$(LINUX_DIR)/drivers/bluetooth/hci_uart.ko \
$(LINUX_DIR)/drivers/bluetooth/btusb.ko \
$(LINUX_DIR)/drivers/bluetooth/btintel.ko \
- $(LINUX_DIR)/drivers/bluetooth/btrtl.ko
+ $(LINUX_DIR)/drivers/bluetooth/btrtl.ko \
+ $(LINUX_DIR)/drivers/bluetooth/btmtk.ko@ge5.17
AUTOLOAD:=$(call AutoProbe,bluetooth rfcomm bnep hidp hci_uart btusb)
endef
$(eval $(call KernelPackage,google-firmware))
-define KernelPackage/gpio-f7188x
+define KernelPackage/lkdtm
SUBMENU:=$(OTHER_MENU)
- TITLE:=Fintek F718xx/F818xx GPIO Support
- DEPENDS:=@GPIO_SUPPORT @TARGET_x86
- KCONFIG:=CONFIG_GPIO_F7188X
- FILES:=$(LINUX_DIR)/drivers/gpio/gpio-f7188x.ko
- AUTOLOAD:=$(call AutoProbe,gpio-f7188x)
+ TITLE:=Linux Kernel Dump Test Tool Module
+ KCONFIG:=CONFIG_LKDTM
+ FILES:=$(LINUX_DIR)/drivers/misc/lkdtm/lkdtm.ko
+ AUTOLOAD:=$(call AutoProbe,lkdtm)
endef
-define KernelPackage/gpio-f7188x/description
- Kernel module for the GPIOs found on many Fintek Super-IO chips.
+define KernelPackage/lkdtm/description
+ This module enables testing of the different dumping mechanisms by inducing
+ system failures at predefined crash points.
endef
-$(eval $(call KernelPackage,gpio-f7188x))
+$(eval $(call KernelPackage,lkdtm))
define KernelPackage/pinctrl-mcp23s08
$(eval $(call KernelPackage,pinctrl-mcp23s08-spi))
-define KernelPackage/gpio-nxp-74hc164
- SUBMENU:=$(OTHER_MENU)
- TITLE:=NXP 74HC164 GPIO expander support
- KCONFIG:=CONFIG_GPIO_74X164
- FILES:=$(LINUX_DIR)/drivers/gpio/gpio-74x164.ko
- AUTOLOAD:=$(call AutoProbe,gpio-74x164)
-endef
-
-define KernelPackage/gpio-nxp-74hc164/description
- Kernel module for NXP 74HC164 GPIO expander
-endef
-
-$(eval $(call KernelPackage,gpio-nxp-74hc164))
-
-define KernelPackage/gpio-pca953x
- SUBMENU:=$(OTHER_MENU)
- DEPENDS:=@GPIO_SUPPORT +kmod-i2c-core +kmod-regmap-i2c
- TITLE:=PCA95xx, TCA64xx, and MAX7310 I/O ports
- KCONFIG:=CONFIG_GPIO_PCA953X
- FILES:=$(LINUX_DIR)/drivers/gpio/gpio-pca953x.ko
- AUTOLOAD:=$(call AutoLoad,55,gpio-pca953x)
-endef
-
-define KernelPackage/gpio-pca953x/description
- Kernel module for MAX731{0,2,3,5}, PCA6107, PCA953{4-9}, PCA955{4-7},
- PCA957{4,5} and TCA64{08,16} I2C GPIO expanders
-endef
-
-$(eval $(call KernelPackage,gpio-pca953x))
-
-define KernelPackage/gpio-pcf857x
- SUBMENU:=$(OTHER_MENU)
- DEPENDS:=@GPIO_SUPPORT +kmod-i2c-core
- TITLE:=PCX857x, PCA967x and MAX732X I2C GPIO expanders
- KCONFIG:=CONFIG_GPIO_PCF857X
- FILES:=$(LINUX_DIR)/drivers/gpio/gpio-pcf857x.ko
- AUTOLOAD:=$(call AutoLoad,55,gpio-pcf857x)
-endef
-
-define KernelPackage/gpio-pcf857x/description
- Kernel module for PCF857x, PCA{85,96}7x, and MAX732[89] I2C GPIO expanders
-endef
-
-$(eval $(call KernelPackage,gpio-pcf857x))
-
-
-define KernelPackage/gpio-it87
- SUBMENU:=$(OTHER_MENU)
- DEPENDS:=@GPIO_SUPPORT @TARGET_x86
- TITLE:=GPIO support for IT87xx Super I/O chips
- KCONFIG:=CONFIG_GPIO_IT87
- FILES:=$(LINUX_DIR)/drivers/gpio/gpio-it87.ko
- AUTOLOAD:=$(call AutoLoad,25,gpio-it87,1)
-endef
-
-define KernelPackage/gpio-it87/description
- This driver is tested with ITE IT8728 and IT8732 Super I/O chips, and
- supports the IT8761E, IT8613, IT8620E, and IT8628E Super I/O chips as
- well.
