CONFIG_I2C:drivers/i2c/i2c-core \
CONFIG_I2C_CHARDEV:drivers/i2c/i2c-dev
-ifeq ($(CONFIG_OF),y)
- I2C_CORE_MODULES+=CONFIG_OF_I2C:drivers/of/of_i2c@lt3.12
-endif
-
define KernelPackage/i2c-core
$(call i2c_defaults,$(I2C_CORE_MODULES),51)
TITLE:=I2C support
define KernelPackage/i2c-algo-bit
$(call i2c_defaults,$(I2C_ALGOBIT_MODULES),55)
TITLE:=I2C bit-banging interfaces
- DEPENDS:=kmod-i2c-core
+ DEPENDS:=+kmod-i2c-core
endef
define KernelPackage/i2c-algo-bit/description
define KernelPackage/i2c-algo-pca
$(call i2c_defaults,$(I2C_ALGOPCA_MODULES),55)
TITLE:=I2C PCA 9564 interfaces
- DEPENDS:=kmod-i2c-core
+ DEPENDS:=+kmod-i2c-core
endef
define KernelPackage/i2c-algo-pca/description
define KernelPackage/i2c-algo-pcf
$(call i2c_defaults,$(I2C_ALGOPCF_MODULES),55)
TITLE:=I2C PCF 8584 interfaces
- DEPENDS:=kmod-i2c-core
+ DEPENDS:=+kmod-i2c-core
endef
define KernelPackage/i2c-algo-pcf/description
$(eval $(call KernelPackage,i2c-algo-pcf))
+I2C_CCGS_UCSI_MODULES:= \
+ CONFIG_I2C_CCGX_UCSI:drivers/i2c/busses/i2c-ccgx-ucsi
+
+define KernelPackage/i2c-ccgs-ucsi
+ $(call i2c_defaults,$(I2C_CCGS_UCSI_MODULES),58)
+ TITLE:=Cypress CCGx Type-C controller
+ DEPENDS:=+kmod-i2c-core +kmod-regmap-core
+ HIDDEN:=y
+endef
+
+
+$(eval $(call KernelPackage,i2c-ccgs-ucsi))
+
+
+I2C_DWCORE_MODULES:= \
+ CONFIG_I2C_DESIGNWARE_CORE:drivers/i2c/busses/i2c-designware-core
+
+define KernelPackage/i2c-designware-core
+ $(call i2c_defaults,$(I2C_DWCORE_MODULES),58)
+ TITLE:=Synopsys DesignWare I2C core
+ DEPENDS:=+kmod-i2c-core +kmod-regmap-core
+ HIDDEN:=y
+endef
+
+$(eval $(call KernelPackage,i2c-designware-core))
+
+
+I2C_DWPCI_MODULES:= \
+ CONFIG_I2C_DESIGNWARE_PCI:drivers/i2c/busses/i2c-designware-pci
+
+define KernelPackage/i2c-designware-pci
+ $(call i2c_defaults,$(I2C_DWPCI_MODULES),59)
+ TITLE:=Synopsys DesignWare PCI
+ DEPENDS:=@PCI_SUPPORT +kmod-i2c-designware-core +kmod-i2c-ccgs-ucsi
+endef
+
+define KernelPackage/i2c-designware-pci/description
+ Support for Synopsys DesignWare I2C controller. Only master mode is supported.
