package/boot/uboot-mediatek/patches/440-add-xiaomi_mi-router-ax3000t.patch

   1 --- /dev/null
   2 +++ b/configs/mt7981_xiaomi_mi-router-ax3000t_defconfig
   3 @@ -0,0 +1,163 @@
   4 +CONFIG_ARM=y
   5 +CONFIG_POSITION_INDEPENDENT=y
   6 +CONFIG_ARCH_MEDIATEK=y
   7 +CONFIG_TARGET_MT7981=y
   8 +CONFIG_TEXT_BASE=0x41e00000
   9 +CONFIG_SYS_MALLOC_F_LEN=0x4000
  10 +CONFIG_SYS_HAS_NONCACHED_MEMORY=y
  11 +CONFIG_NR_DRAM_BANKS=1
  12 +CONFIG_DEFAULT_DEVICE_TREE="mt7981_xiaomi_mi-router-ax3000t"
  13 +CONFIG_DEFAULT_ENV_FILE="xiaomi_mi-router-ax3000t_env"
  14 +CONFIG_DEFAULT_FDT_FILE="mediatek/mt7981_xiaomi_mi-router-ax3000t.dtb"
  15 +CONFIG_OF_LIBFDT_OVERLAY=y
  16 +CONFIG_DEBUG_UART_BASE=0x11002000
  17 +CONFIG_DEBUG_UART_CLOCK=40000000
  18 +CONFIG_DEBUG_UART=y
  19 +CONFIG_SYS_LOAD_ADDR=0x46000000
  20 +CONFIG_SMBIOS_PRODUCT_NAME=""
  21 +CONFIG_AUTOBOOT_KEYED=y
  22 +CONFIG_BOOTDELAY=30
  23 +CONFIG_AUTOBOOT_MENU_SHOW=y
  24 +CONFIG_CFB_CONSOLE_ANSI=y
  25 +CONFIG_BOARD_LATE_INIT=y
  26 +CONFIG_BUTTON=y
  27 +CONFIG_BUTTON_GPIO=y
  28 +CONFIG_GPIO_HOG=y
  29 +CONFIG_CMD_ENV_FLAGS=y
  30 +CONFIG_FIT=y
  31 +CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
  32 +CONFIG_LED=y
  33 +CONFIG_LED_BLINK=y
  34 +CONFIG_LED_GPIO=y
  35 +CONFIG_LOGLEVEL=7
  36 +CONFIG_LOG=y
  37 +CONFIG_SYS_PROMPT="MT7981> "
  38 +CONFIG_CMD_BOOTMENU=y
  39 +CONFIG_CMD_BOOTP=y
  40 +CONFIG_CMD_BUTTON=y
  41 +CONFIG_CMD_CACHE=y
  42 +CONFIG_CMD_CDP=y
  43 +CONFIG_CMD_CPU=y
  44 +CONFIG_CMD_DHCP=y
  45 +CONFIG_CMD_DM=y
  46 +CONFIG_CMD_DNS=y
  47 +CONFIG_CMD_ECHO=y
  48 +CONFIG_CMD_ENV_READMEM=y
  49 +CONFIG_CMD_ERASEENV=y
  50 +# CONFIG_CMD_EXT4 is not set
  51 +# CONFIG_CMD_FAT is not set
  52 +CONFIG_CMD_FDT=y
  53 +# CONFIG_CMD_FS_GENERIC is not set
  54 +# CONFIG_CMD_FS_UUID is not set
  55 +CONFIG_CMD_GPIO=y
  56 +CONFIG_CMD_GPT=y
  57 +CONFIG_CMD_HASH=y
  58 +CONFIG_CMD_ITEST=y
  59 +CONFIG_CMD_LED=y
  60 +CONFIG_CMD_LICENSE=y
  61 +CONFIG_CMD_LINK_LOCAL=y
  62 +# CONFIG_CMD_MBR is not set
  63 +CONFIG_CMD_MTD=y
  64 +# CONFIG_CMD_PCI is not set
  65 +CONFIG_CMD_PSTORE=y
  66 +CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
  67 +CONFIG_CMD_SF_TEST=y
  68 +CONFIG_CMD_PING=y
  69 +CONFIG_CMD_PXE=y
  70 +# CONFIG_CMD_PWM is not set
  71 +CONFIG_CMD_SMC=y
  72 +CONFIG_CMD_TFTPBOOT=y
  73 +CONFIG_CMD_TFTPSRV=y
  74 +CONFIG_CMD_UBI=y
  75 +CONFIG_CMD_UBI_RENAME=y
  76 +CONFIG_CMD_UBIFS=y
  77 +CONFIG_CMD_ASKENV=y
  78 +CONFIG_CMD_PART=y
  79 +CONFIG_CMD_RARP=y
  80 +CONFIG_CMD_SETEXPR=y
  81 +CONFIG_CMD_SLEEP=y
  82 +CONFIG_CMD_SNTP=y
  83 +CONFIG_CMD_SOURCE=y
  84 +CONFIG_CMD_STRINGS=y
  85 +# CONFIG_CMD_USB is not set