-endef
-
-$(eval $(call KernelPackage,gpio-it87))
-
-
-define KernelPackage/gpio-amd-fch
- SUBMENU:=$(OTHER_MENU)
- DEPENDS:=@GPIO_SUPPORT @TARGET_x86
- TITLE:=GPIO support for AMD Fusion Controller Hub (G-series SOCs)
- KCONFIG:=CONFIG_GPIO_AMD_FCH
- FILES:=$(LINUX_DIR)/drivers/gpio/gpio-amd-fch.ko
- AUTOLOAD:=$(call AutoLoad,25,gpio-amd-fch,1)
-endef
-
-define KernelPackage/gpio-amd-fch/description
- This option enables driver for GPIO on AMDs Fusion Controller Hub,
- as found on G-series SOCs (eg. GX-412TC)
-endef
-
-$(eval $(call KernelPackage,gpio-amd-fch))
-
-
define KernelPackage/ppdev
SUBMENU:=$(OTHER_MENU)
TITLE:=Parallel port support
CONFIG_SSB_DRIVER_MIPS=n \
CONFIG_SSB_DRIVER_PCICORE=y \
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y \
+ CONFIG_SSB_FALLBACK_SPROM=y \
CONFIG_SSB_PCIHOST=y \
CONFIG_SSB_PCIHOST_POSSIBLE=y \
CONFIG_SSB_POSSIBLE=y \
CONFIG_BCMA \
CONFIG_BCMA_POSSIBLE=y \
CONFIG_BCMA_BLOCKIO=y \
+ CONFIG_BCMA_FALLBACK_SPROM=y \
CONFIG_BCMA_HOST_PCI_POSSIBLE=y \
CONFIG_BCMA_HOST_PCI=y \
CONFIG_BCMA_HOST_SOC=n \
$(eval $(call KernelPackage,rtc-isl1208))
+define KernelPackage/rtc-mv
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Marvell SoC RTC support
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ KCONFIG:=CONFIG_RTC_DRV_MV \
+ CONFIG_RTC_CLASS=y
+ FILES:=$(LINUX_DIR)/drivers/rtc/rtc-mv.ko
+ AUTOLOAD:=$(call AutoProbe,rtc-mv)
+endef
+
+define KernelPackage/rtc-mv/description
+ Kernel module for Marvell SoC RTC.
+endef
+
+$(eval $(call KernelPackage,rtc-mv))
+
+
define KernelPackage/rtc-pcf8563
SUBMENU:=$(OTHER_MENU)
TITLE:=Philips PCF8563/Epson RTC8564 RTC support
$(eval $(call KernelPackage,rtc-pcf2127))
+define KernelPackage/rtc-r7301
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Epson RTC7301 support
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-regmap-mmio
+ KCONFIG:=CONFIG_RTC_DRV_R7301 \
+ CONFIG_RTC_CLASS=y
+ FILES:=$(LINUX_DIR)/drivers/rtc/rtc-r7301.ko
+ AUTOLOAD:=$(call AutoProbe,rtc-r7301)
+endef
+
+define KernelPackage/rtc-r7301/description
+ Kernel module for Epson RTC7301 RTC chip
+endef
+
+$(eval $(call KernelPackage,rtc-r7301))
define KernelPackage/rtc-rs5c372a
SUBMENU:=$(OTHER_MENU)
$(eval $(call KernelPackage,rtc-s35390a))
+define KernelPackage/rtc-x1205
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=Xicor Intersil X1205
+ DEFAULT:=m if ALL_KMODS && RTC_SUPPORT
+ DEPENDS:=+kmod-i2c-core
+ KCONFIG:=CONFIG_RTC_DRV_X1205 \
+ CONFIG_RTC_CLASS=y
+ FILES:=$(LINUX_DIR)/drivers/rtc/rtc-x1205.ko
+ AUTOLOAD:=$(call AutoProbe,rtc-x1205)
+endef
+
+define KernelPackage/rtc-x1205/description
+ Kernel module for Xicor Intersil X1205 I2C RTC chip
+endef
+
+$(eval $(call KernelPackage,rtc-x1205))
define KernelPackage/mtdtests
SUBMENU:=$(OTHER_MENU)
SUBMENU:=$(OTHER_MENU)
TITLE:=Ramoops (pstore-ram)
DEFAULT:=m if ALL_KMODS
- KCONFIG:=CONFIG_PSTORE_RAM
