNCTION(7, "C2K_EINT0")
-+ ),
-+ MTK_PIN(
-+ 62, "GPIO62",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO62"),
-+ MTK_FUNCTION(1, "EINT1"),
-+ MTK_FUNCTION(2, "USB_DRVVBUS"),
-+ MTK_FUNCTION(3, "SPI4_MI_B"),
-+ MTK_FUNCTION(4, "I2S0_BCK"),
-+ MTK_FUNCTION(5, "PCM0_CLK"),
-+ MTK_FUNCTION(7, "C2K_EINT1")
-+ ),
-+ MTK_PIN(
-+ 63, "GPIO63",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO63"),
-+ MTK_FUNCTION(1, "EINT2"),
-+ MTK_FUNCTION(2, "IRTX_OUT"),
-+ MTK_FUNCTION(3, "SPI4_MO_B"),
-+ MTK_FUNCTION(4, "I2S0_MCK"),
-+ MTK_FUNCTION(5, "PCM0_DI"),
-+ MTK_FUNCTION(7, "C2K_DM_EINT0")
-+ ),
-+ MTK_PIN(
-+ 64, "GPIO64",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO64"),
-+ MTK_FUNCTION(1, "EINT3"),
-+ MTK_FUNCTION(2, "CMFLASH"),
-+ MTK_FUNCTION(3, "SPI4_CS_B"),
-+ MTK_FUNCTION(4, "I2S0_DI"),
-+ MTK_FUNCTION(5, "PCM0_DO"),
-+ MTK_FUNCTION(7, "C2K_DM_EINT1")
-+ ),
-+ MTK_PIN(
-+ 65, "GPIO65",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO65"),
-+ MTK_FUNCTION(1, "EINT4"),
-+ MTK_FUNCTION(2, "CLKM0"),
-+ MTK_FUNCTION(3, "SPI5_CLK_B"),
-+ MTK_FUNCTION(4, "I2S1_LRCK"),
-+ MTK_FUNCTION(5, "PWM_A"),
-+ MTK_FUNCTION(7, "C2K_DM_EINT2")
-+ ),
-+ MTK_PIN(
-+ 66, "GPIO66",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO66"),
-+ MTK_FUNCTION(1, "EINT5"),
-+ MTK_FUNCTION(2, "CLKM1"),
-+ MTK_FUNCTION(3, "SPI5_MI_B"),
-+ MTK_FUNCTION(4, "I2S1_BCK"),
-+ MTK_FUNCTION(5, "PWM_B"),
-+ MTK_FUNCTION(7, "C2K_DM_EINT3")
-+ ),
-+ MTK_PIN(
-+ 67, "GPIO67",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO67"),
-+ MTK_FUNCTION(1, "EINT6"),
-+ MTK_FUNCTION(2, "CLKM2"),
-+ MTK_FUNCTION(3, "SPI5_MO_B"),
-+ MTK_FUNCTION(4, "I2S1_MCK"),
-+ MTK_FUNCTION(5, "PWM_C"),
-+ MTK_FUNCTION(7, "DBG_MON_A0")
-+ ),
-+ MTK_PIN(
-+ 68, "GPIO68",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO68"),
-+ MTK_FUNCTION(1, "EINT7"),
-+ MTK_FUNCTION(2, "CLKM3"),
-+ MTK_FUNCTION(3, "SPI5_CS_B"),
-+ MTK_FUNCTION(4, "I2S1_DO"),
-+ MTK_FUNCTION(5, "PWM_D"),
-+ MTK_FUNCTION(7, "DBG_MON_A1")
-+ ),
-+ MTK_PIN(
-+ 69, "GPIO69",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO69"),
-+ MTK_FUNCTION(1, "I2S0_LRCK"),
-+ MTK_FUNCTION(2, "I2S3_LRCK"),
-+ MTK_FUNCTION(3, "I2S1_LRCK"),
-+ MTK_FUNCTION(4, "I2S2_LRCK"),
-+ MTK_FUNCTION(7, "DBG_MON_A2")
-+ ),
-+ MTK_PIN(
-+ 70, "GPIO70",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO70"),
-+ MTK_FUNCTION(1, "I2S0_BCK"),
-+ MTK_FUNCTION(2, "I2S3_BCK"),
-+ MTK_FUNCTION(3, "I2S1_BCK"),
-+ MTK_FUNCTION(4, "I2S2_BCK"),
-+ MTK_FUNCTION(7, "DBG_MON_A3")
-+ ),
-+ MTK_PIN(
-+ 71, "GPIO71",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO71"),
-+ MTK_FUNCTION(1, "I2S0_MCK"),
-+ MTK_FUNCTION(2, "I2S3_MCK"),
-+ MTK_FUNCTION(3, "I2S1_MCK"),
-+ MTK_FUNCTION(4, "I2S2_MCK"),
-+ MTK_FUNCTION(7, "DBG_MON_A4")
-+ ),
-+ MTK_PIN(
-+ 72, "GPIO72",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO72"),
-+ MTK_FUNCTION(1, "I2S0_DI"),
-+ MTK_FUNCTION(2, "I2S0_DI"),
-+ MTK_FUNCTION(3, "I2S2_DI"),
-+ MTK_FUNCTION(4, "I2S2_DI"),
-+ MTK_FUNCTION(7, "DBG_MON_A5")
-+ ),
-+ MTK_PIN(
-+ 73, "GPIO73",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO73"),
-+ MTK_FUNCTION(1, "I2S3_DO"),
-+ MTK_FUNCTION(2, "I2S3_DO"),
-+ MTK_FUNCTION(3, "I2S1_DO"),
-+ MTK_FUNCTION(4, "I2S1_DO"),
-+ MTK_FUNCTION(7, "DBG_MON_A6")
-+ ),
-+ MTK_PIN(
-+ 74, "GPIO74",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO74"),
-+ MTK_FUNCTION(1, "SCL3_0"),
-+ MTK_FUNCTION(7, "AUXIF_CLK1")
-+ ),
-+ MTK_PIN(
-+ 75, "GPIO75",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO75"),
-+ MTK_FUNCTION(1, "SDA3_0"),
-+ MTK_FUNCTION(7, "AUXIF_ST1")
-+ ),
-+ MTK_PIN(
-+ 76, "GPIO76",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO76"),
-+ MTK_FUNCTION(1, "CONN_HRST_B"),
-+ MTK_FUNCTION(7, "C2K_DM_EINT0")
-+ ),
-+ MTK_PIN(
-+ 77, "GPIO77",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO77"),
-+ MTK_FUNCTION(1, "CONN_TOP_CLK"),
-+ MTK_FUNCTION(7, "C2K_DM_EINT1")
-+ ),
-+ MTK_PIN(
-+ 78, "GPIO78",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO78"),
-+ MTK_FUNCTION(1, "CONN_TOP_DATA"),
-+ MTK_FUNCTION(7, "C2K_DM_EINT2")
-+ ),
-+ MTK_PIN(
-+ 79, "GPIO79",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO79"),
-+ MTK_FUNCTION(1, "CONN_WB_PTA"),
-+ MTK_FUNCTION(7, "C2K_DM_EINT3")
-+ ),
-+ MTK_PIN(
-+ 80, "GPIO80",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO80"),
-+ MTK_FUNCTION(1, "CONN_WF_HB0"),
-+ MTK_FUNCTION(7, "C2K_EINT0")
-+ ),
-+ MTK_PIN(
-+ 81, "GPIO81",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO81"),
-+ MTK_FUNCTION(1, "CONN_WF_HB1"),
-+ MTK_FUNCTION(7, "C2K_EINT1")
-+ ),
-+ MTK_PIN(
-+ 82, "GPIO82",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO82"),
-+ MTK_FUNCTION(1, "CONN_WF_HB2"),
-+ MTK_FUNCTION(7, "MD_CLKM0")
-+ ),
-+ MTK_PIN(
-+ 83, "GPIO83",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO83"),
-+ MTK_FUNCTION(1, "CONN_BT_CLK"),
-+ MTK_FUNCTION(7, "MD_CLKM1")
-+ ),
-+ MTK_PIN(
-+ 84, "GPIO84",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO84"),
-+ MTK_FUNCTION(1, "CONN_BT_DATA")
-+ ),
-+ MTK_PIN(
-+ 85, "GPIO85",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO85"),
-+ MTK_FUNCTION(1, "EINT8"),
-+ MTK_FUNCTION(2, "I2S1_LRCK"),
-+ MTK_FUNCTION(3, "I2S2_LRCK"),
-+ MTK_FUNCTION(4, "URXD1"),
-+ MTK_FUNCTION(5, "MD_URXD0"),
-+ MTK_FUNCTION(7, "DBG_MON_A7")
-+ ),
-+ MTK_PIN(
-+ 86, "GPIO86",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO86"),
-+ MTK_FUNCTION(1, "EINT9"),
-+ MTK_FUNCTION(2, "I2S1_BCK"),
-+ MTK_FUNCTION(3, "I2S2_BCK"),
-+ MTK_FUNCTION(4, "UTXD1"),
-+ MTK_FUNCTION(5, "MD_UTXD0"),
-+ MTK_FUNCTION(7, "DBG_MON_A8")
-+ ),
-+ MTK_PIN(
-+ 87, "GPIO87",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO87"),
-+ MTK_FUNCTION(1, "EINT10"),
-+ MTK_FUNCTION(2, "I2S1_MCK"),
-+ MTK_FUNCTION(3, "I2S2_MCK"),
-+ MTK_FUNCTION(4, "URTS1"),
-+ MTK_FUNCTION(5, "MD_URXD1"),
-+ MTK_FUNCTION(7, "DBG_MON_A9")
-+ ),
-+ MTK_PIN(
-+ 88, "GPIO88",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO88"),
-+ MTK_FUNCTION(1, "EINT11"),
-+ MTK_FUNCTION(2, "I2S1_DO"),
-+ MTK_FUNCTION(3, "I2S2_DI"),
-+ MTK_FUNCTION(4, "UCTS1"),
-+ MTK_FUNCTION(5, "MD_UTXD1"),
-+ MTK_FUNCTION(7, "DBG_MON_A10")
-+ ),
-+ MTK_PIN(
-+ 89, "GPIO89",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO89"),
-+ MTK_FUNCTION(1, "EINT12"),
-+ MTK_FUNCTION(2, "IRTX_OUT"),
-+ MTK_FUNCTION(3, "CLKM0"),
-+ MTK_FUNCTION(4, "PCM1_SYNC"),
-+ MTK_FUNCTION(5, "URTS0"),
-+ MTK_FUNCTION(7, "DBG_MON_A11")
-+ ),
-+ MTK_PIN(
-+ 90, "GPIO90",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO90"),
-+ MTK_FUNCTION(1, "EINT13"),
-+ MTK_FUNCTION(2, "CMFLASH"),
-+ MTK_FUNCTION(3, "CLKM1"),
-+ MTK_FUNCTION(4, "PCM1_CLK"),
-+ MTK_FUNCTION(5, "UCTS0"),
-+ MTK_FUNCTION(7, "C2K_DM_EINT0")
-+ ),
-+ MTK_PIN(
-+ 91, "GPIO91",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO91"),
-+ MTK_FUNCTION(1, "EINT14"),
-+ MTK_FUNCTION(2, "PWM_A"),
-+ MTK_FUNCTION(3, "CLKM2"),
-+ MTK_FUNCTION(4, "PCM1_DI"),
-+ MTK_FUNCTION(5, "SDA0_3"),
-+ MTK_FUNCTION(7, "C2K_DM_EINT1")
-+ ),
-+ MTK_PIN(
-+ 92, "GPIO92",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO92"),
-+ MTK_FUNCTION(1, "EINT15"),
-+ MTK_FUNCTION(2, "PWM_B"),
-+ MTK_FUNCTION(3, "CLKM3"),
-+ MTK_FUNCTION(4, "PCM1_DO0"),
-+ MTK_FUNCTION(5, "SCL0_3")
-+ ),
-+ MTK_PIN(
-+ 93, "GPIO93",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO93"),
-+ MTK_FUNCTION(1, "EINT16"),
-+ MTK_FUNCTION(2, "IDDIG"),
-+ MTK_FUNCTION(3, "CLKM4"),
-+ MTK_FUNCTION(4, "PCM1_DO1"),
-+ MTK_FUNCTION(5, "MD_INT2"),
-+ MTK_FUNCTION(7, "DROP_ZONE")
-+ ),
-+ MTK_PIN(
-+ 94, "GPIO94",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO94"),
-+ MTK_FUNCTION(1, "USB_DRVVBUS"),
-+ MTK_FUNCTION(2, "PWM_C"),
-+ MTK_FUNCTION(3, "CLKM5")
-+ ),
-+ MTK_PIN(
-+ 95, "GPIO95",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO95"),
-+ MTK_FUNCTION(1, "SDA2_0"),
-+ MTK_FUNCTION(7, "AUXIF_ST0")
-+ ),
-+ MTK_PIN(
-+ 96, "GPIO96",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO96"),
-+ MTK_FUNCTION(1, "SCL2_0"),
-+ MTK_FUNCTION(7, "AUXIF_CLK0")
-+ ),
-+ MTK_PIN(
-+ 97, "GPIO97",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO97"),
-+ MTK_FUNCTION(1, "URXD0"),
-+ MTK_FUNCTION(2, "UTXD0"),
-+ MTK_FUNCTION(3, "MD_URXD0"),
-+ MTK_FUNCTION(4, "MD_URXD1"),
-+ MTK_FUNCTION(5, "MD_URXD2"),
-+ MTK_FUNCTION(6, "C2K_URXD0"),
-+ MTK_FUNCTION(7, "C2K_URXD1")
-+ ),
-+ MTK_PIN(
-+ 98, "GPIO98",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO98"),
-+ MTK_FUNCTION(1, "UTXD0"),
-+ MTK_FUNCTION(2, "URXD0"),
-+ MTK_FUNCTION(3, "MD_UTXD0"),
-+ MTK_FUNCTION(4, "MD_UTXD1"),
-+ MTK_FUNCTION(5, "MD_UTXD2"),
-+ MTK_FUNCTION(6, "C2K_UTXD0"),
-+ MTK_FUNCTION(7, "C2K_UTXD1")
-+ ),
-+ MTK_PIN(
-+ 99, "GPIO99",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO99"),
-+ MTK_FUNCTION(1, "RTC32K_CK")
-+ ),
-+ MTK_PIN(
-+ 100, "GPIO100",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO100"),
-+ MTK_FUNCTION(1, "SRCLKENAI0")
-+ ),
-+ MTK_PIN(
-+ 101, "GPIO101",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO101"),
-+ MTK_FUNCTION(1, "SRCLKENAI1")
-+ ),
-+ MTK_PIN(
-+ 102, "GPIO102",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO102"),
-+ MTK_FUNCTION(1, "SRCLKENA0")
-+ ),
-+ MTK_PIN(
-+ 103, "GPIO103",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO103"),
-+ MTK_FUNCTION(1, "SRCLKENA1")
-+ ),
-+ MTK_PIN(
-+ 104, "GPIO104",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO104"),
-+ MTK_FUNCTION(1, "SYSRSTB")
-+ ),
-+ MTK_PIN(
-+ 105, "GPIO105",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO105"),
-+ MTK_FUNCTION(1, "WATCHDOG")
-+ ),
-+ MTK_PIN(
-+ 106, "GPIO106",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO106"),
-+ MTK_FUNCTION(1, "KPROW0"),
-+ MTK_FUNCTION(2, "CMFLASH"),
-+ MTK_FUNCTION(3, "CLKM4"),
-+ MTK_FUNCTION(4, "TP_GPIO0_AO"),
-+ MTK_FUNCTION(5, "IRTX_OUT")
-+ ),
-+ MTK_PIN(
-+ 107, "GPIO107",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO107"),
-+ MTK_FUNCTION(1, "KPROW1"),
-+ MTK_FUNCTION(2, "IDDIG"),
-+ MTK_FUNCTION(3, "CLKM5"),
-+ MTK_FUNCTION(4, "TP_GPIO1_AO"),
-+ MTK_FUNCTION(5, "I2S1_BCK"),
-+ MTK_FUNCTION(7, "DAP_SIB1_SWD")
-+ ),
-+ MTK_PIN(
-+ 108, "GPIO108",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO108"),
-+ MTK_FUNCTION(1, "KPROW2"),
-+ MTK_FUNCTION(2, "USB_DRVVBUS"),
-+ MTK_FUNCTION(3, "PWM_A"),
-+ MTK_FUNCTION(4, "CMFLASH"),
-+ MTK_FUNCTION(5, "I2S1_LRCK"),
-+ MTK_FUNCTION(7, "DAP_SIB1_SWCK")
-+ ),
-+ MTK_PIN(
-+ 109, "GPIO109",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO109"),
-+ MTK_FUNCTION(1, "KPCOL0")
-+ ),
-+ MTK_PIN(
-+ 110, "GPIO110",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO110"),
-+ MTK_FUNCTION(1, "KPCOL1"),
-+ MTK_FUNCTION(2, "SDA1_3"),
-+ MTK_FUNCTION(3, "PWM_B"),
-+ MTK_FUNCTION(4, "CLKM0"),
-+ MTK_FUNCTION(5, "I2S1_DO"),
-+ MTK_FUNCTION(7, "C2K_DM_EINT3")
-+ ),
-+ MTK_PIN(
-+ 111, "GPIO111",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO111"),
-+ MTK_FUNCTION(1, "KPCOL2"),
-+ MTK_FUNCTION(2, "SCL1_3"),
-+ MTK_FUNCTION(3, "PWM_C"),
-+ MTK_FUNCTION(4, "DISP_PWM"),
-+ MTK_FUNCTION(5, "I2S1_MCK"),
-+ MTK_FUNCTION(7, "C2K_DM_EINT2")
-+ ),
-+ MTK_PIN(
-+ 112, "GPIO112",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO112"),
-+ MTK_FUNCTION(1, "MD_INT1_C2K_UIM1_HOT_PLUG_IN"),
-+ MTK_FUNCTION(7, "C2K_DM_EINT1")
-+ ),
-+ MTK_PIN(
-+ 113, "GPIO113",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO113"),
-+ MTK_FUNCTION(1, "MD_INT0_C2K_UIM0_HOT_PLUG_IN"),
-+ MTK_FUNCTION(7, "C2K_DM_EINT0")
-+ ),
-+ MTK_PIN(
-+ 114, "GPIO114",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO114"),
-+ MTK_FUNCTION(1, "MSDC0_DAT0")
-+ ),
-+ MTK_PIN(
-+ 115, "GPIO115",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO115"),
-+ MTK_FUNCTION(1, "MSDC0_DAT1")
-+ ),
-+ MTK_PIN(
-+ 116, "GPIO116",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO116"),
-+ MTK_FUNCTION(1, "MSDC0_DAT2")
-+ ),
-+ MTK_PIN(
-+ 117, "GPIO117",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO117"),
-+ MTK_FUNCTION(1, "MSDC0_DAT3")
-+ ),
-+ MTK_PIN(
-+ 118, "GPIO118",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO118"),
-+ MTK_FUNCTION(1, "MSDC0_DAT4")
-+ ),
-+ MTK_PIN(
-+ 119, "GPIO119",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO119"),
-+ MTK_FUNCTION(1, "MSDC0_DAT5")
-+ ),
-+ MTK_PIN(
-+ 120, "GPIO120",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO120"),
-+ MTK_FUNCTION(1, "MSDC0_DAT6")
-+ ),
-+ MTK_PIN(
-+ 121, "GPIO121",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO121"),
-+ MTK_FUNCTION(1, "MSDC0_DAT7")
-+ ),
-+ MTK_PIN(
-+ 122, "GPIO122",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO122"),
-+ MTK_FUNCTION(1, "MSDC0_CMD")
-+ ),
-+ MTK_PIN(
-+ 123, "GPIO123",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO123"),
-+ MTK_FUNCTION(1, "MSDC0_CLK")
-+ ),
-+ MTK_PIN(
-+ 124, "GPIO124",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO124"),
-+ MTK_FUNCTION(1, "MSDC0_DSL")
-+ ),
-+ MTK_PIN(
-+ 125, "GPIO125",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO125"),
-+ MTK_FUNCTION(1, "MSDC0_RSTB")
-+ ),
-+ MTK_PIN(
-+ 126, "GPIO126",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO126"),
-+ MTK_FUNCTION(1, "MD1_SIM1_SCLK"),
-+ MTK_FUNCTION(2, "MD1_SIM2_SCLK"),
-+ MTK_FUNCTION(3, "C2K_UIM0_CLK"),
-+ MTK_FUNCTION(4, "C2K_UIM1_CLK")
-+ ),
-+ MTK_PIN(
-+ 127, "GPIO127",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO127"),
-+ MTK_FUNCTION(1, "MD1_SIM1_SRST"),
-+ MTK_FUNCTION(2, "MD1_SIM2_SRST"),
-+ MTK_FUNCTION(3, "C2K_UIM0_RST"),
-+ MTK_FUNCTION(4, "C2K_UIM1_RST")
-+ ),
-+ MTK_PIN(
-+ 128, "GPIO128",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO128"),
-+ MTK_FUNCTION(1, "MD1_SIM1_SIO"),
-+ MTK_FUNCTION(2, "MD1_SIM2_SIO"),
-+ MTK_FUNCTION(3, "C2K_UIM0_IO"),
-+ MTK_FUNCTION(4, "C2K_UIM1_IO")
-+ ),
-+ MTK_PIN(
-+ 129, "GPIO129",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO129"),
-+ MTK_FUNCTION(1, "MSDC1_CMD"),
-+ MTK_FUNCTION(2, "CONN_DSP_JMS"),
-+ MTK_FUNCTION(3, "LTE_JTAG_TMS"),
-+ MTK_FUNCTION(4, "UDI_TMS"),
-+ MTK_FUNCTION(5, "C2K_TMS")
-+ ),
-+ MTK_PIN(
-+ 130, "GPIO130",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO130"),
-+ MTK_FUNCTION(1, "MSDC1_DAT0"),
-+ MTK_FUNCTION(2, "CONN_DSP_JDI"),
-+ MTK_FUNCTION(3, "LTE_JTAG_TDI"),
-+ MTK_FUNCTION(4, "UDI_TDI"),
-+ MTK_FUNCTION(5, "C2K_TDI")
-+ ),
-+ MTK_PIN(
-+ 131, "GPIO131",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO131"),
-+ MTK_FUNCTION(1, "MSDC1_DAT1"),
-+ MTK_FUNCTION(2, "CONN_DSP_JDO"),
-+ MTK_FUNCTION(3, "LTE_JTAG_TDO"),
-+ MTK_FUNCTION(4, "UDI_TDO"),
-+ MTK_FUNCTION(5, "C2K_TDO")
-+ ),
-+ MTK_PIN(
-+ 132, "GPIO132",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO132"),
-+ MTK_FUNCTION(1, "MSDC1_DAT2"),
-+ MTK_FUNCTION(5, "C2K_RTCK")
-+ ),
-+ MTK_PIN(
-+ 133, "GPIO133",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO133"),
-+ MTK_FUNCTION(1, "MSDC1_DAT3"),
-+ MTK_FUNCTION(2, "CONN_DSP_JINTP"),
-+ MTK_FUNCTION(3, "LTE_JTAG_TRSTN"),
-+ MTK_FUNCTION(4, "UDI_NTRST"),
-+ MTK_FUNCTION(5, "C2K_NTRST")
-+ ),
-+ MTK_PIN(
-+ 134, "GPIO134",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO134"),
-+ MTK_FUNCTION(1, "MSDC1_CLK"),
-+ MTK_FUNCTION(2, "CONN_DSP_JCK"),
-+ MTK_FUNCTION(3, "LTE_JTAG_TCK"),
-+ MTK_FUNCTION(4, "UDI_TCK_XI"),
-+ MTK_FUNCTION(5, "C2K_TCK")
-+ ),
-+ MTK_PIN(
-+ 135, "GPIO135",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO135"),
-+ MTK_FUNCTION(1, "TDM_LRCK"),
-+ MTK_FUNCTION(2, "I2S0_LRCK"),
-+ MTK_FUNCTION(3, "CLKM0"),
-+ MTK_FUNCTION(4, "PCM1_SYNC"),
-+ MTK_FUNCTION(5, "PWM_A"),
-+ MTK_FUNCTION(7, "DBG_MON_A12")
-+ ),
-+ MTK_PIN(
-+ 136, "GPIO136",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO136"),
-+ MTK_FUNCTION(1, "TDM_BCK"),
-+ MTK_FUNCTION(2, "I2S0_BCK"),
-+ MTK_FUNCTION(3, "CLKM1"),
-+ MTK_FUNCTION(4, "PCM1_CLK"),
-+ MTK_FUNCTION(5, "PWM_B"),
-+ MTK_FUNCTION(7, "DBG_MON_A13")
-+ ),
-+ MTK_PIN(
-+ 137, "GPIO137",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO137"),
-+ MTK_FUNCTION(1, "TDM_MCK"),
-+ MTK_FUNCTION(2, "I2S0_MCK"),
-+ MTK_FUNCTION(3, "CLKM2"),
-+ MTK_FUNCTION(4, "PCM1_DI"),
-+ MTK_FUNCTION(5, "IRTX_OUT"),
-+ MTK_FUNCTION(7, "DBG_MON_A14")
-+ ),
-+ MTK_PIN(
-+ 138, "GPIO138",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO138"),
-+ MTK_FUNCTION(1, "TDM_DATA0"),
-+ MTK_FUNCTION(2, "I2S0_DI"),
-+ MTK_FUNCTION(3, "CLKM3"),
-+ MTK_FUNCTION(4, "PCM1_DO0"),
-+ MTK_FUNCTION(5, "PWM_C"),
-+ MTK_FUNCTION(6, "SDA3_1"),
-+ MTK_FUNCTION(7, "DBG_MON_A15")
-+ ),
-+ MTK_PIN(
-+ 139, "GPIO139",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO139"),
-+ MTK_FUNCTION(1, "TDM_DATA1"),
-+ MTK_FUNCTION(2, "I2S3_DO"),
-+ MTK_FUNCTION(3, "CLKM4"),
-+ MTK_FUNCTION(4, "PCM1_DO1"),
-+ MTK_FUNCTION(5, "ANT_SEL2"),
-+ MTK_FUNCTION(6, "SCL3_1"),
-+ MTK_FUNCTION(7, "DBG_MON_A16")
-+ ),
-+ MTK_PIN(
-+ 140, "GPIO140",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO140"),
-+ MTK_FUNCTION(1, "TDM_DATA2"),
-+ MTK_FUNCTION(2, "DISP_PWM"),
-+ MTK_FUNCTION(3, "CLKM5"),
-+ MTK_FUNCTION(4, "SDA1_4"),
-+ MTK_FUNCTION(5, "ANT_SEL1"),
-+ MTK_FUNCTION(6, "URXD3"),
-+ MTK_FUNCTION(7, "DBG_MON_A17")
-+ ),
-+ MTK_PIN(
-+ 141, "GPIO141",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO141"),
-+ MTK_FUNCTION(1, "TDM_DATA3"),
-+ MTK_FUNCTION(2, "CMFLASH"),
-+ MTK_FUNCTION(3, "IRTX_OUT"),
-+ MTK_FUNCTION(4, "SCL1_4"),
-+ MTK_FUNCTION(5, "ANT_SEL0"),
-+ MTK_FUNCTION(6, "UTXD3"),
-+ MTK_FUNCTION(7, "DBG_MON_A18")
-+ ),
-+ MTK_PIN(
-+ 142, "GPIO142",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO142"),
-+ MTK_FUNCTION(1, "PWRAP_SPI0_MI"),
-+ MTK_FUNCTION(2, "PWRAP_SPI0_MO")
-+ ),
-+ MTK_PIN(
-+ 143, "GPIO143",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO143"),
-+ MTK_FUNCTION(1, "PWRAP_SPI0_MO"),
-+ MTK_FUNCTION(2, "PWRAP_SPI0_MI")
-+ ),
-+ MTK_PIN(
-+ 144, "GPIO144",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO144"),
-+ MTK_FUNCTION(1, "PWRAP_SPI0_CK")
-+ ),
-+ MTK_PIN(
-+ 145, "GPIO145",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO145"),
-+ MTK_FUNCTION(1, "PWRAP_SPI0_CSN")
-+ ),
-+ MTK_PIN(
-+ 146, "GPIO146",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO146"),
-+ MTK_FUNCTION(1, "AUD_CLK_MOSI")
-+ ),
-+ MTK_PIN(
-+ 147, "GPIO147",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO147"),
-+ MTK_FUNCTION(1, "AUD_DAT_MISO"),
-+ MTK_FUNCTION(2, "AUD_DAT_MOSI"),
-+ MTK_FUNCTION(3, "VOW_DAT_MISO")
-+ ),
-+ MTK_PIN(
-+ 148, "GPIO148",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO148"),
-+ MTK_FUNCTION(1, "AUD_DAT_MOSI"),
-+ MTK_FUNCTION(2, "AUD_DAT_MISO")
-+ ),
-+ MTK_PIN(
-+ 149, "GPIO149",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO149"),
-+ MTK_FUNCTION(1, "VOW_CLK_MISO")
-+ ),
-+ MTK_PIN(
-+ 150, "GPIO150",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO150"),
-+ MTK_FUNCTION(1, "ANC_DAT_MOSI")
-+ ),
-+ MTK_PIN(
-+ 151, "GPIO151",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO151"),
-+ MTK_FUNCTION(1, "SCL6_0")
-+ ),
-+ MTK_PIN(
-+ 152, "GPIO152",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO152"),
-+ MTK_FUNCTION(1, "SDA6_0")
-+ ),
-+ MTK_PIN(
-+ 153, "GPIO153",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO153"),
-+ MTK_FUNCTION(1, "SCL7_0")
-+ ),
-+ MTK_PIN(
-+ 154, "GPIO154",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO154"),
-+ MTK_FUNCTION(1, "SDA7_0")
-+ ),
-+ MTK_PIN(
-+ 155, "GPIO155",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO155"),
-+ MTK_FUNCTION(1, "MD1_SIM2_SCLK"),
-+ MTK_FUNCTION(2, "MD1_SIM1_SCLK"),
-+ MTK_FUNCTION(3, "C2K_UIM0_CLK"),
-+ MTK_FUNCTION(4, "C2K_UIM1_CLK")
-+ ),
-+ MTK_PIN(
-+ 156, "GPIO156",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO156"),
-+ MTK_FUNCTION(1, "MD1_SIM2_SRST"),
-+ MTK_FUNCTION(2, "MD1_SIM1_SRST"),
-+ MTK_FUNCTION(3, "C2K_UIM0_RST"),
-+ MTK_FUNCTION(4, "C2K_UIM1_RST")
-+ ),
-+ MTK_PIN(
-+ 157, "GPIO157",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO157"),
-+ MTK_FUNCTION(1, "MD1_SIM2_SIO"),
-+ MTK_FUNCTION(2, "MD1_SIM1_SIO"),
-+ MTK_FUNCTION(3, "C2K_UIM0_IO"),
-+ MTK_FUNCTION(4, "C2K_UIM1_IO")
-+ ),
-+ MTK_PIN(
-+ 158, "GPIO158",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO158"),
-+ MTK_FUNCTION(1, "MIPI_TDP0")
-+ ),
-+ MTK_PIN(
-+ 159, "GPIO159",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO159"),
-+ MTK_FUNCTION(1, "MIPI_TDN0")
-+ ),
-+ MTK_PIN(
-+ 160, "GPIO160",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO160"),
-+ MTK_FUNCTION(1, "MIPI_TDP1")
-+ ),
-+ MTK_PIN(
-+ 161, "GPIO161",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO161"),
-+ MTK_FUNCTION(1, "MIPI_TDN1")
-+ ),
-+ MTK_PIN(
-+ 162, "GPIO162",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO162"),
-+ MTK_FUNCTION(1, "MIPI_TCP")
-+ ),
-+ MTK_PIN(
-+ 163, "GPIO163",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO163"),
-+ MTK_FUNCTION(1, "MIPI_TCN")
-+ ),
-+ MTK_PIN(
-+ 164, "GPIO164",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO164"),
-+ MTK_FUNCTION(1, "MIPI_TDP2")
-+ ),
-+ MTK_PIN(
-+ 165, "GPIO165",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO165"),
-+ MTK_FUNCTION(1, "MIPI_TDN2")
-+ ),
-+ MTK_PIN(
-+ 166, "GPIO166",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO166"),
-+ MTK_FUNCTION(1, "MIPI_TDP3")
-+ ),
-+ MTK_PIN(
-+ 167, "GPIO167",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO167"),
-+ MTK_FUNCTION(1, "MIPI_TDN3")
-+ ),
-+ MTK_PIN(
-+ 168, "GPIO168",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO168"),
-+ MTK_FUNCTION(1, "MIPI_TDP0_A")
-+ ),
-+ MTK_PIN(
-+ 169, "GPIO169",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO169"),
-+ MTK_FUNCTION(1, "MIPI_TDN0_A")
-+ ),
-+ MTK_PIN(
-+ 170, "GPIO170",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO170"),
-+ MTK_FUNCTION(1, "MIPI_TDP1_A")
-+ ),
-+ MTK_PIN(
-+ 171, "GPIO171",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO171"),
-+ MTK_FUNCTION(1, "MIPI_TDN1_A")
-+ ),
-+ MTK_PIN(
-+ 172, "GPIO172",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO172"),
-+ MTK_FUNCTION(1, "MIPI_TCP_A")
-+ ),
-+ MTK_PIN(
-+ 173, "GPIO173",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO173"),
-+ MTK_FUNCTION(1, "MIPI_TCN_A")
-+ ),
-+ MTK_PIN(
-+ 174, "GPIO174",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO174"),
-+ MTK_FUNCTION(1, "MIPI_TDP2_A")
-+ ),
-+ MTK_PIN(
-+ 175, "GPIO175",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO175"),
-+ MTK_FUNCTION(1, "MIPI_TDN2_A")
-+ ),
-+ MTK_PIN(
-+ 176, "GPIO176",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO176"),
-+ MTK_FUNCTION(1, "MIPI_TDP3_A")
-+ ),
-+ MTK_PIN(
-+ 177, "GPIO177",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO177"),
-+ MTK_FUNCTION(1, "MIPI_TDN3_A")
-+ ),
-+ MTK_PIN(
-+ 178, "GPIO178",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO178"),
-+ MTK_FUNCTION(1, "DISP_PWM"),
-+ MTK_FUNCTION(2, "PWM_D"),
-+ MTK_FUNCTION(3, "CLKM5"),
-+ MTK_FUNCTION(7, "DBG_MON_A19")
-+ ),
-+ MTK_PIN(
-+ 179, "GPIO179",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO179"),
-+ MTK_FUNCTION(1, "DSI_TE0"),
-+ MTK_FUNCTION(7, "DBG_MON_A20")
-+ ),
-+ MTK_PIN(
-+ 180, "GPIO180",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO180"),
-+ MTK_FUNCTION(1, "LCM_RST"),
-+ MTK_FUNCTION(2, "DSI_TE1"),
-+ MTK_FUNCTION(7, "DBG_MON_A21")
-+ ),
-+ MTK_PIN(
-+ 181, "GPIO181",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO181"),
-+ MTK_FUNCTION(1, "IDDIG"),
-+ MTK_FUNCTION(2, "DSI_TE1"),
-+ MTK_FUNCTION(7, "DBG_MON_A22")
-+ ),
-+ MTK_PIN(
-+ 182, "GPIO182",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO182"),
-+ MTK_FUNCTION(1, "TESTMODE")
-+ ),
-+ MTK_PIN(
-+ 183, "GPIO183",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO183"),
-+ MTK_FUNCTION(1, "RFIC0_BSI_CK"),
-+ MTK_FUNCTION(2, "SPM_BSI_CK"),
-+ MTK_FUNCTION(7, "DBG_MON_B27")
-+ ),
-+ MTK_PIN(
-+ 184, "GPIO184",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO184"),
-+ MTK_FUNCTION(1, "RFIC0_BSI_EN"),
-+ MTK_FUNCTION(2, "SPM_BSI_EN"),
-+ MTK_FUNCTION(7, "DBG_MON_B28")
-+ ),
-+ MTK_PIN(
-+ 185, "GPIO185",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO185"),
-+ MTK_FUNCTION(1, "RFIC0_BSI_D0"),
-+ MTK_FUNCTION(2, "SPM_BSI_D0"),
-+ MTK_FUNCTION(7, "DBG_MON_B29")
-+ ),
-+ MTK_PIN(
-+ 186, "GPIO186",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO186"),
-+ MTK_FUNCTION(1, "RFIC0_BSI_D1"),
-+ MTK_FUNCTION(2, "SPM_BSI_D1"),
-+ MTK_FUNCTION(7, "DBG_MON_B30")
-+ ),
-+ MTK_PIN(
-+ 187, "GPIO187",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO187"),
-+ MTK_FUNCTION(1, "RFIC0_BSI_D2"),
-+ MTK_FUNCTION(2, "SPM_BSI_D2"),
-+ MTK_FUNCTION(7, "DBG_MON_B31")
-+ ),
-+ MTK_PIN(
-+ 188, "GPIO188",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO188"),
-+ MTK_FUNCTION(1, "MIPI0_SCLK"),
-+ MTK_FUNCTION(7, "DBG_MON_B32")
-+ ),
-+ MTK_PIN(
-+ 189, "GPIO189",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO189"),
-+ MTK_FUNCTION(1, "MIPI0_SDATA")
-+ ),
-+ MTK_PIN(
-+ 190, "GPIO190",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO190"),
-+ MTK_FUNCTION(1, "MIPI1_SCLK")
-+ ),
-+ MTK_PIN(
-+ 191, "GPIO191",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO191"),
-+ MTK_FUNCTION(1, "MIPI1_SDATA")
-+ ),
-+ MTK_PIN(
-+ 192, "GPIO192",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO192"),
-+ MTK_FUNCTION(1, "BPI_BUS4")
-+ ),
-+ MTK_PIN(
-+ 193, "GPIO193",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO193"),
-+ MTK_FUNCTION(1, "BPI_BUS5"),
-+ MTK_FUNCTION(7, "DBG_MON_B0")
-+ ),
-+ MTK_PIN(
-+ 194, "GPIO194",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO194"),
-+ MTK_FUNCTION(1, "BPI_BUS6"),
-+ MTK_FUNCTION(7, "DBG_MON_B1")
-+ ),
-+ MTK_PIN(
-+ 195, "GPIO195",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO195"),
-+ MTK_FUNCTION(1, "BPI_BUS7"),
-+ MTK_FUNCTION(7, "DBG_MON_B2")
-+ ),
-+ MTK_PIN(
-+ 196, "GPIO196",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO196"),
-+ MTK_FUNCTION(1, "BPI_BUS8"),
-+ MTK_FUNCTION(7, "DBG_MON_B3")
-+ ),
-+ MTK_PIN(
-+ 197, "GPIO197",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO197"),
-+ MTK_FUNCTION(1, "BPI_BUS9"),
-+ MTK_FUNCTION(7, "DBG_MON_B4")
-+ ),
-+ MTK_PIN(
-+ 198, "GPIO198",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO198"),
-+ MTK_FUNCTION(1, "BPI_BUS10"),
-+ MTK_FUNCTION(7, "DBG_MON_B5")
-+ ),
-+ MTK_PIN(
-+ 199, "GPIO199",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO199"),
-+ MTK_FUNCTION(1, "BPI_BUS11"),
-+ MTK_FUNCTION(7, "DBG_MON_B6")
-+ ),
-+ MTK_PIN(
-+ 200, "GPIO200",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO200"),
-+ MTK_FUNCTION(1, "BPI_BUS12"),
-+ MTK_FUNCTION(7, "DBG_MON_B7")
-+ ),
-+ MTK_PIN(
-+ 201, "GPIO201",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO201"),
-+ MTK_FUNCTION(1, "BPI_BUS13"),
-+ MTK_FUNCTION(7, "DBG_MON_B8")
-+ ),
-+ MTK_PIN(
-+ 202, "GPIO202",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO202"),
-+ MTK_FUNCTION(1, "BPI_BUS14"),
-+ MTK_FUNCTION(7, "DBG_MON_B9")
-+ ),
-+ MTK_PIN(
-+ 203, "GPIO203",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO203"),
-+ MTK_FUNCTION(1, "BPI_BUS15"),
-+ MTK_FUNCTION(7, "DBG_MON_B10")
-+ ),
-+ MTK_PIN(
-+ 204, "GPIO204",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO204"),
-+ MTK_FUNCTION(1, "BPI_BUS16"),
-+ MTK_FUNCTION(2, "PA_VM0"),
-+ MTK_FUNCTION(7, "DBG_MON_B11")
-+ ),
-+ MTK_PIN(
-+ 205, "GPIO205",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO205"),
-+ MTK_FUNCTION(1, "BPI_BUS17"),
-+ MTK_FUNCTION(2, "PA_VM1"),
-+ MTK_FUNCTION(7, "DBG_MON_B12")
-+ ),
-+ MTK_PIN(
-+ 206, "GPIO206",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO206"),
-+ MTK_FUNCTION(1, "BPI_BUS18"),
-+ MTK_FUNCTION(2, "TX_SWAP0"),
-+ MTK_FUNCTION(7, "DBG_MON_B13")
-+ ),
-+ MTK_PIN(
-+ 207, "GPIO207",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO207"),
-+ MTK_FUNCTION(1, "BPI_BUS19"),
-+ MTK_FUNCTION(2, "TX_SWAP1"),
-+ MTK_FUNCTION(7, "DBG_MON_B14")
-+ ),
-+ MTK_PIN(
-+ 208, "GPIO208",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO208"),
-+ MTK_FUNCTION(1, "BPI_BUS20"),
-+ MTK_FUNCTION(2, "TX_SWAP2"),
-+ MTK_FUNCTION(7, "DBG_MON_B15")
-+ ),
-+ MTK_PIN(
-+ 209, "GPIO209",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO209"),
-+ MTK_FUNCTION(1, "BPI_BUS21"),
-+ MTK_FUNCTION(2, "TX_SWAP3"),
-+ MTK_FUNCTION(7, "DBG_MON_B16")
-+ ),
-+ MTK_PIN(
-+ 210, "GPIO210",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO210"),
-+ MTK_FUNCTION(1, "BPI_BUS22"),
-+ MTK_FUNCTION(2, "DET_BPI0"),
-+ MTK_FUNCTION(7, "DBG_MON_B17")
-+ ),
-+ MTK_PIN(
-+ 211, "GPIO211",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO211"),
-+ MTK_FUNCTION(1, "BPI_BUS23"),
-+ MTK_FUNCTION(2, "DET_BPI1"),
-+ MTK_FUNCTION(7, "DBG_MON_B18")
-+ ),
-+ MTK_PIN(
-+ 212, "GPIO212",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO212"),
-+ MTK_FUNCTION(1, "BPI_BUS0"),
-+ MTK_FUNCTION(7, "DBG_MON_B19")
-+ ),
-+ MTK_PIN(
-+ 213, "GPIO213",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO213"),
-+ MTK_FUNCTION(1, "BPI_BUS1"),
-+ MTK_FUNCTION(7, "DBG_MON_B20")
-+ ),
-+ MTK_PIN(
-+ 214, "GPIO214",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO214"),
-+ MTK_FUNCTION(1, "BPI_BUS2"),
-+ MTK_FUNCTION(7, "DBG_MON_B21")
-+ ),
-+ MTK_PIN(
-+ 215, "GPIO215",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO215"),
-+ MTK_FUNCTION(1, "BPI_BUS3"),
-+ MTK_FUNCTION(7, "DBG_MON_B22")
-+ ),
-+ MTK_PIN(
-+ 216, "GPIO216",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO216"),
-+ MTK_FUNCTION(1, "MIPI2_SCLK"),
-+ MTK_FUNCTION(7, "DBG_MON_B23")
-+ ),
-+ MTK_PIN(
-+ 217, "GPIO217",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO217"),
-+ MTK_FUNCTION(1, "MIPI2_SDATA"),
-+ MTK_FUNCTION(7, "DBG_MON_B24")
-+ ),
-+ MTK_PIN(
-+ 218, "GPIO218",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO218"),
-+ MTK_FUNCTION(1, "MIPI3_SCLK"),
-+ MTK_FUNCTION(7, "DBG_MON_B25")
-+ ),
-+ MTK_PIN(
-+ 219, "GPIO219",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO219"),
-+ MTK_FUNCTION(1, "MIPI3_SDATA"),
-+ MTK_FUNCTION(7, "DBG_MON_B26")
-+ ),
-+ MTK_PIN(
-+ 220, "GPIO220",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO220"),
-+ MTK_FUNCTION(1, "CONN_WF_IP")
-+ ),
-+ MTK_PIN(
-+ 221, "GPIO221",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO221"),
-+ MTK_FUNCTION(1, "CONN_WF_IN")
-+ ),
-+ MTK_PIN(
-+ 222, "GPIO222",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO222"),
-+ MTK_FUNCTION(1, "CONN_WF_QP")
-+ ),
-+ MTK_PIN(
-+ 223, "GPIO223",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO223"),
-+ MTK_FUNCTION(1, "CONN_WF_QN")
-+ ),
-+ MTK_PIN(
-+ 224, "GPIO224",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO224"),
-+ MTK_FUNCTION(1, "CONN_BT_IP")
-+ ),
-+ MTK_PIN(
-+ 225, "GPIO225",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO225"),
-+ MTK_FUNCTION(1, "CONN_BT_IN")
-+ ),
-+ MTK_PIN(
-+ 226, "GPIO226",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO226"),
-+ MTK_FUNCTION(1, "CONN_BT_QP")
-+ ),
-+ MTK_PIN(
-+ 227, "GPIO227",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO227"),
-+ MTK_FUNCTION(1, "CONN_BT_QN")
-+ ),
-+ MTK_PIN(
-+ 228, "GPIO228",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO228"),
-+ MTK_FUNCTION(1, "CONN_GPS_IP")
-+ ),
-+ MTK_PIN(
-+ 229, "GPIO229",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO229"),
-+ MTK_FUNCTION(1, "CONN_GPS_IN")
-+ ),
-+ MTK_PIN(
-+ 230, "GPIO230",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO230"),
-+ MTK_FUNCTION(1, "CONN_GPS_QP")
-+ ),
-+ MTK_PIN(
-+ 231, "GPIO231",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO231"),
-+ MTK_FUNCTION(1, "CONN_GPS_QN")
-+ ),
-+ MTK_PIN(
-+ 232, "GPIO232",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO232"),
-+ MTK_FUNCTION(1, "URXD1"),
-+ MTK_FUNCTION(2, "UTXD1"),
-+ MTK_FUNCTION(3, "MD_URXD0"),
-+ MTK_FUNCTION(4, "MD_URXD1"),
-+ MTK_FUNCTION(5, "MD_URXD2"),
-+ MTK_FUNCTION(6, "C2K_URXD0"),
-+ MTK_FUNCTION(7, "C2K_URXD1")
-+ ),
-+ MTK_PIN(
-+ 233, "GPIO233",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO233"),
-+ MTK_FUNCTION(1, "UTXD1"),
-+ MTK_FUNCTION(2, "URXD1"),
-+ MTK_FUNCTION(3, "MD_UTXD0"),
-+ MTK_FUNCTION(4, "MD_UTXD1"),
-+ MTK_FUNCTION(5, "MD_UTXD2"),
-+ MTK_FUNCTION(6, "C2K_UTXD0"),
-+ MTK_FUNCTION(7, "C2K_UTXD1")
-+ ),
-+ MTK_PIN(
-+ 234, "GPIO234",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO234"),
-+ MTK_FUNCTION(1, "SPI1_CLK_B"),
-+ MTK_FUNCTION(2, "TP_UTXD1_AO"),
-+ MTK_FUNCTION(3, "SCL4_1"),
-+ MTK_FUNCTION(4, "UTXD0"),
-+ MTK_FUNCTION(6, "PWM_A"),
-+ MTK_FUNCTION(7, "DBG_MON_A23")
-+ ),
-+ MTK_PIN(
-+ 235, "GPIO235",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO235"),
-+ MTK_FUNCTION(1, "SPI1_MI_B"),
-+ MTK_FUNCTION(2, "SPI1_MO_B"),
-+ MTK_FUNCTION(3, "SDA4_1"),
-+ MTK_FUNCTION(4, "URXD0"),
-+ MTK_FUNCTION(6, "CLKM0"),
-+ MTK_FUNCTION(7, "DBG_MON_A24")
-+ ),
-+ MTK_PIN(
-+ 236, "GPIO236",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO236"),
-+ MTK_FUNCTION(1, "SPI1_MO_B"),
-+ MTK_FUNCTION(2, "SPI1_MI_B"),
-+ MTK_FUNCTION(3, "SCL5_1"),
-+ MTK_FUNCTION(4, "URTS0"),
-+ MTK_FUNCTION(6, "PWM_B"),
-+ MTK_FUNCTION(7, "DBG_MON_A25")
-+ ),
-+ MTK_PIN(
-+ 237, "GPIO237",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO237"),
-+ MTK_FUNCTION(1, "SPI1_CS_B"),
-+ MTK_FUNCTION(2, "TP_URXD1_AO"),
-+ MTK_FUNCTION(3, "SDA5_1"),
-+ MTK_FUNCTION(4, "UCTS0"),
-+ MTK_FUNCTION(6, "CLKM1"),
-+ MTK_FUNCTION(7, "DBG_MON_A26")
-+ ),
-+ MTK_PIN(
-+ 238, "GPIO238",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO238"),
-+ MTK_FUNCTION(1, "SDA4_0")
-+ ),
-+ MTK_PIN(
-+ 239, "GPIO239",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO239"),
-+ MTK_FUNCTION(1, "SCL4_0")
-+ ),
-+ MTK_PIN(
-+ 240, "GPIO240",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO240"),
-+ MTK_FUNCTION(1, "SDA5_0")
-+ ),
-+ MTK_PIN(
-+ 241, "GPIO241",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO241"),
-+ MTK_FUNCTION(1, "SCL5_0")
-+ ),
-+ MTK_PIN(
-+ 242, "GPIO242",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO242"),
-+ MTK_FUNCTION(1, "SPI2_CLK_B"),
-+ MTK_FUNCTION(2, "TP_UTXD2_AO"),
-+ MTK_FUNCTION(3, "SCL4_2"),
-+ MTK_FUNCTION(4, "UTXD1"),
-+ MTK_FUNCTION(5, "URTS3"),
-+ MTK_FUNCTION(6, "PWM_C"),
-+ MTK_FUNCTION(7, "DBG_MON_A27")
-+ ),
-+ MTK_PIN(
-+ 243, "GPIO243",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO243"),
-+ MTK_FUNCTION(1, "SPI2_MI_B"),
-+ MTK_FUNCTION(2, "SPI2_MO_B"),
-+ MTK_FUNCTION(3, "SDA4_2"),
-+ MTK_FUNCTION(4, "URXD1"),
-+ MTK_FUNCTION(5, "UCTS3"),
-+ MTK_FUNCTION(6, "CLKM2"),
-+ MTK_FUNCTION(7, "DBG_MON_A28")
-+ ),
-+ MTK_PIN(
-+ 244, "GPIO244",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO244"),
-+ MTK_FUNCTION(1, "SPI2_MO_B"),
-+ MTK_FUNCTION(2, "SPI2_MI_B"),
-+ MTK_FUNCTION(3, "SCL5_2"),
-+ MTK_FUNCTION(4, "URTS1"),
-+ MTK_FUNCTION(5, "UTXD3"),
-+ MTK_FUNCTION(6, "PWM_D"),
-+ MTK_FUNCTION(7, "DBG_MON_A29")
-+ ),
-+ MTK_PIN(
-+ 245, "GPIO245",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO245"),
-+ MTK_FUNCTION(1, "SPI2_CS_B"),
-+ MTK_FUNCTION(2, "TP_URXD2_AO"),
-+ MTK_FUNCTION(3, "SDA5_2"),
-+ MTK_FUNCTION(4, "UCTS1"),
-+ MTK_FUNCTION(5, "URXD3"),
-+ MTK_FUNCTION(6, "CLKM3"),
-+ MTK_FUNCTION(7, "DBG_MON_A30")
-+ ),
-+ MTK_PIN(
-+ 246, "GPIO246",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO246"),
-+ MTK_FUNCTION(1, "I2S1_LRCK"),
-+ MTK_FUNCTION(2, "I2S2_LRCK"),
-+ MTK_FUNCTION(3, "I2S0_LRCK"),
-+ MTK_FUNCTION(4, "I2S3_LRCK"),
-+ MTK_FUNCTION(5, "PCM0_SYNC"),
-+ MTK_FUNCTION(6, "SPI5_CLK_C"),
-+ MTK_FUNCTION(7, "DBG_MON_A31")
-+ ),
-+ MTK_PIN(
-+ 247, "GPIO247",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO247"),
-+ MTK_FUNCTION(1, "I2S1_BCK"),
-+ MTK_FUNCTION(2, "I2S2_BCK"),
-+ MTK_FUNCTION(3, "I2S0_BCK"),
-+ MTK_FUNCTION(4, "I2S3_BCK"),
-+ MTK_FUNCTION(5, "PCM0_CLK"),
-+ MTK_FUNCTION(6, "SPI5_MI_C"),
-+ MTK_FUNCTION(7, "DBG_MON_A32")
-+ ),
-+ MTK_PIN(
-+ 248, "GPIO248",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO248"),
-+ MTK_FUNCTION(1, "I2S2_DI"),
-+ MTK_FUNCTION(2, "I2S2_DI"),
-+ MTK_FUNCTION(3, "I2S0_DI"),
-+ MTK_FUNCTION(4, "I2S0_DI"),
-+ MTK_FUNCTION(5, "PCM0_DI"),
-+ MTK_FUNCTION(6, "SPI5_CS_C")
-+ ),
-+ MTK_PIN(
-+ 249, "GPIO249",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO249"),
-+ MTK_FUNCTION(1, "I2S1_DO"),
-+ MTK_FUNCTION(2, "I2S1_DO"),
-+ MTK_FUNCTION(3, "I2S3_DO"),
-+ MTK_FUNCTION(4, "I2S3_DO"),
-+ MTK_FUNCTION(5, "PCM0_DO"),
-+ MTK_FUNCTION(6, "SPI5_MO_C"),
-+ MTK_FUNCTION(7, "TRAP_SRAM_PWR_BYPASS")
-+ ),
-+ MTK_PIN(
-+ 250, "GPIO250",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO250"),
-+ MTK_FUNCTION(1, "SPI3_MI"),
-+ MTK_FUNCTION(2, "SPI3_MO"),
-+ MTK_FUNCTION(3, "IRTX_OUT"),
-+ MTK_FUNCTION(6, "TP_URXD1_AO"),
-+ MTK_FUNCTION(7, "DROP_ZONE")
-+ ),
-+ MTK_PIN(
-+ 251, "GPIO251",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO251"),
-+ MTK_FUNCTION(1, "SPI3_MO"),
-+ MTK_FUNCTION(2, "SPI3_MI"),
-+ MTK_FUNCTION(3, "CMFLASH"),
-+ MTK_FUNCTION(6, "TP_UTXD1_AO"),
-+ MTK_FUNCTION(7, "C2K_RTCK")
-+ ),
-+ MTK_PIN(
-+ 252, "GPIO252",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO252"),
-+ MTK_FUNCTION(1, "SPI3_CLK"),
-+ MTK_FUNCTION(2, "SCL0_4"),
-+ MTK_FUNCTION(3, "PWM_D"),
-+ MTK_FUNCTION(7, "C2K_TMS")
-+ ),
-+ MTK_PIN(
-+ 253, "GPIO253",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO253"),
-+ MTK_FUNCTION(1, "SPI3_CS"),
-+ MTK_FUNCTION(2, "SDA0_4"),
-+ MTK_FUNCTION(3, "PWM_A"),
-+ MTK_FUNCTION(7, "C2K_TCK")
-+ ),
-+ MTK_PIN(
-+ 254, "GPIO254",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO254"),
-+ MTK_FUNCTION(1, "I2S1_MCK"),
-+ MTK_FUNCTION(2, "I2S2_MCK"),
-+ MTK_FUNCTION(3, "I2S0_MCK"),
-+ MTK_FUNCTION(4, "I2S3_MCK"),
-+ MTK_FUNCTION(5, "CLKM0"),
-+ MTK_FUNCTION(7, "C2K_TDI")
-+ ),
-+ MTK_PIN(
-+ 255, "GPIO255",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO255"),
-+ MTK_FUNCTION(1, "CLKM1"),
-+ MTK_FUNCTION(2, "DISP_PWM"),
-+ MTK_FUNCTION(3, "PWM_B"),
-+ MTK_FUNCTION(6, "TP_GPIO1_AO"),
-+ MTK_FUNCTION(7, "C2K_TDO")
-+ ),
-+ MTK_PIN(
-+ 256, "GPIO256",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO256"),
-+ MTK_FUNCTION(1, "CLKM2"),
-+ MTK_FUNCTION(2, "IRTX_OUT"),
-+ MTK_FUNCTION(3, "PWM_C"),
-+ MTK_FUNCTION(6, "TP_GPIO0_AO"),
-+ MTK_FUNCTION(7, "C2K_NTRST")
-+ ),
-+ MTK_PIN(
-+ 257, "GPIO257",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO257"),
-+ MTK_FUNCTION(1, "IO_JTAG_TMS"),
-+ MTK_FUNCTION(2, "LTE_JTAG_TMS"),
-+ MTK_FUNCTION(3, "DFD_TMS"),
-+ MTK_FUNCTION(4, "DAP_SIB1_SWD"),
-+ MTK_FUNCTION(5, "ANC_JTAG_TMS"),
-+ MTK_FUNCTION(6, "SCP_JTAG_TMS"),
-+ MTK_FUNCTION(7, "C2K_DM_OTMS")
-+ ),
-+ MTK_PIN(
-+ 258, "GPIO258",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO258"),
-+ MTK_FUNCTION(1, "IO_JTAG_TCK"),
-+ MTK_FUNCTION(2, "LTE_JTAG_TCK"),
-+ MTK_FUNCTION(3, "DFD_TCK_XI"),
-+ MTK_FUNCTION(4, "DAP_SIB1_SWCK"),
-+ MTK_FUNCTION(5, "ANC_JTAG_TCK"),
-+ MTK_FUNCTION(6, "SCP_JTAG_TCK"),
-+ MTK_FUNCTION(7, "C2K_DM_OTCK")
-+ ),
-+ MTK_PIN(
-+ 259, "GPIO259",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO259"),
-+ MTK_FUNCTION(1, "IO_JTAG_TDI"),
-+ MTK_FUNCTION(2, "LTE_JTAG_TDI"),
-+ MTK_FUNCTION(3, "DFD_TDI"),
-+ MTK_FUNCTION(5, "ANC_JTAG_TDI"),
-+ MTK_FUNCTION(6, "SCP_JTAG_TDI"),
-+ MTK_FUNCTION(7, "C2K_DM_OTDI")
-+ ),
-+ MTK_PIN(
-+ 260, "GPIO260",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO260"),
-+ MTK_FUNCTION(1, "IO_JTAG_TDO"),
-+ MTK_FUNCTION(2, "LTE_JTAG_TDO"),
-+ MTK_FUNCTION(3, "DFD_TDO"),
-+ MTK_FUNCTION(5, "ANC_JTAG_TDO"),
-+ MTK_FUNCTION(6, "SCP_JTAG_TDO"),
-+ MTK_FUNCTION(7, "C2K_DM_OTDO")
-+ ),
-+ MTK_PIN(
-+ 261, "GPIO261",
-+ MTK_EINT_FUNCTION(NO_EINT_SUPPORT, NO_EINT_SUPPORT),
-+ DRV_GRP3,
-+ MTK_FUNCTION(0, "GPIO261"),
-+ MTK_FUNCTION(2, "LTE_JTAG_TRSTN"),
-+ MTK_FUNCTION(3, "DFD_NTRST"),
-+ MTK_FUNCTION(5, "ANC_JTAG_TRSTN"),
-+ MTK_FUNCTION(6, "SCP_JTAG_TRSTN"),
-+ MTK_FUNCTION(7, "C2K_DM_JTINTP")
-+ ),
-+};
-+
-+#endif /* __PINCTRL_MTK_MT6797_H */
---- /dev/null
-+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-mt8183.h
-@@ -0,0 +1,1916 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+/*
-+ * Copyright (C) 2018 MediaTek Inc.
