// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
+
+#include "qca956x.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
-
-#include "qca956x.dtsi"
+#include <dt-bindings/leds/common.h>
/ {
- chosen {
- bootargs = "console=ttyS0,115200n8";
- };
-
aliases {
- led-boot = &system;
- led-failsafe = &system;
- led-running = &system;
- led-upgrade = &system;
+ led-boot = &led_system;
+ led-failsafe = &led_system;
+ led-running = &led_system;
+ led-upgrade = &led_system;
};
- gpio_leds: leds {
+ leds: leds {
compatible = "gpio-leds";
- system: system {
- label = "tp-link:green:system";
+ led_system: system {
+ label = "green:system";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
};
wifi_green {
- label = "tp-link:green:wlan";
+ function = LED_FUNCTION_WLAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
- default-state = "off";
linux,default-trigger = "phy0tpt";
};
wifi_wps {
- label = "tp-link:green:wps";
+ function = LED_FUNCTION_WPS;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
- default-state = "off";
};
wan {
- label = "tp-link:green:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
- default-state = "off";
};
wan_fail {
- label = "tp-link:orange:wan";
+ function = LED_FUNCTION_WAN;
+ color = <LED_COLOR_ID_ORANGE>;
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
- default-state = "off";
};
lan1 {
- label = "tp-link:green:lan1";
+ label = "green:lan1";
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
- default-state = "off";
};
lan2 {
- label = "tp-link:green:lan2";
+ label = "green:lan2";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- default-state = "off";
};
lan3 {
- label = "tp-link:green:lan3";
+ label = "green:lan3";
gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
- default-state = "off";
};
lan4 {
- label = "tp-link:green:lan4";
+ label = "green:lan4";
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
- default-state = "off";
};
};
debounce-interval = <60>;
};
};
-
- gpio-export {
- compatible = "gpio-export";
- #size-cells = <0>;
-
- gpio_usb_power {
- gpio-export,name = "tp-link:power:usb";
- gpio-export,output = <1>;
- gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&uart {
- status = "okay";
-};
-
-&gpio {
- status = "okay";
-};
-
-&spi {
- status = "okay";
- num-cs = <1>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <25000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x000000 0x020000>;
- read-only;
- };
-
- partition@20000 {
- compatible = "tplink,firmware";
- label = "firmware";
- reg = <0x020000 0xf30000>;
- };
-
- info: partition@f50000 {
- label = "product-info";
- reg = <0xf50000 0x020000>;
- read-only;
- };
-
- partition@f70000 {
- label = "config";
- reg = <0xf70000 0x050000>;
- read-only;
- };
-
- partition@fc0000 {
- label = "partition-table";
- reg = <0xfc0000 0x010000>;
- read-only;
- };
-
- partition@fd0000 {
- label = "logs";
- reg = <0xfd0000 0x020000>;
- read-only;
- };
-
- art: partition@ff0000 {
- label = "ART";
- reg = <0xff0000 0x010000>;
- read-only;
- };
- };
- };
};
&mdio0 {
status = "okay";
- phy-mask = <0>;
phy0: ethernet-phy@0 {
reg = <0>;
phy-mode = "sgmii";
+ qca,mib-poll-interval = <500>;
qca,ar8327-initvals = <
0x04 0x00080080 /* PORT0 PAD MODE CTRL */
ð0 {
status = "okay";
- mtd-mac-address = <&info 0x8>;
phy-mode = "sgmii";
phy-handle = <&phy0>;
};
&wmac {
status = "okay";
- mtd-cal-data = <&art 0x1000>;
- mtd-mac-address = <&info 0x8>;
};