+# SPDX-License-Identifier: GPL-2.0-only
#
# Copyright (C) 2008-2011 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
+
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
-DEVICE_VARS += DTS IMAGE_SIZE NETGEAR_BOARD_ID NETGEAR_HW_ID
+DEVICE_VARS += LOADER_TYPE LOADER_FLASH_OFFS LZMA_TEXT_START
+DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
+DEVICE_VARS += NETGEAR_ENC_MODEL NETGEAR_ENC_REGION NETGEAR_ENC_HW_ID_LIST NETGEAR_ENC_MODEL_LIST
DEVICE_VARS += BUFFALO_TAG_PLATFORM BUFFALO_TAG_VERSION BUFFALO_TAG_MINOR
DEVICE_VARS += SEAMA_SIGNATURE SEAMA_MTDBLOCK
-DEVICE_VARS += SERCOMM_HWID SERCOMM_HWVER SERCOMM_SWVER
-DEVICE_VARS += JCG_MAXSIZE
+DEVICE_VARS += SERCOMM_HWNAME SERCOMM_HWID SERCOMM_HWVER SERCOMM_SWVER
+DEVICE_VARS += SERCOMM_PAD JCG_MAXSIZE
loadaddr-y := 0x80000000
loadaddr-$(CONFIG_TARGET_ramips_rt288x) := 0x88000000
loadaddr-$(CONFIG_TARGET_ramips_mt7621) := 0x80001000
-KERNEL_LOADADDR := $(loadaddr-y)
+ldrplatform-y := ralink
+ldrplatform-$(CONFIG_TARGET_ramips_mt7621) := mt7621
-KERNEL_DTB = kernel-bin | append-dtb | lzma
-define Device/Default
- PROFILES = Default
- KERNEL := $(KERNEL_DTB) | uImage lzma
- MTK_SOC :=
- DEVICE_DTS_DIR := ../dts
- DEVICE_DTS = $$(MTK_SOC)_$(1)
- IMAGES := sysupgrade.bin
- SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
- sysupgrade_bin := append-kernel | append-rootfs | pad-rootfs
- IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
-endef
+ldrflashstart-y := 0x1c000000
+ldrflashstart-$(CONFIG_TARGET_ramips_mt7621) := 0x1fc00000
-define Device/seama
- SEAMA_MTDBLOCK := 2
- IMAGES += factory.bin
+LOADADDR := $(loadaddr-y)
+LOADER_PLATFORM := $(ldrplatform-y)
+LOADER_FLASH_START := $(ldrflashstart-y)
- # 64 bytes offset:
- # - 28 bytes seama_header
- # - 36 bytes of META data (4-bytes aligned)
- IMAGE/default := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-rootfs
- IMAGE/sysupgrade.bin := \
- $$(IMAGE/default) | seama | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
- IMAGE/factory.bin := \
- $$(IMAGE/default) | pad-rootfs -x 64 | seama | seama-seal | check-size $$$$(IMAGE_SIZE)
- SEAMA_SIGNATURE :=
-endef
+KERNEL_DTB = kernel-bin | append-dtb | lzma
define Build/jcg-header
- $(STAGING_DIR_HOST)/bin/jcgimage -v $(1) $(if $(JCG_MAXSIZE), -m $(JCG_MAXSIZE),) -u $@ -o $@.new
+ $(STAGING_DIR_HOST)/bin/jcgimage -v $(1) \
+ $(if $(JCG_MAXSIZE), -m $$(($(call exp_units,$(JCG_MAXSIZE)))),) \
+ -u $@ -o $@.new
mv $@.new $@
endef
-define Build/trx
- $(STAGING_DIR_HOST)/bin/trx $(1) \
- -o $@ \
- -m $$(($(subst k, * 1024,$(IMAGE_SIZE)))) \
- -f $(IMAGE_KERNEL) \
- -a 4 -f $(IMAGE_ROOTFS)
-endef
-
define Build/loader-common
rm -rf $@.src
$(MAKE) -C lzma-loader \
PKG_BUILD_DIR="$@.src" \
TARGET_DIR="$(dir $@)" LOADER_NAME="$(notdir $@)" \
- BOARD="$(BOARDNAME)" PLATFORM="$(PLATFORM)" \
- LZMA_TEXT_START=0x82000000 LOADADDR=$(KERNEL_LOADADDR) \
+ BOARD="$(BOARDNAME)" PLATFORM="$(LOADER_PLATFORM)" \
+ LZMA_TEXT_START=$(LZMA_TEXT_START) \
+ LOADADDR=$(LOADADDR) \
+ SUBTARGET=$(SUBTARGET) \
$(1) compile loader.$(LOADER_TYPE)
mv "$@.$(LOADER_TYPE)" "$@"
rm -rf $@.src
$(call Build/loader-common,LOADER_DATA="$@")
