openwrt/svn-archive/archive.git
6 years agofstools: scripts should propagate the cmdline
John Crispin [Sat, 5 Apr 2014 16:34:40 +0000 (16:34 +0000)]
fstools: scripts should propagate the cmdline

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 40383

6 years agoubi-utils: fix git tree path, a regex went mad
John Crispin [Sat, 5 Apr 2014 16:34:30 +0000 (16:34 +0000)]
ubi-utils: fix git tree path, a regex went mad

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40382

6 years agolantiq: cleanup the dsl control scripts
John Crispin [Sat, 5 Apr 2014 16:34:20 +0000 (16:34 +0000)]
lantiq: cleanup the dsl control scripts

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40381

6 years agobrcm63xx: update development kernel to linux 3.14
Jonas Gorski [Fri, 4 Apr 2014 10:17:08 +0000 (10:17 +0000)]
brcm63xx: update development kernel to linux 3.14

Now that 3.13 will be EOL soon, switch to 3.14.

Known issues:
 * 74x164 is not available because upstream dropped non-DT support
 * jffs2 breaks with SMP

Unknown issues:
 * probably plenty

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 40380

6 years agokernel: fix bluetooth and zsmalloc for 3.14
Jonas Gorski [Fri, 4 Apr 2014 10:16:54 +0000 (10:16 +0000)]
kernel: fix bluetooth and zsmalloc for 3.14

zsmalloc was promoted from staging, while bluetooth gained a dependency
to a library shared with 802.15.4 for 6lowpan support.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 40379

6 years agokernel: fix usb module paths for 3.14
Jonas Gorski [Fri, 4 Apr 2014 10:16:52 +0000 (10:16 +0000)]
kernel: fix usb module paths for 3.14

dwc2 was promoted from staging, while u_rndis was merged into
usb_f_rndis.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 40378

6 years agokernel: fix kmod-sound-core for 3.14
Jonas Gorski [Fri, 4 Apr 2014 10:16:50 +0000 (10:16 +0000)]
kernel: fix kmod-sound-core for 3.14

pcm-page-alloc was merged into snd-pcm.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 40377

6 years agokernel: make sched_act_connmark compile for 3.14
Jonas Gorski [Fri, 4 Apr 2014 10:16:49 +0000 (10:16 +0000)]
kernel: make sched_act_connmark compile for 3.14

The upstream API changed, which allowed to simplify the code a bit.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 40376

6 years agokernel: make sched_esfq compile for 3.14
Jonas Gorski [Fri, 4 Apr 2014 10:16:47 +0000 (10:16 +0000)]
kernel: make sched_esfq compile for 3.14

net_random was replaced with prandom_u32.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 40375

6 years agokernel: add missing config symbol for linux 3.14
Jonas Gorski [Fri, 4 Apr 2014 10:16:44 +0000 (10:16 +0000)]
kernel: add missing config symbol for linux 3.14

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 40374

6 years agolantiq: nand fixes
John Crispin [Thu, 3 Apr 2014 14:27:02 +0000 (14:27 +0000)]
lantiq: nand fixes

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40372

6 years agolantiq: BT Home Hub 2B support - userspace
John Crispin [Thu, 3 Apr 2014 14:26:58 +0000 (14:26 +0000)]
lantiq: BT Home Hub 2B support - userspace

Basic userspace configuration for BT Home Hub 2B

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
SVN-Revision: 40371

6 years agolantiq: BT Home Hub 2B support - board support
John Crispin [Thu, 3 Apr 2014 14:26:54 +0000 (14:26 +0000)]
lantiq: BT Home Hub 2B support - board support

Board support patch for BT Home Hub 2B

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
SVN-Revision: 40370

6 years agolantiq: BT Home Hub 2B support - jedec probe
John Crispin [Thu, 3 Apr 2014 14:26:50 +0000 (14:26 +0000)]
lantiq: BT Home Hub 2B support - jedec probe

Lantiq nor patch. Adds support for jedec probing if cfi
probing fails.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
SVN-Revision: 40369

6 years agolantiq: make td8970 wifi led work
John Crispin [Thu, 3 Apr 2014 14:26:46 +0000 (14:26 +0000)]
lantiq: make td8970 wifi led work

