target/linux/ath79/dts/qca9533_mikrotik_routerboard-95x.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca9533_mikrotik_routerboard-16m.dtsi"
   4
   5 / {
   6         aliases {
   7                 led-boot = &led_user;
   8                 led-failsafe = &led_user;
   9                 led-running = &led_user;
  10                 led-upgrade = &led_user;
  11         };
  12
  13         leds {
  14                 compatible = "gpio-leds";
  15
  16                 led_user: user {
  17                         label = "green:user";
  18                         gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
  19                 };
  20
  21                 port1 {
  22                         label = "green:port1";
  23                         gpios = <&gpio_ext 0 GPIO_ACTIVE_LOW>;
  24                 };
  25
  26                 port2 {
  27                         label = "green:port2";
  28                         gpios = <&gpio_ext 1 GPIO_ACTIVE_LOW>;
  29                 };
  30
  31                 port3 {
  32                         label = "green:port3";
  33                         gpios = <&gpio_ext 2 GPIO_ACTIVE_LOW>;
  34                 };
  35
  36                 port4 {
  37                         label = "green:port4";
  38                         gpios = <&gpio_ext 3 GPIO_ACTIVE_LOW>;
  39                 };
  40
  41                 port5 {
  42                         label = "green:port5";
  43                         gpios = <&gpio_ext 4 GPIO_ACTIVE_LOW>;
  44                 };
  45
  46         };
  47
  48         gpio-export {
  49                 compatible = "gpio-export";
  50
  51                 usb_power {
  52                         gpio-export,name = "usb-power";
  53                         gpio-export,output = <1>;
  54                         gpios = <&gpio_ext 5 GPIO_ACTIVE_LOW>;
  55                 };
  56
  57                 enable_poe_port5 {
  58                         gpio-export,name = "enable-poe:port5";
  59                         gpio-export,output = <0>;
  60                         gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
  61                 };
  62         };
  63 };
  64
  65 &spi {
  66         pinctrl-names = "default";
  67         pinctrl-0 = <&pin_spi_cs1>;
  68
  69         gpio_ext: gpio_ext@1 {
  70                 compatible = "fairchild,74hc595";
  71                 reg = <1>;
  72                 gpio-controller;
  73                 #gpio-cells = <2>;
  74                 registers-number = <1>;
  75                 spi-max-frequency = <25000000>;
  76         };
  77 };
  78
  79
  80 &pinmux {
  81         pin_spi_cs1: pinmux_spi_cs1 {
  82                 pinctrl-single,bits = <0x8 0x0a000000 0xff000000>;
  83         };
  84 };
  85
  86 &wmac {
  87         status = "okay";
  88
  89         qca,no-eeprom;
  90 };
  91
  92 &eth0 {
  93         status = "okay";
  94
  95         phy-handle = <&swphy4>;
  96 };
  97
  98 &usb0 {
  99         status = "okay";
 100 };
 101
 102 &usb_phy {
 103         status = "okay";
 104 };