-define Device/glinet_ar300m-nand
- ATH_SOC := qca9531
- DEVICE_TITLE := GL-AR300M (NAND)
- DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage kmod-usb-ledtrig-usbport
- KERNEL_SIZE := 2048k
+define Build/dongwon-header
+ head -c 4 $@ > $@.tmp
+ head -c 8 /dev/zero >> $@.tmp
+ tail -c +9 $@ >> $@.tmp
+ ( \
+ header_crc="$$(head -c 68 $@.tmp | gzip -c | \
+ tail -c 8 | od -An -N4 -tx4 --endian little | tr -d ' \n')"; \
+ printf "$$(echo $$header_crc | sed 's/../\\x&/g')" | \
+ dd of=$@.tmp bs=4 count=1 seek=1 conv=notrunc \
+ )
+ mv $@.tmp $@
+endef
+
+define Build/meraki-header
+ -$(STAGING_DIR_HOST)/bin/mkmerakifw \
+ -B $(1) -s \
+ -i $@ \
+ -o $@.new
+ @mv $@.new $@
+endef
+
+# attention: only zlib compression is allowed for the boot fs
+define Build/zyxel-buildkerneljffs
+ mkdir -p $@.tmp/boot
+ cp $@ $@.tmp/boot/vmlinux.lzma.uImage
+ $(STAGING_DIR_HOST)/bin/mkfs.jffs2 \
+ --big-endian --squash-uids -v -e 128KiB -q -f -n -x lzma -x rtime \
+ -o $@ \
+ -d $@.tmp
+ rm -rf $@.tmp
+endef
+
+define Build/zyxel-factory
+ let \
+ maxsize="$(call exp_units,$(RAS_ROOTFS_SIZE))"; \
+ let size="$$(stat -c%s $@)"; \
+ if [ $$size -lt $$maxsize ]; then \
+ $(STAGING_DIR_HOST)/bin/mkrasimage \
+ -b $(RAS_BOARD) \
+ -v $(RAS_VERSION) \
+ -r $@ \
+ -s $$maxsize \
+ -o $@.new \
+ -l 131072 \
+ && mv $@.new $@ ; \
+ fi
+endef
+
+define Device/8dev_rambutan
+ SOC := qca9557
+ DEVICE_VENDOR := 8devices
+ DEVICE_MODEL := Rambutan
+ DEVICE_PACKAGES := kmod-usb2
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL_SIZE := 4096k
+ KERNEL_IN_UBI := 1
+ IMAGES := factory.bin sysupgrade.tar
+ IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
+ IMAGE/factory.bin := append-ubi
+endef
+TARGET_DEVICES += 8dev_rambutan
+
+define Device/aerohive_hiveap-121
+ SOC := ar9344
+ DEVICE_VENDOR := Aerohive
+ DEVICE_MODEL := HiveAP 121
+ DEVICE_PACKAGES := kmod-usb2
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ IMAGE_SIZE := 116m
+ KERNEL_SIZE := 5120k
+ UBINIZE_OPTS := -E 5
+ SUPPORTED_DEVICES += hiveap-121
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
+ check-size
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += aerohive_hiveap-121
+
+define Device/domywifi_dw33d
+ SOC := qca9558
+ DEVICE_VENDOR := DomyWifi
+ DEVICE_MODEL := DW33D
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-storage kmod-usb-ledtrig-usbport \
+ kmod-ath10k-ct ath10k-firmware-qca988x-ct
+ KERNEL_SIZE := 5120k
+ IMAGE_SIZE := 98304k
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ UBINIZE_OPTS := -E 5
+ IMAGES += factory.bin
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
+ check-size
+endef
+TARGET_DEVICES += domywifi_dw33d
+
+define Device/dongwon_dw02-412h
+ SOC := qca9557
+ DEVICE_VENDOR := Dongwon T&I
+ DEVICE_MODEL := DW02-412H
+ DEVICE_ALT0_VENDOR := KT
+ DEVICE_ALT0_MODEL := GiGA WiFi home
+ DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct
+ KERNEL_SIZE := 8192k
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL := $$(KERNEL) | dongwon-header
