// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+#include "ar7100.dtsi"
+
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
-
-#include "ar7100.dtsi"
+#include <dt-bindings/mtd/partitions/uimage.h>
/ {
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
aliases {
led-boot = &led_rf;
led-failsafe = &led_rf;
led-upgrade = &led_rf;
};
- extosc: ref {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-output-names = "ref";
- clock-frequency = <40000000>;
- };
-
leds {
compatible = "gpio-leds";
led_rf: rf_green {
- label = "ubnt:green:rf";
+ label = "green:rf";
gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
};
};
&spi {
status = "okay";
- num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <25000000>;
partitions {
- compatible = "ecoscentric,redboot-fis-partitions";
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "RedBoot";
+ reg = <0x000000 0x030000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "loader";
+ reg = <0x030000 0x020000>;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x050000 0xfa0000>;
+ compatible = "openwrt,uimage", "denx,uimage";
+ openwrt,ih-magic = <IH_MAGIC_OKLI>;
+ };
+
+ partition@ff0000 {
+ label = "FIS directory";
+ reg = <0xff0000 0x00f000>;
+ read-only;
+ };
+
+ partition@fff000 {
+ label = "RedBoot config";
+ reg = <0xfff000 0x001000>;
+ read-only;
+ };
};
};
};
-&uart {
- status = "okay";
-};
-
&usb_phy {
status = "okay";
};
&usb1 {
status = "okay";
- #address-cells = <1>;
- #size-cells = <0>;
-
- usb_ochi_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};
&usb2 {
status = "okay";
- #address-cells = <1>;
- #size-cells = <0>;
-
- usb_echi_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
};