layerscape: add ls1012afrdm device support
authorYangbo Lu <yangbo.lu@nxp.com>
Tue, 24 Oct 2017 10:07:38 +0000 (18:07 +0800)
committerJohn Crispin <john@phrozen.org>
Fri, 10 Nov 2017 22:00:49 +0000 (23:00 +0100)
The QorIQ FRDM-LS1012A Board is an ultra-low-cost
development platform for QorIQ LS1012A Series Network
Processors built on ARM Cortex-A53 processor.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
package/boot/uboot-layerscape-armv8_32b/Makefile
package/boot/uboot-layerscape/Makefile
package/boot/uboot-layerscape/patches/0006-armv8-ls1012afrdm-add-LEDE-boot-support-in-environme.patch [new file with mode: 0644]
package/firmware/layerscape/ppa/Makefile
package/firmware/layerscape/rcw/Makefile
target/linux/layerscape/image/Makefile

index 1e0eb34..0f1ee08 100644 (file)
@@ -17,8 +17,8 @@ PKG_RELEASE:=1
 # uboot-layerscape's source code.
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=https://github.com/yangbolu1991/u-boot-lede.git
-PKG_SOURCE_VERSION:=050c7f11e2ad1a005baa8816699a5c4543dab70c
-PKG_MIRROR_HASH:=ebd63c29417616240090930d50bbce46956de8ddc3f2aa1b238da286ff66794a
+PKG_SOURCE_VERSION:=43cb4c0fcab237f8daa39c393cc1441b76b99fcf
+PKG_MIRROR_HASH:=f0ef74cd0a4aecd727e8c4046b50a869ddec8a4f382da77475ec433f86cdc39a
 
 PKG_MAINTAINER:=Yangbo Lu <yangbo.lu@nxp.com>
 
@@ -47,6 +47,7 @@ define Build/InstallDev
        $(CP) $(PKG_BUILD_DIR)/ls1043ardb-uboot.bin $(STAGING_DIR_IMAGE)/ls1043ardb-armv8_32b-uboot.bin
        $(CP) $(PKG_BUILD_DIR)/ls1046ardb-uboot.bin $(STAGING_DIR_IMAGE)/ls1046ardb-armv8_32b-uboot.bin
        $(CP) $(PKG_BUILD_DIR)/ls1012ardb-uboot.bin $(STAGING_DIR_IMAGE)/ls1012ardb-armv8_32b-uboot.bin
+       $(CP) $(PKG_BUILD_DIR)/ls1012afrdm-uboot.bin $(STAGING_DIR_IMAGE)/ls1012afrdm-armv8_32b-uboot.bin
 endef
 
 $(eval $(call BuildPackage,uboot-layerscape-armv8_32b))
index 4514044..3eb5fb2 100644 (file)
@@ -52,12 +52,18 @@ define U-Boot/ls2088ardb
   UBOOT_CONFIG:=ls2080ardb
 endef
 
+define U-Boot/ls1012afrdm
+  NAME:=NXP ls1012afrdm 64b Dev Board
+  UBOOT_CONFIG:=ls1012afrdm_qspi
+endef
+
 UBOOT_TARGETS := \
        ls1043ardb \
        ls1046ardb \
        ls1012ardb \
        ls1088ardb \
-       ls2088ardb
+       ls2088ardb \
+       ls1012afrdm
 
