+++ /dev/null
-. /lib/functions/network.sh
-
-wpa_supplicant_add_rate() {
- local var="$1"
- local val="$(($2 / 1000))"
- local sub="$((($2 / 100) % 10))"
- append $var "$val" ","
- [ $sub -gt 0 ] && append $var "."
-}
-
-hostapd_add_rate() {
- local var="$1"
- local val="$(($2 / 100))"
- append $var "$val" " "
-}
-
-hostapd_append_wep_key() {
- local var="$1"
-
- wep_keyidx=0
- set_default key 1
- case "$key" in
- [1234])
- for idx in 1 2 3 4; do
- local zidx
- zidx=$(($idx - 1))
- json_get_var ckey "key${idx}"
- [ -n "$ckey" ] && \
- append $var "wep_key${zidx}=$(prepare_key_wep "$ckey")" "$N$T"
- done
- wep_keyidx=$((key - 1))
- ;;
- *)
- append $var "wep_key0=$(prepare_key_wep "$key")" "$N$T"
- ;;
- esac
-}
-
-hostapd_append_wpa_key_mgmt() {
- local auth_type_l="$(echo $auth_type | tr 'a-z' 'A-Z')"
-
- case "$auth_type" in
- psk|eap)
- append wpa_key_mgmt "WPA-$auth_type_l"
- [ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-${auth_type_l}"
- [ "${ieee80211w:-0}" -gt 0 ] && append wpa_key_mgmt "WPA-${auth_type_l}-SHA256"
- ;;
- eap192)
- append wpa_key_mgmt "WPA-EAP-SUITE-B-192"
- [ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-EAP"
- ;;
- eap-eap192)
- append wpa_key_mgmt "WPA-EAP-SUITE-B-192"
- append wpa_key_mgmt "WPA-EAP"
- [ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-EAP"
- [ "${ieee80211w:-0}" -gt 0 ] && append wpa_key_mgmt "WPA-EAP-SHA256"
- ;;
- sae)
- append wpa_key_mgmt "SAE"
- [ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-SAE"
- ;;
- psk-sae)
- append wpa_key_mgmt "WPA-PSK"
- [ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-PSK"
- [ "${ieee80211w:-0}" -gt 0 ] && append wpa_key_mgmt "WPA-PSK-SHA256"
- append wpa_key_mgmt "SAE"
- [ "${ieee80211r:-0}" -gt 0 ] && append wpa_key_mgmt "FT-SAE"
- ;;
- owe)
- append wpa_key_mgmt "OWE"
- ;;
- esac
-}
-
-hostapd_add_log_config() {
- config_add_boolean \
- log_80211 \
- log_8021x \
- log_radius \
- log_wpa \
- log_driver \
- log_iapp \
- log_mlme
-
- config_add_int log_level
-}
-
-hostapd_common_add_device_config() {
- config_add_array basic_rate
- config_add_array supported_rates
-
- config_add_string country
- config_add_boolean country_ie doth
- config_add_boolean spectrum_mgmt_required
- config_add_int local_pwr_constraint
- config_add_string require_mode
- config_add_boolean legacy_rates
-
- config_add_string acs_chan_bias
- config_add_array hostapd_options
-
- hostapd_add_log_config
-}
-
-hostapd_prepare_device_config() {
- local config="$1"
- local driver="$2"
-
- local base="${config%%.conf}"
- local base_cfg=
-
- json_get_vars country country_ie beacon_int:100 dtim_period:2 doth require_mode legacy_rates \
- acs_chan_bias local_pwr_constraint spectrum_mgmt_required
-
- hostapd_set_log_options base_cfg
-
- set_default country_ie 1
- set_default spectrum_mgmt_required 0
- set_default doth 1
- set_default legacy_rates 1
-
- [ "$hwmode" = "b" ] && legacy_rates=1
-
- [ -n "$country" ] && {
- append base_cfg "country_code=$country" "$N"
-
- [ "$country_ie" -gt 0 ] && {
- append base_cfg "ieee80211d=1" "$N"
- [ -n "$local_pwr_constraint" ] && append base_cfg "local_pwr_constraint=$local_pwr_constraint" "$N"
- [ "$spectrum_mgmt_required" -gt 0 ] && append base_cfg "spectrum_mgmt_required=$spectrum_mgmt_required" "$N"
- }
- [ "$hwmode" = "a" -a "$doth" -gt 0 ] && append base_cfg "ieee80211h=1" "$N"
- }
-
- [ -n "$acs_chan_bias" ] && append base_cfg "acs_chan_bias=$acs_chan_bias" "$N"
-
- local brlist= br
- json_get_values basic_rate_list basic_rate
- local rlist= r
- json_get_values rate_list supported_rates
-
- [ -n "$hwmode" ] && append base_cfg "hw_mode=$hwmode" "$N"
- [ "$legacy_rates" -eq 0 ] && set_default require_mode g
-
- [ "$hwmode" = "g" ] && {
- [ "$legacy_rates" -eq 0 ] && set_default rate_list "6000 9000 12000 18000 24000 36000 48000 54000"
- [ -n "$require_mode" ] && set_default basic_rate_list "6000 12000 24000"
- }
-
- case "$require_mode" in
- n) append base_cfg "require_ht=1" "$N";;