  86 +# CONFIG_CMD_FLASH is not set
  87 +CONFIG_CMD_UUID=y
  88 +CONFIG_DISPLAY_CPUINFO=y
  89 +CONFIG_DM_MTD=y
  90 +CONFIG_DM_REGULATOR=y
  91 +CONFIG_DM_REGULATOR_FIXED=y
  92 +CONFIG_DM_REGULATOR_GPIO=y
  93 +# CONFIG_DM_USB is not set
  94 +# CONFIG_DM_PWM is not set
  95 +# CONFIG_PWM_MTK is not set
  96 +CONFIG_HUSH_PARSER=y
  97 +CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
  98 +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
  99 +CONFIG_VERSION_VARIABLE=y
 100 +CONFIG_PARTITION_UUIDS=y
 101 +CONFIG_NETCONSOLE=y
 102 +CONFIG_REGMAP=y
 103 +CONFIG_SYSCON=y
 104 +CONFIG_CLK=y
 105 +CONFIG_DM_GPIO=y
 106 +# CONFIG_DM_SCSI is not set
 107 +# CONFIG_AHCI is not set
 108 +CONFIG_PHY=y
 109 +# CONFIG_PHY_MTK_TPHY is not set
 110 +CONFIG_PHY_FIXED=y
 111 +CONFIG_MTK_AHCI=y
 112 +CONFIG_DM_ETH=y
 113 +CONFIG_MEDIATEK_ETH=y
 114 +# CONFIG_PCI is not set
 115 +# CONFIG_MMC is not set
 116 +# CONFIG_DM_MMC is not set
 117 +CONFIG_MTD=y
 118 +CONFIG_MTD_UBI_FASTMAP=y
 119 +# CONFIG_DM_PCI is not set
 120 +# CONFIG_PCIE_MEDIATEK is not set
 121 +CONFIG_PINCTRL=y
 122 +CONFIG_PINCONF=y
 123 +CONFIG_PINCTRL_MT7981=y
 124 +CONFIG_POWER_DOMAIN=y
 125 +CONFIG_PRE_CONSOLE_BUFFER=y
 126 +CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
 127 +CONFIG_MTK_POWER_DOMAIN=y
 128 +CONFIG_RAM=y
 129 +CONFIG_DM_SERIAL=y
 130 +CONFIG_MTK_SERIAL=y
 131 +CONFIG_SPI=y
 132 +CONFIG_DM_SPI=y
 133 +CONFIG_MTK_SPI_NAND=y
 134 +CONFIG_MTK_SPI_NAND_MTD=y
 135 +CONFIG_SYSRESET_WATCHDOG=y
 136 +CONFIG_WDT_MTK=y
 137 +CONFIG_LZO=y
 138 +CONFIG_ZSTD=y
 139 +CONFIG_HEXDUMP=y
 140 +CONFIG_RANDOM_UUID=y
 141 +CONFIG_REGEX=y
 142 +# CONFIG_USB is not set
 143 +# CONFIG_USB_HOST is not set
 144 +# CONFIG_USB_XHCI_HCD is not set
 145 +# CONFIG_USB_XHCI_MTK is not set
 146 +# CONFIG_USB_STORAGE is not set
 147 +CONFIG_OF_EMBED=y
 148 +CONFIG_ENV_OVERWRITE=y
 149 +CONFIG_ENV_IS_IN_UBI=y
 150 +CONFIG_ENV_UBI_PART="ubi"
 151 +CONFIG_ENV_SIZE=0x1f000
 152 +CONFIG_ENV_SIZE_REDUND=0x1f000
 153 +CONFIG_ENV_UBI_VOLUME="ubootenv"
 154 +CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
 155 +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 156 +CONFIG_NET_RANDOM_ETHADDR=y
 157 +CONFIG_USE_DEFAULT_ENV_FILE=y
 158 +CONFIG_MTD_SPI_NAND=y
 159 +CONFIG_MTK_SPIM=y
 160 +CONFIG_CMD_NAND=y
 161 +CONFIG_CMD_NAND_TRIMFFS=y
 162 +CONFIG_LMB_MAX_REGIONS=64
 163 +CONFIG_USE_IPADDR=y
 164 +CONFIG_IPADDR="192.168.1.1"
 165 +CONFIG_USE_SERVERIP=y
 166 +CONFIG_SERVERIP="192.168.1.254"
 167 --- /dev/null
 168 +++ b/arch/arm/dts/mt7981_xiaomi_mi-router-ax3000t.dts
 169 @@ -0,0 +1,187 @@
 170 +// SPDX-License-Identifier: GPL-2.0
 171 +/*
 172 + * Copyright (c) 2022 MediaTek Inc.