-+ *
-+ * Author: Zhiyong Tao <zhiyong.tao@mediatek.com>
-+ *
-+ */
-+
-+#ifndef __PINCTRL_MTK_MT8183_H
-+#define __PINCTRL_MTK_MT8183_H
-+
-+#include "pinctrl-paris.h"
-+
-+static struct mtk_pin_desc mtk_pins_mt8183[] = {
-+ MTK_PIN(
-+ 0, "GPIO0",
-+ MTK_EINT_FUNCTION(0, 0),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO0"),
-+ MTK_FUNCTION(1, "MRG_SYNC"),
-+ MTK_FUNCTION(2, "PCM0_SYNC"),
-+ MTK_FUNCTION(3, "TP_GPIO0_AO"),
-+ MTK_FUNCTION(4, "SRCLKENAI0"),
-+ MTK_FUNCTION(5, "SCP_SPI2_CS"),
-+ MTK_FUNCTION(6, "I2S3_MCK"),
-+ MTK_FUNCTION(7, "SPI2_CSB")
-+ ),
-+ MTK_PIN(
-+ 1, "GPIO1",
-+ MTK_EINT_FUNCTION(0, 1),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO1"),
-+ MTK_FUNCTION(1, "MRG_CLK"),
-+ MTK_FUNCTION(2, "PCM0_CLK"),
-+ MTK_FUNCTION(3, "TP_GPIO1_AO"),
-+ MTK_FUNCTION(4, "CLKM3"),
-+ MTK_FUNCTION(5, "SCP_SPI2_MO"),
-+ MTK_FUNCTION(6, "I2S3_BCK"),
-+ MTK_FUNCTION(7, "SPI2_MO")
-+ ),
-+ MTK_PIN(
-+ 2, "GPIO2",
-+ MTK_EINT_FUNCTION(0, 2),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO2"),
-+ MTK_FUNCTION(1, "MRG_DO"),
-+ MTK_FUNCTION(2, "PCM0_DO"),
-+ MTK_FUNCTION(3, "TP_GPIO2_AO"),
-+ MTK_FUNCTION(4, "SCL6"),
-+ MTK_FUNCTION(5, "SCP_SPI2_CK"),
-+ MTK_FUNCTION(6, "I2S3_LRCK"),
-+ MTK_FUNCTION(7, "SPI2_CLK")
-+ ),
-+ MTK_PIN(
-+ 3, "GPIO3",
-+ MTK_EINT_FUNCTION(0, 3),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO3"),
-+ MTK_FUNCTION(1, "MRG_DI"),
-+ MTK_FUNCTION(2, "PCM0_DI"),
-+ MTK_FUNCTION(3, "TP_GPIO3_AO"),
-+ MTK_FUNCTION(4, "SDA6"),
-+ MTK_FUNCTION(5, "TDM_MCK"),
-+ MTK_FUNCTION(6, "I2S3_DO"),
-+ MTK_FUNCTION(7, "SCP_VREQ_VAO")
-+ ),
-+ MTK_PIN(
-+ 4, "GPIO4",
-+ MTK_EINT_FUNCTION(0, 4),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO4"),
-+ MTK_FUNCTION(1, "PWM_B"),
-+ MTK_FUNCTION(2, "I2S0_MCK"),
-+ MTK_FUNCTION(3, "SSPM_UTXD_AO"),
-+ MTK_FUNCTION(4, "MD_URXD1"),
-+ MTK_FUNCTION(5, "TDM_BCK"),
-+ MTK_FUNCTION(6, "TP_GPIO4_AO"),
-+ MTK_FUNCTION(7, "DAP_MD32_SWD")
-+ ),
-+ MTK_PIN(
-+ 5, "GPIO5",
-+ MTK_EINT_FUNCTION(0, 5),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO5"),
-+ MTK_FUNCTION(1, "PWM_C"),
-+ MTK_FUNCTION(2, "I2S0_BCK"),
-+ MTK_FUNCTION(3, "SSPM_URXD_AO"),
-+ MTK_FUNCTION(4, "MD_UTXD1"),
-+ MTK_FUNCTION(5, "TDM_LRCK"),
-+ MTK_FUNCTION(6, "TP_GPIO5_AO"),
-+ MTK_FUNCTION(7, "DAP_MD32_SWCK")
-+ ),
-+ MTK_PIN(
-+ 6, "GPIO6",
-+ MTK_EINT_FUNCTION(0, 6),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO6"),
-+ MTK_FUNCTION(1, "PWM_A"),
-+ MTK_FUNCTION(2, "I2S0_LRCK"),
-+ MTK_FUNCTION(3, "IDDIG"),
-+ MTK_FUNCTION(4, "MD_URXD0"),
-+ MTK_FUNCTION(5, "TDM_DATA0"),
-+ MTK_FUNCTION(6, "TP_GPIO6_AO"),
-+ MTK_FUNCTION(7, "CMFLASH")
-+ ),
-+ MTK_PIN(
-+ 7, "GPIO7",
-+ MTK_EINT_FUNCTION(0, 7),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO7"),
-+ MTK_FUNCTION(1, "SPI1_B_MI"),
-+ MTK_FUNCTION(2, "I2S0_DI"),
-+ MTK_FUNCTION(3, "USB_DRVVBUS"),
-+ MTK_FUNCTION(4, "MD_UTXD0"),
-+ MTK_FUNCTION(5, "TDM_DATA1"),
-+ MTK_FUNCTION(6, "TP_GPIO7_AO"),
-+ MTK_FUNCTION(7, "DVFSRC_EXT_REQ")
-+ ),
-+ MTK_PIN(
-+ 8, "GPIO8",
-+ MTK_EINT_FUNCTION(0, 8),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO8"),
-+ MTK_FUNCTION(1, "SPI1_B_CSB"),
-+ MTK_FUNCTION(2, "ANT_SEL3"),
-+ MTK_FUNCTION(3, "SCL7"),
-+ MTK_FUNCTION(4, "CONN_MCU_TRST_B"),
-+ MTK_FUNCTION(5, "TDM_DATA2"),
-+ MTK_FUNCTION(6, "MD_INT0"),
-+ MTK_FUNCTION(7, "JTRSTN_SEL1")
-+ ),
-+ MTK_PIN(
-+ 9, "GPIO9",
-+ MTK_EINT_FUNCTION(0, 9),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO9"),
-+ MTK_FUNCTION(1, "SPI1_B_MO"),
-+ MTK_FUNCTION(2, "ANT_SEL4"),
-+ MTK_FUNCTION(3, "CMMCLK2"),
-+ MTK_FUNCTION(4, "CONN_MCU_DBGACK_N"),
-+ MTK_FUNCTION(5, "SSPM_JTAG_TRSTN"),
-+ MTK_FUNCTION(6, "IO_JTAG_TRSTN"),
-+ MTK_FUNCTION(7, "DBG_MON_B10")
-+ ),
-+ MTK_PIN(
-+ 10, "GPIO10",
-+ MTK_EINT_FUNCTION(0, 10),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO10"),
-+ MTK_FUNCTION(1, "SPI1_B_CLK"),
-+ MTK_FUNCTION(2, "ANT_SEL5"),
-+ MTK_FUNCTION(3, "CMMCLK3"),
-+ MTK_FUNCTION(4, "CONN_MCU_DBGI_N"),
-+ MTK_FUNCTION(5, "TDM_DATA3"),
-+ MTK_FUNCTION(6, "EXT_FRAME_SYNC"),
-+ MTK_FUNCTION(7, "DBG_MON_B11")
-+ ),
-+ MTK_PIN(
-+ 11, "GPIO11",
-+ MTK_EINT_FUNCTION(0, 11),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO11"),
-+ MTK_FUNCTION(1, "TP_URXD1_AO"),
-+ MTK_FUNCTION(2, "IDDIG"),
-+ MTK_FUNCTION(3, "SCL6"),
-+ MTK_FUNCTION(4, "UCTS1"),
-+ MTK_FUNCTION(5, "UCTS0"),
-+ MTK_FUNCTION(6, "SRCLKENAI1"),
-+ MTK_FUNCTION(7, "I2S5_MCK")
-+ ),
-+ MTK_PIN(
-+ 12, "GPIO12",
-+ MTK_EINT_FUNCTION(0, 12),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO12"),
-+ MTK_FUNCTION(1, "TP_UTXD1_AO"),
-+ MTK_FUNCTION(2, "USB_DRVVBUS"),
-+ MTK_FUNCTION(3, "SDA6"),
-+ MTK_FUNCTION(4, "URTS1"),
-+ MTK_FUNCTION(5, "URTS0"),
-+ MTK_FUNCTION(6, "I2S2_DI2"),
-+ MTK_FUNCTION(7, "I2S5_BCK")
-+ ),
-+ MTK_PIN(
-+ 13, "GPIO13",
-+ MTK_EINT_FUNCTION(0, 13),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO13"),
-+ MTK_FUNCTION(1, "DBPI_D0"),
-+ MTK_FUNCTION(2, "SPI5_MI"),
-+ MTK_FUNCTION(3, "PCM0_SYNC"),
-+ MTK_FUNCTION(4, "MD_URXD0"),
-+ MTK_FUNCTION(5, "ANT_SEL3"),
-+ MTK_FUNCTION(6, "I2S0_MCK"),
-+ MTK_FUNCTION(7, "DBG_MON_B15")
-+ ),
-+ MTK_PIN(
-+ 14, "GPIO14",
-+ MTK_EINT_FUNCTION(0, 14),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO14"),
-+ MTK_FUNCTION(1, "DBPI_D1"),
-+ MTK_FUNCTION(2, "SPI5_CSB"),
-+ MTK_FUNCTION(3, "PCM0_CLK"),
-+ MTK_FUNCTION(4, "MD_UTXD0"),
-+ MTK_FUNCTION(5, "ANT_SEL4"),
-+ MTK_FUNCTION(6, "I2S0_BCK"),
-+ MTK_FUNCTION(7, "DBG_MON_B16")
-+ ),
-+ MTK_PIN(
-+ 15, "GPIO15",
-+ MTK_EINT_FUNCTION(0, 15),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO15"),
-+ MTK_FUNCTION(1, "DBPI_D2"),
-+ MTK_FUNCTION(2, "SPI5_MO"),
-+ MTK_FUNCTION(3, "PCM0_DO"),
-+ MTK_FUNCTION(4, "MD_URXD1"),
-+ MTK_FUNCTION(5, "ANT_SEL5"),
-+ MTK_FUNCTION(6, "I2S0_LRCK"),
-+ MTK_FUNCTION(7, "DBG_MON_B17")
-+ ),
-+ MTK_PIN(
-+ 16, "GPIO16",
-+ MTK_EINT_FUNCTION(0, 16),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO16"),
-+ MTK_FUNCTION(1, "DBPI_D3"),
-+ MTK_FUNCTION(2, "SPI5_CLK"),
-+ MTK_FUNCTION(3, "PCM0_DI"),
-+ MTK_FUNCTION(4, "MD_UTXD1"),
-+ MTK_FUNCTION(5, "ANT_SEL6"),
-+ MTK_FUNCTION(6, "I2S0_DI"),
-+ MTK_FUNCTION(7, "DBG_MON_B23")
-+ ),
-+ MTK_PIN(
-+ 17, "GPIO17",
-+ MTK_EINT_FUNCTION(0, 17),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO17"),
-+ MTK_FUNCTION(1, "DBPI_D4"),
-+ MTK_FUNCTION(2, "SPI4_MI"),
-+ MTK_FUNCTION(3, "CONN_MCU_TRST_B"),
-+ MTK_FUNCTION(4, "MD_INT0"),
-+ MTK_FUNCTION(5, "ANT_SEL7"),
-+ MTK_FUNCTION(6, "I2S3_MCK"),
-+ MTK_FUNCTION(7, "DBG_MON_A1")
-+ ),
-+ MTK_PIN(
-+ 18, "GPIO18",
-+ MTK_EINT_FUNCTION(0, 18),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO18"),
-+ MTK_FUNCTION(1, "DBPI_D5"),
-+ MTK_FUNCTION(2, "SPI4_CSB"),
-+ MTK_FUNCTION(3, "CONN_MCU_DBGI_N"),
-+ MTK_FUNCTION(4, "MD_INT0"),
-+ MTK_FUNCTION(5, "SCP_VREQ_VAO"),
-+ MTK_FUNCTION(6, "I2S3_BCK"),
-+ MTK_FUNCTION(7, "DBG_MON_A2")
-+ ),
-+ MTK_PIN(
-+ 19, "GPIO19",
-+ MTK_EINT_FUNCTION(0, 19),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO19"),
-+ MTK_FUNCTION(1, "DBPI_D6"),
-+ MTK_FUNCTION(2, "SPI4_MO"),
-+ MTK_FUNCTION(3, "CONN_MCU_TDO"),
-+ MTK_FUNCTION(4, "MD_INT2_C2K_UIM1_HOT_PLUG"),
-+ MTK_FUNCTION(5, "URXD1"),
-+ MTK_FUNCTION(6, "I2S3_LRCK"),
-+ MTK_FUNCTION(7, "DBG_MON_A3")
-+ ),
-+ MTK_PIN(
-+ 20, "GPIO20",
-+ MTK_EINT_FUNCTION(0, 20),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO20"),
-+ MTK_FUNCTION(1, "DBPI_D7"),
-+ MTK_FUNCTION(2, "SPI4_CLK"),
-+ MTK_FUNCTION(3, "CONN_MCU_DBGACK_N"),
-+ MTK_FUNCTION(4, "MD_INT1_C2K_UIM0_HOT_PLUG"),
-+ MTK_FUNCTION(5, "UTXD1"),
-+ MTK_FUNCTION(6, "I2S3_DO"),
-+ MTK_FUNCTION(7, "DBG_MON_A19")
-+ ),
-+ MTK_PIN(
-+ 21, "GPIO21",
-+ MTK_EINT_FUNCTION(0, 21),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO21"),
-+ MTK_FUNCTION(1, "DBPI_D8"),
-+ MTK_FUNCTION(2, "SPI3_MI"),
-+ MTK_FUNCTION(3, "CONN_MCU_TMS"),
-+ MTK_FUNCTION(4, "DAP_MD32_SWD"),
-+ MTK_FUNCTION(5, "CONN_MCU_AICE_TMSC"),
-+ MTK_FUNCTION(6, "I2S2_MCK"),
-+ MTK_FUNCTION(7, "DBG_MON_B5")
-+ ),
-+ MTK_PIN(
-+ 22, "GPIO22",
-+ MTK_EINT_FUNCTION(0, 22),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO22"),
-+ MTK_FUNCTION(1, "DBPI_D9"),
-+ MTK_FUNCTION(2, "SPI3_CSB"),
-+ MTK_FUNCTION(3, "CONN_MCU_TCK"),
-+ MTK_FUNCTION(4, "DAP_MD32_SWCK"),
-+ MTK_FUNCTION(5, "CONN_MCU_AICE_TCKC"),
-+ MTK_FUNCTION(6, "I2S2_BCK"),
-+ MTK_FUNCTION(7, "DBG_MON_B6")
-+ ),
-+ MTK_PIN(
-+ 23, "GPIO23",
-+ MTK_EINT_FUNCTION(0, 23),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO23"),
-+ MTK_FUNCTION(1, "DBPI_D10"),
-+ MTK_FUNCTION(2, "SPI3_MO"),
-+ MTK_FUNCTION(3, "CONN_MCU_TDI"),
-+ MTK_FUNCTION(4, "UCTS1"),
-+ MTK_FUNCTION(5, "EXT_FRAME_SYNC"),
-+ MTK_FUNCTION(6, "I2S2_LRCK"),
-+ MTK_FUNCTION(7, "DBG_MON_B7")
-+ ),
-+ MTK_PIN(
-+ 24, "GPIO24",
-+ MTK_EINT_FUNCTION(0, 24),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO24"),
-+ MTK_FUNCTION(1, "DBPI_D11"),
-+ MTK_FUNCTION(2, "SPI3_CLK"),
-+ MTK_FUNCTION(3, "SRCLKENAI0"),
-+ MTK_FUNCTION(4, "URTS1"),
-+ MTK_FUNCTION(5, "IO_JTAG_TCK"),
-+ MTK_FUNCTION(6, "I2S2_DI"),
-+ MTK_FUNCTION(7, "DBG_MON_B31")
-+ ),
-+ MTK_PIN(
-+ 25, "GPIO25",
-+ MTK_EINT_FUNCTION(0, 25),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO25"),
-+ MTK_FUNCTION(1, "DBPI_HSYNC"),
-+ MTK_FUNCTION(2, "ANT_SEL0"),
-+ MTK_FUNCTION(3, "SCL6"),
-+ MTK_FUNCTION(4, "KPCOL2"),
-+ MTK_FUNCTION(5, "IO_JTAG_TMS"),
-+ MTK_FUNCTION(6, "I2S1_MCK"),
-+ MTK_FUNCTION(7, "DBG_MON_B0")
-+ ),
-+ MTK_PIN(
-+ 26, "GPIO26",
-+ MTK_EINT_FUNCTION(0, 26),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO26"),
-+ MTK_FUNCTION(1, "DBPI_VSYNC"),
-+ MTK_FUNCTION(2, "ANT_SEL1"),
-+ MTK_FUNCTION(3, "SDA6"),
-+ MTK_FUNCTION(4, "KPROW2"),
-+ MTK_FUNCTION(5, "IO_JTAG_TDI"),
-+ MTK_FUNCTION(6, "I2S1_BCK"),
-+ MTK_FUNCTION(7, "DBG_MON_B1")
-+ ),
-+ MTK_PIN(
-+ 27, "GPIO27",
-+ MTK_EINT_FUNCTION(0, 27),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO27"),
-+ MTK_FUNCTION(1, "DBPI_DE"),
-+ MTK_FUNCTION(2, "ANT_SEL2"),
-+ MTK_FUNCTION(3, "SCL7"),
-+ MTK_FUNCTION(4, "DMIC_CLK"),
-+ MTK_FUNCTION(5, "IO_JTAG_TDO"),
-+ MTK_FUNCTION(6, "I2S1_LRCK"),
-+ MTK_FUNCTION(7, "DBG_MON_B9")
-+ ),
-+ MTK_PIN(
-+ 28, "GPIO28",
-+ MTK_EINT_FUNCTION(0, 28),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO28"),
-+ MTK_FUNCTION(1, "DBPI_CK"),
-+ MTK_FUNCTION(2, "DVFSRC_EXT_REQ"),
-+ MTK_FUNCTION(3, "SDA7"),
-+ MTK_FUNCTION(4, "DMIC_DAT"),
-+ MTK_FUNCTION(5, "IO_JTAG_TRSTN"),
-+ MTK_FUNCTION(6, "I2S1_DO"),
-+ MTK_FUNCTION(7, "DBG_MON_B32")
-+ ),
-+ MTK_PIN(
-+ 29, "GPIO29",
-+ MTK_EINT_FUNCTION(0, 29),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO29"),
-+ MTK_FUNCTION(1, "MSDC1_CLK"),
-+ MTK_FUNCTION(2, "IO_JTAG_TCK"),
-+ MTK_FUNCTION(3, "UDI_TCK"),
-+ MTK_FUNCTION(4, "CONN_DSP_JCK"),
-+ MTK_FUNCTION(5, "SSPM_JTAG_TCK"),
-+ MTK_FUNCTION(6, "PCM1_CLK"),
-+ MTK_FUNCTION(7, "DBG_MON_A6")
-+ ),
-+ MTK_PIN(
-+ 30, "GPIO30",
-+ MTK_EINT_FUNCTION(0, 30),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO30"),
-+ MTK_FUNCTION(1, "MSDC1_DAT3"),
-+ MTK_FUNCTION(2, "DAP_MD32_SWD"),
-+ MTK_FUNCTION(3, "CONN_MCU_AICE_TMSC"),
-+ MTK_FUNCTION(4, "CONN_DSP_JINTP"),
-+ MTK_FUNCTION(5, "SSPM_JTAG_TRSTN"),
-+ MTK_FUNCTION(6, "PCM1_DI"),
-+ MTK_FUNCTION(7, "DBG_MON_A7")
-+ ),
-+ MTK_PIN(
-+ 31, "GPIO31",
-+ MTK_EINT_FUNCTION(0, 31),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO31"),
-+ MTK_FUNCTION(1, "MSDC1_CMD"),
-+ MTK_FUNCTION(2, "IO_JTAG_TMS"),
-+ MTK_FUNCTION(3, "UDI_TMS"),
-+ MTK_FUNCTION(4, "CONN_DSP_JMS"),
-+ MTK_FUNCTION(5, "SSPM_JTAG_TMS"),
-+ MTK_FUNCTION(6, "PCM1_SYNC"),
-+ MTK_FUNCTION(7, "DBG_MON_A8")
-+ ),
-+ MTK_PIN(
-+ 32, "GPIO32",
-+ MTK_EINT_FUNCTION(0, 32),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO32"),
-+ MTK_FUNCTION(1, "MSDC1_DAT0"),
-+ MTK_FUNCTION(2, "IO_JTAG_TDI"),
-+ MTK_FUNCTION(3, "UDI_TDI"),
-+ MTK_FUNCTION(4, "CONN_DSP_JDI"),
-+ MTK_FUNCTION(5, "SSPM_JTAG_TDI"),
-+ MTK_FUNCTION(6, "PCM1_DO0"),
-+ MTK_FUNCTION(7, "DBG_MON_A9")
-+ ),
-+ MTK_PIN(
-+ 33, "GPIO33",
-+ MTK_EINT_FUNCTION(0, 33),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO33"),
-+ MTK_FUNCTION(1, "MSDC1_DAT2"),
-+ MTK_FUNCTION(2, "IO_JTAG_TRSTN"),
-+ MTK_FUNCTION(3, "UDI_NTRST"),
-+ MTK_FUNCTION(4, "DAP_MD32_SWCK"),
-+ MTK_FUNCTION(5, "CONN_MCU_AICE_TCKC"),
-+ MTK_FUNCTION(6, "PCM1_DO2"),
-+ MTK_FUNCTION(7, "DBG_MON_A10")
-+ ),
-+ MTK_PIN(
-+ 34, "GPIO34",
-+ MTK_EINT_FUNCTION(0, 34),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO34"),
-+ MTK_FUNCTION(1, "MSDC1_DAT1"),
-+ MTK_FUNCTION(2, "IO_JTAG_TDO"),
-+ MTK_FUNCTION(3, "UDI_TDO"),
-+ MTK_FUNCTION(4, "CONN_DSP_JDO"),
-+ MTK_FUNCTION(5, "SSPM_JTAG_TDO"),
-+ MTK_FUNCTION(6, "PCM1_DO1"),
-+ MTK_FUNCTION(7, "DBG_MON_A11")
-+ ),
-+ MTK_PIN(
-+ 35, "GPIO35",
-+ MTK_EINT_FUNCTION(0, 35),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO35"),
-+ MTK_FUNCTION(1, "MD1_SIM2_SIO"),
-+ MTK_FUNCTION(2, "CCU_JTAG_TDO"),
-+ MTK_FUNCTION(3, "MD1_SIM1_SIO"),
-+ MTK_FUNCTION(5, "SCP_JTAG_TDO"),
-+ MTK_FUNCTION(6, "CONN_DSP_JMS"),
-+ MTK_FUNCTION(7, "DBG_MON_A28")
-+ ),
-+ MTK_PIN(
-+ 36, "GPIO36",
-+ MTK_EINT_FUNCTION(0, 36),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO36"),
-+ MTK_FUNCTION(1, "MD1_SIM2_SRST"),
-+ MTK_FUNCTION(2, "CCU_JTAG_TMS"),
-+ MTK_FUNCTION(3, "MD1_SIM1_SRST"),
-+ MTK_FUNCTION(4, "CONN_MCU_AICE_TMSC"),
-+ MTK_FUNCTION(5, "SCP_JTAG_TMS"),
-+ MTK_FUNCTION(6, "CONN_DSP_JINTP"),
-+ MTK_FUNCTION(7, "DBG_MON_A29")
-+ ),
-+ MTK_PIN(
-+ 37, "GPIO37",
-+ MTK_EINT_FUNCTION(0, 37),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO37"),
-+ MTK_FUNCTION(1, "MD1_SIM2_SCLK"),
-+ MTK_FUNCTION(2, "CCU_JTAG_TDI"),
-+ MTK_FUNCTION(3, "MD1_SIM1_SCLK"),
-+ MTK_FUNCTION(5, "SCP_JTAG_TDI"),
-+ MTK_FUNCTION(6, "CONN_DSP_JDO"),
-+ MTK_FUNCTION(7, "DBG_MON_A30")
-+ ),
-+ MTK_PIN(
-+ 38, "GPIO38",
-+ MTK_EINT_FUNCTION(0, 38),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO38"),
-+ MTK_FUNCTION(1, "MD1_SIM1_SCLK"),
-+ MTK_FUNCTION(3, "MD1_SIM2_SCLK"),
-+ MTK_FUNCTION(4, "CONN_MCU_AICE_TCKC"),
-+ MTK_FUNCTION(7, "DBG_MON_A20")
-+ ),
-+ MTK_PIN(
-+ 39, "GPIO39",
-+ MTK_EINT_FUNCTION(0, 39),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO39"),
-+ MTK_FUNCTION(1, "MD1_SIM1_SRST"),
-+ MTK_FUNCTION(2, "CCU_JTAG_TCK"),
-+ MTK_FUNCTION(3, "MD1_SIM2_SRST"),
-+ MTK_FUNCTION(5, "SCP_JTAG_TCK"),
-+ MTK_FUNCTION(6, "CONN_DSP_JCK"),
-+ MTK_FUNCTION(7, "DBG_MON_A31")
-+ ),
-+ MTK_PIN(
-+ 40, "GPIO40",
-+ MTK_EINT_FUNCTION(0, 40),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO40"),
-+ MTK_FUNCTION(1, "MD1_SIM1_SIO"),
-+ MTK_FUNCTION(2, "CCU_JTAG_TRST"),
-+ MTK_FUNCTION(3, "MD1_SIM2_SIO"),
-+ MTK_FUNCTION(5, "SCP_JTAG_TRSTN"),
-+ MTK_FUNCTION(6, "CONN_DSP_JDI"),
-+ MTK_FUNCTION(7, "DBG_MON_A32")
-+ ),
-+ MTK_PIN(
-+ 41, "GPIO41",
-+ MTK_EINT_FUNCTION(0, 41),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO41"),
-+ MTK_FUNCTION(1, "IDDIG"),
-+ MTK_FUNCTION(2, "URXD1"),
-+ MTK_FUNCTION(3, "UCTS0"),
-+ MTK_FUNCTION(4, "SSPM_UTXD_AO"),
-+ MTK_FUNCTION(5, "EXT_FRAME_SYNC"),
-+ MTK_FUNCTION(6, "DMIC_CLK")
-+ ),
-+ MTK_PIN(
-+ 42, "GPIO42",
-+ MTK_EINT_FUNCTION(0, 42),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO42"),
-+ MTK_FUNCTION(1, "USB_DRVVBUS"),
-+ MTK_FUNCTION(2, "UTXD1"),
-+ MTK_FUNCTION(3, "URTS0"),
-+ MTK_FUNCTION(4, "SSPM_URXD_AO"),
-+ MTK_FUNCTION(5, "EXT_FRAME_SYNC"),
-+ MTK_FUNCTION(6, "DMIC_DAT")
-+ ),
-+ MTK_PIN(
-+ 43, "GPIO43",
-+ MTK_EINT_FUNCTION(0, 43),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO43"),
-+ MTK_FUNCTION(1, "DISP_PWM")
-+ ),
-+ MTK_PIN(
-+ 44, "GPIO44",
-+ MTK_EINT_FUNCTION(0, 44),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO44"),
-+ MTK_FUNCTION(1, "DSI_TE")
-+ ),
-+ MTK_PIN(
-+ 45, "GPIO45",
-+ MTK_EINT_FUNCTION(0, 45),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO45"),
-+ MTK_FUNCTION(1, "LCM_RST")
-+ ),
-+ MTK_PIN(
-+ 46, "GPIO46",
-+ MTK_EINT_FUNCTION(0, 46),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO46"),
-+ MTK_FUNCTION(1, "MD_INT2_C2K_UIM1_HOT_PLUG"),
-+ MTK_FUNCTION(2, "URXD1"),
-+ MTK_FUNCTION(3, "UCTS1"),
-+ MTK_FUNCTION(4, "CCU_UTXD_AO"),
-+ MTK_FUNCTION(5, "TP_UCTS1_AO"),
-+ MTK_FUNCTION(6, "IDDIG"),
-+ MTK_FUNCTION(7, "I2S5_LRCK")
-+ ),
-+ MTK_PIN(
-+ 47, "GPIO47",
-+ MTK_EINT_FUNCTION(0, 47),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO47"),
-+ MTK_FUNCTION(1, "MD_INT1_C2K_UIM0_HOT_PLUG"),
-+ MTK_FUNCTION(2, "UTXD1"),
-+ MTK_FUNCTION(3, "URTS1"),
-+ MTK_FUNCTION(4, "CCU_URXD_AO"),
-+ MTK_FUNCTION(5, "TP_URTS1_AO"),
-+ MTK_FUNCTION(6, "USB_DRVVBUS"),
-+ MTK_FUNCTION(7, "I2S5_DO")
-+ ),
-+ MTK_PIN(
-+ 48, "GPIO48",
-+ MTK_EINT_FUNCTION(0, 48),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO48"),
-+ MTK_FUNCTION(1, "SCL5")
-+ ),
-+ MTK_PIN(
-+ 49, "GPIO49",
-+ MTK_EINT_FUNCTION(0, 49),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO49"),
-+ MTK_FUNCTION(1, "SDA5")
-+ ),
-+ MTK_PIN(
-+ 50, "GPIO50",
-+ MTK_EINT_FUNCTION(0, 50),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO50"),
-+ MTK_FUNCTION(1, "SCL3")
-+ ),
-+ MTK_PIN(
-+ 51, "GPIO51",
-+ MTK_EINT_FUNCTION(0, 51),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO51"),
-+ MTK_FUNCTION(1, "SDA3")
-+ ),
-+ MTK_PIN(
-+ 52, "GPIO52",
-+ MTK_EINT_FUNCTION(0, 52),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO52"),
-+ MTK_FUNCTION(1, "BPI_ANT2")
-+ ),
-+ MTK_PIN(
-+ 53, "GPIO53",
-+ MTK_EINT_FUNCTION(0, 53),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO53"),
-+ MTK_FUNCTION(1, "BPI_ANT0")
-+ ),
-+ MTK_PIN(
-+ 54, "GPIO54",
-+ MTK_EINT_FUNCTION(0, 54),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO54"),
-+ MTK_FUNCTION(1, "BPI_OLAT1")
-+ ),
-+ MTK_PIN(
-+ 55, "GPIO55",
-+ MTK_EINT_FUNCTION(0, 55),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO55"),
-+ MTK_FUNCTION(1, "BPI_BUS8")
-+ ),
-+ MTK_PIN(
-+ 56, "GPIO56",
-+ MTK_EINT_FUNCTION(0, 56),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO56"),
-+ MTK_FUNCTION(1, "BPI_BUS9"),
-+ MTK_FUNCTION(2, "SCL_6306")
-+ ),
-+ MTK_PIN(
-+ 57, "GPIO57",
-+ MTK_EINT_FUNCTION(0, 57),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO57"),
-+ MTK_FUNCTION(1, "BPI_BUS10"),
-+ MTK_FUNCTION(2, "SDA_6306")
-+ ),
-+ MTK_PIN(
-+ 58, "GPIO58",
-+ MTK_EINT_FUNCTION(0, 58),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO58"),
-+ MTK_FUNCTION(1, "RFIC0_BSI_D2"),
-+ MTK_FUNCTION(2, "SPM_BSI_D2"),
-+ MTK_FUNCTION(3, "PWM_B")
-+ ),
-+ MTK_PIN(
-+ 59, "GPIO59",
-+ MTK_EINT_FUNCTION(0, 59),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO59"),
-+ MTK_FUNCTION(1, "RFIC0_BSI_D1"),
-+ MTK_FUNCTION(2, "SPM_BSI_D1")
-+ ),
-+ MTK_PIN(
-+ 60, "GPIO60",
-+ MTK_EINT_FUNCTION(0, 60),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO60"),
-+ MTK_FUNCTION(1, "RFIC0_BSI_D0"),
-+ MTK_FUNCTION(2, "SPM_BSI_D0")
-+ ),
-+ MTK_PIN(
-+ 61, "GPIO61",
-+ MTK_EINT_FUNCTION(0, 61),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO61"),
-+ MTK_FUNCTION(1, "MIPI1_SDATA")
-+ ),
-+ MTK_PIN(
-+ 62, "GPIO62",
-+ MTK_EINT_FUNCTION(0, 62),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO62"),
-+ MTK_FUNCTION(1, "MIPI1_SCLK")
-+ ),
-+ MTK_PIN(
-+ 63, "GPIO63",
-+ MTK_EINT_FUNCTION(0, 63),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO63"),
-+ MTK_FUNCTION(1, "MIPI0_SDATA")
-+ ),
-+ MTK_PIN(
-+ 64, "GPIO64",
-+ MTK_EINT_FUNCTION(0, 64),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO64"),
-+ MTK_FUNCTION(1, "MIPI0_SCLK")
-+ ),
-+ MTK_PIN(
-+ 65, "GPIO65",
-+ MTK_EINT_FUNCTION(0, 65),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO65"),
-+ MTK_FUNCTION(1, "MIPI3_SDATA"),
-+ MTK_FUNCTION(2, "BPI_OLAT2")
-+ ),
-+ MTK_PIN(
-+ 66, "GPIO66",
-+ MTK_EINT_FUNCTION(0, 66),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO66"),
-+ MTK_FUNCTION(1, "MIPI3_SCLK"),
-+ MTK_FUNCTION(2, "BPI_OLAT3")
-+ ),
-+ MTK_PIN(
-+ 67, "GPIO67",
-+ MTK_EINT_FUNCTION(0, 67),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO67"),
-+ MTK_FUNCTION(1, "MIPI2_SDATA")
-+ ),
-+ MTK_PIN(
-+ 68, "GPIO68",
-+ MTK_EINT_FUNCTION(0, 68),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO68"),
-+ MTK_FUNCTION(1, "MIPI2_SCLK")
-+ ),
-+ MTK_PIN(
-+ 69, "GPIO69",
-+ MTK_EINT_FUNCTION(0, 69),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO69"),
-+ MTK_FUNCTION(1, "BPI_BUS7")
-+ ),
-+ MTK_PIN(
-+ 70, "GPIO70",
-+ MTK_EINT_FUNCTION(0, 70),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO70"),
-+ MTK_FUNCTION(1, "BPI_BUS6")
-+ ),
-+ MTK_PIN(
-+ 71, "GPIO71",
-+ MTK_EINT_FUNCTION(0, 71),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO71"),
-+ MTK_FUNCTION(1, "BPI_BUS5")
-+ ),
-+ MTK_PIN(
-+ 72, "GPIO72",
-+ MTK_EINT_FUNCTION(0, 72),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO72"),
-+ MTK_FUNCTION(1, "BPI_BUS4")
-+ ),
-+ MTK_PIN(
-+ 73, "GPIO73",
-+ MTK_EINT_FUNCTION(0, 73),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO73"),
-+ MTK_FUNCTION(1, "BPI_BUS3")
-+ ),
-+ MTK_PIN(
-+ 74, "GPIO74",
-+ MTK_EINT_FUNCTION(0, 74),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO74"),
-+ MTK_FUNCTION(1, "BPI_BUS2")
-+ ),
-+ MTK_PIN(
-+ 75, "GPIO75",
-+ MTK_EINT_FUNCTION(0, 75),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO75"),
-+ MTK_FUNCTION(1, "BPI_BUS1")
-+ ),
-+ MTK_PIN(
-+ 76, "GPIO76",
-+ MTK_EINT_FUNCTION(0, 76),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO76"),
-+ MTK_FUNCTION(1, "BPI_BUS0")
-+ ),
-+ MTK_PIN(
-+ 77, "GPIO77",
-+ MTK_EINT_FUNCTION(0, 77),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO77"),
-+ MTK_FUNCTION(1, "BPI_ANT1")
-+ ),
-+ MTK_PIN(
-+ 78, "GPIO78",
-+ MTK_EINT_FUNCTION(0, 78),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO78"),
-+ MTK_FUNCTION(1, "BPI_OLAT0")
-+ ),
-+ MTK_PIN(
-+ 79, "GPIO79",
-+ MTK_EINT_FUNCTION(0, 79),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO79"),
-+ MTK_FUNCTION(1, "BPI_PA_VM1"),
-+ MTK_FUNCTION(2, "MIPI4_SDATA")
-+ ),
-+ MTK_PIN(
-+ 80, "GPIO80",
-+ MTK_EINT_FUNCTION(0, 80),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO80"),
-+ MTK_FUNCTION(1, "BPI_PA_VM0"),
-+ MTK_FUNCTION(2, "MIPI4_SCLK")
-+ ),
-+ MTK_PIN(
-+ 81, "GPIO81",
-+ MTK_EINT_FUNCTION(0, 81),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO81"),
-+ MTK_FUNCTION(1, "SDA1")
-+ ),
-+ MTK_PIN(
-+ 82, "GPIO82",
-+ MTK_EINT_FUNCTION(0, 82),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO82"),
-+ MTK_FUNCTION(1, "SDA0")
-+ ),
-+ MTK_PIN(
-+ 83, "GPIO83",
-+ MTK_EINT_FUNCTION(0, 83),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO83"),
-+ MTK_FUNCTION(1, "SCL0")
-+ ),
-+ MTK_PIN(
-+ 84, "GPIO84",
-+ MTK_EINT_FUNCTION(0, 84),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO84"),
-+ MTK_FUNCTION(1, "SCL1")
-+ ),
-+ MTK_PIN(
-+ 85, "GPIO85",
-+ MTK_EINT_FUNCTION(0, 85),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO85"),
-+ MTK_FUNCTION(1, "SPI0_MI"),
-+ MTK_FUNCTION(2, "SCP_SPI0_MI"),
-+ MTK_FUNCTION(3, "CLKM3"),
-+ MTK_FUNCTION(4, "I2S1_BCK"),
-+ MTK_FUNCTION(5, "MFG_DFD_JTAG_TDO"),
-+ MTK_FUNCTION(6, "DFD_TDO"),
-+ MTK_FUNCTION(7, "JTDO_SEL1")
-+ ),
-+ MTK_PIN(
-+ 86, "GPIO86",
-+ MTK_EINT_FUNCTION(0, 86),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO86"),
-+ MTK_FUNCTION(1, "SPI0_CSB"),
-+ MTK_FUNCTION(2, "SCP_SPI0_CS"),
-+ MTK_FUNCTION(3, "CLKM0"),
-+ MTK_FUNCTION(4, "I2S1_LRCK"),
-+ MTK_FUNCTION(5, "MFG_DFD_JTAG_TMS"),
-+ MTK_FUNCTION(6, "DFD_TMS"),
-+ MTK_FUNCTION(7, "JTMS_SEL1")
-+ ),
-+ MTK_PIN(
-+ 87, "GPIO87",
-+ MTK_EINT_FUNCTION(0, 87),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO87"),
-+ MTK_FUNCTION(1, "SPI0_MO"),
-+ MTK_FUNCTION(2, "SCP_SPI0_MO"),
-+ MTK_FUNCTION(3, "SDA1"),
-+ MTK_FUNCTION(4, "I2S1_DO"),
-+ MTK_FUNCTION(5, "MFG_DFD_JTAG_TDI"),
-+ MTK_FUNCTION(6, "DFD_TDI"),
-+ MTK_FUNCTION(7, "JTDI_SEL1")
-+ ),
-+ MTK_PIN(
-+ 88, "GPIO88",
-+ MTK_EINT_FUNCTION(0, 88),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO88"),
-+ MTK_FUNCTION(1, "SPI0_CLK"),
-+ MTK_FUNCTION(2, "SCP_SPI0_CK"),
-+ MTK_FUNCTION(3, "SCL1"),
-+ MTK_FUNCTION(4, "I2S1_MCK"),
-+ MTK_FUNCTION(5, "MFG_DFD_JTAG_TCK"),
-+ MTK_FUNCTION(6, "DFD_TCK_XI"),
-+ MTK_FUNCTION(7, "JTCK_SEL1")
-+ ),
-+ MTK_PIN(
-+ 89, "GPIO89",
-+ MTK_EINT_FUNCTION(0, 89),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO89"),
-+ MTK_FUNCTION(1, "SRCLKENAI0"),
-+ MTK_FUNCTION(2, "PWM_C"),
-+ MTK_FUNCTION(3, "I2S5_BCK"),
-+ MTK_FUNCTION(4, "ANT_SEL6"),
-+ MTK_FUNCTION(5, "SDA8"),
-+ MTK_FUNCTION(6, "CMVREF0"),
-+ MTK_FUNCTION(7, "DBG_MON_A21")
-+ ),
-+ MTK_PIN(
-+ 90, "GPIO90",
-+ MTK_EINT_FUNCTION(0, 90),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO90"),
-+ MTK_FUNCTION(1, "PWM_A"),
-+ MTK_FUNCTION(2, "CMMCLK2"),
-+ MTK_FUNCTION(3, "I2S5_LRCK"),
-+ MTK_FUNCTION(4, "SCP_VREQ_VAO"),
-+ MTK_FUNCTION(5, "SCL8"),
-+ MTK_FUNCTION(6, "PTA_RXD"),
-+ MTK_FUNCTION(7, "DBG_MON_A22")
-+ ),
-+ MTK_PIN(
-+ 91, "GPIO91",
-+ MTK_EINT_FUNCTION(0, 91),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO91"),
-+ MTK_FUNCTION(1, "KPROW1"),
-+ MTK_FUNCTION(2, "PWM_B"),
-+ MTK_FUNCTION(3, "I2S5_DO"),
-+ MTK_FUNCTION(4, "ANT_SEL7"),
-+ MTK_FUNCTION(5, "CMMCLK3"),
-+ MTK_FUNCTION(6, "PTA_TXD")
-+ ),
-+ MTK_PIN(
-+ 92, "GPIO92",
-+ MTK_EINT_FUNCTION(0, 92),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO92"),
-+ MTK_FUNCTION(1, "KPROW0")
-+ ),
-+ MTK_PIN(
-+ 93, "GPIO93",
-+ MTK_EINT_FUNCTION(0, 93),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO93"),
-+ MTK_FUNCTION(1, "KPCOL0"),
-+ MTK_FUNCTION(7, "DBG_MON_B27")
-+ ),
-+ MTK_PIN(
-+ 94, "GPIO94",
-+ MTK_EINT_FUNCTION(0, 94),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO94"),
-+ MTK_FUNCTION(1, "KPCOL1"),
-+ MTK_FUNCTION(2, "I2S2_DI2"),
-+ MTK_FUNCTION(3, "I2S5_MCK"),
-+ MTK_FUNCTION(4, "CMMCLK2"),
-+ MTK_FUNCTION(5, "SCP_SPI2_MI"),
-+ MTK_FUNCTION(6, "SRCLKENAI1"),
-+ MTK_FUNCTION(7, "SPI2_MI")
-+ ),
-+ MTK_PIN(
-+ 95, "GPIO95",
-+ MTK_EINT_FUNCTION(0, 95),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO95"),
-+ MTK_FUNCTION(1, "URXD0"),
-+ MTK_FUNCTION(2, "UTXD0"),
-+ MTK_FUNCTION(3, "MD_URXD0"),
-+ MTK_FUNCTION(4, "MD_URXD1"),
-+ MTK_FUNCTION(5, "SSPM_URXD_AO"),
-+ MTK_FUNCTION(6, "CCU_URXD_AO")
-+ ),
-+ MTK_PIN(
-+ 96, "GPIO96",
-+ MTK_EINT_FUNCTION(0, 96),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO96"),
-+ MTK_FUNCTION(1, "UTXD0"),
-+ MTK_FUNCTION(2, "URXD0"),
-+ MTK_FUNCTION(3, "MD_UTXD0"),
-+ MTK_FUNCTION(4, "MD_UTXD1"),
-+ MTK_FUNCTION(5, "SSPM_UTXD_AO"),
-+ MTK_FUNCTION(6, "CCU_UTXD_AO"),
-+ MTK_FUNCTION(7, "DBG_MON_B2")
-+ ),
-+ MTK_PIN(
-+ 97, "GPIO97",
-+ MTK_EINT_FUNCTION(0, 97),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO97"),
-+ MTK_FUNCTION(1, "UCTS0"),
-+ MTK_FUNCTION(2, "I2S2_MCK"),
-+ MTK_FUNCTION(3, "IDDIG"),
-+ MTK_FUNCTION(4, "CONN_MCU_TDO"),
-+ MTK_FUNCTION(5, "SSPM_JTAG_TDO"),
-+ MTK_FUNCTION(6, "IO_JTAG_TDO"),
-+ MTK_FUNCTION(7, "DBG_MON_B3")
-+ ),
-+ MTK_PIN(
-+ 98, "GPIO98",
-+ MTK_EINT_FUNCTION(0, 98),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO98"),
-+ MTK_FUNCTION(1, "URTS0"),
-+ MTK_FUNCTION(2, "I2S2_BCK"),
-+ MTK_FUNCTION(3, "USB_DRVVBUS"),
-+ MTK_FUNCTION(4, "CONN_MCU_TMS"),
-+ MTK_FUNCTION(5, "SSPM_JTAG_TMS"),
-+ MTK_FUNCTION(6, "IO_JTAG_TMS"),
-+ MTK_FUNCTION(7, "DBG_MON_B4")
-+ ),
-+ MTK_PIN(
-+ 99, "GPIO99",
-+ MTK_EINT_FUNCTION(0, 99),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO99"),
-+ MTK_FUNCTION(1, "CMMCLK0"),
-+ MTK_FUNCTION(4, "CONN_MCU_AICE_TMSC"),
-+ MTK_FUNCTION(7, "DBG_MON_B28")
-+ ),
-+ MTK_PIN(
-+ 100, "GPIO100",
-+ MTK_EINT_FUNCTION(0, 100),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO100"),
-+ MTK_FUNCTION(1, "CMMCLK1"),
-+ MTK_FUNCTION(2, "PWM_C"),
-+ MTK_FUNCTION(3, "MD_INT1_C2K_UIM0_HOT_PLUG"),
-+ MTK_FUNCTION(4, "CONN_MCU_AICE_TCKC"),
-+ MTK_FUNCTION(7, "DBG_MON_B29")
-+ ),
-+ MTK_PIN(
-+ 101, "GPIO101",
-+ MTK_EINT_FUNCTION(0, 101),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO101"),
-+ MTK_FUNCTION(1, "CLKM2"),
-+ MTK_FUNCTION(2, "I2S2_LRCK"),
-+ MTK_FUNCTION(3, "CMVREF1"),
-+ MTK_FUNCTION(4, "CONN_MCU_TCK"),
-+ MTK_FUNCTION(5, "SSPM_JTAG_TCK"),
-+ MTK_FUNCTION(6, "IO_JTAG_TCK")
-+ ),
-+ MTK_PIN(
-+ 102, "GPIO102",
-+ MTK_EINT_FUNCTION(0, 102),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO102"),
-+ MTK_FUNCTION(1, "CLKM1"),
-+ MTK_FUNCTION(2, "I2S2_DI"),
-+ MTK_FUNCTION(3, "DVFSRC_EXT_REQ"),
-+ MTK_FUNCTION(4, "CONN_MCU_TDI"),
-+ MTK_FUNCTION(5, "SSPM_JTAG_TDI"),
-+ MTK_FUNCTION(6, "IO_JTAG_TDI"),
-+ MTK_FUNCTION(7, "DBG_MON_B8")
-+ ),
-+ MTK_PIN(
-+ 103, "GPIO103",
-+ MTK_EINT_FUNCTION(0, 103),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO103"),
-+ MTK_FUNCTION(1, "SCL2")
-+ ),
-+ MTK_PIN(
-+ 104, "GPIO104",
-+ MTK_EINT_FUNCTION(0, 104),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO104"),
-+ MTK_FUNCTION(1, "SDA2")
-+ ),
-+ MTK_PIN(
-+ 105, "GPIO105",
-+ MTK_EINT_FUNCTION(0, 105),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO105"),
-+ MTK_FUNCTION(1, "SCL4")
-+ ),
-+ MTK_PIN(
-+ 106, "GPIO106",
-+ MTK_EINT_FUNCTION(0, 106),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO106"),
-+ MTK_FUNCTION(1, "SDA4")
-+ ),
-+ MTK_PIN(
-+ 107, "GPIO107",
-+ MTK_EINT_FUNCTION(0, 107),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO107"),
-+ MTK_FUNCTION(1, "DMIC_CLK"),
-+ MTK_FUNCTION(2, "ANT_SEL0"),
-+ MTK_FUNCTION(3, "CLKM0"),
-+ MTK_FUNCTION(4, "SDA7"),
-+ MTK_FUNCTION(5, "EXT_FRAME_SYNC"),
-+ MTK_FUNCTION(6, "PWM_A"),
-+ MTK_FUNCTION(7, "DBG_MON_B12")
-+ ),
-+ MTK_PIN(
-+ 108, "GPIO108",
-+ MTK_EINT_FUNCTION(0, 108),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO108"),
-+ MTK_FUNCTION(1, "CMMCLK2"),
-+ MTK_FUNCTION(2, "ANT_SEL1"),
-+ MTK_FUNCTION(3, "CLKM1"),
-+ MTK_FUNCTION(4, "SCL8"),
-+ MTK_FUNCTION(5, "DAP_MD32_SWD"),
-+ MTK_FUNCTION(6, "PWM_B"),
-+ MTK_FUNCTION(7, "DBG_MON_B13")
-+ ),
-+ MTK_PIN(
-+ 109, "GPIO109",
-+ MTK_EINT_FUNCTION(0, 109),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO109"),
-+ MTK_FUNCTION(1, "DMIC_DAT"),
-+ MTK_FUNCTION(2, "ANT_SEL2"),
-+ MTK_FUNCTION(3, "CLKM2"),
-+ MTK_FUNCTION(4, "SDA8"),
-+ MTK_FUNCTION(5, "DAP_MD32_SWCK"),
-+ MTK_FUNCTION(6, "PWM_C"),
-+ MTK_FUNCTION(7, "DBG_MON_B14")
-+ ),
-+ MTK_PIN(
-+ 110, "GPIO110",
-+ MTK_EINT_FUNCTION(0, 110),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO110"),
-+ MTK_FUNCTION(1, "SCL7"),
-+ MTK_FUNCTION(2, "ANT_SEL0"),
-+ MTK_FUNCTION(3, "TP_URXD1_AO"),
-+ MTK_FUNCTION(4, "USB_DRVVBUS"),
-+ MTK_FUNCTION(5, "SRCLKENAI1"),
-+ MTK_FUNCTION(6, "KPCOL2"),
-+ MTK_FUNCTION(7, "URXD1")
-+ ),
-+ MTK_PIN(
-+ 111, "GPIO111",
-+ MTK_EINT_FUNCTION(0, 111),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO111"),
-+ MTK_FUNCTION(1, "CMMCLK3"),
-+ MTK_FUNCTION(2, "ANT_SEL1"),
-+ MTK_FUNCTION(3, "SRCLKENAI0"),
-+ MTK_FUNCTION(4, "SCP_VREQ_VAO"),
-+ MTK_FUNCTION(5, "MD_INT2_C2K_UIM1_HOT_PLUG"),
-+ MTK_FUNCTION(7, "DVFSRC_EXT_REQ")
-+ ),
-+ MTK_PIN(
-+ 112, "GPIO112",
-+ MTK_EINT_FUNCTION(0, 112),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO112"),
-+ MTK_FUNCTION(1, "SDA7"),
-+ MTK_FUNCTION(2, "ANT_SEL2"),
-+ MTK_FUNCTION(3, "TP_UTXD1_AO"),
-+ MTK_FUNCTION(4, "IDDIG"),
-+ MTK_FUNCTION(5, "AGPS_SYNC"),
-+ MTK_FUNCTION(6, "KPROW2"),
-+ MTK_FUNCTION(7, "UTXD1")
-+ ),
-+ MTK_PIN(
-+ 113, "GPIO113",
-+ MTK_EINT_FUNCTION(0, 113),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO113"),
-+ MTK_FUNCTION(1, "CONN_TOP_CLK"),
-+ MTK_FUNCTION(3, "SCL6"),
-+ MTK_FUNCTION(4, "AUXIF_CLK0"),
-+ MTK_FUNCTION(6, "TP_UCTS1_AO")
-+ ),
-+ MTK_PIN(
-+ 114, "GPIO114",
-+ MTK_EINT_FUNCTION(0, 114),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO114"),
-+ MTK_FUNCTION(1, "CONN_TOP_DATA"),
-+ MTK_FUNCTION(3, "SDA6"),
-+ MTK_FUNCTION(4, "AUXIF_ST0"),
-+ MTK_FUNCTION(6, "TP_URTS1_AO")
-+ ),
-+ MTK_PIN(
-+ 115, "GPIO115",
-+ MTK_EINT_FUNCTION(0, 115),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO115"),
-+ MTK_FUNCTION(1, "CONN_BT_CLK"),
-+ MTK_FUNCTION(2, "UTXD1"),
-+ MTK_FUNCTION(3, "PTA_TXD"),
-+ MTK_FUNCTION(4, "AUXIF_CLK1"),
-+ MTK_FUNCTION(5, "DAP_MD32_SWD"),
-+ MTK_FUNCTION(6, "TP_UTXD1_AO")
-+ ),
-+ MTK_PIN(
-+ 116, "GPIO116",
-+ MTK_EINT_FUNCTION(0, 116),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO116"),
-+ MTK_FUNCTION(1, "CONN_BT_DATA"),
-+ MTK_FUNCTION(2, "IPU_JTAG_TRST"),
-+ MTK_FUNCTION(4, "AUXIF_ST1"),
-+ MTK_FUNCTION(5, "DAP_MD32_SWCK"),
-+ MTK_FUNCTION(6, "TP_URXD2_AO"),
-+ MTK_FUNCTION(7, "DBG_MON_A0")
-+ ),
-+ MTK_PIN(
-+ 117, "GPIO117",
-+ MTK_EINT_FUNCTION(0, 117),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO117"),
-+ MTK_FUNCTION(1, "CONN_WF_HB0"),
-+ MTK_FUNCTION(2, "IPU_JTAG_TDO"),
-+ MTK_FUNCTION(6, "TP_UTXD2_AO"),
-+ MTK_FUNCTION(7, "DBG_MON_A4")
-+ ),
-+ MTK_PIN(
-+ 118, "GPIO118",
-+ MTK_EINT_FUNCTION(0, 118),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO118"),
-+ MTK_FUNCTION(1, "CONN_WF_HB1"),
-+ MTK_FUNCTION(2, "IPU_JTAG_TDI"),
-+ MTK_FUNCTION(5, "SSPM_URXD_AO"),
-+ MTK_FUNCTION(6, "TP_UCTS2_AO"),
-+ MTK_FUNCTION(7, "DBG_MON_A5")
-+ ),
-+ MTK_PIN(
-+ 119, "GPIO119",
-+ MTK_EINT_FUNCTION(0, 119),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO119"),
-+ MTK_FUNCTION(1, "CONN_WF_HB2"),
-+ MTK_FUNCTION(2, "IPU_JTAG_TCK"),
-+ MTK_FUNCTION(5, "SSPM_UTXD_AO"),
-+ MTK_FUNCTION(6, "TP_URTS2_AO")
-+ ),
-+ MTK_PIN(
-+ 120, "GPIO120",
-+ MTK_EINT_FUNCTION(0, 120),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO120"),
-+ MTK_FUNCTION(1, "CONN_WB_PTA"),
-+ MTK_FUNCTION(2, "IPU_JTAG_TMS"),
-+ MTK_FUNCTION(5, "CCU_URXD_AO")
-+ ),
-+ MTK_PIN(
-+ 121, "GPIO121",
-+ MTK_EINT_FUNCTION(0, 121),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO121"),
-+ MTK_FUNCTION(1, "CONN_HRST_B"),
-+ MTK_FUNCTION(2, "URXD1"),
-+ MTK_FUNCTION(3, "PTA_RXD"),
-+ MTK_FUNCTION(5, "CCU_UTXD_AO"),
-+ MTK_FUNCTION(6, "TP_URXD1_AO")
-+ ),
-+ MTK_PIN(
-+ 122, "GPIO122",
-+ MTK_EINT_FUNCTION(0, 122),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO122"),
-+ MTK_FUNCTION(1, "MSDC0_CMD"),
-+ MTK_FUNCTION(2, "SSPM_URXD2_AO"),
-+ MTK_FUNCTION(3, "ANT_SEL1"),
-+ MTK_FUNCTION(7, "DBG_MON_A12")
-+ ),
-+ MTK_PIN(
-+ 123, "GPIO123",
-+ MTK_EINT_FUNCTION(0, 123),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO123"),
-+ MTK_FUNCTION(1, "MSDC0_DAT0"),
-+ MTK_FUNCTION(3, "ANT_SEL0"),
-+ MTK_FUNCTION(7, "DBG_MON_A13")
-+ ),
-+ MTK_PIN(
-+ 124, "GPIO124",
-+ MTK_EINT_FUNCTION(0, 124),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO124"),
-+ MTK_FUNCTION(1, "MSDC0_CLK"),
-+ MTK_FUNCTION(7, "DBG_MON_A14")
-+ ),
-+ MTK_PIN(
-+ 125, "GPIO125",
-+ MTK_EINT_FUNCTION(0, 125),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO125"),
-+ MTK_FUNCTION(1, "MSDC0_DAT2"),
-+ MTK_FUNCTION(3, "MRG_CLK"),
-+ MTK_FUNCTION(7, "DBG_MON_A15")
-+ ),
-+ MTK_PIN(
-+ 126, "GPIO126",
-+ MTK_EINT_FUNCTION(0, 126),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO126"),
-+ MTK_FUNCTION(1, "MSDC0_DAT4"),
-+ MTK_FUNCTION(3, "ANT_SEL5"),
-+ MTK_FUNCTION(6, "UFS_MPHY_SCL"),
-+ MTK_FUNCTION(7, "DBG_MON_A16")
-+ ),
-+ MTK_PIN(
-+ 127, "GPIO127",
-+ MTK_EINT_FUNCTION(0, 127),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO127"),
-+ MTK_FUNCTION(1, "MSDC0_DAT6"),
-+ MTK_FUNCTION(3, "ANT_SEL4"),
-+ MTK_FUNCTION(6, "UFS_MPHY_SDA"),
-+ MTK_FUNCTION(7, "DBG_MON_A17")
-+ ),
-+ MTK_PIN(
-+ 128, "GPIO128",
-+ MTK_EINT_FUNCTION(0, 128),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO128"),
-+ MTK_FUNCTION(1, "MSDC0_DAT1"),
-+ MTK_FUNCTION(3, "ANT_SEL2"),
-+ MTK_FUNCTION(6, "UFS_UNIPRO_SDA"),
-+ MTK_FUNCTION(7, "DBG_MON_A18")
-+ ),
-+ MTK_PIN(
-+ 129, "GPIO129",
-+ MTK_EINT_FUNCTION(0, 129),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO129"),
-+ MTK_FUNCTION(1, "MSDC0_DAT5"),
-+ MTK_FUNCTION(3, "ANT_SEL3"),
-+ MTK_FUNCTION(6, "UFS_UNIPRO_SCL"),
-+ MTK_FUNCTION(7, "DBG_MON_A23")
-+ ),
-+ MTK_PIN(
-+ 130, "GPIO130",
-+ MTK_EINT_FUNCTION(0, 130),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO130"),
-+ MTK_FUNCTION(1, "MSDC0_DAT7"),
-+ MTK_FUNCTION(3, "MRG_DO"),
-+ MTK_FUNCTION(7, "DBG_MON_A24")
-+ ),
-+ MTK_PIN(
-+ 131, "GPIO131",
-+ MTK_EINT_FUNCTION(0, 131),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO131"),
-+ MTK_FUNCTION(1, "MSDC0_DSL"),
-+ MTK_FUNCTION(3, "MRG_SYNC"),
-+ MTK_FUNCTION(7, "DBG_MON_A25")
-+ ),
-+ MTK_PIN(
-+ 132, "GPIO132",
-+ MTK_EINT_FUNCTION(0, 132),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO132"),
-+ MTK_FUNCTION(1, "MSDC0_DAT3"),
-+ MTK_FUNCTION(3, "MRG_DI"),
-+ MTK_FUNCTION(7, "DBG_MON_A26")
-+ ),
-+ MTK_PIN(
-+ 133, "GPIO133",
-+ MTK_EINT_FUNCTION(0, 133),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO133"),
-+ MTK_FUNCTION(1, "MSDC0_RSTB"),
-+ MTK_FUNCTION(3, "AGPS_SYNC"),
-+ MTK_FUNCTION(7, "DBG_MON_A27")
-+ ),
-+ MTK_PIN(
-+ 134, "GPIO134",
-+ MTK_EINT_FUNCTION(0, 134),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO134"),
-+ MTK_FUNCTION(1, "RTC32K_CK")
-+ ),
-+ MTK_PIN(
-+ 135, "GPIO135",
-+ MTK_EINT_FUNCTION(0, 135),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO135"),
-+ MTK_FUNCTION(1, "WATCHDOG")
-+ ),
-+ MTK_PIN(
-+ 136, "GPIO136",
-+ MTK_EINT_FUNCTION(0, 136),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO136"),
-+ MTK_FUNCTION(1, "AUD_CLK_MOSI"),
-+ MTK_FUNCTION(2, "AUD_CLK_MISO"),
-+ MTK_FUNCTION(3, "I2S1_MCK"),
-+ MTK_FUNCTION(6, "UFS_UNIPRO_SCL")
-+ ),
-+ MTK_PIN(
-+ 137, "GPIO137",
-+ MTK_EINT_FUNCTION(0, 137),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO137"),
-+ MTK_FUNCTION(1, "AUD_SYNC_MOSI"),
-+ MTK_FUNCTION(2, "AUD_SYNC_MISO"),
-+ MTK_FUNCTION(3, "I2S1_BCK")
-+ ),
-+ MTK_PIN(
-+ 138, "GPIO138",
-+ MTK_EINT_FUNCTION(0, 138),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO138"),
-+ MTK_FUNCTION(1, "AUD_DAT_MOSI0"),
-+ MTK_FUNCTION(2, "AUD_DAT_MISO0"),
-+ MTK_FUNCTION(3, "I2S1_LRCK"),
-+ MTK_FUNCTION(7, "DBG_MON_B24")
-+ ),
-+ MTK_PIN(
-+ 139, "GPIO139",
-+ MTK_EINT_FUNCTION(0, 139),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO139"),
-+ MTK_FUNCTION(1, "AUD_DAT_MOSI1"),
-+ MTK_FUNCTION(2, "AUD_DAT_MISO1"),
-+ MTK_FUNCTION(3, "I2S1_DO"),
-+ MTK_FUNCTION(6, "UFS_MPHY_SDA")
-+ ),
-+ MTK_PIN(
-+ 140, "GPIO140",
-+ MTK_EINT_FUNCTION(0, 140),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO140"),
-+ MTK_FUNCTION(1, "AUD_CLK_MISO"),
-+ MTK_FUNCTION(2, "AUD_CLK_MOSI"),
-+ MTK_FUNCTION(3, "I2S0_MCK"),
-+ MTK_FUNCTION(6, "UFS_UNIPRO_SDA")
-+ ),
-+ MTK_PIN(
-+ 141, "GPIO141",
-+ MTK_EINT_FUNCTION(0, 141),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO141"),
-+ MTK_FUNCTION(1, "AUD_SYNC_MISO"),
-+ MTK_FUNCTION(2, "AUD_SYNC_MOSI"),
-+ MTK_FUNCTION(3, "I2S0_BCK")
-+ ),
-+ MTK_PIN(
-+ 142, "GPIO142",
-+ MTK_EINT_FUNCTION(0, 142),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO142"),
-+ MTK_FUNCTION(1, "AUD_DAT_MISO0"),
-+ MTK_FUNCTION(2, "AUD_DAT_MOSI0"),
-+ MTK_FUNCTION(3, "I2S0_LRCK"),
-+ MTK_FUNCTION(4, "VOW_DAT_MISO"),
-+ MTK_FUNCTION(7, "DBG_MON_B25")
-+ ),
-+ MTK_PIN(
-+ 143, "GPIO143",
-+ MTK_EINT_FUNCTION(0, 143),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO143"),
-+ MTK_FUNCTION(1, "AUD_DAT_MISO1"),
-+ MTK_FUNCTION(2, "AUD_DAT_MOSI1"),
-+ MTK_FUNCTION(3, "I2S0_DI"),
-+ MTK_FUNCTION(4, "VOW_CLK_MISO"),
-+ MTK_FUNCTION(6, "UFS_MPHY_SCL"),
-+ MTK_FUNCTION(7, "DBG_MON_B26")
-+ ),
-+ MTK_PIN(
-+ 144, "GPIO144",
-+ MTK_EINT_FUNCTION(0, 144),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO144"),
-+ MTK_FUNCTION(1, "PWRAP_SPI0_MI"),
-+ MTK_FUNCTION(2, "PWRAP_SPI0_MO")
-+ ),
-+ MTK_PIN(
-+ 145, "GPIO145",
-+ MTK_EINT_FUNCTION(0, 145),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO145"),
-+ MTK_FUNCTION(1, "PWRAP_SPI0_CSN")
-+ ),
-+ MTK_PIN(
-+ 146, "GPIO146",
-+ MTK_EINT_FUNCTION(0, 146),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO146"),
-+ MTK_FUNCTION(1, "PWRAP_SPI0_MO"),
-+ MTK_FUNCTION(2, "PWRAP_SPI0_MI")
-+ ),
-+ MTK_PIN(
-+ 147, "GPIO147",
-+ MTK_EINT_FUNCTION(0, 147),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO147"),
-+ MTK_FUNCTION(1, "PWRAP_SPI0_CK")
-+ ),
-+ MTK_PIN(
-+ 148, "GPIO148",
-+ MTK_EINT_FUNCTION(0, 148),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO148"),
-+ MTK_FUNCTION(1, "SRCLKENA0")
-+ ),
-+ MTK_PIN(
-+ 149, "GPIO149",
-+ MTK_EINT_FUNCTION(0, 149),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO149"),
-+ MTK_FUNCTION(1, "SRCLKENA1")
-+ ),
-+ MTK_PIN(
-+ 150, "GPIO150",
-+ MTK_EINT_FUNCTION(0, 150),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO150"),
-+ MTK_FUNCTION(1, "PWM_A"),
-+ MTK_FUNCTION(2, "CMFLASH"),
-+ MTK_FUNCTION(3, "CLKM0"),
-+ MTK_FUNCTION(7, "DBG_MON_B30")
-+ ),
-+ MTK_PIN(
-+ 151, "GPIO151",
-+ MTK_EINT_FUNCTION(0, 151),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO151"),
-+ MTK_FUNCTION(1, "PWM_B"),
-+ MTK_FUNCTION(2, "CMVREF0"),
-+ MTK_FUNCTION(3, "CLKM1"),
-+ MTK_FUNCTION(7, "DBG_MON_B20")
-+ ),
-+ MTK_PIN(
-+ 152, "GPIO152",
-+ MTK_EINT_FUNCTION(0, 152),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO152"),
-+ MTK_FUNCTION(1, "PWM_C"),
-+ MTK_FUNCTION(2, "CMFLASH"),
-+ MTK_FUNCTION(3, "CLKM2"),
-+ MTK_FUNCTION(7, "DBG_MON_B21")
-+ ),
-+ MTK_PIN(
-+ 153, "GPIO153",
-+ MTK_EINT_FUNCTION(0, 153),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO153"),
-+ MTK_FUNCTION(1, "PWM_A"),
-+ MTK_FUNCTION(2, "CMVREF0"),
-+ MTK_FUNCTION(3, "CLKM3"),
-+ MTK_FUNCTION(7, "DBG_MON_B22")
-+ ),
-+ MTK_PIN(
-+ 154, "GPIO154",
-+ MTK_EINT_FUNCTION(0, 154),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO154"),
-+ MTK_FUNCTION(1, "SCP_VREQ_VAO"),
-+ MTK_FUNCTION(2, "DVFSRC_EXT_REQ"),
-+ MTK_FUNCTION(7, "DBG_MON_B18")
-+ ),
-+ MTK_PIN(
-+ 155, "GPIO155",
-+ MTK_EINT_FUNCTION(0, 155),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO155"),
-+ MTK_FUNCTION(1, "ANT_SEL0"),
-+ MTK_FUNCTION(2, "DVFSRC_EXT_REQ"),
-+ MTK_FUNCTION(3, "CMVREF1"),
-+ MTK_FUNCTION(7, "SCP_JTAG_TDI")
-+ ),
-+ MTK_PIN(
-+ 156, "GPIO156",
-+ MTK_EINT_FUNCTION(0, 156),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO156"),
-+ MTK_FUNCTION(1, "ANT_SEL1"),
-+ MTK_FUNCTION(2, "SRCLKENAI0"),
-+ MTK_FUNCTION(3, "SCL6"),
-+ MTK_FUNCTION(4, "KPCOL2"),
-+ MTK_FUNCTION(5, "IDDIG"),
-+ MTK_FUNCTION(7, "SCP_JTAG_TCK")
-+ ),
-+ MTK_PIN(
-+ 157, "GPIO157",
-+ MTK_EINT_FUNCTION(0, 157),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO157"),
-+ MTK_FUNCTION(1, "ANT_SEL2"),
-+ MTK_FUNCTION(2, "SRCLKENAI1"),
-+ MTK_FUNCTION(3, "SDA6"),
-+ MTK_FUNCTION(4, "KPROW2"),
-+ MTK_FUNCTION(5, "USB_DRVVBUS"),
-+ MTK_FUNCTION(7, "SCP_JTAG_TRSTN")
-+ ),
-+ MTK_PIN(
-+ 158, "GPIO158",
-+ MTK_EINT_FUNCTION(0, 158),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO158"),
-+ MTK_FUNCTION(1, "ANT_SEL3")
-+ ),
-+ MTK_PIN(
-+ 159, "GPIO159",
-+ MTK_EINT_FUNCTION(0, 159),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO159"),
-+ MTK_FUNCTION(1, "ANT_SEL4")
-+ ),
-+ MTK_PIN(
-+ 160, "GPIO160",
-+ MTK_EINT_FUNCTION(0, 160),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO160"),
-+ MTK_FUNCTION(1, "ANT_SEL5")
-+ ),
-+ MTK_PIN(
-+ 161, "GPIO161",
-+ MTK_EINT_FUNCTION(0, 161),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO161"),
-+ MTK_FUNCTION(1, "SPI1_A_MI"),
-+ MTK_FUNCTION(2, "SCP_SPI1_MI"),
-+ MTK_FUNCTION(3, "IDDIG"),
-+ MTK_FUNCTION(4, "ANT_SEL6"),
-+ MTK_FUNCTION(5, "KPCOL2"),
-+ MTK_FUNCTION(6, "PTA_RXD"),
-+ MTK_FUNCTION(7, "DBG_MON_B19")
-+ ),
-+ MTK_PIN(
-+ 162, "GPIO162",
-+ MTK_EINT_FUNCTION(0, 162),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO162"),
-+ MTK_FUNCTION(1, "SPI1_A_CSB"),
-+ MTK_FUNCTION(2, "SCP_SPI1_CS"),
-+ MTK_FUNCTION(3, "USB_DRVVBUS"),
-+ MTK_FUNCTION(4, "ANT_SEL5"),
-+ MTK_FUNCTION(5, "KPROW2"),
-+ MTK_FUNCTION(6, "PTA_TXD")
-+ ),
-+ MTK_PIN(
-+ 163, "GPIO163",
-+ MTK_EINT_FUNCTION(0, 163),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO163"),
-+ MTK_FUNCTION(1, "SPI1_A_MO"),
-+ MTK_FUNCTION(2, "SCP_SPI1_MO"),
-+ MTK_FUNCTION(3, "SDA1"),
-+ MTK_FUNCTION(4, "ANT_SEL4"),
-+ MTK_FUNCTION(5, "CMMCLK2"),
-+ MTK_FUNCTION(6, "DMIC_CLK")
-+ ),
-+ MTK_PIN(
-+ 164, "GPIO164",
-+ MTK_EINT_FUNCTION(0, 164),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO164"),
-+ MTK_FUNCTION(1, "SPI1_A_CLK"),
-+ MTK_FUNCTION(2, "SCP_SPI1_CK"),
-+ MTK_FUNCTION(3, "SCL1"),
-+ MTK_FUNCTION(4, "ANT_SEL3"),
-+ MTK_FUNCTION(5, "CMMCLK3"),
-+ MTK_FUNCTION(6, "DMIC_DAT")
-+ ),
-+ MTK_PIN(
-+ 165, "GPIO165",
-+ MTK_EINT_FUNCTION(0, 165),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO165"),
-+ MTK_FUNCTION(1, "PWM_B"),
-+ MTK_FUNCTION(2, "CMMCLK2"),
-+ MTK_FUNCTION(3, "SCP_VREQ_VAO"),
-+ MTK_FUNCTION(6, "TDM_MCK_2ND"),
-+ MTK_FUNCTION(7, "SCP_JTAG_TDO")
-+ ),
-+ MTK_PIN(
-+ 166, "GPIO166",
-+ MTK_EINT_FUNCTION(0, 166),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO166"),
-+ MTK_FUNCTION(1, "ANT_SEL6")
-+ ),
-+ MTK_PIN(
-+ 167, "GPIO167",
-+ MTK_EINT_FUNCTION(0, 167),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO167"),
-+ MTK_FUNCTION(1, "RFIC0_BSI_EN"),
-+ MTK_FUNCTION(2, "SPM_BSI_EN")
-+ ),
-+ MTK_PIN(
-+ 168, "GPIO168",
-+ MTK_EINT_FUNCTION(0, 168),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO168"),
-+ MTK_FUNCTION(1, "RFIC0_BSI_CK"),
-+ MTK_FUNCTION(2, "SPM_BSI_CK")
-+ ),
-+ MTK_PIN(
-+ 169, "GPIO169",
-+ MTK_EINT_FUNCTION(0, 169),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO169"),
-+ MTK_FUNCTION(1, "PWM_C"),
-+ MTK_FUNCTION(2, "CMMCLK3"),
-+ MTK_FUNCTION(3, "CMVREF1"),
-+ MTK_FUNCTION(4, "ANT_SEL7"),
-+ MTK_FUNCTION(5, "AGPS_SYNC"),
-+ MTK_FUNCTION(6, "TDM_BCK_2ND"),
-+ MTK_FUNCTION(7, "SCP_JTAG_TMS")
-+ ),
-+ MTK_PIN(
-+ 170, "GPIO170",
-+ MTK_EINT_FUNCTION(0, 170),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO170"),
-+ MTK_FUNCTION(1, "I2S1_BCK"),
-+ MTK_FUNCTION(2, "I2S3_BCK"),
-+ MTK_FUNCTION(3, "SCL7"),
-+ MTK_FUNCTION(4, "I2S5_BCK"),
-+ MTK_FUNCTION(5, "EXT_FRAME_SYNC"),
-+ MTK_FUNCTION(6, "TDM_LRCK_2ND"),
-+ MTK_FUNCTION(7, "ANT_SEL3")
-+ ),
-+ MTK_PIN(
-+ 171, "GPIO171",
-+ MTK_EINT_FUNCTION(0, 184),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO171"),
-+ MTK_FUNCTION(1, "I2S1_LRCK"),
-+ MTK_FUNCTION(2, "I2S3_LRCK"),
-+ MTK_FUNCTION(3, "SDA7"),
-+ MTK_FUNCTION(4, "I2S5_LRCK"),
-+ MTK_FUNCTION(5, "URXD1"),
-+ MTK_FUNCTION(6, "TDM_DATA0_2ND"),
-+ MTK_FUNCTION(7, "ANT_SEL4")
-+ ),
-+ MTK_PIN(
-+ 172, "GPIO172",
-+ MTK_EINT_FUNCTION(0, 185),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO172"),
-+ MTK_FUNCTION(1, "I2S1_DO"),
-+ MTK_FUNCTION(2, "I2S3_DO"),
-+ MTK_FUNCTION(3, "SCL8"),
-+ MTK_FUNCTION(4, "I2S5_DO"),
-+ MTK_FUNCTION(5, "UTXD1"),
-+ MTK_FUNCTION(6, "TDM_DATA1_2ND"),
-+ MTK_FUNCTION(7, "ANT_SEL5")
-+ ),
-+ MTK_PIN(
-+ 173, "GPIO173",
-+ MTK_EINT_FUNCTION(0, 186),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO173"),
-+ MTK_FUNCTION(1, "I2S1_MCK"),
-+ MTK_FUNCTION(2, "I2S3_MCK"),
-+ MTK_FUNCTION(3, "SDA8"),
-+ MTK_FUNCTION(4, "I2S5_MCK"),
-+ MTK_FUNCTION(5, "UCTS0"),
-+ MTK_FUNCTION(6, "TDM_DATA2_2ND"),
-+ MTK_FUNCTION(7, "ANT_SEL6")
-+ ),
-+ MTK_PIN(
-+ 174, "GPIO174",
-+ MTK_EINT_FUNCTION(0, 187),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO174"),
-+ MTK_FUNCTION(1, "I2S2_DI"),
-+ MTK_FUNCTION(2, "I2S0_DI"),
-+ MTK_FUNCTION(3, "DVFSRC_EXT_REQ"),
-+ MTK_FUNCTION(4, "I2S2_DI2"),
-+ MTK_FUNCTION(5, "URTS0"),
-+ MTK_FUNCTION(6, "TDM_DATA3_2ND"),
-+ MTK_FUNCTION(7, "ANT_SEL7")
-+ ),
-+ MTK_PIN(
-+ 175, "GPIO175",
-+ MTK_EINT_FUNCTION(0, 188),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO175"),
-+ MTK_FUNCTION(1, "ANT_SEL7")
-+ ),
-+ MTK_PIN(
-+ 176, "GPIO176",
-+ MTK_EINT_FUNCTION(0, 189),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO176")
-+ ),
-+ MTK_PIN(
-+ 177, "GPIO177",
-+ MTK_EINT_FUNCTION(0, 190),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO177")
-+ ),
-+ MTK_PIN(
-+ 178, "GPIO178",
-+ MTK_EINT_FUNCTION(0, 191),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO178")
-+ ),
-+ MTK_PIN(
-+ 179, "GPIO179",
-+ MTK_EINT_FUNCTION(0, 192),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO179")
-+ ),
-+ MTK_PIN(
-+ 180, "GPIO180",
-+ MTK_EINT_FUNCTION(0, 171),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO180")
-+ ),
-+ MTK_PIN(
-+ 181, "GPIO181",
-+ MTK_EINT_FUNCTION(0, 172),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO181")
-+ ),
-+ MTK_PIN(
-+ 182, "GPIO182",
-+ MTK_EINT_FUNCTION(0, 173),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO182")
-+ ),
-+ MTK_PIN(
-+ 183, "GPIO183",
-+ MTK_EINT_FUNCTION(0, 174),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO183")
-+ ),
-+ MTK_PIN(
-+ 184, "GPIO184",
-+ MTK_EINT_FUNCTION(0, 175),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO184")
-+ ),
-+ MTK_PIN(
-+ 185, "GPIO185",
-+ MTK_EINT_FUNCTION(0, 177),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO185")
-+ ),
-+ MTK_PIN(
-+ 186, "GPIO186",
-+ MTK_EINT_FUNCTION(0, 178),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO186")
-+ ),
-+ MTK_PIN(
-+ 187, "GPIO187",
-+ MTK_EINT_FUNCTION(0, 179),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO187")
-+ ),
-+ MTK_PIN(
-+ 188, "GPIO188",
-+ MTK_EINT_FUNCTION(0, 180),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO188")
-+ ),
-+ MTK_PIN(
-+ 189, "GPIO189",
-+ MTK_EINT_FUNCTION(0, 181),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO189")
-+ ),
-+ MTK_PIN(
-+ 190, "GPIO190",
-+ MTK_EINT_FUNCTION(0, 182),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO190")
-+ ),
-+ MTK_PIN(
-+ 191, "GPIO191",
-+ MTK_EINT_FUNCTION(0, 183),
-+ DRV_GRP4,
-+ MTK_FUNCTION(0, "GPIO191")
-+ ),
-+};
-+
-+#endif /* __PINCTRL_MTK_MT8183_H */
---- /dev/null
-+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-mt8516.h
-@@ -0,0 +1,1182 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+/*
-+ * Copyright (C) 2019 MediaTek Inc.
