target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz3490.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/leds/common.h>
   4
   5 #include "vr9_avm_fritzxx90.dtsi"
   6
   7 / {
   8         compatible = "avm,fritz3490", "lantiq,xway", "lantiq,vr9";
   9         model = "AVM FRITZ!Box 3490";
  10 };
  11
  12 &aliases {
  13         led-dsl = &led_info_green;
  14         led-internet = &led_internet;
  15         led-wifi = &led_wifi;
  16 };
  17
  18 &leds {
  19         led_lan: lan {
  20                 function = LED_FUNCTION_LAN;
  21                 color = <LED_COLOR_ID_GREEN>;
  22                 gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
  23         };
  24
  25         led_wifi: wifi {
  26                 function = LED_FUNCTION_WLAN;
  27                 color = <LED_COLOR_ID_GREEN>;
  28                 gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
  29         };
  30
  31         led_internet: internet {
  32                 label = "green:internet";
  33                 gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
  34         };
  35 };
  36
  37 &gswip_mdio {
  38         phy0: ethernet-phy@0 {
  39                 reg = <0x00>;
  40                 reset-gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
  41         };
  42
  43         phy1: ethernet-phy@1 {
  44                 reg = <0x01>;
  45                 reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
  46         };
  47
  48         phy11: ethernet-phy@11 {
  49                 reg = <0x11>;
  50         };
  51
  52         phy13: ethernet-phy@13 {
  53                 reg = <0x13>;
  54         };
  55 };
  56
  57 &gswip_ports {
  58         port@0 {
  59                 reg = <0>;
  60                 label = "lan3";
  61                 phy-mode = "rgmii-rxid";
  62                 phy-handle = <&phy0>;
  63         };
  64
  65         port@1 {
  66                 reg = <1>;
  67                 label = "lan4";
  68                 phy-mode = "rgmii-rxid";
  69                 phy-handle = <&phy1>;
  70         };
  71
  72         port@2 {
  73                 reg = <2>;
  74                 label = "lan2";
  75                 phy-mode = "internal";
  76                 phy-handle = <&phy11>;
  77         };
  78
  79         port@4 {
  80                 reg = <4>;
  81                 label = "lan1";
  82                 phy-mode = "internal";
  83                 phy-handle = <&phy13>;
  84         };
  85 };