kirkwood: set default state for status LEDs in device tree

This adds the default-state = "on"; statement for the power or
primary status LED in DTS on kirkwood. This will ensure that this
LED will be lit up very early in the boot process (i.e. before
diag.sh is executed) and thus will provide an additional hint to the
user when problems arise during early boot process.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

diff --git a/target/linux/kirkwood/patches-4.14/100-ib62x0.patch b/target/linux/kirkwood/patches-4.14/100-ib62x0.patch
index 494540d730fe8b200c6bea2494c4f5cd57d92565..0637c24b631867111ead70b8f21d0b98576b5cea 100644 (file)
--- a/target/linux/kirkwood/patches-4.14/100-ib62x0.patch
+++ b/target/linux/kirkwood/patches-4.14/100-ib62x0.patch
@@ -16,7 +16,7 @@
  
        memory {
                device_type = "memory";
-@@ -81,12 +88,11 @@
+@@ -81,12 +88,12 @@
                             &pmx_led_usb_transfer>;
                pinctrl-names = "default";
  
@@ -25,13 +25,14 @@
                        label = "ib62x0:green:os";
                        gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
 -                      default-state = "keep";
++                      default-state = "on";
                };
 -              red-os {
 +              led_red_os: red-os {
                        label = "ib62x0:red:os";
                        gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
                };
-@@ -118,13 +124,13 @@
+@@ -118,13 +125,13 @@
        };
  
        partition@100000 {

diff --git a/target/linux/kirkwood/patches-4.14/101-iconnect.patch b/target/linux/kirkwood/patches-4.14/101-iconnect.patch
index f36f50eae408057a365d2017dbd9a90f2060476b..9fd14a955b50f0290e7038cb976695c5f6f63dc2 100644 (file)
--- a/target/linux/kirkwood/patches-4.14/101-iconnect.patch
+++ b/target/linux/kirkwood/patches-4.14/101-iconnect.patch
@@ -23,7 +23,7 @@
        };
  
        ocp@f1000000 {
-@@ -89,12 +94,11 @@
+@@ -89,12 +94,12 @@
                        gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
                        default-state = "on";
                };
@@ -32,13 +32,14 @@
                        label = "power:blue";
                        gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
 -                      default-state = "keep";
++                      default-state = "on";
                };
 -              power-red {
 +              led_power_red: power-red {
                        label = "power:red";
                        gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
                };
-@@ -146,28 +150,23 @@
+@@ -146,28 +151,23 @@
        status = "okay";
  
        partition@0 {

diff --git a/target/linux/kirkwood/patches-4.14/102-dockstar.patch b/target/linux/kirkwood/patches-4.14/102-dockstar.patch
index fb05e469bcfd10756a196ccb7c88824d01a8e10c..127f84962c195ee63e69db988dfc72c993c428c5 100644 (file)
--- a/target/linux/kirkwood/patches-4.14/102-dockstar.patch
+++ b/target/linux/kirkwood/patches-4.14/102-dockstar.patch
@@ -14,7 +14,7 @@
        memory {
                device_type = "memory";
                reg = <0x00000000 0x8000000>;
-@@ -42,12 +49,11 @@
+@@ -42,12 +49,12 @@
                pinctrl-0 = <&pmx_led_green &pmx_led_orange>;
                pinctrl-names = "default";
  
@@ -23,13 +23,14 @@
                        label = "status:green:health";
                        gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 -                      default-state = "keep";
++                      default-state = "on";
                };
 -              fault {
 +              led_fault: fault {
                        label = "status:orange:fault";
                        gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
                };
-@@ -78,18 +84,22 @@
+@@ -78,18 +85,22 @@
  
        partition@0 {
                label = "u-boot";

