brcm63xx: Add Comtrend AR-5315u support
authorDaniel Gonzalez Cabanelas <dgcbueu@gmail.com>
Sat, 12 Aug 2017 10:40:22 +0000 (12:40 +0200)
committerJonas Gorski <jonas.gorski@gmail.com>
Sat, 26 Aug 2017 10:03:55 +0000 (12:03 +0200)
Add support for the Comtrend AR-5315u router

This a BCM6318 based board, 64 MB RAM, 16 MB SPI flash,
with an onboard BCM43217 wifi, 4 ethernet ports and 1
USB host port

Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
[jonas.gorski: refreshed patch]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
target/linux/brcm63xx/base-files/etc/board.d/01_leds
target/linux/brcm63xx/base-files/etc/board.d/02_network
target/linux/brcm63xx/base-files/etc/diag.sh
target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc
target/linux/brcm63xx/base-files/lib/brcm63xx.sh
target/linux/brcm63xx/dts/ar-5315u.dts [new file with mode: 0644]
target/linux/brcm63xx/image/bcm63xx.mk
target/linux/brcm63xx/patches-4.4/579-board_AR-5315u.patch [new file with mode: 0644]

index a909673..ef70cde 100755 (executable)
@@ -15,6 +15,9 @@ a4001n1)
 a4001n)
        ucidef_set_led_usbdev "usb" "USB" "A4001N:green:usb" "1-1"
        ;;
+ar-5315u)
+       ucidef_set_led_usbdev "usb" "USB" "AR-5315u:green:usb" "1-1"
+       ;;
 av4202n)
        ucidef_set_led_netdev "wlan0" "WLAN" "AV4202N:blue:wifi" "wlan0"
        ;;
index 9d9f95d..9addba6 100755 (executable)
@@ -98,6 +98,7 @@ vr-3026e)
                "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "8t@eth0"
        ;;
 
+ar-5315u |\
 vh4032n)
        ucidef_add_switch "switch0" \
                "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "8t@eth0"
index 24939a9..700c9ea 100644 (file)
@@ -12,6 +12,9 @@ set_state() {
        a4001n)
                status_led="A4001N:green:power"
                ;;
+       ar-5315u)
+               status_led="AR-5315u:green:power"
+               ;;
        ar-5381u)
                status_led="AR-5381u:green:power"
                ;;
index 94c4223..bfd485c 100644 (file)
@@ -13,6 +13,7 @@ do_fixcrc() {
 case "$(board_name)" in
        a4001n |\
        a4001n1 |\
+       ar-5315u |\
        ar-5381u |\
        ar-5387un |\
        bcm96328avng |\
index fc3d699..3f46633 100755 (executable)
@@ -87,6 +87,9 @@ brcm63xx_dt_detect() {
        "BT Voyager V2500V")
                board_name="v2500v_bb"
                ;;
+       "Comtrend AR-5315u")
+               board_name="ar-5315u"
+               ;;
        "Comtrend AR-5381u")
                board_name="ar-5381u"
                ;;
diff --git a/target/linux/brcm63xx/dts/ar-5315u.dts b/target/linux/brcm63xx/dts/ar-5315u.dts
new file mode 100644 (file)
index 0000000..63883f0
--- /dev/null
@@ -0,0 +1,106 @@
+/dts-v1/;
+
+#include "bcm6318.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "Comtrend AR-5315u";
+       compatible = "comtrend,ar-5315u", "brcm,bcm6318";
+
+       chosen {
+               bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               debounce-interval = <60>;
+
+               wps {
+                       label = "wps";
+                       gpios = <&pinctrl 3 1>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+               reset {
+                       label = "reset";
+                       gpios = <&pinctrl 33 1>;
+                       linux,code = <KEY_RESTART>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               wps_green {
+                       label = "AR-5315u:green:wps";
+                       gpios = <&pinctrl 0 1>;
+               };
+               power_green {
+                       label = "AR-5315u:green:power";
+                       gpios = <&pinctrl 1 1>;
+                       default-state = "on";
+               };
+               usb_green {
+                       label = "AR-5315u:green:usb";
+                       gpios = <&pinctrl 2 1>;
+               };
+               inet_green {
+                       label = "AR-5315u:green:inet";
+                       gpios = <&pinctrl 8 1>;
+               };
+               inet_red {
+                       label = "AR-5315u:red:inet";
+                       gpios = <&pinctrl 9 1>;
+               };
+               dsl_green {
+                       label = "AR-5315u:green:dsl";
+                       gpios = <&pinctrl 10 1>;
+               };
+               power_red {
+                       label = "AR-5315u:red:power";
+                       gpios = <&pinctrl 11 1>;
+               };
+       };
+};
+
+&hsspi {
+       status = "ok";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               spi-max-frequency = <62500000>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+               reg = <0>;
+
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               linux,part-probe = "bcm63xxpart";
+
+               cfe@0 {
+                       reg = <0x000000 0x010000>;
+                       label = "cfe";
+                       read-only;
+               };
+
+               linux@10000 {
+                       reg = <0x010000 0xfe0000>;
+                       label = "linux";
+               };
+
+               nvram@ff0000 {
+                       reg = <0xff0000 0x010000>;
+                       label = "nvram";
+               };
+       };
+};
+
+&pinctrl {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_ephy0_act_led &pinctrl_ephy1_act_led
+                    &pinctrl_ephy2_act_led &pinctrl_ephy3_act_led>;
+};
index dd1ad86..6ad15a2 100644 (file)
@@ -357,6 +357,19 @@ endef
 TARGET_DEVICES += BTV2500V
 