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40368

6 years agoubi-utils: mini version of mtd-utils that only includes ubi tools
John Crispin [Thu, 3 Apr 2014 14:26:42 +0000 (14:26 +0000)]
ubi-utils: mini version of mtd-utils that only includes ubi tools

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40367

6 years agofstools: update to latest git
John Crispin [Thu, 3 Apr 2014 14:26:38 +0000 (14:26 +0000)]
fstools: update to latest git

this fixes ubifs and ubi overlay support

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40366

6 years agoinclude/make.mk: add support for ubinize-overlay.cfg
John Crispin [Thu, 3 Apr 2014 14:26:31 +0000 (14:26 +0000)]
include/make.mk: add support for ubinize-overlay.cfg

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40365

6 years agolantiq: fix vr9 ubi handling
John Crispin [Thu, 3 Apr 2014 14:26:24 +0000 (14:26 +0000)]
lantiq: fix vr9 ubi handling

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40364

6 years agox86: xen_domu is functional, remove broken flag
Felix Fietkau [Wed, 2 Apr 2014 20:45:09 +0000 (20:45 +0000)]
x86: xen_domu is functional, remove broken flag

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40363

6 years agomake printk, crashlog and swap support configurable
Imre Kaloz [Wed, 2 Apr 2014 11:40:41 +0000 (11:40 +0000)]
make printk, crashlog and swap support configurable

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 40361

6 years agoorion: create a macro for zImage with machine id
Florian Fainelli [Tue, 1 Apr 2014 22:21:11 +0000 (22:21 +0000)]
orion: create a macro for zImage with machine id

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 40360

6 years agoorion: fix KERNELNAME
Florian Fainelli [Tue, 1 Apr 2014 22:21:00 +0000 (22:21 +0000)]
orion: fix KERNELNAME

uImage cannot be built in parallel properly until zImage is ready

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 40359

6 years agoorion: fix initramfs uImage generation
Florian Fainelli [Tue, 1 Apr 2014 22:20:49 +0000 (22:20 +0000)]
orion: fix initramfs uImage generation

We would fail to copy an non-existent uImage-initramfs to $(BIN_DIR)

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 40358

6 years agobuildroot: add Cortex A15 specific CFLAGS
Florian Fainelli [Tue, 1 Apr 2014 22:20:36 +0000 (22:20 +0000)]
buildroot: add Cortex A15 specific CFLAGS

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 40357

6 years agoodhcpd: add preliminary support for managed DHCPv6-PD and CER-ID
Steven Barth [Tue, 1 Apr 2014 18:52:09 +0000 (18:52 +0000)]
odhcpd: add preliminary support for managed DHCPv6-PD and CER-ID

SVN-Revision: 40355

6 years ago3.14 final is out
Imre Kaloz [Mon, 31 Mar 2014 13:43:06 +0000 (13:43 +0000)]
3.14 final is out

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 40352

6 years agoodhcp6c: add preliminary CER-ID support
Steven Barth [Mon, 31 Mar 2014 06:43:50 +0000 (06:43 +0000)]
odhcp6c: add preliminary CER-ID support

SVN-Revision: 40351

6 years agogrub2: disable mkfont - fix build on Archlinux
Felix Fietkau [Sun, 30 Mar 2014 19:55:43 +0000 (19:55 +0000)]
grub2: disable mkfont - fix build on Archlinux

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 40350

6 years agogrub2: disable libdevmapper - fix build when it's available
Felix Fietkau [Sun, 30 Mar 2014 19:55:39 +0000 (19:55 +0000)]
grub2: disable libdevmapper - fix build when it's available

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 40349

6 years agokernel: backport BCM5357 fix for GPIOs
Hauke Mehrtens [Sun, 30 Mar 2014 19:08:37 +0000 (19:08 +0000)]
kernel: backport BCM5357 fix for GPIOs

This backports: bcma: gpio: register 32 GPIOs on BCM5357

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 40347

6 years agobrcm47xx: backport 3.14 patch for nvram GPIO pin read
Hauke Mehrtens [Sun, 30 Mar 2014 19:07:46 +0000 (19:07 +0000)]
brcm47xx: backport 3.14 patch for nvram GPIO pin read

