target/linux/ramips/dts/RT-N10-PLUS.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "RT-N10-PLUS", "ralink,rt3050-soc";
   9         model = "Asus RT-N10+";
  10
  11         cfi@1f000000 {
  12                 compatible = "cfi-flash";
  13                 reg = <0x1f000000 0x800000>;
  14                 bank-width = <2>;
  15                 device-width = <2>;
  16                 #address-cells = <1>;
  17                 #size-cells = <1>;
  18
  19                 partition@0 {
  20                         label = "u-boot";
  21                         reg = <0x0 0x30000>;
  22                         read-only;
  23                 };
  24
  25                 partition@30000 {
  26                         label = "devdata";
  27                         reg = <0x30000 0x10000>;
  28                         read-only;
  29                 };
  30
  31                 devconf: partition@40000 {
  32                         label = "devconf";
  33                         reg = <0x40000 0x10000>;
  34                         read-only;
  35                 };
  36
  37                 partition@50000 {
  38                         label = "firmware";
  39                         reg = <0x50000 0x3b0000>;
  40                 };
  41         };
  42
  43         gpio-leds {
  44                 compatible = "gpio-leds";
  45
  46                 wps {
  47                         label = "rt-n10-plus:green:wps";
  48                         gpios = <&gpio0 14 1>;
  49                 };
  50         };
  51
  52         gpio-keys-polled {
  53                 compatible = "gpio-keys-polled";
  54                 #address-cells = <1>;
  55                 #size-cells = <0>;
  56                 poll-interval = <20>;
  57
  58                 reset {
  59                         label = "reset";
  60                         gpios = <&gpio0 10 1>;
  61                         linux,code = <KEY_RESTART>;
  62                 };
  63
  64                 wps {
  65                         label = "wps";
  66                         gpios = <&gpio0 0 1>;
  67                         linux,code = <KEY_WPS_BUTTON>;
  68                 };
  69         };
  70 };
  71
  72 &ethernet {
  73         mtd-mac-address = <&devconf 0x4>;
  74 };
  75
  76 &esw {
  77         mediatek,portmap = <0x3e>;
  78 };
  79
  80 &wmac {
  81         ralink,mtd-eeprom = <&devconf 0>;
  82 };