diff --git a/target/linux/kirkwood/patches-4.14/103-iomega-ix2-200.patch b/target/linux/kirkwood/patches-4.14/103-iomega-ix2-200.patch
index 73655e129307d32362f4e3b1a82cff520c594497..9313b4bc3e30b993a6403e773660f3d7d0e8c013 100644 (file)
--- a/target/linux/kirkwood/patches-4.14/103-iomega-ix2-200.patch
+++ b/target/linux/kirkwood/patches-4.14/103-iomega-ix2-200.patch
@@ -14,7 +14,7 @@
        memory {
                device_type = "memory";
                reg = <0x00000000 0x10000000>;
-@@ -127,16 +134,15 @@
+@@ -127,16 +134,16 @@
                              &pmx_led_rebuild &pmx_led_health >;
                pinctrl-names = "default";
  
@@ -23,6 +23,7 @@
                        label = "status:white:power_led";
                        gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
 -                      default-state = "keep";
++                      default-state = "on";
                };
                rebuild_led {
                        label = "status:white:rebuild_led";
@@ -33,7 +34,7 @@
                        label = "status:red:health_led";
                        gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
                };
-@@ -186,18 +192,18 @@
+@@ -186,18 +193,18 @@
        };
  
        partition@a0000 {
@@ -55,7 +56,7 @@
                reg = <0x400000 0x1C00000>;
        };
  };
-@@ -211,7 +217,7 @@
+@@ -211,7 +218,7 @@
  };
  
  &eth0 {

diff --git a/target/linux/kirkwood/patches-4.14/104-ea3500.patch b/target/linux/kirkwood/patches-4.14/104-ea3500.patch
index 2aef79035e5e81260cd62d2d670a3c0289f2966c..851875c64575dc213d0015db9407bf41180b9fe6 100644 (file)
--- a/target/linux/kirkwood/patches-4.14/104-ea3500.patch
+++ b/target/linux/kirkwood/patches-4.14/104-ea3500.patch
@@ -10,7 +10,7 @@
        kirkwood-lsxhl.dtb \
 --- /dev/null
 +++ b/arch/arm/boot/dts/kirkwood-linksys-audi.dts
-@@ -0,0 +1,249 @@
+@@ -0,0 +1,250 @@
 +/*
 + * kirkwood-linksys-audi.dts - Device Tree file for Linksys EA3500
 + *
@@ -78,6 +78,7 @@
 +              led_power: power {
 +                      label = "audi:green:power";
 +                      gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
++                      default-state = "on";
 +              };
 +      };
 +

diff --git a/target/linux/kirkwood/patches-4.14/105-ea4500.patch b/target/linux/kirkwood/patches-4.14/105-ea4500.patch
index 0c2b30df0dc22219fd3a849b7e55c906656675ea..cfa499c91130cabf337a7de395f28634e4f55729 100644 (file)
--- a/target/linux/kirkwood/patches-4.14/105-ea4500.patch
+++ b/target/linux/kirkwood/patches-4.14/105-ea4500.patch
@@ -11,7 +11,7 @@
                serial0 = &uart0;
        };
  
-@@ -58,7 +62,7 @@
+@@ -58,9 +62,10 @@
                pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >;
                pinctrl-names = "default";
  
@@ -19,8 +19,11 @@
 +              led_white_health: white-health {
                        label = "viper:white:health";
                        gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
++                      default-state = "on";
                };
-@@ -69,9 +73,18 @@
+ 
+               white-pulse {
+@@ -69,9 +74,18 @@
                };
        };
  
@@ -41,7 +44,7 @@
                compatible = "marvell,dsa";
                #address-cells = <2>;
                #size-cells = <0>;
-@@ -163,22 +176,22 @@
+@@ -163,22 +177,22 @@
                };
  
                partition@200000 {
@@ -68,7 +71,7 @@
                        reg = <0x1EA0000 0x1760000>;
                };
  
-@@ -209,53 +222,6 @@
+@@ -209,53 +223,6 @@
  
  &mdio {
        status = "okay";
@@ -122,7 +125,7 @@
  };
  
