package/network/utils/iptables: fix PKG_CPE_ID

[openwrt/openwrt.git] / target / linux / ath79 / dts / ar7161_netgear_wndr3800.dts

diff --git a/target/linux/ath79/dts/ar7161_netgear_wndr3800.dts b/target/linux/ath79/dts/ar7161_netgear_wndr3800.dts
index a175fd76980a847e3920b1417f057ea701be7a9a..cf23786ae3124b3c8a586777be4dc1274c5b4734 100644 (file)
--- a/target/linux/ath79/dts/ar7161_netgear_wndr3800.dts
+++ b/target/linux/ath79/dts/ar7161_netgear_wndr3800.dts
@@ -1,192 +1,86 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar7100.dtsi"
+#include "ar7161_netgear_wndr.dtsi"
 
 / {
        compatible = "netgear,wndr3800", "qca,ar7161";
        model = "Netgear WNDR3800";
 
-       memory@0 {
-               device_type = "memory";
-               reg = <0x0 0x8000000>;
-       };
-
-       extosc: ref {
-               compatible = "fixed-clock";
-               #clock-cells = <0>;
-               clock-output-names = "ref";
-               clock-frequency = <40000000>;
+       aliases {
+               label-mac-device = &eth0;
        };
+};
 
-       reset-leds {
-               compatible = "reset-leds";
-
-               wps {
-                       label = "netgear:green:usb";
-                       resets = <&rst 12>;
-               };
+&partitions {
+       partition@0 {
+               label = "u-boot";
+               reg = <0x000000 0x050000>;
+               read-only;
        };
 
-       gpio-leds {
-               compatible = "gpio-leds";
-
-               wps {
-                       label = "netgear:orange:wps";
-                       gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
-               };
-
-               power_green {
-                       label = "netgear:green:power";
-                       gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
-               };
-
-               power_orange {
-                       label = "netgear:orange:power";
-                       gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
-               };
-
-               wps_green {
-                       label = "netgear:green:wps";
-                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
-               };
-
-               wan_green {
-                       label = "netgear:green:wan";
-                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
-                       default-state = "off";
-               };
+       partition@50000 {
+               label = "u-boot-env";
+               reg = <0x050000 0x020000>;
+               read-only;
        };
 
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <100>;
-
-               button@0 {
-                       label = "wps";
-                       linux,code = <KEY_WPS_BUTTON>;
-                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
-               };
-
-               button@1 {
-                       label = "reset";
-                       linux,code = <KEY_RESTART>;
-                       gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
-               };
-
-               button@2 {
-                       label = "wifi";
-                       linux,code = <BTN_2>;
-                       gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
-               };
+       partition@70000 {
+               label = "firmware";
+               reg = <0x070000 0xf80000>;
+               compatible = "openwrt,uimage", "denx,uimage";
+               openwrt,ih-magic = <0x33373031>;
+               openwrt,ih-type = <IH_TYPE_FILESYSTEM>;
        };
 
-       rtl8366s {
-               compatible = "realtek,rtl8366s";
-               gpio-sda = <&gpio 5 GPIO_ACTIVE_HIGH>;
-               gpio-sck = <&gpio 7 GPIO_ACTIVE_HIGH>;
-
-               mdio-bus {
-                       status = "okay";
+       art: partition@ff0000 {
+               label = "art";
+               reg = <0xff0000 0x010000>;
+               read-only;
 
-                       phy-mask = <0x10>;
-
-                       phy4: ethernet-phy@4 {
-                               reg = <4>;
-                               phy-mode = "rgmii";
-                       };
-               };
-       };
-};
-
-&usb_phy {
-       status = "okay";
-};
-
-&usb1 {
-       status = "okay";
-};
-
-&usb2 {
-       status = "okay";
-};
-
-&pcie0 {
-       status = "okay";
-};
-
-&uart {
-       status = "okay";
-};
-
-&spi {
-       status = "okay";
-       num-cs = <1>;
-
-       flash@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "mx25l12805d";
-               reg = <0>;
-               spi-max-frequency = <25000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
+               nvmem-layout {
+                       compatible = "fixed-layout";
                        #address-cells = <1>;
                        #size-cells = <1>;
 
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x000000 0x050000>;
-                               read-only;
+                       macaddr_art_0: macaddr@0 {
+                               reg = <0x0 0x6>;
+                       };
+
+                       macaddr_art_6: macaddr@6 {
+                               reg = <0x6 0x6>;
                        };
 
-                       partition@1 {
-                               label = "u-boot-env";
-                               reg = <0x050000 0x020000>;
+                       macaddr_art_c: macaddr@c {
+                               reg = <0xc 0x6>;
                        };
 
-                       partition@2 {
-                               label = "firmware";
-                               reg = <0x70000 0xf80000>;
+                       cal_art_1000: cal@1000 {
+                               reg = <0x1000 0xeb8>;
                        };
 
-                       partition@3 {
-                               label = "art";
-                               reg = <0xff0000 0x010000>;
-                               read-only;
+                       cal_art_5000: cal@5000 {
+                               reg = <0x5000 0xeb8>;
                        };
                };
        };
 };
 
-&eth0 {
-       status = "okay";
+&ath9k0 {
+       nvmem-cells = <&macaddr_art_c>, <&cal_art_1000>;
+       nvmem-cell-names = "mac-address", "calibration";
+};
 
-       pll-data = <0x11110000 0x00001099 0x00991099>;
+&ath9k1 {
+       nvmem-cells = <&macaddr_art_0>, <&cal_art_5000>;
+       nvmem-cell-names = "mac-address", "calibration";
+};
 
-       fixed-link {
-               speed = <1000>;
-               full-duplex;
-       };
+&eth0 {
+       nvmem-cells = <&macaddr_art_0>;
+       nvmem-cell-names = "mac-address";
 };
 
 &eth1 {
-       status = "okay";
-
-       pll-data = <0x11110000 0x00001099 0x00991099>;
-
-       resets = <&rst 13>;
-       reset-names = "mac";
-
-       phy-handle = <&phy4>;
+       nvmem-cells = <&macaddr_art_6>;
+       nvmem-cell-names = "mac-address";
 };