// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
+
+#include "ar9344.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
-
-#include "ar9344.dtsi"
+#include <dt-bindings/leds/common.h>
/ {
model = "PowerCloud Systems CAP324";
compatible = "pcs,cap324", "qca,ar9344";
aliases {
- serial0 = &uart;
- led-boot = &status;
- led-failsafe = &status;
- led-running = &running;
- led-upgrade = &status;
+ led-boot = &led_power_amber;
+ led-failsafe = &led_power_amber;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_amber;
};
keys {
leds {
compatible = "gpio-leds";
- status: power_amber {
- label = "pcs:amber:power";
+ led_power_amber: power_amber {
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
- running: power_green {
- label = "pcs:green:power";
+ led_power_green: power_green {
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan_amber {
- label = "pcs:amber:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
wlan_green {
- label = "pcs:green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
lan_amber {
- label = "pcs:lan:amber";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_AMBER>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
lan_green {
- label = "pcs:lan:green";
+ function = LED_FUNCTION_LAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
};
clock-frequency = <25000000>;
};
-&uart {
- status = "okay";
-};
-
-&gpio {
- status = "okay";
-};
-
&spi {
- num-cs = <1>;
-
status = "okay";
flash@0 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_art_0: macaddr@0 {
+ compatible = "mac-base";
+ reg = <0x0 0x6>;
+ #nvmem-cell-cells = <1>;
+ };
+ };
};
};
};
ath9k: wifi@0,0 {
compatible = "168c,0030";
reg = <0x0000 0 0 0 0>;
- mtd-mac-address = <&art 0x0>;
- mtd-mac-address-increment = <(-2)>;
+ nvmem-cells = <&macaddr_art_0 (-2)>;
+ nvmem-cell-names = "mac-address";
mtd-cal-data = <&art 0x5000>;
qca,no-eeprom;
- qca,disable-5ghz;
+ ieee80211-freq-limit = <2402000 2482000>;
#gpio-cells = <2>;
gpio-controller;
};
&wmac {
status = "okay";
- qca,disable-2ghz;
+ ieee80211-freq-limit = <4900000 5990000>;
mtd-cal-data = <&art 0x1000>;
- mtd-mac-address = <&art 0x0>;
- mtd-mac-address-increment = <(-1)>;
+ nvmem-cells = <&macaddr_art_0 (-1)>;
+ nvmem-cell-names = "mac-address";
};
&mdio0 {
status = "okay";
- phy-mask = <0>;
-
phy0: ethernet-phy@0 {
reg = <0>;
phy-mode = "rgmii";
/* default for ar934x, except for 1000M */
pll-data = <0x06000000 0x00000101 0x00001616>;
- mtd-mac-address = <&art 0x0>;
+ nvmem-cells = <&macaddr_art_0 0>;
+ nvmem-cell-names = "mac-address";
phy-mode = "rgmii";
phy-handle = <&phy0>;