-+ */
-+#ifndef __PINCTRL_MTK_MT8516_H
-+#define __PINCTRL_MTK_MT8516_H
-+
-+#include <linux/pinctrl/pinctrl.h>
-+#include "pinctrl-mtk-common.h"
-+
-+static const struct mtk_desc_pin mtk_pins_mt8516[] = {
-+ MTK_PIN(
-+ PINCTRL_PIN(0, "EINT0"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 0),
-+ MTK_FUNCTION(0, "GPIO0"),
-+ MTK_FUNCTION(1, "PWM_B"),
-+ MTK_FUNCTION(3, "I2S2_BCK"),
-+ MTK_FUNCTION(4, "EXT_TXD0"),
-+ MTK_FUNCTION(6, "SQICS"),
-+ MTK_FUNCTION(7, "DBG_MON_A[6]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(1, "EINT1"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 1),
-+ MTK_FUNCTION(0, "GPIO1"),
-+ MTK_FUNCTION(1, "PWM_C"),
-+ MTK_FUNCTION(3, "I2S2_DI"),
-+ MTK_FUNCTION(4, "EXT_TXD1"),
-+ MTK_FUNCTION(5, "CONN_MCU_TDO"),
-+ MTK_FUNCTION(6, "SQISO"),
-+ MTK_FUNCTION(7, "DBG_MON_A[7]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(2, "EINT2"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 2),
-+ MTK_FUNCTION(0, "GPIO2"),
-+ MTK_FUNCTION(1, "CLKM0"),
-+ MTK_FUNCTION(3, "I2S2_LRCK"),
-+ MTK_FUNCTION(4, "EXT_TXD2"),
-+ MTK_FUNCTION(5, "CONN_MCU_DBGACK_N"),
-+ MTK_FUNCTION(6, "SQISI"),
-+ MTK_FUNCTION(7, "DBG_MON_A[8]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(3, "EINT3"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 3),
-+ MTK_FUNCTION(0, "GPIO3"),
-+ MTK_FUNCTION(1, "CLKM1"),
-+ MTK_FUNCTION(3, "SPI_MI"),
-+ MTK_FUNCTION(4, "EXT_TXD3"),
-+ MTK_FUNCTION(5, "CONN_MCU_DBGI_N"),
-+ MTK_FUNCTION(6, "SQIWP"),
-+ MTK_FUNCTION(7, "DBG_MON_A[9]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(4, "EINT4"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 4),
-+ MTK_FUNCTION(0, "GPIO4"),
-+ MTK_FUNCTION(1, "CLKM2"),
-+ MTK_FUNCTION(3, "SPI_MO"),
-+ MTK_FUNCTION(4, "EXT_TXC"),
-+ MTK_FUNCTION(5, "CONN_MCU_TCK"),
-+ MTK_FUNCTION(6, "CONN_MCU_AICE_JCKC"),
-+ MTK_FUNCTION(7, "DBG_MON_A[10]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(5, "EINT5"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 5),
-+ MTK_FUNCTION(0, "GPIO5"),
-+ MTK_FUNCTION(1, "UCTS2"),
-+ MTK_FUNCTION(3, "SPI_CSB"),
-+ MTK_FUNCTION(4, "EXT_RXER"),
-+ MTK_FUNCTION(5, "CONN_MCU_TDI"),
-+ MTK_FUNCTION(6, "CONN_TEST_CK"),
-+ MTK_FUNCTION(7, "DBG_MON_A[11]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(6, "EINT6"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 6),
-+ MTK_FUNCTION(0, "GPIO6"),
-+ MTK_FUNCTION(1, "URTS2"),
-+ MTK_FUNCTION(3, "SPI_CLK"),
-+ MTK_FUNCTION(4, "EXT_RXC"),
-+ MTK_FUNCTION(5, "CONN_MCU_TRST_B"),
-+ MTK_FUNCTION(7, "DBG_MON_A[12]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(7, "EINT7"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 7),
-+ MTK_FUNCTION(0, "GPIO7"),
-+ MTK_FUNCTION(1, "SQIRST"),
-+ MTK_FUNCTION(3, "SDA1_0"),
-+ MTK_FUNCTION(4, "EXT_RXDV"),
-+ MTK_FUNCTION(5, "CONN_MCU_TMS"),
-+ MTK_FUNCTION(6, "CONN_MCU_AICE_JMSC"),
-+ MTK_FUNCTION(7, "DBG_MON_A[13]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(8, "EINT8"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 8),
-+ MTK_FUNCTION(0, "GPIO8"),
-+ MTK_FUNCTION(1, "SQICK"),
-+ MTK_FUNCTION(2, "CLKM3"),
-+ MTK_FUNCTION(3, "SCL1_0"),
-+ MTK_FUNCTION(4, "EXT_RXD0"),
-+ MTK_FUNCTION(5, "ANT_SEL0"),
-+ MTK_FUNCTION(7, "DBG_MON_A[14]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(9, "EINT9"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 9),
-+ MTK_FUNCTION(0, "GPIO9"),
-+ MTK_FUNCTION(1, "CLKM4"),
-+ MTK_FUNCTION(2, "SDA2_0"),
-+ MTK_FUNCTION(3, "EXT_FRAME_SYNC"),
-+ MTK_FUNCTION(4, "EXT_RXD1"),
-+ MTK_FUNCTION(5, "ANT_SEL1"),
-+ MTK_FUNCTION(7, "DBG_MON_A[15]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(10, "EINT10"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 10),
-+ MTK_FUNCTION(0, "GPIO10"),
-+ MTK_FUNCTION(1, "CLKM5"),
-+ MTK_FUNCTION(2, "SCL2_0"),
-+ MTK_FUNCTION(3, "EXT_FRAME_SYNC"),
-+ MTK_FUNCTION(4, "EXT_RXD2"),
-+ MTK_FUNCTION(5, "ANT_SEL2"),
-+ MTK_FUNCTION(7, "DBG_MON_A[16]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(11, "EINT11"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 11),
-+ MTK_FUNCTION(0, "GPIO11"),
-+ MTK_FUNCTION(1, "CLKM4"),
-+ MTK_FUNCTION(2, "PWM_C"),
-+ MTK_FUNCTION(3, "CONN_TEST_CK"),
-+ MTK_FUNCTION(4, "ANT_SEL3"),
-+ MTK_FUNCTION(6, "EXT_RXD3"),
-+ MTK_FUNCTION(7, "DBG_MON_A[17]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(12, "EINT12"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 12),
-+ MTK_FUNCTION(0, "GPIO12"),
-+ MTK_FUNCTION(1, "CLKM5"),
-+ MTK_FUNCTION(2, "PWM_A"),
-+ MTK_FUNCTION(3, "SPDIF_OUT"),
-+ MTK_FUNCTION(4, "ANT_SEL4"),
-+ MTK_FUNCTION(6, "EXT_TXEN"),
-+ MTK_FUNCTION(7, "DBG_MON_A[18]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(13, "EINT13"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 13),
-+ MTK_FUNCTION(0, "GPIO13"),
-+ MTK_FUNCTION(3, "TSF_IN"),
-+ MTK_FUNCTION(4, "ANT_SEL5"),
-+ MTK_FUNCTION(6, "SPDIF_IN"),
-+ MTK_FUNCTION(7, "DBG_MON_A[19]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(14, "EINT14"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 14),
-+ MTK_FUNCTION(0, "GPIO14"),
-+ MTK_FUNCTION(2, "I2S_8CH_DO1"),
-+ MTK_FUNCTION(3, "TDM_RX_MCK"),
-+ MTK_FUNCTION(4, "ANT_SEL1"),
-+ MTK_FUNCTION(5, "CONN_MCU_DBGACK_N"),
-+ MTK_FUNCTION(6, "NCLE"),
-+ MTK_FUNCTION(7, "DBG_MON_B[8]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(15, "EINT15"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 15),
-+ MTK_FUNCTION(0, "GPIO15"),
-+ MTK_FUNCTION(2, "I2S_8CH_LRCK"),
-+ MTK_FUNCTION(3, "TDM_RX_BCK"),
-+ MTK_FUNCTION(4, "ANT_SEL2"),
-+ MTK_FUNCTION(5, "CONN_MCU_DBGI_N"),
-+ MTK_FUNCTION(6, "NCEB1"),
-+ MTK_FUNCTION(7, "DBG_MON_B[9]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(16, "EINT16"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 16),
-+ MTK_FUNCTION(0, "GPIO16"),
-+ MTK_FUNCTION(2, "I2S_8CH_BCK"),
-+ MTK_FUNCTION(3, "TDM_RX_LRCK"),
-+ MTK_FUNCTION(4, "ANT_SEL3"),
-+ MTK_FUNCTION(5, "CONN_MCU_TRST_B"),
-+ MTK_FUNCTION(6, "NCEB0"),
-+ MTK_FUNCTION(7, "DBG_MON_B[10]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(17, "EINT17"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 17),
-+ MTK_FUNCTION(0, "GPIO17"),
-+ MTK_FUNCTION(2, "I2S_8CH_MCK"),
-+ MTK_FUNCTION(3, "TDM_RX_DI"),
-+ MTK_FUNCTION(4, "IDDIG"),
-+ MTK_FUNCTION(5, "ANT_SEL4"),
-+ MTK_FUNCTION(6, "NREB"),
-+ MTK_FUNCTION(7, "DBG_MON_B[11]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(18, "EINT18"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 18),
-+ MTK_FUNCTION(0, "GPIO18"),
-+ MTK_FUNCTION(2, "USB_DRVVBUS"),
-+ MTK_FUNCTION(3, "I2S3_LRCK"),
-+ MTK_FUNCTION(4, "CLKM1"),
-+ MTK_FUNCTION(5, "ANT_SEL3"),
-+ MTK_FUNCTION(6, "I2S2_BCK"),
-+ MTK_FUNCTION(7, "DBG_MON_A[20]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(19, "EINT19"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 19),
-+ MTK_FUNCTION(0, "GPIO19"),
-+ MTK_FUNCTION(1, "UCTS1"),
-+ MTK_FUNCTION(2, "IDDIG"),
-+ MTK_FUNCTION(3, "I2S3_BCK"),
-+ MTK_FUNCTION(4, "CLKM2"),
-+ MTK_FUNCTION(5, "ANT_SEL4"),
-+ MTK_FUNCTION(6, "I2S2_DI"),
-+ MTK_FUNCTION(7, "DBG_MON_A[21]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(20, "EINT20"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 20),
-+ MTK_FUNCTION(0, "GPIO20"),
-+ MTK_FUNCTION(1, "URTS1"),
-+ MTK_FUNCTION(3, "I2S3_DO"),
-+ MTK_FUNCTION(4, "CLKM3"),
-+ MTK_FUNCTION(5, "ANT_SEL5"),
-+ MTK_FUNCTION(6, "I2S2_LRCK"),
-+ MTK_FUNCTION(7, "DBG_MON_A[22]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(21, "EINT21"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 21),
-+ MTK_FUNCTION(0, "GPIO21"),
-+ MTK_FUNCTION(1, "NRNB"),
-+ MTK_FUNCTION(2, "ANT_SEL0"),
-+ MTK_FUNCTION(3, "I2S_8CH_DO4"),
-+ MTK_FUNCTION(7, "DBG_MON_B[31]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(22, "EINT22"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 22),
-+ MTK_FUNCTION(0, "GPIO22"),
-+ MTK_FUNCTION(2, "I2S_8CH_DO2"),
-+ MTK_FUNCTION(3, "TSF_IN"),
-+ MTK_FUNCTION(4, "USB_DRVVBUS"),
-+ MTK_FUNCTION(5, "SPDIF_OUT"),
-+ MTK_FUNCTION(6, "NRE_C"),
-+ MTK_FUNCTION(7, "DBG_MON_B[12]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(23, "EINT23"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 23),
-+ MTK_FUNCTION(0, "GPIO23"),
-+ MTK_FUNCTION(2, "I2S_8CH_DO3"),
-+ MTK_FUNCTION(3, "CLKM0"),
-+ MTK_FUNCTION(4, "IR"),
-+ MTK_FUNCTION(5, "SPDIF_IN"),
-+ MTK_FUNCTION(6, "NDQS_C"),
-+ MTK_FUNCTION(7, "DBG_MON_B[13]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(24, "EINT24"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 24),
-+ MTK_FUNCTION(0, "GPIO24"),
-+ MTK_FUNCTION(3, "ANT_SEL1"),
-+ MTK_FUNCTION(4, "UCTS2"),
-+ MTK_FUNCTION(5, "PWM_A"),
-+ MTK_FUNCTION(6, "I2S0_MCK"),
-+ MTK_FUNCTION(7, "DBG_MON_A[0]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(25, "EINT25"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 25),
-+ MTK_FUNCTION(0, "GPIO25"),
-+ MTK_FUNCTION(3, "ANT_SEL0"),
-+ MTK_FUNCTION(4, "URTS2"),
-+ MTK_FUNCTION(5, "PWM_B"),
-+ MTK_FUNCTION(6, "I2S_8CH_MCK"),
-+ MTK_FUNCTION(7, "DBG_MON_A[1]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(26, "PWRAP_SPI0_MI"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 26),
-+ MTK_FUNCTION(0, "GPIO26"),
-+ MTK_FUNCTION(1, "PWRAP_SPI0_MO"),
-+ MTK_FUNCTION(2, "PWRAP_SPI0_MI")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(27, "PWRAP_SPI0_MO"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 27),
-+ MTK_FUNCTION(0, "GPIO27"),
-+ MTK_FUNCTION(1, "PWRAP_SPI0_MI"),
-+ MTK_FUNCTION(2, "PWRAP_SPI0_MO")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(28, "PWRAP_INT"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 28),
-+ MTK_FUNCTION(0, "GPIO28"),
-+ MTK_FUNCTION(1, "I2S0_MCK"),
-+ MTK_FUNCTION(4, "I2S_8CH_MCK"),
-+ MTK_FUNCTION(5, "I2S2_MCK"),
-+ MTK_FUNCTION(6, "I2S3_MCK")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(29, "PWRAP_SPI0_CK"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 29),
-+ MTK_FUNCTION(0, "GPIO29"),
-+ MTK_FUNCTION(1, "PWRAP_SPI0_CK")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(30, "PWRAP_SPI0_CSN"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 30),
-+ MTK_FUNCTION(0, "GPIO30"),
-+ MTK_FUNCTION(1, "PWRAP_SPI0_CSN")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(31, "RTC32K_CK"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 31),
-+ MTK_FUNCTION(0, "GPIO31"),
-+ MTK_FUNCTION(1, "RTC32K_CK")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(32, "WATCHDOG"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 32),
-+ MTK_FUNCTION(0, "GPIO32"),
-+ MTK_FUNCTION(1, "WATCHDOG")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(33, "SRCLKENA"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 33),
-+ MTK_FUNCTION(0, "GPIO33"),
-+ MTK_FUNCTION(1, "SRCLKENA0")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(34, "URXD2"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 34),
-+ MTK_FUNCTION(0, "GPIO34"),
-+ MTK_FUNCTION(1, "URXD2"),
-+ MTK_FUNCTION(3, "UTXD2"),
-+ MTK_FUNCTION(4, "DBG_SCL"),
-+ MTK_FUNCTION(6, "I2S2_MCK"),
-+ MTK_FUNCTION(7, "DBG_MON_B[0]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(35, "UTXD2"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 35),
-+ MTK_FUNCTION(0, "GPIO35"),
-+ MTK_FUNCTION(1, "UTXD2"),
-+ MTK_FUNCTION(3, "URXD2"),
-+ MTK_FUNCTION(4, "DBG_SDA"),
-+ MTK_FUNCTION(6, "I2S3_MCK"),
-+ MTK_FUNCTION(7, "DBG_MON_B[1]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(36, "MRG_CLK"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 36),
-+ MTK_FUNCTION(0, "GPIO36"),
-+ MTK_FUNCTION(1, "MRG_CLK"),
-+ MTK_FUNCTION(3, "I2S0_BCK"),
-+ MTK_FUNCTION(4, "I2S3_BCK"),
-+ MTK_FUNCTION(5, "PCM0_CLK"),
-+ MTK_FUNCTION(6, "IR"),
-+ MTK_FUNCTION(7, "DBG_MON_A[2]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(37, "MRG_SYNC"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 37),
-+ MTK_FUNCTION(0, "GPIO37"),
-+ MTK_FUNCTION(1, "MRG_SYNC"),
-+ MTK_FUNCTION(3, "I2S0_LRCK"),
-+ MTK_FUNCTION(4, "I2S3_LRCK"),
-+ MTK_FUNCTION(5, "PCM0_SYNC"),
-+ MTK_FUNCTION(6, "EXT_COL"),
-+ MTK_FUNCTION(7, "DBG_MON_A[3]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(38, "MRG_DI"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 38),
-+ MTK_FUNCTION(0, "GPIO38"),
-+ MTK_FUNCTION(1, "MRG_DI"),
-+ MTK_FUNCTION(3, "I2S0_DI"),
-+ MTK_FUNCTION(4, "I2S3_DO"),
-+ MTK_FUNCTION(5, "PCM0_DI"),
-+ MTK_FUNCTION(6, "EXT_MDIO"),
-+ MTK_FUNCTION(7, "DBG_MON_A[4]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(39, "MRG_DO"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 39),
-+ MTK_FUNCTION(0, "GPIO39"),
-+ MTK_FUNCTION(1, "MRG_DO"),
-+ MTK_FUNCTION(3, "I2S0_MCK"),
-+ MTK_FUNCTION(4, "I2S3_MCK"),
-+ MTK_FUNCTION(5, "PCM0_DO"),
-+ MTK_FUNCTION(6, "EXT_MDC"),
-+ MTK_FUNCTION(7, "DBG_MON_A[5]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(40, "KPROW0"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 40),
-+ MTK_FUNCTION(0, "GPIO40"),
-+ MTK_FUNCTION(1, "KPROW0"),
-+ MTK_FUNCTION(7, "DBG_MON_B[4]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(41, "KPROW1"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 41),
-+ MTK_FUNCTION(0, "GPIO41"),
-+ MTK_FUNCTION(1, "KPROW1"),
-+ MTK_FUNCTION(2, "IDDIG"),
-+ MTK_FUNCTION(3, "EXT_FRAME_SYNC"),
-+ MTK_FUNCTION(7, "DBG_MON_B[5]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(42, "KPCOL0"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 42),
-+ MTK_FUNCTION(0, "GPIO42"),
-+ MTK_FUNCTION(1, "KPCOL0"),
-+ MTK_FUNCTION(7, "DBG_MON_B[6]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(43, "KPCOL1"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 43),
-+ MTK_FUNCTION(0, "GPIO43"),
-+ MTK_FUNCTION(1, "KPCOL1"),
-+ MTK_FUNCTION(2, "USB_DRVVBUS"),
-+ MTK_FUNCTION(3, "EXT_FRAME_SYNC"),
-+ MTK_FUNCTION(4, "TSF_IN"),
-+ MTK_FUNCTION(7, "DBG_MON_B[7]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(44, "JTMS"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 44),
-+ MTK_FUNCTION(0, "GPIO44"),
-+ MTK_FUNCTION(1, "JTMS"),
-+ MTK_FUNCTION(2, "CONN_MCU_TMS"),
-+ MTK_FUNCTION(3, "CONN_MCU_AICE_JMSC")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(45, "JTCK"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 45),
-+ MTK_FUNCTION(0, "GPIO45"),
-+ MTK_FUNCTION(1, "JTCK"),
-+ MTK_FUNCTION(2, "CONN_MCU_TCK"),
-+ MTK_FUNCTION(3, "CONN_MCU_AICE_JCKC")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(46, "JTDI"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 46),
-+ MTK_FUNCTION(0, "GPIO46"),
-+ MTK_FUNCTION(1, "JTDI"),
-+ MTK_FUNCTION(2, "CONN_MCU_TDI")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(47, "JTDO"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 47),
-+ MTK_FUNCTION(0, "GPIO47"),
-+ MTK_FUNCTION(1, "JTDO"),
-+ MTK_FUNCTION(2, "CONN_MCU_TDO")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(48, "SPI_CS"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 48),
-+ MTK_FUNCTION(0, "GPIO48"),
-+ MTK_FUNCTION(1, "SPI_CSB"),
-+ MTK_FUNCTION(3, "I2S0_DI"),
-+ MTK_FUNCTION(4, "I2S2_BCK"),
-+ MTK_FUNCTION(7, "DBG_MON_A[23]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(49, "SPI_CK"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 49),
-+ MTK_FUNCTION(0, "GPIO49"),
-+ MTK_FUNCTION(1, "SPI_CLK"),
-+ MTK_FUNCTION(3, "I2S0_LRCK"),
-+ MTK_FUNCTION(4, "I2S2_DI"),
-+ MTK_FUNCTION(7, "DBG_MON_A[24]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(50, "SPI_MI"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 50),
-+ MTK_FUNCTION(0, "GPIO50"),
-+ MTK_FUNCTION(1, "SPI_MI"),
-+ MTK_FUNCTION(2, "SPI_MO"),
-+ MTK_FUNCTION(3, "I2S0_BCK"),
-+ MTK_FUNCTION(4, "I2S2_LRCK"),
-+ MTK_FUNCTION(7, "DBG_MON_A[25]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(51, "SPI_MO"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 51),
-+ MTK_FUNCTION(0, "GPIO51"),
-+ MTK_FUNCTION(1, "SPI_MO"),
-+ MTK_FUNCTION(2, "SPI_MI"),
-+ MTK_FUNCTION(3, "I2S0_MCK"),
-+ MTK_FUNCTION(4, "I2S2_MCK"),
-+ MTK_FUNCTION(7, "DBG_MON_A[26]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(52, "SDA1"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 52),
-+ MTK_FUNCTION(0, "GPIO52"),
-+ MTK_FUNCTION(1, "SDA1_0")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(53, "SCL1"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 53),
-+ MTK_FUNCTION(0, "GPIO53"),
-+ MTK_FUNCTION(1, "SCL1_0")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(54, "GPIO54"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 54),
-+ MTK_FUNCTION(0, "GPIO54"),
-+ MTK_FUNCTION(2, "PWM_B"),
-+ MTK_FUNCTION(7, "DBG_MON_B[2]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(55, "I2S_DATA_IN"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 55),
-+ MTK_FUNCTION(0, "GPIO55"),
-+ MTK_FUNCTION(1, "I2S0_DI"),
-+ MTK_FUNCTION(2, "UCTS0"),
-+ MTK_FUNCTION(3, "I2S3_DO"),
-+ MTK_FUNCTION(4, "I2S_8CH_DO1"),
-+ MTK_FUNCTION(5, "PWM_A"),
-+ MTK_FUNCTION(6, "I2S2_BCK"),
-+ MTK_FUNCTION(7, "DBG_MON_A[28]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(56, "I2S_LRCK"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 56),
-+ MTK_FUNCTION(0, "GPIO56"),
-+ MTK_FUNCTION(1, "I2S0_LRCK"),
-+ MTK_FUNCTION(3, "I2S3_LRCK"),
-+ MTK_FUNCTION(4, "I2S_8CH_LRCK"),
-+ MTK_FUNCTION(5, "PWM_B"),
-+ MTK_FUNCTION(6, "I2S2_DI"),
-+ MTK_FUNCTION(7, "DBG_MON_A[29]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(57, "I2S_BCK"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 57),
-+ MTK_FUNCTION(0, "GPIO57"),
-+ MTK_FUNCTION(1, "I2S0_BCK"),
-+ MTK_FUNCTION(2, "URTS0"),
-+ MTK_FUNCTION(3, "I2S3_BCK"),
-+ MTK_FUNCTION(4, "I2S_8CH_BCK"),
-+ MTK_FUNCTION(5, "PWM_C"),
-+ MTK_FUNCTION(6, "I2S2_LRCK"),
-+ MTK_FUNCTION(7, "DBG_MON_A[30]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(58, "SDA0"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 58),
-+ MTK_FUNCTION(0, "GPIO58"),
-+ MTK_FUNCTION(1, "SDA0_0")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(59, "SCL0"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 59),
-+ MTK_FUNCTION(0, "GPIO59"),
-+ MTK_FUNCTION(1, "SCL0_0")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(60, "SDA2"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 60),
-+ MTK_FUNCTION(0, "GPIO60"),
-+ MTK_FUNCTION(1, "SDA2_0"),
-+ MTK_FUNCTION(2, "PWM_B")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(61, "SCL2"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 61),
-+ MTK_FUNCTION(0, "GPIO61"),
-+ MTK_FUNCTION(1, "SCL2_0"),
-+ MTK_FUNCTION(2, "PWM_C")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(62, "URXD0"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 62),
-+ MTK_FUNCTION(0, "GPIO62"),
-+ MTK_FUNCTION(1, "URXD0"),
-+ MTK_FUNCTION(2, "UTXD0")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(63, "UTXD0"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 63),
-+ MTK_FUNCTION(0, "GPIO63"),
-+ MTK_FUNCTION(1, "UTXD0"),
-+ MTK_FUNCTION(2, "URXD0")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(64, "URXD1"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 64),
-+ MTK_FUNCTION(0, "GPIO64"),
-+ MTK_FUNCTION(1, "URXD1"),
-+ MTK_FUNCTION(2, "UTXD1"),
-+ MTK_FUNCTION(7, "DBG_MON_A[27]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(65, "UTXD1"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 65),
-+ MTK_FUNCTION(0, "GPIO65"),
-+ MTK_FUNCTION(1, "UTXD1"),
-+ MTK_FUNCTION(2, "URXD1"),
-+ MTK_FUNCTION(7, "DBG_MON_A[31]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(66, "LCM_RST"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 66),
-+ MTK_FUNCTION(0, "GPIO66"),
-+ MTK_FUNCTION(1, "LCM_RST"),
-+ MTK_FUNCTION(3, "I2S0_MCK"),
-+ MTK_FUNCTION(7, "DBG_MON_B[3]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(67, "GPIO67"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 67),
-+ MTK_FUNCTION(0, "GPIO67"),
-+ MTK_FUNCTION(3, "I2S_8CH_MCK"),
-+ MTK_FUNCTION(7, "DBG_MON_B[14]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(68, "MSDC2_CMD"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 68),
-+ MTK_FUNCTION(0, "GPIO68"),
-+ MTK_FUNCTION(1, "MSDC2_CMD"),
-+ MTK_FUNCTION(2, "I2S_8CH_DO4"),
-+ MTK_FUNCTION(3, "SDA1_0"),
-+ MTK_FUNCTION(5, "USB_SDA"),
-+ MTK_FUNCTION(6, "I2S3_BCK"),
-+ MTK_FUNCTION(7, "DBG_MON_B[15]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(69, "MSDC2_CLK"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 69),
-+ MTK_FUNCTION(0, "GPIO69"),
-+ MTK_FUNCTION(1, "MSDC2_CLK"),
-+ MTK_FUNCTION(2, "I2S_8CH_DO3"),
-+ MTK_FUNCTION(3, "SCL1_0"),
-+ MTK_FUNCTION(5, "USB_SCL"),
-+ MTK_FUNCTION(6, "I2S3_LRCK"),
-+ MTK_FUNCTION(7, "DBG_MON_B[16]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(70, "MSDC2_DAT0"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 70),
-+ MTK_FUNCTION(0, "GPIO70"),
-+ MTK_FUNCTION(1, "MSDC2_DAT0"),
-+ MTK_FUNCTION(2, "I2S_8CH_DO2"),
-+ MTK_FUNCTION(5, "UTXD0"),
-+ MTK_FUNCTION(6, "I2S3_DO"),
-+ MTK_FUNCTION(7, "DBG_MON_B[17]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(71, "MSDC2_DAT1"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 71),
-+ MTK_FUNCTION(0, "GPIO71"),
-+ MTK_FUNCTION(1, "MSDC2_DAT1"),
-+ MTK_FUNCTION(2, "I2S_8CH_DO1"),
-+ MTK_FUNCTION(3, "PWM_A"),
-+ MTK_FUNCTION(4, "I2S3_MCK"),
-+ MTK_FUNCTION(5, "URXD0"),
-+ MTK_FUNCTION(6, "PWM_B"),
-+ MTK_FUNCTION(7, "DBG_MON_B[18]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(72, "MSDC2_DAT2"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 72),
-+ MTK_FUNCTION(0, "GPIO72"),
-+ MTK_FUNCTION(1, "MSDC2_DAT2"),
-+ MTK_FUNCTION(2, "I2S_8CH_LRCK"),
-+ MTK_FUNCTION(3, "SDA2_0"),
-+ MTK_FUNCTION(5, "UTXD1"),
-+ MTK_FUNCTION(6, "PWM_C"),
-+ MTK_FUNCTION(7, "DBG_MON_B[19]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(73, "MSDC2_DAT3"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 73),
-+ MTK_FUNCTION(0, "GPIO73"),
-+ MTK_FUNCTION(1, "MSDC2_DAT3"),
-+ MTK_FUNCTION(2, "I2S_8CH_BCK"),
-+ MTK_FUNCTION(3, "SCL2_0"),
-+ MTK_FUNCTION(4, "EXT_FRAME_SYNC"),
-+ MTK_FUNCTION(5, "URXD1"),
-+ MTK_FUNCTION(6, "PWM_A"),
-+ MTK_FUNCTION(7, "DBG_MON_B[20]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(74, "TDN3"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 74),
-+ MTK_FUNCTION(0, "GPIO74"),
-+ MTK_FUNCTION(1, "TDN3")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(75, "TDP3"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 75),
-+ MTK_FUNCTION(0, "GPIO75"),
-+ MTK_FUNCTION(1, "TDP3")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(76, "TDN2"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 76),
-+ MTK_FUNCTION(0, "GPIO76"),
-+ MTK_FUNCTION(1, "TDN2")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(77, "TDP2"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 77),
-+ MTK_FUNCTION(0, "GPIO77"),
-+ MTK_FUNCTION(1, "TDP2")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(78, "TCN"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 78),
-+ MTK_FUNCTION(0, "GPIO78"),
-+ MTK_FUNCTION(1, "TCN")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(79, "TCP"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 79),
-+ MTK_FUNCTION(0, "GPIO79"),
-+ MTK_FUNCTION(1, "TCP")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(80, "TDN1"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 80),
-+ MTK_FUNCTION(0, "GPIO80"),
-+ MTK_FUNCTION(1, "TDN1")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(81, "TDP1"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 81),
-+ MTK_FUNCTION(0, "GPIO81"),
-+ MTK_FUNCTION(1, "TDP1")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(82, "TDN0"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 82),
-+ MTK_FUNCTION(0, "GPIO82"),
-+ MTK_FUNCTION(1, "TDN0")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(83, "TDP0"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 83),
-+ MTK_FUNCTION(0, "GPIO83"),
-+ MTK_FUNCTION(1, "TDP0")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(84, "RDN0"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 84),
-+ MTK_FUNCTION(0, "GPIO84"),
-+ MTK_FUNCTION(1, "RDN0")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(85, "RDP0"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 85),
-+ MTK_FUNCTION(0, "GPIO85"),
-+ MTK_FUNCTION(1, "RDP0")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(86, "RDN1"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 86),
-+ MTK_FUNCTION(0, "GPIO86"),
-+ MTK_FUNCTION(1, "RDN1")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(87, "RDP1"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 87),
-+ MTK_FUNCTION(0, "GPIO87"),
-+ MTK_FUNCTION(1, "RDP1")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(88, "RCN"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 88),
-+ MTK_FUNCTION(0, "GPIO88"),
-+ MTK_FUNCTION(1, "RCN")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(89, "RCP"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 89),
-+ MTK_FUNCTION(0, "GPIO89"),
-+ MTK_FUNCTION(1, "RCP")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(90, "RDN2"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 90),
-+ MTK_FUNCTION(0, "GPIO90"),
-+ MTK_FUNCTION(1, "RDN2"),
-+ MTK_FUNCTION(2, "CMDAT8")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(91, "RDP2"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 91),
-+ MTK_FUNCTION(0, "GPIO91"),
-+ MTK_FUNCTION(1, "RDP2"),
-+ MTK_FUNCTION(2, "CMDAT9")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(92, "RDN3"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 92),
-+ MTK_FUNCTION(0, "GPIO92"),
-+ MTK_FUNCTION(1, "RDN3"),
-+ MTK_FUNCTION(2, "CMDAT4")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(93, "RDP3"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 93),
-+ MTK_FUNCTION(0, "GPIO93"),
-+ MTK_FUNCTION(1, "RDP3"),
-+ MTK_FUNCTION(2, "CMDAT5")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(94, "RCN_A"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 94),
-+ MTK_FUNCTION(0, "GPIO94"),
-+ MTK_FUNCTION(1, "RCN_A"),
-+ MTK_FUNCTION(2, "CMDAT6")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(95, "RCP_A"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 95),
-+ MTK_FUNCTION(0, "GPIO95"),
-+ MTK_FUNCTION(1, "RCP_A"),
-+ MTK_FUNCTION(2, "CMDAT7")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(96, "RDN1_A"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 96),
-+ MTK_FUNCTION(0, "GPIO96"),
-+ MTK_FUNCTION(1, "RDN1_A"),
-+ MTK_FUNCTION(2, "CMDAT2"),
-+ MTK_FUNCTION(3, "CMCSD2")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(97, "RDP1_A"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 97),
-+ MTK_FUNCTION(0, "GPIO97"),
-+ MTK_FUNCTION(1, "RDP1_A"),
-+ MTK_FUNCTION(2, "CMDAT3"),
-+ MTK_FUNCTION(3, "CMCSD3")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(98, "RDN0_A"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 98),
-+ MTK_FUNCTION(0, "GPIO98"),
-+ MTK_FUNCTION(1, "RDN0_A"),
-+ MTK_FUNCTION(2, "CMHSYNC")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(99, "RDP0_A"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 99),
-+ MTK_FUNCTION(0, "GPIO99"),
-+ MTK_FUNCTION(1, "RDP0_A"),
-+ MTK_FUNCTION(2, "CMVSYNC")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(100, "CMDAT0"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 100),
-+ MTK_FUNCTION(0, "GPIO100"),
-+ MTK_FUNCTION(1, "CMDAT0"),
-+ MTK_FUNCTION(2, "CMCSD0"),
-+ MTK_FUNCTION(3, "ANT_SEL2"),
-+ MTK_FUNCTION(5, "TDM_RX_MCK"),
-+ MTK_FUNCTION(7, "DBG_MON_B[21]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(101, "CMDAT1"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 101),
-+ MTK_FUNCTION(0, "GPIO101"),
-+ MTK_FUNCTION(1, "CMDAT1"),
-+ MTK_FUNCTION(2, "CMCSD1"),
-+ MTK_FUNCTION(3, "ANT_SEL3"),
-+ MTK_FUNCTION(4, "CMFLASH"),
-+ MTK_FUNCTION(5, "TDM_RX_BCK"),
-+ MTK_FUNCTION(7, "DBG_MON_B[22]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(102, "CMMCLK"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 102),
-+ MTK_FUNCTION(0, "GPIO102"),
-+ MTK_FUNCTION(1, "CMMCLK"),
-+ MTK_FUNCTION(3, "ANT_SEL4"),
-+ MTK_FUNCTION(5, "TDM_RX_LRCK"),
-+ MTK_FUNCTION(7, "DBG_MON_B[23]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(103, "CMPCLK"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 103),
-+ MTK_FUNCTION(0, "GPIO103"),
-+ MTK_FUNCTION(1, "CMPCLK"),
-+ MTK_FUNCTION(2, "CMCSK"),
-+ MTK_FUNCTION(3, "ANT_SEL5"),
-+ MTK_FUNCTION(5, " TDM_RX_DI"),
-+ MTK_FUNCTION(7, "DBG_MON_B[24]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(104, "MSDC1_CMD"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 104),
-+ MTK_FUNCTION(0, "GPIO104"),
-+ MTK_FUNCTION(1, "MSDC1_CMD"),
-+ MTK_FUNCTION(4, "SQICS"),
-+ MTK_FUNCTION(7, "DBG_MON_B[25]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(105, "MSDC1_CLK"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 105),
-+ MTK_FUNCTION(0, "GPIO105"),
-+ MTK_FUNCTION(1, "MSDC1_CLK"),
-+ MTK_FUNCTION(4, "SQISO"),
-+ MTK_FUNCTION(7, "DBG_MON_B[26]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(106, "MSDC1_DAT0"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 106),
-+ MTK_FUNCTION(0, "GPIO106"),
-+ MTK_FUNCTION(1, "MSDC1_DAT0"),
-+ MTK_FUNCTION(4, "SQISI"),
-+ MTK_FUNCTION(7, "DBG_MON_B[27]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(107, "MSDC1_DAT1"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 107),
-+ MTK_FUNCTION(0, "GPIO107"),
-+ MTK_FUNCTION(1, "MSDC1_DAT1"),
-+ MTK_FUNCTION(4, "SQIWP"),
-+ MTK_FUNCTION(7, "DBG_MON_B[28]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(108, "MSDC1_DAT2"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 108),
-+ MTK_FUNCTION(0, "GPIO108"),
-+ MTK_FUNCTION(1, "MSDC1_DAT2"),
-+ MTK_FUNCTION(4, "SQIRST"),
-+ MTK_FUNCTION(7, "DBG_MON_B[29]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(109, "MSDC1_DAT3"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 109),
-+ MTK_FUNCTION(0, "GPIO109"),
-+ MTK_FUNCTION(1, "MSDC1_DAT3"),
-+ MTK_FUNCTION(4, "SQICK"), /* WIP */
-+ MTK_FUNCTION(7, "DBG_MON_B[30]")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(110, "MSDC0_DAT7"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 110),
-+ MTK_FUNCTION(0, "GPIO110"),
-+ MTK_FUNCTION(1, "MSDC0_DAT7"),
-+ MTK_FUNCTION(4, "NLD7")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(111, "MSDC0_DAT6"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 111),
-+ MTK_FUNCTION(0, "GPIO111"),
-+ MTK_FUNCTION(1, "MSDC0_DAT6"),
-+ MTK_FUNCTION(4, "NLD6")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(112, "MSDC0_DAT5"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 112),
-+ MTK_FUNCTION(0, "GPIO112"),
-+ MTK_FUNCTION(1, "MSDC0_DAT5"),
-+ MTK_FUNCTION(4, "NLD4")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(113, "MSDC0_DAT4"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 113),
-+ MTK_FUNCTION(0, "GPIO113"),
-+ MTK_FUNCTION(1, "MSDC0_DAT4"),
-+ MTK_FUNCTION(4, "NLD3")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(114, "MSDC0_RSTB"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 114),
-+ MTK_FUNCTION(0, "GPIO114"),
-+ MTK_FUNCTION(1, "MSDC0_RSTB"),
-+ MTK_FUNCTION(4, "NLD0")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(115, "MSDC0_CMD"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 115),
-+ MTK_FUNCTION(0, "GPIO115"),
-+ MTK_FUNCTION(1, "MSDC0_CMD"),
-+ MTK_FUNCTION(4, "NALE")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(116, "MSDC0_CLK"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 116),
-+ MTK_FUNCTION(0, "GPIO116"),
-+ MTK_FUNCTION(1, "MSDC0_CLK"),
-+ MTK_FUNCTION(4, "NWEB")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(117, "MSDC0_DAT3"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 117),
-+ MTK_FUNCTION(0, "GPIO117"),
-+ MTK_FUNCTION(1, "MSDC0_DAT3"),
-+ MTK_FUNCTION(4, "NLD1")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(118, "MSDC0_DAT2"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 118),
-+ MTK_FUNCTION(0, "GPIO118"),
-+ MTK_FUNCTION(1, "MSDC0_DAT2"),
-+ MTK_FUNCTION(4, "NLD5")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(119, "MSDC0_DAT1"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 119),
-+ MTK_FUNCTION(0, "GPIO119"),
-+ MTK_FUNCTION(1, "MSDC0_DAT1"),
-+ MTK_FUNCTION(4, "NLD8")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(120, "MSDC0_DAT0"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 120),
-+ MTK_FUNCTION(0, "GPIO120"),
-+ MTK_FUNCTION(1, "MSDC0_DAT0"),
-+ MTK_FUNCTION(4, "WATCHDOG"),
-+ MTK_FUNCTION(5, "NLD2")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(121, "GPIO121"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 121),
-+ MTK_FUNCTION(0, "GPIO121")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(122, "GPIO122"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 122),
-+ MTK_FUNCTION(0, "GPIO122")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(123, "GPIO123"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 123),
-+ MTK_FUNCTION(0, "GPIO123")
-+ ),
-+ MTK_PIN(
-+ PINCTRL_PIN(124, "GPIO124"),
-+ NULL, "mt8516",
-+ MTK_EINT_FUNCTION(0, 124),
-+ MTK_FUNCTION(0, "GPIO124")
-+ ),
-+};
-+
-+#endif /* __PINCTRL_MTK_MT8516_H */
---- /dev/null
-+++ b/drivers/pinctrl/mediatek/pinctrl-paris.c
-@@ -0,0 +1,947 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * MediaTek Pinctrl Paris Driver, which implement the vendor per-pin
-+ * bindings for MediaTek SoC.
-+ *
-+ * Copyright (C) 2018 MediaTek Inc.
-+ * Author: Sean Wang <sean.wang@mediatek.com>
-+ * Zhiyong Tao <zhiyong.tao@mediatek.com>
-+ * Hongzhou.Yang <hongzhou.yang@mediatek.com>
-+ */
-+
-+#include <linux/gpio/driver.h>
-+#include <dt-bindings/pinctrl/mt65xx.h>
-+#include "pinctrl-paris.h"
-+
-+#define PINCTRL_PINCTRL_DEV KBUILD_MODNAME
-+
-+/* Custom pinconf parameters */
-+#define MTK_PIN_CONFIG_TDSEL (PIN_CONFIG_END + 1)
-+#define MTK_PIN_CONFIG_RDSEL (PIN_CONFIG_END + 2)
-+#define MTK_PIN_CONFIG_PU_ADV (PIN_CONFIG_END + 3)
-+#define MTK_PIN_CONFIG_PD_ADV (PIN_CONFIG_END + 4)
-+#define MTK_PIN_CONFIG_DRV_ADV (PIN_CONFIG_END + 5)
-+
-+static const struct pinconf_generic_params mtk_custom_bindings[] = {
-+ {"mediatek,tdsel", MTK_PIN_CONFIG_TDSEL, 0},
-+ {"mediatek,rdsel", MTK_PIN_CONFIG_RDSEL, 0},
-+ {"mediatek,pull-up-adv", MTK_PIN_CONFIG_PU_ADV, 1},
-+ {"mediatek,pull-down-adv", MTK_PIN_CONFIG_PD_ADV, 1},
-+ {"mediatek,drive-strength-adv", MTK_PIN_CONFIG_DRV_ADV, 2},
-+};
-+
-+#ifdef CONFIG_DEBUG_FS
-+static const struct pin_config_item mtk_conf_items[] = {
-+ PCONFDUMP(MTK_PIN_CONFIG_TDSEL, "tdsel", NULL, true),
-+ PCONFDUMP(MTK_PIN_CONFIG_RDSEL, "rdsel", NULL, true),
-+ PCONFDUMP(MTK_PIN_CONFIG_PU_ADV, "pu-adv", NULL, true),
-+ PCONFDUMP(MTK_PIN_CONFIG_PD_ADV, "pd-adv", NULL, true),
-+ PCONFDUMP(MTK_PIN_CONFIG_DRV_ADV, "drive-strength-adv", NULL, true),
-+};
-+#endif
-+
-+static const char * const mtk_gpio_functions[] = {
-+ "func0", "func1", "func2", "func3",
-+ "func4", "func5", "func6", "func7",
-+ "func8", "func9", "func10", "func11",
-+ "func12", "func13", "func14", "func15",
-+};
-+
-+static int mtk_pinmux_gpio_request_enable(struct pinctrl_dev *pctldev,
-+ struct pinctrl_gpio_range *range,
-+ unsigned int pin)
-+{
-+ struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
-+ const struct mtk_pin_desc *desc;
-+
-+ desc = (const struct mtk_pin_desc *)&hw->soc->pins[pin];
-+
-+ return mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_MODE,
-+ hw->soc->gpio_m);
-+}
-+
-+static int mtk_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev,
-+ struct pinctrl_gpio_range *range,
-+ unsigned int pin, bool input)
-+{
-+ struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
-+ const struct mtk_pin_desc *desc;
-+
-+ desc = (const struct mtk_pin_desc *)&hw->soc->pins[pin];
-+
-+ /* hardware would take 0 as input direction */
-+ return mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR, !input);
-+}
-+
-+static int mtk_pinconf_get(struct pinctrl_dev *pctldev,
-+ unsigned int pin, unsigned long *config)
-+{
-+ struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
-+ u32 param = pinconf_to_config_param(*config);
-+ int val, val2, err, reg, ret = 1;
-+ const struct mtk_pin_desc *desc;
-+
-+ desc = (const struct mtk_pin_desc *)&hw->soc->pins[pin];
-+
-+ switch (param) {
-+ case PIN_CONFIG_BIAS_DISABLE:
-+ if (hw->soc->bias_disable_get) {
-+ err = hw->soc->bias_disable_get(hw, desc, &ret);
-+ if (err)
-+ return err;
-+ } else {
-+ return -ENOTSUPP;
-+ }
-+ break;
-+ case PIN_CONFIG_BIAS_PULL_UP:
-+ if (hw->soc->bias_get) {
-+ err = hw->soc->bias_get(hw, desc, 1, &ret);
-+ if (err)
-+ return err;
-+ } else {
-+ return -ENOTSUPP;
-+ }
-+ break;
-+ case PIN_CONFIG_BIAS_PULL_DOWN:
-+ if (hw->soc->bias_get) {
-+ err = hw->soc->bias_get(hw, desc, 0, &ret);
-+ if (err)
-+ return err;
-+ } else {
-+ return -ENOTSUPP;
-+ }
-+ break;
-+ case PIN_CONFIG_SLEW_RATE:
-+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_SR, &val);
-+ if (err)
-+ return err;
-+
-+ if (!val)
-+ return -EINVAL;
-+
-+ break;
-+ case PIN_CONFIG_INPUT_ENABLE:
-+ case PIN_CONFIG_OUTPUT_ENABLE:
-+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DIR, &val);
-+ if (err)
-+ return err;
-+
-+ /* HW takes input mode as zero; output mode as non-zero */
-+ if ((val && param == PIN_CONFIG_INPUT_ENABLE) ||
-+ (!val && param == PIN_CONFIG_OUTPUT_ENABLE))
-+ return -EINVAL;
-+
-+ break;
-+ case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
-+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DIR, &val);
-+ if (err)
-+ return err;
-+
-+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_SMT, &val2);
-+ if (err)
-+ return err;
-+
-+ if (val || !val2)
-+ return -EINVAL;
-+
-+ break;
-+ case PIN_CONFIG_DRIVE_STRENGTH:
-+ if (hw->soc->drive_get) {
-+ err = hw->soc->drive_get(hw, desc, &ret);
-+ if (err)
-+ return err;
-+ } else {
-+ err = -ENOTSUPP;
-+ }
-+ break;
-+ case MTK_PIN_CONFIG_TDSEL:
-+ case MTK_PIN_CONFIG_RDSEL:
-+ reg = (param == MTK_PIN_CONFIG_TDSEL) ?
-+ PINCTRL_PIN_REG_TDSEL : PINCTRL_PIN_REG_RDSEL;
-+
-+ err = mtk_hw_get_value(hw, desc, reg, &val);
-+ if (err)
-+ return err;
-+
-+ ret = val;
-+
-+ break;
-+ case MTK_PIN_CONFIG_PU_ADV:
-+ case MTK_PIN_CONFIG_PD_ADV:
-+ if (hw->soc->adv_pull_get) {
-+ bool pullup;
-+
-+ pullup = param == MTK_PIN_CONFIG_PU_ADV;
-+ err = hw->soc->adv_pull_get(hw, desc, pullup, &ret);
-+ if (err)
-+ return err;
-+ } else {
-+ return -ENOTSUPP;
-+ }
-+ break;
-+ case MTK_PIN_CONFIG_DRV_ADV:
-+ if (hw->soc->adv_drive_get) {
-+ err = hw->soc->adv_drive_get(hw, desc, &ret);
-+ if (err)
-+ return err;
-+ } else {
-+ return -ENOTSUPP;
-+ }
-+ break;
-+ default:
-+ return -ENOTSUPP;
-+ }
-+
-+ *config = pinconf_to_config_packed(param, ret);
-+
-+ return 0;
-+}
-+
-+static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
-+ enum pin_config_param param,
-+ enum pin_config_param arg)
-+{
-+ struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
-+ const struct mtk_pin_desc *desc;
-+ int err = 0;
-+ u32 reg;
-+
-+ desc = (const struct mtk_pin_desc *)&hw->soc->pins[pin];
-+
-+ switch ((u32)param) {
-+ case PIN_CONFIG_BIAS_DISABLE:
-+ if (hw->soc->bias_disable_set) {
-+ err = hw->soc->bias_disable_set(hw, desc);
-+ if (err)
-+ return err;
-+ } else {
-+ return -ENOTSUPP;
-+ }
-+ break;
-+ case PIN_CONFIG_BIAS_PULL_UP:
-+ if (hw->soc->bias_set) {
-+ err = hw->soc->bias_set(hw, desc, 1);
-+ if (err)
-+ return err;
-+ } else {
-+ return -ENOTSUPP;
-+ }
-+ break;
-+ case PIN_CONFIG_BIAS_PULL_DOWN:
-+ if (hw->soc->bias_set) {
-+ err = hw->soc->bias_set(hw, desc, 0);
-+ if (err)
-+ return err;
-+ } else {
-+ return -ENOTSUPP;
-+ }
-+ break;
-+ case PIN_CONFIG_OUTPUT_ENABLE:
-+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_SMT,
-+ MTK_DISABLE);
-+ if (err)
-+ goto err;
-+
-+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR,
-+ MTK_OUTPUT);
-+ if (err)
-+ goto err;
-+ break;
-+ case PIN_CONFIG_INPUT_ENABLE:
-+ if (hw->soc->ies_present) {
-+ mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_IES,
-+ MTK_ENABLE);
-+ }
-+
-+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR,
-+ MTK_INPUT);
-+ if (err)
-+ goto err;
-+ break;
-+ case PIN_CONFIG_SLEW_RATE:
-+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_SR,
-+ arg);
-+ if (err)
-+ goto err;
-+
-+ break;
-+ case PIN_CONFIG_OUTPUT:
-+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR,
-+ MTK_OUTPUT);
-+ if (err)
-+ goto err;
-+
-+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DO,
-+ arg);
-+ if (err)
-+ goto err;
-+ break;
-+ case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
-+ /* arg = 1: Input mode & SMT enable ;
-+ * arg = 0: Output mode & SMT disable
-+ */
-+ arg = arg ? 2 : 1;
-+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DIR,
-+ arg & 1);
-+ if (err)
-+ goto err;
-+
-+ err = mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_SMT,
-+ !!(arg & 2));
-+ if (err)
-+ goto err;
-+ break;
-+ case PIN_CONFIG_DRIVE_STRENGTH:
-+ if (hw->soc->drive_set) {
-+ err = hw->soc->drive_set(hw, desc, arg);
-+ if (err)
-+ return err;
-+ } else {
-+ return -ENOTSUPP;
-+ }
-+ break;
-+ case MTK_PIN_CONFIG_TDSEL:
-+ case MTK_PIN_CONFIG_RDSEL:
-+ reg = (param == MTK_PIN_CONFIG_TDSEL) ?
-+ PINCTRL_PIN_REG_TDSEL : PINCTRL_PIN_REG_RDSEL;
-+
-+ err = mtk_hw_set_value(hw, desc, reg, arg);
-+ if (err)
-+ goto err;
-+ break;
-+ case MTK_PIN_CONFIG_PU_ADV:
-+ case MTK_PIN_CONFIG_PD_ADV:
-+ if (hw->soc->adv_pull_set) {
-+ bool pullup;
-+
-+ pullup = param == MTK_PIN_CONFIG_PU_ADV;
-+ err = hw->soc->adv_pull_set(hw, desc, pullup,
-+ arg);
-+ if (err)
-+ return err;
-+ } else {
-+ return -ENOTSUPP;
-+ }
-+ break;
-+ case MTK_PIN_CONFIG_DRV_ADV:
-+ if (hw->soc->adv_drive_set) {
-+ err = hw->soc->adv_drive_set(hw, desc, arg);
-+ if (err)
-+ return err;
-+ } else {
-+ return -ENOTSUPP;
-+ }
-+ break;
-+ default:
-+ err = -ENOTSUPP;
-+ }
-+
-+err:
-+ return err;
-+}
-+
-+static struct mtk_pinctrl_group *
-+mtk_pctrl_find_group_by_pin(struct mtk_pinctrl *hw, u32 pin)
-+{
-+ int i;
-+
-+ for (i = 0; i < hw->soc->ngrps; i++) {
-+ struct mtk_pinctrl_group *grp = hw->groups + i;
-+
-+ if (grp->pin == pin)
-+ return grp;
-+ }
-+
-+ return NULL;
-+}
-+
-+static const struct mtk_func_desc *
-+mtk_pctrl_find_function_by_pin(struct mtk_pinctrl *hw, u32 pin_num, u32 fnum)
-+{
-+ const struct mtk_pin_desc *pin = hw->soc->pins + pin_num;
-+ const struct mtk_func_desc *func = pin->funcs;
-+
-+ while (func && func->name) {
-+ if (func->muxval == fnum)
-+ return func;
-+ func++;
-+ }
-+
-+ return NULL;
-+}
-+
-+static bool mtk_pctrl_is_function_valid(struct mtk_pinctrl *hw, u32 pin_num,
-+ u32 fnum)
-+{
-+ int i;
-+
-+ for (i = 0; i < hw->soc->npins; i++) {
-+ const struct mtk_pin_desc *pin = hw->soc->pins + i;
-+
-+ if (pin->number == pin_num) {
-+ const struct mtk_func_desc *func = pin->funcs;
-+
-+ while (func && func->name) {
-+ if (func->muxval == fnum)
-+ return true;
-+ func++;
-+ }
-+
-+ break;
-+ }
-+ }
-+
-+ return false;
-+}
-+
-+static int mtk_pctrl_dt_node_to_map_func(struct mtk_pinctrl *pctl,
-+ u32 pin, u32 fnum,
-+ struct mtk_pinctrl_group *grp,
-+ struct pinctrl_map **map,
-+ unsigned *reserved_maps,
-+ unsigned *num_maps)
-+{
-+ bool ret;
-+
-+ if (*num_maps == *reserved_maps)
-+ return -ENOSPC;
-+
-+ (*map)[*num_maps].type = PIN_MAP_TYPE_MUX_GROUP;
-+ (*map)[*num_maps].data.mux.group = grp->name;
-+
-+ ret = mtk_pctrl_is_function_valid(pctl, pin, fnum);
-+ if (!ret) {
-+ dev_err(pctl->dev, "invalid function %d on pin %d .\n",
-+ fnum, pin);
-+ return -EINVAL;
-+ }
-+
-+ (*map)[*num_maps].data.mux.function = mtk_gpio_functions[fnum];
-+ (*num_maps)++;
-+
-+ return 0;
-+}
-+
-+static int mtk_pctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev,
-+ struct device_node *node,
-+ struct pinctrl_map **map,
-+ unsigned *reserved_maps,
-+ unsigned *num_maps)
-+{
-+ struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
-+ int num_pins, num_funcs, maps_per_pin, i, err;
-+ struct mtk_pinctrl_group *grp;
-+ unsigned int num_configs;
-+ bool has_config = false;
-+ unsigned long *configs;
-+ u32 pinfunc, pin, func;
-+ struct property *pins;
-+ unsigned reserve = 0;
-+
-+ pins = of_find_property(node, "pinmux", NULL);
-+ if (!pins) {
-+ dev_err(hw->dev, "missing pins property in node %pOFn .\n",
-+ node);
-+ return -EINVAL;
-+ }
-+
-+ err = pinconf_generic_parse_dt_config(node, pctldev, &configs,
-+ &num_configs);
-+ if (err)
-+ return err;
-+
-+ if (num_configs)
-+ has_config = true;
-+
-+ num_pins = pins->length / sizeof(u32);
-+ num_funcs = num_pins;
-+ maps_per_pin = 0;
-+ if (num_funcs)
-+ maps_per_pin++;
-+ if (has_config && num_pins >= 1)
-+ maps_per_pin++;
-+
-+ if (!num_pins || !maps_per_pin) {
-+ err = -EINVAL;
-+ goto exit;
-+ }
-+
-+ reserve = num_pins * maps_per_pin;
-+
-+ err = pinctrl_utils_reserve_map(pctldev, map, reserved_maps, num_maps,
-+ reserve);
-+ if (err < 0)
-+ goto exit;
-+
-+ for (i = 0; i < num_pins; i++) {
-+ err = of_property_read_u32_index(node, "pinmux", i, &pinfunc);
-+ if (err)
-+ goto exit;
-+
-+ pin = MTK_GET_PIN_NO(pinfunc);
-+ func = MTK_GET_PIN_FUNC(pinfunc);
-+
-+ if (pin >= hw->soc->npins ||
-+ func >= ARRAY_SIZE(mtk_gpio_functions)) {
-+ dev_err(hw->dev, "invalid pins value.\n");
-+ err = -EINVAL;
-+ goto exit;
-+ }
-+
-+ grp = mtk_pctrl_find_group_by_pin(hw, pin);
-+ if (!grp) {
-+ dev_err(hw->dev, "unable to match pin %d to group\n",
-+ pin);
-+ err = -EINVAL;
-+ goto exit;
-+ }
-+
-+ err = mtk_pctrl_dt_node_to_map_func(hw, pin, func, grp, map,
-+ reserved_maps, num_maps);
-+ if (err < 0)
-+ goto exit;
-+
-+ if (has_config) {
-+ err = pinctrl_utils_add_map_configs(pctldev, map,
-+ reserved_maps,
-+ num_maps,
-+ grp->name,
-+ configs,
-+ num_configs,
-+ PIN_MAP_TYPE_CONFIGS_GROUP);
-+ if (err < 0)
-+ goto exit;
-+ }
-+ }
-+
-+ err = 0;
-+
-+exit:
-+ kfree(configs);
-+ return err;
-+}
-+
-+static int mtk_pctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
-+ struct device_node *np_config,
-+ struct pinctrl_map **map,
-+ unsigned *num_maps)
-+{
-+ struct device_node *np;
-+ unsigned reserved_maps;
-+ int ret;
-+
-+ *map = NULL;
-+ *num_maps = 0;
-+ reserved_maps = 0;
-+
-+ for_each_child_of_node(np_config, np) {
-+ ret = mtk_pctrl_dt_subnode_to_map(pctldev, np, map,
-+ &reserved_maps,
-+ num_maps);
-+ if (ret < 0) {
-+ pinctrl_utils_free_map(pctldev, *map, *num_maps);
-+ of_node_put(np);
-+ return ret;
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+static int mtk_pctrl_get_groups_count(struct pinctrl_dev *pctldev)
-+{
-+ struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
-+
-+ return hw->soc->ngrps;
-+}
-+
-+static const char *mtk_pctrl_get_group_name(struct pinctrl_dev *pctldev,
-+ unsigned group)
-+{
-+ struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
-+
-+ return hw->groups[group].name;
-+}
-+
-+static int mtk_pctrl_get_group_pins(struct pinctrl_dev *pctldev,
-+ unsigned group, const unsigned **pins,
-+ unsigned *num_pins)
-+{
-+ struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
-+
-+ *pins = (unsigned *)&hw->groups[group].pin;
-+ *num_pins = 1;
-+
-+ return 0;
-+}
-+
-+static const struct pinctrl_ops mtk_pctlops = {
-+ .dt_node_to_map = mtk_pctrl_dt_node_to_map,
-+ .dt_free_map = pinctrl_utils_free_map,
-+ .get_groups_count = mtk_pctrl_get_groups_count,
-+ .get_group_name = mtk_pctrl_get_group_name,
-+ .get_group_pins = mtk_pctrl_get_group_pins,
-+};
-+
-+static int mtk_pmx_get_funcs_cnt(struct pinctrl_dev *pctldev)
-+{
-+ return ARRAY_SIZE(mtk_gpio_functions);
-+}
-+
-+static const char *mtk_pmx_get_func_name(struct pinctrl_dev *pctldev,
-+ unsigned selector)
-+{
-+ return mtk_gpio_functions[selector];
-+}
-+
-+static int mtk_pmx_get_func_groups(struct pinctrl_dev *pctldev,
-+ unsigned function,
-+ const char * const **groups,
-+ unsigned * const num_groups)
-+{
-+ struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
-+
-+ *groups = hw->grp_names;
-+ *num_groups = hw->soc->ngrps;
-+
-+ return 0;
-+}
-+
-+static int mtk_pmx_set_mux(struct pinctrl_dev *pctldev,
-+ unsigned function,
-+ unsigned group)
-+{
-+ struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
-+ struct mtk_pinctrl_group *grp = hw->groups + group;
-+ const struct mtk_func_desc *desc_func;
-+ const struct mtk_pin_desc *desc;
-+ bool ret;
-+
-+ ret = mtk_pctrl_is_function_valid(hw, grp->pin, function);
-+ if (!ret) {
-+ dev_err(hw->dev, "invalid function %d on group %d .\n",
-+ function, group);
-+ return -EINVAL;
-+ }
-+
-+ desc_func = mtk_pctrl_find_function_by_pin(hw, grp->pin, function);
-+ if (!desc_func)
-+ return -EINVAL;
-+
-+ desc = (const struct mtk_pin_desc *)&hw->soc->pins[grp->pin];
-+ mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_MODE, desc_func->muxval);
-+
-+ return 0;
-+}
-+
-+static const struct pinmux_ops mtk_pmxops = {
-+ .get_functions_count = mtk_pmx_get_funcs_cnt,
-+ .get_function_name = mtk_pmx_get_func_name,
-+ .get_function_groups = mtk_pmx_get_func_groups,
-+ .set_mux = mtk_pmx_set_mux,
-+ .gpio_set_direction = mtk_pinmux_gpio_set_direction,
-+ .gpio_request_enable = mtk_pinmux_gpio_request_enable,
-+};
-+
-+static int mtk_pconf_group_get(struct pinctrl_dev *pctldev, unsigned group,
-+ unsigned long *config)
-+{
-+ struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
-+
-+ *config = hw->groups[group].config;
-+
-+ return 0;
-+}
-+
-+static int mtk_pconf_group_set(struct pinctrl_dev *pctldev, unsigned group,
-+ unsigned long *configs, unsigned num_configs)
-+{
-+ struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
-+ struct mtk_pinctrl_group *grp = &hw->groups[group];
-+ int i, ret;
-+
-+ for (i = 0; i < num_configs; i++) {
-+ ret = mtk_pinconf_set(pctldev, grp->pin,
-+ pinconf_to_config_param(configs[i]),
-+ pinconf_to_config_argument(configs[i]));
-+ if (ret < 0)
-+ return ret;
-+
-+ grp->config = configs[i];
-+ }
-+
-+ return 0;
-+}
-+
-+static const struct pinconf_ops mtk_confops = {
-+ .pin_config_get = mtk_pinconf_get,
-+ .pin_config_group_get = mtk_pconf_group_get,
-+ .pin_config_group_set = mtk_pconf_group_set,
-+};
-+
-+static struct pinctrl_desc mtk_desc = {
-+ .name = PINCTRL_PINCTRL_DEV,
-+ .pctlops = &mtk_pctlops,
-+ .pmxops = &mtk_pmxops,
-+ .confops = &mtk_confops,
-+ .owner = THIS_MODULE,
-+};
-+
-+static int mtk_gpio_get_direction(struct gpio_chip *chip, unsigned int gpio)
-+{
-+ struct mtk_pinctrl *hw = gpiochip_get_data(chip);
-+ const struct mtk_pin_desc *desc;
-+ int value, err;
-+
-+ desc = (const struct mtk_pin_desc *)&hw->soc->pins[gpio];
-+
-+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DIR, &value);
-+ if (err)
-+ return err;
-+
-+ return !value;
-+}
-+
-+static int mtk_gpio_get(struct gpio_chip *chip, unsigned int gpio)
-+{
-+ struct mtk_pinctrl *hw = gpiochip_get_data(chip);
-+ const struct mtk_pin_desc *desc;
-+ int value, err;
-+
-+ desc = (const struct mtk_pin_desc *)&hw->soc->pins[gpio];
-+
-+ err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DI, &value);
-+ if (err)
-+ return err;
-+
-+ return !!value;
-+}
-+
-+static void mtk_gpio_set(struct gpio_chip *chip, unsigned int gpio, int value)
-+{
-+ struct mtk_pinctrl *hw = gpiochip_get_data(chip);
-+ const struct mtk_pin_desc *desc;
-+
-+ desc = (const struct mtk_pin_desc *)&hw->soc->pins[gpio];
-+
-+ mtk_hw_set_value(hw, desc, PINCTRL_PIN_REG_DO, !!value);
-+}
-+
-+static int mtk_gpio_direction_input(struct gpio_chip *chip, unsigned int gpio)
-+{
-+ return pinctrl_gpio_direction_input(chip->base + gpio);
-+}
-+
-+static int mtk_gpio_direction_output(struct gpio_chip *chip, unsigned int gpio,
-+ int value)
-+{
-+ mtk_gpio_set(chip, gpio, value);
-+
-+ return pinctrl_gpio_direction_output(chip->base + gpio);
-+}
-+
-+static int mtk_gpio_to_irq(struct gpio_chip *chip, unsigned int offset)
-+{
-+ struct mtk_pinctrl *hw = gpiochip_get_data(chip);
-+ const struct mtk_pin_desc *desc;
-+
-+ if (!hw->eint)
-+ return -ENOTSUPP;
-+
-+ desc = (const struct mtk_pin_desc *)&hw->soc->pins[offset];
-+
-+ if (desc->eint.eint_n == EINT_NA)
-+ return -ENOTSUPP;
-+
-+ return mtk_eint_find_irq(hw->eint, desc->eint.eint_n);
-+}
-+
-+static int mtk_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
-+ unsigned long config)
-+{
-+ struct mtk_pinctrl *hw = gpiochip_get_data(chip);
-+ const struct mtk_pin_desc *desc;
-+ u32 debounce;
-+
-+ desc = (const struct mtk_pin_desc *)&hw->soc->pins[offset];
-+
-+ if (!hw->eint ||
-+ pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE ||
-+ desc->eint.eint_n == EINT_NA)
-+ return -ENOTSUPP;
-+
-+ debounce = pinconf_to_config_argument(config);
-+
-+ return mtk_eint_set_debounce(hw->eint, desc->eint.eint_n, debounce);
-+}
-+
-+static int mtk_build_gpiochip(struct mtk_pinctrl *hw, struct device_node *np)
-+{
-+ struct gpio_chip *chip = &hw->chip;
-+ int ret;
-+
-+ chip->label = PINCTRL_PINCTRL_DEV;
-+ chip->parent = hw->dev;
-+ chip->request = gpiochip_generic_request;
-+ chip->free = gpiochip_generic_free;
-+ chip->get_direction = mtk_gpio_get_direction;
-+ chip->direction_input = mtk_gpio_direction_input;
-+ chip->direction_output = mtk_gpio_direction_output;
-+ chip->get = mtk_gpio_get;
-+ chip->set = mtk_gpio_set;
-+ chip->to_irq = mtk_gpio_to_irq,
-+ chip->set_config = mtk_gpio_set_config,
-+ chip->base = -1;
-+ chip->ngpio = hw->soc->npins;
-+ chip->of_node = np;
-+ chip->of_gpio_n_cells = 2;
-+
-+ ret = gpiochip_add_data(chip, hw);
-+ if (ret < 0)
-+ return ret;
-+
-+ return 0;
-+}
-+
-+static int mtk_pctrl_build_state(struct platform_device *pdev)
-+{
-+ struct mtk_pinctrl *hw = platform_get_drvdata(pdev);
-+ int i;
-+
-+ /* Allocate groups */
-+ hw->groups = devm_kmalloc_array(&pdev->dev, hw->soc->ngrps,
-+ sizeof(*hw->groups), GFP_KERNEL);
-+ if (!hw->groups)
-+ return -ENOMEM;
-+
-+ /* We assume that one pin is one group, use pin name as group name. */
-+ hw->grp_names = devm_kmalloc_array(&pdev->dev, hw->soc->ngrps,
-+ sizeof(*hw->grp_names), GFP_KERNEL);
-+ if (!hw->grp_names)
-+ return -ENOMEM;
-+
-+ for (i = 0; i < hw->soc->npins; i++) {
-+ const struct mtk_pin_desc *pin = hw->soc->pins + i;
-+ struct mtk_pinctrl_group *group = hw->groups + i;
-+
-+ group->name = pin->name;
-+ group->pin = pin->number;
-+
-+ hw->grp_names[i] = pin->name;
-+ }
-+
-+ return 0;
-+}
-+
-+int mtk_paris_pinctrl_probe(struct platform_device *pdev,
-+ const struct mtk_pin_soc *soc)
-+{
-+ struct pinctrl_pin_desc *pins;
-+ struct mtk_pinctrl *hw;
-+ struct resource *res;
-+ int err, i;
-+
-+ hw = devm_kzalloc(&pdev->dev, sizeof(*hw), GFP_KERNEL);
-+ if (!hw)
-+ return -ENOMEM;
-+
-+ platform_set_drvdata(pdev, hw);
-+ hw->soc = soc;
-+ hw->dev = &pdev->dev;
-+
-+ if (!hw->soc->nbase_names) {
-+ dev_err(&pdev->dev,
-+ "SoC should be assigned at least one register base\n");
-+ return -EINVAL;
-+ }
-+
-+ hw->base = devm_kmalloc_array(&pdev->dev, hw->soc->nbase_names,
-+ sizeof(*hw->base), GFP_KERNEL);
-+ if (!hw->base)
-+ return -ENOMEM;
-+
-+ for (i = 0; i < hw->soc->nbase_names; i++) {
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-+ hw->soc->base_names[i]);
-+ if (!res) {
-+ dev_err(&pdev->dev, "missing IO resource\n");
-+ return -ENXIO;
-+ }
-+
-+ hw->base[i] = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(hw->base[i]))
-+ return PTR_ERR(hw->base[i]);
-+ }
-+
-+ hw->nbase = hw->soc->nbase_names;
-+
-+ err = mtk_pctrl_build_state(pdev);
-+ if (err) {
-+ dev_err(&pdev->dev, "build state failed: %d\n", err);
-+ return -EINVAL;
-+ }
-+
-+ /* Copy from internal struct mtk_pin_desc to register to the core */
-+ pins = devm_kmalloc_array(&pdev->dev, hw->soc->npins, sizeof(*pins),
-+ GFP_KERNEL);
-+ if (!pins)
-+ return -ENOMEM;
-+
-+ for (i = 0; i < hw->soc->npins; i++) {
-+ pins[i].number = hw->soc->pins[i].number;
-+ pins[i].name = hw->soc->pins[i].name;
-+ }
-+
-+ /* Setup pins descriptions per SoC types */
-+ mtk_desc.pins = (const struct pinctrl_pin_desc *)pins;
-+ mtk_desc.npins = hw->soc->npins;
-+ mtk_desc.num_custom_params = ARRAY_SIZE(mtk_custom_bindings);
-+ mtk_desc.custom_params = mtk_custom_bindings;
-+#ifdef CONFIG_DEBUG_FS
-+ mtk_desc.custom_conf_items = mtk_conf_items;
-+#endif
-+
-+ err = devm_pinctrl_register_and_init(&pdev->dev, &mtk_desc, hw,
-+ &hw->pctrl);
-+ if (err)
-+ return err;
-+
-+ err = pinctrl_enable(hw->pctrl);
-+ if (err)
-+ return err;
-+
-+ err = mtk_build_eint(hw, pdev);
-+ if (err)
-+ dev_warn(&pdev->dev,
-+ "Failed to add EINT, but pinctrl still can work\n");
-+
-+ /* Build gpiochip should be after pinctrl_enable is done */
-+ err = mtk_build_gpiochip(hw, pdev->dev.of_node);
-+ if (err) {
-+ dev_err(&pdev->dev, "Failed to add gpio_chip\n");
-+ return err;
-+ }
-+
-+ platform_set_drvdata(pdev, hw);
-+
-+ return 0;
-+}
-+
-+static int mtk_paris_pinctrl_suspend(struct device *device)
-+{
-+ struct mtk_pinctrl *pctl = dev_get_drvdata(device);
-+
-+ return mtk_eint_do_suspend(pctl->eint);
-+}
-+
-+static int mtk_paris_pinctrl_resume(struct device *device)
-+{
-+ struct mtk_pinctrl *pctl = dev_get_drvdata(device);
-+
-+ return mtk_eint_do_resume(pctl->eint);
-+}
-+
-+const struct dev_pm_ops mtk_paris_pinctrl_pm_ops = {
-+ .suspend_noirq = mtk_paris_pinctrl_suspend,
-+ .resume_noirq = mtk_paris_pinctrl_resume,
-+};
---- /dev/null
-+++ b/drivers/pinctrl/mediatek/pinctrl-paris.h
-@@ -0,0 +1,65 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+/*
-+ * Copyright (C) 2018 MediaTek Inc.
-+ *
-+ * Author: Sean Wang <sean.wang@mediatek.com>
-+ * Zhiyong Tao <zhiyong.tao@mediatek.com>
-+ * Hongzhou.Yang <hongzhou.yang@mediatek.com>
-+ */
-+#ifndef __PINCTRL_PARIS_H
-+#define __PINCTRL_PARIS_H
-+
-+#include <linux/io.h>
-+#include <linux/init.h>
-+#include <linux/of.h>
-+#include <linux/of_platform.h>
-+#include <linux/platform_device.h>
-+#include <linux/pinctrl/pinctrl.h>
-+#include <linux/pinctrl/pinmux.h>
-+#include <linux/pinctrl/pinconf.h>
-+#include <linux/pinctrl/pinconf-generic.h>
-+
-+#include "../core.h"
-+#include "../pinconf.h"
-+#include "../pinctrl-utils.h"
-+#include "../pinmux.h"
-+#include "mtk-eint.h"
-+#include "pinctrl-mtk-common-v2.h"
-+
-+#define MTK_RANGE(_a) { .range = (_a), .nranges = ARRAY_SIZE(_a), }
-+
-+#define MTK_EINT_FUNCTION(_eintmux, _eintnum) \
-+ { \
-+ .eint_m = _eintmux, \
-+ .eint_n = _eintnum, \
-+ }
-+
-+#define MTK_FUNCTION(_val, _name) \
-+ { \
-+ .muxval = _val, \
-+ .name = _name, \
-+ }
-+
-+#define MTK_PIN(_number, _name, _eint, _drv_n, ...) { \
-+ .number = _number, \
-+ .name = _name, \
-+ .eint = _eint, \
-+ .drv_n = _drv_n, \
-+ .funcs = (struct mtk_func_desc[]){ \
-+ __VA_ARGS__, { } }, \
-+ }
-+
-+#define PINCTRL_PIN_GROUP(name, id) \
-+ { \
-+ name, \
-+ id##_pins, \
-+ ARRAY_SIZE(id##_pins), \
-+ id##_funcs, \
-+ }
-+
-+int mtk_paris_pinctrl_probe(struct platform_device *pdev,
-+ const struct mtk_pin_soc *soc);
-+
-+extern const struct dev_pm_ops mtk_paris_pinctrl_pm_ops;
-+
-+#endif /* __PINCTRL_PARIS_H */
+++ /dev/null
-From 9cca9b3e55989f8b227d05897877648d67910a6d Mon Sep 17 00:00:00 2001
-From: Guochun Mao <guochun.mao@mediatek.com>
-Date: Wed, 16 Jan 2019 10:12:04 +0800
-Subject: [PATCH] mtd: spi-nor: mtk-quadspi: add SNOR_HWCAPS_READ to
- spi_nor_hwcaps mask
-
-SNOR_HWCAPS_READ should be supported by this controller, so add this
-flag to spi_nor_hwcaps mask.
-
-Signed-off-by: Guochun Mao <guochun.mao@mediatek.com>
-Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
-Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
-Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
----
- drivers/mtd/spi-nor/mtk-quadspi.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/spi-nor/mtk-quadspi.c
-+++ b/drivers/mtd/spi-nor/mtk-quadspi.c
-@@ -431,7 +431,8 @@ static int mtk_nor_init(struct mtk_nor *
- struct device_node *flash_node)
- {
- const struct spi_nor_hwcaps hwcaps = {
-- .mask = SNOR_HWCAPS_READ_FAST |
-+ .mask = SNOR_HWCAPS_READ |
-+ SNOR_HWCAPS_READ_FAST |
- SNOR_HWCAPS_READ_1_1_2 |
- SNOR_HWCAPS_PP,
- };
+++ /dev/null
---- a/drivers/clk/clk-devres.c
-+++ b/drivers/clk/clk-devres.c
-@@ -34,6 +34,17 @@ struct clk *devm_clk_get(struct device *
- }
- EXPORT_SYMBOL(devm_clk_get);
-
-+struct clk *devm_clk_get_optional(struct device *dev, const char *id)
-+{
-+ struct clk *clk = devm_clk_get(dev, id);
-+
-+ if (clk == ERR_PTR(-ENOENT))
-+ return NULL;
-+
-+ return clk;
-+}
-+EXPORT_SYMBOL(devm_clk_get_optional);
-+
- struct clk_bulk_devres {
- struct clk_bulk_data *clks;
- int num_clks;
---- a/drivers/pci/controller/pcie-mediatek.c
-+++ b/drivers/pci/controller/pcie-mediatek.c
-@@ -15,6 +15,7 @@
- #include <linux/irqdomain.h>
- #include <linux/kernel.h>
- #include <linux/msi.h>
-+#include <linux/module.h>
- #include <linux/of_address.h>
- #include <linux/of_pci.h>
- #include <linux/of_platform.h>
-@@ -167,6 +168,7 @@ struct mtk_pcie_soc {
- * @phy: pointer to PHY control block
- * @lane: lane count
- * @slot: port slot
-+ * @irq: GIC irq
- * @irq_domain: legacy INTx IRQ domain
- * @inner_domain: inner IRQ domain
- * @msi_domain: MSI IRQ domain
-@@ -187,6 +189,7 @@ struct mtk_pcie_port {
- struct phy *phy;
- u32 lane;
- u32 slot;
-+ int irq;
- struct irq_domain *irq_domain;
- struct irq_domain *inner_domain;
- struct irq_domain *msi_domain;
-@@ -230,10 +233,8 @@ static void mtk_pcie_subsys_powerdown(st
-
- clk_disable_unprepare(pcie->free_ck);
-
-- if (dev->pm_domain) {
-- pm_runtime_put_sync(dev);
-- pm_runtime_disable(dev);
-- }
-+ pm_runtime_put_sync(dev);
-+ pm_runtime_disable(dev);
- }
-
- static void mtk_pcie_port_free(struct mtk_pcie_port *port)
-@@ -537,6 +538,27 @@ static void mtk_pcie_enable_msi(struct m
- writel(val, port->base + PCIE_INT_MASK);
- }
-
-+static void mtk_pcie_irq_teardown(struct mtk_pcie *pcie)
-+{
-+ struct mtk_pcie_port *port, *tmp;
-+
-+ list_for_each_entry_safe(port, tmp, &pcie->ports, list) {
-+ irq_set_chained_handler_and_data(port->irq, NULL, NULL);
-+
-+ if (port->irq_domain)
-+ irq_domain_remove(port->irq_domain);
-+
-+ if (IS_ENABLED(CONFIG_PCI_MSI)) {
-+ if (port->msi_domain)
-+ irq_domain_remove(port->msi_domain);
-+ if (port->inner_domain)
-+ irq_domain_remove(port->inner_domain);
-+ }
-+
-+ irq_dispose_mapping(port->irq);
-+ }
-+}
-+
- static int mtk_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
- irq_hw_number_t hwirq)
- {
-@@ -566,6 +588,7 @@ static int mtk_pcie_init_irq_domain(stru
-
- port->irq_domain = irq_domain_add_linear(pcie_intc_node, PCI_NUM_INTX,
- &intx_domain_ops, port);
-+ of_node_put(pcie_intc_node);
- if (!port->irq_domain) {
- dev_err(dev, "failed to get INTx IRQ domain\n");
- return -ENODEV;
-@@ -627,7 +650,7 @@ static int mtk_pcie_setup_irq(struct mtk
- struct mtk_pcie *pcie = port->pcie;
- struct device *dev = pcie->dev;
- struct platform_device *pdev = to_platform_device(dev);
-- int err, irq;
-+ int err;
-
- err = mtk_pcie_init_irq_domain(port, node);
- if (err) {
-@@ -635,8 +658,9 @@ static int mtk_pcie_setup_irq(struct mtk
- return err;
- }
-
-- irq = platform_get_irq(pdev, port->slot);
-- irq_set_chained_handler_and_data(irq, mtk_pcie_intr_handler, port);
-+ port->irq = platform_get_irq(pdev, port->slot);
-+ irq_set_chained_handler_and_data(port->irq,
-+ mtk_pcie_intr_handler, port);
-
- return 0;
- }
-@@ -912,49 +936,29 @@ static int mtk_pcie_parse_port(struct mt
-
- /* sys_ck might be divided into the following parts in some chips */
- snprintf(name, sizeof(name), "ahb_ck%d", slot);
-- port->ahb_ck = devm_clk_get(dev, name);
-- if (IS_ERR(port->ahb_ck)) {
-- if (PTR_ERR(port->ahb_ck) == -EPROBE_DEFER)
-- return -EPROBE_DEFER;
--
-- port->ahb_ck = NULL;
-- }
-+ port->ahb_ck = devm_clk_get_optional(dev, name);
-+ if (IS_ERR(port->ahb_ck))
-+ return PTR_ERR(port->ahb_ck);
-
- snprintf(name, sizeof(name), "axi_ck%d", slot);
-- port->axi_ck = devm_clk_get(dev, name);
-- if (IS_ERR(port->axi_ck)) {
-- if (PTR_ERR(port->axi_ck) == -EPROBE_DEFER)
-- return -EPROBE_DEFER;
--
-- port->axi_ck = NULL;
-- }
-+ port->axi_ck = devm_clk_get_optional(dev, name);
-+ if (IS_ERR(port->axi_ck))
-+ return PTR_ERR(port->axi_ck);
-
- snprintf(name, sizeof(name), "aux_ck%d", slot);
-- port->aux_ck = devm_clk_get(dev, name);
-- if (IS_ERR(port->aux_ck)) {
-- if (PTR_ERR(port->aux_ck) == -EPROBE_DEFER)
-- return -EPROBE_DEFER;
--
-- port->aux_ck = NULL;
-- }
-+ port->aux_ck = devm_clk_get_optional(dev, name);
-+ if (IS_ERR(port->aux_ck))
-+ return PTR_ERR(port->aux_ck);
-
- snprintf(name, sizeof(name), "obff_ck%d", slot);
-- port->obff_ck = devm_clk_get(dev, name);
-- if (IS_ERR(port->obff_ck)) {
-- if (PTR_ERR(port->obff_ck) == -EPROBE_DEFER)
-- return -EPROBE_DEFER;
--
-- port->obff_ck = NULL;
-- }
-+ port->obff_ck = devm_clk_get_optional(dev, name);
-+ if (IS_ERR(port->obff_ck))
-+ return PTR_ERR(port->obff_ck);
-
- snprintf(name, sizeof(name), "pipe_ck%d", slot);
-- port->pipe_ck = devm_clk_get(dev, name);
-- if (IS_ERR(port->pipe_ck)) {
-- if (PTR_ERR(port->pipe_ck) == -EPROBE_DEFER)
-- return -EPROBE_DEFER;
--
-- port->pipe_ck = NULL;
-- }
-+ port->pipe_ck = devm_clk_get_optional(dev, name);
-+ if (IS_ERR(port->pipe_ck))
-+ return PTR_ERR(port->pipe_ck);
-
- snprintf(name, sizeof(name), "pcie-rst%d", slot);
- port->reset = devm_reset_control_get_optional_exclusive(dev, name);
-@@ -1007,10 +1011,8 @@ static int mtk_pcie_subsys_powerup(struc
- pcie->free_ck = NULL;
- }
-
-- if (dev->pm_domain) {
-- pm_runtime_enable(dev);
-- pm_runtime_get_sync(dev);
-- }
-+ pm_runtime_enable(dev);
-+ pm_runtime_get_sync(dev);
-
- /* enable top level clock */
- err = clk_prepare_enable(pcie->free_ck);
-@@ -1022,10 +1024,8 @@ static int mtk_pcie_subsys_powerup(struc
- return 0;
-
- err_free_ck:
-- if (dev->pm_domain) {
-- pm_runtime_put_sync(dev);
-- pm_runtime_disable(dev);
-- }
-+ pm_runtime_put_sync(dev);
-+ pm_runtime_disable(dev);
-
- return err;
- }
-@@ -1130,36 +1130,6 @@ static int mtk_pcie_request_resources(st
- return err;
-
- err = devm_pci_remap_iospace(dev, &pcie->pio, pcie->io.start);
-- if (err)
-- return err;
--
-- return 0;
--}
--
--static int mtk_pcie_register_host(struct pci_host_bridge *host)
--{
-- struct mtk_pcie *pcie = pci_host_bridge_priv(host);
-- struct pci_bus *child;
-- int err;
--
-- host->busnr = pcie->busn.start;
-- host->dev.parent = pcie->dev;
-- host->ops = pcie->soc->ops;
-- host->map_irq = of_irq_parse_and_map_pci;
-- host->swizzle_irq = pci_common_swizzle;
-- host->sysdata = pcie;
--
-- err = pci_scan_root_bus_bridge(host);
-- if (err < 0)
-- return err;
--
-- pci_bus_size_bridges(host->bus);
-- pci_bus_assign_resources(host->bus);
--
-- list_for_each_entry(child, &host->bus->children, node)
-- pcie_bus_configure_settings(child);
--
-- pci_bus_add_devices(host->bus);
-
- return 0;
- }
-@@ -1190,7 +1160,14 @@ static int mtk_pcie_probe(struct platfor
- if (err)
- goto put_resources;
-
-- err = mtk_pcie_register_host(host);
-+ host->busnr = pcie->busn.start;
-+ host->dev.parent = pcie->dev;
-+ host->ops = pcie->soc->ops;
-+ host->map_irq = of_irq_parse_and_map_pci;
-+ host->swizzle_irq = pci_common_swizzle;
-+ host->sysdata = pcie;
-+
-+ err = pci_host_probe(host);
- if (err)
- goto put_resources;
-
-@@ -1203,6 +1180,80 @@ put_resources:
- return err;
- }
-
-+
-+static void mtk_pcie_free_resources(struct mtk_pcie *pcie)
-+{
-+ struct pci_host_bridge *host = pci_host_bridge_from_priv(pcie);
-+ struct list_head *windows = &host->windows;
-+
-+ pci_free_resource_list(windows);
-+}
-+
-+static int mtk_pcie_remove(struct platform_device *pdev)
-+{
-+ struct mtk_pcie *pcie = platform_get_drvdata(pdev);
-+ struct pci_host_bridge *host = pci_host_bridge_from_priv(pcie);
-+
-+ pci_stop_root_bus(host->bus);
-+ pci_remove_root_bus(host->bus);
-+ mtk_pcie_free_resources(pcie);
-+
-+ mtk_pcie_irq_teardown(pcie);
-+
-+ mtk_pcie_put_resources(pcie);
-+
-+ return 0;
-+}
-+
-+static int __maybe_unused mtk_pcie_suspend_noirq(struct device *dev)
-+{
-+ struct mtk_pcie *pcie = dev_get_drvdata(dev);
-+ struct mtk_pcie_port *port;
-+
-+ if (list_empty(&pcie->ports))
-+ return 0;
-+
-+ list_for_each_entry(port, &pcie->ports, list) {
-+ clk_disable_unprepare(port->pipe_ck);
-+ clk_disable_unprepare(port->obff_ck);
-+ clk_disable_unprepare(port->axi_ck);
-+ clk_disable_unprepare(port->aux_ck);
-+ clk_disable_unprepare(port->ahb_ck);
-+ clk_disable_unprepare(port->sys_ck);
-+ phy_power_off(port->phy);
-+ phy_exit(port->phy);
-+ }
-+
-+ clk_disable_unprepare(pcie->free_ck);
-+
-+ return 0;
-+}
-+
-+static int __maybe_unused mtk_pcie_resume_noirq(struct device *dev)
-+{
-+ struct mtk_pcie *pcie = dev_get_drvdata(dev);
-+ struct mtk_pcie_port *port, *tmp;
-+
-+ if (list_empty(&pcie->ports))
-+ return 0;
-+
-+ clk_prepare_enable(pcie->free_ck);
-+
-+ list_for_each_entry_safe(port, tmp, &pcie->ports, list)
-+ mtk_pcie_enable_port(port);
-+
-+ /* In case of EP was removed while system suspend. */
-+ if (list_empty(&pcie->ports))
-+ clk_disable_unprepare(pcie->free_ck);
-+
-+ return 0;
-+}
-+
-+static const struct dev_pm_ops mtk_pcie_pm_ops = {
-+ SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(mtk_pcie_suspend_noirq,
-+ mtk_pcie_resume_noirq)
-+};
-+
- static const struct mtk_pcie_soc mtk_pcie_soc_v1 = {
- .ops = &mtk_pcie_ops,
- .startup = mtk_pcie_startup_port,
-@@ -1241,10 +1292,13 @@ static const struct of_device_id mtk_pci
-
- static struct platform_driver mtk_pcie_driver = {
- .probe = mtk_pcie_probe,
-+ .remove = mtk_pcie_remove,
- .driver = {
- .name = "mtk-pcie",
- .of_match_table = mtk_pcie_ids,
- .suppress_bind_attrs = true,
-+ .pm = &mtk_pcie_pm_ops,
- },
- };
--builtin_platform_driver(mtk_pcie_driver);
-+module_platform_driver(mtk_pcie_driver);
-+MODULE_LICENSE("GPL v2");
---- a/include/linux/clk.h
-+++ b/include/linux/clk.h
-@@ -349,6 +349,17 @@ int __must_check devm_clk_bulk_get(struc
- struct clk *devm_clk_get(struct device *dev, const char *id);
-
- /**
-+ * devm_clk_get_optional - lookup and obtain a managed reference to an optional
-+ * clock producer.
-+ * @dev: device for clock "consumer"
-+ * @id: clock consumer ID
-+ *
-+ * Behaves the same as devm_clk_get() except where there is no clock producer.
-+ * In this case, instead of returning -ENOENT, the function returns NULL.
-+ */
-+struct clk *devm_clk_get_optional(struct device *dev, const char *id);
-+
-+/**
- * devm_get_clk_from_child - lookup and obtain a managed reference to a
- * clock producer from child node.