+ KERNEL_INITRAMFS := $$(KERNEL)
+ UBINIZE_OPTS := -E 5
+ IMAGES += factory.img
+ IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
+ check-size
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+
+define Device/dongwon_dw02-412h-64m
+ $(Device/dongwon_dw02-412h)
+ DEVICE_VARIANT := (64M)
+ DEVICE_ALT0_VARIANT := (64M)
+ IMAGE_SIZE := 49152k
+endef
+TARGET_DEVICES += dongwon_dw02-412h-64m
+
+define Device/dongwon_dw02-412h-128m
+ $(Device/dongwon_dw02-412h)
+ DEVICE_VARIANT := (128M)
+ DEVICE_ALT0_VARIANT := (128M)
+ IMAGE_SIZE := 114688k
+endef
+TARGET_DEVICES += dongwon_dw02-412h-128m
+
+define Device/glinet_gl-ar300m-common-nand
+ SOC := qca9531
+ DEVICE_VENDOR := GL.iNet
+ DEVICE_MODEL := GL-AR300M
+ DEVICE_PACKAGES := kmod-usb2
+ KERNEL_SIZE := 4096k
+ IMAGE_SIZE := 16000k
+ PAGESIZE := 2048
+ VID_HDR_OFFSET := 2048
+endef
+
+define Device/glinet_gl-ar300m-nand
+ $(Device/glinet_gl-ar300m-common-nand)
+ DEVICE_VARIANT := NAND
+ BLOCKSIZE := 128k
+ IMAGES += factory.img
+ IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ SUPPORTED_DEVICES += glinet,gl-ar300m-nor
+endef
+TARGET_DEVICES += glinet_gl-ar300m-nand
+
+define Device/glinet_gl-ar300m-nor
+ $(Device/glinet_gl-ar300m-common-nand)
+ DEVICE_VARIANT := NOR
+ SUPPORTED_DEVICES += glinet,gl-ar300m-nand gl-ar300m
+endef
+TARGET_DEVICES += glinet_gl-ar300m-nor
+
+define Device/glinet_gl-ar750s-common
+ SOC := qca9563
+ DEVICE_VENDOR := GL.iNet
+ DEVICE_MODEL := GL-AR750S
+ DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct kmod-usb2 \
+ kmod-usb-storage block-mount
+ IMAGE_SIZE := 16000k
+endef
+
+define Device/glinet_gl-ar750s-nor-nand
+ $(Device/glinet_gl-ar750s-common)
+ DEVICE_VARIANT := NOR/NAND
+ KERNEL_SIZE := 4096k
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ SUPPORTED_DEVICES += glinet,gl-ar750s-nor
+endef
+TARGET_DEVICES += glinet_gl-ar750s-nor-nand
+
+define Device/glinet_gl-ar750s-nor
+ $(Device/glinet_gl-ar750s-common)
+ DEVICE_VARIANT := NOR
+ SUPPORTED_DEVICES += gl-ar750s glinet,gl-ar750s glinet,gl-ar750s-nor-nand
+endef
+TARGET_DEVICES += glinet_gl-ar750s-nor
+
+define Device/glinet_gl-e750
+ SOC := qca9531
+ DEVICE_VENDOR := GL.iNet
+ DEVICE_MODEL := GL-E750
+ DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct kmod-usb2 \
+ kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
+ SUPPORTED_DEVICES += gl-e750
+ KERNEL_SIZE := 4096k
+ IMAGE_SIZE := 131072k
+ PAGESIZE := 2048
+ VID_HDR_OFFSET := 2048
+ BLOCKSIZE := 128k
+ IMAGES += factory.img
+ IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += glinet_gl-e750
+
+define Device/glinet_gl-s200-common
+ SOC := qca9531
+ DEVICE_VENDOR := GL.iNet
+ DEVICE_MODEL := GL-S200
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-serial-ch341
+ SUPPORTED_DEVICES += gl-s200 glinet,gl-s200
+endef
+
+define Device/glinet_gl-s200-nor
+ $(Device/glinet_gl-s200-common)
+ DEVICE_VARIANT := NOR
+ IMAGE_SIZE := 16000k
+endef
+TARGET_DEVICES += glinet_gl-s200-nor
+
