base-files: correctly split install-key function for APK

[openwrt/openwrt.git] / target / linux / ipq806x / base-files / etc / board.d / 01_leds

diff --git a/target/linux/ipq806x/base-files/etc/board.d/01_leds b/target/linux/ipq806x/base-files/etc/board.d/01_leds
index 74b94a29b4ceb10ca7672ff348a161591ac03075..4aab3c9b2c7ca93b6198f1cc63e9601e38859090 100644 (file)
--- a/target/linux/ipq806x/base-files/etc/board.d/01_leds
+++ b/target/linux/ipq806x/base-files/etc/board.d/01_leds
@@ -9,9 +9,21 @@ board_config_update
 board=$(board_name)
 
 case "$board" in
+askey,rt4230w-rev6)
+       ucidef_set_led_netdev "wan-port-link" "WAN-PORT-LINK" "qca8k-0.0:00:green:wan" "wan" "link_10 link_100 link_1000"
+       ucidef_set_led_netdev "wan-port-activity" "WAN-PORT-ACTIVITY" "qca8k-0.0:00:amber:wan" "wan" "tx rx"
+       ucidef_set_led_netdev "lan1-port-link" "LAN1-PORT-LINK" "qca8k-0.0:01:green:lan" "lan1" "link_10 link_100 link_1000"
+       ucidef_set_led_netdev "lan1-port-activity" "LAN1-PORT-ACTIVITY" "qca8k-0.0:01:amber:lan" "lan1" "tx rx"
+       ucidef_set_led_netdev "lan2-port-link" "LAN2-PORT-LINK" "qca8k-0.0:02:green:lan" "lan2" "link_10 link_100 link_1000"
+       ucidef_set_led_netdev "lan2-port-activity" "LAN2-PORT-ACTIVITY" "qca8k-0.0:02:amber:lan" "lan2" "tx rx"
+       ucidef_set_led_netdev "lan3-port-link" "LAN3-PORT-LINK" "qca8k-0.0:03:green:lan" "lan3" "link_10 link_100 link_1000"
+       ucidef_set_led_netdev "lan3-port-activity" "LAN3-PORT-ACTIVITY" "qca8k-0.0:03:amber:lan" "lan3" "tx rx"
+       ucidef_set_led_netdev "lan4-port-link" "LAN4-PORT-LINK" "qca8k-0.0:04:green:lan" "lan4" "link_10 link_100 link_1000"
+       ucidef_set_led_netdev "lan4-port-activity" "LAN4-PORT-ACTIVITY" "qca8k-0.0:04:amber:lan" "lan4" "tx rx"
+       ;;
 buffalo,wxr-2533dhp)
        ucidef_set_led_wlan "wlan" "WLAN" "white:wireless" "phy0tpt"
-       ucidef_set_led_switch "wan" "WAN" "white:internet" "switch0" "0x20"
+       ucidef_set_led_netdev "wan" "WAN" "white:internet" "wan"
        ;;
 compex,wpq864)
        ucidef_set_led_usbport "usb" "USB" "green:usb" "usb1-port1" "usb2-port1"
@@ -21,28 +33,70 @@ edgecore,ecw5410)
        ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy1tpt"
        ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy0tpt"
        ;;
+extreme,ap3935)
+       ucidef_set_led_netdev "wan" "wan" "orange:lan1" "eth1"
+       ucidef_set_led_netdev "lan" "lan" "orange:lan2" "eth0"
+       ;;
+fortinet,fap-421e)
+       ucidef_set_led_netdev "eth1-100" "ETH1-100" "amber:eth1" "eth0" "link_100"
+       ucidef_set_led_netdev "eth1-1000" "ETH1-1000" "yellow:eth1" "eth0" "link_1000"
+       ucidef_set_led_netdev "eth2-100" "ETH2-100" "amber:eth2" "eth1" "link_100"