- * @dev: device for clock "consumer"
+++ /dev/null
-From 004eb24e939b5b31f828333f37fb5cb2a877d6f2 Mon Sep 17 00:00:00 2001
-From: Kristian Evensen <kristian.evensen@gmail.com>
-Date: Sun, 17 Jun 2018 14:41:47 +0200
-Subject: [PATCH] arm: dts: Add Unielec U7623 DTS
-
----
- arch/arm/boot/dts/Makefile | 1 +
- .../dts/mt7623a-unielec-u7623-02-emmc-512m.dts | 18 +
- .../boot/dts/mt7623a-unielec-u7623-02-emmc.dtsi | 366 +++++++++++++++++++++
- 3 files changed, 385 insertions(+)
- create mode 100644 arch/arm/boot/dts/mt7623a-unielec-u7623-02-emmc-512m.dts
- create mode 100644 arch/arm/boot/dts/mt7623a-unielec-u7623-02-emmc.dtsi
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -1193,6 +1193,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
- mt7623a-rfb-nand.dtb \
- mt7623n-rfb-emmc.dtb \
- mt7623n-bananapi-bpi-r2.dtb \
-+ mt7623a-unielec-u7623-02-emmc-512m.dtb \
- mt8127-moose.dtb \
- mt8135-evbp1.dtb
- dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
---- /dev/null
-+++ b/arch/arm/boot/dts/mt7623a-unielec-u7623-02-emmc-512m.dts
-@@ -0,0 +1,18 @@
-+/*
-+ * Copyright 2018 Kristian Evensen <kristian.evensen@gmail.com>
-+ *
-+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+ */
-+
-+/dts-v1/;
-+#include "mt7623a-unielec-u7623-02-emmc.dtsi"
-+
-+/ {
-+ model = "UniElec U7623-02 eMMC (512M RAM)";
-+ compatible = "unielec,u7623-02-emmc-512m", "unielec,u7623-02-emmc", "mediatek,mt7623";
-+
-+ memory@80000000 {
-+ device_type = "memory";
-+ reg = <0 0x80000000 0 0x20000000>;
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/mt7623a-unielec-u7623-02-emmc.dtsi
-@@ -0,0 +1,349 @@
-+/*
-+ * Copyright 2018 Kristian Evensen <kristian.evensen@gmail.com>
-+ *
-+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+ */
-+
-+#include <dt-bindings/input/input.h>
-+#include "mt7623.dtsi"
-+#include "mt6323.dtsi"
-+
-+/ {
-+ compatible = "unielec,u7623-02-emmc", "mediatek,mt7623";
-+
-+ aliases {
-+ serial2 = &uart2;
-+ };
-+
-+ chosen {
-+ bootargs = "root=/dev/mmcblk0p2 rootfstype=squashfs,f2fs";
-+ stdout-path = "serial2:115200n8";
-+ };
-+
-+ cpus {
-+ cpu@0 {
-+ proc-supply = <&mt6323_vproc_reg>;
-+ };
-+
-+ cpu@1 {
-+ proc-supply = <&mt6323_vproc_reg>;
-+ };
-+
-+ cpu@2 {
-+ proc-supply = <&mt6323_vproc_reg>;
-+ };
-+
-+ cpu@3 {
-+ proc-supply = <&mt6323_vproc_reg>;
-+ };
-+ };
-+
-+ reg_1p8v: regulator-1p8v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "fixed-1.8V";
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ reg_3p3v: regulator-3p3v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "fixed-3.3V";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ reg_5v: regulator-5v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "fixed-5V";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&key_pins_a>;
-+
-+ factory {
-+ label = "factory";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&pio 256 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&led_pins_unielec>;
-+
-+ led3 {
-+ label = "u7623-01:green:led3";
-+ gpios = <&pio 14 GPIO_ACTIVE_LOW>;
-+ default-state = "off";
-+ };
-+
-+ led4 {
-+ label = "u7623-01:green:led4";
-+ gpios = <&pio 15 GPIO_ACTIVE_LOW>;
-+ default-state = "off";
-+ };
-+ };
-+
-+ mt7530: switch@0 {
-+ compatible = "mediatek,mt7530";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+};
-+
-+&crypto {
-+ status = "okay";
-+};
-+
-+ð {
-+ status = "okay";
-+
-+ gmac0: mac@0 {
-+ compatible = "mediatek,eth-mac";
-+ reg = <0>;
-+ phy-mode = "trgmii";
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ pause;
-+ };
-+ };
-+
-+ mdio: mdio-bus {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ phy5: ethernet-phy@5 {
-+ reg = <5>;
-+ phy-mode = "rgmii-rxid";
-+ };
-+ };
-+};
-+
-+&mt7530 {
-+ compatible = "mediatek,mt7530";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <0>;
-+ pinctrl-names = "default";
-+ mediatek,mcm;
-+ resets = <ðsys 2>;
-+ reset-names = "mcm";
-+ core-supply = <&mt6323_vpa_reg>;
-+ io-supply = <&mt6323_vemc3v3_reg>;
-+
-+ dsa,mii-bus = <&mdio>;
-+
-+ ports {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <0>;
-+
-+ port@0 {
-+ reg = <0>;
-+ label = "lan0";
-+ cpu = <&cpu_port0>;
-+ };
-+
-+ port@1 {
-+ reg = <1>;
-+ label = "lan1";
-+ cpu = <&cpu_port0>;
-+ };
-+
-+ port@2 {
-+ reg = <2>;
-+ label = "lan2";
-+ cpu = <&cpu_port0>;
-+ };
-+
-+ port@3 {
-+ reg = <3>;
-+ label = "lan3";
-+ cpu = <&cpu_port0>;
-+ };
-+
-+ port@4 {
-+ reg = <4>;
-+ label = "wan";
-+ cpu = <&cpu_port0>;
-+ };
-+
-+ cpu_port0: port@6 {
-+ reg = <6>;
-+ label = "cpu";
-+ ethernet = <&gmac0>;
-+ phy-mode = "trgmii";
-+
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ };
-+ };
-+ };
-+};
-+
-+&mmc0 {
-+ pinctrl-names = "default", "state_uhs";
-+ pinctrl-0 = <&mmc0_pins_default>;
-+ pinctrl-1 = <&mmc0_pins_uhs>;
-+ status = "okay";
-+ bus-width = <8>;
-+ max-frequency = <50000000>;
-+ cap-mmc-highspeed;
-+ vmmc-supply = <®_3p3v>;
-+ vqmmc-supply = <®_1p8v>;
-+ non-removable;
-+};
-+
-+&pio {
-+ key_pins_a: keys-alt {
-+ pins-keys {
-+ pinmux = <MT7623_PIN_256_GPIO256_FUNC_GPIO256>,
-+ <MT7623_PIN_257_GPIO257_FUNC_GPIO257>;
-+ input-enable;
-+ };
-+ };
-+
-+ led_pins_unielec: leds-unielec {
-+ pins-leds {
-+ pinmux = <MT7623_PIN_14_GPIO14_FUNC_GPIO14>,
-+ <MT7623_PIN_15_GPIO15_FUNC_GPIO15>;
-+ };
-+ };
-+
-+ mmc0_pins_default: mmc0default {
-+ pins_cmd_dat {
-+ pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
-+ <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,
-+ <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
-+ <MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>,
-+ <MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>,
-+ <MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>,
-+ <MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>,
-+ <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
-+ <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
-+ input-enable;
-+ bias-pull-up;
-+ };
-+
-+ pins_clk {
-+ pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
-+ bias-pull-down;
-+ };
-+
-+ pins_rst {
-+ pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;
-+ bias-pull-up;
-+ };
-+ };
-+
-+ mmc0_pins_uhs: mmc0 {
-+ pins_cmd_dat {
-+ pinmux = <MT7623_PIN_111_MSDC0_DAT7_FUNC_MSDC0_DAT7>,
-+ <MT7623_PIN_112_MSDC0_DAT6_FUNC_MSDC0_DAT6>,
-+ <MT7623_PIN_113_MSDC0_DAT5_FUNC_MSDC0_DAT5>,
-+ <MT7623_PIN_114_MSDC0_DAT4_FUNC_MSDC0_DAT4>,
-+ <MT7623_PIN_118_MSDC0_DAT3_FUNC_MSDC0_DAT3>,
-+ <MT7623_PIN_119_MSDC0_DAT2_FUNC_MSDC0_DAT2>,
-+ <MT7623_PIN_120_MSDC0_DAT1_FUNC_MSDC0_DAT1>,
-+ <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>,
-+ <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>;
-+ input-enable;
-+ drive-strength = <MTK_DRIVE_2mA>;
-+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
-+ };
-+
-+ pins_clk {
-+ pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>;
-+ drive-strength = <MTK_DRIVE_2mA>;
-+ bias-pull-down = <MTK_PUPD_SET_R1R0_01>;
-+ };
-+
-+ pins_rst {
-+ pinmux = <MT7623_PIN_115_MSDC0_RSTB_FUNC_MSDC0_RSTB>;
-+ bias-pull-up;
-+ };
-+ };
-+
-+ pcie_default: pcie_pin_default {
-+ pins_cmd_dat {
-+ pinmux = <MT7623_PIN_208_AUD_EXT_CK1_FUNC_PCIE0_PERST_N>,
-+ <MT7623_PIN_209_AUD_EXT_CK2_FUNC_PCIE1_PERST_N>;
-+ bias-disable;
-+ };
-+ };
-+};
-+
-+&pwm {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pwm_pins_a>;
-+ status = "okay";
-+};
-+
-+&pwrap {
-+ mt6323 {
-+ mt6323led: led {
-+ compatible = "mediatek,mt6323-led";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ led@0 {
-+ reg = <0>;
-+ label = "led0";
-+ default-state = "off";
-+ };
-+ };
-+ };
-+};
-+
-+&uart2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart2_pins_b>;
-+ status = "okay";
-+};
-+
-+&usb1 {
-+ vusb33-supply = <®_3p3v>;
-+ vbus-supply = <®_3p3v>;
-+ status = "okay";
-+};
-+
-+&u3phy1 {
-+ status = "okay";
-+};
-+
-+&u3phy2 {
-+ status = "okay";
-+ mediatek,phy-switch = <&hifsys>;
-+};
-+
-+&pcie {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pcie_default>;
-+ status = "okay";
-+
-+ pcie@1,0 {
-+ status = "okay";
-+ };
-+
-+ pcie@2,0 {
-+ status = "okay";
-+ };
-+};
-+
-+&pcie1_phy {
-+ status = "okay";
-+};
-+
+++ /dev/null
---- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
-+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
-@@ -19,6 +19,7 @@
-
- chosen {
- stdout-path = "serial2:115200n8";
-+ bootargs = "console=ttyS2,115200n8";
- };
-
- cpus {
+++ /dev/null
-From a2479dc254ebe31c84fbcfda73f35e2321576494 Mon Sep 17 00:00:00 2001
-From: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
-Date: Tue, 19 Mar 2019 13:57:38 +0800
-Subject: [PATCH 1/6] mtd: mtk ecc: move mtk ecc header file to include/mtd
-
-Change-Id: I8dc1d30e21b40d68ef5efd9587012f82970156a5
-Signed-off-by: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
----
- drivers/mtd/nand/raw/mtk_ecc.c | 3 +--
- drivers/mtd/nand/raw/mtk_nand.c | 2 +-
- {drivers/mtd/nand/raw => include/linux/mtd}/mtk_ecc.h | 0
- 3 files changed, 2 insertions(+), 3 deletions(-)
- rename {drivers/mtd/nand/raw => include/linux/mtd}/mtk_ecc.h (100%)
-
---- a/drivers/mtd/nand/raw/mtk_ecc.c
-+++ b/drivers/mtd/nand/raw/mtk_ecc.c
-@@ -23,8 +23,7 @@
- #include <linux/of.h>
- #include <linux/of_platform.h>
- #include <linux/mutex.h>
--
--#include "mtk_ecc.h"
-+#include <linux/mtd/mtk_ecc.h>
-
- #define ECC_IDLE_MASK BIT(0)
- #define ECC_IRQ_EN BIT(0)
---- a/drivers/mtd/nand/raw/mtk_nand.c
-+++ b/drivers/mtd/nand/raw/mtk_nand.c
-@@ -25,7 +25,7 @@
- #include <linux/iopoll.h>
- #include <linux/of.h>
- #include <linux/of_device.h>
--#include "mtk_ecc.h"
-+#include <linux/mtd/mtk_ecc.h>
-
- /* NAND controller register definition */
- #define NFI_CNFG (0x00)
---- a/drivers/mtd/nand/raw/mtk_ecc.h
-+++ /dev/null
-@@ -1,49 +0,0 @@
--/*
-- * MTK SDG1 ECC controller
-- *
-- * Copyright (c) 2016 Mediatek
-- * Authors: Xiaolei Li <xiaolei.li@mediatek.com>
-- * Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
-- * This program is free software; you can redistribute it and/or modify it
-- * under the terms of the GNU General Public License version 2 as published
-- * by the Free Software Foundation.
-- */
--
--#ifndef __DRIVERS_MTD_NAND_MTK_ECC_H__
--#define __DRIVERS_MTD_NAND_MTK_ECC_H__
--
--#include <linux/types.h>
--
--enum mtk_ecc_mode {ECC_DMA_MODE = 0, ECC_NFI_MODE = 1};
--enum mtk_ecc_operation {ECC_ENCODE, ECC_DECODE};
--
--struct device_node;
--struct mtk_ecc;
--
--struct mtk_ecc_stats {
-- u32 corrected;
-- u32 bitflips;
-- u32 failed;
--};
--
--struct mtk_ecc_config {
-- enum mtk_ecc_operation op;
-- enum mtk_ecc_mode mode;
-- dma_addr_t addr;
-- u32 strength;
-- u32 sectors;
-- u32 len;
--};
--
--int mtk_ecc_encode(struct mtk_ecc *, struct mtk_ecc_config *, u8 *, u32);
--void mtk_ecc_get_stats(struct mtk_ecc *, struct mtk_ecc_stats *, int);
--int mtk_ecc_wait_done(struct mtk_ecc *, enum mtk_ecc_operation);
--int mtk_ecc_enable(struct mtk_ecc *, struct mtk_ecc_config *);
--void mtk_ecc_disable(struct mtk_ecc *);
--void mtk_ecc_adjust_strength(struct mtk_ecc *ecc, u32 *p);
--unsigned int mtk_ecc_get_parity_bits(struct mtk_ecc *ecc);
--
--struct mtk_ecc *of_mtk_ecc_get(struct device_node *);
--void mtk_ecc_release(struct mtk_ecc *);
--
--#endif
---- /dev/null
-+++ b/include/linux/mtd/mtk_ecc.h
-@@ -0,0 +1,49 @@
-+/*
-+ * MTK SDG1 ECC controller
-+ *
-+ * Copyright (c) 2016 Mediatek
-+ * Authors: Xiaolei Li <xiaolei.li@mediatek.com>
-+ * Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#ifndef __DRIVERS_MTD_NAND_MTK_ECC_H__
-+#define __DRIVERS_MTD_NAND_MTK_ECC_H__
-+
-+#include <linux/types.h>
-+
-+enum mtk_ecc_mode {ECC_DMA_MODE = 0, ECC_NFI_MODE = 1};
-+enum mtk_ecc_operation {ECC_ENCODE, ECC_DECODE};
-+
-+struct device_node;
-+struct mtk_ecc;
-+
-+struct mtk_ecc_stats {
-+ u32 corrected;
-+ u32 bitflips;
-+ u32 failed;
-+};
-+
-+struct mtk_ecc_config {
-+ enum mtk_ecc_operation op;
-+ enum mtk_ecc_mode mode;
-+ dma_addr_t addr;
-+ u32 strength;
-+ u32 sectors;
-+ u32 len;
-+};
-+
-+int mtk_ecc_encode(struct mtk_ecc *, struct mtk_ecc_config *, u8 *, u32);
-+void mtk_ecc_get_stats(struct mtk_ecc *, struct mtk_ecc_stats *, int);
-+int mtk_ecc_wait_done(struct mtk_ecc *, enum mtk_ecc_operation);
-+int mtk_ecc_enable(struct mtk_ecc *, struct mtk_ecc_config *);
-+void mtk_ecc_disable(struct mtk_ecc *);
-+void mtk_ecc_adjust_strength(struct mtk_ecc *ecc, u32 *p);
-+unsigned int mtk_ecc_get_parity_bits(struct mtk_ecc *ecc);
-+
-+struct mtk_ecc *of_mtk_ecc_get(struct device_node *);
-+void mtk_ecc_release(struct mtk_ecc *);
-+
-+#endif
+++ /dev/null
-From b341f120cfc9ca1dfd48364b7f36ac2c1fbdea43 Mon Sep 17 00:00:00 2001
-From: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
-Date: Wed, 3 Apr 2019 16:30:01 +0800
-Subject: [PATCH 3/6] mtd: spinand: disable on-die ECC
-
-Change-Id: I9745adaed5295202fabbe8ab8947885c57a5b847
-Signed-off-by: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
----
- drivers/mtd/nand/spi/core.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/mtd/nand/spi/core.c
-+++ b/drivers/mtd/nand/spi/core.c
-@@ -552,7 +552,7 @@ static int spinand_mtd_read(struct mtd_i
- int ret = 0;
-
- if (ops->mode != MTD_OPS_RAW && spinand->eccinfo.ooblayout)
-- enable_ecc = true;
-+ enable_ecc = false;
-
- mutex_lock(&spinand->lock);
-
-@@ -600,7 +600,7 @@ static int spinand_mtd_write(struct mtd_
- int ret = 0;
-
- if (ops->mode != MTD_OPS_RAW && mtd->ooblayout)
-- enable_ecc = true;
-+ enable_ecc = false;
-
- mutex_lock(&spinand->lock);
-
+++ /dev/null
-From 28ec0b7e48bb27435a8b3134019b88628faf497f Mon Sep 17 00:00:00 2001
-From: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
-Date: Tue, 11 Dec 2018 17:37:28 +0800
-Subject: [PATCH 4/6] dt-bindings: ARM: MediaTek: Document devicetree bindings
- for SPI NAND interface
-
-Change-Id: I9ece142055ae27100da95826fb3ea1960c2994e6
-Signed-off-by: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
----
- .../devicetree/bindings/spi/spi-mtk-snfi.txt | 44 +++++++++++++++++++
- 1 file changed, 44 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/spi/spi-mtk-snfi.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/spi/spi-mtk-snfi.txt
-@@ -0,0 +1,44 @@
-+MediaTek SoCs SPI NAND FLASH interface (SNFI) DT binding
-+
-+This file documents the device tree bindings for MTK SoCs SPI NAND controller.
-+Note that Parallel Nand and SPI NAND is alternative on MTK SoCs.
-+
-+Required properties:
-+- compatible: should be "mediatek,mt7622-snfi"
-+- reg: base physical address and size of SNFI.
-+- interrupts: interrupts of SNFI.
-+- clocks: SNFI required clocks.
-+- clock-names: SNFI clocks internal names.
-+- #address-cells: NAND chip index, should be 1.
-+- #size-cells: Should be 0.
-+
-+Example:
-+ snfi: spi@1100d000 {
-+ compatible = "mediatek,mt7622-snfi";
-+ reg = <0 0x1100d000 0 0x1000>;
-+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
-+ clocks = <&pericfg CLK_PERI_NFI_PD>,
-+ <&pericfg CLK_PERI_SNFI_PD>;
-+ clock-names = "nfi_clk", "spi_clk";
-+ ecc-engine = <&bch>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+
-+Subnodes properties:
-+- Should use spi-nand framework, see Documentation/devicetree/bindings/mtd/spi-nand.txt
-+
-+Example:
-+&snfi {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&serial_nand_pins>;
-+ status = "okay";
-+
-+ spi_nand@0 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ compatible = "spi-nand";
-+ spi-max-frequency = <104000000>;
-+ reg = <0>;
-+ };
-+};
+++ /dev/null
-From 1ecb38eabd90efe93957d0a822a167560c39308a Mon Sep 17 00:00:00 2001
-From: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
-Date: Wed, 20 Mar 2019 16:19:51 +0800
-Subject: [PATCH 6/6] spi: spi-mem: MediaTek: Add SPI NAND Flash interface
- driver for MediaTek MT7622
-
-Change-Id: I3e78406bb9b46b0049d3988a5c71c7069e4f809c
-Signed-off-by: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
----
- drivers/spi/Kconfig | 9 +
- drivers/spi/Makefile | 1 +
- drivers/spi/spi-mtk-snfi.c | 1183 ++++++++++++++++++++++++++++++++++++
- 3 files changed, 1193 insertions(+)
- create mode 100644 drivers/spi/spi-mtk-snfi.c
-
---- /dev/null
-+++ b/drivers/spi/spi-mtk-snfi.c
-@@ -0,0 +1,1183 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Driver for MediaTek SPI Nand interface
-+ *
-+ * Copyright (C) 2018 MediaTek Inc.
-+ * Authors: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
-+ *
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/interrupt.h>
-+#include <linux/iopoll.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/mtk_ecc.h>
-+#include <linux/mtd/spinand.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/spi-mem.h>
-+
-+/* NAND controller register definition */
-+/* NFI control */
-+#define NFI_CNFG 0x00
-+#define CNFG_DMA BIT(0)
-+#define CNFG_READ_EN BIT(1)
-+#define CNFG_DMA_BURST_EN BIT(2)
-+#define CNFG_BYTE_RW BIT(6)
-+#define CNFG_HW_ECC_EN BIT(8)
-+#define CNFG_AUTO_FMT_EN BIT(9)
-+#define CNFG_OP_PROGRAM (3UL << 12)
-+#define CNFG_OP_CUST (6UL << 12)
-+#define NFI_PAGEFMT 0x04
-+#define PAGEFMT_512 0
-+#define PAGEFMT_2K 1
-+#define PAGEFMT_4K 2
-+#define PAGEFMT_FDM_SHIFT 8
-+#define PAGEFMT_FDM_ECC_SHIFT 12
-+#define NFI_CON 0x08
-+#define CON_FIFO_FLUSH BIT(0)
-+#define CON_NFI_RST BIT(1)
-+#define CON_BRD BIT(8)
-+#define CON_BWR BIT(9)
-+#define CON_SEC_SHIFT 12
-+#define NFI_INTR_EN 0x10
-+#define INTR_AHB_DONE_EN BIT(6)
-+#define NFI_INTR_STA 0x14
-+#define NFI_CMD 0x20
-+#define NFI_STA 0x60
-+#define STA_EMP_PAGE BIT(12)
-+#define NAND_FSM_MASK (0x1f << 24)
-+#define NFI_FSM_MASK (0xf << 16)
-+#define NFI_ADDRCNTR 0x70
-+#define CNTR_MASK GENMASK(16, 12)
-+#define ADDRCNTR_SEC_SHIFT 12
-+#define ADDRCNTR_SEC(val) \
-+ (((val) & CNTR_MASK) >> ADDRCNTR_SEC_SHIFT)
-+#define NFI_STRADDR 0x80
-+#define NFI_BYTELEN 0x84
-+#define NFI_CSEL 0x90
-+#define NFI_FDML(x) (0xa0 + (x) * sizeof(u32) * 2)
-+#define NFI_FDMM(x) (0xa4 + (x) * sizeof(u32) * 2)
-+#define NFI_MASTER_STA 0x224
-+#define MASTER_STA_MASK 0x0fff
-+/* NFI_SPI control */
-+#define SNFI_MAC_OUTL 0x504
-+#define SNFI_MAC_INL 0x508
-+#define SNFI_RD_CTL2 0x510
-+#define RD_CMD_MASK 0x00ff
-+#define RD_DUMMY_SHIFT 8
-+#define SNFI_RD_CTL3 0x514
-+#define RD_ADDR_MASK 0xffff
-+#define SNFI_MISC_CTL 0x538
-+#define RD_MODE_X2 BIT(16)
-+#define RD_MODE_X4 (2UL << 16)
-+#define RD_QDUAL_IO (4UL << 16)
-+#define RD_MODE_MASK (7UL << 16)
-+#define RD_CUSTOM_EN BIT(6)
-+#define WR_CUSTOM_EN BIT(7)
-+#define WR_X4_EN BIT(20)
-+#define SW_RST BIT(28)
-+#define SNFI_MISC_CTL2 0x53c
-+#define WR_LEN_SHIFT 16
-+#define SNFI_PG_CTL1 0x524
-+#define WR_LOAD_CMD_SHIFT 8
-+#define SNFI_PG_CTL2 0x528
-+#define WR_LOAD_ADDR_MASK 0xffff
-+#define SNFI_MAC_CTL 0x500
-+#define MAC_WIP BIT(0)
-+#define MAC_WIP_READY BIT(1)
-+#define MAC_TRIG BIT(2)
-+#define MAC_EN BIT(3)
-+#define MAC_SIO_SEL BIT(4)
-+#define SNFI_STA_CTL1 0x550
-+#define SPI_STATE_IDLE 0xf
-+#define SNFI_CNFG 0x55c
-+#define SNFI_MODE_EN BIT(0)
-+#define SNFI_GPRAM_DATA 0x800
-+#define SNFI_GPRAM_MAX_LEN 16
-+
-+/* Dummy command trigger NFI to spi mode */
-+#define NAND_CMD_DUMMYREAD 0x00
-+#define NAND_CMD_DUMMYPROG 0x80
-+
-+#define MTK_TIMEOUT 500000
-+#define MTK_RESET_TIMEOUT 1000000
-+#define MTK_SNFC_MIN_SPARE 16
-+#define KB(x) ((x) * 1024UL)
-+
-+/*
-+ * supported spare size of each IP.
-+ * order should be the same with the spare size bitfiled defination of
-+ * register NFI_PAGEFMT.
-+ */
-+static const u8 spare_size_mt7622[] = {
-+ 16, 26, 27, 28
-+};
-+
-+struct mtk_snfi_caps {
-+ const u8 *spare_size;
-+ u8 num_spare_size;
-+ u32 nand_sec_size;
-+ u8 nand_fdm_size;
-+ u8 nand_fdm_ecc_size;
-+ u8 ecc_parity_bits;
-+ u8 pageformat_spare_shift;
-+ u8 bad_mark_swap;
-+};
-+
-+struct mtk_snfi_bad_mark_ctl {
-+ void (*bm_swap)(struct spi_mem *mem, u8 *buf, int raw);
-+ u32 sec;
-+ u32 pos;
-+};
-+
-+struct mtk_snfi_nand_chip {
-+ struct mtk_snfi_bad_mark_ctl bad_mark;
-+ u32 spare_per_sector;
-+};
-+
-+struct mtk_snfi_clk {
-+ struct clk *nfi_clk;
-+ struct clk *spi_clk;
-+};
-+
-+struct mtk_snfi {
-+ const struct mtk_snfi_caps *caps;
-+ struct mtk_snfi_nand_chip snfi_nand;
-+ struct mtk_snfi_clk clk;
-+ struct mtk_ecc_config ecc_cfg;
-+ struct mtk_ecc *ecc;
-+ struct completion done;
-+ struct device *dev;
-+
-+ void __iomem *regs;
-+
-+ u8 *buffer;
-+};
-+
-+static inline u8 *oob_ptr(struct spi_mem *mem, int i)
-+{
-+ struct spinand_device *spinand = spi_mem_get_drvdata(mem);
-+ struct mtk_snfi *snfi = spi_controller_get_devdata(mem->spi->master);
-+ struct mtk_snfi_nand_chip *snfi_nand = &snfi->snfi_nand;
-+ u8 *poi;
-+
-+ /* map the sector's FDM data to free oob:
-+ * the beginning of the oob area stores the FDM data of bad mark
-+ */
-+
-+ if (i < snfi_nand->bad_mark.sec)
-+ poi = spinand->oobbuf + (i + 1) * snfi->caps->nand_fdm_size;
-+ else if (i == snfi_nand->bad_mark.sec)
-+ poi = spinand->oobbuf;
-+ else
-+ poi = spinand->oobbuf + i * snfi->caps->nand_fdm_size;
-+
-+ return poi;
-+}
-+
-+static inline int mtk_data_len(struct spi_mem *mem)
-+{
-+ struct mtk_snfi *snfi = spi_controller_get_devdata(mem->spi->master);
-+ struct mtk_snfi_nand_chip *snfi_nand = &snfi->snfi_nand;
-+
-+ return snfi->caps->nand_sec_size + snfi_nand->spare_per_sector;
-+}
-+
-+static inline u8 *mtk_oob_ptr(struct spi_mem *mem,
-+ const u8 *p, int i)
-+{
-+ struct mtk_snfi *snfi = spi_controller_get_devdata(mem->spi->master);
-+
-+ return (u8 *)p + i * mtk_data_len(mem) + snfi->caps->nand_sec_size;
-+}
-+
-+static void mtk_snfi_bad_mark_swap(struct spi_mem *mem,
-+ u8 *buf, int raw)
-+{
-+ struct spinand_device *spinand = spi_mem_get_drvdata(mem);
-+ struct mtk_snfi *snfi = spi_controller_get_devdata(mem->spi->master);
-+ struct mtk_snfi_nand_chip *snfi_nand = &snfi->snfi_nand;
-+ u32 bad_pos = snfi_nand->bad_mark.pos;
-+
-+ if (raw)
-+ bad_pos += snfi_nand->bad_mark.sec * mtk_data_len(mem);
-+ else
-+ bad_pos += snfi_nand->bad_mark.sec * snfi->caps->nand_sec_size;
-+
-+ swap(spinand->oobbuf[0], buf[bad_pos]);
-+}
-+
-+static void mtk_snfi_set_bad_mark_ctl(struct mtk_snfi_bad_mark_ctl *bm_ctl,
-+ struct spi_mem *mem)
-+{
-+ struct spinand_device *spinand = spi_mem_get_drvdata(mem);
-+ struct mtd_info *mtd = spinand_to_mtd(spinand);
-+
-+ bm_ctl->bm_swap = mtk_snfi_bad_mark_swap;
-+ bm_ctl->sec = mtd->writesize / mtk_data_len(mem);
-+ bm_ctl->pos = mtd->writesize % mtk_data_len(mem);
-+}
-+
-+static void mtk_snfi_mac_enable(struct mtk_snfi *snfi)
-+{
-+ u32 mac;
-+
-+ mac = readl(snfi->regs + SNFI_MAC_CTL);
-+ mac &= ~MAC_SIO_SEL;
-+ mac |= MAC_EN;
-+
-+ writel(mac, snfi->regs + SNFI_MAC_CTL);
-+}
-+
-+static int mtk_snfi_mac_trigger(struct mtk_snfi *snfi)
-+{
-+ u32 mac, reg;
-+ int ret = 0;
-+
-+ mac = readl(snfi->regs + SNFI_MAC_CTL);
-+ mac |= MAC_TRIG;
-+ writel(mac, snfi->regs + SNFI_MAC_CTL);
-+
-+ ret = readl_poll_timeout_atomic(snfi->regs + SNFI_MAC_CTL, reg,
-+ reg & MAC_WIP_READY, 10,
-+ MTK_TIMEOUT);
-+ if (ret < 0) {
-+ dev_err(snfi->dev, "polling wip ready for read timeout\n");
-+ return -EIO;
-+ }
-+
-+ ret = readl_poll_timeout_atomic(snfi->regs + SNFI_MAC_CTL, reg,
-+ !(reg & MAC_WIP), 10,
-+ MTK_TIMEOUT);
-+ if (ret < 0) {
-+ dev_err(snfi->dev, "polling flash update timeout\n");
-+ return -EIO;
-+ }
-+
-+ return ret;
-+}
-+
-+static void mtk_snfi_mac_leave(struct mtk_snfi *snfi)
-+{
-+ u32 mac;
-+
-+ mac = readl(snfi->regs + SNFI_MAC_CTL);
-+ mac &= ~(MAC_TRIG | MAC_EN | MAC_SIO_SEL);
-+ writel(mac, snfi->regs + SNFI_MAC_CTL);
-+}
-+
-+static int mtk_snfi_mac_op(struct mtk_snfi *snfi)
-+{
-+ int ret = 0;
-+
-+ mtk_snfi_mac_enable(snfi);
-+
-+ ret = mtk_snfi_mac_trigger(snfi);
-+ if (ret)
-+ return ret;
-+
-+ mtk_snfi_mac_leave(snfi);
-+
-+ return ret;
-+}
-+
-+static irqreturn_t mtk_snfi_irq(int irq, void *id)
-+{
-+ struct mtk_snfi *snfi = id;
-+ u16 sta, ien;
-+
-+ sta = readw(snfi->regs + NFI_INTR_STA);
-+ ien = readw(snfi->regs + NFI_INTR_EN);
-+
-+ if (!(sta & ien))
-+ return IRQ_NONE;
-+
-+ writew(~sta & ien, snfi->regs + NFI_INTR_EN);
-+ complete(&snfi->done);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int mtk_snfi_enable_clk(struct device *dev, struct mtk_snfi_clk *clk)
-+{
-+ int ret;
-+
-+ ret = clk_prepare_enable(clk->nfi_clk);
-+ if (ret) {
-+ dev_err(dev, "failed to enable nfi clk\n");
-+ return ret;
-+ }
-+
-+ ret = clk_prepare_enable(clk->spi_clk);
-+ if (ret) {
-+ dev_err(dev, "failed to enable spi clk\n");
-+ clk_disable_unprepare(clk->nfi_clk);
-+ return ret;
-+ }
-+
-+ return 0;
-+}
-+
-+static void mtk_snfi_disable_clk(struct mtk_snfi_clk *clk)
-+{
-+ clk_disable_unprepare(clk->nfi_clk);
-+ clk_disable_unprepare(clk->spi_clk);
-+}
-+
-+static int mtk_snfi_reset(struct mtk_snfi *snfi)
-+{
-+ u32 val;
-+ int ret;
-+
-+ /* SW reset controller */
-+ val = readl(snfi->regs + SNFI_MISC_CTL) | SW_RST;
-+ writel(val, snfi->regs + SNFI_MISC_CTL);
-+
-+ ret = readw_poll_timeout(snfi->regs + SNFI_STA_CTL1, val,
-+ !(val & SPI_STATE_IDLE), 50,
-+ MTK_RESET_TIMEOUT);
-+ if (ret) {
-+ dev_warn(snfi->dev, "spi state active in reset [0x%x] = 0x%x\n",
-+ SNFI_STA_CTL1, val);
-+ return ret;
-+ }
-+
-+ val = readl(snfi->regs + SNFI_MISC_CTL);
-+ val &= ~SW_RST;
-+ writel(val, snfi->regs + SNFI_MISC_CTL);
-+
-+ /* reset all registers and force the NFI master to terminate */
-+ writew(CON_FIFO_FLUSH | CON_NFI_RST, snfi->regs + NFI_CON);
-+ ret = readw_poll_timeout(snfi->regs + NFI_STA, val,
-+ !(val & (NFI_FSM_MASK | NAND_FSM_MASK)), 50,
-+ MTK_RESET_TIMEOUT);
-+ if (ret) {
-+ dev_warn(snfi->dev, "nfi active in reset [0x%x] = 0x%x\n",
-+ NFI_STA, val);
-+ return ret;
-+ }
-+
-+ return 0;
-+}
-+
-+static int mtk_snfi_set_spare_per_sector(struct spinand_device *spinand,
-+ const struct mtk_snfi_caps *caps,
-+ u32 *sps)
-+{
-+ struct mtd_info *mtd = spinand_to_mtd(spinand);
-+ const u8 *spare = caps->spare_size;
-+ u32 sectors, i, closest_spare = 0;
-+
-+ sectors = mtd->writesize / caps->nand_sec_size;
-+ *sps = mtd->oobsize / sectors;
-+
-+ if (*sps < MTK_SNFC_MIN_SPARE)
-+ return -EINVAL;
-+
-+ for (i = 0; i < caps->num_spare_size; i++) {
-+ if (*sps >= spare[i] && spare[i] >= spare[closest_spare]) {
-+ closest_spare = i;
-+ if (*sps == spare[i])
-+ break;
-+ }
-+ }
-+
-+ *sps = spare[closest_spare];
-+
-+ return 0;
-+}
-+
-+static void mtk_snfi_read_fdm_data(struct spi_mem *mem,
-+ u32 sectors)
-+{
-+ struct mtk_snfi *snfi = spi_controller_get_devdata(mem->spi->master);
-+ const struct mtk_snfi_caps *caps = snfi->caps;
-+ u32 vall, valm;
-+ int i, j;
-+ u8 *oobptr;
-+
-+ for (i = 0; i < sectors; i++) {
-+ oobptr = oob_ptr(mem, i);
-+ vall = readl(snfi->regs + NFI_FDML(i));
-+ valm = readl(snfi->regs + NFI_FDMM(i));
-+
-+ for (j = 0; j < caps->nand_fdm_size; j++)
-+ oobptr[j] = (j >= 4 ? valm : vall) >> ((j % 4) * 8);
-+ }
-+}
-+
-+static void mtk_snfi_write_fdm_data(struct spi_mem *mem,
-+ u32 sectors)
-+{
-+ struct mtk_snfi *snfi = spi_controller_get_devdata(mem->spi->master);
-+ const struct mtk_snfi_caps *caps = snfi->caps;
-+ u32 vall, valm;
-+ int i, j;
-+ u8 *oobptr;
-+
-+ for (i = 0; i < sectors; i++) {
-+ oobptr = oob_ptr(mem, i);
-+ vall = 0;
-+ valm = 0;
-+ for (j = 0; j < 8; j++) {
-+ if (j < 4)
-+ vall |= (j < caps->nand_fdm_size ? oobptr[j] :
-+ 0xff) << (j * 8);
-+ else
-+ valm |= (j < caps->nand_fdm_size ? oobptr[j] :
-+ 0xff) << ((j - 4) * 8);
-+ }
-+ writel(vall, snfi->regs + NFI_FDML(i));
-+ writel(valm, snfi->regs + NFI_FDMM(i));
-+ }
-+}
-+
-+static int mtk_snfi_update_ecc_stats(struct spi_mem *mem,
-+ u8 *buf, u32 sectors)
-+{
-+ struct spinand_device *spinand = spi_mem_get_drvdata(mem);
-+ struct mtd_info *mtd = spinand_to_mtd(spinand);
-+ struct mtk_snfi *snfi = spi_controller_get_devdata(mem->spi->master);
-+ struct mtk_ecc_stats stats;
-+ int rc, i;
-+
-+ rc = readl(snfi->regs + NFI_STA) & STA_EMP_PAGE;
-+ if (rc) {
-+ memset(buf, 0xff, sectors * snfi->caps->nand_sec_size);
-+ for (i = 0; i < sectors; i++)
-+ memset(spinand->oobbuf, 0xff,
-+ snfi->caps->nand_fdm_size);
-+ return 0;
-+ }
-+
-+ mtk_ecc_get_stats(snfi->ecc, &stats, sectors);
-+ mtd->ecc_stats.corrected += stats.corrected;
-+ mtd->ecc_stats.failed += stats.failed;
-+
-+ return 0;
-+}
-+
-+static int mtk_snfi_hw_runtime_config(struct spi_mem *mem)
-+{
-+ struct spinand_device *spinand = spi_mem_get_drvdata(mem);
-+ struct mtd_info *mtd = spinand_to_mtd(spinand);
-+ struct nand_device *nand = mtd_to_nanddev(mtd);
-+ struct mtk_snfi *snfi = spi_controller_get_devdata(mem->spi->master);
-+ const struct mtk_snfi_caps *caps = snfi->caps;
-+ struct mtk_snfi_nand_chip *snfi_nand = &snfi->snfi_nand;
-+ u32 fmt, spare, i = 0;
-+ int ret;
-+
-+ ret = mtk_snfi_set_spare_per_sector(spinand, caps, &spare);
-+ if (ret)
-+ return ret;
-+
-+ /* calculate usable oob bytes for ecc parity data */
-+ snfi_nand->spare_per_sector = spare;
-+ spare -= caps->nand_fdm_size;
-+
-+ nand->memorg.oobsize = snfi_nand->spare_per_sector
-+ * (mtd->writesize / caps->nand_sec_size);
-+ mtd->oobsize = nanddev_per_page_oobsize(nand);
-+
-+ snfi->ecc_cfg.strength = (spare << 3) / caps->ecc_parity_bits;
-+ mtk_ecc_adjust_strength(snfi->ecc, &snfi->ecc_cfg.strength);
-+
-+ switch (mtd->writesize) {
-+ case 512:
-+ fmt = PAGEFMT_512;
-+ break;
-+ case KB(2):
-+ fmt = PAGEFMT_2K;
-+ break;
-+ case KB(4):
-+ fmt = PAGEFMT_4K;
-+ break;
-+ default:
-+ dev_err(snfi->dev, "invalid page len: %d\n", mtd->writesize);
-+ return -EINVAL;
-+ }
-+
-+ /* Setup PageFormat */
-+ while (caps->spare_size[i] != snfi_nand->spare_per_sector) {
-+ i++;
-+ if (i == (caps->num_spare_size - 1)) {
-+ dev_err(snfi->dev, "invalid spare size %d\n",
-+ snfi_nand->spare_per_sector);
-+ return -EINVAL;
-+ }
-+ }
-+
-+ fmt |= i << caps->pageformat_spare_shift;
-+ fmt |= caps->nand_fdm_size << PAGEFMT_FDM_SHIFT;
-+ fmt |= caps->nand_fdm_ecc_size << PAGEFMT_FDM_ECC_SHIFT;
-+ writel(fmt, snfi->regs + NFI_PAGEFMT);
-+
-+ snfi->ecc_cfg.len = caps->nand_sec_size + caps->nand_fdm_ecc_size;
-+
-+ mtk_snfi_set_bad_mark_ctl(&snfi_nand->bad_mark, mem);
-+
-+ return 0;
-+}
-+
-+static int mtk_snfi_read_from_cache(struct spi_mem *mem,
-+ const struct spi_mem_op *op, int oob_on)
-+{
-+ struct mtk_snfi *snfi = spi_controller_get_devdata(mem->spi->master);
-+ struct spinand_device *spinand = spi_mem_get_drvdata(mem);
-+ struct mtd_info *mtd = spinand_to_mtd(spinand);
-+ u32 sectors = mtd->writesize / snfi->caps->nand_sec_size;
-+ struct mtk_snfi_nand_chip *snfi_nand = &snfi->snfi_nand;
-+ u32 reg, len, col_addr = 0;
-+ int dummy_cycle, ret;
-+ dma_addr_t dma_addr;
-+
-+ len = sectors * (snfi->caps->nand_sec_size
-+ + snfi_nand->spare_per_sector);
-+
-+ dma_addr = dma_map_single(snfi->dev, snfi->buffer,
-+ len, DMA_FROM_DEVICE);
-+ ret = dma_mapping_error(snfi->dev, dma_addr);
-+ if (ret) {
-+ dev_err(snfi->dev, "dma mapping error\n");
-+ return -EINVAL;
-+ }
-+
-+ /* set Read cache command and dummy cycle */
-+ dummy_cycle = (op->dummy.nbytes << 3) >> (ffs(op->dummy.buswidth) - 1);
-+ reg = ((op->cmd.opcode & RD_CMD_MASK) |
-+ (dummy_cycle << RD_DUMMY_SHIFT));
-+ writel(reg, snfi->regs + SNFI_RD_CTL2);
-+
-+ writel((col_addr & RD_ADDR_MASK), snfi->regs + SNFI_RD_CTL3);
-+
-+ reg = readl(snfi->regs + SNFI_MISC_CTL);
-+ reg |= RD_CUSTOM_EN;
-+ reg &= ~(RD_MODE_MASK | WR_X4_EN);
-+
-+ /* set data and addr buswidth */
-+ if (op->data.buswidth == 4)
-+ reg |= RD_MODE_X4;
-+ else if (op->data.buswidth == 2)
-+ reg |= RD_MODE_X2;
-+
-+ if (op->addr.buswidth == 4 || op->addr.buswidth == 2)
-+ reg |= RD_QDUAL_IO;
-+ writel(reg, snfi->regs + SNFI_MISC_CTL);
-+
-+ writel(len, snfi->regs + SNFI_MISC_CTL2);
-+ writew(sectors << CON_SEC_SHIFT, snfi->regs + NFI_CON);
-+ reg = readw(snfi->regs + NFI_CNFG);
-+ reg |= CNFG_READ_EN | CNFG_DMA_BURST_EN | CNFG_DMA | CNFG_OP_CUST;
-+
-+ if (!oob_on) {
-+ reg |= CNFG_AUTO_FMT_EN | CNFG_HW_ECC_EN;
-+ writew(reg, snfi->regs + NFI_CNFG);
-+
-+ snfi->ecc_cfg.mode = ECC_NFI_MODE;
-+ snfi->ecc_cfg.sectors = sectors;
-+ snfi->ecc_cfg.op = ECC_DECODE;
-+ ret = mtk_ecc_enable(snfi->ecc, &snfi->ecc_cfg);
-+ if (ret) {
-+ dev_err(snfi->dev, "ecc enable failed\n");
-+ /* clear NFI_CNFG */
-+ reg &= ~(CNFG_READ_EN | CNFG_DMA_BURST_EN | CNFG_DMA |
-+ CNFG_AUTO_FMT_EN | CNFG_HW_ECC_EN);
-+ writew(reg, snfi->regs + NFI_CNFG);
-+ goto out;
-+ }
-+ } else {
-+ writew(reg, snfi->regs + NFI_CNFG);
-+ }
-+
-+ writel(lower_32_bits(dma_addr), snfi->regs + NFI_STRADDR);
-+ readw(snfi->regs + NFI_INTR_STA);
-+ writew(INTR_AHB_DONE_EN, snfi->regs + NFI_INTR_EN);
-+
-+ init_completion(&snfi->done);
-+
-+ /* set dummy command to trigger NFI enter SPI mode */
-+ writew(NAND_CMD_DUMMYREAD, snfi->regs + NFI_CMD);
-+ reg = readl(snfi->regs + NFI_CON) | CON_BRD;
-+ writew(reg, snfi->regs + NFI_CON);
-+
-+ ret = wait_for_completion_timeout(&snfi->done, msecs_to_jiffies(500));
-+ if (!ret) {
-+ dev_err(snfi->dev, "read ahb done timeout\n");
-+ writew(0, snfi->regs + NFI_INTR_EN);
-+ ret = -ETIMEDOUT;
-+ goto out;
-+ }
-+
-+ ret = readl_poll_timeout_atomic(snfi->regs + NFI_BYTELEN, reg,
-+ ADDRCNTR_SEC(reg) >= sectors, 10,
-+ MTK_TIMEOUT);
-+ if (ret < 0) {
-+ dev_err(snfi->dev, "polling read byte len timeout\n");
-+ ret = -EIO;
-+ } else {
-+ if (!oob_on) {
-+ ret = mtk_ecc_wait_done(snfi->ecc, ECC_DECODE);
-+ if (ret) {
-+ dev_warn(snfi->dev, "wait ecc done timeout\n");
-+ } else {
-+ mtk_snfi_update_ecc_stats(mem, snfi->buffer,
-+ sectors);
-+ mtk_snfi_read_fdm_data(mem, sectors);
-+ }
-+ }
-+ }
-+
-+ if (oob_on)
-+ goto out;
-+
-+ mtk_ecc_disable(snfi->ecc);
-+out:
-+ dma_unmap_single(snfi->dev, dma_addr, len, DMA_FROM_DEVICE);
-+ writel(0, snfi->regs + NFI_CON);
-+ writel(0, snfi->regs + NFI_CNFG);
-+ reg = readl(snfi->regs + SNFI_MISC_CTL);
-+ reg &= ~RD_CUSTOM_EN;
-+ writel(reg, snfi->regs + SNFI_MISC_CTL);
-+
-+ return ret;
-+}
-+
-+static int mtk_snfi_write_to_cache(struct spi_mem *mem,
-+ const struct spi_mem_op *op,
-+ int oob_on)
-+{
-+ struct mtk_snfi *snfi = spi_controller_get_devdata(mem->spi->master);
-+ struct spinand_device *spinand = spi_mem_get_drvdata(mem);
-+ struct mtd_info *mtd = spinand_to_mtd(spinand);
-+ u32 sectors = mtd->writesize / snfi->caps->nand_sec_size;
-+ struct mtk_snfi_nand_chip *snfi_nand = &snfi->snfi_nand;
-+ u32 reg, len, col_addr = 0;
-+ dma_addr_t dma_addr;
-+ int ret;
-+
-+ len = sectors * (snfi->caps->nand_sec_size
-+ + snfi_nand->spare_per_sector);
-+
-+ dma_addr = dma_map_single(snfi->dev, snfi->buffer, len,
-+ DMA_TO_DEVICE);
-+ ret = dma_mapping_error(snfi->dev, dma_addr);
-+ if (ret) {
-+ dev_err(snfi->dev, "dma mapping error\n");
-+ return -EINVAL;
-+ }
-+
-+ /* set program load cmd and address */
-+ reg = (op->cmd.opcode << WR_LOAD_CMD_SHIFT);
-+ writel(reg, snfi->regs + SNFI_PG_CTL1);
-+ writel(col_addr & WR_LOAD_ADDR_MASK, snfi->regs + SNFI_PG_CTL2);
-+
-+ reg = readl(snfi->regs + SNFI_MISC_CTL);
-+ reg |= WR_CUSTOM_EN;
-+ reg &= ~(RD_MODE_MASK | WR_X4_EN);
-+
-+ if (op->data.buswidth == 4)
-+ reg |= WR_X4_EN;
-+ writel(reg, snfi->regs + SNFI_MISC_CTL);
-+
-+ writel(len << WR_LEN_SHIFT, snfi->regs + SNFI_MISC_CTL2);
-+ writew(sectors << CON_SEC_SHIFT, snfi->regs + NFI_CON);
-+
-+ reg = readw(snfi->regs + NFI_CNFG);
-+ reg &= ~(CNFG_READ_EN | CNFG_BYTE_RW);
-+ reg |= CNFG_DMA | CNFG_DMA_BURST_EN | CNFG_OP_PROGRAM;
-+
-+ if (!oob_on) {
-+ reg |= CNFG_AUTO_FMT_EN | CNFG_HW_ECC_EN;
-+ writew(reg, snfi->regs + NFI_CNFG);
-+
-+ snfi->ecc_cfg.mode = ECC_NFI_MODE;
-+ snfi->ecc_cfg.op = ECC_ENCODE;
-+ ret = mtk_ecc_enable(snfi->ecc, &snfi->ecc_cfg);
-+ if (ret) {
-+ dev_err(snfi->dev, "ecc enable failed\n");
-+ /* clear NFI_CNFG */
-+ reg &= ~(CNFG_DMA_BURST_EN | CNFG_DMA |
-+ CNFG_AUTO_FMT_EN | CNFG_HW_ECC_EN);
-+ writew(reg, snfi->regs + NFI_CNFG);
-+ dma_unmap_single(snfi->dev, dma_addr, len,
-+ DMA_FROM_DEVICE);
-+ goto out;
-+ }
-+ /* write OOB into the FDM registers (OOB area in MTK NAND) */
-+ mtk_snfi_write_fdm_data(mem, sectors);
-+ } else {
-+ writew(reg, snfi->regs + NFI_CNFG);
-+ }
-+ writel(lower_32_bits(dma_addr), snfi->regs + NFI_STRADDR);
-+ readw(snfi->regs + NFI_INTR_STA);
-+ writew(INTR_AHB_DONE_EN, snfi->regs + NFI_INTR_EN);
-+
-+ init_completion(&snfi->done);
-+
-+ /* set dummy command to trigger NFI enter SPI mode */
-+ writew(NAND_CMD_DUMMYPROG, snfi->regs + NFI_CMD);
-+ reg = readl(snfi->regs + NFI_CON) | CON_BWR;
-+ writew(reg, snfi->regs + NFI_CON);
-+
-+ ret = wait_for_completion_timeout(&snfi->done, msecs_to_jiffies(500));
-+ if (!ret) {
-+ dev_err(snfi->dev, "custom program done timeout\n");
-+ writew(0, snfi->regs + NFI_INTR_EN);
-+ ret = -ETIMEDOUT;
-+ goto ecc_disable;
-+ }
-+
-+ ret = readl_poll_timeout_atomic(snfi->regs + NFI_ADDRCNTR, reg,
-+ ADDRCNTR_SEC(reg) >= sectors,
-+ 10, MTK_TIMEOUT);
-+ if (ret)
-+ dev_err(snfi->dev, "hwecc write timeout\n");
-+
-+ecc_disable:
-+ mtk_ecc_disable(snfi->ecc);
-+
-+out:
-+ dma_unmap_single(snfi->dev, dma_addr, len, DMA_TO_DEVICE);
-+ writel(0, snfi->regs + NFI_CON);
-+ writel(0, snfi->regs + NFI_CNFG);
-+ reg = readl(snfi->regs + SNFI_MISC_CTL);
-+ reg &= ~WR_CUSTOM_EN;
-+ writel(reg, snfi->regs + SNFI_MISC_CTL);
-+
-+ return ret;
-+}
-+
-+static int mtk_snfi_read(struct spi_mem *mem,
-+ const struct spi_mem_op *op)
-+{
-+ struct spinand_device *spinand = spi_mem_get_drvdata(mem);
-+ struct mtk_snfi *snfi = spi_controller_get_devdata(mem->spi->master);
-+ struct mtd_info *mtd = spinand_to_mtd(spinand);
-+ struct mtk_snfi_nand_chip *snfi_nand = &snfi->snfi_nand;
-+ u32 col_addr = op->addr.val;
-+ int i, ret, sectors, oob_on = false;
-+
-+ if (col_addr == mtd->writesize)
-+ oob_on = true;
-+
-+ ret = mtk_snfi_read_from_cache(mem, op, oob_on);
-+ if (ret) {
-+ dev_warn(snfi->dev, "read from cache fail\n");
-+ return ret;
-+ }
-+
-+ sectors = mtd->writesize / snfi->caps->nand_sec_size;
-+ for (i = 0; i < sectors; i++) {
-+ if (oob_on)
-+ memcpy(oob_ptr(mem, i),
-+ mtk_oob_ptr(mem, snfi->buffer, i),
-+ snfi->caps->nand_fdm_size);
-+
-+ if (i == snfi_nand->bad_mark.sec && snfi->caps->bad_mark_swap)
-+ snfi_nand->bad_mark.bm_swap(mem, snfi->buffer,
-+ oob_on);
-+ }
-+
-+ if (!oob_on)
-+ memcpy(spinand->databuf, snfi->buffer, mtd->writesize);
-+
-+ return ret;
-+}
-+
-+static int mtk_snfi_write(struct spi_mem *mem,
-+ const struct spi_mem_op *op)
-+{
-+ struct spinand_device *spinand = spi_mem_get_drvdata(mem);
-+ struct mtk_snfi *snfi = spi_controller_get_devdata(mem->spi->master);
-+ struct mtd_info *mtd = spinand_to_mtd(spinand);
-+ struct mtk_snfi_nand_chip *snfi_nand = &snfi->snfi_nand;
-+ u32 ret, i, sectors, col_addr = op->addr.val;
-+ int oob_on = false;
-+
-+ if (col_addr == mtd->writesize)
-+ oob_on = true;
-+
-+ sectors = mtd->writesize / snfi->caps->nand_sec_size;
-+ memset(snfi->buffer, 0xff, mtd->writesize + mtd->oobsize);
-+
-+ if (!oob_on)
-+ memcpy(snfi->buffer, spinand->databuf, mtd->writesize);
-+
-+ for (i = 0; i < sectors; i++) {
-+ if (i == snfi_nand->bad_mark.sec && snfi->caps->bad_mark_swap)
-+ snfi_nand->bad_mark.bm_swap(mem, snfi->buffer, oob_on);
-+
-+ if (oob_on)
-+ memcpy(mtk_oob_ptr(mem, snfi->buffer, i),
-+ oob_ptr(mem, i),
-+ snfi->caps->nand_fdm_size);
-+ }
-+
-+ ret = mtk_snfi_write_to_cache(mem, op, oob_on);
-+ if (ret)
-+ dev_warn(snfi->dev, "write to cache fail\n");
-+
-+ return ret;
-+}
-+
-+static int mtk_snfi_command_exec(struct mtk_snfi *snfi,
-+ const u8 *txbuf, u8 *rxbuf,
-+ const u32 txlen, const u32 rxlen)
-+{
-+ u32 tmp, i, j, reg, m;
-+ u8 *p_tmp = (u8 *)(&tmp);
-+ int ret = 0;
-+
-+ /* Moving tx data to NFI_SPI GPRAM */
-+ for (i = 0, m = 0; i < txlen; ) {
-+ for (j = 0, tmp = 0; i < txlen && j < 4; i++, j++)
-+ p_tmp[j] = txbuf[i];
-+
-+ writel(tmp, snfi->regs + SNFI_GPRAM_DATA + m);
-+ m += 4;
-+ }
-+
-+ writel(txlen, snfi->regs + SNFI_MAC_OUTL);
-+ writel(rxlen, snfi->regs + SNFI_MAC_INL);
-+ ret = mtk_snfi_mac_op(snfi);
-+ if (ret)
-+ return ret;
-+
-+ /* For NULL input data, this loop will be skipped */
-+ if (rxlen)
-+ for (i = 0, m = 0; i < rxlen; ) {
-+ reg = readl(snfi->regs +
-+ SNFI_GPRAM_DATA + m);
-+ for (j = 0; i < rxlen && j < 4; i++, j++, rxbuf++) {
-+ if (m == 0 && i == 0)
-+ j = i + txlen;
-+ *rxbuf = (reg >> (j * 8)) & 0xFF;
-+ }
-+ m += 4;
-+ }
-+
-+ return ret;
-+}
-+
-+/*
-+ * mtk_snfi_exec_op - to process command/data to send to the
-+ * SPI NAND by mtk controller
-+ */
-+static int mtk_snfi_exec_op(struct spi_mem *mem,
-+ const struct spi_mem_op *op)
-+
-+{
-+ struct mtk_snfi *snfi = spi_controller_get_devdata(mem->spi->master);
-+ struct spinand_device *spinand = spi_mem_get_drvdata(mem);
-+ struct mtd_info *mtd = spinand_to_mtd(spinand);
-+ struct nand_device *nand = mtd_to_nanddev(mtd);
-+ const struct spi_mem_op *read_cache;
-+ const struct spi_mem_op *write_cache;
-+ u32 tmpbufsize, txlen = 0, rxlen = 0;
-+ u8 *txbuf, *rxbuf = NULL, *buf;
-+ int i, ret = 0;
-+
-+ ret = mtk_snfi_reset(snfi);
-+ if (ret) {
-+ dev_warn(snfi->dev, "reset spi memory controller fail\n");
-+ return ret;
-+ }
-+
-+ /*if bbt initial, framework have detect nand information */
-+ if (nand->bbt.cache) {
-+ read_cache = spinand->op_templates.read_cache;
-+ write_cache = spinand->op_templates.write_cache;
-+
-+ ret = mtk_snfi_hw_runtime_config(mem);
-+ if (ret)
-+ return ret;
-+
-+ /* For Read/Write with cache, Erase use framework flow */
-+ if (op->cmd.opcode == read_cache->cmd.opcode) {
-+ ret = mtk_snfi_read(mem, op);
-+ if (ret)
-+ dev_warn(snfi->dev, "snfi read fail\n");
-+ return ret;
-+ } else if (op->cmd.opcode == write_cache->cmd.opcode) {
-+ ret = mtk_snfi_write(mem, op);
-+ if (ret)
-+ dev_warn(snfi->dev, "snfi write fail\n");
-+ return ret;
-+ }
-+ }
-+
-+ tmpbufsize = sizeof(op->cmd.opcode) + op->addr.nbytes +
-+ op->dummy.nbytes + op->data.nbytes;
-+
-+ txbuf = kzalloc(tmpbufsize, GFP_KERNEL);
-+ if (!txbuf)
-+ return -ENOMEM;
-+
-+ txbuf[txlen++] = op->cmd.opcode;
-+
-+ if (op->addr.nbytes)
-+ for (i = 0; i < op->addr.nbytes; i++)
-+ txbuf[txlen++] = op->addr.val >>
-+ (8 * (op->addr.nbytes - i - 1));
-+
-+ txlen += op->dummy.nbytes;
-+
-+ if (op->data.dir == SPI_MEM_DATA_OUT)
-+ for (i = 0; i < op->data.nbytes; i++) {
-+ buf = (u8 *)op->data.buf.out;
-+ txbuf[txlen++] = buf[i];
-+ }
-+
-+ if (op->data.dir == SPI_MEM_DATA_IN) {
-+ rxbuf = (u8 *)op->data.buf.in;
-+ rxlen += op->data.nbytes;
-+ }
-+
-+ ret = mtk_snfi_command_exec(snfi, txbuf, rxbuf, txlen, rxlen);
-+ kfree(txbuf);
-+
-+ return ret;
-+}
-+
-+static int mtk_snfi_init(struct mtk_snfi *snfi)
-+{
-+ int ret;
-+
-+ /* Reset the state machine and data FIFO */
-+ ret = mtk_snfi_reset(snfi);
-+ if (ret) {
-+ dev_warn(snfi->dev, "MTK reset controller fail\n");
-+ return ret;
-+ }
-+
-+ snfi->buffer = devm_kzalloc(snfi->dev, 4096 + 256, GFP_KERNEL);
-+ if (!snfi->buffer)
-+ return -ENOMEM;
-+
-+ /* Clear interrupt, read clear. */
-+ readw(snfi->regs + NFI_INTR_STA);
-+ writew(0, snfi->regs + NFI_INTR_EN);
-+
-+ writel(0, snfi->regs + NFI_CON);
-+ writel(0, snfi->regs + NFI_CNFG);
-+
-+ /* Change to NFI_SPI mode. */
-+ writel(SNFI_MODE_EN, snfi->regs + SNFI_CNFG);
-+
-+ return 0;
-+}
-+
-+static int mtk_snfi_check_buswidth(u8 width)
-+{
-+ switch (width) {
-+ case 1:
-+ case 2:
-+ case 4:
-+ return 0;
-+
-+ default:
-+ break;
-+ }
-+
-+ return -ENOTSUPP;
-+}
-+
-+static bool mtk_snfi_supports_op(struct spi_mem *mem,
-+ const struct spi_mem_op *op)
-+{
-+ int ret = 0;
-+
-+ /* For MTK Spi Nand controller, cmd buswidth just support 1 bit*/
-+ if (op->cmd.buswidth != 1)
-+ ret = -ENOTSUPP;
-+
-+ if (op->addr.nbytes)
-+ ret |= mtk_snfi_check_buswidth(op->addr.buswidth);
-+
-+ if (op->dummy.nbytes)
-+ ret |= mtk_snfi_check_buswidth(op->dummy.buswidth);
-+
-+ if (op->data.nbytes)
-+ ret |= mtk_snfi_check_buswidth(op->data.buswidth);
-+
-+ if (ret)
-+ return false;
-+
-+ return true;
-+}
-+
-+static const struct spi_controller_mem_ops mtk_snfi_ops = {
-+ .supports_op = mtk_snfi_supports_op,
-+ .exec_op = mtk_snfi_exec_op,
-+};
-+
-+static const struct mtk_snfi_caps snfi_mt7622 = {
-+ .spare_size = spare_size_mt7622,
-+ .num_spare_size = 4,
-+ .nand_sec_size = 512,
-+ .nand_fdm_size = 8,
-+ .nand_fdm_ecc_size = 1,
-+ .ecc_parity_bits = 13,
-+ .pageformat_spare_shift = 4,
-+ .bad_mark_swap = 0,
-+};
-+
-+static const struct of_device_id mtk_snfi_id_table[] = {
-+ { .compatible = "mediatek,mt7622-snfi", .data = &snfi_mt7622, },
-+ { /* sentinel */ }
-+};
-+
-+static int mtk_snfi_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct device_node *np = dev->of_node;
-+ struct spi_controller *ctlr;
-+ struct mtk_snfi *snfi;
-+ struct resource *res;
-+ int ret = 0, irq;
-+
-+ ctlr = spi_alloc_master(&pdev->dev, sizeof(*snfi));
-+ if (!ctlr)
-+ return -ENOMEM;
-+
-+ snfi = spi_controller_get_devdata(ctlr);
-+ snfi->caps = of_device_get_match_data(dev);
-+ snfi->dev = dev;
-+
-+ snfi->ecc = of_mtk_ecc_get(np);
-+ if (IS_ERR_OR_NULL(snfi->ecc))
-+ goto err_put_master;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ snfi->regs = devm_ioremap_resource(dev, res);
-+ if (IS_ERR(snfi->regs)) {
-+ ret = PTR_ERR(snfi->regs);
-+ goto release_ecc;
-+ }
-+
-+ /* find the clocks */
-+ snfi->clk.nfi_clk = devm_clk_get(dev, "nfi_clk");
-+ if (IS_ERR(snfi->clk.nfi_clk)) {
-+ dev_err(dev, "no nfi clk\n");
-+ ret = PTR_ERR(snfi->clk.nfi_clk);
-+ goto release_ecc;
-+ }
-+
-+ snfi->clk.spi_clk = devm_clk_get(dev, "spi_clk");
-+ if (IS_ERR(snfi->clk.spi_clk)) {
-+ dev_err(dev, "no spi clk\n");
-+ ret = PTR_ERR(snfi->clk.spi_clk);
-+ goto release_ecc;
-+ }
-+
-+ ret = mtk_snfi_enable_clk(dev, &snfi->clk);
-+ if (ret)
-+ goto release_ecc;
-+
-+ /* find the irq */
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0) {
-+ dev_err(dev, "no snfi irq resource\n");
-+ ret = -EINVAL;
-+ goto clk_disable;
-+ }
-+
-+ ret = devm_request_irq(dev, irq, mtk_snfi_irq, 0, "mtk-snfi", snfi);
-+ if (ret) {
-+ dev_err(dev, "failed to request snfi irq\n");
-+ goto clk_disable;
-+ }
-+
-+ ret = dma_set_mask(dev, DMA_BIT_MASK(32));
-+ if (ret) {
-+ dev_err(dev, "failed to set dma mask\n");
-+ goto clk_disable;
-+ }
-+
-+ ctlr->dev.of_node = np;
-+ ctlr->mem_ops = &mtk_snfi_ops;
-+
-+ platform_set_drvdata(pdev, snfi);
-+ ret = mtk_snfi_init(snfi);
-+ if (ret) {
-+ dev_err(dev, "failed to init snfi\n");
-+ goto clk_disable;
-+ }
-+
-+ ret = devm_spi_register_master(dev, ctlr);
-+ if (ret)
-+ goto clk_disable;
-+
-+ return 0;
-+
-+clk_disable:
-+ mtk_snfi_disable_clk(&snfi->clk);
-+
-+release_ecc:
-+ mtk_ecc_release(snfi->ecc);
-+
-+err_put_master:
-+ spi_master_put(ctlr);
-+
-+ dev_err(dev, "MediaTek SPI NAND interface probe failed %d\n", ret);
-+ return ret;
-+}
-+
-+static int mtk_snfi_remove(struct platform_device *pdev)
-+{
-+ struct mtk_snfi *snfi = platform_get_drvdata(pdev);
-+
-+ mtk_snfi_disable_clk(&snfi->clk);
-+
-+ return 0;
-+}
-+
-+static int mtk_snfi_suspend(struct platform_device *pdev, pm_message_t state)
-+{
-+ struct mtk_snfi *snfi = platform_get_drvdata(pdev);
-+
-+ mtk_snfi_disable_clk(&snfi->clk);
-+
-+ return 0;
-+}
-+
-+static int mtk_snfi_resume(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct mtk_snfi *snfi = dev_get_drvdata(dev);
-+ int ret;
-+
-+ ret = mtk_snfi_enable_clk(dev, &snfi->clk);
-+ if (ret)
-+ return ret;
-+
-+ ret = mtk_snfi_init(snfi);
-+ if (ret)
-+ dev_err(dev, "failed to init snfi controller\n");
-+
-+ return ret;
-+}
-+
-+static struct platform_driver mtk_snfi_driver = {
-+ .driver = {
-+ .name = "mtk-snfi",
-+ .of_match_table = mtk_snfi_id_table,
-+ },
-+ .probe = mtk_snfi_probe,
-+ .remove = mtk_snfi_remove,
-+ .suspend = mtk_snfi_suspend,
-+ .resume = mtk_snfi_resume,
-+};
-+
-+module_platform_driver(mtk_snfi_driver);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_AUTHOR("Xiangsheng Hou <xiangsheng.hou@mediatek.com>");
-+MODULE_DESCRIPTION("Mediatek SPI Memory Interface Driver");
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -389,6 +389,15 @@ config SPI_MT65XX
- say Y or M here.If you are not sure, say N.
- SPI drivers for Mediatek MT65XX and MT81XX series ARM SoCs.
-
-+config SPI_MTK_SNFI
-+ tristate "MediaTek SPI NAND interface"
-+ select MTD_SPI_NAND
-+ help
-+ This selects the SPI NAND FLASH interface(SNFI),
-+ which could be found on MediaTek Soc.
-+ Say Y or M here.If you are not sure, say N.
-+ Note Parallel Nand and SPI NAND is alternative on MediaTek SoCs.
-+
- config SPI_NUC900
- tristate "Nuvoton NUC900 series SPI"
- depends on ARCH_W90X900
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -57,6 +57,7 @@ obj-$(CONFIG_SPI_MPC512x_PSC) += spi-mp
- obj-$(CONFIG_SPI_MPC52xx_PSC) += spi-mpc52xx-psc.o
- obj-$(CONFIG_SPI_MPC52xx) += spi-mpc52xx.o
- obj-$(CONFIG_SPI_MT65XX) += spi-mt65xx.o
-+obj-$(CONFIG_SPI_MTK_SNFI) += spi-mtk-snfi.o
- obj-$(CONFIG_SPI_MXS) += spi-mxs.o
- obj-$(CONFIG_SPI_NUC900) += spi-nuc900.o
- obj-$(CONFIG_SPI_OC_TINY) += spi-oc-tiny.o
+++ /dev/null
-From c813fbe806257c574240770ef716fbee19f7dbfa Mon Sep 17 00:00:00 2001
-From: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
-Date: Thu, 6 Jun 2019 16:29:04 +0800
-Subject: [PATCH] spi: spi-mem: Mediatek: Add SPI Nand support for MT7629
-
-Signed-off-by: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
----
- arch/arm/boot/dts/mt7629-rfb.dts | 45 ++++++++++++++++++++++++++++++++
- arch/arm/boot/dts/mt7629.dtsi | 22 ++++++++++++++++
- drivers/spi/spi-mtk-snfi.c | 12 +++++++++
- 3 files changed, 79 insertions(+)
-
---- a/arch/arm/boot/dts/mt7629.dtsi
-+++ b/arch/arm/boot/dts/mt7629.dtsi
-@@ -259,6 +259,28 @@
- status = "disabled";
- };
-
-+ bch: ecc@1100e000 {
-+ compatible = "mediatek,mt7622-ecc";
-+ reg = <0x1100e000 0x1000>;
-+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_LOW>;
-+ clocks = <&pericfg CLK_PERI_NFIECC_PD>;
-+ clock-names = "nfiecc_clk";
-+ status = "disabled";
-+ };
-+
-+ snfi: spi@1100d000 {
-+ compatible = "mediatek,mt7629-snfi";
-+ reg = <0x1100d000 0x1000>;
-+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
-+ clocks = <&pericfg CLK_PERI_NFI_PD>,
-+ <&pericfg CLK_PERI_SNFI_PD>;
-+ clock-names = "nfi_clk", "spi_clk";
-+ ecc-engine = <&bch>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "disabled";
-+ };
-+
- spi: spi@1100a000 {
- compatible = "mediatek,mt7629-spi",
- "mediatek,mt7622-spi";
---- a/drivers/spi/spi-mtk-snfi.c
-+++ b/drivers/spi/spi-mtk-snfi.c
-@@ -1029,8 +1029,20 @@ static const struct mtk_snfi_caps snfi_m
- .bad_mark_swap = 0,
- };
-
-+static const struct mtk_snfi_caps snfi_mt7629 = {
-+ .spare_size = spare_size_mt7622,
-+ .num_spare_size = 4,
-+ .nand_sec_size = 512,
-+ .nand_fdm_size = 8,
-+ .nand_fdm_ecc_size = 1,
-+ .ecc_parity_bits = 13,
-+ .pageformat_spare_shift = 4,
-+ .bad_mark_swap = 1,
-+};
-+
- static const struct of_device_id mtk_snfi_id_table[] = {
- { .compatible = "mediatek,mt7622-snfi", .data = &snfi_mt7622, },
-+ { .compatible = "mediatek,mt7629-snfi", .data = &snfi_mt7629, },
- { /* sentinel */ }
- };
-
---- a/arch/arm/boot/dts/mt7629-rfb.dts
-+++ b/arch/arm/boot/dts/mt7629-rfb.dts
-@@ -281,6 +281,52 @@
- };
- };
-
-+&bch {
-+ status = "okay";
-+};
-+
-+&snfi {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&serial_nand_pins>;
-+ status = "okay";
-+
-+ spi_nand@0 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ compatible = "spi-nand";
-+ spi-max-frequency = <104000000>;
-+ reg = <0>;
-+
-+ partitions {
-+ compatible = "fixed-partitions";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ partition@0 {
-+ label = "Bootloader";
-+ reg = <0x00000 0x0100000>;
-+ read-only;
-+ };
-+
-+ partition@100000 {
-+ label = "Config";
-+ reg = <0x100000 0x0040000>;
-+ };
-+
-+ partition@140000 {
-+ label = "factory";
-+ reg = <0x140000 0x0080000>;
-+ };
-+
-+ partition@1c0000 {
-+ label = "firmware";
-+ reg = <0x1c0000 0x1000000>;
-+ };
-+
-+ };
-+ };
-+};
-+
- &spi {
- pinctrl-names = "default";
- pinctrl-0 = <&spi_pins>;
+++ /dev/null
---- a/drivers/tty/serial/8250/8250.h
-+++ b/drivers/tty/serial/8250/8250.h
-@@ -80,6 +80,7 @@ struct serial8250_config {
- #define UART_CAP_MINI (1 << 17) /* Mini UART on BCM283X family lacks:
- * STOP PARITY EPAR SPAR WLEN5 WLEN6
- */
-+#define UART_CAP_NMOD (1 << 18) /* UART doesn't do termios */
-
- #define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */
- #define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */
---- a/drivers/tty/serial/8250/8250_port.c
-+++ b/drivers/tty/serial/8250/8250_port.c
-@@ -297,7 +297,7 @@ static const struct serial8250_config ua
- .tx_loadsz = 16,
- .fcr = UART_FCR_ENABLE_FIFO |
- UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT,
-- .flags = UART_CAP_FIFO,
-+ .flags = UART_CAP_FIFO | UART_CAP_NMOD,
- },
- [PORT_NPCM] = {
- .name = "Nuvoton 16550",
-@@ -2650,6 +2650,11 @@ serial8250_do_set_termios(struct uart_po
- unsigned long flags;
- unsigned int baud, quot, frac = 0;
-
-+ if (up->capabilities & UART_CAP_NMOD) {
-+ termios->c_cflag = 0;
-+ return;
-+ }
-+
- if (up->capabilities & UART_CAP_MINI) {
- termios->c_cflag &= ~(CSTOPB | PARENB | PARODD | CMSPAR);
- if ((termios->c_cflag & CSIZE) == CS5 ||
+++ /dev/null
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_ADVANCED_OPTIONS is not set
-CONFIG_AR8216_PHY=y
-CONFIG_AR8216_PHY_LEDS=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_ARCH_HAS_DMA_SET_COHERENT_MASK=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_MEMBARRIER_CALLBACKS=y
-CONFIG_ARCH_HAS_PHYS_TO_DMA=y
-CONFIG_ARCH_HAS_PTE_SPECIAL=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-CONFIG_ARCH_MMAP_RND_BITS=11
-CONFIG_ARCH_MMAP_RND_BITS_MAX=17
-CONFIG_ARCH_MMAP_RND_BITS_MIN=11
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=17
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WEAK_RELEASE_ACQUIRE=y
-CONFIG_ASN1=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BOOKE=y
-CONFIG_BOOKE_WDT=y
-CONFIG_BOUNCE=y
-# CONFIG_BSC9131_RDB is not set
-# CONFIG_BSC9132_QDS is not set
-# CONFIG_C293_PCIE is not set
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CLZ_TAB=y
-CONFIG_CMDLINE="console=ttyS0,115200"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-# CONFIG_CORENET_GENERIC is not set
-# CONFIG_CPM2 is not set
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-# CONFIG_CRYPTO_AES_PPC_SPE is not set
-CONFIG_CRYPTO_AKCIPHER=y
-CONFIG_CRYPTO_AKCIPHER2=y
-CONFIG_CRYPTO_AUTHENC=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_MD5_PPC is not set
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_RSA=y
-# CONFIG_CRYPTO_SHA1_PPC is not set
-# CONFIG_CRYPTO_SHA1_PPC_SPE is not set
-# CONFIG_CRYPTO_SHA256_PPC_SPE is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DNOTIFY=y
-CONFIG_DTC=y
-# CONFIG_E200 is not set
-CONFIG_E500=y
-# CONFIG_E5500_CPU is not set
-# CONFIG_E6500_CPU is not set
-CONFIG_EARLY_PRINTK=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_ETHERNET_PACKET_MANGLE=y
-# CONFIG_FHCI_DEBUG is not set
-CONFIG_FIXED_PHY=y
-CONFIG_FSL_BOOKE=y
-# CONFIG_FSL_DPAA is not set
-CONFIG_FSL_EMB_PERFMON=y
-# CONFIG_FSL_FMAN is not set
-CONFIG_FSL_GTM=y
-CONFIG_FSL_LBC=y
-CONFIG_FSL_PCI=y
-CONFIG_FSL_PQ_MDIO=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_SOC_BOOKE=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GEN_RTC=y
-# CONFIG_GE_IMP3A is not set
-CONFIG_GIANFAR=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_MPC8XXX=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_CBPF_JIT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_GUP=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KPROBES_ON_FTRACE=y
-CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_RSEQ=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y
-# CONFIG_HIVEAP_330 is not set
-CONFIG_HW_RANDOM=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_MPC=y
-CONFIG_ILLEGAL_POINTER_VALUE=0
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_ISA_DMA_API=y
-CONFIG_KERNEL_GZIP=y
-CONFIG_KERNEL_START=0xc0000000
-# CONFIG_KSI8560 is not set
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOWMEM_CAM_NUM=3
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_LXT_PHY=y
-# CONFIG_MATH_EMULATION is not set
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MIGRATION=y
-CONFIG_MODULES_USE_ELF_RELA=y
-# CONFIG_MPC8536_DS is not set
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_MPC85xx_CDS is not set
-# CONFIG_MPC85xx_DS is not set
-# CONFIG_MPC85xx_MDS is not set
-# CONFIG_MPC85xx_RDB is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_MSGR is not set
-CONFIG_MPIC_TIMER=y
-CONFIG_MPILIB=y
-# CONFIG_MTD_CFI is not set
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_SPI_NOR=y
-# CONFIG_MVME2500 is not set
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_NLS=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NR_IRQS=512
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND=y
-# CONFIG_P1010_RDB is not set
-# CONFIG_P1022_DS is not set
-# CONFIG_P1022_RDK is not set
-# CONFIG_P1023_RDB is not set
-CONFIG_PAGE_OFFSET=0xc0000000
-# CONFIG_PANDA is not set
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEASPM=y
-# CONFIG_PCIEASPM_DEBUG is not set
-CONFIG_PCIEASPM_DEFAULT=y
-# CONFIG_PCIEASPM_PERFORMANCE is not set
-# CONFIG_PCIEASPM_POWERSAVE is not set
-# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYSICAL_ALIGN=0x04000000
-CONFIG_PHYSICAL_START=0x00000000
-# CONFIG_PHYS_64BIT is not set
-# CONFIG_PPA8548 is not set
-CONFIG_PPC=y
-CONFIG_PPC32=y
-# CONFIG_PPC64 is not set
-CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-CONFIG_PPC_ADV_DEBUG_DACS=2
-CONFIG_PPC_ADV_DEBUG_DVCS=0
-CONFIG_PPC_ADV_DEBUG_IACS=2
-CONFIG_PPC_ADV_DEBUG_REGS=y
-CONFIG_PPC_BARRIER_NOSPEC=y
-CONFIG_PPC_BOOK3E_MMU=y
-# CONFIG_PPC_BOOK3S_32 is not set
-CONFIG_PPC_DOORBELL=y
-# CONFIG_PPC_E500MC is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-CONFIG_PPC_FSL_BOOK3E=y
-CONFIG_PPC_INDIRECT_PCI=y
-# CONFIG_PPC_IRQ_SOFT_MASK_DEBUG is not set
-CONFIG_PPC_MMU_NOHASH=y
-CONFIG_PPC_PCI_CHOICE=y
-# CONFIG_PPC_PTDUMP is not set
-# CONFIG_PPC_QEMU_E500 is not set
-CONFIG_PPC_SMP_MUXED_IPI=y
-CONFIG_PPC_UDBG_16550=y
-CONFIG_PPC_WERROR=y
-CONFIG_QE_GPIO=y
-CONFIG_QE_USB=y
-CONFIG_QUICC_ENGINE=y
-CONFIG_RAS=y
-# CONFIG_RED_15W_REV1 is not set
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_SPI=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_GENERIC=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RTC_MC146818_LIB=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_SBC8548 is not set
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SERIAL_QE is not set
-CONFIG_SIMPLE_GPIO=y
-# CONFIG_SOCRATES is not set
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPE=y
-CONFIG_SPE_POSSIBLE=y
-CONFIG_SPI=y
-CONFIG_SPI_FSL_ESPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SRCU=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_STX_GP3 is not set
-CONFIG_SWCONFIG=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_THREAD_SHIFT=13
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TINY_SRCU=y
-# CONFIG_TL_WDR4900_V1 is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-# CONFIG_TWR_P102x is not set
-CONFIG_UCC=y
-CONFIG_UCC_FAST=y
-CONFIG_UCC_GETH=y
-# CONFIG_UGETH_TX_ON_DEMAND is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_VDSO32=y
-# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_WS_AP3710I is not set
-# CONFIG_XES_MPC85xx is not set
-# CONFIG_XPS_USB_HCD_XILINX is not set
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_XZ_DEC_POWERPC=y
+++ /dev/null
---- a/arch/powerpc/platforms/85xx/common.c
-+++ b/arch/powerpc/platforms/85xx/common.c
-@@ -33,6 +33,7 @@ static const struct of_device_id mpc85xx
- { .compatible = "fsl,mpc8548-guts", },
- /* Probably unnecessary? */
- { .compatible = "gpio-leds", },
-+ { .compatible = "gpio-keys", },
- /* For all PCI controllers */
- { .compatible = "fsl,mpc8540-pci", },
- { .compatible = "fsl,mpc8548-pcie", },
+++ /dev/null
-From 1d9f596e572917772b87a2a37e1680902964782f Mon Sep 17 00:00:00 2001
-From: Gabor Juhos <juhosg@openwrt.org>
-Date: Wed, 20 Feb 2013 08:40:33 +0100
-Subject: [PATCH] powerpc: 85xx: add support for the TP-Link TL-WDR4900 v1
- board
-
-This patch adds support for the TP-Link TL-WDR4900 v1
-concurrent dual-band wireless router. The devices uses
-the Freescale P1014 SoC.
