target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz5490.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/leds/common.h>
   4
   5 #include "vr9_avm_fritzxx90.dtsi"
   6
   7 / {
   8         compatible = "avm,fritz5490", "lantiq,xway", "lantiq,vr9";
   9         model = "AVM FRITZ!Box 5490/5491";
  10 };
  11
  12 &aliases {
  13         led-dsl = &led_info_green;
  14         led-internet = &led_internet;
  15         led-wifi = &led_wifi;
  16 };
  17
  18 &leds {
  19         led_fiber: fiber {
  20                 label = "green:fiber";
  21                 gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
  22         };
  23
  24         led_wifi: wifi {
  25                 function = LED_FUNCTION_WLAN;
  26                 color = <LED_COLOR_ID_GREEN>;
  27                 gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
  28         };
  29
  30         led_internet: internet {
  31                 label = "green:internet";
  32                 gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
  33         };
  34 };
  35
  36 &gswip_mdio {
  37         phy5: ethernet-phy@5 {
  38                 reg = <0x05>;
  39         };
  40
  41         phy6: ethernet-phy@6 {
  42                 reg = <0x06>;
  43                 reset-gpios = <&gpio 32 GPIO_ACTIVE_LOW>;
  44         };
  45
  46         phy9: ethernet-phy@9 {
  47                 reg = <0x09>;
  48         };
  49 };
  50
  51 &gswip_ports {
  52         port@0 {
  53                 reg = <0>;
  54                 label = "wan";
  55                 phy-mode = "rgmii";
  56                 phy-handle = <&phy6>;
  57         };
  58
  59         port@2 {
  60                 reg = <2>;
  61                 label = "lan2";
  62                 phy-mode = "internal";
  63                 phy-handle = <&phy5>;
  64         };
  65
  66         port@4 {
  67                 reg = <4>;
  68                 label = "lan1";
  69                 phy-mode = "internal";
  70                 phy-handle = <&phy9>;
  71         };
  72 };