target/linux/ath79/dts/ar9341_pcs_cr3000.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "ar9341.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7 #include <dt-bindings/leds/common.h>
   8
   9 / {
  10         model = "PowerCloud Systems CR3000";
  11         compatible = "pcs,cr3000", "qca,ar9341";
  12
  13         aliases {
  14                 led-boot = &led_power;
  15                 led-failsafe = &led_power;
  16                 led-running = &led_power;
  17                 led-upgrade = &led_power;
  18         };
  19
  20         keys {
  21                 compatible = "gpio-keys";
  22
  23                 pinctrl-names = "default";
  24                 pinctrl-0 = <&jtag_disable_pins>;
  25
  26                 reset {
  27                         label = "Reset button";
  28                         linux,code = <KEY_RESTART>;
  29                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  30                         debounce-interval = <60>;
  31                 };
  32
  33                 wps {
  34                         label = "WPS button";
  35                         linux,code = <KEY_WPS_BUTTON>;
  36                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  37                         debounce-interval = <60>;
  38                 };
  39         };
  40
  41         leds {
  42                 compatible = "gpio-leds";
  43
  44                 led_power: power {
  45                         function = LED_FUNCTION_POWER;
  46                         color = <LED_COLOR_ID_AMBER>;
  47                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  48                         default-state = "on";
  49                 };
  50
  51                 wlan2g {
  52                         function = LED_FUNCTION_WLAN;
  53                         color = <LED_COLOR_ID_BLUE>;
  54                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  55                         linux,default-trigger = "phy0tpt";
  56                 };
  57
  58                 wan {
  59                         function = LED_FUNCTION_WAN;
  60                         color = <LED_COLOR_ID_BLUE>;
  61                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  62                 };
  63
  64                 lan1 {
  65                         label = "blue:lan1";
  66                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  67                 };
  68
  69                 lan2 {
  70                         label = "blue:lan2";
  71                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
  72                 };
  73
  74                 lan3 {
  75                         label = "blue:lan3";
  76                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
  77                 };
  78
  79                 lan4 {
  80                         label = "blue:lan4";
  81                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  82                 };
  83         };
  84 };
  85
  86 &ref {
  87         clock-frequency = <25000000>;
  88 };
  89
  90 &spi {
  91         status = "okay";
  92
  93         flash@0 {
  94                 compatible = "jedec,spi-nor";
  95                 reg = <0>;
  96                 spi-max-frequency = <25000000>;
  97
  98                 partitions {
  99                         compatible = "fixed-partitions";
 100                         #address-cells = <1>;
 101                         #size-cells = <1>;
 102
 103                         uboot: partition@0 {
 104                                 label = "u-boot";
 105                                 reg = <0x000000 0x040000>;
 106                                 read-only;
 107                         };
 108
 109                         partition@40000 {
 110                                 label = "u-boot-env";
 111                                 reg = <0x040000 0x010000>;
 112                                 read-only;
 113                         };
 114
 115                         partition@50000 {
 116                                 compatible = "denx,uimage";
 117                                 label = "firmware";
 118                                 reg = <0x050000 0x07a0000>;
 119                         };
 120
 121                         art: partition@7f0000 {
 122                                 label = "art";
 123                                 reg = <0x7f0000 0x010000>;
 124                                 read-only;
 125
 126                                 nvmem-layout {
 127                                         compatible = "fixed-layout";
 128                                         #address-cells = <1>;
 129                                         #size-cells = <1>;
 130
 131                                         macaddr_art_0: macaddr@0 {
 132                                                 compatible = "mac-base";
 133                                                 reg = <0x0 0x6>;
 134                                                 #nvmem-cell-cells = <1>;
 135                                         };
 136                                 };
 137                         };
 138                 };
 139         };
 140 };
 141
 142 &wmac {
 143         status = "okay";
 144
 145         mtd-cal-data = <&art 0x1000>;
 146 };
 147
 148 &eth0 {
 149         status = "okay";
 150
 151         phy-handle = <&swphy0>;
 152         nvmem-cells = <&macaddr_art_0 1>;
 153         nvmem-cell-names = "mac-address";
 154 };
 155
 156 &eth1 {
 157         phy-handle = <&swphy4>;
 158         pll-data = <0x06000000 0x00000101 0x00001616>;
 159
 160         nvmem-cells = <&macaddr_art_0 0>;
 161         nvmem-cell-names = "mac-address";
 162
 163         gmac-config {
 164                 device = <&gmac>;
 165                 switch-phy-swap = <1>;
 166         };
 167 };