target/linux/ramips/dts/WLI-TX4-AG300N.dts

   1 /dts-v1/;
   2
   3 #include "rt2880.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         #address-cells = <1>;
   9         #size-cells = <1>;
  10         compatible = "WLI-TX4-AG300N", "ralink,rt2880-soc";
  11         model = "Buffalo WLI-TX4-AG300N";
  12
  13         cfi@1f000000 {
  14                 compatible = "cfi-flash";
  15                 reg = <0x1f000000 0x800000>;
  16                 bank-width = <2>;
  17                 device-width = <2>;
  18                 #address-cells = <1>;
  19                 #size-cells = <1>;
  20
  21                 partition@0 {
  22                         label = "uboot";
  23                         reg = <0x0 0x30000>;
  24                         read-only;
  25                 };
  26
  27                 partition@30000 {
  28                         label = "uboot-env";
  29                         reg = <0x30000 0x10000>;
  30                         read-only;
  31                 };
  32
  33                 factory: partition@40000 {
  34                         label = "factory";
  35                         reg = <0x40000 0x10000>;
  36                         read-only;
  37                 };
  38
  39                 partition@50000 {
  40                         label = "firmware";
  41                         reg = <0x50000 0x3b0000>;
  42                 };
  43         };
  44
  45         gpio-keys-polled {
  46                 compatible = "gpio-keys-polled";
  47                 #address-cells = <1>;
  48                 #size-cells = <0>;
  49                 poll-interval = <100>;
  50
  51                 wps {
  52                         label = "wps";
  53                         gpios = <&gpio0 0 1>;
  54                         linux,code = <KEY_WPS_BUTTON>;
  55                 };
  56
  57                 bandwidth {
  58                         label = "bandwidth";
  59                         gpios = <&gpio0 8 0>;
  60                         linux,code = <KEY_RESTART>;
  61                 };
  62
  63                 reset {
  64                         label = "reset";
  65                         gpios = <&gpio0 9 1>;
  66                         linux,code = <KEY_RESTART>;
  67                 };
  68         };
  69
  70         gpio-leds {
  71                 compatible = "gpio-leds";
  72
  73                 diag {
  74                         label = "wli-tx4-ag300n:red:diag";
  75                         gpios = <&gpio0 10 1>;
  76                 };
  77
  78                 power {
  79                         label = "wli-tx4-ag300n:blue:power";
  80                         gpios = <&gpio0 12 1>;
  81                 };
  82
  83                 security {
  84                         label = "wli-tx4-ag300n:blue:security";
  85                         gpios = <&gpio0 13 1>;
  86                 };
  87         };
  88 };
  89
  90 &gpio0 {
  91         status = "okay";
  92 };
  93
  94 &ethernet {
  95         status = "okay";
  96         mtd-mac-address = <&factory 0x4>;
  97
  98         port@0 {
  99                 mediatek,fixed-link = <100 1 1 1>;
 100         };
 101
 102         mdio-bus {
 103                 status = "okay";
 104
 105                 phy0: ethernet-phy@0 {
 106                         phy-mode = "mii";
 107                         reg = <0>;
 108                 };
 109         };
 110 };
 111
 112 &wmac {
 113         ralink,mtd-eeprom = <&factory 0>;
 114 };