target/linux/bcm53xx/base-files/etc/board.d/02_network

   1 #!/bin/sh
   2 #
   3 # Copyright (C) 2011 OpenWrt.org
   4 #
   5
   6 . /lib/functions/uci-defaults.sh
   7
   8 board_config_update
   9
  10 board=$(cat /proc/device-tree/compatible | tr '\0' '\t' | cut -f 1)
  11
  12 case "$board" in
  13 tenda,ac9)
  14         ucidef_add_switch "switch0" \
  15                 "1:lan" "2:lan" "3:lan" "4:lan" "8@eth0" "0:wan" "5@eth1"
  16         board_config_flush
  17         exit 0
  18         ;;
  19 esac
  20
  21 case "$board" in
  22 asus,rt-ac87u)
  23         ifname=eth1
  24         ;;
  25 dlink,dir-885l | \
  26 netgear,r7900 | \
  27 netgear,r8000 | \
  28 netgear,r8500)
  29
  30         ifname=eth2
  31         ;;
  32 *)
  33         ifname=eth0
  34         ;;
  35 esac
  36
  37 # Workaround for devices using eth2 connected to (CPU) switch port 8
  38 case "$board" in
  39 dlink,dir-885l | \
  40 netgear,r7900 | \
  41 netgear,r8000 | \
  42 netgear,r8500)
  43         ifname=eth0
  44         ucidef_add_switch "switch0" \
  45                 "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5t@$ifname"
  46         board_config_flush
  47         exit 0
  48         ;;
  49 esac
  50
  51 # NVRAM entries may contain unsorted ports, e.g. Netgear R6250 uses
  52 # vlan1ports=3 2 1 0 5*
  53 # vlan2ports=4 5u
  54 # and early Netgear R8000 was using
  55 # vlan1ports=3 2 1 0 5 7 8*
  56 vlan1ports="$(echo $(nvram get vlan1ports | tr " " "\n" | sort))"
  57 vlan2ports="$(echo $(nvram get vlan2ports | tr " " "\n" | sort))"
  58 if echo "$vlan1ports" | egrep -q "^1 2 3 4 5" && \
  59    echo "$vlan2ports" | egrep -q "^0 5"; then
  60         ucidef_add_switch "switch0" \
  61                 "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5t@$ifname"
  62 elif echo "$vlan1ports" | egrep -q "^1 2 3 5 7" && \
  63      echo "$vlan2ports" | egrep -q "^0 7"; then
  64         ucidef_add_switch "switch0" \
  65                 "1:lan" "2:lan" "3:lan" "5:lan" "0:wan" "7t@$ifname"
  66 elif echo "$vlan1ports" | egrep -q "^0 1 2 3 5 7 8" && \
  67      echo "$vlan2ports" | egrep -q "^4 8"; then
  68         ucidef_add_switch "switch0" \
  69                 "0:lan" "1:lan" "2:lan" "3:lan" "5:lan" "7:lan" "4:wan" "8t@$ifname"
  70 else
  71         ucidef_add_switch "switch0" \
  72                 "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5t@$ifname"
  73 fi
  74
  75 board_config_flush
  76
  77 exit 0