+endef
+
+$(eval $(call KernelPackage,i2c-designware-pci))
+
+
I2C_GPIO_MODULES:= \
CONFIG_I2C_GPIO:drivers/i2c/busses/i2c-gpio
$(eval $(call KernelPackage,i2c-gpio))
-I2C_MPC_MODULES:=\
- CONFIG_I2C_MPC:drivers/i2c/busses/i2c-mpc
-define KernelPackage/i2c-mpc
- $(call i2c_defaults,$(I2C_MPC_MODULES),59)
- TITLE:=MPC I2C accessors
- DEPENDS:=@TARGET_mpc52xx||TARGET_mpc83xx||TARGET_mpc85xx +kmod-i2c-core
+I2C_I801_MODULES:= \
+ CONFIG_I2C_I801:drivers/i2c/busses/i2c-i801
+
+define KernelPackage/i2c-i801
+ $(call i2c_defaults,$(I2C_I801_MODULES),59)
+ TITLE:=Intel I801 and compatible I2C interfaces
+ DEPENDS:=@PCI_SUPPORT @TARGET_x86 +kmod-i2c-core +kmod-i2c-smbus
endef
-define KernelPackage/i2c-mpc/description
- Kernel module for Freescale MPC52xx MPC83xx MPC85xx I2C accessors
+define KernelPackage/i2c-i801/description
+ Support for the Intel I801 family of mainboard I2C interfaces,
+ specifically 82801AA, 82801AB, 82801BA, 82801CA/CAM, 82801DB,
+ 82801EB/ER (ICH5/ICH5R), 6300ESB, ICH6, ICH7, ESB2, ICH8, ICH9,
+ EP80579 (Tolapai), ICH10, 5/3400 Series (PCH), 6 Series (PCH),
+ Patsburg (PCH), DH89xxCC (PCH), Panther Point (PCH),
+ Lynx Point (PCH), Lynx Point-LP (PCH), Avoton (SOC),
+ Wellsburg (PCH), Coleto Creek (PCH), Wildcat Point (PCH),
+ Wildcat Point-LP (PCH), BayTrail (SOC), Sunrise Point-H (PCH),
+ Sunrise Point-LP (PCH), DNV (SOC), Broxton (SOC),
+ Lewisburg (PCH).
endef
-$(eval $(call KernelPackage,i2c-mpc))
+$(eval $(call KernelPackage,i2c-i801))
-I2C_IBM_IIC_MODULES:=\
- CONFIG_I2C_IBM_IIC:drivers/i2c/busses/i2c-ibm_iic
-define KernelPackage/i2c-ibm-iic
- $(call i2c_defaults,$(OF_I2C_MODULES),59)
- TITLE:=IBM PPC 4xx on-chip I2C interface support
- DEPENDS:=@TARGET_ppc40x||TARGET_ppc4xx +kmod-i2c-core
+I2C_MUX_MODULES:= \
+ CONFIG_I2C_MUX:drivers/i2c/i2c-mux
+
+define KernelPackage/i2c-mux
+ $(call i2c_defaults,$(I2C_MUX_MODULES),51)
+ TITLE:=I2C bus multiplexing support
+ DEPENDS:=+kmod-i2c-core
endef
-define KernelPackage/i2c-ibm-iic/description
- Kernel module for IIC peripheral found on embedded IBM PPC4xx based systems
+define KernelPackage/i2c-mux/description
+ Kernel modules for I2C bus multiplexing support
endef
-$(eval $(call KernelPackage,i2c-ibm-iic))
+$(eval $(call KernelPackage,i2c-mux))
-I2C_MV64XXX_MODULES:=\
- CONFIG_I2C_MV64XXX:drivers/i2c/busses/i2c-mv64xxx
+I2C_MUX_GPIO_MODULES:= \
+ CONFIG_I2C_MUX_GPIO:drivers/i2c/muxes/i2c-mux-gpio
-define KernelPackage/i2c-mv64xxx
- $(call i2c_defaults,$(I2C_MV64XXX_MODULES),59)
- TITLE:=Orion Platform I2C interface support
- DEPENDS:=@TARGET_kirkwood||TARGET_orion +kmod-i2c-core
+define KernelPackage/i2c-mux-gpio