-
-Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
-Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
----
- arch/powerpc/boot/Makefile | 3 ++-
- arch/powerpc/boot/wrapper | 5 +++++
- arch/powerpc/platforms/85xx/Kconfig | 12 ++++++++++++
- arch/powerpc/platforms/85xx/Makefile | 1 +
- 4 files changed, 20 insertions(+), 1 deletion(-)
-
---- a/arch/powerpc/boot/Makefile
-+++ b/arch/powerpc/boot/Makefile
-@@ -164,6 +164,7 @@ src-plat-$(CONFIG_PPC_PSERIES) += pserie
- src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S
- src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S
- src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c
-+src-plat-$(CONFIG_TL_WDR4900_V1) += simpleboot.c fixed-head.S
-
- src-wlib := $(sort $(src-wlib-y))
- src-plat := $(sort $(src-plat-y))
-@@ -343,7 +344,7 @@ image-$(CONFIG_TQM8555) += cuImage.tqm
- image-$(CONFIG_TQM8560) += cuImage.tqm8560
- image-$(CONFIG_SBC8548) += cuImage.sbc8548
- image-$(CONFIG_KSI8560) += cuImage.ksi8560
--
-+image-$(CONFIG_TL_WDR4900_V1) += simpleImage.tl-wdr4900-v1
- # Board ports in arch/powerpc/platform/86xx/Kconfig
- image-$(CONFIG_MVME7100) += dtbImage.mvme7100
-
---- a/arch/powerpc/boot/wrapper
-+++ b/arch/powerpc/boot/wrapper
-@@ -302,6 +302,11 @@ adder875-redboot)
- platformo="$object/fixed-head.o $object/redboot-8xx.o"
- binary=y
- ;;
-+simpleboot-tl-wdr4900-v1)
-+ platformo="$object/fixed-head.o $object/simpleboot.o"
-+ link_address='0x1000000'
-+ binary=y
-+ ;;
- simpleboot-virtex405-*)
- platformo="$object/virtex405-head.o $object/simpleboot.o $object/virtex.o"
- binary=y
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -170,6 +170,18 @@ config STX_GP3
- select CPM2
- select DEFAULT_UIMAGE
-
-+config TL_WDR4900_V1
-+ bool "TP-Link TL-WDR4900 v1"
-+ select DEFAULT_UIMAGE
-+ select ARCH_REQUIRE_GPIOLIB
-+ select GPIO_MPC8XXX
-+ select SWIOTLB
-+ help
-+ This option enables support for the TP-Link TL-WDR4900 v1 board.
-+
-+ This board is a Concurrent Dual-Band wireless router with a
-+ Freescale P1014 SoC.
-+
- config TQM8540
- bool "TQ Components TQM8540"
- help
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -26,6 +26,7 @@ obj-$(CONFIG_CORENET_GENERIC) += coren
- obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o
- obj-$(CONFIG_STX_GP3) += stx_gp3.o
- obj-$(CONFIG_TQM85xx) += tqm85xx.o
-+obj-$(CONFIG_TL_WDR4900_V1) += tl_wdr4900_v1.o
- obj-$(CONFIG_SBC8548) += sbc8548.o
- obj-$(CONFIG_PPA8548) += ppa8548.o
- obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o
+++ /dev/null
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -49,6 +49,17 @@ config BSC9132_QDS
- and dual StarCore SC3850 DSP cores.
- Manufacturer : Freescale Semiconductor, Inc
-
-+config HIVEAP_330
-+ bool "Aerohive HiveAP-330"
-+ select DEFAULT_UIMAGE
-+ select ARCH_REQUIRE_GPIOLIB
-+ select GPIO_MPC8XXX
-+ help
-+ This option enables support for the Aerohive HiveAP-330 board.
-+
-+ This board is a Concurrent Dual-Band wireless access point with a
-+ Freescale P1020 SoC.
-+
- config MPC8540_ADS
- bool "Freescale MPC8540 ADS"
- select DEFAULT_UIMAGE
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -10,6 +10,7 @@ obj-y += common.o
- obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o
- obj-$(CONFIG_BSC9132_QDS) += bsc913x_qds.o
- obj-$(CONFIG_C293_PCIE) += c293pcie.o
-+obj-$(CONFIG_HIVEAP_330) += hiveap-330.o
- obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
- obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
- obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
+++ /dev/null
---- a/arch/powerpc/Kconfig
-+++ b/arch/powerpc/Kconfig
-@@ -810,6 +810,14 @@ config CMDLINE_FORCE
- This is useful if you cannot or don't want to change the
- command-line options your boot loader passes to the kernel.
-
-+config CMDLINE_OVERRIDE
-+ bool "Use alternative cmdline from device tree"
-+ help
-+ Some bootloaders may have uneditable bootargs. While CMDLINE_FORCE can
-+ be used, this is not a good option for kernels that are shared across
-+ devices. This setting enables using "chosen/cmdline-override" as the
-+ cmdline if it exists in the device tree.
-+
- config EXTRA_TARGETS
- string "Additional default image types"
- help
---- a/drivers/of/fdt.c
-+++ b/drivers/of/fdt.c
-@@ -1091,6 +1091,17 @@ int __init early_init_dt_scan_chosen(uns
- if (p != NULL && l > 0)
- strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE));
-
-+ /* CONFIG_CMDLINE_OVERRIDE is used to fallback to a different
-+ * device tree option of chosen/bootargs-override. This is
-+ * helpful on boards where u-boot sets bootargs, and is unable
-+ * to be modified.
-+ */
-+#ifdef CONFIG_CMDLINE_OVERRIDE
-+ p = of_get_flat_dt_prop(node, "bootargs-override", &l);
-+ if (p != NULL && l > 0)
-+ strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE));
-+#endif
-+
- /*
- * CONFIG_CMDLINE is meant to be a default in case nothing else
- * managed to set the command line, unless CONFIG_CMDLINE_FORCE
+++ /dev/null
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -173,6 +173,16 @@ config XES_MPC85xx
- Manufacturer: Extreme Engineering Solutions, Inc.
- URL: <http://www.xes-inc.com/>
-
-+config RED_15W_REV1
-+ bool "Sophos RED 15w Rev.1"
-+ select DEFAULT_UIMAGE
-+ select ARCH_REQUIRE_GPIOLIB
-+ select GPIO_MPC8XXX
-+ help
-+ This option enables support for the Sophos RED 15w Rev.1 board.
-+
-+ This board is a wireless VPN router with a Freescale P1010 SoC.
-+
- config STX_GP3
- bool "Silicon Turnkey Express GP3"
- help
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -25,6 +25,7 @@ obj-$(CONFIG_P1023_RDB) += p1023_rdb.o
- obj-$(CONFIG_TWR_P102x) += twr_p102x.o
- obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o
- obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o
-+obj-$(CONFIG_RED_15W_REV1) += red15w_rev1.o
- obj-$(CONFIG_STX_GP3) += stx_gp3.o
- obj-$(CONFIG_TQM85xx) += tqm85xx.o
- obj-$(CONFIG_TL_WDR4900_V1) += tl_wdr4900_v1.o
+++ /dev/null
-From 93514afd769c305182beeed1f9c4c46235879ef8 Mon Sep 17 00:00:00 2001
-From: Pawel Dembicki <paweldembicki@gmail.com>
-Date: Sun, 30 Dec 2018 23:24:41 +0100
-Subject: [PATCH] powerpc: mpc85xx: change P2020RDB dts file for OpenWRT
-
-This patch apply chages for OpenWRT in P2020RDB
-dts file.
-
-Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
----
- arch/powerpc/boot/dts/fsl/p2020rdb.dts | 98 +++++++++++++++++---------
- 1 file changed, 63 insertions(+), 35 deletions(-)
-
---- a/arch/powerpc/boot/dts/fsl/p2020rdb.dts
-+++ b/arch/powerpc/boot/dts/fsl/p2020rdb.dts
-@@ -2,6 +2,7 @@
- * P2020 RDB Device Tree Source
- *
- * Copyright 2009-2012 Freescale Semiconductor Inc.
-+ * Copyright 2018 Pawel Dembicki <paweldembicki@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
-@@ -9,10 +10,15 @@
- * option) any later version.
- */
-
-+/dts-v1/;
-+
- /include/ "p2020si-pre.dtsi"
-
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+
- / {
-- model = "fsl,P2020RDB";
-+ model = "Freescale P2020RDB";
- compatible = "fsl,P2020RDB";
-
- aliases {
-@@ -38,48 +44,38 @@
- 0x2 0x0 0x0 0xffb00000 0x00020000>;
-
- nor@0,0 {
-- #address-cells = <1>;
-- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x1000000>;
- bank-width = <2>;
- device-width = <1>;
-
-- partition@0 {
-- /* This location must not be altered */
-- /* 256KB for Vitesse 7385 Switch firmware */
-- reg = <0x0 0x00040000>;
-- label = "NOR (RO) Vitesse-7385 Firmware";
-- read-only;
-- };
--
-- partition@40000 {
-- /* 256KB for DTB Image */
-- reg = <0x00040000 0x00040000>;
-- label = "NOR (RO) DTB Image";
-- read-only;
-- };
-+ partitions {
-+ compatible = "fixed-partitions";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-
-- partition@80000 {
-- /* 3.5 MB for Linux Kernel Image */
-- reg = <0x00080000 0x00380000>;
-- label = "NOR (RO) Linux Kernel Image";
-- read-only;
-- };
-+ partition@0 {
-+ /* This location must not be altered */
-+ /* 256KB for Vitesse 7385 Switch firmware */
-+ reg = <0x0 0x00040000>;
-+ label = "NOR (RO) Vitesse-7385 Firmware";
-+ read-only;
-+ };
-
-- partition@400000 {
-- /* 11MB for JFFS2 based Root file System */
-- reg = <0x00400000 0x00b00000>;
-- label = "NOR (RW) JFFS2 Root File System";
-- };
-+ partition@40000 {
-+ compatible = "denx,fit";
-+ reg = <0x00040000 0x00ec0000>;
-+ label = "firmware";
-+ };
-
-- partition@f00000 {
-- /* This location must not be altered */
-- /* 512KB for u-boot Bootloader Image */
-- /* 512KB for u-boot Environment Variables */
-- reg = <0x00f00000 0x00100000>;
-- label = "NOR (RO) U-Boot Image";
-- read-only;
-+ partition@f00000 {
-+ /* This location must not be altered */
-+ /* 512KB for u-boot Bootloader Image */
-+ /* 512KB for u-boot Environment Variables */
-+ reg = <0x00f00000 0x00100000>;
-+ label = "u-boot";
-+ read-only;
-+ };
- };
- };
-
-@@ -144,13 +140,43 @@
- soc: soc@ffe00000 {
- ranges = <0x0 0x0 0xffe00000 0x100000>;
-
-+ gpio0: gpio-controller@fc00 {
-+ };
-+
- i2c@3000 {
-+ temperature-sensor@4c {
-+ compatible = "adi,adt7461";
-+ reg = <0x4c>;
-+ };
-+
-+ eeprom@50 {
-+ compatible = "atmel,24c256";
-+ reg = <0x50>;
-+ };
-+
- rtc@68 {
- compatible = "dallas,ds1339";
- reg = <0x68>;
- };
- };
-
-+ i2c@3100 {
-+ pmic@11 {
-+ compatible = "zl2006";
-+ reg = <0x11>;
-+ };
-+
-+ gpio@18 {
-+ compatible = "nxp,pca9557";
-+ reg = <0x18>;
-+ };
-+
-+ eeprom@52 {
-+ compatible = "atmel,24c01";
-+ reg = <0x52>;
-+ };
-+ };
-+
- spi@7000 {
- flash@0 {
- #address-cells = <1>;
-@@ -204,10 +230,12 @@
- phy0: ethernet-phy@0 {
- interrupts = <3 1 0 0>;
- reg = <0x0>;
-+ reset-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
- };
- phy1: ethernet-phy@1 {
- interrupts = <3 1 0 0>;
- reg = <0x1>;
-+ reset-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
- };
- tbi-phy@2 {
- device_type = "tbi-phy";
+++ /dev/null
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -60,6 +60,17 @@ config HIVEAP_330
- This board is a Concurrent Dual-Band wireless access point with a
- Freescale P1020 SoC.
-
-+config PANDA
-+ bool "OCEDO PANDA"
-+ select DEFAULT_UIMAGE
-+ select ARCH_REQUIRE_GPIOLIB
-+ select GPIO_MPC8XXX
-+ help
-+ This option enables support for the OCEDO PANDA board.
-+
-+ This board is a Concurrent Dual-Band wireless access point with a
-+ Freescale P1020 SoC.
-+
- config MPC8540_ADS
- bool "Freescale MPC8540 ADS"
- select DEFAULT_UIMAGE
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -22,6 +22,7 @@ obj-$(CONFIG_P1010_RDB) += p1010rdb.o
- obj-$(CONFIG_P1022_DS) += p1022_ds.o
- obj-$(CONFIG_P1022_RDK) += p1022_rdk.o
- obj-$(CONFIG_P1023_RDB) += p1023_rdb.o
-+obj-$(CONFIG_PANDA) += panda.o
- obj-$(CONFIG_TWR_P102x) += twr_p102x.o
- obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o
- obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o
+++ /dev/null
---- a/arch/powerpc/platforms/85xx/Kconfig
-+++ b/arch/powerpc/platforms/85xx/Kconfig
-@@ -71,6 +71,17 @@ config PANDA
- This board is a Concurrent Dual-Band wireless access point with a
- Freescale P1020 SoC.
-
-+config WS_AP3710I
-+ bool "Enterasys WS-AP3710i"
-+ select DEFAULT_UIMAGE
-+ select ARCH_REQUIRE_GPIOLIB
-+ select GPIO_MPC8XXX
-+ help
-+ This option enables support for the Enterasys WS-AP3710i board.
-+
-+ This board is a Concurrent Dual-Band wireless access point with a
-+ Freescale P1020 SoC.
-+
- config MPC8540_ADS
- bool "Freescale MPC8540 ADS"
- select DEFAULT_UIMAGE
---- a/arch/powerpc/platforms/85xx/Makefile
-+++ b/arch/powerpc/platforms/85xx/Makefile
-@@ -24,6 +24,7 @@ obj-$(CONFIG_P1022_RDK) += p1022_rdk.o
- obj-$(CONFIG_P1023_RDB) += p1023_rdb.o
- obj-$(CONFIG_PANDA) += panda.o
- obj-$(CONFIG_TWR_P102x) += twr_p102x.o
-+obj-$(CONFIG_WS_AP3710I) += ws-ap3710i.o
- obj-$(CONFIG_CORENET_GENERIC) += corenet_generic.o
- obj-$(CONFIG_FB_FSL_DIU) += t1042rdb_diu.o
- obj-$(CONFIG_RED_15W_REV1) += red15w_rev1.o
+++ /dev/null
-CONFIG_AHCI_MVEBU=y
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_KCOV=y
-CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
-CONFIG_ARCH_HAS_PHYS_TO_DMA=y
-CONFIG_ARCH_HAS_SET_MEMORY=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
-CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_MVEBU=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WANT_LIBATA_LEDS=y
-CONFIG_ARM=y
-CONFIG_ARMADA_370_CLK=y
-CONFIG_ARMADA_370_XP_IRQ=y
-CONFIG_ARMADA_370_XP_TIMER=y
-CONFIG_ARMADA_38X_CLK=y
-CONFIG_ARMADA_THERMAL=y
-CONFIG_ARMADA_XP_CLK=y
-CONFIG_ARM_APPENDED_DTB=y
-# CONFIG_ARM_ARMADA_37XX_CPUFREQ is not set
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
-# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_CRYPTO=y
-CONFIG_ARM_ERRATA_720789=y
-CONFIG_ARM_ERRATA_764369=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GLOBAL_TIMER=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_HEAVY_MB=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-# CONFIG_ARM_LPAE is not set
-CONFIG_ARM_MVEBU_V7_CPUIDLE=y
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
-CONFIG_ATA=y
-CONFIG_ATA_LEDS=y
-CONFIG_ATAGS=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BOUNCE=y
-# CONFIG_CACHE_FEROCEON_L2 is not set
-CONFIG_CACHE_L2X0=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPUFREQ_DT_PLATDEV=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_HAS_ASID=y
-# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_PJ4B=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SPECTRE=y
-CONFIG_CPU_THERMAL=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_ACOMP2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_AES_ARM=y
-CONFIG_CRYPTO_AES_ARM_BS=y
-# CONFIG_CRYPTO_AES_ARM_CE is not set
-# CONFIG_CRYPTO_CHACHA20_NEON is not set
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_CRC32_ARM_CE is not set
-CONFIG_CRYPTO_CRYPTD=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_DEV_MARVELL_CESA=y
-# CONFIG_CRYPTO_GHASH_ARM_CE is not set
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA1_ARM=y
-# CONFIG_CRYPTO_SHA1_ARM_CE is not set
-CONFIG_CRYPTO_SHA1_ARM_NEON=y
-CONFIG_CRYPTO_SHA256_ARM=y
-# CONFIG_CRYPTO_SHA2_ARM_CE is not set
-CONFIG_CRYPTO_SHA512_ARM=y
-CONFIG_CRYPTO_SIMD=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_ALIGN_RODATA=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
-CONFIG_DEBUG_MVEBU_UART0=y
-# CONFIG_DEBUG_MVEBU_UART0_ALTERNATE is not set
-# CONFIG_DEBUG_MVEBU_UART1_ALTERNATE is not set
-CONFIG_DEBUG_UART_8250=y
-# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
-CONFIG_DEBUG_UART_8250_SHIFT=2
-# CONFIG_DEBUG_UART_8250_WORD is not set
-CONFIG_DEBUG_UART_PHYS=0xd0012000
-CONFIG_DEBUG_UART_VIRT=0xfec12000
-CONFIG_DEBUG_UNCOMPRESS=y
-CONFIG_DEBUG_USER=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_ENGINE_RAID=y
-CONFIG_DMA_OF=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EXT4_FS=y
-CONFIG_EXTCON=y
-CONFIG_F2FS_FS=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_GPIO_MVEBU=y
-CONFIG_GPIO_PCA953X=y
-CONFIG_GPIO_PCA953X_IRQ=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_BITREVERSE=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARM_SCU=y
-CONFIG_HAVE_ARM_SMCCC=y
-CONFIG_HAVE_ARM_TWD=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
-CONFIG_HAVE_EBPF_JIT=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_RSEQ=y
-CONFIG_HAVE_SMP=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HIGHMEM=y
-# CONFIG_HIGHPTE is not set
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HWBM=y
-CONFIG_HWMON=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MV64XXX=y
-# CONFIG_I2C_PXA is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-# CONFIG_IWMMXT is not set
-CONFIG_JBD2=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_PCA963X=y
-CONFIG_LEDS_TLC591XX=y
-CONFIG_LEDS_TRIGGER_DISK=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MACH_ARMADA_370=y
-# CONFIG_MACH_ARMADA_375 is not set
-CONFIG_MACH_ARMADA_38X=y
-# CONFIG_MACH_ARMADA_39X is not set
-CONFIG_MACH_ARMADA_XP=y
-# CONFIG_MACH_DOVE is not set
-CONFIG_MACH_MVEBU_ANY=y
-CONFIG_MACH_MVEBU_V7=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MANGLE_BOOTARGS=y
-CONFIG_MARVELL_PHY=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_I2C=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MEMORY=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_MVSDIO=y
-CONFIG_MMC_SDHCI=y
-# CONFIG_MMC_SDHCI_PCI is not set
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_SDHCI_PXAV3=y
-# CONFIG_MMC_TIFM_SD is not set
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_MARVELL=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_MVEBU_CLK_COMMON=y
-CONFIG_MVEBU_CLK_COREDIV=y
-CONFIG_MVEBU_CLK_CPU=y
-CONFIG_MVEBU_DEVBUS=y
-CONFIG_MVEBU_MBUS=y
-CONFIG_MVMDIO=y
-CONFIG_MVNETA=y
-CONFIG_MVNETA_BM=y
-CONFIG_MVNETA_BM_ENABLE=y
-CONFIG_MVPP2=y
-CONFIG_MV_XOR=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEON=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_MV88E6XXX=y
-CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y
-# CONFIG_NET_DSA_MV88E6XXX_PTP is not set
-CONFIG_NET_DSA_TAG_DSA=y
-CONFIG_NET_DSA_TAG_EDSA=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NLS=y
-CONFIG_NOP_USB_XCEIV=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NR_CPUS=4
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_ORION_WATCHDOG=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-CONFIG_PCI_MVEBU=y
-# CONFIG_PCI_V3_SEMI is not set
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-# CONFIG_PHY_MVEBU_A3700_COMPHY is not set
-# CONFIG_PHY_MVEBU_CP110_COMPHY is not set
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_ARMADA_370=y
-CONFIG_PINCTRL_ARMADA_38X=y
-CONFIG_PINCTRL_ARMADA_XP=y
-CONFIG_PINCTRL_MVEBU=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PJ4B_ERRATA_4742=y
-# CONFIG_PL310_ERRATA_588369 is not set
-# CONFIG_PL310_ERRATA_727915 is not set
-CONFIG_PL310_ERRATA_753970=y
-# CONFIG_PL310_ERRATA_769419 is not set
-CONFIG_PLAT_ORION=y
-CONFIG_PM_OPP=y
-CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=11
-CONFIG_PWM=y
-CONFIG_PWM_SYSFS=y
-CONFIG_RATIONAL=y
-CONFIG_RCU_NEED_SEGCBLIST=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_REFCOUNT_FULL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_ARMADA38X=y
-CONFIG_RTC_DRV_MV=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RTC_MC146818_LIB=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SATA_AHCI_PLATFORM=y
-CONFIG_SATA_MV=y
-CONFIG_SATA_PMP=y
-CONFIG_SCSI=y
-CONFIG_SENSORS_PWM_FAN=y
-CONFIG_SENSORS_TMP421=y
-CONFIG_SERIAL_8250_DW=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_MVEBU_CONSOLE=y
-CONFIG_SERIAL_MVEBU_UART=y
-CONFIG_SFP=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SG_POOL=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SOC_BUS=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-# CONFIG_SPI_ARMADA_3700 is not set
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SPI_ORION=y
-CONFIG_SRAM=y
-CONFIG_SRAM_EXEC=y
-CONFIG_SRCU=y
-CONFIG_SWPHY=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_HWMON=y
-CONFIG_THERMAL_OF=y
-# CONFIG_THUMB2_KERNEL is not set
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_ORION=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_LEDS_TRIGGER_USBPORT=y
-CONFIG_USB_PHY=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_MVEBU=y
-CONFIG_USB_XHCI_PLATFORM=y
-CONFIG_USE_OF=y
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
+++ /dev/null
-CONFIG_64BIT=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
-CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
-CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
-CONFIG_ARCH_HAS_PTE_SPECIAL=y
-CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
-CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
-CONFIG_ARCH_INLINE_READ_LOCK=y
-CONFIG_ARCH_INLINE_READ_LOCK_BH=y
-CONFIG_ARCH_INLINE_READ_LOCK_IRQ=y
-CONFIG_ARCH_INLINE_READ_LOCK_IRQSAVE=y
-CONFIG_ARCH_INLINE_READ_UNLOCK=y
-CONFIG_ARCH_INLINE_READ_UNLOCK_BH=y
-CONFIG_ARCH_INLINE_READ_UNLOCK_IRQ=y
-CONFIG_ARCH_INLINE_READ_UNLOCK_IRQRESTORE=y
-CONFIG_ARCH_INLINE_SPIN_LOCK=y
-CONFIG_ARCH_INLINE_SPIN_LOCK_BH=y
-CONFIG_ARCH_INLINE_SPIN_LOCK_IRQ=y
-CONFIG_ARCH_INLINE_SPIN_LOCK_IRQSAVE=y
-CONFIG_ARCH_INLINE_SPIN_TRYLOCK=y
-CONFIG_ARCH_INLINE_SPIN_TRYLOCK_BH=y
-CONFIG_ARCH_INLINE_SPIN_UNLOCK=y
-CONFIG_ARCH_INLINE_SPIN_UNLOCK_BH=y
-CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQ=y
-CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE=y
-CONFIG_ARCH_INLINE_WRITE_LOCK=y
-CONFIG_ARCH_INLINE_WRITE_LOCK_BH=y
-CONFIG_ARCH_INLINE_WRITE_LOCK_IRQ=y
-CONFIG_ARCH_INLINE_WRITE_LOCK_IRQSAVE=y
-CONFIG_ARCH_INLINE_WRITE_UNLOCK=y
-CONFIG_ARCH_INLINE_WRITE_UNLOCK_BH=y
-CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQ=y
-CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE=y
-CONFIG_ARCH_MMAP_RND_BITS=18
-CONFIG_ARCH_MMAP_RND_BITS_MAX=24
-CONFIG_ARCH_MMAP_RND_BITS_MIN=18
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_ARCH_SUPPORTS_INT128=y
-CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
-CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
-CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
-CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
-CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WANT_FRAME_POINTERS=y
-CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
-CONFIG_ARM64=y
-# CONFIG_ARM64_16K_PAGES is not set
-CONFIG_ARM64_4K_PAGES=y
-# CONFIG_ARM64_64K_PAGES is not set
-CONFIG_ARM64_CONT_SHIFT=4
-# CONFIG_ARM64_CRYPTO is not set
-# CONFIG_ARM64_HW_AFDBM is not set
-# CONFIG_ARM64_LSE_ATOMICS is not set
-CONFIG_ARM64_PAGE_SHIFT=12
-# CONFIG_ARM64_PAN is not set
-CONFIG_ARM64_PA_BITS=48
-CONFIG_ARM64_PA_BITS_48=y
-# CONFIG_ARM64_PMEM is not set
-# CONFIG_ARM64_PTDUMP_DEBUGFS is not set
-# CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET is not set
-CONFIG_ARM64_SSBD=y
-CONFIG_ARM64_SVE=y
-# CONFIG_ARM64_UAO is not set
-CONFIG_ARM64_VA_BITS=39
-CONFIG_ARM64_VA_BITS_39=y
-# CONFIG_ARM64_VA_BITS_48 is not set
-# CONFIG_ARM64_VHE is not set
-CONFIG_ARMADA_37XX_CLK=y
-CONFIG_ARMADA_AP806_SYSCON=y
-CONFIG_ARMADA_CP110_SYSCON=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_ARMADA_37XX_CPUFREQ=y
-CONFIG_ARM_GIC_V2M=y
-CONFIG_ARM_GIC_V3=y
-CONFIG_ARM_GIC_V3_ITS=y
-CONFIG_ARM_GIC_V3_ITS_PCI=y
-# CONFIG_ARM_PL172_MPMC is not set
-CONFIG_ARM_PSCI_FW=y
-# CONFIG_ARM_SP805_WATCHDOG is not set
-CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
-# CONFIG_DEBUG_ALIGN_RODATA is not set
-CONFIG_DMA_DIRECT_OPS=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
-CONFIG_HAVE_ARCH_HUGE_VMAP=y
-CONFIG_HAVE_ARCH_KASAN=y
-CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
-CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
-CONFIG_HAVE_ARCH_VMAP_STACK=y
-CONFIG_HAVE_CMPXCHG_DOUBLE=y
-CONFIG_HAVE_CMPXCHG_LOCAL=y
-CONFIG_HAVE_DEBUG_BUGVERBOSE=y
-CONFIG_HAVE_GENERIC_GUP=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_HAVE_PATA_PLATFORM=y
-CONFIG_HAVE_RCU_TABLE_FREE=y
-CONFIG_HOLES_IN_ZONE=y
-# CONFIG_HUGETLBFS is not set
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_INLINE_READ_LOCK=y
-CONFIG_INLINE_READ_LOCK_BH=y
-CONFIG_INLINE_READ_LOCK_IRQ=y
-CONFIG_INLINE_READ_LOCK_IRQSAVE=y
-CONFIG_INLINE_READ_UNLOCK_BH=y
-CONFIG_INLINE_READ_UNLOCK_IRQRESTORE=y
-CONFIG_INLINE_SPIN_LOCK=y
-CONFIG_INLINE_SPIN_LOCK_BH=y
-CONFIG_INLINE_SPIN_LOCK_IRQ=y
-CONFIG_INLINE_SPIN_LOCK_IRQSAVE=y
-CONFIG_INLINE_SPIN_TRYLOCK=y
-CONFIG_INLINE_SPIN_TRYLOCK_BH=y
-CONFIG_INLINE_SPIN_UNLOCK_BH=y
-CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE=y
-CONFIG_INLINE_WRITE_LOCK=y
-CONFIG_INLINE_WRITE_LOCK_BH=y
-CONFIG_INLINE_WRITE_LOCK_IRQ=y
-CONFIG_INLINE_WRITE_LOCK_IRQSAVE=y
-CONFIG_INLINE_WRITE_UNLOCK_BH=y
-CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MMC_SDHCI_XENON=y
-CONFIG_MODULES_USE_ELF_RELA=y
-CONFIG_MVEBU_GICP=y
-CONFIG_MVEBU_ICU=y
-CONFIG_MVEBU_ODMI=y
-CONFIG_MVEBU_PIC=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-# CONFIG_NUMA is not set
-CONFIG_PARTITION_PERCPU=y
-CONFIG_PCI_AARDVARK=y
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PHY_MVEBU_A3700_COMPHY=y
-CONFIG_PINCTRL_ARMADA_37XX=y
-CONFIG_PINCTRL_ARMADA_AP806=y
-CONFIG_PINCTRL_ARMADA_CP110=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-# CONFIG_RANDOMIZE_BASE is not set
-CONFIG_REGULATOR_GPIO=y
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPI_ARMADA_3700=y
-CONFIG_SWIOTLB=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_UNMAP_KERNEL_AT_EL0=y
-CONFIG_VMAP_STACK=y
-CONFIG_ZONE_DMA32=y
+++ /dev/null
-CONFIG_64BIT=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
-CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
-CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
-CONFIG_ARCH_HAS_PTE_SPECIAL=y
-CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
-CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
-CONFIG_ARCH_INLINE_READ_LOCK=y
-CONFIG_ARCH_INLINE_READ_LOCK_BH=y
-CONFIG_ARCH_INLINE_READ_LOCK_IRQ=y
-CONFIG_ARCH_INLINE_READ_LOCK_IRQSAVE=y
-CONFIG_ARCH_INLINE_READ_UNLOCK=y
-CONFIG_ARCH_INLINE_READ_UNLOCK_BH=y
-CONFIG_ARCH_INLINE_READ_UNLOCK_IRQ=y
-CONFIG_ARCH_INLINE_READ_UNLOCK_IRQRESTORE=y
-CONFIG_ARCH_INLINE_SPIN_LOCK=y
-CONFIG_ARCH_INLINE_SPIN_LOCK_BH=y
-CONFIG_ARCH_INLINE_SPIN_LOCK_IRQ=y
-CONFIG_ARCH_INLINE_SPIN_LOCK_IRQSAVE=y
-CONFIG_ARCH_INLINE_SPIN_TRYLOCK=y
-CONFIG_ARCH_INLINE_SPIN_TRYLOCK_BH=y
-CONFIG_ARCH_INLINE_SPIN_UNLOCK=y
-CONFIG_ARCH_INLINE_SPIN_UNLOCK_BH=y
-CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQ=y
-CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE=y
-CONFIG_ARCH_INLINE_WRITE_LOCK=y
-CONFIG_ARCH_INLINE_WRITE_LOCK_BH=y
-CONFIG_ARCH_INLINE_WRITE_LOCK_IRQ=y
-CONFIG_ARCH_INLINE_WRITE_LOCK_IRQSAVE=y
-CONFIG_ARCH_INLINE_WRITE_UNLOCK=y
-CONFIG_ARCH_INLINE_WRITE_UNLOCK_BH=y
-CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQ=y
-CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE=y
-CONFIG_ARCH_MMAP_RND_BITS=18
-CONFIG_ARCH_MMAP_RND_BITS_MAX=24
-CONFIG_ARCH_MMAP_RND_BITS_MIN=18
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_ARCH_SUPPORTS_INT128=y
-CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
-CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
-CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
-CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
-CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WANT_FRAME_POINTERS=y
-CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
-CONFIG_ARM64=y
-# CONFIG_ARM64_16K_PAGES is not set
-CONFIG_ARM64_4K_PAGES=y
-# CONFIG_ARM64_64K_PAGES is not set
-CONFIG_ARM64_CONT_SHIFT=4
-# CONFIG_ARM64_CRYPTO is not set
-# CONFIG_ARM64_HW_AFDBM is not set
-# CONFIG_ARM64_LSE_ATOMICS is not set
-CONFIG_ARM64_PAGE_SHIFT=12
-# CONFIG_ARM64_PAN is not set
-CONFIG_ARM64_PA_BITS=48
-CONFIG_ARM64_PA_BITS_48=y
-# CONFIG_ARM64_PMEM is not set
-# CONFIG_ARM64_PTDUMP_DEBUGFS is not set
-# CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET is not set
-CONFIG_ARM64_SSBD=y
-CONFIG_ARM64_SVE=y
-# CONFIG_ARM64_UAO is not set
-CONFIG_ARM64_VA_BITS=39
-CONFIG_ARM64_VA_BITS_39=y
-# CONFIG_ARM64_VA_BITS_48 is not set
-# CONFIG_ARM64_VHE is not set
-CONFIG_ARMADA_37XX_CLK=y
-CONFIG_ARMADA_AP806_SYSCON=y
-CONFIG_ARMADA_CP110_SYSCON=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_GIC_V2M=y
-CONFIG_ARM_GIC_V3=y
-CONFIG_ARM_GIC_V3_ITS=y
-CONFIG_ARM_GIC_V3_ITS_PCI=y
-# CONFIG_ARM_PL172_MPMC is not set
-CONFIG_ARM_PSCI_FW=y
-# CONFIG_ARM_SP805_WATCHDOG is not set
-CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
-# CONFIG_DEBUG_ALIGN_RODATA is not set
-CONFIG_DMA_DIRECT_OPS=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
-CONFIG_HAVE_ARCH_HUGE_VMAP=y
-CONFIG_HAVE_ARCH_KASAN=y
-CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
-CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
-CONFIG_HAVE_ARCH_VMAP_STACK=y
-CONFIG_HAVE_CMPXCHG_DOUBLE=y
-CONFIG_HAVE_CMPXCHG_LOCAL=y
-CONFIG_HAVE_DEBUG_BUGVERBOSE=y
-CONFIG_HAVE_GENERIC_GUP=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_HAVE_PATA_PLATFORM=y
-CONFIG_HAVE_RCU_TABLE_FREE=y
-CONFIG_HOLES_IN_ZONE=y
-# CONFIG_HUGETLBFS is not set
-CONFIG_HW_RANDOM_OMAP=y
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_INLINE_READ_LOCK=y
-CONFIG_INLINE_READ_LOCK_BH=y
-CONFIG_INLINE_READ_LOCK_IRQ=y
-CONFIG_INLINE_READ_LOCK_IRQSAVE=y
-CONFIG_INLINE_READ_UNLOCK_BH=y
-CONFIG_INLINE_READ_UNLOCK_IRQRESTORE=y
-CONFIG_INLINE_SPIN_LOCK=y
-CONFIG_INLINE_SPIN_LOCK_BH=y
-CONFIG_INLINE_SPIN_LOCK_IRQ=y
-CONFIG_INLINE_SPIN_LOCK_IRQSAVE=y
-CONFIG_INLINE_SPIN_TRYLOCK=y
-CONFIG_INLINE_SPIN_TRYLOCK_BH=y
-CONFIG_INLINE_SPIN_UNLOCK_BH=y
-CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE=y
-CONFIG_INLINE_WRITE_LOCK=y
-CONFIG_INLINE_WRITE_LOCK_BH=y
-CONFIG_INLINE_WRITE_LOCK_IRQ=y
-CONFIG_INLINE_WRITE_LOCK_IRQSAVE=y
-CONFIG_INLINE_WRITE_UNLOCK_BH=y
-CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE=y
-CONFIG_MARVELL_10G_PHY=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MMC_SDHCI_XENON=y
-CONFIG_MODULES_USE_ELF_RELA=y
-CONFIG_MVEBU_GICP=y
-CONFIG_MVEBU_ICU=y
-CONFIG_MVEBU_ODMI=y
-CONFIG_MVEBU_PIC=y
-CONFIG_MV_XOR_V2=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-# CONFIG_NUMA is not set
-CONFIG_PARTITION_PERCPU=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_ARMADA_8K=y
-CONFIG_PCIE_DW=y
-CONFIG_PCIE_DW_HOST=y
-# CONFIG_PCI_AARDVARK is not set
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PHY_MVEBU_CP110_COMPHY=y
-CONFIG_PINCTRL_ARMADA_37XX=y
-CONFIG_PINCTRL_ARMADA_AP806=y
-CONFIG_PINCTRL_ARMADA_CP110=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-# CONFIG_RANDOMIZE_BASE is not set
-CONFIG_RAS=y
-CONFIG_REGULATOR_GPIO=y
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SWIOTLB=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_UNMAP_KERNEL_AT_EL0=y
-CONFIG_VMAP_STACK=y
-CONFIG_ZONE_DMA32=y
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
-/*
- * Device tree for the uDPU board.
- * Based on Marvell Armada 3720 development board (DB-88F3720-DDR3)
- * Copyright (C) 2016 Marvell
- * Copyright (C) 2019 Methode Electronics
- * Copyright (C) 2019 Telus
- *
- * Vladimir Vid <vladimir.vid@sartura.hr>
- */
-
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include "armada-372x.dtsi"
-
-/ {
- model = "Methode uDPU Board";
- compatible = "methode,udpu", "marvell,armada3720";
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
- };
-
- leds {
- pinctrl-names = "default";
- compatible = "gpio-leds";
-
- power1 {
- label = "udpu:green:power";
- gpios = <&gpionb 11 GPIO_ACTIVE_LOW>;
- };
-
- power2 {
- label = "udpu:red:power";
- gpios = <&gpionb 12 GPIO_ACTIVE_LOW>;
- };
-
- network1 {
- label = "udpu:green:network";
- gpios = <&gpionb 13 GPIO_ACTIVE_LOW>;
- };
-
- network2 {
- label = "udpu:red:network";
- gpios = <&gpionb 14 GPIO_ACTIVE_LOW>;
- };
-
- alarm1 {
- label = "udpu:green:alarm";
- gpios = <&gpionb 15 GPIO_ACTIVE_LOW>;
- };
-
- alarm2 {
- label = "udpu:red:alarm";
- gpios = <&gpionb 16 GPIO_ACTIVE_LOW>;
- };
- };
-
- sfp_eth0: sfp-eth0 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c0>;
- los-gpio = <&gpiosb 2 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&gpiosb 3 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&gpiosb 4 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>;
- };
-
- sfp_eth1: sfp-eth1 {
- compatible = "sff,sfp";
- i2c-bus = <&i2c1>;
- los-gpio = <&gpiosb 7 GPIO_ACTIVE_HIGH>;
- mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>;
- };
-};
-
-&sdhci0 {
- status = "okay";
- bus-width = <8>;
- mmc-ddr-1_8v;
- mmc-hs400-1_8v;
- marvell,pad-type = "fixed-1-8v";
- non-removable;
- no-sd;
- no-sdio;
-};
-
-&spi0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&spi_quad_pins>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <54000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
- /* only bootloader is located on the SPI */
- partition@0 {
- label = "uboot";
- reg = <0 0x400000>;
- };
- };
- };
-};
-
-&i2c0 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
-};
-
-&i2c1 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
-
- lm75@48 {
- status = "okay";
- compatible = "lm75";
- reg = <0x48>;
- };
-
- lm75@49 {
- status = "okay";
- compatible = "lm75";
- reg = <0x49>;
- };
-};
-
-ð0 {
- status = "okay";
- phy-mode = "sgmii";
- managed = "in-band-status";
- sfp = <&sfp_eth0>;
-};
-
-ð1 {
- status = "okay";
- phy-mode = "sgmii";
- managed = "in-band-status";
- sfp = <&sfp_eth1>;
-};
-
-&usb3 {
- status = "okay";
-};
-
-&uart0 {
- status = "okay";
-};
+++ /dev/null
---- a/arch/arm/boot/dts/armada-385-linksys.dtsi
-+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
-@@ -212,11 +212,19 @@
- &pcie1 {
- /* Marvell 88W8864, 5GHz-only */
- status = "okay";
-+
-+ mwlwifi {
-+ marvell,2ghz = <0>;
-+ };
- };
-
- &pcie2 {
- /* Marvell 88W8864, 2GHz-only */
- status = "okay";
-+
-+ mwlwifi {
-+ marvell,5ghz = <0>;
-+ };
- };
-
- &pinctrl {
---- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
-@@ -142,3 +142,205 @@
- };
- };
- };
-+
-+&pcie1 {
-+ mwlwifi {
-+ marvell,chainmask = <2 2>;
-+ marvell,powertable {
-+ AU =
-+ <36 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <40 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <44 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <48 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <52 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <56 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <60 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <64 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <100 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <104 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <108 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <112 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <116 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <120 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <124 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <128 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <132 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <136 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <140 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <149 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
-+ <153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
-+ <157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
-+ <161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
-+ <165 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>;
-+ CA =
-+ <36 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>,
-+ <40 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>,
-+ <44 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>,
-+ <48 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>,
-+ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <149 0 0x1a 0x1a 0x18 0x17 0x19 0x19 0x17 0x15 0x18 0x18 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+ <153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+ <157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+ <161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+ <165 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>;
-+ CN =
-+ <36 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <40 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <44 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <48 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <52 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <56 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <60 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <64 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <100 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <104 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <108 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <112 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <116 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <120 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <124 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <128 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <132 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <136 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <140 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <149 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x11 0x11 0x11 0x11 0 0xf>,
-+ <153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>,
-+ <157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>,
-+ <161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>,
-+ <165 0 0x15 0x15 0x15 0x15 0x16 0x16 0x16 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>;
-+ ETSI =
-+ <36 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <40 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <44 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <48 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <52 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <56 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <60 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <64 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <100 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <104 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <108 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <112 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <116 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <120 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <124 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <128 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <132 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <136 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <140 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <149 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>;
-+ FCC =
-+ <36 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <40 0 0x19 0x19 0x18 0x17 0x19 0x19 0x17 0x15 0x17 0x17 0x17 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+ <44 0 0x19 0x19 0x18 0x17 0x19 0x19 0x17 0x15 0x17 0x17 0x17 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+ <48 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x17 0x17 0x17 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <149 0 0x1a 0x1a 0x18 0x17 0x19 0x19 0x17 0x15 0x18 0x18 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+ <153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+ <157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+ <161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+ <165 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>;
-+ };
-+ };
-+};
-+
-+&pcie2 {
-+ mwlwifi {
-+ marvell,chainmask = <2 2>;
-+ marvell,powertable {
-+ AU =
-+ <1 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>;
-+ CA =
-+ <1 0 0x19 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x10 0x10 0x10 0x10 0x00 0x00 0x00 0x00 0 0xf>,
-+ <2 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+ <3 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+ <4 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+ <5 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+ <6 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+ <7 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+ <8 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+ <9 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+ <10 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+ <11 0 0x19 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x00 0x00 0x00 0x00 0 0xf>;
-+ CN =
-+ <1 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <12 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <13 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <14 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>;
-+ ETSI =
-+ <1 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <12 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <13 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>;
-+ FCC =
-+ <1 0 0x19 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0x19 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x0 0x0 0x0 0x0 0 0xf>;
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
-@@ -142,3 +142,205 @@
- };
- };
- };
-+
-+&pcie1 {
-+ mwlwifi {
-+ marvell,chainmask = <4 4>;
-+ marvell,powertable {
-+ AU =
-+ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <149 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+ <153 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+ <157 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+ <161 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+ <165 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>;
-+ CA =
-+ <36 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <40 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <44 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <48 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
-+ CN =
-+ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <149 0 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+ <165 0 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>;
-+ ETSI =
-+ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <149 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>;
-+ FCC =
-+ <36 0 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0 0xf>,
-+ <40 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
-+ <44 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
-+ <48 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
-+ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
-+ };
-+ };
-+};
-+
-+&pcie2 {
-+ mwlwifi {
-+ marvell,chainmask = <4 4>;
-+ marvell,powertable {
-+ AU =
-+ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
-+ CA =
-+ <1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
-+ CN =
-+ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <14 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
-+ ETSI =
-+ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
-+ FCC =
-+ <1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
-@@ -142,3 +142,205 @@
- };
- };
- };
-+
-+&pcie1 {
-+ mwlwifi {
-+ marvell,chainmask = <4 4>;
-+ marvell,powertable {
-+ AU =
-+ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <149 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+ <153 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+ <157 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+ <161 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+ <165 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>;
-+ CA =
-+ <36 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <40 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <44 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <48 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
-+ CN =
-+ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <149 0 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+ <165 0 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>;
-+ ETSI =
-+ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <149 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>;
-+ FCC =
-+ <36 0 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0 0xf>,
-+ <40 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
-+ <44 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
-+ <48 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
-+ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
-+ };
-+ };
-+};
-+
-+&pcie2 {
-+ mwlwifi {
-+ marvell,chainmask = <4 4>;
-+ marvell,powertable {
-+ AU =
-+ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
-+ CA =
-+ <1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
-+ CN =
-+ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <14 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
-+ ETSI =
-+ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
-+ FCC =
-+ <1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/armada-385-linksys-rango.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-rango.dts
-@@ -157,6 +157,18 @@
- };
- };
-
-+&pcie1 {
-+ mwlwifi {
-+ marvell,chainmask = <4 4>;
-+ };
-+};
-+
-+&pcie2 {
-+ mwlwifi {
-+ marvell,chainmask = <4 4>;
-+ };
-+};
-+
- &sdhci {
- pinctrl-names = "default";
- pinctrl-0 = <&sdhci_pins>;
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -272,12 +272,100 @@
- pcie@2,0 {
- /* Port 0, Lane 1 */
- status = "okay";
-+
-+ mwlwifi {
-+ marvell,5ghz = <0>;
-+ marvell,chainmask = <4 4>;
-+ marvell,powertable {
-+ FCC =
-+ <1 0 0x17 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0x17 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>;
-+
-+ ETSI =
-+ <1 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <12 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <13 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>;
-+ };
-+ };
- };
-
- /* Second mini-PCIe port */
- pcie@3,0 {
- /* Port 0, Lane 3 */
- status = "okay";
-+
-+ mwlwifi {
-+ marvell,2ghz = <0>;
-+ marvell,chainmask = <4 4>;
-+ marvell,powertable {
-+ FCC =
-+ <36 0 0x8 0x8 0x8 0x8 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <40 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <44 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <48 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <52 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
-+ <56 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
-+ <60 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
-+ <64 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
-+ <100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <149 0 0x16 0x16 0x16 0x16 0x14 0x14 0x14 0x14 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
-+ <153 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
-+ <157 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
-+ <161 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
-+ <165 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>;
-+
-+ ETSI =
-+ <36 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <40 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <44 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <48 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <52 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <56 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <60 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <64 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <100 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <104 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <108 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <112 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <116 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <120 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <124 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <128 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <132 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <136 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <140 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <149 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>;
-+ };
-+ };
- };
- };
-
+++ /dev/null
-From 172230195068703b78ad5733a09492f5d6814c09 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Tue, 28 Feb 2017 14:15:50 +0100
-Subject: [PATCH] ARM: dts: armada: Add default trigger for sata led
-
-In others board we have the sata led set to function
-with the sata led trigger by default.
-This patch makes the same for these board that have sata
-led but get disabled by not associating it to any trigger.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Acked-by: Jason Cooper <jason@lakedaemon.net>
-Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
----
- arch/arm/boot/dts/armada-385-linksys-caiman.dts | 1 +
- arch/arm/boot/dts/armada-385-linksys-cobra.dts | 1 +
- arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 1 +
- 3 files changed, 3 insertions(+)
-
---- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
-@@ -68,6 +68,7 @@
-
- sata {
- label = "caiman:white:sata";
-+ linux,default-trigger = "disk-activity";
- };
- };
-
---- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
-@@ -68,6 +68,7 @@
-
- sata {
- label = "cobra:white:sata";
-+ linux,default-trigger = "disk-activity";
- };
- };
-
+++ /dev/null
-Newer Linksys boards might come with a Winbond W29N02GV which can be
-configured in different ways. Make sure we configure it the same way
-as the older chips so everything keeps working.
-
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
-
---- a/arch/arm/boot/dts/armada-385-linksys.dtsi
-+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
-@@ -148,6 +148,8 @@
- reg = <0>;
- label = "pxa3xx_nand-0";
- nand-rb = <0>;
-+ nand-ecc-strength = <4>;
-+ nand-ecc-step-size = <512>;
- marvell,nand-keep-config;
- nand-on-flash-bbt;
- };
+++ /dev/null
-From 71270226b14733a4b1f2cde58ea9265caa50b38d Mon Sep 17 00:00:00 2001
-From: Adrian Panella <ianchi74@outlook.com>
-Date: Thu, 9 Mar 2017 09:37:17 +0100
-Subject: [PATCH 67/69] generic: Mangle bootloader's kernel arguments
-
-The command-line arguments provided by the boot loader will be
-appended to a new device tree property: bootloader-args.
-If there is a property "append-rootblock" in DT under /chosen
-and a root= option in bootloaders command line it will be parsed
-and added to DT bootargs with the form: <append-rootblock>XX.
-Only command line ATAG will be processed, the rest of the ATAGs
-sent by bootloader will be ignored.
-This is usefull in dual boot systems, to get the current root partition
-without afecting the rest of the system.
-
-Signed-off-by: Adrian Panella <ianchi74@outlook.com>
-
-This patch has been modified to be mvebu specific. The original patch
-did not pass the bootloader cmdline on if no append-rootblock stanza
-was found, resulting in blank cmdline and failure to boot.
-
-Signed-off-by: Michael Gray <michael.gray@lantisproject.com>
----
- arch/arm/Kconfig | 11 +++++
- arch/arm/boot/compressed/atags_to_fdt.c | 72 ++++++++++++++++++++++++++++++++-
- init/main.c | 16 ++++++++
- 3 files changed, 98 insertions(+), 1 deletion(-)
-
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -1926,6 +1926,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
- The command-line arguments provided by the boot loader will be
- appended to the the device tree bootargs property.
-
-+config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
-+ bool "Append rootblock parsing bootloader's kernel arguments"
-+ help
-+ The command-line arguments provided by the boot loader will be
-+ appended to a new device tree property: bootloader-args.
-+ If there is a property "append-rootblock" in DT under /chosen
-+ and a root= option in bootloaders command line it will be parsed
-+ and added to DT bootargs with the form: <append-rootblock>XX.
-+ Only command line ATAG will be processed, the rest of the ATAGs
-+ sent by bootloader will be ignored.
-+
- endchoice
-
- config CMDLINE
---- a/arch/arm/boot/compressed/atags_to_fdt.c
-+++ b/arch/arm/boot/compressed/atags_to_fdt.c
-@@ -4,6 +4,8 @@
-
- #if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND)
- #define do_extend_cmdline 1
-+#elif defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+#define do_extend_cmdline 1
- #else
- #define do_extend_cmdline 0
- #endif
-@@ -67,6 +69,65 @@ static uint32_t get_cell_size(const void
- return cell_size;
- }
-
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+
-+static char *append_rootblock(char *dest, const char *str, int len, void *fdt)
-+{
-+ char *ptr, *end;
-+ char *root="root=";
-+ int i, l;
-+ const char *rootblock;
-+
-+ //ARM doesn't have __HAVE_ARCH_STRSTR, so search manually
-+ ptr = str - 1;
-+
-+ do {
-+ //first find an 'r' at the begining or after a space
-+ do {
-+ ptr++;
-+ ptr = strchr(ptr, 'r');
-+ if(!ptr) return dest;
-+
-+ } while (ptr != str && *(ptr-1) != ' ');
-+
-+ //then check for the rest
-+ for(i = 1; i <= 4; i++)
-+ if(*(ptr+i) != *(root+i)) break;
-+
-+ } while (i != 5);
-+
-+ end = strchr(ptr, ' ');
-+ end = end ? (end - 1) : (strchr(ptr, 0) - 1);
-+
-+ //find partition number (assumes format root=/dev/mtdXX | /dev/mtdblockXX | yy:XX )
-+ for( i = 0; end >= ptr && *end >= '0' && *end <= '9'; end--, i++);
-+ ptr = end + 1;
-+
-+ /* if append-rootblock property is set use it to append to command line */
-+ rootblock = getprop(fdt, "/chosen", "append-rootblock", &l);
-+ if(rootblock != NULL) {
-+ if(*dest != ' ') {
-+ *dest = ' ';
-+ dest++;
-+ len++;
-+ }
-+ if (len + l + i <= COMMAND_LINE_SIZE) {
-+ memcpy(dest, rootblock, l);
-+ dest += l - 1;
-+ memcpy(dest, ptr, i);
-+ dest += i;
-+ }
-+ } else {
-+ len = strlen(str);
-+ if (len + 1 < COMMAND_LINE_SIZE) {
-+ memcpy(dest, str, len);
-+ dest += len;
-+ }
-+ }
-+ return dest;
-+}
-+#endif
-+
- static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline)
- {
- char cmdline[COMMAND_LINE_SIZE];
-@@ -86,12 +147,21 @@ static void merge_fdt_bootargs(void *fdt
-
- /* and append the ATAG_CMDLINE */
- if (fdt_cmdline) {
-+
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+ //save original bootloader args
-+ //and append ubi.mtd with root partition number to current cmdline
-+ setprop_string(fdt, "/chosen", "bootloader-args", fdt_cmdline);
-+ ptr = append_rootblock(ptr, fdt_cmdline, len, fdt);
-+
-+#else
- len = strlen(fdt_cmdline);
- if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) {
- *ptr++ = ' ';
- memcpy(ptr, fdt_cmdline, len);
- ptr += len;
- }
-+#endif
- }
- *ptr = '\0';
-
-@@ -148,7 +218,9 @@ int atags_to_fdt(void *atag_list, void *
- else
- setprop_string(fdt, "/chosen", "bootargs",
- atag->u.cmdline.cmdline);
-- } else if (atag->hdr.tag == ATAG_MEM) {
-+ }
-+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
-+ else if (atag->hdr.tag == ATAG_MEM) {
- if (memcount >= sizeof(mem_reg_property)/4)
- continue;
- if (!atag->u.mem.size)
-@@ -187,6 +259,10 @@ int atags_to_fdt(void *atag_list, void *
- setprop(fdt, "/memory", "reg", mem_reg_property,
- 4 * memcount * memsize);
- }
-+#else
-+
-+ }
-+#endif
-
- return fdt_pack(fdt);
- }
---- a/init/main.c
-+++ b/init/main.c
-@@ -102,6 +102,10 @@
- #define CREATE_TRACE_POINTS
- #include <trace/events/initcall.h>
-
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+#include <linux/of.h>
-+#endif
-+
- static int kernel_init(void *);
-
- extern void init_IRQ(void);
-@@ -591,6 +595,18 @@ asmlinkage __visible void __init start_k
- page_alloc_init();
-
- pr_notice("Kernel command line: %s\n", boot_command_line);
-+
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+ //Show bootloader's original command line for reference
-+ if(of_chosen) {
-+ const char *prop = of_get_property(of_chosen, "bootloader-args", NULL);
-+ if(prop)
-+ pr_notice("Bootloader command line (ignored): %s\n", prop);
-+ else
-+ pr_notice("Bootloader command line not present\n");
-+ }
-+#endif
-+
- /* parameters may set static keys */
- jump_label_init();
- parse_early_param();
+++ /dev/null
-The WRT1900AC among other Linksys routers uses a dual-firmware layout.
-Dynamically rename the active partition to "ubi".
-
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
-
---- a/drivers/mtd/ofpart.c
-+++ b/drivers/mtd/ofpart.c
-@@ -25,6 +25,8 @@ static bool node_has_compatible(struct d
- return of_get_property(pp, "compatible", NULL);
- }
-
-+static int mangled_rootblock;
-+
- static int parse_fixed_partitions(struct mtd_info *master,
- const struct mtd_partition **pparts,
- struct mtd_part_parser_data *data)
-@@ -33,6 +35,7 @@ static int parse_fixed_partitions(struct
- struct device_node *mtd_node;
- struct device_node *ofpart_node;
- const char *partname;
-+ const char *owrtpart = "ubi";
- struct device_node *pp;
- int nr_parts, i, ret = 0;
- bool dedicated = true;
-@@ -110,9 +113,13 @@ static int parse_fixed_partitions(struct
- parts[i].size = of_read_number(reg + a_cells, s_cells);
- parts[i].of_node = pp;
-
-- partname = of_get_property(pp, "label", &len);
-- if (!partname)
-- partname = of_get_property(pp, "name", &len);
-+ if (mangled_rootblock && (i == mangled_rootblock)) {
-+ partname = owrtpart;
-+ } else {
-+ partname = of_get_property(pp, "label", &len);
-+ if (!partname)
-+ partname = of_get_property(pp, "name", &len);
-+ }
- parts[i].name = partname;
-
- if (of_get_property(pp, "read-only", &len))
-@@ -219,6 +226,18 @@ static int __init ofpart_parser_init(voi
- return 0;
- }
-
-+static int __init active_root(char *str)
-+{
-+ get_option(&str, &mangled_rootblock);
-+
-+ if (!mangled_rootblock)
-+ return 1;
-+
-+ return 1;
-+}
-+
-+__setup("mangled_rootblock=", active_root);
-+
- static void __exit ofpart_parser_exit(void)
- {
- deregister_mtd_parser(&ofpart_parser);
+++ /dev/null
---- a/arch/arm/boot/dts/armada-xp.dtsi
-+++ b/arch/arm/boot/dts/armada-xp.dtsi
-@@ -237,12 +237,10 @@
- };
-
- &i2c0 {
-- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
- reg = <0x11000 0x100>;
- };
-
- &i2c1 {
-- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
- reg = <0x11100 0x100>;
- };
-
+++ /dev/null
---- a/arch/arm/boot/dts/armada-388-rd.dts
-+++ b/arch/arm/boot/dts/armada-388-rd.dts
-@@ -103,6 +103,16 @@
- compatible = "st,m25p128", "jedec,spi-nor";
- reg = <0>; /* Chip select 0 */
- spi-max-frequency = <108000000>;
-+
-+ partition@0 {
-+ label = "uboot";
-+ reg = <0 0x400000>;
-+ };
-+
-+ partition@1 {
-+ label = "firmware";
-+ reg = <0x400000 0xc00000>;
-+ };
- };
- };
-
+++ /dev/null
-From 9861f93a59142a3131870df2521eb2deb73026d7 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Tue, 13 Jan 2015 11:14:09 +0100
-Subject: [PATCH 2/2] ARM: mvebu: 385-ap: Add partitions
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/armada-385-db-ap.dts | 15 +++++++++++++++
- 1 file changed, 15 insertions(+)
-
---- a/arch/arm/boot/dts/armada-385-db-ap.dts
-+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
-@@ -218,19 +218,19 @@
- #size-cells = <1>;
-
- partition@0 {
-- label = "U-Boot";
-+ label = "u-boot";
- reg = <0x00000000 0x00800000>;
- read-only;
- };
-
- partition@800000 {
-- label = "uImage";
-+ label = "kernel";
- reg = <0x00800000 0x00400000>;
- read-only;
- };
-
- partition@c00000 {
-- label = "Root";
-+ label = "ubi";
- reg = <0x00c00000 0x3f400000>;
- };
- };
+++ /dev/null
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -532,3 +532,7 @@
- };
- };
- };
-+
-+&coherencyfab {
-+ broken-idle;
-+};
+++ /dev/null
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -248,7 +248,7 @@
-
- port@4 {
- reg = <4>;
-- label = "internet";
-+ label = "wan";
- };
-
- port@5 {
+++ /dev/null
---- a/arch/arm/boot/dts/armada-385-linksys.dtsi
-+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
-@@ -14,6 +14,13 @@
- compatible = "linksys,armada385", "marvell,armada385",
- "marvell,armada380";
-
-+ aliases {
-+ led-boot = &led_power;
-+ led-failsafe = &led_power;
-+ led-running = &led_power;
-+ led-upgrade = &led_power;
-+ };
-+
- chosen {
- stdout-path = "serial0:115200n8";
- };
-@@ -71,7 +78,7 @@
- pinctrl-0 = <&gpio_leds_pins>;
- pinctrl-names = "default";
-
-- power {
-+ led_power: power {
- gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -26,6 +26,13 @@
- compatible = "linksys,mamba", "marvell,armadaxp-mv78230",
- "marvell,armadaxp", "marvell,armada-370-xp";
-
-+ aliases {
-+ led-boot = &led_power;
-+ led-failsafe = &led_power;
-+ led-running = &led_power;
-+ led-upgrade = &led_power;
-+ };
-+
- chosen {
- bootargs = "console=ttyS0,115200";
- stdout-path = &uart0;
-@@ -197,7 +204,7 @@
- pinctrl-0 = <&power_led_pin>;
- pinctrl-names = "default";
-
-- power {
-+ led_power: power {
- label = "mamba:white:power";
- gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
- default-state = "on";
+++ /dev/null
---- a/arch/arm/boot/dts/armada-385-linksys.dtsi
-+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
-@@ -116,7 +116,7 @@
- };
-
- ð2 {
-- status = "okay";
-+ status = "disabled";
- phy-mode = "sgmii";
- buffer-manager = <&bm>;
- bm,pool-long = <2>;
-@@ -200,10 +200,10 @@
- label = "wan";
- };
-
-- port@5 {
-- reg = <5>;
-+ port@6 {
-+ reg = <6>;
- label = "cpu";
-- ethernet = <ð2>;
-+ ethernet = <ð0>;
-
- fixed-link {
- speed = <1000>;
+++ /dev/null
---- a/arch/arm/boot/dts/armada-385-linksys-rango.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-rango.dts
-@@ -12,8 +12,8 @@
-
- / {
- model = "Linksys WRT3200ACM";
-- compatible = "linksys,rango", "linksys,armada385", "marvell,armada385",
-- "marvell,armada380";
-+ compatible = "linksys,wrt3200acm", "linksys,rango", "linksys,armada385",
-+ "marvell,armada385", "marvell,armada380";
- };
-
- &expander0 {
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -22,9 +22,10 @@
- #include "armada-xp-mv78230.dtsi"
-
- / {
-- model = "Linksys WRT1900AC";
-- compatible = "linksys,mamba", "marvell,armadaxp-mv78230",
-- "marvell,armadaxp", "marvell,armada-370-xp";
-+ model = "Linksys WRT1900AC v1";
-+ compatible = "linksys,wrt1900ac-v1", "linksys,mamba",
-+ "marvell,armadaxp-mv78230", "marvell,armadaxp",
-+ "marvell,armada-370-xp";
-
- aliases {
- led-boot = &led_power;
---- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
-@@ -9,8 +9,9 @@
- #include "armada-385-linksys.dtsi"
-
- / {
-- model = "Linksys WRT1900ACv2";
-- compatible = "linksys,cobra", "linksys,armada385", "marvell,armada385",
-+ model = "Linksys WRT1900AC v2";
-+ compatible = "linksys,wrt1900ac-v2", "linksys,cobra",
-+ "linksys,armada385", "marvell,armada385",
- "marvell,armada380";
- };
-
---- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
-@@ -10,8 +10,8 @@
-
- / {
- model = "Linksys WRT1200AC";
-- compatible = "linksys,caiman", "linksys,armada385", "marvell,armada385",
-- "marvell,armada380";
-+ compatible = "linksys,wrt1200ac", "linksys,caiman", "linksys,armada385",
-+ "marvell,armada385", "marvell,armada380";
- };
-
- &expander0 {
---- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
-@@ -10,7 +10,8 @@
-
- / {
- model = "Linksys WRT1900ACS";
-- compatible = "linksys,shelby", "linksys,armada385", "marvell,armada385",
-+ compatible = "linksys,wrt1900acs", "linksys,shelby",
-+ "linksys,armada385", "marvell,armada385",
- "marvell,armada380";
- };
-
+++ /dev/null
---- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
-@@ -10,8 +10,9 @@
- #include <dt-bindings/gpio/gpio.h>
-
- / {
-- model = "Marvell 8040 MACCHIATOBin";
-- compatible = "marvell,armada8040-mcbin", "marvell,armada8040",
-+ model = "Marvell 8040 MACCHIATOBin Double-shot";
-+ compatible = "marvell,armada8040-mcbin-doubleshot",
-+ "marvell,armada8040-mcbin", "marvell,armada8040",
- "marvell,armada-ap806-quad", "marvell,armada-ap806";
-
- chosen {
+++ /dev/null
-The hardware queue scheduling is apparently configured with fixed
-priorities, which creates a nasty fairness issue where traffic from one
-CPU can starve traffic from all other CPUs.
-
-Work around this issue by forcing all tx packets to go through one CPU,
-until this issue is fixed properly.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -4271,6 +4271,15 @@ static int mvneta_ethtool_set_eee(struct
- return phylink_ethtool_set_eee(pp->phylink, eee);
- }
-
-+static u16 mvneta_select_queue(struct net_device *dev, struct sk_buff *skb,
-+ struct net_device *sb_dev,
-+ select_queue_fallback_t fallback)
-+{
-+ /* XXX: hardware queue scheduling is broken,
-+ * use only one queue until it is fixed */
-+ return 0;
-+}
-+
- static const struct net_device_ops mvneta_netdev_ops = {
- .ndo_open = mvneta_open,
- .ndo_stop = mvneta_stop,
-@@ -4281,6 +4290,7 @@ static const struct net_device_ops mvnet
- .ndo_fix_features = mvneta_fix_features,
- .ndo_get_stats64 = mvneta_get_stats64,
- .ndo_do_ioctl = mvneta_ioctl,
-+ .ndo_select_queue = mvneta_select_queue,
- };
-
- static const struct ethtool_ops mvneta_eth_tool_ops = {
+++ /dev/null
-From c28b2d367da8a471482e6a4aa8337ab6369a80c2 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@arm.linux.org.uk>
-Date: Sat, 3 Oct 2015 09:13:05 +0100
-Subject: cpuidle: mvebu: indicate failure to enter deeper sleep states
-
-The cpuidle ->enter method expects the return value to be the sleep
-state we entered. Returning negative numbers or other codes is not
-permissible since coupled CPU idle was merged.
-
-At least some of the mvebu_v7_cpu_suspend() implementations return the
-value from cpu_suspend(), which returns zero if the CPU vectors back
-into the kernel via cpu_resume() (the success case), or the non-zero
-return value of the suspend actor, or one (failure cases).
-
-We do not want to be returning the failure case value back to CPU idle
-as that indicates that we successfully entered one of the deeper idle
-states. Always return zero instead, indicating that we slept for the
-shortest amount of time.
-
-Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
----
- drivers/cpuidle/cpuidle-mvebu-v7.c | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
---- a/drivers/cpuidle/cpuidle-mvebu-v7.c
-+++ b/drivers/cpuidle/cpuidle-mvebu-v7.c
-@@ -39,8 +39,12 @@ static int mvebu_v7_enter_idle(struct cp
- ret = mvebu_v7_cpu_suspend(deepidle);
- cpu_pm_exit();
-
-+ /*
-+ * If we failed to enter the desired state, indicate that we
-+ * slept lightly.
-+ */
- if (ret)
-- return ret;
-+ return 0;
-
- return index;
- }
+++ /dev/null
-From 287b9df160b6159f8d385424904f8bac501280c1 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Sat, 9 Jul 2016 10:58:16 +0100
-Subject: pci: mvebu: time out reset on link up
-
-If the port reports that the link is up while we are resetting, there's
-little point in waiting for the full duration.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/pci/controller/pci-mvebu.c | 20 ++++++++++++++------
- 1 file changed, 14 insertions(+), 6 deletions(-)
-
---- a/drivers/pci/controller/pci-mvebu.c
-+++ b/drivers/pci/controller/pci-mvebu.c
-@@ -1112,6 +1112,7 @@ static int mvebu_pcie_powerup(struct mve
-
- if (port->reset_gpio) {
- u32 reset_udelay = PCI_PM_D3COLD_WAIT * 1000;
-+ unsigned int i;
-
- of_property_read_u32(port->dn, "reset-delay-us",
- &reset_udelay);
-@@ -1119,7 +1120,13 @@ static int mvebu_pcie_powerup(struct mve
- udelay(100);
-
- gpiod_set_value_cansleep(port->reset_gpio, 0);
-- msleep(reset_udelay / 1000);
-+ for (i = 0; i < reset_udelay; i += 1000) {
-+ if (mvebu_pcie_link_up(port))
-+ break;
-+ msleep(1);
-+ }
-+
-+ printk("%s: reset completed in %dus\n", port->name, i);
- }
-
- return 0;
-@@ -1283,15 +1290,16 @@ static int mvebu_pcie_probe(struct platf
- if (!child)
- continue;
-
-- ret = mvebu_pcie_powerup(port);
-- if (ret < 0)
-- continue;
--
- port->base = mvebu_pcie_map_registers(pdev, child, port);
- if (IS_ERR(port->base)) {
- dev_err(dev, "%s: cannot map registers\n", port->name);
- port->base = NULL;
-- mvebu_pcie_powerdown(port);
-+ continue;
-+ }
-+
-+ ret = mvebu_pcie_powerup(port);
-+ if (ret < 0) {
-+ port->base = NULL;
- continue;
- }
-
+++ /dev/null
-From 8137da20701c776ad3481115305a5e8e410871ba Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Tue, 29 Nov 2016 10:15:45 +0000
-Subject: ARM: dts: armada388-clearfog: emmc on clearfog base
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- arch/arm/boot/dts/armada-388-clearfog-base.dts | 1 +
- .../dts/armada-38x-solidrun-microsom-emmc.dtsi | 62 ++++++++++++++++++++++
- 2 files changed, 63 insertions(+)
- create mode 100644 arch/arm/boot/dts/armada-38x-solidrun-microsom-emmc.dtsi
-
---- a/arch/arm/boot/dts/armada-388-clearfog-base.dts
-+++ b/arch/arm/boot/dts/armada-388-clearfog-base.dts
-@@ -7,6 +7,7 @@
-
- /dts-v1/;
- #include "armada-388-clearfog.dtsi"
-+#include "armada-38x-solidrun-microsom-emmc.dtsi"
-
- / {
- model = "SolidRun Clearfog Base A1";
---- /dev/null
-+++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom-emmc.dtsi
-@@ -0,0 +1,62 @@
-+/*
-+ * Device Tree file for SolidRun Armada 38x Microsom add-on for eMMC
-+ *
-+ * Copyright (C) 2015 Russell King
-+ *
-+ * This board is in development; the contents of this file work with
-+ * the A1 rev 2.0 of the board, which does not represent final
-+ * production board. Things will change, don't expect this file to
-+ * remain compatible info the future.
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This file is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ *
-+ * This file is distributed in the hope that it will be useful
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+/ {
-+ soc {
-+ internal-regs {
-+ sdhci@d8000 {
-+ bus-width = <4>;
-+ no-1-8-v;
-+ non-removable;
-+ pinctrl-0 = <µsom_sdhci_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+ wp-inverted;
-+ };
-+ };
-+ };
-+};
+++ /dev/null
-From 09a0122c74ec076e08512f1b00b7ccb8a450282f Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@arm.linux.org.uk>
-Date: Tue, 29 Nov 2016 10:15:43 +0000
-Subject: ARM: dts: armada388-clearfog: document MPP usage
-
-Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
----
- arch/arm/boot/dts/armada-388-clearfog-base.dts | 51 ++++++++++++++++++++++++++
- arch/arm/boot/dts/armada-388-clearfog.dts | 50 +++++++++++++++++++++++++
- 2 files changed, 101 insertions(+)
-
---- a/arch/arm/boot/dts/armada-388-clearfog-base.dts
-+++ b/arch/arm/boot/dts/armada-388-clearfog-base.dts
-@@ -67,3 +67,54 @@
- marvell,function = "gpio";
- };
- };
-+
-+/*
-+MPP
-+18: pu gpio pca9655 int
-+19: gpio phy reset
-+20: pu gpio sd0 detect
-+21: sd0:cmd
-+22: pd gpio mikro int
-+23:
-+
-+24: ua1:rxd mikro rx
-+25: ua1:txd mikro tx
-+26: pu i2c1:sck
-+27: pu i2c1:sda
-+28: sd0:clk
-+29: pd gpio mikro rst
-+30:
-+31:
-+
-+32:
-+33:
-+34:
-+35:
-+36:
-+37: sd0:d3
-+38: sd0:d0
-+39: sd0:d1
-+
-+40: sd0:d2
-+41:
-+42:
-+43: spi1:cs2 mikro cs
-+44: gpio rear button sw3
-+45: ref:clk_out0 phy#0 clock
-+46: ref:clk_out1 phy#1 clock
-+47:
-+
-+48: gpio J18 spare gpio
-+49: gpio U10 I2C_IRQ(GNSS)
-+50: gpio board id?