- ac) append base_cfg "require_vht=1" "$N";;
- esac
-
- for r in $rate_list; do
- hostapd_add_rate rlist "$r"
- done
-
- for br in $basic_rate_list; do
- hostapd_add_rate brlist "$br"
- done
-
- [ -n "$rlist" ] && append base_cfg "supported_rates=$rlist" "$N"
- [ -n "$brlist" ] && append base_cfg "basic_rates=$brlist" "$N"
- append base_cfg "beacon_int=$beacon_int" "$N"
- append base_cfg "dtim_period=$dtim_period" "$N"
-
- json_get_values opts hostapd_options
- for val in $opts; do
- append base_cfg "$val" "$N"
- done
-
- cat > "$config" <<EOF
-driver=$driver
-$base_cfg
-EOF
-}
-
-hostapd_common_add_bss_config() {
- config_add_string 'bssid:macaddr' 'ssid:string'
- config_add_boolean wds wmm uapsd hidden utf8_ssid
-
- config_add_int maxassoc max_inactivity
- config_add_boolean disassoc_low_ack isolate short_preamble
-
- config_add_int \
- wep_rekey eap_reauth_period \
- wpa_group_rekey wpa_pair_rekey wpa_master_rekey
- config_add_boolean wpa_strict_rekey
- config_add_boolean wpa_disable_eapol_key_retries
-
- config_add_boolean tdls_prohibit
-
- config_add_boolean rsn_preauth auth_cache
- config_add_int ieee80211w
- config_add_int eapol_version
-
- config_add_string 'auth_server:host' 'server:host'
- config_add_string auth_secret
- config_add_int 'auth_port:port' 'port:port'
-
- config_add_string acct_server
- config_add_string acct_secret
- config_add_int acct_port
- config_add_int acct_interval
-
- config_add_string dae_client
- config_add_string dae_secret
- config_add_int dae_port
-
- config_add_string nasid
- config_add_string ownip
- config_add_string radius_client_addr
- config_add_string iapp_interface
- config_add_string eap_type ca_cert client_cert identity anonymous_identity auth priv_key priv_key_pwd
- config_add_boolean ca_cert_usesystem ca_cert2_usesystem
- config_add_string subject_match subject_match2
- config_add_array altsubject_match altsubject_match2
- config_add_array domain_match domain_match2 domain_suffix_match domain_suffix_match2
- config_add_string ieee80211w_mgmt_cipher
-
- config_add_int dynamic_vlan vlan_naming
- config_add_string vlan_tagged_interface vlan_bridge
- config_add_string vlan_file
-
- config_add_string 'key1:wepkey' 'key2:wepkey' 'key3:wepkey' 'key4:wepkey' 'password:wpakey'
-
- config_add_string wpa_psk_file
-
- config_add_int multi_ap
-
- config_add_boolean wps_pushbutton wps_label ext_registrar wps_pbc_in_m1
- config_add_int wps_ap_setup_locked wps_independent
- config_add_string wps_device_type wps_device_name wps_manufacturer wps_pin
- config_add_string multi_ap_backhaul_ssid multi_ap_backhaul_key
-
- config_add_boolean ieee80211v wnm_sleep_mode bss_transition
- config_add_int time_advertisement
- config_add_string time_zone
-
- config_add_boolean ieee80211k rrm_neighbor_report rrm_beacon_report
-
- config_add_boolean ieee80211r pmk_r1_push ft_psk_generate_local ft_over_ds
- config_add_int r0_key_lifetime reassociation_deadline
- config_add_string mobility_domain r1_key_holder
- config_add_array r0kh r1kh
-
- config_add_int ieee80211w_max_timeout ieee80211w_retry_timeout
-
- config_add_string macfilter 'macfile:file'
- config_add_array 'maclist:list(macaddr)'
-
- config_add_array bssid_blacklist
- config_add_array bssid_whitelist
-
- config_add_int mcast_rate
- config_add_array basic_rate
- config_add_array supported_rates
-
- config_add_boolean sae_require_mfp
-
- config_add_string 'owe_transition_bssid:macaddr' 'owe_transition_ssid:string'
-}
-
-hostapd_set_bss_options() {
- local var="$1"
- local phy="$2"
- local vif="$3"
-
- wireless_vif_parse_encryption
-
- local bss_conf bss_md5sum
- local wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey wpa_key_mgmt
-
- json_get_vars \
- wep_rekey wpa_group_rekey wpa_pair_rekey wpa_master_rekey wpa_strict_rekey \
- wpa_disable_eapol_key_retries tdls_prohibit \
- maxassoc max_inactivity disassoc_low_ack isolate auth_cache \
- wps_pushbutton wps_label ext_registrar wps_pbc_in_m1 wps_ap_setup_locked \
