mvebu: disable polling delay for passive trip point for puzzle thermal

[openwrt/openwrt.git] / target / linux / ramips / dts / rt3050_huawei_d105.dts

diff --git a/target/linux/ramips/dts/rt3050_huawei_d105.dts b/target/linux/ramips/dts/rt3050_huawei_d105.dts
index 4333ed0a224929fc70420e0a64d27e2e9a76ca5f..6a26e0d513cf8cc034c85ca77369a2395d55fd2f 100644 (file)
--- a/target/linux/ramips/dts/rt3050_huawei_d105.dts
+++ b/target/linux/ramips/dts/rt3050_huawei_d105.dts
@@ -2,6 +2,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 
 / {
        compatible = "huawei,d105", "ralink,rt3050-soc";
@@ -37,20 +38,23 @@
                                read-only;
                        };
 
-                       factory: partition@40000 {
-                               compatible = "nvmem-cells";
+                       partition@40000 {
                                label = "factory";
                                reg = <0x40000 0x10000>;
-                               #address-cells = <1>;
-                               #size-cells = <1>;
                                read-only;
 
-                               eeprom_factory_0: eeprom@0 {
-                                       reg = <0x0 0x200>;
-                               };
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       eeprom_factory_0: eeprom@0 {
+                                               reg = <0x0 0x200>;
+                                       };
 
-                               macaddr_factory_4: macaddr@4 {
-                                       reg = <0x4 0x6>;
+                                       macaddr_factory_4: macaddr@4 {
+                                               reg = <0x4 0x6>;
+                                       };
                                };
                        };
 
@@ -66,12 +70,14 @@
                compatible = "gpio-leds";
 
                led_power: power {
-                       label = "red:power";
+                       function = LED_FUNCTION_POWER;
+                       color = <LED_COLOR_ID_RED>;
                        gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
                };
 
                usb {
-                       label = "green:usb";
+                       function = LED_FUNCTION_USB;
+                       color = <LED_COLOR_ID_GREEN>;
                        gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
                        trigger-sources = <&otg_port1>;
                        linux,default-trigger = "usbport";