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 40346

6 years agobrcm47xx: Name LEDs colors for Linksys E1000 V2.1
Hauke Mehrtens [Sun, 30 Mar 2014 19:07:13 +0000 (19:07 +0000)]
brcm47xx: Name LEDs colors for Linksys E1000 V2.1

Handle it by creating a new patch for simple database changes.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 40345

6 years agobrcm47xx: update workarounds patch to V3
Hauke Mehrtens [Sun, 30 Mar 2014 19:06:24 +0000 (19:06 +0000)]
brcm47xx: update workarounds patch to V3

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 40344

6 years agosamba36: revert r40341
John Crispin [Sun, 30 Mar 2014 19:05:25 +0000 (19:05 +0000)]
samba36: revert r40341

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40343

6 years agoralink: fix chuncked-io module
John Crispin [Sun, 30 Mar 2014 19:03:55 +0000 (19:03 +0000)]
ralink: fix chuncked-io module

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40342

6 years agosamba: update to 3.6.23
John Crispin [Sun, 30 Mar 2014 19:03:12 +0000 (19:03 +0000)]
samba: update to 3.6.23
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40341

6 years agolantiq: fix ptm crash under load
John Crispin [Sun, 30 Mar 2014 14:01:21 +0000 (14:01 +0000)]
lantiq: fix ptm crash under load

https://dev.openwrt.org/ticket/14581

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40335

6 years agokernel/modules: package Arabic charsets
John Crispin [Sun, 30 Mar 2014 13:08:00 +0000 (13:08 +0000)]
kernel/modules: package Arabic charsets

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 40334

6 years agokernel/modules: package Hebrew charsets
John Crispin [Sun, 30 Mar 2014 13:07:57 +0000 (13:07 +0000)]
kernel/modules: package Hebrew charsets

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 40333

6 years agodhcp: Fix broadcast parameter validation support, remove unused netmask parameter
John Crispin [Sun, 30 Mar 2014 13:07:52 +0000 (13:07 +0000)]
dhcp: Fix broadcast parameter validation support, remove unused netmask parameter

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
SVN-Revision: 40332

6 years agoutil-linux: add missing dependency
John Crispin [Sun, 30 Mar 2014 13:00:50 +0000 (13:00 +0000)]
util-linux: add missing dependency

https://dev.openwrt.org/ticket/15417

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40331

6 years agorevert: kernel: rtl8306: fix max pvid & remove port isolation
John Crispin [Sun, 30 Mar 2014 10:04:55 +0000 (10:04 +0000)]
revert: kernel: rtl8306: fix max pvid & remove port isolation

apparently this one was nt a good idea to merge

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40330

6 years agolntiq: add support for Astoria ARV7519RW.
John Crispin [Sun, 30 Mar 2014 10:02:30 +0000 (10:02 +0000)]
lntiq: add support for Astoria ARV7519RW.

These patches add support for the Astoria ARV7519RW aka Livebox 2.1
The PCI and PCIe interfaces have been disabled. Also, because there are
two revisions of this board with different GPHY firmwares, two targets
were defined.
V2: rewrote partitions to work with an u-boot specifically made for
these boards.

Signed off by: Esteban Benito <estebanjbs@gmail.com>
Signed off by: Carles Gadea <carlesgrg@gmail.com>
Tested by: José Vázquez Fernández <ppvazquezfer@gmail.com>

SVN-Revision: 40329

6 years agolantiq: do an endianness swap to the RT2860 eeprom for ARV752DPW(22)
John Crispin [Sun, 30 Mar 2014 09:16:52 +0000 (09:16 +0000)]
lantiq: do an endianness swap to the RT2860 eeprom for ARV752DPW(22)

ARV7510PW22, ARV752DPW and ARV752DPW22 have the RT2860 eeprom stored in
flash as big-endian, but the driver needs it in little-endian format. We
have to swab it before handing it over. This requires my earlier patch
for busybox.

