+# SPDX-License-Identifier: GPL-2.0-only
#
# Copyright (C) 2012-2016 OpenWrt.org
# Copyright (C) 2016 LEDE-project.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
JFFS2_BLOCKSIZE = 128k
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
+DEVICE_VARS += BOOT_SCRIPT UBOOT
KERNEL_LOADADDR := 0x00008000
-define Build/dtb
- $(call Image/BuildDTB,$(DTS_DIR)/$(DEVICE_DTS).dts,$@.dtb)
-endef
-
-# SD-Card Images:
-# these values are optimized for a 4GB labeled sdcard that actually holds 7744512 sectors of 512 byte
-# MBR: 2048 sectors
-# Partition 1: 32768 sectors
-# Partition 2: 98304 sectors (configurable)
-
-define Build/boot-scr-cfpro
- rm -f $@.bootscript
- mkimage -A arm -O linux -T script -C none -a 0 -e 0 -d cfpro-boot.script $@.bootscript
-endef
-
-define Build/boot-scr-cfbase
- rm -f $@.bootscript
- mkimage -A arm -O linux -T script -C none -a 0 -e 0 -d cfbase-boot.script $@.bootscript
+define Build/boot-scr
+ rm -f $@-boot.scr
+ sed \
+ -e 's#@ROOT@#$(IMG_PART_SIGNATURE)#g' \
+ -e 's#@DTB@#$(firstword $(DEVICE_DTS))#g' \
+ $(BOOT_SCRIPT).bootscript > $@-new.bootscript
+ mkimage -A arm -O linux -T script -C none -a 0 -e 0 -d $@-new.bootscript $@-boot.scr
endef
define Build/boot-img
rm -f $@.boot
- mkfs.fat -C $@.boot 16384
- $(foreach dts,$(DEVICE_DTS), mcopy -i $@.boot $(DTS_DIR)/$(dts).dtb ::$(dts).dtb;)
- mcopy -i $@.boot $(IMAGE_KERNEL) ::zImage
- mcopy -i $@.boot $@.bootscript ::boot.scr
+ mkfs.fat -C $@.boot $$(( $(CONFIG_TARGET_KERNEL_PARTSIZE) * 1024 ))
+ $(foreach dts,$(DEVICE_DTS), mcopy -i $@.boot $(KDIR)/image-$(dts).dtb ::$(dts).dtb;)
+ mcopy -i $@.boot $(IMAGE_KERNEL) ::$(KERNEL_NAME)
+ -mcopy -i $@.boot $@-boot.scr ::boot.scr
+endef
+
+define Build/boot-img-ext4
+ rm -fR $@.boot
+ mkdir -p $@.boot
+ $(foreach dts,$(DEVICE_DTS), $(CP) $(KDIR)/image-$(dts).dtb $@.boot/$(dts).dtb;)
+ $(CP) $(IMAGE_KERNEL) $@.boot/$(KERNEL_NAME)
+ -$(CP) $@-boot.scr $@.boot/boot.scr
+ make_ext4fs -J -L kernel -l $(CONFIG_TARGET_KERNEL_PARTSIZE)M \
+ $(if $(SOURCE_DATE_EPOCH),-T $(SOURCE_DATE_EPOCH)) \
+ $@.bootimg $@.boot
+endef
+
+define Build/buffalo-kernel-jffs2
+ rm -rf $(KDIR)/kernel_jffs2 $@.fakerd
+ mkdir -p $(KDIR)/kernel_jffs2
+ dd if=/dev/zero of=$@.fakerd bs=131008 count=1 conv=sync
+ $(STAGING_DIR_HOST)/bin/mkimage \
+ -T ramdisk -A $(LINUX_KARCH) -O linux -C gzip -n 'fake initrd' \
+ -d $@.fakerd $(KDIR)/kernel_jffs2/initrd.buffalo
+ cp $@ $(KDIR)/kernel_jffs2/uImage.buffalo
+ $(STAGING_DIR_HOST)/bin/mkfs.jffs2 \
+ --little-endian -v --squash-uids -q -f -n -x lzma -x rtime -m none \
+ --eraseblock=128KiB --pad=$(KERNEL_SIZE) -d $(KDIR)/kernel_jffs2 -o $@
+ rm -rf $(KDIR)/kernel_jffs2 $@.fakerd
+endef
+
+define Build/buffalo-kernel-ubifs
+ rm -rf $@-ubidir
+ mkdir -p $@-ubidir
+ mv $@ $@-ubidir/uImage.buffalo
+ touch $@
+ $(call Build/append-uImage-fakehdr, ramdisk)
+ mv $@ $@-ubidir/initrd.buffalo
+ $(STAGING_DIR_HOST)/bin/mkfs.ubifs $(KERNEL_UBIFS_OPTS) -r $@-ubidir $@
+endef
+
+# Some info about Ctera firmware:
+# 1. It's simple tar file (GNU standard), but it must have ".firm" suffix.