- wps_independent wps_device_type wps_device_name wps_manufacturer wps_pin \
- macfilter ssid utf8_ssid wmm uapsd hidden short_preamble rsn_preauth \
- iapp_interface eapol_version dynamic_vlan ieee80211w nasid \
- acct_server acct_secret acct_port acct_interval \
- bss_load_update_period chan_util_avg_period sae_require_mfp \
- multi_ap multi_ap_backhaul_ssid multi_ap_backhaul_key
-
- set_default isolate 0
- set_default maxassoc 0
- set_default max_inactivity 0
- set_default short_preamble 1
- set_default disassoc_low_ack 1
- set_default hidden 0
- set_default wmm 1
- set_default uapsd 1
- set_default wpa_disable_eapol_key_retries 0
- set_default tdls_prohibit 0
- set_default eapol_version 0
- set_default acct_port 1813
- set_default bss_load_update_period 60
- set_default chan_util_avg_period 600
- set_default utf8_ssid 1
- set_default multi_ap 0
-
- append bss_conf "ctrl_interface=/var/run/hostapd"
- if [ "$isolate" -gt 0 ]; then
- append bss_conf "ap_isolate=$isolate" "$N"
- fi
- if [ "$maxassoc" -gt 0 ]; then
- append bss_conf "max_num_sta=$maxassoc" "$N"
- fi
- if [ "$max_inactivity" -gt 0 ]; then
- append bss_conf "ap_max_inactivity=$max_inactivity" "$N"
- fi
-
- append bss_conf "bss_load_update_period=$bss_load_update_period" "$N"
- append bss_conf "chan_util_avg_period=$chan_util_avg_period" "$N"
- append bss_conf "disassoc_low_ack=$disassoc_low_ack" "$N"
- append bss_conf "preamble=$short_preamble" "$N"
- append bss_conf "wmm_enabled=$wmm" "$N"
- append bss_conf "ignore_broadcast_ssid=$hidden" "$N"
- append bss_conf "uapsd_advertisement_enabled=$uapsd" "$N"
- append bss_conf "utf8_ssid=$utf8_ssid" "$N"
- append bss_conf "multi_ap=$multi_ap" "$N"
-
- [ "$tdls_prohibit" -gt 0 ] && append bss_conf "tdls_prohibit=$tdls_prohibit" "$N"
-
- [ "$wpa" -gt 0 ] && {
- [ -n "$wpa_group_rekey" ] && append bss_conf "wpa_group_rekey=$wpa_group_rekey" "$N"
- [ -n "$wpa_pair_rekey" ] && append bss_conf "wpa_ptk_rekey=$wpa_pair_rekey" "$N"
- [ -n "$wpa_master_rekey" ] && append bss_conf "wpa_gmk_rekey=$wpa_master_rekey" "$N"
- [ -n "$wpa_strict_rekey" ] && append bss_conf "wpa_strict_rekey=$wpa_strict_rekey" "$N"
- }
-
- [ -n "$nasid" ] && append bss_conf "nas_identifier=$nasid" "$N"
- [ -n "$acct_server" ] && {
- append bss_conf "acct_server_addr=$acct_server" "$N"
- append bss_conf "acct_server_port=$acct_port" "$N"
- [ -n "$acct_secret" ] && \
- append bss_conf "acct_server_shared_secret=$acct_secret" "$N"
- [ -n "$acct_interval" ] && \
- append bss_conf "radius_acct_interim_interval=$acct_interval" "$N"
- }
-
- case "$auth_type" in
- sae|owe|eap192|eap-eap192)
- set_default ieee80211w 2
- set_default sae_require_mfp 1
- ;;
- psk-sae)
- set_default ieee80211w 1
- set_default sae_require_mfp 1
- ;;
- esac
- [ -n "$sae_require_mfp" ] && append bss_conf "sae_require_mfp=$sae_require_mfp" "$N"
-
- local vlan_possible=""
-
- case "$auth_type" in
- none|owe)
- json_get_vars owe_transition_bssid owe_transition_ssid
-
- [ -n "$owe_transition_ssid" ] && append bss_conf "owe_transition_ssid=\"$owe_transition_ssid\"" "$N"
- [ -n "$owe_transition_bssid" ] && append bss_conf "owe_transition_bssid=$owe_transition_bssid" "$N"
-
- wps_possible=1
- # Here we make the assumption that if we're in open mode
- # with WPS enabled, we got to be in unconfigured state.
- wps_not_configured=1
- ;;
- psk|sae|psk-sae)
- json_get_vars key wpa_psk_file
- if [ ${#key} -lt 8 ]; then
- wireless_setup_vif_failed INVALID_WPA_PSK
- return 1
- elif [ ${#key} -eq 64 ]; then
- append bss_conf "wpa_psk=$key" "$N"
- else
- append bss_conf "wpa_passphrase=$key" "$N"
- fi
- [ -n "$wpa_psk_file" ] && {
- [ -e "$wpa_psk_file" ] || touch "$wpa_psk_file"
- append bss_conf "wpa_psk_file=$wpa_psk_file" "$N"
- }
- [ "$eapol_version" -ge "1" -a "$eapol_version" -le "2" ] && append bss_conf "eapol_version=$eapol_version" "$N"
-
- wps_possible=1
- ;;
- eap|eap192|eap-eap192)
- json_get_vars \
- auth_server auth_secret auth_port \
- dae_client dae_secret dae_port \
- ownip radius_client_addr \
- eap_reauth_period