Funnily enough, ARV752DPW works also with the incorrect eeprom, but
undoubtedly unoptimally. I have a hunch that also the final remaining
Lantiq board would require this swabbing, but I'm not sure, so I just
swab it in the three boards that I know about.

v2:
* Swab also on ARV7510PW22 based on feedback from Alvaro Rojas
* Fix the offset with bs=2

Signed-off-by: Matti Laakso <malaakso at elisanet.fi>
SVN-Revision: 40328

6 years agobusybox: backport dd conv=swab from 1.22
John Crispin [Sun, 30 Mar 2014 09:16:47 +0000 (09:16 +0000)]
busybox: backport dd conv=swab from 1.22

Some boards have the WLAN EEPROM stored in flash in big-endian format,
whereas the driver requires the EEPROM in little-endian format. The
conv=swab option in dd is particularly useful in this case. This patch
backports this feature from busybox-1.22 based on the following commits:

commit    b941316ae5313be523b64f0a9151ee4decb2b35b dd: support conv=swab
commit    8395bd3f52f8ed46fa3ffc316b2d113afa748bae dd: fix example in a
comment. No code changes.
commit    5b9910f0a4a1b7976c46e6f849aaa263180e5521 dd: fail if swab is
attempted on odd-sized block
commit    0ff0b320a2dbb5e0b5fa245ffd9b2648d7026843 dd: code shrink

v2: include the commit messages from upstream

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
SVN-Revision: 40327

6 years agolantiq: add esi
John Crispin [Sun, 30 Mar 2014 09:16:43 +0000 (09:16 +0000)]
lantiq: add esi

http://patchwork.openwrt.org/patch/3703/

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40326

6 years agoltq-adsl-mei: improve memory allocation
John Crispin [Sun, 30 Mar 2014 09:16:39 +0000 (09:16 +0000)]
ltq-adsl-mei: improve memory allocation

The ltq-adsl-mei driver allocates memory for the ADSL firmware in a
rather stupid way, leading to several 128k allocations, which fail when
many services are enabled. This patch tries to allocate 64 kiB chunks,
and only falls back to larger allocations if the returned pointers are
not correctly aligned. Fixes out-of-memory errors on Danube boards with
32 MiB RAM.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
SVN-Revision: 40325

6 years agolantiq: fix mtd_split for brnboot firmware images
John Crispin [Sun, 30 Mar 2014 09:16:35 +0000 (09:16 +0000)]
lantiq: fix mtd_split for brnboot firmware images

The existing code only tries to split a parition with name "rootfs"
while actually looking for kernel+rootfs, where usually "firmware" is
used as a partition name. This doesn't make sense, as even if there
was a partition 'rootfs' given by mtdparts or via device-tree, this
code would lead to another partition called 'rootfs' being created
which would not be properly distinguished in the current user-space
code.

While potentially we could use CONFIG_MTD_SPLIT_FIRMWARE_NAME to make
that configurable, the lack of users of brnboot and the fact that we
can freely decide the partition name made me simply change the
hard-coded string constant from "rootfs" to "firmware".

(I'm going to add support for ARV7506PW which run brnboot and needs
this change)

SVN-Revision: 40324

6 years agolantiq: fixup ath5k support
John Crispin [Sun, 30 Mar 2014 09:16:31 +0000 (09:16 +0000)]
lantiq: fixup ath5k support

http://patchwork.openwrt.org/patch/4417/

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40323

6 years agoltq-vdsl: add led status reporting
John Crispin [Sun, 30 Mar 2014 09:16:27 +0000 (09:16 +0000)]
ltq-vdsl: add led status reporting

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40322

6 years agolantiq: fix initial VLAN conf for P2601HNFX
John Crispin [Sun, 30 Mar 2014 09:16:23 +0000 (09:16 +0000)]
lantiq: fix initial VLAN conf for P2601HNFX

Signed-off-by: Antonios Vamporakis <ant@area128.com>
SVN-Revision: 40321

6 years agolantiq: P2601HNFX dts update for STP and buttons
John Crispin [Sun, 30 Mar 2014 09:16:19 +0000 (09:16 +0000)]
lantiq: P2601HNFX dts update for STP and buttons

- Set correct AltSel for STP pins
- Set front button to rfkill

Signed-off-by: Antonios Vamporakis <ant@area128.com>
SVN-Revision: 40320

6 years agolantiq: add support for Arcadyan ARV7519PW
John Crispin [Sun, 30 Mar 2014 09:16:15 +0000 (09:16 +0000)]
lantiq: add support for Arcadyan ARV7519PW

This patch adds almost full support for this board.

