ipq40xx: fritzrepeater-1200: fix MDIO and PHY probing

[openwrt/openwrt.git] / target / linux / mvebu / base-files / lib / upgrade / linksys.sh

diff --git a/target/linux/mvebu/base-files/lib/upgrade/linksys.sh b/target/linux/mvebu/base-files/lib/upgrade/linksys.sh
deleted file mode 100644 (file)
index ca64a0e..0000000
--- a/target/linux/mvebu/base-files/lib/upgrade/linksys.sh
+++ /dev/null
@@ -1,98 +0,0 @@
-#
-# Copyright (C) 2014-2015 OpenWrt.org
-#
-
-linksys_get_target_firmware() {
-
-       local cur_boot_part mtd_ubi0
-
-       cur_boot_part=`/usr/sbin/fw_printenv -n boot_part`
-       if [ -z "${cur_boot_part}" ] ; then
-               mtd_ubi0=$(cat /sys/devices/virtual/ubi/ubi0/mtd_num)
-               case $(egrep ^mtd${mtd_ubi0}: /proc/mtd | cut -d '"' -f 2) in
-               kernel1|rootfs1)
-                       cur_boot_part=1
-                       ;;
-               kernel2|rootfs2)
-                       cur_boot_part=2
-                       ;;
-               esac
-               >&2 printf "Current boot_part='%s' selected from ubi0/mtd_num='%s'" \
-                       "${cur_boot_part}" "${mtd_ubi0}"
-       fi
-
-       case $cur_boot_part in
-       1)
-               fw_setenv -s - <<-EOF
-                       boot_part 2
-                       bootcmd "run altnandboot"
-               EOF
-               printf "kernel2"
-               return
-               ;;
-       2)
-               fw_setenv -s - <<-EOF
-                       boot_part 1
-                       bootcmd "run nandboot"
-               EOF
-               printf "kernel1"
-               return
-               ;;
-       *)
-               return
-               ;;
-       esac
-}
-
-linksys_get_root_magic() {
-       (get_image "$@" | dd skip=786432 bs=4 count=1 | hexdump -v -n 4 -e '1/1 "%02x"') 2>/dev/null
-}
-
-platform_do_upgrade_linksys() {
-       local magic_long="$(get_magic_long "$1")"
-
-       mkdir -p /var/lock
-       local part_label="$(linksys_get_target_firmware)"
-       touch /var/lock/fw_printenv.lock
-
-       if [ ! -n "$part_label" ]
-       then
-               echo "cannot find target partition"
-               exit 1
-       fi
-
-       local target_mtd=$(find_mtd_part $part_label)
-
-       [ "$magic_long" = "73797375" ] && {
-               CI_KERNPART="$part_label"
-               if [ "$part_label" = "kernel1" ]
-               then
-                       CI_UBIPART="rootfs1"
-               else
-                       CI_UBIPART="rootfs2"
-               fi
-
-               nand_upgrade_tar "$1"
-       }
-       [ "$magic_long" = "27051956" -o "$magic_long" = "0000a0e1" ] && {
-               # check firmwares' rootfs types
-               local target_mtd=$(find_mtd_part $part_label)
-               local oldroot="$(linksys_get_root_magic $target_mtd)"
-               local newroot="$(linksys_get_root_magic "$1")"
-
-               if [ "$newroot" = "55424923" -a "$oldroot" = "55424923" ]
-               # we're upgrading from a firmware with UBI to one with UBI
-               then
-                       # erase everything to be safe
-                       mtd erase $part_label
-                       get_image "$1" | mtd -n write - $part_label
-               else
-                       get_image "$1" | mtd write - $part_label
-               fi
-       }
-}
-
-platform_copy_config_linksys() {
-       cp -f "$UPGRADE_BACKUP" "/tmp/syscfg/$BACKUP_FILE"
-       sync
-}