+ $(call i2c_defaults,$(I2C_MUX_GPIO_MODULES),51)
+ TITLE:=GPIO-based I2C mux/switches
+ DEPENDS:=+kmod-i2c-mux
endef
-define KernelPackage/i2c-mv64xxx/description
- Kernel module for I2C interface on the Kirkwood, Orion and Armada XP/370
- family processors
+define KernelPackage/i2c-mux-gpio/description
+ Kernel modules for GENERIC_GPIO I2C bus mux/switching devices
endef
-$(eval $(call KernelPackage,i2c-mv64xxx))
+$(eval $(call KernelPackage,i2c-mux-gpio))
-I2C_TINY_USB_MODULES:= \
- CONFIG_I2C_TINY_USB:drivers/i2c/busses/i2c-tiny-usb
+I2C_MUX_REG_MODULES:= \
+ CONFIG_I2C_MUX_REG:drivers/i2c/muxes/i2c-mux-reg
-define KernelPackage/i2c-tiny-usb
- $(call i2c_defaults,$(I2C_TINY_USB_MODULES),59)
- TITLE:=I2C Tiny USB adaptor
- DEPENDS:=@USB_SUPPORT kmod-i2c-core +kmod-usb-core
+define KernelPackage/i2c-mux-reg
+ $(call i2c_defaults,$(I2C_MUX_REG_MODULES),51)
+ TITLE:=Register-based I2C mux/switches
+ DEPENDS:=+kmod-i2c-mux
endef
-define KernelPackage/i2c-tiny-usb/description
- Kernel module for the I2C Tiny USB adaptor developed
- by Till Harbaum (http://www.harbaum.org/till/i2c_tiny_usb)
+define KernelPackage/i2c-mux-reg/description
+ Kernel modules for register-based I2C bus mux/switching devices
endef
-$(eval $(call KernelPackage,i2c-tiny-usb))
+$(eval $(call KernelPackage,i2c-mux-reg))
+
+
+I2C_MUX_PCA9541_MODULES:= \
+ CONFIG_I2C_MUX_PCA9541:drivers/i2c/muxes/i2c-mux-pca9541
+
+define KernelPackage/i2c-mux-pca9541
+ $(call i2c_defaults,$(I2C_MUX_PCA9541_MODULES),51)
+ TITLE:=Philips PCA9541 I2C mux/switches
+ DEPENDS:=+kmod-i2c-mux
+endef
+
+define KernelPackage/i2c-mux-pca9541/description
+ Kernel modules for PCA9541 I2C bus mux/switching devices
+endef
+
+$(eval $(call KernelPackage,i2c-mux-pca9541))
+
+I2C_MUX_PCA954x_MODULES:= \
+ CONFIG_I2C_MUX_PCA954x:drivers/i2c/muxes/i2c-mux-pca954x
+
+define KernelPackage/i2c-mux-pca954x
+ $(call i2c_defaults,$(I2C_MUX_PCA954x_MODULES),51)
+ TITLE:=Philips PCA954x I2C mux/switches
+ DEPENDS:=+kmod-i2c-mux
+endef
+
+define KernelPackage/i2c-mux-pca954x/description
+ Kernel modules for PCA954x I2C bus mux/switching devices
+endef
+
+$(eval $(call KernelPackage,i2c-mux-pca954x))
I2C_PIIX4_MODULES:= \
define KernelPackage/i2c-piix4
$(call i2c_defaults,$(I2C_PIIX4_MODULES),59)
TITLE:=Intel PIIX4 and compatible I2C interfaces
- DEPENDS:=@PCI_SUPPORT @(x86||x86_64) kmod-i2c-core
+ DEPENDS:=@PCI_SUPPORT @TARGET_x86 +kmod-i2c-core
endef
define KernelPackage/i2c-piix4/description
$(eval $(call KernelPackage,i2c-piix4))
-I2C_MUX_MODULES:= \
- CONFIG_I2C_MUX:drivers/i2c/i2c-mux
+I2C_PXA_MODULES:= \
+ CONFIG_I2C_PXA:drivers/i2c/busses/i2c-pxa