  &uart0 {
-@@ -274,10 +240,14 @@
+@@ -274,10 +241,14 @@
  };
  
  /* eth1 is connected to the switch at port 6. However DSA only supports a

diff --git a/target/linux/kirkwood/patches-4.14/105-goflexhome.patch b/target/linux/kirkwood/patches-4.14/105-goflexhome.patch
index 8f181ac4722d0874426d14e64ba4ee9dfeab1d54..fcccbf7f39363aaa094a186d8221ae9304e0addb 100644 (file)
--- a/target/linux/kirkwood/patches-4.14/105-goflexhome.patch
+++ b/target/linux/kirkwood/patches-4.14/105-goflexhome.patch
@@ -10,7 +10,7 @@
        kirkwood-ib62x0.dtb \
 --- /dev/null
 +++ b/arch/arm/boot/dts/kirkwood-goflexhome.dts
-@@ -0,0 +1,123 @@
+@@ -0,0 +1,124 @@
 +/dts-v1/;
 +
 +#include "kirkwood.dtsi"
@@ -72,6 +72,7 @@
 +              led_health: health {
 +                      label = "status:green:health";
 +                      gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
++                      default-state = "on";
 +              };
 +              led_fault: fault {
 +                      label = "status:orange:fault";

diff --git a/target/linux/kirkwood/patches-4.14/106-goflexnet.patch b/target/linux/kirkwood/patches-4.14/106-goflexnet.patch
index 340a4809de595fe78006fbaa933d1b8c12883b6a..82cf90841e30b7f05ce9ae9dbe290bd7883222bc 100644 (file)
--- a/target/linux/kirkwood/patches-4.14/106-goflexnet.patch
+++ b/target/linux/kirkwood/patches-4.14/106-goflexnet.patch
@@ -14,7 +14,7 @@
        memory {
                device_type = "memory";
                reg = <0x00000000 0x8000000>;
-@@ -85,12 +92,11 @@
+@@ -85,12 +92,12 @@
                            >;
                pinctrl-names = "default";
  
@@ -23,13 +23,14 @@
                        label = "status:green:health";
                        gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 -                      default-state = "keep";
++                      default-state = "on";
                };
 -              fault {
 +              led_fault: fault {
                        label = "status:orange:fault";
                        gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
                };
-@@ -159,18 +165,8 @@
+@@ -159,18 +166,8 @@
        };
  
        partition@100000 {

diff --git a/target/linux/kirkwood/patches-4.14/107-02-nsa310b.patch b/target/linux/kirkwood/patches-4.14/107-02-nsa310b.patch
index 2da8f4f0d1b1eabc2c56f925fe4dc35918afff1f..1f2718fb80cc5bec6c0bfca79c0481f913218fa0 100644 (file)
--- a/target/linux/kirkwood/patches-4.14/107-02-nsa310b.patch
+++ b/target/linux/kirkwood/patches-4.14/107-02-nsa310b.patch
@@ -20,7 +20,7 @@ NOTE: this patch can be upstreamed as-is, LEDE-specific
        kirkwood-openblocks_a6.dtb \
 --- /dev/null
 +++ b/arch/arm/boot/dts/kirkwood-nsa310b.dts
-@@ -0,0 +1,131 @@
+@@ -0,0 +1,132 @@
 +/dts-v1/;
 +
 +#include "kirkwood-nsa3x0-common.dtsi"
@@ -113,6 +113,7 @@ NOTE: this patch can be upstreamed as-is, LEDE-specific
 +              led_green_sys: green-sys {
 +                      label = "nsa310:green:sys";
 +                      gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
++                      default-state = "on";
 +              };
 +              led_red_sys: red-sys {
 +                      label = "nsa310:red:sys";

