qualcommax: ipq807x: uboot-envtools: yuncore ax880

[openwrt/openwrt.git] / target / linux / ath79 / dts / qca9531_tplink_tl-mr3420-v3.dts

diff --git a/target/linux/ath79/dts/qca9531_tplink_tl-mr3420-v3.dts b/target/linux/ath79/dts/qca9531_tplink_tl-mr3420-v3.dts
index 4c730375a69e6fe5085ab21396e9917512cd1672..be1dc66aff6f4ea78ba7b5fce2bc951791a16471 100644 (file)
--- a/target/linux/ath79/dts/qca9531_tplink_tl-mr3420-v3.dts
+++ b/target/linux/ath79/dts/qca9531_tplink_tl-mr3420-v3.dts
@@ -4,6 +4,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 
 / {
        compatible = "tplink,tl-mr3420-v3", "qca,qca9531";
@@ -84,25 +85,29 @@
                };
 
                wan {
-                       label = "green:wan";
+                       function = LED_FUNCTION_WAN;
+                       color = <LED_COLOR_ID_GREEN>;
                        gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
                };
 
                wan_fail {
-                       label = "orange:wan";
+                       function = LED_FUNCTION_WAN;
+                       color = <LED_COLOR_ID_ORANGE>;
                        gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
                };
 
                wlan {
-                       label = "green:wlan";
+                       function = LED_FUNCTION_WLAN;
+                       color = <LED_COLOR_ID_GREEN>;
                        gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
                        linux,default-trigger = "phy0tpt";
                };
 
                usb {
-                       label = "green:usb";
+                       function = LED_FUNCTION_USB;
+                       color = <LED_COLOR_ID_GREEN>;
                        gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
-                       trigger-sources = <&hub_port>;
+                       trigger-sources = <&hub_port0>;
                        linux,default-trigger = "usbport";
                };
 
@@ -149,6 +154,18 @@
                                label = "u-boot";
                                reg = <0x000000 0x020000>;
                                read-only;
+
+                               nvmem-layout {
+                                       compatible = "fixed-layout";
+                                       #address-cells = <1>;
+                                       #size-cells = <1>;
+
+                                       macaddr_uboot_1fc00: macaddr@1fc00 {
+                                               compatible = "mac-base";
+                                               reg = <0x1fc00 0x6>;
+                                               #nvmem-cell-cells = <1>;
+                                       };
+                               };
                        };
 
                        partition@20000 {
@@ -171,30 +188,25 @@
 
        phy-handle = <&swphy4>;
 
-       mtd-mac-address = <&uboot 0x1fc00>;
-       mac-address-increment = <1>;
+       nvmem-cells = <&macaddr_uboot_1fc00 1>;
+       nvmem-cell-names = "mac-address";
 };
 
 &eth1 {
-       mtd-mac-address = <&uboot 0x1fc00>;
+       nvmem-cells = <&macaddr_uboot_1fc00 0>;
+       nvmem-cell-names = "mac-address";
 };
 
 &wmac {
        status = "okay";
 
        mtd-cal-data = <&art 0x1000>;
-       mtd-mac-address = <&uboot 0x1fc00>;
+       nvmem-cells = <&macaddr_uboot_1fc00 0>;
+       nvmem-cell-names = "mac-address";
 };
 
 &usb0 {
-       #address-cells = <1>;
-       #size-cells = <0>;
        status = "okay";
-
-       hub_port: port@1 {
-               reg = <1>;
-               #trigger-source-cells = <0>;
-       };
 };
 
 &usb_phy {