-define KernelPackage/i2c-mux
- $(call i2c_defaults,$(I2C_MUX_MODULES),51)
- TITLE:=I2C bus multiplexing support
- DEPENDS:=kmod-i2c-core
+define KernelPackage/i2c-pxa
+ $(call i2c_defaults,$(I2C_PXA_MODULES),50)
+ TITLE:=Intel PXA I2C bus driver
+ DEPENDS:=+kmod-i2c-core
endef
-define KernelPackage/i2c-mux/description
- Kernel modules for I2C bus multiplexing support
+define KernelPackage/i2c-pxa/description
+ Kernel module for Intel PXA2XX I2C adapter
endef
-$(eval $(call KernelPackage,i2c-mux))
+$(eval $(call KernelPackage,i2c-pxa))
-I2C_MUX_GPIO_MODULES:= \
- CONFIG_I2C_MUX_GPIO:drivers/i2c/muxes/i2c-mux-gpio
-define KernelPackage/i2c-mux-gpio
- $(call i2c_defaults,$(I2C_MUX_GPIO_MODULES),51)
- TITLE:=GPIO-based I2C mux/switches
- DEPENDS:=kmod-i2c-mux
-endef
+I2C_SMBUS_MODULES:= \
+ CONFIG_I2C_SMBUS:drivers/i2c/i2c-smbus
-define KernelPackage/i2c-mux-gpio/description
- Kernel modules for GENERIC_GPIO I2C bus mux/switching devices
+define KernelPackage/i2c-smbus
+ $(call i2c_defaults,$(I2C_SMBUS_MODULES),58)
+ TITLE:=SMBus-specific protocols helper
+ DEPENDS:=+kmod-i2c-core
endef
-$(eval $(call KernelPackage,i2c-mux-gpio))
-
-I2C_MUX_PCA954x_MODULES:= \
- CONFIG_I2C_MUX_PCA954x:drivers/i2c/muxes/i2c-mux-pca954x
-
-define KernelPackage/i2c-mux-pca954x
- $(call i2c_defaults,$(I2C_MUX_PCA954x_MODULES),51)
- TITLE:=Philips PCA954x I2C mux/switches
- DEPENDS:=kmod-i2c-mux
+define KernelPackage/i2c-smbus/description
+ Support for the SMBus extensions to the I2C specification.
endef
-define KernelPackage/i2c-mux-pca954x/description
- Kernel modules for PCA954x I2C bus mux/switching devices
-endef
+$(eval $(call KernelPackage,i2c-smbus))
-$(eval $(call KernelPackage,i2c-mux-pca954x))
-I2C_MUX_PCA9541_MODULES:= \
- CONFIG_I2C_MUX_PCA9541:drivers/i2c/muxes/i2c-mux-pca9541
+I2C_TINY_USB_MODULES:= \
+ CONFIG_I2C_TINY_USB:drivers/i2c/busses/i2c-tiny-usb
-define KernelPackage/i2c-mux-pca9541
- $(call i2c_defaults,$(I2C_MUX_PCA9541_MODULES),51)
- TITLE:=Philips PCA9541 I2C mux/switches
- DEPENDS:=kmod-i2c-mux
+define KernelPackage/i2c-tiny-usb
+ $(call i2c_defaults,$(I2C_TINY_USB_MODULES),59)
+ TITLE:=I2C Tiny USB adaptor
+ DEPENDS:=@USB_SUPPORT +kmod-i2c-core +kmod-usb-core
endef
-define KernelPackage/i2c-mux-pca9541/description
- Kernel modules for PCA9541 I2C bus mux/switching devices
+define KernelPackage/i2c-tiny-usb/description
+ Kernel module for the I2C Tiny USB adaptor developed
+ by Till Harbaum (http://www.harbaum.org/till/i2c_tiny_usb)
endef
-$(eval $(call KernelPackage,i2c-mux-pca9541))
+$(eval $(call KernelPackage,i2c-tiny-usb))
+
+
projects / openwrt / openwrt.git / blobdiff