-+51:
-+52:
-+53:
-+54: gpio mikro pwm
-+55:
-+
-+56: pu spi1:mosi mikro mosi
-+57: pd spi1:sck mikro sck
-+58: spi1:miso mikro miso
-+59:
-+*/
---- a/arch/arm/boot/dts/armada-388-clearfog.dts
-+++ b/arch/arm/boot/dts/armada-388-clearfog.dts
-@@ -236,3 +236,53 @@
- */
- pinctrl-0 = <&spi1_pins &clearfog_spi1_cs_pins &mikro_spi_pins>;
- };
-+/*
-++#define A38x_CUSTOMER_BOARD_1_MPP16_23 0x00400011
-+MPP18: gpio ? (pca9655 int?)
-+MPP19: gpio ? (clkreq?)
-+MPP20: gpio ? (sd0 detect)
-+MPP21: sd0:cmd x sd0
-+MPP22: gpio x mikro int
-+MPP23: gpio x switch irq
-++#define A38x_CUSTOMER_BOARD_1_MPP24_31 0x22043333
-+MPP24: ua1:rxd x mikro rx
-+MPP25: ua1:txd x mikro tx
-+MPP26: i2c1:sck x mikro sck
-+MPP27: i2c1:sda x mikro sda
-+MPP28: sd0:clk x sd0
-+MPP29: gpio x mikro rst
-+MPP30: ge1:txd2 ? (config)
-+MPP31: ge1:txd3 ? (config)
-++#define A38x_CUSTOMER_BOARD_1_MPP32_39 0x44400002
-+MPP32: ge1:txctl ? (unused)
-+MPP33: gpio ? (pic_com0)
-+MPP34: gpio x rear button (pic_com1)
-+MPP35: gpio ? (pic_com2)
-+MPP36: gpio ? (unused)
-+MPP37: sd0:d3 x sd0
-+MPP38: sd0:d0 x sd0
-+MPP39: sd0:d1 x sd0
-++#define A38x_CUSTOMER_BOARD_1_MPP40_47 0x41144004
-+MPP40: sd0:d2 x sd0
-+MPP41: gpio x switch reset
-+MPP42: gpio ? sw1-1
-+MPP43: spi1:cs2 x mikro cs
-+MPP44: sata3:prsnt ? (unused)
-+MPP45: ref:clk_out0 ?
-+MPP46: ref:clk_out1 x switch clk
-+MPP47: 4 ? (unused)
-++#define A38x_CUSTOMER_BOARD_1_MPP48_55 0x40333333
-+MPP48: tdm:pclk
-+MPP49: tdm:fsync
-+MPP50: tdm:drx
-+MPP51: tdm:dtx
-+MPP52: tdm:int
-+MPP53: tdm:rst
-+MPP54: gpio ? (pwm)
-+MPP55: spi1:cs1 x slic
-++#define A38x_CUSTOMER_BOARD_1_MPP56_63 0x00004444
-+MPP56: spi1:mosi x mikro mosi
-+MPP57: spi1:sck x mikro sck
-+MPP58: spi1:miso x mikro miso
-+MPP59: spi1:cs0 x w25q32
-+*/
+++ /dev/null
-From eefe328439642101774f0f5c4ea0dc6ba1cfb687 Mon Sep 17 00:00:00 2001
-From: Ding Tao <miyatsu@qq.com>
-Date: Fri, 26 Oct 2018 11:50:27 +0000
-Subject: [PATCH] arm64: dts: marvell: armada37xx: Add emmc/sdio pinctrl
- definition
-
-Add emmc/sdio pinctrl definition for marvell armada37xx SoCs.
-
-Signed-off-by: Ding Tao <miyatsu@qq.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
-@@ -221,6 +221,11 @@
- groups = "uart2";
- function = "uart";
- };
-+
-+ mmc_pins: mmc-pins {
-+ groups = "emmc_nb";
-+ function = "emmc";
-+ };
- };
-
- nb_pm: syscon@14000 {
-@@ -253,6 +258,11 @@
- function = "mii";
- };
-
-+ sdio_pins: sdio-pins {
-+ groups = "sdio_sb";
-+ function = "sdio";
-+ };
-+
- };
-
- eth0: ethernet@30000 {
+++ /dev/null
-From 43ebc7c1b3ed8198b9acf3019eca16e722f7331c Mon Sep 17 00:00:00 2001
-From: Ding Tao <miyatsu@qq.com>
-Date: Fri, 26 Oct 2018 11:50:28 +0000
-Subject: [PATCH] arm64: dts: marvell: armada-37xx: Enable emmc on espressobin
-
-The ESPRESSObin board has a emmc interface available on U11: declare it
-and let the bootloader enable it if the emmc is present.
-
-[gregory.clement@bootlin.com: disable the emmc by default]
-Signed-off-by: Ding Tao <miyatsu@qq.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- .../dts/marvell/armada-3720-espressobin.dts | 22 +++++++++++++++++++
- 1 file changed, 22 insertions(+)
-
---- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-@@ -60,9 +60,31 @@
- cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>;
- marvell,pad-type = "sd";
- vqmmc-supply = <&vcc_sd_reg1>;
-+
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sdio_pins>;
- status = "okay";
- };
-
-+/* U11 */
-+&sdhci0 {
-+ non-removable;
-+ bus-width = <8>;
-+ mmc-ddr-1_8v;
-+ mmc-hs400-1_8v;
-+ marvell,xenon-emmc;
-+ marvell,xenon-tun-count = <9>;
-+ marvell,pad-type = "fixed-1-8v";
-+
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&mmc_pins>;
-+/*
-+ * This eMMC is not populated on all boards, so disable it by
-+ * default and let the bootloader enable it, if it is present
-+ */
-+ status = "disabled";
-+};
-+
- &spi0 {
- status = "okay";
-
+++ /dev/null
-From be893f672e340b56ca60f2f6c32fdd713a5852f5 Mon Sep 17 00:00:00 2001
-From: Kevin Mihelich <kevin@archlinuxarm.org>
-Date: Tue, 4 Jul 2017 19:25:28 -0600
-Subject: arm64: dts: marvell: armada37xx: Add eth0 alias
-
-Signed-off-by: Kevin Mihelich <kevin@archlinuxarm.org>
----
- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
-@@ -18,6 +18,7 @@
- #size-cells = <2>;
-
- aliases {
-+ ethernet0 = ð0;
- serial0 = &uart0;
- serial1 = &uart1;
- };
+++ /dev/null
-From 3217cdfe8a3eae76fafbebbe407be5985a7fd4c2 Mon Sep 17 00:00:00 2001
-From: Tomasz Maciej Nowak <tmn505@gmail.com>
-Date: Mon, 31 Dec 2018 14:18:50 +0100
-Subject: [PATCH] arm64: dts: armada-3720-espressobin: correct spi node
-
-The manufacturer of this board, ships it with various SPI NOR chips and
-increments U-Boot bootloader version along the time. There is no way to
-tell which is placed on the board since no revision bump takes place.
-This creates two issues.
-
-The first, cosmetic. Since the SPI chip may differ, there's message on
-boot stating that kernel expected w25q32dw and found different one. To
-correct this, remove optional device-specific compatible string. Being
-here lets replace bogus "spi-flash" string with proper one.
-
-The second is linked to partitions layout, it changed after commit [1]
-in Marvells downstream U-Boot fork, shifting environment location to the
-end of boot device. Since the new boards can have U-Boot with this
-change it can lead to improper results writing or reading from these
-partitions. We can't tell if users will update bootloader to recent
-version, so let's drop current layout.
-
-1. https://github.com/MarvellEmbeddedProcessors/u-boot-marvell/commit/81e7251252aefe1a6b829ed05f3586320cb45372
-
-Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
----
- .../dts/marvell/armada-3720-espressobin.dts | 18 +-----------------
- 1 file changed, 1 insertion(+), 17 deletions(-)
-
---- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-@@ -90,25 +90,9 @@
-
- flash@0 {
- reg = <0>;
-- compatible = "winbond,w25q32dw", "jedec,spi-flash";
-+ compatible = "jedec,spi-nor";
- spi-max-frequency = <104000000>;
- m25p,fast-read;
--
-- partitions {
-- compatible = "fixed-partitions";
-- #address-cells = <1>;
-- #size-cells = <1>;
--
-- partition@0 {
-- label = "uboot";
-- reg = <0 0x180000>;
-- };
--
-- partition@180000 {
-- label = "ubootenv";
-- reg = <0x180000 0x10000>;
-- };
-- };
- };
- };
-
+++ /dev/null
-From 6ea9a1ee9367fb35acff1c08a0dc4213ff4687a0 Mon Sep 17 00:00:00 2001
-From: Tomasz Maciej Nowak <tmn505@gmail.com>
-Date: Tue, 9 Apr 2019 15:53:42 +0200
-Subject: [PATCH] arm64: dts: marvell: armada-3720-espressobin: add ports
- phandle
-
-Instead of referencing the whole mdio node, add ports phandle to adjust
-port labels in dts for different hardware iterations of ESPRESSObin
-boards.
-
-Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
----
- arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-@@ -132,7 +132,7 @@
-
- dsa,member = <0 0>;
-
-- ports {
-+ ports: ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
+++ /dev/null
-From 5e79c0c381eb085a2aa2da175eedea1950f07520 Mon Sep 17 00:00:00 2001
-From: Tomasz Maciej Nowak <tomek_n@o2.pl>
-Date: Tue, 30 Apr 2019 15:37:34 +0200
-Subject: [PATCH] Revert "PCI: aardvark: Convert to use pci_host_probe()"
-
-This reverts commit c8e144f8ab00e6c4a070a932ef9c57db09aa41cf.
----
- drivers/pci/controller/pci-aardvark.c | 12 +++++++++++-
- 1 file changed, 11 insertions(+), 1 deletion(-)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -839,6 +839,7 @@ static int advk_pcie_probe(struct platfo
- struct device *dev = &pdev->dev;
- struct advk_pcie *pcie;
- struct resource *res;
-+ struct pci_bus *bus, *child;
- struct pci_host_bridge *bridge;
- int ret, irq;
-
-@@ -892,13 +893,22 @@ static int advk_pcie_probe(struct platfo
- bridge->map_irq = of_irq_parse_and_map_pci;
- bridge->swizzle_irq = pci_common_swizzle;
-
-- ret = pci_host_probe(bridge);
-+ ret = pci_scan_root_bus_bridge(bridge);
- if (ret < 0) {
- advk_pcie_remove_msi_irq_domain(pcie);
- advk_pcie_remove_irq_domain(pcie);
- return ret;
- }
-
-+ bus = bridge->bus;
-+
-+ pci_bus_size_bridges(bus);
-+ pci_bus_assign_resources(bus);
-+
-+ list_for_each_entry(child, &bus->children, node)
-+ pcie_bus_configure_settings(child);
-+
-+ pci_bus_add_devices(bus);
- return 0;
- }
-
+++ /dev/null
-From patchwork Thu Sep 28 12:58:34 2017
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v2,
- 3/7] PCI: aardvark: set host and device to the same MAX payload size
-X-Patchwork-Submitter: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-X-Patchwork-Id: 819587
-Message-Id: <20170928125838.11887-4-thomas.petazzoni@free-electrons.com>
-To: Bjorn Helgaas <bhelgaas@google.com>, linux-pci@vger.kernel.org
-Cc: Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
- Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>, Gregory Clement
- <gregory.clement@free-electrons.com>,
- Nadav Haklai <nadavh@marvell.com>, Hanna Hawa <hannah@marvell.com>,
- Yehuda Yitschak <yehuday@marvell.com>,
- linux-arm-kernel@lists.infradead.org, Antoine Tenart
- <antoine.tenart@free-electrons.com>, =?utf-8?q?Miqu=C3=A8l_Raynal?=
- <miquel.raynal@free-electrons.com>, Victor Gu <xigu@marvell.com>,
- Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Date: Thu, 28 Sep 2017 14:58:34 +0200
-From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-List-Id: <linux-pci.vger.kernel.org>
-
-From: Victor Gu <xigu@marvell.com>
-
-Since the Aardvark does not implement a PCIe root bus, the Linux PCIe
-subsystem will not align the MAX payload size between the host and the
-device. This patch ensures that the host and device have the same MAX
-payload size, fixing a number of problems with various PCIe devices.
-
-This is part of fixing bug
-https://bugzilla.kernel.org/show_bug.cgi?id=196339, this commit was
-reported as the user to be important to get a Intel 7260 mini-PCIe
-WiFi card working.
-
-Fixes: Fixes: 8c39d710363c1 ("PCI: aardvark: Add Aardvark PCI host controller driver")
-Signed-off-by: Victor Gu <xigu@marvell.com>
-Reviewed-by: Evan Wang <xswang@marvell.com>
-Reviewed-by: Nadav Haklai <nadavh@marvell.com>
-[Thomas: tweak commit log.]
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
----
- drivers/pci/controller/pci-aardvark.c | 60 ++++++++++++++++++++++++++++++++++++++++-
- 1 file changed, 59 insertions(+), 1 deletion(-)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -29,9 +29,11 @@
- #define PCIE_CORE_DEV_CTRL_STATS_REG 0xc8
- #define PCIE_CORE_DEV_CTRL_STATS_RELAX_ORDER_DISABLE (0 << 4)
- #define PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT 5
-+#define PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ 0x2
- #define PCIE_CORE_DEV_CTRL_STATS_SNOOP_DISABLE (0 << 11)
- #define PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SIZE_SHIFT 12
- #define PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SZ 0x2
-+#define PCIE_CORE_MPS_UNIT_BYTE 128
- #define PCIE_CORE_LINK_CTRL_STAT_REG 0xd0
- #define PCIE_CORE_LINK_L0S_ENTRY BIT(0)
- #define PCIE_CORE_LINK_TRAINING BIT(5)
-@@ -253,7 +255,8 @@ static void advk_pcie_setup_hw(struct ad
-
- /* Set PCIe Device Control and Status 1 PF0 register */
- reg = PCIE_CORE_DEV_CTRL_STATS_RELAX_ORDER_DISABLE |
-- (7 << PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT) |
-+ (PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ <<
-+ PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT) |
- PCIE_CORE_DEV_CTRL_STATS_SNOOP_DISABLE |
- (PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SZ <<
- PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SIZE_SHIFT);
-@@ -834,6 +837,58 @@ out_release_res:
- return err;
- }
-
-+static int advk_pcie_find_smpss(struct pci_dev *dev, void *data)
-+{
-+ u8 *smpss = data;
-+
-+ if (!dev)
-+ return 0;
-+
-+ if (!pci_is_pcie(dev))
-+ return 0;
-+
-+ if (*smpss > dev->pcie_mpss)
-+ *smpss = dev->pcie_mpss;
-+
-+ return 0;
-+}
-+
-+static int advk_pcie_bus_configure_mps(struct pci_dev *dev, void *data)
-+{
-+ int mps;
-+
-+ if (!dev)
-+ return 0;
-+
-+ if (!pci_is_pcie(dev))
-+ return 0;
-+
-+ mps = PCIE_CORE_MPS_UNIT_BYTE << *(u8 *)data;
-+ pcie_set_mps(dev, mps);
-+
-+ return 0;
-+}
-+
-+static void advk_pcie_configure_mps(struct pci_bus *bus, struct advk_pcie *pcie)
-+{
-+ u8 smpss = PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ;
-+ u32 reg;
-+
-+ /* Find the minimal supported MAX payload size */
-+ advk_pcie_find_smpss(bus->self, &smpss);
-+ pci_walk_bus(bus, advk_pcie_find_smpss, &smpss);
-+
-+ /* Configure RC MAX payload size */
-+ reg = advk_readl(pcie, PCIE_CORE_DEV_CTRL_STATS_REG);
-+ reg &= ~PCI_EXP_DEVCTL_PAYLOAD;
-+ reg |= smpss << PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT;
-+ advk_writel(pcie, reg, PCIE_CORE_DEV_CTRL_STATS_REG);
-+
-+ /* Configure device MAX payload size */
-+ advk_pcie_bus_configure_mps(bus->self, &smpss);
-+ pci_walk_bus(bus, advk_pcie_bus_configure_mps, &smpss);
-+}
-+
- static int advk_pcie_probe(struct platform_device *pdev)
- {
- struct device *dev = &pdev->dev;
-@@ -908,6 +963,9 @@ static int advk_pcie_probe(struct platfo
- list_for_each_entry(child, &bus->children, node)
- pcie_bus_configure_settings(child);
-
-+ /* Configure the MAX pay load size */
-+ advk_pcie_configure_mps(bus, pcie);
-+
- pci_bus_add_devices(bus);
- return 0;
- }
+++ /dev/null
-From f70b629e488cc3f2a325ac35476f4f7ae502c5d0 Mon Sep 17 00:00:00 2001
-From: Tomasz Maciej Nowak <tmn505@gmail.com>
-Date: Thu, 14 Jun 2018 14:24:40 +0200
-Subject: [PATCH 1/2] PCI: aardvark: allow to specify link capability
-
-Use DT of_pci_get_max_link_speed() facility to allow specifying link
-capability. If none or unspecified value is given it falls back to gen2,
-which is default for Armada 3700 SoC.
-
-Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
----
- drivers/pci/controller/pci-aardvark.c | 11 +++++++++--
- 1 file changed, 9 insertions(+), 2 deletions(-)
-
---- a/drivers/pci/controller/pci-aardvark.c
-+++ b/drivers/pci/controller/pci-aardvark.c
-@@ -233,6 +233,8 @@ static int advk_pcie_wait_for_link(struc
-
- static void advk_pcie_setup_hw(struct advk_pcie *pcie)
- {
-+ struct device *dev = &pcie->pdev->dev;
-+ struct device_node *node = dev->of_node;
- u32 reg;
-
- /* Set to Direct mode */
-@@ -267,10 +269,15 @@ static void advk_pcie_setup_hw(struct ad
- PCIE_CORE_CTRL2_TD_ENABLE;
- advk_writel(pcie, reg, PCIE_CORE_CTRL2_REG);
-
-- /* Set GEN2 */
-+ /* Set GEN */
- reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
- reg &= ~PCIE_GEN_SEL_MSK;
-- reg |= SPEED_GEN_2;
-+ if (of_pci_get_max_link_speed(node) == 1)
-+ reg |= SPEED_GEN_1;
-+ else if (of_pci_get_max_link_speed(node) == 3)
-+ reg |= SPEED_GEN_3;
-+ else
-+ reg |= SPEED_GEN_2;
- advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
-
- /* Set lane X1 */
+++ /dev/null
-From 33f8fdcedb01680427328d710594facef7a0092c Mon Sep 17 00:00:00 2001
-From: Tomasz Maciej Nowak <tmn505@gmail.com>
-Date: Thu, 14 Jun 2018 14:40:26 +0200
-Subject: [PATCH 2/2] arm64: dts: armada-3720-espressobin: set max link to gen1
-
-Since the beginning there's been an issue with initializing the Atheros
-based MiniPCIe wireless cards. Here's an example of kerenel log:
-
- OF: PCI: host bridge /soc/pcie@d0070000 ranges:
- OF: PCI: MEM 0xe8000000..0xe8ffffff -> 0xe8000000
- OF: PCI: IO 0xe9000000..0xe900ffff -> 0xe9000000
- advk-pcie d0070000.pcie: link up
- advk-pcie d0070000.pcie: PCI host bridge to bus 0000:00
- pci_bus 0000:00: root bus resource [bus 00-ff]
- pci_bus 0000:00: root bus resource [mem0xe8000000-0xe8ffffff]
- pci_bus 0000:00: root bus resource [io 0x0000-0xffff](bus address [0xe9000000-0xe900ffff])
- pci 0000:00:00.0: BAR 0: assigned [mem0xe8000000-0xe801ffff 64bit]
- pci 0000:00:00.0: BAR 6: assigned [mem0xe8020000-0xe802ffff pref]
- [...]
- advk-pcie d0070000.pcie: Posted PIO Response Status: CA,0xe00 @ 0x3c
- advk-pcie d0070000.pcie: Posted PIO Response Status: CA,0xe00 @ 0x44
- advk-pcie d0070000.pcie: Posted PIO Response Status: CA,0xe00 @ 0x4
- ath9k 0000:00:00.0: enabling device (0000 -> 0002)
- advk-pcie d0070000.pcie: Posted PIO Response Status: CA,0xe00 @ 0x3c
- advk-pcie d0070000.pcie: Posted PIO Response Status: CA,0xe00 @ 0xc
- advk-pcie d0070000.pcie: Posted PIO Response Status: CA,0xe00 @ 0x4
- advk-pcie d0070000.pcie: Posted PIO Response Status: CA,0xe00 @ 0x40
- ath9k 0000:00:00.0: request_irq failed
- advk-pcie d0070000.pcie: Posted PIO Response Status: CA,0xe00 @ 0x4
- ath9k: probe of 0000:00:00.0 failed with error -22
-
-The same happens for ath5k cards, while ath10k card didn't appear at
-all (not detected):
-
- OF: PCI: host bridge /soc/pcie@d0070000 ranges:
- OF: PCI: MEM 0xe8000000..0xe8ffffff -> 0xe8000000
- OF: PCI: IO 0xe9000000..0xe900ffff -> 0xe9000000
- advk-pcie d0070000.pcie: link never came up
- advk-pcie d0070000.pcie: PCI host bridge to bus 0000:00
- pci_bus 0000:00: root bus resource [bus 00-ff]
- pci_bus 0000:00: root bus resource [mem0xe8000000-0xe8ffffff]
- pci_bus 0000:00: root bus resource [io 0x0000-0xffff](bus address [0xe9000000-0xe900ffff])
- advk-pcie d0070000.pcie: config read/write timed out
-
-Following the issue on esppressobin.net forum [1] the workaround seems
-to be limiting the speed of PCIe bridge to 1st generation. This fixed
-the initialisation of all tested Atheros wireless cards.
-The patch in the forum thread swaped registers which would limit speed
-for all Armada 3700 based boards. The approach in this patch, in
-conjunction with "PCI: aardvark: allow to specify link capability" patch
-is less invasive, it only touches the affected board.
-
-For the record, the iwlwifi and mt76 cards were not affected by this
-issue.
-
-1. http://espressobin.net/forums/topic/which-pcie-wlan-cards-are-supported
-
-Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
----
- arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-@@ -46,6 +46,8 @@
- /* J9 */
- &pcie0 {
- status = "okay";
-+
-+ max-link-speed = <1>;
- };
-
- /* J6 */
+++ /dev/null
-From da58a931f248f423f917c3a0b3c94303aa30a738 Mon Sep 17 00:00:00 2001
-From: Maxime Chevallier <maxime.chevallier@bootlin.com>
-Date: Tue, 25 Sep 2018 15:59:39 +0200
-Subject: [PATCH] net: mvneta: Add support for 2500Mbps SGMII
-
-The mvneta controller can handle speeds up to 2500Mbps on the SGMII
-interface. This relies on serdes configuration, the lane must be
-configured at 3.125Gbps and we can't use in-band autoneg at that speed.
-
-The main issue when supporting that speed on this particular controller
-is that the link partner can send ethernet frames with a shortened
-preamble, which if not explicitly enabled in the controller will cause
-unexpected behaviours.
-
-This was tested on Armada 385, with the comphy configuration done in
-bootloader.
-
-Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/marvell/mvneta.c | 27 +++++++++++++++++++++++----
- 1 file changed, 23 insertions(+), 4 deletions(-)
-
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -221,6 +221,8 @@
- #define MVNETA_GMAC_AN_FLOW_CTRL_EN BIT(11)
- #define MVNETA_GMAC_CONFIG_FULL_DUPLEX BIT(12)
- #define MVNETA_GMAC_AN_DUPLEX_EN BIT(13)
-+#define MVNETA_GMAC_CTRL_4 0x2c90
-+#define MVNETA_GMAC4_SHORT_PREAMBLE_ENABLE BIT(1)
- #define MVNETA_MIB_COUNTERS_BASE 0x3000
- #define MVNETA_MIB_LATE_COLLISION 0x7c
- #define MVNETA_DA_FILT_SPEC_MCAST 0x3400
-@@ -3358,6 +3360,7 @@ static void mvneta_validate(struct net_d
- if (state->interface != PHY_INTERFACE_MODE_NA &&
- state->interface != PHY_INTERFACE_MODE_QSGMII &&
- state->interface != PHY_INTERFACE_MODE_SGMII &&
-+ state->interface != PHY_INTERFACE_MODE_2500BASEX &&
- !phy_interface_mode_is_8023z(state->interface) &&
- !phy_interface_mode_is_rgmii(state->interface)) {
- bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
-@@ -3370,9 +3373,15 @@ static void mvneta_validate(struct net_d
-
- /* Asymmetric pause is unsupported */
- phylink_set(mask, Pause);
-- /* Half-duplex at speeds higher than 100Mbit is unsupported */
-- phylink_set(mask, 1000baseT_Full);
-- phylink_set(mask, 1000baseX_Full);
-+
-+ /* We cannot use 1Gbps when using the 2.5G interface. */
-+ if (state->interface == PHY_INTERFACE_MODE_2500BASEX) {
-+ phylink_set(mask, 2500baseT_Full);
-+ phylink_set(mask, 2500baseX_Full);
-+ } else {
-+ phylink_set(mask, 1000baseT_Full);
-+ phylink_set(mask, 1000baseX_Full);
-+ }
-
- if (!phy_interface_mode_is_8023z(state->interface)) {
- /* 10M and 100M are only supported in non-802.3z mode */
-@@ -3433,12 +3442,14 @@ static void mvneta_mac_config(struct net
- struct mvneta_port *pp = netdev_priv(ndev);
- u32 new_ctrl0, gmac_ctrl0 = mvreg_read(pp, MVNETA_GMAC_CTRL_0);
- u32 new_ctrl2, gmac_ctrl2 = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
-+ u32 new_ctrl4, gmac_ctrl4 = mvreg_read(pp, MVNETA_GMAC_CTRL_4);
- u32 new_clk, gmac_clk = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER);
- u32 new_an, gmac_an = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
-
- new_ctrl0 = gmac_ctrl0 & ~MVNETA_GMAC0_PORT_1000BASE_X;
- new_ctrl2 = gmac_ctrl2 & ~(MVNETA_GMAC2_INBAND_AN_ENABLE |
- MVNETA_GMAC2_PORT_RESET);
-+ new_ctrl4 = gmac_ctrl4 & ~(MVNETA_GMAC4_SHORT_PREAMBLE_ENABLE);
- new_clk = gmac_clk & ~MVNETA_GMAC_1MS_CLOCK_ENABLE;
- new_an = gmac_an & ~(MVNETA_GMAC_INBAND_AN_ENABLE |
- MVNETA_GMAC_INBAND_RESTART_AN |
-@@ -3471,7 +3482,7 @@ static void mvneta_mac_config(struct net
- if (state->duplex)
- new_an |= MVNETA_GMAC_CONFIG_FULL_DUPLEX;
-
-- if (state->speed == SPEED_1000)
-+ if (state->speed == SPEED_1000 || state->speed == SPEED_2500)
- new_an |= MVNETA_GMAC_CONFIG_GMII_SPEED;
- else if (state->speed == SPEED_100)
- new_an |= MVNETA_GMAC_CONFIG_MII_SPEED;
-@@ -3510,10 +3521,18 @@ static void mvneta_mac_config(struct net
- MVNETA_GMAC_FORCE_LINK_DOWN);
- }
-
-+ /* When at 2.5G, the link partner can send frames with shortened
-+ * preambles.
-+ */
-+ if (state->speed == SPEED_2500)
-+ new_ctrl4 |= MVNETA_GMAC4_SHORT_PREAMBLE_ENABLE;
-+
- if (new_ctrl0 != gmac_ctrl0)
- mvreg_write(pp, MVNETA_GMAC_CTRL_0, new_ctrl0);
- if (new_ctrl2 != gmac_ctrl2)
- mvreg_write(pp, MVNETA_GMAC_CTRL_2, new_ctrl2);
-+ if (new_ctrl4 != gmac_ctrl4)
-+ mvreg_write(pp, MVNETA_GMAC_CTRL_4, new_ctrl4);
- if (new_clk != gmac_clk)
- mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, new_clk);
- if (new_an != gmac_an)
+++ /dev/null
-From fbd1d5245372e48b494120a30fe0b34b304576c4 Mon Sep 17 00:00:00 2001
-From: Alexandre Belloni <alexandre.belloni@bootlin.com>
-Date: Fri, 9 Nov 2018 17:37:20 +0100
-Subject: [PATCH] net: mvneta: correct typo
-
-The reserved variable should be named reserved1.
-
-Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/marvell/mvneta.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -495,7 +495,7 @@ struct mvneta_port {
- #if defined(__LITTLE_ENDIAN)
- struct mvneta_tx_desc {
- u32 command; /* Options used by HW for packet transmitting.*/
-- u16 reserverd1; /* csum_l4 (for future use) */
-+ u16 reserved1; /* csum_l4 (for future use) */
- u16 data_size; /* Data size of transmitted packet in bytes */
- u32 buf_phys_addr; /* Physical addr of transmitted buffer */
- u32 reserved2; /* hw_cmd - (for future use, PMT) */
-@@ -520,7 +520,7 @@ struct mvneta_rx_desc {
- #else
- struct mvneta_tx_desc {
- u16 data_size; /* Data size of transmitted packet in bytes */
-- u16 reserverd1; /* csum_l4 (for future use) */
-+ u16 reserved1; /* csum_l4 (for future use) */
- u32 command; /* Options used by HW for packet transmitting.*/
- u32 reserved2; /* hw_cmd - (for future use, PMT) */
- u32 buf_phys_addr; /* Physical addr of transmitted buffer */
+++ /dev/null
-From 83e65df6dfece9eb588735459428f221eb930c0c Mon Sep 17 00:00:00 2001
-From: Maxime Chevallier <maxime.chevallier@bootlin.com>
-Date: Fri, 9 Nov 2018 09:17:33 +0100
-Subject: [PATCH] net: mvneta: Don't advertise 2.5G modes
-
-Using 2.5G speed relies on the SerDes lanes being configured
-accordingly. The lanes have to be reconfigured to switch between
-1G and 2.5G, and for now only the bootloader does this configuration.
-
-In the case we add a Comphy driver to handle switching the lanes
-dynamically, it's better for now to stick with supporting only 1G and
-add advertisement for 2.5G once we really are capable of handling both
-speeds without problem.
-
-Since the interface mode is initialy taken from the DT, we want to make
-sure that adding comphy support won't break boards that don't update
-their dtb.
-
-Fixes: da58a931f248 ("net: mvneta: Add support for 2500Mbps SGMII")
-Reported-by: Andrew Lunn <andrew@lunn.ch>
-Reported-by: Russell King <linux@armlinux.org.uk>
-Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/marvell/mvneta.c | 12 +++---------
- 1 file changed, 3 insertions(+), 9 deletions(-)
-
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -3360,7 +3360,6 @@ static void mvneta_validate(struct net_d
- if (state->interface != PHY_INTERFACE_MODE_NA &&
- state->interface != PHY_INTERFACE_MODE_QSGMII &&
- state->interface != PHY_INTERFACE_MODE_SGMII &&
-- state->interface != PHY_INTERFACE_MODE_2500BASEX &&
- !phy_interface_mode_is_8023z(state->interface) &&
- !phy_interface_mode_is_rgmii(state->interface)) {
- bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS);
-@@ -3374,14 +3373,9 @@ static void mvneta_validate(struct net_d
- /* Asymmetric pause is unsupported */
- phylink_set(mask, Pause);
-
-- /* We cannot use 1Gbps when using the 2.5G interface. */
-- if (state->interface == PHY_INTERFACE_MODE_2500BASEX) {
-- phylink_set(mask, 2500baseT_Full);
-- phylink_set(mask, 2500baseX_Full);
-- } else {
-- phylink_set(mask, 1000baseT_Full);
-- phylink_set(mask, 1000baseX_Full);
-- }
-+ /* Half-duplex at speeds higher than 100Mbit is unsupported */
-+ phylink_set(mask, 1000baseT_Full);
-+ phylink_set(mask, 1000baseX_Full);
-
- if (!phy_interface_mode_is_8023z(state->interface)) {
- /* 10M and 100M are only supported in non-802.3z mode */
+++ /dev/null
-From e4a3e9ff5ba9f6b67595ec2768ed4be2054c2aa5 Mon Sep 17 00:00:00 2001
-From: YueHaibing <yuehaibing@huawei.com>
-Date: Thu, 22 Nov 2018 14:42:00 +0800
-Subject: [PATCH] net: mvneta: remove redundant check for
- eee->tx_lpi_timer < 0
-
-fixes the smatch warning:
-
-drivers/net/ethernet/marvell/mvneta.c:4252 mvneta_ethtool_set_eee() warn:
- unsigned 'eee->tx_lpi_timer' is never less than zero.
-
-Signed-off-by: YueHaibing <yuehaibing@huawei.com>
-Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/marvell/mvneta.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -4267,8 +4267,7 @@ static int mvneta_ethtool_set_eee(struct
-
- /* The Armada 37x documents do not give limits for this other than
- * it being an 8-bit register. */
-- if (eee->tx_lpi_enabled &&
-- (eee->tx_lpi_timer < 0 || eee->tx_lpi_timer > 255))
-+ if (eee->tx_lpi_enabled && eee->tx_lpi_timer > 255)
- return -EINVAL;
-
- lpi_ctl0 = mvreg_read(pp, MVNETA_LPI_CTRL_0);
+++ /dev/null
-From a10c1c8191e04c21769656c2ca8e1c69a6218954 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Thu, 7 Feb 2019 16:19:26 +0000
-Subject: [PATCH] net: marvell: neta: add comphy support
-
-Add support for the common phy binding, so that we can reconfigure the
-comphy according to the desired ethernet speed. This will allow us to
-support 1000base-X and 2500base-X SFPs dynamically on SolidRun Clearfog.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/marvell/mvneta.c | 45 +++++++++++++++++++++++++++++++----
- 1 file changed, 41 insertions(+), 4 deletions(-)
-
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -27,6 +27,7 @@
- #include <linux/of_irq.h>
- #include <linux/of_mdio.h>
- #include <linux/of_net.h>
-+#include <linux/phy/phy.h>
- #include <linux/phy.h>
- #include <linux/phylink.h>
- #include <linux/platform_device.h>
-@@ -438,6 +439,7 @@ struct mvneta_port {
- struct device_node *dn;
- unsigned int tx_csum_limit;
- struct phylink *phylink;
-+ struct phy *comphy;
-
- struct mvneta_bm *bm_priv;
- struct mvneta_bm_pool *pool_long;
-@@ -3167,6 +3169,8 @@ static void mvneta_start_dev(struct mvne
- {
- int cpu;
-
-+ WARN_ON(phy_power_on(pp->comphy));
-+
- mvneta_max_rx_size_set(pp, pp->pkt_size);
- mvneta_txq_max_tx_size_set(pp, pp->pkt_size);
-
-@@ -3229,6 +3233,8 @@ static void mvneta_stop_dev(struct mvnet
-
- mvneta_tx_reset(pp);
- mvneta_rx_reset(pp);
-+
-+ WARN_ON(phy_power_off(pp->comphy));
- }
-
- static void mvneta_percpu_enable(void *arg)
-@@ -3354,6 +3360,7 @@ static int mvneta_set_mac_addr(struct ne
- static void mvneta_validate(struct net_device *ndev, unsigned long *supported,
- struct phylink_link_state *state)
- {
-+ struct mvneta_port *pp = netdev_priv(ndev);
- __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
-
- /* We only support QSGMII, SGMII, 802.3z and RGMII modes */
-@@ -3374,8 +3381,13 @@ static void mvneta_validate(struct net_d
- phylink_set(mask, Pause);
-
- /* Half-duplex at speeds higher than 100Mbit is unsupported */
-- phylink_set(mask, 1000baseT_Full);
-- phylink_set(mask, 1000baseX_Full);
-+ if (pp->comphy || state->interface != PHY_INTERFACE_MODE_2500BASEX) {
-+ phylink_set(mask, 1000baseT_Full);
-+ phylink_set(mask, 1000baseX_Full);
-+ }
-+ if (pp->comphy || state->interface == PHY_INTERFACE_MODE_2500BASEX) {
-+ phylink_set(mask, 2500baseX_Full);
-+ }
-
- if (!phy_interface_mode_is_8023z(state->interface)) {
- /* 10M and 100M are only supported in non-802.3z mode */
-@@ -3389,6 +3401,11 @@ static void mvneta_validate(struct net_d
- __ETHTOOL_LINK_MODE_MASK_NBITS);
- bitmap_and(state->advertising, state->advertising, mask,
- __ETHTOOL_LINK_MODE_MASK_NBITS);
-+
-+ /* We can only operate at 2500BaseX or 1000BaseX. If requested
-+ * to advertise both, only report advertising at 2500BaseX.
-+ */
-+ phylink_helper_basex_speed(state);
- }
-
- static int mvneta_mac_link_state(struct net_device *ndev,
-@@ -3400,7 +3417,9 @@ static int mvneta_mac_link_state(struct
- gmac_stat = mvreg_read(pp, MVNETA_GMAC_STATUS);
-
- if (gmac_stat & MVNETA_GMAC_SPEED_1000)
-- state->speed = SPEED_1000;
-+ state->speed =
-+ state->interface == PHY_INTERFACE_MODE_2500BASEX ?
-+ SPEED_2500 : SPEED_1000;
- else if (gmac_stat & MVNETA_GMAC_SPEED_100)
- state->speed = SPEED_100;
- else
-@@ -3515,12 +3534,20 @@ static void mvneta_mac_config(struct net
- MVNETA_GMAC_FORCE_LINK_DOWN);
- }
-
-+
- /* When at 2.5G, the link partner can send frames with shortened
- * preambles.
- */
- if (state->speed == SPEED_2500)
- new_ctrl4 |= MVNETA_GMAC4_SHORT_PREAMBLE_ENABLE;
-
-+ if (pp->comphy &&
-+ (state->interface == PHY_INTERFACE_MODE_SGMII ||
-+ state->interface == PHY_INTERFACE_MODE_1000BASEX ||
-+ state->interface == PHY_INTERFACE_MODE_2500BASEX))
-+ WARN_ON(phy_set_mode_ext(pp->comphy, PHY_MODE_ETHERNET,
-+ state->interface));
-+
- if (new_ctrl0 != gmac_ctrl0)
- mvreg_write(pp, MVNETA_GMAC_CTRL_0, new_ctrl0);
- if (new_ctrl2 != gmac_ctrl2)
-@@ -4433,7 +4460,7 @@ static int mvneta_port_power_up(struct m
- if (phy_mode == PHY_INTERFACE_MODE_QSGMII)
- mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_QSGMII_SERDES_PROTO);
- else if (phy_mode == PHY_INTERFACE_MODE_SGMII ||
-- phy_mode == PHY_INTERFACE_MODE_1000BASEX)
-+ phy_interface_mode_is_8023z(phy_mode))
- mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO);
- else if (!phy_interface_mode_is_rgmii(phy_mode))
- return -EINVAL;
-@@ -4450,6 +4477,7 @@ static int mvneta_probe(struct platform_
- struct mvneta_port *pp;
- struct net_device *dev;
- struct phylink *phylink;
-+ struct phy *comphy;
- const char *dt_mac_addr;
- char hw_mac_addr[ETH_ALEN];
- const char *mac_from;
-@@ -4475,6 +4503,14 @@ static int mvneta_probe(struct platform_
- goto err_free_irq;
- }
-
-+ comphy = devm_of_phy_get(&pdev->dev, dn, NULL);
-+ if (comphy == ERR_PTR(-EPROBE_DEFER)) {
-+ err = -EPROBE_DEFER;
-+ goto err_free_irq;
-+ } else if (IS_ERR(comphy)) {
-+ comphy = NULL;
-+ }
-+
- phylink = phylink_create(dev, pdev->dev.fwnode, phy_mode,
- &mvneta_phylink_ops);
- if (IS_ERR(phylink)) {
-@@ -4491,6 +4527,7 @@ static int mvneta_probe(struct platform_
- pp = netdev_priv(dev);
- spin_lock_init(&pp->lock);
- pp->phylink = phylink;
-+ pp->comphy = comphy;
- pp->phy_interface = phy_mode;
- pp->dn = dn;
-
+++ /dev/null
-From 031b922bfd60c771588911112f8632783de08e5c Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <marek.behun@nic.cz>
-Date: Mon, 25 Feb 2019 17:43:03 +0100
-Subject: [PATCH] net: marvell: neta: disable comphy when setting mode
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The comphy driver for Armada 3700 by Miquèl Raynal (which is currently
-in linux-next) does not actually set comphy mode when phy_set_mode_ext
-is called. The mode is set at next call of phy_power_on.
-
-Update the driver to semantics similar to mvpp2: helper
-mvneta_comphy_init sets comphy mode and powers it on.
-When mode is to be changed in mvneta_mac_config, first power the comphy
-off, then call mvneta_comphy_init (which sets the mode to new one).
-
-Only do this when new mode is different from old mode.
-
-This should also work for Armada 38x, since in that comphy driver
-methods power_on and power_off are unimplemented.
-
-Signed-off-by: Marek Behún <marek.behun@nic.cz>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/marvell/mvneta.c | 28 +++++++++++++++++++++++-----
- 1 file changed, 23 insertions(+), 5 deletions(-)
-
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -3165,11 +3165,26 @@ static int mvneta_setup_txqs(struct mvne
- return 0;
- }
-
-+static int mvneta_comphy_init(struct mvneta_port *pp)
-+{
-+ int ret;
-+
-+ if (!pp->comphy)
-+ return 0;
-+
-+ ret = phy_set_mode_ext(pp->comphy, PHY_MODE_ETHERNET,
-+ pp->phy_interface);
-+ if (ret)
-+ return ret;
-+
-+ return phy_power_on(pp->comphy);
-+}
-+
- static void mvneta_start_dev(struct mvneta_port *pp)
- {
- int cpu;
-
-- WARN_ON(phy_power_on(pp->comphy));
-+ WARN_ON(mvneta_comphy_init(pp));
-
- mvneta_max_rx_size_set(pp, pp->pkt_size);
- mvneta_txq_max_tx_size_set(pp, pp->pkt_size);
-@@ -3541,12 +3556,15 @@ static void mvneta_mac_config(struct net
- if (state->speed == SPEED_2500)
- new_ctrl4 |= MVNETA_GMAC4_SHORT_PREAMBLE_ENABLE;
-
-- if (pp->comphy &&
-+ if (pp->comphy && pp->phy_interface != state->interface &&
- (state->interface == PHY_INTERFACE_MODE_SGMII ||
- state->interface == PHY_INTERFACE_MODE_1000BASEX ||
-- state->interface == PHY_INTERFACE_MODE_2500BASEX))
-- WARN_ON(phy_set_mode_ext(pp->comphy, PHY_MODE_ETHERNET,
-- state->interface));
-+ state->interface == PHY_INTERFACE_MODE_2500BASEX)) {
-+ pp->phy_interface = state->interface;
-+
-+ WARN_ON(phy_power_off(pp->comphy));
-+ WARN_ON(mvneta_comphy_init(pp));
-+ }
-
- if (new_ctrl0 != gmac_ctrl0)
- mvreg_write(pp, MVNETA_GMAC_CTRL_0, new_ctrl0);
+++ /dev/null
-From eda3d1b0228484fb52b7244a68fd4cc8a985ed10 Mon Sep 17 00:00:00 2001
-From: Maxime Chevallier <maxime.chevallier@bootlin.com>
-Date: Wed, 27 Mar 2019 17:31:06 +0100
-Subject: [PATCH] net: mvneta: Add 2500BaseT support
-
-Some PHYs will use the 2500BaseX PHY_INTERFACE_MODE when being linked
-with a partner using 2.5GBaseT.
-
-Since we can't autonegotiate this speed between the MAC and the PHY, we
-need to have the proper comphy support enabled, to make sure we can
-safely advertise 2.5G and 1G in BaseT and be able to switch between both
-corresponding PHY interface modes. This is now possible since comphy
-support was added to this driver.
-
-This commit adds the 2500BaseT mode to the list of supported modes when
-using 2500BaseX, and was tested on a setup with an Armada385 and a
-88E2010 PHY, both with and without the comphy node in the DT.
-
-Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/ethernet/marvell/mvneta.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -3401,6 +3401,7 @@ static void mvneta_validate(struct net_d
- phylink_set(mask, 1000baseX_Full);
- }
- if (pp->comphy || state->interface == PHY_INTERFACE_MODE_2500BASEX) {
-+ phylink_set(mask, 2500baseT_Full);
- phylink_set(mask, 2500baseX_Full);
- }
-
+++ /dev/null
-From c2a90025ad09d830c8d8ae69f485eac6aaaa2472 Mon Sep 17 00:00:00 2001
-From: Quentin Schulz <quentin.schulz@bootlin.com>
-Date: Thu, 4 Oct 2018 14:22:03 +0200
-Subject: [PATCH] phy: add QSGMII and PCIE modes
-
-Prepare for upcoming phys that'll handle QSGMII or PCIe.
-
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- include/linux/phy/phy.h | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/include/linux/phy/phy.h
-+++ b/include/linux/phy/phy.h
-@@ -37,9 +37,11 @@ enum phy_mode {
- PHY_MODE_USB_OTG,
- PHY_MODE_SGMII,
- PHY_MODE_2500SGMII,
-+ PHY_MODE_QSGMII,
- PHY_MODE_10GKR,
- PHY_MODE_UFS_HS_A,
- PHY_MODE_UFS_HS_B,
-+ PHY_MODE_PCIE,
- };
-
- /**
+++ /dev/null
-From 2af8caeee47846a84bc96abc3a72f7c991153040 Mon Sep 17 00:00:00 2001
-From: Grygorii Strashko <grygorii.strashko@ti.com>
-Date: Mon, 19 Nov 2018 19:24:21 -0600
-Subject: [PATCH] phy: core: add PHY_MODE_ETHERNET
-
-Add new PHY's mode to be used by Ethernet PHY interface drivers or
-multipurpose PHYs like serdes. It will be reused in further changes.
-
-Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
-Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
----
- include/linux/phy/phy.h | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/include/linux/phy/phy.h
-+++ b/include/linux/phy/phy.h
-@@ -42,6 +42,7 @@ enum phy_mode {
- PHY_MODE_UFS_HS_A,
- PHY_MODE_UFS_HS_B,
- PHY_MODE_PCIE,
-+ PHY_MODE_ETHERNET,
- };
-
- /**
+++ /dev/null
-From e1706720408e72fb883f6b151c2b3b23d8e7e5b2 Mon Sep 17 00:00:00 2001
-From: John Hubbard <jhubbard@nvidia.com>
-Date: Sat, 12 Jan 2019 17:29:09 -0800
-Subject: [PATCH] phy: fix build breakage: add PHY_MODE_SATA
-
-Commit 49e54187ae0b ("ata: libahci_platform: comply to PHY framework") uses
-the PHY_MODE_SATA, but that enum had not yet been added. This caused a
-build failure for me, with today's linux.git.
-
-Also, there is a potentially conflicting (mis-named) PHY_MODE_SATA, hiding
-in the Marvell Berlin SATA PHY driver.
-
-Fix the build by:
-
- 1) Renaming Marvell's defined value to a more scoped name,
- in order to avoid any potential conflicts: PHY_BERLIN_MODE_SATA.
-
- 2) Adding the missing enum, which was going to be added anyway as part
- of [1].
-
-[1] https://lkml.kernel.org/r/20190108163124.6409-3-miquel.raynal@bootlin.com
-
-Fixes: 49e54187ae0b ("ata: libahci_platform: comply to PHY framework")
-
-Signed-off-by: John Hubbard <jhubbard@nvidia.com>
-Acked-by: Jens Axboe <axboe@kernel.dk>
-Acked-by: Olof Johansson <olof@lixom.net>
-Cc: Grzegorz Jaszczyk <jaz@semihalf.com>
-Cc: Miquel Raynal <miquel.raynal@bootlin.com>
-Cc: Hans de Goede <hdegoede@redhat.com>
-Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
----
- include/linux/phy/phy.h | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/include/linux/phy/phy.h
-+++ b/include/linux/phy/phy.h
-@@ -43,6 +43,7 @@ enum phy_mode {
- PHY_MODE_UFS_HS_B,
- PHY_MODE_PCIE,
- PHY_MODE_ETHERNET,
-+ PHY_MODE_SATA
- };
-
- /**
+++ /dev/null
-From 79a5a18aa9d1062205cdcfa183d4cd5241d1b8da Mon Sep 17 00:00:00 2001
-From: Grygorii Strashko <grygorii.strashko@ti.com>
-Date: Mon, 19 Nov 2018 19:24:20 -0600
-Subject: [PATCH] phy: core: rework phy_set_mode to accept phy mode and submode
-
-Currently the attempt to add support for Ethernet interface mode PHY
-(MII/GMII/RGMII) will lead to the necessity of extending enum phy_mode and
-duplicate there values from phy_interface_t enum (or introduce more PHY
-callbacks) [1]. Both approaches are ineffective and would lead to fast
-bloating of enum phy_mode or struct phy_ops in the process of adding more
-PHYs for different subsystems which will make them unmaintainable.
-
-As discussed in [1] the solution could be to introduce dual level PHYs mode
-configuration - PHY mode and PHY submode. The PHY mode will define generic
-PHY type (subsystem - PCIE/ETHERNET/USB_) while the PHY submode - subsystem
-specific interface mode. The last is usually already defined in
-corresponding subsystem headers (phy_interface_t for Ethernet, enum
-usb_device_speed for USB).
-
-This patch is cumulative change which refactors PHY framework code to
-support dual level PHYs mode configuration - PHY mode and PHY submode. It
-extends .set_mode() callback to support additional parameter "int submode"
-and converts all corresponding PHY drivers to support new .set_mode()
-callback declaration.
-The new extended PHY API
- int phy_set_mode_ext(struct phy *phy, enum phy_mode mode, int submode)
-is introduced to support dual level PHYs mode configuration and existing
-phy_set_mode() API is converted to macros, so PHY framework consumers do
-not need to be changed (~21 matches).
-
-[1] http://lkml.kernel.org/r/d63588f6-9ab0-848a-5ad4-8073143bd95d@ti.com
-Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
-Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
----
- drivers/phy/allwinner/phy-sun4i-usb.c | 3 ++-
- drivers/phy/amlogic/phy-meson-gxl-usb2.c | 5 +++--
- drivers/phy/amlogic/phy-meson-gxl-usb3.c | 5 +++--
- drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 3 ++-
- drivers/phy/mediatek/phy-mtk-tphy.c | 2 +-
- drivers/phy/mediatek/phy-mtk-xsphy.c | 2 +-
- drivers/phy/mscc/phy-ocelot-serdes.c | 2 +-
- drivers/phy/phy-core.c | 6 +++---
- drivers/phy/qualcomm/phy-qcom-qmp.c | 3 ++-
- drivers/phy/qualcomm/phy-qcom-qusb2.c | 3 ++-
- drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c | 3 ++-
- drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c | 3 ++-
- drivers/phy/qualcomm/phy-qcom-usb-hs.c | 3 ++-
- drivers/phy/ti/phy-da8xx-usb.c | 3 ++-
- drivers/phy/ti/phy-tusb1210.c | 2 +-
- include/linux/phy/phy.h | 13 ++++++++++---
- 16 files changed, 39 insertions(+), 22 deletions(-)
-
---- a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
-+++ b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
-@@ -512,7 +512,8 @@ static int mvebu_comphy_power_on(struct
- return ret;
- }
-
--static int mvebu_comphy_set_mode(struct phy *phy, enum phy_mode mode)
-+static int mvebu_comphy_set_mode(struct phy *phy,
-+ enum phy_mode mode, int submode)
- {
- struct mvebu_comphy_lane *lane = phy_get_drvdata(phy);
-
---- a/drivers/phy/phy-core.c
-+++ b/drivers/phy/phy-core.c
-@@ -360,7 +360,7 @@ int phy_power_off(struct phy *phy)
- }
- EXPORT_SYMBOL_GPL(phy_power_off);
-
--int phy_set_mode(struct phy *phy, enum phy_mode mode)
-+int phy_set_mode_ext(struct phy *phy, enum phy_mode mode, int submode)
- {
- int ret;
-
-@@ -368,14 +368,14 @@ int phy_set_mode(struct phy *phy, enum p
- return 0;
-
- mutex_lock(&phy->mutex);
-- ret = phy->ops->set_mode(phy, mode);
-+ ret = phy->ops->set_mode(phy, mode, submode);
- if (!ret)
- phy->attrs.mode = mode;
- mutex_unlock(&phy->mutex);
-
- return ret;
- }
--EXPORT_SYMBOL_GPL(phy_set_mode);
-+EXPORT_SYMBOL_GPL(phy_set_mode_ext);
-
- int phy_reset(struct phy *phy)
- {
---- a/include/linux/phy/phy.h
-+++ b/include/linux/phy/phy.h
-@@ -62,7 +62,7 @@ struct phy_ops {
- int (*exit)(struct phy *phy);
- int (*power_on)(struct phy *phy);
- int (*power_off)(struct phy *phy);
-- int (*set_mode)(struct phy *phy, enum phy_mode mode);
-+ int (*set_mode)(struct phy *phy, enum phy_mode mode, int submode);
- int (*reset)(struct phy *phy);
- int (*calibrate)(struct phy *phy);
- struct module *owner;
-@@ -166,7 +166,10 @@ int phy_init(struct phy *phy);
- int phy_exit(struct phy *phy);
- int phy_power_on(struct phy *phy);
- int phy_power_off(struct phy *phy);
--int phy_set_mode(struct phy *phy, enum phy_mode mode);
-+int phy_set_mode_ext(struct phy *phy, enum phy_mode mode, int submode);
-+#define phy_set_mode(phy, mode) \
-+ phy_set_mode_ext(phy, mode, 0)
-+
- static inline enum phy_mode phy_get_mode(struct phy *phy)
- {
- return phy->attrs.mode;
-@@ -280,13 +283,17 @@ static inline int phy_power_off(struct p
- return -ENOSYS;
- }
-
--static inline int phy_set_mode(struct phy *phy, enum phy_mode mode)
-+static inline int phy_set_mode_ext(struct phy *phy, enum phy_mode mode,
-+ int submode)
- {
- if (!phy)
- return 0;
- return -ENOSYS;
- }
-
-+#define phy_set_mode(phy, mode) \
-+ phy_set_mode_ext(phy, mode, 0)
-+
- static inline enum phy_mode phy_get_mode(struct phy *phy)
- {
- return PHY_MODE_INVALID;
+++ /dev/null
-From 9695375a3f4a604406f2e61f2b735eca1de931ed Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Tue, 8 Jan 2019 17:31:20 +0100
-Subject: [PATCH] phy: add A3700 COMPHY support
-
-Add a driver to support COMPHY, a hardware block providing shared
-serdes PHYs on Marvell Armada 3700. This driver uses SMC calls and
-rely on having an up-to-date firmware.
-
-SATA, PCie and USB3 host mode have been tested successfully with an
-ESPRESSObin. (HS)SGMII mode cannot be tested with this platform.
-
-Evan worked on the original driver structure and Grzegorz on the SMC
-calls rework. The structure of this driver has been copied from
-Antoine Tenart work on CP110 COMPHY driver.
-
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Co-developed-by: Evan Wang <xswang@marvell.com>
-Signed-off-by: Evan Wang <xswang@marvell.com>
-Co-developed-by: Grzegorz Jaszczyk <jaz@semihalf.com>
-Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
-Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
----
- drivers/phy/marvell/Kconfig | 12 +
- drivers/phy/marvell/Makefile | 1 +
- drivers/phy/marvell/phy-mvebu-a3700-comphy.c | 318 +++++++++++++++++++++++++++
- 3 files changed, 331 insertions(+)
- create mode 100644 drivers/phy/marvell/phy-mvebu-a3700-comphy.c
-
---- a/drivers/phy/marvell/Kconfig
-+++ b/drivers/phy/marvell/Kconfig
-@@ -21,6 +21,18 @@ config PHY_BERLIN_USB
- help
- Enable this to support the USB PHY on Marvell Berlin SoCs.
-
-+config PHY_MVEBU_A3700_COMPHY
-+ tristate "Marvell A3700 comphy driver"
-+ depends on ARCH_MVEBU || COMPILE_TEST
-+ depends on OF
-+ depends on HAVE_ARM_SMCCC
-+ default y
-+ select GENERIC_PHY
-+ help
-+ This driver allows to control the comphy, a hardware block providing
-+ shared serdes PHYs on Marvell Armada 3700. Its serdes lanes can be
-+ used by various controllers: Ethernet, SATA, USB3, PCIe.
-+
- config PHY_MVEBU_CP110_COMPHY
- tristate "Marvell CP110 comphy driver"
- depends on ARCH_MVEBU || COMPILE_TEST
---- a/drivers/phy/marvell/Makefile
-+++ b/drivers/phy/marvell/Makefile
-@@ -2,6 +2,7 @@
- obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o
- obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
- obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o
-+obj-$(CONFIG_PHY_MVEBU_A3700_COMPHY) += phy-mvebu-a3700-comphy.o
- obj-$(CONFIG_PHY_MVEBU_CP110_COMPHY) += phy-mvebu-cp110-comphy.o
- obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o
- obj-$(CONFIG_PHY_PXA_28NM_HSIC) += phy-pxa-28nm-hsic.o
---- /dev/null
-+++ b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c
-@@ -0,0 +1,318 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (C) 2018 Marvell
-+ *
-+ * Authors:
-+ * Evan Wang <xswang@marvell.com>
-+ * Miquèl Raynal <miquel.raynal@bootlin.com>
-+ *
-+ * Structure inspired from phy-mvebu-cp110-comphy.c written by Antoine Tenart.
-+ * SMC call initial support done by Grzegorz Jaszczyk.
-+ */
-+
-+#include <linux/arm-smccc.h>
-+#include <linux/io.h>
-+#include <linux/iopoll.h>
-+#include <linux/mfd/syscon.h>
-+#include <linux/module.h>
-+#include <linux/phy.h>
-+#include <linux/phy/phy.h>
-+#include <linux/platform_device.h>
-+
-+#define MVEBU_A3700_COMPHY_LANES 3
-+#define MVEBU_A3700_COMPHY_PORTS 2
-+
-+/* COMPHY Fast SMC function identifiers */
-+#define COMPHY_SIP_POWER_ON 0x82000001
-+#define COMPHY_SIP_POWER_OFF 0x82000002
-+#define COMPHY_SIP_PLL_LOCK 0x82000003
-+
-+#define COMPHY_FW_MODE_SATA 0x1
-+#define COMPHY_FW_MODE_SGMII 0x2
-+#define COMPHY_FW_MODE_HS_SGMII 0x3
-+#define COMPHY_FW_MODE_USB3H 0x4
-+#define COMPHY_FW_MODE_USB3D 0x5
-+#define COMPHY_FW_MODE_PCIE 0x6
-+#define COMPHY_FW_MODE_RXAUI 0x7
-+#define COMPHY_FW_MODE_XFI 0x8
-+#define COMPHY_FW_MODE_SFI 0x9
-+#define COMPHY_FW_MODE_USB3 0xa
-+
-+#define COMPHY_FW_SPEED_1_25G 0 /* SGMII 1G */
-+#define COMPHY_FW_SPEED_2_5G 1
-+#define COMPHY_FW_SPEED_3_125G 2 /* SGMII 2.5G */
-+#define COMPHY_FW_SPEED_5G 3
-+#define COMPHY_FW_SPEED_5_15625G 4 /* XFI 5G */
-+#define COMPHY_FW_SPEED_6G 5
-+#define COMPHY_FW_SPEED_10_3125G 6 /* XFI 10G */
-+#define COMPHY_FW_SPEED_MAX 0x3F
-+
-+#define COMPHY_FW_MODE(mode) ((mode) << 12)
-+#define COMPHY_FW_NET(mode, idx, speed) (COMPHY_FW_MODE(mode) | \
-+ ((idx) << 8) | \
-+ ((speed) << 2))
-+#define COMPHY_FW_PCIE(mode, idx, speed, width) (COMPHY_FW_NET(mode, idx, speed) | \
-+ ((width) << 18))
-+
-+struct mvebu_a3700_comphy_conf {
-+ unsigned int lane;
-+ enum phy_mode mode;
-+ int submode;
-+ unsigned int port;
-+ u32 fw_mode;
-+};
-+
-+#define MVEBU_A3700_COMPHY_CONF(_lane, _mode, _smode, _port, _fw) \
-+ { \
-+ .lane = _lane, \
-+ .mode = _mode, \
-+ .submode = _smode, \
-+ .port = _port, \
-+ .fw_mode = _fw, \
-+ }
-+
-+#define MVEBU_A3700_COMPHY_CONF_GEN(_lane, _mode, _port, _fw) \
-+ MVEBU_A3700_COMPHY_CONF(_lane, _mode, PHY_INTERFACE_MODE_NA, _port, _fw)
-+
-+#define MVEBU_A3700_COMPHY_CONF_ETH(_lane, _smode, _port, _fw) \
-+ MVEBU_A3700_COMPHY_CONF(_lane, PHY_MODE_ETHERNET, _smode, _port, _fw)
-+
-+static const struct mvebu_a3700_comphy_conf mvebu_a3700_comphy_modes[] = {
-+ /* lane 0 */
-+ MVEBU_A3700_COMPHY_CONF_GEN(0, PHY_MODE_USB_HOST_SS, 0,
-+ COMPHY_FW_MODE_USB3H),
-+ MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_SGMII, 1,
-+ COMPHY_FW_MODE_SGMII),
-+ MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_2500BASEX, 1,
-+ COMPHY_FW_MODE_HS_SGMII),
-+ /* lane 1 */
-+ MVEBU_A3700_COMPHY_CONF_GEN(1, PHY_MODE_PCIE, 0,
-+ COMPHY_FW_MODE_PCIE),
-+ MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_SGMII, 0,
-+ COMPHY_FW_MODE_SGMII),
-+ MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_2500BASEX, 0,
-+ COMPHY_FW_MODE_HS_SGMII),
-+ /* lane 2 */
-+ MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_SATA, 0,
-+ COMPHY_FW_MODE_SATA),
-+ MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_USB_HOST_SS, 0,
-+ COMPHY_FW_MODE_USB3H),
-+};
-+
-+struct mvebu_a3700_comphy_lane {
-+ struct device *dev;
-+ unsigned int id;
-+ enum phy_mode mode;
-+ int submode;
-+ int port;
-+};
-+
-+static int mvebu_a3700_comphy_smc(unsigned long function, unsigned long lane,
-+ unsigned long mode)
-+{
-+ struct arm_smccc_res res;
-+
-+ arm_smccc_smc(function, lane, mode, 0, 0, 0, 0, 0, &res);
-+
-+ return res.a0;
-+}
-+
-+static int mvebu_a3700_comphy_get_fw_mode(int lane, int port,
-+ enum phy_mode mode,
-+ int submode)
-+{
-+ int i, n = ARRAY_SIZE(mvebu_a3700_comphy_modes);
-+
-+ /* Unused PHY mux value is 0x0 */
-+ if (mode == PHY_MODE_INVALID)
-+ return -EINVAL;
-+
-+ for (i = 0; i < n; i++) {
-+ if (mvebu_a3700_comphy_modes[i].lane == lane &&
-+ mvebu_a3700_comphy_modes[i].port == port &&
-+ mvebu_a3700_comphy_modes[i].mode == mode &&
-+ mvebu_a3700_comphy_modes[i].submode == submode)
-+ break;
-+ }
-+
-+ if (i == n)
-+ return -EINVAL;
-+
-+ return mvebu_a3700_comphy_modes[i].fw_mode;
-+}
-+
-+static int mvebu_a3700_comphy_set_mode(struct phy *phy, enum phy_mode mode,
-+ int submode)
-+{
-+ struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy);
-+ int fw_mode;
-+
-+ if (submode == PHY_INTERFACE_MODE_1000BASEX)
-+ submode = PHY_INTERFACE_MODE_SGMII;
-+
-+ fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id, lane->port, mode,
-+ submode);
-+ if (fw_mode < 0) {
-+ dev_err(lane->dev, "invalid COMPHY mode\n");
-+ return fw_mode;
-+ }
-+
-+ /* Just remember the mode, ->power_on() will do the real setup */
-+ lane->mode = mode;
-+ lane->submode = submode;
-+
-+ return 0;
-+}
-+
-+static int mvebu_a3700_comphy_power_on(struct phy *phy)
-+{
-+ struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy);
-+ u32 fw_param;
-+ int fw_mode;
-+
-+ fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id, lane->port,
-+ lane->mode, lane->submode);
-+ if (fw_mode < 0) {
-+ dev_err(lane->dev, "invalid COMPHY mode\n");
-+ return fw_mode;
-+ }
-+
-+ switch (lane->mode) {
-+ case PHY_MODE_USB_HOST_SS:
-+ dev_dbg(lane->dev, "set lane %d to USB3 host mode\n", lane->id);
-+ fw_param = COMPHY_FW_MODE(fw_mode);
-+ break;
-+ case PHY_MODE_SATA:
-+ dev_dbg(lane->dev, "set lane %d to SATA mode\n", lane->id);
-+ fw_param = COMPHY_FW_MODE(fw_mode);
-+ break;
-+ case PHY_MODE_ETHERNET:
-+ switch (lane->submode) {
-+ case PHY_INTERFACE_MODE_SGMII:
-+ dev_dbg(lane->dev, "set lane %d to SGMII mode\n",
-+ lane->id);
-+ fw_param = COMPHY_FW_NET(fw_mode, lane->port,
-+ COMPHY_FW_SPEED_1_25G);
-+ break;
-+ case PHY_INTERFACE_MODE_2500BASEX:
-+ dev_dbg(lane->dev, "set lane %d to HS SGMII mode\n",
-+ lane->id);
-+ fw_param = COMPHY_FW_NET(fw_mode, lane->port,
-+ COMPHY_FW_SPEED_3_125G);
-+ break;
-+ default:
-+ dev_err(lane->dev, "unsupported PHY submode (%d)\n",
-+ lane->submode);
-+ return -ENOTSUPP;
-+ }
-+ break;
-+ case PHY_MODE_PCIE:
-+ dev_dbg(lane->dev, "set lane %d to PCIe mode\n", lane->id);
-+ fw_param = COMPHY_FW_PCIE(fw_mode, lane->port,
-+ COMPHY_FW_SPEED_5G,
-+ phy->attrs.bus_width);
-+ break;
-+ default:
-+ dev_err(lane->dev, "unsupported PHY mode (%d)\n", lane->mode);
-+ return -ENOTSUPP;
-+ }
-+
-+ return mvebu_a3700_comphy_smc(COMPHY_SIP_POWER_ON, lane->id, fw_param);
-+}
-+
-+static int mvebu_a3700_comphy_power_off(struct phy *phy)
-+{
-+ struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy);
-+
-+ return mvebu_a3700_comphy_smc(COMPHY_SIP_POWER_OFF, lane->id, 0);
-+}
-+
-+static const struct phy_ops mvebu_a3700_comphy_ops = {
-+ .power_on = mvebu_a3700_comphy_power_on,
-+ .power_off = mvebu_a3700_comphy_power_off,
-+ .set_mode = mvebu_a3700_comphy_set_mode,
-+ .owner = THIS_MODULE,
-+};
-+
-+static struct phy *mvebu_a3700_comphy_xlate(struct device *dev,
-+ struct of_phandle_args *args)
-+{
-+ struct mvebu_a3700_comphy_lane *lane;
-+ struct phy *phy;
-+
-+ if (WARN_ON(args->args[0] >= MVEBU_A3700_COMPHY_PORTS))
-+ return ERR_PTR(-EINVAL);
-+
-+ phy = of_phy_simple_xlate(dev, args);
-+ if (IS_ERR(phy))
-+ return phy;
-+
-+ lane = phy_get_drvdata(phy);
-+ lane->port = args->args[0];
-+
-+ return phy;
-+}
-+
-+static int mvebu_a3700_comphy_probe(struct platform_device *pdev)
-+{
-+ struct phy_provider *provider;
-+ struct device_node *child;
-+
-+ for_each_available_child_of_node(pdev->dev.of_node, child) {
-+ struct mvebu_a3700_comphy_lane *lane;
-+ struct phy *phy;
-+ int ret;
-+ u32 lane_id;
-+
-+ ret = of_property_read_u32(child, "reg", &lane_id);
-+ if (ret < 0) {
-+ dev_err(&pdev->dev, "missing 'reg' property (%d)\n",
-+ ret);
-+ continue;
-+ }
-+
-+ if (lane_id >= MVEBU_A3700_COMPHY_LANES) {
-+ dev_err(&pdev->dev, "invalid 'reg' property\n");
-+ continue;
-+ }
-+
-+ lane = devm_kzalloc(&pdev->dev, sizeof(*lane), GFP_KERNEL);
-+ if (!lane)
-+ return -ENOMEM;
-+
-+ phy = devm_phy_create(&pdev->dev, child,
-+ &mvebu_a3700_comphy_ops);
-+ if (IS_ERR(phy))
-+ return PTR_ERR(phy);
-+
-+ lane->dev = &pdev->dev;
-+ lane->mode = PHY_MODE_INVALID;
-+ lane->submode = PHY_INTERFACE_MODE_NA;
-+ lane->id = lane_id;
-+ lane->port = -1;
-+ phy_set_drvdata(phy, lane);
-+ }
-+
-+ provider = devm_of_phy_provider_register(&pdev->dev,
-+ mvebu_a3700_comphy_xlate);
-+ return PTR_ERR_OR_ZERO(provider);
-+}
-+
-+static const struct of_device_id mvebu_a3700_comphy_of_match_table[] = {
-+ { .compatible = "marvell,comphy-a3700" },
-+ { },
-+};
-+MODULE_DEVICE_TABLE(of, mvebu_a3700_comphy_of_match_table);
-+
-+static struct platform_driver mvebu_a3700_comphy_driver = {
-+ .probe = mvebu_a3700_comphy_probe,
-+ .driver = {
-+ .name = "mvebu-a3700-comphy",
-+ .of_match_table = mvebu_a3700_comphy_of_match_table,
-+ },
-+};
-+module_platform_driver(mvebu_a3700_comphy_driver);
-+
-+MODULE_AUTHOR("Miquèl Raynal <miquel.raynal@bootlin.com>");
-+MODULE_DESCRIPTION("Common PHY driver for A3700");
-+MODULE_LICENSE("GPL v2");
+++ /dev/null
-From 2ef303f0fe44feee4a3ca8bd62fca86c105927d2 Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@bootlin.com>
-Date: Tue, 8 Jan 2019 17:31:24 +0100
-Subject: [PATCH] arm64: dts: marvell: armada-37xx: declare the COMPHY
- node
-
-Describe the A3700 COMPHY node. It has three PHYs that can be
-configured as follow:
-* PCIe or GbE
-* USB3 or GbE
-* SATA or USB3
-Each of them has its own memory area.
-
-Suggested-by: Grzegorz Jaszczyk <jaz@semihalf.com>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 29 ++++++++++++++++++++++++++++
- 1 file changed, 29 insertions(+)
-
---- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
-@@ -235,6 +235,35 @@
- reg = <0x14000 0x60>;
- };
-
-+ comphy: phy@18300 {
-+ compatible = "marvell,comphy-a3700";
-+ reg = <0x18300 0x300>,
-+ <0x1F000 0x400>,
-+ <0x5C000 0x400>,
-+ <0xe0178 0x8>;
-+ reg-names = "comphy",
-+ "lane1_pcie_gbe",
-+ "lane0_usb3_gbe",
-+ "lane2_sata_usb3";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ comphy0: phy@0 {
-+ reg = <0>;
-+ #phy-cells = <1>;
-+ };
-+
-+ comphy1: phy@1 {
-+ reg = <1>;
-+ #phy-cells = <1>;
-+ };
-+
-+ comphy2: phy@2 {
-+ reg = <2>;
-+ #phy-cells = <1>;
-+ };
-+ };
-+
- pinctrl_sb: pinctrl@18800 {
- compatible = "marvell,armada3710-sb-pinctrl",
- "syscon", "simple-mfd";
+++ /dev/null
-From 9c222a1d78a1700220e38feb270f00d2ddd3c5ab Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Wed, 6 Nov 2019 13:44:21 +0000
-Subject: [PATCH 657/660] arm64: dts: uDPU: fix comphy definitions
-
-The uDPU uses both ethernet controllers, which ties up COMPHY 0 for
-eth1 and COMPHY 1 for eth0, with no USB3 comphy. The addition of
-COMPHY support made the kernel override the setup by the boot loader
-breaking this platform. Delete the USB3 COMPHY definition at platform
-level, and add phy specifications for the ethernet channels.
-
-Fixes: bd3d25b07342 ("arm64: dts: marvell: armada-37xx: link USB hosts with their PHYs")
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
-@@ -143,6 +143,7 @@
- status = "okay";
- phy-mode = "sgmii";
- managed = "in-band-status";
-+ phys = <&comphy1 0>;
- sfp = <&sfp_eth0>;
- };
-
-@@ -150,6 +151,7 @@
- status = "okay";
- phy-mode = "sgmii";
- managed = "in-band-status";
-+ phys = <&comphy0 1>;
- sfp = <&sfp_eth1>;
- };
-
+++ /dev/null
-From 662eb8fc87f982e63ccb9a9df25c7aeabf9fe341 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Thu, 14 Nov 2019 00:23:35 +0000
-Subject: [PATCH 658/660] arm64: dts: uDPU: remove i2c-fast-mode
-
-The I2C bus violates the timing specifications when run in fast mode
-on the uDPU, so switch to 100kHz mode.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
-@@ -119,12 +119,14 @@
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
-+ /delete-property/mrvl,i2c-fast-mode;
- };
-
- &i2c1 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
-+ /delete-property/mrvl,i2c-fast-mode;
-
- lm75@48 {
- status = "okay";
+++ /dev/null
-From 1cb114a20854e34324a2cb308f23054ff8227ffa Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Tue, 19 Nov 2019 22:48:50 +0000
-Subject: [PATCH 659/660] arm64: dts: uDPU: SFP cages support 3W modules
-
-The SFP cages are designed to support up to 3W modules, such as G.hn,
-G.fast and MoCA modules. Although there is no way for such modules to
-declare to software that they consume 3W, we document in DT that this
-is the designed power level for these cages.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
-@@ -69,6 +69,7 @@
- mod-def0-gpio = <&gpiosb 3 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&gpiosb 4 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>;
-+ maximum-power-milliwatt = <3000>;
- };
-
- sfp_eth1: sfp-eth1 {
-@@ -78,6 +79,7 @@
- mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>;
- tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>;
- tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>;
-+ maximum-power-milliwatt = <3000>;
- };
- };
-
+++ /dev/null
---- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
-@@ -145,7 +145,7 @@
-
- ð0 {
- status = "okay";
-- phy-mode = "sgmii";
-+ phy-mode = "2500base-x";
- managed = "in-band-status";
- phys = <&comphy1 0>;
- sfp = <&sfp_eth0>;
-@@ -153,7 +153,7 @@
-
- ð1 {
- status = "okay";
-- phy-mode = "sgmii";
-+ phy-mode = "2500base-x";
- managed = "in-band-status";
- phys = <&comphy0 1>;
- sfp = <&sfp_eth1>;
+++ /dev/null
---- a/arch/arm/boot/dts/armada-388-helios4.dts
-+++ b/arch/arm/boot/dts/armada-388-helios4.dts
-@@ -15,6 +15,13 @@
- model = "Helios4";
- compatible = "kobol,helios4", "marvell,armada388",
- "marvell,armada385", "marvell,armada380";
-+
-+ aliases {
-+ led-boot = &led_status;
-+ led-failsafe = &led_status;
-+ led-running = &led_status;
-+ led-upgrade = &led_status;
-+ };
-
- memory {
- device_type = "memory";
-@@ -70,10 +77,9 @@
-
- system-leds {
- compatible = "gpio-leds";
-- status-led {
-+ led_status: status-led {
- label = "helios4:green:status";
- gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "heartbeat";
- default-state = "on";
- };
-
+++ /dev/null
---- a/arch/arm/mach-mvebu/Kconfig
-+++ b/arch/arm/mach-mvebu/Kconfig
-@@ -68,6 +68,7 @@ config MACH_ARMADA_38X
- select HAVE_SMP
- select MACH_MVEBU_V7
- select PINCTRL_ARMADA_38X
-+ select ARCH_WANT_LIBATA_LEDS
- help
- Say 'Y' here if you want your kernel to support boards based
- on the Marvell Armada 380/385 SoC with device tree.
