#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
/ {
compatible = "youku,yk-l2", "mediatek,mt7621-soc";
compatible = "gpio-leds";
led_power: power {
- label = "blue:power";
+ function = LED_FUNCTION_POWER;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
default-state = "on";
};
led_wps: wps {
- label = "blue:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
usb {
- label = "blue:usb";
+ function = LED_FUNCTION_USB;
+ color = <LED_COLOR_ID_BLUE>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>;
linux,default-trigger = "usbport";
read-only;
};
- factory: partition@40000 {
- compatible = "nvmem-cells";
+ partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
- #address-cells = <1>;
- #size-cells = <1>;
read-only;
- eeprom_factory_0: eeprom@0 {
- reg = <0x0 0x400>;
- };
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
- macaddr_factory_e000: macaddr@e000 {
- reg = <0xe000 0x6>;
- };
+ eeprom_factory_0: eeprom@0 {
+ reg = <0x0 0x400>;
+ };
+
+ eeprom_factory_8000: eeprom@8000 {
+ reg = <0x8000 0x200>;
+ };
- macaddr_factory_e006: macaddr@e006 {
- reg = <0xe006 0x6>;
+ macaddr_factory_e000: macaddr@e000 {
+ reg = <0xe000 0x6>;
+ };
+
+ macaddr_factory_e006: macaddr@e006 {
+ reg = <0xe006 0x6>;
+ };
};
};
wifi@0,0 {
compatible = "pci14c3,7662";
reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
+ nvmem-cells = <&eeprom_factory_8000>;
+ nvmem-cell-names = "eeprom";
ieee80211-freq-limit = <5000000 6000000>;
led {
led-sources = <2>;
nvmem-cell-names = "mac-address";
};
-&mdio {
- ethphy4: ethernet-phy@4 {
- reg = <4>;
- };
+ðphy4 {
+ /delete-property/ interrupts;
};
&switch0 {