endef
-define Build/relocate-kernel
- rm -rf $@.relocate
- $(CP) ../../generic/image/relocate $@.relocate
- $(MAKE) -C $@.relocate KERNEL_ADDR=$(KERNEL_LOADADDR) CROSS_COMPILE=$(TARGET_CROSS)
- ( \
- dd if=$@.relocate/loader.bin bs=32 conv=sync && \
- perl -e '@s = stat("$@"); print pack("V", @s[7])' && \
- cat $@ \
- ) > $@.new
- mv $@.new $@
- rm -rf $@.relocate
-endef
-
-define Build/elx-header
- $(eval hw_id=$(word 1,$(1)))
- $(eval xor_pattern=$(word 2,$(1)))
- ( \
- echo -ne "\x00\x00\x00\x00\x00\x00\x00\x03" | \
- dd bs=42 count=1 conv=sync; \
- hw_id="$(hw_id)"; \
- echo -ne "\x$${hw_id:0:2}\x$${hw_id:2:2}\x$${hw_id:4:2}\x$${hw_id:6:2}" | \
- dd bs=20 count=1 conv=sync; \
- echo -ne "$$(printf '%08x' $$(stat -c%s $@) | fold -s2 | xargs -I {} echo \\x{} | tr -d '\n')" | \
- dd bs=8 count=1 conv=sync; \
- echo -ne "$$($(STAGING_DIR_HOST)/bin/mkhash md5 $@ | fold -s2 | xargs -I {} echo \\x{} | tr -d '\n')" | \
- dd bs=58 count=1 conv=sync; \
- ) > $(KDIR)/tmp/$(DEVICE_NAME).header
- $(call Build/xor-image,-p $(xor_pattern) -x)
- cat $(KDIR)/tmp/$(DEVICE_NAME).header $@ > $@.new
- mv $@.new $@
- rm -rf $(KDIR)/tmp/$(DEVICE_NAME).header
-endef
-
-define Build/umedia-header
- fix-u-media-header -T 0x46 -B $(1) -i $@ -o $@.new && mv $@.new $@
-endef
-
-define Build/edimax-header
- $(STAGING_DIR_HOST)/bin/mkedimaximg -i $@ -o $@.new $(1)
- @mv $@.new $@
-endef
-
-define Build/poray-header
- $(STAGING_DIR_HOST)/bin/mkporayfw $(1) -f $@ -o $@.new
- mv $@.new $@
+define Build/loader-okli-compile
+ $(call Build/loader-common, \
+ FLASH_START=$(LOADER_FLASH_START) \
+ FLASH_OFFS=$(LOADER_FLASH_OFFS) \
+ FLASH_MAX=0 \
+ )
endef
-define Build/wrg-header
- mkwrgimg -i $@ -d "/dev/mtdblock/2" -s $(1) -o $@.new
- mv $@.new $@
+define Build/append-loader-okli
+ cat "$(KDIR)/loader-$(word 1,$(1)).$(LOADER_TYPE)" >> "$@"
endef
# combine kernel and rootfs into one image
# mkdlinkfw <type> <optional extra arguments to mkdlinkfw binary>
-
define Build/mkdlinkfw
-$(STAGING_DIR_HOST)/bin/mkdlinkfw \
-k $(IMAGE_KERNEL) \
mv $@.new $@
endef
-define Build/zyimage
- $(STAGING_DIR_HOST)/bin/zyimage $(1) $@
+define Build/mkdlinkfw-loader
+ -$(STAGING_DIR_HOST)/bin/mkdlinkfw \
+ -k $(KDIR)/loader-$(DEVICE_NAME).bin \
+ -r $@ \
+ -o $@.new \
+ $(if $(DLINK_IMAGE_OFFSET), -O $(DLINK_IMAGE_OFFSET)) \
+ -s $(DLINK_FIRMWARE_SIZE)
+ mv $@.new $@
+endef
+
+define Build/netis-tail
+ echo -n $(1) >> $@
+ echo -n $(UIMAGE_NAME)-yun | $(MKHASH) md5 | \
+ sed 's/../\\\\x&/g' | xargs echo -ne >> $@
+endef
+
+define Build/poray-header
+ $(STAGING_DIR_HOST)/bin/mkporayfw $(1) -f $@ -o $@.new
+ mv $@.new $@
+endef
+
+define Build/relocate-kernel
+ rm -rf $@.relocate
+ $(CP) ../../generic/image/relocate $@.relocate
+ $(MAKE) -C $@.relocate KERNEL_ADDR=$(if $(1),$(1),$(KERNEL_LOADADDR)) CROSS_COMPILE=$(TARGET_CROSS)
+ ( \
+ dd if=$@.relocate/loader.bin bs=32 conv=sync && \
+ perl -e '@s = stat("$@"); print pack("V", @s[7])' && \
+ cat $@ \
+ ) > $@.new
+ mv $@.new $@
+ rm -rf $@.relocate
+endef
+
+define Build/sercom-footer
+ $(call Build/sercom-seal,-f)
endef
define Build/sercom-seal
