target/linux/ramips/dts/mt7620a_tplink_archer-c2-v1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/leds/common.h>
   4
   5 #include "mt7620a_tplink_8m.dtsi"
   6
   7 / {
   8         compatible = "tplink,archer-c2-v1", "ralink,mt7620a-soc";
   9         model = "TP-Link Archer C2 v1";
  10
  11         aliases {
  12                 led-boot = &led_wps;
  13                 led-failsafe = &led_wps;
  14                 led-running = &led_wps;
  15                 led-upgrade = &led_wps;
  16         };
  17
  18
  19         leds {
  20                 compatible = "gpio-leds";
  21
  22                 led-0 {
  23                         function = LED_FUNCTION_LAN;
  24                         color = <LED_COLOR_ID_GREEN>;
  25                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  26                 };
  27
  28                 led-1 {
  29                         function = LED_FUNCTION_USB;
  30                         color = <LED_COLOR_ID_GREEN>;
  31                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  32                         trigger-sources = <&ohci_port1>, <&ehci_port1>;
  33                         linux,default-trigger = "usbport";
  34                 };
  35
  36                 led_wps: led-2 {
  37                         function = LED_FUNCTION_WPS;
  38                         color = <LED_COLOR_ID_GREEN>;
  39                         gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
  40                 };
  41
  42                 led-3 {
  43                         function = LED_FUNCTION_WAN;
  44                         color = <LED_COLOR_ID_GREEN>;
  45                         gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
  46                 };
  47
  48                 led-4 {
  49                         function = LED_FUNCTION_WLAN;
  50                         color = <LED_COLOR_ID_GREEN>;
  51                         gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
  52                         linux,default-trigger = "phy1tpt";
  53                 };
  54         };
  55
  56         rtl8367rb {
  57                 compatible = "realtek,rtl8367b";
  58                 realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
  59                 mii-bus = <&mdio0>;
  60         };
  61 };
  62
  63 &state_default {
  64         gpio {
  65                 groups = "i2c", "uartf", "wled", "ephy", "spi refclk";
  66                 function = "gpio";
  67         };
  68 };
  69
  70 &ethernet {
  71         pinctrl-names = "default";
  72         pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
  73
  74         nvmem-cells = <&macaddr_rom_f100 0>;
  75         nvmem-cell-names = "mac-address";
  76
  77         port@5 {
  78                 status = "okay";
  79                 mediatek,fixed-link = <1000 1 1 1>;
  80                 phy-mode = "rgmii";
  81         };
  82
  83         mdio0: mdio-bus {
  84                 status = "okay";
  85         };
  86 };
  87
  88
  89 &wmac {
  90         nvmem-cells = <&eeprom_radio_0>, <&macaddr_rom_f100 0>;
  91         nvmem-cell-names = "eeprom", "mac-address";
  92 };
  93
  94 &wifi {
  95         nvmem-cells = <&eeprom_radio_8000>, <&macaddr_rom_f100 (-1)>;
  96         nvmem-cell-names = "eeprom", "mac-address";
  97 };