2024-10-21 | Matthew Hagan | bcm53xx: MR26,MR32: use REQUIRE_IMAGE_METADATA bcm53xx: MR26,MR32: use REQUIRE_IMAGE_METADATA ...E_IMAGE_METADATA=1" requirement for the MR26 and |
commit | commitdiff | tree |
2023-05-18 | Christian Lamparter | nu801: add kmod-leds-uleds to MR26 + MR18 nu801: add kmod-leds-uleds to MR26 + MR18 support for MR18 and MR26 was developped before Thankfully, the MR26 and MR18 can just add the uleds |
commit | commitdiff | tree |
2022-08-23 | Petr Štetiar | kernel: bump 5.15 to 5.15.62 ...072-next-ARM_dts_BCM53015-add-mr26.patch |
commit | commitdiff | tree |
2022-08-23 | Petr Štetiar | kernel: bump 5.10 to 5.10.137 ...081-next-ARM_dts_BCM53015-add-mr26.patch |
commit | commitdiff | tree |
2022-07-17 | Christian Lamparter | nu801: fix DEPENDS on bcm53xx Fixes: be1761fa1488 ("nu801: add MR26 to the table") |
commit | commitdiff | tree |
2022-07-15 | Christian Lamparter | bcm53xx: add support for Meraki MR26 bcm53xx: add support for Meraki MR26 Meraki MR26 is an EOL wireless access point... This flashing procedure for the MR26 was tested with firmware: <https://openwrt.org/toh/meraki/mr26> Download the openwrt-meraki-mr26 initramfs file from openwrt.org and rename it to something simple like mr26.bin. Then put it into the tftp's 1. Disassemble the MR26 device by removing all screws... tftpboot ${meraki_loadaddr} mr26.bin; bootm |
commit | commitdiff | tree |
2022-07-15 | Christian Lamparter | nu801: add MR26 to the table nu801: add MR26 to the table The MR26 uses a NU801 for the RGB-Leds... |
commit | commitdiff | tree |