target/linux/ath79/dts/ar9344_tplink_tl-wdr4300.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "ar9344_tplink_tl-wdrxxxx.dtsi"
   4
   5 / {
   6         aliases {
   7                 label-mac-device = &ath9k;
   8         };
   9
  10         gpio-export {
  11                 compatible = "gpio-export";
  12
  13                 gpio_usb1_power {
  14                         gpio-export,name = "tp-link:power:usb1";
  15                         gpio-export,output = <1>;
  16                         gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
  17                 };
  18
  19                 gpio_usb2_power {
  20                         gpio-export,name = "tp-link:power:usb2";
  21                         gpio-export,output = <1>;
  22                         gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
  23                 };
  24
  25                 gpio_ext_lna0 {
  26                         gpio-export,name = "tp-link:ext:lna0";
  27                         gpio-export,output = <1>;
  28                         gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
  29                 };
  30
  31                 gpio_ext_lna1 {
  32                         gpio-export,name = "tp-link:ext:lna1";
  33                         gpio-export,output = <1>;
  34                         gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
  35                 };
  36         };
  37 };
  38
  39 &leds {
  40         usb1 {
  41                 label = "green:usb1";
  42                 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  43                 trigger-sources = <&hub_port1>;
  44                 linux,default-trigger = "usbport";
  45         };
  46
  47         usb2 {
  48                 label = "green:usb2";
  49                 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  50                 trigger-sources = <&hub_port2>;
  51                 linux,default-trigger = "usbport";
  52         };
  53 };
  54
  55 &usb {
  56         status = "okay";
  57 };
  58
  59 &hub_port {
  60         #address-cells = <1>;
  61         #size-cells = <0>;
  62
  63         hub_port1: port@1 {
  64                 reg = <1>;
  65                 #trigger-source-cells = <0>;
  66         };
  67
  68         hub_port2: port@2 {
  69                 reg = <2>;
  70                 #trigger-source-cells = <0>;
  71         };
  72 };
  73
  74 &usb_phy {
  75         status = "okay";
  76 };
  77
  78 &wmac {
  79         status = "okay";
  80         nvmem-cells = <&macaddr_uboot_1fc00 (-1)>, <&cal_art_1000>;
  81         nvmem-cell-names = "mac-address", "calibration";
  82 };
  83
  84 &pcie {
  85         status = "okay";
  86
  87         ath9k: wifi@0,0 {
  88                 compatible = "pci168c,0033";
  89                 reg = <0x0000 0 0 0 0>;
  90                 #gpio-cells = <2>;
  91                 gpio-controller;
  92                 nvmem-cells = <&macaddr_uboot_1fc00 0>, <&cal_art_5000>;
  93                 nvmem-cell-names = "mac-address", "calibration";
  94         };
  95 };
  96
  97 &mdio0 {
  98         status = "okay";
  99
 100         phy0: ethernet-phy@0 {
 101                 reg = <0>;
 102                 phy-mode = "rgmii";
 103
 104                 qca,ar8327-initvals = <
 105                         0x04 0x07600000 /* PORT0 PAD MODE CTRL */
 106                         0x10 0x80000080 /* POWER_ON_STRAP */
 107                         0x50 0xc737c737 /* LED_CTRL0 */
 108                         0x54 0x00000000 /* LED_CTRL1 */
 109                         0x58 0x00000000 /* LED_CTRL2 */
 110                         0x5c 0x0030c300 /* LED_CTRL3 */
 111                         0x7c 0x0000007e /* PORT0_STATUS */
 112                         >;
 113         };
 114 };
 115
 116 &eth0 {
 117         status = "okay";
 118
 119         /* default for ar934x, except for 1000M */
 120         pll-data = <0x06000000 0x00000101 0x00001616>;
 121
 122         nvmem-cells = <&macaddr_uboot_1fc00 0>;
 123         nvmem-cell-names = "mac-address";
 124
 125         phy-mode = "rgmii";
 126         phy-handle = <&phy0>;
 127 };