$(1)
endef
-define Build/sercom-footer
- $(call Build/sercom-seal,-f)
+define Build/sign-dlink-ru
+ sign_dlink_ru $@ $1 $2
+ mv $@.new $@
+endef
+
+define Build/trx
+ $(STAGING_DIR_HOST)/bin/trx $(1) \
+ -o $@ \
+ -m $$(($(call exp_units,$(IMAGE_SIZE)))) \
+ -f $(IMAGE_KERNEL) \
+ -a 4 -f $(IMAGE_ROOTFS)
+endef
+
+define Build/uimage-padhdr
+ uimage_padhdr $(if $(1),-l $(1)) -i $@ -o $@.new
+ mv $@.new $@
+endef
+
+define Build/uimage-sgehdr
+ uimage_sgehdr -i $@ -o $@.new -m $(DEVICE_MODEL) \
+ -h $(DEVICE_VARIANT) -s V1.00000
+ mv $@.new $@
endef
-define Build/fonfxcimage
- uimage_padhdr -i $@ -o $@.new
+define Build/umedia-header
+ fix-u-media-header -T 0x46 -B $(1) -i $@ -o $@.new && mv $@.new $@
+endef
+
+define Build/wrg-header
+ mkwrgimg -i $@ -d "/dev/mtdblock/2" -s $(1) -o $@.new
mv $@.new $@
endef
-ifeq ($(SUBTARGET),rt288x)
-include rt288x.mk
-endif
+define Build/zyimage
+ $(STAGING_DIR_HOST)/bin/zyimage $(1) $@
+endef
+
+define Device/Default
+ PROFILES = Default
+ BLOCKSIZE := 64k
+ KERNEL := $(KERNEL_DTB) | uImage lzma
+ KERNEL_LOADADDR := $(loadaddr-y)
+ LZMA_TEXT_START := 0x81800000
+ SOC := $(DEFAULT_SOC)
+ DEVICE_DTS_DIR := ../dts
+ DEVICE_DTS = $$(SOC)_$(1)
+ NETGEAR_ENC_MODEL :=
+ NETGEAR_ENC_REGION :=
+ NETGEAR_ENC_HW_ID_LIST :=
+ NETGEAR_ENC_MODEL_LIST :=
+ IMAGES := sysupgrade.bin
+ COMPILE :=
+ sysupgrade_bin := append-kernel | append-rootfs | pad-rootfs
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
+endef
+
+define Device/netgear_sercomm_nor
+ DEVICE_VENDOR := NETGEAR
+ IMAGES += factory.img
+ IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \
+ pad-rootfs
+ IMAGE/sysupgrade.bin := $$(IMAGE/default) | check-size | append-metadata
+ IMAGE/factory.img := pad-extra $$$$(SERCOMM_PAD) | $$(IMAGE/default) | \
+ pad-to $$$$(BLOCKSIZE) | sercom-footer | pad-to 128 | \
+ zip $$$$(SERCOMM_HWNAME).bin | sercom-seal
+endef
-ifeq ($(SUBTARGET),rt305x)
-include rt305x.mk
-endif
+define Device/seama
+ SEAMA_MTDBLOCK := 2
+ IMAGES += factory.bin
-ifeq ($(SUBTARGET),rt3883)
-include rt3883.mk
-endif
+ # 64 bytes offset:
+ # - 28 bytes seama_header
+ # - 36 bytes of META data (4-bytes aligned)
+ IMAGE/default := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-rootfs
+ IMAGE/sysupgrade.bin := \
+ $$(IMAGE/default) | seama | pad-rootfs | check-size | append-metadata
+ IMAGE/factory.bin := \
+ $$(IMAGE/default) | pad-rootfs -x 64 | seama | seama-seal | check-size
+ SEAMA_SIGNATURE :=
+endef
-ifeq ($(SUBTARGET),mt7620)
-include mt7620.mk
-endif
+define Device/uimage-lzma-loader
+ LOADER_TYPE := bin
+ KERNEL/lzma-loader := kernel-bin | append-dtb | lzma | loader-kernel
+ KERNEL := $$(KERNEL/lzma-loader) | uImage none
+endef
-ifeq ($(SUBTARGET),mt7621)
-include mt7621.mk
-endif
+define Device/seama-lzma-loader
+ $(Device/seama)
+ $(Device/uimage-lzma-loader)
+ KERNEL := $$(KERNEL/lzma-loader) | relocate-kernel | lzma -a0
+ KERNEL_INITRAMFS := $$(KERNEL/lzma-loader) | uImage none
+endef
-ifeq ($(SUBTARGET),mt76x8)
-include mt76x8.mk
-endif
+include $(SUBTARGET).mk
$(eval $(call BuildImage))
projects / openwrt / openwrt.git / blobdiff