+++ /dev/null
-CONFIG_64BIT=y
-CONFIG_ARCH_BINFMT_ELF_STATE=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_PHYS_TO_DMA=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MMAP_RND_BITS=12
-CONFIG_ARCH_MMAP_RND_BITS_MAX=18
-CONFIG_ARCH_MMAP_RND_BITS_MIN=12
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
-CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BUILTIN_DTB=y
-# CONFIG_CAVIUM_CN63XXP1 is not set
-CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE=2
-CONFIG_CAVIUM_OCTEON_LOCK_L2=y
-CONFIG_CAVIUM_OCTEON_LOCK_L2_EXCEPTION=y
-CONFIG_CAVIUM_OCTEON_LOCK_L2_INTERRUPT=y
-CONFIG_CAVIUM_OCTEON_LOCK_L2_LOW_LEVEL_INTERRUPT=y
-CONFIG_CAVIUM_OCTEON_LOCK_L2_MEMCPY=y
-CONFIG_CAVIUM_OCTEON_LOCK_L2_TLB=y
-CONFIG_CAVIUM_OCTEON_SOC=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_CAVIUM_OCTEON=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_RIXI=y
-CONFIG_CPU_HAS_SYNC=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_CPU_MIPSR2=y
-CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CPU_SUPPORTS_HUGEPAGES=y
-CONFIG_CRAMFS=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_MD5_OCTEON is not set
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG2=y
-# CONFIG_CRYPTO_SHA1_OCTEON is not set
-# CONFIG_CRYPTO_SHA256_OCTEON is not set
-# CONFIG_CRYPTO_SHA512_OCTEON is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DMA_DIRECT_OPS=y
-CONFIG_DNOTIFY=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_EXT4_FS=y
-CONFIG_F2FS_FS=y
-CONFIG_FAT_FS=y
-CONFIG_FIXED_PHY=y
-CONFIG_FRAME_WARN=2048
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_LIB_ASHLDI3=y
-CONFIG_GENERIC_LIB_ASHRDI3=y
-CONFIG_GENERIC_LIB_CMPDI2=y
-CONFIG_GENERIC_LIB_LSHRDI3=y
-CONFIG_GENERIC_LIB_UCMPDI2=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_OCTEON=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAS_RAPIDIO=y
-CONFIG_HAVE_64BIT_ALIGNED_ACCESS=y
-CONFIG_HAVE_ARCH_COMPILER_H=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_COPY_THREAD_TLS=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EBPF_JIT=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KVM=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_RSEQ=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HOLES_IN_ZONE=y
-# CONFIG_HUGETLBFS is not set
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_OCTEON=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_CAVIUM=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_OCTEON=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MIGRATION=y
-CONFIG_MIPS=y
-# CONFIG_MIPS32_N32 is not set
-# CONFIG_MIPS32_O32 is not set
-CONFIG_MIPS_ASID_BITS=8
-CONFIG_MIPS_ASID_SHIFT=0
-# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set
-CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER=y
-# CONFIG_MIPS_CMDLINE_FROM_DTB is not set
-CONFIG_MIPS_EBPF_JIT=y
-# CONFIG_MIPS_ELF_APPENDED_DTB is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=7
-CONFIG_MIPS_L1_CACHE_SHIFT_7=y
-# CONFIG_MIPS_NO_APPENDED_DTB is not set
-CONFIG_MIPS_NR_CPU_NR_MAP=1024
-CONFIG_MIPS_NR_CPU_NR_MAP_1024=y
-CONFIG_MIPS_PGD_C0_CONTEXT=y
-CONFIG_MIPS_RAW_APPENDED_DTB=y
-CONFIG_MIPS_SPRAM=y
-# CONFIG_MIPS_VA_BITS_48 is not set
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_CAVIUM_OCTEON=y
-# CONFIG_MMC_TIFM_SD is not set
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MODULES_USE_ELF_RELA=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_NR_CPUS=16
-CONFIG_NR_CPUS_DEFAULT_64=y
-CONFIG_NVMEM=y
-CONFIG_OCTEON_ETHERNET=y
-# CONFIG_OCTEON_ILM is not set
-CONFIG_OCTEON_MGMT_ETHERNET=y
-CONFIG_OCTEON_USB=y
-CONFIG_OCTEON_WDT=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_PADATA=y
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DRIVERS_LEGACY=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PHYLIB=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_RCU_NEED_SEGCBLIST=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_RELAY=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_SCSI=y
-CONFIG_SECCOMP=y
-CONFIG_SECCOMP_FILTER=y
-CONFIG_SERIAL_8250_DW=y
-CONFIG_SG_POOL=y
-CONFIG_SMP=y
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_SRCU=y
-CONFIG_SWIOTLB=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_HAS_CPU_CAVIUM_OCTEON=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_SYS_SUPPORTS_HOTPLUG_CPU=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_RELOCATABLE=y
-CONFIG_SYS_SUPPORTS_SMP=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-# CONFIG_USB_OCTEON_EHCI is not set
-# CONFIG_USB_OCTEON_OHCI is not set
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PLATFORM=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_VFAT_FS=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_WEAK_ORDERING=y
-CONFIG_XPS=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA32=y
+++ /dev/null
---- a/arch/mips/include/asm/octeon/cvmx-bootinfo.h
-+++ b/arch/mips/include/asm/octeon/cvmx-bootinfo.h
-@@ -295,6 +295,8 @@ enum cvmx_board_types_enum {
- */
- CVMX_BOARD_TYPE_CUST_PRIVATE_MIN = 20001,
- CVMX_BOARD_TYPE_UBNT_E100 = 20002,
-+ CVMX_BOARD_TYPE_UBNT_E200 = 20003,
-+ CVMX_BOARD_TYPE_UBNT_E220 = 20005,
- CVMX_BOARD_TYPE_CUST_DSR1000N = 20006,
- CVMX_BOARD_TYPE_KONTRON_S1901 = 21901,
- CVMX_BOARD_TYPE_CUST_PRIVATE_MAX = 30000,
-@@ -396,6 +398,8 @@ static inline const char *cvmx_board_typ
- /* Customer private range */
- ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_PRIVATE_MIN)
- ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E100)
-+ ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E200)
-+ ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_UBNT_E220)
- ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_DSR1000N)
- ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_KONTRON_S1901)
- ENUM_BRD_TYPE_CASE(CVMX_BOARD_TYPE_CUST_PRIVATE_MAX)
---- a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
-+++ b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c
-@@ -173,6 +173,8 @@ int cvmx_helper_board_get_mii_address(in
- return 7 - ipd_port;
- else
- return -1;
-+ case CVMX_BOARD_TYPE_UBNT_E200:
-+ return -1;
- case CVMX_BOARD_TYPE_KONTRON_S1901:
- if (ipd_port == CVMX_HELPER_BOARD_MGMT_IPD_PORT)
- return 1;
+++ /dev/null
---- a/drivers/staging/octeon/ethernet.c
-+++ b/drivers/staging/octeon/ethernet.c
-@@ -670,6 +670,7 @@ static int cvm_oct_probe(struct platform
- int interface;
- int fau = FAU_NUM_PACKET_BUFFERS_TO_FREE;
- int qos;
-+ int i;
- struct device_node *pip;
- int mtu_overhead = ETH_HLEN + ETH_FCS_LEN;
-
-@@ -793,13 +794,19 @@ static int cvm_oct_probe(struct platform
- }
-
- num_interfaces = cvmx_helper_get_number_of_interfaces();
-- for (interface = 0; interface < num_interfaces; interface++) {
-- cvmx_helper_interface_mode_t imode =
-- cvmx_helper_interface_get_mode(interface);
-- int num_ports = cvmx_helper_ports_on_interface(interface);
-+ for (i = 0; i < num_interfaces; i++) {
-+ cvmx_helper_interface_mode_t imode;
-+ int interface;
-+ int num_ports;
- int port;
- int port_index;
-
-+ interface = i;
-+ if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_UBNT_E200)
-+ interface = num_interfaces - (i + 1);
-+
-+ num_ports = cvmx_helper_ports_on_interface(interface);
-+ imode = cvmx_helper_interface_get_mode(interface);
- for (port_index = 0,
- port = cvmx_helper_get_ipd_port(interface, 0);
- port < cvmx_helper_get_ipd_port(interface, num_ports);
+++ /dev/null
---- a/arch/mips/cavium-octeon/setup.c
-+++ b/arch/mips/cavium-octeon/setup.c
-@@ -651,6 +651,35 @@ void octeon_user_io_init(void)
- write_c0_derraddr1(0);
- }
-
-+#ifdef CONFIG_IMAGE_CMDLINE_HACK
-+extern char __image_cmdline[];
-+
-+static int __init octeon_use_image_cmdline(void)
-+{
-+ char *p = __image_cmdline;
-+ int replace = 0;
-+
-+ if (*p == '-') {
-+ replace = 1;
-+ p++;
-+ }
-+
-+ if (*p == '\0')
-+ return 0;
-+
-+ if (replace) {
-+ strlcpy(arcs_cmdline, p, sizeof(arcs_cmdline));
-+ } else {
-+ strlcat(arcs_cmdline, " ", sizeof(arcs_cmdline));
-+ strlcat(arcs_cmdline, p, sizeof(arcs_cmdline));
-+ }
-+
-+ return 1;
-+}
-+#else
-+static inline int octeon_use_image_cmdline(void) { return 0; }
-+#endif
-+
- /**
- * Early entry point for arch setup
- */
-@@ -895,6 +924,8 @@ void __init prom_init(void)
- }
- }
-
-+ octeon_use_image_cmdline();
-+
- if (strstr(arcs_cmdline, "console=") == NULL) {
- if (octeon_uart == 1)
- strcat(arcs_cmdline, " console=ttyS1,115200");
+++ /dev/null
-# CONFIG_AHCI_DM816 is not set
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_AM335X_CONTROL_USB=y
-CONFIG_AM335X_PHY_USB=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_HAS_BANDGAP=y
-CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
-CONFIG_ARCH_HAS_KCOV=y
-CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
-CONFIG_ARCH_HAS_PHYS_TO_DMA=y
-CONFIG_ARCH_HAS_SET_MEMORY=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
-CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_ARCH_OMAP4=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARM=y
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
-CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_ERRATA_430973=y
-CONFIG_ARM_ERRATA_720789=y
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_ARM_ERRATA_775420=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_HEAVY_MB=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-# CONFIG_ARM_LPAE is not set
-CONFIG_ARM_OMAP2PLUS_CPUFREQ=y
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_THUMBEE=y
-CONFIG_ARM_TI_CPUFREQ=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ASSOCIATIVE_ARRAY=y
-CONFIG_AT803X_PHY=y
-CONFIG_ATA=y
-CONFIG_AUDIT=y
-CONFIG_AUDITSYSCALL=y
-CONFIG_AUDIT_GENERIC=y
-CONFIG_AUDIT_TREE=y
-CONFIG_AUDIT_WATCH=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_BACKLIGHT_TPS65217 is not set
-CONFIG_BCH=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BOUNCE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BUILD_BIN2C=y
-CONFIG_CACHE_L2X0=y
-CONFIG_CC_HAS_ASM_GOTO=y
-CONFIG_CEC_CORE=y
-# CONFIG_CHARGER_TPS65217 is not set
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLKSRC_TI_32K=y
-CONFIG_CLK_TWL6040=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMA=y
-CONFIG_CMA_ALIGNMENT=8
-CONFIG_CMA_AREAS=7
-# CONFIG_CMA_DEBUG is not set
-# CONFIG_CMA_DEBUGFS is not set
-CONFIG_CMA_SIZE_MBYTES=16
-# CONFIG_CMA_SIZE_SEL_MAX is not set
-CONFIG_CMA_SIZE_SEL_MBYTES=y
-# CONFIG_CMA_SIZE_SEL_MIN is not set
-# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
-CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200"
-CONFIG_COMMON_CLK=y
-# CONFIG_COMMON_CLK_PALMAS is not set
-# CONFIG_COMMON_CLK_TI_ADPLL is not set
-CONFIG_CONFIGFS_FS=y
-CONFIG_CONNECTOR=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPUFREQ_DT_PLATDEV=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_HAS_ASID=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SPECTRE=y
-CONFIG_CPU_THERMAL=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRAMFS=y
-CONFIG_CRC16=y
-CONFIG_CRC7=y
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CRYPTO_ACOMP2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CRCT10DIF=y
-CONFIG_CRYPTO_CTR=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_DEV_OMAP=y
-CONFIG_CRYPTO_DEV_OMAP_AES=y
-CONFIG_CRYPTO_DEV_OMAP_DES=y
-CONFIG_CRYPTO_DEV_OMAP_SHAM=y
-CONFIG_CRYPTO_DRBG=y
-CONFIG_CRYPTO_DRBG_HMAC=y
-CONFIG_CRYPTO_DRBG_MENU=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_ENGINE=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_JITTERENTROPY=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_RNG_DEFAULT=y
-CONFIG_CRYPTO_SEQIV=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DDR=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-# CONFIG_DEBUG_USER is not set
-CONFIG_DM9000=y
-# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
-CONFIG_DMADEVICES=y
-CONFIG_DMA_CMA=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_OMAP=y
-CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_DNS_RESOLVER=y
-CONFIG_DRM=y
-CONFIG_DRM_BRIDGE=y
-CONFIG_DRM_KMS_HELPER=y
-CONFIG_DRM_OMAP=y
-CONFIG_DRM_OMAP_CONNECTOR_ANALOG_TV=y
-CONFIG_DRM_OMAP_CONNECTOR_DVI=y
-CONFIG_DRM_OMAP_CONNECTOR_HDMI=y
-# CONFIG_DRM_OMAP_ENCODER_OPA362 is not set
-CONFIG_DRM_OMAP_ENCODER_TFP410=y
-CONFIG_DRM_OMAP_ENCODER_TPD12S015=y
-CONFIG_DRM_OMAP_PANEL_DPI=y
-CONFIG_DRM_OMAP_PANEL_DSI_CM=y
-CONFIG_DRM_OMAP_PANEL_LGPHILIPS_LB035Q02=y
-CONFIG_DRM_OMAP_PANEL_NEC_NL8048HL11=y
-CONFIG_DRM_OMAP_PANEL_SHARP_LS037V7DW01=y
-CONFIG_DRM_OMAP_PANEL_SONY_ACX565AKM=y
-CONFIG_DRM_OMAP_PANEL_TPO_TD028TTEC1=y
-CONFIG_DRM_OMAP_PANEL_TPO_TD043MTEA1=y
-CONFIG_DRM_PANEL=y
-CONFIG_DRM_PANEL_BRIDGE=y
-CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
-# CONFIG_DRM_PANEL_SIMPLE is not set
-# CONFIG_DRM_TVE200 is not set
-CONFIG_DTC=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EEPROM_93CX6=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-CONFIG_EXT4_FS=y
-CONFIG_EXTCON=y
-CONFIG_EXTCON_PALMAS=y
-CONFIG_EXTCON_USB_GPIO=y
-CONFIG_F2FS_FS=y
-CONFIG_FANOTIFY=y
-CONFIG_FAT_FS=y
-CONFIG_FB_CMDLINE=y
-CONFIG_FHANDLE=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FRAME_POINTER=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_OMAP=y
-CONFIG_GPIO_PALMAS=y
-CONFIG_GPIO_PCA953X=y
-CONFIG_GPIO_PCA953X_IRQ=y
-CONFIG_GPIO_PCF857X=y
-# CONFIG_GPIO_TPS65218 is not set
-CONFIG_GPIO_TPS65910=y
-CONFIG_GPIO_TWL4030=y
-CONFIG_GPIO_TWL6040=y
-CONFIG_GRACE_PERIOD=y
-CONFIG_GRO_CELLS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_BITREVERSE=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARM_SCU=y
-CONFIG_HAVE_ARM_SMCCC=y
-CONFIG_HAVE_ARM_TWD=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
-CONFIG_HAVE_EBPF_JIT=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_RSEQ=y
-CONFIG_HAVE_SMP=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HDMI=y
-CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
-CONFIG_HSI=y
-CONFIG_HSI_BOARDINFO=y
-# CONFIG_HSI_CHAR is not set
-CONFIG_HWMON=y
-CONFIG_HZ_FIXED=0
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_OMAP=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KEYS=y
-CONFIG_KPROBES=y
-CONFIG_KRETPROBES=y
-CONFIG_KS8851=y
-CONFIG_KS8851_MLL=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_PLATFORM=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_PWM=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_ONESHOT=y
-CONFIG_LIBCRC32C=y
-CONFIG_LIBFDT=y
-CONFIG_LOCKD=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-# CONFIG_MACH_OMAP3517EVM is not set
-# CONFIG_MACH_OMAP3_PANDORA is not set
-CONFIG_MACH_OMAP_GENERIC=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MEMORY=y
-CONFIG_MEMORY_ISOLATION=y
-CONFIG_MFD_CORE=y
-CONFIG_MFD_PALMAS=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MFD_TI_AM335X_TSCADC=y
-CONFIG_MFD_TPS65217=y
-CONFIG_MFD_TPS65218=y
-CONFIG_MFD_TPS65910=y
-CONFIG_MFD_TWL4030_AUDIO=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_OMAP is not set
-CONFIG_MMC_OMAP_HS=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MSDOS_FS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_BCH=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_ECC_BCH=y
-CONFIG_MTD_NAND_OMAP2=y
-CONFIG_MTD_NAND_OMAP_BCH=y
-CONFIG_MTD_NAND_OMAP_BCH_BUILD=y
-CONFIG_MTD_ONENAND=y
-# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
-# CONFIG_MTD_ONENAND_GENERIC is not set
-CONFIG_MTD_ONENAND_OMAP2=y
-# CONFIG_MTD_ONENAND_OTP is not set
-CONFIG_MTD_ONENAND_VERIFY_WRITE=y
-CONFIG_MTD_OOPS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-# CONFIG_MTD_UBI_BLOCK is not set
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEON=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_KEY=y
-CONFIG_NET_KEY_MIGRATE=y
-CONFIG_NET_PTP_CLASSIFY=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_USE_KERNEL_DNS=y
-# CONFIG_NFS_USE_LEGACY_DNS is not set
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NOP_USB_XCEIV=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NO_HZ=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=4
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OID_REGISTRY=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OMAP2_DSS=y
-CONFIG_OMAP2_DSS_DPI=y
-CONFIG_OMAP2_DSS_DSI=y
-CONFIG_OMAP2_DSS_HDMI_COMMON=y
-CONFIG_OMAP2_DSS_INIT=y
-CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
-CONFIG_OMAP2_DSS_SDI=y
-CONFIG_OMAP2_DSS_SLEEP_AFTER_VENC_RESET=y
-CONFIG_OMAP2_DSS_VENC=y
-# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
-# CONFIG_OMAP3_SDRC_AC_TIMING is not set
-CONFIG_OMAP3_THERMAL=y
-CONFIG_OMAP4_DSS_HDMI=y
-CONFIG_OMAP4_DSS_HDMI_CEC=y
-CONFIG_OMAP4_THERMAL=y
-CONFIG_OMAP5_DSS_HDMI=y
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_CONTROL_PHY=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_DSS_BASE=y
-CONFIG_OMAP_GPMC=y
-# CONFIG_OMAP_GPMC_DEBUG is not set
-CONFIG_OMAP_INTERCONNECT=y
-CONFIG_OMAP_INTERCONNECT_BARRIER=y
-CONFIG_OMAP_IRQCHIP=y
-CONFIG_OMAP_OCP2SCP=y
-CONFIG_OMAP_RESET_CLOCKS=y
-# CONFIG_OMAP_SSI is not set
-CONFIG_OMAP_USB2=y
-CONFIG_OMAP_WATCHDOG=y
-CONFIG_OPROFILE=y
-CONFIG_OPTPROBES=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-# CONFIG_PHY_DM816X_USB is not set
-CONFIG_PINCTRL=y
-# CONFIG_PINCTRL_PALMAS is not set
-CONFIG_PL310_ERRATA_588369=y
-CONFIG_PL310_ERRATA_727915=y
-# CONFIG_PL310_ERRATA_753970 is not set
-# CONFIG_PL310_ERRATA_769419 is not set
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_OPP=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-CONFIG_POWER_AVS=y
-CONFIG_POWER_AVS_OMAP=y
-CONFIG_POWER_AVS_OMAP_CLASS3=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PPS=y
-CONFIG_PRINTK_TIME=y
-CONFIG_PRINT_QUOTA_WARNING=y
-CONFIG_PROC_EVENTS=y
-CONFIG_PROFILING=y
-CONFIG_PTP_1588_CLOCK=y
-CONFIG_PWM=y
-# CONFIG_PWM_OMAP_DMTIMER is not set
-CONFIG_PWM_SYSFS=y
-CONFIG_PWM_TIECAP=y
-CONFIG_PWM_TIEHRPWM=y
-CONFIG_PWM_TIPWMSS=y
-# CONFIG_PWM_TWL is not set
-# CONFIG_PWM_TWL_LED is not set
-# CONFIG_QFMT_V1 is not set
-CONFIG_QFMT_V2=y
-CONFIG_QUOTA=y
-CONFIG_QUOTACTL=y
-# CONFIG_QUOTA_NETLINK_INTERFACE is not set
-CONFIG_QUOTA_TREE=y
-CONFIG_RATIONAL=y
-CONFIG_RCU_NEED_SEGCBLIST=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_REFCOUNT_FULL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_IRQ=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_PALMAS=y
-CONFIG_REGULATOR_PBIAS=y
-CONFIG_REGULATOR_TI_ABB=y
-CONFIG_REGULATOR_TPS62360=y
-CONFIG_REGULATOR_TPS65023=y
-CONFIG_REGULATOR_TPS6507X=y
-CONFIG_REGULATOR_TPS65217=y
-CONFIG_REGULATOR_TPS65218=y
-CONFIG_REGULATOR_TPS65910=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RING_BUFFER=y
-CONFIG_RING_BUFFER_ALLOW_SWAP=y
-CONFIG_ROOT_NFS=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_RTC_DRV_OMAP=y
-CONFIG_RTC_DRV_PALMAS=y
-# CONFIG_RTC_DRV_TPS65910 is not set
-CONFIG_RTC_DRV_TWL4030=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RTC_MC146818_LIB=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SATA_AHCI_PLATFORM=y
-CONFIG_SCHEDSTATS=y
-CONFIG_SCHED_INFO=y
-CONFIG_SCHED_MC=y
-CONFIG_SCSI=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SDIO_UART=y
-CONFIG_SECCOMP=y
-CONFIG_SECCOMP_FILTER=y
-CONFIG_SENSORS_GPIO_FAN=y
-CONFIG_SENSORS_LM75=y
-CONFIG_SENSORS_TMP102=y
-CONFIG_SENSORS_TSL2550=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_NR_UARTS=32
-# CONFIG_SERIAL_8250_OMAP is not set
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIAL_OMAP=y
-CONFIG_SERIAL_OMAP_CONSOLE=y
-CONFIG_SERIO=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SG_POOL=y
-CONFIG_SG_SPLIT=y
-CONFIG_SMC91X=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SMSC911X=y
-CONFIG_SMSC_PHY=y
-CONFIG_SND=y
-CONFIG_SND_AM33XX_SOC_EVM=y
-# CONFIG_SND_COMPRESS_OFFLOAD is not set
-CONFIG_SND_DAVINCI_SOC_GENERIC_EVM=y
-# CONFIG_SND_DAVINCI_SOC_I2S is not set
-CONFIG_SND_DAVINCI_SOC_MCASP=y
-CONFIG_SND_DMAENGINE_PCM=y
-CONFIG_SND_EDMA_SOC=y
-CONFIG_SND_JACK=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_OMAP_SOC_DMIC=y
-CONFIG_SND_OMAP_SOC_HDMI_AUDIO=y
-CONFIG_SND_OMAP_SOC_MCBSP=y
-CONFIG_SND_OMAP_SOC_MCPDM=y
-CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=y
-CONFIG_SND_OMAP_SOC_OMAP_TWL4030=y
-# CONFIG_SND_OMAP_SOC_RX51 is not set
-CONFIG_SND_PCM=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_SDMA_SOC=y
-CONFIG_SND_SIMPLE_CARD=y
-CONFIG_SND_SIMPLE_CARD_UTILS=y
-CONFIG_SND_SOC=y
-CONFIG_SND_SOC_DMIC=y
-CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-CONFIG_SND_SOC_TLV320AIC3X=y
-CONFIG_SND_SOC_TWL4030=y
-CONFIG_SND_SOC_TWL6040=y
-CONFIG_SND_VERBOSE_PRINTK=y
-CONFIG_SOC_AM33XX=y
-CONFIG_SOC_AM43XX=y
-CONFIG_SOC_BUS=y
-CONFIG_SOC_HAS_OMAP2_SDRC=y
-CONFIG_SOC_OMAP3430=y
-# CONFIG_SOC_TI81XX is not set
-CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SPI_OMAP24XX=y
-CONFIG_SPI_TI_QSPI=y
-CONFIG_SRAM=y
-CONFIG_SRAM_EXEC=y
-CONFIG_SRCU=y
-CONFIG_STACKTRACE=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-CONFIG_SWPHY=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYNC_FILE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_FAIR_SHARE=y
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_GOV_USER_SPACE=y
-CONFIG_THERMAL_OF=y
-# CONFIG_THUMB2_KERNEL is not set
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TI_CPPI41=y
-CONFIG_TI_CPSW=y
-CONFIG_TI_CPSW_ALE=y
-CONFIG_TI_CPSW_PHY_SEL=y
-CONFIG_TI_CPTS=y
-CONFIG_TI_CPTS_MOD=y
-CONFIG_TI_DAVINCI_CPDMA=y
-CONFIG_TI_DAVINCI_EMAC=y
-CONFIG_TI_DAVINCI_MDIO=y
-CONFIG_TI_DMA_CROSSBAR=y
-CONFIG_TI_EDMA=y
-CONFIG_TI_EMIF=y
-# CONFIG_TI_EMIF_SRAM is not set
-CONFIG_TI_PIPE3=y
-CONFIG_TI_SOC_THERMAL=y
-CONFIG_TI_SYSC=y
-CONFIG_TI_THERMAL=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_TRACE_CLOCK=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_TWL4030_CORE=y
-CONFIG_TWL4030_POWER=y
-CONFIG_TWL4030_USB=y
-CONFIG_TWL4030_WATCHDOG=y
-# CONFIG_TWL6030_USB is not set
-CONFIG_TWL6040_CORE=y
-CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_DUAL_ROLE=y
-# CONFIG_USB_DWC3_GADGET is not set
-# CONFIG_USB_DWC3_HOST is not set
-CONFIG_USB_DWC3_OMAP=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_OMAP=y
-# CONFIG_USB_EHCI_HCD_PLATFORM is not set
-CONFIG_USB_GADGET=y
-CONFIG_USB_INVENTRA_DMA=y
-CONFIG_USB_MUSB_AM335X_CHILD=y
-CONFIG_USB_MUSB_AM35X=y
-CONFIG_USB_MUSB_DSPS=y
-CONFIG_USB_MUSB_DUAL_ROLE=y
-# CONFIG_USB_MUSB_GADGET is not set
-CONFIG_USB_MUSB_HDRC=y
-# CONFIG_USB_MUSB_HOST is not set
-CONFIG_USB_MUSB_OMAP2PLUS=y
-CONFIG_USB_MUSB_TUSB6010=y
-CONFIG_USB_PHY=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_TI_CPPI41_DMA=y
-CONFIG_USB_TUSB_OMAP_DMA=y
-# CONFIG_USERIO is not set
-CONFIG_USE_OF=y
-CONFIG_VFAT_FS=y
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_VIDEOMODE_HELPERS=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XFRM_ALGO=y
-CONFIG_XFRM_MIGRATE=y
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
+++ /dev/null
-# CONFIG_AHCI_SUNXI is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_ARCH_AXXIA is not set
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_KCOV=y
-CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
-CONFIG_ARCH_HAS_PHYS_TO_DMA=y
-CONFIG_ARCH_HAS_PTE_SPECIAL=y
-CONFIG_ARCH_HAS_RESET_CONTROLLER=y
-CONFIG_ARCH_HAS_SET_MEMORY=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
-CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_NR_GPIO=416
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_SUNXI=y
-CONFIG_ARCH_SUNXI_MC_SMP=y
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARM=y
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
-CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
-CONFIG_ARM_CCI=y
-CONFIG_ARM_CCI400_COMMON=y
-CONFIG_ARM_CCI400_PORT_CTRL=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_ERRATA_643719=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GIC_V3=y
-CONFIG_ARM_GIC_V3_ITS=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_HEAVY_MB=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_ARM_LPAE=y
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_PMU=y
-CONFIG_ARM_PSCI=y
-CONFIG_ARM_PSCI_FW=y
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ATA=y
-CONFIG_ATAGS=y
-# CONFIG_ATA_SFF is not set
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_AXP20X_POWER=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_PWM=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BOUNCE=y
-CONFIG_CACHE_L2X0=y
-CONFIG_CAN=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_CONNECTOR=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_COREDUMP=y
-CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPUFREQ_DT_PLATDEV=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_HAS_ASID=y
-# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SPECTRE=y
-CONFIG_CPU_THERMAL=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CRCT10DIF=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_DEV_SUN4I_SS=y
-CONFIG_CRYPTO_DEV_SUN4I_SS_PRNG=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_USER is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_SUN4I=y
-CONFIG_DMA_SUN6I=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_DNOTIFY=y
-CONFIG_DTC=y
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_DWMAC_DWC_QOS_ETH is not set
-CONFIG_DWMAC_GENERIC=y
-# CONFIG_DWMAC_SUN8I is not set
-CONFIG_DWMAC_SUNXI=y
-CONFIG_DYNAMIC_DEBUG=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_ELF_CORE=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_EXT4_FS=y
-CONFIG_EXTCON=y
-CONFIG_F2FS_FS=y
-CONFIG_FAT_FS=y
-CONFIG_FB=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_CMDLINE=y
-CONFIG_FB_FOREIGN_ENDIAN=y
-CONFIG_FB_LITTLE_ENDIAN=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_SIMPLE=y
-CONFIG_FB_TILEBLITTING=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x16=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_SUPPORT=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FRAME_WARN=2048
-CONFIG_FREEZER=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_BITREVERSE=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
-CONFIG_HAVE_ARM_ARCH_TIMER=y
-CONFIG_HAVE_ARM_SMCCC=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
-CONFIG_HAVE_EBPF_JIT=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_GUP=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KVM_ARCH_TLB_FLUSH_ALL=y
-CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
-CONFIG_HAVE_KVM_EVENTFD=y
-CONFIG_HAVE_KVM_IRQCHIP=y
-CONFIG_HAVE_KVM_IRQFD=y
-CONFIG_HAVE_KVM_IRQ_BYPASS=y
-CONFIG_HAVE_KVM_IRQ_ROUTING=y
-CONFIG_HAVE_KVM_MSI=y
-CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_RCU_TABLE_FREE=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_RSEQ=y
-CONFIG_HAVE_SMP=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
-CONFIG_HOTPLUG_CPU=y
-# CONFIG_HUGETLBFS is not set
-CONFIG_HWMON=y
-CONFIG_HW_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_TIMERIOMEM=y
-CONFIG_HZ_FIXED=0
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_COMPAT=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_MV64XXX=y
-CONFIG_I2C_SUN6I_P2WI=y
-CONFIG_IIO=y
-# CONFIG_IIO_BUFFER is not set
-# CONFIG_IIO_TRIGGER is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=y
-CONFIG_INPUT_AXP20X_PEK=y
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_BYPASS_MANAGER=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-CONFIG_KALLSYMS=y
-# CONFIG_KERNEL_MODE_NEON is not set
-CONFIG_KEYBOARD_SUN4I_LRADC=y
-CONFIG_KSM=y
-CONFIG_KVM=y
-CONFIG_KVM_ARM_HOST=y
-CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
-CONFIG_KVM_MMIO=y
-CONFIG_KVM_VFIO=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_LCD_PLATFORM=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_MACH_SUN4I=y
-CONFIG_MACH_SUN5I=y
-CONFIG_MACH_SUN6I=y
-CONFIG_MACH_SUN7I=y
-CONFIG_MACH_SUN8I=y
-CONFIG_MACH_SUN9I=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_SUN4I=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_MEMFD_CREATE=y
-# CONFIG_MFD_AC100 is not set
-CONFIG_MFD_AXP20X=y
-CONFIG_MFD_AXP20X_I2C=y
-CONFIG_MFD_AXP20X_RSB=y
-CONFIG_MFD_CORE=y
-CONFIG_MFD_SUN6I_PRCM=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_SUNXI=y
-CONFIG_MMU_NOTIFIER=y
-CONFIG_MODULES_TREE_LOOKUP=y
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MTD_IMPA7 is not set
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_FIT_FW=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEON=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_PTP_CLASSIFY=y
-CONFIG_NET_VENDOR_ALLWINNER=y
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NO_HZ=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=8
-CONFIG_NVMEM=y
-CONFIG_NVMEM_SUNXI_SID=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_PARTITION_PERCPU=y
-CONFIG_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PHYLIB=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PHY_SUN4I_USB=y
-CONFIG_PHY_SUN9I_USB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_AXP209=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PINCTRL_SUN4I_A10=y
-CONFIG_PINCTRL_SUN5I=y
-CONFIG_PINCTRL_SUN6I_A31=y
-CONFIG_PINCTRL_SUN6I_A31_R=y
-CONFIG_PINCTRL_SUN8I_A23=y
-CONFIG_PINCTRL_SUN8I_A23_R=y
-CONFIG_PINCTRL_SUN8I_A33=y
-CONFIG_PINCTRL_SUN8I_A83T=y
-CONFIG_PINCTRL_SUN8I_A83T_R=y
-CONFIG_PINCTRL_SUN8I_H3=y
-CONFIG_PINCTRL_SUN8I_H3_R=y
-CONFIG_PINCTRL_SUN8I_V3S=y
-CONFIG_PINCTRL_SUN9I_A80=y
-CONFIG_PINCTRL_SUN9I_A80_R=y
-CONFIG_PINCTRL_SUNXI=y
-# CONFIG_PL310_ERRATA_588369 is not set
-# CONFIG_PL310_ERRATA_727915 is not set
-# CONFIG_PL310_ERRATA_753970 is not set
-# CONFIG_PL310_ERRATA_769419 is not set
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_OPP=y
-CONFIG_PM_SLEEP=y
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PPS=y
-CONFIG_PREEMPT=y
-CONFIG_PREEMPT_COUNT=y
-# CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_NOTIFIERS=y
-CONFIG_PREEMPT_RCU=y
-CONFIG_PRINTK_TIME=y
-CONFIG_PROC_EVENTS=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_PTP_1588_CLOCK=y
-CONFIG_PWM=y
-CONFIG_PWM_SUN4I=y
-CONFIG_PWM_SYSFS=y
-CONFIG_RATIONAL=y
-# CONFIG_RCU_BOOST is not set
-CONFIG_RCU_NEED_SEGCBLIST=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_REFCOUNT_FULL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_IRQ=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_AXP20X=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_REGULATOR_SY8106A=y
-CONFIG_RELAY=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RESET_SIMPLE=y
-CONFIG_RESET_SUNXI=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SATA_PMP=y
-CONFIG_SCSI=y
-CONFIG_SDIO_UART=y
-CONFIG_SECURITYFS=y
-CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
-CONFIG_SERIAL_8250_DW=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_NR_UARTS=8
-CONFIG_SERIAL_8250_RUNTIME_UARTS=8
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SG_POOL=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SND=y
-CONFIG_SND_COMPRESS_OFFLOAD=y
-CONFIG_SND_JACK=y
-CONFIG_SND_JACK_INPUT_DEV=y
-CONFIG_SND_PCM=y
-CONFIG_SND_SIMPLE_CARD=y
-CONFIG_SND_SIMPLE_CARD_UTILS=y
-CONFIG_SND_SOC=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SUN4I_I2S is not set
-# CONFIG_SND_SUN4I_SPDIF is not set
-# CONFIG_SND_SUN8I_CODEC is not set
-# CONFIG_SND_SUN8I_CODEC_ANALOG is not set
-CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SPI_SUN4I=y
-CONFIG_SPI_SUN6I=y
-CONFIG_SRCU=y
-CONFIG_STMMAC_ETH=y
-CONFIG_STMMAC_PLATFORM=y
-CONFIG_SUN4I_A10_CCU=y
-# CONFIG_SUN4I_EMAC is not set
-CONFIG_SUN4I_TIMER=y
-CONFIG_SUN5I_CCU=y
-CONFIG_SUN5I_HSTIMER=y
-CONFIG_SUN6I_A31_CCU=y
-CONFIG_SUN8I_A23_CCU=y
-CONFIG_SUN8I_A33_CCU=y
-CONFIG_SUN8I_A83T_CCU=y
-CONFIG_SUN8I_DE2_CCU=y
-CONFIG_SUN8I_H3_CCU=y
-CONFIG_SUN8I_R40_CCU=y
-CONFIG_SUN8I_R_CCU=y
-CONFIG_SUN8I_V3S_CCU=y
-CONFIG_SUN9I_A80_CCU=y
-CONFIG_SUNXI_CCU=y
-CONFIG_SUNXI_RSB=y
-CONFIG_SUNXI_SRAM=y
-CONFIG_SUNXI_WATCHDOG=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_SWCONFIG=y
-CONFIG_SWCONFIG_B53=y
-# CONFIG_SWCONFIG_B53_MMAP_DRIVER is not set
-CONFIG_SWCONFIG_B53_PHY_DRIVER=y
-CONFIG_SWCONFIG_B53_PHY_FIXUP=y
-# CONFIG_SWCONFIG_B53_SRAB_DRIVER is not set
-CONFIG_SWPHY=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYSFS_SYSCALL=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_TASKS_RCU=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_HWMON=y
-CONFIG_THERMAL_OF=y
-# CONFIG_THUMB2_KERNEL is not set
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_TOUCHSCREEN_PROPERTIES=y
-CONFIG_TOUCHSCREEN_SUN4I=y
-CONFIG_TREE_SRCU=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNINLINE_SPIN_UNLOCK=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_DWC2=y
-CONFIG_USB_DWC2_HOST=y
-# CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_NET_DRIVERS=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PLATFORM=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USERIO=y
-CONFIG_USE_OF=y
-CONFIG_VFAT_FS=y
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_VHOST=y
-CONFIG_VHOST_NET=y
-CONFIG_VIRTUALIZATION=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_CONSOLE_SLEEP=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
+++ /dev/null
-CONFIG_64BIT=y
-CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
-CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
-CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
-CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
-CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
-CONFIG_ARCH_MMAP_RND_BITS=18
-CONFIG_ARCH_MMAP_RND_BITS_MAX=24
-CONFIG_ARCH_MMAP_RND_BITS_MIN=18
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_ARCH_SUPPORTS_INT128=y
-CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
-CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
-CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
-CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
-CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WANT_FRAME_POINTERS=y
-CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
-CONFIG_ARM64=y
-# CONFIG_ARM64_16K_PAGES is not set
-CONFIG_ARM64_4K_PAGES=y
-# CONFIG_ARM64_64K_PAGES is not set
-CONFIG_ARM64_CONT_SHIFT=4
-# CONFIG_ARM64_CRYPTO is not set
-# CONFIG_ARM64_HW_AFDBM is not set
-# CONFIG_ARM64_LSE_ATOMICS is not set
-CONFIG_ARM64_PAGE_SHIFT=12
-# CONFIG_ARM64_PAN is not set
-CONFIG_ARM64_PA_BITS=48
-CONFIG_ARM64_PA_BITS_48=y
-# CONFIG_ARM64_PMEM is not set
-# CONFIG_ARM64_PTDUMP_DEBUGFS is not set
-# CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET is not set
-CONFIG_ARM64_SSBD=y
-# CONFIG_ARM64_UAO is not set
-CONFIG_ARM64_VA_BITS=39
-CONFIG_ARM64_VA_BITS_39=y
-# CONFIG_ARM64_VA_BITS_48 is not set
-# CONFIG_ARM64_VHE is not set
-CONFIG_ARM_AMBA=y
-# CONFIG_ARM_SP805_WATCHDOG is not set
-CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
-CONFIG_DMA_DIRECT_OPS=y
-CONFIG_DWMAC_SUN8I=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
-CONFIG_HAVE_ARCH_HUGE_VMAP=y
-CONFIG_HAVE_ARCH_KASAN=y
-CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
-CONFIG_HAVE_ARCH_VMAP_STACK=y
-CONFIG_HAVE_CMPXCHG_DOUBLE=y
-CONFIG_HAVE_CMPXCHG_LOCAL=y
-CONFIG_HAVE_DEBUG_BUGVERBOSE=y
-CONFIG_HAVE_KVM_VCPU_RUN_PID_CHANGE=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_HAVE_PATA_PLATFORM=y
-CONFIG_HOLES_IN_ZONE=y
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_KERNEL_MODE_NEON=y
-CONFIG_KVM_ARM_PMU=y
-CONFIG_KVM_INDIRECT_VECTORS=y
-CONFIG_MDIO_BUS_MUX=y
-CONFIG_MODULES_USE_ELF_RELA=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_NO_IOPORT_MAP=y
-# CONFIG_NUMA is not set
-CONFIG_PINCTRL_SUN50I_A64=y
-CONFIG_PINCTRL_SUN50I_A64_R=y
-CONFIG_PINCTRL_SUN50I_H5=y
-CONFIG_PINCTRL_SUN50I_H6=y
-CONFIG_PINCTRL_SUN50I_H6_R=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-# CONFIG_RANDOMIZE_BASE is not set
-CONFIG_REALTEK_PHY=y
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SUN50I_A64_CCU=y
-CONFIG_SUN50I_DE2_BUS=y
-CONFIG_SUN50I_ERRATUM_UNKNOWN1=y
-CONFIG_SUN50I_H6_CCU=y
-CONFIG_SUN50I_H6_R_CCU=y
-CONFIG_SWIOTLB=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_UNMAP_KERNEL_AT_EL0=y
-CONFIG_VMAP_STACK=y
-CONFIG_ZONE_DMA32=y
+++ /dev/null
-CONFIG_DWMAC_SUN8I=y
-# CONFIG_MACH_SUN4I is not set
-# CONFIG_MACH_SUN5I is not set
-CONFIG_MDIO_BUS_MUX=y
+++ /dev/null
-# CONFIG_ARM_ERRATA_643719 is not set
-# CONFIG_ARM_LPAE is not set
-# CONFIG_MACH_SUN6I is not set
-# CONFIG_MACH_SUN7I is not set
-# CONFIG_MACH_SUN8I is not set
-# CONFIG_MACH_SUN9I is not set
-CONFIG_PGTABLE_LEVELS=2
-# CONFIG_PHY_SUN9I_USB is not set
-# CONFIG_SPI_SUN6I is not set
-# CONFIG_SUN8I_A83T_CCU is not set
+++ /dev/null
-From 120357ea176e420d313cf8cf2ff35fbe233d3bab Mon Sep 17 00:00:00 2001
-From: Uenal Mutlu <um@mutluit.com>
-Date: Mon, 13 May 2019 16:24:10 +0200
-Subject: [PATCH] drivers: ata: ahci_sunxi: Increased SATA/AHCI DMA TX/RX FIFOs
-
-Increasing the SATA/AHCI DMA TX/RX FIFOs (P0DMACR.TXTS and .RXTS, ie.
-TX_TRANSACTION_SIZE and RX_TRANSACTION_SIZE) from default 0x0 each
-to 0x3 each, gives a write performance boost of 120 MiB/s to 132 MiB/s
-from lame 36 MiB/s to 45 MiB/s previously.
-Read performance is above 200 MiB/s.
-[tested on SSD using dd bs=4K/8K/12K/16K/20K/24K/32K: peak-perf at 12K]
-
-Tested on the SBCs Banana Pi R1 (aka Lamobo R1) and Banana Pi M1 which
-are based on the Allwinner A20 32bit-SoC (ARMv7-a / arm-linux-gnueabihf).
-These devices are RaspberryPi-like small devices.
-
-This problem of slow SATA write-speed with these small devices lasts
-for about 7 years now (beginning with the A10 SoC). Many commentators
-throughout the years wrongly assumed the slow write speed was a
-hardware limitation. This patch finally solves the problem, which
-in fact was just a hard-to-find software problem due to lack of
-SATA/AHCI documentation by the SoC-maker Allwinner Technology.
-
-Lists of the affected sunxi and other boards and SoCs with SATA using
-the ahci_sunxi driver:
- $ grep -i -e "^&ahci" arch/arm/boot/dts/sun*dts
- and http://linux-sunxi.org/SATA#Devices_with_SATA_ports
- See also http://linux-sunxi.org/Category:Devices_with_SATA_port
-
-Tested-by: Chen-Yu Tsai <wens@csie.org>
-Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
-Reviewed-by: Hans de Goede <hdegoede@redhat.com>
-Signed-off-by: Uenal Mutlu <um@mutluit.com>
-Signed-off-by: Jens Axboe <axboe@kernel.dk>
----
- drivers/ata/ahci_sunxi.c | 47 ++++++++++++++++++++++++++++++++++++++--
- 1 file changed, 45 insertions(+), 2 deletions(-)
-
---- a/drivers/ata/ahci_sunxi.c
-+++ b/drivers/ata/ahci_sunxi.c
-@@ -157,8 +157,51 @@ static void ahci_sunxi_start_engine(stru
- void __iomem *port_mmio = ahci_port_base(ap);
- struct ahci_host_priv *hpriv = ap->host->private_data;
-
-- /* Setup DMA before DMA start */
-- sunxi_clrsetbits(hpriv->mmio + AHCI_P0DMACR, 0x0000ff00, 0x00004400);
-+ /* Setup DMA before DMA start
-+ *
-+ * NOTE: A similar SoC with SATA/AHCI by Texas Instruments documents
-+ * this Vendor Specific Port (P0DMACR, aka PxDMACR) in its
-+ * User's Guide document (TMS320C674x/OMAP-L1x Processor
-+ * Serial ATA (SATA) Controller, Literature Number: SPRUGJ8C,
-+ * March 2011, Chapter 4.33 Port DMA Control Register (P0DMACR),
-+ * p.68, https://www.ti.com/lit/ug/sprugj8c/sprugj8c.pdf)
-+ * as equivalent to the following struct:
-+ *
-+ * struct AHCI_P0DMACR_t
-+ * {
-+ * unsigned TXTS : 4;
-+ * unsigned RXTS : 4;
-+ * unsigned TXABL : 4;
-+ * unsigned RXABL : 4;
-+ * unsigned Reserved : 16;
-+ * };
-+ *
-+ * TXTS: Transmit Transaction Size (TX_TRANSACTION_SIZE).
-+ * This field defines the DMA transaction size in DWORDs for
-+ * transmit (system bus read, device write) operation. [...]
-+ *
-+ * RXTS: Receive Transaction Size (RX_TRANSACTION_SIZE).
-+ * This field defines the Port DMA transaction size in DWORDs
-+ * for receive (system bus write, device read) operation. [...]
-+ *
-+ * TXABL: Transmit Burst Limit.
-+ * This field allows software to limit the VBUSP master read
-+ * burst size. [...]
-+ *
-+ * RXABL: Receive Burst Limit.
-+ * Allows software to limit the VBUSP master write burst
-+ * size. [...]
-+ *
-+ * Reserved: Reserved.
-+ *
-+ *
-+ * NOTE: According to the above document, the following alternative
-+ * to the code below could perhaps be a better option
-+ * (or preparation) for possible further improvements later:
-+ * sunxi_clrsetbits(hpriv->mmio + AHCI_P0DMACR, 0x0000ffff,
-+ * 0x00000033);
-+ */
-+ sunxi_clrsetbits(hpriv->mmio + AHCI_P0DMACR, 0x0000ffff, 0x00004433);
-
- /* Start DMA */
- sunxi_setbits(port_mmio + PORT_CMD, PORT_CMD_START);
+++ /dev/null
-From 55ec26d6a4241363fa94f15377ebd8f1116fbfd7 Mon Sep 17 00:00:00 2001
-From: Samuel Holland <samuel@sholland.org>
-Date: Sat, 12 Jan 2019 20:17:19 -0600
-Subject: [PATCH] arm64: dts: allwinner: a64: Enable A64 timer workaround
-
-As instability in the architectural timer has been observed on multiple
-devices using this SoC, inluding the Pine64 and the Orange Pi Win,
-enable the workaround in the SoC's device tree.
-
-Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
-Signed-off-by: Samuel Holland <samuel@sholland.org>
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
----
- arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
-@@ -159,6 +159,7 @@
-
- timer {
- compatible = "arm,armv8-timer";
-+ allwinner,erratum-unknown1;
- interrupts = <GIC_PPI 13
- (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
- <GIC_PPI 14
+++ /dev/null
---- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts
-@@ -98,7 +98,7 @@
-
- sw4 {
- label = "sw4";
-- linux,code = <BTN_0>;
-+ linux,code = <KEY_POWER>;
- gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
- };
- };
-@@ -238,7 +238,7 @@
- };
-
- &usb_otg {
-- dr_mode = "otg";
-+ dr_mode = "host";
- status = "okay";
- };
-
+++ /dev/null
-From 49cd9ea6dc8d68eb519ccd9f31c9730dec8a181a Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Thu, 8 Mar 2018 22:14:50 +0100
-Subject: [PATCH] Revert "ARM: dts: sun7i: Add BCM53125 switch nodes to the
- lamobo-r1 board"
-
-This reverts the changes needed for the upstream b53 DSA switch driver
-to use the OpenWrt b43 swconfig switch driver.
-
-This reverts commit 0cdefd5b5485ee6eb3512a75739d09a4090176ed.
-This reverts commit d7b9eaff5f0ca00726336b4c0c3c29decf30412a.
----
- arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts | 60 ++-----------------------------
- 1 file changed, 3 insertions(+), 57 deletions(-)
-
---- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
-@@ -124,67 +124,13 @@
- &gmac {
- pinctrl-names = "default";
- pinctrl-0 = <&gmac_pins_rgmii_a>;
-+ phy = <&phy1>;
- phy-mode = "rgmii";
- phy-supply = <®_gmac_3v3>;
- status = "okay";
-
-- fixed-link {
-- speed = <1000>;
-- full-duplex;
-- };
--
-- mdio {
-- compatible = "snps,dwmac-mdio";
-- #address-cells = <1>;
-- #size-cells = <0>;
--
-- switch: ethernet-switch@1e {
-- compatible = "brcm,bcm53125";
-- reg = <30>;
-- #address-cells = <1>;
-- #size-cells = <0>;
--
-- ports {
-- #address-cells = <1>;
-- #size-cells = <0>;
--
-- port0: port@0 {
-- reg = <0>;
-- label = "lan2";
-- };
--
-- port1: port@1 {
-- reg = <1>;
-- label = "lan3";
-- };
--
-- port2: port@2 {
-- reg = <2>;
-- label = "lan4";
-- };
--
-- port3: port@3 {
-- reg = <3>;
-- label = "wan";
-- };
--
-- port4: port@4 {
-- reg = <4>;
-- label = "lan1";
-- };
--
-- port8: port@8 {
-- reg = <8>;
-- label = "cpu";
-- ethernet = <&gmac>;
-- phy-mode = "rgmii-txid";
-- fixed-link {
-- speed = <1000>;
-- full-duplex;
-- };
-- };
-- };
-- };
-+ phy1: ethernet-phy@1 {
-+ reg = <1>;
- };
- };
-
+++ /dev/null
-From 7d87d3dafc4b1ea5659eb71ee6c5fd5308490d1f Mon Sep 17 00:00:00 2001
-From: Oskari Lemmela <oskari@lemmela.net>
-Date: Mon, 31 Dec 2018 07:44:49 +0200
-Subject: [PATCH] arm64: allwinner: a64-sopine: Add Sopine flash partitions.
-
-First 896kB to u-boot. Enough space for SPL, u-boot and ATF.
-Next 128kB to u-boot environment and rest to firmware.
-
-Firmware partition is compatible FIT image dynamic splitting.
-
-Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
----
- .../boot/dts/allwinner/sun50i-a64-sopine.dtsi | 22 +++++++++++++++++++
- 1 file changed, 22 insertions(+)
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi
-@@ -78,6 +78,28 @@
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <40000000>;
-+
-+ partitions {
-+ compatible = "fixed-partitions";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ partition@0 {
-+ label = "u-boot";
-+ reg = <0x000000 0x0E0000>;
-+ };
-+
-+ partition@e0000 {
-+ label = "u-boot-env";
-+ reg = <0x0E0000 0x020000>;
-+ };
-+
-+ partition@100000 {
-+ compatible = "denx,fit";
-+ label = "firmware";
-+ reg = <0x100000 0xF00000>;
-+ };
-+ };
- };
- };
-
+++ /dev/null
-CONFIG_AC97_BUS=y
-# CONFIG_AHCI_TEGRA is not set
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_KCOV=y
-CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
-CONFIG_ARCH_HAS_PHYS_TO_DMA=y
-CONFIG_ARCH_HAS_RESET_CONTROLLER=y
-CONFIG_ARCH_HAS_SET_MEMORY=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
-CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED=y
-CONFIG_ARCH_NR_GPIO=1024
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_FIRMWARE=y
-CONFIG_ARCH_SUPPORTS_TRUSTED_FOUNDATIONS=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_TEGRA=y
-# CONFIG_ARCH_TEGRA_114_SOC is not set
-# CONFIG_ARCH_TEGRA_124_SOC is not set
-CONFIG_ARCH_TEGRA_2x_SOC=y
-# CONFIG_ARCH_TEGRA_3x_SOC is not set
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARM=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_CRYPTO=y
-CONFIG_ARM_ERRATA_720789=y
-CONFIG_ARM_ERRATA_754327=y
-CONFIG_ARM_ERRATA_764369=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_HEAVY_MB=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-# CONFIG_ARM_LPAE is not set
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-# CONFIG_ARM_PL172_MPMC is not set
-# CONFIG_ARM_SMMU is not set
-# CONFIG_ARM_SP805_WATCHDOG is not set
-CONFIG_ARM_TEGRA20_CPUFREQ=y
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_THUMBEE=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ASN1=y
-CONFIG_ATA=y
-CONFIG_ATAGS=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BLK_DEV_BSG=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BOUNCE=y
-CONFIG_CACHE_L2X0=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CLZ_TAB=y
-CONFIG_CMA=y
-CONFIG_CMA_ALIGNMENT=8
-CONFIG_CMA_AREAS=7
-# CONFIG_CMA_DEBUG is not set
-# CONFIG_CMA_DEBUGFS is not set
-CONFIG_CMA_SIZE_MBYTES=16
-# CONFIG_CMA_SIZE_SEL_MAX is not set
-CONFIG_CMA_SIZE_SEL_MBYTES=y
-# CONFIG_CMA_SIZE_SEL_MIN is not set
-# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
-CONFIG_COMMON_CLK=y
-# CONFIG_CPUFREQ_DT is not set
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-# CONFIG_CPU_FREQ_STAT is not set
-CONFIG_CPU_HAS_ASID=y
-# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SPECTRE=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-# CONFIG_CRC32_SARWATE is not set
-CONFIG_CRC32_SLICEBY8=y
-CONFIG_CROSS_MEMORY_ATTACH=y
-CONFIG_CRYPTO_ACOMP2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_AES_ARM=y
-CONFIG_CRYPTO_AKCIPHER=y
-CONFIG_CRYPTO_AKCIPHER2=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CRYPTD=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_DRBG=y
-CONFIG_CRYPTO_DRBG_HMAC=y
-CONFIG_CRYPTO_DRBG_MENU=y
-CONFIG_CRYPTO_ECHAINIV=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_JITTERENTROPY=y
-CONFIG_CRYPTO_LZ4=y
-CONFIG_CRYPTO_LZ4HC=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_RNG_DEFAULT=y
-CONFIG_CRYPTO_RSA=y
-CONFIG_CRYPTO_SEQIV=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA1_ARM=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA256_ARM=y
-CONFIG_CRYPTO_SHA512_ARM=y
-CONFIG_CRYPTO_TWOFISH=y
-CONFIG_CRYPTO_TWOFISH_COMMON=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_ALIGN_RODATA=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DEVPORT is not set
-CONFIG_DMADEVICES=y
-CONFIG_DMA_CMA=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_DNOTIFY=y
-CONFIG_DRM=y
-CONFIG_DRM_BRIDGE=y
-CONFIG_DRM_FBDEV_EMULATION=y
-CONFIG_DRM_FBDEV_OVERALLOC=100
-CONFIG_DRM_KMS_FB_HELPER=y
-CONFIG_DRM_KMS_HELPER=y
-CONFIG_DRM_MIPI_DSI=y
-CONFIG_DRM_PANEL=y
-CONFIG_DRM_PANEL_BRIDGE=y
-CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
-CONFIG_DRM_TEGRA=y
-# CONFIG_DRM_TEGRA_DEBUG is not set
-# CONFIG_DRM_TEGRA_STAGING is not set
-# CONFIG_DRM_TVE200 is not set
-CONFIG_DTC=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_EXT4_FS=y
-CONFIG_EXTCON=y
-CONFIG_F2FS_FS=y
-CONFIG_FB=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_CMDLINE=y
-CONFIG_FB_DEFERRED_IO=y
-CONFIG_FB_SYS_COPYAREA=y
-CONFIG_FB_SYS_FILLRECT=y
-CONFIG_FB_SYS_FOPS=y
-CONFIG_FB_SYS_IMAGEBLIT=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FRAME_POINTER=y
-CONFIG_FREEZER=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_TEGRA=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_BITREVERSE=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARM_ARCH_TIMER=y
-CONFIG_HAVE_ARM_SCU=y
-CONFIG_HAVE_ARM_SMCCC=y
-CONFIG_HAVE_ARM_TWD=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
-CONFIG_HAVE_EBPF_JIT=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_RSEQ=y
-CONFIG_HAVE_SMP=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HDMI=y
-CONFIG_HID=y
-CONFIG_HIDRAW=y
-CONFIG_HID_GENERIC=y
-CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HWMON=y
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_COMPAT=y
-CONFIG_I2C_TEGRA=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=y
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_IOMMU_API=y
-# CONFIG_IOMMU_DEBUGFS is not set
-# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
-CONFIG_IOMMU_IOVA=y
-# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
-# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
-CONFIG_IOMMU_SUPPORT=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-CONFIG_KEYBOARD_ATKBD=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LZ4HC_COMPRESS=y
-CONFIG_LZ4_COMPRESS=y
-CONFIG_LZ4_DECOMPRESS=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MEMORY=y
-CONFIG_MEMORY_ISOLATION=y
-# CONFIG_MFD_NVEC is not set
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_IO_ACCESSORS=y
-# CONFIG_MMC_SDHCI_PCI is not set
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_SDHCI_TEGRA=y
-# CONFIG_MMC_TIFM_SD is not set
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MPILIB=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-# CONFIG_NEON is not set
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NLS=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NR_CPUS=4
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IOMMU=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_NET=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEASPM=y
-# CONFIG_PCIEASPM_DEBUG is not set
-CONFIG_PCIEASPM_DEFAULT=y
-# CONFIG_PCIEASPM_PERFORMANCE is not set
-# CONFIG_PCIEASPM_POWERSAVE is not set
-# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_PME=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-CONFIG_PCI_TEGRA=y
-# CONFIG_PCI_V3_SEMI is not set
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHY_TEGRA_XUSB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_TEGRA=y
-CONFIG_PINCTRL_TEGRA20=y
-CONFIG_PINCTRL_TEGRA_XUSB=y
-# CONFIG_PL310_ERRATA_588369 is not set
-CONFIG_PL310_ERRATA_727915=y
-# CONFIG_PL310_ERRATA_753970 is not set
-CONFIG_PL310_ERRATA_769419=y
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_OPP=y
-CONFIG_PM_SLEEP=y
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_GPIO=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_PWM=y
-CONFIG_PWM_SYSFS=y
-CONFIG_PWM_TEGRA=y
-CONFIG_RAS=y
-CONFIG_RATIONAL=y
-CONFIG_RCU_CPU_STALL_TIMEOUT=21
-# CONFIG_RCU_EXPERT is not set
-CONFIG_RCU_NEED_SEGCBLIST=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_REFCOUNT_FULL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_DRV_CMOS is not set
-CONFIG_RTC_DRV_TEGRA=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RTC_NVMEM=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SCSI=y
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_SERIAL_8250_FSL=y
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIAL_TEGRA=y
-CONFIG_SERIO=y
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SG_POOL=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SND=y
-# CONFIG_SND_COMPRESS_OFFLOAD is not set
-CONFIG_SND_DMAENGINE_PCM=y
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_HDA_TEGRA is not set
-CONFIG_SND_JACK=y
-CONFIG_SND_JACK_INPUT_DEV=y
-# CONFIG_SND_PCI is not set
-CONFIG_SND_PCM=y
-# CONFIG_SND_PROC_FS is not set
-CONFIG_SND_SIMPLE_CARD=y
-CONFIG_SND_SIMPLE_CARD_UTILS=y
-CONFIG_SND_SOC=y
-CONFIG_SND_SOC_AC97_BUS=y
-CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-CONFIG_SND_SOC_TEGRA=y
-CONFIG_SND_SOC_TEGRA20_AC97=y
-CONFIG_SND_SOC_TEGRA20_DAS=y
-CONFIG_SND_SOC_TEGRA20_I2S=y
-CONFIG_SND_SOC_TEGRA20_SPDIF=y
-# CONFIG_SND_SOC_TEGRA30_AHUB is not set
-# CONFIG_SND_SOC_TEGRA30_I2S is not set
-# CONFIG_SND_SOC_TEGRA_ALC5632 is not set
-# CONFIG_SND_SOC_TEGRA_MAX98090 is not set
-# CONFIG_SND_SOC_TEGRA_RT5640 is not set
-# CONFIG_SND_SOC_TEGRA_RT5677 is not set
-# CONFIG_SND_SOC_TEGRA_SGTL5000 is not set
-CONFIG_SND_SOC_TEGRA_TRIMSLICE=y
-# CONFIG_SND_SOC_TEGRA_WM8753 is not set
-# CONFIG_SND_SOC_TEGRA_WM8903 is not set
-# CONFIG_SND_SOC_TEGRA_WM9712 is not set
-CONFIG_SND_SOC_TLV320AIC23=y
-CONFIG_SND_SOC_TLV320AIC23_I2C=y
-# CONFIG_SND_USB is not set
-CONFIG_SOC_BUS=y
-CONFIG_SOC_TEGRA_FLOWCTRL=y
-CONFIG_SOC_TEGRA_FUSE=y
-CONFIG_SOC_TEGRA_PMC=y
-CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-# CONFIG_SPI_TEGRA114 is not set
-CONFIG_SPI_TEGRA20_SFLASH=y
-CONFIG_SPI_TEGRA20_SLINK=y
-CONFIG_SRCU=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYNC_FILE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_TEGRA20_APB_DMA=y
-CONFIG_TEGRA_AHB=y
-CONFIG_TEGRA_GMI=y
-CONFIG_TEGRA_HOST1X=y
-CONFIG_TEGRA_HOST1X_FIREWALL=y
-CONFIG_TEGRA_IOMMU_GART=y
-# CONFIG_TEGRA_IOMMU_SMMU is not set
-# CONFIG_TEGRA_IVC is not set
-CONFIG_TEGRA_MC=y
-CONFIG_TEGRA_TIMER=y
-CONFIG_TEGRA_WATCHDOG=y
-# CONFIG_THUMB2_KERNEL is not set
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_TRUSTED_FOUNDATIONS=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_XHCI_TEGRA is not set
-# CONFIG_USB_EHCI_HCD_PLATFORM is not set
-CONFIG_USB_EHCI_TEGRA=y
-CONFIG_USB_HID=y
-CONFIG_USB_HIDDEV=y
-CONFIG_USB_PHY=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_TEGRA_PHY=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_ULPI_VIEWPORT=y
-# CONFIG_USERIO is not set
-CONFIG_USE_OF=y
-# CONFIG_VFIO is not set
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
+++ /dev/null
-From patchwork Fri Jul 13 11:32:42 2018
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: serial8250 on tegra hsuart: recover from spurious interrupts due to
- tegra2 silicon bug
-X-Patchwork-Submitter: "David R. Piegdon" <lkml@p23q.org>
-X-Patchwork-Id: 943440
-Message-Id: <4676ea34-69ce-5422-1ded-94218b89f7d9@p23q.org>
-To: linux-tegra@vger.kernel.org
-Date: Fri, 13 Jul 2018 11:32:42 +0000
-From: "David R. Piegdon" <lkml@p23q.org>
-List-Id: <linux-tegra.vger.kernel.org>
-
-Hi,
-a while back I sent a few mails regarding spurious interrupts in the
-UARTA (hsuart) block of the Tegra2 SoC, when using the 8250 driver for
-it instead of the hsuart driver. After going down a pretty deep
-debugging/testing hole, I think I found a patch that fixes the issue. So
-far testing in a reboot-cycle suggests that the error frequency dropped
-from >3% of all reboots to at least <0.05% of all reboots. Tests
-continue to run over the weekend.
-
-The patch below already is a second iteration; the first did not reset
-the MCR or contain the lines below '// clear interrupts'. This resulted
-in no more spurious interrupts, but in a few % of spurious interrupts
-that were recovered the UART block did not receive any characters any
-more. So further resetting was required to fully reacquire operational
-state of the UART block.
-
-I'd love any comments/suggestions on this!
-
-Cheers,
-
-David
-
---- a/drivers/tty/serial/8250/8250_core.c
-+++ b/drivers/tty/serial/8250/8250_core.c
-@@ -136,6 +136,38 @@ static irqreturn_t serial8250_interrupt(
- "serial8250: too much work for irq%d\n", irq);
- break;
- }
-+
-+#ifdef CONFIG_ARCH_TEGRA_2x_SOC
-+ if (!handled && (port->type == PORT_TEGRA)) {
-+ /*
-+ * Fix Tegra 2 CPU silicon bug where sometimes
-+ * "TX holding register empty" interrupts result in a
-+ * bad (metastable?) state in Tegras HSUART IP core.
-+ * Only way to recover seems to be to reset all
-+ * interrupts as well as the TX queue and the MCR.
-+ * But we don't want to loose any outgoing characters,
-+ * so only do it if the RX and TX queues are empty.