 173 + * Author: Sam Shih <sam.shih@mediatek.com>
 174 + */
 175 +
 176 +/dts-v1/;
 177 +#include "mt7981.dtsi"
 178 +#include <dt-bindings/gpio/gpio.h>
 179 +#include <dt-bindings/input/linux-event-codes.h>
 180 +
 181 +/ {
 182 +       #address-cells = <1>;
 183 +       #size-cells = <1>;
 184 +       model = "Xiaomi Router AX3000T";
 185 +       compatible = "mediatek,mt7981", "mediatek,mt7981-rfb";
 186 +
 187 +       chosen {
 188 +               stdout-path = &uart0;
 189 +               tick-timer = &timer0;
 190 +       };
 191 +
 192 +       memory@40000000 {
 193 +               device_type = "memory";
 194 +               reg = <0x40000000 0x10000000>;
 195 +       };
 196 +
 197 +       gpio-keys {
 198 +               compatible = "gpio-keys";
 199 +
 200 +               reset {
 201 +                       label = "reset";
 202 +                       gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
 203 +                       linux,code = <KEY_RESTART>;
 204 +               };
 205 +
 206 +               mesh {
 207 +                       label = "mesh";
 208 +                       gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
 209 +                       linux,code = <BTN_9>;
 210 +                       linux,input-type = <EV_SW>;
 211 +               };
 212 +       };
 213 +
 214 +       leds {
 215 +               compatible = "gpio-leds";
 216 +
 217 +               led_status_blue {
 218 +                       label = "blue:status";
 219 +                       gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
 220 +               };
 221 +
 222 +               led_status_yellow {
 223 +                       label = "yellow:status";
 224 +                       gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
 225 +               };
 226 +       };
 227 +};
 228 +
 229 +&uart0 {
 230 +       mediatek,force-highspeed;
 231 +       status = "okay";
 232 +};
 233 +
 234 +&eth {
 235 +       status = "okay";
 236 +       mediatek,gmac-id = <0>;
 237 +       phy-mode = "2500base-x";
 238 +       mediatek,switch = "mt7531";
 239 +       reset-gpios = <&gpio 39 GPIO_ACTIVE_HIGH>;
 240 +
 241 +       fixed-link {
 242 +               speed = <2500>;
 243 +               full-duplex;
 244 +       };
 245 +};
 246 +
 247 +&pinctrl {
 248 +       spic_pins: spi1-pins-func-1 {
 249 +               mux {
 250 +                       function = "spi";
 251 +                       groups = "spi1_1";
 252 +               };
 253 +       };
 254 +
 255 +       uart1_pins: spi1-pins-func-3 {
 256 +               mux {
 257 +                       function = "uart";
 258 +                       groups = "uart1_2";
 259 +               };
 260 +       };
 261 +
 262 +       spi_flash_pins: spi0-pins-func-1 {
 263 +               mux {
 264 +                       function = "flash";
 265 +                       groups = "spi0", "spi0_wp_hold";
 266 +               };
 267 +
 268 +               conf-pu {
 269 +                       pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
 270 +                       drive-strength = <MTK_DRIVE_8mA>;
 271 +                       bias-pull-up = <MTK_PUPD_SET_R1R0_11>;
 272 +               };
 273 +
 274 +               conf-pd {
 275 +                       pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
 276 +                       drive-strength = <MTK_DRIVE_8mA>;
 277 +                       bias-pull-down = <MTK_PUPD_SET_R1R0_11>;
 278 +               };
 279 +       };
 280 +};
 281 +
 282 +&spi0 {
 283 +       #address-cells = <1>;
 284 +       #size-cells = <0>;
 285 +       pinctrl-names = "default";
 286 +       pinctrl-0 = <&spi_flash_pins>;
 287 +       status = "okay";
 288 +       must_tx;
 289 +       enhance_timing;
 290 +       dma_ext;
 291 +       ipm_design;
 292 +       support_quad;
 293 +       tick_dly = <2>;
 294 +       sample_sel = <0>;
 295 +
 296 +       spi_nand@0 {
 297 +               compatible = "spi-nand";
 298 +               reg = <0>;
 299 +               spi-max-frequency = <52000000>;
 300 +
 301 +               partitions {
 302 +                       compatible = "fixed-partitions";
 303 +                       #address-cells = <1>;
 304 +                       #size-cells = <1>;
 305 +
 306 +                       partition@0 {
 307 +                               label = "bl2";
 308 +                               reg = <0x00 0x100000>;
 309 +                       };
 310 +
 311 +                       partition@100000 {
 312 +                               label = "Nvram";
 313 +                               reg = <0x100000 0x40000>;
 314 +                       };
 315 +
 316 +                       partition@140000 {
 317 +                               label = "Bdata";
 318 +                               reg = <0x140000 0x40000>;
 319 +                       };
 320 +
 321 +                       partition@180000 {