+       ucidef_set_led_netdev "eth2-1000" "ETH2-1000" "yellow:eth2" "eth1" "link_1000"
+       ucidef_set_led_wlan "wlan2g" "2.4G" "yellow:2g" "phy1tpt"
+       ucidef_set_led_wlan "wlan5g" "5G" "yellow:5g" "phy0tpt"
+       ucidef_set_led_usbport "usb" "USB" "amber:power" "usb1-port1" "usb2-port1"
+       ;;
+meraki,mr52)
+       ucidef_set_led_netdev "eth0" "eth0" "green:lan1" "eth0"
+       ucidef_set_led_netdev "eth1" "eth1" "green:lan2" "eth1"
+       ;;
 nec,wg2600hp)
        ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy1tpt"
        ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy0tpt"
-       ucidef_set_led_switch "wan" "WAN" "green:active" "switch0" "0x2"
+       ucidef_set_led_netdev "wan" "WAN" "green:active" "wan"
        ;;
 nec,wg2600hp3)
-       ucidef_set_led_switch "wan" "WAN" "green:active" "switch0" "0x2"
+       ucidef_set_led_netdev "wan" "WAN" "green:active" "wan"
+       ucidef_set_led_netdev "wan-port-10" "WAN-PORT-10" "qca8k-0.0:00:green:wan-1" "wan" "tx rx link_10"
+       ucidef_set_led_netdev "wan-port-100" "WAN-PORT-100" "qca8k-0.0:00:green:wan-2" "wan" "tx rx link_100"
+       ucidef_set_led_netdev "wan-port-1000" "WAN-PORT-1000" "qca8k-0.0:00:green:wan-3" "wan" "tx rx link_1000"
+       ucidef_set_led_netdev "lan1-port-10" "LAN1-PORT-10" "qca8k-0.0:01:green:lan-1" "lan1" "tx rx link_10"
+       ucidef_set_led_netdev "lan1-port-100" "LAN1-PORT-100" "qca8k-0.0:01:green:lan-2" "lan1" "tx rx link_100"
+       ucidef_set_led_netdev "lan1-port-1000" "LAN1-PORT-1000" "qca8k-0.0:01:green:lan-3" "lan1" "tx rx link_1000"
+       ucidef_set_led_netdev "lan2-port-10" "LAN2-PORT-10" "qca8k-0.0:02:green:lan-1" "lan2" "tx rx link_10"
+       ucidef_set_led_netdev "lan2-port-100" "LAN2-PORT-100" "qca8k-0.0:02:green:lan-2" "lan2" "tx rx link_100"
+       ucidef_set_led_netdev "lan2-port-1000" "LAN2-PORT-1000" "qca8k-0.0:02:green:lan-3" "lan2" "tx rx link_1000"
+       ucidef_set_led_netdev "lan3-port-10" "LAN3-PORT-10" "qca8k-0.0:03:green:lan-1" "lan3" "tx rx link_10"
+       ucidef_set_led_netdev "lan3-port-100" "LAN3-PORT-100" "qca8k-0.0:03:green:lan-2" "lan3" "tx rx link_100"
+       ucidef_set_led_netdev "lan3-port-1000" "LAN3-PORT-1000" "qca8k-0.0:03:green:lan-3" "lan3" "tx rx link_1000"
+       ucidef_set_led_netdev "lan4-port-10" "LAN4-PORT-10" "qca8k-0.0:04:green:lan-1" "lan4" "tx rx link_10"
+       ucidef_set_led_netdev "lan4-port-100" "LAN4-PORT-100" "qca8k-0.0:04:green:lan-2" "lan4" "tx rx link_100"
+       ucidef_set_led_netdev "lan4-port-1000" "LAN4-PORT-1000" "qca8k-0.0:04:green:lan-3" "lan4" "tx rx link_1000"
        ;;
 netgear,d7800 |\
 netgear,r7500 |\
 netgear,r7500v2 |\
-netgear,r7800)