 define Build/InstallDev
        $(INSTALL_DIR) $(STAGING_DIR_IMAGE)
diff --git a/package/boot/uboot-layerscape/patches/0006-armv8-ls1012afrdm-add-LEDE-boot-support-in-environme.patch b/package/boot/uboot-layerscape/patches/0006-armv8-ls1012afrdm-add-LEDE-boot-support-in-environme.patch
new file mode 100644 (file)
index 0000000..45010a2
--- /dev/null
@@ -0,0 +1,49 @@
+From a5e454a3bb33a456655f08592606e4df34e40110 Mon Sep 17 00:00:00 2001
+From: Yangbo Lu <yangbo.lu@nxp.com>
+Date: Tue, 24 Oct 2017 17:48:08 +0800
+Subject: [PATCH] armv8: ls1012afrdm: add LEDE boot support in environment
+
+Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
+---
+ include/configs/ls1012afrdm.h | 19 +++++++++++++++++++
+ 1 file changed, 19 insertions(+)
+
+diff --git a/include/configs/ls1012afrdm.h b/include/configs/ls1012afrdm.h
+index a3f8824d27..36dff19bdd 100644
+--- a/include/configs/ls1012afrdm.h
++++ b/include/configs/ls1012afrdm.h
+@@ -73,12 +73,31 @@
+       "qspi_bootcmd=echo Trying load from qspi..;"    \
+               "sf probe && sf read $load_addr "       \
+               "$kernel_addr $kernel_size && bootm $load_addr#$board\0" \
++      "lede_setenv=setenv loadaddr 82000000 && " \
++              "setenv fdtaddr 8f000000 && " \
++              "setenv bootargs root=/dev/mtdblock8 " \
++              "rootfstype=ext4 noinitrd " \
++              "earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 " \
++              "mtdparts=1550000.quadspi:1M(rcw),2M(u-boot),1M(u-boot-env)," \
++              "5M(reserved-1),256k(fman),5888k(reserved-2),1M(dtb)," \
++              "16M(kernel),30M(ext4rfs),2M(user)\0" \
++      "lede_run=pfe stop && sf probe 0:0 && " \
++              "sf read $fdtaddr f00000 100000 && " \
++              "sf read $loadaddr 1000000 1000000 && " \
++              "bootm $loadaddr - $fdtaddr\0" \
++      "lede_boot=run lede_setenv;run lede_run\0"
+ #undef CONFIG_BOOTCOMMAND
+ #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+ #define CONFIG_BOOTCOMMAND "run distro_bootcmd;run qspi_bootcmd"
+ #endif
++#undef CONFIG_BOOTCOMMAND
++#define CONFIG_BOOTCOMMAND            "run lede_boot"
++
++#undef CONFIG_BOOTDELAY
++#define CONFIG_BOOTDELAY              3
++
+ /*
+ * USB
+ */
+-- 
+2.14.1
+
index eea8c5f..c72439a 100644 (file)
@@ -53,12 +53,18 @@ define ppa/ls2088ardb
        CONFIG=ppa-ls2088a.itb
 endef
 
+define ppa/ls1012afrdm
+       TITLE=PPA firmware $(PKG_NAME)-$(PKG_VERSION) for NXP ls1012afrdm 64b/32b Dev Board
+       CONFIG=ppa-ls1012a.itb
+endef
+
 PPAS := \
        ls1043ardb \
        ls1046ardb \
        ls1012ardb \
        ls1088ardb \
-       ls2088ardb
+       ls2088ardb \
+       ls1012afrdm
 
 define Package/ppa/template
 define Package/layerscape-ppa-$(1)
index c638f97..f4d9eeb 100644 (file)
@@ -56,12 +56,18 @@ define rcw/ls2088ardb
        CONFIG=ls2088ardb/FFFFFFFF_PP_HH_0x2a_0x41/PBL_0x2a_0x41_1800_700_1866_1600.bin
 endef
 
+define rcw/ls1012afrdm
+       TITLE=RCW binary $(PKG_NAME)-$(PKG_VERSION) for NXP ls1012afrdm 64b/32b Dev Board
+       CONFIG=ls1012afrdm/N_SSNP_3305/PBL_0x33_0x05_800_250_1000_default.bin
+endef
+
 RCWS := \
        ls1043ardb \
        ls1046ardb \
        ls1012ardb \
        ls1088ardb \
-       ls2088ardb
+       ls2088ardb \
+       ls1012afrdm
 
 define Package/rcw/template
 define Package/rcw-layerscape-$(1)
index 26c5767..88bf8d7 100644 (file)
@@ -114,6 +114,21 @@ define Device/ls1012ardb
 endef
 TARGET_DEVICES += ls1012ardb
 
+define Device/ls1012afrdm
+  DEVICE_TITLE := ls1012afrdm-$(SUBTARGET)
+  DEVICE_PACKAGES +=   rcw-layerscape-ls1012afrdm uboot-layerscape-$(SUBTARGET)-ls1012afrdm \
+                       kmod-ppfe layerscape-ppfe layerscape-ppa-ls1012afrdm
+  DEVICE_DTS = ../../../arm64/boot/dts/freescale/fsl-ls1012a-frdm
+  IMAGE/firmware.bin = append-ls-rcw $(1) | pad-to 1M | \
+                       append-ls-uboot $(1) | pad-to 4M | \
+                       append-ls-ppa $(1) | pad-to 10M | \
+                       append-ls-ppfe | pad-to 15M | \
+                       append-ls-dtb $$(DEVICE_DTS) | pad-to 16M | \
+                       append-kernel | pad-to 32M | \
+                       append-ls-rootfs-ext4 $(1) 30M | check-size 67108865
+endef
+TARGET_DEVICES += ls1012afrdm
+
 ifeq ($(SUBTARGET),armv8_64b)
 define Device/ls1088ardb
   DEVICE_TITLE := ls1088ardb-$(SUBTARGET)