 322 +                               label = "factory";
 323 +                               reg = <0x180000 0x200000>;
 324 +                       };
 325 +
 326 +                       partition@380000 {
 327 +                               label = "fip";
 328 +                               reg = <0x380000 0x200000>;
 329 +                       };
 330 +
 331 +                       partition@580000 {
 332 +                               label = "crash";
 333 +                               reg = <0x580000 0x40000>;
 334 +                       };
 335 +
 336 +                       partition@5c0000 {
 337 +                               label = "crash_log";
 338 +                               reg = <0x5c0000 0x40000>;
 339 +                       };
 340 +
 341 +                       partition@600000 {
 342 +                               label = "ubi";
 343 +                               reg = <0x600000 0x7000000>;
 344 +                       };
 345 +
 346 +                       partition@7600000 {
 347 +                               label = "KF";
 348 +                               reg = <0x7600000 0x40000>;
 349 +                       };
 350 +               };
 351 +       };
 352 +};
 353 +
 354 +&watchdog {
 355 +       status = "disabled";
 356 +};
 357 --- /dev/null
 358 +++ b/xiaomi_mi-router-ax3000t_env
 359 @@ -0,0 +1,55 @@
 360 +ipaddr=192.168.1.1
 361 +serverip=192.168.1.254
 362 +loadaddr=0x46000000
 363 +console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
 364 +bootargs=console=ttyS0,115200n8 console_msg_format=syslog
 365 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
 366 +bootconf=config-1
 367 +bootdelay=0
 368 +bootfile=openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-initramfs-recovery.itb
 369 +bootfile_bl2=openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-preloader.bin
 370 +bootfile_fip=openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-bl31-uboot.fip
 371 +bootfile_upg=openwrt-mediatek-filogic-xiaomi_mi-router-ax3000t-ubootmod-squashfs-sysupgrade.itb
 372 +bootled_pwr=yellow:status
 373 +bootled_rec=blue:status
 374 +bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
 375 +bootmenu_default=0
 376 +bootmenu_delay=0
 377 +bootmenu_title=      \e[0;34m( ( ( \e[1;39mOpenWrt\e[0;34m ) ) )
 378 +bootmenu_0=Initialize environment.=run _firstboot
 379 +bootmenu_0d=Run default boot command.=run boot_default
 380 +bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
 381 +bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
 382 +bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
 383 +bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
 384 +bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
 385 +bootmenu_6=\e[31mLoad BL31+U-Boot FIP via TFTP then write to NAND.\e[0m=run boot_tftp_write_fip ; run bootmenu_confirm_return
 386 +bootmenu_7=\e[31mLoad BL2 preloader via TFTP then write to NAND.\e[0m=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
 387 +bootmenu_8=Reboot.=reset
 388 +bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
 389 +boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
 390 +boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
 391 +boot_production=led $bootled_pwr on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
 392 +boot_recovery=led $bootled_rec on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off
 393 +boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever
 394 +boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
 395 +boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
 396 +boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
 397 +boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
 398 +boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory
 399 +boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
 400 +reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
 401 +mtd_write_fip=mtd erase fip && mtd write fip $loadaddr
 402 +mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr
 403 +ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic 0 || run ubi_format ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic 1 || run ubi_format
 404 +ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset
 405 +ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
 406 +ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs
 407 +ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
 408 +ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
 409 +ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic 2 && ubi write $loadaddr fit $filesize
 410 +ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic 3 && ubi write $loadaddr recovery $filesize
 411 +_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
 412 +_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first
 413 +_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
 414 +_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       \e[33m$ver\e[0m"