+ KCONFIG:=CONFIG_PSTORE_RAM \
+ CONFIG_PSTORE_CONSOLE=y
DEPENDS:=+kmod-pstore +kmod-reed-solomon
FILES:= $(LINUX_DIR)/fs/pstore/ramoops.ko
AUTOLOAD:=$(call AutoLoad,30,ramoops,1)
KCONFIG:= CONFIG_SERIAL_8250_EXAR
FILES:=$(LINUX_DIR)/drivers/tty/serial/8250/8250_exar.ko
AUTOLOAD:=$(call AutoProbe,8250 8250_base 8250_exar)
- DEPENDS:=+kmod-serial-8250
+ DEPENDS:=@PCI_SUPPORT +kmod-serial-8250
endef
define KernelPackage/serial-8250-exar/description
endef
define KernelPackage/zram/config
- choice
- prompt "ZRAM Default compressor"
- default ZRAM_DEF_COMP_LZORLE
+ if PACKAGE_kmod-zram
+ choice
+ prompt "ZRAM Default compressor"
+ default ZRAM_DEF_COMP_LZORLE
- config ZRAM_DEF_COMP_LZORLE
+ config ZRAM_DEF_COMP_LZORLE
bool "lzo-rle"
select PACKAGE_kmod-lib-lzo
- config ZRAM_DEF_COMP_LZO
+ config ZRAM_DEF_COMP_LZO
bool "lzo"
select PACKAGE_kmod-lib-lzo
- config ZRAM_DEF_COMP_LZ4
+ config ZRAM_DEF_COMP_LZ4
bool "lz4"
select PACKAGE_kmod-lib-lz4
- config ZRAM_DEF_COMP_ZSTD
+ config ZRAM_DEF_COMP_LZ4HC
+ bool "lz4-hc"
+ select PACKAGE_kmod-lib-lz4hc
+
+ config ZRAM_DEF_COMP_ZSTD
bool "zstd"
select PACKAGE_kmod-lib-zstd
- endchoice
+ endchoice
+ endif
endef
$(eval $(call KernelPackage,zram))
$(eval $(call KernelPackage,thermal))
-define KernelPackage/gpio-beeper
- SUBMENU:=$(OTHER_MENU)
- TITLE:=GPIO beeper support
- DEPENDS:=+kmod-input-core
- KCONFIG:= \
- CONFIG_INPUT_MISC=y \
- CONFIG_INPUT_GPIO_BEEPER
- FILES:= \
- $(LINUX_DIR)/drivers/input/misc/gpio-beeper.ko
- AUTOLOAD:=$(call AutoLoad,50,gpio-beeper)
-endef
-
-define KernelPackage/gpio-beeper/description
- This enables playing beeps through an GPIO-connected buzzer
-endef
-
-$(eval $(call KernelPackage,gpio-beeper))
-
-
define KernelPackage/echo
SUBMENU:=$(OTHER_MENU)
TITLE:=Line Echo Canceller
define KernelPackage/tpm
SUBMENU:=$(OTHER_MENU)
TITLE:=TPM Hardware Support
- DEPENDS:= +kmod-random-core +(LINUX_5_15):kmod-asn1-decoder \
- +(LINUX_5_15):kmod-asn1-encoder +(LINUX_5_15):kmod-oid-registry
+ DEPENDS:= +kmod-random-core +kmod-asn1-decoder \
+ +kmod-asn1-encoder +kmod-oid-registry
KCONFIG:= CONFIG_TCG_TPM
FILES:= $(LINUX_DIR)/drivers/char/tpm/tpm.ko
AUTOLOAD:=$(call AutoLoad,10,tpm,1)
define KernelPackage/mhi-bus
SUBMENU:=$(OTHER_MENU)
TITLE:=MHI bus
- DEPENDS:=@LINUX_5_15
KCONFIG:=CONFIG_MHI_BUS \
CONFIG_MHI_BUS_DEBUG=y
- FILES:=$(LINUX_DIR)/drivers/bus/mhi/core/mhi.ko
+ FILES:=$(LINUX_DIR)/drivers/bus/mhi/host/mhi.ko
AUTOLOAD:=$(call AutoProbe,mhi)
endef
define KernelPackage/mhi-pci-generic
SUBMENU:=$(OTHER_MENU)
TITLE:=MHI PCI controller driver
- DEPENDS:=@LINUX_5_15 +kmod-mhi-bus
+ DEPENDS:=@PCI_SUPPORT +kmod-mhi-bus
KCONFIG:=CONFIG_MHI_BUS_PCI_GENERIC
- FILES:=$(LINUX_DIR)/drivers/bus/mhi/mhi_pci_generic.ko
+ FILES:=$(LINUX_DIR)/drivers/bus/mhi/host/mhi_pci_generic.ko
AUTOLOAD:=$(call AutoProbe,mhi_pci_generic)
endef
projects / openwrt / openwrt.git / blobdiff