ar71xx: don't use the unknown LED on the ZCN-1523-5 board

According to #12421, GPIO 1 controls the power
output on the unused lines of the LAN2 port.
Remove the LED definition in order to prevent
possible permanent hardware damage.

If someone needs that, the power-out feature can
be controlled via the GPIO sysfs interface.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34076

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-zcn-1523h.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-zcn-1523h.c
index 3a6fe21ed223704dc641075169db7a1a46e3886c..bc79ab9953f711fec631caa7d43b694a51db154c 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-zcn-1523h.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-zcn-1523h.c
@@ -27,7 +27,7 @@
 #define ZCN_1523H_2_GPIO_LED_MEDIUM    14
 #define ZCN_1523H_2_GPIO_LED_STRONG    15
 
-#define ZCN_1523H_5_GPIO_LED_UNKNOWN   1
+#define ZCN_1523H_5_GPIO_LAN2_POWER    1
 #define ZCN_1523H_5_GPIO_LED_LAN2      13
 #define ZCN_1523H_5_GPIO_LED_WEAK      14
 #define ZCN_1523H_5_GPIO_LED_MEDIUM    15
@@ -92,9 +92,6 @@ static struct gpio_led zcn_1523h_5_leds_gpio[] __initdata = {
                .name           = "zcn-1523h:green:lan2",
                .gpio           = ZCN_1523H_5_GPIO_LED_LAN2,
                .active_low     = 1,
-       }, {
-               .name           = "zcn-1523h:amber:unknown",
-               .gpio           = ZCN_1523H_5_GPIO_LED_UNKNOWN,
        }
 };