mediatek: filogic: Add support for Wavlink WL-WN586X3

[openwrt/openwrt.git] / target / linux / ramips / dts / mt7620a_zbtlink_zbt-we1026.dtsi

diff --git a/target/linux/ramips/dts/mt7620a_zbtlink_zbt-we1026.dtsi b/target/linux/ramips/dts/mt7620a_zbtlink_zbt-we1026.dtsi
index cdbdfbd38c25c99bfb0ba5f8090cd03c1a5baba2..b2cb08473bda8169c0163c0b45a3f9724a548a33 100644 (file)
--- a/target/linux/ramips/dts/mt7620a_zbtlink_zbt-we1026.dtsi
+++ b/target/linux/ramips/dts/mt7620a_zbtlink_zbt-we1026.dtsi
@@ -30,7 +30,7 @@
 &spi0 {
        status = "okay";
 
-       flash@0 {
+       flash0: flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
                spi-max-frequency = <10000000>;
@@ -52,10 +52,28 @@
                                read-only;
                        };
 
-                       factory: partition@40000 {
+                       partition@40000 {
                                label = "factory";
                                reg = <0x40000 0x10000>;
                                read-only;
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       eeprom_factory_0: eeprom@0 {
+                                               reg = <0x0 0x200>;
+                                       };
+
+                                       eeprom_factory_8000: eeprom@8000 {
+                                               reg = <0x8000 0x200>;
+                                       };
+
+                                       macaddr_factory_28: macaddr@28 {
+                                               reg = <0x28 0x6>;
+                                       };
+                               };
                        };
 
                        firmware: partition@50000 {
@@ -92,7 +110,8 @@
 };
 
 &wmac {
-       ralink,mtd-eeprom = <&factory 0x0>;
+       nvmem-cells = <&eeprom_factory_0>;
+       nvmem-cell-names = "eeprom";
 };
 
 &state_default {
@@ -101,13 +120,3 @@
                function = "gpio";
        };
 };
-
-&factory {
-       compatible = "nvmem-cells";
-       #address-cells = <1>;
-       #size-cells = <1>;
-
-       macaddr_factory_28: macaddr@28 {
-               reg = <0x28 0x6>;
-       };
-};