- WiFi is still not working
- USB will not power up. According to some reports, it may be a passive port

Signed-off-by: Antonios Vamporakis <ant@area128.com>
SVN-Revision: 40319

6 years agolantiq: reset gphys on reboot
John Crispin [Sun, 30 Mar 2014 09:16:10 +0000 (09:16 +0000)]
lantiq: reset gphys on reboot

If gphys are not reset upstream uboot can not use them anymore.

Signed-off-by: Antonios Vamporakis <ant@area128.com>
SVN-Revision: 40318

6 years agolantiq: add support for ZyXEL P2812HNUFX
John Crispin [Sun, 30 Mar 2014 09:16:06 +0000 (09:16 +0000)]
lantiq: add support for ZyXEL P2812HNUFX

This patch adds almost full support for this board. WiFi is still not working.
The FXS ports are not functional due to missing support for the TAPI driver on
VR9 SoC.

Signed-off-by: Antonios Vamporakis <ant@area128.com>
Tested-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 40317

6 years agolantiq: add ubifs support in image Makefile
John Crispin [Sun, 30 Mar 2014 09:16:02 +0000 (09:16 +0000)]
lantiq: add ubifs support in image Makefile

Signed-off-by: Antonios Vamporakis <ant@area128.com>
SVN-Revision: 40316

6 years agolantiq: add ubifs to FEATURES
John Crispin [Sun, 30 Mar 2014 09:15:58 +0000 (09:15 +0000)]
lantiq: add ubifs to FEATURES

Signed-off-by: Antonios Vamporakis <ant@area128.com>
SVN-Revision: 40315

6 years agolantiq: xrx200: add ubi support in the kernel
John Crispin [Sun, 30 Mar 2014 09:15:54 +0000 (09:15 +0000)]
lantiq: xrx200: add ubi support in the kernel

Signed-off-by: Antonios Vamporakis <ant@area128.com>
SVN-Revision: 40314

6 years agolantiq: add inital support for xrx200 switch
John Crispin [Sun, 30 Mar 2014 09:15:50 +0000 (09:15 +0000)]
lantiq: add inital support for xrx200 switch

Signed-off-by: Antonios Vamporakis <ant@area128.com>
SVN-Revision: 40313

6 years agolantiq: xrx200: fix duplex
John Crispin [Sun, 30 Mar 2014 09:15:46 +0000 (09:15 +0000)]
lantiq: xrx200: fix duplex

Both the GPL driver from ZyXEL and the xrx200 driver have this error. The flags
are reversed. Full duplex is marked as half and the other way around. With this
fix the switch will push full GBit speeds.

Signed-off-by: Antonios Vamporakis <ant@area128.com>
SVN-Revision: 40312

6 years agolantiq: fixup 3370 dts file
John Crispin [Sun, 30 Mar 2014 09:15:41 +0000 (09:15 +0000)]
lantiq: fixup 3370 dts file

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40311

6 years agolantiq: fix nand/ebu locking
John Crispin [Sun, 30 Mar 2014 09:15:37 +0000 (09:15 +0000)]
lantiq: fix nand/ebu locking

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40310

6 years agolantiq: add tffs driver
John Crispin [Sun, 30 Mar 2014 09:15:33 +0000 (09:15 +0000)]
lantiq: add tffs driver

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40309

6 years agoltq-vdsl: fix MIPS16 compile breakage
John Crispin [Sun, 30 Mar 2014 09:15:29 +0000 (09:15 +0000)]
ltq-vdsl: fix MIPS16 compile breakage

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40308

6 years agofirmware: create a new folder for holfing firmware blobs
John Crispin [Sun, 30 Mar 2014 09:15:25 +0000 (09:15 +0000)]
firmware: create a new folder for holfing firmware blobs

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40307

6 years agokernel: export gluebi info to sysfs
John Crispin [Sun, 30 Mar 2014 09:15:20 +0000 (09:15 +0000)]
kernel: export gluebi info to sysfs

Export the ubi_num and vol_id into the sysfs record of the gluebi-
emulated mtd device. Previously userspace didn't have a way to
map gluebi-emulated devices back to their corresponding ubi volumes.

