linux: ar71xx: add support for Mikrotik Routerboard RB493G
[openwrt/openwrt.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-tl-wa901nd-v2.c
1 /*
2 * TP-LINK TL-WA901ND v2 board support
3 *
4 * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
5 * Copyright (C) 2010 Pieter Hollants <pieter@hollants.com>
6 * Copyright (C) 2011 Jonathan Bennett <jbscience87@gmail.com>
7 *
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License version 2 as published
10 * by the Free Software Foundation.
11 */
12
13 #include <linux/mtd/mtd.h>
14 #include <linux/mtd/partitions.h>
15
16 #include <asm/mach-ar71xx/ar71xx.h>
17
18 #include "machtype.h"
19 #include "devices.h"
20 #include "dev-m25p80.h"
21 #include "dev-gpio-buttons.h"
22 #include "dev-leds-gpio.h"
23 #include "dev-ar9xxx-wmac.h"
24
25 #define TL_WA901ND_V2_GPIO_LED_QSS 4
26 #define TL_WA901ND_V2_GPIO_LED_SYSTEM 2
27 #define TL_WA901ND_V2_GPIO_LED_WLAN 9
28
29
30 #define TL_WA901ND_V2_GPIO_BTN_RESET 3
31 #define TL_WA901ND_V2_GPIO_BTN_QSS 7
32
33 #define TL_WA901ND_V2_KEYS_POLL_INTERVAL 20 /* msecs */
34 #define TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL \
35 (3 * TL_WA901ND_V2_KEYS_POLL_INTERVAL)
36 #ifdef CONFIG_MTD_PARTITIONS
37 static struct mtd_partition tl_wa901nd_v2_partitions[] = {
38 {
39 .name = "u-boot",
40 .offset = 0,
41 .size = 0x020000,
42 .mask_flags = MTD_WRITEABLE,
43 }, {
44 .name = "kernel",
45 .offset = 0x020000,
46 .size = 0x140000,
47 }, {
48 .name = "rootfs",
49 .offset = 0x160000,
50 .size = 0x290000,
51 }, {
52 .name = "art",
53 .offset = 0x3f0000,
54 .size = 0x010000,
55 .mask_flags = MTD_WRITEABLE,
56 }, {
57 .name = "firmware",
58 .offset = 0x020000,
59 .size = 0x3d0000,
60 }
61 };
62 #endif /* CONFIG_MTD_PARTITIONS */
63
64 static struct flash_platform_data tl_wa901nd_v2_flash_data = {
65 #ifdef CONFIG_MTD_PARTITIONS
66 .parts = tl_wa901nd_v2_partitions,
67 .nr_parts = ARRAY_SIZE(tl_wa901nd_v2_partitions),
68 #endif
69 };
70
71 static struct gpio_led tl_wa901nd_v2_leds_gpio[] __initdata = {
72 {
73 .name = "tl-wa901nd-v2:green:system",
74 .gpio = TL_WA901ND_V2_GPIO_LED_SYSTEM,
75 .active_low = 1,
76 }, {
77 .name = "tl-wa901nd-v2:green:qss",
78 .gpio = TL_WA901ND_V2_GPIO_LED_QSS,
79 }, {
80 .name = "tl-wa901nd-v2:green:wlan",
81 .gpio = TL_WA901ND_V2_GPIO_LED_WLAN,
82 .active_low = 1,
83 }
84 };
85
86 static struct gpio_keys_button tl_wa901nd_v2_gpio_keys[] __initdata = {
87 {
88 .desc = "reset",
89 .type = EV_KEY,
90 .code = KEY_RESTART,
91 .debounce_interval = TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL,
92 .gpio = TL_WA901ND_V2_GPIO_BTN_RESET,
93 .active_low = 1,
94 }, {
95 .desc = "qss",
96 .type = EV_KEY,
97 .code = KEY_WPS_BUTTON,
98 .debounce_interval = TL_WA901ND_V2_KEYS_DEBOUNCE_INTERVAL,
99 .gpio = TL_WA901ND_V2_GPIO_BTN_QSS,
100 .active_low = 1,
101 }
102 };
103
104 static void __init tl_wa901nd_v2_setup(void)
105 {
106 u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
107 u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
108
109 ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
110
111 ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
112 ar71xx_eth0_data.phy_mask = 0x00001000;
113 ar71xx_add_device_mdio(0x0);
114
115 ar71xx_eth0_data.reset_bit = RESET_MODULE_GE0_MAC |
116 RESET_MODULE_GE0_PHY;
117 ar71xx_add_device_eth(0);
118
119 ar71xx_add_device_m25p80(&tl_wa901nd_v2_flash_data);
120
121 ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wa901nd_v2_leds_gpio),
122 tl_wa901nd_v2_leds_gpio);
123
124 ar71xx_register_gpio_keys_polled(-1, TL_WA901ND_V2_KEYS_POLL_INTERVAL,
125 ARRAY_SIZE(tl_wa901nd_v2_gpio_keys),
126 tl_wa901nd_v2_gpio_keys);
127
128 ar9xxx_add_device_wmac(eeprom, mac);
129 }
130
131 MIPS_MACHINE(AR71XX_MACH_TL_WA901ND_V2, "TL-WA901ND-v2",
132 "TP-LINK TL-WA901ND v2", tl_wa901nd_v2_setup);