-
- # radius can provide VLAN ID for clients
- vlan_possible=1
-
- # legacy compatibility
- [ -n "$auth_server" ] || json_get_var auth_server server
- [ -n "$auth_port" ] || json_get_var auth_port port
- [ -n "$auth_secret" ] || json_get_var auth_secret key
-
- set_default auth_port 1812
- set_default dae_port 3799
-
-
- append bss_conf "auth_server_addr=$auth_server" "$N"
- append bss_conf "auth_server_port=$auth_port" "$N"
- append bss_conf "auth_server_shared_secret=$auth_secret" "$N"
-
- [ -n "$eap_reauth_period" ] && append bss_conf "eap_reauth_period=$eap_reauth_period" "$N"
-
- [ -n "$dae_client" -a -n "$dae_secret" ] && {
- append bss_conf "radius_das_port=$dae_port" "$N"
- append bss_conf "radius_das_client=$dae_client $dae_secret" "$N"
- }
-
- [ -n "$ownip" ] && append bss_conf "own_ip_addr=$ownip" "$N"
- [ -n "$radius_client_addr" ] && append bss_conf "radius_client_addr=$radius_client_addr" "$N"
- append bss_conf "eapol_key_index_workaround=1" "$N"
- append bss_conf "ieee8021x=1" "$N"
-
- [ "$eapol_version" -ge "1" -a "$eapol_version" -le "2" ] && append bss_conf "eapol_version=$eapol_version" "$N"
- ;;
- wep)
- local wep_keyidx=0
- json_get_vars key
- hostapd_append_wep_key bss_conf
- append bss_conf "wep_default_key=$wep_keyidx" "$N"
- [ -n "$wep_rekey" ] && append bss_conf "wep_rekey_period=$wep_rekey" "$N"
- ;;
- esac
-
- local auth_algs=$((($auth_mode_shared << 1) | $auth_mode_open))
- append bss_conf "auth_algs=${auth_algs:-1}" "$N"
- append bss_conf "wpa=$wpa" "$N"
- [ -n "$wpa_pairwise" ] && append bss_conf "wpa_pairwise=$wpa_pairwise" "$N"
-
- set_default wps_pushbutton 0
- set_default wps_label 0
- set_default wps_pbc_in_m1 0
-
- config_methods=
- [ "$wps_pushbutton" -gt 0 ] && append config_methods push_button
- [ "$wps_label" -gt 0 ] && append config_methods label
-
- # WPS not possible on Multi-AP backhaul-only SSID
- [ "$multi_ap" = 1 ] && wps_possible=
-
- [ -n "$wps_possible" -a -n "$config_methods" ] && {
- set_default ext_registrar 0
- set_default wps_device_type "6-0050F204-1"
- set_default wps_device_name "OpenWrt AP"
- set_default wps_manufacturer "www.openwrt.org"
- set_default wps_independent 1
-
- wps_state=2
- [ -n "$wps_configured" ] && wps_state=1
-
- [ "$ext_registrar" -gt 0 -a -n "$network_bridge" ] && append bss_conf "upnp_iface=$network_bridge" "$N"
-
- append bss_conf "eap_server=1" "$N"
- [ -n "$wps_pin" ] && append bss_conf "ap_pin=$wps_pin" "$N"
- append bss_conf "wps_state=$wps_state" "$N"
- append bss_conf "device_type=$wps_device_type" "$N"
- append bss_conf "device_name=$wps_device_name" "$N"
- append bss_conf "manufacturer=$wps_manufacturer" "$N"
- append bss_conf "config_methods=$config_methods" "$N"
- append bss_conf "wps_independent=$wps_independent" "$N"
- [ -n "$wps_ap_setup_locked" ] && append bss_conf "ap_setup_locked=$wps_ap_setup_locked" "$N"
- [ "$wps_pbc_in_m1" -gt 0 ] && append bss_conf "pbc_in_m1=$wps_pbc_in_m1" "$N"
- [ "$multi_ap" -gt 0 ] && [ -n "$multi_ap_backhaul_ssid" ] && {
- append bss_conf "multi_ap_backhaul_ssid=\"$multi_ap_backhaul_ssid\"" "$N"
- if [ -z "$multi_ap_backhaul_key" ]; then
- :
- elif [ ${#multi_ap_backhaul_key} -lt 8 ]; then
- wireless_setup_vif_failed INVALID_WPA_PSK
- return 1
- elif [ ${#multi_ap_backhaul_key} -eq 64 ]; then
- append bss_conf "multi_ap_backhaul_wpa_psk=$multi_ap_backhaul_key" "$N"
- else
- append bss_conf "multi_ap_backhaul_wpa_passphrase=$multi_ap_backhaul_key" "$N"
- fi
- }
- }
-
- append bss_conf "ssid=$ssid" "$N"
- [ -n "$network_bridge" ] && append bss_conf "bridge=$network_bridge" "$N"
- [ -n "$iapp_interface" ] && {
- local ifname
- network_get_device ifname "$iapp_interface" || ifname="$iapp_interface"
- append bss_conf "iapp_interface=$ifname" "$N"
- }
-
- json_get_vars ieee80211v
- set_default ieee80211v 0
- if [ "$ieee80211v" -eq "1" ]; then
- json_get_vars time_advertisement time_zone wnm_sleep_mode bss_transition
-
- set_default time_advertisement 0
- set_default wnm_sleep_mode 0
