mvebu: disable polling delay for passive trip point for puzzle thermal
[openwrt/openwrt.git] / target / linux / ramips / dts / mt7621_youku_yk-l2.dts
index 627188873d08a6126a427ce7d2ee79e6fcc0df30..9d2491f6348743a1529f3d5362e0e172b9b96772 100644 (file)
@@ -4,6 +4,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 
 / {
        compatible = "youku,yk-l2", "mediatek,mt7621-soc";
                compatible = "gpio-leds";
 
                led_power: power {
-                       label = "blue:power";
+                       function = LED_FUNCTION_POWER;
+                       color = <LED_COLOR_ID_BLUE>;
                        gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
                        default-state = "on";
                };
 
                led_wps: wps {
-                       label = "blue:wps";
+                       function = LED_FUNCTION_WPS;
+                       color = <LED_COLOR_ID_BLUE>;
                        gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
                };
 
                usb {
-                       label = "blue:usb";
+                       function = LED_FUNCTION_USB;
+                       color = <LED_COLOR_ID_BLUE>;
                        gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
                        trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>;
                        linux,default-trigger = "usbport";
                                read-only;
                        };
 
-                       factory: partition@40000 {
+                       partition@40000 {
                                label = "factory";
                                reg = <0x40000 0x10000>;
                                read-only;
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       eeprom_factory_0: eeprom@0 {
+                                               reg = <0x0 0x400>;
+                                       };
+
+                                       eeprom_factory_8000: eeprom@8000 {
+                                               reg = <0x8000 0x200>;
+                                       };
+
+                                       macaddr_factory_e000: macaddr@e000 {
+                                               reg = <0xe000 0x6>;
+                                       };
+
+                                       macaddr_factory_e006: macaddr@e006 {
+                                               reg = <0xe006 0x6>;
+                                       };
+                               };
                        };
 
                        partition@50000 {
-                               compatible = "denx,uimage";
+                               compatible = "openwrt,uimage", "denx,uimage";
                                label = "firmware";
+                               openwrt,ih-magic = <0x12291000>;
                                reg = <0x50000 0xfb0000>;
                        };
                };
        wifi@0,0 {
                compatible = "pci14c3,7603";
                reg = <0x0000 0 0 0 0>;
-               mediatek,mtd-eeprom = <&factory 0x0000>;
+               nvmem-cells = <&eeprom_factory_0>;
+               nvmem-cell-names = "eeprom";
                ieee80211-freq-limit = <2400000 2500000>;
                led {
                        led-active-low;
        wifi@0,0 {
                compatible = "pci14c3,7662";
                reg = <0x0000 0 0 0 0>;
-               mediatek,mtd-eeprom = <&factory 0x8000>;
+               nvmem-cells = <&eeprom_factory_8000>;
+               nvmem-cell-names = "eeprom";
                ieee80211-freq-limit = <5000000 6000000>;
                led {
                        led-sources = <2>;
 };
 
 &gmac0 {
-       mtd-mac-address = <&factory 0xe000>;
+       nvmem-cells = <&macaddr_factory_e000>;
+       nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+       status = "okay";
+       label = "wan";
+       phy-handle = <&ethphy4>;
+
+       nvmem-cells = <&macaddr_factory_e006>;
+       nvmem-cell-names = "mac-address";
+};
+
+&ethphy4 {
+       /delete-property/ interrupts;
 };
 
 &switch0 {
                        status = "okay";
                        label = "lan4";
                };
-
-               port@4 {
-                       status = "okay";
-                       label = "wan";
-                       mtd-mac-address = <&factory 0xe006>;
-               };
        };
 };