+define Device/glinet_gl-s200-nor-nand
+ $(Device/glinet_gl-s200-common)
+ DEVICE_VARIANT := NOR/NAND
+ KERNEL_SIZE := 4096k
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ VID_HDR_OFFSET := 2048
+ IMAGES += factory.img
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
+ SUPPORTED_DEVICES += gl-s200 glinet,gl-s200
+endef
+TARGET_DEVICES += glinet_gl-s200-nor-nand
+
+define Device/glinet_gl-xe300
+ SOC := qca9531
+ DEVICE_VENDOR := GL.iNet
+ DEVICE_MODEL := GL-XE300
+ DEVICE_PACKAGES := kmod-usb2 block-mount kmod-usb-serial-ch341 \
+ kmod-usb-serial-option kmod-usb-net-qmi-wwan uqmi
+ KERNEL_SIZE := 4096k
+ IMAGE_SIZE := 131072k
+ PAGESIZE := 2048
+ VID_HDR_OFFSET := 2048
+ BLOCKSIZE := 128k
+ IMAGES += factory.img
+ IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += glinet_gl-xe300
+
+define Device/glinet_gl-x1200-common
+ SOC := qca9563
+ DEVICE_VENDOR := GL.iNet
+ DEVICE_MODEL := GL-X1200
+ DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct-htt kmod-usb2 \
+ kmod-usb-storage block-mount kmod-usb-net-qmi-wwan uqmi
+ IMAGE_SIZE := 16000k
+endef
+
+define Device/glinet_gl-x1200-nor-nand
+ $(Device/glinet_gl-x1200-common)
+ DEVICE_VARIANT := NOR/NAND
+ KERNEL_SIZE := 4096k
+ IMAGE_SIZE := 131072k
+ PAGESIZE := 2048
+ VID_HDR_OFFSET := 2048
+ BLOCKSIZE := 128k
+ IMAGES += factory.img
+ IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += glinet_gl-x1200-nor-nand
+
+define Device/glinet_gl-x1200-nor
+ $(Device/glinet_gl-x1200-common)
+ DEVICE_VARIANT := NOR
+endef
+TARGET_DEVICES += glinet_gl-x1200-nor
+
+define Device/linksys_ea4500-v3
+ SOC := qca9558
+ DEVICE_VENDOR := Linksys
+ DEVICE_MODEL := EA4500
+ DEVICE_VARIANT := v3
+ DEVICE_PACKAGES := kmod-usb2
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL_SIZE := 4096k
+ IMAGE_SIZE := 81920k
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ LINKSYS_HWNAME := EA4500V3
+ IMAGES += factory.img
+ IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
+ append-ubi | check-size | linksys-image type=$$$$(LINKSYS_HWNAME)
+ UBINIZE_OPTS := -E 5
+endef
+TARGET_DEVICES += linksys_ea4500-v3
+
+define Device/meraki_mr18
+ SOC := qca9557
+ DEVICE_VENDOR := Meraki
+ DEVICE_MODEL := MR18
+ DEVICE_PACKAGES := kmod-leds-uleds kmod-spi-gpio nu801
+ KERNEL_SIZE := 8m
BLOCKSIZE := 128k
PAGESIZE := 2048
- VID_HDR_OFFSET := 512
- IMAGES := factory.ubi sysupgrade.tar
- IMAGE/sysupgrade.tar := sysupgrade-tar
- IMAGE/factory.ubi := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
+ LOADER_TYPE := bin
+ KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | meraki-header MR18
+# Initramfs-build fails due to size issues
+# KERNEL_INITRAMFS := $$(KERNEL)
+ KERNEL_INITRAMFS :=
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ SUPPORTED_DEVICES += mr18
+endef
+TARGET_DEVICES += meraki_mr18
+
+# fake rootfs is mandatory, pad-offset 129 equals (2 * uimage_header + '\0')
+define Device/netgear_ath79_nand
+ DEVICE_VENDOR := NETGEAR
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport
+ KERNEL_SIZE := 4096k
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ IMAGE_SIZE := 25600k
+ KERNEL := kernel-bin | append-dtb | lzma | \
+ pad-offset $$(BLOCKSIZE) 129 | uImage lzma | pad-extra 1 | \
+ append-uImage-fakehdr filesystem $$(UIMAGE_MAGIC)
+ IMAGES := sysupgrade.bin factory.img
+ IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
+ append-ubi | check-size | netgear-dni
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ UBINIZE_OPTS := -E 5
+endef
+
+define Device/netgear_pgzng1
+ SOC := ar9344
+ DEVICE_MODEL := PGZNG1
+ DEVICE_VENDOR := NETGEAR
+ DEVICE_ALT0_MODEL := Pulse Gateway
+ DEVICE_ALT0_VENDOR := ADT
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-i2c-gpio \
+ kmod-leds-pca955x kmod-rtc-isl1208 kmod-spi-dev
+ KERNEL_SIZE := 5120k
+ IMAGE_SIZE := 83968k
+ PAGESIZE := 2048
+ BLOCKSIZE := 128k
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += netgear_pgzng1
+
+define Device/netgear_r6100
+ SOC := ar9344
+ DEVICE_MODEL := R6100
+ UIMAGE_MAGIC := 0x36303030
+ NETGEAR_BOARD_ID := R6100
+ NETGEAR_HW_ID := 29764434+0+128+128+2x2+2x2
+ $(Device/netgear_ath79_nand)
+ DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct
+endef
+TARGET_DEVICES += netgear_r6100
+
+define Device/netgear_wndr3700-v4
+ SOC := ar9344
+ DEVICE_MODEL := WNDR3700
+ DEVICE_VARIANT := v4
+ UIMAGE_MAGIC := 0x33373033
+ NETGEAR_BOARD_ID := WNDR3700v4
+ NETGEAR_HW_ID := 29763948+128+128
+ $(Device/netgear_ath79_nand)
+endef
+TARGET_DEVICES += netgear_wndr3700-v4
+
+define Device/netgear_wndr4300
+ SOC := ar9344
+ DEVICE_MODEL := WNDR4300
+ UIMAGE_MAGIC := 0x33373033
+ NETGEAR_BOARD_ID := WNDR4300
+ NETGEAR_HW_ID := 29763948+0+128+128+2x2+3x3
+ $(Device/netgear_ath79_nand)
+endef
+TARGET_DEVICES += netgear_wndr4300
+
+define Device/netgear_wndr4300sw
+ SOC := ar9344
+ DEVICE_MODEL := WNDR4300SW
+ UIMAGE_MAGIC := 0x33373033
+ NETGEAR_BOARD_ID := WNDR4300SW
+ NETGEAR_HW_ID := 29763948+0+128+128+2x2+3x3
+ $(Device/netgear_ath79_nand)
+endef
+TARGET_DEVICES += netgear_wndr4300sw
+
+define Device/netgear_wndr4300tn
+ SOC := ar9344
+ DEVICE_MODEL := WNDR4300TN
+ UIMAGE_MAGIC := 0x33373033
+ NETGEAR_BOARD_ID := WNDR4300TN
+ NETGEAR_HW_ID := 29763948+0+128+128+2x2+3x3
+ $(Device/netgear_ath79_nand)
+endef
+TARGET_DEVICES += netgear_wndr4300tn
+
+define Device/netgear_wndr4300-v2
+ SOC := qca9563
+ DEVICE_COMPAT_VERSION := 1.1
+ DEVICE_COMPAT_MESSAGE := Partition table has been changed to fix the \
+ first reboot issue. Please reflash factory image with nmrp or tftp.
+ DEVICE_MODEL := WNDR4300
+ DEVICE_VARIANT := v2
+ UIMAGE_MAGIC := 0x27051956
+ NETGEAR_BOARD_ID := WNDR4500series
+ NETGEAR_HW_ID := 29764821+2+128+128+3x3+3x3+5508012175
+ $(Device/netgear_ath79_nand)
+endef
+TARGET_DEVICES += netgear_wndr4300-v2
+
+define Device/netgear_wndr4500-v3
+ SOC := qca9563
+ DEVICE_COMPAT_VERSION := 1.1
+ DEVICE_COMPAT_MESSAGE := Partition table has been changed to fix the \
+ first reboot issue. Please reflash factory image with nmrp or tftp.