- set_default bss_transition 0
-
- append bss_conf "time_advertisement=$time_advertisement" "$N"
- [ -n "$time_zone" ] && append bss_conf "time_zone=$time_zone" "$N"
- append bss_conf "wnm_sleep_mode=$wnm_sleep_mode" "$N"
- append bss_conf "bss_transition=$bss_transition" "$N"
- fi
-
- json_get_vars ieee80211k
- set_default ieee80211k 0
- if [ "$ieee80211k" -eq "1" ]; then
- json_get_vars rrm_neighbor_report rrm_beacon_report
-
- set_default rrm_neighbor_report 1
- set_default rrm_beacon_report 1
- append bss_conf "rrm_neighbor_report=$rrm_neighbor_report" "$N"
- append bss_conf "rrm_beacon_report=$rrm_beacon_report" "$N"
- fi
-
- if [ "$wpa" -ge "1" ]; then
- json_get_vars ieee80211r
- set_default ieee80211r 0
-
- if [ "$ieee80211r" -gt "0" ]; then
- json_get_vars mobility_domain ft_psk_generate_local ft_over_ds reassociation_deadline
-
- set_default mobility_domain "$(echo "$ssid" | md5sum | head -c 4)"
- set_default ft_over_ds 1
- set_default reassociation_deadline 1000
-
- case "$auth_type" in
- psk|sae|psk-sae)
- set_default ft_psk_generate_local 1
- ;;
- *)
- set_default ft_psk_generate_local 0
- ;;
- esac
-
- append bss_conf "mobility_domain=$mobility_domain" "$N"
- append bss_conf "ft_psk_generate_local=$ft_psk_generate_local" "$N"
- append bss_conf "ft_over_ds=$ft_over_ds" "$N"
- append bss_conf "reassociation_deadline=$reassociation_deadline" "$N"
- [ -n "$nasid" ] || append bss_conf "nas_identifier=${macaddr//\:}" "$N"
-
- if [ "$ft_psk_generate_local" -eq "0" ]; then
- json_get_vars r0_key_lifetime r1_key_holder pmk_r1_push
- json_get_values r0kh r0kh
- json_get_values r1kh r1kh
-
- set_default r0_key_lifetime 10000
- set_default pmk_r1_push 0
-
- [ -n "$r1_key_holder" ] && append bss_conf "r1_key_holder=$r1_key_holder" "$N"
- append bss_conf "r0_key_lifetime=$r0_key_lifetime" "$N"
- append bss_conf "pmk_r1_push=$pmk_r1_push" "$N"
-
- for kh in $r0kh; do
- append bss_conf "r0kh=${kh//,/ }" "$N"
- done
- for kh in $r1kh; do
- append bss_conf "r1kh=${kh//,/ }" "$N"
- done
- fi
- fi
-
- append bss_conf "wpa_disable_eapol_key_retries=$wpa_disable_eapol_key_retries" "$N"
-
- hostapd_append_wpa_key_mgmt
- [ -n "$wpa_key_mgmt" ] && append bss_conf "wpa_key_mgmt=$wpa_key_mgmt" "$N"
- fi
-
- if [ "$wpa" -ge "2" ]; then
- if [ -n "$network_bridge" -a "$rsn_preauth" = 1 ]; then
- set_default auth_cache 1
- append bss_conf "rsn_preauth=1" "$N"
- append bss_conf "rsn_preauth_interfaces=$network_bridge" "$N"
- else
- case "$auth_type" in
- sae|psk-sae|owe)
- set_default auth_cache 1
- ;;
- *)
- set_default auth_cache 0
- ;;
- esac
- fi
-
- append bss_conf "okc=$auth_cache" "$N"
- [ "$auth_cache" = 0 ] && append bss_conf "disable_pmksa_caching=1" "$N"
-
- # RSN -> allow management frame protection
- case "$ieee80211w" in
- [012])
- json_get_vars ieee80211w_mgmt_cipher ieee80211w_max_timeout ieee80211w_retry_timeout
- append bss_conf "ieee80211w=$ieee80211w" "$N"
- [ "$ieee80211w" -gt "0" ] && {
- append bss_conf "group_mgmt_cipher=${ieee80211w_mgmt_cipher:-AES-128-CMAC}" "$N"
- [ -n "$ieee80211w_max_timeout" ] && \
- append bss_conf "assoc_sa_query_max_timeout=$ieee80211w_max_timeout" "$N"
- [ -n "$ieee80211w_retry_timeout" ] && \
- append bss_conf "assoc_sa_query_retry_timeout=$ieee80211w_retry_timeout" "$N"
- }
- ;;
- esac
- fi
-
- _macfile="/var/run/hostapd-$ifname.maclist"
- case "$macfilter" in
- allow)
- append bss_conf "macaddr_acl=1" "$N"
- append bss_conf "accept_mac_file=$_macfile" "$N"
- # accept_mac_file can be used to set MAC to VLAN ID mapping
- vlan_possible=1
- ;;
- deny)
- append bss_conf "macaddr_acl=0" "$N"
- append bss_conf "deny_mac_file=$_macfile" "$N"
- ;;
- *)
- _macfile=""
- ;;
- esac
-
- [ -n "$_macfile" ] && {
- json_get_vars macfile
- json_get_values maclist maclist
-
- rm -f "$_macfile"
- (
- for mac in $maclist; do
- echo "$mac"
- done
- [ -n "$macfile" -a -f "$macfile" ] && cat "$macfile"
- ) > "$_macfile"
- }
-
- [ -n "$vlan_possible" -a -n "$dynamic_vlan" ] && {