diff --git a/target/linux/kirkwood/patches-4.14/107-03-nsa325.patch b/target/linux/kirkwood/patches-4.14/107-03-nsa325.patch
index 5d1963b2b0327b1fdab7b60bd501b28b6e48f9a5..e6935613e33a169c7aad5078b74b74a62fa95026 100644 (file)
--- a/target/linux/kirkwood/patches-4.14/107-03-nsa325.patch
+++ b/target/linux/kirkwood/patches-4.14/107-03-nsa325.patch
@@ -14,7 +14,7 @@
        memory {
                device_type = "memory";
                reg = <0x00000000 0x20000000>;
-@@ -165,11 +172,11 @@
+@@ -165,11 +172,12 @@
                             &pmx_led_hdd1_green &pmx_led_hdd1_red>;
                pinctrl-names = "default";
  
@@ -22,6 +22,7 @@
 +              led_green_sys: green-sys {
                        label = "nsa325:green:sys";
                        gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
++                      default-state = "on";
                };
 -              orange-sys {
 +              led_orange_sys: orange-sys {

diff --git a/target/linux/kirkwood/patches-4.14/108-on100.patch b/target/linux/kirkwood/patches-4.14/108-on100.patch
index 42da3e733225c472bd969e8de9bd8f3084c02c58..78f2f4a3fef61e76473bde5c7fa1a306575a2366 100644 (file)
--- a/target/linux/kirkwood/patches-4.14/108-on100.patch
+++ b/target/linux/kirkwood/patches-4.14/108-on100.patch
@@ -1,6 +1,6 @@
 --- /dev/null
 +++ b/arch/arm/boot/dts/kirkwood-on100.dts
-@@ -0,0 +1,164 @@
+@@ -0,0 +1,165 @@
 +/dts-v1/;
 +
 +#include "kirkwood.dtsi"
@@ -50,6 +50,7 @@
 +              led_health_green: health_green {
 +                      label = "on100:green:health";
 +                      gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
++                      default-state = "on";
 +              };
 +
 +              led_health_red: health_red {

diff --git a/target/linux/kirkwood/patches-4.14/109-pogoplug_v4.patch b/target/linux/kirkwood/patches-4.14/109-pogoplug_v4.patch
index f23cd93f3366503f797e2c4667c0c8372338ceed..f13d459223c0e60314464eebd7ec951fd324954c 100644 (file)
--- a/target/linux/kirkwood/patches-4.14/109-pogoplug_v4.patch
+++ b/target/linux/kirkwood/patches-4.14/109-pogoplug_v4.patch
@@ -32,7 +32,7 @@
                        gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
                };
        };
-@@ -48,12 +56,11 @@
+@@ -48,12 +56,12 @@
                pinctrl-0 = <&pmx_led_green &pmx_led_red>;
                pinctrl-names = "default";
  
@@ -40,14 +40,14 @@
 +              led_health: health {
                        label = "pogoplugv4:green:health";
                        gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
--                      default-state = "on";
+                       default-state = "on";
                };
 -              fault {
 +              led_fault: fault {
                        label = "pogoplugv4:red:fault";
                        gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
                };
-@@ -137,29 +144,19 @@
+@@ -137,29 +145,19 @@
                #size-cells = <1>;
  
                partition@0 {

diff --git a/target/linux/kirkwood/patches-4.14/110-pogo_e02.patch b/target/linux/kirkwood/patches-4.14/110-pogo_e02.patch
index 8bba4b1a3c42993daf8fc9962c5e99db3ebc6d30..b2a9c461d8c7d99dfe7d762575d6642efe73b21d 100644 (file)
--- a/target/linux/kirkwood/patches-4.14/110-pogo_e02.patch
+++ b/target/linux/kirkwood/patches-4.14/110-pogo_e02.patch
@@ -14,7 +14,7 @@
        memory {
                device_type = "memory";
                reg = <0x00000000 0x10000000>;
-@@ -35,12 +42,11 @@
+@@ -35,12 +42,12 @@
        gpio-leds {
                compatible = "gpio-leds";
  
