target/linux/ramips/dts/MZK-EX750NP.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "ralink,mt7620a-soc";
   9         model = "Planex MZK-EX750NP";
  10
  11         gpio-leds {
  12                 compatible = "gpio-leds";
  13
  14                 power {
  15                         label = "mzk-ex750np:red:power";
  16                         gpios = <&gpio0 14 1>;
  17                 };
  18
  19                 wifi {
  20                         label = "mzk-ex750np:red:wifi";
  21                         gpios = <&gpio3 0 1>;
  22                 };
  23
  24                 wps {
  25                         label = "mzk-ex750np:green:wps";
  26                         gpios = <&gpio0 10 1>;
  27                 };
  28
  29                 rep {
  30                         label = "mzk-ex750np:blue:rep";
  31                         gpios = <&gpio2 16 1>;
  32                 };
  33
  34                 wifi1 {
  35                         label = "mzk-ex750np:blue:wifi1";
  36                         gpios = <&gpio2 19 1>;
  37                 };
  38
  39                 wifi2 {
  40                         label = "mzk-ex750np:blue:wifi2";
  41                         gpios = <&gpio2 18 1>;
  42                 };
  43
  44                 wifi3 {
  45                         label = "mzk-ex750np:blue:wifi3";
  46                         gpios = <&gpio2 17 1>;
  47                 };
  48         };
  49
  50         gpio-keys-polled {
  51                 compatible = "gpio-keys-polled";
  52                 #address-cells = <1>;
  53                 #size-cells = <0>;
  54                 poll-interval = <20>;
  55
  56                 reset {
  57                         label = "reset";
  58                         gpios = <&gpio0 9 1>;
  59                         linux,code = <KEY_RESTART>;
  60                 };
  61
  62                 wps {
  63                         label = "wps";
  64                         gpios = <&gpio0 13 0>;
  65                         linux,code = <KEY_RFKILL>;
  66                 };
  67         };
  68 };
  69
  70 &gpio2 {
  71         status = "okay";
  72 };
  73
  74 &gpio3 {
  75         status = "okay";
  76 };
  77
  78 &spi0 {
  79         status = "okay";
  80
  81         m25p80@0 {
  82                 #address-cells = <1>;
  83                 #size-cells = <1>;
  84                 compatible = "jedec,spi-nor";
  85                 reg = <0>;
  86                 spi-max-frequency = <10000000>;
  87
  88                 partition@0 {
  89                         label = "u-boot";
  90                         reg = <0x0 0x30000>;
  91                         read-only;
  92                 };
  93
  94                 partition@30000 {
  95                         label = "u-boot-env";
  96                         reg = <0x30000 0x10000>;
  97                         read-only;
  98                 };
  99
 100                 factory: partition@40000 {
 101                         label = "factory";
 102                         reg = <0x40000 0x10000>;
 103                         read-only;
 104                 };
 105
 106                 partition@50000 {
 107                         label = "firmware";
 108                         reg = <0x50000 0x730000>;
 109                 };
 110
 111                 partition@780000 {
 112                         label = "Udata";
 113                         reg = <0x780000 0x80000>;
 114                 };
 115         };
 116 };
 117
 118 &pinctrl {
 119         state_default: pinctrl0 {
 120                 gpio {
 121                         ralink,group = "uartf", "nd_sd", "rgmii2", "wled";
 122                         ralink,function = "gpio";
 123                 };
 124         };
 125 };
 126
 127 &ethernet {
 128         pinctrl-names = "default";
 129         pinctrl-0 = <&ephy_pins>;
 130         mtd-mac-address = <&factory 0x4>;
 131         mediatek,portmap = "llllw";
 132 };
 133
 134 &wmac {
 135         ralink,mtd-eeprom = <&factory 0>;
 136 };
 137
 138 &pcie {
 139         status = "okay";
 140
 141         pcie-bridge {
 142                 mt76@0,0 {
 143                         reg = <0x0000 0 0 0 0>;
 144                         device_type = "pci";
 145                         mediatek,mtd-eeprom = <&factory 0x8000>;
 146                 };
 147         };
 148 };