+# 2. It contains two images: kernel and romdisk. Both are required.
+# 3. Every image has header and trailer file.
+# 4. The struct of tar firmware is: header kernel trailer header romdisk trailer
+# 5. In header file are some strings used to describe image. It was decoded from
+# factory image.
+# 6. Version format in header file is restricted by Original FW.
+# 7. Trailer file contains MD5 sum string of header and image file.
+# 8. Firmware file must have <=24MB size.
+
+define Build/ctera-firmware
+ mkdir -p $@.tmp
+
+ # Prepare header and trailer file for kernel
+ echo "# CTera firmware information file" > $@.tmp/header
+ echo "image_type=kernel" >> $@.tmp/header
+ echo "arch=ARM" >> $@.tmp/header
+ echo "board=2Drive_A" >> $@.tmp/header
+ echo "version=5.5.165.61499" >> $@.tmp/header
+ echo "kernel_cmd=console=ttyS0,115200 earlycon" >> $@.tmp/header
+ echo "date=$$(date $(if $(SOURCE_DATE_EPOCH),-d@$(SOURCE_DATE_EPOCH)))" \
+ >> $@.tmp/header
+
+ cp $@ $@.tmp/kernel
+
+ echo "MD5=$$(cat $@.tmp/header $@.tmp/kernel | $(MKHASH) md5)" \
+ > $@.tmp/trailer
+
+ tar $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
+ -H gnu -C $@.tmp -cf $@.tar header kernel trailer
+
+ # Prepare header and trailer file for fake romdisk
+ echo "# CTera firmware information file" > $@.tmp/header
+ echo "image_type=romdisk" >> $@.tmp/header
+ echo "initrd=yes" >> $@.tmp/header
+ echo "arch=ARM" >> $@.tmp/header
+ echo "board=2Drive_A" >> $@.tmp/header
+ echo "version=5.5.165.61499" >> $@.tmp/header
+ echo "date=$$(date $(if $(SOURCE_DATE_EPOCH),-d@$(SOURCE_DATE_EPOCH)))" \
+ >> $@.tmp/header
+
+ rm -f $@
+ touch $@
+ $(call Build/append-uImage-fakehdr, ramdisk)
+ cp $@ $@.tmp/romdisk
+
+ echo "MD5=$$(cat $@.tmp/header $@.tmp/romdisk | $(MKHASH) md5)" \
+ > $@.tmp/trailer
+
+ tar $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
+ -H gnu -C $@.tmp -rf $@.tar header romdisk trailer
+
+ mv $@.tar $@
+ rm -rf $@.tmp
endef
define Build/sdcard-img
- ROOTFS_SIZE=$$(( $(CONFIG_TARGET_ROOTFS_PARTSIZE) * 1024 * 2 )); \
+ SIGNATURE="$(IMG_PART_SIGNATURE)" \
+ ./gen_mvebu_sdcard_img.sh $@ \
+ $(if $(UBOOT),$(STAGING_DIR_IMAGE)/$(UBOOT)) \
+ c $(CONFIG_TARGET_KERNEL_PARTSIZE) $@.boot \
+ 83 $(CONFIG_TARGET_ROOTFS_PARTSIZE) $(IMAGE_ROOTFS)
+endef
+
+define Build/sdcard-img-ext4
+ SIGNATURE="$(IMG_PART_SIGNATURE)" \
./gen_mvebu_sdcard_img.sh $@ \
- "$(STAGING_DIR_IMAGE)/clearfog-u-boot-spl.kwb" \
- c 32768 $@.boot \
- 83 $$ROOTFS_SIZE $(IMAGE_ROOTFS)
+ $(if $(UBOOT),$(STAGING_DIR_IMAGE)/$(UBOOT)) \
+ 83 $(CONFIG_TARGET_KERNEL_PARTSIZE) $@.bootimg \
+ 83 $(CONFIG_TARGET_ROOTFS_PARTSIZE) $(IMAGE_ROOTFS)
+endef
+
+define Build/uDPU-firmware
+ (rm -fR $@-fw; mkdir -p $@-fw)
+ $(CP) $(BIN_DIR)/$(DEVICE_IMG_PREFIX)-initramfs.itb $@-fw/recovery.itb
+ $(CP) $@-boot.scr $@-fw/boot.scr
+ $(TAR) -cvzp --numeric-owner --owner=0 --group=0 --sort=name \
+ $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
+ -f $@-fw/rootfs.tgz -C $(TARGET_DIR) .