+ DEVICE_MODEL := WNDR4500
+ DEVICE_VARIANT := v3
+ UIMAGE_MAGIC := 0x27051956
+ NETGEAR_BOARD_ID := WNDR4500series
+ NETGEAR_HW_ID := 29764821+2+128+128+3x3+3x3+5508012173
+ $(Device/netgear_ath79_nand)
+endef
+TARGET_DEVICES += netgear_wndr4500-v3
+
+define Device/zte_mf28x_common
+ SOC := qca9563
+ DEVICE_VENDOR := ZTE
+ DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ KERNEL_SIZE := 4096k
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+
+define Device/zte_mf281
+ $(Device/zte_mf28x_common)
+ DEVICE_MODEL := MF281
+ KERNEL_SIZE := 6144k
+ IMAGE_SIZE := 29696k
+ IMAGES += factory.bin
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
+ check-size
+ DEVICE_PACKAGES += ath10k-firmware-qca9888-ct kmod-usb-net-rndis \
+ kmod-usb-acm comgt-ncm
+endef
+TARGET_DEVICES += zte_mf281
+
+define Device/zte_mf282
+ $(Device/zte_mf28x_common)
+ DEVICE_MODEL := MF282
+ DEVICE_PACKAGES += ath10k-firmware-qca988x-ct kmod-usb-net-qmi-wwan \
+ kmod-usb-serial-option uqmi
+endef
+TARGET_DEVICES += zte_mf282
+
+define Device/zte_mf286
+ $(Device/zte_mf28x_common)
+ DEVICE_MODEL := MF286
+ DEVICE_PACKAGES += ath10k-firmware-qca988x-ct ath10k-firmware-qca9888-ct \
+ kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
+endef
+TARGET_DEVICES += zte_mf286
+
+define Device/zte_mf286a
+ $(Device/zte_mf28x_common)
+ DEVICE_MODEL := MF286A
+ DEVICE_PACKAGES += ath10k-firmware-qca9888-ct kmod-usb-net-qmi-wwan \
+ kmod-usb-serial-option uqmi
+endef
+TARGET_DEVICES += zte_mf286a
+
+define Device/zte_mf286r
+ $(Device/zte_mf28x_common)
+ DEVICE_MODEL := MF286R
+ DEVICE_PACKAGES += ath10k-firmware-qca9888-ct kmod-usb-net-rndis kmod-usb-acm \
+ comgt-ncm
+endef
+TARGET_DEVICES += zte_mf286r
+
+define Device/zyxel_nbg6716
+ SOC := qca9558
+ DEVICE_VENDOR := ZyXEL
+ DEVICE_MODEL := NBG6716
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k-ct \
+ ath10k-firmware-qca988x-ct
+ RAS_BOARD := NBG6716
+ RAS_ROOTFS_SIZE := 29696k
+ RAS_VERSION := "OpenWrt Linux-$(LINUX_VERSION)"
+ KERNEL_SIZE := 4096k
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ LOADER_TYPE := bin
+ KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | uImage none | \
+ zyxel-buildkerneljffs | check-size 4096k
+ IMAGES := sysupgrade.tar sysupgrade-4M-Kernel.bin factory.bin
+ IMAGE/sysupgrade.tar/squashfs := append-rootfs | pad-to $$$$(BLOCKSIZE) | \
+ sysupgrade-tar rootfs=$$$$@ | append-metadata
+ IMAGE/sysupgrade-4M-Kernel.bin/squashfs := append-kernel | \
+ pad-to $$$$(KERNEL_SIZE) | append-ubi | pad-to 263192576 | gzip
+ IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
+ zyxel-factory
+ UBINIZE_OPTS := -E 5
+endef
+TARGET_DEVICES += zyxel_nbg6716
+
+define Device/zyxel_emg2926_q10a
+ $(Device/zyxel_nbg6716)
+ DEVICE_MODEL := EMG2926-Q10A
+ RAS_BOARD := AAVK-EMG2926Q10A
endef
-TARGET_DEVICES += glinet_ar300m-nand
+TARGET_DEVICES += zyxel_emg2926_q10a
projects / openwrt / openwrt.git / blobdiff