ipq40xx: fix I2C pin config on Aruba AP-303H

[openwrt/openwrt.git] / target / linux / ath79 / dts / qca9563_tplink_tl-wr1043n.dtsi

diff --git a/target/linux/ath79/dts/qca9563_tplink_tl-wr1043n.dtsi b/target/linux/ath79/dts/qca9563_tplink_tl-wr1043n.dtsi
index fc23ee1dd8e9dfd4063328039e1f1dfa22ddbcae..e54003cb7a85d95b3fe29477555271e889c48488 100644 (file)
--- a/target/linux/ath79/dts/qca9563_tplink_tl-wr1043n.dtsi
+++ b/target/linux/ath79/dts/qca9563_tplink_tl-wr1043n.dtsi
@@ -1,70 +1,70 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
+
+#include "qca956x.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
-
-#include "qca956x.dtsi"
+#include <dt-bindings/leds/common.h>
 
 / {
-       chosen {
-               bootargs = "console=ttyS0,115200n8";
-       };
-
        aliases {
-               led-boot = &system;
-               led-failsafe = &system;
-               led-running = &system;
-               led-upgrade = &system;
+               led-boot = &led_system;
+               led-failsafe = &led_system;
+               led-running = &led_system;
+               led-upgrade = &led_system;
        };
 
-       gpio_leds: leds {
+       leds: leds {
                compatible = "gpio-leds";
 
-               system: system {
-                       label = "tp-link:green:system";
+               led_system: system {
+                       label = "green:system";
                        gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
                        linux,default-trigger = "heartbeat";
                };
 
                wifi_green {
-                       label = "tp-link:green:wlan";
+                       function = LED_FUNCTION_WLAN;
+                       color = <LED_COLOR_ID_GREEN>;
                        gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
                        linux,default-trigger = "phy0tpt";
                };
 
                wifi_wps {
-                       label = "tp-link:green:wps";
+                       function = LED_FUNCTION_WPS;
+                       color = <LED_COLOR_ID_GREEN>;
                        gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
                };
 
                wan {
-                       label = "tp-link:green:wan";
+                       function = LED_FUNCTION_WAN;
+                       color = <LED_COLOR_ID_GREEN>;
                        gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
                };
 
                wan_fail {
-                       label = "tp-link:orange:wan";
+                       function = LED_FUNCTION_WAN;
+                       color = <LED_COLOR_ID_ORANGE>;
                        gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
                };
 
                lan1 {
-                       label = "tp-link:green:lan1";
+                       label = "green:lan1";
                        gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
                };
 
                lan2 {
-                       label = "tp-link:green:lan2";
+                       label = "green:lan2";
                        gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
                };
 
                lan3 {
-                       label = "tp-link:green:lan3";
+                       label = "green:lan3";
                        gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
                };
 
                lan4 {
-                       label = "tp-link:green:lan4";
+                       label = "green:lan4";
                        gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
                };
        };
@@ -86,93 +86,15 @@
                        debounce-interval = <60>;
                };
        };
-
-       gpio-export {
-               compatible = "gpio-export";
-               #size-cells = <0>;
-
-               gpio_usb_power {
-                       gpio-export,name = "tp-link:power:usb";
-                       gpio-export,output = <1>;
-                       gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
-               };
-       };
-};
-
-&uart {
-       status = "okay";
-};
-
-&gpio {
-       status = "okay";
-};
-
-&spi {
-       status = "okay";
-       num-cs = <1>;
-
-       flash@0 {
-               compatible = "jedec,spi-nor";
-               reg = <0>;
-               spi-max-frequency = <25000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "u-boot";
-                               reg = <0x000000 0x020000>;
-                               read-only;
-                       };
-
-                       partition@20000 {
-                               compatible = "tplink,firmware";
-                               label = "firmware";
-                               reg = <0x020000 0xf30000>;
-                       };
-
-                       info: partition@f50000 {
-                               label = "product-info";
-                               reg = <0xf50000 0x020000>;
-                               read-only;
-                       };
-
-                       partition@f70000 {
-                               label = "config";
-                               reg = <0xf70000 0x050000>;
-                               read-only;
-                       };
-
-                       partition@fc0000 {
-                               label = "partition-table";
-                               reg = <0xfc0000 0x010000>;
-                               read-only;
-                       };
-
-                       partition@fd0000 {
-                               label = "logs";
-                               reg = <0xfd0000 0x020000>;
-                               read-only;
-                       };
-
-                       art: partition@ff0000 {
-                               label = "ART";
-                               reg = <0xff0000 0x010000>;
-                               read-only;
-                       };
-               };
-       };
 };
 
 &mdio0 {
        status = "okay";
 
-       phy-mask = <0>;
        phy0: ethernet-phy@0 {
                reg = <0>;
                phy-mode = "sgmii";
+               qca,mib-poll-interval = <500>;
 
                qca,ar8327-initvals = <
                        0x04 0x00080080 /* PORT0 PAD MODE CTRL */
@@ -184,13 +106,10 @@
 &eth0 {
        status = "okay";
 
-       mtd-mac-address = <&info 0x8>;
        phy-mode = "sgmii";
        phy-handle = <&phy0>;
 };
 
 &wmac {
        status = "okay";
-       mtd-cal-data = <&art 0x1000>;
-       mtd-mac-address = <&info 0x8>;
 };