target/linux/ramips/dts/EX6150.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include "mt7621.dtsi"
   5
   6 #include <dt-bindings/gpio/gpio.h>
   7 #include <dt-bindings/input/input.h>
   8
   9 / {
  10         compatible = "netgear,ex6150", "mediatek,mt7621-soc";
  11         model = "Netgear EX6150";
  12
  13         aliases {
  14                 led-boot = &power_green;
  15                 led-failsafe = &power_amber;
  16                 led-running = &power_green;
  17                 led-upgrade = &power_amber;
  18         };
  19
  20         memory@0 {
  21                 device_type = "memory";
  22                 reg = <0x0 0x4000000>;
  23         };
  24
  25         chosen {
  26                 bootargs = "console=ttyS0,57600";
  27         };
  28
  29         leds {
  30                 compatible = "gpio-leds";
  31
  32                 power_amber: power_amber {
  33                         label = "ex6150:amber:power";
  34                         gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
  35                 };
  36
  37                 power_green: power_green {
  38                         label = "ex6150:green:power";
  39                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  40                 };
  41
  42                 wps {
  43                         label = "ex6150:green:wps";
  44                         gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
  45                 };
  46
  47                 rightarrow {
  48                         label = "ex6150:blue:rightarrow";
  49                         gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
  50                 };
  51
  52                 leftarrow {
  53                         label = "ex6150:blue:leftarrow";
  54                         gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
  55                 };
  56
  57                 router_green {
  58                         label = "ex6150:green:router";
  59                         gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
  60                         linux,default-trigger = "phy1tpt";
  61                 };
  62
  63                 router_red {
  64                         label = "ex6150:red:router";
  65                         gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
  66                 };
  67
  68                 client_green {
  69                         label = "ex6150:green:client";
  70                         gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
  71                         linux,default-trigger = "phy0tpt";
  72                 };
  73
  74                 client_red {
  75                         label = "ex6150:red:client";
  76                         gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
  77                 };
  78         };
  79
  80         keys {
  81                 compatible = "gpio-keys-polled";
  82                 poll-interval = <20>;
  83
  84                 wps {
  85                         label = "wps";
  86                         gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
  87                         linux,code = <KEY_WPS_BUTTON>;
  88                 };
  89
  90                 reset {
  91                         label = "reset";
  92                         gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
  93                         linux,code = <KEY_RESTART>;
  94                 };
  95
  96                 toggle {
  97                         label = "AP/Extender toggle";
  98                         gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
  99                         linux,code = <BTN_0>;
 100                         /* Active when switch is set to "Access Point" */
 101                 };
 102         };
 103 };
 104
 105 &spi0 {
 106         status = "okay";
 107
 108         flash@0 {
 109                 compatible = "jedec,spi-nor";
 110                 reg = <0>;
 111                 spi-max-frequency = <10000000>;
 112
 113                 partitions {
 114                         compatible = "fixed-partitions";
 115                         #address-cells = <1>;
 116                         #size-cells = <1>;
 117
 118                         partition@0 {
 119                                 label = "u-boot";
 120                                 reg = <0x0 0x30000>;
 121                                 read-only;
 122                         };
 123
 124                         partition@30000 {
 125                                 label = "config";
 126                                 reg = <0x30000 0x10000>;
 127                                 read-only;
 128                         };
 129
 130                         factory: partition@40000 {
 131                                 label = "factory";
 132                                 reg = <0x40000 0x10000>;
 133                                 read-only;
 134                         };
 135
 136                         partition@50000 {
 137                                 compatible = "denx,uimage";
 138                                 label = "firmware";
 139                                 reg = <0x50000 0xe80000>;
 140                         };
 141
 142                         partition@ed0000 {
 143                                 label = "ML1";
 144                                 reg = <0xed0000 0x10000>;
 145                                 read-only;
 146                         };
 147
 148                         partition@ef0000 {
 149                                 label = "ML2";
 150                                 reg = <0xef0000 0x20000>;
 151                                 read-only;
 152                         };
 153
 154                         partition@f10000 {
 155                                 label = "ML3";
 156                                 reg = <0xf10000 0x20000>;
 157                                 read-only;
 158                         };
 159
 160                         partition@f30000 {
 161                                 label = "ML4";
 162                                 reg = <0xf30000 0x20000>;
 163                                 read-only;
 164                         };
 165
 166                         partition@f50000 {
 167                                 label = "ML5";
 168                                 reg = <0xf50000 0x20000>;
 169                                 read-only;
 170                         };
 171
 172                         partition@f70000 {
 173                                 label = "ML6";
 174                                 reg = <0xf70000 0x20000>;
 175                                 read-only;
 176                         };
 177
 178                         partition@f90000 {
 179                                 label = "ML7";
 180                                 reg = <0xf90000 0x20000>;
 181                                 read-only;
 182                         };
 183
 184                         partition@fb0000 {
 185                                 label = "T_Meter1";
 186                                 reg = <0xfb0000 0x10000>;
 187                                 read-only;
 188                         };
 189
 190                         partition@fc0000 {
 191                                 label = "T_Meter2";
 192                                 reg = <0xfc0000 0x10000>;
 193                                 read-only;
 194                         };
 195
 196                         partition@fd0000 {
 197                                 label = "POT";
 198                                 reg = <0xfd0000 0x10000>;
 199                                 read-only;
 200                         };
 201
 202                         partition@fe0000 {
 203                                 label = "board_data";
 204                                 reg = <0xfe0000 0x10000>;
 205                                 read-only;
 206                         };
 207
 208                         partition@ff0000 {
 209                                 label = "nvram";
 210                                 reg = <0xff0000 0x10000>;
 211                                 read-only;
 212                         };
 213                 };
 214         };
 215 };
 216
 217 &pcie {
 218         status = "okay";
 219 };
 220
 221 &pcie0 {
 222         wifi@0,0 {
 223                 reg = <0x0000 0 0 0 0>;
 224                 mediatek,mtd-eeprom = <&factory 0x8000>;
 225                 ieee80211-freq-limit = <5000000 6000000>;
 226         };
 227 };
 228
 229 &pcie1 {
 230         wifi@0,0 {
 231                 reg = <0x0000 0 0 0 0>;
 232                 mediatek,mtd-eeprom = <&factory 0x0000>;
 233                 ieee80211-freq-limit = <2400000 2500000>;
 234         };
 235 };
 236
 237 &ethernet {
 238         mtd-mac-address = <&factory 0x00000004>;
 239 };
 240
 241 &pinctrl {
 242         state_default: pinctrl0 {
 243                 gpio {
 244                         ralink,group = "sdhci", "rgmii2", "jtag";
 245                         ralink,function = "gpio";
 246                 };
 247         };
 248 };