+ $(TAR) -cvzp --numeric-owner --owner=0 --group=0 --sort=name \
+ $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
+ -f $@-fw/boot.tgz -C $@.boot .
+ $(TAR) -cvzp --numeric-owner --owner=0 --group=0 --sort=name \
+ $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
+ -f $(KDIR_TMP)/$(DEVICE_IMG_PREFIX)-firmware.tgz -C $@-fw .
endef
define Device/Default
PROFILES := Default
- DEVICE_DTS := $(1)
+ DEVICE_DTS = $$(SOC)-$(lastword $(subst _, ,$(1)))
+ DEVICE_DTS_DIR := $(DTS_DIR)
BOARD_NAME = $$(DEVICE_DTS)
KERNEL_NAME := zImage
KERNEL := kernel-bin | append-dtb | uImage none
- SUPPORTED_DEVICES = $$(DEVICE_DTS)
-endef
-
-define Device/UBI
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ UBINIZE_OPTS := -E 5
+ UBOOT :=
+ BOOT_SCRIPT :=
endef
-define Device/UBI-factory
- $(Device/UBI)
- UBINIZE_OPTS := -E 5
- IMAGES += factory.img
- IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | pad-to $$$$(PAGESIZE)
+define Device/Default-arm64
+ BOOT_SCRIPT := generic-arm64
+ DEVICE_DTS_DIR := $(DTS_DIR)/marvell
+ IMAGES := sdcard.img.gz
+ IMAGE/sdcard.img.gz := boot-scr | boot-img-ext4 | sdcard-img-ext4 | gzip | append-metadata
+ KERNEL_NAME := Image
+ KERNEL := kernel-bin
endef
define Device/NAND-128K
- $(Device/UBI)
BLOCKSIZE := 128k
PAGESIZE := 2048
SUBPAGESIZE := 512
endef
define Device/NAND-256K
- $(Device/UBI)
BLOCKSIZE := 256k
PAGESIZE := 4096
endef
define Device/NAND-512K
- $(Device/UBI)
BLOCKSIZE := 512k
PAGESIZE := 4096
endef
-define Device/linksys
- DEVICE_TITLE := Linksys $(1)
- DEVICE_PACKAGES := kmod-mwlwifi wpad-mini swconfig
-endef
-
-define Device/armada-385-linksys
- $(Device/NAND-128K)
- $(Device/UBI-factory)
- KERNEL_SIZE := 6144k
-endef
-
-define Device/linksys-wrt1200ac
- $(call Device/linksys,WRT1200AC (Caiman))
- $(Device/armada-385-linksys)
- DEVICE_DTS := armada-385-linksys-caiman
-endef
-TARGET_DEVICES += linksys-wrt1200ac
-
-define Device/linksys-wrt1900acv2
- $(call Device/linksys,WRT1900ACv2 (Cobra))
- $(Device/armada-385-linksys)
- DEVICE_DTS := armada-385-linksys-cobra
-endef
-TARGET_DEVICES += linksys-wrt1900acv2
-
-define Device/linksys-wrt3200acm
- $(call Device/linksys,WRT3200ACM (Rango))
- $(Device/armada-385-linksys)
- DEVICE_DTS := armada-385-linksys-rango
- DEVICE_PACKAGES += kmod-btmrvl kmod-mwifiex-sdio
-endef
-TARGET_DEVICES += linksys-wrt3200acm
-
-define Device/linksys-wrt1900acs
- $(call Device/linksys,WRT1900ACS (Shelby))
- $(Device/armada-385-linksys)
- DEVICE_DTS := armada-385-linksys-shelby
-endef
-TARGET_DEVICES += linksys-wrt1900acs
-
-define Device/linksys-wrt1900ac
- $(call Device/linksys,WRT1900AC (Mamba))
- DEVICE_DTS := armada-xp-linksys-mamba
- $(Device/NAND-128K)
- $(Device/UBI-factory)
- KERNEL_SIZE := 3072k
