target/linux/ramips/dts/OY-0001.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "ralink,mt7620a-soc";
   9         model = "OY-0001";
  10
  11         chosen {
  12                 bootargs = "console=ttyS0,115200";
  13         };
  14
  15         gpio-leds {
  16                 compatible = "gpio-leds";
  17
  18                 powerled {
  19                         label = "oy-0001:green:power";
  20                         gpios = <&gpio0 9 1>;
  21                 };
  22
  23                 wifiled {
  24                         label = "oy-0001:green:wifi";
  25                         gpios = <&gpio3 0 1>;
  26                 };
  27         };
  28
  29         gpio-keys-polled {
  30                 compatible = "gpio-keys-polled";
  31                 #address-cells = <1>;
  32                 #size-cells = <0>;
  33                 poll-interval = <20>;
  34
  35                 s1 {
  36                         label = "reset";
  37                         gpios = <&gpio0 1 1>;
  38                         linux,code = <KEY_RESTART>;
  39                 };
  40         };
  41 };
  42
  43 &gpio2 {
  44         status = "okay";
  45 };
  46
  47 &gpio3 {
  48         status = "okay";
  49 };
  50
  51 &spi0 {
  52         status = "okay";
  53
  54         m25p80@0 {
  55                 #address-cells = <1>;
  56                 #size-cells = <1>;
  57                 compatible = "jedec,spi-nor";
  58                 reg = <0>;
  59                 spi-max-frequency = <10000000>;
  60
  61                 partition@0 {
  62                         label = "u-boot";
  63                         reg = <0x0 0x30000>;
  64                         read-only;
  65                 };
  66
  67                 partition@30000 {
  68                         label = "u-boot-env";
  69                         reg = <0x30000 0x10000>;
  70                         read-only;
  71                 };
  72
  73                 factory: partition@40000 {
  74                         label = "factory";
  75                         reg = <0x40000 0x10000>;
  76                         read-only;
  77                 };
  78
  79                 partition@50000 {
  80                         label = "firmware";
  81                         reg = <0x50000 0xfb0000>;
  82                 };
  83         };
  84 };
  85
  86 &pinctrl {
  87         state_default: pinctrl0 {
  88                 gpio {
  89                         ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
  90                         ralink,function = "gpio";
  91                 };
  92         };
  93 };
  94
  95 &ethernet {
  96         pinctrl-names = "default";
  97         pinctrl-0 = <&ephy_pins>;
  98         mediatek,portmap = "llllw";
  99 };
 100
 101 &gsw {
 102         mediatek,port4 = "ephy";
 103 };
 104
 105 &wmac {
 106         ralink,mtd-eeprom = <&factory 0>;
 107 };
 108
 109 &sdhci {
 110         status = "okay";
 111 };
 112
 113 &ehci {
 114         status = "okay";
 115 };
 116
 117 &ohci {
 118         status = "okay";
 119 };
 120
 121 &pcie {
 122         status = "okay";
 123 };