1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7 #include <dt-bindings/leds/common.h>
10 model = "OCEDO Raccoon";
11 compatible = "ocedo,raccoon", "qca,ar9344";
14 bootargs = "console=ttyS0,115200n8";
18 led-boot = &led_system;
19 led-failsafe = &led_system;
20 led-running = &led_system;
21 led-upgrade = &led_system;
25 compatible = "gpio-leds";
28 function = LED_FUNCTION_POWER;
29 color = <LED_COLOR_ID_GREEN>;
30 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
35 label = "yellow:wlan24";
36 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
37 linux,default-trigger = "phy0tpt";
42 gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
47 compatible = "gpio-leds";
51 gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
52 linux,default-trigger = "phy1tpt";
57 compatible = "gpio-keys";
60 linux,code = <KEY_RESTART>;
61 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
62 debounce-interval = <60>;
68 clock-frequency = <40000000>;
75 compatible = "jedec,spi-nor";
77 spi-max-frequency = <50000000>;
80 compatible = "fixed-partitions";
86 reg = <0x000000 0x040000>;
92 reg = <0x040000 0x010000>;
96 /* Dual-Flash layout combined */
97 compatible = "denx,uimage";
99 reg = <0x050000 0xe80000>;
104 reg = <0xed0000 0x110000>;
110 reg = <0xfe0000 0x010000>;
116 reg = <0xff0000 0x010000>;
120 compatible = "fixed-layout";
121 #address-cells = <1>;
124 macaddr_art_0: macaddr@0 {
128 macaddr_art_6: macaddr@6 {
132 macaddr_art_c: macaddr@c {
136 calibration_art_1000: calibration@1000 {
137 reg = <0x1000 0x440>;
140 calibration_art_5000: calibration@5000 {
141 reg = <0x5000 0x440>;
153 compatible = "pci168c,0030";
154 reg = <0x0000 0 0 0 0>;
155 nvmem-cells = <&macaddr_art_c>, <&calibration_art_5000>;
156 nvmem-cell-names = "mac-address", "calibration";
165 nvmem-cells = <&macaddr_art_6>, <&calibration_art_1000>;
166 nvmem-cell-names = "mac-address", "calibration";
172 phy0: ethernet-phy@0 {
182 pll-data = <0x02000000 0x00000101 0x00001313>;
184 nvmem-cells = <&macaddr_art_0>;
185 nvmem-cell-names = "mac-address";
187 phy-mode = "rgmii-id";
188 phy-handle = <&phy0>;