- json_get_vars vlan_naming vlan_tagged_interface vlan_bridge vlan_file
- set_default vlan_naming 1
- append bss_conf "dynamic_vlan=$dynamic_vlan" "$N"
- append bss_conf "vlan_naming=$vlan_naming" "$N"
- [ -n "$vlan_bridge" ] && \
- append bss_conf "vlan_bridge=$vlan_bridge" "$N"
- [ -n "$vlan_tagged_interface" ] && \
- append bss_conf "vlan_tagged_interface=$vlan_tagged_interface" "$N"
- [ -n "$vlan_file" ] && {
- [ -e "$vlan_file" ] || touch "$vlan_file"
- append bss_conf "vlan_file=$vlan_file" "$N"
- }
- }
-
- bss_md5sum=$(echo $bss_conf | md5sum | cut -d" " -f1)
- append bss_conf "config_id=$bss_md5sum" "$N"
-
- append "$var" "$bss_conf" "$N"
- return 0
-}
-
-hostapd_set_log_options() {
- local var="$1"
-
- local log_level log_80211 log_8021x log_radius log_wpa log_driver log_iapp log_mlme
- json_get_vars log_level log_80211 log_8021x log_radius log_wpa log_driver log_iapp log_mlme
-
- set_default log_level 2
- set_default log_80211 1
- set_default log_8021x 1
- set_default log_radius 1
- set_default log_wpa 1
- set_default log_driver 1
- set_default log_iapp 1
- set_default log_mlme 1
-
- local log_mask=$(( \
- ($log_80211 << 0) | \
- ($log_8021x << 1) | \
- ($log_radius << 2) | \
- ($log_wpa << 3) | \
- ($log_driver << 4) | \
- ($log_iapp << 5) | \
- ($log_mlme << 6) \
- ))
-
- append "$var" "logger_syslog=$log_mask" "$N"
- append "$var" "logger_syslog_level=$log_level" "$N"
- append "$var" "logger_stdout=$log_mask" "$N"
- append "$var" "logger_stdout_level=$log_level" "$N"
-
- return 0
-}
-
-_wpa_supplicant_common() {
- local ifname="$1"
-
- _rpath="/var/run/wpa_supplicant"
- _config="${_rpath}-$ifname.conf"
-}
-
-wpa_supplicant_teardown_interface() {
- _wpa_supplicant_common "$1"
- rm -rf "$_rpath/$1" "$_config"
-}
-
-wpa_supplicant_prepare_interface() {
- local ifname="$1"
- _w_driver="$2"
-
- _wpa_supplicant_common "$1"
-
- json_get_vars mode wds multi_ap
-
- [ -n "$network_bridge" ] && {
- fail=
- case "$mode" in
- adhoc)
- fail=1
- ;;
- sta)
- [ "$wds" = 1 -o "$multi_ap" = 1 ] || fail=1
- ;;
- esac
-
- [ -n "$fail" ] && {
- wireless_setup_vif_failed BRIDGE_NOT_ALLOWED
- return 1
- }
- }
-
- local ap_scan=
-
- _w_mode="$mode"
-
- [ "$mode" = adhoc ] && {
- ap_scan="ap_scan=2"
- }
-
- local country_str=
- [ -n "$country" ] && {
- country_str="country=$country"
- }
-
- multiap_flag_file="${_config}.is_multiap"
- if [ "$multi_ap" = "1" ]; then
- touch "$multiap_flag_file"
- else
- [ -e "$multiap_flag_file" ] && rm "$multiap_flag_file"
- fi
- wpa_supplicant_teardown_interface "$ifname"
- cat > "$_config" <<EOF
-$ap_scan
-$country_str
-EOF
- return 0
-}
-
-wpa_supplicant_set_fixed_freq() {
- local freq="$1"
- local htmode="$2"
-
- append network_data "fixed_freq=1" "$N$T"
- append network_data "frequency=$freq" "$N$T"
- case "$htmode" in
- NOHT) append network_data "disable_ht=1" "$N$T";;
- HT20|VHT20) append network_data "disable_ht40=1" "$N$T";;
- HT40*|VHT40*|VHT80*|VHT160*) append network_data "ht40=1" "$N$T";;
- esac
- case "$htmode" in
- VHT*) append network_data "vht=1" "$N$T";;
- esac
- case "$htmode" in
- VHT80) append network_data "max_oper_chwidth=1" "$N$T";;
- VHT160) append network_data "max_oper_chwidth=2" "$N$T";;
- *) append network_data "max_oper_chwidth=0" "$N$T";;
- esac
-}
-
-wpa_supplicant_add_network() {
- local ifname="$1"
- local freq="$2"
- local htmode="$3"
- local noscan="$4"
-
- _wpa_supplicant_common "$1"
- wireless_vif_parse_encryption
-
- json_get_vars \
- ssid bssid key \
- basic_rate mcast_rate \
- ieee80211w ieee80211r \
- multi_ap
-
- case "$auth_type" in
- sae|owe|eap192|eap-eap192)
- set_default ieee80211w 2
- ;;
- psk-sae)
- set_default ieee80211w 1
- ;;
- esac
-
- set_default ieee80211r 0
- set_default multi_ap 0
-
- local key_mgmt='NONE'
- local enc_str=
- local network_data=
- local T=" "
-
- local scan_ssid="scan_ssid=1"
- local freq wpa_key_mgmt
-
- [ "$_w_mode" = "adhoc" ] && {
- append network_data "mode=1" "$N$T"
- [ -n "$freq" ] && wpa_supplicant_set_fixed_freq "$freq" "$htmode"
