package/network/utils/iptables: fix PKG_CPE_ID
[openwrt/openwrt.git] / target / linux / ath79 / dts / ar9341_tplink_tl-wr842n-v2.dts
index cb6b25e6646220dd2ce470e150138e05a35c0c09..3efd8242469b0b8d35986bf20e26081cf39b1c32 100644 (file)
@@ -1,11 +1,17 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
+#include <dt-bindings/leds/common.h>
+
 #include "ar9341_tplink.dtsi"
 
 / {
        model = "TP-Link TL-WR842N/ND v2";
        compatible = "tplink,tl-wr842n-v2", "qca,ar9341";
 
+       aliases {
+               label-mac-device = &wmac;
+       };
+
        keys {
                compatible = "gpio-keys";
 
@@ -37,7 +43,8 @@
 
 &leds {
        usb {
-               label = "green:usb";
+               function = LED_FUNCTION_USB;
+               color = <LED_COLOR_ID_GREEN>;
                gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
                trigger-sources = <&hub_port>;
                linux,default-trigger = "usbport";
@@ -47,8 +54,6 @@
 &spi {
        status = "okay";
 
-       num-cs = <1>;
-
        flash@0 {
                compatible = "jedec,spi-nor";
                reg = <0>;
                                label = "u-boot";
                                reg = <0x000000 0x020000>;
                                read-only;
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       macaddr_uboot_1fc00: macaddr@1fc00 {
+                                               compatible = "mac-base";
+                                               reg = <0x1fc00 0x6>;
+                                               #nvmem-cell-cells = <1>;
+                                       };
+                               };
                        };
 
                        partition@20000 {
 };
 
 &usb {
-       #address-cells = <1>;
-       #size-cells = <0>;
        status = "okay";
-
-       hub_port: port@1 {
-               reg = <1>;
-               #trigger-source-cells = <0>;
-       };
 };
 
 &usb_phy {
        status = "okay";
 };
 
+&eth0 {
+       nvmem-cells = <&macaddr_uboot_1fc00 (-1)>;
+       nvmem-cell-names = "mac-address";
+};
+
 &eth1 {
        phy-handle = <&swphy4>;
+
+       nvmem-cells = <&macaddr_uboot_1fc00 0>;
+       nvmem-cell-names = "mac-address";
+};
+
+&wmac {
+       mtd-cal-data = <&art 0x1000>;
+
+       nvmem-cells = <&macaddr_uboot_1fc00 0>;
+       nvmem-cell-names = "mac-address";
 };