generic: v6.1, v6.6: add patch to fix PHY-muxing on MT7530

[openwrt/openwrt.git] / target / linux / ramips / dts / mt7621_ubiquiti_edgerouterx.dtsi

diff --git a/target/linux/ramips/dts/mt7621_ubiquiti_edgerouterx.dtsi b/target/linux/ramips/dts/mt7621_ubiquiti_edgerouterx.dtsi
deleted file mode 100644 (file)
index 6fed4a0..0000000
--- a/target/linux/ramips/dts/mt7621_ubiquiti_edgerouterx.dtsi
+++ /dev/null
@@ -1,140 +0,0 @@
-#include "mt7621.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-       aliases {
-               label-mac-device = &gmac0;
-       };
-
-       chosen {
-               bootargs = "console=ttyS0,57600";
-       };
-
-       keys {
-               compatible = "gpio-keys";
-
-               reset {
-                       label = "reset";
-                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-       };
-};
-
-&gmac0 {
-       mtd-mac-address = <&factory 0x22>;
-};
-
-&switch0 {
-       ports {
-               port@0 {
-                       status = "okay";
-                       label = "wan";
-                       mtd-mac-address = <&factory 0x22>;
-                       mtd-mac-address-increment = <1>;
-               };
-
-               port@1 {
-                       status = "okay";
-                       label = "lan1";
-               };
-
-               port@2 {
-                       status = "okay";
-                       label = "lan2";
-               };
-
-               port@3 {
-                       status = "okay";
-                       label = "lan3";
-               };
-
-               port@4 {
-                       status = "okay";
-                       label = "lan4";
-               };
-       };
-};
-
-&nand {
-       status = "okay";
-
-       partitions {
-               compatible = "fixed-partitions";
-               #address-cells = <1>;
-               #size-cells = <1>;
-
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x80000>;
-                       read-only;
-               };
-
-               partition@80000 {
-                       label = "u-boot-env";
-                       reg = <0x80000 0x60000>;
-                       read-only;
-               };
-
-               factory: partition@e0000 {
-                       label = "factory";
-                       reg = <0xe0000 0x60000>;
-               };
-
-               partition@140000 {
-                       label = "kernel1";
-                       reg = <0x140000 0x300000>;
-               };
-
-               partition@440000 {
-                       label = "kernel2";
-                       reg = <0x440000 0x300000>;
-               };
-
-               partition@740000 {
-                       label = "ubi";
-                       reg = <0x740000 0xf7c0000>;
-               };
-       };
-};
-
-&state_default {
-       gpio {
-               groups = "uart2", "uart3", "i2c", "pcie", "rgmii2", "jtag";
-               function = "gpio";
-       };
-};
-
-&spi0 {
-       /*
-        * This board has 2Mb spi flash soldered in and visible
-        * from manufacturer's firmware.
-        * But this SoC shares spi and nand pins,
-        * and current driver doesn't handle this sharing well
-        */
-       status = "disabled";
-
-       m25p80@1 {
-               compatible = "jedec,spi-nor";
-               reg = <1>;
-               spi-max-frequency = <10000000>;
-
-               partitions {
-                       compatible = "fixed-partitions";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       partition@0 {
-                               label = "spi";
-                               reg = <0x0 0x200000>;
-                               read-only;
-                       };
-               };
-       };
-};
-
-&xhci {
-       status = "disabled";
-};