@@ -23,6 +23,7 @@
                        label = "pogo_e02:green:health";
                        gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
 -                      default-state = "keep";
++                      default-state = "on";
                };
 -              fault {
 +              led_fault: fault {

diff --git a/target/linux/kirkwood/patches-4.19/100-ib62x0.patch b/target/linux/kirkwood/patches-4.19/100-ib62x0.patch
index 494540d730fe8b200c6bea2494c4f5cd57d92565..0637c24b631867111ead70b8f21d0b98576b5cea 100644 (file)
--- a/target/linux/kirkwood/patches-4.19/100-ib62x0.patch
+++ b/target/linux/kirkwood/patches-4.19/100-ib62x0.patch
@@ -16,7 +16,7 @@
  
        memory {
                device_type = "memory";
-@@ -81,12 +88,11 @@
+@@ -81,12 +88,12 @@
                             &pmx_led_usb_transfer>;
                pinctrl-names = "default";
  
@@ -25,13 +25,14 @@
                        label = "ib62x0:green:os";
                        gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
 -                      default-state = "keep";
++                      default-state = "on";
                };
 -              red-os {
 +              led_red_os: red-os {
                        label = "ib62x0:red:os";
                        gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
                };
-@@ -118,13 +124,13 @@
+@@ -118,13 +125,13 @@
        };
  
        partition@100000 {

diff --git a/target/linux/kirkwood/patches-4.19/101-iconnect.patch b/target/linux/kirkwood/patches-4.19/101-iconnect.patch
index f36f50eae408057a365d2017dbd9a90f2060476b..9fd14a955b50f0290e7038cb976695c5f6f63dc2 100644 (file)
--- a/target/linux/kirkwood/patches-4.19/101-iconnect.patch
+++ b/target/linux/kirkwood/patches-4.19/101-iconnect.patch
@@ -23,7 +23,7 @@
        };
  
        ocp@f1000000 {
-@@ -89,12 +94,11 @@
+@@ -89,12 +94,12 @@
                        gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
                        default-state = "on";
                };
@@ -32,13 +32,14 @@
                        label = "power:blue";
                        gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
 -                      default-state = "keep";
++                      default-state = "on";
                };
 -              power-red {
 +              led_power_red: power-red {
                        label = "power:red";
                        gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
                };
-@@ -146,28 +150,23 @@
+@@ -146,28 +151,23 @@
        status = "okay";
  
        partition@0 {

diff --git a/target/linux/kirkwood/patches-4.19/102-dockstar.patch b/target/linux/kirkwood/patches-4.19/102-dockstar.patch
index fb05e469bcfd10756a196ccb7c88824d01a8e10c..127f84962c195ee63e69db988dfc72c993c428c5 100644 (file)
--- a/target/linux/kirkwood/patches-4.19/102-dockstar.patch
+++ b/target/linux/kirkwood/patches-4.19/102-dockstar.patch
@@ -14,7 +14,7 @@
        memory {
                device_type = "memory";
                reg = <0x00000000 0x8000000>;
-@@ -42,12 +49,11 @@
+@@ -42,12 +49,12 @@
                pinctrl-0 = <&pmx_led_green &pmx_led_orange>;
                pinctrl-names = "default";
  
@@ -23,13 +23,14 @@
                        label = "status:green:health";
                        gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 -                      default-state = "keep";
++                      default-state = "on";
                };
 -              fault {
 +              led_fault: fault {
                        label = "status:orange:fault";
                        gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
                };
-@@ -78,18 +84,22 @@
+@@ -78,18 +85,22 @@
  
        partition@0 {
                label = "u-boot";

diff --git a/target/linux/kirkwood/patches-4.19/103-iomega-ix2-200.patch b/target/linux/kirkwood/patches-4.19/103-iomega-ix2-200.patch
index 73655e129307d32362f4e3b1a82cff520c594497..9313b4bc3e30b993a6403e773660f3d7d0e8c013 100644 (file)
--- a/target/linux/kirkwood/patches-4.19/103-iomega-ix2-200.patch
+++ b/target/linux/kirkwood/patches-4.19/103-iomega-ix2-200.patch
@@ -14,7 +14,7 @@
        memory {
                device_type = "memory";
                reg = <0x00000000 0x10000000>;
-@@ -127,16 +134,15 @@
+@@ -127,16 +134,16 @@
                              &pmx_led_rebuild &pmx_led_health >;
                pinctrl-names = "default";
  