- [ "$noscan" = "1" ] && append network_data "noscan=1" "$N$T"
-
- scan_ssid="scan_ssid=0"
-
- [ "$_w_driver" = "nl80211" ] || append wpa_key_mgmt "WPA-NONE"
- }
-
- [ "$_w_mode" = "mesh" ] && {
- json_get_vars mesh_id mesh_fwding mesh_rssi_threshold
- [ -n "$mesh_id" ] && ssid="${mesh_id}"
-
- append network_data "mode=5" "$N$T"
- [ -n "$mesh_fwding" ] && append network_data "mesh_fwding=${mesh_fwding}" "$N$T"
- [ -n "$mesh_rssi_threshold" ] && append network_data "mesh_rssi_threshold=${mesh_rssi_threshold}" "$N$T"
- [ -n "$freq" ] && wpa_supplicant_set_fixed_freq "$freq" "$htmode"
- [ "$noscan" = "1" ] && append network_data "noscan=1" "$N$T"
- append wpa_key_mgmt "SAE"
- scan_ssid=""
- }
-
- [ "$multi_ap" = 1 -a "$_w_mode" = "sta" ] && append network_data "multi_ap_backhaul_sta=1" "$N$T"
-
- case "$auth_type" in
- none) ;;
- owe)
- hostapd_append_wpa_key_mgmt
- key_mgmt="$wpa_key_mgmt"
- ;;
- wep)
- local wep_keyidx=0
- hostapd_append_wep_key network_data
- append network_data "wep_tx_keyidx=$wep_keyidx" "$N$T"
- ;;
- wps)
- key_mgmt='WPS'
- ;;
- psk|sae|psk-sae)
- local passphrase
-
- if [ "$_w_mode" != "mesh" ]; then
- hostapd_append_wpa_key_mgmt
- fi
-
- key_mgmt="$wpa_key_mgmt"
-
- if [ ${#key} -eq 64 ]; then
- passphrase="psk=${key}"
- else
- if [ "$_w_mode" = "mesh" ]; then
- passphrase="sae_password=\"${key}\""
- else
- passphrase="psk=\"${key}\""
- fi
- fi
- append network_data "$passphrase" "$N$T"
- ;;
- eap|eap192|eap-eap192)
- hostapd_append_wpa_key_mgmt
- key_mgmt="$wpa_key_mgmt"
-
- json_get_vars eap_type identity anonymous_identity ca_cert ca_cert_usesystem
-
- if [ "$ca_cert_usesystem" -eq "1" -a -f "/etc/ssl/certs/ca-certificates.crt" ]; then
- append network_data "ca_cert=\"/etc/ssl/certs/ca-certificates.crt\"" "$N$T"
- else
- [ -n "$ca_cert" ] && append network_data "ca_cert=\"$ca_cert\"" "$N$T"
- fi
- [ -n "$identity" ] && append network_data "identity=\"$identity\"" "$N$T"
- [ -n "$anonymous_identity" ] && append network_data "anonymous_identity=\"$anonymous_identity\"" "$N$T"
- case "$eap_type" in
- tls)
- json_get_vars client_cert priv_key priv_key_pwd
- append network_data "client_cert=\"$client_cert\"" "$N$T"
- append network_data "private_key=\"$priv_key\"" "$N$T"
- append network_data "private_key_passwd=\"$priv_key_pwd\"" "$N$T"
-
- json_get_vars subject_match
- [ -n "$subject_match" ] && append network_data "subject_match=\"$subject_match\"" "$N$T"
-
- json_get_values altsubject_match altsubject_match
- if [ -n "$altsubject_match" ]; then
- local list=
- for x in $altsubject_match; do
- append list "$x" ";"
- done
- append network_data "altsubject_match=\"$list\"" "$N$T"
- fi
-
- json_get_values domain_match domain_match
- if [ -n "$domain_match" ]; then
- local list=
- for x in $domain_match; do
- append list "$x" ";"
- done
- append network_data "domain_match=\"$list\"" "$N$T"
- fi
-
- json_get_values domain_suffix_match domain_suffix_match
- if [ -n "$domain_suffix_match" ]; then
- local list=
- for x in $domain_suffix_match; do
- append list "$x" ";"
- done
- append network_data "domain_suffix_match=\"$list\"" "$N$T"
- fi
- ;;
- fast|peap|ttls)
- json_get_vars auth password ca_cert2 ca_cert2_usesystem client_cert2 priv_key2 priv_key2_pwd
- set_default auth MSCHAPV2
-
- if [ "$auth" = "EAP-TLS" ]; then
- if [ "$ca_cert2_usesystem" -eq "1" -a -f "/etc/ssl/certs/ca-certificates.crt" ]; then
- append network_data "ca_cert2=\"/etc/ssl/certs/ca-certificates.crt\"" "$N$T"
- else
- [ -n "$ca_cert2" ] && append network_data "ca_cert2=\"$ca_cert2\"" "$N$T"
- fi
- append network_data "client_cert2=\"$client_cert2\"" "$N$T"
- append network_data "private_key2=\"$priv_key2\"" "$N$T"
- append network_data "private_key2_passwd=\"$priv_key2_pwd\"" "$N$T"
- else
- append network_data "password=\"$password\"" "$N$T"
- fi
-
- json_get_vars subject_match
- [ -n "$subject_match" ] && append network_data "subject_match=\"$subject_match\"" "$N$T"
-
- json_get_values altsubject_match altsubject_match