-+ */
-+ unsigned char lsr = port->serial_in(port, UART_LSR);
-+ const unsigned char fifo_empty_mask =
-+ (UART_LSR_TEMT | UART_LSR_THRE);
-+ if (((lsr & (UART_LSR_DR | fifo_empty_mask)) ==
-+ fifo_empty_mask)) {
-+ port->serial_out(port, UART_IER, 0);
-+ port->serial_out(port, UART_MCR, 0);
-+ serial8250_clear_and_reinit_fifos(up);
-+ port->serial_out(port, UART_MCR, up->mcr);
-+ port->serial_out(port, UART_IER, up->ier);
-+ // clear interrupts
-+ serial_port_in(port, UART_LSR);
-+ serial_port_in(port, UART_RX);
-+ serial_port_in(port, UART_IIR);
-+ serial_port_in(port, UART_MSR);
-+ up->lsr_saved_flags = 0;
-+ up->msr_saved_flags = 0;
-+ }
-+ }
-+#endif
- } while (l != end);
-
- spin_unlock(&i->lock);
+++ /dev/null
---- a/arch/arm/boot/dts/tegra20-trimslice.dts
-+++ b/arch/arm/boot/dts/tegra20-trimslice.dts
-@@ -200,16 +200,17 @@
- conf_ata {
- nvidia,pins = "ata", "atc", "atd", "ate",
- "crtp", "dap2", "dap3", "dap4", "dta",
-- "dtb", "dtc", "dtd", "dte", "gmb",
-- "gme", "i2cp", "pta", "slxc", "slxd",
-- "spdi", "spdo", "uda";
-+ "dtb", "dtc", "dtd", "gmb", "gme",
-+ "i2cp", "pta", "slxc", "slxd", "spdi",
-+ "spdo", "uda";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- nvidia,tristate = <TEGRA_PIN_ENABLE>;
- };
- conf_atb {
- nvidia,pins = "atb", "cdev1", "cdev2", "dap1",
-- "gma", "gmc", "gmd", "gpu", "gpu7",
-- "gpv", "sdio1", "slxa", "slxk", "uac";
-+ "dte", "gma", "gmc", "gmd", "gpu",
-+ "gpu7", "gpv", "sdio1", "slxa", "slxk",
-+ "uac";
- nvidia,pull = <TEGRA_PIN_PULL_NONE>;
- nvidia,tristate = <TEGRA_PIN_DISABLE>;
- };
-@@ -402,6 +403,20 @@
- };
- };
-
-+ gpio-leds {
-+ compatible = "gpio-leds";
-+
-+ ds2 {
-+ label = "trimslice:green:right";
-+ gpios = <&gpio TEGRA_GPIO(D, 2) GPIO_ACTIVE_LOW>;
-+ };
-+
-+ ds3 {
-+ label = "trimslice:green:left";
-+ gpios = <&gpio TEGRA_GPIO(BB, 5) GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+
- poweroff {
- compatible = "gpio-poweroff";
- gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
+++ /dev/null
-CONFIG_64BIT=y
-CONFIG_ACPI=y
-CONFIG_ACPI_AC=y
-CONFIG_ACPI_BATTERY=y
-# CONFIG_ACPI_BGRT is not set
-CONFIG_ACPI_BUTTON=y
-# CONFIG_ACPI_CMPC is not set
-CONFIG_ACPI_CONTAINER=y
-CONFIG_ACPI_CPPC_LIB=y
-CONFIG_ACPI_CPU_FREQ_PSS=y
-# CONFIG_ACPI_DEBUG is not set
-# CONFIG_ACPI_DEBUGGER is not set
-# CONFIG_ACPI_DOCK is not set
-# CONFIG_ACPI_EC_DEBUGFS is not set
-CONFIG_ACPI_FAN=y
-CONFIG_ACPI_HOTPLUG_CPU=y
-CONFIG_ACPI_HOTPLUG_IOAPIC=y
-# CONFIG_ACPI_I2C_OPREGION is not set
-CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
-CONFIG_ACPI_LPIT=y
-# CONFIG_ACPI_PCI_SLOT is not set
-CONFIG_ACPI_PROCESSOR=y
-# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
-CONFIG_ACPI_PROCESSOR_CSTATE=y
-CONFIG_ACPI_PROCESSOR_IDLE=y
-# CONFIG_ACPI_PROCFS_POWER is not set
-CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
-# CONFIG_ACPI_SBS is not set
-CONFIG_ACPI_SPCR_TABLE=y
-CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
-# CONFIG_ACPI_TAD is not set
-CONFIG_ACPI_THERMAL=y
-CONFIG_ACPI_VIDEO=y
-# CONFIG_ACPI_WMI is not set
-CONFIG_AGP=y
-# CONFIG_AGP_ALI is not set
-# CONFIG_AGP_AMD is not set
-# CONFIG_AGP_AMD64 is not set
-# CONFIG_AGP_ATI is not set
-# CONFIG_AGP_EFFICEON is not set
-CONFIG_AGP_INTEL=y
-# CONFIG_AGP_NVIDIA is not set
-# CONFIG_AGP_SIS is not set
-# CONFIG_AGP_SWORKS is not set
-# CONFIG_AGP_VIA is not set
-# CONFIG_APM is not set
-CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
-CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
-CONFIG_ARCH_HAS_ADD_PAGES=y
-CONFIG_ARCH_HAS_KCOV=y
-CONFIG_ARCH_HAS_PMEM_API=y
-CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
-CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
-CONFIG_ARCH_HAS_UACCESS_MCSAFE=y
-CONFIG_ARCH_HAS_ZONE_DEVICE=y
-CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
-CONFIG_ARCH_MMAP_RND_BITS=28
-CONFIG_ARCH_MMAP_RND_BITS_MAX=32
-CONFIG_ARCH_MMAP_RND_BITS_MIN=28
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_SUPPORTS_INT128=y
-CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANTS_THP_SWAP=y
-CONFIG_AUDIT_ARCH=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BALLOON_COMPACTION=y
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_BLK_DEV_INTEGRITY=y
-CONFIG_BLK_DEV_NVME=y
-CONFIG_NVME_MULTIPATH=y
-CONFIG_BLK_MQ_VIRTIO=y
-# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
-CONFIG_BTT=y
-CONFIG_CDROM=y
-# CONFIG_CALGARY_IOMMU is not set
-# CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT is not set
-CONFIG_CONNECTOR=y
-# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
-CONFIG_CPU_RMAP=y
-# CONFIG_CHASH_STATS is not set
-# CONFIG_CHASH_SELFTEST is not set
-CONFIG_CRC_T10DIF=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_AES_NI_INTEL=y
-CONFIG_CRYPTO_AES_X86_64=y
-# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
-# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set
-# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set
-# CONFIG_CRYPTO_CAMELLIA_X86_64 is not set
-# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
-# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
-# CONFIG_CRYPTO_CHACHA20_X86_64 is not set
-CONFIG_CRYPTO_CRCT10DIF=y
-# CONFIG_CRYPTO_CRCT10DIF_PCLMUL is not set
-CONFIG_CRYPTO_CRYPTD=y
-# CONFIG_CRYPTO_DES3_EDE_X86_64 is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_GF128MUL=y
-CONFIG_CRYPTO_GLUE_HELPER_X86=y
-CONFIG_CRYPTO_LRW=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL2=y
-# CONFIG_CRYPTO_POLY1305_X86_64 is not set
-# CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set
-# CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set
-# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
-# CONFIG_CRYPTO_SHA1_MB is not set
-# CONFIG_CRYPTO_SHA1_SSSE3 is not set
-# CONFIG_CRYPTO_SHA256_MB is not set
-# CONFIG_CRYPTO_SHA256_SSSE3 is not set
-# CONFIG_CRYPTO_SHA512_MB is not set
-# CONFIG_CRYPTO_SHA512_SSSE3 is not set
-CONFIG_CRYPTO_SIMD=y
-# CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set
-# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
-# CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set
-CONFIG_CRYPTO_XTS=y
-# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
-# CONFIG_DPTF_POWER is not set
-CONFIG_DRM=y
-# CONFIG_DRM_AMDGPU is not set
-# CONFIG_DRM_AMDGPU_CIK is not set
-# CONFIG_DRM_AMDGPU_GART_DEBUGFS is not set
-# CONFIG_DRM_AMDGPU_SI is not set
-# CONFIG_DRM_AMDGPU_USERPTR is not set
-# CONFIG_DRM_AMD_ACP is not set
-# CONFIG_DRM_AMD_DC is not set
-CONFIG_DRM_BOCHS=y
-CONFIG_DRM_BRIDGE=y
-# CONFIG_DRM_DEBUG_SELFTEST is not set
-CONFIG_DRM_FBDEV_EMULATION=y
-CONFIG_DRM_FBDEV_OVERALLOC=100
-# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set
-# CONFIG_DRM_GMA500 is not set
-# CONFIG_DRM_I2C_NXP_TDA9950 is not set
-CONFIG_DRM_I915=y
-# CONFIG_DRM_I915_ALPHA_SUPPORT is not set
-CONFIG_DRM_I915_CAPTURE_ERROR=y
-CONFIG_DRM_I915_COMPRESS_ERROR=y
-# CONFIG_DRM_I915_DEBUG is not set
-# CONFIG_DRM_I915_DEBUG_GUC is not set
-# CONFIG_DRM_I915_DEBUG_VBLANK_EVADE is not set
-CONFIG_DRM_I915_GVT=y
-# CONFIG_DRM_I915_LOW_LEVEL_TRACEPOINTS is not set
-# CONFIG_DRM_I915_SELFTEST is not set
-# CONFIG_DRM_I915_SW_FENCE_CHECK_DAG is not set
-# CONFIG_DRM_I915_SW_FENCE_DEBUG_OBJECTS is not set
-CONFIG_DRM_I915_USERPTR=y
-# CONFIG_DRM_I915_WERROR is not set
-CONFIG_DRM_KMS_FB_HELPER=y
-CONFIG_DRM_KMS_HELPER=y
-CONFIG_DRM_MIPI_DSI=y
-CONFIG_DRM_PANEL=y
-CONFIG_DRM_PANEL_BRIDGE=y
-CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
-# CONFIG_DRM_RADEON is not set
-# CONFIG_DRM_RADEON_USERPTR is not set
-CONFIG_DRM_SCHED=y
-CONFIG_DRM_TTM=y
-CONFIG_DRM_VIRTIO_GPU=y
-# CONFIG_HSA_AMD is not set
-# CONFIG_DRM_VKMS is not set
-# CONFIG_DRM_VMWGFX is not set
-CONFIG_EARLY_PRINTK_EFI=y
-CONFIG_EFI=y
-CONFIG_EFIVAR_FS=m
-# CONFIG_EFI_CAPSULE_LOADER is not set
-CONFIG_EFI_ESRT=y
-# CONFIG_EFI_FAKE_MEMMAP is not set
-# CONFIG_EFI_MIXED is not set
-# CONFIG_EFI_PGT_DUMP is not set
-CONFIG_EFI_RUNTIME_MAP=y
-CONFIG_EFI_RUNTIME_WRAPPERS=y
-CONFIG_EFI_STUB=y
-# CONFIG_EFI_TEST is not set
-# CONFIG_EFI_VARS is not set
-CONFIG_FAILOVER=y
-CONFIG_FB=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_CMDLINE=y
-CONFIG_FB_DEFERRED_IO=y
-CONFIG_FB_EFI=y
-CONFIG_FB_HYPERV=y
-# CONFIG_FB_I810 is not set
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_SIMPLE=y
-CONFIG_FB_SYS_COPYAREA=y
-CONFIG_FB_SYS_FILLRECT=y
-CONFIG_FB_SYS_FOPS=y
-CONFIG_FB_SYS_IMAGEBLIT=y
-CONFIG_FB_TILEBLITTING=y
-# CONFIG_FB_VESA is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x16=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_SUPPORT=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FREEZER=y
-CONFIG_GART_IOMMU=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CPU=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_ACPI=y
-CONFIG_GPIO_ICH=y
-# CONFIG_GPIO_IT87 is not set
-CONFIG_GPIO_LYNXPOINT=y
-CONFIG_GPIO_SCH=y
-CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
-CONFIG_HAVE_ACPI_APEI=y
-CONFIG_HAVE_ACPI_APEI_NMI=y
-CONFIG_HAVE_ARCH_HUGE_VMAP=y
-CONFIG_HAVE_ARCH_KASAN=y
-CONFIG_HAVE_ARCH_SOFT_DIRTY=y
-CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
-CONFIG_HAVE_ARCH_VMAP_STACK=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_FENTRY=y
-CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
-CONFIG_HAVE_LIVEPATCH=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_HAVE_RCU_TABLE_FREE=y
-CONFIG_HAVE_RCU_TABLE_INVALIDATE=y
-CONFIG_HAVE_RELIABLE_STACKTRACE=y
-CONFIG_HAVE_STACK_VALIDATION=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HDMI=y
-CONFIG_HIBERNATE_CALLBACKS=y
-CONFIG_HID_BATTERY_STRENGTH=y
-CONFIG_HID_GENERIC=y
-CONFIG_HID_HYPERV_MOUSE=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_HOTPLUG_PCI_ACPI=y
-# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-# CONFIG_HOTPLUG_PCI_PCIE is not set
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-CONFIG_HOTPLUG_SMT=y
-CONFIG_HPET=y
-CONFIG_HPET_MMAP=y
-# CONFIG_HP_ACCEL is not set
-CONFIG_HVC_DRIVER=y
-CONFIG_HVC_IRQ=y
-CONFIG_HVC_XEN=y
-CONFIG_HVC_XEN_FRONTEND=y
-CONFIG_HWMON=y
-CONFIG_HWMON_VID=y
-CONFIG_HW_RANDOM_AMD=y
-CONFIG_HW_RANDOM_INTEL=y
-CONFIG_HW_RANDOM_VIRTIO=y
-CONFIG_HYPERV=y
-CONFIG_HYPERVISOR_GUEST=y
-CONFIG_HYPERV_BALLOON=y
-CONFIG_HYPERV_KEYBOARD=y
-CONFIG_HYPERV_NET=y
-CONFIG_HYPERV_STORAGE=y
-CONFIG_HYPERV_TSCPAGE=y
-CONFIG_HYPERV_UTILS=y
-# CONFIG_HYPERV_VSOCKETS is not set
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_MULTI_INSTANTIATE is not set
-# CONFIG_IA32_EMULATION is not set
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y
-CONFIG_INTEL_GTT=y
-CONFIG_INTEL_IDLE=y
-# CONFIG_INTEL_INT0002_VGPIO is not set
-# CONFIG_INTEL_IPS is not set
-# CONFIG_INTEL_MENLOW is not set
-# CONFIG_INTEL_MIC_BUS is not set
-CONFIG_INTEL_PCH_THERMAL=y
-# CONFIG_INTEL_PMC_IPC is not set
-CONFIG_INTEL_SOC_DTS_IOSF_CORE=y
-CONFIG_INTEL_SOC_DTS_THERMAL=y
-# CONFIG_INTEL_TURBO_MAX_3 is not set
-# CONFIG_IOMMU_DEBUG is not set
-CONFIG_IOMMU_HELPER=y
-CONFIG_IOSF_MBI=y
-# CONFIG_IOSF_MBI_DEBUG is not set
-# CONFIG_ISCSI_IBFT is not set
-# CONFIG_ISCSI_IBFT_FIND is not set
-CONFIG_ISO9660_FS=y
-CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
-# CONFIG_KVM_DEBUG_FS is not set
-CONFIG_KVM_GUEST=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_LEDS_GPIO=y
-# CONFIG_LEGACY_VSYSCALL_EMULATE is not set
-CONFIG_LEGACY_VSYSCALL_NONE=y
-CONFIG_LIBNVDIMM=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LPC_ICH=y
-CONFIG_LPC_SCH=y
-CONFIG_MAILBOX=y
-# CONFIG_MAXSMP is not set
-CONFIG_MEMORY_BALLOON=y
-# CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_INTEL_LPSS_ACPI is not set
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_CQHCI=y
-CONFIG_MMC_RICOH_MMC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PCI=y
-# CONFIG_MMC_SDHCI_PLTFM is not set
-# CONFIG_MMC_TIFM_SD is not set
-# CONFIG_MMC_WBSD is not set
-CONFIG_MMU_NOTIFIER=y
-CONFIG_MODULES_USE_ELF_RELA=y
-# CONFIG_MPSC is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_ND_BLK=y
-CONFIG_ND_BTT=y
-CONFIG_ND_CLAIM=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NET_FAILOVER=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NR_CPUS=8
-CONFIG_NR_CPUS_DEFAULT=64
-CONFIG_NR_CPUS_RANGE_BEGIN=2
-CONFIG_NR_CPUS_RANGE_END=512
-# CONFIG_NUMA is not set
-CONFIG_OUTPUT_FORMAT="elf64-x86-64"
-CONFIG_PADATA=y
-CONFIG_PAGE_TABLE_ISOLATION=y
-CONFIG_PARAVIRT=y
-CONFIG_PARAVIRT_CLOCK=y
-# CONFIG_PARAVIRT_DEBUG is not set
-CONFIG_PARAVIRT_SPINLOCKS=y
-CONFIG_PATA_AMD=y
-CONFIG_PATA_ATIIXP=y
-CONFIG_PATA_MPIIX=y
-CONFIG_PATA_OLDPIIX=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_PATA_VIA=y
-CONFIG_PCC=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_PME=y
-CONFIG_PCI_HYPERV=y
-# CONFIG_PCI_MMCONFIG is not set
-CONFIG_PCI_XEN=y
-CONFIG_PGTABLE_LEVELS=4
-CONFIG_PHYSICAL_ALIGN=0x1000000
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PINCTRL=y
-# CONFIG_PINCTRL_BAYTRAIL is not set
-# CONFIG_PINCTRL_BROXTON is not set
-# CONFIG_PINCTRL_CANNONLAKE is not set
-# CONFIG_PINCTRL_CHERRYVIEW is not set
-# CONFIG_PINCTRL_DENVERTON is not set
-# CONFIG_PINCTRL_GEMINILAKE is not set
-# CONFIG_PINCTRL_LEWISBURG is not set
-# CONFIG_PINCTRL_SUNRISEPOINT is not set
-CONFIG_PM=y
-# CONFIG_PMIC_OPREGION is not set
-CONFIG_PM_CLK=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_PNP=y
-CONFIG_PNPACPI=y
-CONFIG_PNP_DEBUG_MESSAGES=y
-CONFIG_PROC_EVENTS=y
-# CONFIG_PVPANIC is not set
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-# CONFIG_RANDOMIZE_BASE is not set
-CONFIG_RAS=y
-CONFIG_RCU_NEED_SEGCBLIST=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_RELOCATABLE=y
-CONFIG_RESET_ATTACK_MITIGATION=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-# CONFIG_SAMSUNG_Q10 is not set
-CONFIG_SATA_AHCI=y
-CONFIG_SCHED_MC=y
-CONFIG_SCHED_MC_PRIO=y
-CONFIG_SCHED_SMT=y
-# CONFIG_SCIF_BUS is not set
-CONFIG_SCSI_VIRTIO=y
-CONFIG_SENSORS_CORETEMP=y
-CONFIG_SENSORS_FAM15H_POWER=y
-CONFIG_SENSORS_I5500=y
-CONFIG_SENSORS_K10TEMP=y
-CONFIG_SENSORS_K8TEMP=y
-CONFIG_SENSORS_VIA_CPUTEMP=y
-CONFIG_SERIAL_8250_PNP=y
-CONFIG_SMP=y
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_MANUAL=y
-# CONFIG_SPARSEMEM_VMEMMAP is not set
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_STACK_VALIDATION=y
-# CONFIG_SURFACE_PRO3_BUTTON is not set
-CONFIG_SWIOTLB=y
-CONFIG_SWIOTLB_XEN=y
-CONFIG_SYS_HYPERVISOR=y
-CONFIG_THERMAL_GOV_USER_SPACE=y
-CONFIG_THERMAL_HWMON=y
-CONFIG_THERMAL_WRITABLE_TRIPS=y
-# CONFIG_TOSHIBA_BT_RFKILL is not set
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UCS2_STRING=y
-# CONFIG_UNWINDER_ORC is not set
-CONFIG_USB_STORAGE=y
-CONFIG_VGACON_SOFT_SCROLLBACK=y
-# CONFIG_VGACON_SOFT_SCROLLBACK_PERSISTENT_ENABLE_BY_DEFAULT is not set
-CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
-CONFIG_VIRTIO=y
-CONFIG_VIRTIO_BALLOON=y
-CONFIG_VIRTIO_BLK=y
-CONFIG_VIRTIO_CONSOLE=y
-CONFIG_VIRTIO_MMIO=y
-# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
-CONFIG_VIRTIO_NET=y
-CONFIG_VIRTIO_PCI=y
-CONFIG_VIRTIO_PCI_LEGACY=y
-# CONFIG_VIRTIO_VSOCKETS is not set
-CONFIG_VIRT_DRIVERS=y
-CONFIG_VMAP_STACK=y
-# CONFIG_VMD is not set
-CONFIG_VMWARE_BALLOON=y
-CONFIG_VMWARE_PVSCSI=y
-CONFIG_VMWARE_VMCI=y
-CONFIG_VMWARE_VMCI_VSOCKETS=y
-CONFIG_VMXNET3=y
-CONFIG_VSOCKETS=y
-CONFIG_VT_CONSOLE_SLEEP=y
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_X86_5LEVEL is not set
-CONFIG_X86_64=y
-CONFIG_X86_64_SMP=y
-CONFIG_X86_ACPI_CPUFREQ=y
-# CONFIG_X86_ACPI_CPUFREQ_CPB is not set
-CONFIG_X86_AMD_FREQ_SENSITIVITY=y
-# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
-CONFIG_X86_CMOV=y
-CONFIG_X86_CPUID=y
-CONFIG_X86_DEBUGCTLMSR=y
-CONFIG_X86_DEV_DMA_OPS=y
-CONFIG_X86_DIRECT_GBPAGES=y
-CONFIG_X86_INTEL_LPSS=y
-# CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS is not set
-# CONFIG_X86_INTEL_MPX is not set
-CONFIG_X86_INTEL_PSTATE=y
-CONFIG_X86_MINIMUM_CPU_FAMILY=64
-# CONFIG_X86_PCC_CPUFREQ is not set
-CONFIG_X86_PKG_TEMP_THERMAL=y
-# CONFIG_X86_PMEM_LEGACY is not set
-CONFIG_X86_PM_TIMER=y
-# CONFIG_X86_POWERNOW_K8 is not set
-# CONFIG_X86_VSYSCALL_EMULATION is not set
-CONFIG_X86_X2APIC=y
-# CONFIG_X86_X32 is not set
-CONFIG_XEN=y
-CONFIG_XENFS=y
-CONFIG_XEN_512GB=y
-CONFIG_XEN_ACPI=y
-CONFIG_XEN_ACPI_PROCESSOR=y
-CONFIG_XEN_AUTO_XLATE=y
-# CONFIG_XEN_BACKEND is not set
-CONFIG_XEN_BALLOON=y
-CONFIG_XEN_BLKDEV_FRONTEND=y
-CONFIG_XEN_COMPAT_XENFS=y
-CONFIG_XEN_DEBUG_FS=y
-CONFIG_XEN_DEV_EVTCHN=y
-CONFIG_XEN_DOM0=y
-CONFIG_XEN_EFI=y
-CONFIG_XEN_FBDEV_FRONTEND=y
-CONFIG_XEN_GNTDEV=y
-CONFIG_XEN_GRANT_DEV_ALLOC=y
-CONFIG_XEN_HAVE_PVMMU=y
-CONFIG_XEN_HAVE_VPMU=y
-# CONFIG_XEN_MCE_LOG is not set
-CONFIG_XEN_NETDEV_FRONTEND=y
-CONFIG_XEN_PCIDEV_FRONTEND=y
-CONFIG_XEN_PRIVCMD=y
-CONFIG_XEN_PV=y
-CONFIG_XEN_PVH=y
-CONFIG_XEN_PVHVM=y
-CONFIG_XEN_PVHVM_SMP=y
-CONFIG_XEN_PV_SMP=y
-CONFIG_XEN_SAVE_RESTORE=y
-CONFIG_XEN_SCSI_FRONTEND=y
-CONFIG_XEN_SYMS=y
-CONFIG_XEN_SYS_HYPERVISOR=y
-CONFIG_XEN_WDT=y
-CONFIG_XEN_XENBUS_FRONTEND=y
-CONFIG_XPS=y
-CONFIG_ZONE_DMA32=y
+++ /dev/null
-# CONFIG_60XX_WDT is not set
-# CONFIG_64BIT is not set
-# CONFIG_ACPI is not set
-# CONFIG_ACQUIRE_WDT is not set
-# CONFIG_ADVANTECH_WDT is not set
-# CONFIG_ALIM1535_WDT is not set
-# CONFIG_ALIX is not set
-CONFIG_AMD_NB=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
-CONFIG_ARCH_HAS_CPU_RELAX=y
-CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
-CONFIG_ARCH_HAS_FILTER_PGPROT=y
-CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
-CONFIG_ARCH_HAS_MEM_ENCRYPT=y
-CONFIG_ARCH_HAS_PTE_SPECIAL=y
-CONFIG_ARCH_HAS_REFCOUNT=y
-CONFIG_ARCH_HAS_SET_MEMORY=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
-CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
-CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
-CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
-CONFIG_ARCH_RANDOM=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUPPORTS_ACPI=y
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USES_PG_UNCACHED=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
-CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
-CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
-CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ATA=y
-CONFIG_ATA_GENERIC=y
-CONFIG_ATA_PIIX=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BOUNCE=y
-CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
-CONFIG_CLKBLD_I8253=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKEVT_I8253=y
-CONFIG_CLKSRC_I8253=y
-CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
-CONFIG_CLOCKSOURCE_WATCHDOG=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMPAT_32=y
-# CONFIG_COMPAT_VDSO is not set
-CONFIG_CONSOLE_TRANSLATIONS=y
-# CONFIG_CPU5_WDT is not set
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_SUP_AMD=y
-CONFIG_CPU_SUP_CENTAUR=y
-CONFIG_CPU_SUP_CYRIX_32=y
-CONFIG_CPU_SUP_INTEL=y
-CONFIG_CPU_SUP_TRANSMETA_32=y
-CONFIG_CPU_SUP_UMC_32=y
-# CONFIG_CRASHLOG is not set
-CONFIG_CRASH_CORE=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_AES_586=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_CRC32_PCLMUL is not set
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-# CONFIG_CRYPTO_SERPENT_SSE2_586 is not set
-CONFIG_CRYPTO_WORKQUEUE=y
-# CONFIG_CX_ECAT is not set
-CONFIG_DCACHE_WORD_ACCESS=y
-# CONFIG_DCDBAS is not set
-# CONFIG_DEBUG_BOOT_PARAMS is not set
-# CONFIG_DEBUG_ENTRY is not set
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_DEBUG_NMI_SELFTEST is not set
-# CONFIG_DEBUG_TLBFLUSH is not set
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DEFAULT_IO_DELAY_TYPE=0
-# CONFIG_DELL_RBU is not set
-CONFIG_DMA_DIRECT_OPS=y
-CONFIG_DMI=y
-CONFIG_DMIID=y
-CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
-CONFIG_DMI_SYSFS=y
-CONFIG_DNOTIFY=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_EARLY_PRINTK=y
-# CONFIG_EARLY_PRINTK_DBGP is not set
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-# CONFIG_EDD is not set
-# CONFIG_EUROTECH_WDT is not set
-CONFIG_EXT4_FS=y
-CONFIG_F2FS_FS=y
-# CONFIG_F71808E_WDT is not set
-CONFIG_FIRMWARE_MEMMAP=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FRAME_POINTER=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FUSION=y
-# CONFIG_FUSION_CTL is not set
-# CONFIG_FUSION_LOGGING is not set
-CONFIG_FUSION_MAX_SGE=128
-CONFIG_FUSION_SPI=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_FIND_FIRST_BIT=y
-CONFIG_GENERIC_IOMAP=y
-CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
-CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-# CONFIG_GEOS is not set
-CONFIG_GLOB=y
-# CONFIG_HANGCHECK_TIMER is not set
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
-CONFIG_HAVE_AOUT=y
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
-CONFIG_HAVE_ATOMIC_IOMAP=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CMPXCHG_DOUBLE=y
-CONFIG_HAVE_CMPXCHG_LOCAL=y
-CONFIG_HAVE_COPY_THREAD_TLS=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
-CONFIG_HAVE_EBPF_JIT=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_GUP=y
-CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KPROBES_ON_FTRACE=y
-CONFIG_HAVE_KVM=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
-CONFIG_HAVE_MMIOTRACE_SUPPORT=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PCSPKR_PLATFORM=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_EVENTS_NMI=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_RSEQ=y
-CONFIG_HAVE_SETUP_PER_CPU_AREA=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
-CONFIG_HAVE_USER_RETURN_NOTIFIER=y
-CONFIG_HID=y
-CONFIG_HIGHMEM=y
-CONFIG_HIGHMEM4G=y
-# CONFIG_HIGHPTE is not set
-CONFIG_HPET_EMULATE_RTC=y
-CONFIG_HPET_TIMER=y
-# CONFIG_HP_WATCHDOG is not set
-# CONFIG_HUGETLBFS is not set
-CONFIG_HW_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_GEODE=y
-CONFIG_HW_RANDOM_VIA=y
-# CONFIG_HYPERVISOR_GUEST is not set
-CONFIG_HZ_PERIODIC=y
-CONFIG_I8253_LOCK=y
-# CONFIG_I8K is not set
-# CONFIG_IB700_WDT is not set
-# CONFIG_IBMASR is not set
-# CONFIG_IBM_RTL is not set
-# CONFIG_IE6XX_WDT is not set
-CONFIG_ILLEGAL_POINTER_VALUE=0
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=y
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_INSTRUCTION_DECODER=y
-# CONFIG_INTEL_PCH_THERMAL is not set
-# CONFIG_INTEL_POWERCLAMP is not set
-# CONFIG_INTEL_RDT is not set
-# CONFIG_IOSF_MBI is not set
-CONFIG_IO_DELAY_0X80=y
-# CONFIG_IO_DELAY_0XED is not set
-# CONFIG_IO_DELAY_NONE is not set
-CONFIG_IO_DELAY_TYPE_0X80=0
-CONFIG_IO_DELAY_TYPE_0XED=1
-CONFIG_IO_DELAY_TYPE_NONE=3
-CONFIG_IO_DELAY_TYPE_UDELAY=2
-# CONFIG_IO_DELAY_UDELAY is not set
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-# CONFIG_ISA is not set
-CONFIG_ISA_DMA_API=y
-# CONFIG_IT8712F_WDT is not set
-# CONFIG_IT87_WDT is not set
-# CONFIG_ITCO_WDT is not set
-CONFIG_JBD2=y
-CONFIG_KALLSYMS=y
-CONFIG_KEXEC=y
-CONFIG_KEXEC_CORE=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_LEDS_CLEVO_MAIL is not set
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-# CONFIG_M486 is not set
-# CONFIG_M586 is not set
-CONFIG_M586MMX=y
-# CONFIG_M586TSC is not set
-# CONFIG_M686 is not set
-# CONFIG_MACHZ_WDT is not set
-# CONFIG_MATOM is not set
-# CONFIG_MCORE2 is not set
-# CONFIG_MCRUSOE is not set
-# CONFIG_MCYRIXIII is not set
-# CONFIG_MEFFICEON is not set
-# CONFIG_MELAN is not set
-CONFIG_MEMFD_CREATE=y
-# CONFIG_MFD_INTEL_LPSS_PCI is not set
-# CONFIG_MGEODEGX1 is not set
-# CONFIG_MGEODE_LX is not set
-CONFIG_MICROCODE=y
-CONFIG_MICROCODE_AMD=y
-CONFIG_MICROCODE_INTEL=y
-CONFIG_MICROCODE_OLD_INTERFACE=y
-CONFIG_MIGRATION=y
-# CONFIG_MK6 is not set
-# CONFIG_MK7 is not set
-# CONFIG_MK8 is not set
-# CONFIG_MODIFY_LDT_SYSCALL is not set
-CONFIG_MODULES_TREE_LOOKUP=y
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MPENTIUM4 is not set
-# CONFIG_MPENTIUMII is not set
-# CONFIG_MPENTIUMIII is not set
-# CONFIG_MPENTIUMM is not set
-# CONFIG_MTD is not set
-CONFIG_MTRR=y
-# CONFIG_MTRR_SANITIZER is not set
-# CONFIG_MVIAC3_2 is not set
-# CONFIG_MVIAC7 is not set
-# CONFIG_MWINCHIP3D is not set
-# CONFIG_MWINCHIPC6 is not set
-CONFIG_NAMESPACES=y
-CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-# CONFIG_NET5501 is not set
-# CONFIG_NET_NS is not set
-CONFIG_NLS=y
-# CONFIG_NOHIGHMEM is not set
-CONFIG_NO_BOOTMEM=y
-CONFIG_NR_CPUS=1
-CONFIG_NR_CPUS_DEFAULT=1
-CONFIG_NR_CPUS_RANGE_BEGIN=1
-CONFIG_NR_CPUS_RANGE_END=1
-# CONFIG_NSC_GPIO is not set
-CONFIG_NVRAM=y
-# CONFIG_OF is not set
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-# CONFIG_OLPC is not set
-CONFIG_OPROFILE_NMI_TIMER=y
-CONFIG_OUTPUT_FORMAT="elf32-i386"
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PC104=y
-# CONFIG_PC8736x_GPIO is not set
-# CONFIG_PC87413_WDT is not set
-CONFIG_PCI=y
-CONFIG_PCI_BIOS=y
-CONFIG_PCI_DIRECT=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_GOANY=y
-# CONFIG_PCI_GOBIOS is not set
-# CONFIG_PCI_GODIRECT is not set
-# CONFIG_PCI_GOMMCONFIG is not set
-CONFIG_PCI_IOV=y
-CONFIG_PCI_LABEL=y
-CONFIG_PCI_LOCKLESS_CONFIG=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-CONFIG_PCSPKR_PLATFORM=y
-CONFIG_PERF_EVENTS=y
-CONFIG_PERF_EVENTS_INTEL_CSTATE=y
-CONFIG_PERF_EVENTS_INTEL_RAPL=y
-CONFIG_PERF_EVENTS_INTEL_UNCORE=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYSICAL_ALIGN=0x100000
-CONFIG_PHYSICAL_START=0x1000000
-CONFIG_PMC_ATOM=y
-CONFIG_POWER_SUPPLY=y
-# CONFIG_PROCESSOR_SELECT is not set
-CONFIG_PROC_PAGE_MONITOR=y
-# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
-# CONFIG_PUNIT_ATOM_DEBUG is not set
-CONFIG_RATIONAL=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_GZIP=y
-CONFIG_RETPOLINE=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_MC146818_LIB=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_SBC7240_WDT is not set
-# CONFIG_SBC8360_WDT is not set
-# CONFIG_SBC_EPX_C3_WATCHDOG is not set
-# CONFIG_SC1200_WDT is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCx200=y
-CONFIG_SCx200HR_TIMER=y
-# CONFIG_SCx200_GPIO is not set
-# CONFIG_SCx200_WDT is not set
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SG_POOL=y
-# CONFIG_SMSC37B787_WDT is not set
-# CONFIG_SMSC_SCH311X_WDT is not set
-CONFIG_SPARSEMEM_STATIC=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SRCU=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-# CONFIG_TELCLOCK is not set
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TINY_SRCU=y
-# CONFIG_TOSHIBA is not set
-CONFIG_UNWINDER_FRAME_POINTER=y
-# CONFIG_UNWINDER_GUESS is not set
-CONFIG_UP_LATE_INIT=y
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_HCD_PLATFORM is not set
-CONFIG_USB_EHCI_PCI=y
-CONFIG_USB_HID=y
-CONFIG_USB_HIDDEV=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PCI=y
-# CONFIG_USB_OHCI_HCD_PLATFORM is not set
-CONFIG_USB_PCI=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_UHCI_HCD=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_PCI=y
-# CONFIG_USB_XHCI_PLATFORM is not set
-# CONFIG_USERIO is not set
-# CONFIG_USER_NS is not set
-CONFIG_USER_STACKTRACE_SUPPORT=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VIA_WDT is not set
-# CONFIG_VMWARE_VMCI is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_WAFER_WDT is not set
-CONFIG_X86=y
-CONFIG_X86_32=y
-# CONFIG_X86_32_IRIS is not set
-CONFIG_X86_32_LAZY_GS=y
-CONFIG_X86_ALIGNMENT_16=y
-# CONFIG_X86_ANCIENT_MCE is not set
-# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
-CONFIG_X86_CMPXCHG64=y
-# CONFIG_X86_CPUFREQ_NFORCE2 is not set
-# CONFIG_X86_CPUID is not set
-# CONFIG_X86_DEBUG_FPU is not set
-# CONFIG_X86_DECODER_SELFTEST is not set
-# CONFIG_X86_EXTENDED_PLATFORM is not set
-CONFIG_X86_F00F_BUG=y
-CONFIG_X86_FEATURE_NAMES=y
-CONFIG_X86_GENERIC=y
-# CONFIG_X86_GX_SUSPMOD is not set
-# CONFIG_X86_INTEL_MPX is not set
-# CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS is not set
-# CONFIG_X86_INTEL_PSTATE is not set
-CONFIG_X86_INTEL_TSX_MODE_OFF=y
-# CONFIG_X86_INTEL_TSX_MODE_ON is not set
-# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set
-CONFIG_X86_INTEL_UMIP=y
-CONFIG_X86_INTEL_USERCOPY=y
-CONFIG_X86_INTERNODE_CACHE_SHIFT=6
-CONFIG_X86_IO_APIC=y
-CONFIG_X86_L1_CACHE_SHIFT=6
-# CONFIG_X86_LEGACY_VM86 is not set
-CONFIG_X86_LOCAL_APIC=y
-# CONFIG_X86_LONGRUN is not set
-CONFIG_X86_MCE=y
-# CONFIG_X86_MCELOG_LEGACY is not set
-CONFIG_X86_MCE_AMD=y
-# CONFIG_X86_MCE_INJECT is not set
-CONFIG_X86_MCE_INTEL=y
-CONFIG_X86_MCE_THRESHOLD=y
-CONFIG_X86_MINIMUM_CPU_FAMILY=5
-CONFIG_X86_MPPARSE=y
-CONFIG_X86_MSR=y
-# CONFIG_X86_P4_CLOCKMOD is not set
-CONFIG_X86_PAT=y
-CONFIG_X86_PLATFORM_DEVICES=y
-# CONFIG_X86_POWERNOW_K6 is not set
-# CONFIG_X86_POWERNOW_K7 is not set
-# CONFIG_X86_PTDUMP is not set
-# CONFIG_X86_REBOOTFIXUPS is not set
-CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
-CONFIG_X86_RESERVE_LOW=64
-CONFIG_X86_SMAP=y
-# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
-# CONFIG_X86_SPEEDSTEP_ICH is not set
-# CONFIG_X86_SPEEDSTEP_SMI is not set
-CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
-CONFIG_X86_THERMAL_VECTOR=y
-CONFIG_X86_TSC=y
-CONFIG_X86_UP_APIC=y
-CONFIG_X86_UP_IOAPIC=y
-CONFIG_X86_VERBOSE_BOOTUP=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_XZ_DEC_X86=y
-CONFIG_ZLIB_INFLATE=y
+++ /dev/null
-# CONFIG_3C515 is not set
-CONFIG_ACPI=y
-CONFIG_ACPI_AC=y
-CONFIG_ACPI_BATTERY=y
-# CONFIG_ACPI_BGRT is not set
-CONFIG_ACPI_BUTTON=y
-# CONFIG_ACPI_CMPC is not set
-CONFIG_ACPI_CONTAINER=y
-CONFIG_ACPI_CPU_FREQ_PSS=y
-# CONFIG_ACPI_DEBUG is not set
-# CONFIG_ACPI_DEBUGGER is not set
-# CONFIG_ACPI_DOCK is not set
-# CONFIG_ACPI_EC_DEBUGFS is not set
-# CONFIG_ACPI_FAN is not set
-CONFIG_ACPI_HOTPLUG_CPU=y
-CONFIG_ACPI_HOTPLUG_IOAPIC=y
-# CONFIG_ACPI_I2C_OPREGION is not set
-CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
-# CONFIG_ACPI_PCI_SLOT is not set
-CONFIG_ACPI_PROCESSOR=y
-# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
-CONFIG_ACPI_PROCESSOR_CSTATE=y
-CONFIG_ACPI_PROCESSOR_IDLE=y
-# CONFIG_ACPI_PROCFS_POWER is not set
-CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
-# CONFIG_ACPI_SBS is not set
-CONFIG_ACPI_SPCR_TABLE=y
-CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
-CONFIG_ACPI_TAD=y
-CONFIG_ACPI_THERMAL=y
-CONFIG_ACPI_VIDEO=y
-# CONFIG_ACPI_WMI is not set
-CONFIG_AGP=y
-# CONFIG_AGP_ALI is not set
-# CONFIG_AGP_AMD is not set
-# CONFIG_AGP_AMD64 is not set
-# CONFIG_AGP_ATI is not set
-# CONFIG_AGP_EFFICEON is not set
-CONFIG_AGP_INTEL=y
-# CONFIG_AGP_NVIDIA is not set
-# CONFIG_AGP_SIS is not set
-# CONFIG_AGP_SWORKS is not set
-# CONFIG_AGP_VIA is not set
-# CONFIG_APM is not set
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
-CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
-CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BALLOON_COMPACTION=y
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_BLK_MQ_VIRTIO=y
-# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
-CONFIG_BTT=y
-CONFIG_CDROM=y
-CONFIG_CHASH=y
-# CONFIG_CHASH_SELFTEST is not set
-# CONFIG_CHASH_STATS is not set
-CONFIG_CONNECTOR=y
-# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CPU_RMAP=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL2=y
-# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
-CONFIG_DMA_SHARED_BUFFER=y
-# CONFIG_DPTF_POWER is not set
-CONFIG_DRM=y
-# CONFIG_DRM_AMDGPU is not set
-# CONFIG_DRM_AMDGPU_CIK is not set
-# CONFIG_DRM_AMDGPU_GART_DEBUGFS is not set
-# CONFIG_DRM_AMDGPU_SI is not set
-# CONFIG_DRM_AMDGPU_USERPTR is not set
-# CONFIG_DRM_AMD_ACP is not set
-# CONFIG_DRM_AMD_DC is not set
-CONFIG_DRM_BOCHS=y
-CONFIG_DRM_BRIDGE=y
-# CONFIG_DRM_DEBUG_SELFTEST is not set
-CONFIG_DRM_FBDEV_EMULATION=y
-CONFIG_DRM_FBDEV_OVERALLOC=100
-# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set
-# CONFIG_DRM_GMA500 is not set
-# CONFIG_DRM_I2C_NXP_TDA9950 is not set
-CONFIG_DRM_I915=y
-# CONFIG_DRM_I915_ALPHA_SUPPORT is not set
-CONFIG_DRM_I915_CAPTURE_ERROR=y
-CONFIG_DRM_I915_COMPRESS_ERROR=y
-# CONFIG_DRM_I915_DEBUG is not set
-# CONFIG_DRM_I915_DEBUG_GUC is not set
-# CONFIG_DRM_I915_DEBUG_VBLANK_EVADE is not set
-# CONFIG_DRM_I915_LOW_LEVEL_TRACEPOINTS is not set
-# CONFIG_DRM_I915_SELFTEST is not set
-# CONFIG_DRM_I915_SW_FENCE_CHECK_DAG is not set
-# CONFIG_DRM_I915_SW_FENCE_DEBUG_OBJECTS is not set
-CONFIG_DRM_I915_USERPTR=y
-# CONFIG_DRM_I915_WERROR is not set
-CONFIG_DRM_KMS_FB_HELPER=y
-CONFIG_DRM_KMS_HELPER=y
-CONFIG_DRM_MIPI_DSI=y
-CONFIG_DRM_PANEL=y
-CONFIG_DRM_PANEL_BRIDGE=y
-CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
-# CONFIG_DRM_RADEON is not set
-# CONFIG_DRM_RADEON_USERPTR is not set
-CONFIG_DRM_SCHED=y
-CONFIG_DRM_TTM=y
-CONFIG_DRM_VIRTIO_GPU=y
-# CONFIG_DRM_VKMS is not set
-# CONFIG_DRM_VMWGFX is not set
-CONFIG_EARLY_PRINTK_EFI=y
-CONFIG_EFI=y
-CONFIG_EFIVAR_FS=m
-# CONFIG_EFI_BOOTLOADER_CONTROL is not set
-# CONFIG_EFI_CAPSULE_LOADER is not set
-# CONFIG_EFI_CAPSULE_QUIRK_QUARK_CSH is not set
-CONFIG_EFI_ESRT=y
-# CONFIG_EFI_FAKE_MEMMAP is not set
-# CONFIG_EFI_PGT_DUMP is not set
-CONFIG_EFI_RUNTIME_MAP=y
-CONFIG_EFI_RUNTIME_WRAPPERS=y
-CONFIG_EFI_STUB=y
-# CONFIG_EFI_TEST is not set
-CONFIG_EFI_VARS=y
-# CONFIG_EISA is not set
-# CONFIG_EL3 is not set
-CONFIG_FAILOVER=y
-CONFIG_FB=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_CMDLINE=y
-CONFIG_FB_DEFERRED_IO=y
-CONFIG_FB_EFI=y
-CONFIG_FB_HYPERV=y
-# CONFIG_FB_I810 is not set
-CONFIG_FB_SIMPLE=y
-CONFIG_FB_SYS_COPYAREA=y
-CONFIG_FB_SYS_FILLRECT=y
-CONFIG_FB_SYS_FOPS=y
-CONFIG_FB_SYS_IMAGEBLIT=y
-# CONFIG_FB_VESA is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x16=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_SUPPORT=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FREEZER=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_ACPI=y
-CONFIG_HAVE_ACPI_APEI=y
-CONFIG_HAVE_ACPI_APEI_NMI=y
-CONFIG_HAVE_ARCH_HUGE_VMAP=y
-CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
-CONFIG_HAVE_KVM_EVENTFD=y
-CONFIG_HAVE_KVM_IRQCHIP=y
-CONFIG_HAVE_KVM_IRQFD=y
-CONFIG_HAVE_KVM_IRQ_BYPASS=y
-CONFIG_HAVE_KVM_IRQ_ROUTING=y
-CONFIG_HAVE_KVM_MSI=y
-CONFIG_HAVE_RCU_TABLE_FREE=y
-CONFIG_HAVE_RCU_TABLE_INVALIDATE=y
-CONFIG_HDMI=y
-CONFIG_HIBERNATE_CALLBACKS=y
-CONFIG_HID_BATTERY_STRENGTH=y
-CONFIG_HID_GENERIC=y
-CONFIG_HID_HYPERV_MOUSE=y
-# CONFIG_HIGHMEM4G is not set
-CONFIG_HIGHMEM64G=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_HOTPLUG_PCI_ACPI=y
-# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
-# CONFIG_HOTPLUG_PCI_COMPAQ is not set
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-# CONFIG_HOTPLUG_PCI_IBM is not set
-CONFIG_HOTPLUG_PCI_PCIE=y
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-CONFIG_HOTPLUG_SMT=y
-CONFIG_HPET=y
-CONFIG_HPET_MMAP=y
-# CONFIG_HP_ACCEL is not set
-CONFIG_HVC_DRIVER=y
-CONFIG_HVC_IRQ=y
-CONFIG_HVC_XEN=y
-CONFIG_HVC_XEN_FRONTEND=y
-CONFIG_HWMON=y
-CONFIG_HWMON_VID=y
-CONFIG_HW_RANDOM_VIRTIO=y
-CONFIG_HYPERV=y
-CONFIG_HYPERVISOR_GUEST=y
-CONFIG_HYPERV_BALLOON=y
-CONFIG_HYPERV_KEYBOARD=y
-CONFIG_HYPERV_NET=y
-CONFIG_HYPERV_STORAGE=y
-CONFIG_HYPERV_UTILS=y
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_MULTI_INSTANTIATE is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y
-CONFIG_INTEL_GTT=y
-CONFIG_INTEL_IDLE=y
-# CONFIG_INTEL_INT0002_VGPIO is not set
-# CONFIG_INTEL_IPS is not set
-# CONFIG_INTEL_MENLOW is not set
-CONFIG_INTEL_PCH_THERMAL=y
-# CONFIG_INTEL_PMC_IPC is not set
-CONFIG_INTEL_SOC_DTS_IOSF_CORE=y
-CONFIG_INTEL_SOC_DTS_THERMAL=y
-CONFIG_INTERVAL_TREE=y
-CONFIG_IOSF_MBI=y
-# CONFIG_IOSF_MBI_DEBUG is not set
-CONFIG_IRQ_BYPASS_MANAGER=y
-CONFIG_ISA=y
-CONFIG_ISAPNP=y
-CONFIG_ISA_BUS_API=y
-# CONFIG_ISCSI_IBFT is not set
-# CONFIG_ISCSI_IBFT_FIND is not set
-CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-CONFIG_KVM=y
-CONFIG_KVM_AMD=y
-CONFIG_KVM_ASYNC_PF=y
-# CONFIG_KVM_DEBUG_FS is not set
-CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
-CONFIG_KVM_GUEST=y
-CONFIG_KVM_INTEL=y
-CONFIG_KVM_MMIO=y
-CONFIG_KVM_VFIO=y
-# CONFIG_LANCE is not set
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_LIBNVDIMM=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-# CONFIG_M586MMX is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_MEMORY_BALLOON=y
-CONFIG_MFD_CORE=y
-CONFIG_MFD_INTEL_LPSS=y
-CONFIG_MFD_INTEL_LPSS_ACPI=y
-# CONFIG_MIXCOMWD is not set
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_CQHCI=y
-CONFIG_MMC_RICOH_MMC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PCI=y
-# CONFIG_MMC_SDHCI_PLTFM is not set
-# CONFIG_MMC_TIFM_SD is not set
-# CONFIG_MMC_WBSD is not set
-CONFIG_MMU_NOTIFIER=y
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_CYAPA is not set
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-# CONFIG_MOUSE_PS2_BYD is not set
-# CONFIG_MOUSE_PS2_CYPRESS is not set
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SMBUS=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_VMMOUSE is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-CONFIG_MPENTIUM4=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_ND_BLK=y
-CONFIG_ND_BTT=y
-CONFIG_ND_CLAIM=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NET_FAILOVER=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NO_HZ=y
-CONFIG_NR_CPUS=4
-CONFIG_NR_CPUS_DEFAULT=8
-CONFIG_NR_CPUS_RANGE_BEGIN=2
-CONFIG_NR_CPUS_RANGE_END=8
-CONFIG_PADATA=y
-CONFIG_PAGE_TABLE_ISOLATION=y
-CONFIG_PARAVIRT=y
-CONFIG_PARAVIRT_CLOCK=y
-# CONFIG_PARAVIRT_DEBUG is not set
-CONFIG_PARAVIRT_SPINLOCKS=y
-CONFIG_PATA_AMD=y
-CONFIG_PATA_ATIIXP=y
-CONFIG_PATA_MPIIX=y
-CONFIG_PATA_OLDPIIX=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_PATA_SC1200=y
-CONFIG_PATA_VIA=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_PME=y
-CONFIG_PCI_MMCONFIG=y
-CONFIG_PCI_XEN=y
-# CONFIG_PCWATCHDOG is not set
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_BAYTRAIL=y
-CONFIG_PINCTRL_BROXTON=y
-CONFIG_PINCTRL_CANNONLAKE=y
-CONFIG_PINCTRL_CHERRYVIEW=y
-CONFIG_PINCTRL_DENVERTON=y
-CONFIG_PINCTRL_GEMINILAKE=y
-CONFIG_PINCTRL_INTEL=y
-# CONFIG_PINCTRL_LEWISBURG is not set
-CONFIG_PINCTRL_SUNRISEPOINT=y
-CONFIG_PM=y
-# CONFIG_PMIC_OPREGION is not set
-CONFIG_PM_CLK=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_PNP=y
-CONFIG_PNPACPI=y
-# CONFIG_PNPBIOS is not set
-CONFIG_PNP_DEBUG_MESSAGES=y
-CONFIG_PREEMPT_NOTIFIERS=y
-CONFIG_PROC_EVENTS=y
-# CONFIG_PVPANIC is not set
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-# CONFIG_RANDOMIZE_BASE is not set
-CONFIG_RAS=y
-CONFIG_RCU_NEED_SEGCBLIST=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_RELAY=y
-CONFIG_RELOCATABLE=y
-CONFIG_RESET_ATTACK_MITIGATION=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-# CONFIG_SAMSUNG_Q10 is not set
-CONFIG_SATA_AHCI=y
-CONFIG_SATA_VIA=y
-CONFIG_SCHED_INFO=y
-CONFIG_SCHED_SMT=y
-CONFIG_SCSI_VIRTIO=y
-CONFIG_SENSORS_CORETEMP=y
-CONFIG_SENSORS_FAM15H_POWER=y
-CONFIG_SENSORS_I5500=y
-CONFIG_SENSORS_K10TEMP=y
-CONFIG_SENSORS_K8TEMP=y
-CONFIG_SENSORS_VIA_CPUTEMP=y
-CONFIG_SERIAL_8250_PNP=y
-CONFIG_SMP=y
-# CONFIG_SURFACE_PRO3_BUTTON is not set
-CONFIG_SWIOTLB=y
-CONFIG_SWIOTLB_XEN=y
-CONFIG_SYNC_FILE=y
-CONFIG_SYS_HYPERVISOR=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_THERMAL_GOV_USER_SPACE=y
-CONFIG_THERMAL_HWMON=y
-CONFIG_THERMAL_WRITABLE_TRIPS=y
-# CONFIG_TOSHIBA_BT_RFKILL is not set
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UCS2_STRING=y
-CONFIG_USB_STORAGE=y
-CONFIG_USER_RETURN_NOTIFIER=y
-CONFIG_VGACON_SOFT_SCROLLBACK=y
-# CONFIG_VGACON_SOFT_SCROLLBACK_PERSISTENT_ENABLE_BY_DEFAULT is not set
-CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
-CONFIG_VHOST=y
-CONFIG_VHOST_NET=y
-CONFIG_VIRTIO=y
-CONFIG_VIRTIO_BALLOON=y
-CONFIG_VIRTIO_BLK=y
-CONFIG_VIRTIO_CONSOLE=y
-CONFIG_VIRTIO_INPUT=y
-CONFIG_VIRTIO_MMIO=y
-# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
-CONFIG_VIRTIO_NET=y
-CONFIG_VIRTIO_PCI=y
-CONFIG_VIRTIO_PCI_LEGACY=y
-CONFIG_VIRTUALIZATION=y
-CONFIG_VT_CONSOLE_SLEEP=y
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_WDT is not set
-CONFIG_X86_32_SMP=y
-CONFIG_X86_ACPI_CPUFREQ=y
-# CONFIG_X86_ACPI_CPUFREQ_CPB is not set
-CONFIG_X86_AMD_FREQ_SENSITIVITY=y
-# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
-# CONFIG_X86_BIGSMP is not set
-CONFIG_X86_CMOV=y
-CONFIG_X86_CPUID=y
-CONFIG_X86_DEBUGCTLMSR=y
-# CONFIG_X86_E_POWERSAVER is not set
-CONFIG_X86_INTEL_LPSS=y
-CONFIG_X86_INTEL_PSTATE=y
-CONFIG_X86_INTERNODE_CACHE_SHIFT=7
-CONFIG_X86_L1_CACHE_SHIFT=7
-# CONFIG_X86_LONGHAUL is not set
-CONFIG_X86_MINIMUM_CPU_FAMILY=6
-CONFIG_X86_NEED_RELOCS=y
-CONFIG_X86_PAE=y
-# CONFIG_X86_PCC_CPUFREQ is not set
-CONFIG_X86_PKG_TEMP_THERMAL=y
-# CONFIG_X86_PMEM_LEGACY is not set
-CONFIG_X86_PM_TIMER=y
-# CONFIG_X86_POWERNOW_K8 is not set
-CONFIG_X86_USE_PPRO_CHECKSUM=y
-CONFIG_XEN=y
-CONFIG_XENFS=y
-CONFIG_XEN_ACPI=y
-CONFIG_XEN_ACPI_PROCESSOR=y
-CONFIG_XEN_AUTO_XLATE=y
-# CONFIG_XEN_BACKEND is not set
-CONFIG_XEN_BALLOON=y
-CONFIG_XEN_BLKDEV_FRONTEND=y
-CONFIG_XEN_COMPAT_XENFS=y
-CONFIG_XEN_DEBUG_FS=y
-CONFIG_XEN_DEV_EVTCHN=y
-CONFIG_XEN_DOM0=y
-CONFIG_XEN_FBDEV_FRONTEND=y
-CONFIG_XEN_GNTDEV=y
-CONFIG_XEN_GRANT_DEV_ALLOC=y
-CONFIG_XEN_HAVE_PVMMU=y
-CONFIG_XEN_HAVE_VPMU=y
-CONFIG_XEN_NETDEV_FRONTEND=y
-CONFIG_XEN_PCIDEV_FRONTEND=y
-CONFIG_XEN_PRIVCMD=y
-CONFIG_XEN_PV=y
-CONFIG_XEN_PVH=y
-CONFIG_XEN_PVHVM=y
-CONFIG_XEN_PVHVM_SMP=y
-CONFIG_XEN_PV_SMP=y
-CONFIG_XEN_SAVE_RESTORE=y
-CONFIG_XEN_SCSI_FRONTEND=y
-CONFIG_XEN_SYMS=y
-CONFIG_XEN_SYS_HYPERVISOR=y
-CONFIG_XEN_WDT=y
-CONFIG_XEN_XENBUS_FRONTEND=y
-CONFIG_XPS=y
-CONFIG_ZLIB_DEFLATE=y
+++ /dev/null
-# CONFIG_3C515 is not set
-CONFIG_8139CP=y
-CONFIG_8139TOO=y
-CONFIG_8139TOO_8129=y
-CONFIG_8139TOO_PIO=y
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139_OLD_RX_RESET is not set
-CONFIG_ACPI=y
-CONFIG_ACPI_AC=y
-# CONFIG_ACPI_BATTERY is not set
-# CONFIG_ACPI_CMPC is not set
-# CONFIG_ACPI_CONTAINER is not set
-CONFIG_ACPI_CPU_FREQ_PSS=y
-# CONFIG_ACPI_DEBUG is not set
-# CONFIG_ACPI_DEBUGGER is not set
-# CONFIG_ACPI_DOCK is not set
-# CONFIG_ACPI_EC_DEBUGFS is not set
-CONFIG_ACPI_FAN=y
-CONFIG_ACPI_HOTPLUG_IOAPIC=y
-CONFIG_ACPI_I2C_OPREGION=y
-CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
-# CONFIG_ACPI_PCI_SLOT is not set
-CONFIG_ACPI_PROCESSOR=y
-# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
-CONFIG_ACPI_PROCESSOR_CSTATE=y
-CONFIG_ACPI_PROCESSOR_IDLE=y
-# CONFIG_ACPI_PROCFS_POWER is not set
-CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
-# CONFIG_ACPI_SBS is not set
-CONFIG_ACPI_SPCR_TABLE=y
-CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
-CONFIG_ACPI_THERMAL=y
-# CONFIG_ACPI_WMI is not set
-CONFIG_ALIX=y
-CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
-CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
-# CONFIG_ATA_PIIX is not set
-CONFIG_CS5535_CLOCK_EVENT_SRC=y
-CONFIG_CS5535_MFGPT=y
-CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7
-# CONFIG_DPTF_POWER is not set
-# CONFIG_EISA is not set
-# CONFIG_EL3 is not set
-CONFIG_GEODE_WDT=y
-CONFIG_GEOS=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_ACPI=y
-CONFIG_GPIO_CS5535=y
-CONFIG_HAVE_ACPI_APEI=y
-CONFIG_HAVE_ACPI_APEI_NMI=y
-# CONFIG_HPET is not set
-# CONFIG_HP_ACCEL is not set
-CONFIG_HWMON=y
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_ALGOPCA=y
-CONFIG_I2C_ALGOPCF=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_MULTI_INSTANTIATE is not set
-# CONFIG_INTEL_INT0002_VGPIO is not set
-# CONFIG_INTEL_IPS is not set
-# CONFIG_INTEL_MENLOW is not set
-# CONFIG_INTEL_PMC_IPC is not set
-# CONFIG_INTEL_SOC_DTS_THERMAL is not set
-CONFIG_IOSF_MBI=y
-# CONFIG_IOSF_MBI_DEBUG is not set
-CONFIG_ISA=y
-# CONFIG_ISAPNP is not set
-CONFIG_ISA_BUS_API=y
-# CONFIG_ISCSI_IBFT is not set
-# CONFIG_ISCSI_IBFT_FIND is not set
-# CONFIG_LANCE is not set
-CONFIG_LEDS_GPIO=y
-# CONFIG_M586MMX is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_MFD_CORE=y
-CONFIG_MFD_CS5535=y
-# CONFIG_MFD_INTEL_LPSS_ACPI is not set
-CONFIG_MGEODEGX1=y
-# CONFIG_MIXCOMWD is not set
-CONFIG_NATSEMI=y
-CONFIG_NET5501=y
-CONFIG_NSC_GPIO=y
-CONFIG_PATA_CS5520=y
-CONFIG_PATA_CS5530=y
-CONFIG_PATA_CS5535=y
-CONFIG_PATA_CS5536=y
-CONFIG_PATA_SC1200=y
-CONFIG_PC8736x_GPIO=y
-CONFIG_PCI_MMCONFIG=y
-# CONFIG_PCWATCHDOG is not set
-CONFIG_PINCTRL=y
-# CONFIG_PINCTRL_BAYTRAIL is not set
-# CONFIG_PINCTRL_BROXTON is not set
-# CONFIG_PINCTRL_CANNONLAKE is not set
-# CONFIG_PINCTRL_CHERRYVIEW is not set
-# CONFIG_PINCTRL_DENVERTON is not set
-# CONFIG_PINCTRL_GEMINILAKE is not set
-# CONFIG_PINCTRL_LEWISBURG is not set
-# CONFIG_PINCTRL_SUNRISEPOINT is not set
-# CONFIG_PMIC_OPREGION is not set
-CONFIG_PNP=y
-CONFIG_PNPACPI=y
-# CONFIG_PNPBIOS is not set
-CONFIG_PNP_DEBUG_MESSAGES=y
-# CONFIG_PVPANIC is not set
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_RTC_I2C_AND_SPI=y
-# CONFIG_SAMSUNG_Q10 is not set
-CONFIG_SC1200_WDT=y
-CONFIG_SCx200_ACB=y
-CONFIG_SCx200_WDT=y
-CONFIG_SENSORS_LM90=y
-CONFIG_SERIAL_8250_PNP=y
-# CONFIG_SURFACE_PRO3_BUTTON is not set
-# CONFIG_TOSHIBA_BT_RFKILL is not set
-# CONFIG_USB_UHCI_HCD is not set
-CONFIG_VGACON_SOFT_SCROLLBACK=y
-# CONFIG_VGACON_SOFT_SCROLLBACK_PERSISTENT_ENABLE_BY_DEFAULT is not set
-CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
-CONFIG_VIA_RHINE=y
-CONFIG_VIA_RHINE_MMIO=y
-# CONFIG_WDT is not set
-# CONFIG_X86_ACPI_CPUFREQ is not set
-# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
-CONFIG_X86_CPUID=y
-CONFIG_X86_DEBUGCTLMSR=y
-# CONFIG_X86_E_POWERSAVER is not set
-CONFIG_X86_INTEL_LPSS=y
-# CONFIG_X86_LONGHAUL is not set
-# CONFIG_X86_MCE is not set
-# CONFIG_X86_PCC_CPUFREQ is not set
-CONFIG_X86_PM_TIMER=y
-CONFIG_X86_REBOOTFIXUPS=y
+++ /dev/null
-# CONFIG_3C515 is not set
-CONFIG_ACPI=y
-CONFIG_ACPI_AC=y
-CONFIG_ACPI_BATTERY=y
-CONFIG_ACPI_BUTTON=y
-# CONFIG_ACPI_CMPC is not set
-# CONFIG_ACPI_CONTAINER is not set
-CONFIG_ACPI_CPU_FREQ_PSS=y
-# CONFIG_ACPI_DEBUG is not set
-# CONFIG_ACPI_DEBUGGER is not set
-# CONFIG_ACPI_DOCK is not set
-# CONFIG_ACPI_EC_DEBUGFS is not set
-# CONFIG_ACPI_FAN is not set
-CONFIG_ACPI_HOTPLUG_IOAPIC=y
-# CONFIG_ACPI_I2C_OPREGION is not set
-CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
-# CONFIG_ACPI_PCI_SLOT is not set
-CONFIG_ACPI_PROCESSOR=y
-# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
-CONFIG_ACPI_PROCESSOR_CSTATE=y
-CONFIG_ACPI_PROCESSOR_IDLE=y
-# CONFIG_ACPI_PROCFS_POWER is not set
-CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
-# CONFIG_ACPI_SBS is not set
-CONFIG_ACPI_SPCR_TABLE=y
-CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
-CONFIG_ACPI_THERMAL=y
-CONFIG_ACPI_VIDEO=y
-# CONFIG_ACPI_WMI is not set
-CONFIG_AGP=y
-# CONFIG_AGP_ALI is not set
-# CONFIG_AGP_AMD is not set
-# CONFIG_AGP_AMD64 is not set
-# CONFIG_AGP_ATI is not set
-# CONFIG_AGP_EFFICEON is not set
-CONFIG_AGP_INTEL=y
-# CONFIG_AGP_NVIDIA is not set
-# CONFIG_AGP_SIS is not set
-# CONFIG_AGP_SWORKS is not set
-# CONFIG_AGP_VIA is not set
-CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
-CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GENERIC=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CDROM=y
-CONFIG_CHASH=y
-# CONFIG_CHASH_SELFTEST is not set
-# CONFIG_CHASH_STATS is not set
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_DMA_SHARED_BUFFER=y
-# CONFIG_DPTF_POWER is not set
-CONFIG_DRM=y
-CONFIG_DRM_AMDGPU=y
-# CONFIG_DRM_AMDGPU_CIK is not set
-# CONFIG_DRM_AMDGPU_GART_DEBUGFS is not set
-# CONFIG_DRM_AMDGPU_SI is not set
-# CONFIG_DRM_AMDGPU_USERPTR is not set
-# CONFIG_DRM_AMD_ACP is not set
-# CONFIG_DRM_AMD_DC is not set
-CONFIG_DRM_BOCHS=y
-CONFIG_DRM_BRIDGE=y
-# CONFIG_DRM_DEBUG_SELFTEST is not set
-CONFIG_DRM_FBDEV_EMULATION=y
-CONFIG_DRM_FBDEV_OVERALLOC=100
-# CONFIG_DRM_GMA500 is not set
-# CONFIG_DRM_I2C_NXP_TDA9950 is not set
-CONFIG_DRM_I915=y
-# CONFIG_DRM_I915_ALPHA_SUPPORT is not set
-CONFIG_DRM_I915_CAPTURE_ERROR=y
-CONFIG_DRM_I915_COMPRESS_ERROR=y
-# CONFIG_DRM_I915_DEBUG is not set
-# CONFIG_DRM_I915_DEBUG_GUC is not set
-# CONFIG_DRM_I915_DEBUG_VBLANK_EVADE is not set
-# CONFIG_DRM_I915_LOW_LEVEL_TRACEPOINTS is not set
-# CONFIG_DRM_I915_SELFTEST is not set
-# CONFIG_DRM_I915_SW_FENCE_CHECK_DAG is not set
-# CONFIG_DRM_I915_SW_FENCE_DEBUG_OBJECTS is not set
-CONFIG_DRM_I915_USERPTR=y
-# CONFIG_DRM_I915_WERROR is not set
-CONFIG_DRM_KMS_FB_HELPER=y
-CONFIG_DRM_KMS_HELPER=y
-CONFIG_DRM_MIPI_DSI=y
-CONFIG_DRM_PANEL=y
-CONFIG_DRM_PANEL_BRIDGE=y
-CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
-CONFIG_DRM_RADEON=y
-# CONFIG_DRM_RADEON_USERPTR is not set
-CONFIG_DRM_SCHED=y
-CONFIG_DRM_TTM=y
-# CONFIG_DRM_VKMS is not set
-# CONFIG_DRM_VMWGFX is not set
-# CONFIG_EISA is not set
-# CONFIG_EL3 is not set
-CONFIG_FB=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_CMDLINE=y
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_I810 is not set
-CONFIG_FB_SYS_COPYAREA=y
-CONFIG_FB_SYS_FILLRECT=y
-CONFIG_FB_SYS_FOPS=y
-CONFIG_FB_SYS_IMAGEBLIT=y
-# CONFIG_FB_VESA is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x16=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_SUPPORT=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_HAVE_ACPI_APEI=y
-CONFIG_HAVE_ACPI_APEI_NMI=y
-CONFIG_HDMI=y
-CONFIG_HID_BATTERY_STRENGTH=y
-# CONFIG_HIGHMEM4G is not set
-CONFIG_HPET=y
-CONFIG_HPET_MMAP=y
-# CONFIG_HP_ACCEL is not set
-CONFIG_HWMON=y
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_MULTI_INSTANTIATE is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_INTEL_GTT=y
-CONFIG_INTEL_IDLE=y
-# CONFIG_INTEL_IPS is not set
-# CONFIG_INTEL_MENLOW is not set
-# CONFIG_INTEL_PMC_IPC is not set
-# CONFIG_INTEL_SOC_DTS_THERMAL is not set
-CONFIG_INTERVAL_TREE=y
-CONFIG_IOSF_MBI=y
-# CONFIG_IOSF_MBI_DEBUG is not set
-CONFIG_ISA=y
-CONFIG_ISAPNP=y
-CONFIG_ISA_BUS_API=y
-# CONFIG_ISCSI_IBFT is not set
-# CONFIG_ISCSI_IBFT_FIND is not set
-CONFIG_ISO9660_FS=y
-# CONFIG_JOLIET is not set
-# CONFIG_LANCE is not set
-# CONFIG_LCD_CLASS_DEVICE is not set
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_MFD_CORE=y
-CONFIG_MFD_INTEL_LPSS=y
-CONFIG_MFD_INTEL_LPSS_ACPI=y
-# CONFIG_MIXCOMWD is not set
-CONFIG_MMU_NOTIFIER=y
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_CYAPA is not set
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-# CONFIG_MOUSE_PS2_BYD is not set
-# CONFIG_MOUSE_PS2_CYPRESS is not set
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-CONFIG_MOUSE_PS2_LIFEBOOK=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SMBUS=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-CONFIG_NOHIGHMEM=y
-CONFIG_NO_HZ=y
-CONFIG_PATA_AMD=y
-CONFIG_PATA_ATIIXP=y
-CONFIG_PATA_LEGACY=y
-CONFIG_PATA_MPIIX=y
-CONFIG_PATA_OLDPIIX=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_PATA_SC1200=y
-CONFIG_PATA_VIA=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCI_MMCONFIG=y
-# CONFIG_PCWATCHDOG is not set
-# CONFIG_PMIC_OPREGION is not set
-CONFIG_PNP=y
-CONFIG_PNPACPI=y
-# CONFIG_PNPBIOS is not set
-CONFIG_PNP_DEBUG_MESSAGES=y
-# CONFIG_PVPANIC is not set
-CONFIG_RAS=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_RELAY=y
-CONFIG_RTC_I2C_AND_SPI=y
-# CONFIG_SAMSUNG_Q10 is not set
-CONFIG_SATA_AHCI=y
-CONFIG_SERIAL_8250_PNP=y
-# CONFIG_SURFACE_PRO3_BUTTON is not set
-CONFIG_SYNC_FILE=y
-# CONFIG_TOSHIBA_BT_RFKILL is not set
-CONFIG_USB_STORAGE=y
-CONFIG_VGACON_SOFT_SCROLLBACK=y
-# CONFIG_VGACON_SOFT_SCROLLBACK_PERSISTENT_ENABLE_BY_DEFAULT is not set
-CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
-# CONFIG_WDT is not set
-CONFIG_X86_ACPI_CPUFREQ=y
-# CONFIG_X86_ACPI_CPUFREQ_CPB is not set
-# CONFIG_X86_AMD_FREQ_SENSITIVITY is not set
-# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
-# CONFIG_X86_E_POWERSAVER is not set
-# CONFIG_X86_INTEL_LPSS is not set
-# CONFIG_X86_LONGHAUL is not set
-# CONFIG_X86_PAE is not set
-# CONFIG_X86_PCC_CPUFREQ is not set
-CONFIG_X86_PM_TIMER=y
-# CONFIG_X86_POWERNOW_K8 is not set
-CONFIG_ZLIB_DEFLATE=y
+++ /dev/null
---- a/scripts/Makefile.lib
-+++ b/scripts/Makefile.lib
-@@ -325,7 +325,7 @@ cmd_bzip2 = (cat $(filter-out FORCE,$^)
-
- quiet_cmd_lzma = LZMA $@
- cmd_lzma = (cat $(filter-out FORCE,$^) | \
-- lzma e -d20 -lc1 -lp2 -pb2 -eos -si -so && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
-+ lzma e -lc8 -eos -si -so && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
- (rm -f $@ ; false)
-
- quiet_cmd_lzo = LZO $@
---- a/arch/x86/include/asm/boot.h
-+++ b/arch/x86/include/asm/boot.h
-@@ -24,7 +24,7 @@
- # error "Invalid value for CONFIG_PHYSICAL_ALIGN"
- #endif
-
--#ifdef CONFIG_KERNEL_BZIP2
-+#if defined(CONFIG_KERNEL_BZIP2) || defined(CONFIG_KERNEL_LZMA)
- # define BOOT_HEAP_SIZE 0x400000
- #else /* !CONFIG_KERNEL_BZIP2 */
- # define BOOT_HEAP_SIZE 0x10000
+++ /dev/null
---- a/drivers/clocksource/cs5535-clockevt.c
-+++ b/drivers/clocksource/cs5535-clockevt.c
-@@ -130,7 +130,8 @@ static irqreturn_t mfgpt_tick(int irq, v
- cs5535_mfgpt_write(cs5535_event_clock, MFGPT_REG_SETUP,
- MFGPT_SETUP_CNTEN | MFGPT_SETUP_CMP2);
-
-- cs5535_clockevent.event_handler(&cs5535_clockevent);
-+ if (cs5535_clockevent.event_handler)
-+ cs5535_clockevent.event_handler(&cs5535_clockevent);
- return IRQ_HANDLED;
- }
-
+++ /dev/null
---- a/arch/x86/kernel/reboot.c
-+++ b/arch/x86/kernel/reboot.c
-@@ -477,6 +477,16 @@ static const struct dmi_system_id reboot
- },
- },
-
-+ /* PC Engines */
-+ { /* Handle problems with rebooting on PC Engines apu2 */
-+ .callback = set_pci_reboot,
-+ .ident = "PC Engines apu2",
-+ .matches = {
-+ DMI_MATCH(DMI_BOARD_VENDOR, "PC Engines"),
-+ DMI_MATCH(DMI_BOARD_NAME, "apu2"),
-+ },
-+ },
-+
- /* Sony */
- { /* Handle problems with rebooting on Sony VGN-Z540N */
- .callback = set_bios_reboot,
+++ /dev/null
---- a/drivers/hwmon/w83627ehf.c
-+++ b/drivers/hwmon/w83627ehf.c
-@@ -2717,8 +2717,8 @@ static int __init w83627ehf_find(int sio
- static const char sio_name_W83627UHG[] __initconst = "W83627UHG";
- static const char sio_name_W83667HG[] __initconst = "W83667HG";
- static const char sio_name_W83667HG_B[] __initconst = "W83667HG-B";
-- static const char sio_name_NCT6775[] __initconst = "NCT6775F";
-- static const char sio_name_NCT6776[] __initconst = "NCT6776F";
-+/* static const char sio_name_NCT6775[] __initconst = "NCT6775F";
-+ static const char sio_name_NCT6776[] __initconst = "NCT6776F"; */
-
- u16 val;
- const char *sio_name;
-@@ -2762,14 +2762,14 @@ static int __init w83627ehf_find(int sio
- sio_data->kind = w83667hg_b;
- sio_name = sio_name_W83667HG_B;
- break;
-- case SIO_NCT6775_ID:
-+/* case SIO_NCT6775_ID:
- sio_data->kind = nct6775;
- sio_name = sio_name_NCT6775;
- break;
- case SIO_NCT6776_ID:
- sio_data->kind = nct6776;
- sio_name = sio_name_NCT6776;
-- break;
-+ break; */
- default:
- if (val != 0xffff)
- pr_debug("unsupported chip ID: 0x%04x\n", val);
+++ /dev/null
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_ALTERA_PR_IP_CORE is not set
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_KCOV=y
-CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
-CONFIG_ARCH_HAS_PHYS_TO_DMA=y
-CONFIG_ARCH_HAS_RESET_CONTROLLER=y
-CONFIG_ARCH_HAS_SET_MEMORY=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
-CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_NR_GPIO=1024
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_VEXPRESS=y
-CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA=y
-# CONFIG_ARCH_VEXPRESS_SPC is not set
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_ZYNQ=y
-CONFIG_ARM=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_CCI=y
-CONFIG_ARM_CCI400_COMMON=y
-CONFIG_ARM_CCI400_PMU=y
-CONFIG_ARM_CCI_PMU=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_ERRATA_643719=y
-CONFIG_ARM_ERRATA_720789=y
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_ARM_ERRATA_754327=y
-CONFIG_ARM_ERRATA_764369=y
-CONFIG_ARM_ERRATA_775420=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GLOBAL_TIMER=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_HEAVY_MB=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-# CONFIG_ARM_LPAE is not set
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-# CONFIG_ARM_PL172_MPMC is not set
-CONFIG_ARM_PMU=y
-# CONFIG_ARM_SMMU is not set
-# CONFIG_ARM_SP805_WATCHDOG is not set
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-CONFIG_ARM_TIMER_SP804=y
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ARM_ZYNQ_CPUIDLE=y
-CONFIG_ATAGS=y
-CONFIG_AUTO_ZRELADDR=y
-# CONFIG_AXI_DMAC is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BOUNCE=y
-CONFIG_BUILD_BIN2C=y
-CONFIG_CACHE_L2X0=y
-CONFIG_CADENCE_TTC_TIMER=y
-CONFIG_CADENCE_WATCHDOG=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLKSRC_VERSATILE=y
-CONFIG_CLK_SP810=y
-CONFIG_CLK_VEXPRESS_OSC=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMA=y
-CONFIG_CMA_ALIGNMENT=8
-CONFIG_CMA_AREAS=7
-# CONFIG_CMA_DEBUG is not set
-# CONFIG_CMA_DEBUGFS is not set
-CONFIG_CMA_SIZE_MBYTES=16
-# CONFIG_CMA_SIZE_SEL_MAX is not set
-CONFIG_CMA_SIZE_SEL_MBYTES=y
-# CONFIG_CMA_SIZE_SEL_MIN is not set
-# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
-CONFIG_COMMON_CLK=y
-# CONFIG_COMMON_CLK_AXI_CLKGEN is not set
-CONFIG_COMMON_CLK_SI570=y
-CONFIG_COMMON_CLK_VERSATILE=y
-CONFIG_CONNECTOR=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_COREDUMP=y
-# CONFIG_CPUFREQ_DT is not set
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_HAS_ASID=y
-# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SPECTRE=y
-CONFIG_CPU_THERMAL=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-# CONFIG_CRC32_SARWATE is not set
-CONFIG_CRC32_SLICEBY8=y
-CONFIG_CROSS_MEMORY_ATTACH=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-# CONFIG_DEBUG_USER is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_DMADEVICES=y
-CONFIG_DMA_CMA=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_DRM=y
-CONFIG_DRM_BRIDGE=y
-CONFIG_DRM_FBDEV_EMULATION=y
-CONFIG_DRM_FBDEV_OVERALLOC=100
-CONFIG_DRM_KMS_FB_HELPER=y
-CONFIG_DRM_KMS_HELPER=y
-CONFIG_DRM_PANEL=y
-CONFIG_DRM_PANEL_BRIDGE=y
-CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
-# CONFIG_DRM_TVE200 is not set
-CONFIG_DTC=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_E1000E=y
-CONFIG_EDAC=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-# CONFIG_EDAC_DEBUG is not set
-CONFIG_EDAC_LEGACY_SYSFS=y
-CONFIG_EDAC_SUPPORT=y
-# CONFIG_EDAC_SYNOPSYS is not set
-CONFIG_EEPROM_AT24=y
-CONFIG_EEPROM_AT25=y
-CONFIG_ELF_CORE=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_EXT4_FS=y
-CONFIG_EXTCON=y
-CONFIG_F2FS_FS=y
-CONFIG_FB=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_CMDLINE=y
-CONFIG_FB_DEFERRED_IO=y
-CONFIG_FB_SYS_COPYAREA=y
-CONFIG_FB_SYS_FILLRECT=y
-CONFIG_FB_SYS_FOPS=y
-CONFIG_FB_SYS_IMAGEBLIT=y
-# CONFIG_FB_XILINX is not set
-CONFIG_FHANDLE=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FPGA=y
-CONFIG_FPGA_BRIDGE=y
-# CONFIG_FPGA_DFL is not set
-# CONFIG_FPGA_MGR_ALTERA_CVP is not set
-# CONFIG_FPGA_MGR_ALTERA_PS_SPI is not set
-# CONFIG_FPGA_MGR_ICE40_SPI is not set
-# CONFIG_FPGA_MGR_MACHXO2_SPI is not set
-# CONFIG_FPGA_MGR_XILINX_SPI is not set
-CONFIG_FPGA_MGR_ZYNQ_FPGA=y
-CONFIG_FPGA_REGION=y
-CONFIG_FREEZER=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_GPIO_ZYNQ=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_BITREVERSE=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARM_SCU=y
-CONFIG_HAVE_ARM_SMCCC=y
-CONFIG_HAVE_ARM_TWD=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
-CONFIG_HAVE_EBPF_JIT=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_HW_BREAKPOINT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PATA_PLATFORM=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_RSEQ=y
-CONFIG_HAVE_SMP=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HDMI=y
-CONFIG_HID=y
-CONFIG_HID_GENERIC=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HIGHMEM=y
-# CONFIG_HIGHPTE is not set
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HWMON=y
-CONFIG_HW_CONSOLE=y
-CONFIG_HZ_FIXED=0
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CADENCE=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_COMPAT=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_ICST=y
-CONFIG_IIO=y
-CONFIG_IIO_BUFFER=y
-CONFIG_IIO_KFIFO_BUF=y
-CONFIG_IIO_TRIGGER=y
-CONFIG_IIO_TRIGGERED_BUFFER=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_INPUT_MISC is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_INPUT_POLLDEV=y
-CONFIG_INPUT_SPARSEKMAP=y
-# CONFIG_IOMMU_DEBUGFS is not set
-# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
-# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
-CONFIG_IOMMU_SUPPORT=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-# CONFIG_ISDN is not set
-CONFIG_JBD2=y
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_KERNEL_GZIP=y
-# CONFIG_KERNEL_MODE_NEON is not set
-# CONFIG_KERNEL_XZ is not set
-CONFIG_KEYBOARD_ATKBD=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_GPIO_POLLED=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_LEDS_TRIGGER_CAMERA=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_NETDEV is not set
-CONFIG_LEDS_TRIGGER_ONESHOT=y
-CONFIG_LEDS_TRIGGER_TRANSIENT=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_MACB=y
-# CONFIG_MACB_PCI is not set
-CONFIG_MACB_USE_HWSTAMP=y
-CONFIG_MARVELL_PHY=y
-CONFIG_MDIO_BITBANG=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-# CONFIG_MDIO_GPIO is not set
-CONFIG_MEMFD_CREATE=y
-CONFIG_MEMORY=y
-CONFIG_MEMORY_ISOLATION=y
-CONFIG_MFD_CORE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MFD_VEXPRESS_SYSREG=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_CQHCI=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_OF_ARASAN=y
-# CONFIG_MMC_SDHCI_PCI is not set
-CONFIG_MMC_SDHCI_PLTFM=y
-# CONFIG_MMC_TIFM_SD is not set
-CONFIG_MODULES_TREE_LOOKUP=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODULE_STRIPPED is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_CYAPA is not set
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_BYD=y
-CONFIG_MOUSE_PS2_CYPRESS=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-CONFIG_MOUSE_PS2_FOCALTECH=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SMBUS=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-# CONFIG_MTD_SPLIT_SQUASHFS_ROOT is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEON=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_PTP_CLASSIFY=y
-# CONFIG_NET_VENDOR_CIRRUS is not set
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_MICROCHIP is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_VIA is not set
-# CONFIG_NI_XGE_MANAGEMENT_ENET is not set
-CONFIG_NLS=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NOP_USB_XCEIV=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NO_HZ=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NO_IOPORT_MAP=y
-CONFIG_NR_CPUS=4
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-# CONFIG_OF_FPGA_REGION is not set
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_PCI=y
-CONFIG_PCIE_XILINX=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-# CONFIG_PCI_V3_SEMI is not set
-CONFIG_PERF_EVENTS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PINCTRL=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PINCTRL_ZYNQ=y
-CONFIG_PL310_ERRATA_588369=y
-CONFIG_PL310_ERRATA_727915=y
-CONFIG_PL310_ERRATA_753970=y
-CONFIG_PL310_ERRATA_769419=y
-CONFIG_PL330_DMA=y
-CONFIG_PLAT_VERSATILE=y
-CONFIG_PLUGIN_HOSTCC="g++"
-CONFIG_PM=y
-CONFIG_PMBUS=y
-CONFIG_PM_CLK=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_SLEEP=y
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_VEXPRESS=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PPS=y
-CONFIG_PROC_EVENTS=y
-# CONFIG_PROC_STRIPPED is not set
-CONFIG_PTP_1588_CLOCK=y
-CONFIG_R8169=y
-CONFIG_RAS=y
-CONFIG_RATIONAL=y
-CONFIG_RCU_NEED_SEGCBLIST=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_REALTEK_PHY=y
-CONFIG_REFCOUNT_FULL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-# CONFIG_REGULATOR_VEXPRESS is not set
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RESET_ZYNQ=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_DRV_CMOS is not set
-CONFIG_RTC_DRV_PCF8563=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SCHED_MC=y
-CONFIG_SCHED_SMT=y
-CONFIG_SENSORS_PMBUS=y
-CONFIG_SENSORS_UCD9000=y
-CONFIG_SENSORS_UCD9200=y
-# CONFIG_SERIAL_8250 is not set
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIAL_XILINX_PS_UART=y
-CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
-CONFIG_SERIO=y
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SOC_BUS=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_CADENCE=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SPI_XILINX=y
-CONFIG_SRAM=y
-CONFIG_SRAM_EXEC=y
-CONFIG_SRCU=y
-# CONFIG_STAGING is not set
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_SWPHY=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYNC_FILE=y
-CONFIG_SYSFS_SYSCALL=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-# CONFIG_TEXTSEARCH is not set
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_HWMON=y
-CONFIG_THERMAL_OF=y
-# CONFIG_THUMB2_KERNEL is not set
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-# CONFIG_TMPFS_XATTR is not set
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UIO=y
-# CONFIG_UIO_AEC is not set
-# CONFIG_UIO_CIF is not set
-# CONFIG_UIO_DMEM_GENIRQ is not set
-# CONFIG_UIO_MF624 is not set
-# CONFIG_UIO_NETX is not set
-# CONFIG_UIO_PCI_GENERIC is not set
-CONFIG_UIO_PDRV_GENIRQ=y
-# CONFIG_UIO_PRUSS is not set
-# CONFIG_UIO_SERCOS3 is not set
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_USB=y
-CONFIG_USB_CHIPIDEA=y
-CONFIG_USB_CHIPIDEA_HOST=y
-CONFIG_USB_CHIPIDEA_OF=y
-CONFIG_USB_CHIPIDEA_UDC=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_HCD_PLATFORM is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_XILINX=y
-CONFIG_USB_HID=y
-CONFIG_USB_NET_DRIVERS=y
-CONFIG_USB_OTG=y
-CONFIG_USB_OTG_FSM=y
-CONFIG_USB_PHY=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_ULPI_BUS=y
-CONFIG_USB_ULPI_VIEWPORT=y
-# CONFIG_USERIO is not set
-CONFIG_USE_OF=y
-CONFIG_VEXPRESS_CONFIG=y
-CONFIG_VEXPRESS_SYSCFG=y
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_VGA_ARB=y
-CONFIG_VGA_ARB_MAX_GPUS=16
-CONFIG_VITESSE_PHY=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_CONSOLE_SLEEP=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_WEXT_PRIV is not set
-# CONFIG_WEXT_SPY is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
-CONFIG_XILINX_EMACLITE=y
-# CONFIG_XILINX_PR_DECOUPLER is not set
-CONFIG_XILINX_WATCHDOG=y
-CONFIG_XILINX_XADC=y
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_SPARC=y
-CONFIG_XZ_DEC_X86=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
projects / openwrt / staging / chunkeey.git / commitdiff