@@ -23,6 +23,7 @@
                        label = "status:white:power_led";
                        gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
 -                      default-state = "keep";
++                      default-state = "on";
                };
                rebuild_led {
                        label = "status:white:rebuild_led";
@@ -33,7 +34,7 @@
                        label = "status:red:health_led";
                        gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
                };
-@@ -186,18 +192,18 @@
+@@ -186,18 +193,18 @@
        };
  
        partition@a0000 {
@@ -55,7 +56,7 @@
                reg = <0x400000 0x1C00000>;
        };
  };
-@@ -211,7 +217,7 @@
+@@ -211,7 +218,7 @@
  };
  
  &eth0 {

diff --git a/target/linux/kirkwood/patches-4.19/104-ea3500.patch b/target/linux/kirkwood/patches-4.19/104-ea3500.patch
index 466bf714c42d2d9261e83fe1a7ea41f892602b93..04a919e07267d8fd365a3b7ff23f9b00432c2ffd 100644 (file)
--- a/target/linux/kirkwood/patches-4.19/104-ea3500.patch
+++ b/target/linux/kirkwood/patches-4.19/104-ea3500.patch
@@ -10,7 +10,7 @@
        kirkwood-lsxhl.dtb \
 --- /dev/null
 +++ b/arch/arm/boot/dts/kirkwood-linksys-audi.dts
-@@ -0,0 +1,250 @@
+@@ -0,0 +1,251 @@
 +// SPDX-License-Identifier: GPL-2.0
 +/*
 + * kirkwood-linksys-audi.dts - Device Tree file for Linksys EA3500
@@ -74,6 +74,7 @@
 +              led_power: power {
 +                      label = "audi:green:power";
 +                      gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
++                      default-state = "on";
 +              };
 +      };
 +

diff --git a/target/linux/kirkwood/patches-4.19/105-ea4500.patch b/target/linux/kirkwood/patches-4.19/105-ea4500.patch
index 601c1cad6d8e3344c19baa6ada44074ff595c761..5948a1bdf1e857748dc5e904341b532f5d578bcd 100644 (file)
--- a/target/linux/kirkwood/patches-4.19/105-ea4500.patch
+++ b/target/linux/kirkwood/patches-4.19/105-ea4500.patch
@@ -11,7 +11,7 @@
                serial0 = &uart0;
        };
  
-@@ -56,7 +60,7 @@
+@@ -56,9 +60,10 @@
                pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >;
                pinctrl-names = "default";
  
@@ -19,8 +19,11 @@
 +              led_white_health: white-health {
                        label = "viper:white:health";
                        gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
++                      default-state = "on";
                };
-@@ -67,9 +71,23 @@
+ 
+               white-pulse {
+@@ -67,9 +72,23 @@
                };
        };
  
@@ -46,7 +49,7 @@
                compatible = "marvell,dsa";
                #address-cells = <2>;
                #size-cells = <0>;
-@@ -161,22 +179,22 @@
+@@ -161,22 +180,22 @@
                };
  
                partition@200000 {
@@ -73,7 +76,7 @@
                        reg = <0x1EA0000 0x1760000>;
                };
  
-@@ -207,53 +225,6 @@
+@@ -207,53 +226,6 @@
  
  &mdio {
        status = "okay";
@@ -127,7 +130,7 @@
  };
  
  &uart0 {
-@@ -272,10 +243,14 @@
+@@ -272,10 +244,14 @@
  };
  
