mediatek: improve reliability of Fidelix/Dosilicon SPI-NAND

[openwrt/openwrt.git] / target / linux / bcm63xx / dts / bcm6328.dtsi

diff --git a/target/linux/bcm63xx/dts/bcm6328.dtsi b/target/linux/bcm63xx/dts/bcm6328.dtsi
deleted file mode 100644 (file)
index f62fad7..0000000
--- a/target/linux/bcm63xx/dts/bcm6328.dtsi
+++ /dev/null
@@ -1,219 +0,0 @@
-/ {
-       #address-cells = <1>;
-       #size-cells = <1>;
-       compatible = "brcm,bcm6328";
-
-       aliases {
-               nflash = &nflash;
-               pinctrl = &pinctrl;
-               serial0 = &uart0;
-               serial1 = &uart1;
-               spi1 = &hsspi;
-       };
-
-       cpus {
-               #address-cells = <1>;
-               #size-cells = <0>;
-
-               cpu@0 {
-                       compatible = "brcm,bmips4350", "mips,mips4Kc";
-                       device_type = "cpu";
-                       reg = <0>;
-               };
-       };
-
-       cpu_intc: interrupt-controller {
-               #address-cells = <0>;
-               compatible = "mti,cpu-interrupt-controller";
-
-               interrupt-controller;
-               #interrupt-cells = <1>;
-       };
-
-       memory { device_type = "memory"; reg = <0 0>; };
-
-       ubus@10000000 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               ranges;
-               compatible = "simple-bus";
-               interrupt-parent = <&periph_intc>;
-
-               ext_intc: interrupt-controller@10000018 {
-                       compatible = "brcm,bcm6345-ext-intc";
-                       reg = <0x10000018 0x4>;
-
-                       interrupt-controller;
-                       #interrupt-cells = <2>;
-
-                       interrupts = <24>, <25>, <26>, <27>;
-               };
-
-               periph_intc: interrupt-controller@10000020 {
-                       compatible = "brcm,bcm6345-l1-intc";
-                       reg = <0x10000020 0x10>;
-
-                       interrupt-controller;
-                       #interrupt-cells = <1>;
-
-                       interrupt-parent = <&cpu_intc>;
-                       interrupts = <2>;
-               };
-
-               pinctrl: pin-controller@10000080 {
-                       compatible = "brcm,bcm6328-pinctrl";
-                       reg = <0x10000080 0x8>,
-                             <0x10000088 0x8>,
-                             <0x10000098 0x4>,
-                             <0x1000009c 0xc>;
-                       reg-names = "dirout", "dat", "mode", "mux";
-
-                       gpio-controller;
-                       #gpio-cells = <2>;
-
-                       interrupt-parent = <&ext_intc>;
-                       interrupts = <3 0>, <2 0>, <0 0>, <1 0>;
-                       interrupt-names = "gpio12", "gpio15",
-                                         "gpio23", "gpio24";
-
-                       pinctrl_serial_led: serial_led {
-                               pinctrl_serial_led_data: serial_led_data {
-                                       function = "serial_led_data";
-                                       pins = "gpio6";
-                               };
-
-                               pinctrl_serial_led_clk: serial_led_clk {
-                                       function = "serial_led_clk";
-                                       pins = "gpio7";
-                               };
-                       };
-
-                       pinctrl_inet_act_led: inet_act_led {
-                               function = "inet_act_led";
-                               pins = "gpio11";
-                       };
-
-                       pinctrl_pcie_clkreq: pcie_clkreq {
-                               function = "pcie_clkreq";
-                               pins = "gpio16";
-                       };
-
-                       pinctrl_ephy0_spd_led: ephy0_spd_led {
-                               function = "led";
-                               pins = "gpio17";
-                       };
-
-                       pinctrl_ephy1_spd_led: ephy1_spd_led {
-                               function = "led";
-                               pins = "gpio18";
-                       };
-
-                       pinctrl_ephy2_spd_led: ephy2_spd_led {
-                               function = "led";
-                               pins = "gpio19";
-                       };
-
-                       pinctrl_ephy3_spd_led: ephy3_spd_led {
-                               function = "led";
-                               pins = "gpio20";
-                       };
-
-                       pinctrl_ephy0_act_led: ephy0_act_led {
-                               function = "ephy0_act_led";
-                               pins = "gpio25";
-                       };
-
-                       pinctrl_ephy1_act_led: ephy1_act_led {
-                               function = "ephy1_act_led";
-                               pins = "gpio26";
-                       };
-
-                       pinctrl_ephy2_act_led: ephy2_act_led {
-                               function = "ephy2_act_led";
-                               pins = "gpio27";
-                       };
-
-                       pinctrl_ephy3_act_led: ephy3_act_led {
-                               function = "ephy3_act_led";
-                               pins = "gpio28";
-                       };
-
-                       pinctrl_hsspi_cs1: hsspi_cs1 {
-                               function = "hsspi_cs1";
-                               pins = "hsspi_cs1";
-                       };
-
-                       pinctrl_usb_port1_device: usb_port1_device {
-                               function = "usb_device_port";
-                               pins = "usb_port1";
-                       };
-
-                       pinctrl_usb_port1_host: usb_port1_host {
-                               function = "usb_host_port";
-                               pins = "usb_port1";
-                       };
-               };
-
-               uart0: serial@10000100 {
-                       compatible = "brcm,bcm6345-uart";
-                       reg = <0x10000100 0x18>;
-
-                       interrupt-parent = <&periph_intc>;
-                       interrupts = <28>;
-
-                       /* clocks = <&periph_clk>; */
-                       /* clock-names = "refclk"; */
-
-                       status = "disabled";
-               };
-
-               uart1: serial@10000120 {
-                       compatible = "brcm,bcm6345-uart";
-                       reg = <0x10000120 0x18>;
-
-                       interrupt-parent = <&periph_intc>;
-                       interrupts = <39>;
-
-                       /* clocks = <&periph_clk>; */
-                       /* clock-names = "refclk"; */
-
-                       status = "disabled";
-               };
-
-               nflash: nand@10000200 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       compatible = "brcm,nand-bcm6368",
-                                    "brcm,brcmnand-v2.2",
-                                    "brcm,brcmnand";
-                       reg = <0x10000200 0x180>,
-                             <0x10000400 0x200>,
-                             <0x10000070 0x10>;
-                       reg-names = "nand",
-                                   "nand-cache",
-                                   "nand-int-base";
-
-                       interrupt-parent = <&periph_intc>;
-                       interrupts = <0>;
-
-                       status = "disabled";
-               };
-
-               leds: led-controller@10000800 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       compatible = "brcm,bcm6328-leds";
-                       reg = <0x10000800 0x24>;
-                       status = "disabled";
-               };
-
-               hsspi: spi@10001000 {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       compatible = "brcm,bcm6328-hsspi";
-                       reg = <0x10001000 0x600>;
-                       interrupts = <29>;
-                       /* clocks = <&clkctl 9>; */
-               };
-       };
-};