-endef
-TARGET_DEVICES += linksys-wrt1900ac
-
-define Device/openblocks-ax3-4
- $(Device/UBI-factory)
- DEVICE_DTS := armada-xp-openblocks-ax3-4
- SUPPORTED_DEVICES := $(1)
- BLOCKSIZE := 128k
- PAGESIZE := 1
- IMAGE/factory.img := append-kernel | pad-to $$(BLOCKSIZE) | append-ubi
- DEVICE_TITLE := Plat'Home OpenBlocks AX3
-endef
-TARGET_DEVICES += openblocks-ax3-4
-
-define Device/armada-385-db-ap
- $(Device/NAND-256K)
- $(Device/UBI-factory)
- KERNEL_SIZE := 8192k
- DEVICE_TITLE := Marvell Armada 385 DB AP (DB-88F6820-AP)
-endef
-TARGET_DEVICES += armada-385-db-ap
-
-define Device/marvell-nand
- $(Device/NAND-512K)
- DEVICE_TITLE := Marvell Armada $(1)
-endef
-
-Device/armada-370-db = $(call Device/marvell-nand,370 DB (DB-88F6710-BP-DDR3))
-Device/armada-370-rd = $(call Device/marvell-nand,370 RD (RD-88F6710-A1))
-Device/armada-xp-db = $(call Device/marvell-nand,XP DB (DB-78460-BP))
-Device/armada-xp-gp = $(call Device/marvell-nand,XP GP (DB-MV784MP-GP))
-TARGET_DEVICES += armada-370-db armada-370-rd armada-xp-db armada-xp-gp
-
-define Device/armada-388-rd
- DEVICE_TITLE := Marvell Armada 388 RD (RD-88F6820-AP)
- IMAGES := firmware.bin
- IMAGE/firmware.bin := append-kernel | pad-to 256k | append-rootfs | pad-rootfs
-endef
-TARGET_DEVICES += armada-388-rd
-
-define Device/armada-388-clearfog-pro
- KERNEL_INSTALL := 1
- KERNEL := kernel-bin
- DEVICE_TITLE := SolidRun ClearFog Pro
- DEVICE_PACKAGES := mkf2fs e2fsprogs swconfig kmod-fs-vfat kmod-nls-cp437 kmod-nls-iso8859-1
- IMAGES := sdcard.img.gz
- IMAGE/sdcard.img.gz := boot-scr-cfpro | boot-img | sdcard-img | gzip | append-metadata
- IMAGE_NAME = $$(IMAGE_PREFIX)-$$(2)
- DEVICE_DTS := armada-388-clearfog-pro armada-388-clearfog-base
-endef
-TARGET_DEVICES += armada-388-clearfog-pro
-
-define Device/armada-388-clearfog-base
- KERNEL_INSTALL := 1
- KERNEL := kernel-bin
- DEVICE_TITLE := SolidRun ClearFog Base
- DEVICE_PACKAGES := \
- kmod-nls-cp437 kmod-nls-iso8859-1 \
- mkf2fs e2fsprogs kmod-fs-vfat kmod-fuse kmod-fs-f2fs \
- kmod-ata-core kmod-ata-ahci kmod-ata-marvell-sata kmod-scsi-core kmod-scsi-generic \
- kmod-button-hotplug kmod-gpio-button-hotplug
- IMAGES := sdcard.img.gz
- IMAGE/sdcard.img.gz := boot-scr-cfbase | boot-img | sdcard-img | gzip
- IMAGE_NAME = $$(IMAGE_PREFIX)-$$(2)
- DEVICE_DTS := armada-388-clearfog-pro armada-388-clearfog-base
-endef
-TARGET_DEVICES += armada-388-clearfog-base
-
-define Device/globalscale-mirabox
- $(Device/NAND-512K)
- DEVICE_DTS := armada-370-mirabox
- SUPPORTED_DEVICES := mirabox
- DEVICE_TITLE := Globalscale Mirabox
-endef
-TARGET_DEVICES += globalscale-mirabox
+include $(SUBTARGET).mk
$(eval $(call BuildImage))
projects / openwrt / openwrt.git / blobdiff