target/linux/ath79/dts/qca9563_tplink_tl-wpa8630p-v2.0-eu.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca9563_tplink_tl-wpa8630.dtsi"
   4
   5 / {
   6         compatible = "tplink,tl-wpa8630p-v2.0-eu", "qca,qca9563";
   7         model = "TP-Link WPA8630P v2.0 (EU)";
   8
   9         aliases {
  10                 label-mac-device = &eth0;
  11         };
  12 };
  13
  14 &partitions {
  15         partition@0 {
  16                 label = "factory-uboot";
  17                 reg = <0x000000 0x020000>;
  18                 read-only;
  19         };
  20
  21         partition@20000 {
  22                 label = "u-boot";
  23                 reg = <0x020000 0x020000>;
  24                 read-only;
  25         };
  26
  27         partition@40000 {
  28                 compatible = "tplink,firmware";
  29                 label = "firmware";
  30                 reg = <0x040000 0x5e0000>;
  31         };
  32
  33         partition@620000 {
  34                 label = "partition-table";
  35                 reg = <0x620000 0x010000>;
  36                 read-only;
  37         };
  38
  39         info: partition@630000 {
  40                 label = "info";
  41                 reg = <0x630000 0x010000>;
  42                 read-only;
  43
  44                 nvmem-layout {
  45                         compatible = "fixed-layout";
  46                         #address-cells = <1>;
  47                         #size-cells = <1>;
  48
  49                         macaddr_info_8: macaddr@8 {
  50                                 compatible = "mac-base";
  51                                 reg = <0x8 0x6>;
  52                                 #nvmem-cell-cells = <1>;
  53                         };
  54                 };
  55         };
  56
  57         partition@640000 {
  58                 label = "tplink";
  59                 reg = <0x640000 0x1b0000>;
  60                 read-only;
  61         };
  62
  63         art: partition@7f0000 {
  64                 label = "art";
  65                 reg = <0x7f0000 0x010000>;
  66                 read-only;
  67
  68                 nvmem-layout {
  69                         compatible = "fixed-layout";
  70                         #address-cells = <1>;
  71                         #size-cells = <1>;
  72
  73                         precal_art_5000: pre-calibration@5000 {
  74                                 reg = <0x5000 0x2f20>;
  75                         };
  76                 };
  77         };
  78 };
  79
  80 &eth0 {
  81         nvmem-cells = <&macaddr_info_8 0>;
  82         nvmem-cell-names = "mac-address";
  83 };
  84
  85 &pcie {
  86         wifi@0,0 {
  87                 compatible = "qcom,ath10k";
  88                 reg = <0x0000 0 0 0 0>;
  89                 nvmem-cells = <&precal_art_5000>, <&macaddr_info_8 1>;
  90                 nvmem-cell-names = "pre-calibration", "mac-address";
  91         };
  92 };
  93
  94 &wmac {
  95         mtd-cal-data = <&art 0x1000>;
  96
  97         nvmem-cells = <&macaddr_info_8 0>;
  98         nvmem-cell-names = "mac-address";
  99 };