  /* eth1 is connected to the switch at port 6. However DSA only supports a

diff --git a/target/linux/kirkwood/patches-4.19/105-goflexhome.patch b/target/linux/kirkwood/patches-4.19/105-goflexhome.patch
index db43a2721981dfe5965c4d8cd691cbe41ba3873f..cca65f2141be025b8eab4dcc346f3a9705f679e0 100644 (file)
--- a/target/linux/kirkwood/patches-4.19/105-goflexhome.patch
+++ b/target/linux/kirkwood/patches-4.19/105-goflexhome.patch
@@ -10,7 +10,7 @@
        kirkwood-ib62x0.dtb \
 --- /dev/null
 +++ b/arch/arm/boot/dts/kirkwood-goflexhome.dts
-@@ -0,0 +1,123 @@
+@@ -0,0 +1,124 @@
 +/dts-v1/;
 +
 +#include "kirkwood.dtsi"
@@ -72,6 +72,7 @@
 +              led_health: health {
 +                      label = "status:green:health";
 +                      gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
++                      default-state = "on";
 +              };
 +              led_fault: fault {
 +                      label = "status:orange:fault";

diff --git a/target/linux/kirkwood/patches-4.19/106-goflexnet.patch b/target/linux/kirkwood/patches-4.19/106-goflexnet.patch
index 340a4809de595fe78006fbaa933d1b8c12883b6a..82cf90841e30b7f05ce9ae9dbe290bd7883222bc 100644 (file)
--- a/target/linux/kirkwood/patches-4.19/106-goflexnet.patch
+++ b/target/linux/kirkwood/patches-4.19/106-goflexnet.patch
@@ -14,7 +14,7 @@
        memory {
                device_type = "memory";
                reg = <0x00000000 0x8000000>;
-@@ -85,12 +92,11 @@
+@@ -85,12 +92,12 @@
                            >;
                pinctrl-names = "default";
  
@@ -23,13 +23,14 @@
                        label = "status:green:health";
                        gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 -                      default-state = "keep";
++                      default-state = "on";
                };
 -              fault {
 +              led_fault: fault {
                        label = "status:orange:fault";
                        gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
                };
-@@ -159,18 +165,8 @@
+@@ -159,18 +166,8 @@
        };
  
        partition@100000 {

diff --git a/target/linux/kirkwood/patches-4.19/107-02-nsa310b.patch b/target/linux/kirkwood/patches-4.19/107-02-nsa310b.patch
index 5e2b1d8d9c3bc238a361c1caeac13e00d4b817ba..ba2ae7d2de8a204b399586b8d1f66d2f7285ede0 100644 (file)
--- a/target/linux/kirkwood/patches-4.19/107-02-nsa310b.patch
+++ b/target/linux/kirkwood/patches-4.19/107-02-nsa310b.patch
@@ -20,7 +20,7 @@ NOTE: this patch can be upstreamed as-is, LEDE-specific
        kirkwood-openblocks_a6.dtb \
 --- /dev/null
 +++ b/arch/arm/boot/dts/kirkwood-nsa310b.dts
-@@ -0,0 +1,131 @@
+@@ -0,0 +1,132 @@
 +/dts-v1/;
 +
 +#include "kirkwood-nsa3x0-common.dtsi"
@@ -113,6 +113,7 @@ NOTE: this patch can be upstreamed as-is, LEDE-specific
 +              led_green_sys: green-sys {
 +                      label = "nsa310:green:sys";
 +                      gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
++                      default-state = "on";
 +              };
 +              led_red_sys: red-sys {
 +                      label = "nsa310:red:sys";

diff --git a/target/linux/kirkwood/patches-4.19/107-03-nsa325.patch b/target/linux/kirkwood/patches-4.19/107-03-nsa325.patch
index aefb5c34dcc6ddfe469056e230a5b01829712bcf..36c77cd44a298f27236d6f8247907aac0b891736 100644 (file)
--- a/target/linux/kirkwood/patches-4.19/107-03-nsa325.patch
+++ b/target/linux/kirkwood/patches-4.19/107-03-nsa325.patch
@@ -14,7 +14,7 @@
        memory {
                device_type = "memory";
                reg = <0x00000000 0x20000000>;
-@@ -162,11 +169,11 @@
+@@ -162,11 +169,12 @@
                             &pmx_led_hdd1_green &pmx_led_hdd1_red>;
                pinctrl-names = "default";
  