SVN-Revision: 40306

6 years agokernel: rtl8306: fix vlan support on lantiq ar9 p2601hnfx
John Crispin [Sun, 30 Mar 2014 09:15:16 +0000 (09:15 +0000)]
kernel: rtl8306: fix vlan support on lantiq ar9 p2601hnfx

If the CPU port is not forced up, the link, at least on this board, is lost after
changes are applied. This makes sure that the link is restored. Regression tests
should confirm it doesn't break other boards.

Signed-off-by: Antonios Vamporakis <ant@area128.com>
SVN-Revision: 40305

6 years agokernel: rtl8306: fix max pvid & remove port isolation
John Crispin [Sun, 30 Mar 2014 09:15:11 +0000 (09:15 +0000)]
kernel: rtl8306: fix max pvid & remove port isolation

- hide port pvid - vlan index relation
- switch initialises with vlans disabled so port isolation is not used
- remove special treatment of cpu port

Signed-off-by: Antonios Vamporakis <ant@area128.com>
SVN-Revision: 40304

6 years agokernel: rtl8306: cosmetic changes for swconfig
John Crispin [Sun, 30 Mar 2014 09:15:07 +0000 (09:15 +0000)]
kernel: rtl8306: cosmetic changes for swconfig

Changes to:
- show the correct "enable_vlan" value under "Global attributes"
- show tagged ports under "Vlan: ports"
- use get_port_link method to report link status

Signed-off-by: Antonios Vamporakis <ant@area128.com>
SVN-Revision: 40303

6 years agoutil-linux: backport upstream fix for unshare utility
John Crispin [Sun, 30 Mar 2014 09:15:03 +0000 (09:15 +0000)]
util-linux: backport upstream fix for unshare utility

the unshare utility wasn't getting certain defines for mount
anymore.

SVN-Revision: 40302

6 years agomtd: improve mtd detection
John Crispin [Sun, 30 Mar 2014 09:14:58 +0000 (09:14 +0000)]
mtd: improve mtd detection

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40301

6 years agodropbear: move options.h editing to Build/Configure
Felix Fietkau [Sat, 29 Mar 2014 17:10:52 +0000 (17:10 +0000)]
dropbear: move options.h editing to Build/Configure

fixes incremental build with change to CONFIG_DROPBEAR_ECC
drop --with-shared which is unknown to configure

Patch by Catalin Patulea <cat@vv.carleton.ca>

SVN-Revision: 40300

6 years agodropbear: add options SSHKeepAlive and IdleTimeout.
Felix Fietkau [Sat, 29 Mar 2014 17:05:35 +0000 (17:05 +0000)]
dropbear: add options SSHKeepAlive and IdleTimeout.

Without timeout mechanism, if ssh client disconnected without sending
FIN or RST, forked dropbear servers would hang there for
KEX_RETRY_TIMEOUT seconds (8 hours).

TCP keepalive is not implemented in dropbear yet, thus the name
SSHKeepAlive.

300 seconds in this patch is selected from the default value of
ServerAliveInterval for Debian ssh client (See man ssh_config).

