target/linux/ramips/dts/RT5350F-OLINUXINO-EVB.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 / {
   6         compatible = "RT5350F-OLINUXINO-EVB", "ralink,rt5350-soc";
   7         model = "Olimex RT5350F-OLinuXino-EVB";
   8
   9         gpio_export {
  10                 compatible = "gpio-export";
  11                 #size-cells = <0>;
  12
  13                 relay1 {
  14                         gpio-export,name = "relay1";
  15                         gpio-export,output = <0>;
  16                         gpios = <&gpio0 14 0>;
  17                 };
  18
  19                 relay2 {
  20                         gpio-export,name = "relay2";
  21                         gpio-export,output = <0>;
  22                         gpios = <&gpio0 12 0>;
  23                 };
  24
  25                 button {
  26                         gpio-export,name = "button";
  27                         gpios = <&gpio0 0 1>;
  28                 };
  29         };
  30 };
  31
  32 &spi0 {
  33         status = "okay";
  34
  35         m25p80@0 {
  36                 #address-cells = <1>;
  37                 #size-cells = <1>;
  38                 compatible = "jedec,spi-nor";
  39                 reg = <0>;
  40                 spi-max-frequency = <10000000>;
  41
  42                 partition@0 {
  43                         label = "u-boot";
  44                         reg = <0x0 0x30000>;
  45                         read-only;
  46                 };
  47
  48                 partition@30000 {
  49                         label = "u-boot-env";
  50                         reg = <0x30000 0x10000>;
  51                         read-only;
  52                 };
  53
  54                 factory: partition@40000 {
  55                         label = "factory";
  56                         reg = <0x40000 0x10000>;
  57                         read-only;
  58                 };
  59
  60                 partition@50000 {
  61                         label = "firmware";
  62                         reg = <0x50000 0x7b0000>;
  63                 };
  64         };
  65 };
  66
  67 &gpio1 {
  68         status = "okay";
  69 };
  70
  71 &pinctrl {
  72         state_default: pinctrl0 {
  73                 gpio {
  74                         ralink,group = "jtag", "rgmii", "mdio", "uartf";
  75                         ralink,function = "gpio";
  76                 };
  77         };
  78 };
  79
  80 &ethernet {
  81         mtd-mac-address = <&factory 0x4>;
  82 };
  83
  84 &esw {
  85         mediatek,portmap = <0x2f>;
  86         mediatek,led_polarity = <0x17>;
  87 };
  88
  89 &wmac {
  90         ralink,mtd-eeprom = <&factory 0>;
  91 };
  92
  93 &ehci {
  94         status = "okay";
  95 };
  96
  97 &ohci {
  98         status = "okay";
  99 };