@@ -22,6 +22,7 @@
 +              led_green_sys: green-sys {
                        label = "nsa325:green:sys";
                        gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
++                      default-state = "on";
                };
 -              orange-sys {
 +              led_orange_sys: orange-sys {

diff --git a/target/linux/kirkwood/patches-4.19/108-on100.patch b/target/linux/kirkwood/patches-4.19/108-on100.patch
index fa92509e2e055f22a679afb6ca42084287b32411..bc0916f1617ac71d34bd564672aa9aa49131b7a7 100644 (file)
--- a/target/linux/kirkwood/patches-4.19/108-on100.patch
+++ b/target/linux/kirkwood/patches-4.19/108-on100.patch
@@ -1,6 +1,6 @@
 --- /dev/null
 +++ b/arch/arm/boot/dts/kirkwood-on100.dts
-@@ -0,0 +1,162 @@
+@@ -0,0 +1,163 @@
 +/dts-v1/;
 +
 +#include "kirkwood.dtsi"
@@ -48,6 +48,7 @@
 +              led_health_green: health_green {
 +                      label = "on100:green:health";
 +                      gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
++                      default-state = "on";
 +              };
 +
 +              led_health_red: health_red {

diff --git a/target/linux/kirkwood/patches-4.19/109-pogoplug_v4.patch b/target/linux/kirkwood/patches-4.19/109-pogoplug_v4.patch
index 6967a0c815ec145f43359ec65446da0642755636..813650124cc52c1eab91944aabdc71bc690a26d6 100644 (file)
--- a/target/linux/kirkwood/patches-4.19/109-pogoplug_v4.patch
+++ b/target/linux/kirkwood/patches-4.19/109-pogoplug_v4.patch
@@ -32,7 +32,7 @@
                        gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
                };
        };
-@@ -48,12 +56,11 @@
+@@ -48,12 +56,12 @@
                pinctrl-0 = <&pmx_led_green &pmx_led_red>;
                pinctrl-names = "default";
  
@@ -40,14 +40,14 @@
 +              led_health: health {
                        label = "pogoplugv4:green:health";
                        gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
--                      default-state = "on";
+                       default-state = "on";
                };
 -              fault {
 +              led_fault: fault {
                        label = "pogoplugv4:red:fault";
                        gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
                };
-@@ -137,29 +144,19 @@
+@@ -137,29 +145,19 @@
                #size-cells = <1>;
  
                partition@0 {

diff --git a/target/linux/kirkwood/patches-4.19/110-pogo_e02.patch b/target/linux/kirkwood/patches-4.19/110-pogo_e02.patch
index 82a13cca47ff79978f84ece2a40ff7d2b308b64d..59d2893466e16d1dd5f627d6170c1377a757b6d7 100644 (file)
--- a/target/linux/kirkwood/patches-4.19/110-pogo_e02.patch
+++ b/target/linux/kirkwood/patches-4.19/110-pogo_e02.patch
@@ -14,7 +14,7 @@
        memory {
                device_type = "memory";
                reg = <0x00000000 0x10000000>;
-@@ -33,12 +40,11 @@
+@@ -33,12 +40,12 @@
        gpio-leds {
                compatible = "gpio-leds";
  
@@ -23,6 +23,7 @@
                        label = "pogo_e02:green:health";
                        gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
 -                      default-state = "keep";
++                      default-state = "on";
                };
 -              fault {
 +              led_fault: fault {