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 40299

6 years agodropbear: fix interface config setting
Felix Fietkau [Sat, 29 Mar 2014 16:59:33 +0000 (16:59 +0000)]
dropbear: fix interface config setting

Patch from #15070

SVN-Revision: 40298

6 years agodropbear: update to 2014.63
Felix Fietkau [Sat, 29 Mar 2014 16:59:26 +0000 (16:59 +0000)]
dropbear: update to 2014.63

Upstream changelog:
https://matt.ucc.asn.au/dropbear/CHANGES

This adds elliptic curve cryptography (ECC) support as an option, disabled
by default.

dropbear mips 34kc uClibc binary size:
before: 161,672 bytes
after, without ECC (default): 164,968
after, with ECC: 198,008

Signed-off-by: Catalin Patulea <cat@vv.carleton.ca>
SVN-Revision: 40297

6 years agomac80211: skip antenna gain when compiling regdb.txt (#15397)
Jo-Philipp Wich [Fri, 28 Mar 2014 16:05:46 +0000 (16:05 +0000)]
mac80211: skip antenna gain when compiling regdb.txt (#15397)

The antenna gain attribute has been removed from the upstream regulatory database.
Incorperate patch from Luis R. Rodriguez to skip the parsing of the gain attribute
in genregdb.awk in order to emit proper rules again.

Also refresh fuzzy patches while we're at it.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 40296

6 years agoubox: fix logd (hopefully)
John Crispin [Thu, 27 Mar 2014 13:36:01 +0000 (13:36 +0000)]
ubox: fix logd (hopefully)

https://dev.openwrt.org/ticket/15357

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40295

6 years agolantiq: drop old svip folders
John Crispin [Thu, 27 Mar 2014 13:34:56 +0000 (13:34 +0000)]
lantiq: drop old svip folders

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40294

6 years ago[mac80211]: update regulatory database to 2013-11-27
Imre Kaloz [Thu, 27 Mar 2014 11:28:51 +0000 (11:28 +0000)]
[mac80211]: update regulatory database to 2013-11-27

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 40293

6 years agokernel: update 3.10 to 3.10.34
Gabor Juhos [Thu, 27 Mar 2014 09:28:33 +0000 (09:28 +0000)]
kernel: update 3.10 to 3.10.34

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40291

6 years agoar71xx: build image for TL-WDR4300v1 (IL)
Gabor Juhos [Thu, 27 Mar 2014 06:36:59 +0000 (06:36 +0000)]
ar71xx: build image for TL-WDR4300v1 (IL)

The version of TL-WDR4300 sold in Israel comes with a different
hardware id.

Patch-by: Daniel <daniel@makrotopia.org>
Patchwork: http://patchwork.openwrt.org/patch/5001/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40038

6 years agofirmware-utils/mktplinkfw: add support for TL-WDR4300v1 (IL)
Gabor Juhos [Thu, 27 Mar 2014 06:36:58 +0000 (06:36 +0000)]
firmware-utils/mktplinkfw: add support for TL-WDR4300v1 (IL)

The version of TL-WDR4300 sold in Israel comes with a different
hardware id.

Patch-by: Daniel <daniel@makrotopia.org>
Patchwork: http://patchwork.openwrt.org/patch/5001/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40037

6 years agoar71xx: add profile and build firmware image for the Oolite v1 board
Gabor Juhos [Thu, 27 Mar 2014 06:36:57 +0000 (06:36 +0000)]
ar71xx: add profile and build firmware image for the Oolite v1 board

Patch-by: Lars Bøgild Thomsen <lth@cow.dk>
Patchwork: http://patchwork.openwrt.org/patch/4922/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40036

6 years agofirmware-utils/mktplinkfw: add support for the Oolite v1 board
Gabor Juhos [Thu, 27 Mar 2014 06:36:49 +0000 (06:36 +0000)]
firmware-utils/mktplinkfw: add support for the Oolite v1 board

Patch-by: Lars Bøgild Thomsen <lth@cow.dk>
Patchwork: http://patchwork.openwrt.org/patch/4922/
[juhosg: fix whitespaces]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40035

6 years agofirmware-utils/mktplinkfw: add an option to generate 16MiB images
Gabor Juhos [Thu, 27 Mar 2014 06:36:48 +0000 (06:36 +0000)]
firmware-utils/mktplinkfw: add an option to generate 16MiB images

Signed-off-by: Andrew 'Necromant' Andrianov <andrew@ncrmnt.org>
Patchwork: http://patchwork.openwrt.org/patch/2449/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40034

6 years agoar71xx: add user space support for the Oolite v1 board
Gabor Juhos [Thu, 27 Mar 2014 06:36:47 +0000 (06:36 +0000)]
ar71xx: add user space support for the Oolite v1 board