 ### Comtrend ###
+define Device/AR5315u
+  $(Device/bcm63xx)
+  IMAGES += sysupgrade.bin
+  DEVICE_TITLE := Comtrend AR-5315u
+  DEVICE_DTS := ar-5315u
+  CFE_BOARD_ID := 96318A-1441N1
+  CFE_CHIP_ID := 6318
+  FLASH_MB := 16
+  DEVICE_PACKAGES := \
+    $(B43_PACKAGES) $(USB2_PACKAGES)
+endef
+TARGET_DEVICES += AR5315u
+
 define Device/AR5381u
   $(Device/bcm63xx)
   IMAGES += sysupgrade.bin
diff --git a/target/linux/brcm63xx/patches-4.4/579-board_AR-5315u.patch b/target/linux/brcm63xx/patches-4.4/579-board_AR-5315u.patch
new file mode 100644 (file)
index 0000000..6f7f26c
--- /dev/null
@@ -0,0 +1,87 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -148,6 +148,68 @@ static struct board_info __initdata boar
+       },
+ };
++static struct sprom_fixup __initdata ar5315u_fixups[] = {
++      { .offset = 6, .value = 0x1c00 },
++      { .offset = 65, .value = 0x1255 },
++      { .offset = 97, .value = 0xfe55 },
++      { .offset = 98, .value = 0x171d },
++      { .offset = 99, .value = 0xfa42 },
++      { .offset = 113, .value = 0xfeb7 },
++      { .offset = 114, .value = 0x18cd },
++      { .offset = 115, .value = 0xfa4f },
++      { .offset = 162, .value = 0x6444 },
++      { .offset = 170, .value = 0x6444 },
++      { .offset = 172, .value = 0x6444 },
++};
++
++static struct board_info __initdata board_AR5315u = {
++      .name                           = "96318A-1441N1",
++      .expected_cpu_id                = 0x6318,
++
++      .has_uart0                      = 1,
++      .has_pci                        = 1,
++      .use_fallback_sprom             = 1,
++
++      .has_enetsw                     = 1,
++
++      .has_ohci0                      = 1,
++      .has_ehci0                      = 1,
++      .num_usbh_ports                 = 1,
++
++      .enetsw = {
++              .used_ports = {
++                      [0] = {
++                              .used   = 1,
++                              .phy_id = 1,
++                              .name   = "LAN4",
++                      },
++                      [1] = {
++                              .used   = 1,
++                              .phy_id = 2,
++                              .name   = "LAN3",
++                      },
++                      [2] = {
++                              .used   = 1,
++                              .phy_id = 3,
++                              .name   = "LAN2",
++                      },
++                      [3] = {
++                              .used   = 1,
++                              .phy_id = 4,
++                              .name   = "LAN1",
++                      },
++              },
++      },
++
++      .fallback_sprom = {
++              .type                           = SPROM_BCM43217,
++              .pci_bus                        = 1,
++              .pci_dev                        = 0,
++              .board_fixups                   = ar5315u_fixups,
++              .num_board_fixups               = ARRAY_SIZE(ar5315u_fixups),
++      },
++};
++
+ static struct sprom_fixup __initdata dsl2751b_e1_fixups[] = {
+       { .offset = 96, .value = 0x2046 },
+       { .offset = 97, .value = 0xfe9d },
+@@ -2616,6 +2678,7 @@ static const struct board_info __initcon
+ #ifdef CONFIG_BCM63XX_CPU_6318
+       &board_96318ref,
+       &board_96318ref_p300,
++      &board_AR5315u,
+       &board_dsl_2751b_d1,
+       &board_FAST2704N,
+ #endif
+@@ -2721,6 +2784,7 @@ static struct of_device_id const bcm963x
+ #ifdef CONFIG_BCM63XX_CPU_6318
+       { .compatible = "brcm,bcm96318ref", .data = &board_96318ref, },
+       { .compatible = "brcm,bcm96318ref_p300", .data = &board_96318ref_p300, },
++      { .compatible = "comtrend,ar-5315u", .data = &board_AR5315u, },
+       { .compatible = "d-link,dsl-275xb-d", .data = &board_dsl_2751b_d1, },
+       { .compatible = "sagem,f@st2704n", .data = &board_FAST2704N, },
+ #endif