+netgear,r7800 |\
+netgear,xr450 |\
+netgear,xr500)
        ucidef_set_led_usbport "usb1" "USB 1" "white:usb1" "usb1-port1" "usb2-port1"
        ucidef_set_led_usbport "usb2" "USB 2" "white:usb2" "usb3-port1" "usb4-port1"
-       ucidef_set_led_switch "wan" "WAN" "white:wan" "switch0" "0x20"
+       ucidef_set_led_netdev "wan" "WAN" "white:wan" "wan"
        ucidef_set_led_ide "esata" "eSATA" "white:esata"
        ;;
+nokia,ac400i)
+       ucidef_set_led_wlan "wlan5g" "5G" "green:wlan5g" "wlan0"
+       ucidef_set_led_wlan "wlan2g" "2.4G" "green:wlan2g" "wlan1"
+       ucidef_set_led_netdev "eth1" "ETH1" "green:eth1" "eth0"
+       ucidef_set_led_netdev "eth2" "ETH2" "green:eth2" "eth1"
+       ucidef_set_led_default "ctrl" "CTRL" "green:ctrl" "0"
+       ucidef_set_led_default "pwr" "PWR" "green:power" "1"
+       ;;
 tplink,ad7200)
        ucidef_set_led_usbport "usb1" "USB 1" "blue:usb1" "usb1-port1" "usb2-port1"
        ucidef_set_led_usbport "usb2" "USB 2" "blue:usb3" "usb3-port1" "usb4-port1"
-       ucidef_set_led_switch "wan" "wan" "blue:wan" "switch0" "0x02"
-       ucidef_set_led_switch "lan" "lan" "blue:lan" "switch0" "0x3c"
+       ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan"
+       ucidef_set_led_netdev "lan" "lan" "blue:lan" "br-lan"
        ucidef_set_led_wlan "wlan2g" "wlan2g" "blue:wlan2g" "phy2tpt"
        ucidef_set_led_wlan "wlan5g" "wlan5g" "blue:wlan5g" "phy1tpt"
        ucidef_set_led_netdev "wlan60g" "wlan60g" "blue:wlan60g" "wlan0"
@@ -50,18 +104,18 @@ tplink,ad7200)
 tplink,c2600)
        ucidef_set_led_usbport "usb1" "USB 1" "white:usb_2" "usb1-port1" "usb2-port1"
        ucidef_set_led_usbport "usb2" "USB 2" "white:usb_4" "usb3-port1" "usb4-port1"
-       ucidef_set_led_switch "wan" "wan" "white:wan" "switch0" "0x20"
-       ucidef_set_led_switch "lan" "lan" "white:lan" "switch0" "0x1e"
+       ucidef_set_led_netdev "wan" "wan" "white:wan" "wan"
+       ucidef_set_led_netdev "lan" "lan" "white:lan" "br-lan"
        ;;
 tplink,vr2600v)
        ucidef_set_led_usbport "usb" "USB" "white:usb" "usb1-port1" "usb2-port1" "usb3-port1" "usb4-port1"
-       ucidef_set_led_switch "lan" "lan" "white:lan" "switch0" "0x1e"
+       ucidef_set_led_netdev "lan" "lan" "white:lan" "br-lan"
        ucidef_set_led_wlan "wlan2g" "WLAN2G" "white:wlan2g" "phy0tpt"
        ucidef_set_led_wlan "wlan5g" "WLAN5G" "white:wlan5g" "phy1tpt"
-       ucidef_set_led_switch "wan" "wan" "white:wan" "switch0" "0x20"
+       ucidef_set_led_netdev "wan" "WAN" "white:wan" "wan"
        ;;
 zyxel,nbg6817)
-       ucidef_set_led_netdev "wan" "WAN" "white:internet" "eth1"
+       ucidef_set_led_netdev "wan" "WAN" "white:internet" "wan"
        ;;
 esac