Patch-by: Lars Bøgild Thomsen <lth@cow.dk>
Patchwork: http://patchwork.openwrt.org/patch/4922/
[juhosg: use correct board name in uci-defaults/02_network]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40033

6 years agoar71xx: add kernel support for the Oolite v1 board
Gabor Juhos [Thu, 27 Mar 2014 06:36:46 +0000 (06:36 +0000)]
ar71xx: add kernel support for the Oolite v1 board

Patch-by: Lars Bøgild Thomsen <lth@cow.dk>
Patchwork: http://patchwork.openwrt.org/patch/4922/
[juhosg:
 - use a separate patch for kernel changes,
 - reorder Kconfig and Makefile entries,
 - change function and variable names to be lowercase only
   and fix misaligned tabs in mach-gs-oolite.c,
   ... ]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40032

6 years agoar71xx: rename RB951Ui specific kernel patch
Gabor Juhos [Thu, 27 Mar 2014 06:35:55 +0000 (06:35 +0000)]
ar71xx: rename RB951Ui specific kernel patch

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40031

6 years agofeeds.conf.default: fix copy&paste mistake (#15383)
Felix Fietkau [Wed, 26 Mar 2014 19:26:32 +0000 (19:26 +0000)]
feeds.conf.default: fix copy&paste mistake (#15383)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40030

6 years agofeeds: switch to using http(s) urls
Felix Fietkau [Wed, 26 Mar 2014 16:08:09 +0000 (16:08 +0000)]
feeds: switch to using http(s) urls

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40028

6 years agousbmode: switch to http:// instead of git://
Felix Fietkau [Wed, 26 Mar 2014 16:08:06 +0000 (16:08 +0000)]
usbmode: switch to http:// instead of git://

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40027

6 years agojsonpath: switch to http:// instead of git://
Felix Fietkau [Wed, 26 Mar 2014 16:08:02 +0000 (16:08 +0000)]
jsonpath: switch to http:// instead of git://

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40026

6 years agolibubox: switch to git.openwrt.org as source
Felix Fietkau [Wed, 26 Mar 2014 16:07:58 +0000 (16:07 +0000)]
libubox: switch to git.openwrt.org as source

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40025

6 years ago[generic/3.14]: update to 3.14-rc8
Imre Kaloz [Wed, 26 Mar 2014 14:14:20 +0000 (14:14 +0000)]
[generic/3.14]: update to 3.14-rc8

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 40023

6 years agoupgrade 3.13 targets to 3.13.7
Imre Kaloz [Wed, 26 Mar 2014 11:34:39 +0000 (11:34 +0000)]
upgrade 3.13 targets to 3.13.7

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 40022

6 years agomtd: add support for bad blocks in NAND flash
Felix Fietkau [Wed, 26 Mar 2014 10:50:09 +0000 (10:50 +0000)]
mtd: add support for bad blocks in NAND flash

NAND flash is very likely to contain bad blocks.

Currently, mtd and therefore sysupgrade fails when it encounters a single bad block, potentially leaving an unbootable system.

This patch allows the mtd utility to skip bad blocks in NAND flash and complete sysupgrade successfully.

Patch by: Matthew Redfearn <matt.redfearn@nxp.com>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40021

6 years ago6rd / ds-lite: make the firewall-zones of nested-protocols configurable
Steven Barth [Wed, 26 Mar 2014 10:12:49 +0000 (10:12 +0000)]
6rd / ds-lite: make the firewall-zones of nested-protocols configurable

SVN-Revision: 40020

6 years agodhcp: send 6rd-ORO when expecting 6rd-information
Steven Barth [Wed, 26 Mar 2014 09:48:20 +0000 (09:48 +0000)]
dhcp: send 6rd-ORO when expecting 6rd-information

SVN-Revision: 40019

6 years agofs-tools: add back mount_root, jffs2reset and ffs2mark functionality
John Crispin [Tue, 25 Mar 2014 20:15:50 +0000 (20:15 +0000)]
fs-tools: add back mount_root, jffs2reset and ffs2mark functionality

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40018