- if [ -n "$altsubject_match" ]; then
- local list=
- for x in $altsubject_match; do
- append list "$x" ";"
- done
- append network_data "altsubject_match=\"$list\"" "$N$T"
- fi
-
- json_get_values domain_match domain_match
- if [ -n "$domain_match" ]; then
- local list=
- for x in $domain_match; do
- append list "$x" ";"
- done
- append network_data "domain_match=\"$list\"" "$N$T"
- fi
-
- json_get_values domain_suffix_match domain_suffix_match
- if [ -n "$domain_suffix_match" ]; then
- local list=
- for x in $domain_suffix_match; do
- append list "$x" ";"
- done
- append network_data "domain_suffix_match=\"$list\"" "$N$T"
- fi
-
- phase2proto="auth="
- case "$auth" in
- "auth"*)
- phase2proto=""
- ;;
- "EAP-"*)
- auth="$(echo $auth | cut -b 5- )"
- [ "$eap_type" = "ttls" ] &&
- phase2proto="autheap="
- json_get_vars subject_match2
- [ -n "$subject_match2" ] && append network_data "subject_match2=\"$subject_match2\"" "$N$T"
-
- json_get_values altsubject_match2 altsubject_match2
- if [ -n "$altsubject_match2" ]; then
- local list=
- for x in $altsubject_match2; do
- append list "$x" ";"
- done
- append network_data "altsubject_match2=\"$list\"" "$N$T"
- fi
-
- json_get_values domain_match2 domain_match2
- if [ -n "$domain_match2" ]; then
- local list=
- for x in $domain_match2; do
- append list "$x" ";"
- done
- append network_data "domain_match2=\"$list\"" "$N$T"
- fi
-
- json_get_values domain_suffix_match2 domain_suffix_match2
- if [ -n "$domain_suffix_match2" ]; then
- local list=
- for x in $domain_suffix_match2; do
- append list "$x" ";"
- done
- append network_data "domain_suffix_match2=\"$list\"" "$N$T"
- fi
- ;;
- esac
- append network_data "phase2=\"$phase2proto$auth\"" "$N$T"
- ;;
- esac
- append network_data "eap=$(echo $eap_type | tr 'a-z' 'A-Z')" "$N$T"
- ;;
- esac
-
- [ "$mode" = mesh ] || {
- case "$wpa" in
- 1)
- append network_data "proto=WPA" "$N$T"
- ;;
- 2)
- append network_data "proto=RSN" "$N$T"
- ;;
- esac
-
- case "$ieee80211w" in
- [012])
- [ "$wpa" -ge 2 ] && append network_data "ieee80211w=$ieee80211w" "$N$T"
- ;;
- esac
- }
- [ -n "$bssid" ] && append network_data "bssid=$bssid" "$N$T"
- [ -n "$beacon_int" ] && append network_data "beacon_int=$beacon_int" "$N$T"
-
- local bssid_blacklist bssid_whitelist
- json_get_values bssid_blacklist bssid_blacklist
- json_get_values bssid_whitelist bssid_whitelist
-
- [ -n "$bssid_blacklist" ] && append network_data "bssid_blacklist=$bssid_blacklist" "$N$T"
- [ -n "$bssid_whitelist" ] && append network_data "bssid_whitelist=$bssid_whitelist" "$N$T"
-
- [ -n "$basic_rate" ] && {
- local br rate_list=
- for br in $basic_rate; do
- wpa_supplicant_add_rate rate_list "$br"
- done
- [ -n "$rate_list" ] && append network_data "rates=$rate_list" "$N$T"
- }
-
- [ -n "$mcast_rate" ] && {
- local mc_rate=
- wpa_supplicant_add_rate mc_rate "$mcast_rate"
- append network_data "mcast_rate=$mc_rate" "$N$T"
- }
-
- if [ "$key_mgnt" = "WPS" ]; then
- echo "wps_cred_processing=1" >> "$_config"
- else
- cat >> "$_config" <<EOF
-network={
- $scan_ssid
- ssid="$ssid"
- key_mgmt=$key_mgmt
- $network_data
-}
-EOF
- fi
- return 0
-}
-
-wpa_supplicant_run() {
- local ifname="$1"
- local hostapd_ctrl="$2"
-
- _wpa_supplicant_common "$ifname"
-
- ubus wait_for wpa_supplicant.$phy
- ubus call wpa_supplicant.$phy config_add "{ \
- \"driver\": \"${_w_driver:-wext}\", \"ctrl\": \"$_rpath\", \
- \"iface\": \"$ifname\", \"config\": \"$_config\" \
- ${network_bridge:+, \"bridge\": \"$network_bridge\"} \
- ${hostapd_ctrl:+, \"hostapd_ctrl\": \"$hostapd_ctrl\"} \
- }"
-
- ret="$?"
-
- [ "$ret" != 0 ] && wireless_setup_vif_failed WPA_SUPPLICANT_FAILED
-
- local supplicant_pid=$(ubus call service list '{"name": "hostapd"}' | jsonfilter -l 1 -e "@['hostapd'].instances['supplicant-${phy}'].pid")
- wireless_add_process "$supplicant_pid" "/usr/sbin/wpa_supplicant" 1
-
- return $ret
-}
-
-hostapd_common_cleanup() {
- killall meshd-nl80211
-}
projects / openwrt / openwrt.git / blobdiff