target/linux/ramips/dts/mt7620a_tplink_archer-c20-v1.dts

   1 #include <dt-bindings/leds/common.h>
   2
   3 #include "mt7620a_tplink_8m.dtsi"
   4
   5 / {
   6         compatible = "tplink,archer-c20-v1", "ralink,mt7620a-soc";
   7         model = "TP-Link Archer C20 v1";
   8
   9         aliases {
  10                 led-boot = &led_power;
  11                 led-failsafe = &led_power;
  12                 led-running = &led_power;
  13                 led-upgrade = &led_power;
  14         };
  15
  16         leds {
  17                 compatible = "gpio-leds";
  18
  19                 led-0 {
  20                         function = LED_FUNCTION_LAN;
  21                         color = <LED_COLOR_ID_BLUE>;
  22                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  23                 };
  24
  25                 led_power: led-1 {
  26                         function = LED_FUNCTION_POWER;
  27                         color = <LED_COLOR_ID_BLUE>;
  28                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  29                         default-state = "keep";
  30                 };
  31
  32                 led-2 {
  33                         function = LED_FUNCTION_USB;
  34                         color = <LED_COLOR_ID_BLUE>;
  35                         gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
  36                         trigger-sources = <&ohci_port1>, <&ehci_port1>;
  37                         linux,default-trigger = "usbport";
  38                 };
  39
  40                 led-3 {
  41                         function = LED_FUNCTION_WAN;
  42                         color = <LED_COLOR_ID_BLUE>;
  43                         gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
  44                 };
  45
  46                 led-4 {
  47                         function = LED_FUNCTION_WAN;
  48                         color = <LED_COLOR_ID_ORANGE>;
  49                         gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
  50                 };
  51
  52                 led-5 {
  53                         function = LED_FUNCTION_WLAN_5GHZ;
  54                         color = <LED_COLOR_ID_BLUE>;
  55                         gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
  56                         linux,default-trigger = "phy0tpt";
  57                 };
  58
  59                 led-6 {
  60                         function = LED_FUNCTION_WLAN_2GHZ;
  61                         color = <LED_COLOR_ID_BLUE>;
  62                         gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
  63                         linux,default-trigger = "phy1tpt";
  64                 };
  65
  66                 led-7 {
  67                         function = LED_FUNCTION_WPS;
  68                         color = <LED_COLOR_ID_BLUE>;
  69                         gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
  70                 };
  71         };
  72 };
  73
  74 &state_default {
  75         gpio {
  76                 groups = "i2c", "uartf", "wled", "ephy", "spi refclk", "wdt";
  77                 function = "gpio";
  78         };
  79 };
  80
  81 &wmac {
  82         pinctrl-names = "default", "pa_gpio";
  83         pinctrl-0 = <&pa_pins>;
  84         pinctrl-1 = <&pa_gpio_pins>;
  85
  86         nvmem-cells = <&eeprom_radio_0>, <&macaddr_rom_f100 (-2)>;
  87         nvmem-cell-names = "eeprom", "mac-address";
  88 };
  89
  90 &wifi {
  91         nvmem-cells = <&eeprom_radio_8000>, <&macaddr_rom_f100 (-1)>;
  92         nvmem-cell-names = "eeprom", "mac-address";
  93 };